From a9ec941dca175a037b20bbe596fe7498e592f75c Mon Sep 17 00:00:00 2001 From: Bob McWhirter Date: Tue, 25 May 2021 14:47:07 -0400 Subject: i2c v1 --- embassy-stm32/Cargo.toml | 1009 +- embassy-stm32/src/i2c/mod.rs | 4 + embassy-stm32/src/i2c/v1.rs | 405 + embassy-stm32/src/pac/regs.rs | 43949 +++++++++++++++++---------------- embassy-stm32/src/pac/stm32f401cb.rs | 34 +- embassy-stm32/src/pac/stm32f401cc.rs | 34 +- embassy-stm32/src/pac/stm32f401cd.rs | 34 +- embassy-stm32/src/pac/stm32f401ce.rs | 34 +- embassy-stm32/src/pac/stm32f401rb.rs | 34 +- embassy-stm32/src/pac/stm32f401rc.rs | 34 +- embassy-stm32/src/pac/stm32f401rd.rs | 34 +- embassy-stm32/src/pac/stm32f401re.rs | 34 +- embassy-stm32/src/pac/stm32f401vb.rs | 34 +- embassy-stm32/src/pac/stm32f401vc.rs | 34 +- embassy-stm32/src/pac/stm32f401vd.rs | 34 +- embassy-stm32/src/pac/stm32f401ve.rs | 34 +- embassy-stm32/src/pac/stm32f405oe.rs | 44 +- embassy-stm32/src/pac/stm32f405og.rs | 44 +- embassy-stm32/src/pac/stm32f405rg.rs | 44 +- embassy-stm32/src/pac/stm32f405vg.rs | 44 +- embassy-stm32/src/pac/stm32f405zg.rs | 44 +- embassy-stm32/src/pac/stm32f407ie.rs | 44 +- embassy-stm32/src/pac/stm32f407ig.rs | 44 +- embassy-stm32/src/pac/stm32f407ve.rs | 44 +- embassy-stm32/src/pac/stm32f407vg.rs | 44 +- embassy-stm32/src/pac/stm32f407ze.rs | 44 +- embassy-stm32/src/pac/stm32f407zg.rs | 44 +- embassy-stm32/src/pac/stm32f410c8.rs | 24 +- embassy-stm32/src/pac/stm32f410cb.rs | 24 +- embassy-stm32/src/pac/stm32f410r8.rs | 24 +- embassy-stm32/src/pac/stm32f410rb.rs | 24 +- embassy-stm32/src/pac/stm32f410t8.rs | 24 +- embassy-stm32/src/pac/stm32f410tb.rs | 24 +- embassy-stm32/src/pac/stm32f411cc.rs | 36 +- embassy-stm32/src/pac/stm32f411ce.rs | 36 +- embassy-stm32/src/pac/stm32f411rc.rs | 36 +- embassy-stm32/src/pac/stm32f411re.rs | 36 +- embassy-stm32/src/pac/stm32f411vc.rs | 36 +- embassy-stm32/src/pac/stm32f411ve.rs | 36 +- embassy-stm32/src/pac/stm32f412ce.rs | 43 +- embassy-stm32/src/pac/stm32f412cg.rs | 43 +- embassy-stm32/src/pac/stm32f412re.rs | 43 +- embassy-stm32/src/pac/stm32f412rg.rs | 43 +- embassy-stm32/src/pac/stm32f412ve.rs | 44 +- embassy-stm32/src/pac/stm32f412vg.rs | 44 +- embassy-stm32/src/pac/stm32f412ze.rs | 44 +- embassy-stm32/src/pac/stm32f412zg.rs | 44 +- embassy-stm32/src/pac/stm32f413cg.rs | 44 +- embassy-stm32/src/pac/stm32f413ch.rs | 44 +- embassy-stm32/src/pac/stm32f413mg.rs | 44 +- embassy-stm32/src/pac/stm32f413mh.rs | 44 +- embassy-stm32/src/pac/stm32f413rg.rs | 44 +- embassy-stm32/src/pac/stm32f413rh.rs | 44 +- embassy-stm32/src/pac/stm32f413vg.rs | 44 +- embassy-stm32/src/pac/stm32f413vh.rs | 44 +- embassy-stm32/src/pac/stm32f413zg.rs | 44 +- embassy-stm32/src/pac/stm32f413zh.rs | 44 +- embassy-stm32/src/pac/stm32f415og.rs | 44 +- embassy-stm32/src/pac/stm32f415rg.rs | 44 +- embassy-stm32/src/pac/stm32f415vg.rs | 44 +- embassy-stm32/src/pac/stm32f415zg.rs | 44 +- embassy-stm32/src/pac/stm32f417ie.rs | 44 +- embassy-stm32/src/pac/stm32f417ig.rs | 44 +- embassy-stm32/src/pac/stm32f417ve.rs | 44 +- embassy-stm32/src/pac/stm32f417vg.rs | 44 +- embassy-stm32/src/pac/stm32f417ze.rs | 44 +- embassy-stm32/src/pac/stm32f417zg.rs | 44 +- embassy-stm32/src/pac/stm32f423ch.rs | 44 +- embassy-stm32/src/pac/stm32f423mh.rs | 44 +- embassy-stm32/src/pac/stm32f423rh.rs | 44 +- embassy-stm32/src/pac/stm32f423vh.rs | 44 +- embassy-stm32/src/pac/stm32f423zh.rs | 44 +- embassy-stm32/src/pac/stm32f427ag.rs | 44 +- embassy-stm32/src/pac/stm32f427ai.rs | 44 +- embassy-stm32/src/pac/stm32f427ig.rs | 44 +- embassy-stm32/src/pac/stm32f427ii.rs | 44 +- embassy-stm32/src/pac/stm32f427vg.rs | 43 +- embassy-stm32/src/pac/stm32f427vi.rs | 43 +- embassy-stm32/src/pac/stm32f427zg.rs | 44 +- embassy-stm32/src/pac/stm32f427zi.rs | 44 +- embassy-stm32/src/pac/stm32f429ag.rs | 44 +- embassy-stm32/src/pac/stm32f429ai.rs | 44 +- embassy-stm32/src/pac/stm32f429be.rs | 44 +- embassy-stm32/src/pac/stm32f429bg.rs | 44 +- embassy-stm32/src/pac/stm32f429bi.rs | 44 +- embassy-stm32/src/pac/stm32f429ie.rs | 44 +- embassy-stm32/src/pac/stm32f429ig.rs | 44 +- embassy-stm32/src/pac/stm32f429ii.rs | 44 +- embassy-stm32/src/pac/stm32f429ne.rs | 44 +- embassy-stm32/src/pac/stm32f429ng.rs | 44 +- embassy-stm32/src/pac/stm32f429ni.rs | 44 +- embassy-stm32/src/pac/stm32f429ve.rs | 43 +- embassy-stm32/src/pac/stm32f429vg.rs | 43 +- embassy-stm32/src/pac/stm32f429vi.rs | 43 +- embassy-stm32/src/pac/stm32f429ze.rs | 44 +- embassy-stm32/src/pac/stm32f429zg.rs | 44 +- embassy-stm32/src/pac/stm32f429zi.rs | 44 +- embassy-stm32/src/pac/stm32f437ai.rs | 44 +- embassy-stm32/src/pac/stm32f437ig.rs | 44 +- embassy-stm32/src/pac/stm32f437ii.rs | 44 +- embassy-stm32/src/pac/stm32f437vg.rs | 43 +- embassy-stm32/src/pac/stm32f437vi.rs | 43 +- embassy-stm32/src/pac/stm32f437zg.rs | 44 +- embassy-stm32/src/pac/stm32f437zi.rs | 44 +- embassy-stm32/src/pac/stm32f439ai.rs | 44 +- embassy-stm32/src/pac/stm32f439bg.rs | 44 +- embassy-stm32/src/pac/stm32f439bi.rs | 44 +- embassy-stm32/src/pac/stm32f439ig.rs | 44 +- embassy-stm32/src/pac/stm32f439ii.rs | 44 +- embassy-stm32/src/pac/stm32f439ng.rs | 44 +- embassy-stm32/src/pac/stm32f439ni.rs | 44 +- embassy-stm32/src/pac/stm32f439vg.rs | 43 +- embassy-stm32/src/pac/stm32f439vi.rs | 43 +- embassy-stm32/src/pac/stm32f439zg.rs | 44 +- embassy-stm32/src/pac/stm32f439zi.rs | 44 +- embassy-stm32/src/pac/stm32f446mc.rs | 43 +- embassy-stm32/src/pac/stm32f446me.rs | 43 +- embassy-stm32/src/pac/stm32f446rc.rs | 43 +- embassy-stm32/src/pac/stm32f446re.rs | 43 +- embassy-stm32/src/pac/stm32f446vc.rs | 43 +- embassy-stm32/src/pac/stm32f446ve.rs | 43 +- embassy-stm32/src/pac/stm32f446zc.rs | 43 +- embassy-stm32/src/pac/stm32f446ze.rs | 43 +- embassy-stm32/src/pac/stm32f469ae.rs | 43 +- embassy-stm32/src/pac/stm32f469ag.rs | 43 +- embassy-stm32/src/pac/stm32f469ai.rs | 43 +- embassy-stm32/src/pac/stm32f469be.rs | 43 +- embassy-stm32/src/pac/stm32f469bg.rs | 43 +- embassy-stm32/src/pac/stm32f469bi.rs | 43 +- embassy-stm32/src/pac/stm32f469ie.rs | 43 +- embassy-stm32/src/pac/stm32f469ig.rs | 43 +- embassy-stm32/src/pac/stm32f469ii.rs | 43 +- embassy-stm32/src/pac/stm32f469ne.rs | 43 +- embassy-stm32/src/pac/stm32f469ng.rs | 43 +- embassy-stm32/src/pac/stm32f469ni.rs | 43 +- embassy-stm32/src/pac/stm32f469ve.rs | 43 +- embassy-stm32/src/pac/stm32f469vg.rs | 43 +- embassy-stm32/src/pac/stm32f469vi.rs | 43 +- embassy-stm32/src/pac/stm32f469ze.rs | 43 +- embassy-stm32/src/pac/stm32f469zg.rs | 43 +- embassy-stm32/src/pac/stm32f469zi.rs | 43 +- embassy-stm32/src/pac/stm32f479ag.rs | 43 +- embassy-stm32/src/pac/stm32f479ai.rs | 43 +- embassy-stm32/src/pac/stm32f479bg.rs | 43 +- embassy-stm32/src/pac/stm32f479bi.rs | 43 +- embassy-stm32/src/pac/stm32f479ig.rs | 43 +- embassy-stm32/src/pac/stm32f479ii.rs | 43 +- embassy-stm32/src/pac/stm32f479ng.rs | 43 +- embassy-stm32/src/pac/stm32f479ni.rs | 43 +- embassy-stm32/src/pac/stm32f479vg.rs | 43 +- embassy-stm32/src/pac/stm32f479vi.rs | 43 +- embassy-stm32/src/pac/stm32f479zg.rs | 43 +- embassy-stm32/src/pac/stm32f479zi.rs | 43 +- embassy-stm32/src/pac/stm32h723ve.rs | 24 +- embassy-stm32/src/pac/stm32h723vg.rs | 24 +- embassy-stm32/src/pac/stm32h723ze.rs | 24 +- embassy-stm32/src/pac/stm32h723zg.rs | 24 +- embassy-stm32/src/pac/stm32h725ae.rs | 24 +- embassy-stm32/src/pac/stm32h725ag.rs | 24 +- embassy-stm32/src/pac/stm32h725ie.rs | 24 +- embassy-stm32/src/pac/stm32h725ig.rs | 24 +- embassy-stm32/src/pac/stm32h725re.rs | 24 +- embassy-stm32/src/pac/stm32h725rg.rs | 24 +- embassy-stm32/src/pac/stm32h725ve.rs | 24 +- embassy-stm32/src/pac/stm32h725vg.rs | 24 +- embassy-stm32/src/pac/stm32h725ze.rs | 24 +- embassy-stm32/src/pac/stm32h725zg.rs | 24 +- embassy-stm32/src/pac/stm32h730ab.rs | 24 +- embassy-stm32/src/pac/stm32h730ib.rs | 24 +- embassy-stm32/src/pac/stm32h730vb.rs | 24 +- embassy-stm32/src/pac/stm32h730zb.rs | 24 +- embassy-stm32/src/pac/stm32h733vg.rs | 24 +- embassy-stm32/src/pac/stm32h733zg.rs | 24 +- embassy-stm32/src/pac/stm32h735ag.rs | 24 +- embassy-stm32/src/pac/stm32h735ig.rs | 24 +- embassy-stm32/src/pac/stm32h735rg.rs | 24 +- embassy-stm32/src/pac/stm32h735vg.rs | 24 +- embassy-stm32/src/pac/stm32h735zg.rs | 24 +- embassy-stm32/src/pac/stm32h742ag.rs | 22 +- embassy-stm32/src/pac/stm32h742ai.rs | 22 +- embassy-stm32/src/pac/stm32h742bg.rs | 22 +- embassy-stm32/src/pac/stm32h742bi.rs | 22 +- embassy-stm32/src/pac/stm32h742ig.rs | 22 +- embassy-stm32/src/pac/stm32h742ii.rs | 22 +- embassy-stm32/src/pac/stm32h742vg.rs | 22 +- embassy-stm32/src/pac/stm32h742vi.rs | 22 +- embassy-stm32/src/pac/stm32h742xg.rs | 22 +- embassy-stm32/src/pac/stm32h742xi.rs | 22 +- embassy-stm32/src/pac/stm32h742zg.rs | 22 +- embassy-stm32/src/pac/stm32h742zi.rs | 22 +- embassy-stm32/src/pac/stm32h743ag.rs | 22 +- embassy-stm32/src/pac/stm32h743ai.rs | 22 +- embassy-stm32/src/pac/stm32h743bg.rs | 22 +- embassy-stm32/src/pac/stm32h743bi.rs | 22 +- embassy-stm32/src/pac/stm32h743ig.rs | 22 +- embassy-stm32/src/pac/stm32h743ii.rs | 22 +- embassy-stm32/src/pac/stm32h743vg.rs | 22 +- embassy-stm32/src/pac/stm32h743vi.rs | 22 +- embassy-stm32/src/pac/stm32h743xg.rs | 22 +- embassy-stm32/src/pac/stm32h743xi.rs | 22 +- embassy-stm32/src/pac/stm32h743zg.rs | 22 +- embassy-stm32/src/pac/stm32h743zi.rs | 22 +- embassy-stm32/src/pac/stm32h745bg.rs | 22 +- embassy-stm32/src/pac/stm32h745bi.rs | 22 +- embassy-stm32/src/pac/stm32h745ig.rs | 22 +- embassy-stm32/src/pac/stm32h745ii.rs | 22 +- embassy-stm32/src/pac/stm32h745xg.rs | 22 +- embassy-stm32/src/pac/stm32h745xi.rs | 22 +- embassy-stm32/src/pac/stm32h745zg.rs | 22 +- embassy-stm32/src/pac/stm32h745zi.rs | 22 +- embassy-stm32/src/pac/stm32h747ag.rs | 22 +- embassy-stm32/src/pac/stm32h747ai.rs | 22 +- embassy-stm32/src/pac/stm32h747bg.rs | 22 +- embassy-stm32/src/pac/stm32h747bi.rs | 22 +- embassy-stm32/src/pac/stm32h747ig.rs | 22 +- embassy-stm32/src/pac/stm32h747ii.rs | 22 +- embassy-stm32/src/pac/stm32h747xg.rs | 22 +- embassy-stm32/src/pac/stm32h747xi.rs | 22 +- embassy-stm32/src/pac/stm32h747zi.rs | 22 +- embassy-stm32/src/pac/stm32h750ib.rs | 22 +- embassy-stm32/src/pac/stm32h750vb.rs | 22 +- embassy-stm32/src/pac/stm32h750xb.rs | 22 +- embassy-stm32/src/pac/stm32h750zb.rs | 22 +- embassy-stm32/src/pac/stm32h753ai.rs | 22 +- embassy-stm32/src/pac/stm32h753bi.rs | 22 +- embassy-stm32/src/pac/stm32h753ii.rs | 22 +- embassy-stm32/src/pac/stm32h753vi.rs | 22 +- embassy-stm32/src/pac/stm32h753xi.rs | 22 +- embassy-stm32/src/pac/stm32h753zi.rs | 22 +- embassy-stm32/src/pac/stm32h755bi.rs | 22 +- embassy-stm32/src/pac/stm32h755ii.rs | 22 +- embassy-stm32/src/pac/stm32h755xi.rs | 22 +- embassy-stm32/src/pac/stm32h755zi.rs | 22 +- embassy-stm32/src/pac/stm32h757ai.rs | 22 +- embassy-stm32/src/pac/stm32h757bi.rs | 22 +- embassy-stm32/src/pac/stm32h757ii.rs | 22 +- embassy-stm32/src/pac/stm32h757xi.rs | 22 +- embassy-stm32/src/pac/stm32h757zi.rs | 22 +- embassy-stm32/src/pac/stm32h7a3ag.rs | 22 +- embassy-stm32/src/pac/stm32h7a3ai.rs | 22 +- embassy-stm32/src/pac/stm32h7a3ig.rs | 22 +- embassy-stm32/src/pac/stm32h7a3ii.rs | 22 +- embassy-stm32/src/pac/stm32h7a3lg.rs | 22 +- embassy-stm32/src/pac/stm32h7a3li.rs | 22 +- embassy-stm32/src/pac/stm32h7a3ng.rs | 22 +- embassy-stm32/src/pac/stm32h7a3ni.rs | 22 +- embassy-stm32/src/pac/stm32h7a3qi.rs | 22 +- embassy-stm32/src/pac/stm32h7a3rg.rs | 22 +- embassy-stm32/src/pac/stm32h7a3ri.rs | 22 +- embassy-stm32/src/pac/stm32h7a3vg.rs | 22 +- embassy-stm32/src/pac/stm32h7a3vi.rs | 22 +- embassy-stm32/src/pac/stm32h7a3zg.rs | 22 +- embassy-stm32/src/pac/stm32h7a3zi.rs | 22 +- embassy-stm32/src/pac/stm32h7b0ab.rs | 22 +- embassy-stm32/src/pac/stm32h7b0ib.rs | 22 +- embassy-stm32/src/pac/stm32h7b0rb.rs | 22 +- embassy-stm32/src/pac/stm32h7b0vb.rs | 22 +- embassy-stm32/src/pac/stm32h7b0zb.rs | 22 +- embassy-stm32/src/pac/stm32h7b3ai.rs | 22 +- embassy-stm32/src/pac/stm32h7b3ii.rs | 22 +- embassy-stm32/src/pac/stm32h7b3li.rs | 22 +- embassy-stm32/src/pac/stm32h7b3ni.rs | 22 +- embassy-stm32/src/pac/stm32h7b3qi.rs | 22 +- embassy-stm32/src/pac/stm32h7b3ri.rs | 22 +- embassy-stm32/src/pac/stm32h7b3vi.rs | 22 +- embassy-stm32/src/pac/stm32h7b3zi.rs | 22 +- embassy-stm32/src/pac/stm32l010c6.rs | 8 +- embassy-stm32/src/pac/stm32l010f4.rs | 6 +- embassy-stm32/src/pac/stm32l010k4.rs | 6 +- embassy-stm32/src/pac/stm32l010k8.rs | 7 +- embassy-stm32/src/pac/stm32l010r8.rs | 7 +- embassy-stm32/src/pac/stm32l010rb.rs | 8 +- embassy-stm32/src/pac/stm32l011d3.rs | 6 +- embassy-stm32/src/pac/stm32l011d4.rs | 6 +- embassy-stm32/src/pac/stm32l011e3.rs | 6 +- embassy-stm32/src/pac/stm32l011e4.rs | 6 +- embassy-stm32/src/pac/stm32l011f3.rs | 6 +- embassy-stm32/src/pac/stm32l011f4.rs | 6 +- embassy-stm32/src/pac/stm32l011g3.rs | 6 +- embassy-stm32/src/pac/stm32l011g4.rs | 6 +- embassy-stm32/src/pac/stm32l011k3.rs | 6 +- embassy-stm32/src/pac/stm32l011k4.rs | 6 +- embassy-stm32/src/pac/stm32l021d4.rs | 6 +- embassy-stm32/src/pac/stm32l021f4.rs | 6 +- embassy-stm32/src/pac/stm32l021g4.rs | 6 +- embassy-stm32/src/pac/stm32l021k4.rs | 6 +- embassy-stm32/src/pac/stm32l031c4.rs | 9 +- embassy-stm32/src/pac/stm32l031c6.rs | 9 +- embassy-stm32/src/pac/stm32l031e4.rs | 9 +- embassy-stm32/src/pac/stm32l031e6.rs | 9 +- embassy-stm32/src/pac/stm32l031f4.rs | 9 +- embassy-stm32/src/pac/stm32l031f6.rs | 9 +- embassy-stm32/src/pac/stm32l031g4.rs | 9 +- embassy-stm32/src/pac/stm32l031g6.rs | 9 +- embassy-stm32/src/pac/stm32l031k4.rs | 9 +- embassy-stm32/src/pac/stm32l031k6.rs | 9 +- embassy-stm32/src/pac/stm32l041c4.rs | 9 +- embassy-stm32/src/pac/stm32l041c6.rs | 9 +- embassy-stm32/src/pac/stm32l041e6.rs | 9 +- embassy-stm32/src/pac/stm32l041f6.rs | 9 +- embassy-stm32/src/pac/stm32l041g6.rs | 9 +- embassy-stm32/src/pac/stm32l041k6.rs | 9 +- embassy-stm32/src/pac/stm32l051c6.rs | 9 +- embassy-stm32/src/pac/stm32l051c8.rs | 9 +- embassy-stm32/src/pac/stm32l051k6.rs | 9 +- embassy-stm32/src/pac/stm32l051k8.rs | 9 +- embassy-stm32/src/pac/stm32l051r6.rs | 9 +- embassy-stm32/src/pac/stm32l051r8.rs | 9 +- embassy-stm32/src/pac/stm32l051t6.rs | 9 +- embassy-stm32/src/pac/stm32l051t8.rs | 9 +- embassy-stm32/src/pac/stm32l052c6.rs | 10 +- embassy-stm32/src/pac/stm32l052c8.rs | 10 +- embassy-stm32/src/pac/stm32l052k6.rs | 10 +- embassy-stm32/src/pac/stm32l052k8.rs | 10 +- embassy-stm32/src/pac/stm32l052r6.rs | 10 +- embassy-stm32/src/pac/stm32l052r8.rs | 10 +- embassy-stm32/src/pac/stm32l052t6.rs | 10 +- embassy-stm32/src/pac/stm32l052t8.rs | 10 +- embassy-stm32/src/pac/stm32l053c6.rs | 10 +- embassy-stm32/src/pac/stm32l053c8.rs | 10 +- embassy-stm32/src/pac/stm32l053r6.rs | 10 +- embassy-stm32/src/pac/stm32l053r8.rs | 10 +- embassy-stm32/src/pac/stm32l062c8.rs | 10 +- embassy-stm32/src/pac/stm32l062k8.rs | 10 +- embassy-stm32/src/pac/stm32l063c8.rs | 10 +- embassy-stm32/src/pac/stm32l063r8.rs | 10 +- embassy-stm32/src/pac/stm32l071c8.rs | 13 +- embassy-stm32/src/pac/stm32l071cb.rs | 13 +- embassy-stm32/src/pac/stm32l071cz.rs | 13 +- embassy-stm32/src/pac/stm32l071k8.rs | 12 +- embassy-stm32/src/pac/stm32l071kb.rs | 13 +- embassy-stm32/src/pac/stm32l071kz.rs | 13 +- embassy-stm32/src/pac/stm32l071rb.rs | 13 +- embassy-stm32/src/pac/stm32l071rz.rs | 13 +- embassy-stm32/src/pac/stm32l071v8.rs | 13 +- embassy-stm32/src/pac/stm32l071vb.rs | 13 +- embassy-stm32/src/pac/stm32l071vz.rs | 13 +- embassy-stm32/src/pac/stm32l072cb.rs | 13 +- embassy-stm32/src/pac/stm32l072cz.rs | 13 +- embassy-stm32/src/pac/stm32l072kb.rs | 13 +- embassy-stm32/src/pac/stm32l072kz.rs | 13 +- embassy-stm32/src/pac/stm32l072rb.rs | 13 +- embassy-stm32/src/pac/stm32l072rz.rs | 13 +- embassy-stm32/src/pac/stm32l072v8.rs | 13 +- embassy-stm32/src/pac/stm32l072vb.rs | 13 +- embassy-stm32/src/pac/stm32l072vz.rs | 13 +- embassy-stm32/src/pac/stm32l073cb.rs | 13 +- embassy-stm32/src/pac/stm32l073cz.rs | 13 +- embassy-stm32/src/pac/stm32l073rb.rs | 13 +- embassy-stm32/src/pac/stm32l073rz.rs | 13 +- embassy-stm32/src/pac/stm32l073v8.rs | 13 +- embassy-stm32/src/pac/stm32l073vb.rs | 13 +- embassy-stm32/src/pac/stm32l073vz.rs | 13 +- embassy-stm32/src/pac/stm32l081cb.rs | 13 +- embassy-stm32/src/pac/stm32l081cz.rs | 13 +- embassy-stm32/src/pac/stm32l081kz.rs | 13 +- embassy-stm32/src/pac/stm32l082cz.rs | 13 +- embassy-stm32/src/pac/stm32l082kb.rs | 13 +- embassy-stm32/src/pac/stm32l082kz.rs | 13 +- embassy-stm32/src/pac/stm32l083cb.rs | 13 +- embassy-stm32/src/pac/stm32l083cz.rs | 13 +- embassy-stm32/src/pac/stm32l083rb.rs | 13 +- embassy-stm32/src/pac/stm32l083rz.rs | 13 +- embassy-stm32/src/pac/stm32l083v8.rs | 13 +- embassy-stm32/src/pac/stm32l083vb.rs | 13 +- embassy-stm32/src/pac/stm32l083vz.rs | 13 +- embassy-stm32/src/pac/stm32l412c8.rs | 10 +- embassy-stm32/src/pac/stm32l412cb.rs | 10 +- embassy-stm32/src/pac/stm32l412k8.rs | 10 +- embassy-stm32/src/pac/stm32l412kb.rs | 10 +- embassy-stm32/src/pac/stm32l412r8.rs | 10 +- embassy-stm32/src/pac/stm32l412rb.rs | 10 +- embassy-stm32/src/pac/stm32l412t8.rs | 10 +- embassy-stm32/src/pac/stm32l412tb.rs | 10 +- embassy-stm32/src/pac/stm32l422cb.rs | 10 +- embassy-stm32/src/pac/stm32l422kb.rs | 10 +- embassy-stm32/src/pac/stm32l422rb.rs | 10 +- embassy-stm32/src/pac/stm32l422tb.rs | 10 +- embassy-stm32/src/pac/stm32l431cb.rs | 11 +- embassy-stm32/src/pac/stm32l431cc.rs | 11 +- embassy-stm32/src/pac/stm32l431kb.rs | 11 +- embassy-stm32/src/pac/stm32l431kc.rs | 11 +- embassy-stm32/src/pac/stm32l431rb.rs | 11 +- embassy-stm32/src/pac/stm32l431rc.rs | 11 +- embassy-stm32/src/pac/stm32l431vc.rs | 11 +- embassy-stm32/src/pac/stm32l432kb.rs | 12 +- embassy-stm32/src/pac/stm32l432kc.rs | 12 +- embassy-stm32/src/pac/stm32l433cb.rs | 11 +- embassy-stm32/src/pac/stm32l433cc.rs | 11 +- embassy-stm32/src/pac/stm32l433rb.rs | 11 +- embassy-stm32/src/pac/stm32l433rc.rs | 11 +- embassy-stm32/src/pac/stm32l433vc.rs | 11 +- embassy-stm32/src/pac/stm32l442kc.rs | 12 +- embassy-stm32/src/pac/stm32l443cc.rs | 11 +- embassy-stm32/src/pac/stm32l443rc.rs | 11 +- embassy-stm32/src/pac/stm32l443vc.rs | 11 +- embassy-stm32/src/pac/stm32l451cc.rs | 12 +- embassy-stm32/src/pac/stm32l451ce.rs | 12 +- embassy-stm32/src/pac/stm32l451rc.rs | 12 +- embassy-stm32/src/pac/stm32l451re.rs | 12 +- embassy-stm32/src/pac/stm32l451vc.rs | 12 +- embassy-stm32/src/pac/stm32l451ve.rs | 12 +- embassy-stm32/src/pac/stm32l452cc.rs | 12 +- embassy-stm32/src/pac/stm32l452ce.rs | 12 +- embassy-stm32/src/pac/stm32l452rc.rs | 12 +- embassy-stm32/src/pac/stm32l452re.rs | 12 +- embassy-stm32/src/pac/stm32l452vc.rs | 12 +- embassy-stm32/src/pac/stm32l452ve.rs | 12 +- embassy-stm32/src/pac/stm32l462ce.rs | 12 +- embassy-stm32/src/pac/stm32l462re.rs | 12 +- embassy-stm32/src/pac/stm32l462ve.rs | 12 +- embassy-stm32/src/pac/stm32l471qe.rs | 19 +- embassy-stm32/src/pac/stm32l471qg.rs | 19 +- embassy-stm32/src/pac/stm32l471re.rs | 19 +- embassy-stm32/src/pac/stm32l471rg.rs | 19 +- embassy-stm32/src/pac/stm32l471ve.rs | 19 +- embassy-stm32/src/pac/stm32l471vg.rs | 19 +- embassy-stm32/src/pac/stm32l471ze.rs | 19 +- embassy-stm32/src/pac/stm32l471zg.rs | 19 +- embassy-stm32/src/pac/stm32l475rc.rs | 19 +- embassy-stm32/src/pac/stm32l475re.rs | 19 +- embassy-stm32/src/pac/stm32l475rg.rs | 19 +- embassy-stm32/src/pac/stm32l475vc.rs | 19 +- embassy-stm32/src/pac/stm32l475ve.rs | 19 +- embassy-stm32/src/pac/stm32l475vg.rs | 19 +- embassy-stm32/src/pac/stm32l476je.rs | 19 +- embassy-stm32/src/pac/stm32l476jg.rs | 19 +- embassy-stm32/src/pac/stm32l476me.rs | 19 +- embassy-stm32/src/pac/stm32l476mg.rs | 19 +- embassy-stm32/src/pac/stm32l476qe.rs | 19 +- embassy-stm32/src/pac/stm32l476qg.rs | 19 +- embassy-stm32/src/pac/stm32l476rc.rs | 19 +- embassy-stm32/src/pac/stm32l476re.rs | 19 +- embassy-stm32/src/pac/stm32l476rg.rs | 19 +- embassy-stm32/src/pac/stm32l476vc.rs | 19 +- embassy-stm32/src/pac/stm32l476ve.rs | 19 +- embassy-stm32/src/pac/stm32l476vg.rs | 19 +- embassy-stm32/src/pac/stm32l476ze.rs | 19 +- embassy-stm32/src/pac/stm32l476zg.rs | 19 +- embassy-stm32/src/pac/stm32l485jc.rs | 19 +- embassy-stm32/src/pac/stm32l485je.rs | 19 +- embassy-stm32/src/pac/stm32l486jg.rs | 19 +- embassy-stm32/src/pac/stm32l486qg.rs | 19 +- embassy-stm32/src/pac/stm32l486rg.rs | 19 +- embassy-stm32/src/pac/stm32l486vg.rs | 19 +- embassy-stm32/src/pac/stm32l486zg.rs | 19 +- embassy-stm32/src/pac/stm32l496ae.rs | 19 +- embassy-stm32/src/pac/stm32l496ag.rs | 19 +- embassy-stm32/src/pac/stm32l496qe.rs | 19 +- embassy-stm32/src/pac/stm32l496qg.rs | 19 +- embassy-stm32/src/pac/stm32l496re.rs | 19 +- embassy-stm32/src/pac/stm32l496rg.rs | 19 +- embassy-stm32/src/pac/stm32l496ve.rs | 19 +- embassy-stm32/src/pac/stm32l496vg.rs | 19 +- embassy-stm32/src/pac/stm32l496wg.rs | 19 +- embassy-stm32/src/pac/stm32l496ze.rs | 19 +- embassy-stm32/src/pac/stm32l496zg.rs | 19 +- embassy-stm32/src/pac/stm32l4a6ag.rs | 19 +- embassy-stm32/src/pac/stm32l4a6qg.rs | 19 +- embassy-stm32/src/pac/stm32l4a6rg.rs | 19 +- embassy-stm32/src/pac/stm32l4a6vg.rs | 19 +- embassy-stm32/src/pac/stm32l4a6zg.rs | 19 +- embassy-stm32/src/pac/stm32l4p5ae.rs | 19 +- embassy-stm32/src/pac/stm32l4p5ag.rs | 19 +- embassy-stm32/src/pac/stm32l4p5ce.rs | 19 +- embassy-stm32/src/pac/stm32l4p5cg.rs | 19 +- embassy-stm32/src/pac/stm32l4p5qe.rs | 19 +- embassy-stm32/src/pac/stm32l4p5qg.rs | 19 +- embassy-stm32/src/pac/stm32l4p5re.rs | 19 +- embassy-stm32/src/pac/stm32l4p5rg.rs | 19 +- embassy-stm32/src/pac/stm32l4p5ve.rs | 19 +- embassy-stm32/src/pac/stm32l4p5vg.rs | 19 +- embassy-stm32/src/pac/stm32l4p5ze.rs | 19 +- embassy-stm32/src/pac/stm32l4p5zg.rs | 19 +- embassy-stm32/src/pac/stm32l4q5ag.rs | 19 +- embassy-stm32/src/pac/stm32l4q5cg.rs | 19 +- embassy-stm32/src/pac/stm32l4q5qg.rs | 19 +- embassy-stm32/src/pac/stm32l4q5rg.rs | 19 +- embassy-stm32/src/pac/stm32l4q5vg.rs | 19 +- embassy-stm32/src/pac/stm32l4q5zg.rs | 19 +- embassy-stm32/src/pac/stm32l4r5ag.rs | 19 +- embassy-stm32/src/pac/stm32l4r5ai.rs | 19 +- embassy-stm32/src/pac/stm32l4r5qg.rs | 19 +- embassy-stm32/src/pac/stm32l4r5qi.rs | 19 +- embassy-stm32/src/pac/stm32l4r5vg.rs | 19 +- embassy-stm32/src/pac/stm32l4r5vi.rs | 19 +- embassy-stm32/src/pac/stm32l4r5zg.rs | 19 +- embassy-stm32/src/pac/stm32l4r5zi.rs | 19 +- embassy-stm32/src/pac/stm32l4r7ai.rs | 19 +- embassy-stm32/src/pac/stm32l4r7vi.rs | 19 +- embassy-stm32/src/pac/stm32l4r7zi.rs | 19 +- embassy-stm32/src/pac/stm32l4r9ag.rs | 19 +- embassy-stm32/src/pac/stm32l4r9ai.rs | 19 +- embassy-stm32/src/pac/stm32l4r9vg.rs | 19 +- embassy-stm32/src/pac/stm32l4r9vi.rs | 19 +- embassy-stm32/src/pac/stm32l4r9zg.rs | 19 +- embassy-stm32/src/pac/stm32l4r9zi.rs | 19 +- embassy-stm32/src/pac/stm32l4s5ai.rs | 19 +- embassy-stm32/src/pac/stm32l4s5qi.rs | 19 +- embassy-stm32/src/pac/stm32l4s5vi.rs | 19 +- embassy-stm32/src/pac/stm32l4s5zi.rs | 19 +- embassy-stm32/src/pac/stm32l4s7ai.rs | 19 +- embassy-stm32/src/pac/stm32l4s7vi.rs | 19 +- embassy-stm32/src/pac/stm32l4s7zi.rs | 19 +- embassy-stm32/src/pac/stm32l4s9ai.rs | 19 +- embassy-stm32/src/pac/stm32l4s9vi.rs | 19 +- embassy-stm32/src/pac/stm32l4s9zi.rs | 19 +- embassy-stm32/stm32-data | 2 +- 508 files changed, 26971 insertions(+), 30497 deletions(-) create mode 100644 embassy-stm32/src/i2c/v1.rs diff --git a/embassy-stm32/Cargo.toml b/embassy-stm32/Cargo.toml index 6d234f65f..5331043ee 100644 --- a/embassy-stm32/Cargo.toml +++ b/embassy-stm32/Cargo.toml @@ -40,509 +40,509 @@ sdmmc-rs = ["embedded-sdmmc"] pac = [] # BEGIN GENERATED FEATURES -stm32f401cb = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f401cc = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f401cd = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f401ce = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f401rb = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f401rc = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f401rd = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f401re = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f401vb = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f401vc = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f401vd = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f401ve = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f405oe = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f405og = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f405rg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f405vg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f405zg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f407ie = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f407ig = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f407ve = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f407vg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f407ze = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f407zg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f410c8 = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f410cb = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f410r8 = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f410rb = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f410t8 = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f410tb = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f411cc = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f411ce = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f411rc = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f411re = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f411vc = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f411ve = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f412ce = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f412cg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f412re = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f412rg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f412ve = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f412vg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f412ze = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f412zg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f413cg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f413ch = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f413mg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f413mh = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f413rg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f413rh = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f413vg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f413vh = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f413zg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f413zh = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f415og = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f415rg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f415vg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f415zg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f417ie = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f417ig = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f417ve = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f417vg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f417ze = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f417zg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f423ch = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f423mh = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f423rh = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f423vh = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f423zh = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f427ag = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f427ai = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f427ig = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f427ii = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f427vg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f427vi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f427zg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f427zi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f429ag = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f429ai = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f429be = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f429bg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f429bi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f429ie = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f429ig = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f429ii = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f429ne = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f429ng = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f429ni = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f429ve = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f429vg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f429vi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f429ze = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f429zg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f429zi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f437ai = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f437ig = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f437ii = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f437vg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f437vi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f437zg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f437zi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f439ai = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f439bg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f439bi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f439ig = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f439ii = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f439ng = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f439ni = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f439vg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f439vi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f439zg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f439zi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f446mc = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f446me = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f446rc = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f446re = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f446vc = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f446ve = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f446zc = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f446ze = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f469ae = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f469ag = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f469ai = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f469be = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f469bg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f469bi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f469ie = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f469ig = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f469ii = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f469ne = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f469ng = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f469ni = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f469ve = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f469vg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f469vi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f469ze = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f469zg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f469zi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f479ag = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f479ai = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f479bg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f479bi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f479ig = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f479ii = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f479ng = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f479ni = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f479vg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f479vi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f479zg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32f479zi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_timer", "_timer_v1", "_usart", "_usart_v1",] -stm32h723ve = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h723vg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h723ze = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h723zg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h725ae = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h725ag = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h725ie = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h725ig = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h725re = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h725rg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h725ve = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h725vg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h725ze = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h725zg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h730ab = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h730ib = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h730vb = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h730zb = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h733vg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h733zg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h735ag = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h735ig = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h735rg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h735vg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h735zg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h742ag = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h742ai = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h742bg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h742bi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h742ig = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h742ii = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h742vg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h742vi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h742xg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h742xi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h742zg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h742zi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h743ag = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h743ai = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h743bg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h743bi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h743ig = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h743ii = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h743vg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h743vi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h743xg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h743xi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h743zg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h743zi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h745bg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h745bi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h745ig = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h745ii = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h745xg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h745xi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h745zg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h745zi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h747ag = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h747ai = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h747bg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h747bi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h747ig = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h747ii = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h747xg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h747xi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h747zi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h750ib = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h750vb = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h750xb = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h750zb = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h753ai = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h753bi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h753ii = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h753vi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h753xi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h753zi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h755bi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h755ii = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h755xi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h755zi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h757ai = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h757bi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h757ii = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h757xi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h757zi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h7a3ag = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h7a3ai = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h7a3ig = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h7a3ii = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h7a3lg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h7a3li = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h7a3ng = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h7a3ni = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h7a3qi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h7a3rg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h7a3ri = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h7a3vg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h7a3vi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h7a3zg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h7a3zi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h7b0ab = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h7b0ib = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h7b0rb = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h7b0vb = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h7b0zb = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h7b3ai = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h7b3ii = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h7b3li = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h7b3ni = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h7b3qi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h7b3ri = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h7b3vi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32h7b3zi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7", "_timer", "_timer_v1",] -stm32l010c6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l010f4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l010k4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l010k8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l010r8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l010rb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l011d3 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l011d4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l011e3 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l011e4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l011f3 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l011f4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l011g3 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l011g4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l011k3 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l011k4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l021d4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l021f4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l021g4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l021k4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l031c4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l031c6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l031e4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l031e6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l031f4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l031f6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l031g4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l031g6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l031k4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l031k6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l041c4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l041c6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l041e6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l041f6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l041g6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l041k6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l051c6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l051c8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l051k6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l051k8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l051r6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l051r8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l051t6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l051t8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l052c6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l052c8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l052k6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l052k8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l052r6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l052r8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l052t6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l052t8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l053c6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l053c8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l053r6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l053r8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l062c8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l062k8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l063c8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l063r8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l071c8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l071cb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l071cz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l071k8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l071kb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l071kz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l071rb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l071rz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l071v8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l071vb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l071vz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l072cb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l072cz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l072kb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l072kz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l072rb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l072rz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l072v8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l072vb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l072vz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l073cb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l073cz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l073rb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l073rz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l073v8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l073vb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l073vz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l081cb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l081cz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l081kz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l082cz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l082kb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l082kz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l083cb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l083cz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l083rb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l083rz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l083v8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l083vb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l083vz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l412c8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l412cb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l412k8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l412kb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l412r8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l412rb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l412t8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l412tb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l422cb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l422kb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l422rb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l422tb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l431cb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l431cc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l431kb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l431kc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l431rb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l431rc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l431vc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l432kb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l432kc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l433cb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l433cc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l433rb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l433rc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l433vc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l442kc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l443cc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l443rc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l443vc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l451cc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l451ce = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l451rc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l451re = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l451vc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l451ve = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l452cc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l452ce = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l452rc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l452re = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l452vc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l452ve = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l462ce = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l462re = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l462ve = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l471qe = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l471qg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l471re = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l471rg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l471ve = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l471vg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l471ze = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l471zg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l475rc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l475re = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l475rg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l475vc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l475ve = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l475vg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l476je = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l476jg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l476me = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l476mg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l476qe = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l476qg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l476rc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l476re = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l476rg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l476vc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l476ve = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l476vg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l476ze = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l476zg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l485jc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l485je = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l486jg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l486qg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l486rg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l486vg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l486zg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l496ae = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l496ag = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l496qe = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l496qg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l496re = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l496rg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l496ve = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l496vg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l496wg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l496ze = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l496zg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l4a6ag = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l4a6qg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l4a6rg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l4a6vg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l4a6zg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1", "_usart", "_usart_v2",] -stm32l4p5ae = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4p5ag = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4p5ce = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4p5cg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4p5qe = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4p5qg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4p5re = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4p5rg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4p5ve = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4p5vg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4p5ze = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4p5zg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4q5ag = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4q5cg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4q5qg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4q5rg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4q5vg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4q5zg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4r5ag = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4r5ai = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4r5qg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4r5qi = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4r5vg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4r5vi = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4r5zg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4r5zi = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4r7ai = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4r7vi = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4r7zi = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4r9ag = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4r9ai = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4r9vg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4r9vi = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4r9zg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4r9zi = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4s5ai = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4s5qi = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4s5vi = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4s5zi = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4s7ai = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4s7vi = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4s7zi = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4s9ai = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4s9vi = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] -stm32l4s9zi = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4", "_timer", "_timer_v1",] +stm32f401cb = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f401cc = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f401cd = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f401ce = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f401rb = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f401rc = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f401rd = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f401re = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f401vb = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f401vc = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f401vd = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f401ve = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f405oe = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f405og = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f405rg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f405vg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f405zg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f407ie = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f407ig = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f407ve = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f407vg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f407ze = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f407zg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f410c8 = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f410cb = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f410r8 = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f410rb = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f410t8 = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f410tb = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f411cc = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f411ce = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f411rc = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f411re = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f411vc = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f411ve = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f412ce = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f412cg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f412re = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f412rg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f412ve = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f412vg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f412ze = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f412zg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f413cg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f413ch = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f413mg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f413mh = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f413rg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f413rh = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f413vg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f413vh = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f413zg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f413zh = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f415og = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f415rg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f415vg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f415zg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f417ie = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f417ig = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f417ve = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f417vg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f417ze = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f417zg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f423ch = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f423mh = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f423rh = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f423vh = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f423zh = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f427ag = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f427ai = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f427ig = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f427ii = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f427vg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f427vi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f427zg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f427zi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f429ag = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f429ai = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f429be = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f429bg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f429bi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f429ie = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f429ig = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f429ii = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f429ne = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f429ng = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f429ni = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f429ve = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f429vg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f429vi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f429ze = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f429zg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f429zi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f437ai = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f437ig = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f437ii = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f437vg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f437vi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f437zg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f437zi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f439ai = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f439bg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f439bi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f439ig = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f439ii = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f439ng = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f439ni = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f439vg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f439vi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f439zg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f439zi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f446mc = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f446me = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f446rc = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f446re = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f446vc = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f446ve = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f446zc = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f446ze = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_spi", "_spi_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f469ae = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f469ag = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f469ai = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f469be = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f469bg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f469bi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f469ie = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f469ig = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f469ii = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f469ne = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f469ng = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f469ni = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f469ve = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f469vg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f469vi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f469ze = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f469zg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f469zi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f479ag = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f479ai = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f479bg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f479bi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f479ig = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f479ii = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f479ng = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f479ni = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f479vg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f479vi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f479zg = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32f479zi = [ "_dma", "_dma_v2", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_i2c", "_i2c_v1", "_rng", "_rng_v1", "_stm32f4", "_syscfg", "_syscfg_f4", "_usart", "_usart_v1",] +stm32h723ve = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h723vg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h723ze = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h723zg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h725ae = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h725ag = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h725ie = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h725ig = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h725re = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h725rg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h725ve = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h725vg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h725ze = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h725zg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h730ab = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h730ib = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h730vb = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h730zb = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h733vg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h733zg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h735ag = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h735ig = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h735rg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h735vg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h735zg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h742ag = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h742ai = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h742bg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h742bi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h742ig = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h742ii = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h742vg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h742vi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h742xg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h742xi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h742zg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h742zi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h743ag = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h743ai = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h743bg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h743bi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h743ig = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h743ii = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h743vg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h743vi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h743xg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h743xi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h743zg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h743zi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h745bg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h745bi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h745ig = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h745ii = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h745xg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h745xi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h745zg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h745zi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h747ag = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h747ai = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h747bg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h747bi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h747ig = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h747ii = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h747xg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h747xi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h747zi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h750ib = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h750vb = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h750xb = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h750zb = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h753ai = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h753bi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h753ii = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h753vi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h753xi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h753zi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h755bi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h755ii = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h755xi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h755zi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h757ai = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h757bi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h757ii = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h757xi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h757zi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rcc", "_rcc_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h7a3ag = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h7a3ai = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h7a3ig = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h7a3ii = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h7a3lg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h7a3li = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h7a3ng = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h7a3ni = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h7a3qi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h7a3rg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h7a3ri = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h7a3vg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h7a3vi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h7a3zg = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h7a3zi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h7b0ab = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h7b0ib = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h7b0rb = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h7b0vb = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h7b0zb = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h7b3ai = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h7b3ii = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h7b3li = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h7b3ni = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h7b3qi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h7b3ri = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h7b3vi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32h7b3zi = [ "_dbgmcu", "_dbgmcu_h7", "_dma", "_dma_v2", "_exti", "_exti_v1", "_flash", "_flash_h7", "_gpio", "_gpio_v2", "_i2c", "_i2c_v2", "_pwr", "_pwr_h7", "_rng", "_rng_v1", "_sdmmc", "_sdmmc_v2", "_spi", "_spi_v3", "_stm32h7", "_syscfg", "_syscfg_h7",] +stm32l010c6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l010f4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l010k4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l010k8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l010r8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l010rb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l011d3 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l011d4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l011e3 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l011e4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l011f3 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l011f4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l011g3 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l011g4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l011k3 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l011k4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l021d4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l021f4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l021g4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l021k4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l031c4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l031c6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l031e4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l031e6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l031f4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l031f6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l031g4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l031g6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l031k4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l031k6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l041c4 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l041c6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l041e6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l041f6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l041g6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l041k6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l051c6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l051c8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l051k6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l051k8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l051r6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l051r8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l051t6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l051t8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l052c6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l052c8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l052k6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l052k8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l052r6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l052r8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l052t6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l052t8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l053c6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l053c8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l053r6 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l053r8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l062c8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l062k8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l063c8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l063r8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l071c8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l071cb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l071cz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l071k8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l071kb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l071kz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l071rb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l071rz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l071v8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l071vb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l071vz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l072cb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l072cz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l072kb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l072kz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l072rb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l072rz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l072v8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l072vb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l072vz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l073cb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l073cz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l073rb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l073rz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l073v8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l073vb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l073vz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l081cb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l081cz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l081kz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l082cz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l082kb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l082kz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l083cb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l083cz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l083rb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l083rz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l083v8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l083vb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l083vz = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rcc", "_rcc_l0", "_rng", "_rng_v1", "_stm32l0", "_syscfg", "_syscfg_l0", "_usart", "_usart_v2",] +stm32l412c8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l412cb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l412k8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l412kb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l412r8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l412rb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l412t8 = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l412tb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l422cb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l422kb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l422rb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l422tb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l431cb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l431cc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l431kb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l431kc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l431rb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l431rc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l431vc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l432kb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l432kc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l433cb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l433cc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l433rb = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l433rc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l433vc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l442kc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l443cc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l443rc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l443vc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l451cc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l451ce = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l451rc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l451re = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l451vc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l451ve = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l452cc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l452ce = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l452rc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l452re = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l452vc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l452ve = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l462ce = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l462re = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l462ve = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l471qe = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l471qg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l471re = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l471rg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l471ve = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l471vg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l471ze = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l471zg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l475rc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l475re = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l475rg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l475vc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l475ve = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l475vg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l476je = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l476jg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l476me = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l476mg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l476qe = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l476qg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l476rc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l476re = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l476rg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l476vc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l476ve = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l476vg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l476ze = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l476zg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l485jc = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l485je = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l486jg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l486qg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l486rg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l486vg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l486zg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l496ae = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l496ag = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l496qe = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l496qg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l496re = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l496rg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l496ve = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l496vg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l496wg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l496ze = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l496zg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l4a6ag = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l4a6qg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l4a6rg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l4a6vg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l4a6zg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4", "_syscfg", "_syscfg_l4", "_usart", "_usart_v2",] +stm32l4p5ae = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4p5ag = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4p5ce = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4p5cg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4p5qe = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4p5qg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4p5re = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4p5rg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4p5ve = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4p5vg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4p5ze = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4p5zg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4q5ag = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4q5cg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4q5qg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4q5rg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4q5vg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4q5zg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4r5ag = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4r5ai = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4r5qg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4r5qi = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4r5vg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4r5vi = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4r5zg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4r5zi = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4r7ai = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4r7vi = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4r7zi = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4r9ag = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4r9ai = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4r9vg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4r9vi = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4r9zg = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4r9zi = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4s5ai = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4s5qi = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4s5vi = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4s5zi = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4s7ai = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4s7vi = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4s7zi = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4s9ai = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4s9vi = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] +stm32l4s9zi = [ "_dma", "_dma_v1", "_exti", "_exti_v1", "_gpio", "_gpio_v2", "_rng", "_rng_v1", "_spi", "_spi_v2", "_stm32l4p", "_syscfg", "_syscfg_l4",] _dbgmcu = [] _dbgmcu_h7 = [] _dma = [] @@ -555,6 +555,7 @@ _flash_h7 = [] _gpio = [] _gpio_v2 = [] _i2c = [] +_i2c_v1 = [] _i2c_v2 = [] _pwr = [] _pwr_h7 = [] @@ -579,8 +580,6 @@ _syscfg_f4 = [] _syscfg_h7 = [] _syscfg_l0 = [] _syscfg_l4 = [] -_timer = [] -_timer_v1 = [] _usart = [] _usart_v1 = [] _usart_v2 = [] diff --git a/embassy-stm32/src/i2c/mod.rs b/embassy-stm32/src/i2c/mod.rs index ed0eaf387..9650aa5fc 100644 --- a/embassy-stm32/src/i2c/mod.rs +++ b/embassy-stm32/src/i2c/mod.rs @@ -1,5 +1,6 @@ #![macro_use] +#[cfg_attr(feature = "_i2c_v1", path = "v1.rs")] #[cfg_attr(feature = "_i2c_v2", path = "v2.rs")] mod _version; pub use _version::*; @@ -8,6 +9,9 @@ pub enum Error { Bus, Arbitration, Nack, + Timeout, + Crc, + Overrun, } pub(crate) mod sealed { diff --git a/embassy-stm32/src/i2c/v1.rs b/embassy-stm32/src/i2c/v1.rs new file mode 100644 index 000000000..23180e406 --- /dev/null +++ b/embassy-stm32/src/i2c/v1.rs @@ -0,0 +1,405 @@ +use crate::gpio::AnyPin; +use crate::gpio::Pin; +use crate::i2c::{Error, Instance, SclPin, SdaPin}; +use crate::time::Hertz; +use core::marker::PhantomData; +use embassy::util::Unborrow; +use embassy_extras::unborrow; +use embedded_hal::blocking::i2c::Read; +use embedded_hal::blocking::i2c::Write; +use embedded_hal::blocking::i2c::WriteRead; + +use crate::pac::i2c; +use crate::pac::i2c::I2c as I2cTrait; +use core::cmp; + +use crate::pac::gpio::vals::{Afr, Moder, Ot}; +use crate::pac::gpio::Gpio; +use crate::pac::regs::gpio_v1::vals::Cnf; +use core::ops::Deref; + +pub struct I2c<'d, T: Instance> { + //peri: T, + scl: AnyPin, + sda: AnyPin, + phantom: PhantomData<&'d mut T>, +} + +impl<'d, T: Instance> I2c<'d, T> { + pub fn new( + pclk: Hertz, + peri: impl Unborrow + 'd, + scl: impl Unborrow>, + sda: impl Unborrow>, + freq: F, + ) -> Self + where + F: Into, + { + unborrow!(peri); + unborrow!(scl, sda); + + unsafe { + Self::configure_pin(scl.block(), scl.pin() as _, scl.af_num()); + Self::configure_pin(sda.block(), sda.pin() as _, sda.af_num()); + } + + unsafe { + T::regs().cr1().modify(|reg| { + reg.set_pe(false); + //reg.set_anfoff(false); + }); + } + + let timings = Timings::new(pclk, freq.into()); + + unsafe { + T::regs().cr2().modify(|reg| { + reg.set_freq(timings.freq); + }); + T::regs().ccr().modify(|reg| { + reg.set_f_s(timings.mode.f_s()); + reg.set_duty(timings.duty.duty()); + reg.set_ccr(timings.ccr); + }); + T::regs().trise().modify(|reg| { + reg.set_trise(timings.trise); + }); + } + + let scl = scl.degrade(); + let sda = sda.degrade(); + + unsafe { + T::regs().cr1().modify(|reg| { + reg.set_pe(true); + }); + } + + Self { + scl, + sda, + phantom: PhantomData, + } + } + + unsafe fn configure_pin(block: Gpio, pin: usize, af_num: u8) { + let (afr, n_af) = if pin < 8 { (0, pin) } else { (1, pin - 8) }; + block.moder().modify(|w| w.set_moder(pin, Moder::ALTERNATE)); + block.afr(afr).modify(|w| w.set_afr(n_af, Afr(af_num))); + block.otyper().modify(|w| w.set_ot(pin, Ot::OPENDRAIN)); + } + + unsafe fn check_and_clear_error_flags(&self) -> Result { + // Note that flags should only be cleared once they have been registered. If flags are + // cleared otherwise, there may be an inherent race condition and flags may be missed. + let sr1 = T::regs().sr1().read(); + + if sr1.timeout() { + T::regs().sr1().modify(|reg| reg.set_timeout(false)); + return Err(Error::Timeout); + } + + if sr1.pecerr() { + T::regs().sr1().modify(|reg| reg.set_pecerr(false)); + return Err(Error::Crc); + } + + if sr1.ovr() { + T::regs().sr1().modify(|reg| reg.set_ovr(false)); + return Err(Error::Overrun); + } + + if sr1.af() { + T::regs().sr1().modify(|reg| reg.set_af(false)); + return Err(Error::Nack); + } + + if sr1.arlo() { + T::regs().sr1().modify(|reg| reg.set_arlo(false)); + return Err(Error::Arbitration); + } + + // The errata indicates that BERR may be incorrectly detected. It recommends ignoring and + // clearing the BERR bit instead. + if sr1.berr() { + T::regs().sr1().modify(|reg| reg.set_berr(false)); + } + + Ok(sr1) + } + + unsafe fn write_bytes(&mut self, addr: u8, bytes: &[u8]) -> Result<(), Error> { + // Send a START condition + + T::regs().cr1().modify(|reg| { + reg.set_start(i2c::vals::Start::START); + }); + + // Wait until START condition was generated + while self.check_and_clear_error_flags()?.sb() == i2c::vals::Sb::NOSTART {} + + // Also wait until signalled we're master and everything is waiting for us + while { + self.check_and_clear_error_flags()?; + + let sr2 = T::regs().sr2().read(); + !sr2.msl() && !sr2.busy() + } {} + + // Set up current address, we're trying to talk to + T::regs().dr().write(|reg| reg.set_dr(addr << 1)); + + // Wait until address was sent + while { + // Check for any I2C errors. If a NACK occurs, the ADDR bit will never be set. + let sr1 = self.check_and_clear_error_flags()?; + + // Wait for the address to be acknowledged + !sr1.addr() + } {} + + // Clear condition by reading SR2 + let _ = T::regs().sr2().read(); + + // Send bytes + for c in bytes { + self.send_byte(*c)?; + } + + // Fallthrough is success + Ok(()) + } + + unsafe fn send_byte(&self, byte: u8) -> Result<(), Error> { + // Wait until we're ready for sending + while { + // Check for any I2C errors. If a NACK occurs, the ADDR bit will never be set. + !self.check_and_clear_error_flags()?.tx_e() + } {} + + // Push out a byte of data + T::regs().dr().write(|reg| reg.set_dr(byte)); + + // Wait until byte is transferred + while { + // Check for any potential error conditions. + !self.check_and_clear_error_flags()?.btf() + } {} + + Ok(()) + } + + unsafe fn recv_byte(&self) -> Result { + while { + // Check for any potential error conditions. + self.check_and_clear_error_flags()?; + + !T::regs().sr1().read().rx_ne() + } {} + + let value = T::regs().dr().read().dr(); + Ok(value) + } +} + +impl<'d, T: Instance> Read for I2c<'d, T> { + type Error = Error; + + fn read(&mut self, addr: u8, buffer: &mut [u8]) -> Result<(), Self::Error> { + if let Some((last, buffer)) = buffer.split_last_mut() { + // Send a START condition and set ACK bit + unsafe { + T::regs().cr1().modify(|reg| { + reg.set_start(i2c::vals::Start::START); + reg.set_ack(true); + }); + } + + // Wait until START condition was generated + while unsafe { T::regs().sr1().read().sb() } == i2c::vals::Sb::NOSTART {} + + // Also wait until signalled we're master and everything is waiting for us + while { + let sr2 = unsafe { T::regs().sr2().read() }; + !sr2.msl() && !sr2.busy() + } {} + + // Set up current address, we're trying to talk to + unsafe { + T::regs().dr().write(|reg| reg.set_dr((addr << 1) + 1)); + } + + // Wait until address was sent + while { + unsafe { + let sr1 = self.check_and_clear_error_flags()?; + + // Wait for the address to be acknowledged + !sr1.addr() + } + } {} + + // Clear condition by reading SR2 + unsafe { + let _ = T::regs().sr2().read(); + } + + // Receive bytes into buffer + for c in buffer { + *c = unsafe { self.recv_byte()? }; + } + + // Prepare to send NACK then STOP after next byte + unsafe { + T::regs().cr1().modify(|reg| { + reg.set_ack(false); + reg.set_stop(i2c::vals::Stop::STOP); + }); + } + + // Receive last byte + *last = unsafe { self.recv_byte()? }; + + // Wait for the STOP to be sent. + while { unsafe { T::regs().cr1().read().stop() == i2c::vals::Stop::STOP } } {} + + // Fallthrough is success + Ok(()) + } else { + Err(Error::Overrun) + } + } +} + +impl<'d, T: Instance> Write for I2c<'d, T> { + type Error = Error; + + fn write(&mut self, addr: u8, bytes: &[u8]) -> Result<(), Self::Error> { + unsafe { + self.write_bytes(addr, bytes)?; + // Send a STOP condition + T::regs() + .cr1() + .modify(|reg| reg.set_stop(i2c::vals::Stop::STOP)); + // Wait for STOP condition to transmit. + while { unsafe { T::regs().cr1().read().stop() == i2c::vals::Stop::STOP } } {} + }; + + // Fallthrough is success + Ok(()) + } +} + +impl<'d, T: Instance> WriteRead for I2c<'d, T> { + type Error = Error; + + fn write_read(&mut self, addr: u8, bytes: &[u8], buffer: &mut [u8]) -> Result<(), Self::Error> { + unsafe { self.write_bytes(addr, bytes)? }; + self.read(addr, buffer)?; + + Ok(()) + } +} + +enum Mode { + Fast, + Standard, +} + +impl Mode { + fn f_s(&self) -> i2c::vals::FS { + match self { + Mode::Fast => i2c::vals::FS::FAST, + Mode::Standard => i2c::vals::FS::STANDARD, + } + } +} + +enum Duty { + Duty2_1, + Duty16_9, +} + +impl Duty { + fn duty(&self) -> i2c::vals::Duty { + match self { + Duty::Duty2_1 => i2c::vals::Duty::DUTY2_1, + Duty::Duty16_9 => i2c::vals::Duty::DUTY16_9, + } + } +} + +struct Timings { + freq: u8, + mode: Mode, + trise: u8, + ccr: u16, + duty: Duty, +} + +impl Timings { + fn new(i2cclk: Hertz, speed: Hertz) -> Self { + // Calculate settings for I2C speed modes + let speed = speed.0; + let clock = i2cclk.0; + let freq = clock / 1_000_000; + assert!(freq >= 2 && freq <= 50); + + // Configure bus frequency into I2C peripheral + //self.i2c.cr2.write(|w| unsafe { w.freq().bits(freq as u8) }); + + let trise = if speed <= 100_000 { + freq + 1 + } else { + (freq * 300) / 1000 + 1 + }; + + let mut ccr; + let duty; + let mode; + + // I2C clock control calculation + if speed <= 100_000 { + duty = Duty::Duty2_1; + mode = Mode::Standard; + ccr = { + let ccr = clock / (speed * 2); + if ccr < 4 { + 4 + } else { + ccr + } + }; + } else { + const DUTYCYCLE: u8 = 0; + mode = Mode::Fast; + if DUTYCYCLE == 0 { + duty = Duty::Duty2_1; + ccr = clock / (speed * 3); + ccr = if ccr < 1 { 1 } else { ccr }; + + // Set clock to fast mode with appropriate parameters for selected speed (2:1 duty cycle) + } else { + duty = Duty::Duty16_9; + ccr = clock / (speed * 25); + ccr = if ccr < 1 { 1 } else { ccr }; + + // Set clock to fast mode with appropriate parameters for selected speed (16:9 duty cycle) + } + } + + Self { + freq: freq as u8, + trise: trise as u8, + ccr: ccr as u16, + duty, + mode, + //prescale: presc_reg, + //scll, + //sclh, + //sdadel, + //scldel, + } + } +} diff --git a/embassy-stm32/src/pac/regs.rs b/embassy-stm32/src/pac/regs.rs index 032728973..3a3f58879 100644 --- a/embassy-stm32/src/pac/regs.rs +++ b/embassy-stm32/src/pac/regs.rs @@ -1,5642 +1,5427 @@ #![no_std] #![doc = "Peripheral access API (generated using svd2rust v0.17.0 (22741fa 2021-04-20))"] -pub mod syscfg_h7 { +pub mod usart_v1 { use crate::generic::*; - #[doc = "System configuration controller"] + #[doc = "Universal synchronous asynchronous receiver transmitter"] #[derive(Copy, Clone)] - pub struct Syscfg(pub *mut u8); - unsafe impl Send for Syscfg {} - unsafe impl Sync for Syscfg {} - impl Syscfg { - #[doc = "peripheral mode configuration register"] - pub fn pmcr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(4usize)) } + pub struct Usart(pub *mut u8); + unsafe impl Send for Usart {} + unsafe impl Sync for Usart {} + impl Usart { + #[doc = "Status register"] + pub fn sr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(0usize)) } } - #[doc = "external interrupt configuration register 1"] - pub fn exticr(self, n: usize) -> Reg { - assert!(n < 4usize); - unsafe { Reg::from_ptr(self.0.add(8usize + n * 4usize)) } + #[doc = "Data register"] + pub fn dr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(4usize)) } } - #[doc = "compensation cell control/status register"] - pub fn cccsr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(32usize)) } + #[doc = "Baud rate register"] + pub fn brr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(8usize)) } } - #[doc = "SYSCFG compensation cell value register"] - pub fn ccvr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(36usize)) } + #[doc = "Control register 1"] + pub fn cr1(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(12usize)) } } - #[doc = "SYSCFG compensation cell code register"] - pub fn cccr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(40usize)) } + #[doc = "Control register 2"] + pub fn cr2(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(16usize)) } } - #[doc = "SYSCFG power control register"] - pub fn pwrcr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(44usize)) } + #[doc = "Control register 3"] + pub fn cr3(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(20usize)) } } - #[doc = "SYSCFG package register"] - pub fn pkgr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(292usize)) } + #[doc = "Guard time and prescaler register"] + pub fn gtpr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(24usize)) } } - #[doc = "SYSCFG user register 0"] - pub fn ur0(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(768usize)) } + } + #[doc = "Universal asynchronous receiver transmitter"] + #[derive(Copy, Clone)] + pub struct Uart(pub *mut u8); + unsafe impl Send for Uart {} + unsafe impl Sync for Uart {} + impl Uart { + #[doc = "Status register"] + pub fn sr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(0usize)) } } - #[doc = "SYSCFG user register 2"] - pub fn ur2(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(776usize)) } + #[doc = "Data register"] + pub fn dr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(4usize)) } } - #[doc = "SYSCFG user register 3"] - pub fn ur3(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(780usize)) } + #[doc = "Baud rate register"] + pub fn brr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(8usize)) } } - #[doc = "SYSCFG user register 4"] - pub fn ur4(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(784usize)) } + #[doc = "Control register 1"] + pub fn cr1(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(12usize)) } } - #[doc = "SYSCFG user register 5"] - pub fn ur5(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(788usize)) } + #[doc = "Control register 2"] + pub fn cr2(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(16usize)) } } - #[doc = "SYSCFG user register 6"] - pub fn ur6(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(792usize)) } + #[doc = "Control register 3"] + pub fn cr3(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(20usize)) } } - #[doc = "SYSCFG user register 7"] - pub fn ur7(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(796usize)) } + } + pub mod vals { + use crate::generic::*; + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Sbk(pub u8); + impl Sbk { + #[doc = "No break character is transmitted"] + pub const NOBREAK: Self = Self(0); + #[doc = "Break character transmitted"] + pub const BREAK: Self = Self(0x01); } - #[doc = "SYSCFG user register 8"] - pub fn ur8(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(800usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Cpha(pub u8); + impl Cpha { + #[doc = "The first clock transition is the first data capture edge"] + pub const FIRST: Self = Self(0); + #[doc = "The second clock transition is the first data capture edge"] + pub const SECOND: Self = Self(0x01); } - #[doc = "SYSCFG user register 9"] - pub fn ur9(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(804usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Rwu(pub u8); + impl Rwu { + #[doc = "Receiver in active mode"] + pub const ACTIVE: Self = Self(0); + #[doc = "Receiver in mute mode"] + pub const MUTE: Self = Self(0x01); } - #[doc = "SYSCFG user register 10"] - pub fn ur10(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(808usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Irlp(pub u8); + impl Irlp { + #[doc = "Normal mode"] + pub const NORMAL: Self = Self(0); + #[doc = "Low-power mode"] + pub const LOWPOWER: Self = Self(0x01); } - #[doc = "SYSCFG user register 11"] - pub fn ur11(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(812usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Ps(pub u8); + impl Ps { + #[doc = "Even parity"] + pub const EVEN: Self = Self(0); + #[doc = "Odd parity"] + pub const ODD: Self = Self(0x01); } - #[doc = "SYSCFG user register 12"] - pub fn ur12(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(816usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct M(pub u8); + impl M { + #[doc = "8 data bits"] + pub const M8: Self = Self(0); + #[doc = "9 data bits"] + pub const M9: Self = Self(0x01); } - #[doc = "SYSCFG user register 13"] - pub fn ur13(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(820usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Stop(pub u8); + impl Stop { + #[doc = "1 stop bit"] + pub const STOP1: Self = Self(0); + #[doc = "0.5 stop bits"] + pub const STOP0P5: Self = Self(0x01); + #[doc = "2 stop bits"] + pub const STOP2: Self = Self(0x02); + #[doc = "1.5 stop bits"] + pub const STOP1P5: Self = Self(0x03); } - #[doc = "SYSCFG user register 14"] - pub fn ur14(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(824usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Wake(pub u8); + impl Wake { + #[doc = "USART wakeup on idle line"] + pub const IDLELINE: Self = Self(0); + #[doc = "USART wakeup on address mark"] + pub const ADDRESSMARK: Self = Self(0x01); } - #[doc = "SYSCFG user register 15"] - pub fn ur15(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(828usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Hdsel(pub u8); + impl Hdsel { + #[doc = "Half duplex mode is not selected"] + pub const FULLDUPLEX: Self = Self(0); + #[doc = "Half duplex mode is selected"] + pub const HALFDUPLEX: Self = Self(0x01); } - #[doc = "SYSCFG user register 16"] - pub fn ur16(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(832usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Lbdl(pub u8); + impl Lbdl { + #[doc = "10-bit break detection"] + pub const LBDL10: Self = Self(0); + #[doc = "11-bit break detection"] + pub const LBDL11: Self = Self(0x01); } - #[doc = "SYSCFG user register 17"] - pub fn ur17(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(836usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Cpol(pub u8); + impl Cpol { + #[doc = "Steady low value on CK pin outside transmission window"] + pub const LOW: Self = Self(0); + #[doc = "Steady high value on CK pin outside transmission window"] + pub const HIGH: Self = Self(0x01); } } pub mod regs { use crate::generic::*; - #[doc = "SYSCFG user register 14"] + #[doc = "Control register 1"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ur14(pub u32); - impl Ur14 { - #[doc = "D1 Stop Reset"] - pub const fn d1stprst(&self) -> bool { + pub struct Cr1(pub u32); + impl Cr1 { + #[doc = "Send break"] + pub const fn sbk(&self) -> super::vals::Sbk { let val = (self.0 >> 0usize) & 0x01; - val != 0 + super::vals::Sbk(val as u8) } - #[doc = "D1 Stop Reset"] - pub fn set_d1stprst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + #[doc = "Send break"] + pub fn set_sbk(&mut self, val: super::vals::Sbk) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - } - impl Default for Ur14 { - fn default() -> Ur14 { - Ur14(0) + #[doc = "Receiver wakeup"] + pub const fn rwu(&self) -> super::vals::Rwu { + let val = (self.0 >> 1usize) & 0x01; + super::vals::Rwu(val as u8) } - } - #[doc = "SYSCFG user register 9"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ur9(pub u32); - impl Ur9 { - #[doc = "Write protection for flash bank 2"] - pub const fn wrpn_2(&self) -> u8 { - let val = (self.0 >> 0usize) & 0xff; - val as u8 + #[doc = "Receiver wakeup"] + pub fn set_rwu(&mut self, val: super::vals::Rwu) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - #[doc = "Write protection for flash bank 2"] - pub fn set_wrpn_2(&mut self, val: u8) { - self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize); + #[doc = "Receiver enable"] + pub const fn re(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; + val != 0 } - #[doc = "Protected area start address for bank 2"] - pub const fn pa_beg_2(&self) -> u16 { - let val = (self.0 >> 16usize) & 0x0fff; - val as u16 + #[doc = "Receiver enable"] + pub fn set_re(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); } - #[doc = "Protected area start address for bank 2"] - pub fn set_pa_beg_2(&mut self, val: u16) { - self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize); + #[doc = "Transmitter enable"] + pub const fn te(&self) -> bool { + let val = (self.0 >> 3usize) & 0x01; + val != 0 } - } - impl Default for Ur9 { - fn default() -> Ur9 { - Ur9(0) + #[doc = "Transmitter enable"] + pub fn set_te(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); } - } - #[doc = "SYSCFG package register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Pkgr(pub u32); - impl Pkgr { - #[doc = "Package"] - pub const fn pkg(&self) -> u8 { - let val = (self.0 >> 0usize) & 0x0f; - val as u8 + #[doc = "IDLE interrupt enable"] + pub const fn idleie(&self) -> bool { + let val = (self.0 >> 4usize) & 0x01; + val != 0 } - #[doc = "Package"] - pub fn set_pkg(&mut self, val: u8) { - self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize); + #[doc = "IDLE interrupt enable"] + pub fn set_idleie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); } - } - impl Default for Pkgr { - fn default() -> Pkgr { - Pkgr(0) + #[doc = "RXNE interrupt enable"] + pub const fn rxneie(&self) -> bool { + let val = (self.0 >> 5usize) & 0x01; + val != 0 } - } - #[doc = "SYSCFG user register 13"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ur13(pub u32); - impl Ur13 { - #[doc = "Secured DTCM RAM Size"] - pub const fn sdrs(&self) -> u8 { - let val = (self.0 >> 0usize) & 0x03; - val as u8 + #[doc = "RXNE interrupt enable"] + pub fn set_rxneie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); } - #[doc = "Secured DTCM RAM Size"] - pub fn set_sdrs(&mut self, val: u8) { - self.0 = (self.0 & !(0x03 << 0usize)) | (((val as u32) & 0x03) << 0usize); + #[doc = "Transmission complete interrupt enable"] + pub const fn tcie(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 } - #[doc = "D1 Standby reset"] - pub const fn d1sbrst(&self) -> bool { - let val = (self.0 >> 16usize) & 0x01; + #[doc = "Transmission complete interrupt enable"] + pub fn set_tcie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + } + #[doc = "TXE interrupt enable"] + pub const fn txeie(&self) -> bool { + let val = (self.0 >> 7usize) & 0x01; val != 0 } - #[doc = "D1 Standby reset"] - pub fn set_d1sbrst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + #[doc = "TXE interrupt enable"] + pub fn set_txeie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); } - } - impl Default for Ur13 { - fn default() -> Ur13 { - Ur13(0) + #[doc = "PE interrupt enable"] + pub const fn peie(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 } - } - #[doc = "SYSCFG user register 7"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ur7(pub u32); - impl Ur7 { - #[doc = "Secured area start address for bank 1"] - pub const fn sa_beg_1(&self) -> u16 { - let val = (self.0 >> 0usize) & 0x0fff; - val as u16 + #[doc = "PE interrupt enable"] + pub fn set_peie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); } - #[doc = "Secured area start address for bank 1"] - pub fn set_sa_beg_1(&mut self, val: u16) { - self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize); + #[doc = "Parity selection"] + pub const fn ps(&self) -> super::vals::Ps { + let val = (self.0 >> 9usize) & 0x01; + super::vals::Ps(val as u8) } - #[doc = "Secured area end address for bank 1"] - pub const fn sa_end_1(&self) -> u16 { - let val = (self.0 >> 16usize) & 0x0fff; - val as u16 + #[doc = "Parity selection"] + pub fn set_ps(&mut self, val: super::vals::Ps) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); } - #[doc = "Secured area end address for bank 1"] - pub fn set_sa_end_1(&mut self, val: u16) { - self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize); + #[doc = "Parity control enable"] + pub const fn pce(&self) -> bool { + let val = (self.0 >> 10usize) & 0x01; + val != 0 } - } - impl Default for Ur7 { - fn default() -> Ur7 { - Ur7(0) + #[doc = "Parity control enable"] + pub fn set_pce(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); } - } - #[doc = "SYSCFG user register 11"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ur11(pub u32); - impl Ur11 { - #[doc = "Secured area end address for bank 2"] - pub const fn sa_end_2(&self) -> u16 { - let val = (self.0 >> 0usize) & 0x0fff; - val as u16 + #[doc = "Wakeup method"] + pub const fn wake(&self) -> super::vals::Wake { + let val = (self.0 >> 11usize) & 0x01; + super::vals::Wake(val as u8) } - #[doc = "Secured area end address for bank 2"] - pub fn set_sa_end_2(&mut self, val: u16) { - self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize); + #[doc = "Wakeup method"] + pub fn set_wake(&mut self, val: super::vals::Wake) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); } - #[doc = "Independent Watchdog 1 mode"] - pub const fn iwdg1m(&self) -> bool { - let val = (self.0 >> 16usize) & 0x01; + #[doc = "Word length"] + pub const fn m(&self) -> super::vals::M { + let val = (self.0 >> 12usize) & 0x01; + super::vals::M(val as u8) + } + #[doc = "Word length"] + pub fn set_m(&mut self, val: super::vals::M) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); + } + #[doc = "USART enable"] + pub const fn ue(&self) -> bool { + let val = (self.0 >> 13usize) & 0x01; val != 0 } - #[doc = "Independent Watchdog 1 mode"] - pub fn set_iwdg1m(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + #[doc = "USART enable"] + pub fn set_ue(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); } } - impl Default for Ur11 { - fn default() -> Ur11 { - Ur11(0) + impl Default for Cr1 { + fn default() -> Cr1 { + Cr1(0) } } - #[doc = "SYSCFG compensation cell value register"] + #[doc = "Guard time and prescaler register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ccvr(pub u32); - impl Ccvr { - #[doc = "NMOS compensation value"] - pub const fn ncv(&self) -> u8 { - let val = (self.0 >> 0usize) & 0x0f; + pub struct Gtpr(pub u32); + impl Gtpr { + #[doc = "Prescaler value"] + pub const fn psc(&self) -> u8 { + let val = (self.0 >> 0usize) & 0xff; val as u8 } - #[doc = "NMOS compensation value"] - pub fn set_ncv(&mut self, val: u8) { - self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize); + #[doc = "Prescaler value"] + pub fn set_psc(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize); } - #[doc = "PMOS compensation value"] - pub const fn pcv(&self) -> u8 { - let val = (self.0 >> 4usize) & 0x0f; + #[doc = "Guard time value"] + pub const fn gt(&self) -> u8 { + let val = (self.0 >> 8usize) & 0xff; val as u8 } - #[doc = "PMOS compensation value"] - pub fn set_pcv(&mut self, val: u8) { - self.0 = (self.0 & !(0x0f << 4usize)) | (((val as u32) & 0x0f) << 4usize); + #[doc = "Guard time value"] + pub fn set_gt(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 8usize)) | (((val as u32) & 0xff) << 8usize); } } - impl Default for Ccvr { - fn default() -> Ccvr { - Ccvr(0) + impl Default for Gtpr { + fn default() -> Gtpr { + Gtpr(0) } } - #[doc = "SYSCFG user register 0"] + #[doc = "Status register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ur0(pub u32); - impl Ur0 { - #[doc = "Bank Swap"] - pub const fn bks(&self) -> bool { + pub struct Sr(pub u32); + impl Sr { + #[doc = "Parity error"] + pub const fn pe(&self) -> bool { let val = (self.0 >> 0usize) & 0x01; val != 0 } - #[doc = "Bank Swap"] - pub fn set_bks(&mut self, val: bool) { + #[doc = "Parity error"] + pub fn set_pe(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "Readout protection"] - pub const fn rdp(&self) -> u8 { - let val = (self.0 >> 16usize) & 0xff; - val as u8 + #[doc = "Framing error"] + pub const fn fe(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; + val != 0 } - #[doc = "Readout protection"] - pub fn set_rdp(&mut self, val: u8) { - self.0 = (self.0 & !(0xff << 16usize)) | (((val as u32) & 0xff) << 16usize); + #[doc = "Framing error"] + pub fn set_fe(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - } - impl Default for Ur0 { - fn default() -> Ur0 { - Ur0(0) + #[doc = "Noise error flag"] + pub const fn ne(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; + val != 0 } - } - #[doc = "SYSCFG user register 5"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ur5(pub u32); - impl Ur5 { - #[doc = "Mass erase secured area disabled for bank 1"] - pub const fn mesad_1(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; + #[doc = "Noise error flag"] + pub fn set_ne(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); + } + #[doc = "Overrun error"] + pub const fn ore(&self) -> bool { + let val = (self.0 >> 3usize) & 0x01; val != 0 } - #[doc = "Mass erase secured area disabled for bank 1"] - pub fn set_mesad_1(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + #[doc = "Overrun error"] + pub fn set_ore(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); } - #[doc = "Write protection for flash bank 1"] - pub const fn wrpn_1(&self) -> u8 { - let val = (self.0 >> 16usize) & 0xff; - val as u8 + #[doc = "IDLE line detected"] + pub const fn idle(&self) -> bool { + let val = (self.0 >> 4usize) & 0x01; + val != 0 } - #[doc = "Write protection for flash bank 1"] - pub fn set_wrpn_1(&mut self, val: u8) { - self.0 = (self.0 & !(0xff << 16usize)) | (((val as u32) & 0xff) << 16usize); + #[doc = "IDLE line detected"] + pub fn set_idle(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); } - } - impl Default for Ur5 { - fn default() -> Ur5 { - Ur5(0) + #[doc = "Read data register not empty"] + pub const fn rxne(&self) -> bool { + let val = (self.0 >> 5usize) & 0x01; + val != 0 } - } - #[doc = "SYSCFG user register 8"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ur8(pub u32); - impl Ur8 { - #[doc = "Mass erase protected area disabled for bank 2"] - pub const fn mepad_2(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; + #[doc = "Read data register not empty"] + pub fn set_rxne(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); + } + #[doc = "Transmission complete"] + pub const fn tc(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; val != 0 } - #[doc = "Mass erase protected area disabled for bank 2"] - pub fn set_mepad_2(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + #[doc = "Transmission complete"] + pub fn set_tc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - #[doc = "Mass erase secured area disabled for bank 2"] - pub const fn mesad_2(&self) -> bool { - let val = (self.0 >> 16usize) & 0x01; + #[doc = "Transmit data register empty"] + pub const fn txe(&self) -> bool { + let val = (self.0 >> 7usize) & 0x01; val != 0 } - #[doc = "Mass erase secured area disabled for bank 2"] - pub fn set_mesad_2(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + #[doc = "Transmit data register empty"] + pub fn set_txe(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + } + #[doc = "LIN break detection flag"] + pub const fn lbd(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 + } + #[doc = "LIN break detection flag"] + pub fn set_lbd(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); } } - impl Default for Ur8 { - fn default() -> Ur8 { - Ur8(0) + impl Default for Sr { + fn default() -> Sr { + Sr(0) } } - #[doc = "SYSCFG compensation cell code register"] + #[doc = "Control register 2"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cccr(pub u32); - impl Cccr { - #[doc = "NMOS compensation code"] - pub const fn ncc(&self) -> u8 { + pub struct Cr2Usart(pub u32); + impl Cr2Usart { + #[doc = "Address of the USART node"] + pub const fn add(&self) -> u8 { let val = (self.0 >> 0usize) & 0x0f; val as u8 } - #[doc = "NMOS compensation code"] - pub fn set_ncc(&mut self, val: u8) { + #[doc = "Address of the USART node"] + pub fn set_add(&mut self, val: u8) { self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize); } - #[doc = "PMOS compensation code"] - pub const fn pcc(&self) -> u8 { - let val = (self.0 >> 4usize) & 0x0f; - val as u8 + #[doc = "lin break detection length"] + pub const fn lbdl(&self) -> super::vals::Lbdl { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Lbdl(val as u8) } - #[doc = "PMOS compensation code"] - pub fn set_pcc(&mut self, val: u8) { - self.0 = (self.0 & !(0x0f << 4usize)) | (((val as u32) & 0x0f) << 4usize); + #[doc = "lin break detection length"] + pub fn set_lbdl(&mut self, val: super::vals::Lbdl) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - } - impl Default for Cccr { - fn default() -> Cccr { - Cccr(0) + #[doc = "LIN break detection interrupt enable"] + pub const fn lbdie(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 } - } - #[doc = "SYSCFG user register 6"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ur6(pub u32); - impl Ur6 { - #[doc = "Protected area start address for bank 1"] - pub const fn pa_beg_1(&self) -> u16 { - let val = (self.0 >> 0usize) & 0x0fff; - val as u16 + #[doc = "LIN break detection interrupt enable"] + pub fn set_lbdie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - #[doc = "Protected area start address for bank 1"] - pub fn set_pa_beg_1(&mut self, val: u16) { - self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize); + #[doc = "Last bit clock pulse"] + pub const fn lbcl(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 } - #[doc = "Protected area end address for bank 1"] - pub const fn pa_end_1(&self) -> u16 { - let val = (self.0 >> 16usize) & 0x0fff; - val as u16 + #[doc = "Last bit clock pulse"] + pub fn set_lbcl(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); } - #[doc = "Protected area end address for bank 1"] - pub fn set_pa_end_1(&mut self, val: u16) { - self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize); + #[doc = "Clock phase"] + pub const fn cpha(&self) -> super::vals::Cpha { + let val = (self.0 >> 9usize) & 0x01; + super::vals::Cpha(val as u8) } - } - impl Default for Ur6 { - fn default() -> Ur6 { - Ur6(0) + #[doc = "Clock phase"] + pub fn set_cpha(&mut self, val: super::vals::Cpha) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); } - } - #[doc = "SYSCFG user register 10"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ur10(pub u32); - impl Ur10 { - #[doc = "Protected area end address for bank 2"] - pub const fn pa_end_2(&self) -> u16 { - let val = (self.0 >> 0usize) & 0x0fff; - val as u16 + #[doc = "Clock polarity"] + pub const fn cpol(&self) -> super::vals::Cpol { + let val = (self.0 >> 10usize) & 0x01; + super::vals::Cpol(val as u8) } - #[doc = "Protected area end address for bank 2"] - pub fn set_pa_end_2(&mut self, val: u16) { - self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize); + #[doc = "Clock polarity"] + pub fn set_cpol(&mut self, val: super::vals::Cpol) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); } - #[doc = "Secured area start address for bank 2"] - pub const fn sa_beg_2(&self) -> u16 { - let val = (self.0 >> 16usize) & 0x0fff; - val as u16 + #[doc = "Clock enable"] + pub const fn clken(&self) -> bool { + let val = (self.0 >> 11usize) & 0x01; + val != 0 } - #[doc = "Secured area start address for bank 2"] - pub fn set_sa_beg_2(&mut self, val: u16) { - self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize); + #[doc = "Clock enable"] + pub fn set_clken(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); } - } - impl Default for Ur10 { - fn default() -> Ur10 { - Ur10(0) + #[doc = "STOP bits"] + pub const fn stop(&self) -> super::vals::Stop { + let val = (self.0 >> 12usize) & 0x03; + super::vals::Stop(val as u8) } - } - #[doc = "SYSCFG user register 3"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ur3(pub u32); - impl Ur3 { - #[doc = "Boot Address 1"] - pub const fn boot_add1(&self) -> u16 { - let val = (self.0 >> 16usize) & 0xffff; - val as u16 + #[doc = "STOP bits"] + pub fn set_stop(&mut self, val: super::vals::Stop) { + self.0 = (self.0 & !(0x03 << 12usize)) | (((val.0 as u32) & 0x03) << 12usize); } - #[doc = "Boot Address 1"] - pub fn set_boot_add1(&mut self, val: u16) { - self.0 = (self.0 & !(0xffff << 16usize)) | (((val as u32) & 0xffff) << 16usize); + #[doc = "LIN mode enable"] + pub const fn linen(&self) -> bool { + let val = (self.0 >> 14usize) & 0x01; + val != 0 + } + #[doc = "LIN mode enable"] + pub fn set_linen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); } } - impl Default for Ur3 { - fn default() -> Ur3 { - Ur3(0) + impl Default for Cr2Usart { + fn default() -> Cr2Usart { + Cr2Usart(0) } } - #[doc = "compensation cell control/status register"] + #[doc = "Status register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cccsr(pub u32); - impl Cccsr { - #[doc = "enable"] - pub const fn en(&self) -> bool { + pub struct SrUsart(pub u32); + impl SrUsart { + #[doc = "Parity error"] + pub const fn pe(&self) -> bool { let val = (self.0 >> 0usize) & 0x01; val != 0 } - #[doc = "enable"] - pub fn set_en(&mut self, val: bool) { + #[doc = "Parity error"] + pub fn set_pe(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "Code selection"] - pub const fn cs(&self) -> bool { + #[doc = "Framing error"] + pub const fn fe(&self) -> bool { let val = (self.0 >> 1usize) & 0x01; val != 0 } - #[doc = "Code selection"] - pub fn set_cs(&mut self, val: bool) { + #[doc = "Framing error"] + pub fn set_fe(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - #[doc = "Compensation cell ready flag"] - pub const fn ready(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; + #[doc = "Noise error flag"] + pub const fn ne(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; val != 0 } - #[doc = "Compensation cell ready flag"] - pub fn set_ready(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + #[doc = "Noise error flag"] + pub fn set_ne(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); } - #[doc = "High-speed at low-voltage"] - pub const fn hslv(&self) -> bool { - let val = (self.0 >> 16usize) & 0x01; + #[doc = "Overrun error"] + pub const fn ore(&self) -> bool { + let val = (self.0 >> 3usize) & 0x01; val != 0 } - #[doc = "High-speed at low-voltage"] - pub fn set_hslv(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + #[doc = "Overrun error"] + pub fn set_ore(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); } - } - impl Default for Cccsr { - fn default() -> Cccsr { - Cccsr(0) + #[doc = "IDLE line detected"] + pub const fn idle(&self) -> bool { + let val = (self.0 >> 4usize) & 0x01; + val != 0 } - } - #[doc = "SYSCFG user register 12"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ur12(pub u32); - impl Ur12 { - #[doc = "Secure mode"] - pub const fn secure(&self) -> bool { - let val = (self.0 >> 16usize) & 0x01; + #[doc = "IDLE line detected"] + pub fn set_idle(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); + } + #[doc = "Read data register not empty"] + pub const fn rxne(&self) -> bool { + let val = (self.0 >> 5usize) & 0x01; val != 0 } - #[doc = "Secure mode"] - pub fn set_secure(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + #[doc = "Read data register not empty"] + pub fn set_rxne(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); + } + #[doc = "Transmission complete"] + pub const fn tc(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 + } + #[doc = "Transmission complete"] + pub fn set_tc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + } + #[doc = "Transmit data register empty"] + pub const fn txe(&self) -> bool { + let val = (self.0 >> 7usize) & 0x01; + val != 0 + } + #[doc = "Transmit data register empty"] + pub fn set_txe(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + } + #[doc = "LIN break detection flag"] + pub const fn lbd(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 + } + #[doc = "LIN break detection flag"] + pub fn set_lbd(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + } + #[doc = "CTS flag"] + pub const fn cts(&self) -> bool { + let val = (self.0 >> 9usize) & 0x01; + val != 0 + } + #[doc = "CTS flag"] + pub fn set_cts(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); } } - impl Default for Ur12 { - fn default() -> Ur12 { - Ur12(0) + impl Default for SrUsart { + fn default() -> SrUsart { + SrUsart(0) } } - #[doc = "SYSCFG user register 4"] + #[doc = "Data register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ur4(pub u32); - impl Ur4 { - #[doc = "Mass Erase Protected Area Disabled for bank 1"] - pub const fn mepad_1(&self) -> bool { - let val = (self.0 >> 16usize) & 0x01; - val != 0 + pub struct Dr(pub u32); + impl Dr { + #[doc = "Data value"] + pub const fn dr(&self) -> u16 { + let val = (self.0 >> 0usize) & 0x01ff; + val as u16 } - #[doc = "Mass Erase Protected Area Disabled for bank 1"] - pub fn set_mepad_1(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + #[doc = "Data value"] + pub fn set_dr(&mut self, val: u16) { + self.0 = (self.0 & !(0x01ff << 0usize)) | (((val as u32) & 0x01ff) << 0usize); } } - impl Default for Ur4 { - fn default() -> Ur4 { - Ur4(0) + impl Default for Dr { + fn default() -> Dr { + Dr(0) } } - #[doc = "SYSCFG user register 2"] + #[doc = "Baud rate register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ur2(pub u32); - impl Ur2 { - #[doc = "BOR_LVL Brownout Reset Threshold Level"] - pub const fn borh(&self) -> u8 { - let val = (self.0 >> 0usize) & 0x03; + pub struct Brr(pub u32); + impl Brr { + #[doc = "fraction of USARTDIV"] + pub const fn div_fraction(&self) -> u8 { + let val = (self.0 >> 0usize) & 0x0f; val as u8 } - #[doc = "BOR_LVL Brownout Reset Threshold Level"] - pub fn set_borh(&mut self, val: u8) { - self.0 = (self.0 & !(0x03 << 0usize)) | (((val as u32) & 0x03) << 0usize); + #[doc = "fraction of USARTDIV"] + pub fn set_div_fraction(&mut self, val: u8) { + self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize); } - #[doc = "Boot Address 0"] - pub const fn boot_add0(&self) -> u16 { - let val = (self.0 >> 16usize) & 0xffff; + #[doc = "mantissa of USARTDIV"] + pub const fn div_mantissa(&self) -> u16 { + let val = (self.0 >> 4usize) & 0x0fff; val as u16 } - #[doc = "Boot Address 0"] - pub fn set_boot_add0(&mut self, val: u16) { - self.0 = (self.0 & !(0xffff << 16usize)) | (((val as u32) & 0xffff) << 16usize); + #[doc = "mantissa of USARTDIV"] + pub fn set_div_mantissa(&mut self, val: u16) { + self.0 = (self.0 & !(0x0fff << 4usize)) | (((val as u32) & 0x0fff) << 4usize); } } - impl Default for Ur2 { - fn default() -> Ur2 { - Ur2(0) + impl Default for Brr { + fn default() -> Brr { + Brr(0) } } - #[doc = "SYSCFG power control register"] + #[doc = "Control register 2"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Pwrcr(pub u32); - impl Pwrcr { - #[doc = "Overdrive enable"] - pub const fn oden(&self) -> u8 { + pub struct Cr2(pub u32); + impl Cr2 { + #[doc = "Address of the USART node"] + pub const fn add(&self) -> u8 { let val = (self.0 >> 0usize) & 0x0f; val as u8 } - #[doc = "Overdrive enable"] - pub fn set_oden(&mut self, val: u8) { + #[doc = "Address of the USART node"] + pub fn set_add(&mut self, val: u8) { self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize); } - } - impl Default for Pwrcr { - fn default() -> Pwrcr { - Pwrcr(0) + #[doc = "lin break detection length"] + pub const fn lbdl(&self) -> super::vals::Lbdl { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Lbdl(val as u8) } - } - #[doc = "external interrupt configuration register 2"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Exticr(pub u32); - impl Exticr { - #[doc = "EXTI x configuration (x = 4 to 7)"] - pub fn exti(&self, n: usize) -> u8 { - assert!(n < 4usize); - let offs = 0usize + n * 4usize; - let val = (self.0 >> offs) & 0x0f; - val as u8 + #[doc = "lin break detection length"] + pub fn set_lbdl(&mut self, val: super::vals::Lbdl) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "EXTI x configuration (x = 4 to 7)"] - pub fn set_exti(&mut self, n: usize, val: u8) { - assert!(n < 4usize); - let offs = 0usize + n * 4usize; - self.0 = (self.0 & !(0x0f << offs)) | (((val as u32) & 0x0f) << offs); + #[doc = "LIN break detection interrupt enable"] + pub const fn lbdie(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 + } + #[doc = "LIN break detection interrupt enable"] + pub fn set_lbdie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + } + #[doc = "STOP bits"] + pub const fn stop(&self) -> super::vals::Stop { + let val = (self.0 >> 12usize) & 0x03; + super::vals::Stop(val as u8) + } + #[doc = "STOP bits"] + pub fn set_stop(&mut self, val: super::vals::Stop) { + self.0 = (self.0 & !(0x03 << 12usize)) | (((val.0 as u32) & 0x03) << 12usize); + } + #[doc = "LIN mode enable"] + pub const fn linen(&self) -> bool { + let val = (self.0 >> 14usize) & 0x01; + val != 0 + } + #[doc = "LIN mode enable"] + pub fn set_linen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); } } - impl Default for Exticr { - fn default() -> Exticr { - Exticr(0) + impl Default for Cr2 { + fn default() -> Cr2 { + Cr2(0) } } - #[doc = "SYSCFG user register 15"] + #[doc = "Control register 3"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ur15(pub u32); - impl Ur15 { - #[doc = "Freeze independent watchdog in Standby mode"] - pub const fn fziwdgstb(&self) -> bool { - let val = (self.0 >> 16usize) & 0x01; + pub struct Cr3(pub u32); + impl Cr3 { + #[doc = "Error interrupt enable"] + pub const fn eie(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; val != 0 } - #[doc = "Freeze independent watchdog in Standby mode"] - pub fn set_fziwdgstb(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + #[doc = "Error interrupt enable"] + pub fn set_eie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + } + #[doc = "IrDA mode enable"] + pub const fn iren(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; + val != 0 + } + #[doc = "IrDA mode enable"] + pub fn set_iren(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + } + #[doc = "IrDA low-power"] + pub const fn irlp(&self) -> super::vals::Irlp { + let val = (self.0 >> 2usize) & 0x01; + super::vals::Irlp(val as u8) + } + #[doc = "IrDA low-power"] + pub fn set_irlp(&mut self, val: super::vals::Irlp) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); + } + #[doc = "Half-duplex selection"] + pub const fn hdsel(&self) -> super::vals::Hdsel { + let val = (self.0 >> 3usize) & 0x01; + super::vals::Hdsel(val as u8) + } + #[doc = "Half-duplex selection"] + pub fn set_hdsel(&mut self, val: super::vals::Hdsel) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); + } + #[doc = "DMA enable receiver"] + pub const fn dmar(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 + } + #[doc = "DMA enable receiver"] + pub fn set_dmar(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + } + #[doc = "DMA enable transmitter"] + pub const fn dmat(&self) -> bool { + let val = (self.0 >> 7usize) & 0x01; + val != 0 + } + #[doc = "DMA enable transmitter"] + pub fn set_dmat(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); } } - impl Default for Ur15 { - fn default() -> Ur15 { - Ur15(0) + impl Default for Cr3 { + fn default() -> Cr3 { + Cr3(0) } } - #[doc = "peripheral mode configuration register"] + #[doc = "Control register 3"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Pmcr(pub u32); - impl Pmcr { - #[doc = "I2C1 Fm+"] - pub const fn i2c1fmp(&self) -> bool { + pub struct Cr3Usart(pub u32); + impl Cr3Usart { + #[doc = "Error interrupt enable"] + pub const fn eie(&self) -> bool { let val = (self.0 >> 0usize) & 0x01; val != 0 } - #[doc = "I2C1 Fm+"] - pub fn set_i2c1fmp(&mut self, val: bool) { + #[doc = "Error interrupt enable"] + pub fn set_eie(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "I2C2 Fm+"] - pub const fn i2c2fmp(&self) -> bool { + #[doc = "IrDA mode enable"] + pub const fn iren(&self) -> bool { let val = (self.0 >> 1usize) & 0x01; val != 0 } - #[doc = "I2C2 Fm+"] - pub fn set_i2c2fmp(&mut self, val: bool) { + #[doc = "IrDA mode enable"] + pub fn set_iren(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - #[doc = "I2C3 Fm+"] - pub const fn i2c3fmp(&self) -> bool { + #[doc = "IrDA low-power"] + pub const fn irlp(&self) -> super::vals::Irlp { let val = (self.0 >> 2usize) & 0x01; - val != 0 + super::vals::Irlp(val as u8) } - #[doc = "I2C3 Fm+"] - pub fn set_i2c3fmp(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); + #[doc = "IrDA low-power"] + pub fn set_irlp(&mut self, val: super::vals::Irlp) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); } - #[doc = "I2C4 Fm+"] - pub const fn i2c4fmp(&self) -> bool { + #[doc = "Half-duplex selection"] + pub const fn hdsel(&self) -> super::vals::Hdsel { let val = (self.0 >> 3usize) & 0x01; - val != 0 + super::vals::Hdsel(val as u8) } - #[doc = "I2C4 Fm+"] - pub fn set_i2c4fmp(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); + #[doc = "Half-duplex selection"] + pub fn set_hdsel(&mut self, val: super::vals::Hdsel) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); } - #[doc = "PB(6) Fm+"] - pub const fn pb6fmp(&self) -> bool { + #[doc = "Smartcard NACK enable"] + pub const fn nack(&self) -> bool { let val = (self.0 >> 4usize) & 0x01; val != 0 } - #[doc = "PB(6) Fm+"] - pub fn set_pb6fmp(&mut self, val: bool) { + #[doc = "Smartcard NACK enable"] + pub fn set_nack(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); } - #[doc = "PB(7) Fast Mode Plus"] - pub const fn pb7fmp(&self) -> bool { + #[doc = "Smartcard mode enable"] + pub const fn scen(&self) -> bool { let val = (self.0 >> 5usize) & 0x01; val != 0 } - #[doc = "PB(7) Fast Mode Plus"] - pub fn set_pb7fmp(&mut self, val: bool) { + #[doc = "Smartcard mode enable"] + pub fn set_scen(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); } - #[doc = "PB(8) Fast Mode Plus"] - pub const fn pb8fmp(&self) -> bool { + #[doc = "DMA enable receiver"] + pub const fn dmar(&self) -> bool { let val = (self.0 >> 6usize) & 0x01; val != 0 } - #[doc = "PB(8) Fast Mode Plus"] - pub fn set_pb8fmp(&mut self, val: bool) { + #[doc = "DMA enable receiver"] + pub fn set_dmar(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - #[doc = "PB(9) Fm+"] - pub const fn pb9fmp(&self) -> bool { + #[doc = "DMA enable transmitter"] + pub const fn dmat(&self) -> bool { let val = (self.0 >> 7usize) & 0x01; val != 0 } - #[doc = "PB(9) Fm+"] - pub fn set_pb9fmp(&mut self, val: bool) { + #[doc = "DMA enable transmitter"] + pub fn set_dmat(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); } - #[doc = "Booster Enable"] - pub const fn booste(&self) -> bool { + #[doc = "RTS enable"] + pub const fn rtse(&self) -> bool { let val = (self.0 >> 8usize) & 0x01; val != 0 } - #[doc = "Booster Enable"] - pub fn set_booste(&mut self, val: bool) { + #[doc = "RTS enable"] + pub fn set_rtse(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); } - #[doc = "Analog switch supply voltage selection"] - pub const fn boostvddsel(&self) -> bool { + #[doc = "CTS enable"] + pub const fn ctse(&self) -> bool { let val = (self.0 >> 9usize) & 0x01; val != 0 } - #[doc = "Analog switch supply voltage selection"] - pub fn set_boostvddsel(&mut self, val: bool) { + #[doc = "CTS enable"] + pub fn set_ctse(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); } - #[doc = "Ethernet PHY Interface Selection"] - pub const fn epis(&self) -> u8 { - let val = (self.0 >> 21usize) & 0x07; - val as u8 - } - #[doc = "Ethernet PHY Interface Selection"] - pub fn set_epis(&mut self, val: u8) { - self.0 = (self.0 & !(0x07 << 21usize)) | (((val as u32) & 0x07) << 21usize); - } - #[doc = "PA0 Switch Open"] - pub const fn pa0so(&self) -> bool { - let val = (self.0 >> 24usize) & 0x01; - val != 0 - } - #[doc = "PA0 Switch Open"] - pub fn set_pa0so(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize); - } - #[doc = "PA1 Switch Open"] - pub const fn pa1so(&self) -> bool { - let val = (self.0 >> 25usize) & 0x01; - val != 0 - } - #[doc = "PA1 Switch Open"] - pub fn set_pa1so(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize); - } - #[doc = "PC2 Switch Open"] - pub const fn pc2so(&self) -> bool { - let val = (self.0 >> 26usize) & 0x01; - val != 0 - } - #[doc = "PC2 Switch Open"] - pub fn set_pc2so(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); - } - #[doc = "PC3 Switch Open"] - pub const fn pc3so(&self) -> bool { - let val = (self.0 >> 27usize) & 0x01; + #[doc = "CTS interrupt enable"] + pub const fn ctsie(&self) -> bool { + let val = (self.0 >> 10usize) & 0x01; val != 0 } - #[doc = "PC3 Switch Open"] - pub fn set_pc3so(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize); + #[doc = "CTS interrupt enable"] + pub fn set_ctsie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); } } - impl Default for Pmcr { - fn default() -> Pmcr { - Pmcr(0) + impl Default for Cr3Usart { + fn default() -> Cr3Usart { + Cr3Usart(0) } } - #[doc = "SYSCFG user register 16"] + } +} +pub mod exti_v1 { + use crate::generic::*; + #[doc = "External interrupt/event controller"] + #[derive(Copy, Clone)] + pub struct Exti(pub *mut u8); + unsafe impl Send for Exti {} + unsafe impl Sync for Exti {} + impl Exti { + #[doc = "Interrupt mask register (EXTI_IMR)"] + pub fn imr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(0usize)) } + } + #[doc = "Event mask register (EXTI_EMR)"] + pub fn emr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(4usize)) } + } + #[doc = "Rising Trigger selection register (EXTI_RTSR)"] + pub fn rtsr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(8usize)) } + } + #[doc = "Falling Trigger selection register (EXTI_FTSR)"] + pub fn ftsr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(12usize)) } + } + #[doc = "Software interrupt event register (EXTI_SWIER)"] + pub fn swier(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(16usize)) } + } + #[doc = "Pending register (EXTI_PR)"] + pub fn pr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(20usize)) } + } + } + pub mod regs { + use crate::generic::*; + #[doc = "Rising Trigger selection register (EXTI_RTSR)"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ur16(pub u32); - impl Ur16 { - #[doc = "Freeze independent watchdog in Stop mode"] - pub const fn fziwdgstp(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; - val != 0 - } - #[doc = "Freeze independent watchdog in Stop mode"] - pub fn set_fziwdgstp(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); - } - #[doc = "Private key programmed"] - pub const fn pkp(&self) -> bool { - let val = (self.0 >> 16usize) & 0x01; - val != 0 + pub struct Rtsr(pub u32); + impl Rtsr { + #[doc = "Rising trigger event configuration of line 0"] + pub fn tr(&self, n: usize) -> super::vals::Tr { + assert!(n < 23usize); + let offs = 0usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; + super::vals::Tr(val as u8) } - #[doc = "Private key programmed"] - pub fn set_pkp(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + #[doc = "Rising trigger event configuration of line 0"] + pub fn set_tr(&mut self, n: usize, val: super::vals::Tr) { + assert!(n < 23usize); + let offs = 0usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); } } - impl Default for Ur16 { - fn default() -> Ur16 { - Ur16(0) + impl Default for Rtsr { + fn default() -> Rtsr { + Rtsr(0) } } - #[doc = "SYSCFG user register 17"] + #[doc = "Software interrupt event register (EXTI_SWIER)"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ur17(pub u32); - impl Ur17 { - #[doc = "I/O high speed / low voltage"] - pub const fn io_hslv(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; + pub struct Swier(pub u32); + impl Swier { + #[doc = "Software Interrupt on line 0"] + pub fn swier(&self, n: usize) -> bool { + assert!(n < 23usize); + let offs = 0usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; val != 0 } - #[doc = "I/O high speed / low voltage"] - pub fn set_io_hslv(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + #[doc = "Software Interrupt on line 0"] + pub fn set_swier(&mut self, n: usize, val: bool) { + assert!(n < 23usize); + let offs = 0usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } } - impl Default for Ur17 { - fn default() -> Ur17 { - Ur17(0) + impl Default for Swier { + fn default() -> Swier { + Swier(0) } } - } -} -pub mod dbgmcu_h7 { - use crate::generic::*; - #[doc = "Debug support"] - #[derive(Copy, Clone)] - pub struct Dbgmcu(pub *mut u8); - unsafe impl Send for Dbgmcu {} - unsafe impl Sync for Dbgmcu {} - impl Dbgmcu { - #[doc = "Identity code"] - pub fn idc(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(0usize)) } - } - #[doc = "Configuration register"] - pub fn cr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(4usize)) } - } - #[doc = "APB3 peripheral freeze register"] - pub fn apb3fz1(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(52usize)) } - } - #[doc = "APB1L peripheral freeze register"] - pub fn apb1lfz1(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(60usize)) } - } - #[doc = "APB2 peripheral freeze register"] - pub fn apb2fz1(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(76usize)) } - } - #[doc = "APB4 peripheral freeze register"] - pub fn apb4fz1(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(84usize)) } - } - } - pub mod regs { - use crate::generic::*; - #[doc = "Configuration register"] + #[doc = "Interrupt mask register (EXTI_IMR)"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr(pub u32); - impl Cr { - #[doc = "Allow debug in D1 Sleep mode"] - pub const fn dbgsleep_d1(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; - val != 0 - } - #[doc = "Allow debug in D1 Sleep mode"] - pub fn set_dbgsleep_d1(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); - } - #[doc = "Allow debug in D1 Stop mode"] - pub const fn dbgstop_d1(&self) -> bool { - let val = (self.0 >> 1usize) & 0x01; - val != 0 - } - #[doc = "Allow debug in D1 Stop mode"] - pub fn set_dbgstop_d1(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); - } - #[doc = "Allow debug in D1 Standby mode"] - pub const fn dbgstby_d1(&self) -> bool { - let val = (self.0 >> 2usize) & 0x01; - val != 0 - } - #[doc = "Allow debug in D1 Standby mode"] - pub fn set_dbgstby_d1(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); - } - #[doc = "Trace clock enable enable"] - pub const fn traceclken(&self) -> bool { - let val = (self.0 >> 20usize) & 0x01; - val != 0 - } - #[doc = "Trace clock enable enable"] - pub fn set_traceclken(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize); - } - #[doc = "D1 debug clock enable enable"] - pub const fn d1dbgcken(&self) -> bool { - let val = (self.0 >> 21usize) & 0x01; - val != 0 - } - #[doc = "D1 debug clock enable enable"] - pub fn set_d1dbgcken(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); + pub struct Imr(pub u32); + impl Imr { + #[doc = "Interrupt Mask on line 0"] + pub fn mr(&self, n: usize) -> super::vals::Mr { + assert!(n < 23usize); + let offs = 0usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; + super::vals::Mr(val as u8) } - #[doc = "D3 debug clock enable enable"] - pub const fn d3dbgcken(&self) -> bool { - let val = (self.0 >> 22usize) & 0x01; - val != 0 + #[doc = "Interrupt Mask on line 0"] + pub fn set_mr(&mut self, n: usize, val: super::vals::Mr) { + assert!(n < 23usize); + let offs = 0usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); } - #[doc = "D3 debug clock enable enable"] - pub fn set_d3dbgcken(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); + } + impl Default for Imr { + fn default() -> Imr { + Imr(0) } - #[doc = "External trigger output enable"] - pub const fn trgoen(&self) -> bool { - let val = (self.0 >> 28usize) & 0x01; + } + #[doc = "Pending register (EXTI_PR)"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Pr(pub u32); + impl Pr { + #[doc = "Pending bit 0"] + pub fn pr(&self, n: usize) -> bool { + assert!(n < 23usize); + let offs = 0usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; val != 0 } - #[doc = "External trigger output enable"] - pub fn set_trgoen(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize); + #[doc = "Pending bit 0"] + pub fn set_pr(&mut self, n: usize, val: bool) { + assert!(n < 23usize); + let offs = 0usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } } - impl Default for Cr { - fn default() -> Cr { - Cr(0) + impl Default for Pr { + fn default() -> Pr { + Pr(0) } } - #[doc = "Identity code"] + #[doc = "Event mask register (EXTI_EMR)"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Idc(pub u32); - impl Idc { - #[doc = "Device ID"] - pub const fn dev_id(&self) -> u16 { - let val = (self.0 >> 0usize) & 0x0fff; - val as u16 - } - #[doc = "Device ID"] - pub fn set_dev_id(&mut self, val: u16) { - self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize); - } - #[doc = "Revision ID"] - pub const fn rev_id(&self) -> u16 { - let val = (self.0 >> 16usize) & 0xffff; - val as u16 + pub struct Emr(pub u32); + impl Emr { + #[doc = "Event Mask on line 0"] + pub fn mr(&self, n: usize) -> super::vals::Mr { + assert!(n < 23usize); + let offs = 0usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; + super::vals::Mr(val as u8) } - #[doc = "Revision ID"] - pub fn set_rev_id(&mut self, val: u16) { - self.0 = (self.0 & !(0xffff << 16usize)) | (((val as u32) & 0xffff) << 16usize); + #[doc = "Event Mask on line 0"] + pub fn set_mr(&mut self, n: usize, val: super::vals::Mr) { + assert!(n < 23usize); + let offs = 0usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); } } - impl Default for Idc { - fn default() -> Idc { - Idc(0) + impl Default for Emr { + fn default() -> Emr { + Emr(0) } } - #[doc = "APB2 peripheral freeze register"] + #[doc = "Falling Trigger selection register (EXTI_FTSR)"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Apb2fz1(pub u32); - impl Apb2fz1 { - #[doc = "TIM1 stop in debug mode"] - pub const fn tim1(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; - val != 0 + pub struct Ftsr(pub u32); + impl Ftsr { + #[doc = "Falling trigger event configuration of line 0"] + pub fn tr(&self, n: usize) -> super::vals::Tr { + assert!(n < 23usize); + let offs = 0usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; + super::vals::Tr(val as u8) } - #[doc = "TIM1 stop in debug mode"] - pub fn set_tim1(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); - } - #[doc = "TIM8 stop in debug mode"] - pub const fn tim8(&self) -> bool { - let val = (self.0 >> 1usize) & 0x01; - val != 0 + #[doc = "Falling trigger event configuration of line 0"] + pub fn set_tr(&mut self, n: usize, val: super::vals::Tr) { + assert!(n < 23usize); + let offs = 0usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); } - #[doc = "TIM8 stop in debug mode"] - pub fn set_tim8(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + } + impl Default for Ftsr { + fn default() -> Ftsr { + Ftsr(0) } - #[doc = "TIM15 stop in debug mode"] - pub const fn tim15(&self) -> bool { - let val = (self.0 >> 16usize) & 0x01; + } + } + pub mod vals { + use crate::generic::*; + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Tr(pub u8); + impl Tr { + #[doc = "Falling edge trigger is disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "Falling edge trigger is enabled"] + pub const ENABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Mr(pub u8); + impl Mr { + #[doc = "Interrupt request line is masked"] + pub const MASKED: Self = Self(0); + #[doc = "Interrupt request line is unmasked"] + pub const UNMASKED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Prr(pub u8); + impl Prr { + #[doc = "No trigger request occurred"] + pub const NOTPENDING: Self = Self(0); + #[doc = "Selected trigger request occurred"] + pub const PENDING: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Swierw(pub u8); + impl Swierw { + #[doc = "Generates an interrupt request"] + pub const PEND: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Prw(pub u8); + impl Prw { + #[doc = "Clears pending bit"] + pub const CLEAR: Self = Self(0x01); + } + } +} +pub mod gpio_v1 { + use crate::generic::*; + #[doc = "General purpose I/O"] + #[derive(Copy, Clone)] + pub struct Gpio(pub *mut u8); + unsafe impl Send for Gpio {} + unsafe impl Sync for Gpio {} + impl Gpio { + #[doc = "Port configuration register low (GPIOn_CRL)"] + pub fn cr(self, n: usize) -> Reg { + assert!(n < 2usize); + unsafe { Reg::from_ptr(self.0.add(0usize + n * 4usize)) } + } + #[doc = "Port input data register (GPIOn_IDR)"] + pub fn idr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(8usize)) } + } + #[doc = "Port output data register (GPIOn_ODR)"] + pub fn odr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(12usize)) } + } + #[doc = "Port bit set/reset register (GPIOn_BSRR)"] + pub fn bsrr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(16usize)) } + } + #[doc = "Port bit reset register (GPIOn_BRR)"] + pub fn brr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(20usize)) } + } + #[doc = "Port configuration lock register"] + pub fn lckr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(24usize)) } + } + } + pub mod regs { + use crate::generic::*; + #[doc = "Port bit set/reset register (GPIOn_BSRR)"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Bsrr(pub u32); + impl Bsrr { + #[doc = "Set bit"] + pub fn bs(&self, n: usize) -> bool { + assert!(n < 16usize); + let offs = 0usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; val != 0 } - #[doc = "TIM15 stop in debug mode"] - pub fn set_tim15(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + #[doc = "Set bit"] + pub fn set_bs(&mut self, n: usize, val: bool) { + assert!(n < 16usize); + let offs = 0usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "TIM16 stop in debug mode"] - pub const fn tim16(&self) -> bool { - let val = (self.0 >> 17usize) & 0x01; + #[doc = "Reset bit"] + pub fn br(&self, n: usize) -> bool { + assert!(n < 16usize); + let offs = 16usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; val != 0 } - #[doc = "TIM16 stop in debug mode"] - pub fn set_tim16(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); + #[doc = "Reset bit"] + pub fn set_br(&mut self, n: usize, val: bool) { + assert!(n < 16usize); + let offs = 16usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "TIM17 stop in debug mode"] - pub const fn tim17(&self) -> bool { - let val = (self.0 >> 18usize) & 0x01; - val != 0 + } + impl Default for Bsrr { + fn default() -> Bsrr { + Bsrr(0) } - #[doc = "TIM17 stop in debug mode"] - pub fn set_tim17(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize); + } + #[doc = "Port configuration lock register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Lckr(pub u32); + impl Lckr { + #[doc = "Port A Lock bit"] + pub fn lck(&self, n: usize) -> super::vals::Lck { + assert!(n < 16usize); + let offs = 0usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; + super::vals::Lck(val as u8) } - #[doc = "HRTIM stop in debug mode"] - pub const fn hrtim(&self) -> bool { - let val = (self.0 >> 29usize) & 0x01; - val != 0 + #[doc = "Port A Lock bit"] + pub fn set_lck(&mut self, n: usize, val: super::vals::Lck) { + assert!(n < 16usize); + let offs = 0usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); } - #[doc = "HRTIM stop in debug mode"] - pub fn set_hrtim(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 29usize)) | (((val as u32) & 0x01) << 29usize); + #[doc = "Lock key"] + pub const fn lckk(&self) -> super::vals::Lckk { + let val = (self.0 >> 16usize) & 0x01; + super::vals::Lckk(val as u8) + } + #[doc = "Lock key"] + pub fn set_lckk(&mut self, val: super::vals::Lckk) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); } } - impl Default for Apb2fz1 { - fn default() -> Apb2fz1 { - Apb2fz1(0) + impl Default for Lckr { + fn default() -> Lckr { + Lckr(0) } } - #[doc = "APB4 peripheral freeze register"] + #[doc = "Port configuration register (GPIOn_CRx)"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Apb4fz1(pub u32); - impl Apb4fz1 { - #[doc = "I2C4 SMBUS timeout stop in debug mode"] - pub const fn i2c4(&self) -> bool { - let val = (self.0 >> 7usize) & 0x01; - val != 0 - } - #[doc = "I2C4 SMBUS timeout stop in debug mode"] - pub fn set_i2c4(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + pub struct Cr(pub u32); + impl Cr { + #[doc = "Port n mode bits"] + pub fn mode(&self, n: usize) -> super::vals::Mode { + assert!(n < 8usize); + let offs = 0usize + n * 4usize; + let val = (self.0 >> offs) & 0x03; + super::vals::Mode(val as u8) } - #[doc = "LPTIM2 stop in debug mode"] - pub const fn lptim2(&self) -> bool { - let val = (self.0 >> 9usize) & 0x01; - val != 0 + #[doc = "Port n mode bits"] + pub fn set_mode(&mut self, n: usize, val: super::vals::Mode) { + assert!(n < 8usize); + let offs = 0usize + n * 4usize; + self.0 = (self.0 & !(0x03 << offs)) | (((val.0 as u32) & 0x03) << offs); } - #[doc = "LPTIM2 stop in debug mode"] - pub fn set_lptim2(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + #[doc = "Port n configuration bits"] + pub fn cnf(&self, n: usize) -> super::vals::Cnf { + assert!(n < 8usize); + let offs = 2usize + n * 4usize; + let val = (self.0 >> offs) & 0x03; + super::vals::Cnf(val as u8) } - #[doc = "LPTIM3 stop in debug mode"] - pub const fn lptim3(&self) -> bool { - let val = (self.0 >> 10usize) & 0x01; - val != 0 + #[doc = "Port n configuration bits"] + pub fn set_cnf(&mut self, n: usize, val: super::vals::Cnf) { + assert!(n < 8usize); + let offs = 2usize + n * 4usize; + self.0 = (self.0 & !(0x03 << offs)) | (((val.0 as u32) & 0x03) << offs); } - #[doc = "LPTIM3 stop in debug mode"] - pub fn set_lptim3(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); + } + impl Default for Cr { + fn default() -> Cr { + Cr(0) } - #[doc = "LPTIM4 stop in debug mode"] - pub const fn lptim4(&self) -> bool { - let val = (self.0 >> 11usize) & 0x01; + } + #[doc = "Port bit reset register (GPIOn_BRR)"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Brr(pub u32); + impl Brr { + #[doc = "Reset bit"] + pub fn br(&self, n: usize) -> bool { + assert!(n < 16usize); + let offs = 0usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; val != 0 } - #[doc = "LPTIM4 stop in debug mode"] - pub fn set_lptim4(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); - } - #[doc = "LPTIM5 stop in debug mode"] - pub const fn lptim5(&self) -> bool { - let val = (self.0 >> 12usize) & 0x01; - val != 0 - } - #[doc = "LPTIM5 stop in debug mode"] - pub fn set_lptim5(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); - } - #[doc = "RTC stop in debug mode"] - pub const fn rtc(&self) -> bool { - let val = (self.0 >> 16usize) & 0x01; - val != 0 + #[doc = "Reset bit"] + pub fn set_br(&mut self, n: usize, val: bool) { + assert!(n < 16usize); + let offs = 0usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "RTC stop in debug mode"] - pub fn set_rtc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + } + impl Default for Brr { + fn default() -> Brr { + Brr(0) } - #[doc = "Independent watchdog for D1 stop in debug mode"] - pub const fn iwdg1(&self) -> bool { - let val = (self.0 >> 18usize) & 0x01; - val != 0 + } + #[doc = "Port output data register (GPIOn_ODR)"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Odr(pub u32); + impl Odr { + #[doc = "Port output data"] + pub fn odr(&self, n: usize) -> super::vals::Odr { + assert!(n < 16usize); + let offs = 0usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; + super::vals::Odr(val as u8) } - #[doc = "Independent watchdog for D1 stop in debug mode"] - pub fn set_iwdg1(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize); + #[doc = "Port output data"] + pub fn set_odr(&mut self, n: usize, val: super::vals::Odr) { + assert!(n < 16usize); + let offs = 0usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); } } - impl Default for Apb4fz1 { - fn default() -> Apb4fz1 { - Apb4fz1(0) + impl Default for Odr { + fn default() -> Odr { + Odr(0) } } - #[doc = "APB3 peripheral freeze register"] + #[doc = "Port input data register (GPIOn_IDR)"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Apb3fz1(pub u32); - impl Apb3fz1 { - #[doc = "WWDG1 stop in debug mode"] - pub const fn wwdg1(&self) -> bool { - let val = (self.0 >> 6usize) & 0x01; - val != 0 + pub struct Idr(pub u32); + impl Idr { + #[doc = "Port input data"] + pub fn idr(&self, n: usize) -> super::vals::Idr { + assert!(n < 16usize); + let offs = 0usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; + super::vals::Idr(val as u8) } - #[doc = "WWDG1 stop in debug mode"] - pub fn set_wwdg1(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + #[doc = "Port input data"] + pub fn set_idr(&mut self, n: usize, val: super::vals::Idr) { + assert!(n < 16usize); + let offs = 0usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); } } - impl Default for Apb3fz1 { - fn default() -> Apb3fz1 { - Apb3fz1(0) + impl Default for Idr { + fn default() -> Idr { + Idr(0) } } - #[doc = "APB1L peripheral freeze register"] + } + pub mod vals { + use crate::generic::*; + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Idr(pub u8); + impl Idr { + #[doc = "Input is logic low"] + pub const LOW: Self = Self(0); + #[doc = "Input is logic high"] + pub const HIGH: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Lck(pub u8); + impl Lck { + #[doc = "Port configuration not locked"] + pub const UNLOCKED: Self = Self(0); + #[doc = "Port configuration locked"] + pub const LOCKED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Odr(pub u8); + impl Odr { + #[doc = "Set output to logic low"] + pub const LOW: Self = Self(0); + #[doc = "Set output to logic high"] + pub const HIGH: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Cnf(pub u8); + impl Cnf { + #[doc = "Analog mode / Push-Pull mode"] + pub const PUSHPULL: Self = Self(0); + #[doc = "Floating input (reset state) / Open Drain-Mode"] + pub const OPENDRAIN: Self = Self(0x01); + #[doc = "Input with pull-up/pull-down / Alternate Function Push-Pull Mode"] + pub const ALTPUSHPULL: Self = Self(0x02); + #[doc = "Alternate Function Open-Drain Mode"] + pub const ALTOPENDRAIN: Self = Self(0x03); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Bsw(pub u8); + impl Bsw { + #[doc = "No action on the corresponding ODx bit"] + pub const NOACTION: Self = Self(0); + #[doc = "Sets the corresponding ODRx bit"] + pub const SET: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Lckk(pub u8); + impl Lckk { + #[doc = "Port configuration lock key not active"] + pub const NOTACTIVE: Self = Self(0); + #[doc = "Port configuration lock key active"] + pub const ACTIVE: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Brw(pub u8); + impl Brw { + #[doc = "No action on the corresponding ODx bit"] + pub const NOACTION: Self = Self(0); + #[doc = "Reset the ODx bit"] + pub const RESET: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Mode(pub u8); + impl Mode { + #[doc = "Input mode (reset state)"] + pub const INPUT: Self = Self(0); + #[doc = "Output mode 10 MHz"] + pub const OUTPUT: Self = Self(0x01); + #[doc = "Output mode 2 MHz"] + pub const OUTPUT2: Self = Self(0x02); + #[doc = "Output mode 50 MHz"] + pub const OUTPUT50: Self = Self(0x03); + } + } +} +pub mod usart_v2 { + use crate::generic::*; + #[doc = "Universal synchronous asynchronous receiver transmitter"] + #[derive(Copy, Clone)] + pub struct Usart(pub *mut u8); + unsafe impl Send for Usart {} + unsafe impl Sync for Usart {} + impl Usart { + #[doc = "Control register 1"] + pub fn cr1(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(0usize)) } + } + #[doc = "Control register 2"] + pub fn cr2(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(4usize)) } + } + #[doc = "Control register 3"] + pub fn cr3(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(8usize)) } + } + #[doc = "Baud rate register"] + pub fn brr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(12usize)) } + } + #[doc = "Guard time and prescaler register"] + pub fn gtpr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(16usize)) } + } + #[doc = "Receiver timeout register"] + pub fn rtor(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(20usize)) } + } + #[doc = "Request register"] + pub fn rqr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(24usize)) } + } + #[doc = "Interrupt & status register"] + pub fn isr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(28usize)) } + } + #[doc = "Interrupt flag clear register"] + pub fn icr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(32usize)) } + } + #[doc = "Receive data register"] + pub fn rdr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(36usize)) } + } + #[doc = "Transmit data register"] + pub fn tdr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(40usize)) } + } + } + pub mod regs { + use crate::generic::*; + #[doc = "Interrupt & status register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Apb1lfz1(pub u32); - impl Apb1lfz1 { - #[doc = "TIM2 stop in debug mode"] - pub const fn tim2(&self) -> bool { + pub struct Ixr(pub u32); + impl Ixr { + #[doc = "Parity error"] + pub const fn pe(&self) -> bool { let val = (self.0 >> 0usize) & 0x01; val != 0 } - #[doc = "TIM2 stop in debug mode"] - pub fn set_tim2(&mut self, val: bool) { + #[doc = "Parity error"] + pub fn set_pe(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "TIM3 stop in debug mode"] - pub const fn tim3(&self) -> bool { + #[doc = "Framing error"] + pub const fn fe(&self) -> bool { let val = (self.0 >> 1usize) & 0x01; val != 0 } - #[doc = "TIM3 stop in debug mode"] - pub fn set_tim3(&mut self, val: bool) { + #[doc = "Framing error"] + pub fn set_fe(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - #[doc = "TIM4 stop in debug mode"] - pub const fn tim4(&self) -> bool { + #[doc = "Noise detected flag"] + pub const fn nf(&self) -> bool { let val = (self.0 >> 2usize) & 0x01; val != 0 } - #[doc = "TIM4 stop in debug mode"] - pub fn set_tim4(&mut self, val: bool) { + #[doc = "Noise detected flag"] + pub fn set_nf(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); } - #[doc = "TIM5 stop in debug mode"] - pub const fn tim5(&self) -> bool { + #[doc = "Overrun error"] + pub const fn ore(&self) -> bool { let val = (self.0 >> 3usize) & 0x01; val != 0 } - #[doc = "TIM5 stop in debug mode"] - pub fn set_tim5(&mut self, val: bool) { + #[doc = "Overrun error"] + pub fn set_ore(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); } - #[doc = "TIM6 stop in debug mode"] - pub const fn tim6(&self) -> bool { + #[doc = "Idle line detected"] + pub const fn idle(&self) -> bool { let val = (self.0 >> 4usize) & 0x01; val != 0 } - #[doc = "TIM6 stop in debug mode"] - pub fn set_tim6(&mut self, val: bool) { + #[doc = "Idle line detected"] + pub fn set_idle(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); } - #[doc = "TIM7 stop in debug mode"] - pub const fn tim7(&self) -> bool { + #[doc = "Read data register not empty"] + pub const fn rxne(&self) -> bool { let val = (self.0 >> 5usize) & 0x01; val != 0 } - #[doc = "TIM7 stop in debug mode"] - pub fn set_tim7(&mut self, val: bool) { + #[doc = "Read data register not empty"] + pub fn set_rxne(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); } - #[doc = "TIM12 stop in debug mode"] - pub const fn tim12(&self) -> bool { + #[doc = "Transmission complete"] + pub const fn tc(&self) -> bool { let val = (self.0 >> 6usize) & 0x01; val != 0 } - #[doc = "TIM12 stop in debug mode"] - pub fn set_tim12(&mut self, val: bool) { + #[doc = "Transmission complete"] + pub fn set_tc(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - #[doc = "TIM13 stop in debug mode"] - pub const fn tim13(&self) -> bool { + #[doc = "Transmit data register empty"] + pub const fn txe(&self) -> bool { let val = (self.0 >> 7usize) & 0x01; val != 0 } - #[doc = "TIM13 stop in debug mode"] - pub fn set_tim13(&mut self, val: bool) { + #[doc = "Transmit data register empty"] + pub fn set_txe(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); } - #[doc = "TIM14 stop in debug mode"] - pub const fn tim14(&self) -> bool { + #[doc = "LIN break detection flag"] + pub const fn lbdf(&self) -> bool { let val = (self.0 >> 8usize) & 0x01; val != 0 } - #[doc = "TIM14 stop in debug mode"] - pub fn set_tim14(&mut self, val: bool) { + #[doc = "LIN break detection flag"] + pub fn set_lbdf(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); } - #[doc = "LPTIM1 stop in debug mode"] - pub const fn lptim1(&self) -> bool { + #[doc = "CTS interrupt flag"] + pub const fn ctsif(&self) -> bool { let val = (self.0 >> 9usize) & 0x01; val != 0 } - #[doc = "LPTIM1 stop in debug mode"] - pub fn set_lptim1(&mut self, val: bool) { + #[doc = "CTS interrupt flag"] + pub fn set_ctsif(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); } - #[doc = "I2C1 SMBUS timeout stop in debug mode"] - pub const fn i2c1(&self) -> bool { + #[doc = "CTS flag"] + pub const fn cts(&self) -> bool { + let val = (self.0 >> 10usize) & 0x01; + val != 0 + } + #[doc = "CTS flag"] + pub fn set_cts(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); + } + #[doc = "Receiver timeout"] + pub const fn rtof(&self) -> bool { + let val = (self.0 >> 11usize) & 0x01; + val != 0 + } + #[doc = "Receiver timeout"] + pub fn set_rtof(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); + } + #[doc = "End of block flag"] + pub const fn eobf(&self) -> bool { + let val = (self.0 >> 12usize) & 0x01; + val != 0 + } + #[doc = "End of block flag"] + pub fn set_eobf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); + } + #[doc = "Auto baud rate error"] + pub const fn abre(&self) -> bool { + let val = (self.0 >> 14usize) & 0x01; + val != 0 + } + #[doc = "Auto baud rate error"] + pub fn set_abre(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); + } + #[doc = "Auto baud rate flag"] + pub const fn abrf(&self) -> bool { + let val = (self.0 >> 15usize) & 0x01; + val != 0 + } + #[doc = "Auto baud rate flag"] + pub fn set_abrf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); + } + #[doc = "Busy flag"] + pub const fn busy(&self) -> bool { + let val = (self.0 >> 16usize) & 0x01; + val != 0 + } + #[doc = "Busy flag"] + pub fn set_busy(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + } + #[doc = "character match flag"] + pub const fn cmf(&self) -> bool { + let val = (self.0 >> 17usize) & 0x01; + val != 0 + } + #[doc = "character match flag"] + pub fn set_cmf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); + } + #[doc = "Send break flag"] + pub const fn sbkf(&self) -> bool { + let val = (self.0 >> 18usize) & 0x01; + val != 0 + } + #[doc = "Send break flag"] + pub fn set_sbkf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize); + } + #[doc = "Receiver wakeup from Mute mode"] + pub const fn rwu(&self) -> bool { + let val = (self.0 >> 19usize) & 0x01; + val != 0 + } + #[doc = "Receiver wakeup from Mute mode"] + pub fn set_rwu(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize); + } + #[doc = "Wakeup from Stop mode flag"] + pub const fn wuf(&self) -> bool { + let val = (self.0 >> 20usize) & 0x01; + val != 0 + } + #[doc = "Wakeup from Stop mode flag"] + pub fn set_wuf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize); + } + #[doc = "Transmit enable acknowledge flag"] + pub const fn teack(&self) -> bool { let val = (self.0 >> 21usize) & 0x01; val != 0 } - #[doc = "I2C1 SMBUS timeout stop in debug mode"] - pub fn set_i2c1(&mut self, val: bool) { + #[doc = "Transmit enable acknowledge flag"] + pub fn set_teack(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); } - #[doc = "I2C2 SMBUS timeout stop in debug mode"] - pub const fn i2c2(&self) -> bool { + #[doc = "Receive enable acknowledge flag"] + pub const fn reack(&self) -> bool { let val = (self.0 >> 22usize) & 0x01; val != 0 } - #[doc = "I2C2 SMBUS timeout stop in debug mode"] - pub fn set_i2c2(&mut self, val: bool) { + #[doc = "Receive enable acknowledge flag"] + pub fn set_reack(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); } - #[doc = "I2C3 SMBUS timeout stop in debug mode"] - pub const fn i2c3(&self) -> bool { - let val = (self.0 >> 23usize) & 0x01; - val != 0 - } - #[doc = "I2C3 SMBUS timeout stop in debug mode"] - pub fn set_i2c3(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize); - } } - impl Default for Apb1lfz1 { - fn default() -> Apb1lfz1 { - Apb1lfz1(0) + impl Default for Ixr { + fn default() -> Ixr { + Ixr(0) } } - } -} -pub mod spi_v1 { - use crate::generic::*; - #[doc = "Serial peripheral interface"] - #[derive(Copy, Clone)] - pub struct Spi(pub *mut u8); - unsafe impl Send for Spi {} - unsafe impl Sync for Spi {} - impl Spi { - #[doc = "control register 1"] - pub fn cr1(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(0usize)) } - } - #[doc = "control register 2"] - pub fn cr2(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(4usize)) } - } - #[doc = "status register"] - pub fn sr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(8usize)) } - } - #[doc = "data register"] - pub fn dr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(12usize)) } - } - #[doc = "CRC polynomial register"] - pub fn crcpr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(16usize)) } - } - #[doc = "RX CRC register"] - pub fn rxcrcr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(20usize)) } - } - #[doc = "TX CRC register"] - pub fn txcrcr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(24usize)) } - } - } - pub mod vals { - use crate::generic::*; - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Br(pub u8); - impl Br { - #[doc = "f_PCLK / 2"] - pub const DIV2: Self = Self(0); - #[doc = "f_PCLK / 4"] - pub const DIV4: Self = Self(0x01); - #[doc = "f_PCLK / 8"] - pub const DIV8: Self = Self(0x02); - #[doc = "f_PCLK / 16"] - pub const DIV16: Self = Self(0x03); - #[doc = "f_PCLK / 32"] - pub const DIV32: Self = Self(0x04); - #[doc = "f_PCLK / 64"] - pub const DIV64: Self = Self(0x05); - #[doc = "f_PCLK / 128"] - pub const DIV128: Self = Self(0x06); - #[doc = "f_PCLK / 256"] - pub const DIV256: Self = Self(0x07); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Dff(pub u8); - impl Dff { - #[doc = "8-bit data frame format is selected for transmission/reception"] - pub const EIGHTBIT: Self = Self(0); - #[doc = "16-bit data frame format is selected for transmission/reception"] - pub const SIXTEENBIT: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Iscfg(pub u8); - impl Iscfg { - #[doc = "Slave - transmit"] - pub const SLAVETX: Self = Self(0); - #[doc = "Slave - receive"] - pub const SLAVERX: Self = Self(0x01); - #[doc = "Master - transmit"] - pub const MASTERTX: Self = Self(0x02); - #[doc = "Master - receive"] - pub const MASTERRX: Self = Self(0x03); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Rxonly(pub u8); - impl Rxonly { - #[doc = "Full duplex (Transmit and receive)"] - pub const FULLDUPLEX: Self = Self(0); - #[doc = "Output disabled (Receive-only mode)"] - pub const OUTPUTDISABLED: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Cpol(pub u8); - impl Cpol { - #[doc = "CK to 0 when idle"] - pub const IDLELOW: Self = Self(0); - #[doc = "CK to 1 when idle"] - pub const IDLEHIGH: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Crcnext(pub u8); - impl Crcnext { - #[doc = "Next transmit value is from Tx buffer"] - pub const TXBUFFER: Self = Self(0); - #[doc = "Next transmit value is from Tx CRC register"] - pub const CRC: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Mstr(pub u8); - impl Mstr { - #[doc = "Slave configuration"] - pub const SLAVE: Self = Self(0); - #[doc = "Master configuration"] - pub const MASTER: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lsbfirst(pub u8); - impl Lsbfirst { - #[doc = "Data is transmitted/received with the MSB first"] - pub const MSBFIRST: Self = Self(0); - #[doc = "Data is transmitted/received with the LSB first"] - pub const LSBFIRST: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Frer(pub u8); - impl Frer { - #[doc = "No frame format error"] - pub const NOERROR: Self = Self(0); - #[doc = "A frame format error occurred"] - pub const ERROR: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Bidimode(pub u8); - impl Bidimode { - #[doc = "2-line unidirectional data mode selected"] - pub const UNIDIRECTIONAL: Self = Self(0); - #[doc = "1-line bidirectional data mode selected"] - pub const BIDIRECTIONAL: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Bidioe(pub u8); - impl Bidioe { - #[doc = "Output disabled (receive-only mode)"] - pub const OUTPUTDISABLED: Self = Self(0); - #[doc = "Output enabled (transmit-only mode)"] - pub const OUTPUTENABLED: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Frf(pub u8); - impl Frf { - #[doc = "SPI Motorola mode"] - pub const MOTOROLA: Self = Self(0); - #[doc = "SPI TI mode"] - pub const TI: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Cpha(pub u8); - impl Cpha { - #[doc = "The first clock transition is the first data capture edge"] - pub const FIRSTEDGE: Self = Self(0); - #[doc = "The second clock transition is the first data capture edge"] - pub const SECONDEDGE: Self = Self(0x01); - } - } - pub mod regs { - use crate::generic::*; - #[doc = "RX CRC register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Rxcrcr(pub u32); - impl Rxcrcr { - #[doc = "Rx CRC register"] - pub const fn rx_crc(&self) -> u16 { - let val = (self.0 >> 0usize) & 0xffff; - val as u16 - } - #[doc = "Rx CRC register"] - pub fn set_rx_crc(&mut self, val: u16) { - self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); - } - } - impl Default for Rxcrcr { - fn default() -> Rxcrcr { - Rxcrcr(0) - } - } - #[doc = "status register"] + #[doc = "Control register 3"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Sr(pub u32); - impl Sr { - #[doc = "Receive buffer not empty"] - pub const fn rxne(&self) -> bool { + pub struct Cr3(pub u32); + impl Cr3 { + #[doc = "Error interrupt enable"] + pub const fn eie(&self) -> bool { let val = (self.0 >> 0usize) & 0x01; val != 0 } - #[doc = "Receive buffer not empty"] - pub fn set_rxne(&mut self, val: bool) { + #[doc = "Error interrupt enable"] + pub fn set_eie(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "Transmit buffer empty"] - pub const fn txe(&self) -> bool { + #[doc = "IrDA mode enable"] + pub const fn iren(&self) -> bool { let val = (self.0 >> 1usize) & 0x01; val != 0 } - #[doc = "Transmit buffer empty"] - pub fn set_txe(&mut self, val: bool) { + #[doc = "IrDA mode enable"] + pub fn set_iren(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - #[doc = "CRC error flag"] - pub const fn crcerr(&self) -> bool { + #[doc = "IrDA low-power"] + pub const fn irlp(&self) -> super::vals::Irlp { + let val = (self.0 >> 2usize) & 0x01; + super::vals::Irlp(val as u8) + } + #[doc = "IrDA low-power"] + pub fn set_irlp(&mut self, val: super::vals::Irlp) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); + } + #[doc = "Half-duplex selection"] + pub const fn hdsel(&self) -> super::vals::Hdsel { + let val = (self.0 >> 3usize) & 0x01; + super::vals::Hdsel(val as u8) + } + #[doc = "Half-duplex selection"] + pub fn set_hdsel(&mut self, val: super::vals::Hdsel) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); + } + #[doc = "Smartcard NACK enable"] + pub const fn nack(&self) -> bool { let val = (self.0 >> 4usize) & 0x01; val != 0 } - #[doc = "CRC error flag"] - pub fn set_crcerr(&mut self, val: bool) { + #[doc = "Smartcard NACK enable"] + pub fn set_nack(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); } - #[doc = "Mode fault"] - pub const fn modf(&self) -> bool { + #[doc = "Smartcard mode enable"] + pub const fn scen(&self) -> bool { let val = (self.0 >> 5usize) & 0x01; val != 0 } - #[doc = "Mode fault"] - pub fn set_modf(&mut self, val: bool) { + #[doc = "Smartcard mode enable"] + pub fn set_scen(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); } - #[doc = "Overrun flag"] - pub const fn ovr(&self) -> bool { + #[doc = "DMA enable receiver"] + pub const fn dmar(&self) -> bool { let val = (self.0 >> 6usize) & 0x01; val != 0 } - #[doc = "Overrun flag"] - pub fn set_ovr(&mut self, val: bool) { + #[doc = "DMA enable receiver"] + pub fn set_dmar(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - #[doc = "Busy flag"] - pub const fn bsy(&self) -> bool { + #[doc = "DMA enable transmitter"] + pub const fn dmat(&self) -> bool { let val = (self.0 >> 7usize) & 0x01; val != 0 } - #[doc = "Busy flag"] - pub fn set_bsy(&mut self, val: bool) { + #[doc = "DMA enable transmitter"] + pub fn set_dmat(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); } - #[doc = "TI frame format error"] - pub const fn fre(&self) -> bool { + #[doc = "RTS enable"] + pub const fn rtse(&self) -> bool { let val = (self.0 >> 8usize) & 0x01; val != 0 } - #[doc = "TI frame format error"] - pub fn set_fre(&mut self, val: bool) { + #[doc = "RTS enable"] + pub fn set_rtse(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); } - } - impl Default for Sr { - fn default() -> Sr { - Sr(0) + #[doc = "CTS enable"] + pub const fn ctse(&self) -> bool { + let val = (self.0 >> 9usize) & 0x01; + val != 0 } - } - #[doc = "control register 1"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr1(pub u32); - impl Cr1 { - #[doc = "Clock phase"] - pub const fn cpha(&self) -> super::vals::Cpha { - let val = (self.0 >> 0usize) & 0x01; - super::vals::Cpha(val as u8) + #[doc = "CTS enable"] + pub fn set_ctse(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); } - #[doc = "Clock phase"] - pub fn set_cpha(&mut self, val: super::vals::Cpha) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + #[doc = "CTS interrupt enable"] + pub const fn ctsie(&self) -> bool { + let val = (self.0 >> 10usize) & 0x01; + val != 0 } - #[doc = "Clock polarity"] - pub const fn cpol(&self) -> super::vals::Cpol { - let val = (self.0 >> 1usize) & 0x01; - super::vals::Cpol(val as u8) + #[doc = "CTS interrupt enable"] + pub fn set_ctsie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); } - #[doc = "Clock polarity"] - pub fn set_cpol(&mut self, val: super::vals::Cpol) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + #[doc = "One sample bit method enable"] + pub const fn onebit(&self) -> super::vals::Onebit { + let val = (self.0 >> 11usize) & 0x01; + super::vals::Onebit(val as u8) } - #[doc = "Master selection"] - pub const fn mstr(&self) -> super::vals::Mstr { - let val = (self.0 >> 2usize) & 0x01; - super::vals::Mstr(val as u8) + #[doc = "One sample bit method enable"] + pub fn set_onebit(&mut self, val: super::vals::Onebit) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); } - #[doc = "Master selection"] - pub fn set_mstr(&mut self, val: super::vals::Mstr) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); + #[doc = "Overrun Disable"] + pub const fn ovrdis(&self) -> super::vals::Ovrdis { + let val = (self.0 >> 12usize) & 0x01; + super::vals::Ovrdis(val as u8) } - #[doc = "Baud rate control"] - pub const fn br(&self) -> super::vals::Br { - let val = (self.0 >> 3usize) & 0x07; - super::vals::Br(val as u8) - } - #[doc = "Baud rate control"] - pub fn set_br(&mut self, val: super::vals::Br) { - self.0 = (self.0 & !(0x07 << 3usize)) | (((val.0 as u32) & 0x07) << 3usize); - } - #[doc = "SPI enable"] - pub const fn spe(&self) -> bool { - let val = (self.0 >> 6usize) & 0x01; - val != 0 - } - #[doc = "SPI enable"] - pub fn set_spe(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); - } - #[doc = "Frame format"] - pub const fn lsbfirst(&self) -> super::vals::Lsbfirst { - let val = (self.0 >> 7usize) & 0x01; - super::vals::Lsbfirst(val as u8) - } - #[doc = "Frame format"] - pub fn set_lsbfirst(&mut self, val: super::vals::Lsbfirst) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); - } - #[doc = "Internal slave select"] - pub const fn ssi(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; - val != 0 - } - #[doc = "Internal slave select"] - pub fn set_ssi(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); - } - #[doc = "Software slave management"] - pub const fn ssm(&self) -> bool { - let val = (self.0 >> 9usize) & 0x01; - val != 0 - } - #[doc = "Software slave management"] - pub fn set_ssm(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); - } - #[doc = "Receive only"] - pub const fn rxonly(&self) -> super::vals::Rxonly { - let val = (self.0 >> 10usize) & 0x01; - super::vals::Rxonly(val as u8) - } - #[doc = "Receive only"] - pub fn set_rxonly(&mut self, val: super::vals::Rxonly) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); - } - #[doc = "Data frame format"] - pub const fn dff(&self) -> super::vals::Dff { - let val = (self.0 >> 11usize) & 0x01; - super::vals::Dff(val as u8) - } - #[doc = "Data frame format"] - pub fn set_dff(&mut self, val: super::vals::Dff) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); - } - #[doc = "CRC transfer next"] - pub const fn crcnext(&self) -> super::vals::Crcnext { - let val = (self.0 >> 12usize) & 0x01; - super::vals::Crcnext(val as u8) - } - #[doc = "CRC transfer next"] - pub fn set_crcnext(&mut self, val: super::vals::Crcnext) { + #[doc = "Overrun Disable"] + pub fn set_ovrdis(&mut self, val: super::vals::Ovrdis) { self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); } - #[doc = "Hardware CRC calculation enable"] - pub const fn crcen(&self) -> bool { + #[doc = "DMA Disable on Reception Error"] + pub const fn ddre(&self) -> bool { let val = (self.0 >> 13usize) & 0x01; val != 0 } - #[doc = "Hardware CRC calculation enable"] - pub fn set_crcen(&mut self, val: bool) { + #[doc = "DMA Disable on Reception Error"] + pub fn set_ddre(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); } - #[doc = "Output enable in bidirectional mode"] - pub const fn bidioe(&self) -> super::vals::Bidioe { + #[doc = "Driver enable mode"] + pub const fn dem(&self) -> bool { let val = (self.0 >> 14usize) & 0x01; - super::vals::Bidioe(val as u8) + val != 0 } - #[doc = "Output enable in bidirectional mode"] - pub fn set_bidioe(&mut self, val: super::vals::Bidioe) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); + #[doc = "Driver enable mode"] + pub fn set_dem(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); } - #[doc = "Bidirectional data mode enable"] - pub const fn bidimode(&self) -> super::vals::Bidimode { + #[doc = "Driver enable polarity selection"] + pub const fn dep(&self) -> super::vals::Dep { let val = (self.0 >> 15usize) & 0x01; - super::vals::Bidimode(val as u8) + super::vals::Dep(val as u8) } - #[doc = "Bidirectional data mode enable"] - pub fn set_bidimode(&mut self, val: super::vals::Bidimode) { + #[doc = "Driver enable polarity selection"] + pub fn set_dep(&mut self, val: super::vals::Dep) { self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); } - } - impl Default for Cr1 { - fn default() -> Cr1 { - Cr1(0) + #[doc = "Smartcard auto-retry count"] + pub const fn scarcnt(&self) -> u8 { + let val = (self.0 >> 17usize) & 0x07; + val as u8 } - } - #[doc = "data register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Dr(pub u32); - impl Dr { - #[doc = "Data register"] - pub const fn dr(&self) -> u16 { - let val = (self.0 >> 0usize) & 0xffff; - val as u16 + #[doc = "Smartcard auto-retry count"] + pub fn set_scarcnt(&mut self, val: u8) { + self.0 = (self.0 & !(0x07 << 17usize)) | (((val as u32) & 0x07) << 17usize); } - #[doc = "Data register"] - pub fn set_dr(&mut self, val: u16) { - self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); + #[doc = "Wakeup from Stop mode interrupt flag selection"] + pub const fn wus(&self) -> super::vals::Wus { + let val = (self.0 >> 20usize) & 0x03; + super::vals::Wus(val as u8) } - } - impl Default for Dr { - fn default() -> Dr { - Dr(0) + #[doc = "Wakeup from Stop mode interrupt flag selection"] + pub fn set_wus(&mut self, val: super::vals::Wus) { + self.0 = (self.0 & !(0x03 << 20usize)) | (((val.0 as u32) & 0x03) << 20usize); } - } - #[doc = "TX CRC register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Txcrcr(pub u32); - impl Txcrcr { - #[doc = "Tx CRC register"] - pub const fn tx_crc(&self) -> u16 { - let val = (self.0 >> 0usize) & 0xffff; - val as u16 + #[doc = "Wakeup from Stop mode interrupt enable"] + pub const fn wufie(&self) -> bool { + let val = (self.0 >> 22usize) & 0x01; + val != 0 } - #[doc = "Tx CRC register"] - pub fn set_tx_crc(&mut self, val: u16) { - self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); + #[doc = "Wakeup from Stop mode interrupt enable"] + pub fn set_wufie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); } } - impl Default for Txcrcr { - fn default() -> Txcrcr { - Txcrcr(0) + impl Default for Cr3 { + fn default() -> Cr3 { + Cr3(0) } } - #[doc = "control register 2"] + #[doc = "Control register 1"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr2(pub u32); - impl Cr2 { - #[doc = "Rx buffer DMA enable"] - pub const fn rxdmaen(&self) -> bool { + pub struct Cr1(pub u32); + impl Cr1 { + #[doc = "USART enable"] + pub const fn ue(&self) -> bool { let val = (self.0 >> 0usize) & 0x01; val != 0 } - #[doc = "Rx buffer DMA enable"] - pub fn set_rxdmaen(&mut self, val: bool) { + #[doc = "USART enable"] + pub fn set_ue(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "Tx buffer DMA enable"] - pub const fn txdmaen(&self) -> bool { + #[doc = "USART enable in Stop mode"] + pub const fn uesm(&self) -> bool { let val = (self.0 >> 1usize) & 0x01; val != 0 } - #[doc = "Tx buffer DMA enable"] - pub fn set_txdmaen(&mut self, val: bool) { + #[doc = "USART enable in Stop mode"] + pub fn set_uesm(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - #[doc = "SS output enable"] - pub const fn ssoe(&self) -> bool { + #[doc = "Receiver enable"] + pub const fn re(&self) -> bool { let val = (self.0 >> 2usize) & 0x01; val != 0 } - #[doc = "SS output enable"] - pub fn set_ssoe(&mut self, val: bool) { + #[doc = "Receiver enable"] + pub fn set_re(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); } - #[doc = "Frame format"] - pub const fn frf(&self) -> super::vals::Frf { + #[doc = "Transmitter enable"] + pub const fn te(&self) -> bool { + let val = (self.0 >> 3usize) & 0x01; + val != 0 + } + #[doc = "Transmitter enable"] + pub fn set_te(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); + } + #[doc = "IDLE interrupt enable"] + pub const fn idleie(&self) -> bool { let val = (self.0 >> 4usize) & 0x01; - super::vals::Frf(val as u8) + val != 0 } - #[doc = "Frame format"] - pub fn set_frf(&mut self, val: super::vals::Frf) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + #[doc = "IDLE interrupt enable"] + pub fn set_idleie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); } - #[doc = "Error interrupt enable"] - pub const fn errie(&self) -> bool { + #[doc = "RXNE interrupt enable"] + pub const fn rxneie(&self) -> bool { let val = (self.0 >> 5usize) & 0x01; val != 0 } - #[doc = "Error interrupt enable"] - pub fn set_errie(&mut self, val: bool) { + #[doc = "RXNE interrupt enable"] + pub fn set_rxneie(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); } - #[doc = "RX buffer not empty interrupt enable"] - pub const fn rxneie(&self) -> bool { + #[doc = "Transmission complete interrupt enable"] + pub const fn tcie(&self) -> bool { let val = (self.0 >> 6usize) & 0x01; val != 0 } - #[doc = "RX buffer not empty interrupt enable"] - pub fn set_rxneie(&mut self, val: bool) { + #[doc = "Transmission complete interrupt enable"] + pub fn set_tcie(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - #[doc = "Tx buffer empty interrupt enable"] + #[doc = "interrupt enable"] pub const fn txeie(&self) -> bool { let val = (self.0 >> 7usize) & 0x01; val != 0 } - #[doc = "Tx buffer empty interrupt enable"] + #[doc = "interrupt enable"] pub fn set_txeie(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); } - } - impl Default for Cr2 { - fn default() -> Cr2 { - Cr2(0) + #[doc = "PE interrupt enable"] + pub const fn peie(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 } - } - #[doc = "CRC polynomial register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Crcpr(pub u32); - impl Crcpr { - #[doc = "CRC polynomial register"] - pub const fn crcpoly(&self) -> u16 { - let val = (self.0 >> 0usize) & 0xffff; - val as u16 + #[doc = "PE interrupt enable"] + pub fn set_peie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); } - #[doc = "CRC polynomial register"] - pub fn set_crcpoly(&mut self, val: u16) { - self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); + #[doc = "Parity selection"] + pub const fn ps(&self) -> super::vals::Ps { + let val = (self.0 >> 9usize) & 0x01; + super::vals::Ps(val as u8) } - } - impl Default for Crcpr { - fn default() -> Crcpr { - Crcpr(0) + #[doc = "Parity selection"] + pub fn set_ps(&mut self, val: super::vals::Ps) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + } + #[doc = "Parity control enable"] + pub const fn pce(&self) -> bool { + let val = (self.0 >> 10usize) & 0x01; + val != 0 + } + #[doc = "Parity control enable"] + pub fn set_pce(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); + } + #[doc = "Receiver wakeup method"] + pub const fn wake(&self) -> bool { + let val = (self.0 >> 11usize) & 0x01; + val != 0 + } + #[doc = "Receiver wakeup method"] + pub fn set_wake(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); + } + #[doc = "Word length"] + pub const fn m0(&self) -> super::vals::M0 { + let val = (self.0 >> 12usize) & 0x01; + super::vals::M0(val as u8) + } + #[doc = "Word length"] + pub fn set_m0(&mut self, val: super::vals::M0) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); + } + #[doc = "Word length"] + pub const fn m1(&self) -> super::vals::M1 { + let val = (self.0 >> 12usize) & 0x01; + super::vals::M1(val as u8) + } + #[doc = "Word length"] + pub fn set_m1(&mut self, val: super::vals::M1) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); + } + #[doc = "Mute mode enable"] + pub const fn mme(&self) -> bool { + let val = (self.0 >> 13usize) & 0x01; + val != 0 + } + #[doc = "Mute mode enable"] + pub fn set_mme(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); + } + #[doc = "Character match interrupt enable"] + pub const fn cmie(&self) -> bool { + let val = (self.0 >> 14usize) & 0x01; + val != 0 + } + #[doc = "Character match interrupt enable"] + pub fn set_cmie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); + } + #[doc = "Oversampling mode"] + pub fn over(&self, n: usize) -> super::vals::Over { + assert!(n < 1usize); + let offs = 15usize + n * 0usize; + let val = (self.0 >> offs) & 0x01; + super::vals::Over(val as u8) + } + #[doc = "Oversampling mode"] + pub fn set_over(&mut self, n: usize, val: super::vals::Over) { + assert!(n < 1usize); + let offs = 15usize + n * 0usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); + } + #[doc = "Driver Enable deassertion time"] + pub const fn dedt(&self) -> u8 { + let val = (self.0 >> 16usize) & 0x1f; + val as u8 + } + #[doc = "Driver Enable deassertion time"] + pub fn set_dedt(&mut self, val: u8) { + self.0 = (self.0 & !(0x1f << 16usize)) | (((val as u32) & 0x1f) << 16usize); + } + #[doc = "Driver Enable assertion time"] + pub const fn deat(&self) -> u8 { + let val = (self.0 >> 21usize) & 0x1f; + val as u8 + } + #[doc = "Driver Enable assertion time"] + pub fn set_deat(&mut self, val: u8) { + self.0 = (self.0 & !(0x1f << 21usize)) | (((val as u32) & 0x1f) << 21usize); + } + #[doc = "Receiver timeout interrupt enable"] + pub const fn rtoie(&self) -> bool { + let val = (self.0 >> 26usize) & 0x01; + val != 0 + } + #[doc = "Receiver timeout interrupt enable"] + pub fn set_rtoie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); + } + #[doc = "End of Block interrupt enable"] + pub const fn eobie(&self) -> bool { + let val = (self.0 >> 27usize) & 0x01; + val != 0 + } + #[doc = "End of Block interrupt enable"] + pub fn set_eobie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize); } } - } -} -pub mod timer_v1 { - use crate::generic::*; - #[doc = "General purpose 16-bit timer"] - #[derive(Copy, Clone)] - pub struct TimGp16(pub *mut u8); - unsafe impl Send for TimGp16 {} - unsafe impl Sync for TimGp16 {} - impl TimGp16 { - #[doc = "control register 1"] - pub fn cr1(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(0usize)) } - } - #[doc = "control register 2"] - pub fn cr2(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(4usize)) } + impl Default for Cr1 { + fn default() -> Cr1 { + Cr1(0) + } } - #[doc = "slave mode control register"] - pub fn smcr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(8usize)) } + #[doc = "Request register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Rqr(pub u32); + impl Rqr { + #[doc = "Auto baud rate request"] + pub const fn abrrq(&self) -> super::vals::Abrrq { + let val = (self.0 >> 0usize) & 0x01; + super::vals::Abrrq(val as u8) + } + #[doc = "Auto baud rate request"] + pub fn set_abrrq(&mut self, val: super::vals::Abrrq) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + } + #[doc = "Send break request"] + pub const fn sbkrq(&self) -> super::vals::Sbkrq { + let val = (self.0 >> 1usize) & 0x01; + super::vals::Sbkrq(val as u8) + } + #[doc = "Send break request"] + pub fn set_sbkrq(&mut self, val: super::vals::Sbkrq) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + } + #[doc = "Mute mode request"] + pub const fn mmrq(&self) -> super::vals::Mmrq { + let val = (self.0 >> 2usize) & 0x01; + super::vals::Mmrq(val as u8) + } + #[doc = "Mute mode request"] + pub fn set_mmrq(&mut self, val: super::vals::Mmrq) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); + } + #[doc = "Receive data flush request"] + pub const fn rxfrq(&self) -> super::vals::Rxfrq { + let val = (self.0 >> 3usize) & 0x01; + super::vals::Rxfrq(val as u8) + } + #[doc = "Receive data flush request"] + pub fn set_rxfrq(&mut self, val: super::vals::Rxfrq) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); + } + #[doc = "Transmit data flush request"] + pub const fn txfrq(&self) -> super::vals::Txfrq { + let val = (self.0 >> 4usize) & 0x01; + super::vals::Txfrq(val as u8) + } + #[doc = "Transmit data flush request"] + pub fn set_txfrq(&mut self, val: super::vals::Txfrq) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + } } - #[doc = "DMA/Interrupt enable register"] - pub fn dier(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(12usize)) } + impl Default for Rqr { + fn default() -> Rqr { + Rqr(0) + } } - #[doc = "status register"] - pub fn sr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(16usize)) } + #[doc = "Guard time and prescaler register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Gtpr(pub u32); + impl Gtpr { + #[doc = "Prescaler value"] + pub const fn psc(&self) -> u8 { + let val = (self.0 >> 0usize) & 0xff; + val as u8 + } + #[doc = "Prescaler value"] + pub fn set_psc(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize); + } + #[doc = "Guard time value"] + pub const fn gt(&self) -> u8 { + let val = (self.0 >> 8usize) & 0xff; + val as u8 + } + #[doc = "Guard time value"] + pub fn set_gt(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 8usize)) | (((val as u32) & 0xff) << 8usize); + } } - #[doc = "event generation register"] - pub fn egr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(20usize)) } + impl Default for Gtpr { + fn default() -> Gtpr { + Gtpr(0) + } } - #[doc = "capture/compare mode register 1 (input mode)"] - pub fn ccmr_input(self, n: usize) -> Reg { - assert!(n < 2usize); - unsafe { Reg::from_ptr(self.0.add(24usize + n * 4usize)) } + #[doc = "Data register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Dr(pub u32); + impl Dr { + #[doc = "data value"] + pub const fn dr(&self) -> u16 { + let val = (self.0 >> 0usize) & 0x01ff; + val as u16 + } + #[doc = "data value"] + pub fn set_dr(&mut self, val: u16) { + self.0 = (self.0 & !(0x01ff << 0usize)) | (((val as u32) & 0x01ff) << 0usize); + } } - #[doc = "capture/compare mode register 1 (output mode)"] - pub fn ccmr_output(self, n: usize) -> Reg { - assert!(n < 2usize); - unsafe { Reg::from_ptr(self.0.add(24usize + n * 4usize)) } + impl Default for Dr { + fn default() -> Dr { + Dr(0) + } } - #[doc = "capture/compare enable register"] - pub fn ccer(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(32usize)) } - } - #[doc = "counter"] - pub fn cnt(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(36usize)) } + #[doc = "Baud rate register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Brr(pub u32); + impl Brr { + #[doc = "mantissa of USARTDIV"] + pub const fn brr(&self) -> u16 { + let val = (self.0 >> 0usize) & 0xffff; + val as u16 + } + #[doc = "mantissa of USARTDIV"] + pub fn set_brr(&mut self, val: u16) { + self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); + } } - #[doc = "prescaler"] - pub fn psc(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(40usize)) } + impl Default for Brr { + fn default() -> Brr { + Brr(0) + } } - #[doc = "auto-reload register"] - pub fn arr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(44usize)) } + #[doc = "Control register 2"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Cr2(pub u32); + impl Cr2 { + #[doc = "7-bit Address Detection/4-bit Address Detection"] + pub fn addm(&self, n: usize) -> super::vals::Addm { + assert!(n < 1usize); + let offs = 4usize + n * 0usize; + let val = (self.0 >> offs) & 0x01; + super::vals::Addm(val as u8) + } + #[doc = "7-bit Address Detection/4-bit Address Detection"] + pub fn set_addm(&mut self, n: usize, val: super::vals::Addm) { + assert!(n < 1usize); + let offs = 4usize + n * 0usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); + } + #[doc = "LIN break detection length"] + pub const fn lbdl(&self) -> super::vals::Lbdl { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Lbdl(val as u8) + } + #[doc = "LIN break detection length"] + pub fn set_lbdl(&mut self, val: super::vals::Lbdl) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + } + #[doc = "LIN break detection interrupt enable"] + pub const fn lbdie(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 + } + #[doc = "LIN break detection interrupt enable"] + pub fn set_lbdie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + } + #[doc = "Last bit clock pulse"] + pub const fn lbcl(&self) -> super::vals::Lbcl { + let val = (self.0 >> 8usize) & 0x01; + super::vals::Lbcl(val as u8) + } + #[doc = "Last bit clock pulse"] + pub fn set_lbcl(&mut self, val: super::vals::Lbcl) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); + } + #[doc = "Clock phase"] + pub const fn cpha(&self) -> super::vals::Cpha { + let val = (self.0 >> 9usize) & 0x01; + super::vals::Cpha(val as u8) + } + #[doc = "Clock phase"] + pub fn set_cpha(&mut self, val: super::vals::Cpha) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + } + #[doc = "Clock polarity"] + pub const fn cpol(&self) -> super::vals::Cpol { + let val = (self.0 >> 10usize) & 0x01; + super::vals::Cpol(val as u8) + } + #[doc = "Clock polarity"] + pub fn set_cpol(&mut self, val: super::vals::Cpol) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); + } + #[doc = "Clock enable"] + pub const fn clken(&self) -> bool { + let val = (self.0 >> 11usize) & 0x01; + val != 0 + } + #[doc = "Clock enable"] + pub fn set_clken(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); + } + #[doc = "STOP bits"] + pub const fn stop(&self) -> super::vals::Stop { + let val = (self.0 >> 12usize) & 0x03; + super::vals::Stop(val as u8) + } + #[doc = "STOP bits"] + pub fn set_stop(&mut self, val: super::vals::Stop) { + self.0 = (self.0 & !(0x03 << 12usize)) | (((val.0 as u32) & 0x03) << 12usize); + } + #[doc = "LIN mode enable"] + pub const fn linen(&self) -> bool { + let val = (self.0 >> 14usize) & 0x01; + val != 0 + } + #[doc = "LIN mode enable"] + pub fn set_linen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); + } + #[doc = "Swap TX/RX pins"] + pub const fn swap(&self) -> super::vals::Swap { + let val = (self.0 >> 15usize) & 0x01; + super::vals::Swap(val as u8) + } + #[doc = "Swap TX/RX pins"] + pub fn set_swap(&mut self, val: super::vals::Swap) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + } + #[doc = "RX pin active level inversion"] + pub const fn rxinv(&self) -> super::vals::Rxinv { + let val = (self.0 >> 16usize) & 0x01; + super::vals::Rxinv(val as u8) + } + #[doc = "RX pin active level inversion"] + pub fn set_rxinv(&mut self, val: super::vals::Rxinv) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + } + #[doc = "TX pin active level inversion"] + pub const fn txinv(&self) -> super::vals::Txinv { + let val = (self.0 >> 17usize) & 0x01; + super::vals::Txinv(val as u8) + } + #[doc = "TX pin active level inversion"] + pub fn set_txinv(&mut self, val: super::vals::Txinv) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); + } + #[doc = "Binary data inversion"] + pub const fn datainv(&self) -> super::vals::Datainv { + let val = (self.0 >> 18usize) & 0x01; + super::vals::Datainv(val as u8) + } + #[doc = "Binary data inversion"] + pub fn set_datainv(&mut self, val: super::vals::Datainv) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); + } + #[doc = "Most significant bit first"] + pub const fn msbfirst(&self) -> super::vals::Msbfirst { + let val = (self.0 >> 19usize) & 0x01; + super::vals::Msbfirst(val as u8) + } + #[doc = "Most significant bit first"] + pub fn set_msbfirst(&mut self, val: super::vals::Msbfirst) { + self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); + } + #[doc = "Auto baud rate enable"] + pub const fn abren(&self) -> bool { + let val = (self.0 >> 20usize) & 0x01; + val != 0 + } + #[doc = "Auto baud rate enable"] + pub fn set_abren(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize); + } + #[doc = "Auto baud rate mode"] + pub const fn abrmod(&self) -> super::vals::Abrmod { + let val = (self.0 >> 21usize) & 0x03; + super::vals::Abrmod(val as u8) + } + #[doc = "Auto baud rate mode"] + pub fn set_abrmod(&mut self, val: super::vals::Abrmod) { + self.0 = (self.0 & !(0x03 << 21usize)) | (((val.0 as u32) & 0x03) << 21usize); + } + #[doc = "Receiver timeout enable"] + pub const fn rtoen(&self) -> bool { + let val = (self.0 >> 23usize) & 0x01; + val != 0 + } + #[doc = "Receiver timeout enable"] + pub fn set_rtoen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize); + } + #[doc = "Address of the USART node"] + pub const fn add(&self) -> u8 { + let val = (self.0 >> 24usize) & 0xff; + val as u8 + } + #[doc = "Address of the USART node"] + pub fn set_add(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 24usize)) | (((val as u32) & 0xff) << 24usize); + } } - #[doc = "capture/compare register"] - pub fn ccr(self, n: usize) -> Reg { - assert!(n < 4usize); - unsafe { Reg::from_ptr(self.0.add(52usize + n * 4usize)) } + impl Default for Cr2 { + fn default() -> Cr2 { + Cr2(0) + } } - #[doc = "DMA control register"] - pub fn dcr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(72usize)) } + #[doc = "Receiver timeout register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Rtor(pub u32); + impl Rtor { + #[doc = "Receiver timeout value"] + pub const fn rto(&self) -> u32 { + let val = (self.0 >> 0usize) & 0x00ff_ffff; + val as u32 + } + #[doc = "Receiver timeout value"] + pub fn set_rto(&mut self, val: u32) { + self.0 = + (self.0 & !(0x00ff_ffff << 0usize)) | (((val as u32) & 0x00ff_ffff) << 0usize); + } + #[doc = "Block Length"] + pub const fn blen(&self) -> u8 { + let val = (self.0 >> 24usize) & 0xff; + val as u8 + } + #[doc = "Block Length"] + pub fn set_blen(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 24usize)) | (((val as u32) & 0xff) << 24usize); + } } - #[doc = "DMA address for full transfer"] - pub fn dmar(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(76usize)) } + impl Default for Rtor { + fn default() -> Rtor { + Rtor(0) + } } } - #[doc = "Advanced-timers"] - #[derive(Copy, Clone)] - pub struct TimAdv(pub *mut u8); - unsafe impl Send for TimAdv {} - unsafe impl Sync for TimAdv {} - impl TimAdv { - #[doc = "control register 1"] - pub fn cr1(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(0usize)) } - } - #[doc = "control register 2"] - pub fn cr2(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(4usize)) } - } - #[doc = "slave mode control register"] - pub fn smcr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(8usize)) } + pub mod vals { + use crate::generic::*; + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Stop(pub u8); + impl Stop { + #[doc = "1 stop bit"] + pub const STOP1: Self = Self(0); + #[doc = "0.5 stop bit"] + pub const STOP0P5: Self = Self(0x01); + #[doc = "2 stop bit"] + pub const STOP2: Self = Self(0x02); + #[doc = "1.5 stop bit"] + pub const STOP1P5: Self = Self(0x03); } - #[doc = "DMA/Interrupt enable register"] - pub fn dier(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(12usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Sbkrq(pub u8); + impl Sbkrq { + #[doc = "sets the SBKF flag and request to send a BREAK on the line, as soon as the transmit machine is available"] + pub const BREAK: Self = Self(0x01); } - #[doc = "status register"] - pub fn sr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(16usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Txinv(pub u8); + impl Txinv { + #[doc = "TX pin signal works using the standard logic levels"] + pub const STANDARD: Self = Self(0); + #[doc = "TX pin signal values are inverted"] + pub const INVERTED: Self = Self(0x01); } - #[doc = "event generation register"] - pub fn egr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(20usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Cpol(pub u8); + impl Cpol { + #[doc = "Steady low value on CK pin outside transmission window"] + pub const LOW: Self = Self(0); + #[doc = "Steady high value on CK pin outside transmission window"] + pub const HIGH: Self = Self(0x01); } - #[doc = "capture/compare mode register 1 (input mode)"] - pub fn ccmr_input(self, n: usize) -> Reg { - assert!(n < 2usize); - unsafe { Reg::from_ptr(self.0.add(24usize + n * 4usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Onebit(pub u8); + impl Onebit { + #[doc = "Three sample bit method"] + pub const SAMPLE3: Self = Self(0); + #[doc = "One sample bit method"] + pub const SAMPLE1: Self = Self(0x01); } - #[doc = "capture/compare mode register 1 (output mode)"] - pub fn ccmr_output(self, n: usize) -> Reg { - assert!(n < 2usize); - unsafe { Reg::from_ptr(self.0.add(24usize + n * 4usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Irlp(pub u8); + impl Irlp { + #[doc = "Normal mode"] + pub const NORMAL: Self = Self(0); + #[doc = "Low-power mode"] + pub const LOWPOWER: Self = Self(0x01); } - #[doc = "capture/compare enable register"] - pub fn ccer(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(32usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Abrrq(pub u8); + impl Abrrq { + #[doc = "resets the ABRF flag in the USART_ISR and request an automatic baud rate measurement on the next received data frame"] + pub const REQUEST: Self = Self(0x01); } - #[doc = "counter"] - pub fn cnt(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(36usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Abrmod(pub u8); + impl Abrmod { + #[doc = "Measurement of the start bit is used to detect the baud rate"] + pub const START: Self = Self(0); + #[doc = "Falling edge to falling edge measurement"] + pub const EDGE: Self = Self(0x01); + #[doc = "0x7F frame detection"] + pub const FRAME7F: Self = Self(0x02); + #[doc = "0x55 frame detection"] + pub const FRAME55: Self = Self(0x03); } - #[doc = "prescaler"] - pub fn psc(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(40usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Ovrdis(pub u8); + impl Ovrdis { + #[doc = "Overrun Error Flag, ORE, is set when received data is not read before receiving new data"] + pub const ENABLED: Self = Self(0); + #[doc = "Overrun functionality is disabled. If new data is received while the RXNE flag is still set the ORE flag is not set and the new received data overwrites the previous content of the RDR register"] + pub const DISABLED: Self = Self(0x01); } - #[doc = "auto-reload register"] - pub fn arr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(44usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Ps(pub u8); + impl Ps { + #[doc = "Even parity"] + pub const EVEN: Self = Self(0); + #[doc = "Odd parity"] + pub const ODD: Self = Self(0x01); } - #[doc = "repetition counter register"] - pub fn rcr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(48usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Msbfirst(pub u8); + impl Msbfirst { + #[doc = "data is transmitted/received with data bit 0 first, following the start bit"] + pub const LSB: Self = Self(0); + #[doc = "data is transmitted/received with MSB (bit 7/8/9) first, following the start bit"] + pub const MSB: Self = Self(0x01); } - #[doc = "capture/compare register"] - pub fn ccr(self, n: usize) -> Reg { - assert!(n < 4usize); - unsafe { Reg::from_ptr(self.0.add(52usize + n * 4usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Wake(pub u8); + impl Wake { + #[doc = "Idle line"] + pub const IDLE: Self = Self(0); + #[doc = "Address mask"] + pub const ADDRESS: Self = Self(0x01); } - #[doc = "break and dead-time register"] - pub fn bdtr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(68usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Hdsel(pub u8); + impl Hdsel { + #[doc = "Half duplex mode is not selected"] + pub const NOTSELECTED: Self = Self(0); + #[doc = "Half duplex mode is selected"] + pub const SELECTED: Self = Self(0x01); } - #[doc = "DMA control register"] - pub fn dcr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(72usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Lbcl(pub u8); + impl Lbcl { + #[doc = "The clock pulse of the last data bit is not output to the CK pin"] + pub const NOTOUTPUT: Self = Self(0); + #[doc = "The clock pulse of the last data bit is output to the CK pin"] + pub const OUTPUT: Self = Self(0x01); } - #[doc = "DMA address for full transfer"] - pub fn dmar(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(76usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Mmrq(pub u8); + impl Mmrq { + #[doc = "Puts the USART in mute mode and sets the RWU flag"] + pub const MUTE: Self = Self(0x01); } - } - #[doc = "Basic timer"] - #[derive(Copy, Clone)] - pub struct TimBasic(pub *mut u8); - unsafe impl Send for TimBasic {} - unsafe impl Sync for TimBasic {} - impl TimBasic { - #[doc = "control register 1"] - pub fn cr1(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(0usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Datainv(pub u8); + impl Datainv { + #[doc = "Logical data from the data register are send/received in positive/direct logic"] + pub const POSITIVE: Self = Self(0); + #[doc = "Logical data from the data register are send/received in negative/inverse logic"] + pub const NEGATIVE: Self = Self(0x01); } - #[doc = "control register 2"] - pub fn cr2(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(4usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Rxfrq(pub u8); + impl Rxfrq { + #[doc = "clears the RXNE flag. This allows to discard the received data without reading it, and avoid an overrun condition"] + pub const DISCARD: Self = Self(0x01); } - #[doc = "DMA/Interrupt enable register"] - pub fn dier(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(12usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct M1(pub u8); + impl M1 { + #[doc = "Use M0 to set the data bits"] + pub const M0: Self = Self(0); + #[doc = "1 start bit, 7 data bits, n stop bits"] + pub const BIT7: Self = Self(0x01); } - #[doc = "status register"] - pub fn sr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(16usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Over(pub u8); + impl Over { + #[doc = "Oversampling by 16"] + pub const OVERSAMPLING16: Self = Self(0); + #[doc = "Oversampling by 8"] + pub const OVERSAMPLING8: Self = Self(0x01); } - #[doc = "event generation register"] - pub fn egr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(20usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Swap(pub u8); + impl Swap { + #[doc = "TX/RX pins are used as defined in standard pinout"] + pub const STANDARD: Self = Self(0); + #[doc = "The TX and RX pins functions are swapped"] + pub const SWAPPED: Self = Self(0x01); } - #[doc = "counter"] - pub fn cnt(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(36usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct M0(pub u8); + impl M0 { + #[doc = "1 start bit, 8 data bits, n stop bits"] + pub const BIT8: Self = Self(0); + #[doc = "1 start bit, 9 data bits, n stop bits"] + pub const BIT9: Self = Self(0x01); } - #[doc = "prescaler"] - pub fn psc(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(40usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Rxinv(pub u8); + impl Rxinv { + #[doc = "RX pin signal works using the standard logic levels"] + pub const STANDARD: Self = Self(0); + #[doc = "RX pin signal values are inverted"] + pub const INVERTED: Self = Self(0x01); } - #[doc = "auto-reload register"] - pub fn arr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(44usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Addm(pub u8); + impl Addm { + #[doc = "4-bit address detection"] + pub const BIT4: Self = Self(0); + #[doc = "7-bit address detection"] + pub const BIT7: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Ddre(pub u8); + impl Ddre { + #[doc = "DMA is not disabled in case of reception error"] + pub const NOTDISABLED: Self = Self(0); + #[doc = "DMA is disabled following a reception error"] + pub const DISABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Dep(pub u8); + impl Dep { + #[doc = "DE signal is active high"] + pub const HIGH: Self = Self(0); + #[doc = "DE signal is active low"] + pub const LOW: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Cpha(pub u8); + impl Cpha { + #[doc = "The first clock transition is the first data capture edge"] + pub const FIRST: Self = Self(0); + #[doc = "The second clock transition is the first data capture edge"] + pub const SECOND: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Txfrq(pub u8); + impl Txfrq { + #[doc = "Set the TXE flags. This allows to discard the transmit data"] + pub const DISCARD: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Wus(pub u8); + impl Wus { + #[doc = "WUF active on address match"] + pub const ADDRESS: Self = Self(0); + #[doc = "WuF active on Start bit detection"] + pub const START: Self = Self(0x02); + #[doc = "WUF active on RXNE"] + pub const RXNE: Self = Self(0x03); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Lbdl(pub u8); + impl Lbdl { + #[doc = "10-bit break detection"] + pub const BIT10: Self = Self(0); + #[doc = "11-bit break detection"] + pub const BIT11: Self = Self(0x01); } } - #[doc = "General purpose 32-bit timer"] +} +pub mod pwr_h7 { + use crate::generic::*; + #[doc = "PWR"] #[derive(Copy, Clone)] - pub struct TimGp32(pub *mut u8); - unsafe impl Send for TimGp32 {} - unsafe impl Sync for TimGp32 {} - impl TimGp32 { - #[doc = "control register 1"] - pub fn cr1(self) -> Reg { + pub struct Pwr(pub *mut u8); + unsafe impl Send for Pwr {} + unsafe impl Sync for Pwr {} + impl Pwr { + #[doc = "PWR control register 1"] + pub fn cr1(self) -> Reg { unsafe { Reg::from_ptr(self.0.add(0usize)) } } - #[doc = "control register 2"] - pub fn cr2(self) -> Reg { + #[doc = "PWR control status register 1"] + pub fn csr1(self) -> Reg { unsafe { Reg::from_ptr(self.0.add(4usize)) } } - #[doc = "slave mode control register"] - pub fn smcr(self) -> Reg { + #[doc = "This register is not reset by wakeup from Standby mode, RESET signal and VDD POR. It is only reset by VSW POR and VSWRST reset. This register shall not be accessed when VSWRST bit in RCC_BDCR register resets the VSW domain.After reset, PWR_CR2 register is write-protected. Prior to modifying its content, the DBP bit in PWR_CR1 register must be set to disable the write protection."] + pub fn cr2(self) -> Reg { unsafe { Reg::from_ptr(self.0.add(8usize)) } } - #[doc = "DMA/Interrupt enable register"] - pub fn dier(self) -> Reg { + #[doc = "Reset only by POR only, not reset by wakeup from Standby mode and RESET pad. The lower byte of this register is written once after POR and shall be written before changing VOS level or ck_sys clock frequency. No limitation applies to the upper bytes.Programming data corresponding to an invalid combination of SDLEVEL, SDEXTHP, SDEN, LDOEN and BYPASS bits (see Table9) will be ignored: data will not be written, the written-once mechanism will lock the register and any further write access will be ignored. The default supply configuration will be kept and the ACTVOSRDY bit in PWR control status register 1 (PWR_CSR1) will go on indicating invalid voltage levels. The system shall be power cycled before writing a new value."] + pub fn cr3(self) -> Reg { unsafe { Reg::from_ptr(self.0.add(12usize)) } } - #[doc = "status register"] - pub fn sr(self) -> Reg { + #[doc = "This register allows controlling CPU1 power."] + pub fn cpucr(self) -> Reg { unsafe { Reg::from_ptr(self.0.add(16usize)) } } - #[doc = "event generation register"] - pub fn egr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(20usize)) } - } - #[doc = "capture/compare mode register 1 (input mode)"] - pub fn ccmr_input(self, n: usize) -> Reg { - assert!(n < 2usize); - unsafe { Reg::from_ptr(self.0.add(24usize + n * 4usize)) } - } - #[doc = "capture/compare mode register 1 (output mode)"] - pub fn ccmr_output(self, n: usize) -> Reg { - assert!(n < 2usize); - unsafe { Reg::from_ptr(self.0.add(24usize + n * 4usize)) } + #[doc = "This register allows controlling D3 domain power.Following reset VOSRDY will be read 1 by software"] + pub fn d3cr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(24usize)) } } - #[doc = "capture/compare enable register"] - pub fn ccer(self) -> Reg { + #[doc = "reset only by system reset, not reset by wakeup from Standby mode5 wait states are required when writing this register (when clearing a WKUPF bit in PWR_WKUPFR, the AHB write access will complete after the WKUPF has been cleared)."] + pub fn wkupcr(self) -> Reg { unsafe { Reg::from_ptr(self.0.add(32usize)) } } - #[doc = "counter"] - pub fn cnt(self) -> Reg { + #[doc = "reset only by system reset, not reset by wakeup from Standby mode"] + pub fn wkupfr(self) -> Reg { unsafe { Reg::from_ptr(self.0.add(36usize)) } } - #[doc = "prescaler"] - pub fn psc(self) -> Reg { + #[doc = "Reset only by system reset, not reset by wakeup from Standby mode"] + pub fn wkupepr(self) -> Reg { unsafe { Reg::from_ptr(self.0.add(40usize)) } } - #[doc = "auto-reload register"] - pub fn arr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(44usize)) } - } - #[doc = "capture/compare register"] - pub fn ccr(self, n: usize) -> Reg { - assert!(n < 4usize); - unsafe { Reg::from_ptr(self.0.add(52usize + n * 4usize)) } - } - #[doc = "DMA control register"] - pub fn dcr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(72usize)) } - } - #[doc = "DMA address for full transfer"] - pub fn dmar(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(76usize)) } - } } - pub mod vals { + pub mod regs { use crate::generic::*; + #[doc = "This register allows controlling D3 domain power.Following reset VOSRDY will be read 1 by software"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Icf(pub u8); - impl Icf { - #[doc = "No filter, sampling is done at fDTS"] - pub const NOFILTER: Self = Self(0); - #[doc = "fSAMPLING=fCK_INT, N=2"] - pub const FCK_INT_N2: Self = Self(0x01); - #[doc = "fSAMPLING=fCK_INT, N=4"] - pub const FCK_INT_N4: Self = Self(0x02); - #[doc = "fSAMPLING=fCK_INT, N=8"] - pub const FCK_INT_N8: Self = Self(0x03); - #[doc = "fSAMPLING=fDTS/2, N=6"] - pub const FDTS_DIV2_N6: Self = Self(0x04); - #[doc = "fSAMPLING=fDTS/2, N=8"] - pub const FDTS_DIV2_N8: Self = Self(0x05); - #[doc = "fSAMPLING=fDTS/4, N=6"] - pub const FDTS_DIV4_N6: Self = Self(0x06); - #[doc = "fSAMPLING=fDTS/4, N=8"] - pub const FDTS_DIV4_N8: Self = Self(0x07); - #[doc = "fSAMPLING=fDTS/8, N=6"] - pub const FDTS_DIV8_N6: Self = Self(0x08); - #[doc = "fSAMPLING=fDTS/8, N=8"] - pub const FDTS_DIV8_N8: Self = Self(0x09); - #[doc = "fSAMPLING=fDTS/16, N=5"] - pub const FDTS_DIV16_N5: Self = Self(0x0a); - #[doc = "fSAMPLING=fDTS/16, N=6"] - pub const FDTS_DIV16_N6: Self = Self(0x0b); - #[doc = "fSAMPLING=fDTS/16, N=8"] - pub const FDTS_DIV16_N8: Self = Self(0x0c); - #[doc = "fSAMPLING=fDTS/32, N=5"] - pub const FDTS_DIV32_N5: Self = Self(0x0d); - #[doc = "fSAMPLING=fDTS/32, N=6"] - pub const FDTS_DIV32_N6: Self = Self(0x0e); - #[doc = "fSAMPLING=fDTS/32, N=8"] - pub const FDTS_DIV32_N8: Self = Self(0x0f); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ossi(pub u8); - impl Ossi { - #[doc = "When inactive, OC/OCN outputs are disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "When inactive, OC/OCN outputs are forced to idle level"] - pub const IDLELEVEL: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Mms(pub u8); - impl Mms { - #[doc = "The UG bit from the TIMx_EGR register is used as trigger output"] - pub const RESET: Self = Self(0); - #[doc = "The counter enable signal, CNT_EN, is used as trigger output"] - pub const ENABLE: Self = Self(0x01); - #[doc = "The update event is selected as trigger output"] - pub const UPDATE: Self = Self(0x02); - #[doc = "The trigger output send a positive pulse when the CC1IF flag it to be set, as soon as a capture or a compare match occurred"] - pub const COMPAREPULSE: Self = Self(0x03); - #[doc = "OC1REF signal is used as trigger output"] - pub const COMPAREOC1: Self = Self(0x04); - #[doc = "OC2REF signal is used as trigger output"] - pub const COMPAREOC2: Self = Self(0x05); - #[doc = "OC3REF signal is used as trigger output"] - pub const COMPAREOC3: Self = Self(0x06); - #[doc = "OC4REF signal is used as trigger output"] - pub const COMPAREOC4: Self = Self(0x07); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Tis(pub u8); - impl Tis { - #[doc = "The TIMx_CH1 pin is connected to TI1 input"] - pub const NORMAL: Self = Self(0); - #[doc = "The TIMx_CH1, CH2, CH3 pins are connected to TI1 input"] - pub const XOR: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct D3cr(pub u32); + impl D3cr { + #[doc = "VOS Ready bit for VCORE voltage scaling output selection. This bit is set to 1 by hardware when Bypass mode is selected in PWR control register 3 (PWR_CR3)."] + pub const fn vosrdy(&self) -> bool { + let val = (self.0 >> 13usize) & 0x01; + val != 0 + } + #[doc = "VOS Ready bit for VCORE voltage scaling output selection. This bit is set to 1 by hardware when Bypass mode is selected in PWR control register 3 (PWR_CR3)."] + pub fn set_vosrdy(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); + } + #[doc = "Voltage scaling selection according to performance These bits control the VCORE voltage level and allow to obtains the best trade-off between power consumption and performance: When increasing the performance, the voltage scaling shall be changed before increasing the system frequency. When decreasing performance, the system frequency shall first be decreased before changing the voltage scaling."] + pub const fn vos(&self) -> u8 { + let val = (self.0 >> 14usize) & 0x03; + val as u8 + } + #[doc = "Voltage scaling selection according to performance These bits control the VCORE voltage level and allow to obtains the best trade-off between power consumption and performance: When increasing the performance, the voltage scaling shall be changed before increasing the system frequency. When decreasing performance, the system frequency shall first be decreased before changing the voltage scaling."] + pub fn set_vos(&mut self, val: u8) { + self.0 = (self.0 & !(0x03 << 14usize)) | (((val as u32) & 0x03) << 14usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Arpe(pub u8); - impl Arpe { - #[doc = "TIMx_APRR register is not buffered"] - pub const DISABLED: Self = Self(0); - #[doc = "TIMx_APRR register is buffered"] - pub const ENABLED: Self = Self(0x01); + impl Default for D3cr { + fn default() -> D3cr { + D3cr(0) + } } + #[doc = "This register is not reset by wakeup from Standby mode, RESET signal and VDD POR. It is only reset by VSW POR and VSWRST reset. This register shall not be accessed when VSWRST bit in RCC_BDCR register resets the VSW domain.After reset, PWR_CR2 register is write-protected. Prior to modifying its content, the DBP bit in PWR_CR1 register must be set to disable the write protection."] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ocpe(pub u8); - impl Ocpe { - #[doc = "Preload register on CCR2 disabled. New values written to CCR2 are taken into account immediately"] - pub const DISABLED: Self = Self(0); - #[doc = "Preload register on CCR2 enabled. Preload value is loaded into active register on each update event"] - pub const ENABLED: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Cms(pub u8); - impl Cms { - #[doc = "The counter counts up or down depending on the direction bit"] - pub const EDGEALIGNED: Self = Self(0); - #[doc = "The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting down."] - pub const CENTERALIGNED1: Self = Self(0x01); - #[doc = "The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting up."] - pub const CENTERALIGNED2: Self = Self(0x02); - #[doc = "The counter counts up and down alternatively. Output compare interrupt flags are set both when the counter is counting up or down."] - pub const CENTERALIGNED3: Self = Self(0x03); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ossr(pub u8); - impl Ossr { - #[doc = "When inactive, OC/OCN outputs are disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "When inactive, OC/OCN outputs are enabled with their inactive level"] - pub const IDLELEVEL: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Dir(pub u8); - impl Dir { - #[doc = "Counter used as upcounter"] - pub const UP: Self = Self(0); - #[doc = "Counter used as downcounter"] - pub const DOWN: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Msm(pub u8); - impl Msm { - #[doc = "No action"] - pub const NOSYNC: Self = Self(0); - #[doc = "The effect of an event on the trigger input (TRGI) is delayed to allow a perfect synchronization between the current timer and its slaves (through TRGO). It is useful if we want to synchronize several timers on a single external event."] - pub const SYNC: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Urs(pub u8); - impl Urs { - #[doc = "Any of counter overflow/underflow, setting UG, or update through slave mode, generates an update interrupt or DMA request"] - pub const ANYEVENT: Self = Self(0); - #[doc = "Only counter overflow/underflow generates an update interrupt or DMA request"] - pub const COUNTERONLY: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Cr2(pub u32); + impl Cr2 { + #[doc = "Backup regulator enable When set, the Backup regulator (used to maintain the backup RAM content in Standby and VBAT modes) is enabled. If BREN is reset, the backup regulator is switched off. The backup RAM can still be used in Run and Stop modes. However, its content will be lost in Standby and VBAT modes. If BREN is set, the application must wait till the Backup Regulator Ready flag (BRRDY) is set to indicate that the data written into the SRAM will be maintained in Standby and VBAT modes."] + pub const fn bren(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 + } + #[doc = "Backup regulator enable When set, the Backup regulator (used to maintain the backup RAM content in Standby and VBAT modes) is enabled. If BREN is reset, the backup regulator is switched off. The backup RAM can still be used in Run and Stop modes. However, its content will be lost in Standby and VBAT modes. If BREN is set, the application must wait till the Backup Regulator Ready flag (BRRDY) is set to indicate that the data written into the SRAM will be maintained in Standby and VBAT modes."] + pub fn set_bren(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + } + #[doc = "VBAT and temperature monitoring enable When set, the VBAT supply and temperature monitoring is enabled."] + pub const fn monen(&self) -> bool { + let val = (self.0 >> 4usize) & 0x01; + val != 0 + } + #[doc = "VBAT and temperature monitoring enable When set, the VBAT supply and temperature monitoring is enabled."] + pub fn set_monen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); + } + #[doc = "Backup regulator ready This bit is set by hardware to indicate that the Backup regulator is ready."] + pub const fn brrdy(&self) -> bool { + let val = (self.0 >> 16usize) & 0x01; + val != 0 + } + #[doc = "Backup regulator ready This bit is set by hardware to indicate that the Backup regulator is ready."] + pub fn set_brrdy(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + } + #[doc = "VBAT level monitoring versus low threshold"] + pub const fn vbatl(&self) -> bool { + let val = (self.0 >> 20usize) & 0x01; + val != 0 + } + #[doc = "VBAT level monitoring versus low threshold"] + pub fn set_vbatl(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize); + } + #[doc = "VBAT level monitoring versus high threshold"] + pub const fn vbath(&self) -> bool { + let val = (self.0 >> 21usize) & 0x01; + val != 0 + } + #[doc = "VBAT level monitoring versus high threshold"] + pub fn set_vbath(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); + } + #[doc = "Temperature level monitoring versus low threshold"] + pub const fn templ(&self) -> bool { + let val = (self.0 >> 22usize) & 0x01; + val != 0 + } + #[doc = "Temperature level monitoring versus low threshold"] + pub fn set_templ(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); + } + #[doc = "Temperature level monitoring versus high threshold"] + pub const fn temph(&self) -> bool { + let val = (self.0 >> 23usize) & 0x01; + val != 0 + } + #[doc = "Temperature level monitoring versus high threshold"] + pub fn set_temph(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Etps(pub u8); - impl Etps { - #[doc = "Prescaler OFF"] - pub const DIV1: Self = Self(0); - #[doc = "ETRP frequency divided by 2"] - pub const DIV2: Self = Self(0x01); - #[doc = "ETRP frequency divided by 4"] - pub const DIV4: Self = Self(0x02); - #[doc = "ETRP frequency divided by 8"] - pub const DIV8: Self = Self(0x03); + impl Default for Cr2 { + fn default() -> Cr2 { + Cr2(0) + } } + #[doc = "This register allows controlling CPU1 power."] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ocm(pub u8); - impl Ocm { - #[doc = "The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs"] - pub const FROZEN: Self = Self(0); - #[doc = "Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register"] - pub const ACTIVEONMATCH: Self = Self(0x01); - #[doc = "Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register"] - pub const INACTIVEONMATCH: Self = Self(0x02); - #[doc = "OCyREF toggles when TIMx_CNT=TIMx_CCRy"] - pub const TOGGLE: Self = Self(0x03); - #[doc = "OCyREF is forced low"] - pub const FORCEINACTIVE: Self = Self(0x04); - #[doc = "OCyREF is forced high"] - pub const FORCEACTIVE: Self = Self(0x05); - #[doc = "In upcounting, channel is active as long as TIMx_CNTTIMx_CCRy else active"] - pub const PWMMODE1: Self = Self(0x06); - #[doc = "Inversely to PwmMode1"] - pub const PWMMODE2: Self = Self(0x07); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Cpucr(pub u32); + impl Cpucr { + #[doc = "D1 domain Power Down Deepsleep selection. This bit allows CPU1 to define the Deepsleep mode for D1 domain."] + pub const fn pdds_d1(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 + } + #[doc = "D1 domain Power Down Deepsleep selection. This bit allows CPU1 to define the Deepsleep mode for D1 domain."] + pub fn set_pdds_d1(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + } + #[doc = "D2 domain Power Down Deepsleep. This bit allows CPU1 to define the Deepsleep mode for D2 domain."] + pub const fn pdds_d2(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; + val != 0 + } + #[doc = "D2 domain Power Down Deepsleep. This bit allows CPU1 to define the Deepsleep mode for D2 domain."] + pub fn set_pdds_d2(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + } + #[doc = "System D3 domain Power Down Deepsleep. This bit allows CPU1 to define the Deepsleep mode for System D3 domain."] + pub const fn pdds_d3(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; + val != 0 + } + #[doc = "System D3 domain Power Down Deepsleep. This bit allows CPU1 to define the Deepsleep mode for System D3 domain."] + pub fn set_pdds_d3(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); + } + #[doc = "STOP flag This bit is set by hardware and cleared only by any reset or by setting the CPU1 CSSF bit."] + pub const fn stopf(&self) -> bool { + let val = (self.0 >> 5usize) & 0x01; + val != 0 + } + #[doc = "STOP flag This bit is set by hardware and cleared only by any reset or by setting the CPU1 CSSF bit."] + pub fn set_stopf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); + } + #[doc = "System Standby flag This bit is set by hardware and cleared only by a POR (Power-on Reset) or by setting the CPU1 CSSF bit"] + pub const fn sbf(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 + } + #[doc = "System Standby flag This bit is set by hardware and cleared only by a POR (Power-on Reset) or by setting the CPU1 CSSF bit"] + pub fn set_sbf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + } + #[doc = "D1 domain DStandby flag This bit is set by hardware and cleared by any system reset or by setting the CPU1 CSSF bit. Once set, this bit can be cleared only when the D1 domain is no longer in DStandby mode."] + pub const fn sbf_d1(&self) -> bool { + let val = (self.0 >> 7usize) & 0x01; + val != 0 + } + #[doc = "D1 domain DStandby flag This bit is set by hardware and cleared by any system reset or by setting the CPU1 CSSF bit. Once set, this bit can be cleared only when the D1 domain is no longer in DStandby mode."] + pub fn set_sbf_d1(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + } + #[doc = "D2 domain DStandby flag This bit is set by hardware and cleared by any system reset or by setting the CPU1 CSSF bit. Once set, this bit can be cleared only when the D2 domain is no longer in DStandby mode."] + pub const fn sbf_d2(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 + } + #[doc = "D2 domain DStandby flag This bit is set by hardware and cleared by any system reset or by setting the CPU1 CSSF bit. Once set, this bit can be cleared only when the D2 domain is no longer in DStandby mode."] + pub fn set_sbf_d2(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + } + #[doc = "Clear D1 domain CPU1 Standby, Stop and HOLD flags (always read as 0) This bit is cleared to 0 by hardware."] + pub const fn cssf(&self) -> bool { + let val = (self.0 >> 9usize) & 0x01; + val != 0 + } + #[doc = "Clear D1 domain CPU1 Standby, Stop and HOLD flags (always read as 0) This bit is cleared to 0 by hardware."] + pub fn set_cssf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + } + #[doc = "Keep system D3 domain in Run mode regardless of the CPU sub-systems modes"] + pub const fn run_d3(&self) -> bool { + let val = (self.0 >> 11usize) & 0x01; + val != 0 + } + #[doc = "Keep system D3 domain in Run mode regardless of the CPU sub-systems modes"] + pub fn set_run_d3(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct CcmrInputCcs(pub u8); - impl CcmrInputCcs { - #[doc = "CCx channel is configured as input, normal mapping: ICx mapped to TIx"] - pub const TI4: Self = Self(0x01); - #[doc = "CCx channel is configured as input, alternate mapping (switches 1 with 2, 3 with 4)"] - pub const TI3: Self = Self(0x02); - #[doc = "CCx channel is configured as input, ICx is mapped on TRC"] - pub const TRC: Self = Self(0x03); + impl Default for Cpucr { + fn default() -> Cpucr { + Cpucr(0) + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Etf(pub u8); - impl Etf { - #[doc = "No filter, sampling is done at fDTS"] - pub const NOFILTER: Self = Self(0); - #[doc = "fSAMPLING=fCK_INT, N=2"] - pub const FCK_INT_N2: Self = Self(0x01); - #[doc = "fSAMPLING=fCK_INT, N=4"] - pub const FCK_INT_N4: Self = Self(0x02); - #[doc = "fSAMPLING=fCK_INT, N=8"] - pub const FCK_INT_N8: Self = Self(0x03); - #[doc = "fSAMPLING=fDTS/2, N=6"] - pub const FDTS_DIV2_N6: Self = Self(0x04); - #[doc = "fSAMPLING=fDTS/2, N=8"] - pub const FDTS_DIV2_N8: Self = Self(0x05); - #[doc = "fSAMPLING=fDTS/4, N=6"] - pub const FDTS_DIV4_N6: Self = Self(0x06); - #[doc = "fSAMPLING=fDTS/4, N=8"] - pub const FDTS_DIV4_N8: Self = Self(0x07); - #[doc = "fSAMPLING=fDTS/8, N=6"] - pub const FDTS_DIV8_N6: Self = Self(0x08); - #[doc = "fSAMPLING=fDTS/8, N=8"] - pub const FDTS_DIV8_N8: Self = Self(0x09); - #[doc = "fSAMPLING=fDTS/16, N=5"] - pub const FDTS_DIV16_N5: Self = Self(0x0a); - #[doc = "fSAMPLING=fDTS/16, N=6"] - pub const FDTS_DIV16_N6: Self = Self(0x0b); - #[doc = "fSAMPLING=fDTS/16, N=8"] - pub const FDTS_DIV16_N8: Self = Self(0x0c); - #[doc = "fSAMPLING=fDTS/32, N=5"] - pub const FDTS_DIV32_N5: Self = Self(0x0d); - #[doc = "fSAMPLING=fDTS/32, N=6"] - pub const FDTS_DIV32_N6: Self = Self(0x0e); - #[doc = "fSAMPLING=fDTS/32, N=8"] - pub const FDTS_DIV32_N8: Self = Self(0x0f); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ece(pub u8); - impl Ece { - #[doc = "External clock mode 2 disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "External clock mode 2 enabled. The counter is clocked by any active edge on the ETRF signal."] - pub const ENABLED: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Sms(pub u8); - impl Sms { - #[doc = "Slave mode disabled - if CEN = ‘1 then the prescaler is clocked directly by the internal clock."] - pub const DISABLED: Self = Self(0); - #[doc = "Encoder mode 1 - Counter counts up/down on TI2FP1 edge depending on TI1FP2 level."] - pub const ENCODER_MODE_1: Self = Self(0x01); - #[doc = "Encoder mode 2 - Counter counts up/down on TI1FP2 edge depending on TI2FP1 level."] - pub const ENCODER_MODE_2: Self = Self(0x02); - #[doc = "Encoder mode 3 - Counter counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input."] - pub const ENCODER_MODE_3: Self = Self(0x03); - #[doc = "Reset Mode - Rising edge of the selected trigger input (TRGI) reinitializes the counter and generates an update of the registers."] - pub const RESET_MODE: Self = Self(0x04); - #[doc = "Gated Mode - The counter clock is enabled when the trigger input (TRGI) is high. The counter stops (but is not reset) as soon as the trigger becomes low. Both start and stop of the counter are controlled."] - pub const GATED_MODE: Self = Self(0x05); - #[doc = "Trigger Mode - The counter starts at a rising edge of the trigger TRGI (but it is not reset). Only the start of the counter is controlled."] - pub const TRIGGER_MODE: Self = Self(0x06); - #[doc = "External Clock Mode 1 - Rising edges of the selected trigger (TRGI) clock the counter."] - pub const EXT_CLOCK_MODE: Self = Self(0x07); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Etp(pub u8); - impl Etp { - #[doc = "ETR is noninverted, active at high level or rising edge"] - pub const NOTINVERTED: Self = Self(0); - #[doc = "ETR is inverted, active at low level or falling edge"] - pub const INVERTED: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Opm(pub u8); - impl Opm { - #[doc = "Counter is not stopped at update event"] - pub const DISABLED: Self = Self(0); - #[doc = "Counter stops counting at the next update event (clearing the CEN bit)"] - pub const ENABLED: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct CcmrOutputCcs(pub u8); - impl CcmrOutputCcs { - #[doc = "CCx channel is configured as output"] - pub const OUTPUT: Self = Self(0); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ccds(pub u8); - impl Ccds { - #[doc = "CCx DMA request sent when CCx event occurs"] - pub const ONCOMPARE: Self = Self(0); - #[doc = "CCx DMA request sent when update event occurs"] - pub const ONUPDATE: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ts(pub u8); - impl Ts { - #[doc = "Internal Trigger 0 (ITR0)"] - pub const ITR0: Self = Self(0); - #[doc = "Internal Trigger 1 (ITR1)"] - pub const ITR1: Self = Self(0x01); - #[doc = "Internal Trigger 2 (ITR2)"] - pub const ITR2: Self = Self(0x02); - #[doc = "TI1 Edge Detector (TI1F_ED)"] - pub const TI1F_ED: Self = Self(0x04); - #[doc = "Filtered Timer Input 1 (TI1FP1)"] - pub const TI1FP1: Self = Self(0x05); - #[doc = "Filtered Timer Input 2 (TI2FP2)"] - pub const TI2FP2: Self = Self(0x06); - #[doc = "External Trigger input (ETRF)"] - pub const ETRF: Self = Self(0x07); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ckd(pub u8); - impl Ckd { - #[doc = "t_DTS = t_CK_INT"] - pub const DIV1: Self = Self(0); - #[doc = "t_DTS = 2 × t_CK_INT"] - pub const DIV2: Self = Self(0x01); - #[doc = "t_DTS = 4 × t_CK_INT"] - pub const DIV4: Self = Self(0x02); - } - } - pub mod regs { - use crate::generic::*; - #[doc = "prescaler"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Psc(pub u32); - impl Psc { - #[doc = "Prescaler value"] - pub const fn psc(&self) -> u16 { - let val = (self.0 >> 0usize) & 0xffff; - val as u16 - } - #[doc = "Prescaler value"] - pub fn set_psc(&mut self, val: u16) { - self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); - } - } - impl Default for Psc { - fn default() -> Psc { - Psc(0) - } - } - #[doc = "counter"] + #[doc = "PWR control register 1"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cnt16(pub u32); - impl Cnt16 { - #[doc = "counter value"] - pub const fn cnt(&self) -> u16 { - let val = (self.0 >> 0usize) & 0xffff; - val as u16 + pub struct Cr1(pub u32); + impl Cr1 { + #[doc = "Low-power Deepsleep with SVOS3 (SVOS4 and SVOS5 always use low-power, regardless of the setting of this bit)"] + pub const fn lpds(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 } - #[doc = "counter value"] - pub fn set_cnt(&mut self, val: u16) { - self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); + #[doc = "Low-power Deepsleep with SVOS3 (SVOS4 and SVOS5 always use low-power, regardless of the setting of this bit)"] + pub fn set_lpds(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - } - impl Default for Cnt16 { - fn default() -> Cnt16 { - Cnt16(0) + #[doc = "Programmable voltage detector enable"] + pub const fn pvde(&self) -> bool { + let val = (self.0 >> 4usize) & 0x01; + val != 0 } - } - #[doc = "auto-reload register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Arr32(pub u32); - impl Arr32 { - #[doc = "Auto-reload value"] - pub const fn arr(&self) -> u32 { - let val = (self.0 >> 0usize) & 0xffff_ffff; - val as u32 + #[doc = "Programmable voltage detector enable"] + pub fn set_pvde(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); } - #[doc = "Auto-reload value"] - pub fn set_arr(&mut self, val: u32) { - self.0 = - (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + #[doc = "Programmable voltage detector level selection These bits select the voltage threshold detected by the PVD. Note: Refer to Section Electrical characteristics of the product datasheet for more details."] + pub const fn pls(&self) -> u8 { + let val = (self.0 >> 5usize) & 0x07; + val as u8 } - } - impl Default for Arr32 { - fn default() -> Arr32 { - Arr32(0) + #[doc = "Programmable voltage detector level selection These bits select the voltage threshold detected by the PVD. Note: Refer to Section Electrical characteristics of the product datasheet for more details."] + pub fn set_pls(&mut self, val: u8) { + self.0 = (self.0 & !(0x07 << 5usize)) | (((val as u32) & 0x07) << 5usize); } - } - #[doc = "control register 2"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr2Adv(pub u32); - impl Cr2Adv { - #[doc = "Capture/compare preloaded control"] - pub const fn ccpc(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; + #[doc = "Disable backup domain write protection In reset state, the RCC_BDCR register, the RTC registers (including the backup registers), BREN and MOEN bits in PWR_CR2 register, are protected against parasitic write access. This bit must be set to enable write access to these registers."] + pub const fn dbp(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; val != 0 } - #[doc = "Capture/compare preloaded control"] - pub fn set_ccpc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + #[doc = "Disable backup domain write protection In reset state, the RCC_BDCR register, the RTC registers (including the backup registers), BREN and MOEN bits in PWR_CR2 register, are protected against parasitic write access. This bit must be set to enable write access to these registers."] + pub fn set_dbp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); } - #[doc = "Capture/compare control update selection"] - pub const fn ccus(&self) -> bool { - let val = (self.0 >> 2usize) & 0x01; + #[doc = "Flash low-power mode in DStop mode This bit allows to obtain the best trade-off between low-power consumption and restart time when exiting from DStop mode. When it is set, the Flash memory enters low-power mode when D1 domain is in DStop mode."] + pub const fn flps(&self) -> bool { + let val = (self.0 >> 9usize) & 0x01; val != 0 } - #[doc = "Capture/compare control update selection"] - pub fn set_ccus(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); + #[doc = "Flash low-power mode in DStop mode This bit allows to obtain the best trade-off between low-power consumption and restart time when exiting from DStop mode. When it is set, the Flash memory enters low-power mode when D1 domain is in DStop mode."] + pub fn set_flps(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); } - #[doc = "Capture/compare DMA selection"] - pub const fn ccds(&self) -> super::vals::Ccds { - let val = (self.0 >> 3usize) & 0x01; - super::vals::Ccds(val as u8) + #[doc = "System Stop mode voltage scaling selection These bits control the VCORE voltage level in system Stop mode, to obtain the best trade-off between power consumption and performance."] + pub const fn svos(&self) -> u8 { + let val = (self.0 >> 14usize) & 0x03; + val as u8 } - #[doc = "Capture/compare DMA selection"] - pub fn set_ccds(&mut self, val: super::vals::Ccds) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); + #[doc = "System Stop mode voltage scaling selection These bits control the VCORE voltage level in system Stop mode, to obtain the best trade-off between power consumption and performance."] + pub fn set_svos(&mut self, val: u8) { + self.0 = (self.0 & !(0x03 << 14usize)) | (((val as u32) & 0x03) << 14usize); } - #[doc = "Master mode selection"] - pub const fn mms(&self) -> super::vals::Mms { - let val = (self.0 >> 4usize) & 0x07; - super::vals::Mms(val as u8) + #[doc = "Peripheral voltage monitor on VDDA enable"] + pub const fn avden(&self) -> bool { + let val = (self.0 >> 16usize) & 0x01; + val != 0 } - #[doc = "Master mode selection"] - pub fn set_mms(&mut self, val: super::vals::Mms) { - self.0 = (self.0 & !(0x07 << 4usize)) | (((val.0 as u32) & 0x07) << 4usize); + #[doc = "Peripheral voltage monitor on VDDA enable"] + pub fn set_avden(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); } - #[doc = "TI1 selection"] - pub const fn ti1s(&self) -> super::vals::Tis { - let val = (self.0 >> 7usize) & 0x01; - super::vals::Tis(val as u8) + #[doc = "Analog voltage detector level selection These bits select the voltage threshold detected by the AVD."] + pub const fn als(&self) -> u8 { + let val = (self.0 >> 17usize) & 0x03; + val as u8 } - #[doc = "TI1 selection"] - pub fn set_ti1s(&mut self, val: super::vals::Tis) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); + #[doc = "Analog voltage detector level selection These bits select the voltage threshold detected by the AVD."] + pub fn set_als(&mut self, val: u8) { + self.0 = (self.0 & !(0x03 << 17usize)) | (((val as u32) & 0x03) << 17usize); } - #[doc = "Output Idle state 1"] - pub fn ois(&self, n: usize) -> bool { - assert!(n < 4usize); - let offs = 8usize + n * 2usize; + } + impl Default for Cr1 { + fn default() -> Cr1 { + Cr1(0) + } + } + #[doc = "Reset only by system reset, not reset by wakeup from Standby mode"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Wkupepr(pub u32); + impl Wkupepr { + #[doc = "Enable Wakeup Pin WKUPn+1 Each bit is set and cleared by software. Note: An additional wakeup event is detected if WKUPn+1 pin is enabled (by setting the WKUPENn+1 bit) when WKUPn+1 pin level is already high when WKUPPn+1 selects rising edge, or low when WKUPPn+1 selects falling edge."] + pub fn wkupen(&self, n: usize) -> bool { + assert!(n < 6usize); + let offs = 0usize + n * 1usize; let val = (self.0 >> offs) & 0x01; val != 0 } - #[doc = "Output Idle state 1"] - pub fn set_ois(&mut self, n: usize, val: bool) { - assert!(n < 4usize); - let offs = 8usize + n * 2usize; + #[doc = "Enable Wakeup Pin WKUPn+1 Each bit is set and cleared by software. Note: An additional wakeup event is detected if WKUPn+1 pin is enabled (by setting the WKUPENn+1 bit) when WKUPn+1 pin level is already high when WKUPPn+1 selects rising edge, or low when WKUPPn+1 selects falling edge."] + pub fn set_wkupen(&mut self, n: usize, val: bool) { + assert!(n < 6usize); + let offs = 0usize + n * 1usize; self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "Output Idle state 1"] - pub const fn ois1n(&self) -> bool { - let val = (self.0 >> 9usize) & 0x01; + #[doc = "Wakeup pin polarity bit for WKUPn-7 These bits define the polarity used for event detection on WKUPn-7 external wakeup pin."] + pub fn wkupp(&self, n: usize) -> bool { + assert!(n < 6usize); + let offs = 8usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; val != 0 } - #[doc = "Output Idle state 1"] - pub fn set_ois1n(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + #[doc = "Wakeup pin polarity bit for WKUPn-7 These bits define the polarity used for event detection on WKUPn-7 external wakeup pin."] + pub fn set_wkupp(&mut self, n: usize, val: bool) { + assert!(n < 6usize); + let offs = 8usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "Output Idle state 2"] - pub const fn ois2n(&self) -> bool { - let val = (self.0 >> 11usize) & 0x01; - val != 0 + #[doc = "Wakeup pin pull configuration"] + pub fn wkuppupd(&self, n: usize) -> u8 { + assert!(n < 6usize); + let offs = 16usize + n * 2usize; + let val = (self.0 >> offs) & 0x03; + val as u8 } - #[doc = "Output Idle state 2"] - pub fn set_ois2n(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); + #[doc = "Wakeup pin pull configuration"] + pub fn set_wkuppupd(&mut self, n: usize, val: u8) { + assert!(n < 6usize); + let offs = 16usize + n * 2usize; + self.0 = (self.0 & !(0x03 << offs)) | (((val as u32) & 0x03) << offs); } - #[doc = "Output Idle state 3"] - pub const fn ois3n(&self) -> bool { - let val = (self.0 >> 13usize) & 0x01; + } + impl Default for Wkupepr { + fn default() -> Wkupepr { + Wkupepr(0) + } + } + #[doc = "reset only by system reset, not reset by wakeup from Standby mode"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Wkupfr(pub u32); + impl Wkupfr { + #[doc = "Wakeup pin WKUPF flag. This bit is set by hardware and cleared only by a Reset pin or by setting the WKUPCn+1 bit in the PWR wakeup clear register (PWR_WKUPCR)."] + pub fn wkupf(&self, n: usize) -> bool { + assert!(n < 6usize); + let offs = 0usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; val != 0 } - #[doc = "Output Idle state 3"] - pub fn set_ois3n(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); + #[doc = "Wakeup pin WKUPF flag. This bit is set by hardware and cleared only by a Reset pin or by setting the WKUPCn+1 bit in the PWR wakeup clear register (PWR_WKUPCR)."] + pub fn set_wkupf(&mut self, n: usize, val: bool) { + assert!(n < 6usize); + let offs = 0usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } } - impl Default for Cr2Adv { - fn default() -> Cr2Adv { - Cr2Adv(0) + impl Default for Wkupfr { + fn default() -> Wkupfr { + Wkupfr(0) } } - #[doc = "DMA/Interrupt enable register"] + #[doc = "Reset only by POR only, not reset by wakeup from Standby mode and RESET pad. The lower byte of this register is written once after POR and shall be written before changing VOS level or ck_sys clock frequency. No limitation applies to the upper bytes.Programming data corresponding to an invalid combination of SDLEVEL, SDEXTHP, SDEN, LDOEN and BYPASS bits (see Table9) will be ignored: data will not be written, the written-once mechanism will lock the register and any further write access will be ignored. The default supply configuration will be kept and the ACTVOSRDY bit in PWR control status register 1 (PWR_CSR1) will go on indicating invalid voltage levels. The system shall be power cycled before writing a new value."] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct DierBasic(pub u32); - impl DierBasic { - #[doc = "Update interrupt enable"] - pub const fn uie(&self) -> bool { + pub struct Cr3(pub u32); + impl Cr3 { + #[doc = "Power management unit bypass"] + pub const fn bypass(&self) -> bool { let val = (self.0 >> 0usize) & 0x01; val != 0 } - #[doc = "Update interrupt enable"] - pub fn set_uie(&mut self, val: bool) { + #[doc = "Power management unit bypass"] + pub fn set_bypass(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "Update DMA request enable"] - pub const fn ude(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; + #[doc = "Low drop-out regulator enable"] + pub const fn ldoen(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; val != 0 } - #[doc = "Update DMA request enable"] - pub fn set_ude(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + #[doc = "Low drop-out regulator enable"] + pub fn set_ldoen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - } - impl Default for DierBasic { - fn default() -> DierBasic { - DierBasic(0) + #[doc = "SD converter Enable"] + pub const fn scuen(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; + val != 0 } - } - #[doc = "event generation register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct EgrAdv(pub u32); - impl EgrAdv { - #[doc = "Update generation"] - pub const fn ug(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; + #[doc = "SD converter Enable"] + pub fn set_scuen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); + } + #[doc = "VBAT charging enable"] + pub const fn vbe(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; val != 0 } - #[doc = "Update generation"] - pub fn set_ug(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + #[doc = "VBAT charging enable"] + pub fn set_vbe(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); } - #[doc = "Capture/compare 1 generation"] - pub fn ccg(&self, n: usize) -> bool { - assert!(n < 4usize); - let offs = 1usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; + #[doc = "VBAT charging resistor selection"] + pub const fn vbrs(&self) -> bool { + let val = (self.0 >> 9usize) & 0x01; val != 0 } - #[doc = "Capture/compare 1 generation"] - pub fn set_ccg(&mut self, n: usize, val: bool) { - assert!(n < 4usize); - let offs = 1usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + #[doc = "VBAT charging resistor selection"] + pub fn set_vbrs(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); } - #[doc = "Capture/Compare control update generation"] - pub const fn comg(&self) -> bool { - let val = (self.0 >> 5usize) & 0x01; + #[doc = "VDD33USB voltage level detector enable."] + pub const fn usb33den(&self) -> bool { + let val = (self.0 >> 24usize) & 0x01; val != 0 } - #[doc = "Capture/Compare control update generation"] - pub fn set_comg(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); + #[doc = "VDD33USB voltage level detector enable."] + pub fn set_usb33den(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize); } - #[doc = "Trigger generation"] - pub const fn tg(&self) -> bool { - let val = (self.0 >> 6usize) & 0x01; + #[doc = "USB regulator enable."] + pub const fn usbregen(&self) -> bool { + let val = (self.0 >> 25usize) & 0x01; val != 0 } - #[doc = "Trigger generation"] - pub fn set_tg(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + #[doc = "USB regulator enable."] + pub fn set_usbregen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize); } - #[doc = "Break generation"] - pub const fn bg(&self) -> bool { - let val = (self.0 >> 7usize) & 0x01; + #[doc = "USB supply ready."] + pub const fn usb33rdy(&self) -> bool { + let val = (self.0 >> 26usize) & 0x01; val != 0 } - #[doc = "Break generation"] - pub fn set_bg(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + #[doc = "USB supply ready."] + pub fn set_usb33rdy(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); } } - impl Default for EgrAdv { - fn default() -> EgrAdv { - EgrAdv(0) + impl Default for Cr3 { + fn default() -> Cr3 { + Cr3(0) } } - #[doc = "event generation register"] + #[doc = "PWR control status register 1"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct EgrGp(pub u32); - impl EgrGp { - #[doc = "Update generation"] - pub const fn ug(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; + pub struct Csr1(pub u32); + impl Csr1 { + #[doc = "Programmable voltage detect output This bit is set and cleared by hardware. It is valid only if the PVD has been enabled by the PVDE bit. Note: since the PVD is disabled in Standby mode, this bit is equal to 0 after Standby or reset until the PVDE bit is set."] + pub const fn pvdo(&self) -> bool { + let val = (self.0 >> 4usize) & 0x01; val != 0 } - #[doc = "Update generation"] - pub fn set_ug(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + #[doc = "Programmable voltage detect output This bit is set and cleared by hardware. It is valid only if the PVD has been enabled by the PVDE bit. Note: since the PVD is disabled in Standby mode, this bit is equal to 0 after Standby or reset until the PVDE bit is set."] + pub fn set_pvdo(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); } - #[doc = "Capture/compare 1 generation"] - pub fn ccg(&self, n: usize) -> bool { - assert!(n < 4usize); - let offs = 1usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; - val != 0 - } - #[doc = "Capture/compare 1 generation"] - pub fn set_ccg(&mut self, n: usize, val: bool) { - assert!(n < 4usize); - let offs = 1usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); - } - #[doc = "Capture/Compare control update generation"] - pub const fn comg(&self) -> bool { - let val = (self.0 >> 5usize) & 0x01; + #[doc = "Voltage levels ready bit for currently used VOS and SDLEVEL This bit is set to 1 by hardware when the voltage regulator and the SD converter are both disabled and Bypass mode is selected in PWR control register 3 (PWR_CR3)."] + pub const fn actvosrdy(&self) -> bool { + let val = (self.0 >> 13usize) & 0x01; val != 0 } - #[doc = "Capture/Compare control update generation"] - pub fn set_comg(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); + #[doc = "Voltage levels ready bit for currently used VOS and SDLEVEL This bit is set to 1 by hardware when the voltage regulator and the SD converter are both disabled and Bypass mode is selected in PWR control register 3 (PWR_CR3)."] + pub fn set_actvosrdy(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); } - #[doc = "Trigger generation"] - pub const fn tg(&self) -> bool { - let val = (self.0 >> 6usize) & 0x01; - val != 0 + #[doc = "VOS currently applied for VCORE voltage scaling selection. These bits reflect the last VOS value applied to the PMU."] + pub const fn actvos(&self) -> u8 { + let val = (self.0 >> 14usize) & 0x03; + val as u8 } - #[doc = "Trigger generation"] - pub fn set_tg(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + #[doc = "VOS currently applied for VCORE voltage scaling selection. These bits reflect the last VOS value applied to the PMU."] + pub fn set_actvos(&mut self, val: u8) { + self.0 = (self.0 & !(0x03 << 14usize)) | (((val as u32) & 0x03) << 14usize); } - #[doc = "Break generation"] - pub const fn bg(&self) -> bool { - let val = (self.0 >> 7usize) & 0x01; + #[doc = "Analog voltage detector output on VDDA This bit is set and cleared by hardware. It is valid only if AVD on VDDA is enabled by the AVDEN bit. Note: Since the AVD is disabled in Standby mode, this bit is equal to 0 after Standby or reset until the AVDEN bit is set."] + pub const fn avdo(&self) -> bool { + let val = (self.0 >> 16usize) & 0x01; val != 0 } - #[doc = "Break generation"] - pub fn set_bg(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + #[doc = "Analog voltage detector output on VDDA This bit is set and cleared by hardware. It is valid only if AVD on VDDA is enabled by the AVDEN bit. Note: Since the AVD is disabled in Standby mode, this bit is equal to 0 after Standby or reset until the AVDEN bit is set."] + pub fn set_avdo(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); } } - impl Default for EgrGp { - fn default() -> EgrGp { - EgrGp(0) + impl Default for Csr1 { + fn default() -> Csr1 { + Csr1(0) } } - #[doc = "control register 2"] + #[doc = "reset only by system reset, not reset by wakeup from Standby mode5 wait states are required when writing this register (when clearing a WKUPF bit in PWR_WKUPFR, the AHB write access will complete after the WKUPF has been cleared)."] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr2Basic(pub u32); - impl Cr2Basic { - #[doc = "Master mode selection"] - pub const fn mms(&self) -> super::vals::Mms { - let val = (self.0 >> 4usize) & 0x07; - super::vals::Mms(val as u8) + pub struct Wkupcr(pub u32); + impl Wkupcr { + #[doc = "Clear Wakeup pin flag for WKUP. These bits are always read as 0."] + pub const fn wkupc(&self) -> u8 { + let val = (self.0 >> 0usize) & 0x3f; + val as u8 } - #[doc = "Master mode selection"] - pub fn set_mms(&mut self, val: super::vals::Mms) { - self.0 = (self.0 & !(0x07 << 4usize)) | (((val.0 as u32) & 0x07) << 4usize); + #[doc = "Clear Wakeup pin flag for WKUP. These bits are always read as 0."] + pub fn set_wkupc(&mut self, val: u8) { + self.0 = (self.0 & !(0x3f << 0usize)) | (((val as u32) & 0x3f) << 0usize); } } - impl Default for Cr2Basic { - fn default() -> Cr2Basic { - Cr2Basic(0) + impl Default for Wkupcr { + fn default() -> Wkupcr { + Wkupcr(0) } } - #[doc = "capture/compare mode register 2 (output mode)"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct CcmrOutput(pub u32); - impl CcmrOutput { - #[doc = "Capture/Compare 3 selection"] - pub fn ccs(&self, n: usize) -> super::vals::CcmrOutputCcs { - assert!(n < 2usize); - let offs = 0usize + n * 8usize; - let val = (self.0 >> offs) & 0x03; - super::vals::CcmrOutputCcs(val as u8) - } - #[doc = "Capture/Compare 3 selection"] - pub fn set_ccs(&mut self, n: usize, val: super::vals::CcmrOutputCcs) { - assert!(n < 2usize); - let offs = 0usize + n * 8usize; - self.0 = (self.0 & !(0x03 << offs)) | (((val.0 as u32) & 0x03) << offs); - } - #[doc = "Output compare 3 fast enable"] - pub fn ocfe(&self, n: usize) -> bool { - assert!(n < 2usize); - let offs = 2usize + n * 8usize; - let val = (self.0 >> offs) & 0x01; - val != 0 - } - #[doc = "Output compare 3 fast enable"] - pub fn set_ocfe(&mut self, n: usize, val: bool) { - assert!(n < 2usize); - let offs = 2usize + n * 8usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); - } - #[doc = "Output compare 3 preload enable"] - pub fn ocpe(&self, n: usize) -> super::vals::Ocpe { - assert!(n < 2usize); - let offs = 3usize + n * 8usize; - let val = (self.0 >> offs) & 0x01; - super::vals::Ocpe(val as u8) - } - #[doc = "Output compare 3 preload enable"] - pub fn set_ocpe(&mut self, n: usize, val: super::vals::Ocpe) { - assert!(n < 2usize); - let offs = 3usize + n * 8usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); - } - #[doc = "Output compare 3 mode"] - pub fn ocm(&self, n: usize) -> super::vals::Ocm { - assert!(n < 2usize); - let offs = 4usize + n * 8usize; - let val = (self.0 >> offs) & 0x07; - super::vals::Ocm(val as u8) - } - #[doc = "Output compare 3 mode"] - pub fn set_ocm(&mut self, n: usize, val: super::vals::Ocm) { - assert!(n < 2usize); - let offs = 4usize + n * 8usize; - self.0 = (self.0 & !(0x07 << offs)) | (((val.0 as u32) & 0x07) << offs); - } - #[doc = "Output compare 3 clear enable"] - pub fn occe(&self, n: usize) -> bool { - assert!(n < 2usize); - let offs = 7usize + n * 8usize; - let val = (self.0 >> offs) & 0x01; - val != 0 - } - #[doc = "Output compare 3 clear enable"] - pub fn set_occe(&mut self, n: usize, val: bool) { - assert!(n < 2usize); - let offs = 7usize + n * 8usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + } +} +pub mod generic { + use core::marker::PhantomData; + #[derive(Copy, Clone)] + pub struct RW; + #[derive(Copy, Clone)] + pub struct R; + #[derive(Copy, Clone)] + pub struct W; + mod sealed { + use super::*; + pub trait Access {} + impl Access for R {} + impl Access for W {} + impl Access for RW {} + } + pub trait Access: sealed::Access + Copy {} + impl Access for R {} + impl Access for W {} + impl Access for RW {} + pub trait Read: Access {} + impl Read for RW {} + impl Read for R {} + pub trait Write: Access {} + impl Write for RW {} + impl Write for W {} + #[derive(Copy, Clone)] + pub struct Reg { + ptr: *mut u8, + phantom: PhantomData<*mut (T, A)>, + } + unsafe impl Send for Reg {} + unsafe impl Sync for Reg {} + impl Reg { + pub fn from_ptr(ptr: *mut u8) -> Self { + Self { + ptr, + phantom: PhantomData, } } - impl Default for CcmrOutput { - fn default() -> CcmrOutput { - CcmrOutput(0) - } + pub fn ptr(&self) -> *mut T { + self.ptr as _ } - #[doc = "capture/compare register 1"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ccr32(pub u32); - impl Ccr32 { - #[doc = "Capture/Compare 1 value"] - pub const fn ccr(&self) -> u32 { - let val = (self.0 >> 0usize) & 0xffff_ffff; - val as u32 - } - #[doc = "Capture/Compare 1 value"] - pub fn set_ccr(&mut self, val: u32) { - self.0 = - (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); - } + } + impl Reg { + pub unsafe fn read(&self) -> T { + (self.ptr as *mut T).read_volatile() } - impl Default for Ccr32 { - fn default() -> Ccr32 { - Ccr32(0) - } + } + impl Reg { + pub unsafe fn write_value(&self, val: T) { + (self.ptr as *mut T).write_volatile(val) } - #[doc = "control register 1"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr1Basic(pub u32); - impl Cr1Basic { - #[doc = "Counter enable"] - pub const fn cen(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; - val != 0 - } - #[doc = "Counter enable"] - pub fn set_cen(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); - } - #[doc = "Update disable"] - pub const fn udis(&self) -> bool { - let val = (self.0 >> 1usize) & 0x01; - val != 0 - } - #[doc = "Update disable"] - pub fn set_udis(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); - } - #[doc = "Update request source"] - pub const fn urs(&self) -> super::vals::Urs { - let val = (self.0 >> 2usize) & 0x01; - super::vals::Urs(val as u8) - } - #[doc = "Update request source"] - pub fn set_urs(&mut self, val: super::vals::Urs) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); - } - #[doc = "One-pulse mode"] - pub const fn opm(&self) -> super::vals::Opm { - let val = (self.0 >> 3usize) & 0x01; - super::vals::Opm(val as u8) - } - #[doc = "One-pulse mode"] - pub fn set_opm(&mut self, val: super::vals::Opm) { + } + impl Reg { + pub unsafe fn write(&self, f: impl FnOnce(&mut T) -> R) -> R { + let mut val = Default::default(); + let res = f(&mut val); + self.write_value(val); + res + } + } + impl Reg { + pub unsafe fn modify(&self, f: impl FnOnce(&mut T) -> R) -> R { + let mut val = self.read(); + let res = f(&mut val); + self.write_value(val); + res + } + } +} +pub mod rcc_l0 { + use crate::generic::*; + #[doc = "Reset and clock control"] + #[derive(Copy, Clone)] + pub struct Rcc(pub *mut u8); + unsafe impl Send for Rcc {} + unsafe impl Sync for Rcc {} + impl Rcc { + #[doc = "Clock control register"] + pub fn cr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(0usize)) } + } + #[doc = "Internal clock sources calibration register"] + pub fn icscr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(4usize)) } + } + #[doc = "Clock recovery RC register"] + pub fn crrcr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(8usize)) } + } + #[doc = "Clock configuration register"] + pub fn cfgr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(12usize)) } + } + #[doc = "Clock interrupt enable register"] + pub fn cier(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(16usize)) } + } + #[doc = "Clock interrupt flag register"] + pub fn cifr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(20usize)) } + } + #[doc = "Clock interrupt clear register"] + pub fn cicr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(24usize)) } + } + #[doc = "GPIO reset register"] + pub fn ioprstr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(28usize)) } + } + #[doc = "AHB peripheral reset register"] + pub fn ahbrstr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(32usize)) } + } + #[doc = "APB2 peripheral reset register"] + pub fn apb2rstr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(36usize)) } + } + #[doc = "APB1 peripheral reset register"] + pub fn apb1rstr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(40usize)) } + } + #[doc = "GPIO clock enable register"] + pub fn iopenr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(44usize)) } + } + #[doc = "AHB peripheral clock enable register"] + pub fn ahbenr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(48usize)) } + } + #[doc = "APB2 peripheral clock enable register"] + pub fn apb2enr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(52usize)) } + } + #[doc = "APB1 peripheral clock enable register"] + pub fn apb1enr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(56usize)) } + } + #[doc = "GPIO clock enable in sleep mode register"] + pub fn iopsmen(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(60usize)) } + } + #[doc = "AHB peripheral clock enable in sleep mode register"] + pub fn ahbsmenr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(64usize)) } + } + #[doc = "APB2 peripheral clock enable in sleep mode register"] + pub fn apb2smenr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(68usize)) } + } + #[doc = "APB1 peripheral clock enable in sleep mode register"] + pub fn apb1smenr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(72usize)) } + } + #[doc = "Clock configuration register"] + pub fn ccipr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(76usize)) } + } + #[doc = "Control and status register"] + pub fn csr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(80usize)) } + } + } + pub mod regs { + use crate::generic::*; + #[doc = "GPIO clock enable in sleep mode register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Iopsmen(pub u32); + impl Iopsmen { + #[doc = "IOPASMEN"] + pub const fn iopasmen(&self) -> super::vals::Iophsmen { + let val = (self.0 >> 0usize) & 0x01; + super::vals::Iophsmen(val as u8) + } + #[doc = "IOPASMEN"] + pub fn set_iopasmen(&mut self, val: super::vals::Iophsmen) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + } + #[doc = "IOPBSMEN"] + pub const fn iopbsmen(&self) -> super::vals::Iophsmen { + let val = (self.0 >> 1usize) & 0x01; + super::vals::Iophsmen(val as u8) + } + #[doc = "IOPBSMEN"] + pub fn set_iopbsmen(&mut self, val: super::vals::Iophsmen) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + } + #[doc = "IOPCSMEN"] + pub const fn iopcsmen(&self) -> super::vals::Iophsmen { + let val = (self.0 >> 2usize) & 0x01; + super::vals::Iophsmen(val as u8) + } + #[doc = "IOPCSMEN"] + pub fn set_iopcsmen(&mut self, val: super::vals::Iophsmen) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); + } + #[doc = "IOPDSMEN"] + pub const fn iopdsmen(&self) -> super::vals::Iophsmen { + let val = (self.0 >> 3usize) & 0x01; + super::vals::Iophsmen(val as u8) + } + #[doc = "IOPDSMEN"] + pub fn set_iopdsmen(&mut self, val: super::vals::Iophsmen) { self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); } - #[doc = "Auto-reload preload enable"] - pub const fn arpe(&self) -> super::vals::Arpe { + #[doc = "Port E clock enable during Sleep mode bit"] + pub const fn iopesmen(&self) -> super::vals::Iophsmen { + let val = (self.0 >> 4usize) & 0x01; + super::vals::Iophsmen(val as u8) + } + #[doc = "Port E clock enable during Sleep mode bit"] + pub fn set_iopesmen(&mut self, val: super::vals::Iophsmen) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + } + #[doc = "IOPHSMEN"] + pub const fn iophsmen(&self) -> super::vals::Iophsmen { let val = (self.0 >> 7usize) & 0x01; - super::vals::Arpe(val as u8) + super::vals::Iophsmen(val as u8) } - #[doc = "Auto-reload preload enable"] - pub fn set_arpe(&mut self, val: super::vals::Arpe) { + #[doc = "IOPHSMEN"] + pub fn set_iophsmen(&mut self, val: super::vals::Iophsmen) { self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); } } - impl Default for Cr1Basic { - fn default() -> Cr1Basic { - Cr1Basic(0) + impl Default for Iopsmen { + fn default() -> Iopsmen { + Iopsmen(0) } } - #[doc = "status register"] + #[doc = "Clock interrupt flag register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct SrAdv(pub u32); - impl SrAdv { - #[doc = "Update interrupt flag"] - pub const fn uif(&self) -> bool { + pub struct Cifr(pub u32); + impl Cifr { + #[doc = "LSI ready interrupt flag"] + pub const fn lsirdyf(&self) -> bool { let val = (self.0 >> 0usize) & 0x01; val != 0 } - #[doc = "Update interrupt flag"] - pub fn set_uif(&mut self, val: bool) { + #[doc = "LSI ready interrupt flag"] + pub fn set_lsirdyf(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "Capture/compare 1 interrupt flag"] - pub fn ccif(&self, n: usize) -> bool { - assert!(n < 4usize); - let offs = 1usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; + #[doc = "LSE ready interrupt flag"] + pub const fn lserdyf(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; val != 0 } - #[doc = "Capture/compare 1 interrupt flag"] - pub fn set_ccif(&mut self, n: usize, val: bool) { - assert!(n < 4usize); - let offs = 1usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + #[doc = "LSE ready interrupt flag"] + pub fn set_lserdyf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - #[doc = "COM interrupt flag"] - pub const fn comif(&self) -> bool { - let val = (self.0 >> 5usize) & 0x01; + #[doc = "HSI16 ready interrupt flag"] + pub const fn hsi16rdyf(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; val != 0 } - #[doc = "COM interrupt flag"] - pub fn set_comif(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); + #[doc = "HSI16 ready interrupt flag"] + pub fn set_hsi16rdyf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); } - #[doc = "Trigger interrupt flag"] - pub const fn tif(&self) -> bool { - let val = (self.0 >> 6usize) & 0x01; + #[doc = "HSE ready interrupt flag"] + pub const fn hserdyf(&self) -> bool { + let val = (self.0 >> 3usize) & 0x01; val != 0 } - #[doc = "Trigger interrupt flag"] - pub fn set_tif(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + #[doc = "HSE ready interrupt flag"] + pub fn set_hserdyf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); } - #[doc = "Break interrupt flag"] - pub const fn bif(&self) -> bool { - let val = (self.0 >> 7usize) & 0x01; + #[doc = "PLL ready interrupt flag"] + pub const fn pllrdyf(&self) -> bool { + let val = (self.0 >> 4usize) & 0x01; val != 0 } - #[doc = "Break interrupt flag"] - pub fn set_bif(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + #[doc = "PLL ready interrupt flag"] + pub fn set_pllrdyf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); } - #[doc = "Capture/Compare 1 overcapture flag"] - pub fn ccof(&self, n: usize) -> bool { - assert!(n < 4usize); - let offs = 9usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; + #[doc = "MSI ready interrupt flag"] + pub const fn msirdyf(&self) -> bool { + let val = (self.0 >> 5usize) & 0x01; val != 0 } - #[doc = "Capture/Compare 1 overcapture flag"] - pub fn set_ccof(&mut self, n: usize, val: bool) { - assert!(n < 4usize); - let offs = 9usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); - } - } - impl Default for SrAdv { - fn default() -> SrAdv { - SrAdv(0) + #[doc = "MSI ready interrupt flag"] + pub fn set_msirdyf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); } - } - #[doc = "capture/compare mode register 1 (input mode)"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct CcmrInput(pub u32); - impl CcmrInput { - #[doc = "Capture/Compare 1 selection"] - pub fn ccs(&self, n: usize) -> super::vals::CcmrInputCcs { - assert!(n < 2usize); - let offs = 0usize + n * 8usize; - let val = (self.0 >> offs) & 0x03; - super::vals::CcmrInputCcs(val as u8) + #[doc = "HSI48 ready interrupt flag"] + pub const fn hsi48rdyf(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 } - #[doc = "Capture/Compare 1 selection"] - pub fn set_ccs(&mut self, n: usize, val: super::vals::CcmrInputCcs) { - assert!(n < 2usize); - let offs = 0usize + n * 8usize; - self.0 = (self.0 & !(0x03 << offs)) | (((val.0 as u32) & 0x03) << offs); + #[doc = "HSI48 ready interrupt flag"] + pub fn set_hsi48rdyf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - #[doc = "Input capture 1 prescaler"] - pub fn icpsc(&self, n: usize) -> u8 { - assert!(n < 2usize); - let offs = 2usize + n * 8usize; - let val = (self.0 >> offs) & 0x03; - val as u8 + #[doc = "LSE Clock Security System Interrupt flag"] + pub const fn csslsef(&self) -> super::vals::Csslsef { + let val = (self.0 >> 7usize) & 0x01; + super::vals::Csslsef(val as u8) } - #[doc = "Input capture 1 prescaler"] - pub fn set_icpsc(&mut self, n: usize, val: u8) { - assert!(n < 2usize); - let offs = 2usize + n * 8usize; - self.0 = (self.0 & !(0x03 << offs)) | (((val as u32) & 0x03) << offs); + #[doc = "LSE Clock Security System Interrupt flag"] + pub fn set_csslsef(&mut self, val: super::vals::Csslsef) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); } - #[doc = "Input capture 1 filter"] - pub fn icf(&self, n: usize) -> super::vals::Icf { - assert!(n < 2usize); - let offs = 4usize + n * 8usize; - let val = (self.0 >> offs) & 0x0f; - super::vals::Icf(val as u8) + #[doc = "Clock Security System Interrupt flag"] + pub const fn csshsef(&self) -> super::vals::Csshsef { + let val = (self.0 >> 8usize) & 0x01; + super::vals::Csshsef(val as u8) } - #[doc = "Input capture 1 filter"] - pub fn set_icf(&mut self, n: usize, val: super::vals::Icf) { - assert!(n < 2usize); - let offs = 4usize + n * 8usize; - self.0 = (self.0 & !(0x0f << offs)) | (((val.0 as u32) & 0x0f) << offs); + #[doc = "Clock Security System Interrupt flag"] + pub fn set_csshsef(&mut self, val: super::vals::Csshsef) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); } } - impl Default for CcmrInput { - fn default() -> CcmrInput { - CcmrInput(0) + impl Default for Cifr { + fn default() -> Cifr { + Cifr(0) } } - #[doc = "event generation register"] + #[doc = "GPIO clock enable register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct EgrBasic(pub u32); - impl EgrBasic { - #[doc = "Update generation"] - pub const fn ug(&self) -> bool { + pub struct Iopenr(pub u32); + impl Iopenr { + #[doc = "IO port A clock enable bit"] + pub const fn iopaen(&self) -> super::vals::Iophen { let val = (self.0 >> 0usize) & 0x01; - val != 0 - } - #[doc = "Update generation"] - pub fn set_ug(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); - } - } - impl Default for EgrBasic { - fn default() -> EgrBasic { - EgrBasic(0) + super::vals::Iophen(val as u8) } - } - #[doc = "counter"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cnt32(pub u32); - impl Cnt32 { - #[doc = "counter value"] - pub const fn cnt(&self) -> u32 { - let val = (self.0 >> 0usize) & 0xffff_ffff; - val as u32 + #[doc = "IO port A clock enable bit"] + pub fn set_iopaen(&mut self, val: super::vals::Iophen) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "counter value"] - pub fn set_cnt(&mut self, val: u32) { - self.0 = - (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + #[doc = "IO port B clock enable bit"] + pub const fn iopben(&self) -> super::vals::Iophen { + let val = (self.0 >> 1usize) & 0x01; + super::vals::Iophen(val as u8) } - } - impl Default for Cnt32 { - fn default() -> Cnt32 { - Cnt32(0) + #[doc = "IO port B clock enable bit"] + pub fn set_iopben(&mut self, val: super::vals::Iophen) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - } - #[doc = "capture/compare enable register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct CcerAdv(pub u32); - impl CcerAdv { - #[doc = "Capture/Compare 1 output enable"] - pub fn cce(&self, n: usize) -> bool { - assert!(n < 4usize); - let offs = 0usize + n * 4usize; - let val = (self.0 >> offs) & 0x01; - val != 0 + #[doc = "IO port A clock enable bit"] + pub const fn iopcen(&self) -> super::vals::Iophen { + let val = (self.0 >> 2usize) & 0x01; + super::vals::Iophen(val as u8) } - #[doc = "Capture/Compare 1 output enable"] - pub fn set_cce(&mut self, n: usize, val: bool) { - assert!(n < 4usize); - let offs = 0usize + n * 4usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + #[doc = "IO port A clock enable bit"] + pub fn set_iopcen(&mut self, val: super::vals::Iophen) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); } - #[doc = "Capture/Compare 1 output Polarity"] - pub fn ccp(&self, n: usize) -> bool { - assert!(n < 4usize); - let offs = 1usize + n * 4usize; - let val = (self.0 >> offs) & 0x01; - val != 0 + #[doc = "I/O port D clock enable bit"] + pub const fn iopden(&self) -> super::vals::Iophen { + let val = (self.0 >> 3usize) & 0x01; + super::vals::Iophen(val as u8) } - #[doc = "Capture/Compare 1 output Polarity"] - pub fn set_ccp(&mut self, n: usize, val: bool) { - assert!(n < 4usize); - let offs = 1usize + n * 4usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + #[doc = "I/O port D clock enable bit"] + pub fn set_iopden(&mut self, val: super::vals::Iophen) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); } - #[doc = "Capture/Compare 1 complementary output enable"] - pub fn ccne(&self, n: usize) -> bool { - assert!(n < 4usize); - let offs = 2usize + n * 4usize; - let val = (self.0 >> offs) & 0x01; - val != 0 + #[doc = "I/O port E clock enable bit"] + pub const fn iopeen(&self) -> super::vals::Iophen { + let val = (self.0 >> 4usize) & 0x01; + super::vals::Iophen(val as u8) } - #[doc = "Capture/Compare 1 complementary output enable"] - pub fn set_ccne(&mut self, n: usize, val: bool) { - assert!(n < 4usize); - let offs = 2usize + n * 4usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + #[doc = "I/O port E clock enable bit"] + pub fn set_iopeen(&mut self, val: super::vals::Iophen) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); } - #[doc = "Capture/Compare 1 output Polarity"] - pub fn ccnp(&self, n: usize) -> bool { - assert!(n < 4usize); - let offs = 3usize + n * 4usize; - let val = (self.0 >> offs) & 0x01; - val != 0 + #[doc = "I/O port H clock enable bit"] + pub const fn iophen(&self) -> super::vals::Iophen { + let val = (self.0 >> 7usize) & 0x01; + super::vals::Iophen(val as u8) } - #[doc = "Capture/Compare 1 output Polarity"] - pub fn set_ccnp(&mut self, n: usize, val: bool) { - assert!(n < 4usize); - let offs = 3usize + n * 4usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + #[doc = "I/O port H clock enable bit"] + pub fn set_iophen(&mut self, val: super::vals::Iophen) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); } } - impl Default for CcerAdv { - fn default() -> CcerAdv { - CcerAdv(0) + impl Default for Iopenr { + fn default() -> Iopenr { + Iopenr(0) } } - #[doc = "DMA control register"] + #[doc = "Internal clock sources calibration register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Dcr(pub u32); - impl Dcr { - #[doc = "DMA base address"] - pub const fn dba(&self) -> u8 { - let val = (self.0 >> 0usize) & 0x1f; + pub struct Icscr(pub u32); + impl Icscr { + #[doc = "nternal high speed clock calibration"] + pub const fn hsi16cal(&self) -> u8 { + let val = (self.0 >> 0usize) & 0xff; val as u8 } - #[doc = "DMA base address"] - pub fn set_dba(&mut self, val: u8) { - self.0 = (self.0 & !(0x1f << 0usize)) | (((val as u32) & 0x1f) << 0usize); + #[doc = "nternal high speed clock calibration"] + pub fn set_hsi16cal(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize); } - #[doc = "DMA burst length"] - pub const fn dbl(&self) -> u8 { + #[doc = "High speed internal clock trimming"] + pub const fn hsi16trim(&self) -> u8 { let val = (self.0 >> 8usize) & 0x1f; val as u8 } - #[doc = "DMA burst length"] - pub fn set_dbl(&mut self, val: u8) { + #[doc = "High speed internal clock trimming"] + pub fn set_hsi16trim(&mut self, val: u8) { self.0 = (self.0 & !(0x1f << 8usize)) | (((val as u32) & 0x1f) << 8usize); } - } - impl Default for Dcr { - fn default() -> Dcr { - Dcr(0) + #[doc = "MSI clock ranges"] + pub const fn msirange(&self) -> super::vals::Msirange { + let val = (self.0 >> 13usize) & 0x07; + super::vals::Msirange(val as u8) } - } - #[doc = "DMA/Interrupt enable register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct DierGp(pub u32); - impl DierGp { - #[doc = "Update interrupt enable"] - pub const fn uie(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; - val != 0 + #[doc = "MSI clock ranges"] + pub fn set_msirange(&mut self, val: super::vals::Msirange) { + self.0 = (self.0 & !(0x07 << 13usize)) | (((val.0 as u32) & 0x07) << 13usize); } - #[doc = "Update interrupt enable"] - pub fn set_uie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); - } - #[doc = "Capture/Compare 1 interrupt enable"] - pub fn ccie(&self, n: usize) -> bool { - assert!(n < 4usize); - let offs = 1usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; - val != 0 - } - #[doc = "Capture/Compare 1 interrupt enable"] - pub fn set_ccie(&mut self, n: usize, val: bool) { - assert!(n < 4usize); - let offs = 1usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); - } - #[doc = "Trigger interrupt enable"] - pub const fn tie(&self) -> bool { - let val = (self.0 >> 6usize) & 0x01; - val != 0 - } - #[doc = "Trigger interrupt enable"] - pub fn set_tie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); - } - #[doc = "Update DMA request enable"] - pub const fn ude(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; - val != 0 - } - #[doc = "Update DMA request enable"] - pub fn set_ude(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); - } - #[doc = "Capture/Compare 1 DMA request enable"] - pub fn ccde(&self, n: usize) -> bool { - assert!(n < 4usize); - let offs = 9usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; - val != 0 + #[doc = "MSI clock calibration"] + pub const fn msical(&self) -> u8 { + let val = (self.0 >> 16usize) & 0xff; + val as u8 } - #[doc = "Capture/Compare 1 DMA request enable"] - pub fn set_ccde(&mut self, n: usize, val: bool) { - assert!(n < 4usize); - let offs = 9usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + #[doc = "MSI clock calibration"] + pub fn set_msical(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 16usize)) | (((val as u32) & 0xff) << 16usize); } - #[doc = "Trigger DMA request enable"] - pub const fn tde(&self) -> bool { - let val = (self.0 >> 14usize) & 0x01; - val != 0 + #[doc = "MSI clock trimming"] + pub const fn msitrim(&self) -> u8 { + let val = (self.0 >> 24usize) & 0xff; + val as u8 } - #[doc = "Trigger DMA request enable"] - pub fn set_tde(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); + #[doc = "MSI clock trimming"] + pub fn set_msitrim(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 24usize)) | (((val as u32) & 0xff) << 24usize); } } - impl Default for DierGp { - fn default() -> DierGp { - DierGp(0) + impl Default for Icscr { + fn default() -> Icscr { + Icscr(0) } } - #[doc = "DMA/Interrupt enable register"] + #[doc = "AHB peripheral reset register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct DierAdv(pub u32); - impl DierAdv { - #[doc = "Update interrupt enable"] - pub const fn uie(&self) -> bool { + pub struct Ahbrstr(pub u32); + impl Ahbrstr { + #[doc = "DMA reset"] + pub const fn dmarst(&self) -> bool { let val = (self.0 >> 0usize) & 0x01; val != 0 } - #[doc = "Update interrupt enable"] - pub fn set_uie(&mut self, val: bool) { + #[doc = "DMA reset"] + pub fn set_dmarst(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "Capture/Compare 1 interrupt enable"] - pub fn ccie(&self, n: usize) -> bool { - assert!(n < 4usize); - let offs = 1usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; - val != 0 - } - #[doc = "Capture/Compare 1 interrupt enable"] - pub fn set_ccie(&mut self, n: usize, val: bool) { - assert!(n < 4usize); - let offs = 1usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); - } - #[doc = "COM interrupt enable"] - pub const fn comie(&self) -> bool { - let val = (self.0 >> 5usize) & 0x01; - val != 0 - } - #[doc = "COM interrupt enable"] - pub fn set_comie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); - } - #[doc = "Trigger interrupt enable"] - pub const fn tie(&self) -> bool { - let val = (self.0 >> 6usize) & 0x01; - val != 0 - } - #[doc = "Trigger interrupt enable"] - pub fn set_tie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); - } - #[doc = "Break interrupt enable"] - pub const fn bie(&self) -> bool { - let val = (self.0 >> 7usize) & 0x01; + #[doc = "Memory interface reset"] + pub const fn mifrst(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; val != 0 } - #[doc = "Break interrupt enable"] - pub fn set_bie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + #[doc = "Memory interface reset"] + pub fn set_mifrst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); } - #[doc = "Update DMA request enable"] - pub const fn ude(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; + #[doc = "Test integration module reset"] + pub const fn crcrst(&self) -> bool { + let val = (self.0 >> 12usize) & 0x01; val != 0 } - #[doc = "Update DMA request enable"] - pub fn set_ude(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + #[doc = "Test integration module reset"] + pub fn set_crcrst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); } - #[doc = "Capture/Compare 1 DMA request enable"] - pub fn ccde(&self, n: usize) -> bool { - assert!(n < 4usize); - let offs = 9usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; + #[doc = "Touch Sensing reset"] + pub const fn touchrst(&self) -> bool { + let val = (self.0 >> 16usize) & 0x01; val != 0 } - #[doc = "Capture/Compare 1 DMA request enable"] - pub fn set_ccde(&mut self, n: usize, val: bool) { - assert!(n < 4usize); - let offs = 9usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + #[doc = "Touch Sensing reset"] + pub fn set_touchrst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); } - #[doc = "COM DMA request enable"] - pub const fn comde(&self) -> bool { - let val = (self.0 >> 13usize) & 0x01; + #[doc = "Random Number Generator module reset"] + pub const fn rngrst(&self) -> bool { + let val = (self.0 >> 20usize) & 0x01; val != 0 } - #[doc = "COM DMA request enable"] - pub fn set_comde(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); + #[doc = "Random Number Generator module reset"] + pub fn set_rngrst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize); } - #[doc = "Trigger DMA request enable"] - pub const fn tde(&self) -> bool { - let val = (self.0 >> 14usize) & 0x01; + #[doc = "Crypto module reset"] + pub const fn cryprst(&self) -> bool { + let val = (self.0 >> 24usize) & 0x01; val != 0 } - #[doc = "Trigger DMA request enable"] - pub fn set_tde(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); + #[doc = "Crypto module reset"] + pub fn set_cryprst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize); } } - impl Default for DierAdv { - fn default() -> DierAdv { - DierAdv(0) + impl Default for Ahbrstr { + fn default() -> Ahbrstr { + Ahbrstr(0) } } - #[doc = "control register 1"] + #[doc = "Clock control register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr1Gp(pub u32); - impl Cr1Gp { - #[doc = "Counter enable"] - pub const fn cen(&self) -> bool { + pub struct Cr(pub u32); + impl Cr { + #[doc = "16 MHz high-speed internal clock enable"] + pub const fn hsi16on(&self) -> super::vals::Pllon { let val = (self.0 >> 0usize) & 0x01; - val != 0 + super::vals::Pllon(val as u8) } - #[doc = "Counter enable"] - pub fn set_cen(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + #[doc = "16 MHz high-speed internal clock enable"] + pub fn set_hsi16on(&mut self, val: super::vals::Pllon) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "Update disable"] - pub const fn udis(&self) -> bool { + #[doc = "High-speed internal clock enable bit for some IP kernels"] + pub const fn hsi16keron(&self) -> super::vals::Pllon { let val = (self.0 >> 1usize) & 0x01; - val != 0 + super::vals::Pllon(val as u8) } - #[doc = "Update disable"] - pub fn set_udis(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + #[doc = "High-speed internal clock enable bit for some IP kernels"] + pub fn set_hsi16keron(&mut self, val: super::vals::Pllon) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - #[doc = "Update request source"] - pub const fn urs(&self) -> super::vals::Urs { + #[doc = "Internal high-speed clock ready flag"] + pub const fn hsi16rdyf(&self) -> bool { let val = (self.0 >> 2usize) & 0x01; - super::vals::Urs(val as u8) + val != 0 } - #[doc = "Update request source"] - pub fn set_urs(&mut self, val: super::vals::Urs) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); + #[doc = "Internal high-speed clock ready flag"] + pub fn set_hsi16rdyf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); } - #[doc = "One-pulse mode"] - pub const fn opm(&self) -> super::vals::Opm { + #[doc = "HSI16DIVEN"] + pub const fn hsi16diven(&self) -> super::vals::Hsidiven { let val = (self.0 >> 3usize) & 0x01; - super::vals::Opm(val as u8) + super::vals::Hsidiven(val as u8) } - #[doc = "One-pulse mode"] - pub fn set_opm(&mut self, val: super::vals::Opm) { + #[doc = "HSI16DIVEN"] + pub fn set_hsi16diven(&mut self, val: super::vals::Hsidiven) { self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); } - #[doc = "Direction"] - pub const fn dir(&self) -> super::vals::Dir { + #[doc = "HSI16DIVF"] + pub const fn hsi16divf(&self) -> bool { let val = (self.0 >> 4usize) & 0x01; - super::vals::Dir(val as u8) - } - #[doc = "Direction"] - pub fn set_dir(&mut self, val: super::vals::Dir) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + val != 0 } - #[doc = "Center-aligned mode selection"] - pub const fn cms(&self) -> super::vals::Cms { - let val = (self.0 >> 5usize) & 0x03; - super::vals::Cms(val as u8) + #[doc = "HSI16DIVF"] + pub fn set_hsi16divf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); } - #[doc = "Center-aligned mode selection"] - pub fn set_cms(&mut self, val: super::vals::Cms) { - self.0 = (self.0 & !(0x03 << 5usize)) | (((val.0 as u32) & 0x03) << 5usize); - } - #[doc = "Auto-reload preload enable"] - pub const fn arpe(&self) -> super::vals::Arpe { - let val = (self.0 >> 7usize) & 0x01; - super::vals::Arpe(val as u8) + #[doc = "16 MHz high-speed internal clock output enable"] + pub const fn hsi16outen(&self) -> super::vals::Hsiouten { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Hsiouten(val as u8) } - #[doc = "Auto-reload preload enable"] - pub fn set_arpe(&mut self, val: super::vals::Arpe) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); + #[doc = "16 MHz high-speed internal clock output enable"] + pub fn set_hsi16outen(&mut self, val: super::vals::Hsiouten) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "Clock division"] - pub const fn ckd(&self) -> super::vals::Ckd { - let val = (self.0 >> 8usize) & 0x03; - super::vals::Ckd(val as u8) + #[doc = "MSI clock enable bit"] + pub const fn msion(&self) -> super::vals::Pllon { + let val = (self.0 >> 8usize) & 0x01; + super::vals::Pllon(val as u8) } - #[doc = "Clock division"] - pub fn set_ckd(&mut self, val: super::vals::Ckd) { - self.0 = (self.0 & !(0x03 << 8usize)) | (((val.0 as u32) & 0x03) << 8usize); + #[doc = "MSI clock enable bit"] + pub fn set_msion(&mut self, val: super::vals::Pllon) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); } - } - impl Default for Cr1Gp { - fn default() -> Cr1Gp { - Cr1Gp(0) + #[doc = "MSI clock ready flag"] + pub const fn msirdy(&self) -> bool { + let val = (self.0 >> 9usize) & 0x01; + val != 0 } - } - #[doc = "DMA address for full transfer"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Dmar(pub u32); - impl Dmar { - #[doc = "DMA register for burst accesses"] - pub const fn dmab(&self) -> u16 { - let val = (self.0 >> 0usize) & 0xffff; - val as u16 + #[doc = "MSI clock ready flag"] + pub fn set_msirdy(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); } - #[doc = "DMA register for burst accesses"] - pub fn set_dmab(&mut self, val: u16) { - self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); + #[doc = "HSE clock enable bit"] + pub const fn hseon(&self) -> super::vals::Pllon { + let val = (self.0 >> 16usize) & 0x01; + super::vals::Pllon(val as u8) } - } - impl Default for Dmar { - fn default() -> Dmar { - Dmar(0) + #[doc = "HSE clock enable bit"] + pub fn set_hseon(&mut self, val: super::vals::Pllon) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); } - } - #[doc = "status register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct SrBasic(pub u32); - impl SrBasic { - #[doc = "Update interrupt flag"] - pub const fn uif(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; + #[doc = "HSE clock ready flag"] + pub const fn hserdy(&self) -> bool { + let val = (self.0 >> 17usize) & 0x01; val != 0 } - #[doc = "Update interrupt flag"] - pub fn set_uif(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); - } - } - impl Default for SrBasic { - fn default() -> SrBasic { - SrBasic(0) + #[doc = "HSE clock ready flag"] + pub fn set_hserdy(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); } - } - #[doc = "capture/compare register 1"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ccr16(pub u32); - impl Ccr16 { - #[doc = "Capture/Compare 1 value"] - pub const fn ccr(&self) -> u16 { - let val = (self.0 >> 0usize) & 0xffff; - val as u16 + #[doc = "HSE clock bypass bit"] + pub const fn hsebyp(&self) -> super::vals::Hsebyp { + let val = (self.0 >> 18usize) & 0x01; + super::vals::Hsebyp(val as u8) } - #[doc = "Capture/Compare 1 value"] - pub fn set_ccr(&mut self, val: u16) { - self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); + #[doc = "HSE clock bypass bit"] + pub fn set_hsebyp(&mut self, val: super::vals::Hsebyp) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); } - } - impl Default for Ccr16 { - fn default() -> Ccr16 { - Ccr16(0) + #[doc = "Clock security system on HSE enable bit"] + pub const fn csshseon(&self) -> super::vals::Pllon { + let val = (self.0 >> 19usize) & 0x01; + super::vals::Pllon(val as u8) } - } - #[doc = "break and dead-time register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Bdtr(pub u32); - impl Bdtr { - #[doc = "Dead-time generator setup"] - pub const fn dtg(&self) -> u8 { - let val = (self.0 >> 0usize) & 0xff; - val as u8 + #[doc = "Clock security system on HSE enable bit"] + pub fn set_csshseon(&mut self, val: super::vals::Pllon) { + self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); } - #[doc = "Dead-time generator setup"] - pub fn set_dtg(&mut self, val: u8) { - self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize); + #[doc = "TC/LCD prescaler"] + pub const fn rtcpre(&self) -> super::vals::Rtcpre { + let val = (self.0 >> 20usize) & 0x03; + super::vals::Rtcpre(val as u8) } - #[doc = "Lock configuration"] - pub const fn lock(&self) -> u8 { - let val = (self.0 >> 8usize) & 0x03; - val as u8 + #[doc = "TC/LCD prescaler"] + pub fn set_rtcpre(&mut self, val: super::vals::Rtcpre) { + self.0 = (self.0 & !(0x03 << 20usize)) | (((val.0 as u32) & 0x03) << 20usize); } - #[doc = "Lock configuration"] - pub fn set_lock(&mut self, val: u8) { - self.0 = (self.0 & !(0x03 << 8usize)) | (((val as u32) & 0x03) << 8usize); + #[doc = "PLL enable bit"] + pub const fn pllon(&self) -> super::vals::Pllon { + let val = (self.0 >> 24usize) & 0x01; + super::vals::Pllon(val as u8) } - #[doc = "Off-state selection for Idle mode"] - pub const fn ossi(&self) -> super::vals::Ossi { - let val = (self.0 >> 10usize) & 0x01; - super::vals::Ossi(val as u8) + #[doc = "PLL enable bit"] + pub fn set_pllon(&mut self, val: super::vals::Pllon) { + self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); } - #[doc = "Off-state selection for Idle mode"] - pub fn set_ossi(&mut self, val: super::vals::Ossi) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); + #[doc = "PLL clock ready flag"] + pub const fn pllrdy(&self) -> bool { + let val = (self.0 >> 25usize) & 0x01; + val != 0 } - #[doc = "Off-state selection for Run mode"] - pub const fn ossr(&self) -> super::vals::Ossr { - let val = (self.0 >> 11usize) & 0x01; - super::vals::Ossr(val as u8) + #[doc = "PLL clock ready flag"] + pub fn set_pllrdy(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize); } - #[doc = "Off-state selection for Run mode"] - pub fn set_ossr(&mut self, val: super::vals::Ossr) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); + } + impl Default for Cr { + fn default() -> Cr { + Cr(0) } - #[doc = "Break enable"] - pub const fn bke(&self) -> bool { - let val = (self.0 >> 12usize) & 0x01; + } + #[doc = "Clock recovery RC register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Crrcr(pub u32); + impl Crrcr { + #[doc = "48MHz HSI clock enable bit"] + pub const fn hsi48on(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; val != 0 } - #[doc = "Break enable"] - pub fn set_bke(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); + #[doc = "48MHz HSI clock enable bit"] + pub fn set_hsi48on(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "Break polarity"] - pub const fn bkp(&self) -> bool { - let val = (self.0 >> 13usize) & 0x01; + #[doc = "48MHz HSI clock ready flag"] + pub const fn hsi48rdy(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; val != 0 } - #[doc = "Break polarity"] - pub fn set_bkp(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); + #[doc = "48MHz HSI clock ready flag"] + pub fn set_hsi48rdy(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - #[doc = "Automatic output enable"] - pub const fn aoe(&self) -> bool { - let val = (self.0 >> 14usize) & 0x01; + #[doc = "48 MHz HSI clock divided by 6 output enable"] + pub const fn hsi48div6en(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; val != 0 } - #[doc = "Automatic output enable"] - pub fn set_aoe(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); + #[doc = "48 MHz HSI clock divided by 6 output enable"] + pub fn set_hsi48div6en(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); } - #[doc = "Main output enable"] - pub const fn moe(&self) -> bool { - let val = (self.0 >> 15usize) & 0x01; - val != 0 + #[doc = "48 MHz HSI clock calibration"] + pub const fn hsi48cal(&self) -> u8 { + let val = (self.0 >> 8usize) & 0xff; + val as u8 } - #[doc = "Main output enable"] - pub fn set_moe(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); + #[doc = "48 MHz HSI clock calibration"] + pub fn set_hsi48cal(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 8usize)) | (((val as u32) & 0xff) << 8usize); } } - impl Default for Bdtr { - fn default() -> Bdtr { - Bdtr(0) + impl Default for Crrcr { + fn default() -> Crrcr { + Crrcr(0) } } - #[doc = "auto-reload register"] + #[doc = "APB2 peripheral reset register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Arr16(pub u32); - impl Arr16 { - #[doc = "Auto-reload value"] - pub const fn arr(&self) -> u16 { - let val = (self.0 >> 0usize) & 0xffff; - val as u16 + pub struct Apb2rstr(pub u32); + impl Apb2rstr { + #[doc = "System configuration controller reset"] + pub const fn syscfgrst(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 } - #[doc = "Auto-reload value"] - pub fn set_arr(&mut self, val: u16) { - self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); + #[doc = "System configuration controller reset"] + pub fn set_syscfgrst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - } - impl Default for Arr16 { - fn default() -> Arr16 { - Arr16(0) + #[doc = "TIM21 timer reset"] + pub const fn tim21rst(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; + val != 0 } - } - #[doc = "control register 2"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr2Gp(pub u32); - impl Cr2Gp { - #[doc = "Capture/compare DMA selection"] - pub const fn ccds(&self) -> super::vals::Ccds { - let val = (self.0 >> 3usize) & 0x01; - super::vals::Ccds(val as u8) + #[doc = "TIM21 timer reset"] + pub fn set_tim21rst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); } - #[doc = "Capture/compare DMA selection"] - pub fn set_ccds(&mut self, val: super::vals::Ccds) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); + #[doc = "TIM22 timer reset"] + pub const fn tim22rst(&self) -> bool { + let val = (self.0 >> 5usize) & 0x01; + val != 0 } - #[doc = "Master mode selection"] - pub const fn mms(&self) -> super::vals::Mms { - let val = (self.0 >> 4usize) & 0x07; - super::vals::Mms(val as u8) + #[doc = "TIM22 timer reset"] + pub fn set_tim22rst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); } - #[doc = "Master mode selection"] - pub fn set_mms(&mut self, val: super::vals::Mms) { - self.0 = (self.0 & !(0x07 << 4usize)) | (((val.0 as u32) & 0x07) << 4usize); + #[doc = "ADC interface reset"] + pub const fn adcrst(&self) -> bool { + let val = (self.0 >> 9usize) & 0x01; + val != 0 } - #[doc = "TI1 selection"] - pub const fn ti1s(&self) -> super::vals::Tis { - let val = (self.0 >> 7usize) & 0x01; - super::vals::Tis(val as u8) + #[doc = "ADC interface reset"] + pub fn set_adcrst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); } - #[doc = "TI1 selection"] - pub fn set_ti1s(&mut self, val: super::vals::Tis) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); + #[doc = "SPI 1 reset"] + pub const fn spi1rst(&self) -> bool { + let val = (self.0 >> 12usize) & 0x01; + val != 0 } - } - impl Default for Cr2Gp { - fn default() -> Cr2Gp { - Cr2Gp(0) + #[doc = "SPI 1 reset"] + pub fn set_spi1rst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); } - } - #[doc = "repetition counter register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Rcr(pub u32); - impl Rcr { - #[doc = "Repetition counter value"] - pub const fn rep(&self) -> u8 { - let val = (self.0 >> 0usize) & 0xff; - val as u8 + #[doc = "USART1 reset"] + pub const fn usart1rst(&self) -> bool { + let val = (self.0 >> 14usize) & 0x01; + val != 0 } - #[doc = "Repetition counter value"] - pub fn set_rep(&mut self, val: u8) { - self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize); + #[doc = "USART1 reset"] + pub fn set_usart1rst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); + } + #[doc = "DBG reset"] + pub const fn dbgrst(&self) -> bool { + let val = (self.0 >> 22usize) & 0x01; + val != 0 + } + #[doc = "DBG reset"] + pub fn set_dbgrst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); } } - impl Default for Rcr { - fn default() -> Rcr { - Rcr(0) + impl Default for Apb2rstr { + fn default() -> Apb2rstr { + Apb2rstr(0) } } - #[doc = "slave mode control register"] + #[doc = "AHB peripheral clock enable in sleep mode register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Smcr(pub u32); - impl Smcr { - #[doc = "Slave mode selection"] - pub const fn sms(&self) -> super::vals::Sms { - let val = (self.0 >> 0usize) & 0x07; - super::vals::Sms(val as u8) + pub struct Ahbsmenr(pub u32); + impl Ahbsmenr { + #[doc = "DMA clock enable during sleep mode bit"] + pub const fn dmasmen(&self) -> super::vals::Dmasmen { + let val = (self.0 >> 0usize) & 0x01; + super::vals::Dmasmen(val as u8) } - #[doc = "Slave mode selection"] - pub fn set_sms(&mut self, val: super::vals::Sms) { - self.0 = (self.0 & !(0x07 << 0usize)) | (((val.0 as u32) & 0x07) << 0usize); + #[doc = "DMA clock enable during sleep mode bit"] + pub fn set_dmasmen(&mut self, val: super::vals::Dmasmen) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "Trigger selection"] - pub const fn ts(&self) -> super::vals::Ts { - let val = (self.0 >> 4usize) & 0x07; - super::vals::Ts(val as u8) + #[doc = "NVM interface clock enable during sleep mode bit"] + pub const fn mifsmen(&self) -> super::vals::Mifsmen { + let val = (self.0 >> 8usize) & 0x01; + super::vals::Mifsmen(val as u8) } - #[doc = "Trigger selection"] - pub fn set_ts(&mut self, val: super::vals::Ts) { - self.0 = (self.0 & !(0x07 << 4usize)) | (((val.0 as u32) & 0x07) << 4usize); + #[doc = "NVM interface clock enable during sleep mode bit"] + pub fn set_mifsmen(&mut self, val: super::vals::Mifsmen) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); } - #[doc = "Master/Slave mode"] - pub const fn msm(&self) -> super::vals::Msm { - let val = (self.0 >> 7usize) & 0x01; - super::vals::Msm(val as u8) + #[doc = "SRAM interface clock enable during sleep mode bit"] + pub const fn sramsmen(&self) -> super::vals::Sramsmen { + let val = (self.0 >> 9usize) & 0x01; + super::vals::Sramsmen(val as u8) } - #[doc = "Master/Slave mode"] - pub fn set_msm(&mut self, val: super::vals::Msm) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); + #[doc = "SRAM interface clock enable during sleep mode bit"] + pub fn set_sramsmen(&mut self, val: super::vals::Sramsmen) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); } - #[doc = "External trigger filter"] - pub const fn etf(&self) -> super::vals::Etf { - let val = (self.0 >> 8usize) & 0x0f; - super::vals::Etf(val as u8) + #[doc = "CRC clock enable during sleep mode bit"] + pub const fn crcsmen(&self) -> super::vals::Crcsmen { + let val = (self.0 >> 12usize) & 0x01; + super::vals::Crcsmen(val as u8) } - #[doc = "External trigger filter"] - pub fn set_etf(&mut self, val: super::vals::Etf) { - self.0 = (self.0 & !(0x0f << 8usize)) | (((val.0 as u32) & 0x0f) << 8usize); + #[doc = "CRC clock enable during sleep mode bit"] + pub fn set_crcsmen(&mut self, val: super::vals::Crcsmen) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); } - #[doc = "External trigger prescaler"] - pub const fn etps(&self) -> super::vals::Etps { - let val = (self.0 >> 12usize) & 0x03; - super::vals::Etps(val as u8) + #[doc = "Touch Sensing clock enable during sleep mode bit"] + pub const fn touchsmen(&self) -> bool { + let val = (self.0 >> 16usize) & 0x01; + val != 0 } - #[doc = "External trigger prescaler"] - pub fn set_etps(&mut self, val: super::vals::Etps) { - self.0 = (self.0 & !(0x03 << 12usize)) | (((val.0 as u32) & 0x03) << 12usize); + #[doc = "Touch Sensing clock enable during sleep mode bit"] + pub fn set_touchsmen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); } - #[doc = "External clock enable"] - pub const fn ece(&self) -> super::vals::Ece { - let val = (self.0 >> 14usize) & 0x01; - super::vals::Ece(val as u8) + #[doc = "Random Number Generator clock enable during sleep mode bit"] + pub const fn rngsmen(&self) -> bool { + let val = (self.0 >> 20usize) & 0x01; + val != 0 } - #[doc = "External clock enable"] - pub fn set_ece(&mut self, val: super::vals::Ece) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); + #[doc = "Random Number Generator clock enable during sleep mode bit"] + pub fn set_rngsmen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize); } - #[doc = "External trigger polarity"] - pub const fn etp(&self) -> super::vals::Etp { - let val = (self.0 >> 15usize) & 0x01; - super::vals::Etp(val as u8) + #[doc = "Crypto clock enable during sleep mode bit"] + pub const fn crypsmen(&self) -> super::vals::Crypsmen { + let val = (self.0 >> 24usize) & 0x01; + super::vals::Crypsmen(val as u8) } - #[doc = "External trigger polarity"] - pub fn set_etp(&mut self, val: super::vals::Etp) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + #[doc = "Crypto clock enable during sleep mode bit"] + pub fn set_crypsmen(&mut self, val: super::vals::Crypsmen) { + self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); } } - impl Default for Smcr { - fn default() -> Smcr { - Smcr(0) + impl Default for Ahbsmenr { + fn default() -> Ahbsmenr { + Ahbsmenr(0) } } - #[doc = "capture/compare enable register"] + #[doc = "APB1 peripheral clock enable in sleep mode register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct CcerGp(pub u32); - impl CcerGp { - #[doc = "Capture/Compare 1 output enable"] - pub fn cce(&self, n: usize) -> bool { - assert!(n < 4usize); - let offs = 0usize + n * 4usize; - let val = (self.0 >> offs) & 0x01; - val != 0 + pub struct Apb1smenr(pub u32); + impl Apb1smenr { + #[doc = "Timer2 clock enable during sleep mode bit"] + pub const fn tim2smen(&self) -> super::vals::Lptimsmen { + let val = (self.0 >> 0usize) & 0x01; + super::vals::Lptimsmen(val as u8) } - #[doc = "Capture/Compare 1 output enable"] - pub fn set_cce(&mut self, n: usize, val: bool) { - assert!(n < 4usize); - let offs = 0usize + n * 4usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + #[doc = "Timer2 clock enable during sleep mode bit"] + pub fn set_tim2smen(&mut self, val: super::vals::Lptimsmen) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "Capture/Compare 1 output Polarity"] - pub fn ccp(&self, n: usize) -> bool { - assert!(n < 4usize); - let offs = 1usize + n * 4usize; - let val = (self.0 >> offs) & 0x01; - val != 0 + #[doc = "Timer3 clock enable during Sleep mode bit"] + pub const fn tim3smen(&self) -> super::vals::Lptimsmen { + let val = (self.0 >> 1usize) & 0x01; + super::vals::Lptimsmen(val as u8) } - #[doc = "Capture/Compare 1 output Polarity"] - pub fn set_ccp(&mut self, n: usize, val: bool) { - assert!(n < 4usize); - let offs = 1usize + n * 4usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + #[doc = "Timer3 clock enable during Sleep mode bit"] + pub fn set_tim3smen(&mut self, val: super::vals::Lptimsmen) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - #[doc = "Capture/Compare 1 output Polarity"] - pub fn ccnp(&self, n: usize) -> bool { - assert!(n < 4usize); - let offs = 3usize + n * 4usize; - let val = (self.0 >> offs) & 0x01; - val != 0 + #[doc = "Timer 6 clock enable during sleep mode bit"] + pub const fn tim6smen(&self) -> super::vals::Lptimsmen { + let val = (self.0 >> 4usize) & 0x01; + super::vals::Lptimsmen(val as u8) } - #[doc = "Capture/Compare 1 output Polarity"] - pub fn set_ccnp(&mut self, n: usize, val: bool) { - assert!(n < 4usize); - let offs = 3usize + n * 4usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + #[doc = "Timer 6 clock enable during sleep mode bit"] + pub fn set_tim6smen(&mut self, val: super::vals::Lptimsmen) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); } - } - impl Default for CcerGp { - fn default() -> CcerGp { - CcerGp(0) + #[doc = "Timer 7 clock enable during Sleep mode bit"] + pub const fn tim7smen(&self) -> super::vals::Lptimsmen { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Lptimsmen(val as u8) } - } - #[doc = "status register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct SrGp(pub u32); - impl SrGp { - #[doc = "Update interrupt flag"] - pub const fn uif(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; - val != 0 + #[doc = "Timer 7 clock enable during Sleep mode bit"] + pub fn set_tim7smen(&mut self, val: super::vals::Lptimsmen) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "Update interrupt flag"] - pub fn set_uif(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + #[doc = "Window watchdog clock enable during sleep mode bit"] + pub const fn wwdgsmen(&self) -> super::vals::Lptimsmen { + let val = (self.0 >> 11usize) & 0x01; + super::vals::Lptimsmen(val as u8) } - #[doc = "Capture/compare 1 interrupt flag"] - pub fn ccif(&self, n: usize) -> bool { - assert!(n < 4usize); - let offs = 1usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; - val != 0 + #[doc = "Window watchdog clock enable during sleep mode bit"] + pub fn set_wwdgsmen(&mut self, val: super::vals::Lptimsmen) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); } - #[doc = "Capture/compare 1 interrupt flag"] - pub fn set_ccif(&mut self, n: usize, val: bool) { - assert!(n < 4usize); - let offs = 1usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + #[doc = "SPI2 clock enable during sleep mode bit"] + pub const fn spi2smen(&self) -> super::vals::Lptimsmen { + let val = (self.0 >> 14usize) & 0x01; + super::vals::Lptimsmen(val as u8) } - #[doc = "COM interrupt flag"] - pub const fn comif(&self) -> bool { - let val = (self.0 >> 5usize) & 0x01; - val != 0 + #[doc = "SPI2 clock enable during sleep mode bit"] + pub fn set_spi2smen(&mut self, val: super::vals::Lptimsmen) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); } - #[doc = "COM interrupt flag"] - pub fn set_comif(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); + #[doc = "UART2 clock enable during sleep mode bit"] + pub const fn usart2smen(&self) -> super::vals::Lptimsmen { + let val = (self.0 >> 17usize) & 0x01; + super::vals::Lptimsmen(val as u8) } - #[doc = "Trigger interrupt flag"] - pub const fn tif(&self) -> bool { - let val = (self.0 >> 6usize) & 0x01; - val != 0 + #[doc = "UART2 clock enable during sleep mode bit"] + pub fn set_usart2smen(&mut self, val: super::vals::Lptimsmen) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); } - #[doc = "Trigger interrupt flag"] - pub fn set_tif(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + #[doc = "LPUART1 clock enable during sleep mode bit"] + pub const fn lpuart1smen(&self) -> super::vals::Lptimsmen { + let val = (self.0 >> 18usize) & 0x01; + super::vals::Lptimsmen(val as u8) } - #[doc = "Break interrupt flag"] - pub const fn bif(&self) -> bool { - let val = (self.0 >> 7usize) & 0x01; - val != 0 + #[doc = "LPUART1 clock enable during sleep mode bit"] + pub fn set_lpuart1smen(&mut self, val: super::vals::Lptimsmen) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); } - #[doc = "Break interrupt flag"] - pub fn set_bif(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + #[doc = "USART4 clock enable during Sleep mode bit"] + pub const fn usart4smen(&self) -> super::vals::Lptimsmen { + let val = (self.0 >> 19usize) & 0x01; + super::vals::Lptimsmen(val as u8) } - #[doc = "Capture/Compare 1 overcapture flag"] - pub fn ccof(&self, n: usize) -> bool { - assert!(n < 4usize); - let offs = 9usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; - val != 0 + #[doc = "USART4 clock enable during Sleep mode bit"] + pub fn set_usart4smen(&mut self, val: super::vals::Lptimsmen) { + self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); } - #[doc = "Capture/Compare 1 overcapture flag"] - pub fn set_ccof(&mut self, n: usize, val: bool) { - assert!(n < 4usize); - let offs = 9usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + #[doc = "USART5 clock enable during Sleep mode bit"] + pub const fn usart5smen(&self) -> super::vals::Lptimsmen { + let val = (self.0 >> 20usize) & 0x01; + super::vals::Lptimsmen(val as u8) } - } - impl Default for SrGp { - fn default() -> SrGp { - SrGp(0) + #[doc = "USART5 clock enable during Sleep mode bit"] + pub fn set_usart5smen(&mut self, val: super::vals::Lptimsmen) { + self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize); } - } - } -} -pub mod gpio_v2 { - use crate::generic::*; - #[doc = "General-purpose I/Os"] - #[derive(Copy, Clone)] - pub struct Gpio(pub *mut u8); - unsafe impl Send for Gpio {} - unsafe impl Sync for Gpio {} - impl Gpio { - #[doc = "GPIO port mode register"] - pub fn moder(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(0usize)) } - } - #[doc = "GPIO port output type register"] - pub fn otyper(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(4usize)) } - } - #[doc = "GPIO port output speed register"] - pub fn ospeedr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(8usize)) } - } - #[doc = "GPIO port pull-up/pull-down register"] - pub fn pupdr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(12usize)) } - } - #[doc = "GPIO port input data register"] - pub fn idr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(16usize)) } - } - #[doc = "GPIO port output data register"] - pub fn odr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(20usize)) } - } - #[doc = "GPIO port bit set/reset register"] - pub fn bsrr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(24usize)) } - } - #[doc = "GPIO port configuration lock register"] - pub fn lckr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(28usize)) } - } - #[doc = "GPIO alternate function register (low, high)"] - pub fn afr(self, n: usize) -> Reg { - assert!(n < 2usize); - unsafe { Reg::from_ptr(self.0.add(32usize + n * 4usize)) } - } - } - pub mod regs { - use crate::generic::*; - #[doc = "GPIO port output type register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Otyper(pub u32); - impl Otyper { - #[doc = "Port x configuration bits (y = 0..15)"] - pub fn ot(&self, n: usize) -> super::vals::Ot { - assert!(n < 16usize); - let offs = 0usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; - super::vals::Ot(val as u8) + #[doc = "I2C1 clock enable during sleep mode bit"] + pub const fn i2c1smen(&self) -> super::vals::Lptimsmen { + let val = (self.0 >> 21usize) & 0x01; + super::vals::Lptimsmen(val as u8) } - #[doc = "Port x configuration bits (y = 0..15)"] - pub fn set_ot(&mut self, n: usize, val: super::vals::Ot) { - assert!(n < 16usize); - let offs = 0usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); + #[doc = "I2C1 clock enable during sleep mode bit"] + pub fn set_i2c1smen(&mut self, val: super::vals::Lptimsmen) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); } - } - impl Default for Otyper { - fn default() -> Otyper { - Otyper(0) + #[doc = "I2C2 clock enable during sleep mode bit"] + pub const fn i2c2smen(&self) -> super::vals::Lptimsmen { + let val = (self.0 >> 22usize) & 0x01; + super::vals::Lptimsmen(val as u8) } - } - #[doc = "GPIO port pull-up/pull-down register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Pupdr(pub u32); - impl Pupdr { - #[doc = "Port x configuration bits (y = 0..15)"] - pub fn pupdr(&self, n: usize) -> super::vals::Pupdr { - assert!(n < 16usize); - let offs = 0usize + n * 2usize; - let val = (self.0 >> offs) & 0x03; - super::vals::Pupdr(val as u8) + #[doc = "I2C2 clock enable during sleep mode bit"] + pub fn set_i2c2smen(&mut self, val: super::vals::Lptimsmen) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); } - #[doc = "Port x configuration bits (y = 0..15)"] - pub fn set_pupdr(&mut self, n: usize, val: super::vals::Pupdr) { - assert!(n < 16usize); - let offs = 0usize + n * 2usize; - self.0 = (self.0 & !(0x03 << offs)) | (((val.0 as u32) & 0x03) << offs); + #[doc = "USB clock enable during sleep mode bit"] + pub const fn usbsmen(&self) -> super::vals::Lptimsmen { + let val = (self.0 >> 23usize) & 0x01; + super::vals::Lptimsmen(val as u8) } - } - impl Default for Pupdr { - fn default() -> Pupdr { - Pupdr(0) + #[doc = "USB clock enable during sleep mode bit"] + pub fn set_usbsmen(&mut self, val: super::vals::Lptimsmen) { + self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize); } - } - #[doc = "GPIO port output speed register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ospeedr(pub u32); - impl Ospeedr { - #[doc = "Port x configuration bits (y = 0..15)"] - pub fn ospeedr(&self, n: usize) -> super::vals::Ospeedr { - assert!(n < 16usize); - let offs = 0usize + n * 2usize; - let val = (self.0 >> offs) & 0x03; - super::vals::Ospeedr(val as u8) + #[doc = "Clock recovery system clock enable during sleep mode bit"] + pub const fn crssmen(&self) -> super::vals::Lptimsmen { + let val = (self.0 >> 27usize) & 0x01; + super::vals::Lptimsmen(val as u8) } - #[doc = "Port x configuration bits (y = 0..15)"] - pub fn set_ospeedr(&mut self, n: usize, val: super::vals::Ospeedr) { - assert!(n < 16usize); - let offs = 0usize + n * 2usize; - self.0 = (self.0 & !(0x03 << offs)) | (((val.0 as u32) & 0x03) << offs); + #[doc = "Clock recovery system clock enable during sleep mode bit"] + pub fn set_crssmen(&mut self, val: super::vals::Lptimsmen) { + self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize); } - } - impl Default for Ospeedr { - fn default() -> Ospeedr { - Ospeedr(0) + #[doc = "Power interface clock enable during sleep mode bit"] + pub const fn pwrsmen(&self) -> super::vals::Lptimsmen { + let val = (self.0 >> 28usize) & 0x01; + super::vals::Lptimsmen(val as u8) } - } - #[doc = "GPIO port configuration lock register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Lckr(pub u32); - impl Lckr { - #[doc = "Port x lock bit y (y= 0..15)"] - pub fn lck(&self, n: usize) -> super::vals::Lck { - assert!(n < 16usize); - let offs = 0usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; - super::vals::Lck(val as u8) + #[doc = "Power interface clock enable during sleep mode bit"] + pub fn set_pwrsmen(&mut self, val: super::vals::Lptimsmen) { + self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); } - #[doc = "Port x lock bit y (y= 0..15)"] - pub fn set_lck(&mut self, n: usize, val: super::vals::Lck) { - assert!(n < 16usize); - let offs = 0usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); + #[doc = "DAC interface clock enable during sleep mode bit"] + pub const fn dacsmen(&self) -> super::vals::Lptimsmen { + let val = (self.0 >> 29usize) & 0x01; + super::vals::Lptimsmen(val as u8) } - #[doc = "Port x lock bit y (y= 0..15)"] - pub const fn lckk(&self) -> super::vals::Lckk { - let val = (self.0 >> 16usize) & 0x01; - super::vals::Lckk(val as u8) + #[doc = "DAC interface clock enable during sleep mode bit"] + pub fn set_dacsmen(&mut self, val: super::vals::Lptimsmen) { + self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); } - #[doc = "Port x lock bit y (y= 0..15)"] - pub fn set_lckk(&mut self, val: super::vals::Lckk) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + #[doc = "2C3 clock enable during Sleep mode bit"] + pub const fn i2c3smen(&self) -> super::vals::Lptimsmen { + let val = (self.0 >> 30usize) & 0x01; + super::vals::Lptimsmen(val as u8) } - } - impl Default for Lckr { - fn default() -> Lckr { - Lckr(0) + #[doc = "2C3 clock enable during Sleep mode bit"] + pub fn set_i2c3smen(&mut self, val: super::vals::Lptimsmen) { + self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize); } - } - #[doc = "GPIO port input data register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Idr(pub u32); - impl Idr { - #[doc = "Port input data (y = 0..15)"] - pub fn idr(&self, n: usize) -> super::vals::Idr { - assert!(n < 16usize); - let offs = 0usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; - super::vals::Idr(val as u8) + #[doc = "Low power timer clock enable during sleep mode bit"] + pub const fn lptim1smen(&self) -> super::vals::Lptimsmen { + let val = (self.0 >> 31usize) & 0x01; + super::vals::Lptimsmen(val as u8) } - #[doc = "Port input data (y = 0..15)"] - pub fn set_idr(&mut self, n: usize, val: super::vals::Idr) { - assert!(n < 16usize); - let offs = 0usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); + #[doc = "Low power timer clock enable during sleep mode bit"] + pub fn set_lptim1smen(&mut self, val: super::vals::Lptimsmen) { + self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); } } - impl Default for Idr { - fn default() -> Idr { - Idr(0) + impl Default for Apb1smenr { + fn default() -> Apb1smenr { + Apb1smenr(0) } } - #[doc = "GPIO alternate function register"] + #[doc = "Clock configuration register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Afr(pub u32); - impl Afr { - #[doc = "Alternate function selection for port x bit y (y = 0..15)"] - pub fn afr(&self, n: usize) -> super::vals::Afr { - assert!(n < 8usize); - let offs = 0usize + n * 4usize; - let val = (self.0 >> offs) & 0x0f; - super::vals::Afr(val as u8) + pub struct Cfgr(pub u32); + impl Cfgr { + #[doc = "System clock switch"] + pub const fn sw(&self) -> super::vals::Sw { + let val = (self.0 >> 0usize) & 0x03; + super::vals::Sw(val as u8) } - #[doc = "Alternate function selection for port x bit y (y = 0..15)"] - pub fn set_afr(&mut self, n: usize, val: super::vals::Afr) { - assert!(n < 8usize); - let offs = 0usize + n * 4usize; - self.0 = (self.0 & !(0x0f << offs)) | (((val.0 as u32) & 0x0f) << offs); + #[doc = "System clock switch"] + pub fn set_sw(&mut self, val: super::vals::Sw) { + self.0 = (self.0 & !(0x03 << 0usize)) | (((val.0 as u32) & 0x03) << 0usize); } - } - impl Default for Afr { - fn default() -> Afr { - Afr(0) + #[doc = "System clock switch status"] + pub const fn sws(&self) -> super::vals::Sws { + let val = (self.0 >> 2usize) & 0x03; + super::vals::Sws(val as u8) } - } - #[doc = "GPIO port output data register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Odr(pub u32); - impl Odr { - #[doc = "Port output data (y = 0..15)"] - pub fn odr(&self, n: usize) -> super::vals::Odr { - assert!(n < 16usize); - let offs = 0usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; - super::vals::Odr(val as u8) + #[doc = "System clock switch status"] + pub fn set_sws(&mut self, val: super::vals::Sws) { + self.0 = (self.0 & !(0x03 << 2usize)) | (((val.0 as u32) & 0x03) << 2usize); } - #[doc = "Port output data (y = 0..15)"] - pub fn set_odr(&mut self, n: usize, val: super::vals::Odr) { - assert!(n < 16usize); - let offs = 0usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); + #[doc = "AHB prescaler"] + pub const fn hpre(&self) -> super::vals::Hpre { + let val = (self.0 >> 4usize) & 0x0f; + super::vals::Hpre(val as u8) } - } - impl Default for Odr { - fn default() -> Odr { - Odr(0) + #[doc = "AHB prescaler"] + pub fn set_hpre(&mut self, val: super::vals::Hpre) { + self.0 = (self.0 & !(0x0f << 4usize)) | (((val.0 as u32) & 0x0f) << 4usize); } - } - #[doc = "GPIO port mode register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Moder(pub u32); - impl Moder { - #[doc = "Port x configuration bits (y = 0..15)"] - pub fn moder(&self, n: usize) -> super::vals::Moder { - assert!(n < 16usize); - let offs = 0usize + n * 2usize; - let val = (self.0 >> offs) & 0x03; - super::vals::Moder(val as u8) + #[doc = "APB low-speed prescaler (APB1)"] + pub fn ppre(&self, n: usize) -> super::vals::Ppre { + assert!(n < 2usize); + let offs = 8usize + n * 3usize; + let val = (self.0 >> offs) & 0x07; + super::vals::Ppre(val as u8) } - #[doc = "Port x configuration bits (y = 0..15)"] - pub fn set_moder(&mut self, n: usize, val: super::vals::Moder) { - assert!(n < 16usize); - let offs = 0usize + n * 2usize; - self.0 = (self.0 & !(0x03 << offs)) | (((val.0 as u32) & 0x03) << offs); + #[doc = "APB low-speed prescaler (APB1)"] + pub fn set_ppre(&mut self, n: usize, val: super::vals::Ppre) { + assert!(n < 2usize); + let offs = 8usize + n * 3usize; + self.0 = (self.0 & !(0x07 << offs)) | (((val.0 as u32) & 0x07) << offs); } - } - impl Default for Moder { - fn default() -> Moder { - Moder(0) + #[doc = "Wake-up from stop clock selection"] + pub const fn stopwuck(&self) -> super::vals::Stopwuck { + let val = (self.0 >> 15usize) & 0x01; + super::vals::Stopwuck(val as u8) } - } - #[doc = "GPIO port bit set/reset register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Bsrr(pub u32); - impl Bsrr { - #[doc = "Port x set bit y (y= 0..15)"] - pub fn bs(&self, n: usize) -> bool { - assert!(n < 16usize); - let offs = 0usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; - val != 0 + #[doc = "Wake-up from stop clock selection"] + pub fn set_stopwuck(&mut self, val: super::vals::Stopwuck) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); } - #[doc = "Port x set bit y (y= 0..15)"] - pub fn set_bs(&mut self, n: usize, val: bool) { - assert!(n < 16usize); - let offs = 0usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + #[doc = "PLL entry clock source"] + pub const fn pllsrc(&self) -> super::vals::Pllsrc { + let val = (self.0 >> 16usize) & 0x01; + super::vals::Pllsrc(val as u8) } - #[doc = "Port x set bit y (y= 0..15)"] - pub fn br(&self, n: usize) -> bool { - assert!(n < 16usize); - let offs = 16usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; - val != 0 + #[doc = "PLL entry clock source"] + pub fn set_pllsrc(&mut self, val: super::vals::Pllsrc) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); } - #[doc = "Port x set bit y (y= 0..15)"] - pub fn set_br(&mut self, n: usize, val: bool) { - assert!(n < 16usize); - let offs = 16usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + #[doc = "PLL multiplication factor"] + pub const fn pllmul(&self) -> super::vals::Pllmul { + let val = (self.0 >> 18usize) & 0x0f; + super::vals::Pllmul(val as u8) } - } - impl Default for Bsrr { - fn default() -> Bsrr { - Bsrr(0) + #[doc = "PLL multiplication factor"] + pub fn set_pllmul(&mut self, val: super::vals::Pllmul) { + self.0 = (self.0 & !(0x0f << 18usize)) | (((val.0 as u32) & 0x0f) << 18usize); + } + #[doc = "PLL output division"] + pub const fn plldiv(&self) -> super::vals::Plldiv { + let val = (self.0 >> 22usize) & 0x03; + super::vals::Plldiv(val as u8) + } + #[doc = "PLL output division"] + pub fn set_plldiv(&mut self, val: super::vals::Plldiv) { + self.0 = (self.0 & !(0x03 << 22usize)) | (((val.0 as u32) & 0x03) << 22usize); + } + #[doc = "Microcontroller clock output selection"] + pub const fn mcosel(&self) -> super::vals::Mcosel { + let val = (self.0 >> 24usize) & 0x0f; + super::vals::Mcosel(val as u8) + } + #[doc = "Microcontroller clock output selection"] + pub fn set_mcosel(&mut self, val: super::vals::Mcosel) { + self.0 = (self.0 & !(0x0f << 24usize)) | (((val.0 as u32) & 0x0f) << 24usize); + } + #[doc = "Microcontroller clock output prescaler"] + pub const fn mcopre(&self) -> super::vals::Mcopre { + let val = (self.0 >> 28usize) & 0x07; + super::vals::Mcopre(val as u8) + } + #[doc = "Microcontroller clock output prescaler"] + pub fn set_mcopre(&mut self, val: super::vals::Mcopre) { + self.0 = (self.0 & !(0x07 << 28usize)) | (((val.0 as u32) & 0x07) << 28usize); } } - } - pub mod vals { - use crate::generic::*; - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Idr(pub u8); - impl Idr { - #[doc = "Input is logic low"] - pub const LOW: Self = Self(0); - #[doc = "Input is logic high"] - pub const HIGH: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ospeedr(pub u8); - impl Ospeedr { - #[doc = "Low speed"] - pub const LOWSPEED: Self = Self(0); - #[doc = "Medium speed"] - pub const MEDIUMSPEED: Self = Self(0x01); - #[doc = "High speed"] - pub const HIGHSPEED: Self = Self(0x02); - #[doc = "Very high speed"] - pub const VERYHIGHSPEED: Self = Self(0x03); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lckk(pub u8); - impl Lckk { - #[doc = "Port configuration lock key not active"] - pub const NOTACTIVE: Self = Self(0); - #[doc = "Port configuration lock key active"] - pub const ACTIVE: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ot(pub u8); - impl Ot { - #[doc = "Output push-pull (reset state)"] - pub const PUSHPULL: Self = Self(0); - #[doc = "Output open-drain"] - pub const OPENDRAIN: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lck(pub u8); - impl Lck { - #[doc = "Port configuration not locked"] - pub const UNLOCKED: Self = Self(0); - #[doc = "Port configuration locked"] - pub const LOCKED: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Afr(pub u8); - impl Afr { - #[doc = "AF0"] - pub const AF0: Self = Self(0); - #[doc = "AF1"] - pub const AF1: Self = Self(0x01); - #[doc = "AF2"] - pub const AF2: Self = Self(0x02); - #[doc = "AF3"] - pub const AF3: Self = Self(0x03); - #[doc = "AF4"] - pub const AF4: Self = Self(0x04); - #[doc = "AF5"] - pub const AF5: Self = Self(0x05); - #[doc = "AF6"] - pub const AF6: Self = Self(0x06); - #[doc = "AF7"] - pub const AF7: Self = Self(0x07); - #[doc = "AF8"] - pub const AF8: Self = Self(0x08); - #[doc = "AF9"] - pub const AF9: Self = Self(0x09); - #[doc = "AF10"] - pub const AF10: Self = Self(0x0a); - #[doc = "AF11"] - pub const AF11: Self = Self(0x0b); - #[doc = "AF12"] - pub const AF12: Self = Self(0x0c); - #[doc = "AF13"] - pub const AF13: Self = Self(0x0d); - #[doc = "AF14"] - pub const AF14: Self = Self(0x0e); - #[doc = "AF15"] - pub const AF15: Self = Self(0x0f); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Bsw(pub u8); - impl Bsw { - #[doc = "Sets the corresponding ODRx bit"] - pub const SET: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Moder(pub u8); - impl Moder { - #[doc = "Input mode (reset state)"] - pub const INPUT: Self = Self(0); - #[doc = "General purpose output mode"] - pub const OUTPUT: Self = Self(0x01); - #[doc = "Alternate function mode"] - pub const ALTERNATE: Self = Self(0x02); - #[doc = "Analog mode"] - pub const ANALOG: Self = Self(0x03); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Odr(pub u8); - impl Odr { - #[doc = "Set output to logic low"] - pub const LOW: Self = Self(0); - #[doc = "Set output to logic high"] - pub const HIGH: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Brw(pub u8); - impl Brw { - #[doc = "Resets the corresponding ODRx bit"] - pub const RESET: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Pupdr(pub u8); - impl Pupdr { - #[doc = "No pull-up, pull-down"] - pub const FLOATING: Self = Self(0); - #[doc = "Pull-up"] - pub const PULLUP: Self = Self(0x01); - #[doc = "Pull-down"] - pub const PULLDOWN: Self = Self(0x02); - } - } -} -pub mod syscfg_l0 { - use crate::generic::*; - #[doc = "System configuration controller"] - #[derive(Copy, Clone)] - pub struct Syscfg(pub *mut u8); - unsafe impl Send for Syscfg {} - unsafe impl Sync for Syscfg {} - impl Syscfg { - #[doc = "configuration register 1"] - pub fn cfgr1(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(0usize)) } - } - #[doc = "CFGR2"] - pub fn cfgr2(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(4usize)) } - } - #[doc = "external interrupt configuration register"] - pub fn exticr(self, n: usize) -> Reg { - assert!(n < 4usize); - unsafe { Reg::from_ptr(self.0.add(8usize + n * 4usize)) } - } - #[doc = "CFGR3"] - pub fn cfgr3(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(32usize)) } + impl Default for Cfgr { + fn default() -> Cfgr { + Cfgr(0) + } } - } - pub mod regs { - use crate::generic::*; - #[doc = "CFGR3"] + #[doc = "APB1 peripheral clock enable register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cfgr3(pub u32); - impl Cfgr3 { - #[doc = "VREFINT enable and scaler control for COMP2 enable bit"] - pub const fn en_vrefint(&self) -> bool { + pub struct Apb1enr(pub u32); + impl Apb1enr { + #[doc = "Timer2 clock enable bit"] + pub const fn tim2en(&self) -> super::vals::Lptimen { let val = (self.0 >> 0usize) & 0x01; - val != 0 - } - #[doc = "VREFINT enable and scaler control for COMP2 enable bit"] - pub fn set_en_vrefint(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + super::vals::Lptimen(val as u8) } - #[doc = "VREFINT_ADC connection bit"] - pub const fn sel_vref_out(&self) -> u8 { - let val = (self.0 >> 4usize) & 0x03; - val as u8 + #[doc = "Timer2 clock enable bit"] + pub fn set_tim2en(&mut self, val: super::vals::Lptimen) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "VREFINT_ADC connection bit"] - pub fn set_sel_vref_out(&mut self, val: u8) { - self.0 = (self.0 & !(0x03 << 4usize)) | (((val as u32) & 0x03) << 4usize); + #[doc = "Timer3 clock enable bit"] + pub const fn tim3en(&self) -> super::vals::Lptimen { + let val = (self.0 >> 1usize) & 0x01; + super::vals::Lptimen(val as u8) } - #[doc = "VREFINT reference for ADC enable bit"] - pub const fn enbuf_vrefint_adc(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; - val != 0 + #[doc = "Timer3 clock enable bit"] + pub fn set_tim3en(&mut self, val: super::vals::Lptimen) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - #[doc = "VREFINT reference for ADC enable bit"] - pub fn set_enbuf_vrefint_adc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + #[doc = "Timer 6 clock enable bit"] + pub const fn tim6en(&self) -> super::vals::Lptimen { + let val = (self.0 >> 4usize) & 0x01; + super::vals::Lptimen(val as u8) } - #[doc = "Temperature sensor reference for ADC enable bit"] - pub const fn enbuf_sensor_adc(&self) -> bool { - let val = (self.0 >> 9usize) & 0x01; - val != 0 + #[doc = "Timer 6 clock enable bit"] + pub fn set_tim6en(&mut self, val: super::vals::Lptimen) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); } - #[doc = "Temperature sensor reference for ADC enable bit"] - pub fn set_enbuf_sensor_adc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + #[doc = "Timer 7 clock enable bit"] + pub const fn tim7en(&self) -> super::vals::Lptimen { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Lptimen(val as u8) } - #[doc = "VREFINT reference for COMP2 scaler enable bit"] - pub const fn enbuf_vrefint_comp2(&self) -> bool { - let val = (self.0 >> 12usize) & 0x01; - val != 0 + #[doc = "Timer 7 clock enable bit"] + pub fn set_tim7en(&mut self, val: super::vals::Lptimen) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "VREFINT reference for COMP2 scaler enable bit"] - pub fn set_enbuf_vrefint_comp2(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); + #[doc = "Window watchdog clock enable bit"] + pub const fn wwdgen(&self) -> super::vals::Lptimen { + let val = (self.0 >> 11usize) & 0x01; + super::vals::Lptimen(val as u8) } - #[doc = "VREFINT reference for HSI48 oscillator enable bit"] - pub const fn enref_hsi48(&self) -> bool { - let val = (self.0 >> 13usize) & 0x01; - val != 0 + #[doc = "Window watchdog clock enable bit"] + pub fn set_wwdgen(&mut self, val: super::vals::Lptimen) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); } - #[doc = "VREFINT reference for HSI48 oscillator enable bit"] - pub fn set_enref_hsi48(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); + #[doc = "SPI2 clock enable bit"] + pub const fn spi2en(&self) -> super::vals::Lptimen { + let val = (self.0 >> 14usize) & 0x01; + super::vals::Lptimen(val as u8) } - #[doc = "VREFINT ready flag"] - pub const fn vrefint_rdyf(&self) -> bool { - let val = (self.0 >> 30usize) & 0x01; - val != 0 + #[doc = "SPI2 clock enable bit"] + pub fn set_spi2en(&mut self, val: super::vals::Lptimen) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); } - #[doc = "VREFINT ready flag"] - pub fn set_vrefint_rdyf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 30usize)) | (((val as u32) & 0x01) << 30usize); + #[doc = "UART2 clock enable bit"] + pub const fn usart2en(&self) -> super::vals::Lptimen { + let val = (self.0 >> 17usize) & 0x01; + super::vals::Lptimen(val as u8) } - #[doc = "SYSCFG_CFGR3 lock bit"] - pub const fn ref_lock(&self) -> bool { - let val = (self.0 >> 31usize) & 0x01; - val != 0 + #[doc = "UART2 clock enable bit"] + pub fn set_usart2en(&mut self, val: super::vals::Lptimen) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); } - #[doc = "SYSCFG_CFGR3 lock bit"] - pub fn set_ref_lock(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize); + #[doc = "LPUART1 clock enable bit"] + pub const fn lpuart1en(&self) -> super::vals::Lptimen { + let val = (self.0 >> 18usize) & 0x01; + super::vals::Lptimen(val as u8) } - } - impl Default for Cfgr3 { - fn default() -> Cfgr3 { - Cfgr3(0) + #[doc = "LPUART1 clock enable bit"] + pub fn set_lpuart1en(&mut self, val: super::vals::Lptimen) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); } - } - #[doc = "external interrupt configuration register 1-4"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Exticr(pub u32); - impl Exticr { - #[doc = "EXTI configuration bits"] - pub fn exti(&self, n: usize) -> u8 { - assert!(n < 4usize); - let offs = 0usize + n * 4usize; - let val = (self.0 >> offs) & 0x0f; - val as u8 + #[doc = "USART4 clock enable bit"] + pub const fn usart4en(&self) -> super::vals::Lptimen { + let val = (self.0 >> 19usize) & 0x01; + super::vals::Lptimen(val as u8) } - #[doc = "EXTI configuration bits"] - pub fn set_exti(&mut self, n: usize, val: u8) { - assert!(n < 4usize); - let offs = 0usize + n * 4usize; - self.0 = (self.0 & !(0x0f << offs)) | (((val as u32) & 0x0f) << offs); + #[doc = "USART4 clock enable bit"] + pub fn set_usart4en(&mut self, val: super::vals::Lptimen) { + self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); } - } - impl Default for Exticr { - fn default() -> Exticr { - Exticr(0) + #[doc = "USART5 clock enable bit"] + pub const fn usart5en(&self) -> super::vals::Lptimen { + let val = (self.0 >> 20usize) & 0x01; + super::vals::Lptimen(val as u8) } - } - #[doc = "CFGR2"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cfgr2(pub u32); - impl Cfgr2 { - #[doc = "Firewall disable bit"] - pub const fn fwdis(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; - val != 0 + #[doc = "USART5 clock enable bit"] + pub fn set_usart5en(&mut self, val: super::vals::Lptimen) { + self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize); } - #[doc = "Firewall disable bit"] - pub fn set_fwdis(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + #[doc = "I2C1 clock enable bit"] + pub const fn i2c1en(&self) -> super::vals::Lptimen { + let val = (self.0 >> 21usize) & 0x01; + super::vals::Lptimen(val as u8) } - #[doc = "Fm+ drive capability on PB6 enable bit"] - pub const fn i2c_pb6_fmp(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; - val != 0 + #[doc = "I2C1 clock enable bit"] + pub fn set_i2c1en(&mut self, val: super::vals::Lptimen) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); } - #[doc = "Fm+ drive capability on PB6 enable bit"] - pub fn set_i2c_pb6_fmp(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + #[doc = "I2C2 clock enable bit"] + pub const fn i2c2en(&self) -> super::vals::Lptimen { + let val = (self.0 >> 22usize) & 0x01; + super::vals::Lptimen(val as u8) } - #[doc = "Fm+ drive capability on PB7 enable bit"] - pub const fn i2c_pb7_fmp(&self) -> bool { - let val = (self.0 >> 9usize) & 0x01; - val != 0 + #[doc = "I2C2 clock enable bit"] + pub fn set_i2c2en(&mut self, val: super::vals::Lptimen) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); } - #[doc = "Fm+ drive capability on PB7 enable bit"] - pub fn set_i2c_pb7_fmp(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + #[doc = "USB clock enable bit"] + pub const fn usben(&self) -> super::vals::Lptimen { + let val = (self.0 >> 23usize) & 0x01; + super::vals::Lptimen(val as u8) } - #[doc = "Fm+ drive capability on PB8 enable bit"] - pub const fn i2c_pb8_fmp(&self) -> bool { - let val = (self.0 >> 10usize) & 0x01; - val != 0 + #[doc = "USB clock enable bit"] + pub fn set_usben(&mut self, val: super::vals::Lptimen) { + self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize); } - #[doc = "Fm+ drive capability on PB8 enable bit"] - pub fn set_i2c_pb8_fmp(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); + #[doc = "Clock recovery system clock enable bit"] + pub const fn crsen(&self) -> super::vals::Lptimen { + let val = (self.0 >> 27usize) & 0x01; + super::vals::Lptimen(val as u8) } - #[doc = "Fm+ drive capability on PB9 enable bit"] - pub const fn i2c_pb9_fmp(&self) -> bool { - let val = (self.0 >> 11usize) & 0x01; - val != 0 + #[doc = "Clock recovery system clock enable bit"] + pub fn set_crsen(&mut self, val: super::vals::Lptimen) { + self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize); } - #[doc = "Fm+ drive capability on PB9 enable bit"] - pub fn set_i2c_pb9_fmp(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); + #[doc = "Power interface clock enable bit"] + pub const fn pwren(&self) -> super::vals::Lptimen { + let val = (self.0 >> 28usize) & 0x01; + super::vals::Lptimen(val as u8) } - #[doc = "I2C1 Fm+ drive capability enable bit"] - pub const fn i2c1_fmp(&self) -> bool { - let val = (self.0 >> 12usize) & 0x01; - val != 0 + #[doc = "Power interface clock enable bit"] + pub fn set_pwren(&mut self, val: super::vals::Lptimen) { + self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); } - #[doc = "I2C1 Fm+ drive capability enable bit"] - pub fn set_i2c1_fmp(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); + #[doc = "DAC interface clock enable bit"] + pub const fn dacen(&self) -> super::vals::Lptimen { + let val = (self.0 >> 29usize) & 0x01; + super::vals::Lptimen(val as u8) } - #[doc = "I2C2 Fm+ drive capability enable bit"] - pub const fn i2c2_fmp(&self) -> bool { - let val = (self.0 >> 13usize) & 0x01; - val != 0 + #[doc = "DAC interface clock enable bit"] + pub fn set_dacen(&mut self, val: super::vals::Lptimen) { + self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); } - #[doc = "I2C2 Fm+ drive capability enable bit"] - pub fn set_i2c2_fmp(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); + #[doc = "I2C3 clock enable bit"] + pub const fn i2c3en(&self) -> super::vals::Lptimen { + let val = (self.0 >> 30usize) & 0x01; + super::vals::Lptimen(val as u8) } - #[doc = "I2C3 Fm+ drive capability enable bit"] - pub const fn i2c3_fmp(&self) -> bool { - let val = (self.0 >> 14usize) & 0x01; - val != 0 + #[doc = "I2C3 clock enable bit"] + pub fn set_i2c3en(&mut self, val: super::vals::Lptimen) { + self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize); } - #[doc = "I2C3 Fm+ drive capability enable bit"] - pub fn set_i2c3_fmp(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); + #[doc = "Low power timer clock enable bit"] + pub const fn lptim1en(&self) -> super::vals::Lptimen { + let val = (self.0 >> 31usize) & 0x01; + super::vals::Lptimen(val as u8) + } + #[doc = "Low power timer clock enable bit"] + pub fn set_lptim1en(&mut self, val: super::vals::Lptimen) { + self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); } } - impl Default for Cfgr2 { - fn default() -> Cfgr2 { - Cfgr2(0) + impl Default for Apb1enr { + fn default() -> Apb1enr { + Apb1enr(0) } } - #[doc = "configuration register 1"] + #[doc = "Clock interrupt enable register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cfgr1(pub u32); - impl Cfgr1 { - #[doc = "Memory mapping selection bits"] - pub const fn mem_mode(&self) -> u8 { - let val = (self.0 >> 0usize) & 0x03; - val as u8 + pub struct Cier(pub u32); + impl Cier { + #[doc = "LSI ready interrupt flag"] + pub const fn lsirdyie(&self) -> super::vals::Hsirdyie { + let val = (self.0 >> 0usize) & 0x01; + super::vals::Hsirdyie(val as u8) } - #[doc = "Memory mapping selection bits"] - pub fn set_mem_mode(&mut self, val: u8) { - self.0 = (self.0 & !(0x03 << 0usize)) | (((val as u32) & 0x03) << 0usize); + #[doc = "LSI ready interrupt flag"] + pub fn set_lsirdyie(&mut self, val: super::vals::Hsirdyie) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "User bank swapping"] - pub const fn ufb(&self) -> bool { - let val = (self.0 >> 3usize) & 0x01; - val != 0 + #[doc = "LSE ready interrupt flag"] + pub const fn lserdyie(&self) -> super::vals::Hsirdyie { + let val = (self.0 >> 1usize) & 0x01; + super::vals::Hsirdyie(val as u8) } - #[doc = "User bank swapping"] - pub fn set_ufb(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); + #[doc = "LSE ready interrupt flag"] + pub fn set_lserdyie(&mut self, val: super::vals::Hsirdyie) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - #[doc = "Boot mode selected by the boot pins status bits"] - pub const fn boot_mode(&self) -> u8 { - let val = (self.0 >> 8usize) & 0x03; - val as u8 + #[doc = "HSI16 ready interrupt flag"] + pub const fn hsi16rdyie(&self) -> super::vals::Hsirdyie { + let val = (self.0 >> 2usize) & 0x01; + super::vals::Hsirdyie(val as u8) } - #[doc = "Boot mode selected by the boot pins status bits"] - pub fn set_boot_mode(&mut self, val: u8) { - self.0 = (self.0 & !(0x03 << 8usize)) | (((val as u32) & 0x03) << 8usize); + #[doc = "HSI16 ready interrupt flag"] + pub fn set_hsi16rdyie(&mut self, val: super::vals::Hsirdyie) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); } - } - impl Default for Cfgr1 { - fn default() -> Cfgr1 { - Cfgr1(0) + #[doc = "HSE ready interrupt flag"] + pub const fn hserdyie(&self) -> super::vals::Hsirdyie { + let val = (self.0 >> 3usize) & 0x01; + super::vals::Hsirdyie(val as u8) } - } - } -} -pub mod exti_v1 { - use crate::generic::*; - #[doc = "External interrupt/event controller"] - #[derive(Copy, Clone)] - pub struct Exti(pub *mut u8); - unsafe impl Send for Exti {} - unsafe impl Sync for Exti {} - impl Exti { - #[doc = "Interrupt mask register (EXTI_IMR)"] - pub fn imr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(0usize)) } - } - #[doc = "Event mask register (EXTI_EMR)"] - pub fn emr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(4usize)) } - } - #[doc = "Rising Trigger selection register (EXTI_RTSR)"] - pub fn rtsr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(8usize)) } - } - #[doc = "Falling Trigger selection register (EXTI_FTSR)"] - pub fn ftsr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(12usize)) } - } - #[doc = "Software interrupt event register (EXTI_SWIER)"] - pub fn swier(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(16usize)) } - } - #[doc = "Pending register (EXTI_PR)"] - pub fn pr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(20usize)) } - } - } - pub mod regs { - use crate::generic::*; - #[doc = "Falling Trigger selection register (EXTI_FTSR)"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ftsr(pub u32); - impl Ftsr { - #[doc = "Falling trigger event configuration of line 0"] - pub fn tr(&self, n: usize) -> super::vals::Tr { - assert!(n < 23usize); - let offs = 0usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; - super::vals::Tr(val as u8) + #[doc = "HSE ready interrupt flag"] + pub fn set_hserdyie(&mut self, val: super::vals::Hsirdyie) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); } - #[doc = "Falling trigger event configuration of line 0"] - pub fn set_tr(&mut self, n: usize, val: super::vals::Tr) { - assert!(n < 23usize); - let offs = 0usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); + #[doc = "PLL ready interrupt flag"] + pub const fn pllrdyie(&self) -> super::vals::Hsirdyie { + let val = (self.0 >> 4usize) & 0x01; + super::vals::Hsirdyie(val as u8) } - } - impl Default for Ftsr { - fn default() -> Ftsr { - Ftsr(0) + #[doc = "PLL ready interrupt flag"] + pub fn set_pllrdyie(&mut self, val: super::vals::Hsirdyie) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); } - } - #[doc = "Software interrupt event register (EXTI_SWIER)"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Swier(pub u32); - impl Swier { - #[doc = "Software Interrupt on line 0"] - pub fn swier(&self, n: usize) -> bool { - assert!(n < 23usize); - let offs = 0usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; - val != 0 + #[doc = "MSI ready interrupt flag"] + pub const fn msirdyie(&self) -> super::vals::Hsirdyie { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Hsirdyie(val as u8) } - #[doc = "Software Interrupt on line 0"] - pub fn set_swier(&mut self, n: usize, val: bool) { - assert!(n < 23usize); - let offs = 0usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + #[doc = "MSI ready interrupt flag"] + pub fn set_msirdyie(&mut self, val: super::vals::Hsirdyie) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - } - impl Default for Swier { - fn default() -> Swier { - Swier(0) + #[doc = "HSI48 ready interrupt flag"] + pub const fn hsi48rdyie(&self) -> super::vals::Hsirdyie { + let val = (self.0 >> 6usize) & 0x01; + super::vals::Hsirdyie(val as u8) } - } - #[doc = "Event mask register (EXTI_EMR)"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Emr(pub u32); - impl Emr { - #[doc = "Event Mask on line 0"] - pub fn mr(&self, n: usize) -> super::vals::Mr { - assert!(n < 23usize); - let offs = 0usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; - super::vals::Mr(val as u8) + #[doc = "HSI48 ready interrupt flag"] + pub fn set_hsi48rdyie(&mut self, val: super::vals::Hsirdyie) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); } - #[doc = "Event Mask on line 0"] - pub fn set_mr(&mut self, n: usize, val: super::vals::Mr) { - assert!(n < 23usize); - let offs = 0usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); + #[doc = "LSE CSS interrupt flag"] + pub const fn csslse(&self) -> super::vals::Csslse { + let val = (self.0 >> 7usize) & 0x01; + super::vals::Csslse(val as u8) + } + #[doc = "LSE CSS interrupt flag"] + pub fn set_csslse(&mut self, val: super::vals::Csslse) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); } } - impl Default for Emr { - fn default() -> Emr { - Emr(0) + impl Default for Cier { + fn default() -> Cier { + Cier(0) } } - #[doc = "Pending register (EXTI_PR)"] + #[doc = "Clock configuration register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Pr(pub u32); - impl Pr { - #[doc = "Pending bit 0"] - pub fn pr(&self, n: usize) -> bool { - assert!(n < 23usize); - let offs = 0usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; + pub struct Ccipr(pub u32); + impl Ccipr { + #[doc = "USART1 clock source selection bits"] + pub const fn usart1sel(&self) -> super::vals::Lpuartsel { + let val = (self.0 >> 0usize) & 0x03; + super::vals::Lpuartsel(val as u8) + } + #[doc = "USART1 clock source selection bits"] + pub fn set_usart1sel(&mut self, val: super::vals::Lpuartsel) { + self.0 = (self.0 & !(0x03 << 0usize)) | (((val.0 as u32) & 0x03) << 0usize); + } + #[doc = "USART2 clock source selection bits"] + pub const fn usart2sel(&self) -> super::vals::Lpuartsel { + let val = (self.0 >> 2usize) & 0x03; + super::vals::Lpuartsel(val as u8) + } + #[doc = "USART2 clock source selection bits"] + pub fn set_usart2sel(&mut self, val: super::vals::Lpuartsel) { + self.0 = (self.0 & !(0x03 << 2usize)) | (((val.0 as u32) & 0x03) << 2usize); + } + #[doc = "LPUART1 clock source selection bits"] + pub const fn lpuart1sel(&self) -> super::vals::Lpuartsel { + let val = (self.0 >> 10usize) & 0x03; + super::vals::Lpuartsel(val as u8) + } + #[doc = "LPUART1 clock source selection bits"] + pub fn set_lpuart1sel(&mut self, val: super::vals::Lpuartsel) { + self.0 = (self.0 & !(0x03 << 10usize)) | (((val.0 as u32) & 0x03) << 10usize); + } + #[doc = "I2C1 clock source selection bits"] + pub const fn i2c1sel(&self) -> super::vals::Icsel { + let val = (self.0 >> 12usize) & 0x03; + super::vals::Icsel(val as u8) + } + #[doc = "I2C1 clock source selection bits"] + pub fn set_i2c1sel(&mut self, val: super::vals::Icsel) { + self.0 = (self.0 & !(0x03 << 12usize)) | (((val.0 as u32) & 0x03) << 12usize); + } + #[doc = "I2C3 clock source selection bits"] + pub const fn i2c3sel(&self) -> super::vals::Icsel { + let val = (self.0 >> 16usize) & 0x03; + super::vals::Icsel(val as u8) + } + #[doc = "I2C3 clock source selection bits"] + pub fn set_i2c3sel(&mut self, val: super::vals::Icsel) { + self.0 = (self.0 & !(0x03 << 16usize)) | (((val.0 as u32) & 0x03) << 16usize); + } + #[doc = "Low Power Timer clock source selection bits"] + pub const fn lptim1sel(&self) -> super::vals::Lptimsel { + let val = (self.0 >> 18usize) & 0x03; + super::vals::Lptimsel(val as u8) + } + #[doc = "Low Power Timer clock source selection bits"] + pub fn set_lptim1sel(&mut self, val: super::vals::Lptimsel) { + self.0 = (self.0 & !(0x03 << 18usize)) | (((val.0 as u32) & 0x03) << 18usize); + } + #[doc = "48 MHz HSI48 clock source selection bit"] + pub const fn hsi48msel(&self) -> bool { + let val = (self.0 >> 26usize) & 0x01; val != 0 } - #[doc = "Pending bit 0"] - pub fn set_pr(&mut self, n: usize, val: bool) { - assert!(n < 23usize); - let offs = 0usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + #[doc = "48 MHz HSI48 clock source selection bit"] + pub fn set_hsi48msel(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); } } - impl Default for Pr { - fn default() -> Pr { - Pr(0) + impl Default for Ccipr { + fn default() -> Ccipr { + Ccipr(0) } } - #[doc = "Rising Trigger selection register (EXTI_RTSR)"] + #[doc = "AHB peripheral clock enable register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Rtsr(pub u32); - impl Rtsr { - #[doc = "Rising trigger event configuration of line 0"] - pub fn tr(&self, n: usize) -> super::vals::Tr { - assert!(n < 23usize); - let offs = 0usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; - super::vals::Tr(val as u8) + pub struct Ahbenr(pub u32); + impl Ahbenr { + #[doc = "DMA clock enable bit"] + pub const fn dmaen(&self) -> super::vals::Crypen { + let val = (self.0 >> 0usize) & 0x01; + super::vals::Crypen(val as u8) } - #[doc = "Rising trigger event configuration of line 0"] - pub fn set_tr(&mut self, n: usize, val: super::vals::Tr) { - assert!(n < 23usize); - let offs = 0usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); + #[doc = "DMA clock enable bit"] + pub fn set_dmaen(&mut self, val: super::vals::Crypen) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - } - impl Default for Rtsr { - fn default() -> Rtsr { - Rtsr(0) + #[doc = "NVM interface clock enable bit"] + pub const fn mifen(&self) -> super::vals::Crypen { + let val = (self.0 >> 8usize) & 0x01; + super::vals::Crypen(val as u8) } - } - #[doc = "Interrupt mask register (EXTI_IMR)"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Imr(pub u32); - impl Imr { - #[doc = "Interrupt Mask on line 0"] - pub fn mr(&self, n: usize) -> super::vals::Mr { - assert!(n < 23usize); - let offs = 0usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; - super::vals::Mr(val as u8) + #[doc = "NVM interface clock enable bit"] + pub fn set_mifen(&mut self, val: super::vals::Crypen) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); } - #[doc = "Interrupt Mask on line 0"] - pub fn set_mr(&mut self, n: usize, val: super::vals::Mr) { - assert!(n < 23usize); - let offs = 0usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); + #[doc = "CRC clock enable bit"] + pub const fn crcen(&self) -> super::vals::Crypen { + let val = (self.0 >> 12usize) & 0x01; + super::vals::Crypen(val as u8) } - } - impl Default for Imr { - fn default() -> Imr { - Imr(0) + #[doc = "CRC clock enable bit"] + pub fn set_crcen(&mut self, val: super::vals::Crypen) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); } - } - } - pub mod vals { - use crate::generic::*; - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Mr(pub u8); - impl Mr { - #[doc = "Interrupt request line is masked"] - pub const MASKED: Self = Self(0); - #[doc = "Interrupt request line is unmasked"] - pub const UNMASKED: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Prw(pub u8); - impl Prw { - #[doc = "Clears pending bit"] - pub const CLEAR: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Tr(pub u8); - impl Tr { - #[doc = "Falling edge trigger is disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "Falling edge trigger is enabled"] - pub const ENABLED: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Swierw(pub u8); - impl Swierw { - #[doc = "Generates an interrupt request"] - pub const PEND: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Prr(pub u8); - impl Prr { - #[doc = "No trigger request occurred"] - pub const NOTPENDING: Self = Self(0); - #[doc = "Selected trigger request occurred"] - pub const PENDING: Self = Self(0x01); - } - } -} -pub mod spi_v3 { - use crate::generic::*; - #[doc = "Serial peripheral interface"] - #[derive(Copy, Clone)] - pub struct Spi(pub *mut u8); - unsafe impl Send for Spi {} - unsafe impl Sync for Spi {} - impl Spi { - #[doc = "control register 1"] - pub fn cr1(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(0usize)) } - } - #[doc = "control register 2"] - pub fn cr2(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(4usize)) } - } - #[doc = "configuration register 1"] - pub fn cfg1(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(8usize)) } - } - #[doc = "configuration register 2"] - pub fn cfg2(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(12usize)) } - } - #[doc = "Interrupt Enable Register"] - pub fn ier(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(16usize)) } - } - #[doc = "Status Register"] - pub fn sr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(20usize)) } - } - #[doc = "Interrupt/Status Flags Clear Register"] - pub fn ifcr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(24usize)) } - } - #[doc = "Transmit Data Register"] - pub fn txdr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(32usize)) } - } - #[doc = "Receive Data Register"] - pub fn rxdr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(48usize)) } - } - #[doc = "Polynomial Register"] - pub fn crcpoly(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(64usize)) } - } - #[doc = "Transmitter CRC Register"] - pub fn txcrc(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(68usize)) } - } - #[doc = "Receiver CRC Register"] - pub fn rxcrc(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(72usize)) } - } - #[doc = "Underrun Data Register"] - pub fn udrdr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(76usize)) } - } - } - pub mod regs { - use crate::generic::*; - #[doc = "Underrun Data Register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Udrdr(pub u32); - impl Udrdr { - #[doc = "Data at slave underrun condition"] - pub const fn udrdr(&self) -> u32 { - let val = (self.0 >> 0usize) & 0xffff_ffff; - val as u32 + #[doc = "Touch Sensing clock enable bit"] + pub const fn touchen(&self) -> super::vals::Crypen { + let val = (self.0 >> 16usize) & 0x01; + super::vals::Crypen(val as u8) } - #[doc = "Data at slave underrun condition"] - pub fn set_udrdr(&mut self, val: u32) { - self.0 = - (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + #[doc = "Touch Sensing clock enable bit"] + pub fn set_touchen(&mut self, val: super::vals::Crypen) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); } - } - impl Default for Udrdr { - fn default() -> Udrdr { - Udrdr(0) + #[doc = "Random Number Generator clock enable bit"] + pub const fn rngen(&self) -> super::vals::Crypen { + let val = (self.0 >> 20usize) & 0x01; + super::vals::Crypen(val as u8) } - } - #[doc = "Transmit Data Register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Txdr(pub u32); - impl Txdr { - #[doc = "Transmit data register"] - pub const fn txdr(&self) -> u32 { - let val = (self.0 >> 0usize) & 0xffff_ffff; - val as u32 + #[doc = "Random Number Generator clock enable bit"] + pub fn set_rngen(&mut self, val: super::vals::Crypen) { + self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize); } - #[doc = "Transmit data register"] - pub fn set_txdr(&mut self, val: u32) { - self.0 = - (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + #[doc = "Crypto clock enable bit"] + pub const fn crypen(&self) -> super::vals::Crypen { + let val = (self.0 >> 24usize) & 0x01; + super::vals::Crypen(val as u8) + } + #[doc = "Crypto clock enable bit"] + pub fn set_crypen(&mut self, val: super::vals::Crypen) { + self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); } } - impl Default for Txdr { - fn default() -> Txdr { - Txdr(0) + impl Default for Ahbenr { + fn default() -> Ahbenr { + Ahbenr(0) } } - #[doc = "Interrupt Enable Register"] + #[doc = "APB2 peripheral clock enable register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ier(pub u32); - impl Ier { - #[doc = "RXP Interrupt Enable"] - pub const fn rxpie(&self) -> bool { + pub struct Apb2enr(pub u32); + impl Apb2enr { + #[doc = "System configuration controller clock enable bit"] + pub const fn syscfgen(&self) -> super::vals::Dbgen { let val = (self.0 >> 0usize) & 0x01; - val != 0 - } - #[doc = "RXP Interrupt Enable"] - pub fn set_rxpie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); - } - #[doc = "TXP interrupt enable"] - pub const fn txpie(&self) -> bool { - let val = (self.0 >> 1usize) & 0x01; - val != 0 + super::vals::Dbgen(val as u8) } - #[doc = "TXP interrupt enable"] - pub fn set_txpie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + #[doc = "System configuration controller clock enable bit"] + pub fn set_syscfgen(&mut self, val: super::vals::Dbgen) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "DXP interrupt enabled"] - pub const fn dxpie(&self) -> bool { + #[doc = "TIM21 timer clock enable bit"] + pub const fn tim21en(&self) -> super::vals::Dbgen { let val = (self.0 >> 2usize) & 0x01; - val != 0 + super::vals::Dbgen(val as u8) } - #[doc = "DXP interrupt enabled"] - pub fn set_dxpie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); + #[doc = "TIM21 timer clock enable bit"] + pub fn set_tim21en(&mut self, val: super::vals::Dbgen) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); } - #[doc = "EOT, SUSP and TXC interrupt enable"] - pub const fn eotie(&self) -> bool { - let val = (self.0 >> 3usize) & 0x01; - val != 0 + #[doc = "TIM22 timer clock enable bit"] + pub const fn tim22en(&self) -> super::vals::Dbgen { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Dbgen(val as u8) } - #[doc = "EOT, SUSP and TXC interrupt enable"] - pub fn set_eotie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); + #[doc = "TIM22 timer clock enable bit"] + pub fn set_tim22en(&mut self, val: super::vals::Dbgen) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "TXTFIE interrupt enable"] - pub const fn txtfie(&self) -> bool { - let val = (self.0 >> 4usize) & 0x01; - val != 0 - } - #[doc = "TXTFIE interrupt enable"] - pub fn set_txtfie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); - } - #[doc = "UDR interrupt enable"] - pub const fn udrie(&self) -> bool { - let val = (self.0 >> 5usize) & 0x01; - val != 0 - } - #[doc = "UDR interrupt enable"] - pub fn set_udrie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); - } - #[doc = "OVR interrupt enable"] - pub const fn ovrie(&self) -> bool { - let val = (self.0 >> 6usize) & 0x01; - val != 0 - } - #[doc = "OVR interrupt enable"] - pub fn set_ovrie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); - } - #[doc = "CRC Interrupt enable"] - pub const fn crceie(&self) -> bool { + #[doc = "MiFaRe Firewall clock enable bit"] + pub const fn mifien(&self) -> super::vals::Dbgen { let val = (self.0 >> 7usize) & 0x01; - val != 0 - } - #[doc = "CRC Interrupt enable"] - pub fn set_crceie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); - } - #[doc = "TIFRE interrupt enable"] - pub const fn tifreie(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; - val != 0 + super::vals::Dbgen(val as u8) } - #[doc = "TIFRE interrupt enable"] - pub fn set_tifreie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + #[doc = "MiFaRe Firewall clock enable bit"] + pub fn set_mifien(&mut self, val: super::vals::Dbgen) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); } - #[doc = "Mode Fault interrupt enable"] - pub const fn modfie(&self) -> bool { + #[doc = "ADC clock enable bit"] + pub const fn adcen(&self) -> super::vals::Dbgen { let val = (self.0 >> 9usize) & 0x01; - val != 0 + super::vals::Dbgen(val as u8) } - #[doc = "Mode Fault interrupt enable"] - pub fn set_modfie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + #[doc = "ADC clock enable bit"] + pub fn set_adcen(&mut self, val: super::vals::Dbgen) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); } - #[doc = "Additional number of transactions reload interrupt enable"] - pub const fn tserfie(&self) -> bool { - let val = (self.0 >> 10usize) & 0x01; - val != 0 + #[doc = "SPI1 clock enable bit"] + pub const fn spi1en(&self) -> super::vals::Dbgen { + let val = (self.0 >> 12usize) & 0x01; + super::vals::Dbgen(val as u8) } - #[doc = "Additional number of transactions reload interrupt enable"] - pub fn set_tserfie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); + #[doc = "SPI1 clock enable bit"] + pub fn set_spi1en(&mut self, val: super::vals::Dbgen) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); } - } - impl Default for Ier { - fn default() -> Ier { - Ier(0) + #[doc = "USART1 clock enable bit"] + pub const fn usart1en(&self) -> super::vals::Dbgen { + let val = (self.0 >> 14usize) & 0x01; + super::vals::Dbgen(val as u8) } - } - #[doc = "Receive Data Register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Rxdr(pub u32); - impl Rxdr { - #[doc = "Receive data register"] - pub const fn rxdr(&self) -> u32 { - let val = (self.0 >> 0usize) & 0xffff_ffff; - val as u32 + #[doc = "USART1 clock enable bit"] + pub fn set_usart1en(&mut self, val: super::vals::Dbgen) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); } - #[doc = "Receive data register"] - pub fn set_rxdr(&mut self, val: u32) { - self.0 = - (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + #[doc = "DBG clock enable bit"] + pub const fn dbgen(&self) -> super::vals::Dbgen { + let val = (self.0 >> 22usize) & 0x01; + super::vals::Dbgen(val as u8) + } + #[doc = "DBG clock enable bit"] + pub fn set_dbgen(&mut self, val: super::vals::Dbgen) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); } } - impl Default for Rxdr { - fn default() -> Rxdr { - Rxdr(0) + impl Default for Apb2enr { + fn default() -> Apb2enr { + Apb2enr(0) } } - #[doc = "control register 1"] + #[doc = "Clock interrupt clear register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr1(pub u32); - impl Cr1 { - #[doc = "Serial Peripheral Enable"] - pub const fn spe(&self) -> bool { + pub struct Cicr(pub u32); + impl Cicr { + #[doc = "LSI ready Interrupt clear"] + pub const fn lsirdyc(&self) -> bool { let val = (self.0 >> 0usize) & 0x01; val != 0 } - #[doc = "Serial Peripheral Enable"] - pub fn set_spe(&mut self, val: bool) { + #[doc = "LSI ready Interrupt clear"] + pub fn set_lsirdyc(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "Master automatic SUSP in Receive mode"] - pub const fn masrx(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; + #[doc = "LSE ready Interrupt clear"] + pub const fn lserdyc(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; val != 0 } - #[doc = "Master automatic SUSP in Receive mode"] - pub fn set_masrx(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + #[doc = "LSE ready Interrupt clear"] + pub fn set_lserdyc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - #[doc = "Master transfer start"] - pub const fn cstart(&self) -> bool { - let val = (self.0 >> 9usize) & 0x01; + #[doc = "HSI16 ready Interrupt clear"] + pub const fn hsi16rdyc(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; val != 0 } - #[doc = "Master transfer start"] - pub fn set_cstart(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + #[doc = "HSI16 ready Interrupt clear"] + pub fn set_hsi16rdyc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); } - #[doc = "Master SUSPend request"] - pub const fn csusp(&self) -> bool { - let val = (self.0 >> 10usize) & 0x01; + #[doc = "HSE ready Interrupt clear"] + pub const fn hserdyc(&self) -> bool { + let val = (self.0 >> 3usize) & 0x01; val != 0 } - #[doc = "Master SUSPend request"] - pub fn set_csusp(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); - } - #[doc = "Rx/Tx direction at Half-duplex mode"] - pub const fn hddir(&self) -> super::vals::Hddir { - let val = (self.0 >> 11usize) & 0x01; - super::vals::Hddir(val as u8) - } - #[doc = "Rx/Tx direction at Half-duplex mode"] - pub fn set_hddir(&mut self, val: super::vals::Hddir) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); + #[doc = "HSE ready Interrupt clear"] + pub fn set_hserdyc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); } - #[doc = "Internal SS signal input level"] - pub const fn ssi(&self) -> bool { - let val = (self.0 >> 12usize) & 0x01; + #[doc = "PLL ready Interrupt clear"] + pub const fn pllrdyc(&self) -> bool { + let val = (self.0 >> 4usize) & 0x01; val != 0 } - #[doc = "Internal SS signal input level"] - pub fn set_ssi(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); + #[doc = "PLL ready Interrupt clear"] + pub fn set_pllrdyc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); } - #[doc = "32-bit CRC polynomial configuration"] - pub const fn crc33_17(&self) -> super::vals::Crc { - let val = (self.0 >> 13usize) & 0x01; - super::vals::Crc(val as u8) + #[doc = "MSI ready Interrupt clear"] + pub const fn msirdyc(&self) -> bool { + let val = (self.0 >> 5usize) & 0x01; + val != 0 } - #[doc = "32-bit CRC polynomial configuration"] - pub fn set_crc33_17(&mut self, val: super::vals::Crc) { - self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize); + #[doc = "MSI ready Interrupt clear"] + pub fn set_msirdyc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); } - #[doc = "CRC calculation initialization pattern control for receiver"] - pub const fn rcrcini(&self) -> super::vals::Rcrcini { - let val = (self.0 >> 14usize) & 0x01; - super::vals::Rcrcini(val as u8) + #[doc = "HSI48 ready Interrupt clear"] + pub const fn hsi48rdyc(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 } - #[doc = "CRC calculation initialization pattern control for receiver"] - pub fn set_rcrcini(&mut self, val: super::vals::Rcrcini) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); + #[doc = "HSI48 ready Interrupt clear"] + pub fn set_hsi48rdyc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - #[doc = "CRC calculation initialization pattern control for transmitter"] - pub const fn tcrcini(&self) -> super::vals::Tcrcini { - let val = (self.0 >> 15usize) & 0x01; - super::vals::Tcrcini(val as u8) + #[doc = "LSE Clock Security System Interrupt clear"] + pub const fn csslsec(&self) -> bool { + let val = (self.0 >> 7usize) & 0x01; + val != 0 } - #[doc = "CRC calculation initialization pattern control for transmitter"] - pub fn set_tcrcini(&mut self, val: super::vals::Tcrcini) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + #[doc = "LSE Clock Security System Interrupt clear"] + pub fn set_csslsec(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); } - #[doc = "Locking the AF configuration of associated IOs"] - pub const fn iolock(&self) -> bool { - let val = (self.0 >> 16usize) & 0x01; + #[doc = "Clock Security System Interrupt clear"] + pub const fn csshsec(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; val != 0 } - #[doc = "Locking the AF configuration of associated IOs"] - pub fn set_iolock(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + #[doc = "Clock Security System Interrupt clear"] + pub fn set_csshsec(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); } } - impl Default for Cr1 { - fn default() -> Cr1 { - Cr1(0) + impl Default for Cicr { + fn default() -> Cicr { + Cicr(0) } } - #[doc = "Interrupt/Status Flags Clear Register"] + #[doc = "GPIO reset register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ifcr(pub u32); - impl Ifcr { - #[doc = "End Of Transfer flag clear"] - pub const fn eotc(&self) -> bool { - let val = (self.0 >> 3usize) & 0x01; - val != 0 + pub struct Ioprstr(pub u32); + impl Ioprstr { + #[doc = "I/O port A reset"] + pub const fn ioparst(&self) -> super::vals::Iophrst { + let val = (self.0 >> 0usize) & 0x01; + super::vals::Iophrst(val as u8) } - #[doc = "End Of Transfer flag clear"] - pub fn set_eotc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); - } - #[doc = "Transmission Transfer Filled flag clear"] - pub const fn txtfc(&self) -> bool { - let val = (self.0 >> 4usize) & 0x01; - val != 0 - } - #[doc = "Transmission Transfer Filled flag clear"] - pub fn set_txtfc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); - } - #[doc = "Underrun flag clear"] - pub const fn udrc(&self) -> bool { - let val = (self.0 >> 5usize) & 0x01; - val != 0 - } - #[doc = "Underrun flag clear"] - pub fn set_udrc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); - } - #[doc = "Overrun flag clear"] - pub const fn ovrc(&self) -> bool { - let val = (self.0 >> 6usize) & 0x01; - val != 0 - } - #[doc = "Overrun flag clear"] - pub fn set_ovrc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + #[doc = "I/O port A reset"] + pub fn set_ioparst(&mut self, val: super::vals::Iophrst) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "CRC Error flag clear"] - pub const fn crcec(&self) -> bool { - let val = (self.0 >> 7usize) & 0x01; - val != 0 + #[doc = "I/O port B reset"] + pub const fn iopbrst(&self) -> super::vals::Iophrst { + let val = (self.0 >> 1usize) & 0x01; + super::vals::Iophrst(val as u8) } - #[doc = "CRC Error flag clear"] - pub fn set_crcec(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + #[doc = "I/O port B reset"] + pub fn set_iopbrst(&mut self, val: super::vals::Iophrst) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - #[doc = "TI frame format error flag clear"] - pub const fn tifrec(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; - val != 0 + #[doc = "I/O port A reset"] + pub const fn iopcrst(&self) -> super::vals::Iophrst { + let val = (self.0 >> 2usize) & 0x01; + super::vals::Iophrst(val as u8) } - #[doc = "TI frame format error flag clear"] - pub fn set_tifrec(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + #[doc = "I/O port A reset"] + pub fn set_iopcrst(&mut self, val: super::vals::Iophrst) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); } - #[doc = "Mode Fault flag clear"] - pub const fn modfc(&self) -> bool { - let val = (self.0 >> 9usize) & 0x01; - val != 0 + #[doc = "I/O port D reset"] + pub const fn iopdrst(&self) -> super::vals::Iophrst { + let val = (self.0 >> 3usize) & 0x01; + super::vals::Iophrst(val as u8) } - #[doc = "Mode Fault flag clear"] - pub fn set_modfc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + #[doc = "I/O port D reset"] + pub fn set_iopdrst(&mut self, val: super::vals::Iophrst) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); } - #[doc = "TSERFC flag clear"] - pub const fn tserfc(&self) -> bool { - let val = (self.0 >> 10usize) & 0x01; - val != 0 + #[doc = "I/O port E reset"] + pub const fn ioperst(&self) -> super::vals::Iophrst { + let val = (self.0 >> 4usize) & 0x01; + super::vals::Iophrst(val as u8) } - #[doc = "TSERFC flag clear"] - pub fn set_tserfc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); + #[doc = "I/O port E reset"] + pub fn set_ioperst(&mut self, val: super::vals::Iophrst) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); } - #[doc = "SUSPend flag clear"] - pub const fn suspc(&self) -> bool { - let val = (self.0 >> 11usize) & 0x01; - val != 0 + #[doc = "I/O port H reset"] + pub const fn iophrst(&self) -> super::vals::Iophrst { + let val = (self.0 >> 7usize) & 0x01; + super::vals::Iophrst(val as u8) } - #[doc = "SUSPend flag clear"] - pub fn set_suspc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); + #[doc = "I/O port H reset"] + pub fn set_iophrst(&mut self, val: super::vals::Iophrst) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); } } - impl Default for Ifcr { - fn default() -> Ifcr { - Ifcr(0) + impl Default for Ioprstr { + fn default() -> Ioprstr { + Ioprstr(0) } } - #[doc = "configuration register 2"] + #[doc = "Control and status register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cfg2(pub u32); - impl Cfg2 { - #[doc = "Master SS Idleness"] - pub const fn mssi(&self) -> u8 { - let val = (self.0 >> 0usize) & 0x0f; - val as u8 + pub struct Csr(pub u32); + impl Csr { + #[doc = "Internal low-speed oscillator enable"] + pub const fn lsion(&self) -> super::vals::Csslseon { + let val = (self.0 >> 0usize) & 0x01; + super::vals::Csslseon(val as u8) } - #[doc = "Master SS Idleness"] - pub fn set_mssi(&mut self, val: u8) { - self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize); + #[doc = "Internal low-speed oscillator enable"] + pub fn set_lsion(&mut self, val: super::vals::Csslseon) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "Master Inter-Data Idleness"] - pub const fn midi(&self) -> u8 { - let val = (self.0 >> 4usize) & 0x0f; - val as u8 + #[doc = "Internal low-speed oscillator ready bit"] + pub const fn lsirdy(&self) -> super::vals::Lserdy { + let val = (self.0 >> 1usize) & 0x01; + super::vals::Lserdy(val as u8) } - #[doc = "Master Inter-Data Idleness"] - pub fn set_midi(&mut self, val: u8) { - self.0 = (self.0 & !(0x0f << 4usize)) | (((val as u32) & 0x0f) << 4usize); + #[doc = "Internal low-speed oscillator ready bit"] + pub fn set_lsirdy(&mut self, val: super::vals::Lserdy) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - #[doc = "Swap functionality of MISO and MOSI pins"] - pub const fn ioswp(&self) -> bool { - let val = (self.0 >> 15usize) & 0x01; - val != 0 + #[doc = "External low-speed oscillator enable bit"] + pub const fn lseon(&self) -> super::vals::Csslseon { + let val = (self.0 >> 8usize) & 0x01; + super::vals::Csslseon(val as u8) } - #[doc = "Swap functionality of MISO and MOSI pins"] - pub fn set_ioswp(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); + #[doc = "External low-speed oscillator enable bit"] + pub fn set_lseon(&mut self, val: super::vals::Csslseon) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); } - #[doc = "SPI Communication Mode"] - pub const fn comm(&self) -> super::vals::Comm { - let val = (self.0 >> 17usize) & 0x03; - super::vals::Comm(val as u8) + #[doc = "External low-speed oscillator ready bit"] + pub const fn lserdy(&self) -> super::vals::Lserdy { + let val = (self.0 >> 9usize) & 0x01; + super::vals::Lserdy(val as u8) } - #[doc = "SPI Communication Mode"] - pub fn set_comm(&mut self, val: super::vals::Comm) { - self.0 = (self.0 & !(0x03 << 17usize)) | (((val.0 as u32) & 0x03) << 17usize); + #[doc = "External low-speed oscillator ready bit"] + pub fn set_lserdy(&mut self, val: super::vals::Lserdy) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); } - #[doc = "Serial Protocol"] - pub const fn sp(&self) -> super::vals::Sp { - let val = (self.0 >> 19usize) & 0x07; - super::vals::Sp(val as u8) + #[doc = "External low-speed oscillator bypass bit"] + pub const fn lsebyp(&self) -> super::vals::Lsebyp { + let val = (self.0 >> 10usize) & 0x01; + super::vals::Lsebyp(val as u8) } - #[doc = "Serial Protocol"] - pub fn set_sp(&mut self, val: super::vals::Sp) { - self.0 = (self.0 & !(0x07 << 19usize)) | (((val.0 as u32) & 0x07) << 19usize); + #[doc = "External low-speed oscillator bypass bit"] + pub fn set_lsebyp(&mut self, val: super::vals::Lsebyp) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); } - #[doc = "SPI Master"] - pub const fn master(&self) -> super::vals::Master { - let val = (self.0 >> 22usize) & 0x01; - super::vals::Master(val as u8) + #[doc = "LSEDRV"] + pub const fn lsedrv(&self) -> super::vals::Lsedrv { + let val = (self.0 >> 11usize) & 0x03; + super::vals::Lsedrv(val as u8) } - #[doc = "SPI Master"] - pub fn set_master(&mut self, val: super::vals::Master) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); + #[doc = "LSEDRV"] + pub fn set_lsedrv(&mut self, val: super::vals::Lsedrv) { + self.0 = (self.0 & !(0x03 << 11usize)) | (((val.0 as u32) & 0x03) << 11usize); } - #[doc = "Data frame format"] - pub const fn lsbfrst(&self) -> super::vals::Lsbfrst { - let val = (self.0 >> 23usize) & 0x01; - super::vals::Lsbfrst(val as u8) + #[doc = "CSSLSEON"] + pub const fn csslseon(&self) -> super::vals::Csslseon { + let val = (self.0 >> 13usize) & 0x01; + super::vals::Csslseon(val as u8) } - #[doc = "Data frame format"] - pub fn set_lsbfrst(&mut self, val: super::vals::Lsbfrst) { - self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize); + #[doc = "CSSLSEON"] + pub fn set_csslseon(&mut self, val: super::vals::Csslseon) { + self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize); } - #[doc = "Clock phase"] - pub const fn cpha(&self) -> super::vals::Cpha { - let val = (self.0 >> 24usize) & 0x01; - super::vals::Cpha(val as u8) + #[doc = "CSS on LSE failure detection flag"] + pub const fn csslsed(&self) -> super::vals::Csslsed { + let val = (self.0 >> 14usize) & 0x01; + super::vals::Csslsed(val as u8) } - #[doc = "Clock phase"] - pub fn set_cpha(&mut self, val: super::vals::Cpha) { - self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); + #[doc = "CSS on LSE failure detection flag"] + pub fn set_csslsed(&mut self, val: super::vals::Csslsed) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); } - #[doc = "Clock polarity"] - pub const fn cpol(&self) -> super::vals::Cpol { - let val = (self.0 >> 25usize) & 0x01; - super::vals::Cpol(val as u8) + #[doc = "RTC and LCD clock source selection bits"] + pub const fn rtcsel(&self) -> super::vals::Rtcsel { + let val = (self.0 >> 16usize) & 0x03; + super::vals::Rtcsel(val as u8) } - #[doc = "Clock polarity"] - pub fn set_cpol(&mut self, val: super::vals::Cpol) { - self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize); + #[doc = "RTC and LCD clock source selection bits"] + pub fn set_rtcsel(&mut self, val: super::vals::Rtcsel) { + self.0 = (self.0 & !(0x03 << 16usize)) | (((val.0 as u32) & 0x03) << 16usize); } - #[doc = "Software management of SS signal input"] - pub const fn ssm(&self) -> bool { - let val = (self.0 >> 26usize) & 0x01; - val != 0 + #[doc = "RTC clock enable bit"] + pub const fn rtcen(&self) -> super::vals::Rtcen { + let val = (self.0 >> 18usize) & 0x01; + super::vals::Rtcen(val as u8) } - #[doc = "Software management of SS signal input"] - pub fn set_ssm(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); + #[doc = "RTC clock enable bit"] + pub fn set_rtcen(&mut self, val: super::vals::Rtcen) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); } - #[doc = "SS input/output polarity"] - pub const fn ssiop(&self) -> super::vals::Ssiop { + #[doc = "RTC software reset bit"] + pub const fn rtcrst(&self) -> bool { + let val = (self.0 >> 19usize) & 0x01; + val != 0 + } + #[doc = "RTC software reset bit"] + pub fn set_rtcrst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize); + } + #[doc = "Remove reset flag"] + pub const fn rmvf(&self) -> bool { + let val = (self.0 >> 24usize) & 0x01; + val != 0 + } + #[doc = "Remove reset flag"] + pub fn set_rmvf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize); + } + #[doc = "OBLRSTF"] + pub const fn oblrstf(&self) -> bool { + let val = (self.0 >> 25usize) & 0x01; + val != 0 + } + #[doc = "OBLRSTF"] + pub fn set_oblrstf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize); + } + #[doc = "PIN reset flag"] + pub const fn pinrstf(&self) -> bool { + let val = (self.0 >> 26usize) & 0x01; + val != 0 + } + #[doc = "PIN reset flag"] + pub fn set_pinrstf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); + } + #[doc = "POR/PDR reset flag"] + pub const fn porrstf(&self) -> bool { + let val = (self.0 >> 27usize) & 0x01; + val != 0 + } + #[doc = "POR/PDR reset flag"] + pub fn set_porrstf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize); + } + #[doc = "Software reset flag"] + pub const fn sftrstf(&self) -> bool { let val = (self.0 >> 28usize) & 0x01; - super::vals::Ssiop(val as u8) + val != 0 } - #[doc = "SS input/output polarity"] - pub fn set_ssiop(&mut self, val: super::vals::Ssiop) { - self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); + #[doc = "Software reset flag"] + pub fn set_sftrstf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize); } - #[doc = "SS output enable"] - pub const fn ssoe(&self) -> bool { + #[doc = "Independent watchdog reset flag"] + pub const fn iwdgrstf(&self) -> bool { let val = (self.0 >> 29usize) & 0x01; val != 0 } - #[doc = "SS output enable"] - pub fn set_ssoe(&mut self, val: bool) { + #[doc = "Independent watchdog reset flag"] + pub fn set_iwdgrstf(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 29usize)) | (((val as u32) & 0x01) << 29usize); } - #[doc = "SS output management in master mode"] - pub const fn ssom(&self) -> super::vals::Ssom { + #[doc = "Window watchdog reset flag"] + pub const fn wwdgrstf(&self) -> bool { let val = (self.0 >> 30usize) & 0x01; - super::vals::Ssom(val as u8) + val != 0 } - #[doc = "SS output management in master mode"] - pub fn set_ssom(&mut self, val: super::vals::Ssom) { - self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize); + #[doc = "Window watchdog reset flag"] + pub fn set_wwdgrstf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 30usize)) | (((val as u32) & 0x01) << 30usize); } - #[doc = "Alternate function GPIOs control"] - pub const fn afcntr(&self) -> super::vals::Afcntr { + #[doc = "Low-power reset flag"] + pub const fn lpwrrstf(&self) -> bool { let val = (self.0 >> 31usize) & 0x01; - super::vals::Afcntr(val as u8) + val != 0 } - #[doc = "Alternate function GPIOs control"] - pub fn set_afcntr(&mut self, val: super::vals::Afcntr) { - self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); + #[doc = "Low-power reset flag"] + pub fn set_lpwrrstf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize); } } - impl Default for Cfg2 { - fn default() -> Cfg2 { - Cfg2(0) + impl Default for Csr { + fn default() -> Csr { + Csr(0) } } - #[doc = "configuration register 1"] + #[doc = "APB1 peripheral reset register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cfg1(pub u32); - impl Cfg1 { - #[doc = "Number of bits in at single SPI data frame"] - pub const fn dsize(&self) -> u8 { - let val = (self.0 >> 0usize) & 0x1f; - val as u8 + pub struct Apb1rstr(pub u32); + impl Apb1rstr { + #[doc = "Timer2 reset"] + pub const fn tim2rst(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 } - #[doc = "Number of bits in at single SPI data frame"] - pub fn set_dsize(&mut self, val: u8) { - self.0 = (self.0 & !(0x1f << 0usize)) | (((val as u32) & 0x1f) << 0usize); + #[doc = "Timer2 reset"] + pub fn set_tim2rst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "threshold level"] - pub const fn fthlv(&self) -> super::vals::Fthlv { - let val = (self.0 >> 5usize) & 0x0f; - super::vals::Fthlv(val as u8) + #[doc = "Timer3 reset"] + pub const fn tim3rst(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; + val != 0 } - #[doc = "threshold level"] - pub fn set_fthlv(&mut self, val: super::vals::Fthlv) { - self.0 = (self.0 & !(0x0f << 5usize)) | (((val.0 as u32) & 0x0f) << 5usize); + #[doc = "Timer3 reset"] + pub fn set_tim3rst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - #[doc = "Behavior of slave transmitter at underrun condition"] - pub const fn udrcfg(&self) -> super::vals::Udrcfg { - let val = (self.0 >> 9usize) & 0x03; - super::vals::Udrcfg(val as u8) + #[doc = "Timer 6 reset"] + pub const fn tim6rst(&self) -> bool { + let val = (self.0 >> 4usize) & 0x01; + val != 0 } - #[doc = "Behavior of slave transmitter at underrun condition"] - pub fn set_udrcfg(&mut self, val: super::vals::Udrcfg) { - self.0 = (self.0 & !(0x03 << 9usize)) | (((val.0 as u32) & 0x03) << 9usize); + #[doc = "Timer 6 reset"] + pub fn set_tim6rst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); } - #[doc = "Detection of underrun condition at slave transmitter"] - pub const fn udrdet(&self) -> super::vals::Udrdet { - let val = (self.0 >> 11usize) & 0x03; - super::vals::Udrdet(val as u8) + #[doc = "Timer 7 reset"] + pub const fn tim7rst(&self) -> bool { + let val = (self.0 >> 5usize) & 0x01; + val != 0 } - #[doc = "Detection of underrun condition at slave transmitter"] - pub fn set_udrdet(&mut self, val: super::vals::Udrdet) { - self.0 = (self.0 & !(0x03 << 11usize)) | (((val.0 as u32) & 0x03) << 11usize); + #[doc = "Timer 7 reset"] + pub fn set_tim7rst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); } - #[doc = "Rx DMA stream enable"] - pub const fn rxdmaen(&self) -> bool { + #[doc = "Window watchdog reset"] + pub const fn wwdrst(&self) -> bool { + let val = (self.0 >> 11usize) & 0x01; + val != 0 + } + #[doc = "Window watchdog reset"] + pub fn set_wwdrst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); + } + #[doc = "SPI2 reset"] + pub const fn spi2rst(&self) -> bool { let val = (self.0 >> 14usize) & 0x01; val != 0 } - #[doc = "Rx DMA stream enable"] - pub fn set_rxdmaen(&mut self, val: bool) { + #[doc = "SPI2 reset"] + pub fn set_spi2rst(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); } - #[doc = "Tx DMA stream enable"] - pub const fn txdmaen(&self) -> bool { - let val = (self.0 >> 15usize) & 0x01; + #[doc = "UART2 reset"] + pub const fn lpuart12rst(&self) -> bool { + let val = (self.0 >> 17usize) & 0x01; val != 0 } - #[doc = "Tx DMA stream enable"] - pub fn set_txdmaen(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); + #[doc = "UART2 reset"] + pub fn set_lpuart12rst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); } - #[doc = "Length of CRC frame to be transacted and compared"] - pub const fn crcsize(&self) -> u8 { - let val = (self.0 >> 16usize) & 0x1f; - val as u8 + #[doc = "LPUART1 reset"] + pub const fn lpuart1rst(&self) -> bool { + let val = (self.0 >> 18usize) & 0x01; + val != 0 } - #[doc = "Length of CRC frame to be transacted and compared"] - pub fn set_crcsize(&mut self, val: u8) { - self.0 = (self.0 & !(0x1f << 16usize)) | (((val as u32) & 0x1f) << 16usize); + #[doc = "LPUART1 reset"] + pub fn set_lpuart1rst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize); } - #[doc = "Hardware CRC computation enable"] - pub const fn crcen(&self) -> bool { - let val = (self.0 >> 22usize) & 0x01; + #[doc = "USART4 reset"] + pub const fn usart4rst(&self) -> bool { + let val = (self.0 >> 19usize) & 0x01; val != 0 } - #[doc = "Hardware CRC computation enable"] - pub fn set_crcen(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); + #[doc = "USART4 reset"] + pub fn set_usart4rst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize); } - #[doc = "Master baud rate"] - pub const fn mbr(&self) -> super::vals::Mbr { - let val = (self.0 >> 28usize) & 0x07; - super::vals::Mbr(val as u8) + #[doc = "USART5 reset"] + pub const fn usart5rst(&self) -> bool { + let val = (self.0 >> 20usize) & 0x01; + val != 0 } - #[doc = "Master baud rate"] - pub fn set_mbr(&mut self, val: super::vals::Mbr) { - self.0 = (self.0 & !(0x07 << 28usize)) | (((val.0 as u32) & 0x07) << 28usize); + #[doc = "USART5 reset"] + pub fn set_usart5rst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize); } - } - impl Default for Cfg1 { - fn default() -> Cfg1 { - Cfg1(0) + #[doc = "I2C1 reset"] + pub const fn i2c1rst(&self) -> bool { + let val = (self.0 >> 21usize) & 0x01; + val != 0 } - } - #[doc = "Polynomial Register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Crcpoly(pub u32); - impl Crcpoly { - #[doc = "CRC polynomial register"] - pub const fn crcpoly(&self) -> u32 { - let val = (self.0 >> 0usize) & 0xffff_ffff; - val as u32 + #[doc = "I2C1 reset"] + pub fn set_i2c1rst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); } - #[doc = "CRC polynomial register"] - pub fn set_crcpoly(&mut self, val: u32) { - self.0 = - (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + #[doc = "I2C2 reset"] + pub const fn i2c2rst(&self) -> bool { + let val = (self.0 >> 22usize) & 0x01; + val != 0 } - } - impl Default for Crcpoly { - fn default() -> Crcpoly { - Crcpoly(0) + #[doc = "I2C2 reset"] + pub fn set_i2c2rst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); } - } - #[doc = "Transmitter CRC Register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Txcrc(pub u32); - impl Txcrc { - #[doc = "CRC register for transmitter"] - pub const fn txcrc(&self) -> u32 { - let val = (self.0 >> 0usize) & 0xffff_ffff; - val as u32 + #[doc = "USB reset"] + pub const fn usbrst(&self) -> bool { + let val = (self.0 >> 23usize) & 0x01; + val != 0 } - #[doc = "CRC register for transmitter"] - pub fn set_txcrc(&mut self, val: u32) { - self.0 = - (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + #[doc = "USB reset"] + pub fn set_usbrst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize); } - } - impl Default for Txcrc { - fn default() -> Txcrc { - Txcrc(0) + #[doc = "Clock recovery system reset"] + pub const fn crsrst(&self) -> bool { + let val = (self.0 >> 27usize) & 0x01; + val != 0 } - } - #[doc = "control register 2"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr2(pub u32); - impl Cr2 { - #[doc = "Number of data at current transfer"] - pub const fn tsize(&self) -> u16 { - let val = (self.0 >> 0usize) & 0xffff; - val as u16 + #[doc = "Clock recovery system reset"] + pub fn set_crsrst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize); } - #[doc = "Number of data at current transfer"] - pub fn set_tsize(&mut self, val: u16) { - self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); + #[doc = "Power interface reset"] + pub const fn pwrrst(&self) -> bool { + let val = (self.0 >> 28usize) & 0x01; + val != 0 } - #[doc = "Number of data transfer extension to be reload into TSIZE just when a previous"] - pub const fn tser(&self) -> u16 { - let val = (self.0 >> 16usize) & 0xffff; - val as u16 + #[doc = "Power interface reset"] + pub fn set_pwrrst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize); } - #[doc = "Number of data transfer extension to be reload into TSIZE just when a previous"] - pub fn set_tser(&mut self, val: u16) { - self.0 = (self.0 & !(0xffff << 16usize)) | (((val as u32) & 0xffff) << 16usize); + #[doc = "DAC interface reset"] + pub const fn dacrst(&self) -> bool { + let val = (self.0 >> 29usize) & 0x01; + val != 0 } - } - impl Default for Cr2 { - fn default() -> Cr2 { - Cr2(0) + #[doc = "DAC interface reset"] + pub fn set_dacrst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 29usize)) | (((val as u32) & 0x01) << 29usize); } - } - #[doc = "Receiver CRC Register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Rxcrc(pub u32); - impl Rxcrc { - #[doc = "CRC register for receiver"] - pub const fn rxcrc(&self) -> u32 { - let val = (self.0 >> 0usize) & 0xffff_ffff; - val as u32 + #[doc = "I2C3 reset"] + pub const fn i2c3rst(&self) -> bool { + let val = (self.0 >> 30usize) & 0x01; + val != 0 } - #[doc = "CRC register for receiver"] - pub fn set_rxcrc(&mut self, val: u32) { - self.0 = - (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + #[doc = "I2C3 reset"] + pub fn set_i2c3rst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 30usize)) | (((val as u32) & 0x01) << 30usize); + } + #[doc = "Low power timer reset"] + pub const fn lptim1rst(&self) -> bool { + let val = (self.0 >> 31usize) & 0x01; + val != 0 + } + #[doc = "Low power timer reset"] + pub fn set_lptim1rst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize); } } - impl Default for Rxcrc { - fn default() -> Rxcrc { - Rxcrc(0) + impl Default for Apb1rstr { + fn default() -> Apb1rstr { + Apb1rstr(0) } } - #[doc = "Status Register"] + #[doc = "APB2 peripheral clock enable in sleep mode register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Sr(pub u32); - impl Sr { - #[doc = "Rx-Packet available"] - pub const fn rxp(&self) -> bool { + pub struct Apb2smenr(pub u32); + impl Apb2smenr { + #[doc = "System configuration controller clock enable during sleep mode bit"] + pub const fn syscfgsmen(&self) -> super::vals::Dbgsmen { let val = (self.0 >> 0usize) & 0x01; - val != 0 - } - #[doc = "Rx-Packet available"] - pub fn set_rxp(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); - } - #[doc = "Tx-Packet space available"] - pub const fn txp(&self) -> bool { - let val = (self.0 >> 1usize) & 0x01; - val != 0 + super::vals::Dbgsmen(val as u8) } - #[doc = "Tx-Packet space available"] - pub fn set_txp(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + #[doc = "System configuration controller clock enable during sleep mode bit"] + pub fn set_syscfgsmen(&mut self, val: super::vals::Dbgsmen) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "Duplex Packet"] - pub const fn dxp(&self) -> bool { + #[doc = "TIM21 timer clock enable during sleep mode bit"] + pub const fn tim21smen(&self) -> super::vals::Dbgsmen { let val = (self.0 >> 2usize) & 0x01; - val != 0 - } - #[doc = "Duplex Packet"] - pub fn set_dxp(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); - } - #[doc = "End Of Transfer"] - pub const fn eot(&self) -> bool { - let val = (self.0 >> 3usize) & 0x01; - val != 0 - } - #[doc = "End Of Transfer"] - pub fn set_eot(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); - } - #[doc = "Transmission Transfer Filled"] - pub const fn txtf(&self) -> bool { - let val = (self.0 >> 4usize) & 0x01; - val != 0 + super::vals::Dbgsmen(val as u8) } - #[doc = "Transmission Transfer Filled"] - pub fn set_txtf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); + #[doc = "TIM21 timer clock enable during sleep mode bit"] + pub fn set_tim21smen(&mut self, val: super::vals::Dbgsmen) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); } - #[doc = "Underrun at slave transmission mode"] - pub const fn udr(&self) -> bool { + #[doc = "TIM22 timer clock enable during sleep mode bit"] + pub const fn tim22smen(&self) -> super::vals::Dbgsmen { let val = (self.0 >> 5usize) & 0x01; - val != 0 - } - #[doc = "Underrun at slave transmission mode"] - pub fn set_udr(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); - } - #[doc = "Overrun"] - pub const fn ovr(&self) -> bool { - let val = (self.0 >> 6usize) & 0x01; - val != 0 - } - #[doc = "Overrun"] - pub fn set_ovr(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + super::vals::Dbgsmen(val as u8) } - #[doc = "CRC Error"] - pub const fn crce(&self) -> bool { - let val = (self.0 >> 7usize) & 0x01; - val != 0 + #[doc = "TIM22 timer clock enable during sleep mode bit"] + pub fn set_tim22smen(&mut self, val: super::vals::Dbgsmen) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "CRC Error"] - pub fn set_crce(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + #[doc = "ADC clock enable during sleep mode bit"] + pub const fn adcsmen(&self) -> super::vals::Dbgsmen { + let val = (self.0 >> 9usize) & 0x01; + super::vals::Dbgsmen(val as u8) } - #[doc = "TI frame format error"] - pub const fn tifre(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; - val != 0 + #[doc = "ADC clock enable during sleep mode bit"] + pub fn set_adcsmen(&mut self, val: super::vals::Dbgsmen) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); } - #[doc = "TI frame format error"] - pub fn set_tifre(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + #[doc = "SPI1 clock enable during sleep mode bit"] + pub const fn spi1smen(&self) -> super::vals::Dbgsmen { + let val = (self.0 >> 12usize) & 0x01; + super::vals::Dbgsmen(val as u8) } - #[doc = "Mode Fault"] - pub const fn modf(&self) -> bool { - let val = (self.0 >> 9usize) & 0x01; - val != 0 + #[doc = "SPI1 clock enable during sleep mode bit"] + pub fn set_spi1smen(&mut self, val: super::vals::Dbgsmen) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); } - #[doc = "Mode Fault"] - pub fn set_modf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + #[doc = "USART1 clock enable during sleep mode bit"] + pub const fn usart1smen(&self) -> super::vals::Dbgsmen { + let val = (self.0 >> 14usize) & 0x01; + super::vals::Dbgsmen(val as u8) } - #[doc = "Additional number of SPI data to be transacted was reload"] - pub const fn tserf(&self) -> bool { - let val = (self.0 >> 10usize) & 0x01; - val != 0 + #[doc = "USART1 clock enable during sleep mode bit"] + pub fn set_usart1smen(&mut self, val: super::vals::Dbgsmen) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); } - #[doc = "Additional number of SPI data to be transacted was reload"] - pub fn set_tserf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); + #[doc = "DBG clock enable during sleep mode bit"] + pub const fn dbgsmen(&self) -> super::vals::Dbgsmen { + let val = (self.0 >> 22usize) & 0x01; + super::vals::Dbgsmen(val as u8) } - #[doc = "SUSPend"] - pub const fn susp(&self) -> bool { - let val = (self.0 >> 11usize) & 0x01; - val != 0 + #[doc = "DBG clock enable during sleep mode bit"] + pub fn set_dbgsmen(&mut self, val: super::vals::Dbgsmen) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); } - #[doc = "SUSPend"] - pub fn set_susp(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); - } - #[doc = "TxFIFO transmission complete"] - pub const fn txc(&self) -> bool { - let val = (self.0 >> 12usize) & 0x01; - val != 0 - } - #[doc = "TxFIFO transmission complete"] - pub fn set_txc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); - } - #[doc = "RxFIFO Packing LeVeL"] - pub const fn rxplvl(&self) -> super::vals::Rxplvl { - let val = (self.0 >> 13usize) & 0x03; - super::vals::Rxplvl(val as u8) - } - #[doc = "RxFIFO Packing LeVeL"] - pub fn set_rxplvl(&mut self, val: super::vals::Rxplvl) { - self.0 = (self.0 & !(0x03 << 13usize)) | (((val.0 as u32) & 0x03) << 13usize); - } - #[doc = "RxFIFO Word Not Empty"] - pub const fn rxwne(&self) -> super::vals::Rxwne { - let val = (self.0 >> 15usize) & 0x01; - super::vals::Rxwne(val as u8) - } - #[doc = "RxFIFO Word Not Empty"] - pub fn set_rxwne(&mut self, val: super::vals::Rxwne) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); - } - #[doc = "Number of data frames remaining in current TSIZE session"] - pub const fn ctsize(&self) -> u16 { - let val = (self.0 >> 16usize) & 0xffff; - val as u16 - } - #[doc = "Number of data frames remaining in current TSIZE session"] - pub fn set_ctsize(&mut self, val: u16) { - self.0 = (self.0 & !(0xffff << 16usize)) | (((val as u32) & 0xffff) << 16usize); - } - } - impl Default for Sr { - fn default() -> Sr { - Sr(0) + } + impl Default for Apb2smenr { + fn default() -> Apb2smenr { + Apb2smenr(0) } } } @@ -5644,20571 +5429,21565 @@ pub mod spi_v3 { use crate::generic::*; #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Fthlv(pub u8); - impl Fthlv { - #[doc = "1 frame"] - pub const ONEFRAME: Self = Self(0); - #[doc = "2 frames"] - pub const TWOFRAMES: Self = Self(0x01); - #[doc = "3 frames"] - pub const THREEFRAMES: Self = Self(0x02); - #[doc = "4 frames"] - pub const FOURFRAMES: Self = Self(0x03); - #[doc = "5 frames"] - pub const FIVEFRAMES: Self = Self(0x04); - #[doc = "6 frames"] - pub const SIXFRAMES: Self = Self(0x05); - #[doc = "7 frames"] - pub const SEVENFRAMES: Self = Self(0x06); - #[doc = "8 frames"] - pub const EIGHTFRAMES: Self = Self(0x07); - #[doc = "9 frames"] - pub const NINEFRAMES: Self = Self(0x08); - #[doc = "10 frames"] - pub const TENFRAMES: Self = Self(0x09); - #[doc = "11 frames"] - pub const ELEVENFRAMES: Self = Self(0x0a); - #[doc = "12 frames"] - pub const TWELVEFRAMES: Self = Self(0x0b); - #[doc = "13 frames"] - pub const THIRTEENFRAMES: Self = Self(0x0c); - #[doc = "14 frames"] - pub const FOURTEENFRAMES: Self = Self(0x0d); - #[doc = "15 frames"] - pub const FIFTEENFRAMES: Self = Self(0x0e); - #[doc = "16 frames"] - pub const SIXTEENFRAMES: Self = Self(0x0f); + pub struct Rtcen(pub u8); + impl Rtcen { + #[doc = "RTC clock disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "RTC clock enabled"] + pub const ENABLED: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Rxplvl(pub u8); - impl Rxplvl { - #[doc = "Zero frames beyond packing ratio available"] - pub const ZEROFRAMES: Self = Self(0); - #[doc = "One frame beyond packing ratio available"] - pub const ONEFRAME: Self = Self(0x01); - #[doc = "Two frame beyond packing ratio available"] - pub const TWOFRAMES: Self = Self(0x02); - #[doc = "Three frame beyond packing ratio available"] - pub const THREEFRAMES: Self = Self(0x03); + pub struct Crypen(pub u8); + impl Crypen { + #[doc = "Clock disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "Clock enabled"] + pub const ENABLED: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Rxwne(pub u8); - impl Rxwne { - #[doc = "Less than 32-bit data frame received"] - pub const LESSTHAN32: Self = Self(0); - #[doc = "At least 32-bit data frame received"] - pub const ATLEAST32: Self = Self(0x01); + pub struct Stopwuck(pub u8); + impl Stopwuck { + #[doc = "Internal 64 KHz to 4 MHz (MSI) oscillator selected as wake-up from Stop clock"] + pub const MSI: Self = Self(0); + #[doc = "Internal 16 MHz (HSI) oscillator selected as wake-up from Stop clock (or HSI16/4 if HSI16DIVEN=1)"] + pub const HSI16: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lsbfrst(pub u8); - impl Lsbfrst { - #[doc = "Data is transmitted/received with the MSB first"] - pub const MSBFIRST: Self = Self(0); - #[doc = "Data is transmitted/received with the LSB first"] - pub const LSBFIRST: Self = Self(0x01); + pub struct Lsedrv(pub u8); + impl Lsedrv { + #[doc = "Lowest drive"] + pub const LOW: Self = Self(0); + #[doc = "Medium low drive"] + pub const MEDIUMLOW: Self = Self(0x01); + #[doc = "Medium high drive"] + pub const MEDIUMHIGH: Self = Self(0x02); + #[doc = "Highest drive"] + pub const HIGH: Self = Self(0x03); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Datlen(pub u8); - impl Datlen { - #[doc = "16 bit data length"] - pub const BITS16: Self = Self(0); - #[doc = "24 bit data length"] - pub const BITS24: Self = Self(0x01); - #[doc = "32 bit data length"] - pub const BITS32: Self = Self(0x02); + pub struct Lpwrrstfr(pub u8); + impl Lpwrrstfr { + #[doc = "No reset has occured"] + pub const NORESET: Self = Self(0); + #[doc = "A reset has occured"] + pub const RESET: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Tcrcini(pub u8); - impl Tcrcini { - #[doc = "All zeros TX CRC initialization pattern"] - pub const ALLZEROS: Self = Self(0); - #[doc = "All ones TX CRC initialization pattern"] - pub const ALLONES: Self = Self(0x01); + pub struct Pllmul(pub u8); + impl Pllmul { + #[doc = "PLL clock entry x 3"] + pub const MUL3: Self = Self(0); + #[doc = "PLL clock entry x 4"] + pub const MUL4: Self = Self(0x01); + #[doc = "PLL clock entry x 6"] + pub const MUL6: Self = Self(0x02); + #[doc = "PLL clock entry x 8"] + pub const MUL8: Self = Self(0x03); + #[doc = "PLL clock entry x 12"] + pub const MUL12: Self = Self(0x04); + #[doc = "PLL clock entry x 16"] + pub const MUL16: Self = Self(0x05); + #[doc = "PLL clock entry x 24"] + pub const MUL24: Self = Self(0x06); + #[doc = "PLL clock entry x 32"] + pub const MUL32: Self = Self(0x07); + #[doc = "PLL clock entry x 48"] + pub const MUL48: Self = Self(0x08); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Cpha(pub u8); - impl Cpha { - #[doc = "The first clock transition is the first data capture edge"] - pub const FIRSTEDGE: Self = Self(0); - #[doc = "The second clock transition is the first data capture edge"] - pub const SECONDEDGE: Self = Self(0x01); + pub struct Hsirdyie(pub u8); + impl Hsirdyie { + #[doc = "Ready interrupt disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "Ready interrupt enabled"] + pub const ENABLED: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Datfmt(pub u8); - impl Datfmt { - #[doc = "The data inside RXDR and TXDR are right aligned"] - pub const RIGHTALIGNED: Self = Self(0); - #[doc = "The data inside RXDR and TXDR are left aligned"] - pub const LEFTALIGNED: Self = Self(0x01); + pub struct Lptimen(pub u8); + impl Lptimen { + #[doc = "Clock disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "Clock enabled"] + pub const ENABLED: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Hddir(pub u8); - impl Hddir { - #[doc = "Receiver in half duplex mode"] - pub const RECEIVER: Self = Self(0); - #[doc = "Transmitter in half duplex mode"] - pub const TRANSMITTER: Self = Self(0x01); + pub struct Hpre(pub u8); + impl Hpre { + #[doc = "system clock not divided"] + pub const DIV1: Self = Self(0); + #[doc = "system clock divided by 2"] + pub const DIV2: Self = Self(0x08); + #[doc = "system clock divided by 4"] + pub const DIV4: Self = Self(0x09); + #[doc = "system clock divided by 8"] + pub const DIV8: Self = Self(0x0a); + #[doc = "system clock divided by 16"] + pub const DIV16: Self = Self(0x0b); + #[doc = "system clock divided by 64"] + pub const DIV64: Self = Self(0x0c); + #[doc = "system clock divided by 128"] + pub const DIV128: Self = Self(0x0d); + #[doc = "system clock divided by 256"] + pub const DIV256: Self = Self(0x0e); + #[doc = "system clock divided by 512"] + pub const DIV512: Self = Self(0x0f); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Rcrcini(pub u8); - impl Rcrcini { - #[doc = "All zeros RX CRC initialization pattern"] - pub const ALLZEROS: Self = Self(0); - #[doc = "All ones RX CRC initialization pattern"] - pub const ALLONES: Self = Self(0x01); + pub struct Csshsecw(pub u8); + impl Csshsecw { + #[doc = "Clear interrupt flag"] + pub const CLEAR: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Udrdet(pub u8); - impl Udrdet { - #[doc = "Underrun is detected at begin of data frame"] - pub const STARTOFFRAME: Self = Self(0); - #[doc = "Underrun is detected at end of last data frame"] - pub const ENDOFFRAME: Self = Self(0x01); - #[doc = "Underrun is detected at begin of active SS signal"] - pub const STARTOFSLAVESELECT: Self = Self(0x02); + pub struct Cryprstw(pub u8); + impl Cryprstw { + #[doc = "Reset the module"] + pub const RESET: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Master(pub u8); - impl Master { - #[doc = "Slave configuration"] - pub const SLAVE: Self = Self(0); - #[doc = "Master configuration"] - pub const MASTER: Self = Self(0x01); + pub struct Sws(pub u8); + impl Sws { + #[doc = "MSI oscillator used as system clock"] + pub const MSI: Self = Self(0); + #[doc = "HSI oscillator used as system clock"] + pub const HSI16: Self = Self(0x01); + #[doc = "HSE oscillator used as system clock"] + pub const HSE: Self = Self(0x02); + #[doc = "PLL used as system clock"] + pub const PLL: Self = Self(0x03); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Udrcfg(pub u8); - impl Udrcfg { - #[doc = "Slave sends a constant underrun pattern"] - pub const CONSTANT: Self = Self(0); - #[doc = "Slave repeats last received data frame from master"] - pub const REPEATRECEIVED: Self = Self(0x01); - #[doc = "Slave repeats last transmitted data frame"] - pub const REPEATTRANSMITTED: Self = Self(0x02); + pub struct Lsebyp(pub u8); + impl Lsebyp { + #[doc = "LSE oscillator not bypassed"] + pub const NOTBYPASSED: Self = Self(0); + #[doc = "LSE oscillator bypassed"] + pub const BYPASSED: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Sp(pub u8); - impl Sp { - #[doc = "Motorola SPI protocol"] - pub const MOTOROLA: Self = Self(0); - #[doc = "TI SPI protocol"] - pub const TI: Self = Self(0x01); + pub struct Sramsmen(pub u8); + impl Sramsmen { + #[doc = "NVM interface clock disabled in Sleep mode"] + pub const DISABLED: Self = Self(0); + #[doc = "NVM interface clock enabled in Sleep mode"] + pub const ENABLED: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Comm(pub u8); - impl Comm { - #[doc = "Full duplex"] - pub const FULLDUPLEX: Self = Self(0); - #[doc = "Simplex transmitter only"] - pub const TRANSMITTER: Self = Self(0x01); - #[doc = "Simplex receiver only"] - pub const RECEIVER: Self = Self(0x02); - #[doc = "Half duplex"] - pub const HALFDUPLEX: Self = Self(0x03); + pub struct Hsi16rdyfr(pub u8); + impl Hsi16rdyfr { + #[doc = "HSI 16 MHz oscillator not ready"] + pub const NOTREADY: Self = Self(0); + #[doc = "HSI 16 MHz oscillator ready"] + pub const READY: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ssiop(pub u8); - impl Ssiop { - #[doc = "Low level is active for SS signal"] - pub const ACTIVELOW: Self = Self(0); - #[doc = "High level is active for SS signal"] - pub const ACTIVEHIGH: Self = Self(0x01); + pub struct Hsebyp(pub u8); + impl Hsebyp { + #[doc = "HSE oscillator not bypassed"] + pub const NOTBYPASSED: Self = Self(0); + #[doc = "HSE oscillator bypassed"] + pub const BYPASSED: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Cpol(pub u8); - impl Cpol { - #[doc = "CK to 0 when idle"] - pub const IDLELOW: Self = Self(0); - #[doc = "CK to 1 when idle"] - pub const IDLEHIGH: Self = Self(0x01); + pub struct Crypsmen(pub u8); + impl Crypsmen { + #[doc = "Crypto clock disabled in Sleep mode"] + pub const DISABLED: Self = Self(0); + #[doc = "Crypto clock enabled in Sleep mode"] + pub const ENABLED: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Afcntr(pub u8); - impl Afcntr { - #[doc = "Peripheral takes no control of GPIOs while disabled"] - pub const NOTCONTROLLED: Self = Self(0); - #[doc = "Peripheral controls GPIOs while disabled"] - pub const CONTROLLED: Self = Self(0x01); + pub struct Pllrdyr(pub u8); + impl Pllrdyr { + #[doc = "PLL unlocked"] + pub const UNLOCKED: Self = Self(0); + #[doc = "PLL locked"] + pub const LOCKED: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Crc(pub u8); - impl Crc { - #[doc = "Full size (33/17 bit) CRC polynomial is not used"] + pub struct Pllon(pub u8); + impl Pllon { + #[doc = "Clock disabled"] pub const DISABLED: Self = Self(0); - #[doc = "Full size (33/17 bit) CRC polynomial is used"] + #[doc = "Clock enabled"] pub const ENABLED: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Mbr(pub u8); - impl Mbr { - #[doc = "f_spi_ker_ck / 2"] - pub const DIV2: Self = Self(0); - #[doc = "f_spi_ker_ck / 4"] - pub const DIV4: Self = Self(0x01); - #[doc = "f_spi_ker_ck / 8"] - pub const DIV8: Self = Self(0x02); - #[doc = "f_spi_ker_ck / 16"] - pub const DIV16: Self = Self(0x03); - #[doc = "f_spi_ker_ck / 32"] - pub const DIV32: Self = Self(0x04); - #[doc = "f_spi_ker_ck / 64"] - pub const DIV64: Self = Self(0x05); - #[doc = "f_spi_ker_ck / 128"] - pub const DIV128: Self = Self(0x06); - #[doc = "f_spi_ker_ck / 256"] - pub const DIV256: Self = Self(0x07); + pub struct Csshsef(pub u8); + impl Csshsef { + #[doc = "No clock security interrupt caused by HSE clock failure"] + pub const NOCLOCK: Self = Self(0); + #[doc = "Clock security interrupt caused by HSE clock failure"] + pub const CLOCK: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ssom(pub u8); - impl Ssom { - #[doc = "SS is asserted until data transfer complete"] - pub const ASSERTED: Self = Self(0); - #[doc = "Data frames interleaved with SS not asserted during MIDI"] - pub const NOTASSERTED: Self = Self(0x01); + pub struct Lptimrstw(pub u8); + impl Lptimrstw { + #[doc = "Reset the module"] + pub const RESET: Self = Self(0x01); } - } -} -pub mod dma_v1 { - use crate::generic::*; - #[doc = "DMA controller"] - #[derive(Copy, Clone)] - pub struct Dma(pub *mut u8); - unsafe impl Send for Dma {} - unsafe impl Sync for Dma {} - impl Dma { - #[doc = "DMA interrupt status register (DMA_ISR)"] - pub fn isr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(0usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Msirange(pub u8); + impl Msirange { + #[doc = "range 0 around 65.536 kHz"] + pub const RANGE0: Self = Self(0); + #[doc = "range 1 around 131.072 kHz"] + pub const RANGE1: Self = Self(0x01); + #[doc = "range 2 around 262.144 kHz"] + pub const RANGE2: Self = Self(0x02); + #[doc = "range 3 around 524.288 kHz"] + pub const RANGE3: Self = Self(0x03); + #[doc = "range 4 around 1.048 MHz"] + pub const RANGE4: Self = Self(0x04); + #[doc = "range 5 around 2.097 MHz (reset value)"] + pub const RANGE5: Self = Self(0x05); + #[doc = "range 6 around 4.194 MHz"] + pub const RANGE6: Self = Self(0x06); + #[doc = "not allowed"] + pub const RANGE7: Self = Self(0x07); } - #[doc = "DMA interrupt flag clear register (DMA_IFCR)"] - pub fn ifcr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(4usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Plldiv(pub u8); + impl Plldiv { + #[doc = "PLLVCO / 2"] + pub const DIV2: Self = Self(0x01); + #[doc = "PLLVCO / 3"] + pub const DIV3: Self = Self(0x02); + #[doc = "PLLVCO / 4"] + pub const DIV4: Self = Self(0x03); } - #[doc = "Channel cluster: CCR?, CNDTR?, CPAR?, and CMAR? registers"] - pub fn ch(self, n: usize) -> Ch { - assert!(n < 7usize); - unsafe { Ch(self.0.add(8usize + n * 20usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Rtcsel(pub u8); + impl Rtcsel { + #[doc = "No clock"] + pub const NOCLOCK: Self = Self(0); + #[doc = "LSE oscillator clock used as RTC clock"] + pub const LSE: Self = Self(0x01); + #[doc = "LSI oscillator clock used as RTC clock"] + pub const LSI: Self = Self(0x02); + #[doc = "HSE oscillator clock divided by a programmable prescaler (selection through the RTCPRE[1:0] +bits in the RCC clock control register (RCC_CR)) used as the RTC clock"] + pub const HSE: Self = Self(0x03); } - } - #[doc = "Channel cluster: CCR?, CNDTR?, CPAR?, and CMAR? registers"] - #[derive(Copy, Clone)] - pub struct Ch(pub *mut u8); - unsafe impl Send for Ch {} - unsafe impl Sync for Ch {} - impl Ch { - #[doc = "DMA channel configuration register (DMA_CCR)"] - pub fn cr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(0usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Dbgrstw(pub u8); + impl Dbgrstw { + #[doc = "Reset the module"] + pub const RESET: Self = Self(0x01); } - #[doc = "DMA channel 1 number of data register"] - pub fn ndtr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(4usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Hserdyr(pub u8); + impl Hserdyr { + #[doc = "Oscillator is not stable"] + pub const NOTREADY: Self = Self(0); + #[doc = "Oscillator is stable"] + pub const READY: Self = Self(0x01); } - #[doc = "DMA channel 1 peripheral address register"] - pub fn par(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(8usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Csslseon(pub u8); + impl Csslseon { + #[doc = "Oscillator OFF"] + pub const OFF: Self = Self(0); + #[doc = "Oscillator ON"] + pub const ON: Self = Self(0x01); } - #[doc = "DMA channel 1 memory address register"] - pub fn mar(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(12usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Iophen(pub u8); + impl Iophen { + #[doc = "Port clock disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "Port clock enabled"] + pub const ENABLED: Self = Self(0x01); } - } - pub mod regs { - use crate::generic::*; - #[doc = "DMA channel configuration register (DMA_CCR)"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr(pub u32); - impl Cr { - #[doc = "Channel enable"] - pub const fn en(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; - val != 0 - } - #[doc = "Channel enable"] - pub fn set_en(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); - } - #[doc = "Transfer complete interrupt enable"] - pub const fn tcie(&self) -> bool { - let val = (self.0 >> 1usize) & 0x01; - val != 0 - } - #[doc = "Transfer complete interrupt enable"] - pub fn set_tcie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); - } - #[doc = "Half Transfer interrupt enable"] - pub const fn htie(&self) -> bool { - let val = (self.0 >> 2usize) & 0x01; - val != 0 - } - #[doc = "Half Transfer interrupt enable"] - pub fn set_htie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); - } - #[doc = "Transfer error interrupt enable"] - pub const fn teie(&self) -> bool { - let val = (self.0 >> 3usize) & 0x01; - val != 0 - } - #[doc = "Transfer error interrupt enable"] - pub fn set_teie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); - } - #[doc = "Data transfer direction"] - pub const fn dir(&self) -> super::vals::Dir { - let val = (self.0 >> 4usize) & 0x01; - super::vals::Dir(val as u8) - } - #[doc = "Data transfer direction"] - pub fn set_dir(&mut self, val: super::vals::Dir) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); - } - #[doc = "Circular mode"] - pub const fn circ(&self) -> super::vals::Circ { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Circ(val as u8) - } - #[doc = "Circular mode"] - pub fn set_circ(&mut self, val: super::vals::Circ) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); - } - #[doc = "Peripheral increment mode"] - pub const fn pinc(&self) -> super::vals::Inc { - let val = (self.0 >> 6usize) & 0x01; - super::vals::Inc(val as u8) - } - #[doc = "Peripheral increment mode"] - pub fn set_pinc(&mut self, val: super::vals::Inc) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); - } - #[doc = "Memory increment mode"] - pub const fn minc(&self) -> super::vals::Inc { - let val = (self.0 >> 7usize) & 0x01; - super::vals::Inc(val as u8) - } - #[doc = "Memory increment mode"] - pub fn set_minc(&mut self, val: super::vals::Inc) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); - } - #[doc = "Peripheral size"] - pub const fn psize(&self) -> super::vals::Size { - let val = (self.0 >> 8usize) & 0x03; - super::vals::Size(val as u8) - } - #[doc = "Peripheral size"] - pub fn set_psize(&mut self, val: super::vals::Size) { - self.0 = (self.0 & !(0x03 << 8usize)) | (((val.0 as u32) & 0x03) << 8usize); - } - #[doc = "Memory size"] - pub const fn msize(&self) -> super::vals::Size { - let val = (self.0 >> 10usize) & 0x03; - super::vals::Size(val as u8) - } - #[doc = "Memory size"] - pub fn set_msize(&mut self, val: super::vals::Size) { - self.0 = (self.0 & !(0x03 << 10usize)) | (((val.0 as u32) & 0x03) << 10usize); - } - #[doc = "Channel Priority level"] - pub const fn pl(&self) -> super::vals::Pl { - let val = (self.0 >> 12usize) & 0x03; - super::vals::Pl(val as u8) - } - #[doc = "Channel Priority level"] - pub fn set_pl(&mut self, val: super::vals::Pl) { - self.0 = (self.0 & !(0x03 << 12usize)) | (((val.0 as u32) & 0x03) << 12usize); - } - #[doc = "Memory to memory mode"] - pub const fn mem2mem(&self) -> super::vals::Memmem { - let val = (self.0 >> 14usize) & 0x01; - super::vals::Memmem(val as u8) - } - #[doc = "Memory to memory mode"] - pub fn set_mem2mem(&mut self, val: super::vals::Memmem) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); - } - } - impl Default for Cr { - fn default() -> Cr { - Cr(0) - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Sw(pub u8); + impl Sw { + #[doc = "MSI oscillator used as system clock"] + pub const MSI: Self = Self(0); + #[doc = "HSI oscillator used as system clock"] + pub const HSI16: Self = Self(0x01); + #[doc = "HSE oscillator used as system clock"] + pub const HSE: Self = Self(0x02); + #[doc = "PLL used as system clock"] + pub const PLL: Self = Self(0x03); } - #[doc = "DMA interrupt flag clear register (DMA_IFCR)"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ifcr(pub u32); - impl Ifcr { - #[doc = "Channel 1 Global interrupt clear"] - pub fn cgif(&self, n: usize) -> bool { - assert!(n < 7usize); - let offs = 0usize + n * 4usize; - let val = (self.0 >> offs) & 0x01; - val != 0 - } - #[doc = "Channel 1 Global interrupt clear"] - pub fn set_cgif(&mut self, n: usize, val: bool) { - assert!(n < 7usize); - let offs = 0usize + n * 4usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); - } - #[doc = "Channel 1 Transfer Complete clear"] - pub fn ctcif(&self, n: usize) -> bool { - assert!(n < 7usize); - let offs = 1usize + n * 4usize; - let val = (self.0 >> offs) & 0x01; - val != 0 - } - #[doc = "Channel 1 Transfer Complete clear"] - pub fn set_ctcif(&mut self, n: usize, val: bool) { - assert!(n < 7usize); - let offs = 1usize + n * 4usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); - } - #[doc = "Channel 1 Half Transfer clear"] - pub fn chtif(&self, n: usize) -> bool { - assert!(n < 7usize); - let offs = 2usize + n * 4usize; - let val = (self.0 >> offs) & 0x01; - val != 0 - } - #[doc = "Channel 1 Half Transfer clear"] - pub fn set_chtif(&mut self, n: usize, val: bool) { - assert!(n < 7usize); - let offs = 2usize + n * 4usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); - } - #[doc = "Channel 1 Transfer Error clear"] - pub fn cteif(&self, n: usize) -> bool { - assert!(n < 7usize); - let offs = 3usize + n * 4usize; - let val = (self.0 >> offs) & 0x01; - val != 0 - } - #[doc = "Channel 1 Transfer Error clear"] - pub fn set_cteif(&mut self, n: usize, val: bool) { - assert!(n < 7usize); - let offs = 3usize + n * 4usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); - } - } - impl Default for Ifcr { - fn default() -> Ifcr { - Ifcr(0) - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Iophrst(pub u8); + impl Iophrst { + #[doc = "Reset I/O port"] + pub const RESET: Self = Self(0x01); } - #[doc = "DMA interrupt status register (DMA_ISR)"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Isr(pub u32); - impl Isr { - #[doc = "Channel 1 Global interrupt flag"] - pub fn gif(&self, n: usize) -> bool { - assert!(n < 7usize); - let offs = 0usize + n * 4usize; - let val = (self.0 >> offs) & 0x01; - val != 0 - } - #[doc = "Channel 1 Global interrupt flag"] - pub fn set_gif(&mut self, n: usize, val: bool) { - assert!(n < 7usize); - let offs = 0usize + n * 4usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); - } - #[doc = "Channel 1 Transfer Complete flag"] - pub fn tcif(&self, n: usize) -> bool { - assert!(n < 7usize); - let offs = 1usize + n * 4usize; - let val = (self.0 >> offs) & 0x01; - val != 0 - } - #[doc = "Channel 1 Transfer Complete flag"] - pub fn set_tcif(&mut self, n: usize, val: bool) { - assert!(n < 7usize); - let offs = 1usize + n * 4usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); - } - #[doc = "Channel 1 Half Transfer Complete flag"] - pub fn htif(&self, n: usize) -> bool { - assert!(n < 7usize); - let offs = 2usize + n * 4usize; - let val = (self.0 >> offs) & 0x01; - val != 0 - } - #[doc = "Channel 1 Half Transfer Complete flag"] - pub fn set_htif(&mut self, n: usize, val: bool) { - assert!(n < 7usize); - let offs = 2usize + n * 4usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); - } - #[doc = "Channel 1 Transfer Error flag"] - pub fn teif(&self, n: usize) -> bool { - assert!(n < 7usize); - let offs = 3usize + n * 4usize; - let val = (self.0 >> offs) & 0x01; - val != 0 - } - #[doc = "Channel 1 Transfer Error flag"] - pub fn set_teif(&mut self, n: usize, val: bool) { - assert!(n < 7usize); - let offs = 3usize + n * 4usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Icsel(pub u8); + impl Icsel { + #[doc = "APB clock selected as peripheral clock"] + pub const APB: Self = Self(0); + #[doc = "System clock selected as peripheral clock"] + pub const SYSTEM: Self = Self(0x01); + #[doc = "HSI16 clock selected as peripheral clock"] + pub const HSI16: Self = Self(0x02); } - impl Default for Isr { - fn default() -> Isr { - Isr(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Rtcrstw(pub u8); + impl Rtcrstw { + #[doc = "Resets the RTC peripheral"] + pub const RESET: Self = Self(0x01); } - #[doc = "DMA channel 1 number of data register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ndtr(pub u32); - impl Ndtr { - #[doc = "Number of data to transfer"] - pub const fn ndt(&self) -> u16 { - let val = (self.0 >> 0usize) & 0xffff; - val as u16 - } - #[doc = "Number of data to transfer"] - pub fn set_ndt(&mut self, val: u16) { - self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Mcopre(pub u8); + impl Mcopre { + #[doc = "No division"] + pub const DIV1: Self = Self(0); + #[doc = "Division by 2"] + pub const DIV2: Self = Self(0x01); + #[doc = "Division by 4"] + pub const DIV4: Self = Self(0x02); + #[doc = "Division by 8"] + pub const DIV8: Self = Self(0x03); + #[doc = "Division by 16"] + pub const DIV16: Self = Self(0x04); } - impl Default for Ndtr { - fn default() -> Ndtr { - Ndtr(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Dbgen(pub u8); + impl Dbgen { + #[doc = "Clock disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "Clock enabled"] + pub const ENABLED: Self = Self(0x01); } - } - pub mod vals { - use crate::generic::*; #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Size(pub u8); - impl Size { - #[doc = "8-bit size"] - pub const BITS8: Self = Self(0); - #[doc = "16-bit size"] - pub const BITS16: Self = Self(0x01); - #[doc = "32-bit size"] - pub const BITS32: Self = Self(0x02); + pub struct Hsidiven(pub u8); + impl Hsidiven { + #[doc = "no 16 MHz HSI division requested"] + pub const NOTDIVIDED: Self = Self(0); + #[doc = "16 MHz HSI division by 4 requested"] + pub const DIV4: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Circ(pub u8); - impl Circ { - #[doc = "Circular buffer disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "Circular buffer enabled"] - pub const ENABLED: Self = Self(0x01); + pub struct Csslsed(pub u8); + impl Csslsed { + #[doc = "No failure detected on LSE (32 kHz oscillator)"] + pub const NOFAILURE: Self = Self(0); + #[doc = "Failure detected on LSE (32 kHz oscillator)"] + pub const FAILURE: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Inc(pub u8); - impl Inc { - #[doc = "Increment mode disabled"] + pub struct Hsiouten(pub u8); + impl Hsiouten { + #[doc = "HSI output clock disabled"] pub const DISABLED: Self = Self(0); - #[doc = "Increment mode enabled"] + #[doc = "HSI output clock enabled"] pub const ENABLED: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Memmem(pub u8); - impl Memmem { - #[doc = "Memory to memory mode disabled"] + pub struct Rmvfw(pub u8); + impl Rmvfw { + #[doc = "Clears the reset flag"] + pub const CLEAR: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Crcsmen(pub u8); + impl Crcsmen { + #[doc = "Test integration module clock disabled in Sleep mode"] pub const DISABLED: Self = Self(0); - #[doc = "Memory to memory mode enabled"] + #[doc = "Test integration module clock enabled in Sleep mode (if enabled by CRCEN)"] pub const ENABLED: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Pl(pub u8); - impl Pl { - #[doc = "Low priority"] - pub const LOW: Self = Self(0); - #[doc = "Medium priority"] - pub const MEDIUM: Self = Self(0x01); - #[doc = "High priority"] - pub const HIGH: Self = Self(0x02); - #[doc = "Very high priority"] - pub const VERYHIGH: Self = Self(0x03); + pub struct Csslsef(pub u8); + impl Csslsef { + #[doc = "No failure detected on LSE clock failure"] + pub const NOFAILURE: Self = Self(0); + #[doc = "Failure detected on LSE clock failure"] + pub const FAILURE: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Dir(pub u8); - impl Dir { - #[doc = "Read from peripheral"] - pub const FROMPERIPHERAL: Self = Self(0); - #[doc = "Read from memory"] - pub const FROMMEMORY: Self = Self(0x01); - } - } -} -pub mod dma_v2 { - use crate::generic::*; - #[doc = "DMA controller"] - #[derive(Copy, Clone)] - pub struct Dma(pub *mut u8); - unsafe impl Send for Dma {} - unsafe impl Sync for Dma {} - impl Dma { - #[doc = "low interrupt status register"] - pub fn isr(self, n: usize) -> Reg { - assert!(n < 2usize); - unsafe { Reg::from_ptr(self.0.add(0usize + n * 4usize)) } - } - #[doc = "low interrupt flag clear register"] - pub fn ifcr(self, n: usize) -> Reg { - assert!(n < 2usize); - unsafe { Reg::from_ptr(self.0.add(8usize + n * 4usize)) } - } - #[doc = "Stream cluster: S?CR, S?NDTR, S?M0AR, S?M1AR and S?FCR registers"] - pub fn st(self, n: usize) -> St { - assert!(n < 8usize); - unsafe { St(self.0.add(16usize + n * 24usize)) } - } - } - #[doc = "Stream cluster: S?CR, S?NDTR, S?M0AR, S?M1AR and S?FCR registers"] - #[derive(Copy, Clone)] - pub struct St(pub *mut u8); - unsafe impl Send for St {} - unsafe impl Sync for St {} - impl St { - #[doc = "stream x configuration register"] - pub fn cr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(0usize)) } - } - #[doc = "stream x number of data register"] - pub fn ndtr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(4usize)) } - } - #[doc = "stream x peripheral address register"] - pub fn par(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(8usize)) } - } - #[doc = "stream x memory 0 address register"] - pub fn m0ar(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(12usize)) } - } - #[doc = "stream x memory 1 address register"] - pub fn m1ar(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(16usize)) } - } - #[doc = "stream x FIFO control register"] - pub fn fcr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(20usize)) } + pub struct Pllsrc(pub u8); + impl Pllsrc { + #[doc = "HSI selected as PLL input clock"] + pub const HSI16: Self = Self(0); + #[doc = "HSE selected as PLL input clock"] + pub const HSE: Self = Self(0x01); } - } - pub mod vals { - use crate::generic::*; #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Pfctrl(pub u8); - impl Pfctrl { - #[doc = "The DMA is the flow controller"] - pub const DMA: Self = Self(0); - #[doc = "The peripheral is the flow controller"] - pub const PERIPHERAL: Self = Self(0x01); + pub struct Dmasmen(pub u8); + impl Dmasmen { + #[doc = "DMA clock disabled in Sleep mode"] + pub const DISABLED: Self = Self(0); + #[doc = "DMA clock enabled in Sleep mode"] + pub const ENABLED: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ct(pub u8); - impl Ct { - #[doc = "The current target memory is Memory 0"] - pub const MEMORY0: Self = Self(0); - #[doc = "The current target memory is Memory 1"] - pub const MEMORY1: Self = Self(0x01); + pub struct Hsidivfr(pub u8); + impl Hsidivfr { + #[doc = "16 MHz HSI clock not divided"] + pub const NOTDIVIDED: Self = Self(0); + #[doc = "16 MHz HSI clock divided by 4"] + pub const DIV4: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Fs(pub u8); - impl Fs { - #[doc = "0 < fifo_level < 1/4"] - pub const QUARTER1: Self = Self(0); - #[doc = "1/4 <= fifo_level < 1/2"] - pub const QUARTER2: Self = Self(0x01); - #[doc = "1/2 <= fifo_level < 3/4"] - pub const QUARTER3: Self = Self(0x02); - #[doc = "3/4 <= fifo_level < full"] - pub const QUARTER4: Self = Self(0x03); - #[doc = "FIFO is empty"] - pub const EMPTY: Self = Self(0x04); - #[doc = "FIFO is full"] - pub const FULL: Self = Self(0x05); + pub struct Lpuartsel(pub u8); + impl Lpuartsel { + #[doc = "APB clock selected as peripheral clock"] + pub const APB: Self = Self(0); + #[doc = "System clock selected as peripheral clock"] + pub const SYSTEM: Self = Self(0x01); + #[doc = "HSI16 clock selected as peripheral clock"] + pub const HSI16: Self = Self(0x02); + #[doc = "LSE clock selected as peripheral clock"] + pub const LSE: Self = Self(0x03); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Dbm(pub u8); - impl Dbm { - #[doc = "No buffer switching at the end of transfer"] + pub struct Iophsmen(pub u8); + impl Iophsmen { + #[doc = "Port x clock is disabled in Sleep mode"] pub const DISABLED: Self = Self(0); - #[doc = "Memory target switched at the end of the DMA transfer"] + #[doc = "Port x clock is enabled in Sleep mode (if enabled by IOPHEN)"] pub const ENABLED: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Pincos(pub u8); - impl Pincos { - #[doc = "The offset size for the peripheral address calculation is linked to the PSIZE"] - pub const PSIZE: Self = Self(0); - #[doc = "The offset size for the peripheral address calculation is fixed to 4 (32-bit alignment)"] - pub const FIXED4: Self = Self(0x01); + pub struct Hsi48rdyfr(pub u8); + impl Hsi48rdyfr { + #[doc = "No clock ready interrupt"] + pub const NOTINTERRUPTED: Self = Self(0); + #[doc = "Clock ready interrupt"] + pub const INTERRUPTED: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Dmdis(pub u8); - impl Dmdis { - #[doc = "Direct mode is enabled"] - pub const ENABLED: Self = Self(0); - #[doc = "Direct mode is disabled"] - pub const DISABLED: Self = Self(0x01); + pub struct Ppre(pub u8); + impl Ppre { + #[doc = "HCLK not divided"] + pub const DIV1: Self = Self(0); + #[doc = "HCLK divided by 2"] + pub const DIV2: Self = Self(0x04); + #[doc = "HCLK divided by 4"] + pub const DIV4: Self = Self(0x05); + #[doc = "HCLK divided by 8"] + pub const DIV8: Self = Self(0x06); + #[doc = "HCLK divided by 16"] + pub const DIV16: Self = Self(0x07); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Burst(pub u8); - impl Burst { - #[doc = "Single transfer"] - pub const SINGLE: Self = Self(0); - #[doc = "Incremental burst of 4 beats"] - pub const INCR4: Self = Self(0x01); - #[doc = "Incremental burst of 8 beats"] - pub const INCR8: Self = Self(0x02); - #[doc = "Incremental burst of 16 beats"] - pub const INCR16: Self = Self(0x03); + pub struct Lptimsel(pub u8); + impl Lptimsel { + #[doc = "APB clock selected as Timer clock"] + pub const APB: Self = Self(0); + #[doc = "LSI clock selected as Timer clock"] + pub const LSI: Self = Self(0x01); + #[doc = "HSI16 clock selected as Timer clock"] + pub const HSI16: Self = Self(0x02); + #[doc = "LSE clock selected as Timer clock"] + pub const LSE: Self = Self(0x03); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Dir(pub u8); - impl Dir { - #[doc = "Peripheral-to-memory"] - pub const PERIPHERALTOMEMORY: Self = Self(0); - #[doc = "Memory-to-peripheral"] - pub const MEMORYTOPERIPHERAL: Self = Self(0x01); - #[doc = "Memory-to-memory"] - pub const MEMORYTOMEMORY: Self = Self(0x02); + pub struct Rtcpre(pub u8); + impl Rtcpre { + #[doc = "HSE divided by 2"] + pub const DIV2: Self = Self(0); + #[doc = "HSE divided by 4"] + pub const DIV4: Self = Self(0x01); + #[doc = "HSE divided by 8"] + pub const DIV8: Self = Self(0x02); + #[doc = "HSE divided by 16"] + pub const DIV16: Self = Self(0x03); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Pl(pub u8); - impl Pl { - #[doc = "Low"] - pub const LOW: Self = Self(0); - #[doc = "Medium"] - pub const MEDIUM: Self = Self(0x01); - #[doc = "High"] - pub const HIGH: Self = Self(0x02); - #[doc = "Very high"] - pub const VERYHIGH: Self = Self(0x03); + pub struct Csslse(pub u8); + impl Csslse { + #[doc = "LSE CSS interrupt disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "LSE CSS interrupt enabled"] + pub const ENABLED: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Circ(pub u8); - impl Circ { - #[doc = "Circular mode disabled"] + pub struct Lptimsmen(pub u8); + impl Lptimsmen { + #[doc = "Clock disabled"] pub const DISABLED: Self = Self(0); - #[doc = "Circular mode enabled"] + #[doc = "Clock enabled"] pub const ENABLED: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Inc(pub u8); - impl Inc { - #[doc = "Address pointer is fixed"] - pub const FIXED: Self = Self(0); - #[doc = "Address pointer is incremented after each data transfer"] - pub const INCREMENTED: Self = Self(0x01); + pub struct Mifsmen(pub u8); + impl Mifsmen { + #[doc = "NVM interface clock disabled in Sleep mode"] + pub const DISABLED: Self = Self(0); + #[doc = "NVM interface clock enabled in Sleep mode"] + pub const ENABLED: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Fth(pub u8); - impl Fth { - #[doc = "1/4 full FIFO"] - pub const QUARTER: Self = Self(0); - #[doc = "1/2 full FIFO"] - pub const HALF: Self = Self(0x01); - #[doc = "3/4 full FIFO"] - pub const THREEQUARTERS: Self = Self(0x02); - #[doc = "Full FIFO"] - pub const FULL: Self = Self(0x03); + pub struct Dbgsmen(pub u8); + impl Dbgsmen { + #[doc = "Clock disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "Clock enabled"] + pub const ENABLED: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Size(pub u8); - impl Size { - #[doc = "Byte (8-bit)"] - pub const BITS8: Self = Self(0); - #[doc = "Half-word (16-bit)"] - pub const BITS16: Self = Self(0x01); - #[doc = "Word (32-bit)"] - pub const BITS32: Self = Self(0x02); + pub struct Mcosel(pub u8); + impl Mcosel { + #[doc = "No clock"] + pub const NOCLOCK: Self = Self(0); + #[doc = "SYSCLK clock selected"] + pub const SYSCLK: Self = Self(0x01); + #[doc = "HSI oscillator clock selected"] + pub const HSI16: Self = Self(0x02); + #[doc = "MSI oscillator clock selected"] + pub const MSI: Self = Self(0x03); + #[doc = "HSE oscillator clock selected"] + pub const HSE: Self = Self(0x04); + #[doc = "PLL clock selected"] + pub const PLL: Self = Self(0x05); + #[doc = "LSI oscillator clock selected"] + pub const LSI: Self = Self(0x06); + #[doc = "LSE oscillator clock selected"] + pub const LSE: Self = Self(0x07); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Lserdy(pub u8); + impl Lserdy { + #[doc = "Oscillator not ready"] + pub const NOTREADY: Self = Self(0); + #[doc = "Oscillator ready"] + pub const READY: Self = Self(0x01); } } - pub mod regs { +} +pub mod i2c_v2 { + use crate::generic::*; + #[doc = "Inter-integrated circuit"] + #[derive(Copy, Clone)] + pub struct I2c(pub *mut u8); + unsafe impl Send for I2c {} + unsafe impl Sync for I2c {} + impl I2c { + #[doc = "Control register 1"] + pub fn cr1(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(0usize)) } + } + #[doc = "Control register 2"] + pub fn cr2(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(4usize)) } + } + #[doc = "Own address register 1"] + pub fn oar1(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(8usize)) } + } + #[doc = "Own address register 2"] + pub fn oar2(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(12usize)) } + } + #[doc = "Timing register"] + pub fn timingr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(16usize)) } + } + #[doc = "Status register 1"] + pub fn timeoutr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(20usize)) } + } + #[doc = "Interrupt and Status register"] + pub fn isr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(24usize)) } + } + #[doc = "Interrupt clear register"] + pub fn icr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(28usize)) } + } + #[doc = "PEC register"] + pub fn pecr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(32usize)) } + } + #[doc = "Receive data register"] + pub fn rxdr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(36usize)) } + } + #[doc = "Transmit data register"] + pub fn txdr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(40usize)) } + } + } + pub mod vals { use crate::generic::*; - #[doc = "stream x number of data register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ndtr(pub u32); - impl Ndtr { - #[doc = "Number of data items to transfer"] - pub const fn ndt(&self) -> u16 { - let val = (self.0 >> 0usize) & 0xffff; - val as u16 - } - #[doc = "Number of data items to transfer"] - pub fn set_ndt(&mut self, val: u16) { - self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Dir(pub u8); + impl Dir { + #[doc = "Write transfer, slave enters receiver mode"] + pub const WRITE: Self = Self(0); + #[doc = "Read transfer, slave enters transmitter mode"] + pub const READ: Self = Self(0x01); } - impl Default for Ndtr { - fn default() -> Ndtr { - Ndtr(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Oamode(pub u8); + impl Oamode { + #[doc = "Own address 1 is a 7-bit address"] + pub const BIT7: Self = Self(0); + #[doc = "Own address 1 is a 10-bit address"] + pub const BIT10: Self = Self(0x01); } - #[doc = "stream x configuration register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr(pub u32); - impl Cr { - #[doc = "Stream enable / flag stream ready when read low"] - pub const fn en(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; - val != 0 - } - #[doc = "Stream enable / flag stream ready when read low"] - pub fn set_en(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); - } - #[doc = "Direct mode error interrupt enable"] - pub const fn dmeie(&self) -> bool { - let val = (self.0 >> 1usize) & 0x01; - val != 0 - } - #[doc = "Direct mode error interrupt enable"] - pub fn set_dmeie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); - } - #[doc = "Transfer error interrupt enable"] - pub const fn teie(&self) -> bool { - let val = (self.0 >> 2usize) & 0x01; - val != 0 - } - #[doc = "Transfer error interrupt enable"] - pub fn set_teie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); - } - #[doc = "Half transfer interrupt enable"] - pub const fn htie(&self) -> bool { - let val = (self.0 >> 3usize) & 0x01; - val != 0 - } - #[doc = "Half transfer interrupt enable"] - pub fn set_htie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); - } - #[doc = "Transfer complete interrupt enable"] - pub const fn tcie(&self) -> bool { - let val = (self.0 >> 4usize) & 0x01; - val != 0 - } - #[doc = "Transfer complete interrupt enable"] - pub fn set_tcie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); - } - #[doc = "Peripheral flow controller"] - pub const fn pfctrl(&self) -> super::vals::Pfctrl { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Pfctrl(val as u8) + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Pecbyte(pub u8); + impl Pecbyte { + #[doc = "No PEC transfer"] + pub const NOPEC: Self = Self(0); + #[doc = "PEC transmission/reception is requested"] + pub const PEC: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Nack(pub u8); + impl Nack { + #[doc = "an ACK is sent after current received byte"] + pub const ACK: Self = Self(0); + #[doc = "a NACK is sent after current received byte"] + pub const NACK: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Oamsk(pub u8); + impl Oamsk { + #[doc = "No mask"] + pub const NOMASK: Self = Self(0); + #[doc = "OA2[1] +is masked and don’t care. Only OA2[7:2] +are compared"] + pub const MASK1: Self = Self(0x01); + #[doc = "OA2[2:1] +are masked and don’t care. Only OA2[7:3] +are compared"] + pub const MASK2: Self = Self(0x02); + #[doc = "OA2[3:1] +are masked and don’t care. Only OA2[7:4] +are compared"] + pub const MASK3: Self = Self(0x03); + #[doc = "OA2[4:1] +are masked and don’t care. Only OA2[7:5] +are compared"] + pub const MASK4: Self = Self(0x04); + #[doc = "OA2[5:1] +are masked and don’t care. Only OA2[7:6] +are compared"] + pub const MASK5: Self = Self(0x05); + #[doc = "OA2[6:1] +are masked and don’t care. Only OA2[7] +is compared."] + pub const MASK6: Self = Self(0x06); + #[doc = "OA2[7:1] +are masked and don’t care. No comparison is done, and all (except reserved) 7-bit received addresses are acknowledged"] + pub const MASK7: Self = Self(0x07); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Stop(pub u8); + impl Stop { + #[doc = "No Stop generation"] + pub const NOSTOP: Self = Self(0); + #[doc = "Stop generation after current byte transfer"] + pub const STOP: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Reload(pub u8); + impl Reload { + #[doc = "The transfer is completed after the NBYTES data transfer (STOP or RESTART will follow)"] + pub const COMPLETED: Self = Self(0); + #[doc = "The transfer is not completed after the NBYTES data transfer (NBYTES will be reloaded)"] + pub const NOTCOMPLETED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Pecerr(pub u8); + impl Pecerr { + #[doc = "Received PEC does match with PEC register"] + pub const MATCH: Self = Self(0); + #[doc = "Received PEC does not match with PEC register"] + pub const NOMATCH: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Autoend(pub u8); + impl Autoend { + #[doc = "Software end mode: TC flag is set when NBYTES data are transferred, stretching SCL low"] + pub const SOFTWARE: Self = Self(0); + #[doc = "Automatic end mode: a STOP condition is automatically sent when NBYTES data are transferred"] + pub const AUTOMATIC: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Start(pub u8); + impl Start { + #[doc = "No Start generation"] + pub const NOSTART: Self = Self(0); + #[doc = "Restart/Start generation"] + pub const START: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Headr(pub u8); + impl Headr { + #[doc = "The master sends the complete 10 bit slave address read sequence"] + pub const COMPLETE: Self = Self(0); + #[doc = "The master only sends the 1st 7 bits of the 10 bit address, followed by Read direction"] + pub const PARTIAL: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct RdWrn(pub u8); + impl RdWrn { + #[doc = "Master requests a write transfer"] + pub const WRITE: Self = Self(0); + #[doc = "Master requests a read transfer"] + pub const READ: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Dnf(pub u8); + impl Dnf { + #[doc = "Digital filter disabled"] + pub const NOFILTER: Self = Self(0); + #[doc = "Digital filter enabled and filtering capability up to 1 tI2CCLK"] + pub const FILTER1: Self = Self(0x01); + #[doc = "Digital filter enabled and filtering capability up to 2 tI2CCLK"] + pub const FILTER2: Self = Self(0x02); + #[doc = "Digital filter enabled and filtering capability up to 3 tI2CCLK"] + pub const FILTER3: Self = Self(0x03); + #[doc = "Digital filter enabled and filtering capability up to 4 tI2CCLK"] + pub const FILTER4: Self = Self(0x04); + #[doc = "Digital filter enabled and filtering capability up to 5 tI2CCLK"] + pub const FILTER5: Self = Self(0x05); + #[doc = "Digital filter enabled and filtering capability up to 6 tI2CCLK"] + pub const FILTER6: Self = Self(0x06); + #[doc = "Digital filter enabled and filtering capability up to 7 tI2CCLK"] + pub const FILTER7: Self = Self(0x07); + #[doc = "Digital filter enabled and filtering capability up to 8 tI2CCLK"] + pub const FILTER8: Self = Self(0x08); + #[doc = "Digital filter enabled and filtering capability up to 9 tI2CCLK"] + pub const FILTER9: Self = Self(0x09); + #[doc = "Digital filter enabled and filtering capability up to 10 tI2CCLK"] + pub const FILTER10: Self = Self(0x0a); + #[doc = "Digital filter enabled and filtering capability up to 11 tI2CCLK"] + pub const FILTER11: Self = Self(0x0b); + #[doc = "Digital filter enabled and filtering capability up to 12 tI2CCLK"] + pub const FILTER12: Self = Self(0x0c); + #[doc = "Digital filter enabled and filtering capability up to 13 tI2CCLK"] + pub const FILTER13: Self = Self(0x0d); + #[doc = "Digital filter enabled and filtering capability up to 14 tI2CCLK"] + pub const FILTER14: Self = Self(0x0e); + #[doc = "Digital filter enabled and filtering capability up to 15 tI2CCLK"] + pub const FILTER15: Self = Self(0x0f); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Add(pub u8); + impl Add { + #[doc = "The master operates in 7-bit addressing mode"] + pub const BIT7: Self = Self(0); + #[doc = "The master operates in 10-bit addressing mode"] + pub const BIT10: Self = Self(0x01); + } + } + pub mod regs { + use crate::generic::*; + #[doc = "Interrupt and Status register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Isr(pub u32); + impl Isr { + #[doc = "Transmit data register empty (transmitters)"] + pub const fn txe(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 } - #[doc = "Peripheral flow controller"] - pub fn set_pfctrl(&mut self, val: super::vals::Pfctrl) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + #[doc = "Transmit data register empty (transmitters)"] + pub fn set_txe(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "Data transfer direction"] - pub const fn dir(&self) -> super::vals::Dir { - let val = (self.0 >> 6usize) & 0x03; - super::vals::Dir(val as u8) + #[doc = "Transmit interrupt status (transmitters)"] + pub const fn txis(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; + val != 0 } - #[doc = "Data transfer direction"] - pub fn set_dir(&mut self, val: super::vals::Dir) { - self.0 = (self.0 & !(0x03 << 6usize)) | (((val.0 as u32) & 0x03) << 6usize); + #[doc = "Transmit interrupt status (transmitters)"] + pub fn set_txis(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - #[doc = "Circular mode"] - pub const fn circ(&self) -> super::vals::Circ { - let val = (self.0 >> 8usize) & 0x01; - super::vals::Circ(val as u8) + #[doc = "Receive data register not empty (receivers)"] + pub const fn rxne(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; + val != 0 } - #[doc = "Circular mode"] - pub fn set_circ(&mut self, val: super::vals::Circ) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); + #[doc = "Receive data register not empty (receivers)"] + pub fn set_rxne(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); } - #[doc = "Peripheral increment mode"] - pub const fn pinc(&self) -> super::vals::Inc { - let val = (self.0 >> 9usize) & 0x01; - super::vals::Inc(val as u8) + #[doc = "Address matched (slave mode)"] + pub const fn addr(&self) -> bool { + let val = (self.0 >> 3usize) & 0x01; + val != 0 } - #[doc = "Peripheral increment mode"] - pub fn set_pinc(&mut self, val: super::vals::Inc) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + #[doc = "Address matched (slave mode)"] + pub fn set_addr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); } - #[doc = "Memory increment mode"] - pub const fn minc(&self) -> super::vals::Inc { - let val = (self.0 >> 10usize) & 0x01; - super::vals::Inc(val as u8) + #[doc = "Not acknowledge received flag"] + pub const fn nackf(&self) -> bool { + let val = (self.0 >> 4usize) & 0x01; + val != 0 } - #[doc = "Memory increment mode"] - pub fn set_minc(&mut self, val: super::vals::Inc) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); + #[doc = "Not acknowledge received flag"] + pub fn set_nackf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); } - #[doc = "Peripheral data size"] - pub const fn psize(&self) -> super::vals::Size { - let val = (self.0 >> 11usize) & 0x03; - super::vals::Size(val as u8) + #[doc = "Stop detection flag"] + pub const fn stopf(&self) -> bool { + let val = (self.0 >> 5usize) & 0x01; + val != 0 } - #[doc = "Peripheral data size"] - pub fn set_psize(&mut self, val: super::vals::Size) { - self.0 = (self.0 & !(0x03 << 11usize)) | (((val.0 as u32) & 0x03) << 11usize); + #[doc = "Stop detection flag"] + pub fn set_stopf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); } - #[doc = "Memory data size"] - pub const fn msize(&self) -> super::vals::Size { - let val = (self.0 >> 13usize) & 0x03; - super::vals::Size(val as u8) + #[doc = "Transfer Complete (master mode)"] + pub const fn tc(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 } - #[doc = "Memory data size"] - pub fn set_msize(&mut self, val: super::vals::Size) { - self.0 = (self.0 & !(0x03 << 13usize)) | (((val.0 as u32) & 0x03) << 13usize); + #[doc = "Transfer Complete (master mode)"] + pub fn set_tc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - #[doc = "Peripheral increment offset size"] - pub const fn pincos(&self) -> super::vals::Pincos { - let val = (self.0 >> 15usize) & 0x01; - super::vals::Pincos(val as u8) + #[doc = "Transfer Complete Reload"] + pub const fn tcr(&self) -> bool { + let val = (self.0 >> 7usize) & 0x01; + val != 0 } - #[doc = "Peripheral increment offset size"] - pub fn set_pincos(&mut self, val: super::vals::Pincos) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + #[doc = "Transfer Complete Reload"] + pub fn set_tcr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); } - #[doc = "Priority level"] - pub const fn pl(&self) -> super::vals::Pl { - let val = (self.0 >> 16usize) & 0x03; - super::vals::Pl(val as u8) + #[doc = "Bus error"] + pub const fn berr(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 } - #[doc = "Priority level"] - pub fn set_pl(&mut self, val: super::vals::Pl) { - self.0 = (self.0 & !(0x03 << 16usize)) | (((val.0 as u32) & 0x03) << 16usize); + #[doc = "Bus error"] + pub fn set_berr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); } - #[doc = "Double buffer mode"] - pub const fn dbm(&self) -> super::vals::Dbm { - let val = (self.0 >> 18usize) & 0x01; - super::vals::Dbm(val as u8) + #[doc = "Arbitration lost"] + pub const fn arlo(&self) -> bool { + let val = (self.0 >> 9usize) & 0x01; + val != 0 } - #[doc = "Double buffer mode"] - pub fn set_dbm(&mut self, val: super::vals::Dbm) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); + #[doc = "Arbitration lost"] + pub fn set_arlo(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); } - #[doc = "Current target (only in double buffer mode)"] - pub const fn ct(&self) -> super::vals::Ct { - let val = (self.0 >> 19usize) & 0x01; - super::vals::Ct(val as u8) + #[doc = "Overrun/Underrun (slave mode)"] + pub const fn ovr(&self) -> bool { + let val = (self.0 >> 10usize) & 0x01; + val != 0 } - #[doc = "Current target (only in double buffer mode)"] - pub fn set_ct(&mut self, val: super::vals::Ct) { - self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); + #[doc = "Overrun/Underrun (slave mode)"] + pub fn set_ovr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); } - #[doc = "Peripheral burst transfer configuration"] - pub const fn pburst(&self) -> super::vals::Burst { - let val = (self.0 >> 21usize) & 0x03; - super::vals::Burst(val as u8) + #[doc = "PEC Error in reception"] + pub const fn pecerr(&self) -> super::vals::Pecerr { + let val = (self.0 >> 11usize) & 0x01; + super::vals::Pecerr(val as u8) } - #[doc = "Peripheral burst transfer configuration"] - pub fn set_pburst(&mut self, val: super::vals::Burst) { - self.0 = (self.0 & !(0x03 << 21usize)) | (((val.0 as u32) & 0x03) << 21usize); + #[doc = "PEC Error in reception"] + pub fn set_pecerr(&mut self, val: super::vals::Pecerr) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); } - #[doc = "Memory burst transfer configuration"] - pub const fn mburst(&self) -> super::vals::Burst { - let val = (self.0 >> 23usize) & 0x03; - super::vals::Burst(val as u8) + #[doc = "Timeout or t_low detection flag"] + pub const fn timeout(&self) -> bool { + let val = (self.0 >> 12usize) & 0x01; + val != 0 } - #[doc = "Memory burst transfer configuration"] - pub fn set_mburst(&mut self, val: super::vals::Burst) { - self.0 = (self.0 & !(0x03 << 23usize)) | (((val.0 as u32) & 0x03) << 23usize); + #[doc = "Timeout or t_low detection flag"] + pub fn set_timeout(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); } - #[doc = "Channel selection"] - pub const fn chsel(&self) -> u8 { - let val = (self.0 >> 25usize) & 0x0f; + #[doc = "SMBus alert"] + pub const fn alert(&self) -> bool { + let val = (self.0 >> 13usize) & 0x01; + val != 0 + } + #[doc = "SMBus alert"] + pub fn set_alert(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); + } + #[doc = "Bus busy"] + pub const fn busy(&self) -> bool { + let val = (self.0 >> 15usize) & 0x01; + val != 0 + } + #[doc = "Bus busy"] + pub fn set_busy(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); + } + #[doc = "Transfer direction (Slave mode)"] + pub const fn dir(&self) -> super::vals::Dir { + let val = (self.0 >> 16usize) & 0x01; + super::vals::Dir(val as u8) + } + #[doc = "Transfer direction (Slave mode)"] + pub fn set_dir(&mut self, val: super::vals::Dir) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + } + #[doc = "Address match code (Slave mode)"] + pub const fn addcode(&self) -> u8 { + let val = (self.0 >> 17usize) & 0x7f; val as u8 } - #[doc = "Channel selection"] - pub fn set_chsel(&mut self, val: u8) { - self.0 = (self.0 & !(0x0f << 25usize)) | (((val as u32) & 0x0f) << 25usize); + #[doc = "Address match code (Slave mode)"] + pub fn set_addcode(&mut self, val: u8) { + self.0 = (self.0 & !(0x7f << 17usize)) | (((val as u32) & 0x7f) << 17usize); } } - impl Default for Cr { - fn default() -> Cr { - Cr(0) + impl Default for Isr { + fn default() -> Isr { + Isr(0) } } - #[doc = "interrupt register"] + #[doc = "Control register 1"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ixr(pub u32); - impl Ixr { - #[doc = "Stream x FIFO error interrupt flag (x=3..0)"] - pub fn feif(&self, n: usize) -> bool { - assert!(n < 4usize); - let offs = 0usize + ([0usize, 6usize, 16usize, 22usize][n] as usize); - let val = (self.0 >> offs) & 0x01; + pub struct Cr1(pub u32); + impl Cr1 { + #[doc = "Peripheral enable"] + pub const fn pe(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; val != 0 } - #[doc = "Stream x FIFO error interrupt flag (x=3..0)"] - pub fn set_feif(&mut self, n: usize, val: bool) { - assert!(n < 4usize); - let offs = 0usize + ([0usize, 6usize, 16usize, 22usize][n] as usize); - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + #[doc = "Peripheral enable"] + pub fn set_pe(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "Stream x direct mode error interrupt flag (x=3..0)"] - pub fn dmeif(&self, n: usize) -> bool { - assert!(n < 4usize); - let offs = 2usize + ([0usize, 6usize, 16usize, 22usize][n] as usize); - let val = (self.0 >> offs) & 0x01; + #[doc = "TX Interrupt enable"] + pub const fn txie(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; val != 0 } - #[doc = "Stream x direct mode error interrupt flag (x=3..0)"] - pub fn set_dmeif(&mut self, n: usize, val: bool) { - assert!(n < 4usize); - let offs = 2usize + ([0usize, 6usize, 16usize, 22usize][n] as usize); - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + #[doc = "TX Interrupt enable"] + pub fn set_txie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - #[doc = "Stream x transfer error interrupt flag (x=3..0)"] - pub fn teif(&self, n: usize) -> bool { - assert!(n < 4usize); - let offs = 3usize + ([0usize, 6usize, 16usize, 22usize][n] as usize); - let val = (self.0 >> offs) & 0x01; + #[doc = "RX Interrupt enable"] + pub const fn rxie(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; val != 0 } - #[doc = "Stream x transfer error interrupt flag (x=3..0)"] - pub fn set_teif(&mut self, n: usize, val: bool) { - assert!(n < 4usize); - let offs = 3usize + ([0usize, 6usize, 16usize, 22usize][n] as usize); - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + #[doc = "RX Interrupt enable"] + pub fn set_rxie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); } - #[doc = "Stream x half transfer interrupt flag (x=3..0)"] - pub fn htif(&self, n: usize) -> bool { - assert!(n < 4usize); - let offs = 4usize + ([0usize, 6usize, 16usize, 22usize][n] as usize); - let val = (self.0 >> offs) & 0x01; + #[doc = "Address match interrupt enable (slave only)"] + pub const fn addrie(&self) -> bool { + let val = (self.0 >> 3usize) & 0x01; val != 0 } - #[doc = "Stream x half transfer interrupt flag (x=3..0)"] - pub fn set_htif(&mut self, n: usize, val: bool) { - assert!(n < 4usize); - let offs = 4usize + ([0usize, 6usize, 16usize, 22usize][n] as usize); - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + #[doc = "Address match interrupt enable (slave only)"] + pub fn set_addrie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); } - #[doc = "Stream x transfer complete interrupt flag (x = 3..0)"] - pub fn tcif(&self, n: usize) -> bool { - assert!(n < 4usize); - let offs = 5usize + ([0usize, 6usize, 16usize, 22usize][n] as usize); - let val = (self.0 >> offs) & 0x01; + #[doc = "Not acknowledge received interrupt enable"] + pub const fn nackie(&self) -> bool { + let val = (self.0 >> 4usize) & 0x01; val != 0 } - #[doc = "Stream x transfer complete interrupt flag (x = 3..0)"] - pub fn set_tcif(&mut self, n: usize, val: bool) { - assert!(n < 4usize); - let offs = 5usize + ([0usize, 6usize, 16usize, 22usize][n] as usize); - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + #[doc = "Not acknowledge received interrupt enable"] + pub fn set_nackie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); } - } - impl Default for Ixr { - fn default() -> Ixr { - Ixr(0) + #[doc = "STOP detection Interrupt enable"] + pub const fn stopie(&self) -> bool { + let val = (self.0 >> 5usize) & 0x01; + val != 0 } - } - #[doc = "stream x FIFO control register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Fcr(pub u32); - impl Fcr { - #[doc = "FIFO threshold selection"] - pub const fn fth(&self) -> super::vals::Fth { - let val = (self.0 >> 0usize) & 0x03; - super::vals::Fth(val as u8) + #[doc = "STOP detection Interrupt enable"] + pub fn set_stopie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); } - #[doc = "FIFO threshold selection"] - pub fn set_fth(&mut self, val: super::vals::Fth) { - self.0 = (self.0 & !(0x03 << 0usize)) | (((val.0 as u32) & 0x03) << 0usize); + #[doc = "Transfer Complete interrupt enable"] + pub const fn tcie(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 } - #[doc = "Direct mode disable"] - pub const fn dmdis(&self) -> super::vals::Dmdis { - let val = (self.0 >> 2usize) & 0x01; - super::vals::Dmdis(val as u8) - } - #[doc = "Direct mode disable"] - pub fn set_dmdis(&mut self, val: super::vals::Dmdis) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); - } - #[doc = "FIFO status"] - pub const fn fs(&self) -> super::vals::Fs { - let val = (self.0 >> 3usize) & 0x07; - super::vals::Fs(val as u8) - } - #[doc = "FIFO status"] - pub fn set_fs(&mut self, val: super::vals::Fs) { - self.0 = (self.0 & !(0x07 << 3usize)) | (((val.0 as u32) & 0x07) << 3usize); + #[doc = "Transfer Complete interrupt enable"] + pub fn set_tcie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - #[doc = "FIFO error interrupt enable"] - pub const fn feie(&self) -> bool { + #[doc = "Error interrupts enable"] + pub const fn errie(&self) -> bool { let val = (self.0 >> 7usize) & 0x01; val != 0 } - #[doc = "FIFO error interrupt enable"] - pub fn set_feie(&mut self, val: bool) { + #[doc = "Error interrupts enable"] + pub fn set_errie(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); } - } - impl Default for Fcr { - fn default() -> Fcr { - Fcr(0) + #[doc = "Digital noise filter"] + pub const fn dnf(&self) -> super::vals::Dnf { + let val = (self.0 >> 8usize) & 0x0f; + super::vals::Dnf(val as u8) } - } - } -} -pub mod gpio_v1 { - use crate::generic::*; - #[doc = "General purpose I/O"] - #[derive(Copy, Clone)] - pub struct Gpio(pub *mut u8); - unsafe impl Send for Gpio {} - unsafe impl Sync for Gpio {} - impl Gpio { - #[doc = "Port configuration register low (GPIOn_CRL)"] - pub fn cr(self, n: usize) -> Reg { - assert!(n < 2usize); - unsafe { Reg::from_ptr(self.0.add(0usize + n * 4usize)) } - } - #[doc = "Port input data register (GPIOn_IDR)"] - pub fn idr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(8usize)) } - } - #[doc = "Port output data register (GPIOn_ODR)"] - pub fn odr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(12usize)) } - } - #[doc = "Port bit set/reset register (GPIOn_BSRR)"] - pub fn bsrr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(16usize)) } - } - #[doc = "Port bit reset register (GPIOn_BRR)"] - pub fn brr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(20usize)) } - } - #[doc = "Port configuration lock register"] - pub fn lckr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(24usize)) } - } - } - pub mod vals { - use crate::generic::*; - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lckk(pub u8); - impl Lckk { - #[doc = "Port configuration lock key not active"] - pub const NOTACTIVE: Self = Self(0); - #[doc = "Port configuration lock key active"] - pub const ACTIVE: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lck(pub u8); - impl Lck { - #[doc = "Port configuration not locked"] - pub const UNLOCKED: Self = Self(0); - #[doc = "Port configuration locked"] - pub const LOCKED: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Bsw(pub u8); - impl Bsw { - #[doc = "No action on the corresponding ODx bit"] - pub const NOACTION: Self = Self(0); - #[doc = "Sets the corresponding ODRx bit"] - pub const SET: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Odr(pub u8); - impl Odr { - #[doc = "Set output to logic low"] - pub const LOW: Self = Self(0); - #[doc = "Set output to logic high"] - pub const HIGH: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Brw(pub u8); - impl Brw { - #[doc = "No action on the corresponding ODx bit"] - pub const NOACTION: Self = Self(0); - #[doc = "Reset the ODx bit"] - pub const RESET: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Mode(pub u8); - impl Mode { - #[doc = "Input mode (reset state)"] - pub const INPUT: Self = Self(0); - #[doc = "Output mode 10 MHz"] - pub const OUTPUT: Self = Self(0x01); - #[doc = "Output mode 2 MHz"] - pub const OUTPUT2: Self = Self(0x02); - #[doc = "Output mode 50 MHz"] - pub const OUTPUT50: Self = Self(0x03); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Cnf(pub u8); - impl Cnf { - #[doc = "Analog mode / Push-Pull mode"] - pub const PUSHPULL: Self = Self(0); - #[doc = "Floating input (reset state) / Open Drain-Mode"] - pub const OPENDRAIN: Self = Self(0x01); - #[doc = "Input with pull-up/pull-down / Alternate Function Push-Pull Mode"] - pub const ALTPUSHPULL: Self = Self(0x02); - #[doc = "Alternate Function Open-Drain Mode"] - pub const ALTOPENDRAIN: Self = Self(0x03); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Idr(pub u8); - impl Idr { - #[doc = "Input is logic low"] - pub const LOW: Self = Self(0); - #[doc = "Input is logic high"] - pub const HIGH: Self = Self(0x01); - } - } - pub mod regs { - use crate::generic::*; - #[doc = "Port bit set/reset register (GPIOn_BSRR)"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Bsrr(pub u32); - impl Bsrr { - #[doc = "Set bit"] - pub fn bs(&self, n: usize) -> bool { - assert!(n < 16usize); - let offs = 0usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; + #[doc = "Digital noise filter"] + pub fn set_dnf(&mut self, val: super::vals::Dnf) { + self.0 = (self.0 & !(0x0f << 8usize)) | (((val.0 as u32) & 0x0f) << 8usize); + } + #[doc = "Analog noise filter OFF"] + pub const fn anfoff(&self) -> bool { + let val = (self.0 >> 12usize) & 0x01; val != 0 } - #[doc = "Set bit"] - pub fn set_bs(&mut self, n: usize, val: bool) { - assert!(n < 16usize); - let offs = 0usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + #[doc = "Analog noise filter OFF"] + pub fn set_anfoff(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); } - #[doc = "Reset bit"] - pub fn br(&self, n: usize) -> bool { - assert!(n < 16usize); - let offs = 16usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; + #[doc = "DMA transmission requests enable"] + pub const fn txdmaen(&self) -> bool { + let val = (self.0 >> 14usize) & 0x01; val != 0 } - #[doc = "Reset bit"] - pub fn set_br(&mut self, n: usize, val: bool) { - assert!(n < 16usize); - let offs = 16usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + #[doc = "DMA transmission requests enable"] + pub fn set_txdmaen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); } - } - impl Default for Bsrr { - fn default() -> Bsrr { - Bsrr(0) + #[doc = "DMA reception requests enable"] + pub const fn rxdmaen(&self) -> bool { + let val = (self.0 >> 15usize) & 0x01; + val != 0 } - } - #[doc = "Port input data register (GPIOn_IDR)"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Idr(pub u32); - impl Idr { - #[doc = "Port input data"] - pub fn idr(&self, n: usize) -> super::vals::Idr { - assert!(n < 16usize); - let offs = 0usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; - super::vals::Idr(val as u8) + #[doc = "DMA reception requests enable"] + pub fn set_rxdmaen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); } - #[doc = "Port input data"] - pub fn set_idr(&mut self, n: usize, val: super::vals::Idr) { - assert!(n < 16usize); - let offs = 0usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); + #[doc = "Slave byte control"] + pub const fn sbc(&self) -> bool { + let val = (self.0 >> 16usize) & 0x01; + val != 0 } - } - impl Default for Idr { - fn default() -> Idr { - Idr(0) + #[doc = "Slave byte control"] + pub fn set_sbc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); } - } - #[doc = "Port output data register (GPIOn_ODR)"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Odr(pub u32); - impl Odr { - #[doc = "Port output data"] - pub fn odr(&self, n: usize) -> super::vals::Odr { - assert!(n < 16usize); - let offs = 0usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; - super::vals::Odr(val as u8) + #[doc = "Clock stretching disable"] + pub const fn nostretch(&self) -> bool { + let val = (self.0 >> 17usize) & 0x01; + val != 0 } - #[doc = "Port output data"] - pub fn set_odr(&mut self, n: usize, val: super::vals::Odr) { - assert!(n < 16usize); - let offs = 0usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); + #[doc = "Clock stretching disable"] + pub fn set_nostretch(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); + } + #[doc = "General call enable"] + pub const fn gcen(&self) -> bool { + let val = (self.0 >> 19usize) & 0x01; + val != 0 + } + #[doc = "General call enable"] + pub fn set_gcen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize); + } + #[doc = "SMBus Host address enable"] + pub const fn smbhen(&self) -> bool { + let val = (self.0 >> 20usize) & 0x01; + val != 0 + } + #[doc = "SMBus Host address enable"] + pub fn set_smbhen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize); + } + #[doc = "SMBus Device Default address enable"] + pub const fn smbden(&self) -> bool { + let val = (self.0 >> 21usize) & 0x01; + val != 0 + } + #[doc = "SMBus Device Default address enable"] + pub fn set_smbden(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); + } + #[doc = "SMBUS alert enable"] + pub const fn alerten(&self) -> bool { + let val = (self.0 >> 22usize) & 0x01; + val != 0 + } + #[doc = "SMBUS alert enable"] + pub fn set_alerten(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); + } + #[doc = "PEC enable"] + pub const fn pecen(&self) -> bool { + let val = (self.0 >> 23usize) & 0x01; + val != 0 + } + #[doc = "PEC enable"] + pub fn set_pecen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize); } } - impl Default for Odr { - fn default() -> Odr { - Odr(0) + impl Default for Cr1 { + fn default() -> Cr1 { + Cr1(0) } } - #[doc = "Port configuration register (GPIOn_CRx)"] + #[doc = "Status register 1"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr(pub u32); - impl Cr { - #[doc = "Port n mode bits"] - pub fn mode(&self, n: usize) -> super::vals::Mode { - assert!(n < 8usize); - let offs = 0usize + n * 4usize; - let val = (self.0 >> offs) & 0x03; - super::vals::Mode(val as u8) + pub struct Timeoutr(pub u32); + impl Timeoutr { + #[doc = "Bus timeout A"] + pub const fn timeouta(&self) -> u16 { + let val = (self.0 >> 0usize) & 0x0fff; + val as u16 } - #[doc = "Port n mode bits"] - pub fn set_mode(&mut self, n: usize, val: super::vals::Mode) { - assert!(n < 8usize); - let offs = 0usize + n * 4usize; - self.0 = (self.0 & !(0x03 << offs)) | (((val.0 as u32) & 0x03) << offs); + #[doc = "Bus timeout A"] + pub fn set_timeouta(&mut self, val: u16) { + self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize); } - #[doc = "Port n configuration bits"] - pub fn cnf(&self, n: usize) -> super::vals::Cnf { - assert!(n < 8usize); - let offs = 2usize + n * 4usize; - let val = (self.0 >> offs) & 0x03; - super::vals::Cnf(val as u8) + #[doc = "Idle clock timeout detection"] + pub const fn tidle(&self) -> bool { + let val = (self.0 >> 12usize) & 0x01; + val != 0 } - #[doc = "Port n configuration bits"] - pub fn set_cnf(&mut self, n: usize, val: super::vals::Cnf) { - assert!(n < 8usize); - let offs = 2usize + n * 4usize; - self.0 = (self.0 & !(0x03 << offs)) | (((val.0 as u32) & 0x03) << offs); + #[doc = "Idle clock timeout detection"] + pub fn set_tidle(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); + } + #[doc = "Clock timeout enable"] + pub const fn timouten(&self) -> bool { + let val = (self.0 >> 15usize) & 0x01; + val != 0 + } + #[doc = "Clock timeout enable"] + pub fn set_timouten(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); + } + #[doc = "Bus timeout B"] + pub const fn timeoutb(&self) -> u16 { + let val = (self.0 >> 16usize) & 0x0fff; + val as u16 + } + #[doc = "Bus timeout B"] + pub fn set_timeoutb(&mut self, val: u16) { + self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize); + } + #[doc = "Extended clock timeout enable"] + pub const fn texten(&self) -> bool { + let val = (self.0 >> 31usize) & 0x01; + val != 0 + } + #[doc = "Extended clock timeout enable"] + pub fn set_texten(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize); } } - impl Default for Cr { - fn default() -> Cr { - Cr(0) + impl Default for Timeoutr { + fn default() -> Timeoutr { + Timeoutr(0) } } - #[doc = "Port configuration lock register"] + #[doc = "Own address register 2"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Lckr(pub u32); - impl Lckr { - #[doc = "Port A Lock bit"] - pub fn lck(&self, n: usize) -> super::vals::Lck { - assert!(n < 16usize); - let offs = 0usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; - super::vals::Lck(val as u8) + pub struct Oar2(pub u32); + impl Oar2 { + #[doc = "Interface address"] + pub const fn oa2(&self) -> u8 { + let val = (self.0 >> 1usize) & 0x7f; + val as u8 } - #[doc = "Port A Lock bit"] - pub fn set_lck(&mut self, n: usize, val: super::vals::Lck) { - assert!(n < 16usize); - let offs = 0usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); + #[doc = "Interface address"] + pub fn set_oa2(&mut self, val: u8) { + self.0 = (self.0 & !(0x7f << 1usize)) | (((val as u32) & 0x7f) << 1usize); } - #[doc = "Lock key"] - pub const fn lckk(&self) -> super::vals::Lckk { - let val = (self.0 >> 16usize) & 0x01; - super::vals::Lckk(val as u8) + #[doc = "Own Address 2 masks"] + pub const fn oa2msk(&self) -> super::vals::Oamsk { + let val = (self.0 >> 8usize) & 0x07; + super::vals::Oamsk(val as u8) } - #[doc = "Lock key"] - pub fn set_lckk(&mut self, val: super::vals::Lckk) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + #[doc = "Own Address 2 masks"] + pub fn set_oa2msk(&mut self, val: super::vals::Oamsk) { + self.0 = (self.0 & !(0x07 << 8usize)) | (((val.0 as u32) & 0x07) << 8usize); + } + #[doc = "Own Address 2 enable"] + pub const fn oa2en(&self) -> bool { + let val = (self.0 >> 15usize) & 0x01; + val != 0 + } + #[doc = "Own Address 2 enable"] + pub fn set_oa2en(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); } } - impl Default for Lckr { - fn default() -> Lckr { - Lckr(0) + impl Default for Oar2 { + fn default() -> Oar2 { + Oar2(0) } } - #[doc = "Port bit reset register (GPIOn_BRR)"] + #[doc = "Interrupt clear register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Brr(pub u32); - impl Brr { - #[doc = "Reset bit"] - pub fn br(&self, n: usize) -> bool { - assert!(n < 16usize); - let offs = 0usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; + pub struct Icr(pub u32); + impl Icr { + #[doc = "Address Matched flag clear"] + pub const fn addrcf(&self) -> bool { + let val = (self.0 >> 3usize) & 0x01; val != 0 } - #[doc = "Reset bit"] - pub fn set_br(&mut self, n: usize, val: bool) { - assert!(n < 16usize); - let offs = 0usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + #[doc = "Address Matched flag clear"] + pub fn set_addrcf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); } - } - impl Default for Brr { - fn default() -> Brr { - Brr(0) + #[doc = "Not Acknowledge flag clear"] + pub const fn nackcf(&self) -> bool { + let val = (self.0 >> 4usize) & 0x01; + val != 0 + } + #[doc = "Not Acknowledge flag clear"] + pub fn set_nackcf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); + } + #[doc = "Stop detection flag clear"] + pub const fn stopcf(&self) -> bool { + let val = (self.0 >> 5usize) & 0x01; + val != 0 + } + #[doc = "Stop detection flag clear"] + pub fn set_stopcf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); + } + #[doc = "Bus error flag clear"] + pub const fn berrcf(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 + } + #[doc = "Bus error flag clear"] + pub fn set_berrcf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + } + #[doc = "Arbitration lost flag clear"] + pub const fn arlocf(&self) -> bool { + let val = (self.0 >> 9usize) & 0x01; + val != 0 + } + #[doc = "Arbitration lost flag clear"] + pub fn set_arlocf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + } + #[doc = "Overrun/Underrun flag clear"] + pub const fn ovrcf(&self) -> bool { + let val = (self.0 >> 10usize) & 0x01; + val != 0 + } + #[doc = "Overrun/Underrun flag clear"] + pub fn set_ovrcf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); + } + #[doc = "PEC Error flag clear"] + pub const fn peccf(&self) -> bool { + let val = (self.0 >> 11usize) & 0x01; + val != 0 + } + #[doc = "PEC Error flag clear"] + pub fn set_peccf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); + } + #[doc = "Timeout detection flag clear"] + pub const fn timoutcf(&self) -> bool { + let val = (self.0 >> 12usize) & 0x01; + val != 0 + } + #[doc = "Timeout detection flag clear"] + pub fn set_timoutcf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); + } + #[doc = "Alert flag clear"] + pub const fn alertcf(&self) -> bool { + let val = (self.0 >> 13usize) & 0x01; + val != 0 + } + #[doc = "Alert flag clear"] + pub fn set_alertcf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); } } - } -} -pub mod rcc_h7 { - use crate::generic::*; - #[doc = "Reset and clock control"] - #[derive(Copy, Clone)] - pub struct Rcc(pub *mut u8); - unsafe impl Send for Rcc {} - unsafe impl Sync for Rcc {} - impl Rcc { - #[doc = "clock control register"] - pub fn cr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(0usize)) } - } - #[doc = "RCC HSI configuration register"] - pub fn hsicfgr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(4usize)) } - } - #[doc = "RCC Internal Clock Source Calibration Register"] - pub fn icscr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(4usize)) } - } - #[doc = "RCC Clock Recovery RC Register"] - pub fn crrcr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(8usize)) } - } - #[doc = "RCC CSI configuration register"] - pub fn csicfgr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(12usize)) } - } - #[doc = "RCC Clock Configuration Register"] - pub fn cfgr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(16usize)) } - } - #[doc = "RCC Domain 1 Clock Configuration Register"] - pub fn d1cfgr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(24usize)) } - } - #[doc = "RCC Domain 2 Clock Configuration Register"] - pub fn d2cfgr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(28usize)) } - } - #[doc = "RCC Domain 3 Clock Configuration Register"] - pub fn d3cfgr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(32usize)) } - } - #[doc = "RCC PLLs Clock Source Selection Register"] - pub fn pllckselr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(40usize)) } - } - #[doc = "RCC PLLs Configuration Register"] - pub fn pllcfgr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(44usize)) } - } - #[doc = "RCC PLL1 Dividers Configuration Register"] - pub fn plldivr(self, n: usize) -> Reg { - assert!(n < 3usize); - unsafe { Reg::from_ptr(self.0.add(48usize + n * 8usize)) } - } - #[doc = "RCC PLL1 Fractional Divider Register"] - pub fn pllfracr(self, n: usize) -> Reg { - assert!(n < 3usize); - unsafe { Reg::from_ptr(self.0.add(52usize + n * 8usize)) } - } - #[doc = "RCC Domain 1 Kernel Clock Configuration Register"] - pub fn d1ccipr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(76usize)) } - } - #[doc = "RCC Domain 2 Kernel Clock Configuration Register"] - pub fn d2ccip1r(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(80usize)) } - } - #[doc = "RCC Domain 2 Kernel Clock Configuration Register"] - pub fn d2ccip2r(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(84usize)) } - } - #[doc = "RCC Domain 3 Kernel Clock Configuration Register"] - pub fn d3ccipr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(88usize)) } - } - #[doc = "RCC Clock Source Interrupt Enable Register"] - pub fn cier(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(96usize)) } - } - #[doc = "RCC Clock Source Interrupt Flag Register"] - pub fn cifr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(100usize)) } - } - #[doc = "RCC Clock Source Interrupt Clear Register"] - pub fn cicr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(104usize)) } - } - #[doc = "RCC Backup Domain Control Register"] - pub fn bdcr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(112usize)) } - } - #[doc = "RCC Clock Control and Status Register"] - pub fn csr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(116usize)) } - } - #[doc = "RCC AHB3 Reset Register"] - pub fn ahb3rstr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(124usize)) } - } - #[doc = "RCC AHB1 Peripheral Reset Register"] - pub fn ahb1rstr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(128usize)) } - } - #[doc = "RCC AHB2 Peripheral Reset Register"] - pub fn ahb2rstr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(132usize)) } - } - #[doc = "RCC AHB4 Peripheral Reset Register"] - pub fn ahb4rstr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(136usize)) } - } - #[doc = "RCC APB3 Peripheral Reset Register"] - pub fn apb3rstr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(140usize)) } - } - #[doc = "RCC APB1 Peripheral Reset Register"] - pub fn apb1lrstr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(144usize)) } - } - #[doc = "RCC APB1 Peripheral Reset Register"] - pub fn apb1hrstr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(148usize)) } - } - #[doc = "RCC APB2 Peripheral Reset Register"] - pub fn apb2rstr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(152usize)) } - } - #[doc = "RCC APB4 Peripheral Reset Register"] - pub fn apb4rstr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(156usize)) } + impl Default for Icr { + fn default() -> Icr { + Icr(0) + } } - #[doc = "RCC Global Control Register"] - pub fn gcr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(160usize)) } + #[doc = "PEC register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Pecr(pub u32); + impl Pecr { + #[doc = "Packet error checking register"] + pub const fn pec(&self) -> u8 { + let val = (self.0 >> 0usize) & 0xff; + val as u8 + } + #[doc = "Packet error checking register"] + pub fn set_pec(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize); + } } - #[doc = "RCC D3 Autonomous mode Register"] - pub fn d3amr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(168usize)) } + impl Default for Pecr { + fn default() -> Pecr { + Pecr(0) + } } - #[doc = "RCC Reset Status Register"] - pub fn rsr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(208usize)) } + #[doc = "Own address register 1"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Oar1(pub u32); + impl Oar1 { + #[doc = "Interface address"] + pub const fn oa1(&self) -> u16 { + let val = (self.0 >> 0usize) & 0x03ff; + val as u16 + } + #[doc = "Interface address"] + pub fn set_oa1(&mut self, val: u16) { + self.0 = (self.0 & !(0x03ff << 0usize)) | (((val as u32) & 0x03ff) << 0usize); + } + #[doc = "Own Address 1 10-bit mode"] + pub const fn oa1mode(&self) -> super::vals::Oamode { + let val = (self.0 >> 10usize) & 0x01; + super::vals::Oamode(val as u8) + } + #[doc = "Own Address 1 10-bit mode"] + pub fn set_oa1mode(&mut self, val: super::vals::Oamode) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); + } + #[doc = "Own Address 1 enable"] + pub const fn oa1en(&self) -> bool { + let val = (self.0 >> 15usize) & 0x01; + val != 0 + } + #[doc = "Own Address 1 enable"] + pub fn set_oa1en(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); + } } - #[doc = "RCC AHB3 Clock Register"] - pub fn ahb3enr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(212usize)) } + impl Default for Oar1 { + fn default() -> Oar1 { + Oar1(0) + } } - #[doc = "RCC AHB1 Clock Register"] - pub fn ahb1enr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(216usize)) } + #[doc = "Receive data register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Rxdr(pub u32); + impl Rxdr { + #[doc = "8-bit receive data"] + pub const fn rxdata(&self) -> u8 { + let val = (self.0 >> 0usize) & 0xff; + val as u8 + } + #[doc = "8-bit receive data"] + pub fn set_rxdata(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize); + } } - #[doc = "RCC AHB2 Clock Register"] - pub fn ahb2enr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(220usize)) } + impl Default for Rxdr { + fn default() -> Rxdr { + Rxdr(0) + } } - #[doc = "RCC AHB4 Clock Register"] - pub fn ahb4enr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(224usize)) } - } - #[doc = "RCC APB3 Clock Register"] - pub fn apb3enr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(228usize)) } - } - #[doc = "RCC APB1 Clock Register"] - pub fn apb1lenr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(232usize)) } - } - #[doc = "RCC APB1 Clock Register"] - pub fn apb1henr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(236usize)) } - } - #[doc = "RCC APB2 Clock Register"] - pub fn apb2enr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(240usize)) } - } - #[doc = "RCC APB4 Clock Register"] - pub fn apb4enr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(244usize)) } - } - #[doc = "RCC AHB3 Sleep Clock Register"] - pub fn ahb3lpenr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(252usize)) } - } - #[doc = "RCC AHB1 Sleep Clock Register"] - pub fn ahb1lpenr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(256usize)) } - } - #[doc = "RCC AHB2 Sleep Clock Register"] - pub fn ahb2lpenr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(260usize)) } - } - #[doc = "RCC AHB4 Sleep Clock Register"] - pub fn ahb4lpenr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(264usize)) } - } - #[doc = "RCC APB3 Sleep Clock Register"] - pub fn apb3lpenr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(268usize)) } - } - #[doc = "RCC APB1 Low Sleep Clock Register"] - pub fn apb1llpenr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(272usize)) } - } - #[doc = "RCC APB1 High Sleep Clock Register"] - pub fn apb1hlpenr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(276usize)) } - } - #[doc = "RCC APB2 Sleep Clock Register"] - pub fn apb2lpenr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(280usize)) } - } - #[doc = "RCC APB4 Sleep Clock Register"] - pub fn apb4lpenr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(284usize)) } - } - #[doc = "RCC Reset Status Register"] - pub fn c1_rsr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(304usize)) } - } - #[doc = "RCC AHB3 Clock Register"] - pub fn c1_ahb3enr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(308usize)) } - } - #[doc = "RCC AHB1 Clock Register"] - pub fn c1_ahb1enr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(312usize)) } - } - #[doc = "RCC AHB2 Clock Register"] - pub fn c1_ahb2enr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(316usize)) } - } - #[doc = "RCC AHB4 Clock Register"] - pub fn c1_ahb4enr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(320usize)) } - } - #[doc = "RCC APB3 Clock Register"] - pub fn c1_apb3enr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(324usize)) } - } - #[doc = "RCC APB1 Clock Register"] - pub fn c1_apb1lenr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(328usize)) } - } - #[doc = "RCC APB1 Clock Register"] - pub fn c1_apb1henr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(332usize)) } - } - #[doc = "RCC APB2 Clock Register"] - pub fn c1_apb2enr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(336usize)) } - } - #[doc = "RCC APB4 Clock Register"] - pub fn c1_apb4enr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(340usize)) } - } - #[doc = "RCC AHB3 Sleep Clock Register"] - pub fn c1_ahb3lpenr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(348usize)) } - } - #[doc = "RCC AHB1 Sleep Clock Register"] - pub fn c1_ahb1lpenr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(352usize)) } - } - #[doc = "RCC AHB2 Sleep Clock Register"] - pub fn c1_ahb2lpenr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(356usize)) } - } - #[doc = "RCC AHB4 Sleep Clock Register"] - pub fn c1_ahb4lpenr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(360usize)) } - } - #[doc = "RCC APB3 Sleep Clock Register"] - pub fn c1_apb3lpenr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(364usize)) } - } - #[doc = "RCC APB1 Low Sleep Clock Register"] - pub fn c1_apb1llpenr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(368usize)) } - } - #[doc = "RCC APB1 High Sleep Clock Register"] - pub fn c1_apb1hlpenr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(372usize)) } - } - #[doc = "RCC APB2 Sleep Clock Register"] - pub fn c1_apb2lpenr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(376usize)) } - } - #[doc = "RCC APB4 Sleep Clock Register"] - pub fn c1_apb4lpenr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(380usize)) } - } - } - pub mod regs { - use crate::generic::*; - #[doc = "RCC APB1 Peripheral Reset Register"] + #[doc = "Control register 2"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Apb1hrstr(pub u32); - impl Apb1hrstr { - #[doc = "Clock Recovery System reset"] - pub const fn crsrst(&self) -> super::vals::Crsrst { - let val = (self.0 >> 1usize) & 0x01; - super::vals::Crsrst(val as u8) + pub struct Cr2(pub u32); + impl Cr2 { + #[doc = "Slave address bit (master mode)"] + pub const fn sadd(&self) -> u16 { + let val = (self.0 >> 0usize) & 0x03ff; + val as u16 } - #[doc = "Clock Recovery System reset"] - pub fn set_crsrst(&mut self, val: super::vals::Crsrst) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + #[doc = "Slave address bit (master mode)"] + pub fn set_sadd(&mut self, val: u16) { + self.0 = (self.0 & !(0x03ff << 0usize)) | (((val as u32) & 0x03ff) << 0usize); } - #[doc = "SWPMI block reset"] - pub const fn swprst(&self) -> super::vals::Crsrst { - let val = (self.0 >> 2usize) & 0x01; - super::vals::Crsrst(val as u8) + #[doc = "Transfer direction (master mode)"] + pub const fn rd_wrn(&self) -> super::vals::RdWrn { + let val = (self.0 >> 10usize) & 0x01; + super::vals::RdWrn(val as u8) } - #[doc = "SWPMI block reset"] - pub fn set_swprst(&mut self, val: super::vals::Crsrst) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); + #[doc = "Transfer direction (master mode)"] + pub fn set_rd_wrn(&mut self, val: super::vals::RdWrn) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); } - #[doc = "OPAMP block reset"] - pub const fn opamprst(&self) -> super::vals::Crsrst { - let val = (self.0 >> 4usize) & 0x01; - super::vals::Crsrst(val as u8) + #[doc = "10-bit addressing mode (master mode)"] + pub const fn add10(&self) -> super::vals::Add { + let val = (self.0 >> 11usize) & 0x01; + super::vals::Add(val as u8) } - #[doc = "OPAMP block reset"] - pub fn set_opamprst(&mut self, val: super::vals::Crsrst) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + #[doc = "10-bit addressing mode (master mode)"] + pub fn set_add10(&mut self, val: super::vals::Add) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); } - #[doc = "MDIOS block reset"] - pub const fn mdiosrst(&self) -> super::vals::Crsrst { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Crsrst(val as u8) + #[doc = "10-bit address header only read direction (master receiver mode)"] + pub const fn head10r(&self) -> super::vals::Headr { + let val = (self.0 >> 12usize) & 0x01; + super::vals::Headr(val as u8) } - #[doc = "MDIOS block reset"] - pub fn set_mdiosrst(&mut self, val: super::vals::Crsrst) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + #[doc = "10-bit address header only read direction (master receiver mode)"] + pub fn set_head10r(&mut self, val: super::vals::Headr) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); } - #[doc = "FDCAN block reset"] - pub const fn fdcanrst(&self) -> super::vals::Crsrst { - let val = (self.0 >> 8usize) & 0x01; - super::vals::Crsrst(val as u8) + #[doc = "Start generation"] + pub const fn start(&self) -> super::vals::Start { + let val = (self.0 >> 13usize) & 0x01; + super::vals::Start(val as u8) } - #[doc = "FDCAN block reset"] - pub fn set_fdcanrst(&mut self, val: super::vals::Crsrst) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); + #[doc = "Start generation"] + pub fn set_start(&mut self, val: super::vals::Start) { + self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize); } - } - impl Default for Apb1hrstr { - fn default() -> Apb1hrstr { - Apb1hrstr(0) + #[doc = "Stop generation (master mode)"] + pub const fn stop(&self) -> super::vals::Stop { + let val = (self.0 >> 14usize) & 0x01; + super::vals::Stop(val as u8) } - } - #[doc = "RCC Clock Source Interrupt Enable Register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cier(pub u32); - impl Cier { - #[doc = "LSI ready Interrupt Enable"] - pub const fn lsirdyie(&self) -> super::vals::Lsirdyie { - let val = (self.0 >> 0usize) & 0x01; - super::vals::Lsirdyie(val as u8) + #[doc = "Stop generation (master mode)"] + pub fn set_stop(&mut self, val: super::vals::Stop) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); } - #[doc = "LSI ready Interrupt Enable"] - pub fn set_lsirdyie(&mut self, val: super::vals::Lsirdyie) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + #[doc = "NACK generation (slave mode)"] + pub const fn nack(&self) -> super::vals::Nack { + let val = (self.0 >> 15usize) & 0x01; + super::vals::Nack(val as u8) } - #[doc = "LSE ready Interrupt Enable"] - pub const fn lserdyie(&self) -> super::vals::Lsirdyie { - let val = (self.0 >> 1usize) & 0x01; - super::vals::Lsirdyie(val as u8) + #[doc = "NACK generation (slave mode)"] + pub fn set_nack(&mut self, val: super::vals::Nack) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); } - #[doc = "LSE ready Interrupt Enable"] - pub fn set_lserdyie(&mut self, val: super::vals::Lsirdyie) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + #[doc = "Number of bytes"] + pub const fn nbytes(&self) -> u8 { + let val = (self.0 >> 16usize) & 0xff; + val as u8 } - #[doc = "HSI ready Interrupt Enable"] - pub const fn hsirdyie(&self) -> super::vals::Lsirdyie { - let val = (self.0 >> 2usize) & 0x01; - super::vals::Lsirdyie(val as u8) - } - #[doc = "HSI ready Interrupt Enable"] - pub fn set_hsirdyie(&mut self, val: super::vals::Lsirdyie) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); - } - #[doc = "HSE ready Interrupt Enable"] - pub const fn hserdyie(&self) -> super::vals::Lsirdyie { - let val = (self.0 >> 3usize) & 0x01; - super::vals::Lsirdyie(val as u8) - } - #[doc = "HSE ready Interrupt Enable"] - pub fn set_hserdyie(&mut self, val: super::vals::Lsirdyie) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); - } - #[doc = "CSI ready Interrupt Enable"] - pub const fn csirdyie(&self) -> super::vals::Lsirdyie { - let val = (self.0 >> 4usize) & 0x01; - super::vals::Lsirdyie(val as u8) - } - #[doc = "CSI ready Interrupt Enable"] - pub fn set_csirdyie(&mut self, val: super::vals::Lsirdyie) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + #[doc = "Number of bytes"] + pub fn set_nbytes(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 16usize)) | (((val as u32) & 0xff) << 16usize); } - #[doc = "RC48 ready Interrupt Enable"] - pub const fn hsi48rdyie(&self) -> super::vals::Lsirdyie { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Lsirdyie(val as u8) + #[doc = "NBYTES reload mode"] + pub const fn reload(&self) -> super::vals::Reload { + let val = (self.0 >> 24usize) & 0x01; + super::vals::Reload(val as u8) } - #[doc = "RC48 ready Interrupt Enable"] - pub fn set_hsi48rdyie(&mut self, val: super::vals::Lsirdyie) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + #[doc = "NBYTES reload mode"] + pub fn set_reload(&mut self, val: super::vals::Reload) { + self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); } - #[doc = "PLL1 ready Interrupt Enable"] - pub fn pllrdyie(&self, n: usize) -> super::vals::Lsirdyie { - assert!(n < 3usize); - let offs = 6usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; - super::vals::Lsirdyie(val as u8) + #[doc = "Automatic end mode (master mode)"] + pub const fn autoend(&self) -> super::vals::Autoend { + let val = (self.0 >> 25usize) & 0x01; + super::vals::Autoend(val as u8) } - #[doc = "PLL1 ready Interrupt Enable"] - pub fn set_pllrdyie(&mut self, n: usize, val: super::vals::Lsirdyie) { - assert!(n < 3usize); - let offs = 6usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); + #[doc = "Automatic end mode (master mode)"] + pub fn set_autoend(&mut self, val: super::vals::Autoend) { + self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize); } - #[doc = "LSE clock security system Interrupt Enable"] - pub const fn lsecssie(&self) -> super::vals::Lsirdyie { - let val = (self.0 >> 9usize) & 0x01; - super::vals::Lsirdyie(val as u8) + #[doc = "Packet error checking byte"] + pub const fn pecbyte(&self) -> super::vals::Pecbyte { + let val = (self.0 >> 26usize) & 0x01; + super::vals::Pecbyte(val as u8) } - #[doc = "LSE clock security system Interrupt Enable"] - pub fn set_lsecssie(&mut self, val: super::vals::Lsirdyie) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + #[doc = "Packet error checking byte"] + pub fn set_pecbyte(&mut self, val: super::vals::Pecbyte) { + self.0 = (self.0 & !(0x01 << 26usize)) | (((val.0 as u32) & 0x01) << 26usize); } } - impl Default for Cier { - fn default() -> Cier { - Cier(0) + impl Default for Cr2 { + fn default() -> Cr2 { + Cr2(0) } } - #[doc = "RCC AHB4 Peripheral Reset Register"] + #[doc = "Timing register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ahb4rstr(pub u32); - impl Ahb4rstr { - #[doc = "GPIO block reset"] - pub const fn gpioarst(&self) -> super::vals::Gpioarst { - let val = (self.0 >> 0usize) & 0x01; - super::vals::Gpioarst(val as u8) - } - #[doc = "GPIO block reset"] - pub fn set_gpioarst(&mut self, val: super::vals::Gpioarst) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); - } - #[doc = "GPIO block reset"] - pub const fn gpiobrst(&self) -> super::vals::Gpioarst { - let val = (self.0 >> 1usize) & 0x01; - super::vals::Gpioarst(val as u8) - } - #[doc = "GPIO block reset"] - pub fn set_gpiobrst(&mut self, val: super::vals::Gpioarst) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); - } - #[doc = "GPIO block reset"] - pub const fn gpiocrst(&self) -> super::vals::Gpioarst { - let val = (self.0 >> 2usize) & 0x01; - super::vals::Gpioarst(val as u8) - } - #[doc = "GPIO block reset"] - pub fn set_gpiocrst(&mut self, val: super::vals::Gpioarst) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); - } - #[doc = "GPIO block reset"] - pub const fn gpiodrst(&self) -> super::vals::Gpioarst { - let val = (self.0 >> 3usize) & 0x01; - super::vals::Gpioarst(val as u8) - } - #[doc = "GPIO block reset"] - pub fn set_gpiodrst(&mut self, val: super::vals::Gpioarst) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); - } - #[doc = "GPIO block reset"] - pub const fn gpioerst(&self) -> super::vals::Gpioarst { - let val = (self.0 >> 4usize) & 0x01; - super::vals::Gpioarst(val as u8) - } - #[doc = "GPIO block reset"] - pub fn set_gpioerst(&mut self, val: super::vals::Gpioarst) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); - } - #[doc = "GPIO block reset"] - pub const fn gpiofrst(&self) -> super::vals::Gpioarst { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Gpioarst(val as u8) - } - #[doc = "GPIO block reset"] - pub fn set_gpiofrst(&mut self, val: super::vals::Gpioarst) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); - } - #[doc = "GPIO block reset"] - pub const fn gpiogrst(&self) -> super::vals::Gpioarst { - let val = (self.0 >> 6usize) & 0x01; - super::vals::Gpioarst(val as u8) - } - #[doc = "GPIO block reset"] - pub fn set_gpiogrst(&mut self, val: super::vals::Gpioarst) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); - } - #[doc = "GPIO block reset"] - pub const fn gpiohrst(&self) -> super::vals::Gpioarst { - let val = (self.0 >> 7usize) & 0x01; - super::vals::Gpioarst(val as u8) - } - #[doc = "GPIO block reset"] - pub fn set_gpiohrst(&mut self, val: super::vals::Gpioarst) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); - } - #[doc = "GPIO block reset"] - pub const fn gpioirst(&self) -> super::vals::Gpioarst { - let val = (self.0 >> 8usize) & 0x01; - super::vals::Gpioarst(val as u8) - } - #[doc = "GPIO block reset"] - pub fn set_gpioirst(&mut self, val: super::vals::Gpioarst) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); - } - #[doc = "GPIO block reset"] - pub const fn gpiojrst(&self) -> super::vals::Gpioarst { - let val = (self.0 >> 9usize) & 0x01; - super::vals::Gpioarst(val as u8) - } - #[doc = "GPIO block reset"] - pub fn set_gpiojrst(&mut self, val: super::vals::Gpioarst) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); - } - #[doc = "GPIO block reset"] - pub const fn gpiokrst(&self) -> super::vals::Gpioarst { - let val = (self.0 >> 10usize) & 0x01; - super::vals::Gpioarst(val as u8) + pub struct Timingr(pub u32); + impl Timingr { + #[doc = "SCL low period (master mode)"] + pub const fn scll(&self) -> u8 { + let val = (self.0 >> 0usize) & 0xff; + val as u8 } - #[doc = "GPIO block reset"] - pub fn set_gpiokrst(&mut self, val: super::vals::Gpioarst) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); + #[doc = "SCL low period (master mode)"] + pub fn set_scll(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize); } - #[doc = "CRC block reset"] - pub const fn crcrst(&self) -> super::vals::Gpioarst { - let val = (self.0 >> 19usize) & 0x01; - super::vals::Gpioarst(val as u8) + #[doc = "SCL high period (master mode)"] + pub const fn sclh(&self) -> u8 { + let val = (self.0 >> 8usize) & 0xff; + val as u8 } - #[doc = "CRC block reset"] - pub fn set_crcrst(&mut self, val: super::vals::Gpioarst) { - self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); + #[doc = "SCL high period (master mode)"] + pub fn set_sclh(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 8usize)) | (((val as u32) & 0xff) << 8usize); } - #[doc = "BDMA block reset"] - pub const fn bdmarst(&self) -> super::vals::Gpioarst { - let val = (self.0 >> 21usize) & 0x01; - super::vals::Gpioarst(val as u8) + #[doc = "Data hold time"] + pub const fn sdadel(&self) -> u8 { + let val = (self.0 >> 16usize) & 0x0f; + val as u8 } - #[doc = "BDMA block reset"] - pub fn set_bdmarst(&mut self, val: super::vals::Gpioarst) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); + #[doc = "Data hold time"] + pub fn set_sdadel(&mut self, val: u8) { + self.0 = (self.0 & !(0x0f << 16usize)) | (((val as u32) & 0x0f) << 16usize); } - #[doc = "ADC3 block reset"] - pub const fn adc3rst(&self) -> super::vals::Gpioarst { - let val = (self.0 >> 24usize) & 0x01; - super::vals::Gpioarst(val as u8) + #[doc = "Data setup time"] + pub const fn scldel(&self) -> u8 { + let val = (self.0 >> 20usize) & 0x0f; + val as u8 } - #[doc = "ADC3 block reset"] - pub fn set_adc3rst(&mut self, val: super::vals::Gpioarst) { - self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); + #[doc = "Data setup time"] + pub fn set_scldel(&mut self, val: u8) { + self.0 = (self.0 & !(0x0f << 20usize)) | (((val as u32) & 0x0f) << 20usize); } - #[doc = "HSEM block reset"] - pub const fn hsemrst(&self) -> super::vals::Gpioarst { - let val = (self.0 >> 25usize) & 0x01; - super::vals::Gpioarst(val as u8) + #[doc = "Timing prescaler"] + pub const fn presc(&self) -> u8 { + let val = (self.0 >> 28usize) & 0x0f; + val as u8 } - #[doc = "HSEM block reset"] - pub fn set_hsemrst(&mut self, val: super::vals::Gpioarst) { - self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize); + #[doc = "Timing prescaler"] + pub fn set_presc(&mut self, val: u8) { + self.0 = (self.0 & !(0x0f << 28usize)) | (((val as u32) & 0x0f) << 28usize); } } - impl Default for Ahb4rstr { - fn default() -> Ahb4rstr { - Ahb4rstr(0) + impl Default for Timingr { + fn default() -> Timingr { + Timingr(0) } } - #[doc = "clock control register"] + #[doc = "Transmit data register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr(pub u32); - impl Cr { - #[doc = "Internal high-speed clock enable"] - pub const fn hsion(&self) -> super::vals::Hsion { - let val = (self.0 >> 0usize) & 0x01; - super::vals::Hsion(val as u8) - } - #[doc = "Internal high-speed clock enable"] - pub fn set_hsion(&mut self, val: super::vals::Hsion) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); - } - #[doc = "High Speed Internal clock enable in Stop mode"] - pub const fn hsikeron(&self) -> super::vals::Hsion { - let val = (self.0 >> 1usize) & 0x01; - super::vals::Hsion(val as u8) - } - #[doc = "High Speed Internal clock enable in Stop mode"] - pub fn set_hsikeron(&mut self, val: super::vals::Hsion) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); - } - #[doc = "HSI clock ready flag"] - pub const fn hsirdy(&self) -> bool { - let val = (self.0 >> 2usize) & 0x01; - val != 0 - } - #[doc = "HSI clock ready flag"] - pub fn set_hsirdy(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); - } - #[doc = "HSI clock divider"] - pub const fn hsidiv(&self) -> super::vals::Hsidiv { - let val = (self.0 >> 3usize) & 0x03; - super::vals::Hsidiv(val as u8) - } - #[doc = "HSI clock divider"] - pub fn set_hsidiv(&mut self, val: super::vals::Hsidiv) { - self.0 = (self.0 & !(0x03 << 3usize)) | (((val.0 as u32) & 0x03) << 3usize); - } - #[doc = "HSI divider flag"] - pub const fn hsidivf(&self) -> bool { - let val = (self.0 >> 5usize) & 0x01; - val != 0 - } - #[doc = "HSI divider flag"] - pub fn set_hsidivf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); - } - #[doc = "CSI clock enable"] - pub const fn csion(&self) -> super::vals::Hsion { - let val = (self.0 >> 7usize) & 0x01; - super::vals::Hsion(val as u8) - } - #[doc = "CSI clock enable"] - pub fn set_csion(&mut self, val: super::vals::Hsion) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); - } - #[doc = "CSI clock ready flag"] - pub const fn csirdy(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; - val != 0 - } - #[doc = "CSI clock ready flag"] - pub fn set_csirdy(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); - } - #[doc = "CSI clock enable in Stop mode"] - pub const fn csikeron(&self) -> super::vals::Hsion { - let val = (self.0 >> 9usize) & 0x01; - super::vals::Hsion(val as u8) - } - #[doc = "CSI clock enable in Stop mode"] - pub fn set_csikeron(&mut self, val: super::vals::Hsion) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); - } - #[doc = "RC48 clock enable"] - pub const fn hsi48on(&self) -> super::vals::Hsion { - let val = (self.0 >> 12usize) & 0x01; - super::vals::Hsion(val as u8) - } - #[doc = "RC48 clock enable"] - pub fn set_hsi48on(&mut self, val: super::vals::Hsion) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); - } - #[doc = "RC48 clock ready flag"] - pub const fn hsi48rdy(&self) -> bool { - let val = (self.0 >> 13usize) & 0x01; - val != 0 - } - #[doc = "RC48 clock ready flag"] - pub fn set_hsi48rdy(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); - } - #[doc = "D1 domain clocks ready flag"] - pub const fn d1ckrdy(&self) -> bool { - let val = (self.0 >> 14usize) & 0x01; - val != 0 - } - #[doc = "D1 domain clocks ready flag"] - pub fn set_d1ckrdy(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); - } - #[doc = "D2 domain clocks ready flag"] - pub const fn d2ckrdy(&self) -> bool { - let val = (self.0 >> 15usize) & 0x01; - val != 0 - } - #[doc = "D2 domain clocks ready flag"] - pub fn set_d2ckrdy(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); - } - #[doc = "HSE clock enable"] - pub const fn hseon(&self) -> super::vals::Hsion { - let val = (self.0 >> 16usize) & 0x01; - super::vals::Hsion(val as u8) - } - #[doc = "HSE clock enable"] - pub fn set_hseon(&mut self, val: super::vals::Hsion) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); - } - #[doc = "HSE clock ready flag"] - pub const fn hserdy(&self) -> bool { - let val = (self.0 >> 17usize) & 0x01; - val != 0 - } - #[doc = "HSE clock ready flag"] - pub fn set_hserdy(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); - } - #[doc = "HSE clock bypass"] - pub const fn hsebyp(&self) -> super::vals::Hsebyp { - let val = (self.0 >> 18usize) & 0x01; - super::vals::Hsebyp(val as u8) - } - #[doc = "HSE clock bypass"] - pub fn set_hsebyp(&mut self, val: super::vals::Hsebyp) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); - } - #[doc = "HSE Clock Security System enable"] - pub const fn hsecsson(&self) -> super::vals::Hsion { - let val = (self.0 >> 19usize) & 0x01; - super::vals::Hsion(val as u8) - } - #[doc = "HSE Clock Security System enable"] - pub fn set_hsecsson(&mut self, val: super::vals::Hsion) { - self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); - } - #[doc = "PLL1 enable"] - pub const fn pll1on(&self) -> super::vals::Hsion { - let val = (self.0 >> 24usize) & 0x01; - super::vals::Hsion(val as u8) - } - #[doc = "PLL1 enable"] - pub fn set_pll1on(&mut self, val: super::vals::Hsion) { - self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); - } - #[doc = "PLL1 clock ready flag"] - pub const fn pll1rdy(&self) -> bool { - let val = (self.0 >> 25usize) & 0x01; - val != 0 - } - #[doc = "PLL1 clock ready flag"] - pub fn set_pll1rdy(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize); - } - #[doc = "PLL2 enable"] - pub const fn pll2on(&self) -> super::vals::Hsion { - let val = (self.0 >> 26usize) & 0x01; - super::vals::Hsion(val as u8) - } - #[doc = "PLL2 enable"] - pub fn set_pll2on(&mut self, val: super::vals::Hsion) { - self.0 = (self.0 & !(0x01 << 26usize)) | (((val.0 as u32) & 0x01) << 26usize); - } - #[doc = "PLL2 clock ready flag"] - pub const fn pll2rdy(&self) -> bool { - let val = (self.0 >> 27usize) & 0x01; - val != 0 - } - #[doc = "PLL2 clock ready flag"] - pub fn set_pll2rdy(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize); - } - #[doc = "PLL3 enable"] - pub const fn pll3on(&self) -> super::vals::Hsion { - let val = (self.0 >> 28usize) & 0x01; - super::vals::Hsion(val as u8) - } - #[doc = "PLL3 enable"] - pub fn set_pll3on(&mut self, val: super::vals::Hsion) { - self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); - } - #[doc = "PLL3 clock ready flag"] - pub const fn pll3rdy(&self) -> bool { - let val = (self.0 >> 29usize) & 0x01; - val != 0 + pub struct Txdr(pub u32); + impl Txdr { + #[doc = "8-bit transmit data"] + pub const fn txdata(&self) -> u8 { + let val = (self.0 >> 0usize) & 0xff; + val as u8 } - #[doc = "PLL3 clock ready flag"] - pub fn set_pll3rdy(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 29usize)) | (((val as u32) & 0x01) << 29usize); + #[doc = "8-bit transmit data"] + pub fn set_txdata(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize); } } - impl Default for Cr { - fn default() -> Cr { - Cr(0) + impl Default for Txdr { + fn default() -> Txdr { + Txdr(0) } } - #[doc = "RCC Domain 3 Kernel Clock Configuration Register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct D3ccipr(pub u32); - impl D3ccipr { - #[doc = "LPUART1 kernel clock source selection"] - pub const fn lpuart1sel(&self) -> super::vals::Lpuart1sel { - let val = (self.0 >> 0usize) & 0x07; - super::vals::Lpuart1sel(val as u8) - } - #[doc = "LPUART1 kernel clock source selection"] - pub fn set_lpuart1sel(&mut self, val: super::vals::Lpuart1sel) { - self.0 = (self.0 & !(0x07 << 0usize)) | (((val.0 as u32) & 0x07) << 0usize); - } - #[doc = "I2C4 kernel clock source selection"] - pub const fn i2c4sel(&self) -> super::vals::I2c4sel { - let val = (self.0 >> 8usize) & 0x03; - super::vals::I2c4sel(val as u8) - } - #[doc = "I2C4 kernel clock source selection"] - pub fn set_i2c4sel(&mut self, val: super::vals::I2c4sel) { - self.0 = (self.0 & !(0x03 << 8usize)) | (((val.0 as u32) & 0x03) << 8usize); - } - #[doc = "LPTIM2 kernel clock source selection"] - pub const fn lptim2sel(&self) -> super::vals::Lptim2sel { - let val = (self.0 >> 10usize) & 0x07; - super::vals::Lptim2sel(val as u8) - } - #[doc = "LPTIM2 kernel clock source selection"] - pub fn set_lptim2sel(&mut self, val: super::vals::Lptim2sel) { - self.0 = (self.0 & !(0x07 << 10usize)) | (((val.0 as u32) & 0x07) << 10usize); - } - #[doc = "LPTIM3,4,5 kernel clock source selection"] - pub const fn lptim345sel(&self) -> super::vals::Lptim2sel { - let val = (self.0 >> 13usize) & 0x07; - super::vals::Lptim2sel(val as u8) - } - #[doc = "LPTIM3,4,5 kernel clock source selection"] - pub fn set_lptim345sel(&mut self, val: super::vals::Lptim2sel) { - self.0 = (self.0 & !(0x07 << 13usize)) | (((val.0 as u32) & 0x07) << 13usize); - } - #[doc = "SAR ADC kernel clock source selection"] - pub const fn adcsel(&self) -> super::vals::Adcsel { - let val = (self.0 >> 16usize) & 0x03; - super::vals::Adcsel(val as u8) - } - #[doc = "SAR ADC kernel clock source selection"] - pub fn set_adcsel(&mut self, val: super::vals::Adcsel) { - self.0 = (self.0 & !(0x03 << 16usize)) | (((val.0 as u32) & 0x03) << 16usize); - } - #[doc = "Sub-Block A of SAI4 kernel clock source selection"] - pub const fn sai4asel(&self) -> super::vals::Sai4asel { - let val = (self.0 >> 21usize) & 0x07; - super::vals::Sai4asel(val as u8) - } - #[doc = "Sub-Block A of SAI4 kernel clock source selection"] - pub fn set_sai4asel(&mut self, val: super::vals::Sai4asel) { - self.0 = (self.0 & !(0x07 << 21usize)) | (((val.0 as u32) & 0x07) << 21usize); - } - #[doc = "Sub-Block B of SAI4 kernel clock source selection"] - pub const fn sai4bsel(&self) -> super::vals::Sai4asel { - let val = (self.0 >> 24usize) & 0x07; - super::vals::Sai4asel(val as u8) - } - #[doc = "Sub-Block B of SAI4 kernel clock source selection"] - pub fn set_sai4bsel(&mut self, val: super::vals::Sai4asel) { - self.0 = (self.0 & !(0x07 << 24usize)) | (((val.0 as u32) & 0x07) << 24usize); - } - #[doc = "SPI6 kernel clock source selection"] - pub const fn spi6sel(&self) -> super::vals::Spi6sel { - let val = (self.0 >> 28usize) & 0x07; - super::vals::Spi6sel(val as u8) - } - #[doc = "SPI6 kernel clock source selection"] - pub fn set_spi6sel(&mut self, val: super::vals::Spi6sel) { - self.0 = (self.0 & !(0x07 << 28usize)) | (((val.0 as u32) & 0x07) << 28usize); - } + } +} +pub mod timer_v1 { + use crate::generic::*; + #[doc = "General purpose 32-bit timer"] + #[derive(Copy, Clone)] + pub struct TimGp32(pub *mut u8); + unsafe impl Send for TimGp32 {} + unsafe impl Sync for TimGp32 {} + impl TimGp32 { + #[doc = "control register 1"] + pub fn cr1(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(0usize)) } } - impl Default for D3ccipr { - fn default() -> D3ccipr { - D3ccipr(0) - } + #[doc = "control register 2"] + pub fn cr2(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(4usize)) } } - #[doc = "RCC AHB3 Reset Register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ahb3rstr(pub u32); - impl Ahb3rstr { - #[doc = "MDMA block reset"] - pub const fn mdmarst(&self) -> super::vals::Mdmarst { - let val = (self.0 >> 0usize) & 0x01; - super::vals::Mdmarst(val as u8) - } - #[doc = "MDMA block reset"] - pub fn set_mdmarst(&mut self, val: super::vals::Mdmarst) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); - } - #[doc = "DMA2D block reset"] - pub const fn dma2drst(&self) -> super::vals::Mdmarst { - let val = (self.0 >> 4usize) & 0x01; - super::vals::Mdmarst(val as u8) - } - #[doc = "DMA2D block reset"] - pub fn set_dma2drst(&mut self, val: super::vals::Mdmarst) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); - } - #[doc = "JPGDEC block reset"] - pub const fn jpgdecrst(&self) -> super::vals::Mdmarst { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Mdmarst(val as u8) - } - #[doc = "JPGDEC block reset"] - pub fn set_jpgdecrst(&mut self, val: super::vals::Mdmarst) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); - } - #[doc = "FMC block reset"] - pub const fn fmcrst(&self) -> super::vals::Mdmarst { - let val = (self.0 >> 12usize) & 0x01; - super::vals::Mdmarst(val as u8) - } - #[doc = "FMC block reset"] - pub fn set_fmcrst(&mut self, val: super::vals::Mdmarst) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); - } - #[doc = "QUADSPI and QUADSPI delay block reset"] - pub const fn qspirst(&self) -> super::vals::Mdmarst { - let val = (self.0 >> 14usize) & 0x01; - super::vals::Mdmarst(val as u8) - } - #[doc = "QUADSPI and QUADSPI delay block reset"] - pub fn set_qspirst(&mut self, val: super::vals::Mdmarst) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); - } - #[doc = "SDMMC1 and SDMMC1 delay block reset"] - pub const fn sdmmc1rst(&self) -> super::vals::Mdmarst { - let val = (self.0 >> 16usize) & 0x01; - super::vals::Mdmarst(val as u8) - } - #[doc = "SDMMC1 and SDMMC1 delay block reset"] - pub fn set_sdmmc1rst(&mut self, val: super::vals::Mdmarst) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); - } - #[doc = "CPU reset"] - pub const fn cpurst(&self) -> super::vals::Mdmarst { - let val = (self.0 >> 31usize) & 0x01; - super::vals::Mdmarst(val as u8) - } - #[doc = "CPU reset"] - pub fn set_cpurst(&mut self, val: super::vals::Mdmarst) { - self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); - } + #[doc = "slave mode control register"] + pub fn smcr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(8usize)) } } - impl Default for Ahb3rstr { - fn default() -> Ahb3rstr { - Ahb3rstr(0) - } + #[doc = "DMA/Interrupt enable register"] + pub fn dier(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(12usize)) } } - #[doc = "RCC PLL1 Fractional Divider Register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Pll1fracr(pub u32); - impl Pll1fracr { - #[doc = "Fractional part of the multiplication factor for PLL1 VCO"] - pub const fn fracn1(&self) -> u16 { - let val = (self.0 >> 3usize) & 0x1fff; - val as u16 - } - #[doc = "Fractional part of the multiplication factor for PLL1 VCO"] - pub fn set_fracn1(&mut self, val: u16) { - self.0 = (self.0 & !(0x1fff << 3usize)) | (((val as u32) & 0x1fff) << 3usize); - } + #[doc = "status register"] + pub fn sr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(16usize)) } } - impl Default for Pll1fracr { - fn default() -> Pll1fracr { - Pll1fracr(0) - } + #[doc = "event generation register"] + pub fn egr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(20usize)) } } - #[doc = "RCC Global Control Register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Gcr(pub u32); - impl Gcr { - #[doc = "WWDG1 reset scope control"] - pub const fn ww1rsc(&self) -> super::vals::Ww1rsc { - let val = (self.0 >> 0usize) & 0x01; - super::vals::Ww1rsc(val as u8) - } - #[doc = "WWDG1 reset scope control"] - pub fn set_ww1rsc(&mut self, val: super::vals::Ww1rsc) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); - } + #[doc = "capture/compare mode register 1 (input mode)"] + pub fn ccmr_input(self, n: usize) -> Reg { + assert!(n < 2usize); + unsafe { Reg::from_ptr(self.0.add(24usize + n * 4usize)) } } - impl Default for Gcr { - fn default() -> Gcr { - Gcr(0) - } + #[doc = "capture/compare mode register 1 (output mode)"] + pub fn ccmr_output(self, n: usize) -> Reg { + assert!(n < 2usize); + unsafe { Reg::from_ptr(self.0.add(24usize + n * 4usize)) } } - #[doc = "RCC AHB1 Sleep Clock Register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct C1Ahb1lpenr(pub u32); - impl C1Ahb1lpenr { - #[doc = "DMA1 Clock Enable During CSleep Mode"] - pub const fn dma1lpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen { - let val = (self.0 >> 0usize) & 0x01; - super::vals::C1Ahb1lpenrDma1lpen(val as u8) - } - #[doc = "DMA1 Clock Enable During CSleep Mode"] - pub fn set_dma1lpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); - } - #[doc = "DMA2 Clock Enable During CSleep Mode"] - pub const fn dma2lpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen { - let val = (self.0 >> 1usize) & 0x01; - super::vals::C1Ahb1lpenrDma1lpen(val as u8) - } - #[doc = "DMA2 Clock Enable During CSleep Mode"] - pub fn set_dma2lpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); - } - #[doc = "ADC1/2 Peripheral Clocks Enable During CSleep Mode"] - pub const fn adc12lpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen { - let val = (self.0 >> 5usize) & 0x01; - super::vals::C1Ahb1lpenrDma1lpen(val as u8) - } - #[doc = "ADC1/2 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_adc12lpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); - } - #[doc = "Ethernet MAC bus interface Clock Enable During CSleep Mode"] - pub const fn eth1maclpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen { - let val = (self.0 >> 15usize) & 0x01; - super::vals::C1Ahb1lpenrDma1lpen(val as u8) - } - #[doc = "Ethernet MAC bus interface Clock Enable During CSleep Mode"] - pub fn set_eth1maclpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); - } - #[doc = "Ethernet Transmission Clock Enable During CSleep Mode"] - pub const fn eth1txlpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen { - let val = (self.0 >> 16usize) & 0x01; - super::vals::C1Ahb1lpenrDma1lpen(val as u8) - } - #[doc = "Ethernet Transmission Clock Enable During CSleep Mode"] - pub fn set_eth1txlpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); - } - #[doc = "Ethernet Reception Clock Enable During CSleep Mode"] - pub const fn eth1rxlpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen { - let val = (self.0 >> 17usize) & 0x01; - super::vals::C1Ahb1lpenrDma1lpen(val as u8) - } - #[doc = "Ethernet Reception Clock Enable During CSleep Mode"] - pub fn set_eth1rxlpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); - } - #[doc = "USB1OTG peripheral clock enable during CSleep mode"] - pub const fn usb1otglpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen { - let val = (self.0 >> 25usize) & 0x01; - super::vals::C1Ahb1lpenrDma1lpen(val as u8) - } - #[doc = "USB1OTG peripheral clock enable during CSleep mode"] - pub fn set_usb1otglpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) { - self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize); - } - #[doc = "USB_PHY1 clock enable during CSleep mode"] - pub const fn usb1ulpilpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen { - let val = (self.0 >> 26usize) & 0x01; - super::vals::C1Ahb1lpenrDma1lpen(val as u8) - } - #[doc = "USB_PHY1 clock enable during CSleep mode"] - pub fn set_usb1ulpilpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) { - self.0 = (self.0 & !(0x01 << 26usize)) | (((val.0 as u32) & 0x01) << 26usize); - } - #[doc = "USB2OTG peripheral clock enable during CSleep mode"] - pub const fn usb2otglpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen { - let val = (self.0 >> 27usize) & 0x01; - super::vals::C1Ahb1lpenrDma1lpen(val as u8) - } - #[doc = "USB2OTG peripheral clock enable during CSleep mode"] - pub fn set_usb2otglpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) { - self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize); - } - #[doc = "USB_PHY2 clocks enable during CSleep mode"] - pub const fn usb2ulpilpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen { - let val = (self.0 >> 28usize) & 0x01; - super::vals::C1Ahb1lpenrDma1lpen(val as u8) - } - #[doc = "USB_PHY2 clocks enable during CSleep mode"] - pub fn set_usb2ulpilpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) { - self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); - } + #[doc = "capture/compare enable register"] + pub fn ccer(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(32usize)) } } - impl Default for C1Ahb1lpenr { - fn default() -> C1Ahb1lpenr { - C1Ahb1lpenr(0) - } + #[doc = "counter"] + pub fn cnt(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(36usize)) } } - #[doc = "RCC Internal Clock Source Calibration Register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Icscr(pub u32); - impl Icscr { - #[doc = "HSI clock calibration"] - pub const fn hsical(&self) -> u16 { - let val = (self.0 >> 0usize) & 0x0fff; - val as u16 - } - #[doc = "HSI clock calibration"] - pub fn set_hsical(&mut self, val: u16) { - self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize); - } - #[doc = "HSI clock trimming"] - pub const fn hsitrim(&self) -> u8 { - let val = (self.0 >> 12usize) & 0x3f; - val as u8 - } - #[doc = "HSI clock trimming"] - pub fn set_hsitrim(&mut self, val: u8) { - self.0 = (self.0 & !(0x3f << 12usize)) | (((val as u32) & 0x3f) << 12usize); - } - #[doc = "CSI clock calibration"] - pub const fn csical(&self) -> u8 { - let val = (self.0 >> 18usize) & 0xff; - val as u8 - } - #[doc = "CSI clock calibration"] - pub fn set_csical(&mut self, val: u8) { - self.0 = (self.0 & !(0xff << 18usize)) | (((val as u32) & 0xff) << 18usize); - } - #[doc = "CSI clock trimming"] - pub const fn csitrim(&self) -> u8 { - let val = (self.0 >> 26usize) & 0x1f; - val as u8 - } - #[doc = "CSI clock trimming"] - pub fn set_csitrim(&mut self, val: u8) { - self.0 = (self.0 & !(0x1f << 26usize)) | (((val as u32) & 0x1f) << 26usize); - } + #[doc = "prescaler"] + pub fn psc(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(40usize)) } } - impl Default for Icscr { - fn default() -> Icscr { - Icscr(0) - } + #[doc = "auto-reload register"] + pub fn arr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(44usize)) } } - #[doc = "RCC AHB2 Peripheral Reset Register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ahb2rstr(pub u32); - impl Ahb2rstr { - #[doc = "CAMITF block reset"] - pub const fn camitfrst(&self) -> super::vals::Camitfrst { - let val = (self.0 >> 0usize) & 0x01; - super::vals::Camitfrst(val as u8) - } - #[doc = "CAMITF block reset"] - pub fn set_camitfrst(&mut self, val: super::vals::Camitfrst) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); - } - #[doc = "Cryptography block reset"] - pub const fn cryptrst(&self) -> super::vals::Camitfrst { - let val = (self.0 >> 4usize) & 0x01; - super::vals::Camitfrst(val as u8) - } - #[doc = "Cryptography block reset"] - pub fn set_cryptrst(&mut self, val: super::vals::Camitfrst) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); - } - #[doc = "Hash block reset"] - pub const fn hashrst(&self) -> super::vals::Camitfrst { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Camitfrst(val as u8) - } - #[doc = "Hash block reset"] - pub fn set_hashrst(&mut self, val: super::vals::Camitfrst) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); - } - #[doc = "Random Number Generator block reset"] - pub const fn rngrst(&self) -> super::vals::Camitfrst { - let val = (self.0 >> 6usize) & 0x01; - super::vals::Camitfrst(val as u8) - } - #[doc = "Random Number Generator block reset"] - pub fn set_rngrst(&mut self, val: super::vals::Camitfrst) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); - } - #[doc = "SDMMC2 and SDMMC2 Delay block reset"] - pub const fn sdmmc2rst(&self) -> super::vals::Camitfrst { - let val = (self.0 >> 9usize) & 0x01; - super::vals::Camitfrst(val as u8) - } - #[doc = "SDMMC2 and SDMMC2 Delay block reset"] - pub fn set_sdmmc2rst(&mut self, val: super::vals::Camitfrst) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); - } + #[doc = "capture/compare register"] + pub fn ccr(self, n: usize) -> Reg { + assert!(n < 4usize); + unsafe { Reg::from_ptr(self.0.add(52usize + n * 4usize)) } } - impl Default for Ahb2rstr { - fn default() -> Ahb2rstr { - Ahb2rstr(0) - } + #[doc = "DMA control register"] + pub fn dcr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(72usize)) } } - #[doc = "RCC APB3 Clock Register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Apb3enr(pub u32); - impl Apb3enr { - #[doc = "LTDC peripheral clock enable"] - pub const fn ltdcen(&self) -> super::vals::Apb3enrLtdcen { - let val = (self.0 >> 3usize) & 0x01; - super::vals::Apb3enrLtdcen(val as u8) - } - #[doc = "LTDC peripheral clock enable"] - pub fn set_ltdcen(&mut self, val: super::vals::Apb3enrLtdcen) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); - } - #[doc = "WWDG1 Clock Enable"] - pub const fn wwdg1en(&self) -> super::vals::Apb3enrLtdcen { - let val = (self.0 >> 6usize) & 0x01; - super::vals::Apb3enrLtdcen(val as u8) - } - #[doc = "WWDG1 Clock Enable"] - pub fn set_wwdg1en(&mut self, val: super::vals::Apb3enrLtdcen) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); - } + #[doc = "DMA address for full transfer"] + pub fn dmar(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(76usize)) } } - impl Default for Apb3enr { - fn default() -> Apb3enr { - Apb3enr(0) - } + } + #[doc = "Advanced-timers"] + #[derive(Copy, Clone)] + pub struct TimAdv(pub *mut u8); + unsafe impl Send for TimAdv {} + unsafe impl Sync for TimAdv {} + impl TimAdv { + #[doc = "control register 1"] + pub fn cr1(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(0usize)) } } - #[doc = "RCC Domain 1 Clock Configuration Register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct D1cfgr(pub u32); - impl D1cfgr { - #[doc = "D1 domain AHB prescaler"] - pub const fn hpre(&self) -> super::vals::Hpre { - let val = (self.0 >> 0usize) & 0x0f; - super::vals::Hpre(val as u8) - } - #[doc = "D1 domain AHB prescaler"] - pub fn set_hpre(&mut self, val: super::vals::Hpre) { - self.0 = (self.0 & !(0x0f << 0usize)) | (((val.0 as u32) & 0x0f) << 0usize); - } - #[doc = "D1 domain APB3 prescaler"] - pub const fn d1ppre(&self) -> super::vals::D1ppre { - let val = (self.0 >> 4usize) & 0x07; - super::vals::D1ppre(val as u8) - } - #[doc = "D1 domain APB3 prescaler"] - pub fn set_d1ppre(&mut self, val: super::vals::D1ppre) { - self.0 = (self.0 & !(0x07 << 4usize)) | (((val.0 as u32) & 0x07) << 4usize); - } - #[doc = "D1 domain Core prescaler"] - pub const fn d1cpre(&self) -> super::vals::Hpre { - let val = (self.0 >> 8usize) & 0x0f; - super::vals::Hpre(val as u8) - } - #[doc = "D1 domain Core prescaler"] - pub fn set_d1cpre(&mut self, val: super::vals::Hpre) { - self.0 = (self.0 & !(0x0f << 8usize)) | (((val.0 as u32) & 0x0f) << 8usize); - } + #[doc = "control register 2"] + pub fn cr2(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(4usize)) } } - impl Default for D1cfgr { - fn default() -> D1cfgr { - D1cfgr(0) - } + #[doc = "slave mode control register"] + pub fn smcr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(8usize)) } } - #[doc = "RCC AHB2 Clock Register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ahb2enr(pub u32); - impl Ahb2enr { - #[doc = "DCMI peripheral clock"] - pub const fn dcmien(&self) -> super::vals::Ahb2enrDcmien { - let val = (self.0 >> 0usize) & 0x01; - super::vals::Ahb2enrDcmien(val as u8) - } - #[doc = "DCMI peripheral clock"] - pub fn set_dcmien(&mut self, val: super::vals::Ahb2enrDcmien) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); - } - #[doc = "CRYPT peripheral clock enable"] - pub const fn crypten(&self) -> super::vals::Ahb2enrDcmien { - let val = (self.0 >> 4usize) & 0x01; - super::vals::Ahb2enrDcmien(val as u8) - } - #[doc = "CRYPT peripheral clock enable"] - pub fn set_crypten(&mut self, val: super::vals::Ahb2enrDcmien) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); - } - #[doc = "HASH peripheral clock enable"] - pub const fn hashen(&self) -> super::vals::Ahb2enrDcmien { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Ahb2enrDcmien(val as u8) - } - #[doc = "HASH peripheral clock enable"] - pub fn set_hashen(&mut self, val: super::vals::Ahb2enrDcmien) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); - } - #[doc = "RNG peripheral clocks enable"] - pub const fn rngen(&self) -> super::vals::Ahb2enrDcmien { - let val = (self.0 >> 6usize) & 0x01; - super::vals::Ahb2enrDcmien(val as u8) - } - #[doc = "RNG peripheral clocks enable"] - pub fn set_rngen(&mut self, val: super::vals::Ahb2enrDcmien) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); - } - #[doc = "SDMMC2 and SDMMC2 delay clock enable"] - pub const fn sdmmc2en(&self) -> super::vals::Ahb2enrDcmien { - let val = (self.0 >> 9usize) & 0x01; - super::vals::Ahb2enrDcmien(val as u8) - } - #[doc = "SDMMC2 and SDMMC2 delay clock enable"] - pub fn set_sdmmc2en(&mut self, val: super::vals::Ahb2enrDcmien) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); - } - #[doc = "SRAM1 block enable"] - pub const fn sram1en(&self) -> super::vals::Ahb2enrDcmien { - let val = (self.0 >> 29usize) & 0x01; - super::vals::Ahb2enrDcmien(val as u8) - } - #[doc = "SRAM1 block enable"] - pub fn set_sram1en(&mut self, val: super::vals::Ahb2enrDcmien) { - self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); - } - #[doc = "SRAM2 block enable"] - pub const fn sram2en(&self) -> super::vals::Ahb2enrDcmien { - let val = (self.0 >> 30usize) & 0x01; - super::vals::Ahb2enrDcmien(val as u8) - } - #[doc = "SRAM2 block enable"] - pub fn set_sram2en(&mut self, val: super::vals::Ahb2enrDcmien) { - self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize); - } - #[doc = "SRAM3 block enable"] - pub const fn sram3en(&self) -> super::vals::Ahb2enrDcmien { - let val = (self.0 >> 31usize) & 0x01; - super::vals::Ahb2enrDcmien(val as u8) - } - #[doc = "SRAM3 block enable"] - pub fn set_sram3en(&mut self, val: super::vals::Ahb2enrDcmien) { - self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); - } + #[doc = "DMA/Interrupt enable register"] + pub fn dier(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(12usize)) } } - impl Default for Ahb2enr { - fn default() -> Ahb2enr { - Ahb2enr(0) - } + #[doc = "status register"] + pub fn sr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(16usize)) } } - #[doc = "RCC APB3 Sleep Clock Register"] + #[doc = "event generation register"] + pub fn egr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(20usize)) } + } + #[doc = "capture/compare mode register 1 (input mode)"] + pub fn ccmr_input(self, n: usize) -> Reg { + assert!(n < 2usize); + unsafe { Reg::from_ptr(self.0.add(24usize + n * 4usize)) } + } + #[doc = "capture/compare mode register 1 (output mode)"] + pub fn ccmr_output(self, n: usize) -> Reg { + assert!(n < 2usize); + unsafe { Reg::from_ptr(self.0.add(24usize + n * 4usize)) } + } + #[doc = "capture/compare enable register"] + pub fn ccer(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(32usize)) } + } + #[doc = "counter"] + pub fn cnt(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(36usize)) } + } + #[doc = "prescaler"] + pub fn psc(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(40usize)) } + } + #[doc = "auto-reload register"] + pub fn arr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(44usize)) } + } + #[doc = "repetition counter register"] + pub fn rcr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(48usize)) } + } + #[doc = "capture/compare register"] + pub fn ccr(self, n: usize) -> Reg { + assert!(n < 4usize); + unsafe { Reg::from_ptr(self.0.add(52usize + n * 4usize)) } + } + #[doc = "break and dead-time register"] + pub fn bdtr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(68usize)) } + } + #[doc = "DMA control register"] + pub fn dcr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(72usize)) } + } + #[doc = "DMA address for full transfer"] + pub fn dmar(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(76usize)) } + } + } + #[doc = "Basic timer"] + #[derive(Copy, Clone)] + pub struct TimBasic(pub *mut u8); + unsafe impl Send for TimBasic {} + unsafe impl Sync for TimBasic {} + impl TimBasic { + #[doc = "control register 1"] + pub fn cr1(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(0usize)) } + } + #[doc = "control register 2"] + pub fn cr2(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(4usize)) } + } + #[doc = "DMA/Interrupt enable register"] + pub fn dier(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(12usize)) } + } + #[doc = "status register"] + pub fn sr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(16usize)) } + } + #[doc = "event generation register"] + pub fn egr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(20usize)) } + } + #[doc = "counter"] + pub fn cnt(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(36usize)) } + } + #[doc = "prescaler"] + pub fn psc(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(40usize)) } + } + #[doc = "auto-reload register"] + pub fn arr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(44usize)) } + } + } + #[doc = "General purpose 16-bit timer"] + #[derive(Copy, Clone)] + pub struct TimGp16(pub *mut u8); + unsafe impl Send for TimGp16 {} + unsafe impl Sync for TimGp16 {} + impl TimGp16 { + #[doc = "control register 1"] + pub fn cr1(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(0usize)) } + } + #[doc = "control register 2"] + pub fn cr2(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(4usize)) } + } + #[doc = "slave mode control register"] + pub fn smcr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(8usize)) } + } + #[doc = "DMA/Interrupt enable register"] + pub fn dier(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(12usize)) } + } + #[doc = "status register"] + pub fn sr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(16usize)) } + } + #[doc = "event generation register"] + pub fn egr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(20usize)) } + } + #[doc = "capture/compare mode register 1 (input mode)"] + pub fn ccmr_input(self, n: usize) -> Reg { + assert!(n < 2usize); + unsafe { Reg::from_ptr(self.0.add(24usize + n * 4usize)) } + } + #[doc = "capture/compare mode register 1 (output mode)"] + pub fn ccmr_output(self, n: usize) -> Reg { + assert!(n < 2usize); + unsafe { Reg::from_ptr(self.0.add(24usize + n * 4usize)) } + } + #[doc = "capture/compare enable register"] + pub fn ccer(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(32usize)) } + } + #[doc = "counter"] + pub fn cnt(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(36usize)) } + } + #[doc = "prescaler"] + pub fn psc(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(40usize)) } + } + #[doc = "auto-reload register"] + pub fn arr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(44usize)) } + } + #[doc = "capture/compare register"] + pub fn ccr(self, n: usize) -> Reg { + assert!(n < 4usize); + unsafe { Reg::from_ptr(self.0.add(52usize + n * 4usize)) } + } + #[doc = "DMA control register"] + pub fn dcr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(72usize)) } + } + #[doc = "DMA address for full transfer"] + pub fn dmar(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(76usize)) } + } + } + pub mod regs { + use crate::generic::*; + #[doc = "repetition counter register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct C1Apb3lpenr(pub u32); - impl C1Apb3lpenr { - #[doc = "LTDC peripheral clock enable during CSleep mode"] - pub const fn ltdclpen(&self) -> super::vals::C1Apb3lpenrLtdclpen { - let val = (self.0 >> 3usize) & 0x01; - super::vals::C1Apb3lpenrLtdclpen(val as u8) - } - #[doc = "LTDC peripheral clock enable during CSleep mode"] - pub fn set_ltdclpen(&mut self, val: super::vals::C1Apb3lpenrLtdclpen) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); - } - #[doc = "WWDG1 Clock Enable During CSleep Mode"] - pub const fn wwdg1lpen(&self) -> super::vals::C1Apb3lpenrLtdclpen { - let val = (self.0 >> 6usize) & 0x01; - super::vals::C1Apb3lpenrLtdclpen(val as u8) + pub struct Rcr(pub u32); + impl Rcr { + #[doc = "Repetition counter value"] + pub const fn rep(&self) -> u8 { + let val = (self.0 >> 0usize) & 0xff; + val as u8 } - #[doc = "WWDG1 Clock Enable During CSleep Mode"] - pub fn set_wwdg1lpen(&mut self, val: super::vals::C1Apb3lpenrLtdclpen) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); + #[doc = "Repetition counter value"] + pub fn set_rep(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize); } } - impl Default for C1Apb3lpenr { - fn default() -> C1Apb3lpenr { - C1Apb3lpenr(0) + impl Default for Rcr { + fn default() -> Rcr { + Rcr(0) } } - #[doc = "RCC AHB2 Sleep Clock Register"] + #[doc = "capture/compare enable register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct C1Ahb2lpenr(pub u32); - impl C1Ahb2lpenr { - #[doc = "DCMI peripheral clock enable during csleep mode"] - pub const fn dcmilpen(&self) -> super::vals::C1Ahb2lpenrDcmilpen { - let val = (self.0 >> 0usize) & 0x01; - super::vals::C1Ahb2lpenrDcmilpen(val as u8) - } - #[doc = "DCMI peripheral clock enable during csleep mode"] - pub fn set_dcmilpen(&mut self, val: super::vals::C1Ahb2lpenrDcmilpen) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); - } - #[doc = "CRYPT peripheral clock enable during CSleep mode"] - pub const fn cryptlpen(&self) -> super::vals::C1Ahb2lpenrDcmilpen { - let val = (self.0 >> 4usize) & 0x01; - super::vals::C1Ahb2lpenrDcmilpen(val as u8) + pub struct CcerAdv(pub u32); + impl CcerAdv { + #[doc = "Capture/Compare 1 output enable"] + pub fn cce(&self, n: usize) -> bool { + assert!(n < 4usize); + let offs = 0usize + n * 4usize; + let val = (self.0 >> offs) & 0x01; + val != 0 } - #[doc = "CRYPT peripheral clock enable during CSleep mode"] - pub fn set_cryptlpen(&mut self, val: super::vals::C1Ahb2lpenrDcmilpen) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + #[doc = "Capture/Compare 1 output enable"] + pub fn set_cce(&mut self, n: usize, val: bool) { + assert!(n < 4usize); + let offs = 0usize + n * 4usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "HASH peripheral clock enable during CSleep mode"] - pub const fn hashlpen(&self) -> super::vals::C1Ahb2lpenrDcmilpen { - let val = (self.0 >> 5usize) & 0x01; - super::vals::C1Ahb2lpenrDcmilpen(val as u8) + #[doc = "Capture/Compare 1 output Polarity"] + pub fn ccp(&self, n: usize) -> bool { + assert!(n < 4usize); + let offs = 1usize + n * 4usize; + let val = (self.0 >> offs) & 0x01; + val != 0 } - #[doc = "HASH peripheral clock enable during CSleep mode"] - pub fn set_hashlpen(&mut self, val: super::vals::C1Ahb2lpenrDcmilpen) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + #[doc = "Capture/Compare 1 output Polarity"] + pub fn set_ccp(&mut self, n: usize, val: bool) { + assert!(n < 4usize); + let offs = 1usize + n * 4usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "RNG peripheral clock enable during CSleep mode"] - pub const fn rnglpen(&self) -> super::vals::C1Ahb2lpenrDcmilpen { - let val = (self.0 >> 6usize) & 0x01; - super::vals::C1Ahb2lpenrDcmilpen(val as u8) + #[doc = "Capture/Compare 1 complementary output enable"] + pub fn ccne(&self, n: usize) -> bool { + assert!(n < 4usize); + let offs = 2usize + n * 4usize; + let val = (self.0 >> offs) & 0x01; + val != 0 } - #[doc = "RNG peripheral clock enable during CSleep mode"] - pub fn set_rnglpen(&mut self, val: super::vals::C1Ahb2lpenrDcmilpen) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); + #[doc = "Capture/Compare 1 complementary output enable"] + pub fn set_ccne(&mut self, n: usize, val: bool) { + assert!(n < 4usize); + let offs = 2usize + n * 4usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "SDMMC2 and SDMMC2 Delay Clock Enable During CSleep Mode"] - pub const fn sdmmc2lpen(&self) -> super::vals::C1Ahb2lpenrDcmilpen { - let val = (self.0 >> 9usize) & 0x01; - super::vals::C1Ahb2lpenrDcmilpen(val as u8) + #[doc = "Capture/Compare 1 output Polarity"] + pub fn ccnp(&self, n: usize) -> bool { + assert!(n < 4usize); + let offs = 3usize + n * 4usize; + let val = (self.0 >> offs) & 0x01; + val != 0 } - #[doc = "SDMMC2 and SDMMC2 Delay Clock Enable During CSleep Mode"] - pub fn set_sdmmc2lpen(&mut self, val: super::vals::C1Ahb2lpenrDcmilpen) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + #[doc = "Capture/Compare 1 output Polarity"] + pub fn set_ccnp(&mut self, n: usize, val: bool) { + assert!(n < 4usize); + let offs = 3usize + n * 4usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "SRAM1 Clock Enable During CSleep Mode"] - pub const fn sram1lpen(&self) -> super::vals::C1Ahb2lpenrDcmilpen { - let val = (self.0 >> 29usize) & 0x01; - super::vals::C1Ahb2lpenrDcmilpen(val as u8) + } + impl Default for CcerAdv { + fn default() -> CcerAdv { + CcerAdv(0) } - #[doc = "SRAM1 Clock Enable During CSleep Mode"] - pub fn set_sram1lpen(&mut self, val: super::vals::C1Ahb2lpenrDcmilpen) { - self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); + } + #[doc = "status register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct SrBasic(pub u32); + impl SrBasic { + #[doc = "Update interrupt flag"] + pub const fn uif(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 } - #[doc = "SRAM2 Clock Enable During CSleep Mode"] - pub const fn sram2lpen(&self) -> super::vals::C1Ahb2lpenrDcmilpen { - let val = (self.0 >> 30usize) & 0x01; - super::vals::C1Ahb2lpenrDcmilpen(val as u8) + #[doc = "Update interrupt flag"] + pub fn set_uif(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "SRAM2 Clock Enable During CSleep Mode"] - pub fn set_sram2lpen(&mut self, val: super::vals::C1Ahb2lpenrDcmilpen) { - self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize); + } + impl Default for SrBasic { + fn default() -> SrBasic { + SrBasic(0) } - #[doc = "SRAM3 Clock Enable During CSleep Mode"] - pub const fn sram3lpen(&self) -> super::vals::C1Ahb2lpenrDcmilpen { - let val = (self.0 >> 31usize) & 0x01; - super::vals::C1Ahb2lpenrDcmilpen(val as u8) + } + #[doc = "DMA address for full transfer"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Dmar(pub u32); + impl Dmar { + #[doc = "DMA register for burst accesses"] + pub const fn dmab(&self) -> u16 { + let val = (self.0 >> 0usize) & 0xffff; + val as u16 } - #[doc = "SRAM3 Clock Enable During CSleep Mode"] - pub fn set_sram3lpen(&mut self, val: super::vals::C1Ahb2lpenrDcmilpen) { - self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); + #[doc = "DMA register for burst accesses"] + pub fn set_dmab(&mut self, val: u16) { + self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); } } - impl Default for C1Ahb2lpenr { - fn default() -> C1Ahb2lpenr { - C1Ahb2lpenr(0) + impl Default for Dmar { + fn default() -> Dmar { + Dmar(0) } } - #[doc = "RCC PLLs Clock Source Selection Register"] + #[doc = "counter"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Pllckselr(pub u32); - impl Pllckselr { - #[doc = "DIVMx and PLLs clock source selection"] - pub const fn pllsrc(&self) -> super::vals::Pllsrc { - let val = (self.0 >> 0usize) & 0x03; - super::vals::Pllsrc(val as u8) - } - #[doc = "DIVMx and PLLs clock source selection"] - pub fn set_pllsrc(&mut self, val: super::vals::Pllsrc) { - self.0 = (self.0 & !(0x03 << 0usize)) | (((val.0 as u32) & 0x03) << 0usize); - } - #[doc = "Prescaler for PLL1"] - pub fn divm(&self, n: usize) -> u8 { - assert!(n < 3usize); - let offs = 4usize + n * 8usize; - let val = (self.0 >> offs) & 0x3f; - val as u8 + pub struct Cnt16(pub u32); + impl Cnt16 { + #[doc = "counter value"] + pub const fn cnt(&self) -> u16 { + let val = (self.0 >> 0usize) & 0xffff; + val as u16 } - #[doc = "Prescaler for PLL1"] - pub fn set_divm(&mut self, n: usize, val: u8) { - assert!(n < 3usize); - let offs = 4usize + n * 8usize; - self.0 = (self.0 & !(0x3f << offs)) | (((val as u32) & 0x3f) << offs); + #[doc = "counter value"] + pub fn set_cnt(&mut self, val: u16) { + self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); } } - impl Default for Pllckselr { - fn default() -> Pllckselr { - Pllckselr(0) + impl Default for Cnt16 { + fn default() -> Cnt16 { + Cnt16(0) } } - #[doc = "RCC AHB3 Sleep Clock Register"] + #[doc = "DMA/Interrupt enable register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct C1Ahb3lpenr(pub u32); - impl C1Ahb3lpenr { - #[doc = "MDMA Clock Enable During CSleep Mode"] - pub const fn mdmalpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen { + pub struct DierAdv(pub u32); + impl DierAdv { + #[doc = "Update interrupt enable"] + pub const fn uie(&self) -> bool { let val = (self.0 >> 0usize) & 0x01; - super::vals::C1Ahb3lpenrMdmalpen(val as u8) + val != 0 } - #[doc = "MDMA Clock Enable During CSleep Mode"] - pub fn set_mdmalpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + #[doc = "Update interrupt enable"] + pub fn set_uie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "DMA2D Clock Enable During CSleep Mode"] - pub const fn dma2dlpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen { - let val = (self.0 >> 4usize) & 0x01; - super::vals::C1Ahb3lpenrMdmalpen(val as u8) + #[doc = "Capture/Compare 1 interrupt enable"] + pub fn ccie(&self, n: usize) -> bool { + assert!(n < 4usize); + let offs = 1usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; + val != 0 } - #[doc = "DMA2D Clock Enable During CSleep Mode"] - pub fn set_dma2dlpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + #[doc = "Capture/Compare 1 interrupt enable"] + pub fn set_ccie(&mut self, n: usize, val: bool) { + assert!(n < 4usize); + let offs = 1usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "JPGDEC Clock Enable During CSleep Mode"] - pub const fn jpgdeclpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen { + #[doc = "COM interrupt enable"] + pub const fn comie(&self) -> bool { let val = (self.0 >> 5usize) & 0x01; - super::vals::C1Ahb3lpenrMdmalpen(val as u8) + val != 0 } - #[doc = "JPGDEC Clock Enable During CSleep Mode"] - pub fn set_jpgdeclpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + #[doc = "COM interrupt enable"] + pub fn set_comie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); } - #[doc = "Flash interface clock enable during csleep mode"] - pub const fn flashpren(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; + #[doc = "Trigger interrupt enable"] + pub const fn tie(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; val != 0 } - #[doc = "Flash interface clock enable during csleep mode"] - pub fn set_flashpren(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); - } - #[doc = "FMC Peripheral Clocks Enable During CSleep Mode"] - pub const fn fmclpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen { - let val = (self.0 >> 12usize) & 0x01; - super::vals::C1Ahb3lpenrMdmalpen(val as u8) + #[doc = "Trigger interrupt enable"] + pub fn set_tie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - #[doc = "FMC Peripheral Clocks Enable During CSleep Mode"] - pub fn set_fmclpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); + #[doc = "Break interrupt enable"] + pub const fn bie(&self) -> bool { + let val = (self.0 >> 7usize) & 0x01; + val != 0 } - #[doc = "QUADSPI and QUADSPI Delay Clock Enable During CSleep Mode"] - pub const fn qspilpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen { - let val = (self.0 >> 14usize) & 0x01; - super::vals::C1Ahb3lpenrMdmalpen(val as u8) - } - #[doc = "QUADSPI and QUADSPI Delay Clock Enable During CSleep Mode"] - pub fn set_qspilpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); - } - #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable During CSleep Mode"] - pub const fn sdmmc1lpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen { - let val = (self.0 >> 16usize) & 0x01; - super::vals::C1Ahb3lpenrMdmalpen(val as u8) - } - #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable During CSleep Mode"] - pub fn set_sdmmc1lpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + #[doc = "Break interrupt enable"] + pub fn set_bie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); } - #[doc = "D1DTCM1 Block Clock Enable During CSleep mode"] - pub const fn d1dtcm1lpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen { - let val = (self.0 >> 28usize) & 0x01; - super::vals::C1Ahb3lpenrMdmalpen(val as u8) + #[doc = "Update DMA request enable"] + pub const fn ude(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 } - #[doc = "D1DTCM1 Block Clock Enable During CSleep mode"] - pub fn set_d1dtcm1lpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) { - self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); + #[doc = "Update DMA request enable"] + pub fn set_ude(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); } - #[doc = "D1 DTCM2 Block Clock Enable During CSleep mode"] - pub const fn dtcm2lpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen { - let val = (self.0 >> 29usize) & 0x01; - super::vals::C1Ahb3lpenrMdmalpen(val as u8) + #[doc = "Capture/Compare 1 DMA request enable"] + pub fn ccde(&self, n: usize) -> bool { + assert!(n < 4usize); + let offs = 9usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; + val != 0 } - #[doc = "D1 DTCM2 Block Clock Enable During CSleep mode"] - pub fn set_dtcm2lpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) { - self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); + #[doc = "Capture/Compare 1 DMA request enable"] + pub fn set_ccde(&mut self, n: usize, val: bool) { + assert!(n < 4usize); + let offs = 9usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "D1ITCM Block Clock Enable During CSleep mode"] - pub const fn itcmlpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen { - let val = (self.0 >> 30usize) & 0x01; - super::vals::C1Ahb3lpenrMdmalpen(val as u8) + #[doc = "COM DMA request enable"] + pub const fn comde(&self) -> bool { + let val = (self.0 >> 13usize) & 0x01; + val != 0 } - #[doc = "D1ITCM Block Clock Enable During CSleep mode"] - pub fn set_itcmlpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) { - self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize); + #[doc = "COM DMA request enable"] + pub fn set_comde(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); } - #[doc = "AXISRAM Block Clock Enable During CSleep mode"] - pub const fn axisramlpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen { - let val = (self.0 >> 31usize) & 0x01; - super::vals::C1Ahb3lpenrMdmalpen(val as u8) + #[doc = "Trigger DMA request enable"] + pub const fn tde(&self) -> bool { + let val = (self.0 >> 14usize) & 0x01; + val != 0 } - #[doc = "AXISRAM Block Clock Enable During CSleep mode"] - pub fn set_axisramlpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) { - self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); + #[doc = "Trigger DMA request enable"] + pub fn set_tde(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); } } - impl Default for C1Ahb3lpenr { - fn default() -> C1Ahb3lpenr { - C1Ahb3lpenr(0) + impl Default for DierAdv { + fn default() -> DierAdv { + DierAdv(0) } } - #[doc = "RCC AHB1 Clock Register"] + #[doc = "control register 1"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ahb1enr(pub u32); - impl Ahb1enr { - #[doc = "DMA1 Clock Enable"] - pub const fn dma1en(&self) -> super::vals::Ahb1enrDma1en { + pub struct Cr1Basic(pub u32); + impl Cr1Basic { + #[doc = "Counter enable"] + pub const fn cen(&self) -> bool { let val = (self.0 >> 0usize) & 0x01; - super::vals::Ahb1enrDma1en(val as u8) + val != 0 } - #[doc = "DMA1 Clock Enable"] - pub fn set_dma1en(&mut self, val: super::vals::Ahb1enrDma1en) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + #[doc = "Counter enable"] + pub fn set_cen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "DMA2 Clock Enable"] - pub const fn dma2en(&self) -> super::vals::Ahb1enrDma1en { + #[doc = "Update disable"] + pub const fn udis(&self) -> bool { let val = (self.0 >> 1usize) & 0x01; - super::vals::Ahb1enrDma1en(val as u8) + val != 0 } - #[doc = "DMA2 Clock Enable"] - pub fn set_dma2en(&mut self, val: super::vals::Ahb1enrDma1en) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + #[doc = "Update disable"] + pub fn set_udis(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - #[doc = "ADC1/2 Peripheral Clocks Enable"] - pub const fn adc12en(&self) -> super::vals::Ahb1enrDma1en { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Ahb1enrDma1en(val as u8) + #[doc = "Update request source"] + pub const fn urs(&self) -> super::vals::Urs { + let val = (self.0 >> 2usize) & 0x01; + super::vals::Urs(val as u8) } - #[doc = "ADC1/2 Peripheral Clocks Enable"] - pub fn set_adc12en(&mut self, val: super::vals::Ahb1enrDma1en) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + #[doc = "Update request source"] + pub fn set_urs(&mut self, val: super::vals::Urs) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); } - #[doc = "Ethernet MAC bus interface Clock Enable"] - pub const fn eth1macen(&self) -> super::vals::Ahb1enrDma1en { - let val = (self.0 >> 15usize) & 0x01; - super::vals::Ahb1enrDma1en(val as u8) + #[doc = "One-pulse mode"] + pub const fn opm(&self) -> super::vals::Opm { + let val = (self.0 >> 3usize) & 0x01; + super::vals::Opm(val as u8) } - #[doc = "Ethernet MAC bus interface Clock Enable"] - pub fn set_eth1macen(&mut self, val: super::vals::Ahb1enrDma1en) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + #[doc = "One-pulse mode"] + pub fn set_opm(&mut self, val: super::vals::Opm) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); } - #[doc = "Ethernet Transmission Clock Enable"] - pub const fn eth1txen(&self) -> super::vals::Ahb1enrDma1en { - let val = (self.0 >> 16usize) & 0x01; - super::vals::Ahb1enrDma1en(val as u8) + #[doc = "Auto-reload preload enable"] + pub const fn arpe(&self) -> super::vals::Arpe { + let val = (self.0 >> 7usize) & 0x01; + super::vals::Arpe(val as u8) } - #[doc = "Ethernet Transmission Clock Enable"] - pub fn set_eth1txen(&mut self, val: super::vals::Ahb1enrDma1en) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + #[doc = "Auto-reload preload enable"] + pub fn set_arpe(&mut self, val: super::vals::Arpe) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); } - #[doc = "Ethernet Reception Clock Enable"] - pub const fn eth1rxen(&self) -> super::vals::Ahb1enrDma1en { - let val = (self.0 >> 17usize) & 0x01; - super::vals::Ahb1enrDma1en(val as u8) + } + impl Default for Cr1Basic { + fn default() -> Cr1Basic { + Cr1Basic(0) } - #[doc = "Ethernet Reception Clock Enable"] - pub fn set_eth1rxen(&mut self, val: super::vals::Ahb1enrDma1en) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); + } + #[doc = "status register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct SrGp(pub u32); + impl SrGp { + #[doc = "Update interrupt flag"] + pub const fn uif(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 } - #[doc = "Enable USB_PHY2 clocks"] - pub const fn usb2otghsulpien(&self) -> super::vals::Ahb1enrDma1en { - let val = (self.0 >> 18usize) & 0x01; - super::vals::Ahb1enrDma1en(val as u8) + #[doc = "Update interrupt flag"] + pub fn set_uif(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "Enable USB_PHY2 clocks"] - pub fn set_usb2otghsulpien(&mut self, val: super::vals::Ahb1enrDma1en) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); + #[doc = "Capture/compare 1 interrupt flag"] + pub fn ccif(&self, n: usize) -> bool { + assert!(n < 4usize); + let offs = 1usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; + val != 0 } - #[doc = "USB1OTG Peripheral Clocks Enable"] - pub const fn usb1otgen(&self) -> super::vals::Ahb1enrDma1en { - let val = (self.0 >> 25usize) & 0x01; - super::vals::Ahb1enrDma1en(val as u8) + #[doc = "Capture/compare 1 interrupt flag"] + pub fn set_ccif(&mut self, n: usize, val: bool) { + assert!(n < 4usize); + let offs = 1usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "USB1OTG Peripheral Clocks Enable"] - pub fn set_usb1otgen(&mut self, val: super::vals::Ahb1enrDma1en) { - self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize); + #[doc = "COM interrupt flag"] + pub const fn comif(&self) -> bool { + let val = (self.0 >> 5usize) & 0x01; + val != 0 } - #[doc = "USB_PHY1 Clocks Enable"] - pub const fn usb1ulpien(&self) -> super::vals::Ahb1enrDma1en { - let val = (self.0 >> 26usize) & 0x01; - super::vals::Ahb1enrDma1en(val as u8) + #[doc = "COM interrupt flag"] + pub fn set_comif(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); } - #[doc = "USB_PHY1 Clocks Enable"] - pub fn set_usb1ulpien(&mut self, val: super::vals::Ahb1enrDma1en) { - self.0 = (self.0 & !(0x01 << 26usize)) | (((val.0 as u32) & 0x01) << 26usize); + #[doc = "Trigger interrupt flag"] + pub const fn tif(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 } - #[doc = "USB2OTG Peripheral Clocks Enable"] - pub const fn usb2otgen(&self) -> super::vals::Ahb1enrDma1en { - let val = (self.0 >> 27usize) & 0x01; - super::vals::Ahb1enrDma1en(val as u8) + #[doc = "Trigger interrupt flag"] + pub fn set_tif(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - #[doc = "USB2OTG Peripheral Clocks Enable"] - pub fn set_usb2otgen(&mut self, val: super::vals::Ahb1enrDma1en) { - self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize); + #[doc = "Break interrupt flag"] + pub const fn bif(&self) -> bool { + let val = (self.0 >> 7usize) & 0x01; + val != 0 } - #[doc = "USB_PHY2 Clocks Enable"] - pub const fn usb2ulpien(&self) -> super::vals::Ahb1enrDma1en { - let val = (self.0 >> 28usize) & 0x01; - super::vals::Ahb1enrDma1en(val as u8) + #[doc = "Break interrupt flag"] + pub fn set_bif(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); } - #[doc = "USB_PHY2 Clocks Enable"] - pub fn set_usb2ulpien(&mut self, val: super::vals::Ahb1enrDma1en) { - self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); + #[doc = "Capture/Compare 1 overcapture flag"] + pub fn ccof(&self, n: usize) -> bool { + assert!(n < 4usize); + let offs = 9usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; + val != 0 } - } - impl Default for Ahb1enr { - fn default() -> Ahb1enr { - Ahb1enr(0) + #[doc = "Capture/Compare 1 overcapture flag"] + pub fn set_ccof(&mut self, n: usize, val: bool) { + assert!(n < 4usize); + let offs = 9usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } } - #[doc = "RCC AHB1 Peripheral Reset Register"] + impl Default for SrGp { + fn default() -> SrGp { + SrGp(0) + } + } + #[doc = "control register 2"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ahb1rstr(pub u32); - impl Ahb1rstr { - #[doc = "DMA1 block reset"] - pub const fn dma1rst(&self) -> super::vals::Dma1rst { + pub struct Cr2Adv(pub u32); + impl Cr2Adv { + #[doc = "Capture/compare preloaded control"] + pub const fn ccpc(&self) -> bool { let val = (self.0 >> 0usize) & 0x01; - super::vals::Dma1rst(val as u8) + val != 0 } - #[doc = "DMA1 block reset"] - pub fn set_dma1rst(&mut self, val: super::vals::Dma1rst) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + #[doc = "Capture/compare preloaded control"] + pub fn set_ccpc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "DMA2 block reset"] - pub const fn dma2rst(&self) -> super::vals::Dma1rst { - let val = (self.0 >> 1usize) & 0x01; - super::vals::Dma1rst(val as u8) + #[doc = "Capture/compare control update selection"] + pub const fn ccus(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; + val != 0 } - #[doc = "DMA2 block reset"] - pub fn set_dma2rst(&mut self, val: super::vals::Dma1rst) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + #[doc = "Capture/compare control update selection"] + pub fn set_ccus(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); } - #[doc = "ADC1&2 block reset"] - pub const fn adc12rst(&self) -> super::vals::Dma1rst { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Dma1rst(val as u8) + #[doc = "Capture/compare DMA selection"] + pub const fn ccds(&self) -> super::vals::Ccds { + let val = (self.0 >> 3usize) & 0x01; + super::vals::Ccds(val as u8) } - #[doc = "ADC1&2 block reset"] - pub fn set_adc12rst(&mut self, val: super::vals::Dma1rst) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + #[doc = "Capture/compare DMA selection"] + pub fn set_ccds(&mut self, val: super::vals::Ccds) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); } - #[doc = "ETH1MAC block reset"] - pub const fn eth1macrst(&self) -> super::vals::Dma1rst { - let val = (self.0 >> 15usize) & 0x01; - super::vals::Dma1rst(val as u8) + #[doc = "Master mode selection"] + pub const fn mms(&self) -> super::vals::Mms { + let val = (self.0 >> 4usize) & 0x07; + super::vals::Mms(val as u8) } - #[doc = "ETH1MAC block reset"] - pub fn set_eth1macrst(&mut self, val: super::vals::Dma1rst) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + #[doc = "Master mode selection"] + pub fn set_mms(&mut self, val: super::vals::Mms) { + self.0 = (self.0 & !(0x07 << 4usize)) | (((val.0 as u32) & 0x07) << 4usize); } - #[doc = "USB1OTG block reset"] - pub const fn usb1otgrst(&self) -> super::vals::Dma1rst { - let val = (self.0 >> 25usize) & 0x01; - super::vals::Dma1rst(val as u8) + #[doc = "TI1 selection"] + pub const fn ti1s(&self) -> super::vals::Tis { + let val = (self.0 >> 7usize) & 0x01; + super::vals::Tis(val as u8) } - #[doc = "USB1OTG block reset"] - pub fn set_usb1otgrst(&mut self, val: super::vals::Dma1rst) { - self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize); + #[doc = "TI1 selection"] + pub fn set_ti1s(&mut self, val: super::vals::Tis) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); } - #[doc = "USB2OTG block reset"] - pub const fn usb2otgrst(&self) -> super::vals::Dma1rst { - let val = (self.0 >> 27usize) & 0x01; - super::vals::Dma1rst(val as u8) + #[doc = "Output Idle state 1"] + pub fn ois(&self, n: usize) -> bool { + assert!(n < 4usize); + let offs = 8usize + n * 2usize; + let val = (self.0 >> offs) & 0x01; + val != 0 } - #[doc = "USB2OTG block reset"] - pub fn set_usb2otgrst(&mut self, val: super::vals::Dma1rst) { - self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize); + #[doc = "Output Idle state 1"] + pub fn set_ois(&mut self, n: usize, val: bool) { + assert!(n < 4usize); + let offs = 8usize + n * 2usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + } + #[doc = "Output Idle state 1"] + pub const fn ois1n(&self) -> bool { + let val = (self.0 >> 9usize) & 0x01; + val != 0 + } + #[doc = "Output Idle state 1"] + pub fn set_ois1n(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + } + #[doc = "Output Idle state 2"] + pub const fn ois2n(&self) -> bool { + let val = (self.0 >> 11usize) & 0x01; + val != 0 + } + #[doc = "Output Idle state 2"] + pub fn set_ois2n(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); + } + #[doc = "Output Idle state 3"] + pub const fn ois3n(&self) -> bool { + let val = (self.0 >> 13usize) & 0x01; + val != 0 + } + #[doc = "Output Idle state 3"] + pub fn set_ois3n(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); } } - impl Default for Ahb1rstr { - fn default() -> Ahb1rstr { - Ahb1rstr(0) + impl Default for Cr2Adv { + fn default() -> Cr2Adv { + Cr2Adv(0) } } - #[doc = "RCC APB1 Clock Register"] + #[doc = "prescaler"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Apb1lenr(pub u32); - impl Apb1lenr { - #[doc = "TIM peripheral clock enable"] - pub const fn tim2en(&self) -> super::vals::Apb1lenrTim2en { + pub struct Psc(pub u32); + impl Psc { + #[doc = "Prescaler value"] + pub const fn psc(&self) -> u16 { + let val = (self.0 >> 0usize) & 0xffff; + val as u16 + } + #[doc = "Prescaler value"] + pub fn set_psc(&mut self, val: u16) { + self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); + } + } + impl Default for Psc { + fn default() -> Psc { + Psc(0) + } + } + #[doc = "control register 2"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Cr2Gp(pub u32); + impl Cr2Gp { + #[doc = "Capture/compare DMA selection"] + pub const fn ccds(&self) -> super::vals::Ccds { + let val = (self.0 >> 3usize) & 0x01; + super::vals::Ccds(val as u8) + } + #[doc = "Capture/compare DMA selection"] + pub fn set_ccds(&mut self, val: super::vals::Ccds) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); + } + #[doc = "Master mode selection"] + pub const fn mms(&self) -> super::vals::Mms { + let val = (self.0 >> 4usize) & 0x07; + super::vals::Mms(val as u8) + } + #[doc = "Master mode selection"] + pub fn set_mms(&mut self, val: super::vals::Mms) { + self.0 = (self.0 & !(0x07 << 4usize)) | (((val.0 as u32) & 0x07) << 4usize); + } + #[doc = "TI1 selection"] + pub const fn ti1s(&self) -> super::vals::Tis { + let val = (self.0 >> 7usize) & 0x01; + super::vals::Tis(val as u8) + } + #[doc = "TI1 selection"] + pub fn set_ti1s(&mut self, val: super::vals::Tis) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); + } + } + impl Default for Cr2Gp { + fn default() -> Cr2Gp { + Cr2Gp(0) + } + } + #[doc = "control register 1"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Cr1Gp(pub u32); + impl Cr1Gp { + #[doc = "Counter enable"] + pub const fn cen(&self) -> bool { let val = (self.0 >> 0usize) & 0x01; - super::vals::Apb1lenrTim2en(val as u8) + val != 0 } - #[doc = "TIM peripheral clock enable"] - pub fn set_tim2en(&mut self, val: super::vals::Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + #[doc = "Counter enable"] + pub fn set_cen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "TIM peripheral clock enable"] - pub const fn tim3en(&self) -> super::vals::Apb1lenrTim2en { + #[doc = "Update disable"] + pub const fn udis(&self) -> bool { let val = (self.0 >> 1usize) & 0x01; - super::vals::Apb1lenrTim2en(val as u8) + val != 0 } - #[doc = "TIM peripheral clock enable"] - pub fn set_tim3en(&mut self, val: super::vals::Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + #[doc = "Update disable"] + pub fn set_udis(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - #[doc = "TIM peripheral clock enable"] - pub const fn tim4en(&self) -> super::vals::Apb1lenrTim2en { + #[doc = "Update request source"] + pub const fn urs(&self) -> super::vals::Urs { let val = (self.0 >> 2usize) & 0x01; - super::vals::Apb1lenrTim2en(val as u8) + super::vals::Urs(val as u8) } - #[doc = "TIM peripheral clock enable"] - pub fn set_tim4en(&mut self, val: super::vals::Apb1lenrTim2en) { + #[doc = "Update request source"] + pub fn set_urs(&mut self, val: super::vals::Urs) { self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); } - #[doc = "TIM peripheral clock enable"] - pub const fn tim5en(&self) -> super::vals::Apb1lenrTim2en { + #[doc = "One-pulse mode"] + pub const fn opm(&self) -> super::vals::Opm { let val = (self.0 >> 3usize) & 0x01; - super::vals::Apb1lenrTim2en(val as u8) + super::vals::Opm(val as u8) } - #[doc = "TIM peripheral clock enable"] - pub fn set_tim5en(&mut self, val: super::vals::Apb1lenrTim2en) { + #[doc = "One-pulse mode"] + pub fn set_opm(&mut self, val: super::vals::Opm) { self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); } - #[doc = "TIM peripheral clock enable"] - pub const fn tim6en(&self) -> super::vals::Apb1lenrTim2en { + #[doc = "Direction"] + pub const fn dir(&self) -> super::vals::Dir { let val = (self.0 >> 4usize) & 0x01; - super::vals::Apb1lenrTim2en(val as u8) + super::vals::Dir(val as u8) } - #[doc = "TIM peripheral clock enable"] - pub fn set_tim6en(&mut self, val: super::vals::Apb1lenrTim2en) { + #[doc = "Direction"] + pub fn set_dir(&mut self, val: super::vals::Dir) { self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); } - #[doc = "TIM peripheral clock enable"] - pub const fn tim7en(&self) -> super::vals::Apb1lenrTim2en { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Apb1lenrTim2en(val as u8) - } - #[doc = "TIM peripheral clock enable"] - pub fn set_tim7en(&mut self, val: super::vals::Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); - } - #[doc = "TIM peripheral clock enable"] - pub const fn tim12en(&self) -> super::vals::Apb1lenrTim2en { - let val = (self.0 >> 6usize) & 0x01; - super::vals::Apb1lenrTim2en(val as u8) + #[doc = "Center-aligned mode selection"] + pub const fn cms(&self) -> super::vals::Cms { + let val = (self.0 >> 5usize) & 0x03; + super::vals::Cms(val as u8) } - #[doc = "TIM peripheral clock enable"] - pub fn set_tim12en(&mut self, val: super::vals::Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); + #[doc = "Center-aligned mode selection"] + pub fn set_cms(&mut self, val: super::vals::Cms) { + self.0 = (self.0 & !(0x03 << 5usize)) | (((val.0 as u32) & 0x03) << 5usize); } - #[doc = "TIM peripheral clock enable"] - pub const fn tim13en(&self) -> super::vals::Apb1lenrTim2en { + #[doc = "Auto-reload preload enable"] + pub const fn arpe(&self) -> super::vals::Arpe { let val = (self.0 >> 7usize) & 0x01; - super::vals::Apb1lenrTim2en(val as u8) + super::vals::Arpe(val as u8) } - #[doc = "TIM peripheral clock enable"] - pub fn set_tim13en(&mut self, val: super::vals::Apb1lenrTim2en) { + #[doc = "Auto-reload preload enable"] + pub fn set_arpe(&mut self, val: super::vals::Arpe) { self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); } - #[doc = "TIM peripheral clock enable"] - pub const fn tim14en(&self) -> super::vals::Apb1lenrTim2en { - let val = (self.0 >> 8usize) & 0x01; - super::vals::Apb1lenrTim2en(val as u8) - } - #[doc = "TIM peripheral clock enable"] - pub fn set_tim14en(&mut self, val: super::vals::Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); - } - #[doc = "LPTIM1 Peripheral Clocks Enable"] - pub const fn lptim1en(&self) -> super::vals::Apb1lenrTim2en { - let val = (self.0 >> 9usize) & 0x01; - super::vals::Apb1lenrTim2en(val as u8) + #[doc = "Clock division"] + pub const fn ckd(&self) -> super::vals::Ckd { + let val = (self.0 >> 8usize) & 0x03; + super::vals::Ckd(val as u8) } - #[doc = "LPTIM1 Peripheral Clocks Enable"] - pub fn set_lptim1en(&mut self, val: super::vals::Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + #[doc = "Clock division"] + pub fn set_ckd(&mut self, val: super::vals::Ckd) { + self.0 = (self.0 & !(0x03 << 8usize)) | (((val.0 as u32) & 0x03) << 8usize); } - #[doc = "SPI2 Peripheral Clocks Enable"] - pub const fn spi2en(&self) -> super::vals::Apb1lenrTim2en { - let val = (self.0 >> 14usize) & 0x01; - super::vals::Apb1lenrTim2en(val as u8) + } + impl Default for Cr1Gp { + fn default() -> Cr1Gp { + Cr1Gp(0) } - #[doc = "SPI2 Peripheral Clocks Enable"] - pub fn set_spi2en(&mut self, val: super::vals::Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); + } + #[doc = "capture/compare mode register 1 (input mode)"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct CcmrInput(pub u32); + impl CcmrInput { + #[doc = "Capture/Compare 1 selection"] + pub fn ccs(&self, n: usize) -> super::vals::CcmrInputCcs { + assert!(n < 2usize); + let offs = 0usize + n * 8usize; + let val = (self.0 >> offs) & 0x03; + super::vals::CcmrInputCcs(val as u8) } - #[doc = "SPI3 Peripheral Clocks Enable"] - pub const fn spi3en(&self) -> super::vals::Apb1lenrTim2en { - let val = (self.0 >> 15usize) & 0x01; - super::vals::Apb1lenrTim2en(val as u8) + #[doc = "Capture/Compare 1 selection"] + pub fn set_ccs(&mut self, n: usize, val: super::vals::CcmrInputCcs) { + assert!(n < 2usize); + let offs = 0usize + n * 8usize; + self.0 = (self.0 & !(0x03 << offs)) | (((val.0 as u32) & 0x03) << offs); } - #[doc = "SPI3 Peripheral Clocks Enable"] - pub fn set_spi3en(&mut self, val: super::vals::Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + #[doc = "Input capture 1 prescaler"] + pub fn icpsc(&self, n: usize) -> u8 { + assert!(n < 2usize); + let offs = 2usize + n * 8usize; + let val = (self.0 >> offs) & 0x03; + val as u8 } - #[doc = "SPDIFRX Peripheral Clocks Enable"] - pub const fn spdifrxen(&self) -> super::vals::Apb1lenrTim2en { - let val = (self.0 >> 16usize) & 0x01; - super::vals::Apb1lenrTim2en(val as u8) + #[doc = "Input capture 1 prescaler"] + pub fn set_icpsc(&mut self, n: usize, val: u8) { + assert!(n < 2usize); + let offs = 2usize + n * 8usize; + self.0 = (self.0 & !(0x03 << offs)) | (((val as u32) & 0x03) << offs); } - #[doc = "SPDIFRX Peripheral Clocks Enable"] - pub fn set_spdifrxen(&mut self, val: super::vals::Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + #[doc = "Input capture 1 filter"] + pub fn icf(&self, n: usize) -> super::vals::Icf { + assert!(n < 2usize); + let offs = 4usize + n * 8usize; + let val = (self.0 >> offs) & 0x0f; + super::vals::Icf(val as u8) } - #[doc = "USART2 Peripheral Clocks Enable"] - pub const fn usart2en(&self) -> super::vals::Apb1lenrTim2en { - let val = (self.0 >> 17usize) & 0x01; - super::vals::Apb1lenrTim2en(val as u8) + #[doc = "Input capture 1 filter"] + pub fn set_icf(&mut self, n: usize, val: super::vals::Icf) { + assert!(n < 2usize); + let offs = 4usize + n * 8usize; + self.0 = (self.0 & !(0x0f << offs)) | (((val.0 as u32) & 0x0f) << offs); } - #[doc = "USART2 Peripheral Clocks Enable"] - pub fn set_usart2en(&mut self, val: super::vals::Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); + } + impl Default for CcmrInput { + fn default() -> CcmrInput { + CcmrInput(0) } - #[doc = "USART3 Peripheral Clocks Enable"] - pub const fn usart3en(&self) -> super::vals::Apb1lenrTim2en { - let val = (self.0 >> 18usize) & 0x01; - super::vals::Apb1lenrTim2en(val as u8) + } + #[doc = "auto-reload register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Arr32(pub u32); + impl Arr32 { + #[doc = "Auto-reload value"] + pub const fn arr(&self) -> u32 { + let val = (self.0 >> 0usize) & 0xffff_ffff; + val as u32 } - #[doc = "USART3 Peripheral Clocks Enable"] - pub fn set_usart3en(&mut self, val: super::vals::Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); + #[doc = "Auto-reload value"] + pub fn set_arr(&mut self, val: u32) { + self.0 = + (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); } - #[doc = "UART4 Peripheral Clocks Enable"] - pub const fn uart4en(&self) -> super::vals::Apb1lenrTim2en { - let val = (self.0 >> 19usize) & 0x01; - super::vals::Apb1lenrTim2en(val as u8) + } + impl Default for Arr32 { + fn default() -> Arr32 { + Arr32(0) } - #[doc = "UART4 Peripheral Clocks Enable"] - pub fn set_uart4en(&mut self, val: super::vals::Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); + } + #[doc = "counter"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Cnt32(pub u32); + impl Cnt32 { + #[doc = "counter value"] + pub const fn cnt(&self) -> u32 { + let val = (self.0 >> 0usize) & 0xffff_ffff; + val as u32 } - #[doc = "UART5 Peripheral Clocks Enable"] - pub const fn uart5en(&self) -> super::vals::Apb1lenrTim2en { - let val = (self.0 >> 20usize) & 0x01; - super::vals::Apb1lenrTim2en(val as u8) + #[doc = "counter value"] + pub fn set_cnt(&mut self, val: u32) { + self.0 = + (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); } - #[doc = "UART5 Peripheral Clocks Enable"] - pub fn set_uart5en(&mut self, val: super::vals::Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize); + } + impl Default for Cnt32 { + fn default() -> Cnt32 { + Cnt32(0) } - #[doc = "I2C1 Peripheral Clocks Enable"] - pub const fn i2c1en(&self) -> super::vals::Apb1lenrTim2en { - let val = (self.0 >> 21usize) & 0x01; - super::vals::Apb1lenrTim2en(val as u8) + } + #[doc = "capture/compare register 1"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ccr16(pub u32); + impl Ccr16 { + #[doc = "Capture/Compare 1 value"] + pub const fn ccr(&self) -> u16 { + let val = (self.0 >> 0usize) & 0xffff; + val as u16 } - #[doc = "I2C1 Peripheral Clocks Enable"] - pub fn set_i2c1en(&mut self, val: super::vals::Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); + #[doc = "Capture/Compare 1 value"] + pub fn set_ccr(&mut self, val: u16) { + self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); } - #[doc = "I2C2 Peripheral Clocks Enable"] - pub const fn i2c2en(&self) -> super::vals::Apb1lenrTim2en { - let val = (self.0 >> 22usize) & 0x01; - super::vals::Apb1lenrTim2en(val as u8) + } + impl Default for Ccr16 { + fn default() -> Ccr16 { + Ccr16(0) } - #[doc = "I2C2 Peripheral Clocks Enable"] - pub fn set_i2c2en(&mut self, val: super::vals::Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); + } + #[doc = "DMA control register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Dcr(pub u32); + impl Dcr { + #[doc = "DMA base address"] + pub const fn dba(&self) -> u8 { + let val = (self.0 >> 0usize) & 0x1f; + val as u8 } - #[doc = "I2C3 Peripheral Clocks Enable"] - pub const fn i2c3en(&self) -> super::vals::Apb1lenrTim2en { - let val = (self.0 >> 23usize) & 0x01; - super::vals::Apb1lenrTim2en(val as u8) + #[doc = "DMA base address"] + pub fn set_dba(&mut self, val: u8) { + self.0 = (self.0 & !(0x1f << 0usize)) | (((val as u32) & 0x1f) << 0usize); } - #[doc = "I2C3 Peripheral Clocks Enable"] - pub fn set_i2c3en(&mut self, val: super::vals::Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize); + #[doc = "DMA burst length"] + pub const fn dbl(&self) -> u8 { + let val = (self.0 >> 8usize) & 0x1f; + val as u8 } - #[doc = "HDMI-CEC peripheral clock enable"] - pub const fn cecen(&self) -> super::vals::Apb1lenrTim2en { - let val = (self.0 >> 27usize) & 0x01; - super::vals::Apb1lenrTim2en(val as u8) + #[doc = "DMA burst length"] + pub fn set_dbl(&mut self, val: u8) { + self.0 = (self.0 & !(0x1f << 8usize)) | (((val as u32) & 0x1f) << 8usize); } - #[doc = "HDMI-CEC peripheral clock enable"] - pub fn set_cecen(&mut self, val: super::vals::Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize); + } + impl Default for Dcr { + fn default() -> Dcr { + Dcr(0) } - #[doc = "DAC1&2 peripheral clock enable"] - pub const fn dac12en(&self) -> super::vals::Apb1lenrTim2en { - let val = (self.0 >> 29usize) & 0x01; - super::vals::Apb1lenrTim2en(val as u8) - } - #[doc = "DAC1&2 peripheral clock enable"] - pub fn set_dac12en(&mut self, val: super::vals::Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); - } - #[doc = "UART7 Peripheral Clocks Enable"] - pub const fn uart7en(&self) -> super::vals::Apb1lenrTim2en { - let val = (self.0 >> 30usize) & 0x01; - super::vals::Apb1lenrTim2en(val as u8) - } - #[doc = "UART7 Peripheral Clocks Enable"] - pub fn set_uart7en(&mut self, val: super::vals::Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize); - } - #[doc = "UART8 Peripheral Clocks Enable"] - pub const fn uart8en(&self) -> super::vals::Apb1lenrTim2en { - let val = (self.0 >> 31usize) & 0x01; - super::vals::Apb1lenrTim2en(val as u8) + } + #[doc = "auto-reload register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Arr16(pub u32); + impl Arr16 { + #[doc = "Auto-reload value"] + pub const fn arr(&self) -> u16 { + let val = (self.0 >> 0usize) & 0xffff; + val as u16 } - #[doc = "UART8 Peripheral Clocks Enable"] - pub fn set_uart8en(&mut self, val: super::vals::Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); + #[doc = "Auto-reload value"] + pub fn set_arr(&mut self, val: u16) { + self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); } } - impl Default for Apb1lenr { - fn default() -> Apb1lenr { - Apb1lenr(0) + impl Default for Arr16 { + fn default() -> Arr16 { + Arr16(0) } } - #[doc = "RCC PLL2 Fractional Divider Register"] + #[doc = "control register 2"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Pll2fracr(pub u32); - impl Pll2fracr { - #[doc = "Fractional part of the multiplication factor for PLL VCO"] - pub const fn fracn2(&self) -> u16 { - let val = (self.0 >> 3usize) & 0x1fff; - val as u16 + pub struct Cr2Basic(pub u32); + impl Cr2Basic { + #[doc = "Master mode selection"] + pub const fn mms(&self) -> super::vals::Mms { + let val = (self.0 >> 4usize) & 0x07; + super::vals::Mms(val as u8) } - #[doc = "Fractional part of the multiplication factor for PLL VCO"] - pub fn set_fracn2(&mut self, val: u16) { - self.0 = (self.0 & !(0x1fff << 3usize)) | (((val as u32) & 0x1fff) << 3usize); + #[doc = "Master mode selection"] + pub fn set_mms(&mut self, val: super::vals::Mms) { + self.0 = (self.0 & !(0x07 << 4usize)) | (((val.0 as u32) & 0x07) << 4usize); } } - impl Default for Pll2fracr { - fn default() -> Pll2fracr { - Pll2fracr(0) + impl Default for Cr2Basic { + fn default() -> Cr2Basic { + Cr2Basic(0) } } - #[doc = "RCC AHB4 Sleep Clock Register"] + #[doc = "DMA/Interrupt enable register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct C1Ahb4lpenr(pub u32); - impl C1Ahb4lpenr { - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub const fn gpioalpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { + pub struct DierGp(pub u32); + impl DierGp { + #[doc = "Update interrupt enable"] + pub const fn uie(&self) -> bool { let val = (self.0 >> 0usize) & 0x01; - super::vals::C1Ahb4lpenrGpioalpen(val as u8) - } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub fn set_gpioalpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + val != 0 } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub const fn gpioblpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { - let val = (self.0 >> 1usize) & 0x01; - super::vals::C1Ahb4lpenrGpioalpen(val as u8) + #[doc = "Update interrupt enable"] + pub fn set_uie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub fn set_gpioblpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + #[doc = "Capture/Compare 1 interrupt enable"] + pub fn ccie(&self, n: usize) -> bool { + assert!(n < 4usize); + let offs = 1usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; + val != 0 } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub const fn gpioclpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { - let val = (self.0 >> 2usize) & 0x01; - super::vals::C1Ahb4lpenrGpioalpen(val as u8) + #[doc = "Capture/Compare 1 interrupt enable"] + pub fn set_ccie(&mut self, n: usize, val: bool) { + assert!(n < 4usize); + let offs = 1usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub fn set_gpioclpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); + #[doc = "Trigger interrupt enable"] + pub const fn tie(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub const fn gpiodlpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { - let val = (self.0 >> 3usize) & 0x01; - super::vals::C1Ahb4lpenrGpioalpen(val as u8) + #[doc = "Trigger interrupt enable"] + pub fn set_tie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub fn set_gpiodlpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); + #[doc = "Update DMA request enable"] + pub const fn ude(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub const fn gpioelpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { - let val = (self.0 >> 4usize) & 0x01; - super::vals::C1Ahb4lpenrGpioalpen(val as u8) + #[doc = "Update DMA request enable"] + pub fn set_ude(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub fn set_gpioelpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + #[doc = "Capture/Compare 1 DMA request enable"] + pub fn ccde(&self, n: usize) -> bool { + assert!(n < 4usize); + let offs = 9usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; + val != 0 } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub const fn gpioflpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { - let val = (self.0 >> 5usize) & 0x01; - super::vals::C1Ahb4lpenrGpioalpen(val as u8) + #[doc = "Capture/Compare 1 DMA request enable"] + pub fn set_ccde(&mut self, n: usize, val: bool) { + assert!(n < 4usize); + let offs = 9usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub fn set_gpioflpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + #[doc = "Trigger DMA request enable"] + pub const fn tde(&self) -> bool { + let val = (self.0 >> 14usize) & 0x01; + val != 0 } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub const fn gpioglpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { - let val = (self.0 >> 6usize) & 0x01; - super::vals::C1Ahb4lpenrGpioalpen(val as u8) + #[doc = "Trigger DMA request enable"] + pub fn set_tde(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub fn set_gpioglpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); + } + impl Default for DierGp { + fn default() -> DierGp { + DierGp(0) } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub const fn gpiohlpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { - let val = (self.0 >> 7usize) & 0x01; - super::vals::C1Ahb4lpenrGpioalpen(val as u8) + } + #[doc = "DMA/Interrupt enable register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct DierBasic(pub u32); + impl DierBasic { + #[doc = "Update interrupt enable"] + pub const fn uie(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub fn set_gpiohlpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); + #[doc = "Update interrupt enable"] + pub fn set_uie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub const fn gpioilpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { + #[doc = "Update DMA request enable"] + pub const fn ude(&self) -> bool { let val = (self.0 >> 8usize) & 0x01; - super::vals::C1Ahb4lpenrGpioalpen(val as u8) - } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub fn set_gpioilpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); + val != 0 } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub const fn gpiojlpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { - let val = (self.0 >> 9usize) & 0x01; - super::vals::C1Ahb4lpenrGpioalpen(val as u8) + #[doc = "Update DMA request enable"] + pub fn set_ude(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub fn set_gpiojlpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + } + impl Default for DierBasic { + fn default() -> DierBasic { + DierBasic(0) } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub const fn gpioklpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { - let val = (self.0 >> 10usize) & 0x01; - super::vals::C1Ahb4lpenrGpioalpen(val as u8) + } + #[doc = "capture/compare mode register 2 (output mode)"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct CcmrOutput(pub u32); + impl CcmrOutput { + #[doc = "Capture/Compare 3 selection"] + pub fn ccs(&self, n: usize) -> super::vals::CcmrOutputCcs { + assert!(n < 2usize); + let offs = 0usize + n * 8usize; + let val = (self.0 >> offs) & 0x03; + super::vals::CcmrOutputCcs(val as u8) } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub fn set_gpioklpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); + #[doc = "Capture/Compare 3 selection"] + pub fn set_ccs(&mut self, n: usize, val: super::vals::CcmrOutputCcs) { + assert!(n < 2usize); + let offs = 0usize + n * 8usize; + self.0 = (self.0 & !(0x03 << offs)) | (((val.0 as u32) & 0x03) << offs); } - #[doc = "CRC peripheral clock enable during CSleep mode"] - pub const fn crclpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { - let val = (self.0 >> 19usize) & 0x01; - super::vals::C1Ahb4lpenrGpioalpen(val as u8) + #[doc = "Output compare 3 fast enable"] + pub fn ocfe(&self, n: usize) -> bool { + assert!(n < 2usize); + let offs = 2usize + n * 8usize; + let val = (self.0 >> offs) & 0x01; + val != 0 } - #[doc = "CRC peripheral clock enable during CSleep mode"] - pub fn set_crclpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { - self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); - } - #[doc = "BDMA Clock Enable During CSleep Mode"] - pub const fn bdmalpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { - let val = (self.0 >> 21usize) & 0x01; - super::vals::C1Ahb4lpenrGpioalpen(val as u8) - } - #[doc = "BDMA Clock Enable During CSleep Mode"] - pub fn set_bdmalpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); + #[doc = "Output compare 3 fast enable"] + pub fn set_ocfe(&mut self, n: usize, val: bool) { + assert!(n < 2usize); + let offs = 2usize + n * 8usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "ADC3 Peripheral Clocks Enable During CSleep Mode"] - pub const fn adc3lpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { - let val = (self.0 >> 24usize) & 0x01; - super::vals::C1Ahb4lpenrGpioalpen(val as u8) + #[doc = "Output compare 3 preload enable"] + pub fn ocpe(&self, n: usize) -> super::vals::Ocpe { + assert!(n < 2usize); + let offs = 3usize + n * 8usize; + let val = (self.0 >> offs) & 0x01; + super::vals::Ocpe(val as u8) } - #[doc = "ADC3 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_adc3lpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { - self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); + #[doc = "Output compare 3 preload enable"] + pub fn set_ocpe(&mut self, n: usize, val: super::vals::Ocpe) { + assert!(n < 2usize); + let offs = 3usize + n * 8usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); } - #[doc = "Backup RAM Clock Enable During CSleep Mode"] - pub const fn bkpramlpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { - let val = (self.0 >> 28usize) & 0x01; - super::vals::C1Ahb4lpenrGpioalpen(val as u8) + #[doc = "Output compare 3 mode"] + pub fn ocm(&self, n: usize) -> super::vals::Ocm { + assert!(n < 2usize); + let offs = 4usize + n * 8usize; + let val = (self.0 >> offs) & 0x07; + super::vals::Ocm(val as u8) } - #[doc = "Backup RAM Clock Enable During CSleep Mode"] - pub fn set_bkpramlpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { - self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); + #[doc = "Output compare 3 mode"] + pub fn set_ocm(&mut self, n: usize, val: super::vals::Ocm) { + assert!(n < 2usize); + let offs = 4usize + n * 8usize; + self.0 = (self.0 & !(0x07 << offs)) | (((val.0 as u32) & 0x07) << offs); } - #[doc = "SRAM4 Clock Enable During CSleep Mode"] - pub const fn sram4lpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { - let val = (self.0 >> 29usize) & 0x01; - super::vals::C1Ahb4lpenrGpioalpen(val as u8) + #[doc = "Output compare 3 clear enable"] + pub fn occe(&self, n: usize) -> bool { + assert!(n < 2usize); + let offs = 7usize + n * 8usize; + let val = (self.0 >> offs) & 0x01; + val != 0 } - #[doc = "SRAM4 Clock Enable During CSleep Mode"] - pub fn set_sram4lpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { - self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); + #[doc = "Output compare 3 clear enable"] + pub fn set_occe(&mut self, n: usize, val: bool) { + assert!(n < 2usize); + let offs = 7usize + n * 8usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } } - impl Default for C1Ahb4lpenr { - fn default() -> C1Ahb4lpenr { - C1Ahb4lpenr(0) + impl Default for CcmrOutput { + fn default() -> CcmrOutput { + CcmrOutput(0) } } - #[doc = "RCC D3 Autonomous mode Register"] + #[doc = "status register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct D3amr(pub u32); - impl D3amr { - #[doc = "BDMA and DMAMUX Autonomous mode enable"] - pub const fn bdmaamen(&self) -> super::vals::Bdmaamen { + pub struct SrAdv(pub u32); + impl SrAdv { + #[doc = "Update interrupt flag"] + pub const fn uif(&self) -> bool { let val = (self.0 >> 0usize) & 0x01; - super::vals::Bdmaamen(val as u8) + val != 0 } - #[doc = "BDMA and DMAMUX Autonomous mode enable"] - pub fn set_bdmaamen(&mut self, val: super::vals::Bdmaamen) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + #[doc = "Update interrupt flag"] + pub fn set_uif(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "LPUART1 Autonomous mode enable"] - pub const fn lpuart1amen(&self) -> super::vals::Bdmaamen { - let val = (self.0 >> 3usize) & 0x01; - super::vals::Bdmaamen(val as u8) + #[doc = "Capture/compare 1 interrupt flag"] + pub fn ccif(&self, n: usize) -> bool { + assert!(n < 4usize); + let offs = 1usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; + val != 0 } - #[doc = "LPUART1 Autonomous mode enable"] - pub fn set_lpuart1amen(&mut self, val: super::vals::Bdmaamen) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); + #[doc = "Capture/compare 1 interrupt flag"] + pub fn set_ccif(&mut self, n: usize, val: bool) { + assert!(n < 4usize); + let offs = 1usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "SPI6 Autonomous mode enable"] - pub const fn spi6amen(&self) -> super::vals::Bdmaamen { + #[doc = "COM interrupt flag"] + pub const fn comif(&self) -> bool { let val = (self.0 >> 5usize) & 0x01; - super::vals::Bdmaamen(val as u8) - } - #[doc = "SPI6 Autonomous mode enable"] - pub fn set_spi6amen(&mut self, val: super::vals::Bdmaamen) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); - } - #[doc = "I2C4 Autonomous mode enable"] - pub const fn i2c4amen(&self) -> super::vals::Bdmaamen { - let val = (self.0 >> 7usize) & 0x01; - super::vals::Bdmaamen(val as u8) + val != 0 } - #[doc = "I2C4 Autonomous mode enable"] - pub fn set_i2c4amen(&mut self, val: super::vals::Bdmaamen) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); + #[doc = "COM interrupt flag"] + pub fn set_comif(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); } - #[doc = "LPTIM2 Autonomous mode enable"] - pub const fn lptim2amen(&self) -> super::vals::Bdmaamen { - let val = (self.0 >> 9usize) & 0x01; - super::vals::Bdmaamen(val as u8) + #[doc = "Trigger interrupt flag"] + pub const fn tif(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 } - #[doc = "LPTIM2 Autonomous mode enable"] - pub fn set_lptim2amen(&mut self, val: super::vals::Bdmaamen) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + #[doc = "Trigger interrupt flag"] + pub fn set_tif(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - #[doc = "LPTIM3 Autonomous mode enable"] - pub const fn lptim3amen(&self) -> super::vals::Bdmaamen { - let val = (self.0 >> 10usize) & 0x01; - super::vals::Bdmaamen(val as u8) + #[doc = "Break interrupt flag"] + pub const fn bif(&self) -> bool { + let val = (self.0 >> 7usize) & 0x01; + val != 0 } - #[doc = "LPTIM3 Autonomous mode enable"] - pub fn set_lptim3amen(&mut self, val: super::vals::Bdmaamen) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); + #[doc = "Break interrupt flag"] + pub fn set_bif(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); } - #[doc = "LPTIM4 Autonomous mode enable"] - pub const fn lptim4amen(&self) -> super::vals::Bdmaamen { - let val = (self.0 >> 11usize) & 0x01; - super::vals::Bdmaamen(val as u8) + #[doc = "Capture/Compare 1 overcapture flag"] + pub fn ccof(&self, n: usize) -> bool { + assert!(n < 4usize); + let offs = 9usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; + val != 0 } - #[doc = "LPTIM4 Autonomous mode enable"] - pub fn set_lptim4amen(&mut self, val: super::vals::Bdmaamen) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); + #[doc = "Capture/Compare 1 overcapture flag"] + pub fn set_ccof(&mut self, n: usize, val: bool) { + assert!(n < 4usize); + let offs = 9usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "LPTIM5 Autonomous mode enable"] - pub const fn lptim5amen(&self) -> super::vals::Bdmaamen { - let val = (self.0 >> 12usize) & 0x01; - super::vals::Bdmaamen(val as u8) + } + impl Default for SrAdv { + fn default() -> SrAdv { + SrAdv(0) } - #[doc = "LPTIM5 Autonomous mode enable"] - pub fn set_lptim5amen(&mut self, val: super::vals::Bdmaamen) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); + } + #[doc = "capture/compare enable register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct CcerGp(pub u32); + impl CcerGp { + #[doc = "Capture/Compare 1 output enable"] + pub fn cce(&self, n: usize) -> bool { + assert!(n < 4usize); + let offs = 0usize + n * 4usize; + let val = (self.0 >> offs) & 0x01; + val != 0 } - #[doc = "COMP12 Autonomous mode enable"] - pub const fn comp12amen(&self) -> super::vals::Bdmaamen { - let val = (self.0 >> 14usize) & 0x01; - super::vals::Bdmaamen(val as u8) + #[doc = "Capture/Compare 1 output enable"] + pub fn set_cce(&mut self, n: usize, val: bool) { + assert!(n < 4usize); + let offs = 0usize + n * 4usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "COMP12 Autonomous mode enable"] - pub fn set_comp12amen(&mut self, val: super::vals::Bdmaamen) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); + #[doc = "Capture/Compare 1 output Polarity"] + pub fn ccp(&self, n: usize) -> bool { + assert!(n < 4usize); + let offs = 1usize + n * 4usize; + let val = (self.0 >> offs) & 0x01; + val != 0 } - #[doc = "VREF Autonomous mode enable"] - pub const fn vrefamen(&self) -> super::vals::Bdmaamen { - let val = (self.0 >> 15usize) & 0x01; - super::vals::Bdmaamen(val as u8) + #[doc = "Capture/Compare 1 output Polarity"] + pub fn set_ccp(&mut self, n: usize, val: bool) { + assert!(n < 4usize); + let offs = 1usize + n * 4usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "VREF Autonomous mode enable"] - pub fn set_vrefamen(&mut self, val: super::vals::Bdmaamen) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + #[doc = "Capture/Compare 1 output Polarity"] + pub fn ccnp(&self, n: usize) -> bool { + assert!(n < 4usize); + let offs = 3usize + n * 4usize; + let val = (self.0 >> offs) & 0x01; + val != 0 } - #[doc = "RTC Autonomous mode enable"] - pub const fn rtcamen(&self) -> super::vals::Bdmaamen { - let val = (self.0 >> 16usize) & 0x01; - super::vals::Bdmaamen(val as u8) + #[doc = "Capture/Compare 1 output Polarity"] + pub fn set_ccnp(&mut self, n: usize, val: bool) { + assert!(n < 4usize); + let offs = 3usize + n * 4usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "RTC Autonomous mode enable"] - pub fn set_rtcamen(&mut self, val: super::vals::Bdmaamen) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + } + impl Default for CcerGp { + fn default() -> CcerGp { + CcerGp(0) } - #[doc = "CRC Autonomous mode enable"] - pub const fn crcamen(&self) -> super::vals::Bdmaamen { - let val = (self.0 >> 19usize) & 0x01; - super::vals::Bdmaamen(val as u8) + } + #[doc = "break and dead-time register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Bdtr(pub u32); + impl Bdtr { + #[doc = "Dead-time generator setup"] + pub const fn dtg(&self) -> u8 { + let val = (self.0 >> 0usize) & 0xff; + val as u8 } - #[doc = "CRC Autonomous mode enable"] - pub fn set_crcamen(&mut self, val: super::vals::Bdmaamen) { - self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); + #[doc = "Dead-time generator setup"] + pub fn set_dtg(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize); } - #[doc = "SAI4 Autonomous mode enable"] - pub const fn sai4amen(&self) -> super::vals::Bdmaamen { - let val = (self.0 >> 21usize) & 0x01; - super::vals::Bdmaamen(val as u8) + #[doc = "Lock configuration"] + pub const fn lock(&self) -> u8 { + let val = (self.0 >> 8usize) & 0x03; + val as u8 } - #[doc = "SAI4 Autonomous mode enable"] - pub fn set_sai4amen(&mut self, val: super::vals::Bdmaamen) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); + #[doc = "Lock configuration"] + pub fn set_lock(&mut self, val: u8) { + self.0 = (self.0 & !(0x03 << 8usize)) | (((val as u32) & 0x03) << 8usize); } - #[doc = "ADC3 Autonomous mode enable"] - pub const fn adc3amen(&self) -> super::vals::Bdmaamen { - let val = (self.0 >> 24usize) & 0x01; - super::vals::Bdmaamen(val as u8) + #[doc = "Off-state selection for Idle mode"] + pub const fn ossi(&self) -> super::vals::Ossi { + let val = (self.0 >> 10usize) & 0x01; + super::vals::Ossi(val as u8) } - #[doc = "ADC3 Autonomous mode enable"] - pub fn set_adc3amen(&mut self, val: super::vals::Bdmaamen) { - self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); + #[doc = "Off-state selection for Idle mode"] + pub fn set_ossi(&mut self, val: super::vals::Ossi) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); } - #[doc = "Backup RAM Autonomous mode enable"] - pub const fn bkpramamen(&self) -> super::vals::Bdmaamen { - let val = (self.0 >> 28usize) & 0x01; - super::vals::Bdmaamen(val as u8) + #[doc = "Off-state selection for Run mode"] + pub const fn ossr(&self) -> super::vals::Ossr { + let val = (self.0 >> 11usize) & 0x01; + super::vals::Ossr(val as u8) } - #[doc = "Backup RAM Autonomous mode enable"] - pub fn set_bkpramamen(&mut self, val: super::vals::Bdmaamen) { - self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); + #[doc = "Off-state selection for Run mode"] + pub fn set_ossr(&mut self, val: super::vals::Ossr) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); } - #[doc = "SRAM4 Autonomous mode enable"] - pub const fn sram4amen(&self) -> super::vals::Bdmaamen { - let val = (self.0 >> 29usize) & 0x01; - super::vals::Bdmaamen(val as u8) + #[doc = "Break enable"] + pub const fn bke(&self) -> bool { + let val = (self.0 >> 12usize) & 0x01; + val != 0 } - #[doc = "SRAM4 Autonomous mode enable"] - pub fn set_sram4amen(&mut self, val: super::vals::Bdmaamen) { - self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); + #[doc = "Break enable"] + pub fn set_bke(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); + } + #[doc = "Break polarity"] + pub const fn bkp(&self) -> bool { + let val = (self.0 >> 13usize) & 0x01; + val != 0 + } + #[doc = "Break polarity"] + pub fn set_bkp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); + } + #[doc = "Automatic output enable"] + pub const fn aoe(&self) -> bool { + let val = (self.0 >> 14usize) & 0x01; + val != 0 + } + #[doc = "Automatic output enable"] + pub fn set_aoe(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); + } + #[doc = "Main output enable"] + pub const fn moe(&self) -> bool { + let val = (self.0 >> 15usize) & 0x01; + val != 0 + } + #[doc = "Main output enable"] + pub fn set_moe(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); } } - impl Default for D3amr { - fn default() -> D3amr { - D3amr(0) + impl Default for Bdtr { + fn default() -> Bdtr { + Bdtr(0) } } - #[doc = "RCC APB3 Sleep Clock Register"] + #[doc = "event generation register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Apb3lpenr(pub u32); - impl Apb3lpenr { - #[doc = "LTDC peripheral clock enable during CSleep mode"] - pub const fn ltdclpen(&self) -> super::vals::Apb3lpenrLtdclpen { - let val = (self.0 >> 3usize) & 0x01; - super::vals::Apb3lpenrLtdclpen(val as u8) + pub struct EgrBasic(pub u32); + impl EgrBasic { + #[doc = "Update generation"] + pub const fn ug(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 } - #[doc = "LTDC peripheral clock enable during CSleep mode"] - pub fn set_ltdclpen(&mut self, val: super::vals::Apb3lpenrLtdclpen) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); + #[doc = "Update generation"] + pub fn set_ug(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "WWDG1 Clock Enable During CSleep Mode"] - pub const fn wwdg1lpen(&self) -> super::vals::Apb3lpenrLtdclpen { - let val = (self.0 >> 6usize) & 0x01; - super::vals::Apb3lpenrLtdclpen(val as u8) + } + impl Default for EgrBasic { + fn default() -> EgrBasic { + EgrBasic(0) } - #[doc = "WWDG1 Clock Enable During CSleep Mode"] - pub fn set_wwdg1lpen(&mut self, val: super::vals::Apb3lpenrLtdclpen) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); + } + #[doc = "capture/compare register 1"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ccr32(pub u32); + impl Ccr32 { + #[doc = "Capture/Compare 1 value"] + pub const fn ccr(&self) -> u32 { + let val = (self.0 >> 0usize) & 0xffff_ffff; + val as u32 + } + #[doc = "Capture/Compare 1 value"] + pub fn set_ccr(&mut self, val: u32) { + self.0 = + (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); } } - impl Default for Apb3lpenr { - fn default() -> Apb3lpenr { - Apb3lpenr(0) + impl Default for Ccr32 { + fn default() -> Ccr32 { + Ccr32(0) } } - #[doc = "RCC AHB1 Clock Register"] + #[doc = "event generation register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct C1Ahb1enr(pub u32); - impl C1Ahb1enr { - #[doc = "DMA1 Clock Enable"] - pub const fn dma1en(&self) -> super::vals::C1Ahb1enrDma1en { + pub struct EgrAdv(pub u32); + impl EgrAdv { + #[doc = "Update generation"] + pub const fn ug(&self) -> bool { let val = (self.0 >> 0usize) & 0x01; - super::vals::C1Ahb1enrDma1en(val as u8) + val != 0 } - #[doc = "DMA1 Clock Enable"] - pub fn set_dma1en(&mut self, val: super::vals::C1Ahb1enrDma1en) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + #[doc = "Update generation"] + pub fn set_ug(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "DMA2 Clock Enable"] - pub const fn dma2en(&self) -> super::vals::C1Ahb1enrDma1en { - let val = (self.0 >> 1usize) & 0x01; - super::vals::C1Ahb1enrDma1en(val as u8) + #[doc = "Capture/compare 1 generation"] + pub fn ccg(&self, n: usize) -> bool { + assert!(n < 4usize); + let offs = 1usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; + val != 0 } - #[doc = "DMA2 Clock Enable"] - pub fn set_dma2en(&mut self, val: super::vals::C1Ahb1enrDma1en) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + #[doc = "Capture/compare 1 generation"] + pub fn set_ccg(&mut self, n: usize, val: bool) { + assert!(n < 4usize); + let offs = 1usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "ADC1/2 Peripheral Clocks Enable"] - pub const fn adc12en(&self) -> super::vals::C1Ahb1enrDma1en { + #[doc = "Capture/Compare control update generation"] + pub const fn comg(&self) -> bool { let val = (self.0 >> 5usize) & 0x01; - super::vals::C1Ahb1enrDma1en(val as u8) - } - #[doc = "ADC1/2 Peripheral Clocks Enable"] - pub fn set_adc12en(&mut self, val: super::vals::C1Ahb1enrDma1en) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); - } - #[doc = "Ethernet MAC bus interface Clock Enable"] - pub const fn eth1macen(&self) -> super::vals::C1Ahb1enrDma1en { - let val = (self.0 >> 15usize) & 0x01; - super::vals::C1Ahb1enrDma1en(val as u8) + val != 0 } - #[doc = "Ethernet MAC bus interface Clock Enable"] - pub fn set_eth1macen(&mut self, val: super::vals::C1Ahb1enrDma1en) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + #[doc = "Capture/Compare control update generation"] + pub fn set_comg(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); } - #[doc = "Ethernet Transmission Clock Enable"] - pub const fn eth1txen(&self) -> super::vals::C1Ahb1enrDma1en { - let val = (self.0 >> 16usize) & 0x01; - super::vals::C1Ahb1enrDma1en(val as u8) + #[doc = "Trigger generation"] + pub const fn tg(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 } - #[doc = "Ethernet Transmission Clock Enable"] - pub fn set_eth1txen(&mut self, val: super::vals::C1Ahb1enrDma1en) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + #[doc = "Trigger generation"] + pub fn set_tg(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - #[doc = "Ethernet Reception Clock Enable"] - pub const fn eth1rxen(&self) -> super::vals::C1Ahb1enrDma1en { - let val = (self.0 >> 17usize) & 0x01; - super::vals::C1Ahb1enrDma1en(val as u8) + #[doc = "Break generation"] + pub const fn bg(&self) -> bool { + let val = (self.0 >> 7usize) & 0x01; + val != 0 } - #[doc = "Ethernet Reception Clock Enable"] - pub fn set_eth1rxen(&mut self, val: super::vals::C1Ahb1enrDma1en) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); + #[doc = "Break generation"] + pub fn set_bg(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); } - #[doc = "USB1OTG Peripheral Clocks Enable"] - pub const fn usb1otgen(&self) -> super::vals::C1Ahb1enrDma1en { - let val = (self.0 >> 25usize) & 0x01; - super::vals::C1Ahb1enrDma1en(val as u8) + } + impl Default for EgrAdv { + fn default() -> EgrAdv { + EgrAdv(0) } - #[doc = "USB1OTG Peripheral Clocks Enable"] - pub fn set_usb1otgen(&mut self, val: super::vals::C1Ahb1enrDma1en) { - self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize); - } - #[doc = "USB_PHY1 Clocks Enable"] - pub const fn usb1ulpien(&self) -> super::vals::C1Ahb1enrDma1en { - let val = (self.0 >> 26usize) & 0x01; - super::vals::C1Ahb1enrDma1en(val as u8) - } - #[doc = "USB_PHY1 Clocks Enable"] - pub fn set_usb1ulpien(&mut self, val: super::vals::C1Ahb1enrDma1en) { - self.0 = (self.0 & !(0x01 << 26usize)) | (((val.0 as u32) & 0x01) << 26usize); + } + #[doc = "slave mode control register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Smcr(pub u32); + impl Smcr { + #[doc = "Slave mode selection"] + pub const fn sms(&self) -> super::vals::Sms { + let val = (self.0 >> 0usize) & 0x07; + super::vals::Sms(val as u8) } - #[doc = "USB2OTG Peripheral Clocks Enable"] - pub const fn usb2otgen(&self) -> super::vals::C1Ahb1enrDma1en { - let val = (self.0 >> 27usize) & 0x01; - super::vals::C1Ahb1enrDma1en(val as u8) + #[doc = "Slave mode selection"] + pub fn set_sms(&mut self, val: super::vals::Sms) { + self.0 = (self.0 & !(0x07 << 0usize)) | (((val.0 as u32) & 0x07) << 0usize); } - #[doc = "USB2OTG Peripheral Clocks Enable"] - pub fn set_usb2otgen(&mut self, val: super::vals::C1Ahb1enrDma1en) { - self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize); + #[doc = "Trigger selection"] + pub const fn ts(&self) -> super::vals::Ts { + let val = (self.0 >> 4usize) & 0x07; + super::vals::Ts(val as u8) } - #[doc = "USB_PHY2 Clocks Enable"] - pub const fn usb2ulpien(&self) -> super::vals::C1Ahb1enrDma1en { - let val = (self.0 >> 28usize) & 0x01; - super::vals::C1Ahb1enrDma1en(val as u8) + #[doc = "Trigger selection"] + pub fn set_ts(&mut self, val: super::vals::Ts) { + self.0 = (self.0 & !(0x07 << 4usize)) | (((val.0 as u32) & 0x07) << 4usize); } - #[doc = "USB_PHY2 Clocks Enable"] - pub fn set_usb2ulpien(&mut self, val: super::vals::C1Ahb1enrDma1en) { - self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); + #[doc = "Master/Slave mode"] + pub const fn msm(&self) -> super::vals::Msm { + let val = (self.0 >> 7usize) & 0x01; + super::vals::Msm(val as u8) } - } - impl Default for C1Ahb1enr { - fn default() -> C1Ahb1enr { - C1Ahb1enr(0) + #[doc = "Master/Slave mode"] + pub fn set_msm(&mut self, val: super::vals::Msm) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); } - } - #[doc = "RCC AHB1 Sleep Clock Register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ahb1lpenr(pub u32); - impl Ahb1lpenr { - #[doc = "DMA1 Clock Enable During CSleep Mode"] - pub const fn dma1lpen(&self) -> super::vals::Ahb1lpenrDma1lpen { - let val = (self.0 >> 0usize) & 0x01; - super::vals::Ahb1lpenrDma1lpen(val as u8) + #[doc = "External trigger filter"] + pub const fn etf(&self) -> super::vals::Etf { + let val = (self.0 >> 8usize) & 0x0f; + super::vals::Etf(val as u8) } - #[doc = "DMA1 Clock Enable During CSleep Mode"] - pub fn set_dma1lpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + #[doc = "External trigger filter"] + pub fn set_etf(&mut self, val: super::vals::Etf) { + self.0 = (self.0 & !(0x0f << 8usize)) | (((val.0 as u32) & 0x0f) << 8usize); } - #[doc = "DMA2 Clock Enable During CSleep Mode"] - pub const fn dma2lpen(&self) -> super::vals::Ahb1lpenrDma1lpen { - let val = (self.0 >> 1usize) & 0x01; - super::vals::Ahb1lpenrDma1lpen(val as u8) + #[doc = "External trigger prescaler"] + pub const fn etps(&self) -> super::vals::Etps { + let val = (self.0 >> 12usize) & 0x03; + super::vals::Etps(val as u8) } - #[doc = "DMA2 Clock Enable During CSleep Mode"] - pub fn set_dma2lpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + #[doc = "External trigger prescaler"] + pub fn set_etps(&mut self, val: super::vals::Etps) { + self.0 = (self.0 & !(0x03 << 12usize)) | (((val.0 as u32) & 0x03) << 12usize); } - #[doc = "ADC1/2 Peripheral Clocks Enable During CSleep Mode"] - pub const fn adc12lpen(&self) -> super::vals::Ahb1lpenrDma1lpen { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Ahb1lpenrDma1lpen(val as u8) + #[doc = "External clock enable"] + pub const fn ece(&self) -> super::vals::Ece { + let val = (self.0 >> 14usize) & 0x01; + super::vals::Ece(val as u8) } - #[doc = "ADC1/2 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_adc12lpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + #[doc = "External clock enable"] + pub fn set_ece(&mut self, val: super::vals::Ece) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); } - #[doc = "Ethernet MAC bus interface Clock Enable During CSleep Mode"] - pub const fn eth1maclpen(&self) -> super::vals::Ahb1lpenrDma1lpen { + #[doc = "External trigger polarity"] + pub const fn etp(&self) -> super::vals::Etp { let val = (self.0 >> 15usize) & 0x01; - super::vals::Ahb1lpenrDma1lpen(val as u8) + super::vals::Etp(val as u8) } - #[doc = "Ethernet MAC bus interface Clock Enable During CSleep Mode"] - pub fn set_eth1maclpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) { + #[doc = "External trigger polarity"] + pub fn set_etp(&mut self, val: super::vals::Etp) { self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); } - #[doc = "Ethernet Transmission Clock Enable During CSleep Mode"] - pub const fn eth1txlpen(&self) -> super::vals::Ahb1lpenrDma1lpen { - let val = (self.0 >> 16usize) & 0x01; - super::vals::Ahb1lpenrDma1lpen(val as u8) - } - #[doc = "Ethernet Transmission Clock Enable During CSleep Mode"] - pub fn set_eth1txlpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + } + impl Default for Smcr { + fn default() -> Smcr { + Smcr(0) } - #[doc = "Ethernet Reception Clock Enable During CSleep Mode"] - pub const fn eth1rxlpen(&self) -> super::vals::Ahb1lpenrDma1lpen { - let val = (self.0 >> 17usize) & 0x01; - super::vals::Ahb1lpenrDma1lpen(val as u8) + } + #[doc = "event generation register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct EgrGp(pub u32); + impl EgrGp { + #[doc = "Update generation"] + pub const fn ug(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 } - #[doc = "Ethernet Reception Clock Enable During CSleep Mode"] - pub fn set_eth1rxlpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); + #[doc = "Update generation"] + pub fn set_ug(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "USB1OTG peripheral clock enable during CSleep mode"] - pub const fn usb1otglpen(&self) -> super::vals::Ahb1lpenrDma1lpen { - let val = (self.0 >> 25usize) & 0x01; - super::vals::Ahb1lpenrDma1lpen(val as u8) + #[doc = "Capture/compare 1 generation"] + pub fn ccg(&self, n: usize) -> bool { + assert!(n < 4usize); + let offs = 1usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; + val != 0 } - #[doc = "USB1OTG peripheral clock enable during CSleep mode"] - pub fn set_usb1otglpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) { - self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize); + #[doc = "Capture/compare 1 generation"] + pub fn set_ccg(&mut self, n: usize, val: bool) { + assert!(n < 4usize); + let offs = 1usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "USB_PHY1 clock enable during CSleep mode"] - pub const fn usb1otghsulpilpen(&self) -> super::vals::Ahb1lpenrDma1lpen { - let val = (self.0 >> 26usize) & 0x01; - super::vals::Ahb1lpenrDma1lpen(val as u8) + #[doc = "Capture/Compare control update generation"] + pub const fn comg(&self) -> bool { + let val = (self.0 >> 5usize) & 0x01; + val != 0 } - #[doc = "USB_PHY1 clock enable during CSleep mode"] - pub fn set_usb1otghsulpilpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) { - self.0 = (self.0 & !(0x01 << 26usize)) | (((val.0 as u32) & 0x01) << 26usize); + #[doc = "Capture/Compare control update generation"] + pub fn set_comg(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); } - #[doc = "USB2OTG peripheral clock enable during CSleep mode"] - pub const fn usb2otglpen(&self) -> super::vals::Ahb1lpenrDma1lpen { - let val = (self.0 >> 27usize) & 0x01; - super::vals::Ahb1lpenrDma1lpen(val as u8) + #[doc = "Trigger generation"] + pub const fn tg(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 } - #[doc = "USB2OTG peripheral clock enable during CSleep mode"] - pub fn set_usb2otglpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) { - self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize); + #[doc = "Trigger generation"] + pub fn set_tg(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - #[doc = "USB_PHY2 clocks enable during CSleep mode"] - pub const fn usb2otghsulpilpen(&self) -> super::vals::Ahb1lpenrDma1lpen { - let val = (self.0 >> 28usize) & 0x01; - super::vals::Ahb1lpenrDma1lpen(val as u8) + #[doc = "Break generation"] + pub const fn bg(&self) -> bool { + let val = (self.0 >> 7usize) & 0x01; + val != 0 } - #[doc = "USB_PHY2 clocks enable during CSleep mode"] - pub fn set_usb2otghsulpilpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) { - self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); + #[doc = "Break generation"] + pub fn set_bg(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); } } - impl Default for Ahb1lpenr { - fn default() -> Ahb1lpenr { - Ahb1lpenr(0) + impl Default for EgrGp { + fn default() -> EgrGp { + EgrGp(0) } } - #[doc = "RCC APB3 Clock Register"] + } + pub mod vals { + use crate::generic::*; #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct C1Apb3enr(pub u32); - impl C1Apb3enr { - #[doc = "LTDC peripheral clock enable"] - pub const fn ltdcen(&self) -> super::vals::C1Apb3enrLtdcen { - let val = (self.0 >> 3usize) & 0x01; - super::vals::C1Apb3enrLtdcen(val as u8) - } - #[doc = "LTDC peripheral clock enable"] - pub fn set_ltdcen(&mut self, val: super::vals::C1Apb3enrLtdcen) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); - } - #[doc = "WWDG1 Clock Enable"] - pub const fn wwdg1en(&self) -> super::vals::C1Apb3enrLtdcen { - let val = (self.0 >> 6usize) & 0x01; - super::vals::C1Apb3enrLtdcen(val as u8) - } - #[doc = "WWDG1 Clock Enable"] - pub fn set_wwdg1en(&mut self, val: super::vals::C1Apb3enrLtdcen) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); - } - } - impl Default for C1Apb3enr { - fn default() -> C1Apb3enr { - C1Apb3enr(0) - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Opm(pub u8); + impl Opm { + #[doc = "Counter is not stopped at update event"] + pub const DISABLED: Self = Self(0); + #[doc = "Counter stops counting at the next update event (clearing the CEN bit)"] + pub const ENABLED: Self = Self(0x01); } - #[doc = "RCC PLL2 Dividers Configuration Register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Pll2divr(pub u32); - impl Pll2divr { - #[doc = "Multiplication factor for PLL1 VCO"] - pub const fn divn2(&self) -> u16 { - let val = (self.0 >> 0usize) & 0x01ff; - val as u16 - } - #[doc = "Multiplication factor for PLL1 VCO"] - pub fn set_divn2(&mut self, val: u16) { - self.0 = (self.0 & !(0x01ff << 0usize)) | (((val as u32) & 0x01ff) << 0usize); - } - #[doc = "PLL1 DIVP division factor"] - pub const fn divp2(&self) -> u8 { - let val = (self.0 >> 9usize) & 0x7f; - val as u8 - } - #[doc = "PLL1 DIVP division factor"] - pub fn set_divp2(&mut self, val: u8) { - self.0 = (self.0 & !(0x7f << 9usize)) | (((val as u32) & 0x7f) << 9usize); - } - #[doc = "PLL1 DIVQ division factor"] - pub const fn divq2(&self) -> u8 { - let val = (self.0 >> 16usize) & 0x7f; - val as u8 - } - #[doc = "PLL1 DIVQ division factor"] - pub fn set_divq2(&mut self, val: u8) { - self.0 = (self.0 & !(0x7f << 16usize)) | (((val as u32) & 0x7f) << 16usize); - } - #[doc = "PLL1 DIVR division factor"] - pub const fn divr2(&self) -> u8 { - let val = (self.0 >> 24usize) & 0x7f; - val as u8 - } - #[doc = "PLL1 DIVR division factor"] - pub fn set_divr2(&mut self, val: u8) { - self.0 = (self.0 & !(0x7f << 24usize)) | (((val as u32) & 0x7f) << 24usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Etf(pub u8); + impl Etf { + #[doc = "No filter, sampling is done at fDTS"] + pub const NOFILTER: Self = Self(0); + #[doc = "fSAMPLING=fCK_INT, N=2"] + pub const FCK_INT_N2: Self = Self(0x01); + #[doc = "fSAMPLING=fCK_INT, N=4"] + pub const FCK_INT_N4: Self = Self(0x02); + #[doc = "fSAMPLING=fCK_INT, N=8"] + pub const FCK_INT_N8: Self = Self(0x03); + #[doc = "fSAMPLING=fDTS/2, N=6"] + pub const FDTS_DIV2_N6: Self = Self(0x04); + #[doc = "fSAMPLING=fDTS/2, N=8"] + pub const FDTS_DIV2_N8: Self = Self(0x05); + #[doc = "fSAMPLING=fDTS/4, N=6"] + pub const FDTS_DIV4_N6: Self = Self(0x06); + #[doc = "fSAMPLING=fDTS/4, N=8"] + pub const FDTS_DIV4_N8: Self = Self(0x07); + #[doc = "fSAMPLING=fDTS/8, N=6"] + pub const FDTS_DIV8_N6: Self = Self(0x08); + #[doc = "fSAMPLING=fDTS/8, N=8"] + pub const FDTS_DIV8_N8: Self = Self(0x09); + #[doc = "fSAMPLING=fDTS/16, N=5"] + pub const FDTS_DIV16_N5: Self = Self(0x0a); + #[doc = "fSAMPLING=fDTS/16, N=6"] + pub const FDTS_DIV16_N6: Self = Self(0x0b); + #[doc = "fSAMPLING=fDTS/16, N=8"] + pub const FDTS_DIV16_N8: Self = Self(0x0c); + #[doc = "fSAMPLING=fDTS/32, N=5"] + pub const FDTS_DIV32_N5: Self = Self(0x0d); + #[doc = "fSAMPLING=fDTS/32, N=6"] + pub const FDTS_DIV32_N6: Self = Self(0x0e); + #[doc = "fSAMPLING=fDTS/32, N=8"] + pub const FDTS_DIV32_N8: Self = Self(0x0f); } - impl Default for Pll2divr { - fn default() -> Pll2divr { - Pll2divr(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Ocm(pub u8); + impl Ocm { + #[doc = "The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs"] + pub const FROZEN: Self = Self(0); + #[doc = "Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register"] + pub const ACTIVEONMATCH: Self = Self(0x01); + #[doc = "Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register"] + pub const INACTIVEONMATCH: Self = Self(0x02); + #[doc = "OCyREF toggles when TIMx_CNT=TIMx_CCRy"] + pub const TOGGLE: Self = Self(0x03); + #[doc = "OCyREF is forced low"] + pub const FORCEINACTIVE: Self = Self(0x04); + #[doc = "OCyREF is forced high"] + pub const FORCEACTIVE: Self = Self(0x05); + #[doc = "In upcounting, channel is active as long as TIMx_CNTTIMx_CCRy else active"] + pub const PWMMODE1: Self = Self(0x06); + #[doc = "Inversely to PwmMode1"] + pub const PWMMODE2: Self = Self(0x07); } - #[doc = "RCC APB1 High Sleep Clock Register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct C1Apb1hlpenr(pub u32); - impl C1Apb1hlpenr { - #[doc = "Clock Recovery System peripheral clock enable during CSleep mode"] - pub const fn crslpen(&self) -> super::vals::C1Apb1hlpenrCrslpen { - let val = (self.0 >> 1usize) & 0x01; - super::vals::C1Apb1hlpenrCrslpen(val as u8) - } - #[doc = "Clock Recovery System peripheral clock enable during CSleep mode"] - pub fn set_crslpen(&mut self, val: super::vals::C1Apb1hlpenrCrslpen) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); - } - #[doc = "SWPMI Peripheral Clocks Enable During CSleep Mode"] - pub const fn swplpen(&self) -> super::vals::C1Apb1hlpenrCrslpen { - let val = (self.0 >> 2usize) & 0x01; - super::vals::C1Apb1hlpenrCrslpen(val as u8) - } - #[doc = "SWPMI Peripheral Clocks Enable During CSleep Mode"] - pub fn set_swplpen(&mut self, val: super::vals::C1Apb1hlpenrCrslpen) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); - } - #[doc = "OPAMP peripheral clock enable during CSleep mode"] - pub const fn opamplpen(&self) -> super::vals::C1Apb1hlpenrCrslpen { - let val = (self.0 >> 4usize) & 0x01; - super::vals::C1Apb1hlpenrCrslpen(val as u8) - } - #[doc = "OPAMP peripheral clock enable during CSleep mode"] - pub fn set_opamplpen(&mut self, val: super::vals::C1Apb1hlpenrCrslpen) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); - } - #[doc = "MDIOS peripheral clock enable during CSleep mode"] - pub const fn mdioslpen(&self) -> super::vals::C1Apb1hlpenrCrslpen { - let val = (self.0 >> 5usize) & 0x01; - super::vals::C1Apb1hlpenrCrslpen(val as u8) - } - #[doc = "MDIOS peripheral clock enable during CSleep mode"] - pub fn set_mdioslpen(&mut self, val: super::vals::C1Apb1hlpenrCrslpen) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); - } - #[doc = "FDCAN Peripheral Clocks Enable During CSleep Mode"] - pub const fn fdcanlpen(&self) -> super::vals::C1Apb1hlpenrCrslpen { - let val = (self.0 >> 8usize) & 0x01; - super::vals::C1Apb1hlpenrCrslpen(val as u8) - } - #[doc = "FDCAN Peripheral Clocks Enable During CSleep Mode"] - pub fn set_fdcanlpen(&mut self, val: super::vals::C1Apb1hlpenrCrslpen) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Icf(pub u8); + impl Icf { + #[doc = "No filter, sampling is done at fDTS"] + pub const NOFILTER: Self = Self(0); + #[doc = "fSAMPLING=fCK_INT, N=2"] + pub const FCK_INT_N2: Self = Self(0x01); + #[doc = "fSAMPLING=fCK_INT, N=4"] + pub const FCK_INT_N4: Self = Self(0x02); + #[doc = "fSAMPLING=fCK_INT, N=8"] + pub const FCK_INT_N8: Self = Self(0x03); + #[doc = "fSAMPLING=fDTS/2, N=6"] + pub const FDTS_DIV2_N6: Self = Self(0x04); + #[doc = "fSAMPLING=fDTS/2, N=8"] + pub const FDTS_DIV2_N8: Self = Self(0x05); + #[doc = "fSAMPLING=fDTS/4, N=6"] + pub const FDTS_DIV4_N6: Self = Self(0x06); + #[doc = "fSAMPLING=fDTS/4, N=8"] + pub const FDTS_DIV4_N8: Self = Self(0x07); + #[doc = "fSAMPLING=fDTS/8, N=6"] + pub const FDTS_DIV8_N6: Self = Self(0x08); + #[doc = "fSAMPLING=fDTS/8, N=8"] + pub const FDTS_DIV8_N8: Self = Self(0x09); + #[doc = "fSAMPLING=fDTS/16, N=5"] + pub const FDTS_DIV16_N5: Self = Self(0x0a); + #[doc = "fSAMPLING=fDTS/16, N=6"] + pub const FDTS_DIV16_N6: Self = Self(0x0b); + #[doc = "fSAMPLING=fDTS/16, N=8"] + pub const FDTS_DIV16_N8: Self = Self(0x0c); + #[doc = "fSAMPLING=fDTS/32, N=5"] + pub const FDTS_DIV32_N5: Self = Self(0x0d); + #[doc = "fSAMPLING=fDTS/32, N=6"] + pub const FDTS_DIV32_N6: Self = Self(0x0e); + #[doc = "fSAMPLING=fDTS/32, N=8"] + pub const FDTS_DIV32_N8: Self = Self(0x0f); } - impl Default for C1Apb1hlpenr { - fn default() -> C1Apb1hlpenr { - C1Apb1hlpenr(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Cms(pub u8); + impl Cms { + #[doc = "The counter counts up or down depending on the direction bit"] + pub const EDGEALIGNED: Self = Self(0); + #[doc = "The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting down."] + pub const CENTERALIGNED1: Self = Self(0x01); + #[doc = "The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting up."] + pub const CENTERALIGNED2: Self = Self(0x02); + #[doc = "The counter counts up and down alternatively. Output compare interrupt flags are set both when the counter is counting up or down."] + pub const CENTERALIGNED3: Self = Self(0x03); } - #[doc = "RCC APB1 Clock Register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct C1Apb1lenr(pub u32); - impl C1Apb1lenr { - #[doc = "TIM peripheral clock enable"] - pub const fn tim2en(&self) -> super::vals::C1Apb1lenrTim2en { - let val = (self.0 >> 0usize) & 0x01; - super::vals::C1Apb1lenrTim2en(val as u8) - } - #[doc = "TIM peripheral clock enable"] - pub fn set_tim2en(&mut self, val: super::vals::C1Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); - } - #[doc = "TIM peripheral clock enable"] - pub const fn tim3en(&self) -> super::vals::C1Apb1lenrTim2en { - let val = (self.0 >> 1usize) & 0x01; - super::vals::C1Apb1lenrTim2en(val as u8) - } - #[doc = "TIM peripheral clock enable"] - pub fn set_tim3en(&mut self, val: super::vals::C1Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); - } - #[doc = "TIM peripheral clock enable"] - pub const fn tim4en(&self) -> super::vals::C1Apb1lenrTim2en { - let val = (self.0 >> 2usize) & 0x01; - super::vals::C1Apb1lenrTim2en(val as u8) - } - #[doc = "TIM peripheral clock enable"] - pub fn set_tim4en(&mut self, val: super::vals::C1Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); - } - #[doc = "TIM peripheral clock enable"] - pub const fn tim5en(&self) -> super::vals::C1Apb1lenrTim2en { - let val = (self.0 >> 3usize) & 0x01; - super::vals::C1Apb1lenrTim2en(val as u8) - } - #[doc = "TIM peripheral clock enable"] - pub fn set_tim5en(&mut self, val: super::vals::C1Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); - } - #[doc = "TIM peripheral clock enable"] - pub const fn tim6en(&self) -> super::vals::C1Apb1lenrTim2en { - let val = (self.0 >> 4usize) & 0x01; - super::vals::C1Apb1lenrTim2en(val as u8) - } - #[doc = "TIM peripheral clock enable"] - pub fn set_tim6en(&mut self, val: super::vals::C1Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); - } - #[doc = "TIM peripheral clock enable"] - pub const fn tim7en(&self) -> super::vals::C1Apb1lenrTim2en { - let val = (self.0 >> 5usize) & 0x01; - super::vals::C1Apb1lenrTim2en(val as u8) - } - #[doc = "TIM peripheral clock enable"] - pub fn set_tim7en(&mut self, val: super::vals::C1Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); - } - #[doc = "TIM peripheral clock enable"] - pub const fn tim12en(&self) -> super::vals::C1Apb1lenrTim2en { - let val = (self.0 >> 6usize) & 0x01; - super::vals::C1Apb1lenrTim2en(val as u8) - } - #[doc = "TIM peripheral clock enable"] - pub fn set_tim12en(&mut self, val: super::vals::C1Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); - } - #[doc = "TIM peripheral clock enable"] - pub const fn tim13en(&self) -> super::vals::C1Apb1lenrTim2en { - let val = (self.0 >> 7usize) & 0x01; - super::vals::C1Apb1lenrTim2en(val as u8) - } - #[doc = "TIM peripheral clock enable"] - pub fn set_tim13en(&mut self, val: super::vals::C1Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); - } - #[doc = "TIM peripheral clock enable"] - pub const fn tim14en(&self) -> super::vals::C1Apb1lenrTim2en { - let val = (self.0 >> 8usize) & 0x01; - super::vals::C1Apb1lenrTim2en(val as u8) - } - #[doc = "TIM peripheral clock enable"] - pub fn set_tim14en(&mut self, val: super::vals::C1Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); - } - #[doc = "LPTIM1 Peripheral Clocks Enable"] - pub const fn lptim1en(&self) -> super::vals::C1Apb1lenrTim2en { - let val = (self.0 >> 9usize) & 0x01; - super::vals::C1Apb1lenrTim2en(val as u8) - } - #[doc = "LPTIM1 Peripheral Clocks Enable"] - pub fn set_lptim1en(&mut self, val: super::vals::C1Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); - } - #[doc = "SPI2 Peripheral Clocks Enable"] - pub const fn spi2en(&self) -> super::vals::C1Apb1lenrTim2en { - let val = (self.0 >> 14usize) & 0x01; - super::vals::C1Apb1lenrTim2en(val as u8) - } - #[doc = "SPI2 Peripheral Clocks Enable"] - pub fn set_spi2en(&mut self, val: super::vals::C1Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); - } - #[doc = "SPI3 Peripheral Clocks Enable"] - pub const fn spi3en(&self) -> super::vals::C1Apb1lenrTim2en { - let val = (self.0 >> 15usize) & 0x01; - super::vals::C1Apb1lenrTim2en(val as u8) - } - #[doc = "SPI3 Peripheral Clocks Enable"] - pub fn set_spi3en(&mut self, val: super::vals::C1Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); - } - #[doc = "SPDIFRX Peripheral Clocks Enable"] - pub const fn spdifrxen(&self) -> super::vals::C1Apb1lenrTim2en { - let val = (self.0 >> 16usize) & 0x01; - super::vals::C1Apb1lenrTim2en(val as u8) - } - #[doc = "SPDIFRX Peripheral Clocks Enable"] - pub fn set_spdifrxen(&mut self, val: super::vals::C1Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); - } - #[doc = "USART2 Peripheral Clocks Enable"] - pub const fn usart2en(&self) -> super::vals::C1Apb1lenrTim2en { - let val = (self.0 >> 17usize) & 0x01; - super::vals::C1Apb1lenrTim2en(val as u8) - } - #[doc = "USART2 Peripheral Clocks Enable"] - pub fn set_usart2en(&mut self, val: super::vals::C1Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); - } - #[doc = "USART3 Peripheral Clocks Enable"] - pub const fn usart3en(&self) -> super::vals::C1Apb1lenrTim2en { - let val = (self.0 >> 18usize) & 0x01; - super::vals::C1Apb1lenrTim2en(val as u8) - } - #[doc = "USART3 Peripheral Clocks Enable"] - pub fn set_usart3en(&mut self, val: super::vals::C1Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); - } - #[doc = "UART4 Peripheral Clocks Enable"] - pub const fn uart4en(&self) -> super::vals::C1Apb1lenrTim2en { - let val = (self.0 >> 19usize) & 0x01; - super::vals::C1Apb1lenrTim2en(val as u8) - } - #[doc = "UART4 Peripheral Clocks Enable"] - pub fn set_uart4en(&mut self, val: super::vals::C1Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); - } - #[doc = "UART5 Peripheral Clocks Enable"] - pub const fn uart5en(&self) -> super::vals::C1Apb1lenrTim2en { - let val = (self.0 >> 20usize) & 0x01; - super::vals::C1Apb1lenrTim2en(val as u8) - } - #[doc = "UART5 Peripheral Clocks Enable"] - pub fn set_uart5en(&mut self, val: super::vals::C1Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize); - } - #[doc = "I2C1 Peripheral Clocks Enable"] - pub const fn i2c1en(&self) -> super::vals::C1Apb1lenrTim2en { - let val = (self.0 >> 21usize) & 0x01; - super::vals::C1Apb1lenrTim2en(val as u8) - } - #[doc = "I2C1 Peripheral Clocks Enable"] - pub fn set_i2c1en(&mut self, val: super::vals::C1Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); - } - #[doc = "I2C2 Peripheral Clocks Enable"] - pub const fn i2c2en(&self) -> super::vals::C1Apb1lenrTim2en { - let val = (self.0 >> 22usize) & 0x01; - super::vals::C1Apb1lenrTim2en(val as u8) - } - #[doc = "I2C2 Peripheral Clocks Enable"] - pub fn set_i2c2en(&mut self, val: super::vals::C1Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); - } - #[doc = "I2C3 Peripheral Clocks Enable"] - pub const fn i2c3en(&self) -> super::vals::C1Apb1lenrTim2en { - let val = (self.0 >> 23usize) & 0x01; - super::vals::C1Apb1lenrTim2en(val as u8) - } - #[doc = "I2C3 Peripheral Clocks Enable"] - pub fn set_i2c3en(&mut self, val: super::vals::C1Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize); - } - #[doc = "HDMI-CEC peripheral clock enable"] - pub const fn cecen(&self) -> super::vals::C1Apb1lenrTim2en { - let val = (self.0 >> 27usize) & 0x01; - super::vals::C1Apb1lenrTim2en(val as u8) - } - #[doc = "HDMI-CEC peripheral clock enable"] - pub fn set_cecen(&mut self, val: super::vals::C1Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize); - } - #[doc = "DAC1&2 peripheral clock enable"] - pub const fn dac12en(&self) -> super::vals::C1Apb1lenrTim2en { - let val = (self.0 >> 29usize) & 0x01; - super::vals::C1Apb1lenrTim2en(val as u8) - } - #[doc = "DAC1&2 peripheral clock enable"] - pub fn set_dac12en(&mut self, val: super::vals::C1Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); - } - #[doc = "UART7 Peripheral Clocks Enable"] - pub const fn uart7en(&self) -> super::vals::C1Apb1lenrTim2en { - let val = (self.0 >> 30usize) & 0x01; - super::vals::C1Apb1lenrTim2en(val as u8) - } - #[doc = "UART7 Peripheral Clocks Enable"] - pub fn set_uart7en(&mut self, val: super::vals::C1Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize); - } - #[doc = "UART8 Peripheral Clocks Enable"] - pub const fn uart8en(&self) -> super::vals::C1Apb1lenrTim2en { - let val = (self.0 >> 31usize) & 0x01; - super::vals::C1Apb1lenrTim2en(val as u8) - } - #[doc = "UART8 Peripheral Clocks Enable"] - pub fn set_uart8en(&mut self, val: super::vals::C1Apb1lenrTim2en) { - self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Dir(pub u8); + impl Dir { + #[doc = "Counter used as upcounter"] + pub const UP: Self = Self(0); + #[doc = "Counter used as downcounter"] + pub const DOWN: Self = Self(0x01); } - impl Default for C1Apb1lenr { - fn default() -> C1Apb1lenr { - C1Apb1lenr(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Ocpe(pub u8); + impl Ocpe { + #[doc = "Preload register on CCR2 disabled. New values written to CCR2 are taken into account immediately"] + pub const DISABLED: Self = Self(0); + #[doc = "Preload register on CCR2 enabled. Preload value is loaded into active register on each update event"] + pub const ENABLED: Self = Self(0x01); } - #[doc = "RCC APB1 Low Sleep Clock Register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Apb1llpenr(pub u32); - impl Apb1llpenr { - #[doc = "TIM2 peripheral clock enable during CSleep mode"] - pub const fn tim2lpen(&self) -> super::vals::Apb1llpenrTim2lpen { - let val = (self.0 >> 0usize) & 0x01; - super::vals::Apb1llpenrTim2lpen(val as u8) - } - #[doc = "TIM2 peripheral clock enable during CSleep mode"] - pub fn set_tim2lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); - } - #[doc = "TIM3 peripheral clock enable during CSleep mode"] - pub const fn tim3lpen(&self) -> super::vals::Apb1llpenrTim2lpen { - let val = (self.0 >> 1usize) & 0x01; - super::vals::Apb1llpenrTim2lpen(val as u8) - } - #[doc = "TIM3 peripheral clock enable during CSleep mode"] - pub fn set_tim3lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); - } - #[doc = "TIM4 peripheral clock enable during CSleep mode"] - pub const fn tim4lpen(&self) -> super::vals::Apb1llpenrTim2lpen { - let val = (self.0 >> 2usize) & 0x01; - super::vals::Apb1llpenrTim2lpen(val as u8) - } - #[doc = "TIM4 peripheral clock enable during CSleep mode"] - pub fn set_tim4lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); - } - #[doc = "TIM5 peripheral clock enable during CSleep mode"] - pub const fn tim5lpen(&self) -> super::vals::Apb1llpenrTim2lpen { - let val = (self.0 >> 3usize) & 0x01; - super::vals::Apb1llpenrTim2lpen(val as u8) - } - #[doc = "TIM5 peripheral clock enable during CSleep mode"] - pub fn set_tim5lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); - } - #[doc = "TIM6 peripheral clock enable during CSleep mode"] - pub const fn tim6lpen(&self) -> super::vals::Apb1llpenrTim2lpen { - let val = (self.0 >> 4usize) & 0x01; - super::vals::Apb1llpenrTim2lpen(val as u8) - } - #[doc = "TIM6 peripheral clock enable during CSleep mode"] - pub fn set_tim6lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); - } - #[doc = "TIM7 peripheral clock enable during CSleep mode"] - pub const fn tim7lpen(&self) -> super::vals::Apb1llpenrTim2lpen { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Apb1llpenrTim2lpen(val as u8) - } - #[doc = "TIM7 peripheral clock enable during CSleep mode"] - pub fn set_tim7lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); - } - #[doc = "TIM12 peripheral clock enable during CSleep mode"] - pub const fn tim12lpen(&self) -> super::vals::Apb1llpenrTim2lpen { - let val = (self.0 >> 6usize) & 0x01; - super::vals::Apb1llpenrTim2lpen(val as u8) - } - #[doc = "TIM12 peripheral clock enable during CSleep mode"] - pub fn set_tim12lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); - } - #[doc = "TIM13 peripheral clock enable during CSleep mode"] - pub const fn tim13lpen(&self) -> super::vals::Apb1llpenrTim2lpen { - let val = (self.0 >> 7usize) & 0x01; - super::vals::Apb1llpenrTim2lpen(val as u8) - } - #[doc = "TIM13 peripheral clock enable during CSleep mode"] - pub fn set_tim13lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); - } - #[doc = "TIM14 peripheral clock enable during CSleep mode"] - pub const fn tim14lpen(&self) -> super::vals::Apb1llpenrTim2lpen { - let val = (self.0 >> 8usize) & 0x01; - super::vals::Apb1llpenrTim2lpen(val as u8) - } - #[doc = "TIM14 peripheral clock enable during CSleep mode"] - pub fn set_tim14lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); - } - #[doc = "LPTIM1 Peripheral Clocks Enable During CSleep Mode"] - pub const fn lptim1lpen(&self) -> super::vals::Apb1llpenrTim2lpen { - let val = (self.0 >> 9usize) & 0x01; - super::vals::Apb1llpenrTim2lpen(val as u8) - } - #[doc = "LPTIM1 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_lptim1lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); - } - #[doc = "SPI2 Peripheral Clocks Enable During CSleep Mode"] - pub const fn spi2lpen(&self) -> super::vals::Apb1llpenrTim2lpen { - let val = (self.0 >> 14usize) & 0x01; - super::vals::Apb1llpenrTim2lpen(val as u8) - } - #[doc = "SPI2 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_spi2lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); - } - #[doc = "SPI3 Peripheral Clocks Enable During CSleep Mode"] - pub const fn spi3lpen(&self) -> super::vals::Apb1llpenrTim2lpen { - let val = (self.0 >> 15usize) & 0x01; - super::vals::Apb1llpenrTim2lpen(val as u8) - } - #[doc = "SPI3 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_spi3lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); - } - #[doc = "SPDIFRX Peripheral Clocks Enable During CSleep Mode"] - pub const fn spdifrxlpen(&self) -> super::vals::Apb1llpenrTim2lpen { - let val = (self.0 >> 16usize) & 0x01; - super::vals::Apb1llpenrTim2lpen(val as u8) - } - #[doc = "SPDIFRX Peripheral Clocks Enable During CSleep Mode"] - pub fn set_spdifrxlpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); - } - #[doc = "USART2 Peripheral Clocks Enable During CSleep Mode"] - pub const fn usart2lpen(&self) -> super::vals::Apb1llpenrTim2lpen { - let val = (self.0 >> 17usize) & 0x01; - super::vals::Apb1llpenrTim2lpen(val as u8) - } - #[doc = "USART2 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_usart2lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); - } - #[doc = "USART3 Peripheral Clocks Enable During CSleep Mode"] - pub const fn usart3lpen(&self) -> super::vals::Apb1llpenrTim2lpen { - let val = (self.0 >> 18usize) & 0x01; - super::vals::Apb1llpenrTim2lpen(val as u8) - } - #[doc = "USART3 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_usart3lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); - } - #[doc = "UART4 Peripheral Clocks Enable During CSleep Mode"] - pub const fn uart4lpen(&self) -> super::vals::Apb1llpenrTim2lpen { - let val = (self.0 >> 19usize) & 0x01; - super::vals::Apb1llpenrTim2lpen(val as u8) - } - #[doc = "UART4 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_uart4lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); - } - #[doc = "UART5 Peripheral Clocks Enable During CSleep Mode"] - pub const fn uart5lpen(&self) -> super::vals::Apb1llpenrTim2lpen { - let val = (self.0 >> 20usize) & 0x01; - super::vals::Apb1llpenrTim2lpen(val as u8) - } - #[doc = "UART5 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_uart5lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize); - } - #[doc = "I2C1 Peripheral Clocks Enable During CSleep Mode"] - pub const fn i2c1lpen(&self) -> super::vals::Apb1llpenrTim2lpen { - let val = (self.0 >> 21usize) & 0x01; - super::vals::Apb1llpenrTim2lpen(val as u8) - } - #[doc = "I2C1 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_i2c1lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); - } - #[doc = "I2C2 Peripheral Clocks Enable During CSleep Mode"] - pub const fn i2c2lpen(&self) -> super::vals::Apb1llpenrTim2lpen { - let val = (self.0 >> 22usize) & 0x01; - super::vals::Apb1llpenrTim2lpen(val as u8) - } - #[doc = "I2C2 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_i2c2lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); - } - #[doc = "I2C3 Peripheral Clocks Enable During CSleep Mode"] - pub const fn i2c3lpen(&self) -> super::vals::Apb1llpenrTim2lpen { - let val = (self.0 >> 23usize) & 0x01; - super::vals::Apb1llpenrTim2lpen(val as u8) - } - #[doc = "I2C3 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_i2c3lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize); - } - #[doc = "HDMI-CEC Peripheral Clocks Enable During CSleep Mode"] - pub const fn ceclpen(&self) -> super::vals::Apb1llpenrTim2lpen { - let val = (self.0 >> 27usize) & 0x01; - super::vals::Apb1llpenrTim2lpen(val as u8) - } - #[doc = "HDMI-CEC Peripheral Clocks Enable During CSleep Mode"] - pub fn set_ceclpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize); - } - #[doc = "DAC1/2 peripheral clock enable during CSleep mode"] - pub const fn dac12lpen(&self) -> super::vals::Apb1llpenrTim2lpen { - let val = (self.0 >> 29usize) & 0x01; - super::vals::Apb1llpenrTim2lpen(val as u8) - } - #[doc = "DAC1/2 peripheral clock enable during CSleep mode"] - pub fn set_dac12lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); - } - #[doc = "UART7 Peripheral Clocks Enable During CSleep Mode"] - pub const fn uart7lpen(&self) -> super::vals::Apb1llpenrTim2lpen { - let val = (self.0 >> 30usize) & 0x01; - super::vals::Apb1llpenrTim2lpen(val as u8) - } - #[doc = "UART7 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_uart7lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize); - } - #[doc = "UART8 Peripheral Clocks Enable During CSleep Mode"] - pub const fn uart8lpen(&self) -> super::vals::Apb1llpenrTim2lpen { - let val = (self.0 >> 31usize) & 0x01; - super::vals::Apb1llpenrTim2lpen(val as u8) - } - #[doc = "UART8 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_uart8lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Ts(pub u8); + impl Ts { + #[doc = "Internal Trigger 0 (ITR0)"] + pub const ITR0: Self = Self(0); + #[doc = "Internal Trigger 1 (ITR1)"] + pub const ITR1: Self = Self(0x01); + #[doc = "Internal Trigger 2 (ITR2)"] + pub const ITR2: Self = Self(0x02); + #[doc = "TI1 Edge Detector (TI1F_ED)"] + pub const TI1F_ED: Self = Self(0x04); + #[doc = "Filtered Timer Input 1 (TI1FP1)"] + pub const TI1FP1: Self = Self(0x05); + #[doc = "Filtered Timer Input 2 (TI2FP2)"] + pub const TI2FP2: Self = Self(0x06); + #[doc = "External Trigger input (ETRF)"] + pub const ETRF: Self = Self(0x07); } - impl Default for Apb1llpenr { - fn default() -> Apb1llpenr { - Apb1llpenr(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Mms(pub u8); + impl Mms { + #[doc = "The UG bit from the TIMx_EGR register is used as trigger output"] + pub const RESET: Self = Self(0); + #[doc = "The counter enable signal, CNT_EN, is used as trigger output"] + pub const ENABLE: Self = Self(0x01); + #[doc = "The update event is selected as trigger output"] + pub const UPDATE: Self = Self(0x02); + #[doc = "The trigger output send a positive pulse when the CC1IF flag it to be set, as soon as a capture or a compare match occurred"] + pub const COMPAREPULSE: Self = Self(0x03); + #[doc = "OC1REF signal is used as trigger output"] + pub const COMPAREOC1: Self = Self(0x04); + #[doc = "OC2REF signal is used as trigger output"] + pub const COMPAREOC2: Self = Self(0x05); + #[doc = "OC3REF signal is used as trigger output"] + pub const COMPAREOC3: Self = Self(0x06); + #[doc = "OC4REF signal is used as trigger output"] + pub const COMPAREOC4: Self = Self(0x07); } - #[doc = "RCC PLL3 Fractional Divider Register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Pll3fracr(pub u32); - impl Pll3fracr { - #[doc = "Fractional part of the multiplication factor for PLL3 VCO"] - pub const fn fracn3(&self) -> u16 { - let val = (self.0 >> 3usize) & 0x1fff; - val as u16 - } - #[doc = "Fractional part of the multiplication factor for PLL3 VCO"] - pub fn set_fracn3(&mut self, val: u16) { - self.0 = (self.0 & !(0x1fff << 3usize)) | (((val as u32) & 0x1fff) << 3usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Urs(pub u8); + impl Urs { + #[doc = "Any of counter overflow/underflow, setting UG, or update through slave mode, generates an update interrupt or DMA request"] + pub const ANYEVENT: Self = Self(0); + #[doc = "Only counter overflow/underflow generates an update interrupt or DMA request"] + pub const COUNTERONLY: Self = Self(0x01); } - impl Default for Pll3fracr { - fn default() -> Pll3fracr { - Pll3fracr(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Etps(pub u8); + impl Etps { + #[doc = "Prescaler OFF"] + pub const DIV1: Self = Self(0); + #[doc = "ETRP frequency divided by 2"] + pub const DIV2: Self = Self(0x01); + #[doc = "ETRP frequency divided by 4"] + pub const DIV4: Self = Self(0x02); + #[doc = "ETRP frequency divided by 8"] + pub const DIV8: Self = Self(0x03); } - #[doc = "RCC APB1 Low Sleep Clock Register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct C1Apb1llpenr(pub u32); - impl C1Apb1llpenr { - #[doc = "TIM2 peripheral clock enable during CSleep mode"] - pub const fn tim2lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { - let val = (self.0 >> 0usize) & 0x01; - super::vals::C1Apb1llpenrTim2lpen(val as u8) - } - #[doc = "TIM2 peripheral clock enable during CSleep mode"] - pub fn set_tim2lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); - } - #[doc = "TIM3 peripheral clock enable during CSleep mode"] - pub const fn tim3lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { - let val = (self.0 >> 1usize) & 0x01; - super::vals::C1Apb1llpenrTim2lpen(val as u8) - } - #[doc = "TIM3 peripheral clock enable during CSleep mode"] - pub fn set_tim3lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); - } - #[doc = "TIM4 peripheral clock enable during CSleep mode"] - pub const fn tim4lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { - let val = (self.0 >> 2usize) & 0x01; - super::vals::C1Apb1llpenrTim2lpen(val as u8) - } - #[doc = "TIM4 peripheral clock enable during CSleep mode"] - pub fn set_tim4lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); - } - #[doc = "TIM5 peripheral clock enable during CSleep mode"] - pub const fn tim5lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { - let val = (self.0 >> 3usize) & 0x01; - super::vals::C1Apb1llpenrTim2lpen(val as u8) - } - #[doc = "TIM5 peripheral clock enable during CSleep mode"] - pub fn set_tim5lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); - } - #[doc = "TIM6 peripheral clock enable during CSleep mode"] - pub const fn tim6lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { - let val = (self.0 >> 4usize) & 0x01; - super::vals::C1Apb1llpenrTim2lpen(val as u8) - } - #[doc = "TIM6 peripheral clock enable during CSleep mode"] - pub fn set_tim6lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); - } - #[doc = "TIM7 peripheral clock enable during CSleep mode"] - pub const fn tim7lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { - let val = (self.0 >> 5usize) & 0x01; - super::vals::C1Apb1llpenrTim2lpen(val as u8) - } - #[doc = "TIM7 peripheral clock enable during CSleep mode"] - pub fn set_tim7lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); - } - #[doc = "TIM12 peripheral clock enable during CSleep mode"] - pub const fn tim12lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { - let val = (self.0 >> 6usize) & 0x01; - super::vals::C1Apb1llpenrTim2lpen(val as u8) - } - #[doc = "TIM12 peripheral clock enable during CSleep mode"] - pub fn set_tim12lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); - } - #[doc = "TIM13 peripheral clock enable during CSleep mode"] - pub const fn tim13lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { - let val = (self.0 >> 7usize) & 0x01; - super::vals::C1Apb1llpenrTim2lpen(val as u8) - } - #[doc = "TIM13 peripheral clock enable during CSleep mode"] - pub fn set_tim13lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); - } - #[doc = "TIM14 peripheral clock enable during CSleep mode"] - pub const fn tim14lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { - let val = (self.0 >> 8usize) & 0x01; - super::vals::C1Apb1llpenrTim2lpen(val as u8) - } - #[doc = "TIM14 peripheral clock enable during CSleep mode"] - pub fn set_tim14lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); - } - #[doc = "LPTIM1 Peripheral Clocks Enable During CSleep Mode"] - pub const fn lptim1lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { - let val = (self.0 >> 9usize) & 0x01; - super::vals::C1Apb1llpenrTim2lpen(val as u8) - } - #[doc = "LPTIM1 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_lptim1lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); - } - #[doc = "SPI2 Peripheral Clocks Enable During CSleep Mode"] - pub const fn spi2lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { - let val = (self.0 >> 14usize) & 0x01; - super::vals::C1Apb1llpenrTim2lpen(val as u8) - } - #[doc = "SPI2 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_spi2lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); - } - #[doc = "SPI3 Peripheral Clocks Enable During CSleep Mode"] - pub const fn spi3lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { - let val = (self.0 >> 15usize) & 0x01; - super::vals::C1Apb1llpenrTim2lpen(val as u8) - } - #[doc = "SPI3 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_spi3lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); - } - #[doc = "SPDIFRX Peripheral Clocks Enable During CSleep Mode"] - pub const fn spdifrxlpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { - let val = (self.0 >> 16usize) & 0x01; - super::vals::C1Apb1llpenrTim2lpen(val as u8) - } - #[doc = "SPDIFRX Peripheral Clocks Enable During CSleep Mode"] - pub fn set_spdifrxlpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); - } - #[doc = "USART2 Peripheral Clocks Enable During CSleep Mode"] - pub const fn usart2lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { - let val = (self.0 >> 17usize) & 0x01; - super::vals::C1Apb1llpenrTim2lpen(val as u8) - } - #[doc = "USART2 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_usart2lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); - } - #[doc = "USART3 Peripheral Clocks Enable During CSleep Mode"] - pub const fn usart3lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { - let val = (self.0 >> 18usize) & 0x01; - super::vals::C1Apb1llpenrTim2lpen(val as u8) - } - #[doc = "USART3 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_usart3lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); - } - #[doc = "UART4 Peripheral Clocks Enable During CSleep Mode"] - pub const fn uart4lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { - let val = (self.0 >> 19usize) & 0x01; - super::vals::C1Apb1llpenrTim2lpen(val as u8) - } - #[doc = "UART4 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_uart4lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); - } - #[doc = "UART5 Peripheral Clocks Enable During CSleep Mode"] - pub const fn uart5lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { - let val = (self.0 >> 20usize) & 0x01; - super::vals::C1Apb1llpenrTim2lpen(val as u8) - } - #[doc = "UART5 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_uart5lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize); - } - #[doc = "I2C1 Peripheral Clocks Enable During CSleep Mode"] - pub const fn i2c1lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { - let val = (self.0 >> 21usize) & 0x01; - super::vals::C1Apb1llpenrTim2lpen(val as u8) - } - #[doc = "I2C1 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_i2c1lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); - } - #[doc = "I2C2 Peripheral Clocks Enable During CSleep Mode"] - pub const fn i2c2lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { - let val = (self.0 >> 22usize) & 0x01; - super::vals::C1Apb1llpenrTim2lpen(val as u8) - } - #[doc = "I2C2 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_i2c2lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); - } - #[doc = "I2C3 Peripheral Clocks Enable During CSleep Mode"] - pub const fn i2c3lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { - let val = (self.0 >> 23usize) & 0x01; - super::vals::C1Apb1llpenrTim2lpen(val as u8) - } - #[doc = "I2C3 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_i2c3lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize); - } - #[doc = "HDMI-CEC Peripheral Clocks Enable During CSleep Mode"] - pub const fn ceclpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { - let val = (self.0 >> 27usize) & 0x01; - super::vals::C1Apb1llpenrTim2lpen(val as u8) - } - #[doc = "HDMI-CEC Peripheral Clocks Enable During CSleep Mode"] - pub fn set_ceclpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize); - } - #[doc = "DAC1/2 peripheral clock enable during CSleep mode"] - pub const fn dac12lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { - let val = (self.0 >> 29usize) & 0x01; - super::vals::C1Apb1llpenrTim2lpen(val as u8) - } - #[doc = "DAC1/2 peripheral clock enable during CSleep mode"] - pub fn set_dac12lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); - } - #[doc = "UART7 Peripheral Clocks Enable During CSleep Mode"] - pub const fn uart7lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { - let val = (self.0 >> 30usize) & 0x01; - super::vals::C1Apb1llpenrTim2lpen(val as u8) - } - #[doc = "UART7 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_uart7lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize); - } - #[doc = "UART8 Peripheral Clocks Enable During CSleep Mode"] - pub const fn uart8lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { - let val = (self.0 >> 31usize) & 0x01; - super::vals::C1Apb1llpenrTim2lpen(val as u8) - } - #[doc = "UART8 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_uart8lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { - self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); - } - } - impl Default for C1Apb1llpenr { - fn default() -> C1Apb1llpenr { - C1Apb1llpenr(0) - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Arpe(pub u8); + impl Arpe { + #[doc = "TIMx_APRR register is not buffered"] + pub const DISABLED: Self = Self(0); + #[doc = "TIMx_APRR register is buffered"] + pub const ENABLED: Self = Self(0x01); } - #[doc = "RCC PLL1 Dividers Configuration Register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Pll1divr(pub u32); - impl Pll1divr { - #[doc = "Multiplication factor for PLL1 VCO"] - pub const fn divn1(&self) -> u16 { - let val = (self.0 >> 0usize) & 0x01ff; - val as u16 - } - #[doc = "Multiplication factor for PLL1 VCO"] - pub fn set_divn1(&mut self, val: u16) { - self.0 = (self.0 & !(0x01ff << 0usize)) | (((val as u32) & 0x01ff) << 0usize); - } - #[doc = "PLL1 DIVP division factor"] - pub const fn divp1(&self) -> super::vals::Divp1 { - let val = (self.0 >> 9usize) & 0x7f; - super::vals::Divp1(val as u8) - } - #[doc = "PLL1 DIVP division factor"] - pub fn set_divp1(&mut self, val: super::vals::Divp1) { - self.0 = (self.0 & !(0x7f << 9usize)) | (((val.0 as u32) & 0x7f) << 9usize); - } - #[doc = "PLL1 DIVQ division factor"] - pub const fn divq1(&self) -> u8 { - let val = (self.0 >> 16usize) & 0x7f; - val as u8 - } - #[doc = "PLL1 DIVQ division factor"] - pub fn set_divq1(&mut self, val: u8) { - self.0 = (self.0 & !(0x7f << 16usize)) | (((val as u32) & 0x7f) << 16usize); - } - #[doc = "PLL1 DIVR division factor"] - pub const fn divr1(&self) -> u8 { - let val = (self.0 >> 24usize) & 0x7f; - val as u8 - } - #[doc = "PLL1 DIVR division factor"] - pub fn set_divr1(&mut self, val: u8) { - self.0 = (self.0 & !(0x7f << 24usize)) | (((val as u32) & 0x7f) << 24usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Ossr(pub u8); + impl Ossr { + #[doc = "When inactive, OC/OCN outputs are disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "When inactive, OC/OCN outputs are enabled with their inactive level"] + pub const IDLELEVEL: Self = Self(0x01); } - impl Default for Pll1divr { - fn default() -> Pll1divr { - Pll1divr(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Msm(pub u8); + impl Msm { + #[doc = "No action"] + pub const NOSYNC: Self = Self(0); + #[doc = "The effect of an event on the trigger input (TRGI) is delayed to allow a perfect synchronization between the current timer and its slaves (through TRGO). It is useful if we want to synchronize several timers on a single external event."] + pub const SYNC: Self = Self(0x01); } - #[doc = "RCC Clock Control and Status Register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Csr(pub u32); - impl Csr { - #[doc = "LSI oscillator enable"] - pub const fn lsion(&self) -> super::vals::Lsion { - let val = (self.0 >> 0usize) & 0x01; - super::vals::Lsion(val as u8) - } - #[doc = "LSI oscillator enable"] - pub fn set_lsion(&mut self, val: super::vals::Lsion) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); - } - #[doc = "LSI oscillator ready"] - pub const fn lsirdy(&self) -> bool { - let val = (self.0 >> 1usize) & 0x01; - val != 0 - } - #[doc = "LSI oscillator ready"] - pub fn set_lsirdy(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Sms(pub u8); + impl Sms { + #[doc = "Slave mode disabled - if CEN = ‘1 then the prescaler is clocked directly by the internal clock."] + pub const DISABLED: Self = Self(0); + #[doc = "Encoder mode 1 - Counter counts up/down on TI2FP1 edge depending on TI1FP2 level."] + pub const ENCODER_MODE_1: Self = Self(0x01); + #[doc = "Encoder mode 2 - Counter counts up/down on TI1FP2 edge depending on TI2FP1 level."] + pub const ENCODER_MODE_2: Self = Self(0x02); + #[doc = "Encoder mode 3 - Counter counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input."] + pub const ENCODER_MODE_3: Self = Self(0x03); + #[doc = "Reset Mode - Rising edge of the selected trigger input (TRGI) reinitializes the counter and generates an update of the registers."] + pub const RESET_MODE: Self = Self(0x04); + #[doc = "Gated Mode - The counter clock is enabled when the trigger input (TRGI) is high. The counter stops (but is not reset) as soon as the trigger becomes low. Both start and stop of the counter are controlled."] + pub const GATED_MODE: Self = Self(0x05); + #[doc = "Trigger Mode - The counter starts at a rising edge of the trigger TRGI (but it is not reset). Only the start of the counter is controlled."] + pub const TRIGGER_MODE: Self = Self(0x06); + #[doc = "External Clock Mode 1 - Rising edges of the selected trigger (TRGI) clock the counter."] + pub const EXT_CLOCK_MODE: Self = Self(0x07); } - impl Default for Csr { - fn default() -> Csr { - Csr(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Ossi(pub u8); + impl Ossi { + #[doc = "When inactive, OC/OCN outputs are disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "When inactive, OC/OCN outputs are forced to idle level"] + pub const IDLELEVEL: Self = Self(0x01); } - #[doc = "RCC PLL3 Dividers Configuration Register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Pll3divr(pub u32); - impl Pll3divr { - #[doc = "Multiplication factor for PLL1 VCO"] - pub const fn divn3(&self) -> u16 { - let val = (self.0 >> 0usize) & 0x01ff; - val as u16 - } - #[doc = "Multiplication factor for PLL1 VCO"] - pub fn set_divn3(&mut self, val: u16) { - self.0 = (self.0 & !(0x01ff << 0usize)) | (((val as u32) & 0x01ff) << 0usize); - } - #[doc = "PLL DIVP division factor"] - pub const fn divp3(&self) -> u8 { - let val = (self.0 >> 9usize) & 0x7f; - val as u8 - } - #[doc = "PLL DIVP division factor"] - pub fn set_divp3(&mut self, val: u8) { - self.0 = (self.0 & !(0x7f << 9usize)) | (((val as u32) & 0x7f) << 9usize); - } - #[doc = "PLL DIVQ division factor"] - pub const fn divq3(&self) -> u8 { - let val = (self.0 >> 16usize) & 0x7f; - val as u8 - } - #[doc = "PLL DIVQ division factor"] - pub fn set_divq3(&mut self, val: u8) { - self.0 = (self.0 & !(0x7f << 16usize)) | (((val as u32) & 0x7f) << 16usize); - } - #[doc = "PLL DIVR division factor"] - pub const fn divr3(&self) -> u8 { - let val = (self.0 >> 24usize) & 0x7f; - val as u8 - } - #[doc = "PLL DIVR division factor"] - pub fn set_divr3(&mut self, val: u8) { - self.0 = (self.0 & !(0x7f << 24usize)) | (((val as u32) & 0x7f) << 24usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Tis(pub u8); + impl Tis { + #[doc = "The TIMx_CH1 pin is connected to TI1 input"] + pub const NORMAL: Self = Self(0); + #[doc = "The TIMx_CH1, CH2, CH3 pins are connected to TI1 input"] + pub const XOR: Self = Self(0x01); } - impl Default for Pll3divr { - fn default() -> Pll3divr { - Pll3divr(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Ccds(pub u8); + impl Ccds { + #[doc = "CCx DMA request sent when CCx event occurs"] + pub const ONCOMPARE: Self = Self(0); + #[doc = "CCx DMA request sent when update event occurs"] + pub const ONUPDATE: Self = Self(0x01); } - #[doc = "RCC APB1 High Sleep Clock Register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Apb1hlpenr(pub u32); - impl Apb1hlpenr { - #[doc = "Clock Recovery System peripheral clock enable during CSleep mode"] - pub const fn crslpen(&self) -> super::vals::Apb1hlpenrCrslpen { - let val = (self.0 >> 1usize) & 0x01; - super::vals::Apb1hlpenrCrslpen(val as u8) - } - #[doc = "Clock Recovery System peripheral clock enable during CSleep mode"] - pub fn set_crslpen(&mut self, val: super::vals::Apb1hlpenrCrslpen) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); - } - #[doc = "SWPMI Peripheral Clocks Enable During CSleep Mode"] - pub const fn swplpen(&self) -> super::vals::Apb1hlpenrCrslpen { - let val = (self.0 >> 2usize) & 0x01; - super::vals::Apb1hlpenrCrslpen(val as u8) - } - #[doc = "SWPMI Peripheral Clocks Enable During CSleep Mode"] - pub fn set_swplpen(&mut self, val: super::vals::Apb1hlpenrCrslpen) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); - } - #[doc = "OPAMP peripheral clock enable during CSleep mode"] - pub const fn opamplpen(&self) -> super::vals::Apb1hlpenrCrslpen { - let val = (self.0 >> 4usize) & 0x01; - super::vals::Apb1hlpenrCrslpen(val as u8) - } - #[doc = "OPAMP peripheral clock enable during CSleep mode"] - pub fn set_opamplpen(&mut self, val: super::vals::Apb1hlpenrCrslpen) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); - } - #[doc = "MDIOS peripheral clock enable during CSleep mode"] - pub const fn mdioslpen(&self) -> super::vals::Apb1hlpenrCrslpen { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Apb1hlpenrCrslpen(val as u8) - } - #[doc = "MDIOS peripheral clock enable during CSleep mode"] - pub fn set_mdioslpen(&mut self, val: super::vals::Apb1hlpenrCrslpen) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); - } - #[doc = "FDCAN Peripheral Clocks Enable During CSleep Mode"] - pub const fn fdcanlpen(&self) -> super::vals::Apb1hlpenrCrslpen { - let val = (self.0 >> 8usize) & 0x01; - super::vals::Apb1hlpenrCrslpen(val as u8) - } - #[doc = "FDCAN Peripheral Clocks Enable During CSleep Mode"] - pub fn set_fdcanlpen(&mut self, val: super::vals::Apb1hlpenrCrslpen) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct CcmrOutputCcs(pub u8); + impl CcmrOutputCcs { + #[doc = "CCx channel is configured as output"] + pub const OUTPUT: Self = Self(0); } - impl Default for Apb1hlpenr { - fn default() -> Apb1hlpenr { - Apb1hlpenr(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Ckd(pub u8); + impl Ckd { + #[doc = "t_DTS = t_CK_INT"] + pub const DIV1: Self = Self(0); + #[doc = "t_DTS = 2 × t_CK_INT"] + pub const DIV2: Self = Self(0x01); + #[doc = "t_DTS = 4 × t_CK_INT"] + pub const DIV4: Self = Self(0x02); } - #[doc = "RCC HSI configuration register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Hsicfgr(pub u32); - impl Hsicfgr { - #[doc = "HSI clock calibration"] - pub const fn hsical(&self) -> u16 { - let val = (self.0 >> 0usize) & 0x0fff; - val as u16 - } - #[doc = "HSI clock calibration"] - pub fn set_hsical(&mut self, val: u16) { - self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize); - } - #[doc = "HSI clock trimming"] - pub const fn hsitrim(&self) -> u8 { - let val = (self.0 >> 24usize) & 0x7f; - val as u8 - } - #[doc = "HSI clock trimming"] - pub fn set_hsitrim(&mut self, val: u8) { - self.0 = (self.0 & !(0x7f << 24usize)) | (((val as u32) & 0x7f) << 24usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct CcmrInputCcs(pub u8); + impl CcmrInputCcs { + #[doc = "CCx channel is configured as input, normal mapping: ICx mapped to TIx"] + pub const TI4: Self = Self(0x01); + #[doc = "CCx channel is configured as input, alternate mapping (switches 1 with 2, 3 with 4)"] + pub const TI3: Self = Self(0x02); + #[doc = "CCx channel is configured as input, ICx is mapped on TRC"] + pub const TRC: Self = Self(0x03); } - impl Default for Hsicfgr { - fn default() -> Hsicfgr { - Hsicfgr(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Ece(pub u8); + impl Ece { + #[doc = "External clock mode 2 disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "External clock mode 2 enabled. The counter is clocked by any active edge on the ETRF signal."] + pub const ENABLED: Self = Self(0x01); } - #[doc = "RCC APB2 Clock Register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Apb2enr(pub u32); - impl Apb2enr { - #[doc = "TIM1 peripheral clock enable"] - pub const fn tim1en(&self) -> super::vals::Apb2enrTim1en { - let val = (self.0 >> 0usize) & 0x01; - super::vals::Apb2enrTim1en(val as u8) - } - #[doc = "TIM1 peripheral clock enable"] - pub fn set_tim1en(&mut self, val: super::vals::Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); - } - #[doc = "TIM8 peripheral clock enable"] - pub const fn tim8en(&self) -> super::vals::Apb2enrTim1en { - let val = (self.0 >> 1usize) & 0x01; - super::vals::Apb2enrTim1en(val as u8) - } - #[doc = "TIM8 peripheral clock enable"] - pub fn set_tim8en(&mut self, val: super::vals::Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); - } - #[doc = "USART1 Peripheral Clocks Enable"] - pub const fn usart1en(&self) -> super::vals::Apb2enrTim1en { - let val = (self.0 >> 4usize) & 0x01; - super::vals::Apb2enrTim1en(val as u8) - } - #[doc = "USART1 Peripheral Clocks Enable"] - pub fn set_usart1en(&mut self, val: super::vals::Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); - } - #[doc = "USART6 Peripheral Clocks Enable"] - pub const fn usart6en(&self) -> super::vals::Apb2enrTim1en { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Apb2enrTim1en(val as u8) - } - #[doc = "USART6 Peripheral Clocks Enable"] - pub fn set_usart6en(&mut self, val: super::vals::Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); - } - #[doc = "SPI1 Peripheral Clocks Enable"] - pub const fn spi1en(&self) -> super::vals::Apb2enrTim1en { - let val = (self.0 >> 12usize) & 0x01; - super::vals::Apb2enrTim1en(val as u8) - } - #[doc = "SPI1 Peripheral Clocks Enable"] - pub fn set_spi1en(&mut self, val: super::vals::Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); - } - #[doc = "SPI4 Peripheral Clocks Enable"] - pub const fn spi4en(&self) -> super::vals::Apb2enrTim1en { - let val = (self.0 >> 13usize) & 0x01; - super::vals::Apb2enrTim1en(val as u8) - } - #[doc = "SPI4 Peripheral Clocks Enable"] - pub fn set_spi4en(&mut self, val: super::vals::Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize); - } - #[doc = "TIM15 peripheral clock enable"] - pub const fn tim15en(&self) -> super::vals::Apb2enrTim1en { - let val = (self.0 >> 16usize) & 0x01; - super::vals::Apb2enrTim1en(val as u8) - } - #[doc = "TIM15 peripheral clock enable"] - pub fn set_tim15en(&mut self, val: super::vals::Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); - } - #[doc = "TIM16 peripheral clock enable"] - pub const fn tim16en(&self) -> super::vals::Apb2enrTim1en { - let val = (self.0 >> 17usize) & 0x01; - super::vals::Apb2enrTim1en(val as u8) - } - #[doc = "TIM16 peripheral clock enable"] - pub fn set_tim16en(&mut self, val: super::vals::Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); - } - #[doc = "TIM17 peripheral clock enable"] - pub const fn tim17en(&self) -> super::vals::Apb2enrTim1en { - let val = (self.0 >> 18usize) & 0x01; - super::vals::Apb2enrTim1en(val as u8) - } - #[doc = "TIM17 peripheral clock enable"] - pub fn set_tim17en(&mut self, val: super::vals::Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); - } - #[doc = "SPI5 Peripheral Clocks Enable"] - pub const fn spi5en(&self) -> super::vals::Apb2enrTim1en { - let val = (self.0 >> 20usize) & 0x01; - super::vals::Apb2enrTim1en(val as u8) - } - #[doc = "SPI5 Peripheral Clocks Enable"] - pub fn set_spi5en(&mut self, val: super::vals::Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize); - } - #[doc = "SAI1 Peripheral Clocks Enable"] - pub const fn sai1en(&self) -> super::vals::Apb2enrTim1en { - let val = (self.0 >> 22usize) & 0x01; - super::vals::Apb2enrTim1en(val as u8) - } - #[doc = "SAI1 Peripheral Clocks Enable"] - pub fn set_sai1en(&mut self, val: super::vals::Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); - } - #[doc = "SAI2 Peripheral Clocks Enable"] - pub const fn sai2en(&self) -> super::vals::Apb2enrTim1en { - let val = (self.0 >> 23usize) & 0x01; - super::vals::Apb2enrTim1en(val as u8) - } - #[doc = "SAI2 Peripheral Clocks Enable"] - pub fn set_sai2en(&mut self, val: super::vals::Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize); - } - #[doc = "SAI3 Peripheral Clocks Enable"] - pub const fn sai3en(&self) -> super::vals::Apb2enrTim1en { - let val = (self.0 >> 24usize) & 0x01; - super::vals::Apb2enrTim1en(val as u8) - } - #[doc = "SAI3 Peripheral Clocks Enable"] - pub fn set_sai3en(&mut self, val: super::vals::Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); - } - #[doc = "DFSDM1 Peripheral Clocks Enable"] - pub const fn dfsdm1en(&self) -> super::vals::Apb2enrTim1en { - let val = (self.0 >> 28usize) & 0x01; - super::vals::Apb2enrTim1en(val as u8) - } - #[doc = "DFSDM1 Peripheral Clocks Enable"] - pub fn set_dfsdm1en(&mut self, val: super::vals::Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); - } - #[doc = "HRTIM peripheral clock enable"] - pub const fn hrtimen(&self) -> super::vals::Apb2enrTim1en { - let val = (self.0 >> 29usize) & 0x01; - super::vals::Apb2enrTim1en(val as u8) - } - #[doc = "HRTIM peripheral clock enable"] - pub fn set_hrtimen(&mut self, val: super::vals::Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Etp(pub u8); + impl Etp { + #[doc = "ETR is noninverted, active at high level or rising edge"] + pub const NOTINVERTED: Self = Self(0); + #[doc = "ETR is inverted, active at low level or falling edge"] + pub const INVERTED: Self = Self(0x01); } - impl Default for Apb2enr { - fn default() -> Apb2enr { - Apb2enr(0) - } + } +} +pub mod spi_v2 { + use crate::generic::*; + #[doc = "Serial peripheral interface"] + #[derive(Copy, Clone)] + pub struct Spi(pub *mut u8); + unsafe impl Send for Spi {} + unsafe impl Sync for Spi {} + impl Spi { + #[doc = "control register 1"] + pub fn cr1(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(0usize)) } } - #[doc = "RCC AHB3 Sleep Clock Register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ahb3lpenr(pub u32); - impl Ahb3lpenr { - #[doc = "MDMA Clock Enable During CSleep Mode"] - pub const fn mdmalpen(&self) -> super::vals::Ahb3lpenrMdmalpen { - let val = (self.0 >> 0usize) & 0x01; - super::vals::Ahb3lpenrMdmalpen(val as u8) - } - #[doc = "MDMA Clock Enable During CSleep Mode"] - pub fn set_mdmalpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); - } - #[doc = "DMA2D Clock Enable During CSleep Mode"] - pub const fn dma2dlpen(&self) -> super::vals::Ahb3lpenrMdmalpen { - let val = (self.0 >> 4usize) & 0x01; - super::vals::Ahb3lpenrMdmalpen(val as u8) - } - #[doc = "DMA2D Clock Enable During CSleep Mode"] - pub fn set_dma2dlpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); - } - #[doc = "JPGDEC Clock Enable During CSleep Mode"] - pub const fn jpgdeclpen(&self) -> super::vals::Ahb3lpenrMdmalpen { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Ahb3lpenrMdmalpen(val as u8) - } - #[doc = "JPGDEC Clock Enable During CSleep Mode"] - pub fn set_jpgdeclpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); - } - #[doc = "FLITF Clock Enable During CSleep Mode"] - pub const fn flashlpen(&self) -> super::vals::Ahb3lpenrMdmalpen { - let val = (self.0 >> 8usize) & 0x01; - super::vals::Ahb3lpenrMdmalpen(val as u8) - } - #[doc = "FLITF Clock Enable During CSleep Mode"] - pub fn set_flashlpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); - } - #[doc = "FMC Peripheral Clocks Enable During CSleep Mode"] - pub const fn fmclpen(&self) -> super::vals::Ahb3lpenrMdmalpen { - let val = (self.0 >> 12usize) & 0x01; - super::vals::Ahb3lpenrMdmalpen(val as u8) - } - #[doc = "FMC Peripheral Clocks Enable During CSleep Mode"] - pub fn set_fmclpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); - } - #[doc = "QUADSPI and QUADSPI Delay Clock Enable During CSleep Mode"] - pub const fn qspilpen(&self) -> super::vals::Ahb3lpenrMdmalpen { - let val = (self.0 >> 14usize) & 0x01; - super::vals::Ahb3lpenrMdmalpen(val as u8) - } - #[doc = "QUADSPI and QUADSPI Delay Clock Enable During CSleep Mode"] - pub fn set_qspilpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); - } - #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable During CSleep Mode"] - pub const fn sdmmc1lpen(&self) -> super::vals::Ahb3lpenrMdmalpen { - let val = (self.0 >> 16usize) & 0x01; - super::vals::Ahb3lpenrMdmalpen(val as u8) - } - #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable During CSleep Mode"] - pub fn set_sdmmc1lpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); - } - #[doc = "D1DTCM1 Block Clock Enable During CSleep mode"] - pub const fn d1dtcm1lpen(&self) -> super::vals::Ahb3lpenrMdmalpen { - let val = (self.0 >> 28usize) & 0x01; - super::vals::Ahb3lpenrMdmalpen(val as u8) - } - #[doc = "D1DTCM1 Block Clock Enable During CSleep mode"] - pub fn set_d1dtcm1lpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) { - self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); - } - #[doc = "D1 DTCM2 Block Clock Enable During CSleep mode"] - pub const fn dtcm2lpen(&self) -> super::vals::Ahb3lpenrMdmalpen { - let val = (self.0 >> 29usize) & 0x01; - super::vals::Ahb3lpenrMdmalpen(val as u8) - } - #[doc = "D1 DTCM2 Block Clock Enable During CSleep mode"] - pub fn set_dtcm2lpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) { - self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); - } - #[doc = "D1ITCM Block Clock Enable During CSleep mode"] - pub const fn itcmlpen(&self) -> super::vals::Ahb3lpenrMdmalpen { - let val = (self.0 >> 30usize) & 0x01; - super::vals::Ahb3lpenrMdmalpen(val as u8) - } - #[doc = "D1ITCM Block Clock Enable During CSleep mode"] - pub fn set_itcmlpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) { - self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize); - } - #[doc = "AXISRAM Block Clock Enable During CSleep mode"] - pub const fn axisramlpen(&self) -> super::vals::Ahb3lpenrMdmalpen { - let val = (self.0 >> 31usize) & 0x01; - super::vals::Ahb3lpenrMdmalpen(val as u8) - } - #[doc = "AXISRAM Block Clock Enable During CSleep mode"] - pub fn set_axisramlpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) { - self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); - } + #[doc = "control register 2"] + pub fn cr2(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(4usize)) } } - impl Default for Ahb3lpenr { - fn default() -> Ahb3lpenr { - Ahb3lpenr(0) - } + #[doc = "status register"] + pub fn sr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(8usize)) } } - #[doc = "RCC APB1 Peripheral Reset Register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Apb1lrstr(pub u32); - impl Apb1lrstr { - #[doc = "TIM block reset"] - pub const fn tim2rst(&self) -> super::vals::Tim2rst { - let val = (self.0 >> 0usize) & 0x01; - super::vals::Tim2rst(val as u8) - } - #[doc = "TIM block reset"] - pub fn set_tim2rst(&mut self, val: super::vals::Tim2rst) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); - } - #[doc = "TIM block reset"] - pub const fn tim3rst(&self) -> super::vals::Tim2rst { - let val = (self.0 >> 1usize) & 0x01; - super::vals::Tim2rst(val as u8) - } - #[doc = "TIM block reset"] - pub fn set_tim3rst(&mut self, val: super::vals::Tim2rst) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); - } - #[doc = "TIM block reset"] - pub const fn tim4rst(&self) -> super::vals::Tim2rst { - let val = (self.0 >> 2usize) & 0x01; - super::vals::Tim2rst(val as u8) - } - #[doc = "TIM block reset"] - pub fn set_tim4rst(&mut self, val: super::vals::Tim2rst) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); - } - #[doc = "TIM block reset"] - pub const fn tim5rst(&self) -> super::vals::Tim2rst { - let val = (self.0 >> 3usize) & 0x01; - super::vals::Tim2rst(val as u8) - } - #[doc = "TIM block reset"] - pub fn set_tim5rst(&mut self, val: super::vals::Tim2rst) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); - } - #[doc = "TIM block reset"] - pub const fn tim6rst(&self) -> super::vals::Tim2rst { - let val = (self.0 >> 4usize) & 0x01; - super::vals::Tim2rst(val as u8) - } - #[doc = "TIM block reset"] - pub fn set_tim6rst(&mut self, val: super::vals::Tim2rst) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); - } - #[doc = "TIM block reset"] - pub const fn tim7rst(&self) -> super::vals::Tim2rst { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Tim2rst(val as u8) - } - #[doc = "TIM block reset"] - pub fn set_tim7rst(&mut self, val: super::vals::Tim2rst) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); - } - #[doc = "TIM block reset"] - pub const fn tim12rst(&self) -> super::vals::Tim2rst { - let val = (self.0 >> 6usize) & 0x01; - super::vals::Tim2rst(val as u8) - } - #[doc = "TIM block reset"] - pub fn set_tim12rst(&mut self, val: super::vals::Tim2rst) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); - } - #[doc = "TIM block reset"] - pub const fn tim13rst(&self) -> super::vals::Tim2rst { - let val = (self.0 >> 7usize) & 0x01; - super::vals::Tim2rst(val as u8) - } - #[doc = "TIM block reset"] - pub fn set_tim13rst(&mut self, val: super::vals::Tim2rst) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); - } - #[doc = "TIM block reset"] - pub const fn tim14rst(&self) -> super::vals::Tim2rst { - let val = (self.0 >> 8usize) & 0x01; - super::vals::Tim2rst(val as u8) - } - #[doc = "TIM block reset"] - pub fn set_tim14rst(&mut self, val: super::vals::Tim2rst) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); - } - #[doc = "TIM block reset"] - pub const fn lptim1rst(&self) -> super::vals::Tim2rst { - let val = (self.0 >> 9usize) & 0x01; - super::vals::Tim2rst(val as u8) - } - #[doc = "TIM block reset"] - pub fn set_lptim1rst(&mut self, val: super::vals::Tim2rst) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); - } - #[doc = "SPI2 block reset"] - pub const fn spi2rst(&self) -> super::vals::Tim2rst { - let val = (self.0 >> 14usize) & 0x01; - super::vals::Tim2rst(val as u8) - } - #[doc = "SPI2 block reset"] - pub fn set_spi2rst(&mut self, val: super::vals::Tim2rst) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); - } - #[doc = "SPI3 block reset"] - pub const fn spi3rst(&self) -> super::vals::Tim2rst { - let val = (self.0 >> 15usize) & 0x01; - super::vals::Tim2rst(val as u8) - } - #[doc = "SPI3 block reset"] - pub fn set_spi3rst(&mut self, val: super::vals::Tim2rst) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); - } - #[doc = "SPDIFRX block reset"] - pub const fn spdifrxrst(&self) -> super::vals::Tim2rst { - let val = (self.0 >> 16usize) & 0x01; - super::vals::Tim2rst(val as u8) - } - #[doc = "SPDIFRX block reset"] - pub fn set_spdifrxrst(&mut self, val: super::vals::Tim2rst) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); - } - #[doc = "USART2 block reset"] - pub const fn usart2rst(&self) -> super::vals::Tim2rst { - let val = (self.0 >> 17usize) & 0x01; - super::vals::Tim2rst(val as u8) - } - #[doc = "USART2 block reset"] - pub fn set_usart2rst(&mut self, val: super::vals::Tim2rst) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); - } - #[doc = "USART3 block reset"] - pub const fn usart3rst(&self) -> super::vals::Tim2rst { - let val = (self.0 >> 18usize) & 0x01; - super::vals::Tim2rst(val as u8) - } - #[doc = "USART3 block reset"] - pub fn set_usart3rst(&mut self, val: super::vals::Tim2rst) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); - } - #[doc = "UART4 block reset"] - pub const fn uart4rst(&self) -> super::vals::Tim2rst { - let val = (self.0 >> 19usize) & 0x01; - super::vals::Tim2rst(val as u8) - } - #[doc = "UART4 block reset"] - pub fn set_uart4rst(&mut self, val: super::vals::Tim2rst) { - self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); - } - #[doc = "UART5 block reset"] - pub const fn uart5rst(&self) -> super::vals::Tim2rst { - let val = (self.0 >> 20usize) & 0x01; - super::vals::Tim2rst(val as u8) - } - #[doc = "UART5 block reset"] - pub fn set_uart5rst(&mut self, val: super::vals::Tim2rst) { - self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize); - } - #[doc = "I2C1 block reset"] - pub const fn i2c1rst(&self) -> super::vals::Tim2rst { - let val = (self.0 >> 21usize) & 0x01; - super::vals::Tim2rst(val as u8) - } - #[doc = "I2C1 block reset"] - pub fn set_i2c1rst(&mut self, val: super::vals::Tim2rst) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); - } - #[doc = "I2C2 block reset"] - pub const fn i2c2rst(&self) -> super::vals::Tim2rst { - let val = (self.0 >> 22usize) & 0x01; - super::vals::Tim2rst(val as u8) - } - #[doc = "I2C2 block reset"] - pub fn set_i2c2rst(&mut self, val: super::vals::Tim2rst) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); - } - #[doc = "I2C3 block reset"] - pub const fn i2c3rst(&self) -> super::vals::Tim2rst { - let val = (self.0 >> 23usize) & 0x01; - super::vals::Tim2rst(val as u8) - } - #[doc = "I2C3 block reset"] - pub fn set_i2c3rst(&mut self, val: super::vals::Tim2rst) { - self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize); - } - #[doc = "HDMI-CEC block reset"] - pub const fn cecrst(&self) -> super::vals::Tim2rst { - let val = (self.0 >> 27usize) & 0x01; - super::vals::Tim2rst(val as u8) - } - #[doc = "HDMI-CEC block reset"] - pub fn set_cecrst(&mut self, val: super::vals::Tim2rst) { - self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize); - } - #[doc = "DAC1 and 2 Blocks Reset"] - pub const fn dac12rst(&self) -> super::vals::Tim2rst { - let val = (self.0 >> 29usize) & 0x01; - super::vals::Tim2rst(val as u8) - } - #[doc = "DAC1 and 2 Blocks Reset"] - pub fn set_dac12rst(&mut self, val: super::vals::Tim2rst) { - self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); - } - #[doc = "UART7 block reset"] - pub const fn uart7rst(&self) -> super::vals::Tim2rst { - let val = (self.0 >> 30usize) & 0x01; - super::vals::Tim2rst(val as u8) - } - #[doc = "UART7 block reset"] - pub fn set_uart7rst(&mut self, val: super::vals::Tim2rst) { - self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize); - } - #[doc = "UART8 block reset"] - pub const fn uart8rst(&self) -> super::vals::Tim2rst { - let val = (self.0 >> 31usize) & 0x01; - super::vals::Tim2rst(val as u8) - } - #[doc = "UART8 block reset"] - pub fn set_uart8rst(&mut self, val: super::vals::Tim2rst) { - self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); - } + #[doc = "data register"] + pub fn dr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(12usize)) } } - impl Default for Apb1lrstr { - fn default() -> Apb1lrstr { - Apb1lrstr(0) - } + #[doc = "CRC polynomial register"] + pub fn crcpr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(16usize)) } } - #[doc = "RCC APB4 Clock Register"] + #[doc = "RX CRC register"] + pub fn rxcrcr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(20usize)) } + } + #[doc = "TX CRC register"] + pub fn txcrcr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(24usize)) } + } + } + pub mod vals { + use crate::generic::*; #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct C1Apb4enr(pub u32); - impl C1Apb4enr { - #[doc = "SYSCFG peripheral clock enable"] - pub const fn syscfgen(&self) -> super::vals::C1Apb4enrSyscfgen { - let val = (self.0 >> 1usize) & 0x01; - super::vals::C1Apb4enrSyscfgen(val as u8) - } - #[doc = "SYSCFG peripheral clock enable"] - pub fn set_syscfgen(&mut self, val: super::vals::C1Apb4enrSyscfgen) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); - } - #[doc = "LPUART1 Peripheral Clocks Enable"] - pub const fn lpuart1en(&self) -> super::vals::C1Apb4enrSyscfgen { - let val = (self.0 >> 3usize) & 0x01; - super::vals::C1Apb4enrSyscfgen(val as u8) - } - #[doc = "LPUART1 Peripheral Clocks Enable"] - pub fn set_lpuart1en(&mut self, val: super::vals::C1Apb4enrSyscfgen) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); - } - #[doc = "SPI6 Peripheral Clocks Enable"] - pub const fn spi6en(&self) -> super::vals::C1Apb4enrSyscfgen { - let val = (self.0 >> 5usize) & 0x01; - super::vals::C1Apb4enrSyscfgen(val as u8) - } - #[doc = "SPI6 Peripheral Clocks Enable"] - pub fn set_spi6en(&mut self, val: super::vals::C1Apb4enrSyscfgen) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); - } - #[doc = "I2C4 Peripheral Clocks Enable"] - pub const fn i2c4en(&self) -> super::vals::C1Apb4enrSyscfgen { - let val = (self.0 >> 7usize) & 0x01; - super::vals::C1Apb4enrSyscfgen(val as u8) - } - #[doc = "I2C4 Peripheral Clocks Enable"] - pub fn set_i2c4en(&mut self, val: super::vals::C1Apb4enrSyscfgen) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Frf(pub u8); + impl Frf { + #[doc = "SPI Motorola mode"] + pub const MOTOROLA: Self = Self(0); + #[doc = "SPI TI mode"] + pub const TI: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Ds(pub u8); + impl Ds { + #[doc = "4-bit"] + pub const FOURBIT: Self = Self(0x03); + #[doc = "5-bit"] + pub const FIVEBIT: Self = Self(0x04); + #[doc = "6-bit"] + pub const SIXBIT: Self = Self(0x05); + #[doc = "7-bit"] + pub const SEVENBIT: Self = Self(0x06); + #[doc = "8-bit"] + pub const EIGHTBIT: Self = Self(0x07); + #[doc = "9-bit"] + pub const NINEBIT: Self = Self(0x08); + #[doc = "10-bit"] + pub const TENBIT: Self = Self(0x09); + #[doc = "11-bit"] + pub const ELEVENBIT: Self = Self(0x0a); + #[doc = "12-bit"] + pub const TWELVEBIT: Self = Self(0x0b); + #[doc = "13-bit"] + pub const THIRTEENBIT: Self = Self(0x0c); + #[doc = "14-bit"] + pub const FOURTEENBIT: Self = Self(0x0d); + #[doc = "15-bit"] + pub const FIFTEENBIT: Self = Self(0x0e); + #[doc = "16-bit"] + pub const SIXTEENBIT: Self = Self(0x0f); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Lsbfirst(pub u8); + impl Lsbfirst { + #[doc = "Data is transmitted/received with the MSB first"] + pub const MSBFIRST: Self = Self(0); + #[doc = "Data is transmitted/received with the LSB first"] + pub const LSBFIRST: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Bidioe(pub u8); + impl Bidioe { + #[doc = "Output disabled (receive-only mode)"] + pub const OUTPUTDISABLED: Self = Self(0); + #[doc = "Output enabled (transmit-only mode)"] + pub const OUTPUTENABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Rxonly(pub u8); + impl Rxonly { + #[doc = "Full duplex (Transmit and receive)"] + pub const FULLDUPLEX: Self = Self(0); + #[doc = "Output disabled (Receive-only mode)"] + pub const OUTPUTDISABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct LdmaRx(pub u8); + impl LdmaRx { + #[doc = "Number of data to transfer for receive is even"] + pub const EVEN: Self = Self(0); + #[doc = "Number of data to transfer for receive is odd"] + pub const ODD: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Crcnext(pub u8); + impl Crcnext { + #[doc = "Next transmit value is from Tx buffer"] + pub const TXBUFFER: Self = Self(0); + #[doc = "Next transmit value is from Tx CRC register"] + pub const CRC: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Frlvlr(pub u8); + impl Frlvlr { + #[doc = "Rx FIFO Empty"] + pub const EMPTY: Self = Self(0); + #[doc = "Rx 1/4 FIFO"] + pub const QUARTER: Self = Self(0x01); + #[doc = "Rx 1/2 FIFO"] + pub const HALF: Self = Self(0x02); + #[doc = "Rx FIFO full"] + pub const FULL: Self = Self(0x03); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Bidimode(pub u8); + impl Bidimode { + #[doc = "2-line unidirectional data mode selected"] + pub const UNIDIRECTIONAL: Self = Self(0); + #[doc = "1-line bidirectional data mode selected"] + pub const BIDIRECTIONAL: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Mstr(pub u8); + impl Mstr { + #[doc = "Slave configuration"] + pub const SLAVE: Self = Self(0); + #[doc = "Master configuration"] + pub const MASTER: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Crcl(pub u8); + impl Crcl { + #[doc = "8-bit CRC length"] + pub const EIGHTBIT: Self = Self(0); + #[doc = "16-bit CRC length"] + pub const SIXTEENBIT: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Frxth(pub u8); + impl Frxth { + #[doc = "RXNE event is generated if the FIFO level is greater than or equal to 1/2 (16-bit)"] + pub const HALF: Self = Self(0); + #[doc = "RXNE event is generated if the FIFO level is greater than or equal to 1/4 (8-bit)"] + pub const QUARTER: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Cpha(pub u8); + impl Cpha { + #[doc = "The first clock transition is the first data capture edge"] + pub const FIRSTEDGE: Self = Self(0); + #[doc = "The second clock transition is the first data capture edge"] + pub const SECONDEDGE: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct LdmaTx(pub u8); + impl LdmaTx { + #[doc = "Number of data to transfer for transmit is even"] + pub const EVEN: Self = Self(0); + #[doc = "Number of data to transfer for transmit is odd"] + pub const ODD: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Cpol(pub u8); + impl Cpol { + #[doc = "CK to 0 when idle"] + pub const IDLELOW: Self = Self(0); + #[doc = "CK to 1 when idle"] + pub const IDLEHIGH: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Br(pub u8); + impl Br { + #[doc = "f_PCLK / 2"] + pub const DIV2: Self = Self(0); + #[doc = "f_PCLK / 4"] + pub const DIV4: Self = Self(0x01); + #[doc = "f_PCLK / 8"] + pub const DIV8: Self = Self(0x02); + #[doc = "f_PCLK / 16"] + pub const DIV16: Self = Self(0x03); + #[doc = "f_PCLK / 32"] + pub const DIV32: Self = Self(0x04); + #[doc = "f_PCLK / 64"] + pub const DIV64: Self = Self(0x05); + #[doc = "f_PCLK / 128"] + pub const DIV128: Self = Self(0x06); + #[doc = "f_PCLK / 256"] + pub const DIV256: Self = Self(0x07); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Ftlvlr(pub u8); + impl Ftlvlr { + #[doc = "Tx FIFO Empty"] + pub const EMPTY: Self = Self(0); + #[doc = "Tx 1/4 FIFO"] + pub const QUARTER: Self = Self(0x01); + #[doc = "Tx 1/2 FIFO"] + pub const HALF: Self = Self(0x02); + #[doc = "Tx FIFO full"] + pub const FULL: Self = Self(0x03); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Frer(pub u8); + impl Frer { + #[doc = "No frame format error"] + pub const NOERROR: Self = Self(0); + #[doc = "A frame format error occurred"] + pub const ERROR: Self = Self(0x01); + } + } + pub mod regs { + use crate::generic::*; + #[doc = "RX CRC register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Rxcrcr(pub u32); + impl Rxcrcr { + #[doc = "Rx CRC register"] + pub const fn rx_crc(&self) -> u16 { + let val = (self.0 >> 0usize) & 0xffff; + val as u16 } - #[doc = "LPTIM2 Peripheral Clocks Enable"] - pub const fn lptim2en(&self) -> super::vals::C1Apb4enrSyscfgen { - let val = (self.0 >> 9usize) & 0x01; - super::vals::C1Apb4enrSyscfgen(val as u8) + #[doc = "Rx CRC register"] + pub fn set_rx_crc(&mut self, val: u16) { + self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); } - #[doc = "LPTIM2 Peripheral Clocks Enable"] - pub fn set_lptim2en(&mut self, val: super::vals::C1Apb4enrSyscfgen) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + } + impl Default for Rxcrcr { + fn default() -> Rxcrcr { + Rxcrcr(0) } - #[doc = "LPTIM3 Peripheral Clocks Enable"] - pub const fn lptim3en(&self) -> super::vals::C1Apb4enrSyscfgen { - let val = (self.0 >> 10usize) & 0x01; - super::vals::C1Apb4enrSyscfgen(val as u8) + } + #[doc = "TX CRC register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Txcrcr(pub u32); + impl Txcrcr { + #[doc = "Tx CRC register"] + pub const fn tx_crc(&self) -> u16 { + let val = (self.0 >> 0usize) & 0xffff; + val as u16 } - #[doc = "LPTIM3 Peripheral Clocks Enable"] - pub fn set_lptim3en(&mut self, val: super::vals::C1Apb4enrSyscfgen) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); - } - #[doc = "LPTIM4 Peripheral Clocks Enable"] - pub const fn lptim4en(&self) -> super::vals::C1Apb4enrSyscfgen { - let val = (self.0 >> 11usize) & 0x01; - super::vals::C1Apb4enrSyscfgen(val as u8) - } - #[doc = "LPTIM4 Peripheral Clocks Enable"] - pub fn set_lptim4en(&mut self, val: super::vals::C1Apb4enrSyscfgen) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); - } - #[doc = "LPTIM5 Peripheral Clocks Enable"] - pub const fn lptim5en(&self) -> super::vals::C1Apb4enrSyscfgen { - let val = (self.0 >> 12usize) & 0x01; - super::vals::C1Apb4enrSyscfgen(val as u8) - } - #[doc = "LPTIM5 Peripheral Clocks Enable"] - pub fn set_lptim5en(&mut self, val: super::vals::C1Apb4enrSyscfgen) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); - } - #[doc = "COMP1/2 peripheral clock enable"] - pub const fn comp12en(&self) -> super::vals::C1Apb4enrSyscfgen { - let val = (self.0 >> 14usize) & 0x01; - super::vals::C1Apb4enrSyscfgen(val as u8) - } - #[doc = "COMP1/2 peripheral clock enable"] - pub fn set_comp12en(&mut self, val: super::vals::C1Apb4enrSyscfgen) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); - } - #[doc = "VREF peripheral clock enable"] - pub const fn vrefen(&self) -> super::vals::C1Apb4enrSyscfgen { - let val = (self.0 >> 15usize) & 0x01; - super::vals::C1Apb4enrSyscfgen(val as u8) - } - #[doc = "VREF peripheral clock enable"] - pub fn set_vrefen(&mut self, val: super::vals::C1Apb4enrSyscfgen) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); - } - #[doc = "RTC APB Clock Enable"] - pub const fn rtcapben(&self) -> super::vals::C1Apb4enrSyscfgen { - let val = (self.0 >> 16usize) & 0x01; - super::vals::C1Apb4enrSyscfgen(val as u8) - } - #[doc = "RTC APB Clock Enable"] - pub fn set_rtcapben(&mut self, val: super::vals::C1Apb4enrSyscfgen) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); - } - #[doc = "SAI4 Peripheral Clocks Enable"] - pub const fn sai4en(&self) -> super::vals::C1Apb4enrSyscfgen { - let val = (self.0 >> 21usize) & 0x01; - super::vals::C1Apb4enrSyscfgen(val as u8) - } - #[doc = "SAI4 Peripheral Clocks Enable"] - pub fn set_sai4en(&mut self, val: super::vals::C1Apb4enrSyscfgen) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); + #[doc = "Tx CRC register"] + pub fn set_tx_crc(&mut self, val: u16) { + self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); } } - impl Default for C1Apb4enr { - fn default() -> C1Apb4enr { - C1Apb4enr(0) + impl Default for Txcrcr { + fn default() -> Txcrcr { + Txcrcr(0) } } - #[doc = "RCC AHB4 Clock Register"] + #[doc = "control register 1"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct C1Ahb4enr(pub u32); - impl C1Ahb4enr { - #[doc = "0GPIO peripheral clock enable"] - pub const fn gpioaen(&self) -> super::vals::C1Ahb4enrGpioaen { + pub struct Cr1(pub u32); + impl Cr1 { + #[doc = "Clock phase"] + pub const fn cpha(&self) -> super::vals::Cpha { let val = (self.0 >> 0usize) & 0x01; - super::vals::C1Ahb4enrGpioaen(val as u8) + super::vals::Cpha(val as u8) } - #[doc = "0GPIO peripheral clock enable"] - pub fn set_gpioaen(&mut self, val: super::vals::C1Ahb4enrGpioaen) { + #[doc = "Clock phase"] + pub fn set_cpha(&mut self, val: super::vals::Cpha) { self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "0GPIO peripheral clock enable"] - pub const fn gpioben(&self) -> super::vals::C1Ahb4enrGpioaen { + #[doc = "Clock polarity"] + pub const fn cpol(&self) -> super::vals::Cpol { let val = (self.0 >> 1usize) & 0x01; - super::vals::C1Ahb4enrGpioaen(val as u8) + super::vals::Cpol(val as u8) } - #[doc = "0GPIO peripheral clock enable"] - pub fn set_gpioben(&mut self, val: super::vals::C1Ahb4enrGpioaen) { + #[doc = "Clock polarity"] + pub fn set_cpol(&mut self, val: super::vals::Cpol) { self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - #[doc = "0GPIO peripheral clock enable"] - pub const fn gpiocen(&self) -> super::vals::C1Ahb4enrGpioaen { + #[doc = "Master selection"] + pub const fn mstr(&self) -> super::vals::Mstr { let val = (self.0 >> 2usize) & 0x01; - super::vals::C1Ahb4enrGpioaen(val as u8) + super::vals::Mstr(val as u8) } - #[doc = "0GPIO peripheral clock enable"] - pub fn set_gpiocen(&mut self, val: super::vals::C1Ahb4enrGpioaen) { + #[doc = "Master selection"] + pub fn set_mstr(&mut self, val: super::vals::Mstr) { self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); } - #[doc = "0GPIO peripheral clock enable"] - pub const fn gpioden(&self) -> super::vals::C1Ahb4enrGpioaen { - let val = (self.0 >> 3usize) & 0x01; - super::vals::C1Ahb4enrGpioaen(val as u8) - } - #[doc = "0GPIO peripheral clock enable"] - pub fn set_gpioden(&mut self, val: super::vals::C1Ahb4enrGpioaen) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); - } - #[doc = "0GPIO peripheral clock enable"] - pub const fn gpioeen(&self) -> super::vals::C1Ahb4enrGpioaen { - let val = (self.0 >> 4usize) & 0x01; - super::vals::C1Ahb4enrGpioaen(val as u8) - } - #[doc = "0GPIO peripheral clock enable"] - pub fn set_gpioeen(&mut self, val: super::vals::C1Ahb4enrGpioaen) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); - } - #[doc = "0GPIO peripheral clock enable"] - pub const fn gpiofen(&self) -> super::vals::C1Ahb4enrGpioaen { - let val = (self.0 >> 5usize) & 0x01; - super::vals::C1Ahb4enrGpioaen(val as u8) + #[doc = "Baud rate control"] + pub const fn br(&self) -> super::vals::Br { + let val = (self.0 >> 3usize) & 0x07; + super::vals::Br(val as u8) } - #[doc = "0GPIO peripheral clock enable"] - pub fn set_gpiofen(&mut self, val: super::vals::C1Ahb4enrGpioaen) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + #[doc = "Baud rate control"] + pub fn set_br(&mut self, val: super::vals::Br) { + self.0 = (self.0 & !(0x07 << 3usize)) | (((val.0 as u32) & 0x07) << 3usize); } - #[doc = "0GPIO peripheral clock enable"] - pub const fn gpiogen(&self) -> super::vals::C1Ahb4enrGpioaen { + #[doc = "SPI enable"] + pub const fn spe(&self) -> bool { let val = (self.0 >> 6usize) & 0x01; - super::vals::C1Ahb4enrGpioaen(val as u8) + val != 0 } - #[doc = "0GPIO peripheral clock enable"] - pub fn set_gpiogen(&mut self, val: super::vals::C1Ahb4enrGpioaen) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); + #[doc = "SPI enable"] + pub fn set_spe(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - #[doc = "0GPIO peripheral clock enable"] - pub const fn gpiohen(&self) -> super::vals::C1Ahb4enrGpioaen { + #[doc = "Frame format"] + pub const fn lsbfirst(&self) -> super::vals::Lsbfirst { let val = (self.0 >> 7usize) & 0x01; - super::vals::C1Ahb4enrGpioaen(val as u8) + super::vals::Lsbfirst(val as u8) } - #[doc = "0GPIO peripheral clock enable"] - pub fn set_gpiohen(&mut self, val: super::vals::C1Ahb4enrGpioaen) { + #[doc = "Frame format"] + pub fn set_lsbfirst(&mut self, val: super::vals::Lsbfirst) { self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); } - #[doc = "0GPIO peripheral clock enable"] - pub const fn gpioien(&self) -> super::vals::C1Ahb4enrGpioaen { + #[doc = "Internal slave select"] + pub const fn ssi(&self) -> bool { let val = (self.0 >> 8usize) & 0x01; - super::vals::C1Ahb4enrGpioaen(val as u8) + val != 0 } - #[doc = "0GPIO peripheral clock enable"] - pub fn set_gpioien(&mut self, val: super::vals::C1Ahb4enrGpioaen) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); + #[doc = "Internal slave select"] + pub fn set_ssi(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); } - #[doc = "0GPIO peripheral clock enable"] - pub const fn gpiojen(&self) -> super::vals::C1Ahb4enrGpioaen { + #[doc = "Software slave management"] + pub const fn ssm(&self) -> bool { let val = (self.0 >> 9usize) & 0x01; - super::vals::C1Ahb4enrGpioaen(val as u8) + val != 0 } - #[doc = "0GPIO peripheral clock enable"] - pub fn set_gpiojen(&mut self, val: super::vals::C1Ahb4enrGpioaen) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + #[doc = "Software slave management"] + pub fn set_ssm(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); } - #[doc = "0GPIO peripheral clock enable"] - pub const fn gpioken(&self) -> super::vals::C1Ahb4enrGpioaen { + #[doc = "Receive only"] + pub const fn rxonly(&self) -> super::vals::Rxonly { let val = (self.0 >> 10usize) & 0x01; - super::vals::C1Ahb4enrGpioaen(val as u8) + super::vals::Rxonly(val as u8) } - #[doc = "0GPIO peripheral clock enable"] - pub fn set_gpioken(&mut self, val: super::vals::C1Ahb4enrGpioaen) { + #[doc = "Receive only"] + pub fn set_rxonly(&mut self, val: super::vals::Rxonly) { self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); } - #[doc = "CRC peripheral clock enable"] - pub const fn crcen(&self) -> super::vals::C1Ahb4enrGpioaen { - let val = (self.0 >> 19usize) & 0x01; - super::vals::C1Ahb4enrGpioaen(val as u8) + #[doc = "CRC length"] + pub const fn crcl(&self) -> super::vals::Crcl { + let val = (self.0 >> 11usize) & 0x01; + super::vals::Crcl(val as u8) } - #[doc = "CRC peripheral clock enable"] - pub fn set_crcen(&mut self, val: super::vals::C1Ahb4enrGpioaen) { - self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); + #[doc = "CRC length"] + pub fn set_crcl(&mut self, val: super::vals::Crcl) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); } - #[doc = "BDMA and DMAMUX2 Clock Enable"] - pub const fn bdmaen(&self) -> super::vals::C1Ahb4enrGpioaen { - let val = (self.0 >> 21usize) & 0x01; - super::vals::C1Ahb4enrGpioaen(val as u8) + #[doc = "CRC transfer next"] + pub const fn crcnext(&self) -> super::vals::Crcnext { + let val = (self.0 >> 12usize) & 0x01; + super::vals::Crcnext(val as u8) } - #[doc = "BDMA and DMAMUX2 Clock Enable"] - pub fn set_bdmaen(&mut self, val: super::vals::C1Ahb4enrGpioaen) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); + #[doc = "CRC transfer next"] + pub fn set_crcnext(&mut self, val: super::vals::Crcnext) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); } - #[doc = "ADC3 Peripheral Clocks Enable"] - pub const fn adc3en(&self) -> super::vals::C1Ahb4enrGpioaen { - let val = (self.0 >> 24usize) & 0x01; - super::vals::C1Ahb4enrGpioaen(val as u8) + #[doc = "Hardware CRC calculation enable"] + pub const fn crcen(&self) -> bool { + let val = (self.0 >> 13usize) & 0x01; + val != 0 } - #[doc = "ADC3 Peripheral Clocks Enable"] - pub fn set_adc3en(&mut self, val: super::vals::C1Ahb4enrGpioaen) { - self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); + #[doc = "Hardware CRC calculation enable"] + pub fn set_crcen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); } - #[doc = "HSEM peripheral clock enable"] - pub const fn hsemen(&self) -> super::vals::C1Ahb4enrGpioaen { - let val = (self.0 >> 25usize) & 0x01; - super::vals::C1Ahb4enrGpioaen(val as u8) + #[doc = "Output enable in bidirectional mode"] + pub const fn bidioe(&self) -> super::vals::Bidioe { + let val = (self.0 >> 14usize) & 0x01; + super::vals::Bidioe(val as u8) } - #[doc = "HSEM peripheral clock enable"] - pub fn set_hsemen(&mut self, val: super::vals::C1Ahb4enrGpioaen) { - self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize); + #[doc = "Output enable in bidirectional mode"] + pub fn set_bidioe(&mut self, val: super::vals::Bidioe) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); } - #[doc = "Backup RAM Clock Enable"] - pub const fn bkpramen(&self) -> super::vals::C1Ahb4enrGpioaen { - let val = (self.0 >> 28usize) & 0x01; - super::vals::C1Ahb4enrGpioaen(val as u8) + #[doc = "Bidirectional data mode enable"] + pub const fn bidimode(&self) -> super::vals::Bidimode { + let val = (self.0 >> 15usize) & 0x01; + super::vals::Bidimode(val as u8) } - #[doc = "Backup RAM Clock Enable"] - pub fn set_bkpramen(&mut self, val: super::vals::C1Ahb4enrGpioaen) { - self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); + #[doc = "Bidirectional data mode enable"] + pub fn set_bidimode(&mut self, val: super::vals::Bidimode) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); } } - impl Default for C1Ahb4enr { - fn default() -> C1Ahb4enr { - C1Ahb4enr(0) + impl Default for Cr1 { + fn default() -> Cr1 { + Cr1(0) } } - #[doc = "RCC AHB2 Clock Register"] + #[doc = "CRC polynomial register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct C1Ahb2enr(pub u32); - impl C1Ahb2enr { - #[doc = "DCMI peripheral clock"] - pub const fn dcmien(&self) -> super::vals::C1Ahb2enrDcmien { + pub struct Crcpr(pub u32); + impl Crcpr { + #[doc = "CRC polynomial register"] + pub const fn crcpoly(&self) -> u16 { + let val = (self.0 >> 0usize) & 0xffff; + val as u16 + } + #[doc = "CRC polynomial register"] + pub fn set_crcpoly(&mut self, val: u16) { + self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); + } + } + impl Default for Crcpr { + fn default() -> Crcpr { + Crcpr(0) + } + } + #[doc = "status register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Sr(pub u32); + impl Sr { + #[doc = "Receive buffer not empty"] + pub const fn rxne(&self) -> bool { let val = (self.0 >> 0usize) & 0x01; - super::vals::C1Ahb2enrDcmien(val as u8) + val != 0 } - #[doc = "DCMI peripheral clock"] - pub fn set_dcmien(&mut self, val: super::vals::C1Ahb2enrDcmien) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + #[doc = "Receive buffer not empty"] + pub fn set_rxne(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "CRYPT peripheral clock enable"] - pub const fn crypten(&self) -> super::vals::C1Ahb2enrDcmien { + #[doc = "Transmit buffer empty"] + pub const fn txe(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; + val != 0 + } + #[doc = "Transmit buffer empty"] + pub fn set_txe(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + } + #[doc = "CRC error flag"] + pub const fn crcerr(&self) -> bool { let val = (self.0 >> 4usize) & 0x01; - super::vals::C1Ahb2enrDcmien(val as u8) + val != 0 } - #[doc = "CRYPT peripheral clock enable"] - pub fn set_crypten(&mut self, val: super::vals::C1Ahb2enrDcmien) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + #[doc = "CRC error flag"] + pub fn set_crcerr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); } - #[doc = "HASH peripheral clock enable"] - pub const fn hashen(&self) -> super::vals::C1Ahb2enrDcmien { + #[doc = "Mode fault"] + pub const fn modf(&self) -> bool { let val = (self.0 >> 5usize) & 0x01; - super::vals::C1Ahb2enrDcmien(val as u8) + val != 0 } - #[doc = "HASH peripheral clock enable"] - pub fn set_hashen(&mut self, val: super::vals::C1Ahb2enrDcmien) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + #[doc = "Mode fault"] + pub fn set_modf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); } - #[doc = "RNG peripheral clocks enable"] - pub const fn rngen(&self) -> super::vals::C1Ahb2enrDcmien { + #[doc = "Overrun flag"] + pub const fn ovr(&self) -> bool { let val = (self.0 >> 6usize) & 0x01; - super::vals::C1Ahb2enrDcmien(val as u8) + val != 0 } - #[doc = "RNG peripheral clocks enable"] - pub fn set_rngen(&mut self, val: super::vals::C1Ahb2enrDcmien) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); + #[doc = "Overrun flag"] + pub fn set_ovr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - #[doc = "SDMMC2 and SDMMC2 delay clock enable"] - pub const fn sdmmc2en(&self) -> super::vals::C1Ahb2enrDcmien { - let val = (self.0 >> 9usize) & 0x01; - super::vals::C1Ahb2enrDcmien(val as u8) + #[doc = "Busy flag"] + pub const fn bsy(&self) -> bool { + let val = (self.0 >> 7usize) & 0x01; + val != 0 } - #[doc = "SDMMC2 and SDMMC2 delay clock enable"] - pub fn set_sdmmc2en(&mut self, val: super::vals::C1Ahb2enrDcmien) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + #[doc = "Busy flag"] + pub fn set_bsy(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); } - #[doc = "SRAM1 block enable"] - pub const fn sram1en(&self) -> super::vals::C1Ahb2enrDcmien { - let val = (self.0 >> 29usize) & 0x01; - super::vals::C1Ahb2enrDcmien(val as u8) + #[doc = "Frame format error"] + pub const fn fre(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 } - #[doc = "SRAM1 block enable"] - pub fn set_sram1en(&mut self, val: super::vals::C1Ahb2enrDcmien) { - self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); + #[doc = "Frame format error"] + pub fn set_fre(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); } - #[doc = "SRAM2 block enable"] - pub const fn sram2en(&self) -> super::vals::C1Ahb2enrDcmien { - let val = (self.0 >> 30usize) & 0x01; - super::vals::C1Ahb2enrDcmien(val as u8) + #[doc = "FIFO reception level"] + pub const fn frlvl(&self) -> u8 { + let val = (self.0 >> 9usize) & 0x03; + val as u8 } - #[doc = "SRAM2 block enable"] - pub fn set_sram2en(&mut self, val: super::vals::C1Ahb2enrDcmien) { - self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize); + #[doc = "FIFO reception level"] + pub fn set_frlvl(&mut self, val: u8) { + self.0 = (self.0 & !(0x03 << 9usize)) | (((val as u32) & 0x03) << 9usize); } - #[doc = "SRAM3 block enable"] - pub const fn sram3en(&self) -> super::vals::C1Ahb2enrDcmien { - let val = (self.0 >> 31usize) & 0x01; - super::vals::C1Ahb2enrDcmien(val as u8) + #[doc = "FIFO Transmission Level"] + pub const fn ftlvl(&self) -> u8 { + let val = (self.0 >> 11usize) & 0x03; + val as u8 } - #[doc = "SRAM3 block enable"] - pub fn set_sram3en(&mut self, val: super::vals::C1Ahb2enrDcmien) { - self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); + #[doc = "FIFO Transmission Level"] + pub fn set_ftlvl(&mut self, val: u8) { + self.0 = (self.0 & !(0x03 << 11usize)) | (((val as u32) & 0x03) << 11usize); } } - impl Default for C1Ahb2enr { - fn default() -> C1Ahb2enr { - C1Ahb2enr(0) + impl Default for Sr { + fn default() -> Sr { + Sr(0) } } - #[doc = "RCC AHB4 Clock Register"] + #[doc = "data register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ahb4enr(pub u32); - impl Ahb4enr { - #[doc = "0GPIO peripheral clock enable"] - pub const fn gpioaen(&self) -> super::vals::Ahb4enrGpioaen { + pub struct Dr(pub u32); + impl Dr { + #[doc = "Data register"] + pub const fn dr(&self) -> u16 { + let val = (self.0 >> 0usize) & 0xffff; + val as u16 + } + #[doc = "Data register"] + pub fn set_dr(&mut self, val: u16) { + self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); + } + } + impl Default for Dr { + fn default() -> Dr { + Dr(0) + } + } + #[doc = "control register 2"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Cr2(pub u32); + impl Cr2 { + #[doc = "Rx buffer DMA enable"] + pub const fn rxdmaen(&self) -> bool { let val = (self.0 >> 0usize) & 0x01; - super::vals::Ahb4enrGpioaen(val as u8) + val != 0 } - #[doc = "0GPIO peripheral clock enable"] - pub fn set_gpioaen(&mut self, val: super::vals::Ahb4enrGpioaen) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + #[doc = "Rx buffer DMA enable"] + pub fn set_rxdmaen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "0GPIO peripheral clock enable"] - pub const fn gpioben(&self) -> super::vals::Ahb4enrGpioaen { + #[doc = "Tx buffer DMA enable"] + pub const fn txdmaen(&self) -> bool { let val = (self.0 >> 1usize) & 0x01; - super::vals::Ahb4enrGpioaen(val as u8) + val != 0 } - #[doc = "0GPIO peripheral clock enable"] - pub fn set_gpioben(&mut self, val: super::vals::Ahb4enrGpioaen) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + #[doc = "Tx buffer DMA enable"] + pub fn set_txdmaen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - #[doc = "0GPIO peripheral clock enable"] - pub const fn gpiocen(&self) -> super::vals::Ahb4enrGpioaen { + #[doc = "SS output enable"] + pub const fn ssoe(&self) -> bool { let val = (self.0 >> 2usize) & 0x01; - super::vals::Ahb4enrGpioaen(val as u8) + val != 0 } - #[doc = "0GPIO peripheral clock enable"] - pub fn set_gpiocen(&mut self, val: super::vals::Ahb4enrGpioaen) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); + #[doc = "SS output enable"] + pub fn set_ssoe(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); } - #[doc = "0GPIO peripheral clock enable"] - pub const fn gpioden(&self) -> super::vals::Ahb4enrGpioaen { + #[doc = "NSS pulse management"] + pub const fn nssp(&self) -> bool { let val = (self.0 >> 3usize) & 0x01; - super::vals::Ahb4enrGpioaen(val as u8) + val != 0 } - #[doc = "0GPIO peripheral clock enable"] - pub fn set_gpioden(&mut self, val: super::vals::Ahb4enrGpioaen) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); + #[doc = "NSS pulse management"] + pub fn set_nssp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); } - #[doc = "0GPIO peripheral clock enable"] - pub const fn gpioeen(&self) -> super::vals::Ahb4enrGpioaen { + #[doc = "Frame format"] + pub const fn frf(&self) -> super::vals::Frf { let val = (self.0 >> 4usize) & 0x01; - super::vals::Ahb4enrGpioaen(val as u8) + super::vals::Frf(val as u8) } - #[doc = "0GPIO peripheral clock enable"] - pub fn set_gpioeen(&mut self, val: super::vals::Ahb4enrGpioaen) { + #[doc = "Frame format"] + pub fn set_frf(&mut self, val: super::vals::Frf) { self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); } - #[doc = "0GPIO peripheral clock enable"] - pub const fn gpiofen(&self) -> super::vals::Ahb4enrGpioaen { + #[doc = "Error interrupt enable"] + pub const fn errie(&self) -> bool { let val = (self.0 >> 5usize) & 0x01; - super::vals::Ahb4enrGpioaen(val as u8) + val != 0 } - #[doc = "0GPIO peripheral clock enable"] - pub fn set_gpiofen(&mut self, val: super::vals::Ahb4enrGpioaen) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + #[doc = "Error interrupt enable"] + pub fn set_errie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); } - #[doc = "0GPIO peripheral clock enable"] - pub const fn gpiogen(&self) -> super::vals::Ahb4enrGpioaen { + #[doc = "RX buffer not empty interrupt enable"] + pub const fn rxneie(&self) -> bool { let val = (self.0 >> 6usize) & 0x01; - super::vals::Ahb4enrGpioaen(val as u8) + val != 0 } - #[doc = "0GPIO peripheral clock enable"] - pub fn set_gpiogen(&mut self, val: super::vals::Ahb4enrGpioaen) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); + #[doc = "RX buffer not empty interrupt enable"] + pub fn set_rxneie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - #[doc = "0GPIO peripheral clock enable"] - pub const fn gpiohen(&self) -> super::vals::Ahb4enrGpioaen { + #[doc = "Tx buffer empty interrupt enable"] + pub const fn txeie(&self) -> bool { let val = (self.0 >> 7usize) & 0x01; - super::vals::Ahb4enrGpioaen(val as u8) - } - #[doc = "0GPIO peripheral clock enable"] - pub fn set_gpiohen(&mut self, val: super::vals::Ahb4enrGpioaen) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); - } - #[doc = "0GPIO peripheral clock enable"] - pub const fn gpioien(&self) -> super::vals::Ahb4enrGpioaen { - let val = (self.0 >> 8usize) & 0x01; - super::vals::Ahb4enrGpioaen(val as u8) - } - #[doc = "0GPIO peripheral clock enable"] - pub fn set_gpioien(&mut self, val: super::vals::Ahb4enrGpioaen) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); - } - #[doc = "0GPIO peripheral clock enable"] - pub const fn gpiojen(&self) -> super::vals::Ahb4enrGpioaen { - let val = (self.0 >> 9usize) & 0x01; - super::vals::Ahb4enrGpioaen(val as u8) - } - #[doc = "0GPIO peripheral clock enable"] - pub fn set_gpiojen(&mut self, val: super::vals::Ahb4enrGpioaen) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + val != 0 } - #[doc = "0GPIO peripheral clock enable"] - pub const fn gpioken(&self) -> super::vals::Ahb4enrGpioaen { - let val = (self.0 >> 10usize) & 0x01; - super::vals::Ahb4enrGpioaen(val as u8) + #[doc = "Tx buffer empty interrupt enable"] + pub fn set_txeie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); } - #[doc = "0GPIO peripheral clock enable"] - pub fn set_gpioken(&mut self, val: super::vals::Ahb4enrGpioaen) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); + #[doc = "Data size"] + pub const fn ds(&self) -> super::vals::Ds { + let val = (self.0 >> 8usize) & 0x0f; + super::vals::Ds(val as u8) } - #[doc = "CRC peripheral clock enable"] - pub const fn crcen(&self) -> super::vals::Ahb4enrGpioaen { - let val = (self.0 >> 19usize) & 0x01; - super::vals::Ahb4enrGpioaen(val as u8) + #[doc = "Data size"] + pub fn set_ds(&mut self, val: super::vals::Ds) { + self.0 = (self.0 & !(0x0f << 8usize)) | (((val.0 as u32) & 0x0f) << 8usize); } - #[doc = "CRC peripheral clock enable"] - pub fn set_crcen(&mut self, val: super::vals::Ahb4enrGpioaen) { - self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); + #[doc = "FIFO reception threshold"] + pub const fn frxth(&self) -> super::vals::Frxth { + let val = (self.0 >> 12usize) & 0x01; + super::vals::Frxth(val as u8) } - #[doc = "BDMA and DMAMUX2 Clock Enable"] - pub const fn bdmaen(&self) -> super::vals::Ahb4enrGpioaen { - let val = (self.0 >> 21usize) & 0x01; - super::vals::Ahb4enrGpioaen(val as u8) + #[doc = "FIFO reception threshold"] + pub fn set_frxth(&mut self, val: super::vals::Frxth) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); } - #[doc = "BDMA and DMAMUX2 Clock Enable"] - pub fn set_bdmaen(&mut self, val: super::vals::Ahb4enrGpioaen) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); + #[doc = "Last DMA transfer for reception"] + pub const fn ldma_rx(&self) -> super::vals::LdmaRx { + let val = (self.0 >> 13usize) & 0x01; + super::vals::LdmaRx(val as u8) } - #[doc = "ADC3 Peripheral Clocks Enable"] - pub const fn adc3en(&self) -> super::vals::Ahb4enrGpioaen { - let val = (self.0 >> 24usize) & 0x01; - super::vals::Ahb4enrGpioaen(val as u8) + #[doc = "Last DMA transfer for reception"] + pub fn set_ldma_rx(&mut self, val: super::vals::LdmaRx) { + self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize); } - #[doc = "ADC3 Peripheral Clocks Enable"] - pub fn set_adc3en(&mut self, val: super::vals::Ahb4enrGpioaen) { - self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); + #[doc = "Last DMA transfer for transmission"] + pub const fn ldma_tx(&self) -> super::vals::LdmaTx { + let val = (self.0 >> 14usize) & 0x01; + super::vals::LdmaTx(val as u8) } - #[doc = "HSEM peripheral clock enable"] - pub const fn hsemen(&self) -> super::vals::Ahb4enrGpioaen { - let val = (self.0 >> 25usize) & 0x01; - super::vals::Ahb4enrGpioaen(val as u8) + #[doc = "Last DMA transfer for transmission"] + pub fn set_ldma_tx(&mut self, val: super::vals::LdmaTx) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); } - #[doc = "HSEM peripheral clock enable"] - pub fn set_hsemen(&mut self, val: super::vals::Ahb4enrGpioaen) { - self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize); + } + impl Default for Cr2 { + fn default() -> Cr2 { + Cr2(0) } - #[doc = "Backup RAM Clock Enable"] - pub const fn bkpramen(&self) -> super::vals::Ahb4enrGpioaen { - let val = (self.0 >> 28usize) & 0x01; - super::vals::Ahb4enrGpioaen(val as u8) + } + } +} +pub mod flash_h7 { + use crate::generic::*; + #[doc = "Flash"] + #[derive(Copy, Clone)] + pub struct Flash(pub *mut u8); + unsafe impl Send for Flash {} + unsafe impl Sync for Flash {} + impl Flash { + #[doc = "Access control register"] + pub fn acr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(0usize)) } + } + #[doc = "Cluster BANK%s, containing KEYR?, CR?, SR?, CCR?, PRAR_CUR?, PRAR_PRG?, SCAR_CUR?, SCAR_PRG?, WPSN_CUR?R, WPSN_PRG?R, CRCCR?, CRCSADD?R, CRCEADD?R, ECC_FA?R"] + pub fn bank(self, n: usize) -> Bank { + assert!(n < 2usize); + unsafe { Bank(self.0.add(4usize + n * 256usize)) } + } + #[doc = "FLASH option key register"] + pub fn optkeyr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(8usize)) } + } + #[doc = "FLASH option control register"] + pub fn optcr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(24usize)) } + } + #[doc = "FLASH option status register"] + pub fn optsr_cur(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(28usize)) } + } + #[doc = "FLASH option status register"] + pub fn optsr_prg(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(32usize)) } + } + #[doc = "FLASH option clear control register"] + pub fn optccr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(36usize)) } + } + #[doc = "FLASH register with boot address"] + pub fn boot_curr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(64usize)) } + } + #[doc = "FLASH register with boot address"] + pub fn boot_prgr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(68usize)) } + } + #[doc = "FLASH CRC data register"] + pub fn crcdatar(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(92usize)) } + } + } + #[doc = "Cluster BANK%s, containing KEYR?, CR?, SR?, CCR?, PRAR_CUR?, PRAR_PRG?, SCAR_CUR?, SCAR_PRG?, WPSN_CUR?R, WPSN_PRG?R, CRCCR?, CRCSADD?R, CRCEADD?R, ECC_FA?R"] + #[derive(Copy, Clone)] + pub struct Bank(pub *mut u8); + unsafe impl Send for Bank {} + unsafe impl Sync for Bank {} + impl Bank { + #[doc = "FLASH key register for bank 1"] + pub fn keyr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(0usize)) } + } + #[doc = "FLASH control register for bank 1"] + pub fn cr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(8usize)) } + } + #[doc = "FLASH status register for bank 1"] + pub fn sr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(12usize)) } + } + #[doc = "FLASH clear control register for bank 1"] + pub fn ccr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(16usize)) } + } + #[doc = "FLASH protection address for bank 1"] + pub fn prar_cur(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(36usize)) } + } + #[doc = "FLASH protection address for bank 1"] + pub fn prar_prg(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(40usize)) } + } + #[doc = "FLASH secure address for bank 1"] + pub fn scar_cur(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(44usize)) } + } + #[doc = "FLASH secure address for bank 1"] + pub fn scar_prg(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(48usize)) } + } + #[doc = "FLASH write sector protection for bank 1"] + pub fn wpsn_curr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(52usize)) } + } + #[doc = "FLASH write sector protection for bank 1"] + pub fn wpsn_prgr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(56usize)) } + } + #[doc = "FLASH CRC control register for bank 1"] + pub fn crccr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(76usize)) } + } + #[doc = "FLASH CRC start address register for bank 1"] + pub fn crcsaddr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(80usize)) } + } + #[doc = "FLASH CRC end address register for bank 1"] + pub fn crceaddr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(84usize)) } + } + #[doc = "FLASH ECC fail address for bank 1"] + pub fn far(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(92usize)) } + } + } + pub mod regs { + use crate::generic::*; + #[doc = "FLASH CRC start address register for bank 1"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Crcsaddr(pub u32); + impl Crcsaddr { + #[doc = "CRC start address on bank 1"] + pub const fn crc_start_addr(&self) -> u32 { + let val = (self.0 >> 0usize) & 0xffff_ffff; + val as u32 } - #[doc = "Backup RAM Clock Enable"] - pub fn set_bkpramen(&mut self, val: super::vals::Ahb4enrGpioaen) { - self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); + #[doc = "CRC start address on bank 1"] + pub fn set_crc_start_addr(&mut self, val: u32) { + self.0 = + (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); } } - impl Default for Ahb4enr { - fn default() -> Ahb4enr { - Ahb4enr(0) + impl Default for Crcsaddr { + fn default() -> Crcsaddr { + Crcsaddr(0) } } - #[doc = "RCC APB4 Sleep Clock Register"] + #[doc = "FLASH protection address for bank 1"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct C1Apb4lpenr(pub u32); - impl C1Apb4lpenr { - #[doc = "SYSCFG peripheral clock enable during CSleep mode"] - pub const fn syscfglpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen { - let val = (self.0 >> 1usize) & 0x01; - super::vals::C1Apb4lpenrSyscfglpen(val as u8) + pub struct PrarPrg(pub u32); + impl PrarPrg { + #[doc = "Bank 1 lowest PCROP protected address configuration"] + pub const fn prot_area_start(&self) -> u16 { + let val = (self.0 >> 0usize) & 0x0fff; + val as u16 } - #[doc = "SYSCFG peripheral clock enable during CSleep mode"] - pub fn set_syscfglpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); - } - #[doc = "LPUART1 Peripheral Clocks Enable During CSleep Mode"] - pub const fn lpuart1lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen { - let val = (self.0 >> 3usize) & 0x01; - super::vals::C1Apb4lpenrSyscfglpen(val as u8) - } - #[doc = "LPUART1 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_lpuart1lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); - } - #[doc = "SPI6 Peripheral Clocks Enable During CSleep Mode"] - pub const fn spi6lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen { - let val = (self.0 >> 5usize) & 0x01; - super::vals::C1Apb4lpenrSyscfglpen(val as u8) - } - #[doc = "SPI6 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_spi6lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); - } - #[doc = "I2C4 Peripheral Clocks Enable During CSleep Mode"] - pub const fn i2c4lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen { - let val = (self.0 >> 7usize) & 0x01; - super::vals::C1Apb4lpenrSyscfglpen(val as u8) - } - #[doc = "I2C4 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_i2c4lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); - } - #[doc = "LPTIM2 Peripheral Clocks Enable During CSleep Mode"] - pub const fn lptim2lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen { - let val = (self.0 >> 9usize) & 0x01; - super::vals::C1Apb4lpenrSyscfglpen(val as u8) + #[doc = "Bank 1 lowest PCROP protected address configuration"] + pub fn set_prot_area_start(&mut self, val: u16) { + self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize); } - #[doc = "LPTIM2 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_lptim2lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + #[doc = "Bank 1 highest PCROP protected address configuration"] + pub const fn prot_area_end(&self) -> u16 { + let val = (self.0 >> 16usize) & 0x0fff; + val as u16 } - #[doc = "LPTIM3 Peripheral Clocks Enable During CSleep Mode"] - pub const fn lptim3lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen { - let val = (self.0 >> 10usize) & 0x01; - super::vals::C1Apb4lpenrSyscfglpen(val as u8) + #[doc = "Bank 1 highest PCROP protected address configuration"] + pub fn set_prot_area_end(&mut self, val: u16) { + self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize); } - #[doc = "LPTIM3 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_lptim3lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); + #[doc = "Bank 1 PCROP protected erase enable option configuration bit"] + pub const fn dmep(&self) -> bool { + let val = (self.0 >> 31usize) & 0x01; + val != 0 } - #[doc = "LPTIM4 Peripheral Clocks Enable During CSleep Mode"] - pub const fn lptim4lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen { - let val = (self.0 >> 11usize) & 0x01; - super::vals::C1Apb4lpenrSyscfglpen(val as u8) + #[doc = "Bank 1 PCROP protected erase enable option configuration bit"] + pub fn set_dmep(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize); } - #[doc = "LPTIM4 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_lptim4lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); + } + impl Default for PrarPrg { + fn default() -> PrarPrg { + PrarPrg(0) } - #[doc = "LPTIM5 Peripheral Clocks Enable During CSleep Mode"] - pub const fn lptim5lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen { - let val = (self.0 >> 12usize) & 0x01; - super::vals::C1Apb4lpenrSyscfglpen(val as u8) + } + #[doc = "FLASH key register for bank 1"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Keyr(pub u32); + impl Keyr { + #[doc = "Bank 1 access configuration unlock key"] + pub const fn keyr(&self) -> u32 { + let val = (self.0 >> 0usize) & 0xffff_ffff; + val as u32 } - #[doc = "LPTIM5 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_lptim5lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); + #[doc = "Bank 1 access configuration unlock key"] + pub fn set_keyr(&mut self, val: u32) { + self.0 = + (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); } - #[doc = "COMP1/2 peripheral clock enable during CSleep mode"] - pub const fn comp12lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen { - let val = (self.0 >> 14usize) & 0x01; - super::vals::C1Apb4lpenrSyscfglpen(val as u8) + } + impl Default for Keyr { + fn default() -> Keyr { + Keyr(0) } - #[doc = "COMP1/2 peripheral clock enable during CSleep mode"] - pub fn set_comp12lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); + } + #[doc = "FLASH option control register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Optcr(pub u32); + impl Optcr { + #[doc = "FLASH_OPTCR lock option configuration bit"] + pub const fn optlock(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 } - #[doc = "VREF peripheral clock enable during CSleep mode"] - pub const fn vreflpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen { - let val = (self.0 >> 15usize) & 0x01; - super::vals::C1Apb4lpenrSyscfglpen(val as u8) + #[doc = "FLASH_OPTCR lock option configuration bit"] + pub fn set_optlock(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "VREF peripheral clock enable during CSleep mode"] - pub fn set_vreflpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + #[doc = "Option byte start change option configuration bit"] + pub const fn optstart(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; + val != 0 } - #[doc = "RTC APB Clock Enable During CSleep Mode"] - pub const fn rtcapblpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen { - let val = (self.0 >> 16usize) & 0x01; - super::vals::C1Apb4lpenrSyscfglpen(val as u8) + #[doc = "Option byte start change option configuration bit"] + pub fn set_optstart(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - #[doc = "RTC APB Clock Enable During CSleep Mode"] - pub fn set_rtcapblpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + #[doc = "Flash mass erase enable bit"] + pub const fn mer(&self) -> bool { + let val = (self.0 >> 4usize) & 0x01; + val != 0 } - #[doc = "SAI4 Peripheral Clocks Enable During CSleep Mode"] - pub const fn sai4lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen { - let val = (self.0 >> 21usize) & 0x01; - super::vals::C1Apb4lpenrSyscfglpen(val as u8) + #[doc = "Flash mass erase enable bit"] + pub fn set_mer(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); } - #[doc = "SAI4 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_sai4lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); + #[doc = "Option byte change error interrupt enable bit"] + pub const fn optchangeerrie(&self) -> bool { + let val = (self.0 >> 30usize) & 0x01; + val != 0 } - } - impl Default for C1Apb4lpenr { - fn default() -> C1Apb4lpenr { - C1Apb4lpenr(0) + #[doc = "Option byte change error interrupt enable bit"] + pub fn set_optchangeerrie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 30usize)) | (((val as u32) & 0x01) << 30usize); } - } - #[doc = "RCC APB3 Peripheral Reset Register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Apb3rstr(pub u32); - impl Apb3rstr { - #[doc = "LTDC block reset"] - pub const fn ltdcrst(&self) -> super::vals::Ltdcrst { - let val = (self.0 >> 3usize) & 0x01; - super::vals::Ltdcrst(val as u8) + #[doc = "Bank swapping configuration bit"] + pub const fn swap_bank(&self) -> bool { + let val = (self.0 >> 31usize) & 0x01; + val != 0 } - #[doc = "LTDC block reset"] - pub fn set_ltdcrst(&mut self, val: super::vals::Ltdcrst) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); + #[doc = "Bank swapping configuration bit"] + pub fn set_swap_bank(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize); } } - impl Default for Apb3rstr { - fn default() -> Apb3rstr { - Apb3rstr(0) + impl Default for Optcr { + fn default() -> Optcr { + Optcr(0) } } - #[doc = "RCC Reset Status Register"] + #[doc = "FLASH CRC control register for bank 1"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Rsr(pub u32); - impl Rsr { - #[doc = "Remove reset flag"] - pub const fn rmvf(&self) -> super::vals::RsrRmvf { - let val = (self.0 >> 16usize) & 0x01; - super::vals::RsrRmvf(val as u8) + pub struct Crccr(pub u32); + impl Crccr { + #[doc = "Bank 1 CRC sector number"] + pub const fn crc_sect(&self) -> u8 { + let val = (self.0 >> 0usize) & 0x07; + val as u8 } - #[doc = "Remove reset flag"] - pub fn set_rmvf(&mut self, val: super::vals::RsrRmvf) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + #[doc = "Bank 1 CRC sector number"] + pub fn set_crc_sect(&mut self, val: u8) { + self.0 = (self.0 & !(0x07 << 0usize)) | (((val as u32) & 0x07) << 0usize); } - #[doc = "CPU reset flag"] - pub const fn cpurstf(&self) -> bool { - let val = (self.0 >> 17usize) & 0x01; + #[doc = "Bank 1 CRC select bit"] + pub const fn all_bank(&self) -> bool { + let val = (self.0 >> 7usize) & 0x01; val != 0 } - #[doc = "CPU reset flag"] - pub fn set_cpurstf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); + #[doc = "Bank 1 CRC select bit"] + pub fn set_all_bank(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); } - #[doc = "D1 domain power switch reset flag"] - pub const fn d1rstf(&self) -> bool { - let val = (self.0 >> 19usize) & 0x01; + #[doc = "Bank 1 CRC sector mode select bit"] + pub const fn crc_by_sect(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; val != 0 } - #[doc = "D1 domain power switch reset flag"] - pub fn set_d1rstf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize); + #[doc = "Bank 1 CRC sector mode select bit"] + pub fn set_crc_by_sect(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); } - #[doc = "D2 domain power switch reset flag"] - pub const fn d2rstf(&self) -> bool { - let val = (self.0 >> 20usize) & 0x01; + #[doc = "Bank 1 CRC sector select bit"] + pub const fn add_sect(&self) -> bool { + let val = (self.0 >> 9usize) & 0x01; val != 0 } - #[doc = "D2 domain power switch reset flag"] - pub fn set_d2rstf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize); + #[doc = "Bank 1 CRC sector select bit"] + pub fn set_add_sect(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); } - #[doc = "BOR reset flag"] - pub const fn borrstf(&self) -> bool { - let val = (self.0 >> 21usize) & 0x01; + #[doc = "Bank 1 CRC sector list clear bit"] + pub const fn clean_sect(&self) -> bool { + let val = (self.0 >> 10usize) & 0x01; val != 0 } - #[doc = "BOR reset flag"] - pub fn set_borrstf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); - } - #[doc = "Pin reset flag (NRST)"] - pub const fn pinrstf(&self) -> bool { - let val = (self.0 >> 22usize) & 0x01; - val != 0 - } - #[doc = "Pin reset flag (NRST)"] - pub fn set_pinrstf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); + #[doc = "Bank 1 CRC sector list clear bit"] + pub fn set_clean_sect(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); } - #[doc = "POR/PDR reset flag"] - pub const fn porrstf(&self) -> bool { - let val = (self.0 >> 23usize) & 0x01; + #[doc = "Bank 1 CRC start bit"] + pub const fn start_crc(&self) -> bool { + let val = (self.0 >> 16usize) & 0x01; val != 0 } - #[doc = "POR/PDR reset flag"] - pub fn set_porrstf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize); + #[doc = "Bank 1 CRC start bit"] + pub fn set_start_crc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); } - #[doc = "System reset from CPU reset flag"] - pub const fn sftrstf(&self) -> bool { - let val = (self.0 >> 24usize) & 0x01; + #[doc = "Bank 1 CRC clear bit"] + pub const fn clean_crc(&self) -> bool { + let val = (self.0 >> 17usize) & 0x01; val != 0 } - #[doc = "System reset from CPU reset flag"] - pub fn set_sftrstf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize); - } - #[doc = "Independent Watchdog reset flag"] - pub const fn iwdg1rstf(&self) -> bool { - let val = (self.0 >> 26usize) & 0x01; - val != 0 + #[doc = "Bank 1 CRC clear bit"] + pub fn set_clean_crc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); } - #[doc = "Independent Watchdog reset flag"] - pub fn set_iwdg1rstf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); + #[doc = "Bank 1 CRC burst size"] + pub const fn crc_burst(&self) -> u8 { + let val = (self.0 >> 20usize) & 0x03; + val as u8 } - #[doc = "Window Watchdog reset flag"] - pub const fn wwdg1rstf(&self) -> bool { - let val = (self.0 >> 28usize) & 0x01; - val != 0 + #[doc = "Bank 1 CRC burst size"] + pub fn set_crc_burst(&mut self, val: u8) { + self.0 = (self.0 & !(0x03 << 20usize)) | (((val as u32) & 0x03) << 20usize); } - #[doc = "Window Watchdog reset flag"] - pub fn set_wwdg1rstf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize); + } + impl Default for Crccr { + fn default() -> Crccr { + Crccr(0) } - #[doc = "Reset due to illegal D1 DStandby or CPU CStop flag"] - pub const fn lpwrrstf(&self) -> bool { - let val = (self.0 >> 30usize) & 0x01; - val != 0 + } + #[doc = "FLASH write sector protection for bank 1"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct WpsnPrgr(pub u32); + impl WpsnPrgr { + #[doc = "Bank 1 sector write protection configuration byte"] + pub const fn wrpsn(&self) -> u8 { + let val = (self.0 >> 0usize) & 0xff; + val as u8 } - #[doc = "Reset due to illegal D1 DStandby or CPU CStop flag"] - pub fn set_lpwrrstf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 30usize)) | (((val as u32) & 0x01) << 30usize); + #[doc = "Bank 1 sector write protection configuration byte"] + pub fn set_wrpsn(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize); } } - impl Default for Rsr { - fn default() -> Rsr { - Rsr(0) + impl Default for WpsnPrgr { + fn default() -> WpsnPrgr { + WpsnPrgr(0) } } - #[doc = "RCC APB4 Peripheral Reset Register"] + #[doc = "FLASH option status register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Apb4rstr(pub u32); - impl Apb4rstr { - #[doc = "SYSCFG block reset"] - pub const fn syscfgrst(&self) -> super::vals::Syscfgrst { - let val = (self.0 >> 1usize) & 0x01; - super::vals::Syscfgrst(val as u8) + pub struct OptsrPrg(pub u32); + impl OptsrPrg { + #[doc = "BOR reset level option configuration bits"] + pub const fn bor_lev(&self) -> u8 { + let val = (self.0 >> 2usize) & 0x03; + val as u8 } - #[doc = "SYSCFG block reset"] - pub fn set_syscfgrst(&mut self, val: super::vals::Syscfgrst) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + #[doc = "BOR reset level option configuration bits"] + pub fn set_bor_lev(&mut self, val: u8) { + self.0 = (self.0 & !(0x03 << 2usize)) | (((val as u32) & 0x03) << 2usize); } - #[doc = "LPUART1 block reset"] - pub const fn lpuart1rst(&self) -> super::vals::Syscfgrst { - let val = (self.0 >> 3usize) & 0x01; - super::vals::Syscfgrst(val as u8) + #[doc = "IWDG1 option configuration bit"] + pub const fn iwdg1_hw(&self) -> bool { + let val = (self.0 >> 4usize) & 0x01; + val != 0 } - #[doc = "LPUART1 block reset"] - pub fn set_lpuart1rst(&mut self, val: super::vals::Syscfgrst) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); + #[doc = "IWDG1 option configuration bit"] + pub fn set_iwdg1_hw(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); } - #[doc = "SPI6 block reset"] - pub const fn spi6rst(&self) -> super::vals::Syscfgrst { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Syscfgrst(val as u8) + #[doc = "Option byte erase after D1 DStop option configuration bit"] + pub const fn n_rst_stop_d1(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 } - #[doc = "SPI6 block reset"] - pub fn set_spi6rst(&mut self, val: super::vals::Syscfgrst) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + #[doc = "Option byte erase after D1 DStop option configuration bit"] + pub fn set_n_rst_stop_d1(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - #[doc = "I2C4 block reset"] - pub const fn i2c4rst(&self) -> super::vals::Syscfgrst { + #[doc = "Option byte erase after D1 DStandby option configuration bit"] + pub const fn n_rst_stby_d1(&self) -> bool { let val = (self.0 >> 7usize) & 0x01; - super::vals::Syscfgrst(val as u8) + val != 0 } - #[doc = "I2C4 block reset"] - pub fn set_i2c4rst(&mut self, val: super::vals::Syscfgrst) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); + #[doc = "Option byte erase after D1 DStandby option configuration bit"] + pub fn set_n_rst_stby_d1(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); } - #[doc = "LPTIM2 block reset"] - pub const fn lptim2rst(&self) -> super::vals::Syscfgrst { - let val = (self.0 >> 9usize) & 0x01; - super::vals::Syscfgrst(val as u8) + #[doc = "Readout protection level option configuration byte"] + pub const fn rdp(&self) -> u8 { + let val = (self.0 >> 8usize) & 0xff; + val as u8 } - #[doc = "LPTIM2 block reset"] - pub fn set_lptim2rst(&mut self, val: super::vals::Syscfgrst) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + #[doc = "Readout protection level option configuration byte"] + pub fn set_rdp(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 8usize)) | (((val as u32) & 0xff) << 8usize); } - #[doc = "LPTIM3 block reset"] - pub const fn lptim3rst(&self) -> super::vals::Syscfgrst { - let val = (self.0 >> 10usize) & 0x01; - super::vals::Syscfgrst(val as u8) + #[doc = "IWDG Stop mode freeze option configuration bit"] + pub const fn fz_iwdg_stop(&self) -> bool { + let val = (self.0 >> 17usize) & 0x01; + val != 0 } - #[doc = "LPTIM3 block reset"] - pub fn set_lptim3rst(&mut self, val: super::vals::Syscfgrst) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); + #[doc = "IWDG Stop mode freeze option configuration bit"] + pub fn set_fz_iwdg_stop(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); } - #[doc = "LPTIM4 block reset"] - pub const fn lptim4rst(&self) -> super::vals::Syscfgrst { - let val = (self.0 >> 11usize) & 0x01; - super::vals::Syscfgrst(val as u8) + #[doc = "IWDG Standby mode freeze option configuration bit"] + pub const fn fz_iwdg_sdby(&self) -> bool { + let val = (self.0 >> 18usize) & 0x01; + val != 0 } - #[doc = "LPTIM4 block reset"] - pub fn set_lptim4rst(&mut self, val: super::vals::Syscfgrst) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); + #[doc = "IWDG Standby mode freeze option configuration bit"] + pub fn set_fz_iwdg_sdby(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize); } - #[doc = "LPTIM5 block reset"] - pub const fn lptim5rst(&self) -> super::vals::Syscfgrst { - let val = (self.0 >> 12usize) & 0x01; - super::vals::Syscfgrst(val as u8) + #[doc = "DTCM size select option configuration bits"] + pub const fn st_ram_size(&self) -> u8 { + let val = (self.0 >> 19usize) & 0x03; + val as u8 } - #[doc = "LPTIM5 block reset"] - pub fn set_lptim5rst(&mut self, val: super::vals::Syscfgrst) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); + #[doc = "DTCM size select option configuration bits"] + pub fn set_st_ram_size(&mut self, val: u8) { + self.0 = (self.0 & !(0x03 << 19usize)) | (((val as u32) & 0x03) << 19usize); } - #[doc = "COMP12 Blocks Reset"] - pub const fn comp12rst(&self) -> super::vals::Syscfgrst { - let val = (self.0 >> 14usize) & 0x01; - super::vals::Syscfgrst(val as u8) + #[doc = "Security option configuration bit"] + pub const fn security(&self) -> bool { + let val = (self.0 >> 21usize) & 0x01; + val != 0 } - #[doc = "COMP12 Blocks Reset"] - pub fn set_comp12rst(&mut self, val: super::vals::Syscfgrst) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); + #[doc = "Security option configuration bit"] + pub fn set_security(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); } - #[doc = "VREF block reset"] - pub const fn vrefrst(&self) -> super::vals::Syscfgrst { - let val = (self.0 >> 15usize) & 0x01; - super::vals::Syscfgrst(val as u8) + #[doc = "User option configuration bit 1"] + pub const fn rss1(&self) -> bool { + let val = (self.0 >> 26usize) & 0x01; + val != 0 } - #[doc = "VREF block reset"] - pub fn set_vrefrst(&mut self, val: super::vals::Syscfgrst) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + #[doc = "User option configuration bit 1"] + pub fn set_rss1(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); } - #[doc = "SAI4 block reset"] - pub const fn sai4rst(&self) -> super::vals::Syscfgrst { - let val = (self.0 >> 21usize) & 0x01; - super::vals::Syscfgrst(val as u8) + #[doc = "User option configuration bit 2"] + pub const fn rss2(&self) -> bool { + let val = (self.0 >> 27usize) & 0x01; + val != 0 } - #[doc = "SAI4 block reset"] - pub fn set_sai4rst(&mut self, val: super::vals::Syscfgrst) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); + #[doc = "User option configuration bit 2"] + pub fn set_rss2(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize); } - } - impl Default for Apb4rstr { - fn default() -> Apb4rstr { - Apb4rstr(0) + #[doc = "I/O high-speed at low-voltage (PRODUCT_BELOW_25V)"] + pub const fn io_hslv(&self) -> bool { + let val = (self.0 >> 29usize) & 0x01; + val != 0 } - } - #[doc = "RCC Reset Status Register"] - #[repr(transparent)] + #[doc = "I/O high-speed at low-voltage (PRODUCT_BELOW_25V)"] + pub fn set_io_hslv(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 29usize)) | (((val as u32) & 0x01) << 29usize); + } + #[doc = "Bank swapping option configuration bit"] + pub const fn swap_bank_opt(&self) -> bool { + let val = (self.0 >> 31usize) & 0x01; + val != 0 + } + #[doc = "Bank swapping option configuration bit"] + pub fn set_swap_bank_opt(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize); + } + } + impl Default for OptsrPrg { + fn default() -> OptsrPrg { + OptsrPrg(0) + } + } + #[doc = "Access control register"] + #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct C1Rsr(pub u32); - impl C1Rsr { - #[doc = "Remove reset flag"] - pub const fn rmvf(&self) -> super::vals::C1RsrRmvf { + pub struct Acr(pub u32); + impl Acr { + #[doc = "Read latency"] + pub const fn latency(&self) -> u8 { + let val = (self.0 >> 0usize) & 0x07; + val as u8 + } + #[doc = "Read latency"] + pub fn set_latency(&mut self, val: u8) { + self.0 = (self.0 & !(0x07 << 0usize)) | (((val as u32) & 0x07) << 0usize); + } + #[doc = "Flash signal delay"] + pub const fn wrhighfreq(&self) -> u8 { + let val = (self.0 >> 4usize) & 0x03; + val as u8 + } + #[doc = "Flash signal delay"] + pub fn set_wrhighfreq(&mut self, val: u8) { + self.0 = (self.0 & !(0x03 << 4usize)) | (((val as u32) & 0x03) << 4usize); + } + } + impl Default for Acr { + fn default() -> Acr { + Acr(0) + } + } + #[doc = "FLASH control register for bank 1"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Cr(pub u32); + impl Cr { + #[doc = "Bank 1 configuration lock bit"] + pub const fn lock(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 + } + #[doc = "Bank 1 configuration lock bit"] + pub fn set_lock(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + } + #[doc = "Bank 1 program enable bit"] + pub const fn pg(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; + val != 0 + } + #[doc = "Bank 1 program enable bit"] + pub fn set_pg(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + } + #[doc = "Bank 1 sector erase request"] + pub const fn ser(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; + val != 0 + } + #[doc = "Bank 1 sector erase request"] + pub fn set_ser(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); + } + #[doc = "Bank 1 erase request"] + pub const fn ber(&self) -> bool { + let val = (self.0 >> 3usize) & 0x01; + val != 0 + } + #[doc = "Bank 1 erase request"] + pub fn set_ber(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); + } + #[doc = "Bank 1 program size"] + pub const fn psize(&self) -> u8 { + let val = (self.0 >> 4usize) & 0x03; + val as u8 + } + #[doc = "Bank 1 program size"] + pub fn set_psize(&mut self, val: u8) { + self.0 = (self.0 & !(0x03 << 4usize)) | (((val as u32) & 0x03) << 4usize); + } + #[doc = "Bank 1 write forcing control bit"] + pub const fn fw(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 + } + #[doc = "Bank 1 write forcing control bit"] + pub fn set_fw(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + } + #[doc = "Bank 1 bank or sector erase start control bit"] + pub const fn start(&self) -> bool { + let val = (self.0 >> 7usize) & 0x01; + val != 0 + } + #[doc = "Bank 1 bank or sector erase start control bit"] + pub fn set_start(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + } + #[doc = "Bank 1 sector erase selection number"] + pub const fn snb(&self) -> u8 { + let val = (self.0 >> 8usize) & 0x07; + val as u8 + } + #[doc = "Bank 1 sector erase selection number"] + pub fn set_snb(&mut self, val: u8) { + self.0 = (self.0 & !(0x07 << 8usize)) | (((val as u32) & 0x07) << 8usize); + } + #[doc = "Bank 1 CRC control bit"] + pub const fn crc_en(&self) -> bool { + let val = (self.0 >> 15usize) & 0x01; + val != 0 + } + #[doc = "Bank 1 CRC control bit"] + pub fn set_crc_en(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); + } + #[doc = "Bank 1 end-of-program interrupt control bit"] + pub const fn eopie(&self) -> bool { let val = (self.0 >> 16usize) & 0x01; - super::vals::C1RsrRmvf(val as u8) + val != 0 } - #[doc = "Remove reset flag"] - pub fn set_rmvf(&mut self, val: super::vals::C1RsrRmvf) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + #[doc = "Bank 1 end-of-program interrupt control bit"] + pub fn set_eopie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); } - #[doc = "CPU reset flag"] - pub const fn cpurstf(&self) -> bool { + #[doc = "Bank 1 write protection error interrupt enable bit"] + pub const fn wrperrie(&self) -> bool { let val = (self.0 >> 17usize) & 0x01; val != 0 } - #[doc = "CPU reset flag"] - pub fn set_cpurstf(&mut self, val: bool) { + #[doc = "Bank 1 write protection error interrupt enable bit"] + pub fn set_wrperrie(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); } - #[doc = "D1 domain power switch reset flag"] - pub const fn d1rstf(&self) -> bool { - let val = (self.0 >> 19usize) & 0x01; + #[doc = "Bank 1 programming sequence error interrupt enable bit"] + pub const fn pgserrie(&self) -> bool { + let val = (self.0 >> 18usize) & 0x01; val != 0 } - #[doc = "D1 domain power switch reset flag"] - pub fn set_d1rstf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize); + #[doc = "Bank 1 programming sequence error interrupt enable bit"] + pub fn set_pgserrie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize); } - #[doc = "D2 domain power switch reset flag"] - pub const fn d2rstf(&self) -> bool { - let val = (self.0 >> 20usize) & 0x01; + #[doc = "Bank 1 strobe error interrupt enable bit"] + pub const fn strberrie(&self) -> bool { + let val = (self.0 >> 19usize) & 0x01; val != 0 } - #[doc = "D2 domain power switch reset flag"] - pub fn set_d2rstf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize); + #[doc = "Bank 1 strobe error interrupt enable bit"] + pub fn set_strberrie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize); } - #[doc = "BOR reset flag"] - pub const fn borrstf(&self) -> bool { + #[doc = "Bank 1 inconsistency error interrupt enable bit"] + pub const fn incerrie(&self) -> bool { let val = (self.0 >> 21usize) & 0x01; val != 0 } - #[doc = "BOR reset flag"] - pub fn set_borrstf(&mut self, val: bool) { + #[doc = "Bank 1 inconsistency error interrupt enable bit"] + pub fn set_incerrie(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); } - #[doc = "Pin reset flag (NRST)"] - pub const fn pinrstf(&self) -> bool { + #[doc = "Bank 1 write/erase error interrupt enable bit"] + pub const fn operrie(&self) -> bool { let val = (self.0 >> 22usize) & 0x01; val != 0 } - #[doc = "Pin reset flag (NRST)"] - pub fn set_pinrstf(&mut self, val: bool) { + #[doc = "Bank 1 write/erase error interrupt enable bit"] + pub fn set_operrie(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); } - #[doc = "POR/PDR reset flag"] - pub const fn porrstf(&self) -> bool { + #[doc = "Bank 1 read protection error interrupt enable bit"] + pub const fn rdperrie(&self) -> bool { let val = (self.0 >> 23usize) & 0x01; val != 0 } - #[doc = "POR/PDR reset flag"] - pub fn set_porrstf(&mut self, val: bool) { + #[doc = "Bank 1 read protection error interrupt enable bit"] + pub fn set_rdperrie(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize); } - #[doc = "System reset from CPU reset flag"] - pub const fn sftrstf(&self) -> bool { + #[doc = "Bank 1 secure error interrupt enable bit"] + pub const fn rdserrie(&self) -> bool { let val = (self.0 >> 24usize) & 0x01; val != 0 } - #[doc = "System reset from CPU reset flag"] - pub fn set_sftrstf(&mut self, val: bool) { + #[doc = "Bank 1 secure error interrupt enable bit"] + pub fn set_rdserrie(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize); } - #[doc = "Independent Watchdog reset flag"] - pub const fn iwdg1rstf(&self) -> bool { - let val = (self.0 >> 26usize) & 0x01; + #[doc = "Bank 1 ECC single correction error interrupt enable bit"] + pub const fn sneccerrie(&self) -> bool { + let val = (self.0 >> 25usize) & 0x01; val != 0 } - #[doc = "Independent Watchdog reset flag"] - pub fn set_iwdg1rstf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); + #[doc = "Bank 1 ECC single correction error interrupt enable bit"] + pub fn set_sneccerrie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize); } - #[doc = "Window Watchdog reset flag"] - pub const fn wwdg1rstf(&self) -> bool { - let val = (self.0 >> 28usize) & 0x01; + #[doc = "Bank 1 ECC double detection error interrupt enable bit"] + pub const fn dbeccerrie(&self) -> bool { + let val = (self.0 >> 26usize) & 0x01; val != 0 } - #[doc = "Window Watchdog reset flag"] - pub fn set_wwdg1rstf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize); + #[doc = "Bank 1 ECC double detection error interrupt enable bit"] + pub fn set_dbeccerrie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); } - #[doc = "Reset due to illegal D1 DStandby or CPU CStop flag"] - pub const fn lpwrrstf(&self) -> bool { - let val = (self.0 >> 30usize) & 0x01; + #[doc = "Bank 1 end of CRC calculation interrupt enable bit"] + pub const fn crcendie(&self) -> bool { + let val = (self.0 >> 27usize) & 0x01; val != 0 } - #[doc = "Reset due to illegal D1 DStandby or CPU CStop flag"] - pub fn set_lpwrrstf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 30usize)) | (((val as u32) & 0x01) << 30usize); + #[doc = "Bank 1 end of CRC calculation interrupt enable bit"] + pub fn set_crcendie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize); } } - impl Default for C1Rsr { - fn default() -> C1Rsr { - C1Rsr(0) + impl Default for Cr { + fn default() -> Cr { + Cr(0) } } - #[doc = "RCC PLLs Configuration Register"] + #[doc = "FLASH option status register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Pllcfgr(pub u32); - impl Pllcfgr { - #[doc = "PLL1 fractional latch enable"] - pub fn pllfracen(&self, n: usize) -> super::vals::Pll1fracen { - assert!(n < 3usize); - let offs = 0usize + n * 4usize; - let val = (self.0 >> offs) & 0x01; - super::vals::Pll1fracen(val as u8) - } - #[doc = "PLL1 fractional latch enable"] - pub fn set_pllfracen(&mut self, n: usize, val: super::vals::Pll1fracen) { - assert!(n < 3usize); - let offs = 0usize + n * 4usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); + pub struct OptsrCur(pub u32); + impl OptsrCur { + #[doc = "Option byte change ongoing flag"] + pub const fn opt_busy(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 } - #[doc = "PLL1 VCO selection"] - pub fn pllvcosel(&self, n: usize) -> super::vals::Pll1vcosel { - assert!(n < 3usize); - let offs = 1usize + n * 4usize; - let val = (self.0 >> offs) & 0x01; - super::vals::Pll1vcosel(val as u8) + #[doc = "Option byte change ongoing flag"] + pub fn set_opt_busy(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "PLL1 VCO selection"] - pub fn set_pllvcosel(&mut self, n: usize, val: super::vals::Pll1vcosel) { - assert!(n < 3usize); - let offs = 1usize + n * 4usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); + #[doc = "Brownout level option status bit"] + pub const fn bor_lev(&self) -> u8 { + let val = (self.0 >> 2usize) & 0x03; + val as u8 } - #[doc = "PLL1 input frequency range"] - pub fn pllrge(&self, n: usize) -> super::vals::Pll1rge { - assert!(n < 3usize); - let offs = 2usize + n * 4usize; - let val = (self.0 >> offs) & 0x03; - super::vals::Pll1rge(val as u8) + #[doc = "Brownout level option status bit"] + pub fn set_bor_lev(&mut self, val: u8) { + self.0 = (self.0 & !(0x03 << 2usize)) | (((val as u32) & 0x03) << 2usize); } - #[doc = "PLL1 input frequency range"] - pub fn set_pllrge(&mut self, n: usize, val: super::vals::Pll1rge) { - assert!(n < 3usize); - let offs = 2usize + n * 4usize; - self.0 = (self.0 & !(0x03 << offs)) | (((val.0 as u32) & 0x03) << offs); + #[doc = "IWDG1 control option status bit"] + pub const fn iwdg1_hw(&self) -> bool { + let val = (self.0 >> 4usize) & 0x01; + val != 0 } - #[doc = "PLL1 DIVP divider output enable"] - pub fn divpen(&self, n: usize) -> super::vals::Divp1en { - assert!(n < 3usize); - let offs = 16usize + n * 3usize; - let val = (self.0 >> offs) & 0x01; - super::vals::Divp1en(val as u8) + #[doc = "IWDG1 control option status bit"] + pub fn set_iwdg1_hw(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); } - #[doc = "PLL1 DIVP divider output enable"] - pub fn set_divpen(&mut self, n: usize, val: super::vals::Divp1en) { - assert!(n < 3usize); - let offs = 16usize + n * 3usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); + #[doc = "D1 DStop entry reset option status bit"] + pub const fn n_rst_stop_d1(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 } - #[doc = "PLL1 DIVQ divider output enable"] - pub fn divqen(&self, n: usize) -> super::vals::Divp1en { - assert!(n < 3usize); - let offs = 17usize + n * 3usize; - let val = (self.0 >> offs) & 0x01; - super::vals::Divp1en(val as u8) + #[doc = "D1 DStop entry reset option status bit"] + pub fn set_n_rst_stop_d1(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - #[doc = "PLL1 DIVQ divider output enable"] - pub fn set_divqen(&mut self, n: usize, val: super::vals::Divp1en) { - assert!(n < 3usize); - let offs = 17usize + n * 3usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); + #[doc = "D1 DStandby entry reset option status bit"] + pub const fn n_rst_stby_d1(&self) -> bool { + let val = (self.0 >> 7usize) & 0x01; + val != 0 } - #[doc = "PLL1 DIVR divider output enable"] - pub fn divren(&self, n: usize) -> super::vals::Divp1en { - assert!(n < 3usize); - let offs = 18usize + n * 3usize; - let val = (self.0 >> offs) & 0x01; - super::vals::Divp1en(val as u8) + #[doc = "D1 DStandby entry reset option status bit"] + pub fn set_n_rst_stby_d1(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); } - #[doc = "PLL1 DIVR divider output enable"] - pub fn set_divren(&mut self, n: usize, val: super::vals::Divp1en) { - assert!(n < 3usize); - let offs = 18usize + n * 3usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); + #[doc = "Readout protection level option status byte"] + pub const fn rdp(&self) -> u8 { + let val = (self.0 >> 8usize) & 0xff; + val as u8 } - } - impl Default for Pllcfgr { - fn default() -> Pllcfgr { - Pllcfgr(0) + #[doc = "Readout protection level option status byte"] + pub fn set_rdp(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 8usize)) | (((val as u32) & 0xff) << 8usize); } - } - #[doc = "RCC APB2 Peripheral Reset Register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Apb2rstr(pub u32); - impl Apb2rstr { - #[doc = "TIM1 block reset"] - pub const fn tim1rst(&self) -> super::vals::Tim1rst { - let val = (self.0 >> 0usize) & 0x01; - super::vals::Tim1rst(val as u8) + #[doc = "IWDG Stop mode freeze option status bit"] + pub const fn fz_iwdg_stop(&self) -> bool { + let val = (self.0 >> 17usize) & 0x01; + val != 0 } - #[doc = "TIM1 block reset"] - pub fn set_tim1rst(&mut self, val: super::vals::Tim1rst) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + #[doc = "IWDG Stop mode freeze option status bit"] + pub fn set_fz_iwdg_stop(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); } - #[doc = "TIM8 block reset"] - pub const fn tim8rst(&self) -> super::vals::Tim1rst { - let val = (self.0 >> 1usize) & 0x01; - super::vals::Tim1rst(val as u8) + #[doc = "IWDG Standby mode freeze option status bit"] + pub const fn fz_iwdg_sdby(&self) -> bool { + let val = (self.0 >> 18usize) & 0x01; + val != 0 } - #[doc = "TIM8 block reset"] - pub fn set_tim8rst(&mut self, val: super::vals::Tim1rst) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + #[doc = "IWDG Standby mode freeze option status bit"] + pub fn set_fz_iwdg_sdby(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize); } - #[doc = "USART1 block reset"] - pub const fn usart1rst(&self) -> super::vals::Tim1rst { - let val = (self.0 >> 4usize) & 0x01; - super::vals::Tim1rst(val as u8) + #[doc = "DTCM RAM size option status"] + pub const fn st_ram_size(&self) -> u8 { + let val = (self.0 >> 19usize) & 0x03; + val as u8 } - #[doc = "USART1 block reset"] - pub fn set_usart1rst(&mut self, val: super::vals::Tim1rst) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + #[doc = "DTCM RAM size option status"] + pub fn set_st_ram_size(&mut self, val: u8) { + self.0 = (self.0 & !(0x03 << 19usize)) | (((val as u32) & 0x03) << 19usize); } - #[doc = "USART6 block reset"] - pub const fn usart6rst(&self) -> super::vals::Tim1rst { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Tim1rst(val as u8) + #[doc = "Security enable option status bit"] + pub const fn security(&self) -> bool { + let val = (self.0 >> 21usize) & 0x01; + val != 0 } - #[doc = "USART6 block reset"] - pub fn set_usart6rst(&mut self, val: super::vals::Tim1rst) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + #[doc = "Security enable option status bit"] + pub fn set_security(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); } - #[doc = "SPI1 block reset"] - pub const fn spi1rst(&self) -> super::vals::Tim1rst { - let val = (self.0 >> 12usize) & 0x01; - super::vals::Tim1rst(val as u8) + #[doc = "User option bit 1"] + pub const fn rss1(&self) -> bool { + let val = (self.0 >> 26usize) & 0x01; + val != 0 } - #[doc = "SPI1 block reset"] - pub fn set_spi1rst(&mut self, val: super::vals::Tim1rst) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); + #[doc = "User option bit 1"] + pub fn set_rss1(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); } - #[doc = "SPI4 block reset"] - pub const fn spi4rst(&self) -> super::vals::Tim1rst { - let val = (self.0 >> 13usize) & 0x01; - super::vals::Tim1rst(val as u8) + #[doc = "Device personalization status bit"] + pub const fn perso_ok(&self) -> bool { + let val = (self.0 >> 28usize) & 0x01; + val != 0 } - #[doc = "SPI4 block reset"] - pub fn set_spi4rst(&mut self, val: super::vals::Tim1rst) { - self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize); + #[doc = "Device personalization status bit"] + pub fn set_perso_ok(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize); } - #[doc = "TIM15 block reset"] - pub const fn tim15rst(&self) -> super::vals::Tim1rst { - let val = (self.0 >> 16usize) & 0x01; - super::vals::Tim1rst(val as u8) + #[doc = "I/O high-speed at low-voltage status bit (PRODUCT_BELOW_25V)"] + pub const fn io_hslv(&self) -> bool { + let val = (self.0 >> 29usize) & 0x01; + val != 0 } - #[doc = "TIM15 block reset"] - pub fn set_tim15rst(&mut self, val: super::vals::Tim1rst) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + #[doc = "I/O high-speed at low-voltage status bit (PRODUCT_BELOW_25V)"] + pub fn set_io_hslv(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 29usize)) | (((val as u32) & 0x01) << 29usize); } - #[doc = "TIM16 block reset"] - pub const fn tim16rst(&self) -> super::vals::Tim1rst { - let val = (self.0 >> 17usize) & 0x01; - super::vals::Tim1rst(val as u8) + #[doc = "Option byte change error flag"] + pub const fn optchangeerr(&self) -> bool { + let val = (self.0 >> 30usize) & 0x01; + val != 0 } - #[doc = "TIM16 block reset"] - pub fn set_tim16rst(&mut self, val: super::vals::Tim1rst) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); + #[doc = "Option byte change error flag"] + pub fn set_optchangeerr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 30usize)) | (((val as u32) & 0x01) << 30usize); } - #[doc = "TIM17 block reset"] - pub const fn tim17rst(&self) -> super::vals::Tim1rst { - let val = (self.0 >> 18usize) & 0x01; - super::vals::Tim1rst(val as u8) + #[doc = "Bank swapping option status bit"] + pub const fn swap_bank_opt(&self) -> bool { + let val = (self.0 >> 31usize) & 0x01; + val != 0 } - #[doc = "TIM17 block reset"] - pub fn set_tim17rst(&mut self, val: super::vals::Tim1rst) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); + #[doc = "Bank swapping option status bit"] + pub fn set_swap_bank_opt(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize); } - #[doc = "SPI5 block reset"] - pub const fn spi5rst(&self) -> super::vals::Tim1rst { - let val = (self.0 >> 20usize) & 0x01; - super::vals::Tim1rst(val as u8) + } + impl Default for OptsrCur { + fn default() -> OptsrCur { + OptsrCur(0) } - #[doc = "SPI5 block reset"] - pub fn set_spi5rst(&mut self, val: super::vals::Tim1rst) { - self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize); + } + #[doc = "FLASH secure address for bank 1"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct ScarPrg(pub u32); + impl ScarPrg { + #[doc = "Bank 1 lowest secure protected address configuration"] + pub const fn sec_area_start(&self) -> u16 { + let val = (self.0 >> 0usize) & 0x0fff; + val as u16 } - #[doc = "SAI1 block reset"] - pub const fn sai1rst(&self) -> super::vals::Tim1rst { - let val = (self.0 >> 22usize) & 0x01; - super::vals::Tim1rst(val as u8) + #[doc = "Bank 1 lowest secure protected address configuration"] + pub fn set_sec_area_start(&mut self, val: u16) { + self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize); } - #[doc = "SAI1 block reset"] - pub fn set_sai1rst(&mut self, val: super::vals::Tim1rst) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); + #[doc = "Bank 1 highest secure protected address configuration"] + pub const fn sec_area_end(&self) -> u16 { + let val = (self.0 >> 16usize) & 0x0fff; + val as u16 } - #[doc = "SAI2 block reset"] - pub const fn sai2rst(&self) -> super::vals::Tim1rst { - let val = (self.0 >> 23usize) & 0x01; - super::vals::Tim1rst(val as u8) + #[doc = "Bank 1 highest secure protected address configuration"] + pub fn set_sec_area_end(&mut self, val: u16) { + self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize); } - #[doc = "SAI2 block reset"] - pub fn set_sai2rst(&mut self, val: super::vals::Tim1rst) { - self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize); + #[doc = "Bank 1 secure protected erase enable option configuration bit"] + pub const fn dmes(&self) -> bool { + let val = (self.0 >> 31usize) & 0x01; + val != 0 } - #[doc = "SAI3 block reset"] - pub const fn sai3rst(&self) -> super::vals::Tim1rst { - let val = (self.0 >> 24usize) & 0x01; - super::vals::Tim1rst(val as u8) + #[doc = "Bank 1 secure protected erase enable option configuration bit"] + pub fn set_dmes(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize); } - #[doc = "SAI3 block reset"] - pub fn set_sai3rst(&mut self, val: super::vals::Tim1rst) { - self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); + } + impl Default for ScarPrg { + fn default() -> ScarPrg { + ScarPrg(0) } - #[doc = "DFSDM1 block reset"] - pub const fn dfsdm1rst(&self) -> super::vals::Tim1rst { - let val = (self.0 >> 28usize) & 0x01; - super::vals::Tim1rst(val as u8) + } + #[doc = "FLASH option clear control register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Optccr(pub u32); + impl Optccr { + #[doc = "OPTCHANGEERR reset bit"] + pub const fn clr_optchangeerr(&self) -> bool { + let val = (self.0 >> 30usize) & 0x01; + val != 0 } - #[doc = "DFSDM1 block reset"] - pub fn set_dfsdm1rst(&mut self, val: super::vals::Tim1rst) { - self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); + #[doc = "OPTCHANGEERR reset bit"] + pub fn set_clr_optchangeerr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 30usize)) | (((val as u32) & 0x01) << 30usize); } - #[doc = "HRTIM block reset"] - pub const fn hrtimrst(&self) -> super::vals::Tim1rst { - let val = (self.0 >> 29usize) & 0x01; - super::vals::Tim1rst(val as u8) + } + impl Default for Optccr { + fn default() -> Optccr { + Optccr(0) } - #[doc = "HRTIM block reset"] - pub fn set_hrtimrst(&mut self, val: super::vals::Tim1rst) { - self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); + } + #[doc = "FLASH write sector protection for bank 1"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct WpsnCurr(pub u32); + impl WpsnCurr { + #[doc = "Bank 1 sector write protection option status byte"] + pub const fn wrpsn(&self) -> u8 { + let val = (self.0 >> 0usize) & 0xff; + val as u8 + } + #[doc = "Bank 1 sector write protection option status byte"] + pub fn set_wrpsn(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize); } } - impl Default for Apb2rstr { - fn default() -> Apb2rstr { - Apb2rstr(0) + impl Default for WpsnCurr { + fn default() -> WpsnCurr { + WpsnCurr(0) } } - #[doc = "RCC Domain 1 Kernel Clock Configuration Register"] + #[doc = "FLASH register with boot address"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct D1ccipr(pub u32); - impl D1ccipr { - #[doc = "FMC kernel clock source selection"] - pub const fn fmcsel(&self) -> super::vals::Fmcsel { - let val = (self.0 >> 0usize) & 0x03; - super::vals::Fmcsel(val as u8) - } - #[doc = "FMC kernel clock source selection"] - pub fn set_fmcsel(&mut self, val: super::vals::Fmcsel) { - self.0 = (self.0 & !(0x03 << 0usize)) | (((val.0 as u32) & 0x03) << 0usize); + pub struct BootPrgr(pub u32); + impl BootPrgr { + #[doc = "Boot address 0"] + pub const fn boot_add0(&self) -> u16 { + let val = (self.0 >> 0usize) & 0xffff; + val as u16 } - #[doc = "QUADSPI kernel clock source selection"] - pub const fn qspisel(&self) -> super::vals::Fmcsel { - let val = (self.0 >> 4usize) & 0x03; - super::vals::Fmcsel(val as u8) + #[doc = "Boot address 0"] + pub fn set_boot_add0(&mut self, val: u16) { + self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); } - #[doc = "QUADSPI kernel clock source selection"] - pub fn set_qspisel(&mut self, val: super::vals::Fmcsel) { - self.0 = (self.0 & !(0x03 << 4usize)) | (((val.0 as u32) & 0x03) << 4usize); + #[doc = "Boot address 1"] + pub const fn boot_add1(&self) -> u16 { + let val = (self.0 >> 16usize) & 0xffff; + val as u16 } - #[doc = "SDMMC kernel clock source selection"] - pub const fn sdmmcsel(&self) -> super::vals::Sdmmcsel { - let val = (self.0 >> 16usize) & 0x01; - super::vals::Sdmmcsel(val as u8) + #[doc = "Boot address 1"] + pub fn set_boot_add1(&mut self, val: u16) { + self.0 = (self.0 & !(0xffff << 16usize)) | (((val as u32) & 0xffff) << 16usize); } - #[doc = "SDMMC kernel clock source selection"] - pub fn set_sdmmcsel(&mut self, val: super::vals::Sdmmcsel) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + } + impl Default for BootPrgr { + fn default() -> BootPrgr { + BootPrgr(0) } - #[doc = "per_ck clock source selection"] - pub const fn ckpersel(&self) -> super::vals::Ckpersel { - let val = (self.0 >> 28usize) & 0x03; - super::vals::Ckpersel(val as u8) + } + #[doc = "FLASH CRC data register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Crcdatar(pub u32); + impl Crcdatar { + #[doc = "CRC result"] + pub const fn crc_data(&self) -> u32 { + let val = (self.0 >> 0usize) & 0xffff_ffff; + val as u32 } - #[doc = "per_ck clock source selection"] - pub fn set_ckpersel(&mut self, val: super::vals::Ckpersel) { - self.0 = (self.0 & !(0x03 << 28usize)) | (((val.0 as u32) & 0x03) << 28usize); + #[doc = "CRC result"] + pub fn set_crc_data(&mut self, val: u32) { + self.0 = + (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); } } - impl Default for D1ccipr { - fn default() -> D1ccipr { - D1ccipr(0) + impl Default for Crcdatar { + fn default() -> Crcdatar { + Crcdatar(0) } } - #[doc = "RCC APB4 Sleep Clock Register"] + #[doc = "FLASH option key register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Apb4lpenr(pub u32); - impl Apb4lpenr { - #[doc = "SYSCFG peripheral clock enable during CSleep mode"] - pub const fn syscfglpen(&self) -> super::vals::Apb4lpenrSyscfglpen { - let val = (self.0 >> 1usize) & 0x01; - super::vals::Apb4lpenrSyscfglpen(val as u8) + pub struct Optkeyr(pub u32); + impl Optkeyr { + #[doc = "Unlock key option bytes"] + pub const fn optkeyr(&self) -> u32 { + let val = (self.0 >> 0usize) & 0xffff_ffff; + val as u32 } - #[doc = "SYSCFG peripheral clock enable during CSleep mode"] - pub fn set_syscfglpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + #[doc = "Unlock key option bytes"] + pub fn set_optkeyr(&mut self, val: u32) { + self.0 = + (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); } - #[doc = "LPUART1 Peripheral Clocks Enable During CSleep Mode"] - pub const fn lpuart1lpen(&self) -> super::vals::Apb4lpenrSyscfglpen { - let val = (self.0 >> 3usize) & 0x01; - super::vals::Apb4lpenrSyscfglpen(val as u8) + } + impl Default for Optkeyr { + fn default() -> Optkeyr { + Optkeyr(0) } - #[doc = "LPUART1 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_lpuart1lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); + } + #[doc = "FLASH status register for bank 1"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Sr(pub u32); + impl Sr { + #[doc = "Bank 1 ongoing program flag"] + pub const fn bsy(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 } - #[doc = "SPI6 Peripheral Clocks Enable During CSleep Mode"] - pub const fn spi6lpen(&self) -> super::vals::Apb4lpenrSyscfglpen { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Apb4lpenrSyscfglpen(val as u8) + #[doc = "Bank 1 ongoing program flag"] + pub fn set_bsy(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "SPI6 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_spi6lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + #[doc = "Bank 1 write buffer not empty flag"] + pub const fn wbne(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; + val != 0 } - #[doc = "I2C4 Peripheral Clocks Enable During CSleep Mode"] - pub const fn i2c4lpen(&self) -> super::vals::Apb4lpenrSyscfglpen { - let val = (self.0 >> 7usize) & 0x01; - super::vals::Apb4lpenrSyscfglpen(val as u8) + #[doc = "Bank 1 write buffer not empty flag"] + pub fn set_wbne(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - #[doc = "I2C4 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_i2c4lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); + #[doc = "Bank 1 wait queue flag"] + pub const fn qw(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; + val != 0 } - #[doc = "LPTIM2 Peripheral Clocks Enable During CSleep Mode"] - pub const fn lptim2lpen(&self) -> super::vals::Apb4lpenrSyscfglpen { - let val = (self.0 >> 9usize) & 0x01; - super::vals::Apb4lpenrSyscfglpen(val as u8) + #[doc = "Bank 1 wait queue flag"] + pub fn set_qw(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); } - #[doc = "LPTIM2 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_lptim2lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + #[doc = "Bank 1 CRC busy flag"] + pub const fn crc_busy(&self) -> bool { + let val = (self.0 >> 3usize) & 0x01; + val != 0 } - #[doc = "LPTIM3 Peripheral Clocks Enable During CSleep Mode"] - pub const fn lptim3lpen(&self) -> super::vals::Apb4lpenrSyscfglpen { - let val = (self.0 >> 10usize) & 0x01; - super::vals::Apb4lpenrSyscfglpen(val as u8) + #[doc = "Bank 1 CRC busy flag"] + pub fn set_crc_busy(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); } - #[doc = "LPTIM3 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_lptim3lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); + #[doc = "Bank 1 end-of-program flag"] + pub const fn eop(&self) -> bool { + let val = (self.0 >> 16usize) & 0x01; + val != 0 } - #[doc = "LPTIM4 Peripheral Clocks Enable During CSleep Mode"] - pub const fn lptim4lpen(&self) -> super::vals::Apb4lpenrSyscfglpen { - let val = (self.0 >> 11usize) & 0x01; - super::vals::Apb4lpenrSyscfglpen(val as u8) + #[doc = "Bank 1 end-of-program flag"] + pub fn set_eop(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); } - #[doc = "LPTIM4 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_lptim4lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); + #[doc = "Bank 1 write protection error flag"] + pub const fn wrperr(&self) -> bool { + let val = (self.0 >> 17usize) & 0x01; + val != 0 } - #[doc = "LPTIM5 Peripheral Clocks Enable During CSleep Mode"] - pub const fn lptim5lpen(&self) -> super::vals::Apb4lpenrSyscfglpen { - let val = (self.0 >> 12usize) & 0x01; - super::vals::Apb4lpenrSyscfglpen(val as u8) + #[doc = "Bank 1 write protection error flag"] + pub fn set_wrperr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); } - #[doc = "LPTIM5 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_lptim5lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); + #[doc = "Bank 1 programming sequence error flag"] + pub const fn pgserr(&self) -> bool { + let val = (self.0 >> 18usize) & 0x01; + val != 0 } - #[doc = "COMP1/2 peripheral clock enable during CSleep mode"] - pub const fn comp12lpen(&self) -> super::vals::Apb4lpenrSyscfglpen { - let val = (self.0 >> 14usize) & 0x01; - super::vals::Apb4lpenrSyscfglpen(val as u8) + #[doc = "Bank 1 programming sequence error flag"] + pub fn set_pgserr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize); } - #[doc = "COMP1/2 peripheral clock enable during CSleep mode"] - pub fn set_comp12lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); + #[doc = "Bank 1 strobe error flag"] + pub const fn strberr(&self) -> bool { + let val = (self.0 >> 19usize) & 0x01; + val != 0 } - #[doc = "VREF peripheral clock enable during CSleep mode"] - pub const fn vreflpen(&self) -> super::vals::Apb4lpenrSyscfglpen { - let val = (self.0 >> 15usize) & 0x01; - super::vals::Apb4lpenrSyscfglpen(val as u8) + #[doc = "Bank 1 strobe error flag"] + pub fn set_strberr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize); } - #[doc = "VREF peripheral clock enable during CSleep mode"] - pub fn set_vreflpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + #[doc = "Bank 1 inconsistency error flag"] + pub const fn incerr(&self) -> bool { + let val = (self.0 >> 21usize) & 0x01; + val != 0 } - #[doc = "RTC APB Clock Enable During CSleep Mode"] - pub const fn rtcapblpen(&self) -> super::vals::Apb4lpenrSyscfglpen { - let val = (self.0 >> 16usize) & 0x01; - super::vals::Apb4lpenrSyscfglpen(val as u8) + #[doc = "Bank 1 inconsistency error flag"] + pub fn set_incerr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); } - #[doc = "RTC APB Clock Enable During CSleep Mode"] - pub fn set_rtcapblpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + #[doc = "Bank 1 write/erase error flag"] + pub const fn operr(&self) -> bool { + let val = (self.0 >> 22usize) & 0x01; + val != 0 } - #[doc = "SAI4 Peripheral Clocks Enable During CSleep Mode"] - pub const fn sai4lpen(&self) -> super::vals::Apb4lpenrSyscfglpen { - let val = (self.0 >> 21usize) & 0x01; - super::vals::Apb4lpenrSyscfglpen(val as u8) + #[doc = "Bank 1 write/erase error flag"] + pub fn set_operr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); } - #[doc = "SAI4 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_sai4lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); + #[doc = "Bank 1 read protection error flag"] + pub const fn rdperr(&self) -> bool { + let val = (self.0 >> 23usize) & 0x01; + val != 0 } - } - impl Default for Apb4lpenr { - fn default() -> Apb4lpenr { - Apb4lpenr(0) + #[doc = "Bank 1 read protection error flag"] + pub fn set_rdperr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize); } - } - #[doc = "RCC CSI configuration register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Csicfgr(pub u32); - impl Csicfgr { - #[doc = "CSI clock calibration"] - pub const fn csical(&self) -> u16 { - let val = (self.0 >> 0usize) & 0x01ff; - val as u16 + #[doc = "Bank 1 secure error flag"] + pub const fn rdserr(&self) -> bool { + let val = (self.0 >> 24usize) & 0x01; + val != 0 } - #[doc = "CSI clock calibration"] - pub fn set_csical(&mut self, val: u16) { - self.0 = (self.0 & !(0x01ff << 0usize)) | (((val as u32) & 0x01ff) << 0usize); + #[doc = "Bank 1 secure error flag"] + pub fn set_rdserr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize); } - #[doc = "CSI clock trimming"] - pub const fn csitrim(&self) -> u8 { - let val = (self.0 >> 24usize) & 0x3f; - val as u8 + #[doc = "Bank 1 single correction error flag"] + pub const fn sneccerr1(&self) -> bool { + let val = (self.0 >> 25usize) & 0x01; + val != 0 } - #[doc = "CSI clock trimming"] - pub fn set_csitrim(&mut self, val: u8) { - self.0 = (self.0 & !(0x3f << 24usize)) | (((val as u32) & 0x3f) << 24usize); + #[doc = "Bank 1 single correction error flag"] + pub fn set_sneccerr1(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize); + } + #[doc = "Bank 1 ECC double detection error flag"] + pub const fn dbeccerr(&self) -> bool { + let val = (self.0 >> 26usize) & 0x01; + val != 0 + } + #[doc = "Bank 1 ECC double detection error flag"] + pub fn set_dbeccerr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); + } + #[doc = "Bank 1 CRC-complete flag"] + pub const fn crcend(&self) -> bool { + let val = (self.0 >> 27usize) & 0x01; + val != 0 + } + #[doc = "Bank 1 CRC-complete flag"] + pub fn set_crcend(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize); } } - impl Default for Csicfgr { - fn default() -> Csicfgr { - Csicfgr(0) + impl Default for Sr { + fn default() -> Sr { + Sr(0) } } - #[doc = "RCC AHB3 Clock Register"] + #[doc = "FLASH clear control register for bank 1"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct C1Ahb3enr(pub u32); - impl C1Ahb3enr { - #[doc = "MDMA Peripheral Clock Enable"] - pub const fn mdmaen(&self) -> super::vals::C1Ahb3enrMdmaen { - let val = (self.0 >> 0usize) & 0x01; - super::vals::C1Ahb3enrMdmaen(val as u8) + pub struct Ccr(pub u32); + impl Ccr { + #[doc = "Bank 1 EOP1 flag clear bit"] + pub const fn clr_eop(&self) -> bool { + let val = (self.0 >> 16usize) & 0x01; + val != 0 } - #[doc = "MDMA Peripheral Clock Enable"] - pub fn set_mdmaen(&mut self, val: super::vals::C1Ahb3enrMdmaen) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + #[doc = "Bank 1 EOP1 flag clear bit"] + pub fn set_clr_eop(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); } - #[doc = "DMA2D Peripheral Clock Enable"] - pub const fn dma2den(&self) -> super::vals::C1Ahb3enrMdmaen { - let val = (self.0 >> 4usize) & 0x01; - super::vals::C1Ahb3enrMdmaen(val as u8) + #[doc = "Bank 1 WRPERR1 flag clear bit"] + pub const fn clr_wrperr(&self) -> bool { + let val = (self.0 >> 17usize) & 0x01; + val != 0 } - #[doc = "DMA2D Peripheral Clock Enable"] - pub fn set_dma2den(&mut self, val: super::vals::C1Ahb3enrMdmaen) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + #[doc = "Bank 1 WRPERR1 flag clear bit"] + pub fn set_clr_wrperr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); } - #[doc = "JPGDEC Peripheral Clock Enable"] - pub const fn jpgdecen(&self) -> super::vals::C1Ahb3enrMdmaen { - let val = (self.0 >> 5usize) & 0x01; - super::vals::C1Ahb3enrMdmaen(val as u8) + #[doc = "Bank 1 PGSERR1 flag clear bi"] + pub const fn clr_pgserr(&self) -> bool { + let val = (self.0 >> 18usize) & 0x01; + val != 0 } - #[doc = "JPGDEC Peripheral Clock Enable"] - pub fn set_jpgdecen(&mut self, val: super::vals::C1Ahb3enrMdmaen) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + #[doc = "Bank 1 PGSERR1 flag clear bi"] + pub fn set_clr_pgserr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize); } - #[doc = "FMC Peripheral Clocks Enable"] - pub const fn fmcen(&self) -> super::vals::C1Ahb3enrMdmaen { - let val = (self.0 >> 12usize) & 0x01; - super::vals::C1Ahb3enrMdmaen(val as u8) + #[doc = "Bank 1 STRBERR1 flag clear bit"] + pub const fn clr_strberr(&self) -> bool { + let val = (self.0 >> 19usize) & 0x01; + val != 0 } - #[doc = "FMC Peripheral Clocks Enable"] - pub fn set_fmcen(&mut self, val: super::vals::C1Ahb3enrMdmaen) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); + #[doc = "Bank 1 STRBERR1 flag clear bit"] + pub fn set_clr_strberr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize); } - #[doc = "QUADSPI and QUADSPI Delay Clock Enable"] - pub const fn qspien(&self) -> super::vals::C1Ahb3enrMdmaen { - let val = (self.0 >> 14usize) & 0x01; - super::vals::C1Ahb3enrMdmaen(val as u8) + #[doc = "Bank 1 INCERR1 flag clear bit"] + pub const fn clr_incerr(&self) -> bool { + let val = (self.0 >> 21usize) & 0x01; + val != 0 } - #[doc = "QUADSPI and QUADSPI Delay Clock Enable"] - pub fn set_qspien(&mut self, val: super::vals::C1Ahb3enrMdmaen) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); + #[doc = "Bank 1 INCERR1 flag clear bit"] + pub fn set_clr_incerr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); } - #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable"] - pub const fn sdmmc1en(&self) -> super::vals::C1Ahb3enrMdmaen { - let val = (self.0 >> 16usize) & 0x01; - super::vals::C1Ahb3enrMdmaen(val as u8) + #[doc = "Bank 1 OPERR1 flag clear bit"] + pub const fn clr_operr(&self) -> bool { + let val = (self.0 >> 22usize) & 0x01; + val != 0 } - #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable"] - pub fn set_sdmmc1en(&mut self, val: super::vals::C1Ahb3enrMdmaen) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); - } - } - impl Default for C1Ahb3enr { - fn default() -> C1Ahb3enr { - C1Ahb3enr(0) - } - } - #[doc = "RCC APB2 Sleep Clock Register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct C1Apb2lpenr(pub u32); - impl C1Apb2lpenr { - #[doc = "TIM1 peripheral clock enable during CSleep mode"] - pub const fn tim1lpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { - let val = (self.0 >> 0usize) & 0x01; - super::vals::C1Apb2lpenrTim1lpen(val as u8) - } - #[doc = "TIM1 peripheral clock enable during CSleep mode"] - pub fn set_tim1lpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); - } - #[doc = "TIM8 peripheral clock enable during CSleep mode"] - pub const fn tim8lpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { - let val = (self.0 >> 1usize) & 0x01; - super::vals::C1Apb2lpenrTim1lpen(val as u8) - } - #[doc = "TIM8 peripheral clock enable during CSleep mode"] - pub fn set_tim8lpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); - } - #[doc = "USART1 Peripheral Clocks Enable During CSleep Mode"] - pub const fn usart1lpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { - let val = (self.0 >> 4usize) & 0x01; - super::vals::C1Apb2lpenrTim1lpen(val as u8) + #[doc = "Bank 1 OPERR1 flag clear bit"] + pub fn set_clr_operr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); } - #[doc = "USART1 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_usart1lpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + #[doc = "Bank 1 RDPERR1 flag clear bit"] + pub const fn clr_rdperr(&self) -> bool { + let val = (self.0 >> 23usize) & 0x01; + val != 0 } - #[doc = "USART6 Peripheral Clocks Enable During CSleep Mode"] - pub const fn usart6lpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { - let val = (self.0 >> 5usize) & 0x01; - super::vals::C1Apb2lpenrTim1lpen(val as u8) + #[doc = "Bank 1 RDPERR1 flag clear bit"] + pub fn set_clr_rdperr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize); } - #[doc = "USART6 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_usart6lpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + #[doc = "Bank 1 RDSERR1 flag clear bit"] + pub const fn clr_rdserr(&self) -> bool { + let val = (self.0 >> 24usize) & 0x01; + val != 0 } - #[doc = "SPI1 Peripheral Clocks Enable During CSleep Mode"] - pub const fn spi1lpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { - let val = (self.0 >> 12usize) & 0x01; - super::vals::C1Apb2lpenrTim1lpen(val as u8) + #[doc = "Bank 1 RDSERR1 flag clear bit"] + pub fn set_clr_rdserr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize); } - #[doc = "SPI1 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_spi1lpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); + #[doc = "Bank 1 SNECCERR1 flag clear bit"] + pub const fn clr_sneccerr(&self) -> bool { + let val = (self.0 >> 25usize) & 0x01; + val != 0 } - #[doc = "SPI4 Peripheral Clocks Enable During CSleep Mode"] - pub const fn spi4lpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { - let val = (self.0 >> 13usize) & 0x01; - super::vals::C1Apb2lpenrTim1lpen(val as u8) + #[doc = "Bank 1 SNECCERR1 flag clear bit"] + pub fn set_clr_sneccerr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize); } - #[doc = "SPI4 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_spi4lpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize); + #[doc = "Bank 1 DBECCERR1 flag clear bit"] + pub const fn clr_dbeccerr(&self) -> bool { + let val = (self.0 >> 26usize) & 0x01; + val != 0 } - #[doc = "TIM15 peripheral clock enable during CSleep mode"] - pub const fn tim15lpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { - let val = (self.0 >> 16usize) & 0x01; - super::vals::C1Apb2lpenrTim1lpen(val as u8) + #[doc = "Bank 1 DBECCERR1 flag clear bit"] + pub fn set_clr_dbeccerr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); } - #[doc = "TIM15 peripheral clock enable during CSleep mode"] - pub fn set_tim15lpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + #[doc = "Bank 1 CRCEND1 flag clear bit"] + pub const fn clr_crcend(&self) -> bool { + let val = (self.0 >> 27usize) & 0x01; + val != 0 } - #[doc = "TIM16 peripheral clock enable during CSleep mode"] - pub const fn tim16lpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { - let val = (self.0 >> 17usize) & 0x01; - super::vals::C1Apb2lpenrTim1lpen(val as u8) + #[doc = "Bank 1 CRCEND1 flag clear bit"] + pub fn set_clr_crcend(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize); } - #[doc = "TIM16 peripheral clock enable during CSleep mode"] - pub fn set_tim16lpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); + } + impl Default for Ccr { + fn default() -> Ccr { + Ccr(0) } - #[doc = "TIM17 peripheral clock enable during CSleep mode"] - pub const fn tim17lpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { - let val = (self.0 >> 18usize) & 0x01; - super::vals::C1Apb2lpenrTim1lpen(val as u8) + } + #[doc = "FLASH register with boot address"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct BootCurr(pub u32); + impl BootCurr { + #[doc = "Boot address 0"] + pub const fn boot_add0(&self) -> u16 { + let val = (self.0 >> 0usize) & 0xffff; + val as u16 } - #[doc = "TIM17 peripheral clock enable during CSleep mode"] - pub fn set_tim17lpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); + #[doc = "Boot address 0"] + pub fn set_boot_add0(&mut self, val: u16) { + self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); } - #[doc = "SPI5 Peripheral Clocks Enable During CSleep Mode"] - pub const fn spi5lpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { - let val = (self.0 >> 20usize) & 0x01; - super::vals::C1Apb2lpenrTim1lpen(val as u8) + #[doc = "Boot address 1"] + pub const fn boot_add1(&self) -> u16 { + let val = (self.0 >> 16usize) & 0xffff; + val as u16 } - #[doc = "SPI5 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_spi5lpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize); + #[doc = "Boot address 1"] + pub fn set_boot_add1(&mut self, val: u16) { + self.0 = (self.0 & !(0xffff << 16usize)) | (((val as u32) & 0xffff) << 16usize); } - #[doc = "SAI1 Peripheral Clocks Enable During CSleep Mode"] - pub const fn sai1lpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { - let val = (self.0 >> 22usize) & 0x01; - super::vals::C1Apb2lpenrTim1lpen(val as u8) + } + impl Default for BootCurr { + fn default() -> BootCurr { + BootCurr(0) } - #[doc = "SAI1 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_sai1lpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); + } + #[doc = "FLASH secure address for bank 1"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct ScarCur(pub u32); + impl ScarCur { + #[doc = "Bank 1 lowest secure protected address"] + pub const fn sec_area_start(&self) -> u16 { + let val = (self.0 >> 0usize) & 0x0fff; + val as u16 } - #[doc = "SAI2 Peripheral Clocks Enable During CSleep Mode"] - pub const fn sai2lpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { - let val = (self.0 >> 23usize) & 0x01; - super::vals::C1Apb2lpenrTim1lpen(val as u8) + #[doc = "Bank 1 lowest secure protected address"] + pub fn set_sec_area_start(&mut self, val: u16) { + self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize); } - #[doc = "SAI2 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_sai2lpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize); + #[doc = "Bank 1 highest secure protected address"] + pub const fn sec_area_end(&self) -> u16 { + let val = (self.0 >> 16usize) & 0x0fff; + val as u16 } - #[doc = "SAI3 Peripheral Clocks Enable During CSleep Mode"] - pub const fn sai3lpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { - let val = (self.0 >> 24usize) & 0x01; - super::vals::C1Apb2lpenrTim1lpen(val as u8) + #[doc = "Bank 1 highest secure protected address"] + pub fn set_sec_area_end(&mut self, val: u16) { + self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize); } - #[doc = "SAI3 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_sai3lpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); + #[doc = "Bank 1 secure protected erase enable option status bit"] + pub const fn dmes(&self) -> bool { + let val = (self.0 >> 31usize) & 0x01; + val != 0 } - #[doc = "DFSDM1 Peripheral Clocks Enable During CSleep Mode"] - pub const fn dfsdm1lpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { - let val = (self.0 >> 28usize) & 0x01; - super::vals::C1Apb2lpenrTim1lpen(val as u8) + #[doc = "Bank 1 secure protected erase enable option status bit"] + pub fn set_dmes(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize); } - #[doc = "DFSDM1 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_dfsdm1lpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); + } + impl Default for ScarCur { + fn default() -> ScarCur { + ScarCur(0) } - #[doc = "HRTIM peripheral clock enable during CSleep mode"] - pub const fn hrtimlpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { - let val = (self.0 >> 29usize) & 0x01; - super::vals::C1Apb2lpenrTim1lpen(val as u8) + } + #[doc = "FLASH CRC end address register for bank 1"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Crceaddr(pub u32); + impl Crceaddr { + #[doc = "CRC end address on bank 1"] + pub const fn crc_end_addr(&self) -> u32 { + let val = (self.0 >> 0usize) & 0xffff_ffff; + val as u32 } - #[doc = "HRTIM peripheral clock enable during CSleep mode"] - pub fn set_hrtimlpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); + #[doc = "CRC end address on bank 1"] + pub fn set_crc_end_addr(&mut self, val: u32) { + self.0 = + (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); } } - impl Default for C1Apb2lpenr { - fn default() -> C1Apb2lpenr { - C1Apb2lpenr(0) + impl Default for Crceaddr { + fn default() -> Crceaddr { + Crceaddr(0) } } - #[doc = "RCC Domain 2 Kernel Clock Configuration Register"] + #[doc = "FLASH protection address for bank 1"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct D2ccip2r(pub u32); - impl D2ccip2r { - #[doc = "USART2/3, UART4,5, 7/8 (APB1) kernel clock source selection"] - pub const fn usart234578sel(&self) -> super::vals::Usart234578sel { - let val = (self.0 >> 0usize) & 0x07; - super::vals::Usart234578sel(val as u8) + pub struct PrarCur(pub u32); + impl PrarCur { + #[doc = "Bank 1 lowest PCROP protected address"] + pub const fn prot_area_start(&self) -> u16 { + let val = (self.0 >> 0usize) & 0x0fff; + val as u16 } - #[doc = "USART2/3, UART4,5, 7/8 (APB1) kernel clock source selection"] - pub fn set_usart234578sel(&mut self, val: super::vals::Usart234578sel) { - self.0 = (self.0 & !(0x07 << 0usize)) | (((val.0 as u32) & 0x07) << 0usize); - } - #[doc = "USART1 and 6 kernel clock source selection"] - pub const fn usart16sel(&self) -> super::vals::Usart16sel { - let val = (self.0 >> 3usize) & 0x07; - super::vals::Usart16sel(val as u8) - } - #[doc = "USART1 and 6 kernel clock source selection"] - pub fn set_usart16sel(&mut self, val: super::vals::Usart16sel) { - self.0 = (self.0 & !(0x07 << 3usize)) | (((val.0 as u32) & 0x07) << 3usize); - } - #[doc = "RNG kernel clock source selection"] - pub const fn rngsel(&self) -> super::vals::Rngsel { - let val = (self.0 >> 8usize) & 0x03; - super::vals::Rngsel(val as u8) - } - #[doc = "RNG kernel clock source selection"] - pub fn set_rngsel(&mut self, val: super::vals::Rngsel) { - self.0 = (self.0 & !(0x03 << 8usize)) | (((val.0 as u32) & 0x03) << 8usize); - } - #[doc = "I2C1,2,3 kernel clock source selection"] - pub const fn i2c123sel(&self) -> super::vals::I2c123sel { - let val = (self.0 >> 12usize) & 0x03; - super::vals::I2c123sel(val as u8) + #[doc = "Bank 1 lowest PCROP protected address"] + pub fn set_prot_area_start(&mut self, val: u16) { + self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize); } - #[doc = "I2C1,2,3 kernel clock source selection"] - pub fn set_i2c123sel(&mut self, val: super::vals::I2c123sel) { - self.0 = (self.0 & !(0x03 << 12usize)) | (((val.0 as u32) & 0x03) << 12usize); + #[doc = "Bank 1 highest PCROP protected address"] + pub const fn prot_area_end(&self) -> u16 { + let val = (self.0 >> 16usize) & 0x0fff; + val as u16 } - #[doc = "USBOTG 1 and 2 kernel clock source selection"] - pub const fn usbsel(&self) -> super::vals::Usbsel { - let val = (self.0 >> 20usize) & 0x03; - super::vals::Usbsel(val as u8) + #[doc = "Bank 1 highest PCROP protected address"] + pub fn set_prot_area_end(&mut self, val: u16) { + self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize); } - #[doc = "USBOTG 1 and 2 kernel clock source selection"] - pub fn set_usbsel(&mut self, val: super::vals::Usbsel) { - self.0 = (self.0 & !(0x03 << 20usize)) | (((val.0 as u32) & 0x03) << 20usize); + #[doc = "Bank 1 PCROP protected erase enable option status bit"] + pub const fn dmep(&self) -> bool { + let val = (self.0 >> 31usize) & 0x01; + val != 0 } - #[doc = "HDMI-CEC kernel clock source selection"] - pub const fn cecsel(&self) -> super::vals::Cecsel { - let val = (self.0 >> 22usize) & 0x03; - super::vals::Cecsel(val as u8) + #[doc = "Bank 1 PCROP protected erase enable option status bit"] + pub fn set_dmep(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize); } - #[doc = "HDMI-CEC kernel clock source selection"] - pub fn set_cecsel(&mut self, val: super::vals::Cecsel) { - self.0 = (self.0 & !(0x03 << 22usize)) | (((val.0 as u32) & 0x03) << 22usize); + } + impl Default for PrarCur { + fn default() -> PrarCur { + PrarCur(0) } - #[doc = "LPTIM1 kernel clock source selection"] - pub const fn lptim1sel(&self) -> super::vals::Lptim1sel { - let val = (self.0 >> 28usize) & 0x07; - super::vals::Lptim1sel(val as u8) + } + #[doc = "FLASH ECC fail address for bank 1"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Far(pub u32); + impl Far { + #[doc = "Bank 1 ECC error address"] + pub const fn fail_ecc_addr(&self) -> u16 { + let val = (self.0 >> 0usize) & 0x7fff; + val as u16 } - #[doc = "LPTIM1 kernel clock source selection"] - pub fn set_lptim1sel(&mut self, val: super::vals::Lptim1sel) { - self.0 = (self.0 & !(0x07 << 28usize)) | (((val.0 as u32) & 0x07) << 28usize); + #[doc = "Bank 1 ECC error address"] + pub fn set_fail_ecc_addr(&mut self, val: u16) { + self.0 = (self.0 & !(0x7fff << 0usize)) | (((val as u32) & 0x7fff) << 0usize); } } - impl Default for D2ccip2r { - fn default() -> D2ccip2r { - D2ccip2r(0) + impl Default for Far { + fn default() -> Far { + Far(0) } } - #[doc = "RCC APB2 Sleep Clock Register"] + } +} +pub mod syscfg_l4 { + use crate::generic::*; + #[doc = "System configuration controller"] + #[derive(Copy, Clone)] + pub struct Syscfg(pub *mut u8); + unsafe impl Send for Syscfg {} + unsafe impl Sync for Syscfg {} + impl Syscfg { + #[doc = "memory remap register"] + pub fn memrmp(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(0usize)) } + } + #[doc = "configuration register 1"] + pub fn cfgr1(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(4usize)) } + } + #[doc = "external interrupt configuration register 1"] + pub fn exticr(self, n: usize) -> Reg { + assert!(n < 4usize); + unsafe { Reg::from_ptr(self.0.add(8usize + n * 4usize)) } + } + #[doc = "SCSR"] + pub fn scsr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(24usize)) } + } + #[doc = "CFGR2"] + pub fn cfgr2(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(28usize)) } + } + #[doc = "SWPR"] + pub fn swpr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(32usize)) } + } + #[doc = "SKR"] + pub fn skr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(36usize)) } + } + } + pub mod regs { + use crate::generic::*; + #[doc = "CFGR2"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Apb2lpenr(pub u32); - impl Apb2lpenr { - #[doc = "TIM1 peripheral clock enable during CSleep mode"] - pub const fn tim1lpen(&self) -> super::vals::Apb2lpenrTim1lpen { + pub struct Cfgr2(pub u32); + impl Cfgr2 { + #[doc = "Cortex LOCKUP (Hardfault) output enable bit"] + pub const fn cll(&self) -> bool { let val = (self.0 >> 0usize) & 0x01; - super::vals::Apb2lpenrTim1lpen(val as u8) + val != 0 } - #[doc = "TIM1 peripheral clock enable during CSleep mode"] - pub fn set_tim1lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + #[doc = "Cortex LOCKUP (Hardfault) output enable bit"] + pub fn set_cll(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "TIM8 peripheral clock enable during CSleep mode"] - pub const fn tim8lpen(&self) -> super::vals::Apb2lpenrTim1lpen { + #[doc = "SRAM2 parity lock bit"] + pub const fn spl(&self) -> bool { let val = (self.0 >> 1usize) & 0x01; - super::vals::Apb2lpenrTim1lpen(val as u8) - } - #[doc = "TIM8 peripheral clock enable during CSleep mode"] - pub fn set_tim8lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + val != 0 } - #[doc = "USART1 Peripheral Clocks Enable During CSleep Mode"] - pub const fn usart1lpen(&self) -> super::vals::Apb2lpenrTim1lpen { - let val = (self.0 >> 4usize) & 0x01; - super::vals::Apb2lpenrTim1lpen(val as u8) + #[doc = "SRAM2 parity lock bit"] + pub fn set_spl(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - #[doc = "USART1 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_usart1lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + #[doc = "PVD lock enable bit"] + pub const fn pvdl(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; + val != 0 } - #[doc = "USART6 Peripheral Clocks Enable During CSleep Mode"] - pub const fn usart6lpen(&self) -> super::vals::Apb2lpenrTim1lpen { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Apb2lpenrTim1lpen(val as u8) + #[doc = "PVD lock enable bit"] + pub fn set_pvdl(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); } - #[doc = "USART6 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_usart6lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + #[doc = "ECC Lock"] + pub const fn eccl(&self) -> bool { + let val = (self.0 >> 3usize) & 0x01; + val != 0 } - #[doc = "SPI1 Peripheral Clocks Enable During CSleep Mode"] - pub const fn spi1lpen(&self) -> super::vals::Apb2lpenrTim1lpen { - let val = (self.0 >> 12usize) & 0x01; - super::vals::Apb2lpenrTim1lpen(val as u8) + #[doc = "ECC Lock"] + pub fn set_eccl(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); } - #[doc = "SPI1 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_spi1lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); + #[doc = "SRAM2 parity error flag"] + pub const fn spf(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 } - #[doc = "SPI4 Peripheral Clocks Enable During CSleep Mode"] - pub const fn spi4lpen(&self) -> super::vals::Apb2lpenrTim1lpen { - let val = (self.0 >> 13usize) & 0x01; - super::vals::Apb2lpenrTim1lpen(val as u8) + #[doc = "SRAM2 parity error flag"] + pub fn set_spf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); } - #[doc = "SPI4 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_spi4lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize); + } + impl Default for Cfgr2 { + fn default() -> Cfgr2 { + Cfgr2(0) } - #[doc = "TIM15 peripheral clock enable during CSleep mode"] - pub const fn tim15lpen(&self) -> super::vals::Apb2lpenrTim1lpen { - let val = (self.0 >> 16usize) & 0x01; - super::vals::Apb2lpenrTim1lpen(val as u8) + } + #[doc = "SKR"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Skr(pub u32); + impl Skr { + #[doc = "SRAM2 write protection key for software erase"] + pub const fn key(&self) -> u8 { + let val = (self.0 >> 0usize) & 0xff; + val as u8 } - #[doc = "TIM15 peripheral clock enable during CSleep mode"] - pub fn set_tim15lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + #[doc = "SRAM2 write protection key for software erase"] + pub fn set_key(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize); } - #[doc = "TIM16 peripheral clock enable during CSleep mode"] - pub const fn tim16lpen(&self) -> super::vals::Apb2lpenrTim1lpen { - let val = (self.0 >> 17usize) & 0x01; - super::vals::Apb2lpenrTim1lpen(val as u8) + } + impl Default for Skr { + fn default() -> Skr { + Skr(0) } - #[doc = "TIM16 peripheral clock enable during CSleep mode"] - pub fn set_tim16lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); + } + #[doc = "SWPR"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Swpr(pub u32); + impl Swpr { + #[doc = "SRAWM2 write protection."] + pub fn pwp(&self, n: usize) -> bool { + assert!(n < 32usize); + let offs = 0usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; + val != 0 } - #[doc = "TIM17 peripheral clock enable during CSleep mode"] - pub const fn tim17lpen(&self) -> super::vals::Apb2lpenrTim1lpen { - let val = (self.0 >> 18usize) & 0x01; - super::vals::Apb2lpenrTim1lpen(val as u8) - } - #[doc = "TIM17 peripheral clock enable during CSleep mode"] - pub fn set_tim17lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); - } - #[doc = "SPI5 Peripheral Clocks Enable During CSleep Mode"] - pub const fn spi5lpen(&self) -> super::vals::Apb2lpenrTim1lpen { - let val = (self.0 >> 20usize) & 0x01; - super::vals::Apb2lpenrTim1lpen(val as u8) - } - #[doc = "SPI5 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_spi5lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize); - } - #[doc = "SAI1 Peripheral Clocks Enable During CSleep Mode"] - pub const fn sai1lpen(&self) -> super::vals::Apb2lpenrTim1lpen { - let val = (self.0 >> 22usize) & 0x01; - super::vals::Apb2lpenrTim1lpen(val as u8) - } - #[doc = "SAI1 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_sai1lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); - } - #[doc = "SAI2 Peripheral Clocks Enable During CSleep Mode"] - pub const fn sai2lpen(&self) -> super::vals::Apb2lpenrTim1lpen { - let val = (self.0 >> 23usize) & 0x01; - super::vals::Apb2lpenrTim1lpen(val as u8) - } - #[doc = "SAI2 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_sai2lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize); - } - #[doc = "SAI3 Peripheral Clocks Enable During CSleep Mode"] - pub const fn sai3lpen(&self) -> super::vals::Apb2lpenrTim1lpen { - let val = (self.0 >> 24usize) & 0x01; - super::vals::Apb2lpenrTim1lpen(val as u8) + #[doc = "SRAWM2 write protection."] + pub fn set_pwp(&mut self, n: usize, val: bool) { + assert!(n < 32usize); + let offs = 0usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "SAI3 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_sai3lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); + } + impl Default for Swpr { + fn default() -> Swpr { + Swpr(0) } - #[doc = "DFSDM1 Peripheral Clocks Enable During CSleep Mode"] - pub const fn dfsdm1lpen(&self) -> super::vals::Apb2lpenrTim1lpen { - let val = (self.0 >> 28usize) & 0x01; - super::vals::Apb2lpenrTim1lpen(val as u8) + } + #[doc = "SCSR"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Scsr(pub u32); + impl Scsr { + #[doc = "SRAM2 Erase"] + pub const fn sram2er(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 } - #[doc = "DFSDM1 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_dfsdm1lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); + #[doc = "SRAM2 Erase"] + pub fn set_sram2er(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "HRTIM peripheral clock enable during CSleep mode"] - pub const fn hrtimlpen(&self) -> super::vals::Apb2lpenrTim1lpen { - let val = (self.0 >> 29usize) & 0x01; - super::vals::Apb2lpenrTim1lpen(val as u8) + #[doc = "SRAM2 busy by erase operation"] + pub const fn sram2bsy(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; + val != 0 } - #[doc = "HRTIM peripheral clock enable during CSleep mode"] - pub fn set_hrtimlpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { - self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); + #[doc = "SRAM2 busy by erase operation"] + pub fn set_sram2bsy(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } } - impl Default for Apb2lpenr { - fn default() -> Apb2lpenr { - Apb2lpenr(0) + impl Default for Scsr { + fn default() -> Scsr { + Scsr(0) } } - #[doc = "RCC APB1 Clock Register"] + #[doc = "memory remap register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct C1Apb1henr(pub u32); - impl C1Apb1henr { - #[doc = "Clock Recovery System peripheral clock enable"] - pub const fn crsen(&self) -> super::vals::C1Apb1henrCrsen { - let val = (self.0 >> 1usize) & 0x01; - super::vals::C1Apb1henrCrsen(val as u8) - } - #[doc = "Clock Recovery System peripheral clock enable"] - pub fn set_crsen(&mut self, val: super::vals::C1Apb1henrCrsen) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); - } - #[doc = "SWPMI Peripheral Clocks Enable"] - pub const fn swpen(&self) -> super::vals::C1Apb1henrCrsen { - let val = (self.0 >> 2usize) & 0x01; - super::vals::C1Apb1henrCrsen(val as u8) - } - #[doc = "SWPMI Peripheral Clocks Enable"] - pub fn set_swpen(&mut self, val: super::vals::C1Apb1henrCrsen) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); - } - #[doc = "OPAMP peripheral clock enable"] - pub const fn opampen(&self) -> super::vals::C1Apb1henrCrsen { - let val = (self.0 >> 4usize) & 0x01; - super::vals::C1Apb1henrCrsen(val as u8) + pub struct Memrmp(pub u32); + impl Memrmp { + #[doc = "Memory mapping selection"] + pub const fn mem_mode(&self) -> u8 { + let val = (self.0 >> 0usize) & 0x07; + val as u8 } - #[doc = "OPAMP peripheral clock enable"] - pub fn set_opampen(&mut self, val: super::vals::C1Apb1henrCrsen) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + #[doc = "Memory mapping selection"] + pub fn set_mem_mode(&mut self, val: u8) { + self.0 = (self.0 & !(0x07 << 0usize)) | (((val as u32) & 0x07) << 0usize); } - #[doc = "MDIOS peripheral clock enable"] - pub const fn mdiosen(&self) -> super::vals::C1Apb1henrCrsen { - let val = (self.0 >> 5usize) & 0x01; - super::vals::C1Apb1henrCrsen(val as u8) + #[doc = "QUADSPI memory mapping swap"] + pub const fn qfs(&self) -> bool { + let val = (self.0 >> 3usize) & 0x01; + val != 0 } - #[doc = "MDIOS peripheral clock enable"] - pub fn set_mdiosen(&mut self, val: super::vals::C1Apb1henrCrsen) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + #[doc = "QUADSPI memory mapping swap"] + pub fn set_qfs(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); } - #[doc = "FDCAN Peripheral Clocks Enable"] - pub const fn fdcanen(&self) -> super::vals::C1Apb1henrCrsen { + #[doc = "Flash Bank mode selection"] + pub const fn fb_mode(&self) -> bool { let val = (self.0 >> 8usize) & 0x01; - super::vals::C1Apb1henrCrsen(val as u8) + val != 0 } - #[doc = "FDCAN Peripheral Clocks Enable"] - pub fn set_fdcanen(&mut self, val: super::vals::C1Apb1henrCrsen) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); + #[doc = "Flash Bank mode selection"] + pub fn set_fb_mode(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); } } - impl Default for C1Apb1henr { - fn default() -> C1Apb1henr { - C1Apb1henr(0) + impl Default for Memrmp { + fn default() -> Memrmp { + Memrmp(0) } } - #[doc = "RCC APB2 Clock Register"] + #[doc = "configuration register 1"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct C1Apb2enr(pub u32); - impl C1Apb2enr { - #[doc = "TIM1 peripheral clock enable"] - pub const fn tim1en(&self) -> super::vals::C1Apb2enrTim1en { + pub struct Cfgr1(pub u32); + impl Cfgr1 { + #[doc = "Firewall disable"] + pub const fn fwdis(&self) -> bool { let val = (self.0 >> 0usize) & 0x01; - super::vals::C1Apb2enrTim1en(val as u8) - } - #[doc = "TIM1 peripheral clock enable"] - pub fn set_tim1en(&mut self, val: super::vals::C1Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + val != 0 } - #[doc = "TIM8 peripheral clock enable"] - pub const fn tim8en(&self) -> super::vals::C1Apb2enrTim1en { - let val = (self.0 >> 1usize) & 0x01; - super::vals::C1Apb2enrTim1en(val as u8) + #[doc = "Firewall disable"] + pub fn set_fwdis(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "TIM8 peripheral clock enable"] - pub fn set_tim8en(&mut self, val: super::vals::C1Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + #[doc = "I/O analog switch voltage booster enable"] + pub const fn boosten(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 } - #[doc = "USART1 Peripheral Clocks Enable"] - pub const fn usart1en(&self) -> super::vals::C1Apb2enrTim1en { - let val = (self.0 >> 4usize) & 0x01; - super::vals::C1Apb2enrTim1en(val as u8) + #[doc = "I/O analog switch voltage booster enable"] + pub fn set_boosten(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); } - #[doc = "USART1 Peripheral Clocks Enable"] - pub fn set_usart1en(&mut self, val: super::vals::C1Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB6"] + pub const fn i2c_pb6_fmp(&self) -> bool { + let val = (self.0 >> 16usize) & 0x01; + val != 0 } - #[doc = "USART6 Peripheral Clocks Enable"] - pub const fn usart6en(&self) -> super::vals::C1Apb2enrTim1en { - let val = (self.0 >> 5usize) & 0x01; - super::vals::C1Apb2enrTim1en(val as u8) + #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB6"] + pub fn set_i2c_pb6_fmp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); } - #[doc = "USART6 Peripheral Clocks Enable"] - pub fn set_usart6en(&mut self, val: super::vals::C1Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB7"] + pub const fn i2c_pb7_fmp(&self) -> bool { + let val = (self.0 >> 17usize) & 0x01; + val != 0 } - #[doc = "SPI1 Peripheral Clocks Enable"] - pub const fn spi1en(&self) -> super::vals::C1Apb2enrTim1en { - let val = (self.0 >> 12usize) & 0x01; - super::vals::C1Apb2enrTim1en(val as u8) + #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB7"] + pub fn set_i2c_pb7_fmp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); } - #[doc = "SPI1 Peripheral Clocks Enable"] - pub fn set_spi1en(&mut self, val: super::vals::C1Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); + #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB8"] + pub const fn i2c_pb8_fmp(&self) -> bool { + let val = (self.0 >> 18usize) & 0x01; + val != 0 } - #[doc = "SPI4 Peripheral Clocks Enable"] - pub const fn spi4en(&self) -> super::vals::C1Apb2enrTim1en { - let val = (self.0 >> 13usize) & 0x01; - super::vals::C1Apb2enrTim1en(val as u8) + #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB8"] + pub fn set_i2c_pb8_fmp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize); } - #[doc = "SPI4 Peripheral Clocks Enable"] - pub fn set_spi4en(&mut self, val: super::vals::C1Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize); + #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB9"] + pub const fn i2c_pb9_fmp(&self) -> bool { + let val = (self.0 >> 19usize) & 0x01; + val != 0 } - #[doc = "TIM15 peripheral clock enable"] - pub const fn tim15en(&self) -> super::vals::C1Apb2enrTim1en { - let val = (self.0 >> 16usize) & 0x01; - super::vals::C1Apb2enrTim1en(val as u8) + #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB9"] + pub fn set_i2c_pb9_fmp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize); } - #[doc = "TIM15 peripheral clock enable"] - pub fn set_tim15en(&mut self, val: super::vals::C1Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); - } - #[doc = "TIM16 peripheral clock enable"] - pub const fn tim16en(&self) -> super::vals::C1Apb2enrTim1en { - let val = (self.0 >> 17usize) & 0x01; - super::vals::C1Apb2enrTim1en(val as u8) - } - #[doc = "TIM16 peripheral clock enable"] - pub fn set_tim16en(&mut self, val: super::vals::C1Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); - } - #[doc = "TIM17 peripheral clock enable"] - pub const fn tim17en(&self) -> super::vals::C1Apb2enrTim1en { - let val = (self.0 >> 18usize) & 0x01; - super::vals::C1Apb2enrTim1en(val as u8) - } - #[doc = "TIM17 peripheral clock enable"] - pub fn set_tim17en(&mut self, val: super::vals::C1Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); - } - #[doc = "SPI5 Peripheral Clocks Enable"] - pub const fn spi5en(&self) -> super::vals::C1Apb2enrTim1en { + #[doc = "I2C1 Fast-mode Plus driving capability activation"] + pub const fn i2c1_fmp(&self) -> bool { let val = (self.0 >> 20usize) & 0x01; - super::vals::C1Apb2enrTim1en(val as u8) - } - #[doc = "SPI5 Peripheral Clocks Enable"] - pub fn set_spi5en(&mut self, val: super::vals::C1Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize); + val != 0 } - #[doc = "SAI1 Peripheral Clocks Enable"] - pub const fn sai1en(&self) -> super::vals::C1Apb2enrTim1en { - let val = (self.0 >> 22usize) & 0x01; - super::vals::C1Apb2enrTim1en(val as u8) + #[doc = "I2C1 Fast-mode Plus driving capability activation"] + pub fn set_i2c1_fmp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize); } - #[doc = "SAI1 Peripheral Clocks Enable"] - pub fn set_sai1en(&mut self, val: super::vals::C1Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); + #[doc = "I2C2 Fast-mode Plus driving capability activation"] + pub const fn i2c2_fmp(&self) -> bool { + let val = (self.0 >> 21usize) & 0x01; + val != 0 } - #[doc = "SAI2 Peripheral Clocks Enable"] - pub const fn sai2en(&self) -> super::vals::C1Apb2enrTim1en { - let val = (self.0 >> 23usize) & 0x01; - super::vals::C1Apb2enrTim1en(val as u8) + #[doc = "I2C2 Fast-mode Plus driving capability activation"] + pub fn set_i2c2_fmp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); } - #[doc = "SAI2 Peripheral Clocks Enable"] - pub fn set_sai2en(&mut self, val: super::vals::C1Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize); + #[doc = "I2C3 Fast-mode Plus driving capability activation"] + pub const fn i2c3_fmp(&self) -> bool { + let val = (self.0 >> 22usize) & 0x01; + val != 0 } - #[doc = "SAI3 Peripheral Clocks Enable"] - pub const fn sai3en(&self) -> super::vals::C1Apb2enrTim1en { - let val = (self.0 >> 24usize) & 0x01; - super::vals::C1Apb2enrTim1en(val as u8) + #[doc = "I2C3 Fast-mode Plus driving capability activation"] + pub fn set_i2c3_fmp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); } - #[doc = "SAI3 Peripheral Clocks Enable"] - pub fn set_sai3en(&mut self, val: super::vals::C1Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); + #[doc = "Floating Point Unit interrupts enable bits"] + pub const fn fpu_ie(&self) -> u8 { + let val = (self.0 >> 26usize) & 0x3f; + val as u8 } - #[doc = "DFSDM1 Peripheral Clocks Enable"] - pub const fn dfsdm1en(&self) -> super::vals::C1Apb2enrTim1en { - let val = (self.0 >> 28usize) & 0x01; - super::vals::C1Apb2enrTim1en(val as u8) + #[doc = "Floating Point Unit interrupts enable bits"] + pub fn set_fpu_ie(&mut self, val: u8) { + self.0 = (self.0 & !(0x3f << 26usize)) | (((val as u32) & 0x3f) << 26usize); } - #[doc = "DFSDM1 Peripheral Clocks Enable"] - pub fn set_dfsdm1en(&mut self, val: super::vals::C1Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); + } + impl Default for Cfgr1 { + fn default() -> Cfgr1 { + Cfgr1(0) } - #[doc = "HRTIM peripheral clock enable"] - pub const fn hrtimen(&self) -> super::vals::C1Apb2enrTim1en { - let val = (self.0 >> 29usize) & 0x01; - super::vals::C1Apb2enrTim1en(val as u8) + } + #[doc = "external interrupt configuration register 4"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Exticr(pub u32); + impl Exticr { + #[doc = "EXTI12 configuration bits"] + pub fn exti(&self, n: usize) -> u8 { + assert!(n < 4usize); + let offs = 0usize + n * 4usize; + let val = (self.0 >> offs) & 0x0f; + val as u8 } - #[doc = "HRTIM peripheral clock enable"] - pub fn set_hrtimen(&mut self, val: super::vals::C1Apb2enrTim1en) { - self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); + #[doc = "EXTI12 configuration bits"] + pub fn set_exti(&mut self, n: usize, val: u8) { + assert!(n < 4usize); + let offs = 0usize + n * 4usize; + self.0 = (self.0 & !(0x0f << offs)) | (((val as u32) & 0x0f) << offs); } } - impl Default for C1Apb2enr { - fn default() -> C1Apb2enr { - C1Apb2enr(0) + impl Default for Exticr { + fn default() -> Exticr { + Exticr(0) } } - #[doc = "RCC AHB2 Sleep Clock Register"] + } +} +pub mod i2c_v1 { + use crate::generic::*; + #[doc = "Inter-integrated circuit"] + #[derive(Copy, Clone)] + pub struct I2c(pub *mut u8); + unsafe impl Send for I2c {} + unsafe impl Sync for I2c {} + impl I2c { + #[doc = "Control register 1"] + pub fn cr1(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(0usize)) } + } + #[doc = "Control register 2"] + pub fn cr2(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(4usize)) } + } + #[doc = "Own address register 1"] + pub fn oar1(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(8usize)) } + } + #[doc = "Own address register 2"] + pub fn oar2(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(12usize)) } + } + #[doc = "Data register"] + pub fn dr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(16usize)) } + } + #[doc = "Status register 1"] + pub fn sr1(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(20usize)) } + } + #[doc = "Status register 2"] + pub fn sr2(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(24usize)) } + } + #[doc = "Clock control register"] + pub fn ccr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(28usize)) } + } + #[doc = "TRISE register"] + pub fn trise(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(32usize)) } + } + #[doc = "FLTR register"] + pub fn fltr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(36usize)) } + } + } + pub mod regs { + use crate::generic::*; + #[doc = "Own address register 2"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ahb2lpenr(pub u32); - impl Ahb2lpenr { - #[doc = "DCMI peripheral clock enable during csleep mode"] - pub const fn dcmilpen(&self) -> super::vals::Ahb2lpenrDcmilpen { + pub struct Oar2(pub u32); + impl Oar2 { + #[doc = "Dual addressing mode enable"] + pub const fn endual(&self) -> super::vals::Endual { let val = (self.0 >> 0usize) & 0x01; - super::vals::Ahb2lpenrDcmilpen(val as u8) + super::vals::Endual(val as u8) } - #[doc = "DCMI peripheral clock enable during csleep mode"] - pub fn set_dcmilpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) { + #[doc = "Dual addressing mode enable"] + pub fn set_endual(&mut self, val: super::vals::Endual) { self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "CRYPT peripheral clock enable during CSleep mode"] - pub const fn cryptlpen(&self) -> super::vals::Ahb2lpenrDcmilpen { - let val = (self.0 >> 4usize) & 0x01; - super::vals::Ahb2lpenrDcmilpen(val as u8) + #[doc = "Interface address"] + pub const fn add2(&self) -> u8 { + let val = (self.0 >> 1usize) & 0x7f; + val as u8 } - #[doc = "CRYPT peripheral clock enable during CSleep mode"] - pub fn set_cryptlpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + #[doc = "Interface address"] + pub fn set_add2(&mut self, val: u8) { + self.0 = (self.0 & !(0x7f << 1usize)) | (((val as u32) & 0x7f) << 1usize); } - #[doc = "HASH peripheral clock enable during CSleep mode"] - pub const fn hashlpen(&self) -> super::vals::Ahb2lpenrDcmilpen { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Ahb2lpenrDcmilpen(val as u8) + } + impl Default for Oar2 { + fn default() -> Oar2 { + Oar2(0) } - #[doc = "HASH peripheral clock enable during CSleep mode"] - pub fn set_hashlpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + } + #[doc = "Control register 2"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Cr2(pub u32); + impl Cr2 { + #[doc = "Peripheral clock frequency"] + pub const fn freq(&self) -> u8 { + let val = (self.0 >> 0usize) & 0x3f; + val as u8 } - #[doc = "RNG peripheral clock enable during CSleep mode"] - pub const fn rnglpen(&self) -> super::vals::Ahb2lpenrDcmilpen { - let val = (self.0 >> 6usize) & 0x01; - super::vals::Ahb2lpenrDcmilpen(val as u8) + #[doc = "Peripheral clock frequency"] + pub fn set_freq(&mut self, val: u8) { + self.0 = (self.0 & !(0x3f << 0usize)) | (((val as u32) & 0x3f) << 0usize); } - #[doc = "RNG peripheral clock enable during CSleep mode"] - pub fn set_rnglpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); + #[doc = "Error interrupt enable"] + pub const fn iterren(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 } - #[doc = "SDMMC2 and SDMMC2 Delay Clock Enable During CSleep Mode"] - pub const fn sdmmc2lpen(&self) -> super::vals::Ahb2lpenrDcmilpen { + #[doc = "Error interrupt enable"] + pub fn set_iterren(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + } + #[doc = "Event interrupt enable"] + pub const fn itevten(&self) -> bool { let val = (self.0 >> 9usize) & 0x01; - super::vals::Ahb2lpenrDcmilpen(val as u8) + val != 0 } - #[doc = "SDMMC2 and SDMMC2 Delay Clock Enable During CSleep Mode"] - pub fn set_sdmmc2lpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + #[doc = "Event interrupt enable"] + pub fn set_itevten(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); } - #[doc = "SRAM1 Clock Enable During CSleep Mode"] - pub const fn sram1lpen(&self) -> super::vals::Ahb2lpenrDcmilpen { - let val = (self.0 >> 29usize) & 0x01; - super::vals::Ahb2lpenrDcmilpen(val as u8) + #[doc = "Buffer interrupt enable"] + pub const fn itbufen(&self) -> bool { + let val = (self.0 >> 10usize) & 0x01; + val != 0 } - #[doc = "SRAM1 Clock Enable During CSleep Mode"] - pub fn set_sram1lpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) { - self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); + #[doc = "Buffer interrupt enable"] + pub fn set_itbufen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); } - #[doc = "SRAM2 Clock Enable During CSleep Mode"] - pub const fn sram2lpen(&self) -> super::vals::Ahb2lpenrDcmilpen { - let val = (self.0 >> 30usize) & 0x01; - super::vals::Ahb2lpenrDcmilpen(val as u8) + #[doc = "DMA requests enable"] + pub const fn dmaen(&self) -> bool { + let val = (self.0 >> 11usize) & 0x01; + val != 0 } - #[doc = "SRAM2 Clock Enable During CSleep Mode"] - pub fn set_sram2lpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) { - self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize); + #[doc = "DMA requests enable"] + pub fn set_dmaen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); } - #[doc = "SRAM3 Clock Enable During CSleep Mode"] - pub const fn sram3lpen(&self) -> super::vals::Ahb2lpenrDcmilpen { - let val = (self.0 >> 31usize) & 0x01; - super::vals::Ahb2lpenrDcmilpen(val as u8) + #[doc = "DMA last transfer"] + pub const fn last(&self) -> bool { + let val = (self.0 >> 12usize) & 0x01; + val != 0 } - #[doc = "SRAM3 Clock Enable During CSleep Mode"] - pub fn set_sram3lpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) { - self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); + #[doc = "DMA last transfer"] + pub fn set_last(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); } } - impl Default for Ahb2lpenr { - fn default() -> Ahb2lpenr { - Ahb2lpenr(0) + impl Default for Cr2 { + fn default() -> Cr2 { + Cr2(0) } } - #[doc = "RCC Domain 2 Kernel Clock Configuration Register"] + #[doc = "Clock control register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct D2ccip1r(pub u32); - impl D2ccip1r { - #[doc = "SAI1 and DFSDM1 kernel Aclk clock source selection"] - pub const fn sai1sel(&self) -> super::vals::Sai1sel { - let val = (self.0 >> 0usize) & 0x07; - super::vals::Sai1sel(val as u8) - } - #[doc = "SAI1 and DFSDM1 kernel Aclk clock source selection"] - pub fn set_sai1sel(&mut self, val: super::vals::Sai1sel) { - self.0 = (self.0 & !(0x07 << 0usize)) | (((val.0 as u32) & 0x07) << 0usize); - } - #[doc = "SAI2 and SAI3 kernel clock source selection"] - pub const fn sai23sel(&self) -> super::vals::Sai1sel { - let val = (self.0 >> 6usize) & 0x07; - super::vals::Sai1sel(val as u8) + pub struct Ccr(pub u32); + impl Ccr { + #[doc = "Clock control register in Fast/Standard mode (Master mode)"] + pub const fn ccr(&self) -> u16 { + let val = (self.0 >> 0usize) & 0x0fff; + val as u16 } - #[doc = "SAI2 and SAI3 kernel clock source selection"] - pub fn set_sai23sel(&mut self, val: super::vals::Sai1sel) { - self.0 = (self.0 & !(0x07 << 6usize)) | (((val.0 as u32) & 0x07) << 6usize); + #[doc = "Clock control register in Fast/Standard mode (Master mode)"] + pub fn set_ccr(&mut self, val: u16) { + self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize); } - #[doc = "SPI/I2S1,2 and 3 kernel clock source selection"] - pub const fn spi123sel(&self) -> super::vals::Sai1sel { - let val = (self.0 >> 12usize) & 0x07; - super::vals::Sai1sel(val as u8) + #[doc = "Fast mode duty cycle"] + pub const fn duty(&self) -> super::vals::Duty { + let val = (self.0 >> 14usize) & 0x01; + super::vals::Duty(val as u8) } - #[doc = "SPI/I2S1,2 and 3 kernel clock source selection"] - pub fn set_spi123sel(&mut self, val: super::vals::Sai1sel) { - self.0 = (self.0 & !(0x07 << 12usize)) | (((val.0 as u32) & 0x07) << 12usize); + #[doc = "Fast mode duty cycle"] + pub fn set_duty(&mut self, val: super::vals::Duty) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); } - #[doc = "SPI4 and 5 kernel clock source selection"] - pub const fn spi45sel(&self) -> super::vals::Spi45sel { - let val = (self.0 >> 16usize) & 0x07; - super::vals::Spi45sel(val as u8) + #[doc = "I2C master mode selection"] + pub const fn f_s(&self) -> super::vals::FS { + let val = (self.0 >> 15usize) & 0x01; + super::vals::FS(val as u8) } - #[doc = "SPI4 and 5 kernel clock source selection"] - pub fn set_spi45sel(&mut self, val: super::vals::Spi45sel) { - self.0 = (self.0 & !(0x07 << 16usize)) | (((val.0 as u32) & 0x07) << 16usize); + #[doc = "I2C master mode selection"] + pub fn set_f_s(&mut self, val: super::vals::FS) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); } - #[doc = "SPDIFRX kernel clock source selection"] - pub const fn spdifsel(&self) -> super::vals::Spdifsel { - let val = (self.0 >> 20usize) & 0x03; - super::vals::Spdifsel(val as u8) + } + impl Default for Ccr { + fn default() -> Ccr { + Ccr(0) } - #[doc = "SPDIFRX kernel clock source selection"] - pub fn set_spdifsel(&mut self, val: super::vals::Spdifsel) { - self.0 = (self.0 & !(0x03 << 20usize)) | (((val.0 as u32) & 0x03) << 20usize); + } + #[doc = "Data register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Dr(pub u32); + impl Dr { + #[doc = "8-bit data register"] + pub const fn dr(&self) -> u8 { + let val = (self.0 >> 0usize) & 0xff; + val as u8 } - #[doc = "DFSDM1 kernel Clk clock source selection"] - pub const fn dfsdm1sel(&self) -> super::vals::Dfsdm1sel { - let val = (self.0 >> 24usize) & 0x01; - super::vals::Dfsdm1sel(val as u8) + #[doc = "8-bit data register"] + pub fn set_dr(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize); } - #[doc = "DFSDM1 kernel Clk clock source selection"] - pub fn set_dfsdm1sel(&mut self, val: super::vals::Dfsdm1sel) { - self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); + } + impl Default for Dr { + fn default() -> Dr { + Dr(0) } - #[doc = "FDCAN kernel clock source selection"] - pub const fn fdcansel(&self) -> super::vals::Fdcansel { - let val = (self.0 >> 28usize) & 0x03; - super::vals::Fdcansel(val as u8) + } + #[doc = "Own address register 1"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Oar1(pub u32); + impl Oar1 { + #[doc = "Interface address"] + pub const fn add(&self) -> u16 { + let val = (self.0 >> 0usize) & 0x03ff; + val as u16 } - #[doc = "FDCAN kernel clock source selection"] - pub fn set_fdcansel(&mut self, val: super::vals::Fdcansel) { - self.0 = (self.0 & !(0x03 << 28usize)) | (((val.0 as u32) & 0x03) << 28usize); + #[doc = "Interface address"] + pub fn set_add(&mut self, val: u16) { + self.0 = (self.0 & !(0x03ff << 0usize)) | (((val as u32) & 0x03ff) << 0usize); } - #[doc = "SWPMI kernel clock source selection"] - pub const fn swpsel(&self) -> super::vals::Swpsel { - let val = (self.0 >> 31usize) & 0x01; - super::vals::Swpsel(val as u8) + #[doc = "Addressing mode (slave mode)"] + pub const fn addmode(&self) -> super::vals::Addmode { + let val = (self.0 >> 15usize) & 0x01; + super::vals::Addmode(val as u8) } - #[doc = "SWPMI kernel clock source selection"] - pub fn set_swpsel(&mut self, val: super::vals::Swpsel) { - self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); + #[doc = "Addressing mode (slave mode)"] + pub fn set_addmode(&mut self, val: super::vals::Addmode) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); } } - impl Default for D2ccip1r { - fn default() -> D2ccip1r { - D2ccip1r(0) + impl Default for Oar1 { + fn default() -> Oar1 { + Oar1(0) } } - #[doc = "RCC APB1 Clock Register"] + #[doc = "FLTR register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Apb1henr(pub u32); - impl Apb1henr { - #[doc = "Clock Recovery System peripheral clock enable"] - pub const fn crsen(&self) -> super::vals::Apb1henrCrsen { - let val = (self.0 >> 1usize) & 0x01; - super::vals::Apb1henrCrsen(val as u8) - } - #[doc = "Clock Recovery System peripheral clock enable"] - pub fn set_crsen(&mut self, val: super::vals::Apb1henrCrsen) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); - } - #[doc = "SWPMI Peripheral Clocks Enable"] - pub const fn swpen(&self) -> super::vals::Apb1henrCrsen { - let val = (self.0 >> 2usize) & 0x01; - super::vals::Apb1henrCrsen(val as u8) + pub struct Fltr(pub u32); + impl Fltr { + #[doc = "Digital noise filter"] + pub const fn dnf(&self) -> super::vals::Dnf { + let val = (self.0 >> 0usize) & 0x0f; + super::vals::Dnf(val as u8) } - #[doc = "SWPMI Peripheral Clocks Enable"] - pub fn set_swpen(&mut self, val: super::vals::Apb1henrCrsen) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); + #[doc = "Digital noise filter"] + pub fn set_dnf(&mut self, val: super::vals::Dnf) { + self.0 = (self.0 & !(0x0f << 0usize)) | (((val.0 as u32) & 0x0f) << 0usize); } - #[doc = "OPAMP peripheral clock enable"] - pub const fn opampen(&self) -> super::vals::Apb1henrCrsen { + #[doc = "Analog noise filter"] + pub const fn anoff(&self) -> bool { let val = (self.0 >> 4usize) & 0x01; - super::vals::Apb1henrCrsen(val as u8) - } - #[doc = "OPAMP peripheral clock enable"] - pub fn set_opampen(&mut self, val: super::vals::Apb1henrCrsen) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + val != 0 } - #[doc = "MDIOS peripheral clock enable"] - pub const fn mdiosen(&self) -> super::vals::Apb1henrCrsen { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Apb1henrCrsen(val as u8) + #[doc = "Analog noise filter"] + pub fn set_anoff(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); } - #[doc = "MDIOS peripheral clock enable"] - pub fn set_mdiosen(&mut self, val: super::vals::Apb1henrCrsen) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + } + impl Default for Fltr { + fn default() -> Fltr { + Fltr(0) } - #[doc = "FDCAN Peripheral Clocks Enable"] - pub const fn fdcanen(&self) -> super::vals::Apb1henrCrsen { - let val = (self.0 >> 8usize) & 0x01; - super::vals::Apb1henrCrsen(val as u8) + } + #[doc = "TRISE register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Trise(pub u32); + impl Trise { + #[doc = "Maximum rise time in Fast/Standard mode (Master mode)"] + pub const fn trise(&self) -> u8 { + let val = (self.0 >> 0usize) & 0x3f; + val as u8 } - #[doc = "FDCAN Peripheral Clocks Enable"] - pub fn set_fdcanen(&mut self, val: super::vals::Apb1henrCrsen) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); + #[doc = "Maximum rise time in Fast/Standard mode (Master mode)"] + pub fn set_trise(&mut self, val: u8) { + self.0 = (self.0 & !(0x3f << 0usize)) | (((val as u32) & 0x3f) << 0usize); } } - impl Default for Apb1henr { - fn default() -> Apb1henr { - Apb1henr(0) + impl Default for Trise { + fn default() -> Trise { + Trise(0) } } - #[doc = "RCC AHB3 Clock Register"] + #[doc = "Status register 1"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ahb3enr(pub u32); - impl Ahb3enr { - #[doc = "MDMA Peripheral Clock Enable"] - pub const fn mdmaen(&self) -> super::vals::Ahb3enrMdmaen { + pub struct Sr1(pub u32); + impl Sr1 { + #[doc = "Start bit (Master mode)"] + pub const fn sb(&self) -> super::vals::Sb { let val = (self.0 >> 0usize) & 0x01; - super::vals::Ahb3enrMdmaen(val as u8) + super::vals::Sb(val as u8) } - #[doc = "MDMA Peripheral Clock Enable"] - pub fn set_mdmaen(&mut self, val: super::vals::Ahb3enrMdmaen) { + #[doc = "Start bit (Master mode)"] + pub fn set_sb(&mut self, val: super::vals::Sb) { self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "DMA2D Peripheral Clock Enable"] - pub const fn dma2den(&self) -> super::vals::Ahb3enrMdmaen { - let val = (self.0 >> 4usize) & 0x01; - super::vals::Ahb3enrMdmaen(val as u8) + #[doc = "Address sent (master mode)/matched (slave mode)"] + pub const fn addr(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; + val != 0 } - #[doc = "DMA2D Peripheral Clock Enable"] - pub fn set_dma2den(&mut self, val: super::vals::Ahb3enrMdmaen) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + #[doc = "Address sent (master mode)/matched (slave mode)"] + pub fn set_addr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - #[doc = "JPGDEC Peripheral Clock Enable"] - pub const fn jpgdecen(&self) -> super::vals::Ahb3enrMdmaen { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Ahb3enrMdmaen(val as u8) + #[doc = "Byte transfer finished"] + pub const fn btf(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; + val != 0 } - #[doc = "JPGDEC Peripheral Clock Enable"] - pub fn set_jpgdecen(&mut self, val: super::vals::Ahb3enrMdmaen) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + #[doc = "Byte transfer finished"] + pub fn set_btf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); } - #[doc = "FMC Peripheral Clocks Enable"] - pub const fn fmcen(&self) -> super::vals::Ahb3enrMdmaen { - let val = (self.0 >> 12usize) & 0x01; - super::vals::Ahb3enrMdmaen(val as u8) + #[doc = "10-bit header sent (Master mode)"] + pub const fn add10(&self) -> bool { + let val = (self.0 >> 3usize) & 0x01; + val != 0 } - #[doc = "FMC Peripheral Clocks Enable"] - pub fn set_fmcen(&mut self, val: super::vals::Ahb3enrMdmaen) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); + #[doc = "10-bit header sent (Master mode)"] + pub fn set_add10(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); } - #[doc = "QUADSPI and QUADSPI Delay Clock Enable"] - pub const fn qspien(&self) -> super::vals::Ahb3enrMdmaen { - let val = (self.0 >> 14usize) & 0x01; - super::vals::Ahb3enrMdmaen(val as u8) + #[doc = "Stop detection (slave mode)"] + pub const fn stopf(&self) -> bool { + let val = (self.0 >> 4usize) & 0x01; + val != 0 } - #[doc = "QUADSPI and QUADSPI Delay Clock Enable"] - pub fn set_qspien(&mut self, val: super::vals::Ahb3enrMdmaen) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); + #[doc = "Stop detection (slave mode)"] + pub fn set_stopf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); } - #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable"] - pub const fn sdmmc1en(&self) -> super::vals::Ahb3enrMdmaen { - let val = (self.0 >> 16usize) & 0x01; - super::vals::Ahb3enrMdmaen(val as u8) + #[doc = "Data register not empty (receivers)"] + pub const fn rx_ne(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 } - #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable"] - pub fn set_sdmmc1en(&mut self, val: super::vals::Ahb3enrMdmaen) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + #[doc = "Data register not empty (receivers)"] + pub fn set_rx_ne(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - } - impl Default for Ahb3enr { - fn default() -> Ahb3enr { - Ahb3enr(0) + #[doc = "Data register empty (transmitters)"] + pub const fn tx_e(&self) -> bool { + let val = (self.0 >> 7usize) & 0x01; + val != 0 } - } - #[doc = "RCC Clock Source Interrupt Clear Register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cicr(pub u32); - impl Cicr { - #[doc = "LSI ready Interrupt Clear"] - pub const fn lsirdyc(&self) -> super::vals::Lsirdyc { - let val = (self.0 >> 0usize) & 0x01; - super::vals::Lsirdyc(val as u8) + #[doc = "Data register empty (transmitters)"] + pub fn set_tx_e(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); } - #[doc = "LSI ready Interrupt Clear"] - pub fn set_lsirdyc(&mut self, val: super::vals::Lsirdyc) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); - } - #[doc = "LSE ready Interrupt Clear"] - pub const fn lserdyc(&self) -> super::vals::Lsirdyc { - let val = (self.0 >> 1usize) & 0x01; - super::vals::Lsirdyc(val as u8) - } - #[doc = "LSE ready Interrupt Clear"] - pub fn set_lserdyc(&mut self, val: super::vals::Lsirdyc) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); - } - #[doc = "HSI ready Interrupt Clear"] - pub const fn hsirdyc(&self) -> super::vals::Lsirdyc { - let val = (self.0 >> 2usize) & 0x01; - super::vals::Lsirdyc(val as u8) - } - #[doc = "HSI ready Interrupt Clear"] - pub fn set_hsirdyc(&mut self, val: super::vals::Lsirdyc) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); - } - #[doc = "HSE ready Interrupt Clear"] - pub const fn hserdyc(&self) -> super::vals::Lsirdyc { - let val = (self.0 >> 3usize) & 0x01; - super::vals::Lsirdyc(val as u8) + #[doc = "Bus error"] + pub const fn berr(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 } - #[doc = "HSE ready Interrupt Clear"] - pub fn set_hserdyc(&mut self, val: super::vals::Lsirdyc) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); + #[doc = "Bus error"] + pub fn set_berr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); } - #[doc = "CSI ready Interrupt Clear"] - pub const fn hse_ready_interrupt_clear(&self) -> bool { - let val = (self.0 >> 4usize) & 0x01; + #[doc = "Arbitration lost (master mode)"] + pub const fn arlo(&self) -> bool { + let val = (self.0 >> 9usize) & 0x01; val != 0 } - #[doc = "CSI ready Interrupt Clear"] - pub fn set_hse_ready_interrupt_clear(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); - } - #[doc = "RC48 ready Interrupt Clear"] - pub const fn hsi48rdyc(&self) -> super::vals::Lsirdyc { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Lsirdyc(val as u8) + #[doc = "Arbitration lost (master mode)"] + pub fn set_arlo(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); } - #[doc = "RC48 ready Interrupt Clear"] - pub fn set_hsi48rdyc(&mut self, val: super::vals::Lsirdyc) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + #[doc = "Acknowledge failure"] + pub const fn af(&self) -> bool { + let val = (self.0 >> 10usize) & 0x01; + val != 0 } - #[doc = "PLL1 ready Interrupt Clear"] - pub fn pllrdyc(&self, n: usize) -> super::vals::Lsirdyc { - assert!(n < 3usize); - let offs = 6usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; - super::vals::Lsirdyc(val as u8) + #[doc = "Acknowledge failure"] + pub fn set_af(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); } - #[doc = "PLL1 ready Interrupt Clear"] - pub fn set_pllrdyc(&mut self, n: usize, val: super::vals::Lsirdyc) { - assert!(n < 3usize); - let offs = 6usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); + #[doc = "Overrun/Underrun"] + pub const fn ovr(&self) -> bool { + let val = (self.0 >> 11usize) & 0x01; + val != 0 } - #[doc = "LSE clock security system Interrupt Clear"] - pub const fn lsecssc(&self) -> super::vals::Lsirdyc { - let val = (self.0 >> 9usize) & 0x01; - super::vals::Lsirdyc(val as u8) + #[doc = "Overrun/Underrun"] + pub fn set_ovr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); } - #[doc = "LSE clock security system Interrupt Clear"] - pub fn set_lsecssc(&mut self, val: super::vals::Lsirdyc) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + #[doc = "PEC Error in reception"] + pub const fn pecerr(&self) -> bool { + let val = (self.0 >> 12usize) & 0x01; + val != 0 } - #[doc = "HSE clock security system Interrupt Clear"] - pub const fn hsecssc(&self) -> super::vals::Lsirdyc { - let val = (self.0 >> 10usize) & 0x01; - super::vals::Lsirdyc(val as u8) + #[doc = "PEC Error in reception"] + pub fn set_pecerr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); } - #[doc = "HSE clock security system Interrupt Clear"] - pub fn set_hsecssc(&mut self, val: super::vals::Lsirdyc) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); + #[doc = "Timeout or Tlow error"] + pub const fn timeout(&self) -> bool { + let val = (self.0 >> 14usize) & 0x01; + val != 0 } - } - impl Default for Cicr { - fn default() -> Cicr { - Cicr(0) + #[doc = "Timeout or Tlow error"] + pub fn set_timeout(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); } - } - #[doc = "RCC Domain 3 Clock Configuration Register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct D3cfgr(pub u32); - impl D3cfgr { - #[doc = "D3 domain APB4 prescaler"] - pub const fn d3ppre(&self) -> super::vals::D3ppre { - let val = (self.0 >> 4usize) & 0x07; - super::vals::D3ppre(val as u8) + #[doc = "SMBus alert"] + pub const fn smbalert(&self) -> bool { + let val = (self.0 >> 15usize) & 0x01; + val != 0 } - #[doc = "D3 domain APB4 prescaler"] - pub fn set_d3ppre(&mut self, val: super::vals::D3ppre) { - self.0 = (self.0 & !(0x07 << 4usize)) | (((val.0 as u32) & 0x07) << 4usize); + #[doc = "SMBus alert"] + pub fn set_smbalert(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); } } - impl Default for D3cfgr { - fn default() -> D3cfgr { - D3cfgr(0) + impl Default for Sr1 { + fn default() -> Sr1 { + Sr1(0) } } - #[doc = "RCC Backup Domain Control Register"] + #[doc = "Status register 2"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Bdcr(pub u32); - impl Bdcr { - #[doc = "LSE oscillator enabled"] - pub const fn lseon(&self) -> super::vals::Lseon { + pub struct Sr2(pub u32); + impl Sr2 { + #[doc = "Master/slave"] + pub const fn msl(&self) -> bool { let val = (self.0 >> 0usize) & 0x01; - super::vals::Lseon(val as u8) + val != 0 } - #[doc = "LSE oscillator enabled"] - pub fn set_lseon(&mut self, val: super::vals::Lseon) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + #[doc = "Master/slave"] + pub fn set_msl(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "LSE oscillator ready"] - pub const fn lserdy(&self) -> bool { + #[doc = "Bus busy"] + pub const fn busy(&self) -> bool { let val = (self.0 >> 1usize) & 0x01; val != 0 } - #[doc = "LSE oscillator ready"] - pub fn set_lserdy(&mut self, val: bool) { + #[doc = "Bus busy"] + pub fn set_busy(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - #[doc = "LSE oscillator bypass"] - pub const fn lsebyp(&self) -> super::vals::Lsebyp { + #[doc = "Transmitter/receiver"] + pub const fn tra(&self) -> bool { let val = (self.0 >> 2usize) & 0x01; - super::vals::Lsebyp(val as u8) + val != 0 } - #[doc = "LSE oscillator bypass"] - pub fn set_lsebyp(&mut self, val: super::vals::Lsebyp) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); + #[doc = "Transmitter/receiver"] + pub fn set_tra(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); } - #[doc = "LSE oscillator driving capability"] - pub const fn lsedrv(&self) -> super::vals::Lsedrv { - let val = (self.0 >> 3usize) & 0x03; - super::vals::Lsedrv(val as u8) + #[doc = "General call address (Slave mode)"] + pub const fn gencall(&self) -> bool { + let val = (self.0 >> 4usize) & 0x01; + val != 0 } - #[doc = "LSE oscillator driving capability"] - pub fn set_lsedrv(&mut self, val: super::vals::Lsedrv) { - self.0 = (self.0 & !(0x03 << 3usize)) | (((val.0 as u32) & 0x03) << 3usize); + #[doc = "General call address (Slave mode)"] + pub fn set_gencall(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); } - #[doc = "LSE clock security system enable"] - pub const fn lsecsson(&self) -> super::vals::Lsecsson { + #[doc = "SMBus device default address (Slave mode)"] + pub const fn smbdefault(&self) -> bool { let val = (self.0 >> 5usize) & 0x01; - super::vals::Lsecsson(val as u8) + val != 0 } - #[doc = "LSE clock security system enable"] - pub fn set_lsecsson(&mut self, val: super::vals::Lsecsson) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + #[doc = "SMBus device default address (Slave mode)"] + pub fn set_smbdefault(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); } - #[doc = "LSE clock security system failure detection"] - pub const fn lsecssd(&self) -> bool { + #[doc = "SMBus host header (Slave mode)"] + pub const fn smbhost(&self) -> bool { let val = (self.0 >> 6usize) & 0x01; val != 0 } - #[doc = "LSE clock security system failure detection"] - pub fn set_lsecssd(&mut self, val: bool) { + #[doc = "SMBus host header (Slave mode)"] + pub fn set_smbhost(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - #[doc = "RTC clock source selection"] - pub const fn rtcsel(&self) -> super::vals::Rtcsel { - let val = (self.0 >> 8usize) & 0x03; - super::vals::Rtcsel(val as u8) - } - #[doc = "RTC clock source selection"] - pub fn set_rtcsel(&mut self, val: super::vals::Rtcsel) { - self.0 = (self.0 & !(0x03 << 8usize)) | (((val.0 as u32) & 0x03) << 8usize); - } - #[doc = "RTC clock enable"] - pub const fn rtcen(&self) -> super::vals::Rtcen { - let val = (self.0 >> 15usize) & 0x01; - super::vals::Rtcen(val as u8) + #[doc = "Dual flag (Slave mode)"] + pub const fn dualf(&self) -> bool { + let val = (self.0 >> 7usize) & 0x01; + val != 0 } - #[doc = "RTC clock enable"] - pub fn set_rtcen(&mut self, val: super::vals::Rtcen) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + #[doc = "Dual flag (Slave mode)"] + pub fn set_dualf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); } - #[doc = "VSwitch domain software reset"] - pub const fn bdrst(&self) -> super::vals::Bdrst { - let val = (self.0 >> 16usize) & 0x01; - super::vals::Bdrst(val as u8) + #[doc = "acket error checking register"] + pub const fn pec(&self) -> u8 { + let val = (self.0 >> 8usize) & 0xff; + val as u8 } - #[doc = "VSwitch domain software reset"] - pub fn set_bdrst(&mut self, val: super::vals::Bdrst) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + #[doc = "acket error checking register"] + pub fn set_pec(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 8usize)) | (((val as u32) & 0xff) << 8usize); } } - impl Default for Bdcr { - fn default() -> Bdcr { - Bdcr(0) + impl Default for Sr2 { + fn default() -> Sr2 { + Sr2(0) } } - #[doc = "RCC AHB4 Sleep Clock Register"] + #[doc = "Control register 1"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ahb4lpenr(pub u32); - impl Ahb4lpenr { - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub const fn gpioalpen(&self) -> super::vals::Ahb4lpenrGpioalpen { + pub struct Cr1(pub u32); + impl Cr1 { + #[doc = "Peripheral enable"] + pub const fn pe(&self) -> bool { let val = (self.0 >> 0usize) & 0x01; - super::vals::Ahb4lpenrGpioalpen(val as u8) + val != 0 } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub fn set_gpioalpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + #[doc = "Peripheral enable"] + pub fn set_pe(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub const fn gpioblpen(&self) -> super::vals::Ahb4lpenrGpioalpen { + #[doc = "SMBus mode"] + pub const fn smbus(&self) -> super::vals::Smbus { let val = (self.0 >> 1usize) & 0x01; - super::vals::Ahb4lpenrGpioalpen(val as u8) + super::vals::Smbus(val as u8) } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub fn set_gpioblpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { + #[doc = "SMBus mode"] + pub fn set_smbus(&mut self, val: super::vals::Smbus) { self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub const fn gpioclpen(&self) -> super::vals::Ahb4lpenrGpioalpen { - let val = (self.0 >> 2usize) & 0x01; - super::vals::Ahb4lpenrGpioalpen(val as u8) - } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub fn set_gpioclpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); - } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub const fn gpiodlpen(&self) -> super::vals::Ahb4lpenrGpioalpen { + #[doc = "SMBus type"] + pub const fn smbtype(&self) -> super::vals::Smbtype { let val = (self.0 >> 3usize) & 0x01; - super::vals::Ahb4lpenrGpioalpen(val as u8) + super::vals::Smbtype(val as u8) } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub fn set_gpiodlpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { + #[doc = "SMBus type"] + pub fn set_smbtype(&mut self, val: super::vals::Smbtype) { self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub const fn gpioelpen(&self) -> super::vals::Ahb4lpenrGpioalpen { + #[doc = "ARP enable"] + pub const fn enarp(&self) -> bool { let val = (self.0 >> 4usize) & 0x01; - super::vals::Ahb4lpenrGpioalpen(val as u8) + val != 0 } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub fn set_gpioelpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + #[doc = "ARP enable"] + pub fn set_enarp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub const fn gpioflpen(&self) -> super::vals::Ahb4lpenrGpioalpen { + #[doc = "PEC enable"] + pub const fn enpec(&self) -> bool { let val = (self.0 >> 5usize) & 0x01; - super::vals::Ahb4lpenrGpioalpen(val as u8) + val != 0 } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub fn set_gpioflpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + #[doc = "PEC enable"] + pub fn set_enpec(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub const fn gpioglpen(&self) -> super::vals::Ahb4lpenrGpioalpen { + #[doc = "General call enable"] + pub const fn engc(&self) -> bool { let val = (self.0 >> 6usize) & 0x01; - super::vals::Ahb4lpenrGpioalpen(val as u8) + val != 0 } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub fn set_gpioglpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); + #[doc = "General call enable"] + pub fn set_engc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub const fn gpiohlpen(&self) -> super::vals::Ahb4lpenrGpioalpen { + #[doc = "Clock stretching disable (Slave mode)"] + pub const fn nostretch(&self) -> bool { let val = (self.0 >> 7usize) & 0x01; - super::vals::Ahb4lpenrGpioalpen(val as u8) + val != 0 } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub fn set_gpiohlpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); + #[doc = "Clock stretching disable (Slave mode)"] + pub fn set_nostretch(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub const fn gpioilpen(&self) -> super::vals::Ahb4lpenrGpioalpen { + #[doc = "Start generation"] + pub const fn start(&self) -> super::vals::Start { let val = (self.0 >> 8usize) & 0x01; - super::vals::Ahb4lpenrGpioalpen(val as u8) + super::vals::Start(val as u8) } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub fn set_gpioilpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { + #[doc = "Start generation"] + pub fn set_start(&mut self, val: super::vals::Start) { self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub const fn gpiojlpen(&self) -> super::vals::Ahb4lpenrGpioalpen { + #[doc = "Stop generation"] + pub const fn stop(&self) -> super::vals::Stop { let val = (self.0 >> 9usize) & 0x01; - super::vals::Ahb4lpenrGpioalpen(val as u8) + super::vals::Stop(val as u8) } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub fn set_gpiojlpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { + #[doc = "Stop generation"] + pub fn set_stop(&mut self, val: super::vals::Stop) { self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub const fn gpioklpen(&self) -> super::vals::Ahb4lpenrGpioalpen { + #[doc = "Acknowledge enable"] + pub const fn ack(&self) -> bool { let val = (self.0 >> 10usize) & 0x01; - super::vals::Ahb4lpenrGpioalpen(val as u8) - } - #[doc = "GPIO peripheral clock enable during CSleep mode"] - pub fn set_gpioklpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); - } - #[doc = "CRC peripheral clock enable during CSleep mode"] - pub const fn crclpen(&self) -> super::vals::Ahb4lpenrGpioalpen { - let val = (self.0 >> 19usize) & 0x01; - super::vals::Ahb4lpenrGpioalpen(val as u8) + val != 0 } - #[doc = "CRC peripheral clock enable during CSleep mode"] - pub fn set_crclpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { - self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); + #[doc = "Acknowledge enable"] + pub fn set_ack(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); } - #[doc = "BDMA Clock Enable During CSleep Mode"] - pub const fn bdmalpen(&self) -> super::vals::Ahb4lpenrGpioalpen { - let val = (self.0 >> 21usize) & 0x01; - super::vals::Ahb4lpenrGpioalpen(val as u8) + #[doc = "Acknowledge/PEC Position (for data reception)"] + pub const fn pos(&self) -> super::vals::Pos { + let val = (self.0 >> 11usize) & 0x01; + super::vals::Pos(val as u8) } - #[doc = "BDMA Clock Enable During CSleep Mode"] - pub fn set_bdmalpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); + #[doc = "Acknowledge/PEC Position (for data reception)"] + pub fn set_pos(&mut self, val: super::vals::Pos) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); } - #[doc = "ADC3 Peripheral Clocks Enable During CSleep Mode"] - pub const fn adc3lpen(&self) -> super::vals::Ahb4lpenrGpioalpen { - let val = (self.0 >> 24usize) & 0x01; - super::vals::Ahb4lpenrGpioalpen(val as u8) + #[doc = "Packet error checking"] + pub const fn pec(&self) -> bool { + let val = (self.0 >> 12usize) & 0x01; + val != 0 } - #[doc = "ADC3 Peripheral Clocks Enable During CSleep Mode"] - pub fn set_adc3lpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { - self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); + #[doc = "Packet error checking"] + pub fn set_pec(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); } - #[doc = "Backup RAM Clock Enable During CSleep Mode"] - pub const fn bkpramlpen(&self) -> super::vals::Ahb4lpenrGpioalpen { - let val = (self.0 >> 28usize) & 0x01; - super::vals::Ahb4lpenrGpioalpen(val as u8) + #[doc = "SMBus alert"] + pub const fn alert(&self) -> super::vals::Alert { + let val = (self.0 >> 13usize) & 0x01; + super::vals::Alert(val as u8) } - #[doc = "Backup RAM Clock Enable During CSleep Mode"] - pub fn set_bkpramlpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { - self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); + #[doc = "SMBus alert"] + pub fn set_alert(&mut self, val: super::vals::Alert) { + self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize); } - #[doc = "SRAM4 Clock Enable During CSleep Mode"] - pub const fn sram4lpen(&self) -> super::vals::Ahb4lpenrGpioalpen { - let val = (self.0 >> 29usize) & 0x01; - super::vals::Ahb4lpenrGpioalpen(val as u8) + #[doc = "Software reset"] + pub const fn swrst(&self) -> bool { + let val = (self.0 >> 15usize) & 0x01; + val != 0 } - #[doc = "SRAM4 Clock Enable During CSleep Mode"] - pub fn set_sram4lpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { - self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); + #[doc = "Software reset"] + pub fn set_swrst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); } } - impl Default for Ahb4lpenr { - fn default() -> Ahb4lpenr { - Ahb4lpenr(0) + impl Default for Cr1 { + fn default() -> Cr1 { + Cr1(0) } } - #[doc = "RCC Clock Recovery RC Register"] + } + pub mod vals { + use crate::generic::*; #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Crrcr(pub u32); - impl Crrcr { - #[doc = "Internal RC 48 MHz clock calibration"] - pub const fn hsi48cal(&self) -> u16 { - let val = (self.0 >> 0usize) & 0x03ff; - val as u16 - } - #[doc = "Internal RC 48 MHz clock calibration"] - pub fn set_hsi48cal(&mut self, val: u16) { - self.0 = (self.0 & !(0x03ff << 0usize)) | (((val as u32) & 0x03ff) << 0usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Smbus(pub u8); + impl Smbus { + #[doc = "I2C Mode"] + pub const I2C: Self = Self(0); + #[doc = "SMBus"] + pub const SMBUS: Self = Self(0x01); } - impl Default for Crrcr { - fn default() -> Crrcr { - Crrcr(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Start(pub u8); + impl Start { + #[doc = "No Start generation"] + pub const NOSTART: Self = Self(0); + #[doc = "In master mode: repeated start generation, in slave mode: start generation when bus is free"] + pub const START: Self = Self(0x01); } - #[doc = "RCC Domain 2 Clock Configuration Register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct D2cfgr(pub u32); - impl D2cfgr { - #[doc = "D2 domain APB1 prescaler"] - pub const fn d2ppre1(&self) -> super::vals::D2ppre1 { - let val = (self.0 >> 4usize) & 0x07; - super::vals::D2ppre1(val as u8) - } - #[doc = "D2 domain APB1 prescaler"] - pub fn set_d2ppre1(&mut self, val: super::vals::D2ppre1) { - self.0 = (self.0 & !(0x07 << 4usize)) | (((val.0 as u32) & 0x07) << 4usize); - } - #[doc = "D2 domain APB2 prescaler"] - pub const fn d2ppre2(&self) -> super::vals::D2ppre1 { - let val = (self.0 >> 8usize) & 0x07; - super::vals::D2ppre1(val as u8) - } - #[doc = "D2 domain APB2 prescaler"] - pub fn set_d2ppre2(&mut self, val: super::vals::D2ppre1) { - self.0 = (self.0 & !(0x07 << 8usize)) | (((val.0 as u32) & 0x07) << 8usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Addmode(pub u8); + impl Addmode { + #[doc = "7-bit slave address"] + pub const ADD7: Self = Self(0); + #[doc = "10-bit slave address"] + pub const ADD10: Self = Self(0x01); } - impl Default for D2cfgr { - fn default() -> D2cfgr { - D2cfgr(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Stop(pub u8); + impl Stop { + #[doc = "No Stop generation"] + pub const NOSTOP: Self = Self(0); + #[doc = "In master mode: stop generation after current byte/start, in slave mode: release SCL and SDA after current byte"] + pub const STOP: Self = Self(0x01); } - #[doc = "RCC Clock Source Interrupt Flag Register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cifr(pub u32); - impl Cifr { - #[doc = "LSI ready Interrupt Flag"] - pub const fn lsirdyf(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; - val != 0 - } - #[doc = "LSI ready Interrupt Flag"] - pub fn set_lsirdyf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); - } - #[doc = "LSE ready Interrupt Flag"] - pub const fn lserdyf(&self) -> bool { - let val = (self.0 >> 1usize) & 0x01; - val != 0 - } - #[doc = "LSE ready Interrupt Flag"] - pub fn set_lserdyf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); - } - #[doc = "HSI ready Interrupt Flag"] - pub const fn hsirdyf(&self) -> bool { - let val = (self.0 >> 2usize) & 0x01; - val != 0 - } - #[doc = "HSI ready Interrupt Flag"] - pub fn set_hsirdyf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); - } - #[doc = "HSE ready Interrupt Flag"] - pub const fn hserdyf(&self) -> bool { - let val = (self.0 >> 3usize) & 0x01; - val != 0 - } - #[doc = "HSE ready Interrupt Flag"] - pub fn set_hserdyf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); - } - #[doc = "CSI ready Interrupt Flag"] - pub const fn csirdy(&self) -> bool { - let val = (self.0 >> 4usize) & 0x01; - val != 0 - } - #[doc = "CSI ready Interrupt Flag"] - pub fn set_csirdy(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); - } - #[doc = "RC48 ready Interrupt Flag"] - pub const fn hsi48rdyf(&self) -> bool { - let val = (self.0 >> 5usize) & 0x01; - val != 0 - } - #[doc = "RC48 ready Interrupt Flag"] - pub fn set_hsi48rdyf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); - } - #[doc = "PLL1 ready Interrupt Flag"] - pub fn pllrdyf(&self, n: usize) -> bool { - assert!(n < 3usize); - let offs = 6usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; - val != 0 - } - #[doc = "PLL1 ready Interrupt Flag"] - pub fn set_pllrdyf(&mut self, n: usize, val: bool) { - assert!(n < 3usize); - let offs = 6usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); - } - #[doc = "LSE clock security system Interrupt Flag"] - pub const fn lsecssf(&self) -> bool { - let val = (self.0 >> 9usize) & 0x01; - val != 0 - } - #[doc = "LSE clock security system Interrupt Flag"] - pub fn set_lsecssf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); - } - #[doc = "HSE clock security system Interrupt Flag"] - pub const fn hsecssf(&self) -> bool { - let val = (self.0 >> 10usize) & 0x01; - val != 0 - } - #[doc = "HSE clock security system Interrupt Flag"] - pub fn set_hsecssf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Pos(pub u8); + impl Pos { + #[doc = "ACK bit controls the (N)ACK of the current byte being received"] + pub const CURRENT: Self = Self(0); + #[doc = "ACK bit controls the (N)ACK of the next byte to be received"] + pub const NEXT: Self = Self(0x01); } - impl Default for Cifr { - fn default() -> Cifr { - Cifr(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Dnf(pub u8); + impl Dnf { + #[doc = "Digital filter disabled"] + pub const NOFILTER: Self = Self(0); + #[doc = "Digital filter enabled and filtering capability up to 1 tI2CCLK"] + pub const FILTER1: Self = Self(0x01); + #[doc = "Digital filter enabled and filtering capability up to 2 tI2CCLK"] + pub const FILTER2: Self = Self(0x02); + #[doc = "Digital filter enabled and filtering capability up to 3 tI2CCLK"] + pub const FILTER3: Self = Self(0x03); + #[doc = "Digital filter enabled and filtering capability up to 4 tI2CCLK"] + pub const FILTER4: Self = Self(0x04); + #[doc = "Digital filter enabled and filtering capability up to 5 tI2CCLK"] + pub const FILTER5: Self = Self(0x05); + #[doc = "Digital filter enabled and filtering capability up to 6 tI2CCLK"] + pub const FILTER6: Self = Self(0x06); + #[doc = "Digital filter enabled and filtering capability up to 7 tI2CCLK"] + pub const FILTER7: Self = Self(0x07); + #[doc = "Digital filter enabled and filtering capability up to 8 tI2CCLK"] + pub const FILTER8: Self = Self(0x08); + #[doc = "Digital filter enabled and filtering capability up to 9 tI2CCLK"] + pub const FILTER9: Self = Self(0x09); + #[doc = "Digital filter enabled and filtering capability up to 10 tI2CCLK"] + pub const FILTER10: Self = Self(0x0a); + #[doc = "Digital filter enabled and filtering capability up to 11 tI2CCLK"] + pub const FILTER11: Self = Self(0x0b); + #[doc = "Digital filter enabled and filtering capability up to 12 tI2CCLK"] + pub const FILTER12: Self = Self(0x0c); + #[doc = "Digital filter enabled and filtering capability up to 13 tI2CCLK"] + pub const FILTER13: Self = Self(0x0d); + #[doc = "Digital filter enabled and filtering capability up to 14 tI2CCLK"] + pub const FILTER14: Self = Self(0x0e); + #[doc = "Digital filter enabled and filtering capability up to 15 tI2CCLK"] + pub const FILTER15: Self = Self(0x0f); } - #[doc = "RCC APB4 Clock Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Alert(pub u8); + impl Alert { + #[doc = "SMBA pin released high"] + pub const RELEASE: Self = Self(0); + #[doc = "SMBA pin driven low"] + pub const DRIVE: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct FS(pub u8); + impl FS { + #[doc = "Standard mode I2C"] + pub const STANDARD: Self = Self(0); + #[doc = "Fast mode I2C"] + pub const FAST: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Duty(pub u8); + impl Duty { + #[doc = "Duty cycle t_low/t_high = 2/1"] + pub const DUTY2_1: Self = Self(0); + #[doc = "Duty cycle t_low/t_high = 16/9"] + pub const DUTY16_9: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Sb(pub u8); + impl Sb { + #[doc = "No Start condition"] + pub const NOSTART: Self = Self(0); + #[doc = "Start condition generated"] + pub const START: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Smbtype(pub u8); + impl Smbtype { + #[doc = "SMBus Device"] + pub const DEVICE: Self = Self(0); + #[doc = "SMBus Host"] + pub const HOST: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Endual(pub u8); + impl Endual { + #[doc = "Single addressing mode"] + pub const SINGLE: Self = Self(0); + #[doc = "Dual addressing mode"] + pub const DUAL: Self = Self(0x01); + } + } +} +pub mod sdmmc_v2 { + use crate::generic::*; + #[doc = "SDMMC"] + #[derive(Copy, Clone)] + pub struct Sdmmc(pub *mut u8); + unsafe impl Send for Sdmmc {} + unsafe impl Sync for Sdmmc {} + impl Sdmmc { + #[doc = "SDMMC power control register"] + pub fn power(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(0usize)) } + } + #[doc = "The SDMMC_CLKCR register controls the SDMMC_CK output clock, the SDMMC_RX_CLK receive clock, and the bus width."] + pub fn clkcr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(4usize)) } + } + #[doc = "The SDMMC_ARGR register contains a 32-bit command argument, which is sent to a card as part of a command message."] + pub fn argr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(8usize)) } + } + #[doc = "The SDMMC_CMDR register contains the command index and command type bits. The command index is sent to a card as part of a command message. The command type bits control the command path state machine (CPSM)."] + pub fn cmdr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(12usize)) } + } + #[doc = "SDMMC command response register"] + pub fn respcmdr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(16usize)) } + } + #[doc = "The SDMMC_RESP1/2/3/4R registers contain the status of a card, which is part of the received response."] + pub fn respr(self, n: usize) -> Reg { + assert!(n < 4usize); + unsafe { Reg::from_ptr(self.0.add(20usize + n * 4usize)) } + } + #[doc = "The SDMMC_DTIMER register contains the data timeout period, in card bus clock periods. A counter loads the value from the SDMMC_DTIMER register, and starts decrementing when the data path state machine (DPSM) enters the Wait_R or Busy state. If the timer reaches 0 while the DPSM is in either of these states, the timeout status flag is set."] + pub fn dtimer(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(36usize)) } + } + #[doc = "The SDMMC_DLENR register contains the number of data bytes to be transferred. The value is loaded into the data counter when data transfer starts."] + pub fn dlenr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(40usize)) } + } + #[doc = "The SDMMC_DCTRL register control the data path state machine (DPSM)."] + pub fn dctrl(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(44usize)) } + } + #[doc = "The SDMMC_DCNTR register loads the value from the data length register (see SDMMC_DLENR) when the DPSM moves from the Idle state to the Wait_R or Wait_S state. As data is transferred, the counter decrements the value until it reaches 0. The DPSM then moves to the Idle state and when there has been no error, the data status end flag (DATAEND) is set."] + pub fn dcntr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(48usize)) } + } + #[doc = "The SDMMC_STAR register is a read-only register. It contains two types of flag:Static flags (bits [29,21,11:0]): these bits remain asserted until they are cleared by writing to the SDMMC interrupt Clear register (see SDMMC_ICR)Dynamic flags (bits [20:12]): these bits change state depending on the state of the underlying logic (for example, FIFO full and empty flags are asserted and de-asserted as data while written to the FIFO)"] + pub fn star(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(52usize)) } + } + #[doc = "The SDMMC_ICR register is a write-only register. Writing a bit with 1 clears the corresponding bit in the SDMMC_STAR status register."] + pub fn icr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(56usize)) } + } + #[doc = "The interrupt mask register determines which status flags generate an interrupt request by setting the corresponding bit to 1."] + pub fn maskr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(60usize)) } + } + #[doc = "The SDMMC_ACKTIMER register contains the acknowledgment timeout period, in SDMMC_CK bus clock periods. A counter loads the value from the SDMMC_ACKTIMER register, and starts decrementing when the data path state machine (DPSM) enters the Wait_Ack state. If the timer reaches 0 while the DPSM is in this states, the acknowledgment timeout status flag is set."] + pub fn acktimer(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(64usize)) } + } + #[doc = "The receive and transmit FIFOs can be read or written as 32-bit wide registers. The FIFOs contain 32 entries on 32 sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO."] + pub fn idmactrlr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(80usize)) } + } + #[doc = "The SDMMC_IDMABSIZER register contains the buffers size when in double buffer configuration."] + pub fn idmabsizer(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(84usize)) } + } + #[doc = "The SDMMC_IDMABASE0R register contains the memory buffer base address in single buffer configuration and the buffer 0 base address in double buffer configuration."] + pub fn idmabase0r(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(88usize)) } + } + #[doc = "The SDMMC_IDMABASE1R register contains the double buffer configuration second buffer memory base address."] + pub fn idmabase1r(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(92usize)) } + } + #[doc = "The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO.When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated."] + pub fn fifor(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(128usize)) } + } + #[doc = "SDMMC IP version register"] + pub fn ver(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(1012usize)) } + } + #[doc = "SDMMC IP identification register"] + pub fn id(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(1016usize)) } + } + } + pub mod regs { + use crate::generic::*; + #[doc = "The SDMMC_DTIMER register contains the data timeout period, in card bus clock periods. A counter loads the value from the SDMMC_DTIMER register, and starts decrementing when the data path state machine (DPSM) enters the Wait_R or Busy state. If the timer reaches 0 while the DPSM is in either of these states, the timeout status flag is set."] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Apb4enr(pub u32); - impl Apb4enr { - #[doc = "SYSCFG peripheral clock enable"] - pub const fn syscfgen(&self) -> super::vals::Apb4enrSyscfgen { - let val = (self.0 >> 1usize) & 0x01; - super::vals::Apb4enrSyscfgen(val as u8) - } - #[doc = "SYSCFG peripheral clock enable"] - pub fn set_syscfgen(&mut self, val: super::vals::Apb4enrSyscfgen) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); - } - #[doc = "LPUART1 Peripheral Clocks Enable"] - pub const fn lpuart1en(&self) -> super::vals::Apb4enrSyscfgen { - let val = (self.0 >> 3usize) & 0x01; - super::vals::Apb4enrSyscfgen(val as u8) + pub struct Dtimer(pub u32); + impl Dtimer { + #[doc = "Data and R1b busy timeout period This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0). Data and R1b busy timeout period expressed in card bus clock periods."] + pub const fn datatime(&self) -> u32 { + let val = (self.0 >> 0usize) & 0xffff_ffff; + val as u32 } - #[doc = "LPUART1 Peripheral Clocks Enable"] - pub fn set_lpuart1en(&mut self, val: super::vals::Apb4enrSyscfgen) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); + #[doc = "Data and R1b busy timeout period This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0). Data and R1b busy timeout period expressed in card bus clock periods."] + pub fn set_datatime(&mut self, val: u32) { + self.0 = + (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); } - #[doc = "SPI6 Peripheral Clocks Enable"] - pub const fn spi6en(&self) -> super::vals::Apb4enrSyscfgen { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Apb4enrSyscfgen(val as u8) + } + impl Default for Dtimer { + fn default() -> Dtimer { + Dtimer(0) } - #[doc = "SPI6 Peripheral Clocks Enable"] - pub fn set_spi6en(&mut self, val: super::vals::Apb4enrSyscfgen) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + } + #[doc = "The SDMMC_DLENR register contains the number of data bytes to be transferred. The value is loaded into the data counter when data transfer starts."] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Dlenr(pub u32); + impl Dlenr { + #[doc = "Data length value This register can only be written by firmware when DPSM is inactive (DPSMACT = 0). Number of data bytes to be transferred. When DDR = 1 DATALENGTH is truncated to a multiple of 2. (The last odd byte is not transfered) When DATALENGTH = 0 no data will be transfered, when requested by a CPSMEN and CMDTRANS = 1 also no command will be transfered. DTEN and CPSMEN are cleared to 0."] + pub const fn datalength(&self) -> u32 { + let val = (self.0 >> 0usize) & 0x01ff_ffff; + val as u32 } - #[doc = "I2C4 Peripheral Clocks Enable"] - pub const fn i2c4en(&self) -> super::vals::Apb4enrSyscfgen { - let val = (self.0 >> 7usize) & 0x01; - super::vals::Apb4enrSyscfgen(val as u8) + #[doc = "Data length value This register can only be written by firmware when DPSM is inactive (DPSMACT = 0). Number of data bytes to be transferred. When DDR = 1 DATALENGTH is truncated to a multiple of 2. (The last odd byte is not transfered) When DATALENGTH = 0 no data will be transfered, when requested by a CPSMEN and CMDTRANS = 1 also no command will be transfered. DTEN and CPSMEN are cleared to 0."] + pub fn set_datalength(&mut self, val: u32) { + self.0 = + (self.0 & !(0x01ff_ffff << 0usize)) | (((val as u32) & 0x01ff_ffff) << 0usize); } - #[doc = "I2C4 Peripheral Clocks Enable"] - pub fn set_i2c4en(&mut self, val: super::vals::Apb4enrSyscfgen) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); + } + impl Default for Dlenr { + fn default() -> Dlenr { + Dlenr(0) } - #[doc = "LPTIM2 Peripheral Clocks Enable"] - pub const fn lptim2en(&self) -> super::vals::Apb4enrSyscfgen { - let val = (self.0 >> 9usize) & 0x01; - super::vals::Apb4enrSyscfgen(val as u8) + } + #[doc = "The SDMMC_ARGR register contains a 32-bit command argument, which is sent to a card as part of a command message."] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Argr(pub u32); + impl Argr { + #[doc = "Command argument. These bits can only be written by firmware when CPSM is disabled (CPSMEN = 0). Command argument sent to a card as part of a command message. If a command contains an argument, it must be loaded into this register before writing a command to the command register."] + pub const fn cmdarg(&self) -> u32 { + let val = (self.0 >> 0usize) & 0xffff_ffff; + val as u32 } - #[doc = "LPTIM2 Peripheral Clocks Enable"] - pub fn set_lptim2en(&mut self, val: super::vals::Apb4enrSyscfgen) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + #[doc = "Command argument. These bits can only be written by firmware when CPSM is disabled (CPSMEN = 0). Command argument sent to a card as part of a command message. If a command contains an argument, it must be loaded into this register before writing a command to the command register."] + pub fn set_cmdarg(&mut self, val: u32) { + self.0 = + (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); } - #[doc = "LPTIM3 Peripheral Clocks Enable"] - pub const fn lptim3en(&self) -> super::vals::Apb4enrSyscfgen { - let val = (self.0 >> 10usize) & 0x01; - super::vals::Apb4enrSyscfgen(val as u8) + } + impl Default for Argr { + fn default() -> Argr { + Argr(0) } - #[doc = "LPTIM3 Peripheral Clocks Enable"] - pub fn set_lptim3en(&mut self, val: super::vals::Apb4enrSyscfgen) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); + } + #[doc = "The interrupt mask register determines which status flags generate an interrupt request by setting the corresponding bit to 1."] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Maskr(pub u32); + impl Maskr { + #[doc = "Command CRC fail interrupt enable Set and cleared by software to enable/disable interrupt caused by command CRC failure."] + pub const fn ccrcfailie(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 } - #[doc = "LPTIM4 Peripheral Clocks Enable"] - pub const fn lptim4en(&self) -> super::vals::Apb4enrSyscfgen { - let val = (self.0 >> 11usize) & 0x01; - super::vals::Apb4enrSyscfgen(val as u8) + #[doc = "Command CRC fail interrupt enable Set and cleared by software to enable/disable interrupt caused by command CRC failure."] + pub fn set_ccrcfailie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "LPTIM4 Peripheral Clocks Enable"] - pub fn set_lptim4en(&mut self, val: super::vals::Apb4enrSyscfgen) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); + #[doc = "Data CRC fail interrupt enable Set and cleared by software to enable/disable interrupt caused by data CRC failure."] + pub const fn dcrcfailie(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; + val != 0 } - #[doc = "LPTIM5 Peripheral Clocks Enable"] - pub const fn lptim5en(&self) -> super::vals::Apb4enrSyscfgen { - let val = (self.0 >> 12usize) & 0x01; - super::vals::Apb4enrSyscfgen(val as u8) + #[doc = "Data CRC fail interrupt enable Set and cleared by software to enable/disable interrupt caused by data CRC failure."] + pub fn set_dcrcfailie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - #[doc = "LPTIM5 Peripheral Clocks Enable"] - pub fn set_lptim5en(&mut self, val: super::vals::Apb4enrSyscfgen) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); + #[doc = "Command timeout interrupt enable Set and cleared by software to enable/disable interrupt caused by command timeout."] + pub const fn ctimeoutie(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; + val != 0 } - #[doc = "COMP1/2 peripheral clock enable"] - pub const fn comp12en(&self) -> super::vals::Apb4enrSyscfgen { - let val = (self.0 >> 14usize) & 0x01; - super::vals::Apb4enrSyscfgen(val as u8) + #[doc = "Command timeout interrupt enable Set and cleared by software to enable/disable interrupt caused by command timeout."] + pub fn set_ctimeoutie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); } - #[doc = "COMP1/2 peripheral clock enable"] - pub fn set_comp12en(&mut self, val: super::vals::Apb4enrSyscfgen) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); + #[doc = "Data timeout interrupt enable Set and cleared by software to enable/disable interrupt caused by data timeout."] + pub const fn dtimeoutie(&self) -> bool { + let val = (self.0 >> 3usize) & 0x01; + val != 0 } - #[doc = "VREF peripheral clock enable"] - pub const fn vrefen(&self) -> super::vals::Apb4enrSyscfgen { - let val = (self.0 >> 15usize) & 0x01; - super::vals::Apb4enrSyscfgen(val as u8) + #[doc = "Data timeout interrupt enable Set and cleared by software to enable/disable interrupt caused by data timeout."] + pub fn set_dtimeoutie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); } - #[doc = "VREF peripheral clock enable"] - pub fn set_vrefen(&mut self, val: super::vals::Apb4enrSyscfgen) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + #[doc = "Tx FIFO underrun error interrupt enable Set and cleared by software to enable/disable interrupt caused by Tx FIFO underrun error."] + pub const fn txunderrie(&self) -> bool { + let val = (self.0 >> 4usize) & 0x01; + val != 0 } - #[doc = "RTC APB Clock Enable"] - pub const fn rtcapben(&self) -> super::vals::Apb4enrSyscfgen { - let val = (self.0 >> 16usize) & 0x01; - super::vals::Apb4enrSyscfgen(val as u8) + #[doc = "Tx FIFO underrun error interrupt enable Set and cleared by software to enable/disable interrupt caused by Tx FIFO underrun error."] + pub fn set_txunderrie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); } - #[doc = "RTC APB Clock Enable"] - pub fn set_rtcapben(&mut self, val: super::vals::Apb4enrSyscfgen) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + #[doc = "Rx FIFO overrun error interrupt enable Set and cleared by software to enable/disable interrupt caused by Rx FIFO overrun error."] + pub const fn rxoverrie(&self) -> bool { + let val = (self.0 >> 5usize) & 0x01; + val != 0 } - #[doc = "SAI4 Peripheral Clocks Enable"] - pub const fn sai4en(&self) -> super::vals::Apb4enrSyscfgen { - let val = (self.0 >> 21usize) & 0x01; - super::vals::Apb4enrSyscfgen(val as u8) + #[doc = "Rx FIFO overrun error interrupt enable Set and cleared by software to enable/disable interrupt caused by Rx FIFO overrun error."] + pub fn set_rxoverrie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); } - #[doc = "SAI4 Peripheral Clocks Enable"] - pub fn set_sai4en(&mut self, val: super::vals::Apb4enrSyscfgen) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); + #[doc = "Command response received interrupt enable Set and cleared by software to enable/disable interrupt caused by receiving command response."] + pub const fn cmdrendie(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 } - } - impl Default for Apb4enr { - fn default() -> Apb4enr { - Apb4enr(0) + #[doc = "Command response received interrupt enable Set and cleared by software to enable/disable interrupt caused by receiving command response."] + pub fn set_cmdrendie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - } - #[doc = "RCC Clock Configuration Register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cfgr(pub u32); - impl Cfgr { - #[doc = "System clock switch"] - pub const fn sw(&self) -> super::vals::Sw { - let val = (self.0 >> 0usize) & 0x07; - super::vals::Sw(val as u8) + #[doc = "Command sent interrupt enable Set and cleared by software to enable/disable interrupt caused by sending command."] + pub const fn cmdsentie(&self) -> bool { + let val = (self.0 >> 7usize) & 0x01; + val != 0 } - #[doc = "System clock switch"] - pub fn set_sw(&mut self, val: super::vals::Sw) { - self.0 = (self.0 & !(0x07 << 0usize)) | (((val.0 as u32) & 0x07) << 0usize); + #[doc = "Command sent interrupt enable Set and cleared by software to enable/disable interrupt caused by sending command."] + pub fn set_cmdsentie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); } - #[doc = "System clock switch status"] - pub const fn sws(&self) -> u8 { - let val = (self.0 >> 3usize) & 0x07; - val as u8 + #[doc = "Data end interrupt enable Set and cleared by software to enable/disable interrupt caused by data end."] + pub const fn dataendie(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 } - #[doc = "System clock switch status"] - pub fn set_sws(&mut self, val: u8) { - self.0 = (self.0 & !(0x07 << 3usize)) | (((val as u32) & 0x07) << 3usize); + #[doc = "Data end interrupt enable Set and cleared by software to enable/disable interrupt caused by data end."] + pub fn set_dataendie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); } - #[doc = "System clock selection after a wake up from system Stop"] - pub const fn stopwuck(&self) -> super::vals::Stopwuck { - let val = (self.0 >> 6usize) & 0x01; - super::vals::Stopwuck(val as u8) + #[doc = "Data hold interrupt enable Set and cleared by software to enable/disable the interrupt generated when sending new data is hold in the DPSM Wait_S state."] + pub const fn dholdie(&self) -> bool { + let val = (self.0 >> 9usize) & 0x01; + val != 0 } - #[doc = "System clock selection after a wake up from system Stop"] - pub fn set_stopwuck(&mut self, val: super::vals::Stopwuck) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); + #[doc = "Data hold interrupt enable Set and cleared by software to enable/disable the interrupt generated when sending new data is hold in the DPSM Wait_S state."] + pub fn set_dholdie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); } - #[doc = "Kernel clock selection after a wake up from system Stop"] - pub const fn stopkerwuck(&self) -> super::vals::Stopwuck { - let val = (self.0 >> 7usize) & 0x01; - super::vals::Stopwuck(val as u8) + #[doc = "Data block end interrupt enable Set and cleared by software to enable/disable interrupt caused by data block end."] + pub const fn dbckendie(&self) -> bool { + let val = (self.0 >> 10usize) & 0x01; + val != 0 } - #[doc = "Kernel clock selection after a wake up from system Stop"] - pub fn set_stopkerwuck(&mut self, val: super::vals::Stopwuck) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); + #[doc = "Data block end interrupt enable Set and cleared by software to enable/disable interrupt caused by data block end."] + pub fn set_dbckendie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); } - #[doc = "HSE division factor for RTC clock"] - pub const fn rtcpre(&self) -> u8 { - let val = (self.0 >> 8usize) & 0x3f; - val as u8 + #[doc = "Data transfer aborted interrupt enable Set and cleared by software to enable/disable interrupt caused by a data transfer being aborted."] + pub const fn dabortie(&self) -> bool { + let val = (self.0 >> 11usize) & 0x01; + val != 0 } - #[doc = "HSE division factor for RTC clock"] - pub fn set_rtcpre(&mut self, val: u8) { - self.0 = (self.0 & !(0x3f << 8usize)) | (((val as u32) & 0x3f) << 8usize); + #[doc = "Data transfer aborted interrupt enable Set and cleared by software to enable/disable interrupt caused by a data transfer being aborted."] + pub fn set_dabortie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); } - #[doc = "High Resolution Timer clock prescaler selection"] - pub const fn hrtimsel(&self) -> super::vals::Hrtimsel { + #[doc = "Tx FIFO half empty interrupt enable Set and cleared by software to enable/disable interrupt caused by Tx FIFO half empty."] + pub const fn txfifoheie(&self) -> bool { let val = (self.0 >> 14usize) & 0x01; - super::vals::Hrtimsel(val as u8) + val != 0 } - #[doc = "High Resolution Timer clock prescaler selection"] - pub fn set_hrtimsel(&mut self, val: super::vals::Hrtimsel) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); + #[doc = "Tx FIFO half empty interrupt enable Set and cleared by software to enable/disable interrupt caused by Tx FIFO half empty."] + pub fn set_txfifoheie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); } - #[doc = "Timers clocks prescaler selection"] - pub const fn timpre(&self) -> super::vals::Timpre { + #[doc = "Rx FIFO half full interrupt enable Set and cleared by software to enable/disable interrupt caused by Rx FIFO half full."] + pub const fn rxfifohfie(&self) -> bool { let val = (self.0 >> 15usize) & 0x01; - super::vals::Timpre(val as u8) - } - #[doc = "Timers clocks prescaler selection"] - pub fn set_timpre(&mut self, val: super::vals::Timpre) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + val != 0 } - #[doc = "MCO1 prescaler"] - pub const fn mco1pre(&self) -> u8 { - let val = (self.0 >> 18usize) & 0x0f; - val as u8 + #[doc = "Rx FIFO half full interrupt enable Set and cleared by software to enable/disable interrupt caused by Rx FIFO half full."] + pub fn set_rxfifohfie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); } - #[doc = "MCO1 prescaler"] - pub fn set_mco1pre(&mut self, val: u8) { - self.0 = (self.0 & !(0x0f << 18usize)) | (((val as u32) & 0x0f) << 18usize); + #[doc = "Rx FIFO full interrupt enable Set and cleared by software to enable/disable interrupt caused by Rx FIFO full."] + pub const fn rxfifofie(&self) -> bool { + let val = (self.0 >> 17usize) & 0x01; + val != 0 } - #[doc = "Micro-controller clock output 1"] - pub const fn mco1(&self) -> super::vals::Mco1 { - let val = (self.0 >> 22usize) & 0x07; - super::vals::Mco1(val as u8) + #[doc = "Rx FIFO full interrupt enable Set and cleared by software to enable/disable interrupt caused by Rx FIFO full."] + pub fn set_rxfifofie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); } - #[doc = "Micro-controller clock output 1"] - pub fn set_mco1(&mut self, val: super::vals::Mco1) { - self.0 = (self.0 & !(0x07 << 22usize)) | (((val.0 as u32) & 0x07) << 22usize); + #[doc = "Tx FIFO empty interrupt enable Set and cleared by software to enable/disable interrupt caused by Tx FIFO empty."] + pub const fn txfifoeie(&self) -> bool { + let val = (self.0 >> 18usize) & 0x01; + val != 0 } - #[doc = "MCO2 prescaler"] - pub const fn mco2pre(&self) -> u8 { - let val = (self.0 >> 25usize) & 0x0f; - val as u8 + #[doc = "Tx FIFO empty interrupt enable Set and cleared by software to enable/disable interrupt caused by Tx FIFO empty."] + pub fn set_txfifoeie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize); } - #[doc = "MCO2 prescaler"] - pub fn set_mco2pre(&mut self, val: u8) { - self.0 = (self.0 & !(0x0f << 25usize)) | (((val as u32) & 0x0f) << 25usize); + #[doc = "BUSYD0END interrupt enable Set and cleared by software to enable/disable the interrupt generated when SDMMC_D0 signal changes from busy to NOT busy following a CMD response."] + pub const fn busyd0endie(&self) -> bool { + let val = (self.0 >> 21usize) & 0x01; + val != 0 } - #[doc = "Micro-controller clock output 2"] - pub const fn mco2(&self) -> super::vals::Mco2 { - let val = (self.0 >> 29usize) & 0x07; - super::vals::Mco2(val as u8) + #[doc = "BUSYD0END interrupt enable Set and cleared by software to enable/disable the interrupt generated when SDMMC_D0 signal changes from busy to NOT busy following a CMD response."] + pub fn set_busyd0endie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); } - #[doc = "Micro-controller clock output 2"] - pub fn set_mco2(&mut self, val: super::vals::Mco2) { - self.0 = (self.0 & !(0x07 << 29usize)) | (((val.0 as u32) & 0x07) << 29usize); + #[doc = "SDIO mode interrupt received interrupt enable Set and cleared by software to enable/disable the interrupt generated when receiving the SDIO mode interrupt."] + pub const fn sdioitie(&self) -> bool { + let val = (self.0 >> 22usize) & 0x01; + val != 0 + } + #[doc = "SDIO mode interrupt received interrupt enable Set and cleared by software to enable/disable the interrupt generated when receiving the SDIO mode interrupt."] + pub fn set_sdioitie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); + } + #[doc = "Acknowledgment Fail interrupt enable Set and cleared by software to enable/disable interrupt caused by acknowledgment Fail."] + pub const fn ackfailie(&self) -> bool { + let val = (self.0 >> 23usize) & 0x01; + val != 0 + } + #[doc = "Acknowledgment Fail interrupt enable Set and cleared by software to enable/disable interrupt caused by acknowledgment Fail."] + pub fn set_ackfailie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize); + } + #[doc = "Acknowledgment timeout interrupt enable Set and cleared by software to enable/disable interrupt caused by acknowledgment timeout."] + pub const fn acktimeoutie(&self) -> bool { + let val = (self.0 >> 24usize) & 0x01; + val != 0 + } + #[doc = "Acknowledgment timeout interrupt enable Set and cleared by software to enable/disable interrupt caused by acknowledgment timeout."] + pub fn set_acktimeoutie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize); + } + #[doc = "Voltage switch critical timing section completion interrupt enable Set and cleared by software to enable/disable the interrupt generated when voltage switch critical timing section completion."] + pub const fn vswendie(&self) -> bool { + let val = (self.0 >> 25usize) & 0x01; + val != 0 + } + #[doc = "Voltage switch critical timing section completion interrupt enable Set and cleared by software to enable/disable the interrupt generated when voltage switch critical timing section completion."] + pub fn set_vswendie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize); + } + #[doc = "Voltage Switch clock stopped interrupt enable Set and cleared by software to enable/disable interrupt caused by Voltage Switch clock stopped."] + pub const fn ckstopie(&self) -> bool { + let val = (self.0 >> 26usize) & 0x01; + val != 0 + } + #[doc = "Voltage Switch clock stopped interrupt enable Set and cleared by software to enable/disable interrupt caused by Voltage Switch clock stopped."] + pub fn set_ckstopie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); + } + #[doc = "IDMA buffer transfer complete interrupt enable Set and cleared by software to enable/disable the interrupt generated when the IDMA has transferred all data belonging to a memory buffer."] + pub const fn idmabtcie(&self) -> bool { + let val = (self.0 >> 28usize) & 0x01; + val != 0 + } + #[doc = "IDMA buffer transfer complete interrupt enable Set and cleared by software to enable/disable the interrupt generated when the IDMA has transferred all data belonging to a memory buffer."] + pub fn set_idmabtcie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize); } } - impl Default for Cfgr { - fn default() -> Cfgr { - Cfgr(0) + impl Default for Maskr { + fn default() -> Maskr { + Maskr(0) } } - } - pub mod vals { - use crate::generic::*; + #[doc = "The receive and transmit FIFOs can be read or written as 32-bit wide registers. The FIFOs contain 32 entries on 32 sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO."] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Hsebyp(pub u8); - impl Hsebyp { - #[doc = "HSE crystal oscillator not bypassed"] - pub const NOTBYPASSED: Self = Self(0); - #[doc = "HSE crystal oscillator bypassed with external clock"] - pub const BYPASSED: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Idmactrlr(pub u32); + impl Idmactrlr { + #[doc = "IDMA enable This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."] + pub const fn idmaen(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 + } + #[doc = "IDMA enable This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."] + pub fn set_idmaen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + } + #[doc = "Buffer mode selection. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."] + pub const fn idmabmode(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; + val != 0 + } + #[doc = "Buffer mode selection. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."] + pub fn set_idmabmode(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + } + #[doc = "Double buffer mode active buffer indication This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). When IDMA is enabled this bit is toggled by hardware."] + pub const fn idmabact(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; + val != 0 + } + #[doc = "Double buffer mode active buffer indication This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). When IDMA is enabled this bit is toggled by hardware."] + pub fn set_idmabact(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct C1RsrCpurstfr(pub u8); - impl C1RsrCpurstfr { - #[doc = "No reset occoured for block"] - pub const NORESETOCCOURED: Self = Self(0); - #[doc = "Reset occoured for block"] - pub const RESETOCCOURRED: Self = Self(0x01); + impl Default for Idmactrlr { + fn default() -> Idmactrlr { + Idmactrlr(0) + } } + #[doc = "The SDMMC_RESP1/2/3/4R registers contain the status of a card, which is part of the received response."] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ahb1lpenrDma1lpen(pub u8); - impl Ahb1lpenrDma1lpen { - #[doc = "The selected clock is disabled during csleep mode"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled during csleep mode"] - pub const ENABLED: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Resp3r(pub u32); + impl Resp3r { + #[doc = "see Table404."] + pub const fn cardstatus3(&self) -> u32 { + let val = (self.0 >> 0usize) & 0xffff_ffff; + val as u32 + } + #[doc = "see Table404."] + pub fn set_cardstatus3(&mut self, val: u32) { + self.0 = + (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Fmcsel(pub u8); - impl Fmcsel { - #[doc = "rcc_hclk3 selected as peripheral clock"] - pub const RCC_HCLK3: Self = Self(0); - #[doc = "pll1_q selected as peripheral clock"] - pub const PLL1_Q: Self = Self(0x01); - #[doc = "pll2_r selected as peripheral clock"] - pub const PLL2_R: Self = Self(0x02); - #[doc = "PER selected as peripheral clock"] - pub const PER: Self = Self(0x03); + impl Default for Resp3r { + fn default() -> Resp3r { + Resp3r(0) + } } + #[doc = "The SDMMC_RESP1/2/3/4R registers contain the status of a card, which is part of the received response."] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Apb2enrTim1en(pub u8); - impl Apb2enrTim1en { - #[doc = "The selected clock is disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled"] - pub const ENABLED: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Resp1r(pub u32); + impl Resp1r { + #[doc = "see Table 432"] + pub const fn cardstatus1(&self) -> u32 { + let val = (self.0 >> 0usize) & 0xffff_ffff; + val as u32 + } + #[doc = "see Table 432"] + pub fn set_cardstatus1(&mut self, val: u32) { + self.0 = + (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Pll1rge(pub u8); - impl Pll1rge { - #[doc = "Frequency is between 1 and 2 MHz"] - pub const RANGE1: Self = Self(0); - #[doc = "Frequency is between 2 and 4 MHz"] - pub const RANGE2: Self = Self(0x01); - #[doc = "Frequency is between 4 and 8 MHz"] - pub const RANGE4: Self = Self(0x02); - #[doc = "Frequency is between 8 and 16 MHz"] - pub const RANGE8: Self = Self(0x03); + impl Default for Resp1r { + fn default() -> Resp1r { + Resp1r(0) + } } + #[doc = "SDMMC command response register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Sw(pub u8); - impl Sw { - #[doc = "HSI selected as system clock"] - pub const HSI: Self = Self(0); - #[doc = "CSI selected as system clock"] - pub const CSI: Self = Self(0x01); - #[doc = "HSE selected as system clock"] - pub const HSE: Self = Self(0x02); - #[doc = "PLL1 selected as system clock"] - pub const PLL1: Self = Self(0x03); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Respcmdr(pub u32); + impl Respcmdr { + #[doc = "Response command index"] + pub const fn respcmd(&self) -> u8 { + let val = (self.0 >> 0usize) & 0x3f; + val as u8 + } + #[doc = "Response command index"] + pub fn set_respcmd(&mut self, val: u8) { + self.0 = (self.0 & !(0x3f << 0usize)) | (((val as u32) & 0x3f) << 0usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Pllsrc(pub u8); - impl Pllsrc { - #[doc = "HSI selected as PLL clock"] - pub const HSI: Self = Self(0); - #[doc = "CSI selected as PLL clock"] - pub const CSI: Self = Self(0x01); - #[doc = "HSE selected as PLL clock"] - pub const HSE: Self = Self(0x02); - #[doc = "No clock sent to DIVMx dividers and PLLs"] - pub const NONE: Self = Self(0x03); + impl Default for Respcmdr { + fn default() -> Respcmdr { + Respcmdr(0) + } } + #[doc = "The SDMMC_IDMABSIZER register contains the buffers size when in double buffer configuration."] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct C1Apb1henrCrsen(pub u8); - impl C1Apb1henrCrsen { - #[doc = "The selected clock is disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled"] - pub const ENABLED: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Idmabsizer(pub u32); + impl Idmabsizer { + #[doc = "Number of transfers per buffer. This 8-bit value shall be multiplied by 8 to get the size of the buffer in 32-bit words and by 32 to get the size of the buffer in bytes. Example: IDMABNDT = 0x01: buffer size = 8 words = 32 bytes. These bits can only be written by firmware when DPSM is inactive (DPSMACT = 0)."] + pub const fn idmabndt(&self) -> u8 { + let val = (self.0 >> 5usize) & 0xff; + val as u8 + } + #[doc = "Number of transfers per buffer. This 8-bit value shall be multiplied by 8 to get the size of the buffer in 32-bit words and by 32 to get the size of the buffer in bytes. Example: IDMABNDT = 0x01: buffer size = 8 words = 32 bytes. These bits can only be written by firmware when DPSM is inactive (DPSMACT = 0)."] + pub fn set_idmabndt(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 5usize)) | (((val as u32) & 0xff) << 5usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct C1Ahb3enrMdmaen(pub u8); - impl C1Ahb3enrMdmaen { - #[doc = "The selected clock is disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled"] - pub const ENABLED: Self = Self(0x01); + impl Default for Idmabsizer { + fn default() -> Idmabsizer { + Idmabsizer(0) + } } + #[doc = "The SDMMC_DCTRL register control the data path state machine (DPSM)."] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Spdifsel(pub u8); - impl Spdifsel { - #[doc = "pll1_q selected as peripheral clock"] - pub const PLL1_Q: Self = Self(0); - #[doc = "pll2_r selected as peripheral clock"] - pub const PLL2_R: Self = Self(0x01); - #[doc = "pll3_r selected as peripheral clock"] - pub const PLL3_R: Self = Self(0x02); - #[doc = "hsi_ker selected as peripheral clock"] - pub const HSI_KER: Self = Self(0x03); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Dctrl(pub u32); + impl Dctrl { + #[doc = "Data transfer enable bit This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). This bit is cleared by Hardware when data transfer completes. This bit shall only be used to transfer data when no associated data transfer command is used, i.e. shall not be used with SD or eMMC cards."] + pub const fn dten(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 + } + #[doc = "Data transfer enable bit This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). This bit is cleared by Hardware when data transfer completes. This bit shall only be used to transfer data when no associated data transfer command is used, i.e. shall not be used with SD or eMMC cards."] + pub fn set_dten(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + } + #[doc = "Data transfer direction selection This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."] + pub const fn dtdir(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; + val != 0 + } + #[doc = "Data transfer direction selection This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."] + pub fn set_dtdir(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + } + #[doc = "Data transfer mode selection. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."] + pub const fn dtmode(&self) -> u8 { + let val = (self.0 >> 2usize) & 0x03; + val as u8 + } + #[doc = "Data transfer mode selection. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."] + pub fn set_dtmode(&mut self, val: u8) { + self.0 = (self.0 & !(0x03 << 2usize)) | (((val as u32) & 0x03) << 2usize); + } + #[doc = "Data block size This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). Define the data block length when the block data transfer mode is selected: When DATALENGTH is not a multiple of DBLOCKSIZE, the transfered data is truncated at a multiple of DBLOCKSIZE. (Any remain data will not be transfered.) When DDR = 1, DBLOCKSIZE = 0000 shall not be used. (No data will be transfered)"] + pub const fn dblocksize(&self) -> u8 { + let val = (self.0 >> 4usize) & 0x0f; + val as u8 + } + #[doc = "Data block size This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). Define the data block length when the block data transfer mode is selected: When DATALENGTH is not a multiple of DBLOCKSIZE, the transfered data is truncated at a multiple of DBLOCKSIZE. (Any remain data will not be transfered.) When DDR = 1, DBLOCKSIZE = 0000 shall not be used. (No data will be transfered)"] + pub fn set_dblocksize(&mut self, val: u8) { + self.0 = (self.0 & !(0x0f << 4usize)) | (((val as u32) & 0x0f) << 4usize); + } + #[doc = "Read wait start. If this bit is set, read wait operation starts."] + pub const fn rwstart(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 + } + #[doc = "Read wait start. If this bit is set, read wait operation starts."] + pub fn set_rwstart(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + } + #[doc = "Read wait stop This bit is written by firmware and auto cleared by hardware when the DPSM moves from the READ_WAIT state to the WAIT_R or IDLE state."] + pub const fn rwstop(&self) -> bool { + let val = (self.0 >> 9usize) & 0x01; + val != 0 + } + #[doc = "Read wait stop This bit is written by firmware and auto cleared by hardware when the DPSM moves from the READ_WAIT state to the WAIT_R or IDLE state."] + pub fn set_rwstop(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + } + #[doc = "Read wait mode. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."] + pub const fn rwmod(&self) -> bool { + let val = (self.0 >> 10usize) & 0x01; + val != 0 + } + #[doc = "Read wait mode. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."] + pub fn set_rwmod(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); + } + #[doc = "SD I/O interrupt enable functions This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). If this bit is set, the DPSM enables the SD I/O card specific interrupt operation."] + pub const fn sdioen(&self) -> bool { + let val = (self.0 >> 11usize) & 0x01; + val != 0 + } + #[doc = "SD I/O interrupt enable functions This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). If this bit is set, the DPSM enables the SD I/O card specific interrupt operation."] + pub fn set_sdioen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); + } + #[doc = "Enable the reception of the boot acknowledgment. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."] + pub const fn bootacken(&self) -> bool { + let val = (self.0 >> 12usize) & 0x01; + val != 0 + } + #[doc = "Enable the reception of the boot acknowledgment. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."] + pub fn set_bootacken(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); + } + #[doc = "FIFO reset, will flush any remaining data. This bit can only be written by firmware when IDMAEN= 0 and DPSM is active (DPSMACT = 1). This bit will only take effect when a transfer error or transfer hold occurs."] + pub const fn fiforst(&self) -> bool { + let val = (self.0 >> 13usize) & 0x01; + val != 0 + } + #[doc = "FIFO reset, will flush any remaining data. This bit can only be written by firmware when IDMAEN= 0 and DPSM is active (DPSMACT = 1). This bit will only take effect when a transfer error or transfer hold occurs."] + pub fn set_fiforst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct I2c123sel(pub u8); - impl I2c123sel { - #[doc = "rcc_pclk1 selected as peripheral clock"] - pub const RCC_PCLK1: Self = Self(0); - #[doc = "pll3_r selected as peripheral clock"] - pub const PLL3_R: Self = Self(0x01); - #[doc = "hsi_ker selected as peripheral clock"] - pub const HSI_KER: Self = Self(0x02); - #[doc = "csi_ker selected as peripheral clock"] - pub const CSI_KER: Self = Self(0x03); + impl Default for Dctrl { + fn default() -> Dctrl { + Dctrl(0) + } } + #[doc = "SDMMC IP identification register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct C1Apb1lenrTim2en(pub u8); - impl C1Apb1lenrTim2en { - #[doc = "The selected clock is disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled"] - pub const ENABLED: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Id(pub u32); + impl Id { + #[doc = "SDMMC IP identification."] + pub const fn ip_id(&self) -> u32 { + let val = (self.0 >> 0usize) & 0xffff_ffff; + val as u32 + } + #[doc = "SDMMC IP identification."] + pub fn set_ip_id(&mut self, val: u32) { + self.0 = + (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Pll1fracen(pub u8); - impl Pll1fracen { - #[doc = "Reset latch to tranfer FRACN to the Sigma-Delta modulator"] - pub const RESET: Self = Self(0); - #[doc = "Set latch to tranfer FRACN to the Sigma-Delta modulator"] - pub const SET: Self = Self(0x01); + impl Default for Id { + fn default() -> Id { + Id(0) + } } + #[doc = "The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO.When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated."] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lsecssdr(pub u8); - impl Lsecssdr { - #[doc = "No failure detected on 32 kHz oscillator"] - pub const NOFAILURE: Self = Self(0); - #[doc = "Failure detected on 32 kHz oscillator"] - pub const FAILURE: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Fifor(pub u32); + impl Fifor { + #[doc = "Receive and transmit FIFO data This register can only be read or written by firmware when the DPSM is active (DPSMACT=1). The FIFO data occupies 16 entries of 32-bit words."] + pub const fn fifodata(&self) -> u32 { + let val = (self.0 >> 0usize) & 0xffff_ffff; + val as u32 + } + #[doc = "Receive and transmit FIFO data This register can only be read or written by firmware when the DPSM is active (DPSMACT=1). The FIFO data occupies 16 entries of 32-bit words."] + pub fn set_fifodata(&mut self, val: u32) { + self.0 = + (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Spi6sel(pub u8); - impl Spi6sel { - #[doc = "rcc_pclk4 selected as peripheral clock"] - pub const RCC_PCLK4: Self = Self(0); - #[doc = "pll2_q selected as peripheral clock"] - pub const PLL2_Q: Self = Self(0x01); - #[doc = "pll3_q selected as peripheral clock"] - pub const PLL3_Q: Self = Self(0x02); - #[doc = "hsi_ker selected as peripheral clock"] - pub const HSI_KER: Self = Self(0x03); - #[doc = "csi_ker selected as peripheral clock"] - pub const CSI_KER: Self = Self(0x04); - #[doc = "HSE selected as peripheral clock"] - pub const HSE: Self = Self(0x05); + impl Default for Fifor { + fn default() -> Fifor { + Fifor(0) + } } + #[doc = "The SDMMC_ACKTIMER register contains the acknowledgment timeout period, in SDMMC_CK bus clock periods. A counter loads the value from the SDMMC_ACKTIMER register, and starts decrementing when the data path state machine (DPSM) enters the Wait_Ack state. If the timer reaches 0 while the DPSM is in this states, the acknowledgment timeout status flag is set."] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Apb3lpenrLtdclpen(pub u8); - impl Apb3lpenrLtdclpen { - #[doc = "The selected clock is disabled during csleep mode"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled during csleep mode"] - pub const ENABLED: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Acktimer(pub u32); + impl Acktimer { + #[doc = "Boot acknowledgment timeout period This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). Boot acknowledgment timeout period expressed in card bus clock periods."] + pub const fn acktime(&self) -> u32 { + let val = (self.0 >> 0usize) & 0x01ff_ffff; + val as u32 + } + #[doc = "Boot acknowledgment timeout period This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). Boot acknowledgment timeout period expressed in card bus clock periods."] + pub fn set_acktime(&mut self, val: u32) { + self.0 = + (self.0 & !(0x01ff_ffff << 0usize)) | (((val as u32) & 0x01ff_ffff) << 0usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct C1Ahb1lpenrDma1lpen(pub u8); - impl C1Ahb1lpenrDma1lpen { - #[doc = "The selected clock is disabled during csleep mode"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled during csleep mode"] - pub const ENABLED: Self = Self(0x01); + impl Default for Acktimer { + fn default() -> Acktimer { + Acktimer(0) + } } + #[doc = "The SDMMC_IDMABASE1R register contains the double buffer configuration second buffer memory base address."] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Divp1en(pub u8); - impl Divp1en { - #[doc = "Clock ouput is disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "Clock output is enabled"] - pub const ENABLED: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Idmabase1r(pub u32); + impl Idmabase1r { + #[doc = "Buffer 1 memory base address, shall be word aligned (bit [1:0] +are always 0 and read only). This register can be written by firmware when DPSM is inactive (DPSMACT = 0), and can dynamically be written by firmware when DPSM active (DPSMACT = 1) and memory buffer 1 is inactive (IDMABACT = 0)."] + pub const fn idmabase1(&self) -> u32 { + let val = (self.0 >> 0usize) & 0xffff_ffff; + val as u32 + } + #[doc = "Buffer 1 memory base address, shall be word aligned (bit [1:0] +are always 0 and read only). This register can be written by firmware when DPSM is inactive (DPSMACT = 0), and can dynamically be written by firmware when DPSM active (DPSMACT = 1) and memory buffer 1 is inactive (IDMABACT = 0)."] + pub fn set_idmabase1(&mut self, val: u32) { + self.0 = + (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + } + } + impl Default for Idmabase1r { + fn default() -> Idmabase1r { + Idmabase1r(0) + } } + #[doc = "The SDMMC_CMDR register contains the command index and command type bits. The command index is sent to a card as part of a command message. The command type bits control the command path state machine (CPSM)."] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Apb4enrSyscfgen(pub u8); - impl Apb4enrSyscfgen { - #[doc = "The selected clock is disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled"] - pub const ENABLED: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lptim2sel(pub u8); - impl Lptim2sel { - #[doc = "rcc_pclk4 selected as peripheral clock"] - pub const RCC_PCLK4: Self = Self(0); - #[doc = "pll2_p selected as peripheral clock"] - pub const PLL2_P: Self = Self(0x01); - #[doc = "pll3_r selected as peripheral clock"] - pub const PLL3_R: Self = Self(0x02); - #[doc = "LSE selected as peripheral clock"] - pub const LSE: Self = Self(0x03); - #[doc = "LSI selected as peripheral clock"] - pub const LSI: Self = Self(0x04); - #[doc = "PER selected as peripheral clock"] - pub const PER: Self = Self(0x05); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Cmdr(pub u32); + impl Cmdr { + #[doc = "Command index. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). The command index is sent to the card as part of a command message."] + pub const fn cmdindex(&self) -> u8 { + let val = (self.0 >> 0usize) & 0x3f; + val as u8 + } + #[doc = "Command index. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). The command index is sent to the card as part of a command message."] + pub fn set_cmdindex(&mut self, val: u8) { + self.0 = (self.0 & !(0x3f << 0usize)) | (((val as u32) & 0x3f) << 0usize); + } + #[doc = "The CPSM treats the command as a data transfer command, stops the interrupt period, and signals DataEnable to the DPSM This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). If this bit is set, the CPSM issues an end of interrupt period and issues DataEnable signal to the DPSM when the command is sent."] + pub const fn cmdtrans(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 + } + #[doc = "The CPSM treats the command as a data transfer command, stops the interrupt period, and signals DataEnable to the DPSM This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). If this bit is set, the CPSM issues an end of interrupt period and issues DataEnable signal to the DPSM when the command is sent."] + pub fn set_cmdtrans(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + } + #[doc = "The CPSM treats the command as a Stop Transmission command and signals Abort to the DPSM. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). If this bit is set, the CPSM issues the Abort signal to the DPSM when the command is sent."] + pub const fn cmdstop(&self) -> bool { + let val = (self.0 >> 7usize) & 0x01; + val != 0 + } + #[doc = "The CPSM treats the command as a Stop Transmission command and signals Abort to the DPSM. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). If this bit is set, the CPSM issues the Abort signal to the DPSM when the command is sent."] + pub fn set_cmdstop(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + } + #[doc = "Wait for response bits. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). They are used to configure whether the CPSM is to wait for a response, and if yes, which kind of response."] + pub const fn waitresp(&self) -> u8 { + let val = (self.0 >> 8usize) & 0x03; + val as u8 + } + #[doc = "Wait for response bits. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). They are used to configure whether the CPSM is to wait for a response, and if yes, which kind of response."] + pub fn set_waitresp(&mut self, val: u8) { + self.0 = (self.0 & !(0x03 << 8usize)) | (((val as u32) & 0x03) << 8usize); + } + #[doc = "CPSM waits for interrupt request. If this bit is set, the CPSM disables command timeout and waits for an card interrupt request (Response). If this bit is cleared in the CPSM Wait state, will cause the abort of the interrupt mode."] + pub const fn waitint(&self) -> bool { + let val = (self.0 >> 10usize) & 0x01; + val != 0 + } + #[doc = "CPSM waits for interrupt request. If this bit is set, the CPSM disables command timeout and waits for an card interrupt request (Response). If this bit is cleared in the CPSM Wait state, will cause the abort of the interrupt mode."] + pub fn set_waitint(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); + } + #[doc = "CPSM Waits for end of data transfer (CmdPend internal signal) from DPSM. This bit when set, the CPSM waits for the end of data transfer trigger before it starts sending a command. WAITPEND is only taken into account when DTMODE = MMC stream data transfer, WIDBUS = 1-bit wide bus mode, DPSMACT = 1 and DTDIR = from host to card."] + pub const fn waitpend(&self) -> bool { + let val = (self.0 >> 11usize) & 0x01; + val != 0 + } + #[doc = "CPSM Waits for end of data transfer (CmdPend internal signal) from DPSM. This bit when set, the CPSM waits for the end of data transfer trigger before it starts sending a command. WAITPEND is only taken into account when DTMODE = MMC stream data transfer, WIDBUS = 1-bit wide bus mode, DPSMACT = 1 and DTDIR = from host to card."] + pub fn set_waitpend(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); + } + #[doc = "Command path state machine (CPSM) Enable bit This bit is written 1 by firmware, and cleared by hardware when the CPSM enters the Idle state. If this bit is set, the CPSM is enabled. When DTEN = 1, no command will be transfered nor boot procedure will be started. CPSMEN is cleared to 0."] + pub const fn cpsmen(&self) -> bool { + let val = (self.0 >> 12usize) & 0x01; + val != 0 + } + #[doc = "Command path state machine (CPSM) Enable bit This bit is written 1 by firmware, and cleared by hardware when the CPSM enters the Idle state. If this bit is set, the CPSM is enabled. When DTEN = 1, no command will be transfered nor boot procedure will be started. CPSMEN is cleared to 0."] + pub fn set_cpsmen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); + } + #[doc = "Hold new data block transmission and reception in the DPSM. If this bit is set, the DPSM will not move from the Wait_S state to the Send state or from the Wait_R state to the Receive state."] + pub const fn dthold(&self) -> bool { + let val = (self.0 >> 13usize) & 0x01; + val != 0 + } + #[doc = "Hold new data block transmission and reception in the DPSM. If this bit is set, the DPSM will not move from the Wait_S state to the Send state or from the Wait_R state to the Receive state."] + pub fn set_dthold(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); + } + #[doc = "Select the boot mode procedure to be used. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0)"] + pub const fn bootmode(&self) -> bool { + let val = (self.0 >> 14usize) & 0x01; + val != 0 + } + #[doc = "Select the boot mode procedure to be used. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0)"] + pub fn set_bootmode(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); + } + #[doc = "Enable boot mode procedure."] + pub const fn booten(&self) -> bool { + let val = (self.0 >> 15usize) & 0x01; + val != 0 + } + #[doc = "Enable boot mode procedure."] + pub fn set_booten(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); + } + #[doc = "The CPSM treats the command as a Suspend or Resume command and signals interrupt period start/end. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). CMDSUSPEND = 1 and CMDTRANS = 0 Suspend command, start interrupt period when response bit BS=0. CMDSUSPEND = 1 and CMDTRANS = 1 Resume command with data, end interrupt period when response bit DF=1."] + pub const fn cmdsuspend(&self) -> bool { + let val = (self.0 >> 16usize) & 0x01; + val != 0 + } + #[doc = "The CPSM treats the command as a Suspend or Resume command and signals interrupt period start/end. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). CMDSUSPEND = 1 and CMDTRANS = 0 Suspend command, start interrupt period when response bit BS=0. CMDSUSPEND = 1 and CMDTRANS = 1 Resume command with data, end interrupt period when response bit DF=1."] + pub fn set_cmdsuspend(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Dfsdm1sel(pub u8); - impl Dfsdm1sel { - #[doc = "rcc_pclk2 selected as peripheral clock"] - pub const RCC_PCLK2: Self = Self(0); - #[doc = "System clock selected as peripheral clock"] - pub const SYS: Self = Self(0x01); + impl Default for Cmdr { + fn default() -> Cmdr { + Cmdr(0) + } } + #[doc = "SDMMC IP version register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Mco2(pub u8); - impl Mco2 { - #[doc = "System clock selected for micro-controller clock output"] - pub const SYSCLK: Self = Self(0); - #[doc = "pll2_p selected for micro-controller clock output"] - pub const PLL2_P: Self = Self(0x01); - #[doc = "HSE selected for micro-controller clock output"] - pub const HSE: Self = Self(0x02); - #[doc = "pll1_p selected for micro-controller clock output"] - pub const PLL1_P: Self = Self(0x03); - #[doc = "CSI selected for micro-controller clock output"] - pub const CSI: Self = Self(0x04); - #[doc = "LSI selected for micro-controller clock output"] - pub const LSI: Self = Self(0x05); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ver(pub u32); + impl Ver { + #[doc = "IP minor revision number."] + pub const fn minrev(&self) -> u8 { + let val = (self.0 >> 0usize) & 0x0f; + val as u8 + } + #[doc = "IP minor revision number."] + pub fn set_minrev(&mut self, val: u8) { + self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize); + } + #[doc = "IP major revision number."] + pub const fn majrev(&self) -> u8 { + let val = (self.0 >> 4usize) & 0x0f; + val as u8 + } + #[doc = "IP major revision number."] + pub fn set_majrev(&mut self, val: u8) { + self.0 = (self.0 & !(0x0f << 4usize)) | (((val as u32) & 0x0f) << 4usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lsebyp(pub u8); - impl Lsebyp { - #[doc = "LSE crystal oscillator not bypassed"] - pub const NOTBYPASSED: Self = Self(0); - #[doc = "LSE crystal oscillator bypassed with external clock"] - pub const BYPASSED: Self = Self(0x01); + impl Default for Ver { + fn default() -> Ver { + Ver(0) + } } + #[doc = "SDMMC power control register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct D2ppre1(pub u8); - impl D2ppre1 { - #[doc = "rcc_hclk not divided"] - pub const DIV1: Self = Self(0); - #[doc = "rcc_hclk divided by 2"] - pub const DIV2: Self = Self(0x04); - #[doc = "rcc_hclk divided by 4"] - pub const DIV4: Self = Self(0x05); - #[doc = "rcc_hclk divided by 8"] - pub const DIV8: Self = Self(0x06); - #[doc = "rcc_hclk divided by 16"] - pub const DIV16: Self = Self(0x07); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Power(pub u32); + impl Power { + #[doc = "SDMMC state control bits. These bits can only be written when the SDMMC is not in the power-on state (PWRCTRL?11). These bits are used to define the functional state of the SDMMC signals: Any further write will be ignored, PWRCTRL value will keep 11."] + pub const fn pwrctrl(&self) -> u8 { + let val = (self.0 >> 0usize) & 0x03; + val as u8 + } + #[doc = "SDMMC state control bits. These bits can only be written when the SDMMC is not in the power-on state (PWRCTRL?11). These bits are used to define the functional state of the SDMMC signals: Any further write will be ignored, PWRCTRL value will keep 11."] + pub fn set_pwrctrl(&mut self, val: u8) { + self.0 = (self.0 & !(0x03 << 0usize)) | (((val as u32) & 0x03) << 0usize); + } + #[doc = "Voltage switch sequence start. This bit is used to start the timing critical section of the voltage switch sequence:"] + pub const fn vswitch(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; + val != 0 + } + #[doc = "Voltage switch sequence start. This bit is used to start the timing critical section of the voltage switch sequence:"] + pub fn set_vswitch(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); + } + #[doc = "Voltage switch procedure enable. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). This bit is used to stop the SDMMC_CK after the voltage switch command response:"] + pub const fn vswitchen(&self) -> bool { + let val = (self.0 >> 3usize) & 0x01; + val != 0 + } + #[doc = "Voltage switch procedure enable. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). This bit is used to stop the SDMMC_CK after the voltage switch command response:"] + pub fn set_vswitchen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); + } + #[doc = "Data and command direction signals polarity selection. This bit can only be written when the SDMMC is in the power-off state (PWRCTRL = 00)."] + pub const fn dirpol(&self) -> bool { + let val = (self.0 >> 4usize) & 0x01; + val != 0 + } + #[doc = "Data and command direction signals polarity selection. This bit can only be written when the SDMMC is in the power-off state (PWRCTRL = 00)."] + pub fn set_dirpol(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Usbsel(pub u8); - impl Usbsel { - #[doc = "Disable the kernel clock"] - pub const DISABLE: Self = Self(0); - #[doc = "pll1_q selected as peripheral clock"] - pub const PLL1_Q: Self = Self(0x01); - #[doc = "pll3_q selected as peripheral clock"] - pub const PLL3_Q: Self = Self(0x02); - #[doc = "HSI48 selected as peripheral clock"] - pub const HSI48: Self = Self(0x03); + impl Default for Power { + fn default() -> Power { + Power(0) + } } + #[doc = "The SDMMC_ICR register is a write-only register. Writing a bit with 1 clears the corresponding bit in the SDMMC_STAR status register."] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ahb1enrDma1en(pub u8); - impl Ahb1enrDma1en { - #[doc = "The selected clock is disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled"] - pub const ENABLED: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Icr(pub u32); + impl Icr { + #[doc = "CCRCFAIL flag clear bit Set by software to clear the CCRCFAIL flag."] + pub const fn ccrcfailc(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 + } + #[doc = "CCRCFAIL flag clear bit Set by software to clear the CCRCFAIL flag."] + pub fn set_ccrcfailc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + } + #[doc = "DCRCFAIL flag clear bit Set by software to clear the DCRCFAIL flag."] + pub const fn dcrcfailc(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; + val != 0 + } + #[doc = "DCRCFAIL flag clear bit Set by software to clear the DCRCFAIL flag."] + pub fn set_dcrcfailc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + } + #[doc = "CTIMEOUT flag clear bit Set by software to clear the CTIMEOUT flag."] + pub const fn ctimeoutc(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; + val != 0 + } + #[doc = "CTIMEOUT flag clear bit Set by software to clear the CTIMEOUT flag."] + pub fn set_ctimeoutc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); + } + #[doc = "DTIMEOUT flag clear bit Set by software to clear the DTIMEOUT flag."] + pub const fn dtimeoutc(&self) -> bool { + let val = (self.0 >> 3usize) & 0x01; + val != 0 + } + #[doc = "DTIMEOUT flag clear bit Set by software to clear the DTIMEOUT flag."] + pub fn set_dtimeoutc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); + } + #[doc = "TXUNDERR flag clear bit Set by software to clear TXUNDERR flag."] + pub const fn txunderrc(&self) -> bool { + let val = (self.0 >> 4usize) & 0x01; + val != 0 + } + #[doc = "TXUNDERR flag clear bit Set by software to clear TXUNDERR flag."] + pub fn set_txunderrc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); + } + #[doc = "RXOVERR flag clear bit Set by software to clear the RXOVERR flag."] + pub const fn rxoverrc(&self) -> bool { + let val = (self.0 >> 5usize) & 0x01; + val != 0 + } + #[doc = "RXOVERR flag clear bit Set by software to clear the RXOVERR flag."] + pub fn set_rxoverrc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); + } + #[doc = "CMDREND flag clear bit Set by software to clear the CMDREND flag."] + pub const fn cmdrendc(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 + } + #[doc = "CMDREND flag clear bit Set by software to clear the CMDREND flag."] + pub fn set_cmdrendc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + } + #[doc = "CMDSENT flag clear bit Set by software to clear the CMDSENT flag."] + pub const fn cmdsentc(&self) -> bool { + let val = (self.0 >> 7usize) & 0x01; + val != 0 + } + #[doc = "CMDSENT flag clear bit Set by software to clear the CMDSENT flag."] + pub fn set_cmdsentc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + } + #[doc = "DATAEND flag clear bit Set by software to clear the DATAEND flag."] + pub const fn dataendc(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 + } + #[doc = "DATAEND flag clear bit Set by software to clear the DATAEND flag."] + pub fn set_dataendc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + } + #[doc = "DHOLD flag clear bit Set by software to clear the DHOLD flag."] + pub const fn dholdc(&self) -> bool { + let val = (self.0 >> 9usize) & 0x01; + val != 0 + } + #[doc = "DHOLD flag clear bit Set by software to clear the DHOLD flag."] + pub fn set_dholdc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + } + #[doc = "DBCKEND flag clear bit Set by software to clear the DBCKEND flag."] + pub const fn dbckendc(&self) -> bool { + let val = (self.0 >> 10usize) & 0x01; + val != 0 + } + #[doc = "DBCKEND flag clear bit Set by software to clear the DBCKEND flag."] + pub fn set_dbckendc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); + } + #[doc = "DABORT flag clear bit Set by software to clear the DABORT flag."] + pub const fn dabortc(&self) -> bool { + let val = (self.0 >> 11usize) & 0x01; + val != 0 + } + #[doc = "DABORT flag clear bit Set by software to clear the DABORT flag."] + pub fn set_dabortc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); + } + #[doc = "BUSYD0END flag clear bit Set by software to clear the BUSYD0END flag."] + pub const fn busyd0endc(&self) -> bool { + let val = (self.0 >> 21usize) & 0x01; + val != 0 + } + #[doc = "BUSYD0END flag clear bit Set by software to clear the BUSYD0END flag."] + pub fn set_busyd0endc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); + } + #[doc = "SDIOIT flag clear bit Set by software to clear the SDIOIT flag."] + pub const fn sdioitc(&self) -> bool { + let val = (self.0 >> 22usize) & 0x01; + val != 0 + } + #[doc = "SDIOIT flag clear bit Set by software to clear the SDIOIT flag."] + pub fn set_sdioitc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); + } + #[doc = "ACKFAIL flag clear bit Set by software to clear the ACKFAIL flag."] + pub const fn ackfailc(&self) -> bool { + let val = (self.0 >> 23usize) & 0x01; + val != 0 + } + #[doc = "ACKFAIL flag clear bit Set by software to clear the ACKFAIL flag."] + pub fn set_ackfailc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize); + } + #[doc = "ACKTIMEOUT flag clear bit Set by software to clear the ACKTIMEOUT flag."] + pub const fn acktimeoutc(&self) -> bool { + let val = (self.0 >> 24usize) & 0x01; + val != 0 + } + #[doc = "ACKTIMEOUT flag clear bit Set by software to clear the ACKTIMEOUT flag."] + pub fn set_acktimeoutc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize); + } + #[doc = "VSWEND flag clear bit Set by software to clear the VSWEND flag."] + pub const fn vswendc(&self) -> bool { + let val = (self.0 >> 25usize) & 0x01; + val != 0 + } + #[doc = "VSWEND flag clear bit Set by software to clear the VSWEND flag."] + pub fn set_vswendc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize); + } + #[doc = "CKSTOP flag clear bit Set by software to clear the CKSTOP flag."] + pub const fn ckstopc(&self) -> bool { + let val = (self.0 >> 26usize) & 0x01; + val != 0 + } + #[doc = "CKSTOP flag clear bit Set by software to clear the CKSTOP flag."] + pub fn set_ckstopc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); + } + #[doc = "IDMA transfer error clear bit Set by software to clear the IDMATE flag."] + pub const fn idmatec(&self) -> bool { + let val = (self.0 >> 27usize) & 0x01; + val != 0 + } + #[doc = "IDMA transfer error clear bit Set by software to clear the IDMATE flag."] + pub fn set_idmatec(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize); + } + #[doc = "IDMA buffer transfer complete clear bit Set by software to clear the IDMABTC flag."] + pub const fn idmabtcc(&self) -> bool { + let val = (self.0 >> 28usize) & 0x01; + val != 0 + } + #[doc = "IDMA buffer transfer complete clear bit Set by software to clear the IDMABTC flag."] + pub fn set_idmabtcc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ahb2lpenrDcmilpen(pub u8); - impl Ahb2lpenrDcmilpen { - #[doc = "The selected clock is disabled during csleep mode"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled during csleep mode"] - pub const ENABLED: Self = Self(0x01); + impl Default for Icr { + fn default() -> Icr { + Icr(0) + } } + #[doc = "The SDMMC_DCNTR register loads the value from the data length register (see SDMMC_DLENR) when the DPSM moves from the Idle state to the Wait_R or Wait_S state. As data is transferred, the counter decrements the value until it reaches 0. The DPSM then moves to the Idle state and when there has been no error, the data status end flag (DATAEND) is set."] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Spi45sel(pub u8); - impl Spi45sel { - #[doc = "APB clock selected as peripheral clock"] - pub const APB: Self = Self(0); - #[doc = "pll2_q selected as peripheral clock"] - pub const PLL2_Q: Self = Self(0x01); - #[doc = "pll3_q selected as peripheral clock"] - pub const PLL3_Q: Self = Self(0x02); - #[doc = "hsi_ker selected as peripheral clock"] - pub const HSI_KER: Self = Self(0x03); - #[doc = "csi_ker selected as peripheral clock"] - pub const CSI_KER: Self = Self(0x04); - #[doc = "HSE selected as peripheral clock"] - pub const HSE: Self = Self(0x05); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Dcntr(pub u32); + impl Dcntr { + #[doc = "Data count value When read, the number of remaining data bytes to be transferred is returned. Write has no effect."] + pub const fn datacount(&self) -> u32 { + let val = (self.0 >> 0usize) & 0x01ff_ffff; + val as u32 + } + #[doc = "Data count value When read, the number of remaining data bytes to be transferred is returned. Write has no effect."] + pub fn set_datacount(&mut self, val: u32) { + self.0 = + (self.0 & !(0x01ff_ffff << 0usize)) | (((val as u32) & 0x01ff_ffff) << 0usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Stopwuck(pub u8); - impl Stopwuck { - #[doc = "HSI selected as wake up clock from system Stop"] - pub const HSI: Self = Self(0); - #[doc = "CSI selected as wake up clock from system Stop"] - pub const CSI: Self = Self(0x01); + impl Default for Dcntr { + fn default() -> Dcntr { + Dcntr(0) + } } + #[doc = "The SDMMC_CLKCR register controls the SDMMC_CK output clock, the SDMMC_RX_CLK receive clock, and the bus width."] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct I2c4sel(pub u8); - impl I2c4sel { - #[doc = "rcc_pclk4 selected as peripheral clock"] - pub const RCC_PCLK4: Self = Self(0); - #[doc = "pll3_r selected as peripheral clock"] - pub const PLL3_R: Self = Self(0x01); - #[doc = "hsi_ker selected as peripheral clock"] - pub const HSI_KER: Self = Self(0x02); - #[doc = "csi_ker selected as peripheral clock"] - pub const CSI_KER: Self = Self(0x03); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Usart16sel(pub u8); - impl Usart16sel { - #[doc = "rcc_pclk2 selected as peripheral clock"] - pub const RCC_PCLK2: Self = Self(0); - #[doc = "pll2_q selected as peripheral clock"] - pub const PLL2_Q: Self = Self(0x01); - #[doc = "pll3_q selected as peripheral clock"] - pub const PLL3_Q: Self = Self(0x02); - #[doc = "hsi_ker selected as peripheral clock"] - pub const HSI_KER: Self = Self(0x03); - #[doc = "csi_ker selected as peripheral clock"] - pub const CSI_KER: Self = Self(0x04); - #[doc = "LSE selected as peripheral clock"] - pub const LSE: Self = Self(0x05); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Sai4asel(pub u8); - impl Sai4asel { - #[doc = "pll1_q selected as peripheral clock"] - pub const PLL1_Q: Self = Self(0); - #[doc = "pll2_p selected as peripheral clock"] - pub const PLL2_P: Self = Self(0x01); - #[doc = "pll3_p selected as peripheral clock"] - pub const PLL3_P: Self = Self(0x02); - #[doc = "i2s_ckin selected as peripheral clock"] - pub const I2S_CKIN: Self = Self(0x03); - #[doc = "PER selected as peripheral clock"] - pub const PER: Self = Self(0x04); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Swsr(pub u8); - impl Swsr { - #[doc = "HSI oscillator used as system clock"] - pub const HSI: Self = Self(0); - #[doc = "CSI oscillator used as system clock"] - pub const CSI: Self = Self(0x01); - #[doc = "HSE oscillator used as system clock"] - pub const HSE: Self = Self(0x02); - #[doc = "PLL1 used as system clock"] - pub const PLL1: Self = Self(0x03); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Apb1llpenrTim2lpen(pub u8); - impl Apb1llpenrTim2lpen { - #[doc = "The selected clock is disabled during csleep mode"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled during csleep mode"] - pub const ENABLED: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct C1Ahb4enrGpioaen(pub u8); - impl C1Ahb4enrGpioaen { - #[doc = "The selected clock is disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled"] - pub const ENABLED: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct C1RsrRmvf(pub u8); - impl C1RsrRmvf { - #[doc = "Not clearing the the reset flags"] - pub const NOTACTIVE: Self = Self(0); - #[doc = "Clear the reset flags"] - pub const CLEAR: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct C1Ahb1enrDma1en(pub u8); - impl C1Ahb1enrDma1en { - #[doc = "The selected clock is disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled"] - pub const ENABLED: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct C1Ahb2enrDcmien(pub u8); - impl C1Ahb2enrDcmien { - #[doc = "The selected clock is disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled"] - pub const ENABLED: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Rtcen(pub u8); - impl Rtcen { - #[doc = "RTC clock disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "RTC clock enabled"] - pub const ENABLED: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Adcsel(pub u8); - impl Adcsel { - #[doc = "pll2_p selected as peripheral clock"] - pub const PLL2_P: Self = Self(0); - #[doc = "pll3_r selected as peripheral clock"] - pub const PLL3_R: Self = Self(0x01); - #[doc = "PER selected as peripheral clock"] - pub const PER: Self = Self(0x02); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Bdmaamen(pub u8); - impl Bdmaamen { - #[doc = "Clock disabled in autonomous mode"] - pub const DISABLED: Self = Self(0); - #[doc = "Clock enabled in autonomous mode"] - pub const ENABLED: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Apb1lenrTim2en(pub u8); - impl Apb1lenrTim2en { - #[doc = "The selected clock is disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled"] - pub const ENABLED: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Clkcr(pub u32); + impl Clkcr { + #[doc = "Clock divide factor This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0). This field defines the divide factor between the input clock (SDMMCCLK) and the output clock (SDMMC_CK): SDMMC_CK frequency = SDMMCCLK / [2 * CLKDIV]. 0xx: etc.. xxx: etc.."] + pub const fn clkdiv(&self) -> u16 { + let val = (self.0 >> 0usize) & 0x03ff; + val as u16 + } + #[doc = "Clock divide factor This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0). This field defines the divide factor between the input clock (SDMMCCLK) and the output clock (SDMMC_CK): SDMMC_CK frequency = SDMMCCLK / [2 * CLKDIV]. 0xx: etc.. xxx: etc.."] + pub fn set_clkdiv(&mut self, val: u16) { + self.0 = (self.0 & !(0x03ff << 0usize)) | (((val as u32) & 0x03ff) << 0usize); + } + #[doc = "Power saving configuration bit This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0) For power saving, the SDMMC_CK clock output can be disabled when the bus is idle by setting PWRSAV:"] + pub const fn pwrsav(&self) -> bool { + let val = (self.0 >> 12usize) & 0x01; + val != 0 + } + #[doc = "Power saving configuration bit This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0) For power saving, the SDMMC_CK clock output can be disabled when the bus is idle by setting PWRSAV:"] + pub fn set_pwrsav(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); + } + #[doc = "Wide bus mode enable bit This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0)"] + pub const fn widbus(&self) -> u8 { + let val = (self.0 >> 14usize) & 0x03; + val as u8 + } + #[doc = "Wide bus mode enable bit This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0)"] + pub fn set_widbus(&mut self, val: u8) { + self.0 = (self.0 & !(0x03 << 14usize)) | (((val as u32) & 0x03) << 14usize); + } + #[doc = "SDMMC_CK dephasing selection bit for data and Command. This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0). When clock division = 1 (CLKDIV = 0), this bit has no effect. Data and Command change on SDMMC_CK falling edge. When clock division >1 (CLKDIV > 0) & DDR = 0: - SDMMC_CK edge occurs on SDMMCCLK rising edge. When clock division >1 (CLKDIV > 0) & DDR = 1: - Data changed on the SDMMCCLK falling edge succeeding a SDMMC_CK edge. - SDMMC_CK edge occurs on SDMMCCLK rising edge. - Data changed on the SDMMC_CK falling edge succeeding a SDMMC_CK edge. - SDMMC_CK edge occurs on SDMMCCLK rising edge."] + pub const fn negedge(&self) -> bool { + let val = (self.0 >> 16usize) & 0x01; + val != 0 + } + #[doc = "SDMMC_CK dephasing selection bit for data and Command. This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0). When clock division = 1 (CLKDIV = 0), this bit has no effect. Data and Command change on SDMMC_CK falling edge. When clock division >1 (CLKDIV > 0) & DDR = 0: - SDMMC_CK edge occurs on SDMMCCLK rising edge. When clock division >1 (CLKDIV > 0) & DDR = 1: - Data changed on the SDMMCCLK falling edge succeeding a SDMMC_CK edge. - SDMMC_CK edge occurs on SDMMCCLK rising edge. - Data changed on the SDMMC_CK falling edge succeeding a SDMMC_CK edge. - SDMMC_CK edge occurs on SDMMCCLK rising edge."] + pub fn set_negedge(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + } + #[doc = "Hardware flow control enable This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0) When Hardware flow control is enabled, the meaning of the TXFIFOE and RXFIFOF flags change, please see SDMMC status register definition in Section56.8.11."] + pub const fn hwfc_en(&self) -> bool { + let val = (self.0 >> 17usize) & 0x01; + val != 0 + } + #[doc = "Hardware flow control enable This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0) When Hardware flow control is enabled, the meaning of the TXFIFOE and RXFIFOF flags change, please see SDMMC status register definition in Section56.8.11."] + pub fn set_hwfc_en(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); + } + #[doc = "Data rate signaling selection This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0) DDR rate shall only be selected with 4-bit or 8-bit wide bus mode. (WIDBUS > 00). DDR = 1 has no effect when WIDBUS = 00 (1-bit wide bus). DDR rate shall only be selected with clock division >1. (CLKDIV > 0)"] + pub const fn ddr(&self) -> bool { + let val = (self.0 >> 18usize) & 0x01; + val != 0 + } + #[doc = "Data rate signaling selection This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0) DDR rate shall only be selected with 4-bit or 8-bit wide bus mode. (WIDBUS > 00). DDR = 1 has no effect when WIDBUS = 00 (1-bit wide bus). DDR rate shall only be selected with clock division >1. (CLKDIV > 0)"] + pub fn set_ddr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize); + } + #[doc = "Bus speed mode selection between DS, HS, SDR12, SDR25 and SDR50, DDR50, SDR104. This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0)"] + pub const fn busspeed(&self) -> bool { + let val = (self.0 >> 19usize) & 0x01; + val != 0 + } + #[doc = "Bus speed mode selection between DS, HS, SDR12, SDR25 and SDR50, DDR50, SDR104. This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0)"] + pub fn set_busspeed(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize); + } + #[doc = "Receive clock selection. These bits can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0)"] + pub const fn selclkrx(&self) -> u8 { + let val = (self.0 >> 20usize) & 0x03; + val as u8 + } + #[doc = "Receive clock selection. These bits can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0)"] + pub fn set_selclkrx(&mut self, val: u8) { + self.0 = (self.0 & !(0x03 << 20usize)) | (((val as u32) & 0x03) << 20usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Apb1hlpenrCrslpen(pub u8); - impl Apb1hlpenrCrslpen { - #[doc = "The selected clock is disabled during csleep mode"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled during csleep mode"] - pub const ENABLED: Self = Self(0x01); + impl Default for Clkcr { + fn default() -> Clkcr { + Clkcr(0) + } } + #[doc = "The SDMMC_RESP1/2/3/4R registers contain the status of a card, which is part of the received response."] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lsirdyie(pub u8); - impl Lsirdyie { - #[doc = "Interrupt disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "Interrupt enabled"] - pub const ENABLED: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Resp2r(pub u32); + impl Resp2r { + #[doc = "see Table404."] + pub const fn cardstatus2(&self) -> u32 { + let val = (self.0 >> 0usize) & 0xffff_ffff; + val as u32 + } + #[doc = "see Table404."] + pub fn set_cardstatus2(&mut self, val: u32) { + self.0 = + (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Rngsel(pub u8); - impl Rngsel { - #[doc = "HSI48 selected as peripheral clock"] - pub const HSI48: Self = Self(0); - #[doc = "pll1_q selected as peripheral clock"] - pub const PLL1_Q: Self = Self(0x01); - #[doc = "LSE selected as peripheral clock"] - pub const LSE: Self = Self(0x02); - #[doc = "LSI selected as peripheral clock"] - pub const LSI: Self = Self(0x03); + impl Default for Resp2r { + fn default() -> Resp2r { + Resp2r(0) + } } + #[doc = "The SDMMC_STAR register is a read-only register. It contains two types of flag:Static flags (bits [29,21,11:0]): these bits remain asserted until they are cleared by writing to the SDMMC interrupt Clear register (see SDMMC_ICR)Dynamic flags (bits [20:12]): these bits change state depending on the state of the underlying logic (for example, FIFO full and empty flags are asserted and de-asserted as data while written to the FIFO)"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ahb2enrDcmien(pub u8); - impl Ahb2enrDcmien { - #[doc = "The selected clock is disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled"] - pub const ENABLED: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Star(pub u32); + impl Star { + #[doc = "Command response received (CRC check failed). Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub const fn ccrcfail(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 + } + #[doc = "Command response received (CRC check failed). Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub fn set_ccrcfail(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + } + #[doc = "Data block sent/received (CRC check failed). Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub const fn dcrcfail(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; + val != 0 + } + #[doc = "Data block sent/received (CRC check failed). Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub fn set_dcrcfail(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + } + #[doc = "Command response timeout. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR. The Command Timeout period has a fixed value of 64 SDMMC_CK clock periods."] + pub const fn ctimeout(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; + val != 0 + } + #[doc = "Command response timeout. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR. The Command Timeout period has a fixed value of 64 SDMMC_CK clock periods."] + pub fn set_ctimeout(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); + } + #[doc = "Data timeout. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub const fn dtimeout(&self) -> bool { + let val = (self.0 >> 3usize) & 0x01; + val != 0 + } + #[doc = "Data timeout. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub fn set_dtimeout(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); + } + #[doc = "Transmit FIFO underrun error or IDMA read transfer error. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub const fn txunderr(&self) -> bool { + let val = (self.0 >> 4usize) & 0x01; + val != 0 + } + #[doc = "Transmit FIFO underrun error or IDMA read transfer error. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub fn set_txunderr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); + } + #[doc = "Received FIFO overrun error or IDMA write transfer error. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub const fn rxoverr(&self) -> bool { + let val = (self.0 >> 5usize) & 0x01; + val != 0 + } + #[doc = "Received FIFO overrun error or IDMA write transfer error. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub fn set_rxoverr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); + } + #[doc = "Command response received (CRC check passed, or no CRC). Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub const fn cmdrend(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 + } + #[doc = "Command response received (CRC check passed, or no CRC). Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub fn set_cmdrend(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + } + #[doc = "Command sent (no response required). Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub const fn cmdsent(&self) -> bool { + let val = (self.0 >> 7usize) & 0x01; + val != 0 + } + #[doc = "Command sent (no response required). Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub fn set_cmdsent(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + } + #[doc = "Data transfer ended correctly. (data counter, DATACOUNT is zero and no errors occur). Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub const fn dataend(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 + } + #[doc = "Data transfer ended correctly. (data counter, DATACOUNT is zero and no errors occur). Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub fn set_dataend(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + } + #[doc = "Data transfer Hold. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub const fn dhold(&self) -> bool { + let val = (self.0 >> 9usize) & 0x01; + val != 0 + } + #[doc = "Data transfer Hold. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub fn set_dhold(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + } + #[doc = "Data block sent/received. (CRC check passed) and DPSM moves to the READWAIT state. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub const fn dbckend(&self) -> bool { + let val = (self.0 >> 10usize) & 0x01; + val != 0 + } + #[doc = "Data block sent/received. (CRC check passed) and DPSM moves to the READWAIT state. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub fn set_dbckend(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); + } + #[doc = "Data transfer aborted by CMD12. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub const fn dabort(&self) -> bool { + let val = (self.0 >> 11usize) & 0x01; + val != 0 + } + #[doc = "Data transfer aborted by CMD12. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub fn set_dabort(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); + } + #[doc = "Data path state machine active, i.e. not in Idle state. This is a hardware status flag only, does not generate an interrupt."] + pub const fn dpsmact(&self) -> bool { + let val = (self.0 >> 12usize) & 0x01; + val != 0 + } + #[doc = "Data path state machine active, i.e. not in Idle state. This is a hardware status flag only, does not generate an interrupt."] + pub fn set_dpsmact(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); + } + #[doc = "Command path state machine active, i.e. not in Idle state. This is a hardware status flag only, does not generate an interrupt."] + pub const fn cpsmact(&self) -> bool { + let val = (self.0 >> 13usize) & 0x01; + val != 0 + } + #[doc = "Command path state machine active, i.e. not in Idle state. This is a hardware status flag only, does not generate an interrupt."] + pub fn set_cpsmact(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); + } + #[doc = "Transmit FIFO half empty At least half the number of words can be written into the FIFO. This bit is cleared when the FIFO becomes half+1 full."] + pub const fn txfifohe(&self) -> bool { + let val = (self.0 >> 14usize) & 0x01; + val != 0 + } + #[doc = "Transmit FIFO half empty At least half the number of words can be written into the FIFO. This bit is cleared when the FIFO becomes half+1 full."] + pub fn set_txfifohe(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); + } + #[doc = "Receive FIFO half full There are at least half the number of words in the FIFO. This bit is cleared when the FIFO becomes half+1 empty."] + pub const fn rxfifohf(&self) -> bool { + let val = (self.0 >> 15usize) & 0x01; + val != 0 + } + #[doc = "Receive FIFO half full There are at least half the number of words in the FIFO. This bit is cleared when the FIFO becomes half+1 empty."] + pub fn set_rxfifohf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); + } + #[doc = "Transmit FIFO full This is a hardware status flag only, does not generate an interrupt. This bit is cleared when one FIFO location becomes empty."] + pub const fn txfifof(&self) -> bool { + let val = (self.0 >> 16usize) & 0x01; + val != 0 + } + #[doc = "Transmit FIFO full This is a hardware status flag only, does not generate an interrupt. This bit is cleared when one FIFO location becomes empty."] + pub fn set_txfifof(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + } + #[doc = "Receive FIFO full This bit is cleared when one FIFO location becomes empty."] + pub const fn rxfifof(&self) -> bool { + let val = (self.0 >> 17usize) & 0x01; + val != 0 + } + #[doc = "Receive FIFO full This bit is cleared when one FIFO location becomes empty."] + pub fn set_rxfifof(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); + } + #[doc = "Transmit FIFO empty This bit is cleared when one FIFO location becomes full."] + pub const fn txfifoe(&self) -> bool { + let val = (self.0 >> 18usize) & 0x01; + val != 0 + } + #[doc = "Transmit FIFO empty This bit is cleared when one FIFO location becomes full."] + pub fn set_txfifoe(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize); + } + #[doc = "Receive FIFO empty This is a hardware status flag only, does not generate an interrupt. This bit is cleared when one FIFO location becomes full."] + pub const fn rxfifoe(&self) -> bool { + let val = (self.0 >> 19usize) & 0x01; + val != 0 + } + #[doc = "Receive FIFO empty This is a hardware status flag only, does not generate an interrupt. This bit is cleared when one FIFO location becomes full."] + pub fn set_rxfifoe(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize); + } + #[doc = "Inverted value of SDMMC_D0 line (Busy), sampled at the end of a CMD response and a second time 2 SDMMC_CK cycles after the CMD response. This bit is reset to not busy when the SDMMCD0 line changes from busy to not busy. This bit does not signal busy due to data transfer. This is a hardware status flag only, it does not generate an interrupt."] + pub const fn busyd0(&self) -> bool { + let val = (self.0 >> 20usize) & 0x01; + val != 0 + } + #[doc = "Inverted value of SDMMC_D0 line (Busy), sampled at the end of a CMD response and a second time 2 SDMMC_CK cycles after the CMD response. This bit is reset to not busy when the SDMMCD0 line changes from busy to not busy. This bit does not signal busy due to data transfer. This is a hardware status flag only, it does not generate an interrupt."] + pub fn set_busyd0(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize); + } + #[doc = "end of SDMMC_D0 Busy following a CMD response detected. This indicates only end of busy following a CMD response. This bit does not signal busy due to data transfer. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub const fn busyd0end(&self) -> bool { + let val = (self.0 >> 21usize) & 0x01; + val != 0 + } + #[doc = "end of SDMMC_D0 Busy following a CMD response detected. This indicates only end of busy following a CMD response. This bit does not signal busy due to data transfer. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub fn set_busyd0end(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); + } + #[doc = "SDIO interrupt received. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub const fn sdioit(&self) -> bool { + let val = (self.0 >> 22usize) & 0x01; + val != 0 + } + #[doc = "SDIO interrupt received. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub fn set_sdioit(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); + } + #[doc = "Boot acknowledgment received (boot acknowledgment check fail). Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub const fn ackfail(&self) -> bool { + let val = (self.0 >> 23usize) & 0x01; + val != 0 + } + #[doc = "Boot acknowledgment received (boot acknowledgment check fail). Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub fn set_ackfail(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize); + } + #[doc = "Boot acknowledgment timeout. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub const fn acktimeout(&self) -> bool { + let val = (self.0 >> 24usize) & 0x01; + val != 0 + } + #[doc = "Boot acknowledgment timeout. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub fn set_acktimeout(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize); + } + #[doc = "Voltage switch critical timing section completion. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub const fn vswend(&self) -> bool { + let val = (self.0 >> 25usize) & 0x01; + val != 0 + } + #[doc = "Voltage switch critical timing section completion. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub fn set_vswend(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize); + } + #[doc = "SDMMC_CK stopped in Voltage switch procedure. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub const fn ckstop(&self) -> bool { + let val = (self.0 >> 26usize) & 0x01; + val != 0 + } + #[doc = "SDMMC_CK stopped in Voltage switch procedure. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub fn set_ckstop(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); + } + #[doc = "IDMA transfer error. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub const fn idmate(&self) -> bool { + let val = (self.0 >> 27usize) & 0x01; + val != 0 + } + #[doc = "IDMA transfer error. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub fn set_idmate(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize); + } + #[doc = "IDMA buffer transfer complete. interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub const fn idmabtc(&self) -> bool { + let val = (self.0 >> 28usize) & 0x01; + val != 0 + } + #[doc = "IDMA buffer transfer complete. interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] + pub fn set_idmabtc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize); + } + } + impl Default for Star { + fn default() -> Star { + Star(0) + } + } + #[doc = "The SDMMC_IDMABASE0R register contains the memory buffer base address in single buffer configuration and the buffer 0 base address in double buffer configuration."] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Idmabase0r(pub u32); + impl Idmabase0r { + #[doc = "Buffer 0 memory base address bits [31:2], shall be word aligned (bit [1:0] +are always 0 and read only). This register can be written by firmware when DPSM is inactive (DPSMACT = 0), and can dynamically be written by firmware when DPSM active (DPSMACT = 1) and memory buffer 0 is inactive (IDMABACT = 1)."] + pub const fn idmabase0(&self) -> u32 { + let val = (self.0 >> 0usize) & 0xffff_ffff; + val as u32 + } + #[doc = "Buffer 0 memory base address bits [31:2], shall be word aligned (bit [1:0] +are always 0 and read only). This register can be written by firmware when DPSM is inactive (DPSMACT = 0), and can dynamically be written by firmware when DPSM active (DPSMACT = 1) and memory buffer 0 is inactive (IDMABACT = 1)."] + pub fn set_idmabase0(&mut self, val: u32) { + self.0 = + (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + } + } + impl Default for Idmabase0r { + fn default() -> Idmabase0r { + Idmabase0r(0) + } + } + #[doc = "The SDMMC_RESP1/2/3/4R registers contain the status of a card, which is part of the received response."] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Resp4r(pub u32); + impl Resp4r { + #[doc = "see Table404."] + pub const fn cardstatus4(&self) -> u32 { + let val = (self.0 >> 0usize) & 0xffff_ffff; + val as u32 + } + #[doc = "see Table404."] + pub fn set_cardstatus4(&mut self, val: u32) { + self.0 = + (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + } + } + impl Default for Resp4r { + fn default() -> Resp4r { + Resp4r(0) + } + } + } +} +pub mod syscfg_h7 { + use crate::generic::*; + #[doc = "System configuration controller"] + #[derive(Copy, Clone)] + pub struct Syscfg(pub *mut u8); + unsafe impl Send for Syscfg {} + unsafe impl Sync for Syscfg {} + impl Syscfg { + #[doc = "peripheral mode configuration register"] + pub fn pmcr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(4usize)) } + } + #[doc = "external interrupt configuration register 1"] + pub fn exticr(self, n: usize) -> Reg { + assert!(n < 4usize); + unsafe { Reg::from_ptr(self.0.add(8usize + n * 4usize)) } + } + #[doc = "compensation cell control/status register"] + pub fn cccsr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(32usize)) } + } + #[doc = "SYSCFG compensation cell value register"] + pub fn ccvr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(36usize)) } + } + #[doc = "SYSCFG compensation cell code register"] + pub fn cccr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(40usize)) } + } + #[doc = "SYSCFG power control register"] + pub fn pwrcr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(44usize)) } + } + #[doc = "SYSCFG package register"] + pub fn pkgr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(292usize)) } + } + #[doc = "SYSCFG user register 0"] + pub fn ur0(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(768usize)) } + } + #[doc = "SYSCFG user register 2"] + pub fn ur2(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(776usize)) } + } + #[doc = "SYSCFG user register 3"] + pub fn ur3(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(780usize)) } + } + #[doc = "SYSCFG user register 4"] + pub fn ur4(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(784usize)) } + } + #[doc = "SYSCFG user register 5"] + pub fn ur5(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(788usize)) } + } + #[doc = "SYSCFG user register 6"] + pub fn ur6(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(792usize)) } + } + #[doc = "SYSCFG user register 7"] + pub fn ur7(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(796usize)) } + } + #[doc = "SYSCFG user register 8"] + pub fn ur8(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(800usize)) } + } + #[doc = "SYSCFG user register 9"] + pub fn ur9(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(804usize)) } + } + #[doc = "SYSCFG user register 10"] + pub fn ur10(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(808usize)) } + } + #[doc = "SYSCFG user register 11"] + pub fn ur11(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(812usize)) } + } + #[doc = "SYSCFG user register 12"] + pub fn ur12(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(816usize)) } + } + #[doc = "SYSCFG user register 13"] + pub fn ur13(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(820usize)) } + } + #[doc = "SYSCFG user register 14"] + pub fn ur14(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(824usize)) } + } + #[doc = "SYSCFG user register 15"] + pub fn ur15(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(828usize)) } + } + #[doc = "SYSCFG user register 16"] + pub fn ur16(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(832usize)) } + } + #[doc = "SYSCFG user register 17"] + pub fn ur17(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(836usize)) } + } + } + pub mod regs { + use crate::generic::*; + #[doc = "SYSCFG user register 14"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ur14(pub u32); + impl Ur14 { + #[doc = "D1 Stop Reset"] + pub const fn d1stprst(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 + } + #[doc = "D1 Stop Reset"] + pub fn set_d1stprst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + } + } + impl Default for Ur14 { + fn default() -> Ur14 { + Ur14(0) + } + } + #[doc = "SYSCFG package register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Pkgr(pub u32); + impl Pkgr { + #[doc = "Package"] + pub const fn pkg(&self) -> u8 { + let val = (self.0 >> 0usize) & 0x0f; + val as u8 + } + #[doc = "Package"] + pub fn set_pkg(&mut self, val: u8) { + self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize); + } + } + impl Default for Pkgr { + fn default() -> Pkgr { + Pkgr(0) + } + } + #[doc = "SYSCFG user register 7"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ur7(pub u32); + impl Ur7 { + #[doc = "Secured area start address for bank 1"] + pub const fn sa_beg_1(&self) -> u16 { + let val = (self.0 >> 0usize) & 0x0fff; + val as u16 + } + #[doc = "Secured area start address for bank 1"] + pub fn set_sa_beg_1(&mut self, val: u16) { + self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize); + } + #[doc = "Secured area end address for bank 1"] + pub const fn sa_end_1(&self) -> u16 { + let val = (self.0 >> 16usize) & 0x0fff; + val as u16 + } + #[doc = "Secured area end address for bank 1"] + pub fn set_sa_end_1(&mut self, val: u16) { + self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize); + } + } + impl Default for Ur7 { + fn default() -> Ur7 { + Ur7(0) + } + } + #[doc = "SYSCFG user register 15"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ur15(pub u32); + impl Ur15 { + #[doc = "Freeze independent watchdog in Standby mode"] + pub const fn fziwdgstb(&self) -> bool { + let val = (self.0 >> 16usize) & 0x01; + val != 0 + } + #[doc = "Freeze independent watchdog in Standby mode"] + pub fn set_fziwdgstb(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + } + } + impl Default for Ur15 { + fn default() -> Ur15 { + Ur15(0) + } + } + #[doc = "SYSCFG user register 3"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ur3(pub u32); + impl Ur3 { + #[doc = "Boot Address 1"] + pub const fn boot_add1(&self) -> u16 { + let val = (self.0 >> 16usize) & 0xffff; + val as u16 + } + #[doc = "Boot Address 1"] + pub fn set_boot_add1(&mut self, val: u16) { + self.0 = (self.0 & !(0xffff << 16usize)) | (((val as u32) & 0xffff) << 16usize); + } + } + impl Default for Ur3 { + fn default() -> Ur3 { + Ur3(0) + } + } + #[doc = "SYSCFG user register 2"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ur2(pub u32); + impl Ur2 { + #[doc = "BOR_LVL Brownout Reset Threshold Level"] + pub const fn borh(&self) -> u8 { + let val = (self.0 >> 0usize) & 0x03; + val as u8 + } + #[doc = "BOR_LVL Brownout Reset Threshold Level"] + pub fn set_borh(&mut self, val: u8) { + self.0 = (self.0 & !(0x03 << 0usize)) | (((val as u32) & 0x03) << 0usize); + } + #[doc = "Boot Address 0"] + pub const fn boot_add0(&self) -> u16 { + let val = (self.0 >> 16usize) & 0xffff; + val as u16 + } + #[doc = "Boot Address 0"] + pub fn set_boot_add0(&mut self, val: u16) { + self.0 = (self.0 & !(0xffff << 16usize)) | (((val as u32) & 0xffff) << 16usize); + } + } + impl Default for Ur2 { + fn default() -> Ur2 { + Ur2(0) + } + } + #[doc = "SYSCFG user register 11"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ur11(pub u32); + impl Ur11 { + #[doc = "Secured area end address for bank 2"] + pub const fn sa_end_2(&self) -> u16 { + let val = (self.0 >> 0usize) & 0x0fff; + val as u16 + } + #[doc = "Secured area end address for bank 2"] + pub fn set_sa_end_2(&mut self, val: u16) { + self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize); + } + #[doc = "Independent Watchdog 1 mode"] + pub const fn iwdg1m(&self) -> bool { + let val = (self.0 >> 16usize) & 0x01; + val != 0 + } + #[doc = "Independent Watchdog 1 mode"] + pub fn set_iwdg1m(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + } + } + impl Default for Ur11 { + fn default() -> Ur11 { + Ur11(0) + } + } + #[doc = "SYSCFG compensation cell value register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ccvr(pub u32); + impl Ccvr { + #[doc = "NMOS compensation value"] + pub const fn ncv(&self) -> u8 { + let val = (self.0 >> 0usize) & 0x0f; + val as u8 + } + #[doc = "NMOS compensation value"] + pub fn set_ncv(&mut self, val: u8) { + self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize); + } + #[doc = "PMOS compensation value"] + pub const fn pcv(&self) -> u8 { + let val = (self.0 >> 4usize) & 0x0f; + val as u8 + } + #[doc = "PMOS compensation value"] + pub fn set_pcv(&mut self, val: u8) { + self.0 = (self.0 & !(0x0f << 4usize)) | (((val as u32) & 0x0f) << 4usize); + } + } + impl Default for Ccvr { + fn default() -> Ccvr { + Ccvr(0) + } + } + #[doc = "SYSCFG user register 13"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ur13(pub u32); + impl Ur13 { + #[doc = "Secured DTCM RAM Size"] + pub const fn sdrs(&self) -> u8 { + let val = (self.0 >> 0usize) & 0x03; + val as u8 + } + #[doc = "Secured DTCM RAM Size"] + pub fn set_sdrs(&mut self, val: u8) { + self.0 = (self.0 & !(0x03 << 0usize)) | (((val as u32) & 0x03) << 0usize); + } + #[doc = "D1 Standby reset"] + pub const fn d1sbrst(&self) -> bool { + let val = (self.0 >> 16usize) & 0x01; + val != 0 + } + #[doc = "D1 Standby reset"] + pub fn set_d1sbrst(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + } + } + impl Default for Ur13 { + fn default() -> Ur13 { + Ur13(0) + } + } + #[doc = "SYSCFG user register 12"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ur12(pub u32); + impl Ur12 { + #[doc = "Secure mode"] + pub const fn secure(&self) -> bool { + let val = (self.0 >> 16usize) & 0x01; + val != 0 + } + #[doc = "Secure mode"] + pub fn set_secure(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + } + } + impl Default for Ur12 { + fn default() -> Ur12 { + Ur12(0) + } + } + #[doc = "SYSCFG compensation cell code register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Cccr(pub u32); + impl Cccr { + #[doc = "NMOS compensation code"] + pub const fn ncc(&self) -> u8 { + let val = (self.0 >> 0usize) & 0x0f; + val as u8 + } + #[doc = "NMOS compensation code"] + pub fn set_ncc(&mut self, val: u8) { + self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize); + } + #[doc = "PMOS compensation code"] + pub const fn pcc(&self) -> u8 { + let val = (self.0 >> 4usize) & 0x0f; + val as u8 + } + #[doc = "PMOS compensation code"] + pub fn set_pcc(&mut self, val: u8) { + self.0 = (self.0 & !(0x0f << 4usize)) | (((val as u32) & 0x0f) << 4usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lsecsson(pub u8); - impl Lsecsson { - #[doc = "Clock security system on 32 kHz oscillator off"] - pub const SECURITYOFF: Self = Self(0); - #[doc = "Clock security system on 32 kHz oscillator on"] - pub const SECURITYON: Self = Self(0x01); + impl Default for Cccr { + fn default() -> Cccr { + Cccr(0) + } } + #[doc = "SYSCFG user register 9"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Fdcansel(pub u8); - impl Fdcansel { - #[doc = "HSE selected as peripheral clock"] - pub const HSE: Self = Self(0); - #[doc = "pll1_q selected as peripheral clock"] - pub const PLL1_Q: Self = Self(0x01); - #[doc = "pll2_q selected as peripheral clock"] - pub const PLL2_Q: Self = Self(0x02); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ur9(pub u32); + impl Ur9 { + #[doc = "Write protection for flash bank 2"] + pub const fn wrpn_2(&self) -> u8 { + let val = (self.0 >> 0usize) & 0xff; + val as u8 + } + #[doc = "Write protection for flash bank 2"] + pub fn set_wrpn_2(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize); + } + #[doc = "Protected area start address for bank 2"] + pub const fn pa_beg_2(&self) -> u16 { + let val = (self.0 >> 16usize) & 0x0fff; + val as u16 + } + #[doc = "Protected area start address for bank 2"] + pub fn set_pa_beg_2(&mut self, val: u16) { + self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lsion(pub u8); - impl Lsion { - #[doc = "LSI oscillator Off"] - pub const OFF: Self = Self(0); - #[doc = "LSI oscillator On"] - pub const ON: Self = Self(0x01); + impl Default for Ur9 { + fn default() -> Ur9 { + Ur9(0) + } } + #[doc = "SYSCFG user register 6"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct D3ppre(pub u8); - impl D3ppre { - #[doc = "rcc_hclk not divided"] - pub const DIV1: Self = Self(0); - #[doc = "rcc_hclk divided by 2"] - pub const DIV2: Self = Self(0x04); - #[doc = "rcc_hclk divided by 4"] - pub const DIV4: Self = Self(0x05); - #[doc = "rcc_hclk divided by 8"] - pub const DIV8: Self = Self(0x06); - #[doc = "rcc_hclk divided by 16"] - pub const DIV16: Self = Self(0x07); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ur6(pub u32); + impl Ur6 { + #[doc = "Protected area start address for bank 1"] + pub const fn pa_beg_1(&self) -> u16 { + let val = (self.0 >> 0usize) & 0x0fff; + val as u16 + } + #[doc = "Protected area start address for bank 1"] + pub fn set_pa_beg_1(&mut self, val: u16) { + self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize); + } + #[doc = "Protected area end address for bank 1"] + pub const fn pa_end_1(&self) -> u16 { + let val = (self.0 >> 16usize) & 0x0fff; + val as u16 + } + #[doc = "Protected area end address for bank 1"] + pub fn set_pa_end_1(&mut self, val: u16) { + self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize); + } + } + impl Default for Ur6 { + fn default() -> Ur6 { + Ur6(0) + } } + #[doc = "compensation cell control/status register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Mco1(pub u8); - impl Mco1 { - #[doc = "HSI selected for micro-controller clock output"] - pub const HSI: Self = Self(0); - #[doc = "LSE selected for micro-controller clock output"] - pub const LSE: Self = Self(0x01); - #[doc = "HSE selected for micro-controller clock output"] - pub const HSE: Self = Self(0x02); - #[doc = "pll1_q selected for micro-controller clock output"] - pub const PLL1_Q: Self = Self(0x03); - #[doc = "HSI48 selected for micro-controller clock output"] - pub const HSI48: Self = Self(0x04); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Cccsr(pub u32); + impl Cccsr { + #[doc = "enable"] + pub const fn en(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 + } + #[doc = "enable"] + pub fn set_en(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + } + #[doc = "Code selection"] + pub const fn cs(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; + val != 0 + } + #[doc = "Code selection"] + pub fn set_cs(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + } + #[doc = "Compensation cell ready flag"] + pub const fn ready(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 + } + #[doc = "Compensation cell ready flag"] + pub fn set_ready(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + } + #[doc = "High-speed at low-voltage"] + pub const fn hslv(&self) -> bool { + let val = (self.0 >> 16usize) & 0x01; + val != 0 + } + #[doc = "High-speed at low-voltage"] + pub fn set_hslv(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + } } + impl Default for Cccsr { + fn default() -> Cccsr { + Cccsr(0) + } + } + #[doc = "SYSCFG user register 16"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct C1Apb4lpenrSyscfglpen(pub u8); - impl C1Apb4lpenrSyscfglpen { - #[doc = "The selected clock is disabled during csleep mode"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled during csleep mode"] - pub const ENABLED: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ur16(pub u32); + impl Ur16 { + #[doc = "Freeze independent watchdog in Stop mode"] + pub const fn fziwdgstp(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 + } + #[doc = "Freeze independent watchdog in Stop mode"] + pub fn set_fziwdgstp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + } + #[doc = "Private key programmed"] + pub const fn pkp(&self) -> bool { + let val = (self.0 >> 16usize) & 0x01; + val != 0 + } + #[doc = "Private key programmed"] + pub fn set_pkp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + } + } + impl Default for Ur16 { + fn default() -> Ur16 { + Ur16(0) + } } + #[doc = "SYSCFG user register 5"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ahb4enrGpioaen(pub u8); - impl Ahb4enrGpioaen { - #[doc = "The selected clock is disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled"] - pub const ENABLED: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ur5(pub u32); + impl Ur5 { + #[doc = "Mass erase secured area disabled for bank 1"] + pub const fn mesad_1(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 + } + #[doc = "Mass erase secured area disabled for bank 1"] + pub fn set_mesad_1(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + } + #[doc = "Write protection for flash bank 1"] + pub const fn wrpn_1(&self) -> u8 { + let val = (self.0 >> 16usize) & 0xff; + val as u8 + } + #[doc = "Write protection for flash bank 1"] + pub fn set_wrpn_1(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 16usize)) | (((val as u32) & 0xff) << 16usize); + } + } + impl Default for Ur5 { + fn default() -> Ur5 { + Ur5(0) + } } + #[doc = "SYSCFG user register 0"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Bdrst(pub u8); - impl Bdrst { - #[doc = "Resets the entire VSW domain"] - pub const RESET: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ur0(pub u32); + impl Ur0 { + #[doc = "Bank Swap"] + pub const fn bks(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 + } + #[doc = "Bank Swap"] + pub fn set_bks(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + } + #[doc = "Readout protection"] + pub const fn rdp(&self) -> u8 { + let val = (self.0 >> 16usize) & 0xff; + val as u8 + } + #[doc = "Readout protection"] + pub fn set_rdp(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 16usize)) | (((val as u32) & 0xff) << 16usize); + } + } + impl Default for Ur0 { + fn default() -> Ur0 { + Ur0(0) + } } + #[doc = "SYSCFG user register 17"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Hsion(pub u8); - impl Hsion { - #[doc = "Clock Off"] - pub const OFF: Self = Self(0); - #[doc = "Clock On"] - pub const ON: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ur17(pub u32); + impl Ur17 { + #[doc = "I/O high speed / low voltage"] + pub const fn io_hslv(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 + } + #[doc = "I/O high speed / low voltage"] + pub fn set_io_hslv(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + } + } + impl Default for Ur17 { + fn default() -> Ur17 { + Ur17(0) + } } + #[doc = "peripheral mode configuration register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Divp1(pub u8); - impl Divp1 { - #[doc = "pll_p_ck = vco_ck"] - pub const DIV1: Self = Self(0); - #[doc = "pll_p_ck = vco_ck / 2"] - pub const DIV2: Self = Self(0x01); - #[doc = "pll_p_ck = vco_ck / 4"] - pub const DIV4: Self = Self(0x03); - #[doc = "pll_p_ck = vco_ck / 6"] - pub const DIV6: Self = Self(0x05); - #[doc = "pll_p_ck = vco_ck / 8"] - pub const DIV8: Self = Self(0x07); - #[doc = "pll_p_ck = vco_ck / 10"] - pub const DIV10: Self = Self(0x09); - #[doc = "pll_p_ck = vco_ck / 12"] - pub const DIV12: Self = Self(0x0b); - #[doc = "pll_p_ck = vco_ck / 14"] - pub const DIV14: Self = Self(0x0d); - #[doc = "pll_p_ck = vco_ck / 16"] - pub const DIV16: Self = Self(0x0f); - #[doc = "pll_p_ck = vco_ck / 18"] - pub const DIV18: Self = Self(0x11); - #[doc = "pll_p_ck = vco_ck / 20"] - pub const DIV20: Self = Self(0x13); - #[doc = "pll_p_ck = vco_ck / 22"] - pub const DIV22: Self = Self(0x15); - #[doc = "pll_p_ck = vco_ck / 24"] - pub const DIV24: Self = Self(0x17); - #[doc = "pll_p_ck = vco_ck / 26"] - pub const DIV26: Self = Self(0x19); - #[doc = "pll_p_ck = vco_ck / 28"] - pub const DIV28: Self = Self(0x1b); - #[doc = "pll_p_ck = vco_ck / 30"] - pub const DIV30: Self = Self(0x1d); - #[doc = "pll_p_ck = vco_ck / 32"] - pub const DIV32: Self = Self(0x1f); - #[doc = "pll_p_ck = vco_ck / 34"] - pub const DIV34: Self = Self(0x21); - #[doc = "pll_p_ck = vco_ck / 36"] - pub const DIV36: Self = Self(0x23); - #[doc = "pll_p_ck = vco_ck / 38"] - pub const DIV38: Self = Self(0x25); - #[doc = "pll_p_ck = vco_ck / 40"] - pub const DIV40: Self = Self(0x27); - #[doc = "pll_p_ck = vco_ck / 42"] - pub const DIV42: Self = Self(0x29); - #[doc = "pll_p_ck = vco_ck / 44"] - pub const DIV44: Self = Self(0x2b); - #[doc = "pll_p_ck = vco_ck / 46"] - pub const DIV46: Self = Self(0x2d); - #[doc = "pll_p_ck = vco_ck / 48"] - pub const DIV48: Self = Self(0x2f); - #[doc = "pll_p_ck = vco_ck / 50"] - pub const DIV50: Self = Self(0x31); - #[doc = "pll_p_ck = vco_ck / 52"] - pub const DIV52: Self = Self(0x33); - #[doc = "pll_p_ck = vco_ck / 54"] - pub const DIV54: Self = Self(0x35); - #[doc = "pll_p_ck = vco_ck / 56"] - pub const DIV56: Self = Self(0x37); - #[doc = "pll_p_ck = vco_ck / 58"] - pub const DIV58: Self = Self(0x39); - #[doc = "pll_p_ck = vco_ck / 60"] - pub const DIV60: Self = Self(0x3b); - #[doc = "pll_p_ck = vco_ck / 62"] - pub const DIV62: Self = Self(0x3d); - #[doc = "pll_p_ck = vco_ck / 64"] - pub const DIV64: Self = Self(0x3f); - #[doc = "pll_p_ck = vco_ck / 66"] - pub const DIV66: Self = Self(0x41); - #[doc = "pll_p_ck = vco_ck / 68"] - pub const DIV68: Self = Self(0x43); - #[doc = "pll_p_ck = vco_ck / 70"] - pub const DIV70: Self = Self(0x45); - #[doc = "pll_p_ck = vco_ck / 72"] - pub const DIV72: Self = Self(0x47); - #[doc = "pll_p_ck = vco_ck / 74"] - pub const DIV74: Self = Self(0x49); - #[doc = "pll_p_ck = vco_ck / 76"] - pub const DIV76: Self = Self(0x4b); - #[doc = "pll_p_ck = vco_ck / 78"] - pub const DIV78: Self = Self(0x4d); - #[doc = "pll_p_ck = vco_ck / 80"] - pub const DIV80: Self = Self(0x4f); - #[doc = "pll_p_ck = vco_ck / 82"] - pub const DIV82: Self = Self(0x51); - #[doc = "pll_p_ck = vco_ck / 84"] - pub const DIV84: Self = Self(0x53); - #[doc = "pll_p_ck = vco_ck / 86"] - pub const DIV86: Self = Self(0x55); - #[doc = "pll_p_ck = vco_ck / 88"] - pub const DIV88: Self = Self(0x57); - #[doc = "pll_p_ck = vco_ck / 90"] - pub const DIV90: Self = Self(0x59); - #[doc = "pll_p_ck = vco_ck / 92"] - pub const DIV92: Self = Self(0x5b); - #[doc = "pll_p_ck = vco_ck / 94"] - pub const DIV94: Self = Self(0x5d); - #[doc = "pll_p_ck = vco_ck / 96"] - pub const DIV96: Self = Self(0x5f); - #[doc = "pll_p_ck = vco_ck / 98"] - pub const DIV98: Self = Self(0x61); - #[doc = "pll_p_ck = vco_ck / 100"] - pub const DIV100: Self = Self(0x63); - #[doc = "pll_p_ck = vco_ck / 102"] - pub const DIV102: Self = Self(0x65); - #[doc = "pll_p_ck = vco_ck / 104"] - pub const DIV104: Self = Self(0x67); - #[doc = "pll_p_ck = vco_ck / 106"] - pub const DIV106: Self = Self(0x69); - #[doc = "pll_p_ck = vco_ck / 108"] - pub const DIV108: Self = Self(0x6b); - #[doc = "pll_p_ck = vco_ck / 110"] - pub const DIV110: Self = Self(0x6d); - #[doc = "pll_p_ck = vco_ck / 112"] - pub const DIV112: Self = Self(0x6f); - #[doc = "pll_p_ck = vco_ck / 114"] - pub const DIV114: Self = Self(0x71); - #[doc = "pll_p_ck = vco_ck / 116"] - pub const DIV116: Self = Self(0x73); - #[doc = "pll_p_ck = vco_ck / 118"] - pub const DIV118: Self = Self(0x75); - #[doc = "pll_p_ck = vco_ck / 120"] - pub const DIV120: Self = Self(0x77); - #[doc = "pll_p_ck = vco_ck / 122"] - pub const DIV122: Self = Self(0x79); - #[doc = "pll_p_ck = vco_ck / 124"] - pub const DIV124: Self = Self(0x7b); - #[doc = "pll_p_ck = vco_ck / 126"] - pub const DIV126: Self = Self(0x7d); - #[doc = "pll_p_ck = vco_ck / 128"] - pub const DIV128: Self = Self(0x7f); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Pmcr(pub u32); + impl Pmcr { + #[doc = "I2C1 Fm+"] + pub const fn i2c1fmp(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 + } + #[doc = "I2C1 Fm+"] + pub fn set_i2c1fmp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + } + #[doc = "I2C2 Fm+"] + pub const fn i2c2fmp(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; + val != 0 + } + #[doc = "I2C2 Fm+"] + pub fn set_i2c2fmp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + } + #[doc = "I2C3 Fm+"] + pub const fn i2c3fmp(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; + val != 0 + } + #[doc = "I2C3 Fm+"] + pub fn set_i2c3fmp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); + } + #[doc = "I2C4 Fm+"] + pub const fn i2c4fmp(&self) -> bool { + let val = (self.0 >> 3usize) & 0x01; + val != 0 + } + #[doc = "I2C4 Fm+"] + pub fn set_i2c4fmp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); + } + #[doc = "PB(6) Fm+"] + pub const fn pb6fmp(&self) -> bool { + let val = (self.0 >> 4usize) & 0x01; + val != 0 + } + #[doc = "PB(6) Fm+"] + pub fn set_pb6fmp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); + } + #[doc = "PB(7) Fast Mode Plus"] + pub const fn pb7fmp(&self) -> bool { + let val = (self.0 >> 5usize) & 0x01; + val != 0 + } + #[doc = "PB(7) Fast Mode Plus"] + pub fn set_pb7fmp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); + } + #[doc = "PB(8) Fast Mode Plus"] + pub const fn pb8fmp(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 + } + #[doc = "PB(8) Fast Mode Plus"] + pub fn set_pb8fmp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + } + #[doc = "PB(9) Fm+"] + pub const fn pb9fmp(&self) -> bool { + let val = (self.0 >> 7usize) & 0x01; + val != 0 + } + #[doc = "PB(9) Fm+"] + pub fn set_pb9fmp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + } + #[doc = "Booster Enable"] + pub const fn booste(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 + } + #[doc = "Booster Enable"] + pub fn set_booste(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + } + #[doc = "Analog switch supply voltage selection"] + pub const fn boostvddsel(&self) -> bool { + let val = (self.0 >> 9usize) & 0x01; + val != 0 + } + #[doc = "Analog switch supply voltage selection"] + pub fn set_boostvddsel(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + } + #[doc = "Ethernet PHY Interface Selection"] + pub const fn epis(&self) -> u8 { + let val = (self.0 >> 21usize) & 0x07; + val as u8 + } + #[doc = "Ethernet PHY Interface Selection"] + pub fn set_epis(&mut self, val: u8) { + self.0 = (self.0 & !(0x07 << 21usize)) | (((val as u32) & 0x07) << 21usize); + } + #[doc = "PA0 Switch Open"] + pub const fn pa0so(&self) -> bool { + let val = (self.0 >> 24usize) & 0x01; + val != 0 + } + #[doc = "PA0 Switch Open"] + pub fn set_pa0so(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize); + } + #[doc = "PA1 Switch Open"] + pub const fn pa1so(&self) -> bool { + let val = (self.0 >> 25usize) & 0x01; + val != 0 + } + #[doc = "PA1 Switch Open"] + pub fn set_pa1so(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize); + } + #[doc = "PC2 Switch Open"] + pub const fn pc2so(&self) -> bool { + let val = (self.0 >> 26usize) & 0x01; + val != 0 + } + #[doc = "PC2 Switch Open"] + pub fn set_pc2so(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); + } + #[doc = "PC3 Switch Open"] + pub const fn pc3so(&self) -> bool { + let val = (self.0 >> 27usize) & 0x01; + val != 0 + } + #[doc = "PC3 Switch Open"] + pub fn set_pc3so(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Hsirdyr(pub u8); - impl Hsirdyr { - #[doc = "Clock not ready"] - pub const NOTREADY: Self = Self(0); - #[doc = "Clock ready"] - pub const READY: Self = Self(0x01); + impl Default for Pmcr { + fn default() -> Pmcr { + Pmcr(0) + } } + #[doc = "external interrupt configuration register 2"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct C1Ahb2lpenrDcmilpen(pub u8); - impl C1Ahb2lpenrDcmilpen { - #[doc = "The selected clock is disabled during csleep mode"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled during csleep mode"] - pub const ENABLED: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Exticr(pub u32); + impl Exticr { + #[doc = "EXTI x configuration (x = 4 to 7)"] + pub fn exti(&self, n: usize) -> u8 { + assert!(n < 4usize); + let offs = 0usize + n * 4usize; + let val = (self.0 >> offs) & 0x0f; + val as u8 + } + #[doc = "EXTI x configuration (x = 4 to 7)"] + pub fn set_exti(&mut self, n: usize, val: u8) { + assert!(n < 4usize); + let offs = 0usize + n * 4usize; + self.0 = (self.0 & !(0x0f << offs)) | (((val as u32) & 0x0f) << offs); + } + } + impl Default for Exticr { + fn default() -> Exticr { + Exticr(0) + } } + #[doc = "SYSCFG user register 10"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Gpioarst(pub u8); - impl Gpioarst { - #[doc = "Reset the selected module"] - pub const RESET: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ur10(pub u32); + impl Ur10 { + #[doc = "Protected area end address for bank 2"] + pub const fn pa_end_2(&self) -> u16 { + let val = (self.0 >> 0usize) & 0x0fff; + val as u16 + } + #[doc = "Protected area end address for bank 2"] + pub fn set_pa_end_2(&mut self, val: u16) { + self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize); + } + #[doc = "Secured area start address for bank 2"] + pub const fn sa_beg_2(&self) -> u16 { + let val = (self.0 >> 16usize) & 0x0fff; + val as u16 + } + #[doc = "Secured area start address for bank 2"] + pub fn set_sa_beg_2(&mut self, val: u16) { + self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize); + } + } + impl Default for Ur10 { + fn default() -> Ur10 { + Ur10(0) + } } + #[doc = "SYSCFG user register 4"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Apb2lpenrTim1lpen(pub u8); - impl Apb2lpenrTim1lpen { - #[doc = "The selected clock is disabled during csleep mode"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled during csleep mode"] - pub const ENABLED: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ur4(pub u32); + impl Ur4 { + #[doc = "Mass Erase Protected Area Disabled for bank 1"] + pub const fn mepad_1(&self) -> bool { + let val = (self.0 >> 16usize) & 0x01; + val != 0 + } + #[doc = "Mass Erase Protected Area Disabled for bank 1"] + pub fn set_mepad_1(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + } + } + impl Default for Ur4 { + fn default() -> Ur4 { + Ur4(0) + } } + #[doc = "SYSCFG power control register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Pll1vcosel(pub u8); - impl Pll1vcosel { - #[doc = "VCO frequency range 192 to 836 MHz"] - pub const WIDEVCO: Self = Self(0); - #[doc = "VCO frequency range 150 to 420 MHz"] - pub const MEDIUMVCO: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Pwrcr(pub u32); + impl Pwrcr { + #[doc = "Overdrive enable"] + pub const fn oden(&self) -> u8 { + let val = (self.0 >> 0usize) & 0x0f; + val as u8 + } + #[doc = "Overdrive enable"] + pub fn set_oden(&mut self, val: u8) { + self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize); + } } + impl Default for Pwrcr { + fn default() -> Pwrcr { + Pwrcr(0) + } + } + #[doc = "SYSCFG user register 8"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Apb1henrCrsen(pub u8); - impl Apb1henrCrsen { - #[doc = "The selected clock is disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled"] - pub const ENABLED: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ur8(pub u32); + impl Ur8 { + #[doc = "Mass erase protected area disabled for bank 2"] + pub const fn mepad_2(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 + } + #[doc = "Mass erase protected area disabled for bank 2"] + pub fn set_mepad_2(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + } + #[doc = "Mass erase secured area disabled for bank 2"] + pub const fn mesad_2(&self) -> bool { + let val = (self.0 >> 16usize) & 0x01; + val != 0 + } + #[doc = "Mass erase secured area disabled for bank 2"] + pub fn set_mesad_2(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + } + } + impl Default for Ur8 { + fn default() -> Ur8 { + Ur8(0) + } + } + } +} +pub mod rcc_h7 { + use crate::generic::*; + #[doc = "Reset and clock control"] + #[derive(Copy, Clone)] + pub struct Rcc(pub *mut u8); + unsafe impl Send for Rcc {} + unsafe impl Sync for Rcc {} + impl Rcc { + #[doc = "clock control register"] + pub fn cr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(0usize)) } + } + #[doc = "RCC HSI configuration register"] + pub fn hsicfgr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(4usize)) } + } + #[doc = "RCC Internal Clock Source Calibration Register"] + pub fn icscr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(4usize)) } + } + #[doc = "RCC Clock Recovery RC Register"] + pub fn crrcr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(8usize)) } + } + #[doc = "RCC CSI configuration register"] + pub fn csicfgr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(12usize)) } + } + #[doc = "RCC Clock Configuration Register"] + pub fn cfgr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(16usize)) } + } + #[doc = "RCC Domain 1 Clock Configuration Register"] + pub fn d1cfgr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(24usize)) } + } + #[doc = "RCC Domain 2 Clock Configuration Register"] + pub fn d2cfgr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(28usize)) } + } + #[doc = "RCC Domain 3 Clock Configuration Register"] + pub fn d3cfgr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(32usize)) } + } + #[doc = "RCC PLLs Clock Source Selection Register"] + pub fn pllckselr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(40usize)) } + } + #[doc = "RCC PLLs Configuration Register"] + pub fn pllcfgr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(44usize)) } + } + #[doc = "RCC PLL1 Dividers Configuration Register"] + pub fn plldivr(self, n: usize) -> Reg { + assert!(n < 3usize); + unsafe { Reg::from_ptr(self.0.add(48usize + n * 8usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lptim1sel(pub u8); - impl Lptim1sel { - #[doc = "rcc_pclk1 selected as peripheral clock"] - pub const RCC_PCLK1: Self = Self(0); - #[doc = "pll2_p selected as peripheral clock"] - pub const PLL2_P: Self = Self(0x01); - #[doc = "pll3_r selected as peripheral clock"] - pub const PLL3_R: Self = Self(0x02); - #[doc = "LSE selected as peripheral clock"] - pub const LSE: Self = Self(0x03); - #[doc = "LSI selected as peripheral clock"] - pub const LSI: Self = Self(0x04); - #[doc = "PER selected as peripheral clock"] - pub const PER: Self = Self(0x05); + #[doc = "RCC PLL1 Fractional Divider Register"] + pub fn pllfracr(self, n: usize) -> Reg { + assert!(n < 3usize); + unsafe { Reg::from_ptr(self.0.add(52usize + n * 8usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct C1Apb2lpenrTim1lpen(pub u8); - impl C1Apb2lpenrTim1lpen { - #[doc = "The selected clock is disabled during csleep mode"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled during csleep mode"] - pub const ENABLED: Self = Self(0x01); + #[doc = "RCC Domain 1 Kernel Clock Configuration Register"] + pub fn d1ccipr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(76usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lpuart1sel(pub u8); - impl Lpuart1sel { - #[doc = "rcc_pclk_d3 selected as peripheral clock"] - pub const RCC_PCLK_D3: Self = Self(0); - #[doc = "pll2_q selected as peripheral clock"] - pub const PLL2_Q: Self = Self(0x01); - #[doc = "pll3_q selected as peripheral clock"] - pub const PLL3_Q: Self = Self(0x02); - #[doc = "hsi_ker selected as peripheral clock"] - pub const HSI_KER: Self = Self(0x03); - #[doc = "csi_ker selected as peripheral clock"] - pub const CSI_KER: Self = Self(0x04); - #[doc = "LSE selected as peripheral clock"] - pub const LSE: Self = Self(0x05); + #[doc = "RCC Domain 2 Kernel Clock Configuration Register"] + pub fn d2ccip1r(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(80usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct C1Apb3lpenrLtdclpen(pub u8); - impl C1Apb3lpenrLtdclpen { - #[doc = "The selected clock is disabled during csleep mode"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled during csleep mode"] - pub const ENABLED: Self = Self(0x01); + #[doc = "RCC Domain 2 Kernel Clock Configuration Register"] + pub fn d2ccip2r(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(84usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ckpersel(pub u8); - impl Ckpersel { - #[doc = "HSI selected as peripheral clock"] - pub const HSI: Self = Self(0); - #[doc = "CSI selected as peripheral clock"] - pub const CSI: Self = Self(0x01); - #[doc = "HSE selected as peripheral clock"] - pub const HSE: Self = Self(0x02); + #[doc = "RCC Domain 3 Kernel Clock Configuration Register"] + pub fn d3ccipr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(88usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Hsidivfr(pub u8); - impl Hsidivfr { - #[doc = "New HSIDIV ratio has not yet propagated to hsi_ck"] - pub const NOTPROPAGATED: Self = Self(0); - #[doc = "HSIDIV ratio has propagated to hsi_ck"] - pub const PROPAGATED: Self = Self(0x01); + #[doc = "RCC Clock Source Interrupt Enable Register"] + pub fn cier(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(96usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ltdcrst(pub u8); - impl Ltdcrst { - #[doc = "Reset the selected module"] - pub const RESET: Self = Self(0x01); + #[doc = "RCC Clock Source Interrupt Flag Register"] + pub fn cifr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(100usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Cecsel(pub u8); - impl Cecsel { - #[doc = "LSE selected as peripheral clock"] - pub const LSE: Self = Self(0); - #[doc = "LSI selected as peripheral clock"] - pub const LSI: Self = Self(0x01); - #[doc = "csi_ker selected as peripheral clock"] - pub const CSI_KER: Self = Self(0x02); + #[doc = "RCC Clock Source Interrupt Clear Register"] + pub fn cicr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(104usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct C1Apb1hlpenrCrslpen(pub u8); - impl C1Apb1hlpenrCrslpen { - #[doc = "The selected clock is disabled during csleep mode"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled during csleep mode"] - pub const ENABLED: Self = Self(0x01); + #[doc = "RCC Backup Domain Control Register"] + pub fn bdcr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(112usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Hsidiv(pub u8); - impl Hsidiv { - #[doc = "No division"] - pub const DIV1: Self = Self(0); - #[doc = "Division by 2"] - pub const DIV2: Self = Self(0x01); - #[doc = "Division by 4"] - pub const DIV4: Self = Self(0x02); - #[doc = "Division by 8"] - pub const DIV8: Self = Self(0x03); + #[doc = "RCC Clock Control and Status Register"] + pub fn csr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(116usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Swpsel(pub u8); - impl Swpsel { - #[doc = "pclk selected as peripheral clock"] - pub const PCLK: Self = Self(0); - #[doc = "hsi_ker selected as peripheral clock"] - pub const HSI_KER: Self = Self(0x01); + #[doc = "RCC AHB3 Reset Register"] + pub fn ahb3rstr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(124usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Mdmarst(pub u8); - impl Mdmarst { - #[doc = "Reset the selected module"] - pub const RESET: Self = Self(0x01); + #[doc = "RCC AHB1 Peripheral Reset Register"] + pub fn ahb1rstr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(128usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Sai1sel(pub u8); - impl Sai1sel { - #[doc = "pll1_q selected as peripheral clock"] - pub const PLL1_Q: Self = Self(0); - #[doc = "pll2_p selected as peripheral clock"] - pub const PLL2_P: Self = Self(0x01); - #[doc = "pll3_p selected as peripheral clock"] - pub const PLL3_P: Self = Self(0x02); - #[doc = "I2S_CKIN selected as peripheral clock"] - pub const I2S_CKIN: Self = Self(0x03); - #[doc = "PER selected as peripheral clock"] - pub const PER: Self = Self(0x04); + #[doc = "RCC AHB2 Peripheral Reset Register"] + pub fn ahb2rstr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(132usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ahb3lpenrMdmalpen(pub u8); - impl Ahb3lpenrMdmalpen { - #[doc = "The selected clock is disabled during csleep mode"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled during csleep mode"] - pub const ENABLED: Self = Self(0x01); + #[doc = "RCC AHB4 Peripheral Reset Register"] + pub fn ahb4rstr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(136usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct C1Apb3enrLtdcen(pub u8); - impl C1Apb3enrLtdcen { - #[doc = "The selected clock is disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled"] - pub const ENABLED: Self = Self(0x01); + #[doc = "RCC APB3 Peripheral Reset Register"] + pub fn apb3rstr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(140usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lsedrv(pub u8); - impl Lsedrv { - #[doc = "Lowest LSE oscillator driving capability"] - pub const LOWEST: Self = Self(0); - #[doc = "Medium low LSE oscillator driving capability"] - pub const MEDIUMLOW: Self = Self(0x01); - #[doc = "Medium high LSE oscillator driving capability"] - pub const MEDIUMHIGH: Self = Self(0x02); - #[doc = "Highest LSE oscillator driving capability"] - pub const HIGHEST: Self = Self(0x03); + #[doc = "RCC APB1 Peripheral Reset Register"] + pub fn apb1lrstr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(144usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ahb3enrMdmaen(pub u8); - impl Ahb3enrMdmaen { - #[doc = "The selected clock is disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled"] - pub const ENABLED: Self = Self(0x01); + #[doc = "RCC APB1 Peripheral Reset Register"] + pub fn apb1hrstr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(148usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Apb3enrLtdcen(pub u8); - impl Apb3enrLtdcen { - #[doc = "The selected clock is disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled"] - pub const ENABLED: Self = Self(0x01); + #[doc = "RCC APB2 Peripheral Reset Register"] + pub fn apb2rstr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(152usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Timpre(pub u8); - impl Timpre { - #[doc = "Timer kernel clock equal to 2x pclk by default"] - pub const DEFAULTX2: Self = Self(0); - #[doc = "Timer kernel clock equal to 4x pclk by default"] - pub const DEFAULTX4: Self = Self(0x01); + #[doc = "RCC APB4 Peripheral Reset Register"] + pub fn apb4rstr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(156usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct C1Apb2enrTim1en(pub u8); - impl C1Apb2enrTim1en { - #[doc = "The selected clock is disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled"] - pub const ENABLED: Self = Self(0x01); + #[doc = "RCC Global Control Register"] + pub fn gcr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(160usize)) } + } + #[doc = "RCC D3 Autonomous mode Register"] + pub fn d3amr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(168usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct C1Ahb4lpenrGpioalpen(pub u8); - impl C1Ahb4lpenrGpioalpen { - #[doc = "The selected clock is disabled during csleep mode"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled during csleep mode"] - pub const ENABLED: Self = Self(0x01); + #[doc = "RCC Reset Status Register"] + pub fn rsr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(208usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ahb4lpenrGpioalpen(pub u8); - impl Ahb4lpenrGpioalpen { - #[doc = "The selected clock is disabled during csleep mode"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled during csleep mode"] - pub const ENABLED: Self = Self(0x01); + #[doc = "RCC AHB3 Clock Register"] + pub fn ahb3enr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(212usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Sdmmcsel(pub u8); - impl Sdmmcsel { - #[doc = "pll1_q selected as peripheral clock"] - pub const PLL1_Q: Self = Self(0); - #[doc = "pll2_r selected as peripheral clock"] - pub const PLL2_R: Self = Self(0x01); + #[doc = "RCC AHB1 Clock Register"] + pub fn ahb1enr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(216usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct D1ppre(pub u8); - impl D1ppre { - #[doc = "rcc_hclk not divided"] - pub const DIV1: Self = Self(0); - #[doc = "rcc_hclk divided by 2"] - pub const DIV2: Self = Self(0x04); - #[doc = "rcc_hclk divided by 4"] - pub const DIV4: Self = Self(0x05); - #[doc = "rcc_hclk divided by 8"] - pub const DIV8: Self = Self(0x06); - #[doc = "rcc_hclk divided by 16"] - pub const DIV16: Self = Self(0x07); + #[doc = "RCC AHB2 Clock Register"] + pub fn ahb2enr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(220usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Apb4lpenrSyscfglpen(pub u8); - impl Apb4lpenrSyscfglpen { - #[doc = "The selected clock is disabled during csleep mode"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled during csleep mode"] - pub const ENABLED: Self = Self(0x01); + #[doc = "RCC AHB4 Clock Register"] + pub fn ahb4enr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(224usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct RsrRmvf(pub u8); - impl RsrRmvf { - #[doc = "Not clearing the the reset flags"] - pub const NOTACTIVE: Self = Self(0); - #[doc = "Clear the reset flags"] - pub const CLEAR: Self = Self(0x01); + #[doc = "RCC APB3 Clock Register"] + pub fn apb3enr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(228usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct C1Ahb3lpenrMdmalpen(pub u8); - impl C1Ahb3lpenrMdmalpen { - #[doc = "The selected clock is disabled during csleep mode"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled during csleep mode"] - pub const ENABLED: Self = Self(0x01); + #[doc = "RCC APB1 Clock Register"] + pub fn apb1lenr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(232usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lserdyr(pub u8); - impl Lserdyr { - #[doc = "LSE oscillator not ready"] - pub const NOTREADY: Self = Self(0); - #[doc = "LSE oscillator ready"] - pub const READY: Self = Self(0x01); + #[doc = "RCC APB1 Clock Register"] + pub fn apb1henr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(236usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Syscfgrst(pub u8); - impl Syscfgrst { - #[doc = "Reset the selected module"] - pub const RESET: Self = Self(0x01); + #[doc = "RCC APB2 Clock Register"] + pub fn apb2enr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(240usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lsirdyr(pub u8); - impl Lsirdyr { - #[doc = "LSI oscillator not ready"] - pub const NOTREADY: Self = Self(0); - #[doc = "LSI oscillator ready"] - pub const READY: Self = Self(0x01); + #[doc = "RCC APB4 Clock Register"] + pub fn apb4enr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(244usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Dma1rst(pub u8); - impl Dma1rst { - #[doc = "Reset the selected module"] - pub const RESET: Self = Self(0x01); + #[doc = "RCC AHB3 Sleep Clock Register"] + pub fn ahb3lpenr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(252usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Camitfrst(pub u8); - impl Camitfrst { - #[doc = "Reset the selected module"] - pub const RESET: Self = Self(0x01); + #[doc = "RCC AHB1 Sleep Clock Register"] + pub fn ahb1lpenr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(256usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct C1Apb1llpenrTim2lpen(pub u8); - impl C1Apb1llpenrTim2lpen { - #[doc = "The selected clock is disabled during csleep mode"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled during csleep mode"] - pub const ENABLED: Self = Self(0x01); + #[doc = "RCC AHB2 Sleep Clock Register"] + pub fn ahb2lpenr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(260usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Crsrst(pub u8); - impl Crsrst { - #[doc = "Reset the selected module"] - pub const RESET: Self = Self(0x01); + #[doc = "RCC AHB4 Sleep Clock Register"] + pub fn ahb4lpenr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(264usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lseon(pub u8); - impl Lseon { - #[doc = "LSE oscillator Off"] - pub const OFF: Self = Self(0); - #[doc = "LSE oscillator On"] - pub const ON: Self = Self(0x01); + #[doc = "RCC APB3 Sleep Clock Register"] + pub fn apb3lpenr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(268usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct RsrCpurstfr(pub u8); - impl RsrCpurstfr { - #[doc = "No reset occoured for block"] - pub const NORESETOCCOURED: Self = Self(0); - #[doc = "Reset occoured for block"] - pub const RESETOCCOURRED: Self = Self(0x01); + #[doc = "RCC APB1 Low Sleep Clock Register"] + pub fn apb1llpenr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(272usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Tim2rst(pub u8); - impl Tim2rst { - #[doc = "Reset the selected module"] - pub const RESET: Self = Self(0x01); + #[doc = "RCC APB1 High Sleep Clock Register"] + pub fn apb1hlpenr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(276usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Rtcsel(pub u8); - impl Rtcsel { - #[doc = "No clock"] - pub const NOCLOCK: Self = Self(0); - #[doc = "LSE oscillator clock used as RTC clock"] - pub const LSE: Self = Self(0x01); - #[doc = "LSI oscillator clock used as RTC clock"] - pub const LSI: Self = Self(0x02); - #[doc = "HSE oscillator clock divided by a prescaler used as RTC clock"] - pub const HSE: Self = Self(0x03); + #[doc = "RCC APB2 Sleep Clock Register"] + pub fn apb2lpenr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(280usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct C1Apb4enrSyscfgen(pub u8); - impl C1Apb4enrSyscfgen { - #[doc = "The selected clock is disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "The selected clock is enabled"] - pub const ENABLED: Self = Self(0x01); + #[doc = "RCC APB4 Sleep Clock Register"] + pub fn apb4lpenr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(284usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Tim1rst(pub u8); - impl Tim1rst { - #[doc = "Reset the selected module"] - pub const RESET: Self = Self(0x01); + #[doc = "RCC Reset Status Register"] + pub fn c1_rsr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(304usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Usart234578sel(pub u8); - impl Usart234578sel { - #[doc = "rcc_pclk1 selected as peripheral clock"] - pub const RCC_PCLK1: Self = Self(0); - #[doc = "pll2_q selected as peripheral clock"] - pub const PLL2_Q: Self = Self(0x01); - #[doc = "pll3_q selected as peripheral clock"] - pub const PLL3_Q: Self = Self(0x02); - #[doc = "hsi_ker selected as peripheral clock"] - pub const HSI_KER: Self = Self(0x03); - #[doc = "csi_ker selected as peripheral clock"] - pub const CSI_KER: Self = Self(0x04); - #[doc = "LSE selected as peripheral clock"] - pub const LSE: Self = Self(0x05); + #[doc = "RCC AHB3 Clock Register"] + pub fn c1_ahb3enr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(308usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Hrtimsel(pub u8); - impl Hrtimsel { - #[doc = "The HRTIM prescaler clock source is the same as other timers (rcc_timy_ker_ck)"] - pub const TIMY_KER: Self = Self(0); - #[doc = "The HRTIM prescaler clock source is the CPU clock (c_ck)"] - pub const C_CK: Self = Self(0x01); + #[doc = "RCC AHB1 Clock Register"] + pub fn c1_ahb1enr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(312usize)) } + } + #[doc = "RCC AHB2 Clock Register"] + pub fn c1_ahb2enr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(316usize)) } + } + #[doc = "RCC AHB4 Clock Register"] + pub fn c1_ahb4enr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(320usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ww1rsc(pub u8); - impl Ww1rsc { - #[doc = "Clear WWDG1 scope control"] - pub const CLEAR: Self = Self(0); - #[doc = "Set WWDG1 scope control"] - pub const SET: Self = Self(0x01); + #[doc = "RCC APB3 Clock Register"] + pub fn c1_apb3enr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(324usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Hpre(pub u8); - impl Hpre { - #[doc = "sys_ck not divided"] - pub const DIV1: Self = Self(0); - #[doc = "sys_ck divided by 2"] - pub const DIV2: Self = Self(0x08); - #[doc = "sys_ck divided by 4"] - pub const DIV4: Self = Self(0x09); - #[doc = "sys_ck divided by 8"] - pub const DIV8: Self = Self(0x0a); - #[doc = "sys_ck divided by 16"] - pub const DIV16: Self = Self(0x0b); - #[doc = "sys_ck divided by 64"] - pub const DIV64: Self = Self(0x0c); - #[doc = "sys_ck divided by 128"] - pub const DIV128: Self = Self(0x0d); - #[doc = "sys_ck divided by 256"] - pub const DIV256: Self = Self(0x0e); - #[doc = "sys_ck divided by 512"] - pub const DIV512: Self = Self(0x0f); + #[doc = "RCC APB1 Clock Register"] + pub fn c1_apb1lenr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(328usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lsirdyc(pub u8); - impl Lsirdyc { - #[doc = "Clear interrupt flag"] - pub const CLEAR: Self = Self(0x01); + #[doc = "RCC APB1 Clock Register"] + pub fn c1_apb1henr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(332usize)) } } - } -} -pub mod usart_v1 { - use crate::generic::*; - #[doc = "Universal asynchronous receiver transmitter"] - #[derive(Copy, Clone)] - pub struct Uart(pub *mut u8); - unsafe impl Send for Uart {} - unsafe impl Sync for Uart {} - impl Uart { - #[doc = "Status register"] - pub fn sr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(0usize)) } + #[doc = "RCC APB2 Clock Register"] + pub fn c1_apb2enr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(336usize)) } } - #[doc = "Data register"] - pub fn dr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(4usize)) } + #[doc = "RCC APB4 Clock Register"] + pub fn c1_apb4enr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(340usize)) } } - #[doc = "Baud rate register"] - pub fn brr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(8usize)) } + #[doc = "RCC AHB3 Sleep Clock Register"] + pub fn c1_ahb3lpenr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(348usize)) } } - #[doc = "Control register 1"] - pub fn cr1(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(12usize)) } + #[doc = "RCC AHB1 Sleep Clock Register"] + pub fn c1_ahb1lpenr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(352usize)) } } - #[doc = "Control register 2"] - pub fn cr2(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(16usize)) } + #[doc = "RCC AHB2 Sleep Clock Register"] + pub fn c1_ahb2lpenr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(356usize)) } } - #[doc = "Control register 3"] - pub fn cr3(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(20usize)) } + #[doc = "RCC AHB4 Sleep Clock Register"] + pub fn c1_ahb4lpenr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(360usize)) } } - } - #[doc = "Universal synchronous asynchronous receiver transmitter"] - #[derive(Copy, Clone)] - pub struct Usart(pub *mut u8); - unsafe impl Send for Usart {} - unsafe impl Sync for Usart {} - impl Usart { - #[doc = "Status register"] - pub fn sr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(0usize)) } + #[doc = "RCC APB3 Sleep Clock Register"] + pub fn c1_apb3lpenr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(364usize)) } } - #[doc = "Data register"] - pub fn dr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(4usize)) } + #[doc = "RCC APB1 Low Sleep Clock Register"] + pub fn c1_apb1llpenr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(368usize)) } } - #[doc = "Baud rate register"] - pub fn brr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(8usize)) } + #[doc = "RCC APB1 High Sleep Clock Register"] + pub fn c1_apb1hlpenr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(372usize)) } } - #[doc = "Control register 1"] - pub fn cr1(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(12usize)) } + #[doc = "RCC APB2 Sleep Clock Register"] + pub fn c1_apb2lpenr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(376usize)) } } - #[doc = "Control register 2"] - pub fn cr2(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(16usize)) } + #[doc = "RCC APB4 Sleep Clock Register"] + pub fn c1_apb4lpenr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(380usize)) } } - #[doc = "Control register 3"] - pub fn cr3(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(20usize)) } + } + pub mod regs { + use crate::generic::*; + #[doc = "RCC APB4 Clock Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct C1Apb4enr(pub u32); + impl C1Apb4enr { + #[doc = "SYSCFG peripheral clock enable"] + pub const fn syscfgen(&self) -> super::vals::C1Apb4enrSyscfgen { + let val = (self.0 >> 1usize) & 0x01; + super::vals::C1Apb4enrSyscfgen(val as u8) + } + #[doc = "SYSCFG peripheral clock enable"] + pub fn set_syscfgen(&mut self, val: super::vals::C1Apb4enrSyscfgen) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + } + #[doc = "LPUART1 Peripheral Clocks Enable"] + pub const fn lpuart1en(&self) -> super::vals::C1Apb4enrSyscfgen { + let val = (self.0 >> 3usize) & 0x01; + super::vals::C1Apb4enrSyscfgen(val as u8) + } + #[doc = "LPUART1 Peripheral Clocks Enable"] + pub fn set_lpuart1en(&mut self, val: super::vals::C1Apb4enrSyscfgen) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); + } + #[doc = "SPI6 Peripheral Clocks Enable"] + pub const fn spi6en(&self) -> super::vals::C1Apb4enrSyscfgen { + let val = (self.0 >> 5usize) & 0x01; + super::vals::C1Apb4enrSyscfgen(val as u8) + } + #[doc = "SPI6 Peripheral Clocks Enable"] + pub fn set_spi6en(&mut self, val: super::vals::C1Apb4enrSyscfgen) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + } + #[doc = "I2C4 Peripheral Clocks Enable"] + pub const fn i2c4en(&self) -> super::vals::C1Apb4enrSyscfgen { + let val = (self.0 >> 7usize) & 0x01; + super::vals::C1Apb4enrSyscfgen(val as u8) + } + #[doc = "I2C4 Peripheral Clocks Enable"] + pub fn set_i2c4en(&mut self, val: super::vals::C1Apb4enrSyscfgen) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); + } + #[doc = "LPTIM2 Peripheral Clocks Enable"] + pub const fn lptim2en(&self) -> super::vals::C1Apb4enrSyscfgen { + let val = (self.0 >> 9usize) & 0x01; + super::vals::C1Apb4enrSyscfgen(val as u8) + } + #[doc = "LPTIM2 Peripheral Clocks Enable"] + pub fn set_lptim2en(&mut self, val: super::vals::C1Apb4enrSyscfgen) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + } + #[doc = "LPTIM3 Peripheral Clocks Enable"] + pub const fn lptim3en(&self) -> super::vals::C1Apb4enrSyscfgen { + let val = (self.0 >> 10usize) & 0x01; + super::vals::C1Apb4enrSyscfgen(val as u8) + } + #[doc = "LPTIM3 Peripheral Clocks Enable"] + pub fn set_lptim3en(&mut self, val: super::vals::C1Apb4enrSyscfgen) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); + } + #[doc = "LPTIM4 Peripheral Clocks Enable"] + pub const fn lptim4en(&self) -> super::vals::C1Apb4enrSyscfgen { + let val = (self.0 >> 11usize) & 0x01; + super::vals::C1Apb4enrSyscfgen(val as u8) + } + #[doc = "LPTIM4 Peripheral Clocks Enable"] + pub fn set_lptim4en(&mut self, val: super::vals::C1Apb4enrSyscfgen) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); + } + #[doc = "LPTIM5 Peripheral Clocks Enable"] + pub const fn lptim5en(&self) -> super::vals::C1Apb4enrSyscfgen { + let val = (self.0 >> 12usize) & 0x01; + super::vals::C1Apb4enrSyscfgen(val as u8) + } + #[doc = "LPTIM5 Peripheral Clocks Enable"] + pub fn set_lptim5en(&mut self, val: super::vals::C1Apb4enrSyscfgen) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); + } + #[doc = "COMP1/2 peripheral clock enable"] + pub const fn comp12en(&self) -> super::vals::C1Apb4enrSyscfgen { + let val = (self.0 >> 14usize) & 0x01; + super::vals::C1Apb4enrSyscfgen(val as u8) + } + #[doc = "COMP1/2 peripheral clock enable"] + pub fn set_comp12en(&mut self, val: super::vals::C1Apb4enrSyscfgen) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); + } + #[doc = "VREF peripheral clock enable"] + pub const fn vrefen(&self) -> super::vals::C1Apb4enrSyscfgen { + let val = (self.0 >> 15usize) & 0x01; + super::vals::C1Apb4enrSyscfgen(val as u8) + } + #[doc = "VREF peripheral clock enable"] + pub fn set_vrefen(&mut self, val: super::vals::C1Apb4enrSyscfgen) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + } + #[doc = "RTC APB Clock Enable"] + pub const fn rtcapben(&self) -> super::vals::C1Apb4enrSyscfgen { + let val = (self.0 >> 16usize) & 0x01; + super::vals::C1Apb4enrSyscfgen(val as u8) + } + #[doc = "RTC APB Clock Enable"] + pub fn set_rtcapben(&mut self, val: super::vals::C1Apb4enrSyscfgen) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + } + #[doc = "SAI4 Peripheral Clocks Enable"] + pub const fn sai4en(&self) -> super::vals::C1Apb4enrSyscfgen { + let val = (self.0 >> 21usize) & 0x01; + super::vals::C1Apb4enrSyscfgen(val as u8) + } + #[doc = "SAI4 Peripheral Clocks Enable"] + pub fn set_sai4en(&mut self, val: super::vals::C1Apb4enrSyscfgen) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); + } + } + impl Default for C1Apb4enr { + fn default() -> C1Apb4enr { + C1Apb4enr(0) + } + } + #[doc = "RCC AHB2 Peripheral Reset Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ahb2rstr(pub u32); + impl Ahb2rstr { + #[doc = "CAMITF block reset"] + pub const fn camitfrst(&self) -> super::vals::Camitfrst { + let val = (self.0 >> 0usize) & 0x01; + super::vals::Camitfrst(val as u8) + } + #[doc = "CAMITF block reset"] + pub fn set_camitfrst(&mut self, val: super::vals::Camitfrst) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + } + #[doc = "Cryptography block reset"] + pub const fn cryptrst(&self) -> super::vals::Camitfrst { + let val = (self.0 >> 4usize) & 0x01; + super::vals::Camitfrst(val as u8) + } + #[doc = "Cryptography block reset"] + pub fn set_cryptrst(&mut self, val: super::vals::Camitfrst) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + } + #[doc = "Hash block reset"] + pub const fn hashrst(&self) -> super::vals::Camitfrst { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Camitfrst(val as u8) + } + #[doc = "Hash block reset"] + pub fn set_hashrst(&mut self, val: super::vals::Camitfrst) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + } + #[doc = "Random Number Generator block reset"] + pub const fn rngrst(&self) -> super::vals::Camitfrst { + let val = (self.0 >> 6usize) & 0x01; + super::vals::Camitfrst(val as u8) + } + #[doc = "Random Number Generator block reset"] + pub fn set_rngrst(&mut self, val: super::vals::Camitfrst) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); + } + #[doc = "SDMMC2 and SDMMC2 Delay block reset"] + pub const fn sdmmc2rst(&self) -> super::vals::Camitfrst { + let val = (self.0 >> 9usize) & 0x01; + super::vals::Camitfrst(val as u8) + } + #[doc = "SDMMC2 and SDMMC2 Delay block reset"] + pub fn set_sdmmc2rst(&mut self, val: super::vals::Camitfrst) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + } } - #[doc = "Guard time and prescaler register"] - pub fn gtpr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(24usize)) } + impl Default for Ahb2rstr { + fn default() -> Ahb2rstr { + Ahb2rstr(0) + } } - } - pub mod regs { - use crate::generic::*; - #[doc = "Data register"] + #[doc = "RCC HSI configuration register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Dr(pub u32); - impl Dr { - #[doc = "Data value"] - pub const fn dr(&self) -> u16 { - let val = (self.0 >> 0usize) & 0x01ff; + pub struct Hsicfgr(pub u32); + impl Hsicfgr { + #[doc = "HSI clock calibration"] + pub const fn hsical(&self) -> u16 { + let val = (self.0 >> 0usize) & 0x0fff; val as u16 } - #[doc = "Data value"] - pub fn set_dr(&mut self, val: u16) { - self.0 = (self.0 & !(0x01ff << 0usize)) | (((val as u32) & 0x01ff) << 0usize); + #[doc = "HSI clock calibration"] + pub fn set_hsical(&mut self, val: u16) { + self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize); + } + #[doc = "HSI clock trimming"] + pub const fn hsitrim(&self) -> u8 { + let val = (self.0 >> 24usize) & 0x7f; + val as u8 + } + #[doc = "HSI clock trimming"] + pub fn set_hsitrim(&mut self, val: u8) { + self.0 = (self.0 & !(0x7f << 24usize)) | (((val as u32) & 0x7f) << 24usize); } } - impl Default for Dr { - fn default() -> Dr { - Dr(0) + impl Default for Hsicfgr { + fn default() -> Hsicfgr { + Hsicfgr(0) } } - #[doc = "Control register 3"] + #[doc = "RCC APB1 Low Sleep Clock Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr3(pub u32); - impl Cr3 { - #[doc = "Error interrupt enable"] - pub const fn eie(&self) -> bool { + pub struct Apb1llpenr(pub u32); + impl Apb1llpenr { + #[doc = "TIM2 peripheral clock enable during CSleep mode"] + pub const fn tim2lpen(&self) -> super::vals::Apb1llpenrTim2lpen { let val = (self.0 >> 0usize) & 0x01; - val != 0 + super::vals::Apb1llpenrTim2lpen(val as u8) } - #[doc = "Error interrupt enable"] - pub fn set_eie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + #[doc = "TIM2 peripheral clock enable during CSleep mode"] + pub fn set_tim2lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "IrDA mode enable"] - pub const fn iren(&self) -> bool { + #[doc = "TIM3 peripheral clock enable during CSleep mode"] + pub const fn tim3lpen(&self) -> super::vals::Apb1llpenrTim2lpen { let val = (self.0 >> 1usize) & 0x01; - val != 0 + super::vals::Apb1llpenrTim2lpen(val as u8) } - #[doc = "IrDA mode enable"] - pub fn set_iren(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + #[doc = "TIM3 peripheral clock enable during CSleep mode"] + pub fn set_tim3lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - #[doc = "IrDA low-power"] - pub const fn irlp(&self) -> super::vals::Irlp { + #[doc = "TIM4 peripheral clock enable during CSleep mode"] + pub const fn tim4lpen(&self) -> super::vals::Apb1llpenrTim2lpen { let val = (self.0 >> 2usize) & 0x01; - super::vals::Irlp(val as u8) + super::vals::Apb1llpenrTim2lpen(val as u8) } - #[doc = "IrDA low-power"] - pub fn set_irlp(&mut self, val: super::vals::Irlp) { + #[doc = "TIM4 peripheral clock enable during CSleep mode"] + pub fn set_tim4lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); } - #[doc = "Half-duplex selection"] - pub const fn hdsel(&self) -> super::vals::Hdsel { + #[doc = "TIM5 peripheral clock enable during CSleep mode"] + pub const fn tim5lpen(&self) -> super::vals::Apb1llpenrTim2lpen { let val = (self.0 >> 3usize) & 0x01; - super::vals::Hdsel(val as u8) + super::vals::Apb1llpenrTim2lpen(val as u8) } - #[doc = "Half-duplex selection"] - pub fn set_hdsel(&mut self, val: super::vals::Hdsel) { + #[doc = "TIM5 peripheral clock enable during CSleep mode"] + pub fn set_tim5lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); } - #[doc = "DMA enable receiver"] - pub const fn dmar(&self) -> bool { + #[doc = "TIM6 peripheral clock enable during CSleep mode"] + pub const fn tim6lpen(&self) -> super::vals::Apb1llpenrTim2lpen { + let val = (self.0 >> 4usize) & 0x01; + super::vals::Apb1llpenrTim2lpen(val as u8) + } + #[doc = "TIM6 peripheral clock enable during CSleep mode"] + pub fn set_tim6lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + } + #[doc = "TIM7 peripheral clock enable during CSleep mode"] + pub const fn tim7lpen(&self) -> super::vals::Apb1llpenrTim2lpen { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Apb1llpenrTim2lpen(val as u8) + } + #[doc = "TIM7 peripheral clock enable during CSleep mode"] + pub fn set_tim7lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + } + #[doc = "TIM12 peripheral clock enable during CSleep mode"] + pub const fn tim12lpen(&self) -> super::vals::Apb1llpenrTim2lpen { let val = (self.0 >> 6usize) & 0x01; - val != 0 + super::vals::Apb1llpenrTim2lpen(val as u8) } - #[doc = "DMA enable receiver"] - pub fn set_dmar(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + #[doc = "TIM12 peripheral clock enable during CSleep mode"] + pub fn set_tim12lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); } - #[doc = "DMA enable transmitter"] - pub const fn dmat(&self) -> bool { + #[doc = "TIM13 peripheral clock enable during CSleep mode"] + pub const fn tim13lpen(&self) -> super::vals::Apb1llpenrTim2lpen { let val = (self.0 >> 7usize) & 0x01; - val != 0 + super::vals::Apb1llpenrTim2lpen(val as u8) } - #[doc = "DMA enable transmitter"] - pub fn set_dmat(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + #[doc = "TIM13 peripheral clock enable during CSleep mode"] + pub fn set_tim13lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); } - } - impl Default for Cr3 { - fn default() -> Cr3 { - Cr3(0) + #[doc = "TIM14 peripheral clock enable during CSleep mode"] + pub const fn tim14lpen(&self) -> super::vals::Apb1llpenrTim2lpen { + let val = (self.0 >> 8usize) & 0x01; + super::vals::Apb1llpenrTim2lpen(val as u8) } - } - #[doc = "Control register 3"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr3Usart(pub u32); - impl Cr3Usart { - #[doc = "Error interrupt enable"] - pub const fn eie(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; - val != 0 + #[doc = "TIM14 peripheral clock enable during CSleep mode"] + pub fn set_tim14lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); } - #[doc = "Error interrupt enable"] - pub fn set_eie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + #[doc = "LPTIM1 Peripheral Clocks Enable During CSleep Mode"] + pub const fn lptim1lpen(&self) -> super::vals::Apb1llpenrTim2lpen { + let val = (self.0 >> 9usize) & 0x01; + super::vals::Apb1llpenrTim2lpen(val as u8) } - #[doc = "IrDA mode enable"] - pub const fn iren(&self) -> bool { - let val = (self.0 >> 1usize) & 0x01; - val != 0 + #[doc = "LPTIM1 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_lptim1lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + } + #[doc = "SPI2 Peripheral Clocks Enable During CSleep Mode"] + pub const fn spi2lpen(&self) -> super::vals::Apb1llpenrTim2lpen { + let val = (self.0 >> 14usize) & 0x01; + super::vals::Apb1llpenrTim2lpen(val as u8) + } + #[doc = "SPI2 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_spi2lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); + } + #[doc = "SPI3 Peripheral Clocks Enable During CSleep Mode"] + pub const fn spi3lpen(&self) -> super::vals::Apb1llpenrTim2lpen { + let val = (self.0 >> 15usize) & 0x01; + super::vals::Apb1llpenrTim2lpen(val as u8) + } + #[doc = "SPI3 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_spi3lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + } + #[doc = "SPDIFRX Peripheral Clocks Enable During CSleep Mode"] + pub const fn spdifrxlpen(&self) -> super::vals::Apb1llpenrTim2lpen { + let val = (self.0 >> 16usize) & 0x01; + super::vals::Apb1llpenrTim2lpen(val as u8) + } + #[doc = "SPDIFRX Peripheral Clocks Enable During CSleep Mode"] + pub fn set_spdifrxlpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + } + #[doc = "USART2 Peripheral Clocks Enable During CSleep Mode"] + pub const fn usart2lpen(&self) -> super::vals::Apb1llpenrTim2lpen { + let val = (self.0 >> 17usize) & 0x01; + super::vals::Apb1llpenrTim2lpen(val as u8) + } + #[doc = "USART2 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_usart2lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); + } + #[doc = "USART3 Peripheral Clocks Enable During CSleep Mode"] + pub const fn usart3lpen(&self) -> super::vals::Apb1llpenrTim2lpen { + let val = (self.0 >> 18usize) & 0x01; + super::vals::Apb1llpenrTim2lpen(val as u8) } - #[doc = "IrDA mode enable"] - pub fn set_iren(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + #[doc = "USART3 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_usart3lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); } - #[doc = "IrDA low-power"] - pub const fn irlp(&self) -> super::vals::Irlp { - let val = (self.0 >> 2usize) & 0x01; - super::vals::Irlp(val as u8) + #[doc = "UART4 Peripheral Clocks Enable During CSleep Mode"] + pub const fn uart4lpen(&self) -> super::vals::Apb1llpenrTim2lpen { + let val = (self.0 >> 19usize) & 0x01; + super::vals::Apb1llpenrTim2lpen(val as u8) } - #[doc = "IrDA low-power"] - pub fn set_irlp(&mut self, val: super::vals::Irlp) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); + #[doc = "UART4 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_uart4lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); } - #[doc = "Half-duplex selection"] - pub const fn hdsel(&self) -> super::vals::Hdsel { - let val = (self.0 >> 3usize) & 0x01; - super::vals::Hdsel(val as u8) + #[doc = "UART5 Peripheral Clocks Enable During CSleep Mode"] + pub const fn uart5lpen(&self) -> super::vals::Apb1llpenrTim2lpen { + let val = (self.0 >> 20usize) & 0x01; + super::vals::Apb1llpenrTim2lpen(val as u8) } - #[doc = "Half-duplex selection"] - pub fn set_hdsel(&mut self, val: super::vals::Hdsel) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); + #[doc = "UART5 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_uart5lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize); } - #[doc = "Smartcard NACK enable"] - pub const fn nack(&self) -> bool { - let val = (self.0 >> 4usize) & 0x01; - val != 0 + #[doc = "I2C1 Peripheral Clocks Enable During CSleep Mode"] + pub const fn i2c1lpen(&self) -> super::vals::Apb1llpenrTim2lpen { + let val = (self.0 >> 21usize) & 0x01; + super::vals::Apb1llpenrTim2lpen(val as u8) } - #[doc = "Smartcard NACK enable"] - pub fn set_nack(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); + #[doc = "I2C1 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_i2c1lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); } - #[doc = "Smartcard mode enable"] - pub const fn scen(&self) -> bool { - let val = (self.0 >> 5usize) & 0x01; - val != 0 + #[doc = "I2C2 Peripheral Clocks Enable During CSleep Mode"] + pub const fn i2c2lpen(&self) -> super::vals::Apb1llpenrTim2lpen { + let val = (self.0 >> 22usize) & 0x01; + super::vals::Apb1llpenrTim2lpen(val as u8) } - #[doc = "Smartcard mode enable"] - pub fn set_scen(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); + #[doc = "I2C2 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_i2c2lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); } - #[doc = "DMA enable receiver"] - pub const fn dmar(&self) -> bool { - let val = (self.0 >> 6usize) & 0x01; - val != 0 + #[doc = "I2C3 Peripheral Clocks Enable During CSleep Mode"] + pub const fn i2c3lpen(&self) -> super::vals::Apb1llpenrTim2lpen { + let val = (self.0 >> 23usize) & 0x01; + super::vals::Apb1llpenrTim2lpen(val as u8) } - #[doc = "DMA enable receiver"] - pub fn set_dmar(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + #[doc = "I2C3 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_i2c3lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize); } - #[doc = "DMA enable transmitter"] - pub const fn dmat(&self) -> bool { - let val = (self.0 >> 7usize) & 0x01; - val != 0 + #[doc = "HDMI-CEC Peripheral Clocks Enable During CSleep Mode"] + pub const fn ceclpen(&self) -> super::vals::Apb1llpenrTim2lpen { + let val = (self.0 >> 27usize) & 0x01; + super::vals::Apb1llpenrTim2lpen(val as u8) } - #[doc = "DMA enable transmitter"] - pub fn set_dmat(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + #[doc = "HDMI-CEC Peripheral Clocks Enable During CSleep Mode"] + pub fn set_ceclpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize); } - #[doc = "RTS enable"] - pub const fn rtse(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; - val != 0 + #[doc = "DAC1/2 peripheral clock enable during CSleep mode"] + pub const fn dac12lpen(&self) -> super::vals::Apb1llpenrTim2lpen { + let val = (self.0 >> 29usize) & 0x01; + super::vals::Apb1llpenrTim2lpen(val as u8) } - #[doc = "RTS enable"] - pub fn set_rtse(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + #[doc = "DAC1/2 peripheral clock enable during CSleep mode"] + pub fn set_dac12lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); } - #[doc = "CTS enable"] - pub const fn ctse(&self) -> bool { - let val = (self.0 >> 9usize) & 0x01; - val != 0 + #[doc = "UART7 Peripheral Clocks Enable During CSleep Mode"] + pub const fn uart7lpen(&self) -> super::vals::Apb1llpenrTim2lpen { + let val = (self.0 >> 30usize) & 0x01; + super::vals::Apb1llpenrTim2lpen(val as u8) } - #[doc = "CTS enable"] - pub fn set_ctse(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + #[doc = "UART7 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_uart7lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize); } - #[doc = "CTS interrupt enable"] - pub const fn ctsie(&self) -> bool { - let val = (self.0 >> 10usize) & 0x01; - val != 0 + #[doc = "UART8 Peripheral Clocks Enable During CSleep Mode"] + pub const fn uart8lpen(&self) -> super::vals::Apb1llpenrTim2lpen { + let val = (self.0 >> 31usize) & 0x01; + super::vals::Apb1llpenrTim2lpen(val as u8) } - #[doc = "CTS interrupt enable"] - pub fn set_ctsie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); + #[doc = "UART8 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_uart8lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); } } - impl Default for Cr3Usart { - fn default() -> Cr3Usart { - Cr3Usart(0) + impl Default for Apb1llpenr { + fn default() -> Apb1llpenr { + Apb1llpenr(0) } } - #[doc = "Status register"] + #[doc = "RCC Clock Control and Status Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct SrUsart(pub u32); - impl SrUsart { - #[doc = "Parity error"] - pub const fn pe(&self) -> bool { + pub struct Csr(pub u32); + impl Csr { + #[doc = "LSI oscillator enable"] + pub const fn lsion(&self) -> super::vals::Lsion { let val = (self.0 >> 0usize) & 0x01; - val != 0 + super::vals::Lsion(val as u8) } - #[doc = "Parity error"] - pub fn set_pe(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + #[doc = "LSI oscillator enable"] + pub fn set_lsion(&mut self, val: super::vals::Lsion) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "Framing error"] - pub const fn fe(&self) -> bool { + #[doc = "LSI oscillator ready"] + pub const fn lsirdy(&self) -> bool { let val = (self.0 >> 1usize) & 0x01; val != 0 } - #[doc = "Framing error"] - pub fn set_fe(&mut self, val: bool) { + #[doc = "LSI oscillator ready"] + pub fn set_lsirdy(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - #[doc = "Noise error flag"] - pub const fn ne(&self) -> bool { - let val = (self.0 >> 2usize) & 0x01; - val != 0 - } - #[doc = "Noise error flag"] - pub fn set_ne(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); - } - #[doc = "Overrun error"] - pub const fn ore(&self) -> bool { - let val = (self.0 >> 3usize) & 0x01; - val != 0 - } - #[doc = "Overrun error"] - pub fn set_ore(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); - } - #[doc = "IDLE line detected"] - pub const fn idle(&self) -> bool { - let val = (self.0 >> 4usize) & 0x01; - val != 0 - } - #[doc = "IDLE line detected"] - pub fn set_idle(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); - } - #[doc = "Read data register not empty"] - pub const fn rxne(&self) -> bool { - let val = (self.0 >> 5usize) & 0x01; - val != 0 - } - #[doc = "Read data register not empty"] - pub fn set_rxne(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); - } - #[doc = "Transmission complete"] - pub const fn tc(&self) -> bool { - let val = (self.0 >> 6usize) & 0x01; - val != 0 - } - #[doc = "Transmission complete"] - pub fn set_tc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); - } - #[doc = "Transmit data register empty"] - pub const fn txe(&self) -> bool { - let val = (self.0 >> 7usize) & 0x01; - val != 0 - } - #[doc = "Transmit data register empty"] - pub fn set_txe(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); - } - #[doc = "LIN break detection flag"] - pub const fn lbd(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; - val != 0 + } + impl Default for Csr { + fn default() -> Csr { + Csr(0) } - #[doc = "LIN break detection flag"] - pub fn set_lbd(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + } + #[doc = "RCC CSI configuration register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Csicfgr(pub u32); + impl Csicfgr { + #[doc = "CSI clock calibration"] + pub const fn csical(&self) -> u16 { + let val = (self.0 >> 0usize) & 0x01ff; + val as u16 } - #[doc = "CTS flag"] - pub const fn cts(&self) -> bool { - let val = (self.0 >> 9usize) & 0x01; - val != 0 + #[doc = "CSI clock calibration"] + pub fn set_csical(&mut self, val: u16) { + self.0 = (self.0 & !(0x01ff << 0usize)) | (((val as u32) & 0x01ff) << 0usize); } - #[doc = "CTS flag"] - pub fn set_cts(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + #[doc = "CSI clock trimming"] + pub const fn csitrim(&self) -> u8 { + let val = (self.0 >> 24usize) & 0x3f; + val as u8 + } + #[doc = "CSI clock trimming"] + pub fn set_csitrim(&mut self, val: u8) { + self.0 = (self.0 & !(0x3f << 24usize)) | (((val as u32) & 0x3f) << 24usize); } } - impl Default for SrUsart { - fn default() -> SrUsart { - SrUsart(0) + impl Default for Csicfgr { + fn default() -> Csicfgr { + Csicfgr(0) } } - #[doc = "Status register"] + #[doc = "RCC AHB2 Sleep Clock Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Sr(pub u32); - impl Sr { - #[doc = "Parity error"] - pub const fn pe(&self) -> bool { + pub struct Ahb2lpenr(pub u32); + impl Ahb2lpenr { + #[doc = "DCMI peripheral clock enable during csleep mode"] + pub const fn dcmilpen(&self) -> super::vals::Ahb2lpenrDcmilpen { let val = (self.0 >> 0usize) & 0x01; - val != 0 - } - #[doc = "Parity error"] - pub fn set_pe(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); - } - #[doc = "Framing error"] - pub const fn fe(&self) -> bool { - let val = (self.0 >> 1usize) & 0x01; - val != 0 - } - #[doc = "Framing error"] - pub fn set_fe(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); - } - #[doc = "Noise error flag"] - pub const fn ne(&self) -> bool { - let val = (self.0 >> 2usize) & 0x01; - val != 0 - } - #[doc = "Noise error flag"] - pub fn set_ne(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); - } - #[doc = "Overrun error"] - pub const fn ore(&self) -> bool { - let val = (self.0 >> 3usize) & 0x01; - val != 0 + super::vals::Ahb2lpenrDcmilpen(val as u8) } - #[doc = "Overrun error"] - pub fn set_ore(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); + #[doc = "DCMI peripheral clock enable during csleep mode"] + pub fn set_dcmilpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "IDLE line detected"] - pub const fn idle(&self) -> bool { + #[doc = "CRYPT peripheral clock enable during CSleep mode"] + pub const fn cryptlpen(&self) -> super::vals::Ahb2lpenrDcmilpen { let val = (self.0 >> 4usize) & 0x01; - val != 0 + super::vals::Ahb2lpenrDcmilpen(val as u8) } - #[doc = "IDLE line detected"] - pub fn set_idle(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); + #[doc = "CRYPT peripheral clock enable during CSleep mode"] + pub fn set_cryptlpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); } - #[doc = "Read data register not empty"] - pub const fn rxne(&self) -> bool { + #[doc = "HASH peripheral clock enable during CSleep mode"] + pub const fn hashlpen(&self) -> super::vals::Ahb2lpenrDcmilpen { let val = (self.0 >> 5usize) & 0x01; - val != 0 + super::vals::Ahb2lpenrDcmilpen(val as u8) } - #[doc = "Read data register not empty"] - pub fn set_rxne(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); + #[doc = "HASH peripheral clock enable during CSleep mode"] + pub fn set_hashlpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "Transmission complete"] - pub const fn tc(&self) -> bool { + #[doc = "RNG peripheral clock enable during CSleep mode"] + pub const fn rnglpen(&self) -> super::vals::Ahb2lpenrDcmilpen { let val = (self.0 >> 6usize) & 0x01; - val != 0 - } - #[doc = "Transmission complete"] - pub fn set_tc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + super::vals::Ahb2lpenrDcmilpen(val as u8) } - #[doc = "Transmit data register empty"] - pub const fn txe(&self) -> bool { - let val = (self.0 >> 7usize) & 0x01; - val != 0 + #[doc = "RNG peripheral clock enable during CSleep mode"] + pub fn set_rnglpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); } - #[doc = "Transmit data register empty"] - pub fn set_txe(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + #[doc = "SDMMC2 and SDMMC2 Delay Clock Enable During CSleep Mode"] + pub const fn sdmmc2lpen(&self) -> super::vals::Ahb2lpenrDcmilpen { + let val = (self.0 >> 9usize) & 0x01; + super::vals::Ahb2lpenrDcmilpen(val as u8) } - #[doc = "LIN break detection flag"] - pub const fn lbd(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; - val != 0 + #[doc = "SDMMC2 and SDMMC2 Delay Clock Enable During CSleep Mode"] + pub fn set_sdmmc2lpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); } - #[doc = "LIN break detection flag"] - pub fn set_lbd(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + #[doc = "SRAM1 Clock Enable During CSleep Mode"] + pub const fn sram1lpen(&self) -> super::vals::Ahb2lpenrDcmilpen { + let val = (self.0 >> 29usize) & 0x01; + super::vals::Ahb2lpenrDcmilpen(val as u8) } - } - impl Default for Sr { - fn default() -> Sr { - Sr(0) + #[doc = "SRAM1 Clock Enable During CSleep Mode"] + pub fn set_sram1lpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) { + self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); } - } - #[doc = "Baud rate register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Brr(pub u32); - impl Brr { - #[doc = "fraction of USARTDIV"] - pub const fn div_fraction(&self) -> u8 { - let val = (self.0 >> 0usize) & 0x0f; - val as u8 + #[doc = "SRAM2 Clock Enable During CSleep Mode"] + pub const fn sram2lpen(&self) -> super::vals::Ahb2lpenrDcmilpen { + let val = (self.0 >> 30usize) & 0x01; + super::vals::Ahb2lpenrDcmilpen(val as u8) } - #[doc = "fraction of USARTDIV"] - pub fn set_div_fraction(&mut self, val: u8) { - self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize); + #[doc = "SRAM2 Clock Enable During CSleep Mode"] + pub fn set_sram2lpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) { + self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize); } - #[doc = "mantissa of USARTDIV"] - pub const fn div_mantissa(&self) -> u16 { - let val = (self.0 >> 4usize) & 0x0fff; - val as u16 + #[doc = "SRAM3 Clock Enable During CSleep Mode"] + pub const fn sram3lpen(&self) -> super::vals::Ahb2lpenrDcmilpen { + let val = (self.0 >> 31usize) & 0x01; + super::vals::Ahb2lpenrDcmilpen(val as u8) } - #[doc = "mantissa of USARTDIV"] - pub fn set_div_mantissa(&mut self, val: u16) { - self.0 = (self.0 & !(0x0fff << 4usize)) | (((val as u32) & 0x0fff) << 4usize); + #[doc = "SRAM3 Clock Enable During CSleep Mode"] + pub fn set_sram3lpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) { + self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); } } - impl Default for Brr { - fn default() -> Brr { - Brr(0) + impl Default for Ahb2lpenr { + fn default() -> Ahb2lpenr { + Ahb2lpenr(0) } } - #[doc = "Control register 2"] + #[doc = "RCC Reset Status Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr2Usart(pub u32); - impl Cr2Usart { - #[doc = "Address of the USART node"] - pub const fn add(&self) -> u8 { - let val = (self.0 >> 0usize) & 0x0f; - val as u8 + pub struct Rsr(pub u32); + impl Rsr { + #[doc = "Remove reset flag"] + pub const fn rmvf(&self) -> super::vals::RsrRmvf { + let val = (self.0 >> 16usize) & 0x01; + super::vals::RsrRmvf(val as u8) } - #[doc = "Address of the USART node"] - pub fn set_add(&mut self, val: u8) { - self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize); + #[doc = "Remove reset flag"] + pub fn set_rmvf(&mut self, val: super::vals::RsrRmvf) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); } - #[doc = "lin break detection length"] - pub const fn lbdl(&self) -> super::vals::Lbdl { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Lbdl(val as u8) + #[doc = "CPU reset flag"] + pub const fn cpurstf(&self) -> bool { + let val = (self.0 >> 17usize) & 0x01; + val != 0 } - #[doc = "lin break detection length"] - pub fn set_lbdl(&mut self, val: super::vals::Lbdl) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + #[doc = "CPU reset flag"] + pub fn set_cpurstf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); } - #[doc = "LIN break detection interrupt enable"] - pub const fn lbdie(&self) -> bool { - let val = (self.0 >> 6usize) & 0x01; + #[doc = "D1 domain power switch reset flag"] + pub const fn d1rstf(&self) -> bool { + let val = (self.0 >> 19usize) & 0x01; val != 0 } - #[doc = "LIN break detection interrupt enable"] - pub fn set_lbdie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + #[doc = "D1 domain power switch reset flag"] + pub fn set_d1rstf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize); } - #[doc = "Last bit clock pulse"] - pub const fn lbcl(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; + #[doc = "D2 domain power switch reset flag"] + pub const fn d2rstf(&self) -> bool { + let val = (self.0 >> 20usize) & 0x01; val != 0 } - #[doc = "Last bit clock pulse"] - pub fn set_lbcl(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + #[doc = "D2 domain power switch reset flag"] + pub fn set_d2rstf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize); } - #[doc = "Clock phase"] - pub const fn cpha(&self) -> super::vals::Cpha { - let val = (self.0 >> 9usize) & 0x01; - super::vals::Cpha(val as u8) + #[doc = "BOR reset flag"] + pub const fn borrstf(&self) -> bool { + let val = (self.0 >> 21usize) & 0x01; + val != 0 } - #[doc = "Clock phase"] - pub fn set_cpha(&mut self, val: super::vals::Cpha) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + #[doc = "BOR reset flag"] + pub fn set_borrstf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); } - #[doc = "Clock polarity"] - pub const fn cpol(&self) -> super::vals::Cpol { - let val = (self.0 >> 10usize) & 0x01; - super::vals::Cpol(val as u8) + #[doc = "Pin reset flag (NRST)"] + pub const fn pinrstf(&self) -> bool { + let val = (self.0 >> 22usize) & 0x01; + val != 0 + } + #[doc = "Pin reset flag (NRST)"] + pub fn set_pinrstf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); + } + #[doc = "POR/PDR reset flag"] + pub const fn porrstf(&self) -> bool { + let val = (self.0 >> 23usize) & 0x01; + val != 0 + } + #[doc = "POR/PDR reset flag"] + pub fn set_porrstf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize); } - #[doc = "Clock polarity"] - pub fn set_cpol(&mut self, val: super::vals::Cpol) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); + #[doc = "System reset from CPU reset flag"] + pub const fn sftrstf(&self) -> bool { + let val = (self.0 >> 24usize) & 0x01; + val != 0 } - #[doc = "Clock enable"] - pub const fn clken(&self) -> bool { - let val = (self.0 >> 11usize) & 0x01; + #[doc = "System reset from CPU reset flag"] + pub fn set_sftrstf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize); + } + #[doc = "Independent Watchdog reset flag"] + pub const fn iwdg1rstf(&self) -> bool { + let val = (self.0 >> 26usize) & 0x01; val != 0 } - #[doc = "Clock enable"] - pub fn set_clken(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); + #[doc = "Independent Watchdog reset flag"] + pub fn set_iwdg1rstf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); } - #[doc = "STOP bits"] - pub const fn stop(&self) -> super::vals::Stop { - let val = (self.0 >> 12usize) & 0x03; - super::vals::Stop(val as u8) + #[doc = "Window Watchdog reset flag"] + pub const fn wwdg1rstf(&self) -> bool { + let val = (self.0 >> 28usize) & 0x01; + val != 0 } - #[doc = "STOP bits"] - pub fn set_stop(&mut self, val: super::vals::Stop) { - self.0 = (self.0 & !(0x03 << 12usize)) | (((val.0 as u32) & 0x03) << 12usize); + #[doc = "Window Watchdog reset flag"] + pub fn set_wwdg1rstf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize); } - #[doc = "LIN mode enable"] - pub const fn linen(&self) -> bool { - let val = (self.0 >> 14usize) & 0x01; + #[doc = "Reset due to illegal D1 DStandby or CPU CStop flag"] + pub const fn lpwrrstf(&self) -> bool { + let val = (self.0 >> 30usize) & 0x01; val != 0 } - #[doc = "LIN mode enable"] - pub fn set_linen(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); + #[doc = "Reset due to illegal D1 DStandby or CPU CStop flag"] + pub fn set_lpwrrstf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 30usize)) | (((val as u32) & 0x01) << 30usize); } } - impl Default for Cr2Usart { - fn default() -> Cr2Usart { - Cr2Usart(0) + impl Default for Rsr { + fn default() -> Rsr { + Rsr(0) } } - #[doc = "Control register 1"] + #[doc = "RCC Domain 1 Kernel Clock Configuration Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr1(pub u32); - impl Cr1 { - #[doc = "Send break"] - pub const fn sbk(&self) -> super::vals::Sbk { - let val = (self.0 >> 0usize) & 0x01; - super::vals::Sbk(val as u8) + pub struct D1ccipr(pub u32); + impl D1ccipr { + #[doc = "FMC kernel clock source selection"] + pub const fn fmcsel(&self) -> super::vals::Fmcsel { + let val = (self.0 >> 0usize) & 0x03; + super::vals::Fmcsel(val as u8) } - #[doc = "Send break"] - pub fn set_sbk(&mut self, val: super::vals::Sbk) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + #[doc = "FMC kernel clock source selection"] + pub fn set_fmcsel(&mut self, val: super::vals::Fmcsel) { + self.0 = (self.0 & !(0x03 << 0usize)) | (((val.0 as u32) & 0x03) << 0usize); } - #[doc = "Receiver wakeup"] - pub const fn rwu(&self) -> super::vals::Rwu { - let val = (self.0 >> 1usize) & 0x01; - super::vals::Rwu(val as u8) + #[doc = "QUADSPI kernel clock source selection"] + pub const fn qspisel(&self) -> super::vals::Fmcsel { + let val = (self.0 >> 4usize) & 0x03; + super::vals::Fmcsel(val as u8) } - #[doc = "Receiver wakeup"] - pub fn set_rwu(&mut self, val: super::vals::Rwu) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + #[doc = "QUADSPI kernel clock source selection"] + pub fn set_qspisel(&mut self, val: super::vals::Fmcsel) { + self.0 = (self.0 & !(0x03 << 4usize)) | (((val.0 as u32) & 0x03) << 4usize); } - #[doc = "Receiver enable"] - pub const fn re(&self) -> bool { - let val = (self.0 >> 2usize) & 0x01; - val != 0 + #[doc = "SDMMC kernel clock source selection"] + pub const fn sdmmcsel(&self) -> super::vals::Sdmmcsel { + let val = (self.0 >> 16usize) & 0x01; + super::vals::Sdmmcsel(val as u8) } - #[doc = "Receiver enable"] - pub fn set_re(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); + #[doc = "SDMMC kernel clock source selection"] + pub fn set_sdmmcsel(&mut self, val: super::vals::Sdmmcsel) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); } - #[doc = "Transmitter enable"] - pub const fn te(&self) -> bool { - let val = (self.0 >> 3usize) & 0x01; - val != 0 + #[doc = "per_ck clock source selection"] + pub const fn ckpersel(&self) -> super::vals::Ckpersel { + let val = (self.0 >> 28usize) & 0x03; + super::vals::Ckpersel(val as u8) } - #[doc = "Transmitter enable"] - pub fn set_te(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); + #[doc = "per_ck clock source selection"] + pub fn set_ckpersel(&mut self, val: super::vals::Ckpersel) { + self.0 = (self.0 & !(0x03 << 28usize)) | (((val.0 as u32) & 0x03) << 28usize); } - #[doc = "IDLE interrupt enable"] - pub const fn idleie(&self) -> bool { - let val = (self.0 >> 4usize) & 0x01; - val != 0 + } + impl Default for D1ccipr { + fn default() -> D1ccipr { + D1ccipr(0) } - #[doc = "IDLE interrupt enable"] - pub fn set_idleie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); + } + #[doc = "RCC AHB1 Clock Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct C1Ahb1enr(pub u32); + impl C1Ahb1enr { + #[doc = "DMA1 Clock Enable"] + pub const fn dma1en(&self) -> super::vals::C1Ahb1enrDma1en { + let val = (self.0 >> 0usize) & 0x01; + super::vals::C1Ahb1enrDma1en(val as u8) } - #[doc = "RXNE interrupt enable"] - pub const fn rxneie(&self) -> bool { - let val = (self.0 >> 5usize) & 0x01; - val != 0 + #[doc = "DMA1 Clock Enable"] + pub fn set_dma1en(&mut self, val: super::vals::C1Ahb1enrDma1en) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "RXNE interrupt enable"] - pub fn set_rxneie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); + #[doc = "DMA2 Clock Enable"] + pub const fn dma2en(&self) -> super::vals::C1Ahb1enrDma1en { + let val = (self.0 >> 1usize) & 0x01; + super::vals::C1Ahb1enrDma1en(val as u8) } - #[doc = "Transmission complete interrupt enable"] - pub const fn tcie(&self) -> bool { - let val = (self.0 >> 6usize) & 0x01; - val != 0 + #[doc = "DMA2 Clock Enable"] + pub fn set_dma2en(&mut self, val: super::vals::C1Ahb1enrDma1en) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - #[doc = "Transmission complete interrupt enable"] - pub fn set_tcie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + #[doc = "ADC1/2 Peripheral Clocks Enable"] + pub const fn adc12en(&self) -> super::vals::C1Ahb1enrDma1en { + let val = (self.0 >> 5usize) & 0x01; + super::vals::C1Ahb1enrDma1en(val as u8) } - #[doc = "TXE interrupt enable"] - pub const fn txeie(&self) -> bool { - let val = (self.0 >> 7usize) & 0x01; - val != 0 + #[doc = "ADC1/2 Peripheral Clocks Enable"] + pub fn set_adc12en(&mut self, val: super::vals::C1Ahb1enrDma1en) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "TXE interrupt enable"] - pub fn set_txeie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + #[doc = "Ethernet MAC bus interface Clock Enable"] + pub const fn eth1macen(&self) -> super::vals::C1Ahb1enrDma1en { + let val = (self.0 >> 15usize) & 0x01; + super::vals::C1Ahb1enrDma1en(val as u8) } - #[doc = "PE interrupt enable"] - pub const fn peie(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; - val != 0 + #[doc = "Ethernet MAC bus interface Clock Enable"] + pub fn set_eth1macen(&mut self, val: super::vals::C1Ahb1enrDma1en) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); } - #[doc = "PE interrupt enable"] - pub fn set_peie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + #[doc = "Ethernet Transmission Clock Enable"] + pub const fn eth1txen(&self) -> super::vals::C1Ahb1enrDma1en { + let val = (self.0 >> 16usize) & 0x01; + super::vals::C1Ahb1enrDma1en(val as u8) } - #[doc = "Parity selection"] - pub const fn ps(&self) -> super::vals::Ps { - let val = (self.0 >> 9usize) & 0x01; - super::vals::Ps(val as u8) + #[doc = "Ethernet Transmission Clock Enable"] + pub fn set_eth1txen(&mut self, val: super::vals::C1Ahb1enrDma1en) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); } - #[doc = "Parity selection"] - pub fn set_ps(&mut self, val: super::vals::Ps) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + #[doc = "Ethernet Reception Clock Enable"] + pub const fn eth1rxen(&self) -> super::vals::C1Ahb1enrDma1en { + let val = (self.0 >> 17usize) & 0x01; + super::vals::C1Ahb1enrDma1en(val as u8) } - #[doc = "Parity control enable"] - pub const fn pce(&self) -> bool { - let val = (self.0 >> 10usize) & 0x01; - val != 0 + #[doc = "Ethernet Reception Clock Enable"] + pub fn set_eth1rxen(&mut self, val: super::vals::C1Ahb1enrDma1en) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); } - #[doc = "Parity control enable"] - pub fn set_pce(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); + #[doc = "USB1OTG Peripheral Clocks Enable"] + pub const fn usb1otgen(&self) -> super::vals::C1Ahb1enrDma1en { + let val = (self.0 >> 25usize) & 0x01; + super::vals::C1Ahb1enrDma1en(val as u8) } - #[doc = "Wakeup method"] - pub const fn wake(&self) -> super::vals::Wake { - let val = (self.0 >> 11usize) & 0x01; - super::vals::Wake(val as u8) + #[doc = "USB1OTG Peripheral Clocks Enable"] + pub fn set_usb1otgen(&mut self, val: super::vals::C1Ahb1enrDma1en) { + self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize); } - #[doc = "Wakeup method"] - pub fn set_wake(&mut self, val: super::vals::Wake) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); + #[doc = "USB_PHY1 Clocks Enable"] + pub const fn usb1ulpien(&self) -> super::vals::C1Ahb1enrDma1en { + let val = (self.0 >> 26usize) & 0x01; + super::vals::C1Ahb1enrDma1en(val as u8) } - #[doc = "Word length"] - pub const fn m(&self) -> super::vals::M { - let val = (self.0 >> 12usize) & 0x01; - super::vals::M(val as u8) + #[doc = "USB_PHY1 Clocks Enable"] + pub fn set_usb1ulpien(&mut self, val: super::vals::C1Ahb1enrDma1en) { + self.0 = (self.0 & !(0x01 << 26usize)) | (((val.0 as u32) & 0x01) << 26usize); } - #[doc = "Word length"] - pub fn set_m(&mut self, val: super::vals::M) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); + #[doc = "USB2OTG Peripheral Clocks Enable"] + pub const fn usb2otgen(&self) -> super::vals::C1Ahb1enrDma1en { + let val = (self.0 >> 27usize) & 0x01; + super::vals::C1Ahb1enrDma1en(val as u8) } - #[doc = "USART enable"] - pub const fn ue(&self) -> bool { - let val = (self.0 >> 13usize) & 0x01; - val != 0 + #[doc = "USB2OTG Peripheral Clocks Enable"] + pub fn set_usb2otgen(&mut self, val: super::vals::C1Ahb1enrDma1en) { + self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize); } - #[doc = "USART enable"] - pub fn set_ue(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); + #[doc = "USB_PHY2 Clocks Enable"] + pub const fn usb2ulpien(&self) -> super::vals::C1Ahb1enrDma1en { + let val = (self.0 >> 28usize) & 0x01; + super::vals::C1Ahb1enrDma1en(val as u8) + } + #[doc = "USB_PHY2 Clocks Enable"] + pub fn set_usb2ulpien(&mut self, val: super::vals::C1Ahb1enrDma1en) { + self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); } } - impl Default for Cr1 { - fn default() -> Cr1 { - Cr1(0) + impl Default for C1Ahb1enr { + fn default() -> C1Ahb1enr { + C1Ahb1enr(0) } } - #[doc = "Control register 2"] + #[doc = "RCC AHB2 Clock Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr2(pub u32); - impl Cr2 { - #[doc = "Address of the USART node"] - pub const fn add(&self) -> u8 { - let val = (self.0 >> 0usize) & 0x0f; - val as u8 + pub struct C1Ahb2enr(pub u32); + impl C1Ahb2enr { + #[doc = "DCMI peripheral clock"] + pub const fn dcmien(&self) -> super::vals::C1Ahb2enrDcmien { + let val = (self.0 >> 0usize) & 0x01; + super::vals::C1Ahb2enrDcmien(val as u8) } - #[doc = "Address of the USART node"] - pub fn set_add(&mut self, val: u8) { - self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize); + #[doc = "DCMI peripheral clock"] + pub fn set_dcmien(&mut self, val: super::vals::C1Ahb2enrDcmien) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "lin break detection length"] - pub const fn lbdl(&self) -> super::vals::Lbdl { + #[doc = "CRYPT peripheral clock enable"] + pub const fn crypten(&self) -> super::vals::C1Ahb2enrDcmien { + let val = (self.0 >> 4usize) & 0x01; + super::vals::C1Ahb2enrDcmien(val as u8) + } + #[doc = "CRYPT peripheral clock enable"] + pub fn set_crypten(&mut self, val: super::vals::C1Ahb2enrDcmien) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + } + #[doc = "HASH peripheral clock enable"] + pub const fn hashen(&self) -> super::vals::C1Ahb2enrDcmien { let val = (self.0 >> 5usize) & 0x01; - super::vals::Lbdl(val as u8) + super::vals::C1Ahb2enrDcmien(val as u8) } - #[doc = "lin break detection length"] - pub fn set_lbdl(&mut self, val: super::vals::Lbdl) { + #[doc = "HASH peripheral clock enable"] + pub fn set_hashen(&mut self, val: super::vals::C1Ahb2enrDcmien) { self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "LIN break detection interrupt enable"] - pub const fn lbdie(&self) -> bool { + #[doc = "RNG peripheral clocks enable"] + pub const fn rngen(&self) -> super::vals::C1Ahb2enrDcmien { let val = (self.0 >> 6usize) & 0x01; - val != 0 - } - #[doc = "LIN break detection interrupt enable"] - pub fn set_lbdie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); - } - #[doc = "STOP bits"] - pub const fn stop(&self) -> super::vals::Stop { - let val = (self.0 >> 12usize) & 0x03; - super::vals::Stop(val as u8) - } - #[doc = "STOP bits"] - pub fn set_stop(&mut self, val: super::vals::Stop) { - self.0 = (self.0 & !(0x03 << 12usize)) | (((val.0 as u32) & 0x03) << 12usize); - } - #[doc = "LIN mode enable"] - pub const fn linen(&self) -> bool { - let val = (self.0 >> 14usize) & 0x01; - val != 0 - } - #[doc = "LIN mode enable"] - pub fn set_linen(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); - } - } - impl Default for Cr2 { - fn default() -> Cr2 { - Cr2(0) + super::vals::C1Ahb2enrDcmien(val as u8) } - } - #[doc = "Guard time and prescaler register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Gtpr(pub u32); - impl Gtpr { - #[doc = "Prescaler value"] - pub const fn psc(&self) -> u8 { - let val = (self.0 >> 0usize) & 0xff; - val as u8 + #[doc = "RNG peripheral clocks enable"] + pub fn set_rngen(&mut self, val: super::vals::C1Ahb2enrDcmien) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); } - #[doc = "Prescaler value"] - pub fn set_psc(&mut self, val: u8) { - self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize); + #[doc = "SDMMC2 and SDMMC2 delay clock enable"] + pub const fn sdmmc2en(&self) -> super::vals::C1Ahb2enrDcmien { + let val = (self.0 >> 9usize) & 0x01; + super::vals::C1Ahb2enrDcmien(val as u8) } - #[doc = "Guard time value"] - pub const fn gt(&self) -> u8 { - let val = (self.0 >> 8usize) & 0xff; - val as u8 + #[doc = "SDMMC2 and SDMMC2 delay clock enable"] + pub fn set_sdmmc2en(&mut self, val: super::vals::C1Ahb2enrDcmien) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); } - #[doc = "Guard time value"] - pub fn set_gt(&mut self, val: u8) { - self.0 = (self.0 & !(0xff << 8usize)) | (((val as u32) & 0xff) << 8usize); + #[doc = "SRAM1 block enable"] + pub const fn sram1en(&self) -> super::vals::C1Ahb2enrDcmien { + let val = (self.0 >> 29usize) & 0x01; + super::vals::C1Ahb2enrDcmien(val as u8) } - } - impl Default for Gtpr { - fn default() -> Gtpr { - Gtpr(0) + #[doc = "SRAM1 block enable"] + pub fn set_sram1en(&mut self, val: super::vals::C1Ahb2enrDcmien) { + self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); + } + #[doc = "SRAM2 block enable"] + pub const fn sram2en(&self) -> super::vals::C1Ahb2enrDcmien { + let val = (self.0 >> 30usize) & 0x01; + super::vals::C1Ahb2enrDcmien(val as u8) + } + #[doc = "SRAM2 block enable"] + pub fn set_sram2en(&mut self, val: super::vals::C1Ahb2enrDcmien) { + self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize); + } + #[doc = "SRAM3 block enable"] + pub const fn sram3en(&self) -> super::vals::C1Ahb2enrDcmien { + let val = (self.0 >> 31usize) & 0x01; + super::vals::C1Ahb2enrDcmien(val as u8) + } + #[doc = "SRAM3 block enable"] + pub fn set_sram3en(&mut self, val: super::vals::C1Ahb2enrDcmien) { + self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); } } - } - pub mod vals { - use crate::generic::*; - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Rwu(pub u8); - impl Rwu { - #[doc = "Receiver in active mode"] - pub const ACTIVE: Self = Self(0); - #[doc = "Receiver in mute mode"] - pub const MUTE: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lbdl(pub u8); - impl Lbdl { - #[doc = "10-bit break detection"] - pub const LBDL10: Self = Self(0); - #[doc = "11-bit break detection"] - pub const LBDL11: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Wake(pub u8); - impl Wake { - #[doc = "USART wakeup on idle line"] - pub const IDLELINE: Self = Self(0); - #[doc = "USART wakeup on address mark"] - pub const ADDRESSMARK: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Cpol(pub u8); - impl Cpol { - #[doc = "Steady low value on CK pin outside transmission window"] - pub const LOW: Self = Self(0); - #[doc = "Steady high value on CK pin outside transmission window"] - pub const HIGH: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Cpha(pub u8); - impl Cpha { - #[doc = "The first clock transition is the first data capture edge"] - pub const FIRST: Self = Self(0); - #[doc = "The second clock transition is the first data capture edge"] - pub const SECOND: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Sbk(pub u8); - impl Sbk { - #[doc = "No break character is transmitted"] - pub const NOBREAK: Self = Self(0); - #[doc = "Break character transmitted"] - pub const BREAK: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct M(pub u8); - impl M { - #[doc = "8 data bits"] - pub const M8: Self = Self(0); - #[doc = "9 data bits"] - pub const M9: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Hdsel(pub u8); - impl Hdsel { - #[doc = "Half duplex mode is not selected"] - pub const FULLDUPLEX: Self = Self(0); - #[doc = "Half duplex mode is selected"] - pub const HALFDUPLEX: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Stop(pub u8); - impl Stop { - #[doc = "1 stop bit"] - pub const STOP1: Self = Self(0); - #[doc = "0.5 stop bits"] - pub const STOP0P5: Self = Self(0x01); - #[doc = "2 stop bits"] - pub const STOP2: Self = Self(0x02); - #[doc = "1.5 stop bits"] - pub const STOP1P5: Self = Self(0x03); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ps(pub u8); - impl Ps { - #[doc = "Even parity"] - pub const EVEN: Self = Self(0); - #[doc = "Odd parity"] - pub const ODD: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Irlp(pub u8); - impl Irlp { - #[doc = "Normal mode"] - pub const NORMAL: Self = Self(0); - #[doc = "Low-power mode"] - pub const LOWPOWER: Self = Self(0x01); - } - } -} -pub mod rng_v1 { - use crate::generic::*; - #[doc = "Random number generator"] - #[derive(Copy, Clone)] - pub struct Rng(pub *mut u8); - unsafe impl Send for Rng {} - unsafe impl Sync for Rng {} - impl Rng { - #[doc = "control register"] - pub fn cr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(0usize)) } - } - #[doc = "status register"] - pub fn sr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(4usize)) } - } - #[doc = "data register"] - pub fn dr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(8usize)) } + impl Default for C1Ahb2enr { + fn default() -> C1Ahb2enr { + C1Ahb2enr(0) + } } - } - pub mod regs { - use crate::generic::*; - #[doc = "status register"] + #[doc = "RCC PLL2 Dividers Configuration Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Sr(pub u32); - impl Sr { - #[doc = "Data ready"] - pub const fn drdy(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; - val != 0 - } - #[doc = "Data ready"] - pub fn set_drdy(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); - } - #[doc = "Clock error current status"] - pub const fn cecs(&self) -> bool { - let val = (self.0 >> 1usize) & 0x01; - val != 0 + pub struct Pll2divr(pub u32); + impl Pll2divr { + #[doc = "Multiplication factor for PLL1 VCO"] + pub const fn divn2(&self) -> u16 { + let val = (self.0 >> 0usize) & 0x01ff; + val as u16 } - #[doc = "Clock error current status"] - pub fn set_cecs(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + #[doc = "Multiplication factor for PLL1 VCO"] + pub fn set_divn2(&mut self, val: u16) { + self.0 = (self.0 & !(0x01ff << 0usize)) | (((val as u32) & 0x01ff) << 0usize); } - #[doc = "Seed error current status"] - pub const fn secs(&self) -> bool { - let val = (self.0 >> 2usize) & 0x01; - val != 0 + #[doc = "PLL1 DIVP division factor"] + pub const fn divp2(&self) -> u8 { + let val = (self.0 >> 9usize) & 0x7f; + val as u8 } - #[doc = "Seed error current status"] - pub fn set_secs(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); + #[doc = "PLL1 DIVP division factor"] + pub fn set_divp2(&mut self, val: u8) { + self.0 = (self.0 & !(0x7f << 9usize)) | (((val as u32) & 0x7f) << 9usize); } - #[doc = "Clock error interrupt status"] - pub const fn ceis(&self) -> bool { - let val = (self.0 >> 5usize) & 0x01; - val != 0 + #[doc = "PLL1 DIVQ division factor"] + pub const fn divq2(&self) -> u8 { + let val = (self.0 >> 16usize) & 0x7f; + val as u8 } - #[doc = "Clock error interrupt status"] - pub fn set_ceis(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); + #[doc = "PLL1 DIVQ division factor"] + pub fn set_divq2(&mut self, val: u8) { + self.0 = (self.0 & !(0x7f << 16usize)) | (((val as u32) & 0x7f) << 16usize); } - #[doc = "Seed error interrupt status"] - pub const fn seis(&self) -> bool { - let val = (self.0 >> 6usize) & 0x01; - val != 0 + #[doc = "PLL1 DIVR division factor"] + pub const fn divr2(&self) -> u8 { + let val = (self.0 >> 24usize) & 0x7f; + val as u8 } - #[doc = "Seed error interrupt status"] - pub fn set_seis(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + #[doc = "PLL1 DIVR division factor"] + pub fn set_divr2(&mut self, val: u8) { + self.0 = (self.0 & !(0x7f << 24usize)) | (((val as u32) & 0x7f) << 24usize); } } - impl Default for Sr { - fn default() -> Sr { - Sr(0) + impl Default for Pll2divr { + fn default() -> Pll2divr { + Pll2divr(0) } } - #[doc = "control register"] + #[doc = "RCC D3 Autonomous mode Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr(pub u32); - impl Cr { - #[doc = "Random number generator enable"] - pub const fn rngen(&self) -> bool { - let val = (self.0 >> 2usize) & 0x01; - val != 0 + pub struct D3amr(pub u32); + impl D3amr { + #[doc = "BDMA and DMAMUX Autonomous mode enable"] + pub const fn bdmaamen(&self) -> super::vals::Bdmaamen { + let val = (self.0 >> 0usize) & 0x01; + super::vals::Bdmaamen(val as u8) } - #[doc = "Random number generator enable"] - pub fn set_rngen(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); + #[doc = "BDMA and DMAMUX Autonomous mode enable"] + pub fn set_bdmaamen(&mut self, val: super::vals::Bdmaamen) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "Interrupt enable"] - pub const fn ie(&self) -> bool { + #[doc = "LPUART1 Autonomous mode enable"] + pub const fn lpuart1amen(&self) -> super::vals::Bdmaamen { let val = (self.0 >> 3usize) & 0x01; - val != 0 + super::vals::Bdmaamen(val as u8) } - #[doc = "Interrupt enable"] - pub fn set_ie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); + #[doc = "LPUART1 Autonomous mode enable"] + pub fn set_lpuart1amen(&mut self, val: super::vals::Bdmaamen) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); + } + #[doc = "SPI6 Autonomous mode enable"] + pub const fn spi6amen(&self) -> super::vals::Bdmaamen { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Bdmaamen(val as u8) + } + #[doc = "SPI6 Autonomous mode enable"] + pub fn set_spi6amen(&mut self, val: super::vals::Bdmaamen) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + } + #[doc = "I2C4 Autonomous mode enable"] + pub const fn i2c4amen(&self) -> super::vals::Bdmaamen { + let val = (self.0 >> 7usize) & 0x01; + super::vals::Bdmaamen(val as u8) + } + #[doc = "I2C4 Autonomous mode enable"] + pub fn set_i2c4amen(&mut self, val: super::vals::Bdmaamen) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); + } + #[doc = "LPTIM2 Autonomous mode enable"] + pub const fn lptim2amen(&self) -> super::vals::Bdmaamen { + let val = (self.0 >> 9usize) & 0x01; + super::vals::Bdmaamen(val as u8) + } + #[doc = "LPTIM2 Autonomous mode enable"] + pub fn set_lptim2amen(&mut self, val: super::vals::Bdmaamen) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + } + #[doc = "LPTIM3 Autonomous mode enable"] + pub const fn lptim3amen(&self) -> super::vals::Bdmaamen { + let val = (self.0 >> 10usize) & 0x01; + super::vals::Bdmaamen(val as u8) + } + #[doc = "LPTIM3 Autonomous mode enable"] + pub fn set_lptim3amen(&mut self, val: super::vals::Bdmaamen) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); + } + #[doc = "LPTIM4 Autonomous mode enable"] + pub const fn lptim4amen(&self) -> super::vals::Bdmaamen { + let val = (self.0 >> 11usize) & 0x01; + super::vals::Bdmaamen(val as u8) + } + #[doc = "LPTIM4 Autonomous mode enable"] + pub fn set_lptim4amen(&mut self, val: super::vals::Bdmaamen) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); + } + #[doc = "LPTIM5 Autonomous mode enable"] + pub const fn lptim5amen(&self) -> super::vals::Bdmaamen { + let val = (self.0 >> 12usize) & 0x01; + super::vals::Bdmaamen(val as u8) + } + #[doc = "LPTIM5 Autonomous mode enable"] + pub fn set_lptim5amen(&mut self, val: super::vals::Bdmaamen) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); + } + #[doc = "COMP12 Autonomous mode enable"] + pub const fn comp12amen(&self) -> super::vals::Bdmaamen { + let val = (self.0 >> 14usize) & 0x01; + super::vals::Bdmaamen(val as u8) + } + #[doc = "COMP12 Autonomous mode enable"] + pub fn set_comp12amen(&mut self, val: super::vals::Bdmaamen) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); + } + #[doc = "VREF Autonomous mode enable"] + pub const fn vrefamen(&self) -> super::vals::Bdmaamen { + let val = (self.0 >> 15usize) & 0x01; + super::vals::Bdmaamen(val as u8) + } + #[doc = "VREF Autonomous mode enable"] + pub fn set_vrefamen(&mut self, val: super::vals::Bdmaamen) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + } + #[doc = "RTC Autonomous mode enable"] + pub const fn rtcamen(&self) -> super::vals::Bdmaamen { + let val = (self.0 >> 16usize) & 0x01; + super::vals::Bdmaamen(val as u8) + } + #[doc = "RTC Autonomous mode enable"] + pub fn set_rtcamen(&mut self, val: super::vals::Bdmaamen) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + } + #[doc = "CRC Autonomous mode enable"] + pub const fn crcamen(&self) -> super::vals::Bdmaamen { + let val = (self.0 >> 19usize) & 0x01; + super::vals::Bdmaamen(val as u8) + } + #[doc = "CRC Autonomous mode enable"] + pub fn set_crcamen(&mut self, val: super::vals::Bdmaamen) { + self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); + } + #[doc = "SAI4 Autonomous mode enable"] + pub const fn sai4amen(&self) -> super::vals::Bdmaamen { + let val = (self.0 >> 21usize) & 0x01; + super::vals::Bdmaamen(val as u8) + } + #[doc = "SAI4 Autonomous mode enable"] + pub fn set_sai4amen(&mut self, val: super::vals::Bdmaamen) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); + } + #[doc = "ADC3 Autonomous mode enable"] + pub const fn adc3amen(&self) -> super::vals::Bdmaamen { + let val = (self.0 >> 24usize) & 0x01; + super::vals::Bdmaamen(val as u8) + } + #[doc = "ADC3 Autonomous mode enable"] + pub fn set_adc3amen(&mut self, val: super::vals::Bdmaamen) { + self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); + } + #[doc = "Backup RAM Autonomous mode enable"] + pub const fn bkpramamen(&self) -> super::vals::Bdmaamen { + let val = (self.0 >> 28usize) & 0x01; + super::vals::Bdmaamen(val as u8) + } + #[doc = "Backup RAM Autonomous mode enable"] + pub fn set_bkpramamen(&mut self, val: super::vals::Bdmaamen) { + self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); + } + #[doc = "SRAM4 Autonomous mode enable"] + pub const fn sram4amen(&self) -> super::vals::Bdmaamen { + let val = (self.0 >> 29usize) & 0x01; + super::vals::Bdmaamen(val as u8) } - } - impl Default for Cr { - fn default() -> Cr { - Cr(0) + #[doc = "SRAM4 Autonomous mode enable"] + pub fn set_sram4amen(&mut self, val: super::vals::Bdmaamen) { + self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); } } - } -} -pub mod generic { - use core::marker::PhantomData; - #[derive(Copy, Clone)] - pub struct RW; - #[derive(Copy, Clone)] - pub struct R; - #[derive(Copy, Clone)] - pub struct W; - mod sealed { - use super::*; - pub trait Access {} - impl Access for R {} - impl Access for W {} - impl Access for RW {} - } - pub trait Access: sealed::Access + Copy {} - impl Access for R {} - impl Access for W {} - impl Access for RW {} - pub trait Read: Access {} - impl Read for RW {} - impl Read for R {} - pub trait Write: Access {} - impl Write for RW {} - impl Write for W {} - #[derive(Copy, Clone)] - pub struct Reg { - ptr: *mut u8, - phantom: PhantomData<*mut (T, A)>, - } - unsafe impl Send for Reg {} - unsafe impl Sync for Reg {} - impl Reg { - pub fn from_ptr(ptr: *mut u8) -> Self { - Self { - ptr, - phantom: PhantomData, + impl Default for D3amr { + fn default() -> D3amr { + D3amr(0) } } - pub fn ptr(&self) -> *mut T { - self.ptr as _ - } - } - impl Reg { - pub unsafe fn read(&self) -> T { - (self.ptr as *mut T).read_volatile() - } - } - impl Reg { - pub unsafe fn write_value(&self, val: T) { - (self.ptr as *mut T).write_volatile(val) - } - } - impl Reg { - pub unsafe fn write(&self, f: impl FnOnce(&mut T) -> R) -> R { - let mut val = Default::default(); - let res = f(&mut val); - self.write_value(val); - res - } - } - impl Reg { - pub unsafe fn modify(&self, f: impl FnOnce(&mut T) -> R) -> R { - let mut val = self.read(); - let res = f(&mut val); - self.write_value(val); - res - } - } -} -pub mod spi_v2 { - use crate::generic::*; - #[doc = "Serial peripheral interface"] - #[derive(Copy, Clone)] - pub struct Spi(pub *mut u8); - unsafe impl Send for Spi {} - unsafe impl Sync for Spi {} - impl Spi { - #[doc = "control register 1"] - pub fn cr1(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(0usize)) } - } - #[doc = "control register 2"] - pub fn cr2(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(4usize)) } - } - #[doc = "status register"] - pub fn sr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(8usize)) } - } - #[doc = "data register"] - pub fn dr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(12usize)) } - } - #[doc = "CRC polynomial register"] - pub fn crcpr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(16usize)) } - } - #[doc = "RX CRC register"] - pub fn rxcrcr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(20usize)) } - } - #[doc = "TX CRC register"] - pub fn txcrcr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(24usize)) } - } - } - pub mod regs { - use crate::generic::*; - #[doc = "control register 1"] + #[doc = "RCC AHB4 Sleep Clock Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr1(pub u32); - impl Cr1 { - #[doc = "Clock phase"] - pub const fn cpha(&self) -> super::vals::Cpha { + pub struct C1Ahb4lpenr(pub u32); + impl C1Ahb4lpenr { + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub const fn gpioalpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { let val = (self.0 >> 0usize) & 0x01; - super::vals::Cpha(val as u8) + super::vals::C1Ahb4lpenrGpioalpen(val as u8) } - #[doc = "Clock phase"] - pub fn set_cpha(&mut self, val: super::vals::Cpha) { + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub fn set_gpioalpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "Clock polarity"] - pub const fn cpol(&self) -> super::vals::Cpol { + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub const fn gpioblpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { let val = (self.0 >> 1usize) & 0x01; - super::vals::Cpol(val as u8) + super::vals::C1Ahb4lpenrGpioalpen(val as u8) } - #[doc = "Clock polarity"] - pub fn set_cpol(&mut self, val: super::vals::Cpol) { + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub fn set_gpioblpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - #[doc = "Master selection"] - pub const fn mstr(&self) -> super::vals::Mstr { + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub const fn gpioclpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { let val = (self.0 >> 2usize) & 0x01; - super::vals::Mstr(val as u8) + super::vals::C1Ahb4lpenrGpioalpen(val as u8) } - #[doc = "Master selection"] - pub fn set_mstr(&mut self, val: super::vals::Mstr) { + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub fn set_gpioclpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); } - #[doc = "Baud rate control"] - pub const fn br(&self) -> super::vals::Br { - let val = (self.0 >> 3usize) & 0x07; - super::vals::Br(val as u8) + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub const fn gpiodlpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { + let val = (self.0 >> 3usize) & 0x01; + super::vals::C1Ahb4lpenrGpioalpen(val as u8) } - #[doc = "Baud rate control"] - pub fn set_br(&mut self, val: super::vals::Br) { - self.0 = (self.0 & !(0x07 << 3usize)) | (((val.0 as u32) & 0x07) << 3usize); + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub fn set_gpiodlpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); } - #[doc = "SPI enable"] - pub const fn spe(&self) -> bool { + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub const fn gpioelpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { + let val = (self.0 >> 4usize) & 0x01; + super::vals::C1Ahb4lpenrGpioalpen(val as u8) + } + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub fn set_gpioelpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + } + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub const fn gpioflpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { + let val = (self.0 >> 5usize) & 0x01; + super::vals::C1Ahb4lpenrGpioalpen(val as u8) + } + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub fn set_gpioflpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + } + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub const fn gpioglpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { let val = (self.0 >> 6usize) & 0x01; - val != 0 + super::vals::C1Ahb4lpenrGpioalpen(val as u8) } - #[doc = "SPI enable"] - pub fn set_spe(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub fn set_gpioglpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); } - #[doc = "Frame format"] - pub const fn lsbfirst(&self) -> super::vals::Lsbfirst { + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub const fn gpiohlpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { let val = (self.0 >> 7usize) & 0x01; - super::vals::Lsbfirst(val as u8) + super::vals::C1Ahb4lpenrGpioalpen(val as u8) } - #[doc = "Frame format"] - pub fn set_lsbfirst(&mut self, val: super::vals::Lsbfirst) { + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub fn set_gpiohlpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); } - #[doc = "Internal slave select"] - pub const fn ssi(&self) -> bool { + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub const fn gpioilpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { let val = (self.0 >> 8usize) & 0x01; - val != 0 + super::vals::C1Ahb4lpenrGpioalpen(val as u8) + } + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub fn set_gpioilpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); + } + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub const fn gpiojlpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { + let val = (self.0 >> 9usize) & 0x01; + super::vals::C1Ahb4lpenrGpioalpen(val as u8) + } + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub fn set_gpiojlpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + } + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub const fn gpioklpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { + let val = (self.0 >> 10usize) & 0x01; + super::vals::C1Ahb4lpenrGpioalpen(val as u8) + } + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub fn set_gpioklpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); + } + #[doc = "CRC peripheral clock enable during CSleep mode"] + pub const fn crclpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { + let val = (self.0 >> 19usize) & 0x01; + super::vals::C1Ahb4lpenrGpioalpen(val as u8) + } + #[doc = "CRC peripheral clock enable during CSleep mode"] + pub fn set_crclpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { + self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); + } + #[doc = "BDMA Clock Enable During CSleep Mode"] + pub const fn bdmalpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { + let val = (self.0 >> 21usize) & 0x01; + super::vals::C1Ahb4lpenrGpioalpen(val as u8) + } + #[doc = "BDMA Clock Enable During CSleep Mode"] + pub fn set_bdmalpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); } - #[doc = "Internal slave select"] - pub fn set_ssi(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + #[doc = "ADC3 Peripheral Clocks Enable During CSleep Mode"] + pub const fn adc3lpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { + let val = (self.0 >> 24usize) & 0x01; + super::vals::C1Ahb4lpenrGpioalpen(val as u8) } - #[doc = "Software slave management"] - pub const fn ssm(&self) -> bool { - let val = (self.0 >> 9usize) & 0x01; - val != 0 + #[doc = "ADC3 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_adc3lpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { + self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); } - #[doc = "Software slave management"] - pub fn set_ssm(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + #[doc = "Backup RAM Clock Enable During CSleep Mode"] + pub const fn bkpramlpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { + let val = (self.0 >> 28usize) & 0x01; + super::vals::C1Ahb4lpenrGpioalpen(val as u8) } - #[doc = "Receive only"] - pub const fn rxonly(&self) -> super::vals::Rxonly { - let val = (self.0 >> 10usize) & 0x01; - super::vals::Rxonly(val as u8) + #[doc = "Backup RAM Clock Enable During CSleep Mode"] + pub fn set_bkpramlpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { + self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); } - #[doc = "Receive only"] - pub fn set_rxonly(&mut self, val: super::vals::Rxonly) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); + #[doc = "SRAM4 Clock Enable During CSleep Mode"] + pub const fn sram4lpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen { + let val = (self.0 >> 29usize) & 0x01; + super::vals::C1Ahb4lpenrGpioalpen(val as u8) } - #[doc = "CRC length"] - pub const fn crcl(&self) -> super::vals::Crcl { - let val = (self.0 >> 11usize) & 0x01; - super::vals::Crcl(val as u8) + #[doc = "SRAM4 Clock Enable During CSleep Mode"] + pub fn set_sram4lpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) { + self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); } - #[doc = "CRC length"] - pub fn set_crcl(&mut self, val: super::vals::Crcl) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); + } + impl Default for C1Ahb4lpenr { + fn default() -> C1Ahb4lpenr { + C1Ahb4lpenr(0) } - #[doc = "CRC transfer next"] - pub const fn crcnext(&self) -> super::vals::Crcnext { - let val = (self.0 >> 12usize) & 0x01; - super::vals::Crcnext(val as u8) + } + #[doc = "RCC AHB1 Sleep Clock Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ahb1lpenr(pub u32); + impl Ahb1lpenr { + #[doc = "DMA1 Clock Enable During CSleep Mode"] + pub const fn dma1lpen(&self) -> super::vals::Ahb1lpenrDma1lpen { + let val = (self.0 >> 0usize) & 0x01; + super::vals::Ahb1lpenrDma1lpen(val as u8) } - #[doc = "CRC transfer next"] - pub fn set_crcnext(&mut self, val: super::vals::Crcnext) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); + #[doc = "DMA1 Clock Enable During CSleep Mode"] + pub fn set_dma1lpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "Hardware CRC calculation enable"] - pub const fn crcen(&self) -> bool { - let val = (self.0 >> 13usize) & 0x01; - val != 0 + #[doc = "DMA2 Clock Enable During CSleep Mode"] + pub const fn dma2lpen(&self) -> super::vals::Ahb1lpenrDma1lpen { + let val = (self.0 >> 1usize) & 0x01; + super::vals::Ahb1lpenrDma1lpen(val as u8) } - #[doc = "Hardware CRC calculation enable"] - pub fn set_crcen(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); + #[doc = "DMA2 Clock Enable During CSleep Mode"] + pub fn set_dma2lpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - #[doc = "Output enable in bidirectional mode"] - pub const fn bidioe(&self) -> super::vals::Bidioe { - let val = (self.0 >> 14usize) & 0x01; - super::vals::Bidioe(val as u8) + #[doc = "ADC1/2 Peripheral Clocks Enable During CSleep Mode"] + pub const fn adc12lpen(&self) -> super::vals::Ahb1lpenrDma1lpen { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Ahb1lpenrDma1lpen(val as u8) } - #[doc = "Output enable in bidirectional mode"] - pub fn set_bidioe(&mut self, val: super::vals::Bidioe) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); + #[doc = "ADC1/2 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_adc12lpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "Bidirectional data mode enable"] - pub const fn bidimode(&self) -> super::vals::Bidimode { + #[doc = "Ethernet MAC bus interface Clock Enable During CSleep Mode"] + pub const fn eth1maclpen(&self) -> super::vals::Ahb1lpenrDma1lpen { let val = (self.0 >> 15usize) & 0x01; - super::vals::Bidimode(val as u8) + super::vals::Ahb1lpenrDma1lpen(val as u8) } - #[doc = "Bidirectional data mode enable"] - pub fn set_bidimode(&mut self, val: super::vals::Bidimode) { + #[doc = "Ethernet MAC bus interface Clock Enable During CSleep Mode"] + pub fn set_eth1maclpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) { self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); } - } - impl Default for Cr1 { - fn default() -> Cr1 { - Cr1(0) + #[doc = "Ethernet Transmission Clock Enable During CSleep Mode"] + pub const fn eth1txlpen(&self) -> super::vals::Ahb1lpenrDma1lpen { + let val = (self.0 >> 16usize) & 0x01; + super::vals::Ahb1lpenrDma1lpen(val as u8) } - } - #[doc = "TX CRC register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Txcrcr(pub u32); - impl Txcrcr { - #[doc = "Tx CRC register"] - pub const fn tx_crc(&self) -> u16 { - let val = (self.0 >> 0usize) & 0xffff; - val as u16 + #[doc = "Ethernet Transmission Clock Enable During CSleep Mode"] + pub fn set_eth1txlpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); } - #[doc = "Tx CRC register"] - pub fn set_tx_crc(&mut self, val: u16) { - self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); + #[doc = "Ethernet Reception Clock Enable During CSleep Mode"] + pub const fn eth1rxlpen(&self) -> super::vals::Ahb1lpenrDma1lpen { + let val = (self.0 >> 17usize) & 0x01; + super::vals::Ahb1lpenrDma1lpen(val as u8) } - } - impl Default for Txcrcr { - fn default() -> Txcrcr { - Txcrcr(0) + #[doc = "Ethernet Reception Clock Enable During CSleep Mode"] + pub fn set_eth1rxlpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); } - } - #[doc = "CRC polynomial register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Crcpr(pub u32); - impl Crcpr { - #[doc = "CRC polynomial register"] - pub const fn crcpoly(&self) -> u16 { - let val = (self.0 >> 0usize) & 0xffff; - val as u16 + #[doc = "USB1OTG peripheral clock enable during CSleep mode"] + pub const fn usb1otglpen(&self) -> super::vals::Ahb1lpenrDma1lpen { + let val = (self.0 >> 25usize) & 0x01; + super::vals::Ahb1lpenrDma1lpen(val as u8) } - #[doc = "CRC polynomial register"] - pub fn set_crcpoly(&mut self, val: u16) { - self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); + #[doc = "USB1OTG peripheral clock enable during CSleep mode"] + pub fn set_usb1otglpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) { + self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize); } - } - impl Default for Crcpr { - fn default() -> Crcpr { - Crcpr(0) + #[doc = "USB_PHY1 clock enable during CSleep mode"] + pub const fn usb1otghsulpilpen(&self) -> super::vals::Ahb1lpenrDma1lpen { + let val = (self.0 >> 26usize) & 0x01; + super::vals::Ahb1lpenrDma1lpen(val as u8) } - } - #[doc = "data register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Dr(pub u32); - impl Dr { - #[doc = "Data register"] - pub const fn dr(&self) -> u16 { - let val = (self.0 >> 0usize) & 0xffff; - val as u16 + #[doc = "USB_PHY1 clock enable during CSleep mode"] + pub fn set_usb1otghsulpilpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) { + self.0 = (self.0 & !(0x01 << 26usize)) | (((val.0 as u32) & 0x01) << 26usize); } - #[doc = "Data register"] - pub fn set_dr(&mut self, val: u16) { - self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); + #[doc = "USB2OTG peripheral clock enable during CSleep mode"] + pub const fn usb2otglpen(&self) -> super::vals::Ahb1lpenrDma1lpen { + let val = (self.0 >> 27usize) & 0x01; + super::vals::Ahb1lpenrDma1lpen(val as u8) + } + #[doc = "USB2OTG peripheral clock enable during CSleep mode"] + pub fn set_usb2otglpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) { + self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize); + } + #[doc = "USB_PHY2 clocks enable during CSleep mode"] + pub const fn usb2otghsulpilpen(&self) -> super::vals::Ahb1lpenrDma1lpen { + let val = (self.0 >> 28usize) & 0x01; + super::vals::Ahb1lpenrDma1lpen(val as u8) + } + #[doc = "USB_PHY2 clocks enable during CSleep mode"] + pub fn set_usb2otghsulpilpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) { + self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); } } - impl Default for Dr { - fn default() -> Dr { - Dr(0) + impl Default for Ahb1lpenr { + fn default() -> Ahb1lpenr { + Ahb1lpenr(0) } } - #[doc = "control register 2"] + #[doc = "RCC APB4 Clock Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr2(pub u32); - impl Cr2 { - #[doc = "Rx buffer DMA enable"] - pub const fn rxdmaen(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; - val != 0 - } - #[doc = "Rx buffer DMA enable"] - pub fn set_rxdmaen(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); - } - #[doc = "Tx buffer DMA enable"] - pub const fn txdmaen(&self) -> bool { + pub struct Apb4enr(pub u32); + impl Apb4enr { + #[doc = "SYSCFG peripheral clock enable"] + pub const fn syscfgen(&self) -> super::vals::Apb4enrSyscfgen { let val = (self.0 >> 1usize) & 0x01; - val != 0 - } - #[doc = "Tx buffer DMA enable"] - pub fn set_txdmaen(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); - } - #[doc = "SS output enable"] - pub const fn ssoe(&self) -> bool { - let val = (self.0 >> 2usize) & 0x01; - val != 0 - } - #[doc = "SS output enable"] - pub fn set_ssoe(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); - } - #[doc = "NSS pulse management"] - pub const fn nssp(&self) -> bool { - let val = (self.0 >> 3usize) & 0x01; - val != 0 + super::vals::Apb4enrSyscfgen(val as u8) } - #[doc = "NSS pulse management"] - pub fn set_nssp(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); + #[doc = "SYSCFG peripheral clock enable"] + pub fn set_syscfgen(&mut self, val: super::vals::Apb4enrSyscfgen) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - #[doc = "Frame format"] - pub const fn frf(&self) -> super::vals::Frf { - let val = (self.0 >> 4usize) & 0x01; - super::vals::Frf(val as u8) + #[doc = "LPUART1 Peripheral Clocks Enable"] + pub const fn lpuart1en(&self) -> super::vals::Apb4enrSyscfgen { + let val = (self.0 >> 3usize) & 0x01; + super::vals::Apb4enrSyscfgen(val as u8) } - #[doc = "Frame format"] - pub fn set_frf(&mut self, val: super::vals::Frf) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + #[doc = "LPUART1 Peripheral Clocks Enable"] + pub fn set_lpuart1en(&mut self, val: super::vals::Apb4enrSyscfgen) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); } - #[doc = "Error interrupt enable"] - pub const fn errie(&self) -> bool { + #[doc = "SPI6 Peripheral Clocks Enable"] + pub const fn spi6en(&self) -> super::vals::Apb4enrSyscfgen { let val = (self.0 >> 5usize) & 0x01; - val != 0 + super::vals::Apb4enrSyscfgen(val as u8) } - #[doc = "Error interrupt enable"] - pub fn set_errie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); + #[doc = "SPI6 Peripheral Clocks Enable"] + pub fn set_spi6en(&mut self, val: super::vals::Apb4enrSyscfgen) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "RX buffer not empty interrupt enable"] - pub const fn rxneie(&self) -> bool { - let val = (self.0 >> 6usize) & 0x01; - val != 0 + #[doc = "I2C4 Peripheral Clocks Enable"] + pub const fn i2c4en(&self) -> super::vals::Apb4enrSyscfgen { + let val = (self.0 >> 7usize) & 0x01; + super::vals::Apb4enrSyscfgen(val as u8) } - #[doc = "RX buffer not empty interrupt enable"] - pub fn set_rxneie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + #[doc = "I2C4 Peripheral Clocks Enable"] + pub fn set_i2c4en(&mut self, val: super::vals::Apb4enrSyscfgen) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); } - #[doc = "Tx buffer empty interrupt enable"] - pub const fn txeie(&self) -> bool { - let val = (self.0 >> 7usize) & 0x01; - val != 0 + #[doc = "LPTIM2 Peripheral Clocks Enable"] + pub const fn lptim2en(&self) -> super::vals::Apb4enrSyscfgen { + let val = (self.0 >> 9usize) & 0x01; + super::vals::Apb4enrSyscfgen(val as u8) } - #[doc = "Tx buffer empty interrupt enable"] - pub fn set_txeie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + #[doc = "LPTIM2 Peripheral Clocks Enable"] + pub fn set_lptim2en(&mut self, val: super::vals::Apb4enrSyscfgen) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); } - #[doc = "Data size"] - pub const fn ds(&self) -> super::vals::Ds { - let val = (self.0 >> 8usize) & 0x0f; - super::vals::Ds(val as u8) + #[doc = "LPTIM3 Peripheral Clocks Enable"] + pub const fn lptim3en(&self) -> super::vals::Apb4enrSyscfgen { + let val = (self.0 >> 10usize) & 0x01; + super::vals::Apb4enrSyscfgen(val as u8) } - #[doc = "Data size"] - pub fn set_ds(&mut self, val: super::vals::Ds) { - self.0 = (self.0 & !(0x0f << 8usize)) | (((val.0 as u32) & 0x0f) << 8usize); + #[doc = "LPTIM3 Peripheral Clocks Enable"] + pub fn set_lptim3en(&mut self, val: super::vals::Apb4enrSyscfgen) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); } - #[doc = "FIFO reception threshold"] - pub const fn frxth(&self) -> super::vals::Frxth { - let val = (self.0 >> 12usize) & 0x01; - super::vals::Frxth(val as u8) + #[doc = "LPTIM4 Peripheral Clocks Enable"] + pub const fn lptim4en(&self) -> super::vals::Apb4enrSyscfgen { + let val = (self.0 >> 11usize) & 0x01; + super::vals::Apb4enrSyscfgen(val as u8) } - #[doc = "FIFO reception threshold"] - pub fn set_frxth(&mut self, val: super::vals::Frxth) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); + #[doc = "LPTIM4 Peripheral Clocks Enable"] + pub fn set_lptim4en(&mut self, val: super::vals::Apb4enrSyscfgen) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); } - #[doc = "Last DMA transfer for reception"] - pub const fn ldma_rx(&self) -> super::vals::LdmaRx { - let val = (self.0 >> 13usize) & 0x01; - super::vals::LdmaRx(val as u8) + #[doc = "LPTIM5 Peripheral Clocks Enable"] + pub const fn lptim5en(&self) -> super::vals::Apb4enrSyscfgen { + let val = (self.0 >> 12usize) & 0x01; + super::vals::Apb4enrSyscfgen(val as u8) } - #[doc = "Last DMA transfer for reception"] - pub fn set_ldma_rx(&mut self, val: super::vals::LdmaRx) { - self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize); + #[doc = "LPTIM5 Peripheral Clocks Enable"] + pub fn set_lptim5en(&mut self, val: super::vals::Apb4enrSyscfgen) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); } - #[doc = "Last DMA transfer for transmission"] - pub const fn ldma_tx(&self) -> super::vals::LdmaTx { + #[doc = "COMP1/2 peripheral clock enable"] + pub const fn comp12en(&self) -> super::vals::Apb4enrSyscfgen { let val = (self.0 >> 14usize) & 0x01; - super::vals::LdmaTx(val as u8) + super::vals::Apb4enrSyscfgen(val as u8) } - #[doc = "Last DMA transfer for transmission"] - pub fn set_ldma_tx(&mut self, val: super::vals::LdmaTx) { + #[doc = "COMP1/2 peripheral clock enable"] + pub fn set_comp12en(&mut self, val: super::vals::Apb4enrSyscfgen) { self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); } + #[doc = "VREF peripheral clock enable"] + pub const fn vrefen(&self) -> super::vals::Apb4enrSyscfgen { + let val = (self.0 >> 15usize) & 0x01; + super::vals::Apb4enrSyscfgen(val as u8) + } + #[doc = "VREF peripheral clock enable"] + pub fn set_vrefen(&mut self, val: super::vals::Apb4enrSyscfgen) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + } + #[doc = "RTC APB Clock Enable"] + pub const fn rtcapben(&self) -> super::vals::Apb4enrSyscfgen { + let val = (self.0 >> 16usize) & 0x01; + super::vals::Apb4enrSyscfgen(val as u8) + } + #[doc = "RTC APB Clock Enable"] + pub fn set_rtcapben(&mut self, val: super::vals::Apb4enrSyscfgen) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + } + #[doc = "SAI4 Peripheral Clocks Enable"] + pub const fn sai4en(&self) -> super::vals::Apb4enrSyscfgen { + let val = (self.0 >> 21usize) & 0x01; + super::vals::Apb4enrSyscfgen(val as u8) + } + #[doc = "SAI4 Peripheral Clocks Enable"] + pub fn set_sai4en(&mut self, val: super::vals::Apb4enrSyscfgen) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); + } } - impl Default for Cr2 { - fn default() -> Cr2 { - Cr2(0) + impl Default for Apb4enr { + fn default() -> Apb4enr { + Apb4enr(0) } } - #[doc = "status register"] + #[doc = "RCC APB2 Sleep Clock Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Sr(pub u32); - impl Sr { - #[doc = "Receive buffer not empty"] - pub const fn rxne(&self) -> bool { + pub struct Apb2lpenr(pub u32); + impl Apb2lpenr { + #[doc = "TIM1 peripheral clock enable during CSleep mode"] + pub const fn tim1lpen(&self) -> super::vals::Apb2lpenrTim1lpen { let val = (self.0 >> 0usize) & 0x01; - val != 0 + super::vals::Apb2lpenrTim1lpen(val as u8) } - #[doc = "Receive buffer not empty"] - pub fn set_rxne(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + #[doc = "TIM1 peripheral clock enable during CSleep mode"] + pub fn set_tim1lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "Transmit buffer empty"] - pub const fn txe(&self) -> bool { + #[doc = "TIM8 peripheral clock enable during CSleep mode"] + pub const fn tim8lpen(&self) -> super::vals::Apb2lpenrTim1lpen { let val = (self.0 >> 1usize) & 0x01; - val != 0 + super::vals::Apb2lpenrTim1lpen(val as u8) } - #[doc = "Transmit buffer empty"] - pub fn set_txe(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + #[doc = "TIM8 peripheral clock enable during CSleep mode"] + pub fn set_tim8lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - #[doc = "CRC error flag"] - pub const fn crcerr(&self) -> bool { + #[doc = "USART1 Peripheral Clocks Enable During CSleep Mode"] + pub const fn usart1lpen(&self) -> super::vals::Apb2lpenrTim1lpen { let val = (self.0 >> 4usize) & 0x01; - val != 0 + super::vals::Apb2lpenrTim1lpen(val as u8) } - #[doc = "CRC error flag"] - pub fn set_crcerr(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); + #[doc = "USART1 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_usart1lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); } - #[doc = "Mode fault"] - pub const fn modf(&self) -> bool { + #[doc = "USART6 Peripheral Clocks Enable During CSleep Mode"] + pub const fn usart6lpen(&self) -> super::vals::Apb2lpenrTim1lpen { let val = (self.0 >> 5usize) & 0x01; - val != 0 + super::vals::Apb2lpenrTim1lpen(val as u8) } - #[doc = "Mode fault"] - pub fn set_modf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); + #[doc = "USART6 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_usart6lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "Overrun flag"] - pub const fn ovr(&self) -> bool { - let val = (self.0 >> 6usize) & 0x01; - val != 0 + #[doc = "SPI1 Peripheral Clocks Enable During CSleep Mode"] + pub const fn spi1lpen(&self) -> super::vals::Apb2lpenrTim1lpen { + let val = (self.0 >> 12usize) & 0x01; + super::vals::Apb2lpenrTim1lpen(val as u8) } - #[doc = "Overrun flag"] - pub fn set_ovr(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + #[doc = "SPI1 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_spi1lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); } - #[doc = "Busy flag"] - pub const fn bsy(&self) -> bool { - let val = (self.0 >> 7usize) & 0x01; - val != 0 + #[doc = "SPI4 Peripheral Clocks Enable During CSleep Mode"] + pub const fn spi4lpen(&self) -> super::vals::Apb2lpenrTim1lpen { + let val = (self.0 >> 13usize) & 0x01; + super::vals::Apb2lpenrTim1lpen(val as u8) } - #[doc = "Busy flag"] - pub fn set_bsy(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + #[doc = "SPI4 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_spi4lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize); } - #[doc = "Frame format error"] - pub const fn fre(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; - val != 0 + #[doc = "TIM15 peripheral clock enable during CSleep mode"] + pub const fn tim15lpen(&self) -> super::vals::Apb2lpenrTim1lpen { + let val = (self.0 >> 16usize) & 0x01; + super::vals::Apb2lpenrTim1lpen(val as u8) + } + #[doc = "TIM15 peripheral clock enable during CSleep mode"] + pub fn set_tim15lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + } + #[doc = "TIM16 peripheral clock enable during CSleep mode"] + pub const fn tim16lpen(&self) -> super::vals::Apb2lpenrTim1lpen { + let val = (self.0 >> 17usize) & 0x01; + super::vals::Apb2lpenrTim1lpen(val as u8) + } + #[doc = "TIM16 peripheral clock enable during CSleep mode"] + pub fn set_tim16lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); + } + #[doc = "TIM17 peripheral clock enable during CSleep mode"] + pub const fn tim17lpen(&self) -> super::vals::Apb2lpenrTim1lpen { + let val = (self.0 >> 18usize) & 0x01; + super::vals::Apb2lpenrTim1lpen(val as u8) + } + #[doc = "TIM17 peripheral clock enable during CSleep mode"] + pub fn set_tim17lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); + } + #[doc = "SPI5 Peripheral Clocks Enable During CSleep Mode"] + pub const fn spi5lpen(&self) -> super::vals::Apb2lpenrTim1lpen { + let val = (self.0 >> 20usize) & 0x01; + super::vals::Apb2lpenrTim1lpen(val as u8) } - #[doc = "Frame format error"] - pub fn set_fre(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + #[doc = "SPI5 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_spi5lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize); } - #[doc = "FIFO reception level"] - pub const fn frlvl(&self) -> u8 { - let val = (self.0 >> 9usize) & 0x03; - val as u8 + #[doc = "SAI1 Peripheral Clocks Enable During CSleep Mode"] + pub const fn sai1lpen(&self) -> super::vals::Apb2lpenrTim1lpen { + let val = (self.0 >> 22usize) & 0x01; + super::vals::Apb2lpenrTim1lpen(val as u8) } - #[doc = "FIFO reception level"] - pub fn set_frlvl(&mut self, val: u8) { - self.0 = (self.0 & !(0x03 << 9usize)) | (((val as u32) & 0x03) << 9usize); + #[doc = "SAI1 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_sai1lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); } - #[doc = "FIFO Transmission Level"] - pub const fn ftlvl(&self) -> u8 { - let val = (self.0 >> 11usize) & 0x03; - val as u8 + #[doc = "SAI2 Peripheral Clocks Enable During CSleep Mode"] + pub const fn sai2lpen(&self) -> super::vals::Apb2lpenrTim1lpen { + let val = (self.0 >> 23usize) & 0x01; + super::vals::Apb2lpenrTim1lpen(val as u8) } - #[doc = "FIFO Transmission Level"] - pub fn set_ftlvl(&mut self, val: u8) { - self.0 = (self.0 & !(0x03 << 11usize)) | (((val as u32) & 0x03) << 11usize); + #[doc = "SAI2 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_sai2lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize); } - } - impl Default for Sr { - fn default() -> Sr { - Sr(0) + #[doc = "SAI3 Peripheral Clocks Enable During CSleep Mode"] + pub const fn sai3lpen(&self) -> super::vals::Apb2lpenrTim1lpen { + let val = (self.0 >> 24usize) & 0x01; + super::vals::Apb2lpenrTim1lpen(val as u8) } - } - #[doc = "RX CRC register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Rxcrcr(pub u32); - impl Rxcrcr { - #[doc = "Rx CRC register"] - pub const fn rx_crc(&self) -> u16 { - let val = (self.0 >> 0usize) & 0xffff; - val as u16 + #[doc = "SAI3 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_sai3lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); } - #[doc = "Rx CRC register"] - pub fn set_rx_crc(&mut self, val: u16) { - self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); + #[doc = "DFSDM1 Peripheral Clocks Enable During CSleep Mode"] + pub const fn dfsdm1lpen(&self) -> super::vals::Apb2lpenrTim1lpen { + let val = (self.0 >> 28usize) & 0x01; + super::vals::Apb2lpenrTim1lpen(val as u8) } - } - impl Default for Rxcrcr { - fn default() -> Rxcrcr { - Rxcrcr(0) + #[doc = "DFSDM1 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_dfsdm1lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); + } + #[doc = "HRTIM peripheral clock enable during CSleep mode"] + pub const fn hrtimlpen(&self) -> super::vals::Apb2lpenrTim1lpen { + let val = (self.0 >> 29usize) & 0x01; + super::vals::Apb2lpenrTim1lpen(val as u8) + } + #[doc = "HRTIM peripheral clock enable during CSleep mode"] + pub fn set_hrtimlpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); } } - } - pub mod vals { - use crate::generic::*; - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Rxonly(pub u8); - impl Rxonly { - #[doc = "Full duplex (Transmit and receive)"] - pub const FULLDUPLEX: Self = Self(0); - #[doc = "Output disabled (Receive-only mode)"] - pub const OUTPUTDISABLED: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Bidimode(pub u8); - impl Bidimode { - #[doc = "2-line unidirectional data mode selected"] - pub const UNIDIRECTIONAL: Self = Self(0); - #[doc = "1-line bidirectional data mode selected"] - pub const BIDIRECTIONAL: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Cpol(pub u8); - impl Cpol { - #[doc = "CK to 0 when idle"] - pub const IDLELOW: Self = Self(0); - #[doc = "CK to 1 when idle"] - pub const IDLEHIGH: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Bidioe(pub u8); - impl Bidioe { - #[doc = "Output disabled (receive-only mode)"] - pub const OUTPUTDISABLED: Self = Self(0); - #[doc = "Output enabled (transmit-only mode)"] - pub const OUTPUTENABLED: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ftlvlr(pub u8); - impl Ftlvlr { - #[doc = "Tx FIFO Empty"] - pub const EMPTY: Self = Self(0); - #[doc = "Tx 1/4 FIFO"] - pub const QUARTER: Self = Self(0x01); - #[doc = "Tx 1/2 FIFO"] - pub const HALF: Self = Self(0x02); - #[doc = "Tx FIFO full"] - pub const FULL: Self = Self(0x03); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct LdmaTx(pub u8); - impl LdmaTx { - #[doc = "Number of data to transfer for transmit is even"] - pub const EVEN: Self = Self(0); - #[doc = "Number of data to transfer for transmit is odd"] - pub const ODD: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Frlvlr(pub u8); - impl Frlvlr { - #[doc = "Rx FIFO Empty"] - pub const EMPTY: Self = Self(0); - #[doc = "Rx 1/4 FIFO"] - pub const QUARTER: Self = Self(0x01); - #[doc = "Rx 1/2 FIFO"] - pub const HALF: Self = Self(0x02); - #[doc = "Rx FIFO full"] - pub const FULL: Self = Self(0x03); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Crcl(pub u8); - impl Crcl { - #[doc = "8-bit CRC length"] - pub const EIGHTBIT: Self = Self(0); - #[doc = "16-bit CRC length"] - pub const SIXTEENBIT: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Frf(pub u8); - impl Frf { - #[doc = "SPI Motorola mode"] - pub const MOTOROLA: Self = Self(0); - #[doc = "SPI TI mode"] - pub const TI: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct LdmaRx(pub u8); - impl LdmaRx { - #[doc = "Number of data to transfer for receive is even"] - pub const EVEN: Self = Self(0); - #[doc = "Number of data to transfer for receive is odd"] - pub const ODD: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Br(pub u8); - impl Br { - #[doc = "f_PCLK / 2"] - pub const DIV2: Self = Self(0); - #[doc = "f_PCLK / 4"] - pub const DIV4: Self = Self(0x01); - #[doc = "f_PCLK / 8"] - pub const DIV8: Self = Self(0x02); - #[doc = "f_PCLK / 16"] - pub const DIV16: Self = Self(0x03); - #[doc = "f_PCLK / 32"] - pub const DIV32: Self = Self(0x04); - #[doc = "f_PCLK / 64"] - pub const DIV64: Self = Self(0x05); - #[doc = "f_PCLK / 128"] - pub const DIV128: Self = Self(0x06); - #[doc = "f_PCLK / 256"] - pub const DIV256: Self = Self(0x07); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lsbfirst(pub u8); - impl Lsbfirst { - #[doc = "Data is transmitted/received with the MSB first"] - pub const MSBFIRST: Self = Self(0); - #[doc = "Data is transmitted/received with the LSB first"] - pub const LSBFIRST: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ds(pub u8); - impl Ds { - #[doc = "4-bit"] - pub const FOURBIT: Self = Self(0x03); - #[doc = "5-bit"] - pub const FIVEBIT: Self = Self(0x04); - #[doc = "6-bit"] - pub const SIXBIT: Self = Self(0x05); - #[doc = "7-bit"] - pub const SEVENBIT: Self = Self(0x06); - #[doc = "8-bit"] - pub const EIGHTBIT: Self = Self(0x07); - #[doc = "9-bit"] - pub const NINEBIT: Self = Self(0x08); - #[doc = "10-bit"] - pub const TENBIT: Self = Self(0x09); - #[doc = "11-bit"] - pub const ELEVENBIT: Self = Self(0x0a); - #[doc = "12-bit"] - pub const TWELVEBIT: Self = Self(0x0b); - #[doc = "13-bit"] - pub const THIRTEENBIT: Self = Self(0x0c); - #[doc = "14-bit"] - pub const FOURTEENBIT: Self = Self(0x0d); - #[doc = "15-bit"] - pub const FIFTEENBIT: Self = Self(0x0e); - #[doc = "16-bit"] - pub const SIXTEENBIT: Self = Self(0x0f); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Cpha(pub u8); - impl Cpha { - #[doc = "The first clock transition is the first data capture edge"] - pub const FIRSTEDGE: Self = Self(0); - #[doc = "The second clock transition is the first data capture edge"] - pub const SECONDEDGE: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Mstr(pub u8); - impl Mstr { - #[doc = "Slave configuration"] - pub const SLAVE: Self = Self(0); - #[doc = "Master configuration"] - pub const MASTER: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Frer(pub u8); - impl Frer { - #[doc = "No frame format error"] - pub const NOERROR: Self = Self(0); - #[doc = "A frame format error occurred"] - pub const ERROR: Self = Self(0x01); + impl Default for Apb2lpenr { + fn default() -> Apb2lpenr { + Apb2lpenr(0) + } } + #[doc = "RCC AHB4 Clock Register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Crcnext(pub u8); - impl Crcnext { - #[doc = "Next transmit value is from Tx buffer"] - pub const TXBUFFER: Self = Self(0); - #[doc = "Next transmit value is from Tx CRC register"] - pub const CRC: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ahb4enr(pub u32); + impl Ahb4enr { + #[doc = "0GPIO peripheral clock enable"] + pub const fn gpioaen(&self) -> super::vals::Ahb4enrGpioaen { + let val = (self.0 >> 0usize) & 0x01; + super::vals::Ahb4enrGpioaen(val as u8) + } + #[doc = "0GPIO peripheral clock enable"] + pub fn set_gpioaen(&mut self, val: super::vals::Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + } + #[doc = "0GPIO peripheral clock enable"] + pub const fn gpioben(&self) -> super::vals::Ahb4enrGpioaen { + let val = (self.0 >> 1usize) & 0x01; + super::vals::Ahb4enrGpioaen(val as u8) + } + #[doc = "0GPIO peripheral clock enable"] + pub fn set_gpioben(&mut self, val: super::vals::Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + } + #[doc = "0GPIO peripheral clock enable"] + pub const fn gpiocen(&self) -> super::vals::Ahb4enrGpioaen { + let val = (self.0 >> 2usize) & 0x01; + super::vals::Ahb4enrGpioaen(val as u8) + } + #[doc = "0GPIO peripheral clock enable"] + pub fn set_gpiocen(&mut self, val: super::vals::Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); + } + #[doc = "0GPIO peripheral clock enable"] + pub const fn gpioden(&self) -> super::vals::Ahb4enrGpioaen { + let val = (self.0 >> 3usize) & 0x01; + super::vals::Ahb4enrGpioaen(val as u8) + } + #[doc = "0GPIO peripheral clock enable"] + pub fn set_gpioden(&mut self, val: super::vals::Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); + } + #[doc = "0GPIO peripheral clock enable"] + pub const fn gpioeen(&self) -> super::vals::Ahb4enrGpioaen { + let val = (self.0 >> 4usize) & 0x01; + super::vals::Ahb4enrGpioaen(val as u8) + } + #[doc = "0GPIO peripheral clock enable"] + pub fn set_gpioeen(&mut self, val: super::vals::Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + } + #[doc = "0GPIO peripheral clock enable"] + pub const fn gpiofen(&self) -> super::vals::Ahb4enrGpioaen { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Ahb4enrGpioaen(val as u8) + } + #[doc = "0GPIO peripheral clock enable"] + pub fn set_gpiofen(&mut self, val: super::vals::Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + } + #[doc = "0GPIO peripheral clock enable"] + pub const fn gpiogen(&self) -> super::vals::Ahb4enrGpioaen { + let val = (self.0 >> 6usize) & 0x01; + super::vals::Ahb4enrGpioaen(val as u8) + } + #[doc = "0GPIO peripheral clock enable"] + pub fn set_gpiogen(&mut self, val: super::vals::Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); + } + #[doc = "0GPIO peripheral clock enable"] + pub const fn gpiohen(&self) -> super::vals::Ahb4enrGpioaen { + let val = (self.0 >> 7usize) & 0x01; + super::vals::Ahb4enrGpioaen(val as u8) + } + #[doc = "0GPIO peripheral clock enable"] + pub fn set_gpiohen(&mut self, val: super::vals::Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); + } + #[doc = "0GPIO peripheral clock enable"] + pub const fn gpioien(&self) -> super::vals::Ahb4enrGpioaen { + let val = (self.0 >> 8usize) & 0x01; + super::vals::Ahb4enrGpioaen(val as u8) + } + #[doc = "0GPIO peripheral clock enable"] + pub fn set_gpioien(&mut self, val: super::vals::Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); + } + #[doc = "0GPIO peripheral clock enable"] + pub const fn gpiojen(&self) -> super::vals::Ahb4enrGpioaen { + let val = (self.0 >> 9usize) & 0x01; + super::vals::Ahb4enrGpioaen(val as u8) + } + #[doc = "0GPIO peripheral clock enable"] + pub fn set_gpiojen(&mut self, val: super::vals::Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + } + #[doc = "0GPIO peripheral clock enable"] + pub const fn gpioken(&self) -> super::vals::Ahb4enrGpioaen { + let val = (self.0 >> 10usize) & 0x01; + super::vals::Ahb4enrGpioaen(val as u8) + } + #[doc = "0GPIO peripheral clock enable"] + pub fn set_gpioken(&mut self, val: super::vals::Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); + } + #[doc = "CRC peripheral clock enable"] + pub const fn crcen(&self) -> super::vals::Ahb4enrGpioaen { + let val = (self.0 >> 19usize) & 0x01; + super::vals::Ahb4enrGpioaen(val as u8) + } + #[doc = "CRC peripheral clock enable"] + pub fn set_crcen(&mut self, val: super::vals::Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); + } + #[doc = "BDMA and DMAMUX2 Clock Enable"] + pub const fn bdmaen(&self) -> super::vals::Ahb4enrGpioaen { + let val = (self.0 >> 21usize) & 0x01; + super::vals::Ahb4enrGpioaen(val as u8) + } + #[doc = "BDMA and DMAMUX2 Clock Enable"] + pub fn set_bdmaen(&mut self, val: super::vals::Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); + } + #[doc = "ADC3 Peripheral Clocks Enable"] + pub const fn adc3en(&self) -> super::vals::Ahb4enrGpioaen { + let val = (self.0 >> 24usize) & 0x01; + super::vals::Ahb4enrGpioaen(val as u8) + } + #[doc = "ADC3 Peripheral Clocks Enable"] + pub fn set_adc3en(&mut self, val: super::vals::Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); + } + #[doc = "HSEM peripheral clock enable"] + pub const fn hsemen(&self) -> super::vals::Ahb4enrGpioaen { + let val = (self.0 >> 25usize) & 0x01; + super::vals::Ahb4enrGpioaen(val as u8) + } + #[doc = "HSEM peripheral clock enable"] + pub fn set_hsemen(&mut self, val: super::vals::Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize); + } + #[doc = "Backup RAM Clock Enable"] + pub const fn bkpramen(&self) -> super::vals::Ahb4enrGpioaen { + let val = (self.0 >> 28usize) & 0x01; + super::vals::Ahb4enrGpioaen(val as u8) + } + #[doc = "Backup RAM Clock Enable"] + pub fn set_bkpramen(&mut self, val: super::vals::Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Frxth(pub u8); - impl Frxth { - #[doc = "RXNE event is generated if the FIFO level is greater than or equal to 1/2 (16-bit)"] - pub const HALF: Self = Self(0); - #[doc = "RXNE event is generated if the FIFO level is greater than or equal to 1/4 (8-bit)"] - pub const QUARTER: Self = Self(0x01); + impl Default for Ahb4enr { + fn default() -> Ahb4enr { + Ahb4enr(0) + } } - } -} -pub mod syscfg_f4 { - use crate::generic::*; - #[doc = "System configuration controller"] - #[derive(Copy, Clone)] - pub struct Syscfg(pub *mut u8); - unsafe impl Send for Syscfg {} - unsafe impl Sync for Syscfg {} - impl Syscfg { - #[doc = "memory remap register"] - pub fn memrm(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(0usize)) } + #[doc = "RCC AHB2 Clock Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ahb2enr(pub u32); + impl Ahb2enr { + #[doc = "DCMI peripheral clock"] + pub const fn dcmien(&self) -> super::vals::Ahb2enrDcmien { + let val = (self.0 >> 0usize) & 0x01; + super::vals::Ahb2enrDcmien(val as u8) + } + #[doc = "DCMI peripheral clock"] + pub fn set_dcmien(&mut self, val: super::vals::Ahb2enrDcmien) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + } + #[doc = "CRYPT peripheral clock enable"] + pub const fn crypten(&self) -> super::vals::Ahb2enrDcmien { + let val = (self.0 >> 4usize) & 0x01; + super::vals::Ahb2enrDcmien(val as u8) + } + #[doc = "CRYPT peripheral clock enable"] + pub fn set_crypten(&mut self, val: super::vals::Ahb2enrDcmien) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + } + #[doc = "HASH peripheral clock enable"] + pub const fn hashen(&self) -> super::vals::Ahb2enrDcmien { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Ahb2enrDcmien(val as u8) + } + #[doc = "HASH peripheral clock enable"] + pub fn set_hashen(&mut self, val: super::vals::Ahb2enrDcmien) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + } + #[doc = "RNG peripheral clocks enable"] + pub const fn rngen(&self) -> super::vals::Ahb2enrDcmien { + let val = (self.0 >> 6usize) & 0x01; + super::vals::Ahb2enrDcmien(val as u8) + } + #[doc = "RNG peripheral clocks enable"] + pub fn set_rngen(&mut self, val: super::vals::Ahb2enrDcmien) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); + } + #[doc = "SDMMC2 and SDMMC2 delay clock enable"] + pub const fn sdmmc2en(&self) -> super::vals::Ahb2enrDcmien { + let val = (self.0 >> 9usize) & 0x01; + super::vals::Ahb2enrDcmien(val as u8) + } + #[doc = "SDMMC2 and SDMMC2 delay clock enable"] + pub fn set_sdmmc2en(&mut self, val: super::vals::Ahb2enrDcmien) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + } + #[doc = "SRAM1 block enable"] + pub const fn sram1en(&self) -> super::vals::Ahb2enrDcmien { + let val = (self.0 >> 29usize) & 0x01; + super::vals::Ahb2enrDcmien(val as u8) + } + #[doc = "SRAM1 block enable"] + pub fn set_sram1en(&mut self, val: super::vals::Ahb2enrDcmien) { + self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); + } + #[doc = "SRAM2 block enable"] + pub const fn sram2en(&self) -> super::vals::Ahb2enrDcmien { + let val = (self.0 >> 30usize) & 0x01; + super::vals::Ahb2enrDcmien(val as u8) + } + #[doc = "SRAM2 block enable"] + pub fn set_sram2en(&mut self, val: super::vals::Ahb2enrDcmien) { + self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize); + } + #[doc = "SRAM3 block enable"] + pub const fn sram3en(&self) -> super::vals::Ahb2enrDcmien { + let val = (self.0 >> 31usize) & 0x01; + super::vals::Ahb2enrDcmien(val as u8) + } + #[doc = "SRAM3 block enable"] + pub fn set_sram3en(&mut self, val: super::vals::Ahb2enrDcmien) { + self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); + } } - #[doc = "peripheral mode configuration register"] - pub fn pmc(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(4usize)) } + impl Default for Ahb2enr { + fn default() -> Ahb2enr { + Ahb2enr(0) + } } - #[doc = "external interrupt configuration register"] - pub fn exticr(self, n: usize) -> Reg { - assert!(n < 4usize); - unsafe { Reg::from_ptr(self.0.add(8usize + n * 4usize)) } + #[doc = "RCC AHB1 Clock Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ahb1enr(pub u32); + impl Ahb1enr { + #[doc = "DMA1 Clock Enable"] + pub const fn dma1en(&self) -> super::vals::Ahb1enrDma1en { + let val = (self.0 >> 0usize) & 0x01; + super::vals::Ahb1enrDma1en(val as u8) + } + #[doc = "DMA1 Clock Enable"] + pub fn set_dma1en(&mut self, val: super::vals::Ahb1enrDma1en) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + } + #[doc = "DMA2 Clock Enable"] + pub const fn dma2en(&self) -> super::vals::Ahb1enrDma1en { + let val = (self.0 >> 1usize) & 0x01; + super::vals::Ahb1enrDma1en(val as u8) + } + #[doc = "DMA2 Clock Enable"] + pub fn set_dma2en(&mut self, val: super::vals::Ahb1enrDma1en) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + } + #[doc = "ADC1/2 Peripheral Clocks Enable"] + pub const fn adc12en(&self) -> super::vals::Ahb1enrDma1en { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Ahb1enrDma1en(val as u8) + } + #[doc = "ADC1/2 Peripheral Clocks Enable"] + pub fn set_adc12en(&mut self, val: super::vals::Ahb1enrDma1en) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + } + #[doc = "Ethernet MAC bus interface Clock Enable"] + pub const fn eth1macen(&self) -> super::vals::Ahb1enrDma1en { + let val = (self.0 >> 15usize) & 0x01; + super::vals::Ahb1enrDma1en(val as u8) + } + #[doc = "Ethernet MAC bus interface Clock Enable"] + pub fn set_eth1macen(&mut self, val: super::vals::Ahb1enrDma1en) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + } + #[doc = "Ethernet Transmission Clock Enable"] + pub const fn eth1txen(&self) -> super::vals::Ahb1enrDma1en { + let val = (self.0 >> 16usize) & 0x01; + super::vals::Ahb1enrDma1en(val as u8) + } + #[doc = "Ethernet Transmission Clock Enable"] + pub fn set_eth1txen(&mut self, val: super::vals::Ahb1enrDma1en) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + } + #[doc = "Ethernet Reception Clock Enable"] + pub const fn eth1rxen(&self) -> super::vals::Ahb1enrDma1en { + let val = (self.0 >> 17usize) & 0x01; + super::vals::Ahb1enrDma1en(val as u8) + } + #[doc = "Ethernet Reception Clock Enable"] + pub fn set_eth1rxen(&mut self, val: super::vals::Ahb1enrDma1en) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); + } + #[doc = "Enable USB_PHY2 clocks"] + pub const fn usb2otghsulpien(&self) -> super::vals::Ahb1enrDma1en { + let val = (self.0 >> 18usize) & 0x01; + super::vals::Ahb1enrDma1en(val as u8) + } + #[doc = "Enable USB_PHY2 clocks"] + pub fn set_usb2otghsulpien(&mut self, val: super::vals::Ahb1enrDma1en) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); + } + #[doc = "USB1OTG Peripheral Clocks Enable"] + pub const fn usb1otgen(&self) -> super::vals::Ahb1enrDma1en { + let val = (self.0 >> 25usize) & 0x01; + super::vals::Ahb1enrDma1en(val as u8) + } + #[doc = "USB1OTG Peripheral Clocks Enable"] + pub fn set_usb1otgen(&mut self, val: super::vals::Ahb1enrDma1en) { + self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize); + } + #[doc = "USB_PHY1 Clocks Enable"] + pub const fn usb1ulpien(&self) -> super::vals::Ahb1enrDma1en { + let val = (self.0 >> 26usize) & 0x01; + super::vals::Ahb1enrDma1en(val as u8) + } + #[doc = "USB_PHY1 Clocks Enable"] + pub fn set_usb1ulpien(&mut self, val: super::vals::Ahb1enrDma1en) { + self.0 = (self.0 & !(0x01 << 26usize)) | (((val.0 as u32) & 0x01) << 26usize); + } + #[doc = "USB2OTG Peripheral Clocks Enable"] + pub const fn usb2otgen(&self) -> super::vals::Ahb1enrDma1en { + let val = (self.0 >> 27usize) & 0x01; + super::vals::Ahb1enrDma1en(val as u8) + } + #[doc = "USB2OTG Peripheral Clocks Enable"] + pub fn set_usb2otgen(&mut self, val: super::vals::Ahb1enrDma1en) { + self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize); + } + #[doc = "USB_PHY2 Clocks Enable"] + pub const fn usb2ulpien(&self) -> super::vals::Ahb1enrDma1en { + let val = (self.0 >> 28usize) & 0x01; + super::vals::Ahb1enrDma1en(val as u8) + } + #[doc = "USB_PHY2 Clocks Enable"] + pub fn set_usb2ulpien(&mut self, val: super::vals::Ahb1enrDma1en) { + self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); + } } - #[doc = "Compensation cell control register"] - pub fn cmpcr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(32usize)) } + impl Default for Ahb1enr { + fn default() -> Ahb1enr { + Ahb1enr(0) + } } - } - pub mod regs { - use crate::generic::*; - #[doc = "memory remap register"] + #[doc = "RCC Clock Source Interrupt Clear Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Memrm(pub u32); - impl Memrm { - #[doc = "Memory mapping selection"] - pub const fn mem_mode(&self) -> u8 { - let val = (self.0 >> 0usize) & 0x07; - val as u8 + pub struct Cicr(pub u32); + impl Cicr { + #[doc = "LSI ready Interrupt Clear"] + pub const fn lsirdyc(&self) -> super::vals::Lsirdyc { + let val = (self.0 >> 0usize) & 0x01; + super::vals::Lsirdyc(val as u8) } - #[doc = "Memory mapping selection"] - pub fn set_mem_mode(&mut self, val: u8) { - self.0 = (self.0 & !(0x07 << 0usize)) | (((val as u32) & 0x07) << 0usize); + #[doc = "LSI ready Interrupt Clear"] + pub fn set_lsirdyc(&mut self, val: super::vals::Lsirdyc) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "Flash bank mode selection"] - pub const fn fb_mode(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; + #[doc = "LSE ready Interrupt Clear"] + pub const fn lserdyc(&self) -> super::vals::Lsirdyc { + let val = (self.0 >> 1usize) & 0x01; + super::vals::Lsirdyc(val as u8) + } + #[doc = "LSE ready Interrupt Clear"] + pub fn set_lserdyc(&mut self, val: super::vals::Lsirdyc) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + } + #[doc = "HSI ready Interrupt Clear"] + pub const fn hsirdyc(&self) -> super::vals::Lsirdyc { + let val = (self.0 >> 2usize) & 0x01; + super::vals::Lsirdyc(val as u8) + } + #[doc = "HSI ready Interrupt Clear"] + pub fn set_hsirdyc(&mut self, val: super::vals::Lsirdyc) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); + } + #[doc = "HSE ready Interrupt Clear"] + pub const fn hserdyc(&self) -> super::vals::Lsirdyc { + let val = (self.0 >> 3usize) & 0x01; + super::vals::Lsirdyc(val as u8) + } + #[doc = "HSE ready Interrupt Clear"] + pub fn set_hserdyc(&mut self, val: super::vals::Lsirdyc) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); + } + #[doc = "CSI ready Interrupt Clear"] + pub const fn hse_ready_interrupt_clear(&self) -> bool { + let val = (self.0 >> 4usize) & 0x01; val != 0 } - #[doc = "Flash bank mode selection"] - pub fn set_fb_mode(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + #[doc = "CSI ready Interrupt Clear"] + pub fn set_hse_ready_interrupt_clear(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); } - #[doc = "FMC memory mapping swap"] - pub const fn swp_fmc(&self) -> u8 { - let val = (self.0 >> 10usize) & 0x03; - val as u8 + #[doc = "RC48 ready Interrupt Clear"] + pub const fn hsi48rdyc(&self) -> super::vals::Lsirdyc { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Lsirdyc(val as u8) + } + #[doc = "RC48 ready Interrupt Clear"] + pub fn set_hsi48rdyc(&mut self, val: super::vals::Lsirdyc) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + } + #[doc = "PLL1 ready Interrupt Clear"] + pub fn pllrdyc(&self, n: usize) -> super::vals::Lsirdyc { + assert!(n < 3usize); + let offs = 6usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; + super::vals::Lsirdyc(val as u8) + } + #[doc = "PLL1 ready Interrupt Clear"] + pub fn set_pllrdyc(&mut self, n: usize, val: super::vals::Lsirdyc) { + assert!(n < 3usize); + let offs = 6usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); + } + #[doc = "LSE clock security system Interrupt Clear"] + pub const fn lsecssc(&self) -> super::vals::Lsirdyc { + let val = (self.0 >> 9usize) & 0x01; + super::vals::Lsirdyc(val as u8) + } + #[doc = "LSE clock security system Interrupt Clear"] + pub fn set_lsecssc(&mut self, val: super::vals::Lsirdyc) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + } + #[doc = "HSE clock security system Interrupt Clear"] + pub const fn hsecssc(&self) -> super::vals::Lsirdyc { + let val = (self.0 >> 10usize) & 0x01; + super::vals::Lsirdyc(val as u8) + } + #[doc = "HSE clock security system Interrupt Clear"] + pub fn set_hsecssc(&mut self, val: super::vals::Lsirdyc) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); + } + } + impl Default for Cicr { + fn default() -> Cicr { + Cicr(0) + } + } + #[doc = "RCC PLL2 Fractional Divider Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Pll2fracr(pub u32); + impl Pll2fracr { + #[doc = "Fractional part of the multiplication factor for PLL VCO"] + pub const fn fracn2(&self) -> u16 { + let val = (self.0 >> 3usize) & 0x1fff; + val as u16 } - #[doc = "FMC memory mapping swap"] - pub fn set_swp_fmc(&mut self, val: u8) { - self.0 = (self.0 & !(0x03 << 10usize)) | (((val as u32) & 0x03) << 10usize); + #[doc = "Fractional part of the multiplication factor for PLL VCO"] + pub fn set_fracn2(&mut self, val: u16) { + self.0 = (self.0 & !(0x1fff << 3usize)) | (((val as u32) & 0x1fff) << 3usize); } } - impl Default for Memrm { - fn default() -> Memrm { - Memrm(0) + impl Default for Pll2fracr { + fn default() -> Pll2fracr { + Pll2fracr(0) } } - #[doc = "Compensation cell control register"] + #[doc = "RCC APB1 Peripheral Reset Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cmpcr(pub u32); - impl Cmpcr { - #[doc = "Compensation cell power-down"] - pub const fn cmp_pd(&self) -> bool { + pub struct Apb1lrstr(pub u32); + impl Apb1lrstr { + #[doc = "TIM block reset"] + pub const fn tim2rst(&self) -> super::vals::Tim2rst { let val = (self.0 >> 0usize) & 0x01; - val != 0 + super::vals::Tim2rst(val as u8) } - #[doc = "Compensation cell power-down"] - pub fn set_cmp_pd(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + #[doc = "TIM block reset"] + pub fn set_tim2rst(&mut self, val: super::vals::Tim2rst) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "READY"] - pub const fn ready(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; - val != 0 + #[doc = "TIM block reset"] + pub const fn tim3rst(&self) -> super::vals::Tim2rst { + let val = (self.0 >> 1usize) & 0x01; + super::vals::Tim2rst(val as u8) } - #[doc = "READY"] - pub fn set_ready(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + #[doc = "TIM block reset"] + pub fn set_tim3rst(&mut self, val: super::vals::Tim2rst) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - } - impl Default for Cmpcr { - fn default() -> Cmpcr { - Cmpcr(0) + #[doc = "TIM block reset"] + pub const fn tim4rst(&self) -> super::vals::Tim2rst { + let val = (self.0 >> 2usize) & 0x01; + super::vals::Tim2rst(val as u8) } - } - #[doc = "external interrupt configuration register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Exticr(pub u32); - impl Exticr { - #[doc = "EXTI x configuration"] - pub fn exti(&self, n: usize) -> u8 { - assert!(n < 4usize); - let offs = 0usize + n * 4usize; - let val = (self.0 >> offs) & 0x0f; - val as u8 + #[doc = "TIM block reset"] + pub fn set_tim4rst(&mut self, val: super::vals::Tim2rst) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); } - #[doc = "EXTI x configuration"] - pub fn set_exti(&mut self, n: usize, val: u8) { - assert!(n < 4usize); - let offs = 0usize + n * 4usize; - self.0 = (self.0 & !(0x0f << offs)) | (((val as u32) & 0x0f) << offs); + #[doc = "TIM block reset"] + pub const fn tim5rst(&self) -> super::vals::Tim2rst { + let val = (self.0 >> 3usize) & 0x01; + super::vals::Tim2rst(val as u8) } - } - impl Default for Exticr { - fn default() -> Exticr { - Exticr(0) + #[doc = "TIM block reset"] + pub fn set_tim5rst(&mut self, val: super::vals::Tim2rst) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); } - } - #[doc = "peripheral mode configuration register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Pmc(pub u32); - impl Pmc { - #[doc = "ADC1DC2"] - pub const fn adc1dc2(&self) -> bool { - let val = (self.0 >> 16usize) & 0x01; - val != 0 + #[doc = "TIM block reset"] + pub const fn tim6rst(&self) -> super::vals::Tim2rst { + let val = (self.0 >> 4usize) & 0x01; + super::vals::Tim2rst(val as u8) } - #[doc = "ADC1DC2"] - pub fn set_adc1dc2(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + #[doc = "TIM block reset"] + pub fn set_tim6rst(&mut self, val: super::vals::Tim2rst) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); } - #[doc = "ADC2DC2"] - pub const fn adc2dc2(&self) -> bool { - let val = (self.0 >> 17usize) & 0x01; - val != 0 + #[doc = "TIM block reset"] + pub const fn tim7rst(&self) -> super::vals::Tim2rst { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Tim2rst(val as u8) } - #[doc = "ADC2DC2"] - pub fn set_adc2dc2(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); + #[doc = "TIM block reset"] + pub fn set_tim7rst(&mut self, val: super::vals::Tim2rst) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "ADC3DC2"] - pub const fn adc3dc2(&self) -> bool { - let val = (self.0 >> 18usize) & 0x01; - val != 0 + #[doc = "TIM block reset"] + pub const fn tim12rst(&self) -> super::vals::Tim2rst { + let val = (self.0 >> 6usize) & 0x01; + super::vals::Tim2rst(val as u8) } - #[doc = "ADC3DC2"] - pub fn set_adc3dc2(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize); + #[doc = "TIM block reset"] + pub fn set_tim12rst(&mut self, val: super::vals::Tim2rst) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); } - #[doc = "Ethernet PHY interface selection"] - pub const fn mii_rmii_sel(&self) -> bool { - let val = (self.0 >> 23usize) & 0x01; - val != 0 + #[doc = "TIM block reset"] + pub const fn tim13rst(&self) -> super::vals::Tim2rst { + let val = (self.0 >> 7usize) & 0x01; + super::vals::Tim2rst(val as u8) } - #[doc = "Ethernet PHY interface selection"] - pub fn set_mii_rmii_sel(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize); + #[doc = "TIM block reset"] + pub fn set_tim13rst(&mut self, val: super::vals::Tim2rst) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); } - } - impl Default for Pmc { - fn default() -> Pmc { - Pmc(0) + #[doc = "TIM block reset"] + pub const fn tim14rst(&self) -> super::vals::Tim2rst { + let val = (self.0 >> 8usize) & 0x01; + super::vals::Tim2rst(val as u8) } - } - } -} -pub mod syscfg_l4 { - use crate::generic::*; - #[doc = "System configuration controller"] - #[derive(Copy, Clone)] - pub struct Syscfg(pub *mut u8); - unsafe impl Send for Syscfg {} - unsafe impl Sync for Syscfg {} - impl Syscfg { - #[doc = "memory remap register"] - pub fn memrmp(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(0usize)) } - } - #[doc = "configuration register 1"] - pub fn cfgr1(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(4usize)) } - } - #[doc = "external interrupt configuration register 1"] - pub fn exticr(self, n: usize) -> Reg { - assert!(n < 4usize); - unsafe { Reg::from_ptr(self.0.add(8usize + n * 4usize)) } - } - #[doc = "SCSR"] - pub fn scsr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(24usize)) } - } - #[doc = "CFGR2"] - pub fn cfgr2(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(28usize)) } - } - #[doc = "SWPR"] - pub fn swpr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(32usize)) } - } - #[doc = "SKR"] - pub fn skr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(36usize)) } - } - } - pub mod regs { - use crate::generic::*; - #[doc = "SKR"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Skr(pub u32); - impl Skr { - #[doc = "SRAM2 write protection key for software erase"] - pub const fn key(&self) -> u8 { - let val = (self.0 >> 0usize) & 0xff; - val as u8 + #[doc = "TIM block reset"] + pub fn set_tim14rst(&mut self, val: super::vals::Tim2rst) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); + } + #[doc = "TIM block reset"] + pub const fn lptim1rst(&self) -> super::vals::Tim2rst { + let val = (self.0 >> 9usize) & 0x01; + super::vals::Tim2rst(val as u8) + } + #[doc = "TIM block reset"] + pub fn set_lptim1rst(&mut self, val: super::vals::Tim2rst) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + } + #[doc = "SPI2 block reset"] + pub const fn spi2rst(&self) -> super::vals::Tim2rst { + let val = (self.0 >> 14usize) & 0x01; + super::vals::Tim2rst(val as u8) + } + #[doc = "SPI2 block reset"] + pub fn set_spi2rst(&mut self, val: super::vals::Tim2rst) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); + } + #[doc = "SPI3 block reset"] + pub const fn spi3rst(&self) -> super::vals::Tim2rst { + let val = (self.0 >> 15usize) & 0x01; + super::vals::Tim2rst(val as u8) + } + #[doc = "SPI3 block reset"] + pub fn set_spi3rst(&mut self, val: super::vals::Tim2rst) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + } + #[doc = "SPDIFRX block reset"] + pub const fn spdifrxrst(&self) -> super::vals::Tim2rst { + let val = (self.0 >> 16usize) & 0x01; + super::vals::Tim2rst(val as u8) + } + #[doc = "SPDIFRX block reset"] + pub fn set_spdifrxrst(&mut self, val: super::vals::Tim2rst) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + } + #[doc = "USART2 block reset"] + pub const fn usart2rst(&self) -> super::vals::Tim2rst { + let val = (self.0 >> 17usize) & 0x01; + super::vals::Tim2rst(val as u8) + } + #[doc = "USART2 block reset"] + pub fn set_usart2rst(&mut self, val: super::vals::Tim2rst) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); + } + #[doc = "USART3 block reset"] + pub const fn usart3rst(&self) -> super::vals::Tim2rst { + let val = (self.0 >> 18usize) & 0x01; + super::vals::Tim2rst(val as u8) } - #[doc = "SRAM2 write protection key for software erase"] - pub fn set_key(&mut self, val: u8) { - self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize); + #[doc = "USART3 block reset"] + pub fn set_usart3rst(&mut self, val: super::vals::Tim2rst) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); } - } - impl Default for Skr { - fn default() -> Skr { - Skr(0) + #[doc = "UART4 block reset"] + pub const fn uart4rst(&self) -> super::vals::Tim2rst { + let val = (self.0 >> 19usize) & 0x01; + super::vals::Tim2rst(val as u8) } - } - #[doc = "memory remap register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Memrmp(pub u32); - impl Memrmp { - #[doc = "Memory mapping selection"] - pub const fn mem_mode(&self) -> u8 { - let val = (self.0 >> 0usize) & 0x07; - val as u8 + #[doc = "UART4 block reset"] + pub fn set_uart4rst(&mut self, val: super::vals::Tim2rst) { + self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); } - #[doc = "Memory mapping selection"] - pub fn set_mem_mode(&mut self, val: u8) { - self.0 = (self.0 & !(0x07 << 0usize)) | (((val as u32) & 0x07) << 0usize); + #[doc = "UART5 block reset"] + pub const fn uart5rst(&self) -> super::vals::Tim2rst { + let val = (self.0 >> 20usize) & 0x01; + super::vals::Tim2rst(val as u8) } - #[doc = "QUADSPI memory mapping swap"] - pub const fn qfs(&self) -> bool { - let val = (self.0 >> 3usize) & 0x01; - val != 0 + #[doc = "UART5 block reset"] + pub fn set_uart5rst(&mut self, val: super::vals::Tim2rst) { + self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize); } - #[doc = "QUADSPI memory mapping swap"] - pub fn set_qfs(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); + #[doc = "I2C1 block reset"] + pub const fn i2c1rst(&self) -> super::vals::Tim2rst { + let val = (self.0 >> 21usize) & 0x01; + super::vals::Tim2rst(val as u8) } - #[doc = "Flash Bank mode selection"] - pub const fn fb_mode(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; - val != 0 + #[doc = "I2C1 block reset"] + pub fn set_i2c1rst(&mut self, val: super::vals::Tim2rst) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); } - #[doc = "Flash Bank mode selection"] - pub fn set_fb_mode(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + #[doc = "I2C2 block reset"] + pub const fn i2c2rst(&self) -> super::vals::Tim2rst { + let val = (self.0 >> 22usize) & 0x01; + super::vals::Tim2rst(val as u8) } - } - impl Default for Memrmp { - fn default() -> Memrmp { - Memrmp(0) + #[doc = "I2C2 block reset"] + pub fn set_i2c2rst(&mut self, val: super::vals::Tim2rst) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); } - } - #[doc = "CFGR2"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cfgr2(pub u32); - impl Cfgr2 { - #[doc = "Cortex LOCKUP (Hardfault) output enable bit"] - pub const fn cll(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; - val != 0 + #[doc = "I2C3 block reset"] + pub const fn i2c3rst(&self) -> super::vals::Tim2rst { + let val = (self.0 >> 23usize) & 0x01; + super::vals::Tim2rst(val as u8) } - #[doc = "Cortex LOCKUP (Hardfault) output enable bit"] - pub fn set_cll(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + #[doc = "I2C3 block reset"] + pub fn set_i2c3rst(&mut self, val: super::vals::Tim2rst) { + self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize); } - #[doc = "SRAM2 parity lock bit"] - pub const fn spl(&self) -> bool { - let val = (self.0 >> 1usize) & 0x01; - val != 0 + #[doc = "HDMI-CEC block reset"] + pub const fn cecrst(&self) -> super::vals::Tim2rst { + let val = (self.0 >> 27usize) & 0x01; + super::vals::Tim2rst(val as u8) } - #[doc = "SRAM2 parity lock bit"] - pub fn set_spl(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + #[doc = "HDMI-CEC block reset"] + pub fn set_cecrst(&mut self, val: super::vals::Tim2rst) { + self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize); } - #[doc = "PVD lock enable bit"] - pub const fn pvdl(&self) -> bool { - let val = (self.0 >> 2usize) & 0x01; - val != 0 + #[doc = "DAC1 and 2 Blocks Reset"] + pub const fn dac12rst(&self) -> super::vals::Tim2rst { + let val = (self.0 >> 29usize) & 0x01; + super::vals::Tim2rst(val as u8) } - #[doc = "PVD lock enable bit"] - pub fn set_pvdl(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); + #[doc = "DAC1 and 2 Blocks Reset"] + pub fn set_dac12rst(&mut self, val: super::vals::Tim2rst) { + self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); } - #[doc = "ECC Lock"] - pub const fn eccl(&self) -> bool { - let val = (self.0 >> 3usize) & 0x01; - val != 0 + #[doc = "UART7 block reset"] + pub const fn uart7rst(&self) -> super::vals::Tim2rst { + let val = (self.0 >> 30usize) & 0x01; + super::vals::Tim2rst(val as u8) } - #[doc = "ECC Lock"] - pub fn set_eccl(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); + #[doc = "UART7 block reset"] + pub fn set_uart7rst(&mut self, val: super::vals::Tim2rst) { + self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize); } - #[doc = "SRAM2 parity error flag"] - pub const fn spf(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; - val != 0 + #[doc = "UART8 block reset"] + pub const fn uart8rst(&self) -> super::vals::Tim2rst { + let val = (self.0 >> 31usize) & 0x01; + super::vals::Tim2rst(val as u8) } - #[doc = "SRAM2 parity error flag"] - pub fn set_spf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + #[doc = "UART8 block reset"] + pub fn set_uart8rst(&mut self, val: super::vals::Tim2rst) { + self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); } } - impl Default for Cfgr2 { - fn default() -> Cfgr2 { - Cfgr2(0) + impl Default for Apb1lrstr { + fn default() -> Apb1lrstr { + Apb1lrstr(0) } } - #[doc = "SCSR"] + #[doc = "RCC APB4 Peripheral Reset Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Scsr(pub u32); - impl Scsr { - #[doc = "SRAM2 Erase"] - pub const fn sram2er(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; - val != 0 + pub struct Apb4rstr(pub u32); + impl Apb4rstr { + #[doc = "SYSCFG block reset"] + pub const fn syscfgrst(&self) -> super::vals::Syscfgrst { + let val = (self.0 >> 1usize) & 0x01; + super::vals::Syscfgrst(val as u8) } - #[doc = "SRAM2 Erase"] - pub fn set_sram2er(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + #[doc = "SYSCFG block reset"] + pub fn set_syscfgrst(&mut self, val: super::vals::Syscfgrst) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - #[doc = "SRAM2 busy by erase operation"] - pub const fn sram2bsy(&self) -> bool { - let val = (self.0 >> 1usize) & 0x01; - val != 0 + #[doc = "LPUART1 block reset"] + pub const fn lpuart1rst(&self) -> super::vals::Syscfgrst { + let val = (self.0 >> 3usize) & 0x01; + super::vals::Syscfgrst(val as u8) } - #[doc = "SRAM2 busy by erase operation"] - pub fn set_sram2bsy(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + #[doc = "LPUART1 block reset"] + pub fn set_lpuart1rst(&mut self, val: super::vals::Syscfgrst) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); } - } - impl Default for Scsr { - fn default() -> Scsr { - Scsr(0) + #[doc = "SPI6 block reset"] + pub const fn spi6rst(&self) -> super::vals::Syscfgrst { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Syscfgrst(val as u8) } - } - #[doc = "external interrupt configuration register 4"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Exticr(pub u32); - impl Exticr { - #[doc = "EXTI12 configuration bits"] - pub fn exti(&self, n: usize) -> u8 { - assert!(n < 4usize); - let offs = 0usize + n * 4usize; - let val = (self.0 >> offs) & 0x0f; - val as u8 + #[doc = "SPI6 block reset"] + pub fn set_spi6rst(&mut self, val: super::vals::Syscfgrst) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "EXTI12 configuration bits"] - pub fn set_exti(&mut self, n: usize, val: u8) { - assert!(n < 4usize); - let offs = 0usize + n * 4usize; - self.0 = (self.0 & !(0x0f << offs)) | (((val as u32) & 0x0f) << offs); + #[doc = "I2C4 block reset"] + pub const fn i2c4rst(&self) -> super::vals::Syscfgrst { + let val = (self.0 >> 7usize) & 0x01; + super::vals::Syscfgrst(val as u8) } - } - impl Default for Exticr { - fn default() -> Exticr { - Exticr(0) + #[doc = "I2C4 block reset"] + pub fn set_i2c4rst(&mut self, val: super::vals::Syscfgrst) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); } - } - #[doc = "SWPR"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Swpr(pub u32); - impl Swpr { - #[doc = "SRAWM2 write protection."] - pub fn pwp(&self, n: usize) -> bool { - assert!(n < 32usize); - let offs = 0usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; - val != 0 + #[doc = "LPTIM2 block reset"] + pub const fn lptim2rst(&self) -> super::vals::Syscfgrst { + let val = (self.0 >> 9usize) & 0x01; + super::vals::Syscfgrst(val as u8) } - #[doc = "SRAWM2 write protection."] - pub fn set_pwp(&mut self, n: usize, val: bool) { - assert!(n < 32usize); - let offs = 0usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + #[doc = "LPTIM2 block reset"] + pub fn set_lptim2rst(&mut self, val: super::vals::Syscfgrst) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); } - } - impl Default for Swpr { - fn default() -> Swpr { - Swpr(0) + #[doc = "LPTIM3 block reset"] + pub const fn lptim3rst(&self) -> super::vals::Syscfgrst { + let val = (self.0 >> 10usize) & 0x01; + super::vals::Syscfgrst(val as u8) } - } - #[doc = "configuration register 1"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cfgr1(pub u32); - impl Cfgr1 { - #[doc = "Firewall disable"] - pub const fn fwdis(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; - val != 0 + #[doc = "LPTIM3 block reset"] + pub fn set_lptim3rst(&mut self, val: super::vals::Syscfgrst) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); } - #[doc = "Firewall disable"] - pub fn set_fwdis(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + #[doc = "LPTIM4 block reset"] + pub const fn lptim4rst(&self) -> super::vals::Syscfgrst { + let val = (self.0 >> 11usize) & 0x01; + super::vals::Syscfgrst(val as u8) } - #[doc = "I/O analog switch voltage booster enable"] - pub const fn boosten(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; - val != 0 + #[doc = "LPTIM4 block reset"] + pub fn set_lptim4rst(&mut self, val: super::vals::Syscfgrst) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); } - #[doc = "I/O analog switch voltage booster enable"] - pub fn set_boosten(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + #[doc = "LPTIM5 block reset"] + pub const fn lptim5rst(&self) -> super::vals::Syscfgrst { + let val = (self.0 >> 12usize) & 0x01; + super::vals::Syscfgrst(val as u8) } - #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB6"] - pub const fn i2c_pb6_fmp(&self) -> bool { - let val = (self.0 >> 16usize) & 0x01; - val != 0 + #[doc = "LPTIM5 block reset"] + pub fn set_lptim5rst(&mut self, val: super::vals::Syscfgrst) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); } - #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB6"] - pub fn set_i2c_pb6_fmp(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + #[doc = "COMP12 Blocks Reset"] + pub const fn comp12rst(&self) -> super::vals::Syscfgrst { + let val = (self.0 >> 14usize) & 0x01; + super::vals::Syscfgrst(val as u8) } - #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB7"] - pub const fn i2c_pb7_fmp(&self) -> bool { - let val = (self.0 >> 17usize) & 0x01; - val != 0 + #[doc = "COMP12 Blocks Reset"] + pub fn set_comp12rst(&mut self, val: super::vals::Syscfgrst) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); } - #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB7"] - pub fn set_i2c_pb7_fmp(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); + #[doc = "VREF block reset"] + pub const fn vrefrst(&self) -> super::vals::Syscfgrst { + let val = (self.0 >> 15usize) & 0x01; + super::vals::Syscfgrst(val as u8) } - #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB8"] - pub const fn i2c_pb8_fmp(&self) -> bool { - let val = (self.0 >> 18usize) & 0x01; - val != 0 + #[doc = "VREF block reset"] + pub fn set_vrefrst(&mut self, val: super::vals::Syscfgrst) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); } - #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB8"] - pub fn set_i2c_pb8_fmp(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize); + #[doc = "SAI4 block reset"] + pub const fn sai4rst(&self) -> super::vals::Syscfgrst { + let val = (self.0 >> 21usize) & 0x01; + super::vals::Syscfgrst(val as u8) } - #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB9"] - pub const fn i2c_pb9_fmp(&self) -> bool { - let val = (self.0 >> 19usize) & 0x01; - val != 0 + #[doc = "SAI4 block reset"] + pub fn set_sai4rst(&mut self, val: super::vals::Syscfgrst) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); } - #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB9"] - pub fn set_i2c_pb9_fmp(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize); + } + impl Default for Apb4rstr { + fn default() -> Apb4rstr { + Apb4rstr(0) } - #[doc = "I2C1 Fast-mode Plus driving capability activation"] - pub const fn i2c1_fmp(&self) -> bool { - let val = (self.0 >> 20usize) & 0x01; - val != 0 + } + #[doc = "RCC PLL1 Dividers Configuration Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Pll1divr(pub u32); + impl Pll1divr { + #[doc = "Multiplication factor for PLL1 VCO"] + pub const fn divn1(&self) -> u16 { + let val = (self.0 >> 0usize) & 0x01ff; + val as u16 } - #[doc = "I2C1 Fast-mode Plus driving capability activation"] - pub fn set_i2c1_fmp(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize); + #[doc = "Multiplication factor for PLL1 VCO"] + pub fn set_divn1(&mut self, val: u16) { + self.0 = (self.0 & !(0x01ff << 0usize)) | (((val as u32) & 0x01ff) << 0usize); } - #[doc = "I2C2 Fast-mode Plus driving capability activation"] - pub const fn i2c2_fmp(&self) -> bool { - let val = (self.0 >> 21usize) & 0x01; - val != 0 + #[doc = "PLL1 DIVP division factor"] + pub const fn divp1(&self) -> super::vals::Divp1 { + let val = (self.0 >> 9usize) & 0x7f; + super::vals::Divp1(val as u8) } - #[doc = "I2C2 Fast-mode Plus driving capability activation"] - pub fn set_i2c2_fmp(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); + #[doc = "PLL1 DIVP division factor"] + pub fn set_divp1(&mut self, val: super::vals::Divp1) { + self.0 = (self.0 & !(0x7f << 9usize)) | (((val.0 as u32) & 0x7f) << 9usize); } - #[doc = "I2C3 Fast-mode Plus driving capability activation"] - pub const fn i2c3_fmp(&self) -> bool { - let val = (self.0 >> 22usize) & 0x01; - val != 0 + #[doc = "PLL1 DIVQ division factor"] + pub const fn divq1(&self) -> u8 { + let val = (self.0 >> 16usize) & 0x7f; + val as u8 } - #[doc = "I2C3 Fast-mode Plus driving capability activation"] - pub fn set_i2c3_fmp(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); + #[doc = "PLL1 DIVQ division factor"] + pub fn set_divq1(&mut self, val: u8) { + self.0 = (self.0 & !(0x7f << 16usize)) | (((val as u32) & 0x7f) << 16usize); } - #[doc = "Floating Point Unit interrupts enable bits"] - pub const fn fpu_ie(&self) -> u8 { - let val = (self.0 >> 26usize) & 0x3f; + #[doc = "PLL1 DIVR division factor"] + pub const fn divr1(&self) -> u8 { + let val = (self.0 >> 24usize) & 0x7f; val as u8 } - #[doc = "Floating Point Unit interrupts enable bits"] - pub fn set_fpu_ie(&mut self, val: u8) { - self.0 = (self.0 & !(0x3f << 26usize)) | (((val as u32) & 0x3f) << 26usize); + #[doc = "PLL1 DIVR division factor"] + pub fn set_divr1(&mut self, val: u8) { + self.0 = (self.0 & !(0x7f << 24usize)) | (((val as u32) & 0x7f) << 24usize); } } - impl Default for Cfgr1 { - fn default() -> Cfgr1 { - Cfgr1(0) + impl Default for Pll1divr { + fn default() -> Pll1divr { + Pll1divr(0) } } - } -} -pub mod pwr_h7 { - use crate::generic::*; - #[doc = "PWR"] - #[derive(Copy, Clone)] - pub struct Pwr(pub *mut u8); - unsafe impl Send for Pwr {} - unsafe impl Sync for Pwr {} - impl Pwr { - #[doc = "PWR control register 1"] - pub fn cr1(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(0usize)) } - } - #[doc = "PWR control status register 1"] - pub fn csr1(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(4usize)) } - } - #[doc = "This register is not reset by wakeup from Standby mode, RESET signal and VDD POR. It is only reset by VSW POR and VSWRST reset. This register shall not be accessed when VSWRST bit in RCC_BDCR register resets the VSW domain.After reset, PWR_CR2 register is write-protected. Prior to modifying its content, the DBP bit in PWR_CR1 register must be set to disable the write protection."] - pub fn cr2(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(8usize)) } - } - #[doc = "Reset only by POR only, not reset by wakeup from Standby mode and RESET pad. The lower byte of this register is written once after POR and shall be written before changing VOS level or ck_sys clock frequency. No limitation applies to the upper bytes.Programming data corresponding to an invalid combination of SDLEVEL, SDEXTHP, SDEN, LDOEN and BYPASS bits (see Table9) will be ignored: data will not be written, the written-once mechanism will lock the register and any further write access will be ignored. The default supply configuration will be kept and the ACTVOSRDY bit in PWR control status register 1 (PWR_CSR1) will go on indicating invalid voltage levels. The system shall be power cycled before writing a new value."] - pub fn cr3(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(12usize)) } - } - #[doc = "This register allows controlling CPU1 power."] - pub fn cpucr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(16usize)) } - } - #[doc = "This register allows controlling D3 domain power.Following reset VOSRDY will be read 1 by software"] - pub fn d3cr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(24usize)) } - } - #[doc = "reset only by system reset, not reset by wakeup from Standby mode5 wait states are required when writing this register (when clearing a WKUPF bit in PWR_WKUPFR, the AHB write access will complete after the WKUPF has been cleared)."] - pub fn wkupcr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(32usize)) } - } - #[doc = "reset only by system reset, not reset by wakeup from Standby mode"] - pub fn wkupfr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(36usize)) } - } - #[doc = "Reset only by system reset, not reset by wakeup from Standby mode"] - pub fn wkupepr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(40usize)) } - } - } - pub mod regs { - use crate::generic::*; - #[doc = "This register is not reset by wakeup from Standby mode, RESET signal and VDD POR. It is only reset by VSW POR and VSWRST reset. This register shall not be accessed when VSWRST bit in RCC_BDCR register resets the VSW domain.After reset, PWR_CR2 register is write-protected. Prior to modifying its content, the DBP bit in PWR_CR1 register must be set to disable the write protection."] + #[doc = "RCC AHB3 Clock Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr2(pub u32); - impl Cr2 { - #[doc = "Backup regulator enable When set, the Backup regulator (used to maintain the backup RAM content in Standby and VBAT modes) is enabled. If BREN is reset, the backup regulator is switched off. The backup RAM can still be used in Run and Stop modes. However, its content will be lost in Standby and VBAT modes. If BREN is set, the application must wait till the Backup Regulator Ready flag (BRRDY) is set to indicate that the data written into the SRAM will be maintained in Standby and VBAT modes."] - pub const fn bren(&self) -> bool { + pub struct C1Ahb3enr(pub u32); + impl C1Ahb3enr { + #[doc = "MDMA Peripheral Clock Enable"] + pub const fn mdmaen(&self) -> super::vals::C1Ahb3enrMdmaen { let val = (self.0 >> 0usize) & 0x01; - val != 0 + super::vals::C1Ahb3enrMdmaen(val as u8) } - #[doc = "Backup regulator enable When set, the Backup regulator (used to maintain the backup RAM content in Standby and VBAT modes) is enabled. If BREN is reset, the backup regulator is switched off. The backup RAM can still be used in Run and Stop modes. However, its content will be lost in Standby and VBAT modes. If BREN is set, the application must wait till the Backup Regulator Ready flag (BRRDY) is set to indicate that the data written into the SRAM will be maintained in Standby and VBAT modes."] - pub fn set_bren(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + #[doc = "MDMA Peripheral Clock Enable"] + pub fn set_mdmaen(&mut self, val: super::vals::C1Ahb3enrMdmaen) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "VBAT and temperature monitoring enable When set, the VBAT supply and temperature monitoring is enabled."] - pub const fn monen(&self) -> bool { + #[doc = "DMA2D Peripheral Clock Enable"] + pub const fn dma2den(&self) -> super::vals::C1Ahb3enrMdmaen { let val = (self.0 >> 4usize) & 0x01; - val != 0 + super::vals::C1Ahb3enrMdmaen(val as u8) } - #[doc = "VBAT and temperature monitoring enable When set, the VBAT supply and temperature monitoring is enabled."] - pub fn set_monen(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); + #[doc = "DMA2D Peripheral Clock Enable"] + pub fn set_dma2den(&mut self, val: super::vals::C1Ahb3enrMdmaen) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); } - #[doc = "Backup regulator ready This bit is set by hardware to indicate that the Backup regulator is ready."] - pub const fn brrdy(&self) -> bool { - let val = (self.0 >> 16usize) & 0x01; - val != 0 + #[doc = "JPGDEC Peripheral Clock Enable"] + pub const fn jpgdecen(&self) -> super::vals::C1Ahb3enrMdmaen { + let val = (self.0 >> 5usize) & 0x01; + super::vals::C1Ahb3enrMdmaen(val as u8) } - #[doc = "Backup regulator ready This bit is set by hardware to indicate that the Backup regulator is ready."] - pub fn set_brrdy(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + #[doc = "JPGDEC Peripheral Clock Enable"] + pub fn set_jpgdecen(&mut self, val: super::vals::C1Ahb3enrMdmaen) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + } + #[doc = "FMC Peripheral Clocks Enable"] + pub const fn fmcen(&self) -> super::vals::C1Ahb3enrMdmaen { + let val = (self.0 >> 12usize) & 0x01; + super::vals::C1Ahb3enrMdmaen(val as u8) } - #[doc = "VBAT level monitoring versus low threshold"] - pub const fn vbatl(&self) -> bool { - let val = (self.0 >> 20usize) & 0x01; - val != 0 + #[doc = "FMC Peripheral Clocks Enable"] + pub fn set_fmcen(&mut self, val: super::vals::C1Ahb3enrMdmaen) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); } - #[doc = "VBAT level monitoring versus low threshold"] - pub fn set_vbatl(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize); + #[doc = "QUADSPI and QUADSPI Delay Clock Enable"] + pub const fn qspien(&self) -> super::vals::C1Ahb3enrMdmaen { + let val = (self.0 >> 14usize) & 0x01; + super::vals::C1Ahb3enrMdmaen(val as u8) } - #[doc = "VBAT level monitoring versus high threshold"] - pub const fn vbath(&self) -> bool { - let val = (self.0 >> 21usize) & 0x01; - val != 0 + #[doc = "QUADSPI and QUADSPI Delay Clock Enable"] + pub fn set_qspien(&mut self, val: super::vals::C1Ahb3enrMdmaen) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); } - #[doc = "VBAT level monitoring versus high threshold"] - pub fn set_vbath(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); + #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable"] + pub const fn sdmmc1en(&self) -> super::vals::C1Ahb3enrMdmaen { + let val = (self.0 >> 16usize) & 0x01; + super::vals::C1Ahb3enrMdmaen(val as u8) } - #[doc = "Temperature level monitoring versus low threshold"] - pub const fn templ(&self) -> bool { - let val = (self.0 >> 22usize) & 0x01; - val != 0 + #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable"] + pub fn set_sdmmc1en(&mut self, val: super::vals::C1Ahb3enrMdmaen) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); } - #[doc = "Temperature level monitoring versus low threshold"] - pub fn set_templ(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); + } + impl Default for C1Ahb3enr { + fn default() -> C1Ahb3enr { + C1Ahb3enr(0) } - #[doc = "Temperature level monitoring versus high threshold"] - pub const fn temph(&self) -> bool { - let val = (self.0 >> 23usize) & 0x01; - val != 0 + } + #[doc = "RCC PLL1 Fractional Divider Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Pll1fracr(pub u32); + impl Pll1fracr { + #[doc = "Fractional part of the multiplication factor for PLL1 VCO"] + pub const fn fracn1(&self) -> u16 { + let val = (self.0 >> 3usize) & 0x1fff; + val as u16 } - #[doc = "Temperature level monitoring versus high threshold"] - pub fn set_temph(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize); + #[doc = "Fractional part of the multiplication factor for PLL1 VCO"] + pub fn set_fracn1(&mut self, val: u16) { + self.0 = (self.0 & !(0x1fff << 3usize)) | (((val as u32) & 0x1fff) << 3usize); } } - impl Default for Cr2 { - fn default() -> Cr2 { - Cr2(0) + impl Default for Pll1fracr { + fn default() -> Pll1fracr { + Pll1fracr(0) } } - #[doc = "Reset only by POR only, not reset by wakeup from Standby mode and RESET pad. The lower byte of this register is written once after POR and shall be written before changing VOS level or ck_sys clock frequency. No limitation applies to the upper bytes.Programming data corresponding to an invalid combination of SDLEVEL, SDEXTHP, SDEN, LDOEN and BYPASS bits (see Table9) will be ignored: data will not be written, the written-once mechanism will lock the register and any further write access will be ignored. The default supply configuration will be kept and the ACTVOSRDY bit in PWR control status register 1 (PWR_CSR1) will go on indicating invalid voltage levels. The system shall be power cycled before writing a new value."] + #[doc = "RCC AHB4 Sleep Clock Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr3(pub u32); - impl Cr3 { - #[doc = "Power management unit bypass"] - pub const fn bypass(&self) -> bool { + pub struct Ahb4lpenr(pub u32); + impl Ahb4lpenr { + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub const fn gpioalpen(&self) -> super::vals::Ahb4lpenrGpioalpen { let val = (self.0 >> 0usize) & 0x01; - val != 0 + super::vals::Ahb4lpenrGpioalpen(val as u8) } - #[doc = "Power management unit bypass"] - pub fn set_bypass(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub fn set_gpioalpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "Low drop-out regulator enable"] - pub const fn ldoen(&self) -> bool { + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub const fn gpioblpen(&self) -> super::vals::Ahb4lpenrGpioalpen { let val = (self.0 >> 1usize) & 0x01; - val != 0 + super::vals::Ahb4lpenrGpioalpen(val as u8) } - #[doc = "Low drop-out regulator enable"] - pub fn set_ldoen(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub fn set_gpioblpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - #[doc = "SD converter Enable"] - pub const fn scuen(&self) -> bool { + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub const fn gpioclpen(&self) -> super::vals::Ahb4lpenrGpioalpen { let val = (self.0 >> 2usize) & 0x01; - val != 0 - } - #[doc = "SD converter Enable"] - pub fn set_scuen(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); + super::vals::Ahb4lpenrGpioalpen(val as u8) } - #[doc = "VBAT charging enable"] - pub const fn vbe(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; - val != 0 + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub fn set_gpioclpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); } - #[doc = "VBAT charging enable"] - pub fn set_vbe(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub const fn gpiodlpen(&self) -> super::vals::Ahb4lpenrGpioalpen { + let val = (self.0 >> 3usize) & 0x01; + super::vals::Ahb4lpenrGpioalpen(val as u8) } - #[doc = "VBAT charging resistor selection"] - pub const fn vbrs(&self) -> bool { - let val = (self.0 >> 9usize) & 0x01; - val != 0 + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub fn set_gpiodlpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); } - #[doc = "VBAT charging resistor selection"] - pub fn set_vbrs(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub const fn gpioelpen(&self) -> super::vals::Ahb4lpenrGpioalpen { + let val = (self.0 >> 4usize) & 0x01; + super::vals::Ahb4lpenrGpioalpen(val as u8) } - #[doc = "VDD33USB voltage level detector enable."] - pub const fn usb33den(&self) -> bool { - let val = (self.0 >> 24usize) & 0x01; - val != 0 + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub fn set_gpioelpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); } - #[doc = "VDD33USB voltage level detector enable."] - pub fn set_usb33den(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize); + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub const fn gpioflpen(&self) -> super::vals::Ahb4lpenrGpioalpen { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Ahb4lpenrGpioalpen(val as u8) } - #[doc = "USB regulator enable."] - pub const fn usbregen(&self) -> bool { - let val = (self.0 >> 25usize) & 0x01; - val != 0 + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub fn set_gpioflpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "USB regulator enable."] - pub fn set_usbregen(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize); + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub const fn gpioglpen(&self) -> super::vals::Ahb4lpenrGpioalpen { + let val = (self.0 >> 6usize) & 0x01; + super::vals::Ahb4lpenrGpioalpen(val as u8) } - #[doc = "USB supply ready."] - pub const fn usb33rdy(&self) -> bool { - let val = (self.0 >> 26usize) & 0x01; - val != 0 + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub fn set_gpioglpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); } - #[doc = "USB supply ready."] - pub fn set_usb33rdy(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub const fn gpiohlpen(&self) -> super::vals::Ahb4lpenrGpioalpen { + let val = (self.0 >> 7usize) & 0x01; + super::vals::Ahb4lpenrGpioalpen(val as u8) } - } - impl Default for Cr3 { - fn default() -> Cr3 { - Cr3(0) + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub fn set_gpiohlpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); } - } - #[doc = "PWR control register 1"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr1(pub u32); - impl Cr1 { - #[doc = "Low-power Deepsleep with SVOS3 (SVOS4 and SVOS5 always use low-power, regardless of the setting of this bit)"] - pub const fn lpds(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; - val != 0 + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub const fn gpioilpen(&self) -> super::vals::Ahb4lpenrGpioalpen { + let val = (self.0 >> 8usize) & 0x01; + super::vals::Ahb4lpenrGpioalpen(val as u8) } - #[doc = "Low-power Deepsleep with SVOS3 (SVOS4 and SVOS5 always use low-power, regardless of the setting of this bit)"] - pub fn set_lpds(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub fn set_gpioilpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); } - #[doc = "Programmable voltage detector enable"] - pub const fn pvde(&self) -> bool { - let val = (self.0 >> 4usize) & 0x01; - val != 0 + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub const fn gpiojlpen(&self) -> super::vals::Ahb4lpenrGpioalpen { + let val = (self.0 >> 9usize) & 0x01; + super::vals::Ahb4lpenrGpioalpen(val as u8) } - #[doc = "Programmable voltage detector enable"] - pub fn set_pvde(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub fn set_gpiojlpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); } - #[doc = "Programmable voltage detector level selection These bits select the voltage threshold detected by the PVD. Note: Refer to Section Electrical characteristics of the product datasheet for more details."] - pub const fn pls(&self) -> u8 { - let val = (self.0 >> 5usize) & 0x07; - val as u8 + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub const fn gpioklpen(&self) -> super::vals::Ahb4lpenrGpioalpen { + let val = (self.0 >> 10usize) & 0x01; + super::vals::Ahb4lpenrGpioalpen(val as u8) } - #[doc = "Programmable voltage detector level selection These bits select the voltage threshold detected by the PVD. Note: Refer to Section Electrical characteristics of the product datasheet for more details."] - pub fn set_pls(&mut self, val: u8) { - self.0 = (self.0 & !(0x07 << 5usize)) | (((val as u32) & 0x07) << 5usize); + #[doc = "GPIO peripheral clock enable during CSleep mode"] + pub fn set_gpioklpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); } - #[doc = "Disable backup domain write protection In reset state, the RCC_BDCR register, the RTC registers (including the backup registers), BREN and MOEN bits in PWR_CR2 register, are protected against parasitic write access. This bit must be set to enable write access to these registers."] - pub const fn dbp(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; - val != 0 + #[doc = "CRC peripheral clock enable during CSleep mode"] + pub const fn crclpen(&self) -> super::vals::Ahb4lpenrGpioalpen { + let val = (self.0 >> 19usize) & 0x01; + super::vals::Ahb4lpenrGpioalpen(val as u8) } - #[doc = "Disable backup domain write protection In reset state, the RCC_BDCR register, the RTC registers (including the backup registers), BREN and MOEN bits in PWR_CR2 register, are protected against parasitic write access. This bit must be set to enable write access to these registers."] - pub fn set_dbp(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + #[doc = "CRC peripheral clock enable during CSleep mode"] + pub fn set_crclpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { + self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); } - #[doc = "Flash low-power mode in DStop mode This bit allows to obtain the best trade-off between low-power consumption and restart time when exiting from DStop mode. When it is set, the Flash memory enters low-power mode when D1 domain is in DStop mode."] - pub const fn flps(&self) -> bool { - let val = (self.0 >> 9usize) & 0x01; - val != 0 + #[doc = "BDMA Clock Enable During CSleep Mode"] + pub const fn bdmalpen(&self) -> super::vals::Ahb4lpenrGpioalpen { + let val = (self.0 >> 21usize) & 0x01; + super::vals::Ahb4lpenrGpioalpen(val as u8) } - #[doc = "Flash low-power mode in DStop mode This bit allows to obtain the best trade-off between low-power consumption and restart time when exiting from DStop mode. When it is set, the Flash memory enters low-power mode when D1 domain is in DStop mode."] - pub fn set_flps(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + #[doc = "BDMA Clock Enable During CSleep Mode"] + pub fn set_bdmalpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); } - #[doc = "System Stop mode voltage scaling selection These bits control the VCORE voltage level in system Stop mode, to obtain the best trade-off between power consumption and performance."] - pub const fn svos(&self) -> u8 { - let val = (self.0 >> 14usize) & 0x03; - val as u8 + #[doc = "ADC3 Peripheral Clocks Enable During CSleep Mode"] + pub const fn adc3lpen(&self) -> super::vals::Ahb4lpenrGpioalpen { + let val = (self.0 >> 24usize) & 0x01; + super::vals::Ahb4lpenrGpioalpen(val as u8) } - #[doc = "System Stop mode voltage scaling selection These bits control the VCORE voltage level in system Stop mode, to obtain the best trade-off between power consumption and performance."] - pub fn set_svos(&mut self, val: u8) { - self.0 = (self.0 & !(0x03 << 14usize)) | (((val as u32) & 0x03) << 14usize); + #[doc = "ADC3 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_adc3lpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { + self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); } - #[doc = "Peripheral voltage monitor on VDDA enable"] - pub const fn avden(&self) -> bool { - let val = (self.0 >> 16usize) & 0x01; - val != 0 + #[doc = "Backup RAM Clock Enable During CSleep Mode"] + pub const fn bkpramlpen(&self) -> super::vals::Ahb4lpenrGpioalpen { + let val = (self.0 >> 28usize) & 0x01; + super::vals::Ahb4lpenrGpioalpen(val as u8) } - #[doc = "Peripheral voltage monitor on VDDA enable"] - pub fn set_avden(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + #[doc = "Backup RAM Clock Enable During CSleep Mode"] + pub fn set_bkpramlpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { + self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); } - #[doc = "Analog voltage detector level selection These bits select the voltage threshold detected by the AVD."] - pub const fn als(&self) -> u8 { - let val = (self.0 >> 17usize) & 0x03; - val as u8 + #[doc = "SRAM4 Clock Enable During CSleep Mode"] + pub const fn sram4lpen(&self) -> super::vals::Ahb4lpenrGpioalpen { + let val = (self.0 >> 29usize) & 0x01; + super::vals::Ahb4lpenrGpioalpen(val as u8) } - #[doc = "Analog voltage detector level selection These bits select the voltage threshold detected by the AVD."] - pub fn set_als(&mut self, val: u8) { - self.0 = (self.0 & !(0x03 << 17usize)) | (((val as u32) & 0x03) << 17usize); + #[doc = "SRAM4 Clock Enable During CSleep Mode"] + pub fn set_sram4lpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) { + self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); } } - impl Default for Cr1 { - fn default() -> Cr1 { - Cr1(0) + impl Default for Ahb4lpenr { + fn default() -> Ahb4lpenr { + Ahb4lpenr(0) } } - #[doc = "reset only by system reset, not reset by wakeup from Standby mode5 wait states are required when writing this register (when clearing a WKUPF bit in PWR_WKUPFR, the AHB write access will complete after the WKUPF has been cleared)."] + #[doc = "RCC APB1 Clock Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Wkupcr(pub u32); - impl Wkupcr { - #[doc = "Clear Wakeup pin flag for WKUP. These bits are always read as 0."] - pub const fn wkupc(&self) -> u8 { - let val = (self.0 >> 0usize) & 0x3f; - val as u8 + pub struct Apb1henr(pub u32); + impl Apb1henr { + #[doc = "Clock Recovery System peripheral clock enable"] + pub const fn crsen(&self) -> super::vals::Apb1henrCrsen { + let val = (self.0 >> 1usize) & 0x01; + super::vals::Apb1henrCrsen(val as u8) } - #[doc = "Clear Wakeup pin flag for WKUP. These bits are always read as 0."] - pub fn set_wkupc(&mut self, val: u8) { - self.0 = (self.0 & !(0x3f << 0usize)) | (((val as u32) & 0x3f) << 0usize); + #[doc = "Clock Recovery System peripheral clock enable"] + pub fn set_crsen(&mut self, val: super::vals::Apb1henrCrsen) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - } - impl Default for Wkupcr { - fn default() -> Wkupcr { - Wkupcr(0) + #[doc = "SWPMI Peripheral Clocks Enable"] + pub const fn swpen(&self) -> super::vals::Apb1henrCrsen { + let val = (self.0 >> 2usize) & 0x01; + super::vals::Apb1henrCrsen(val as u8) } - } - #[doc = "This register allows controlling D3 domain power.Following reset VOSRDY will be read 1 by software"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct D3cr(pub u32); - impl D3cr { - #[doc = "VOS Ready bit for VCORE voltage scaling output selection. This bit is set to 1 by hardware when Bypass mode is selected in PWR control register 3 (PWR_CR3)."] - pub const fn vosrdy(&self) -> bool { - let val = (self.0 >> 13usize) & 0x01; - val != 0 + #[doc = "SWPMI Peripheral Clocks Enable"] + pub fn set_swpen(&mut self, val: super::vals::Apb1henrCrsen) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); } - #[doc = "VOS Ready bit for VCORE voltage scaling output selection. This bit is set to 1 by hardware when Bypass mode is selected in PWR control register 3 (PWR_CR3)."] - pub fn set_vosrdy(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); + #[doc = "OPAMP peripheral clock enable"] + pub const fn opampen(&self) -> super::vals::Apb1henrCrsen { + let val = (self.0 >> 4usize) & 0x01; + super::vals::Apb1henrCrsen(val as u8) } - #[doc = "Voltage scaling selection according to performance These bits control the VCORE voltage level and allow to obtains the best trade-off between power consumption and performance: When increasing the performance, the voltage scaling shall be changed before increasing the system frequency. When decreasing performance, the system frequency shall first be decreased before changing the voltage scaling."] - pub const fn vos(&self) -> u8 { - let val = (self.0 >> 14usize) & 0x03; - val as u8 + #[doc = "OPAMP peripheral clock enable"] + pub fn set_opampen(&mut self, val: super::vals::Apb1henrCrsen) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); } - #[doc = "Voltage scaling selection according to performance These bits control the VCORE voltage level and allow to obtains the best trade-off between power consumption and performance: When increasing the performance, the voltage scaling shall be changed before increasing the system frequency. When decreasing performance, the system frequency shall first be decreased before changing the voltage scaling."] - pub fn set_vos(&mut self, val: u8) { - self.0 = (self.0 & !(0x03 << 14usize)) | (((val as u32) & 0x03) << 14usize); + #[doc = "MDIOS peripheral clock enable"] + pub const fn mdiosen(&self) -> super::vals::Apb1henrCrsen { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Apb1henrCrsen(val as u8) + } + #[doc = "MDIOS peripheral clock enable"] + pub fn set_mdiosen(&mut self, val: super::vals::Apb1henrCrsen) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + } + #[doc = "FDCAN Peripheral Clocks Enable"] + pub const fn fdcanen(&self) -> super::vals::Apb1henrCrsen { + let val = (self.0 >> 8usize) & 0x01; + super::vals::Apb1henrCrsen(val as u8) + } + #[doc = "FDCAN Peripheral Clocks Enable"] + pub fn set_fdcanen(&mut self, val: super::vals::Apb1henrCrsen) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); } } - impl Default for D3cr { - fn default() -> D3cr { - D3cr(0) + impl Default for Apb1henr { + fn default() -> Apb1henr { + Apb1henr(0) } } - #[doc = "This register allows controlling CPU1 power."] + #[doc = "RCC APB2 Sleep Clock Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cpucr(pub u32); - impl Cpucr { - #[doc = "D1 domain Power Down Deepsleep selection. This bit allows CPU1 to define the Deepsleep mode for D1 domain."] - pub const fn pdds_d1(&self) -> bool { + pub struct C1Apb2lpenr(pub u32); + impl C1Apb2lpenr { + #[doc = "TIM1 peripheral clock enable during CSleep mode"] + pub const fn tim1lpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { let val = (self.0 >> 0usize) & 0x01; - val != 0 + super::vals::C1Apb2lpenrTim1lpen(val as u8) } - #[doc = "D1 domain Power Down Deepsleep selection. This bit allows CPU1 to define the Deepsleep mode for D1 domain."] - pub fn set_pdds_d1(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + #[doc = "TIM1 peripheral clock enable during CSleep mode"] + pub fn set_tim1lpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "D2 domain Power Down Deepsleep. This bit allows CPU1 to define the Deepsleep mode for D2 domain."] - pub const fn pdds_d2(&self) -> bool { + #[doc = "TIM8 peripheral clock enable during CSleep mode"] + pub const fn tim8lpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { let val = (self.0 >> 1usize) & 0x01; - val != 0 + super::vals::C1Apb2lpenrTim1lpen(val as u8) } - #[doc = "D2 domain Power Down Deepsleep. This bit allows CPU1 to define the Deepsleep mode for D2 domain."] - pub fn set_pdds_d2(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + #[doc = "TIM8 peripheral clock enable during CSleep mode"] + pub fn set_tim8lpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - #[doc = "System D3 domain Power Down Deepsleep. This bit allows CPU1 to define the Deepsleep mode for System D3 domain."] - pub const fn pdds_d3(&self) -> bool { - let val = (self.0 >> 2usize) & 0x01; - val != 0 + #[doc = "USART1 Peripheral Clocks Enable During CSleep Mode"] + pub const fn usart1lpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { + let val = (self.0 >> 4usize) & 0x01; + super::vals::C1Apb2lpenrTim1lpen(val as u8) } - #[doc = "System D3 domain Power Down Deepsleep. This bit allows CPU1 to define the Deepsleep mode for System D3 domain."] - pub fn set_pdds_d3(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); + #[doc = "USART1 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_usart1lpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); } - #[doc = "STOP flag This bit is set by hardware and cleared only by any reset or by setting the CPU1 CSSF bit."] - pub const fn stopf(&self) -> bool { + #[doc = "USART6 Peripheral Clocks Enable During CSleep Mode"] + pub const fn usart6lpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { let val = (self.0 >> 5usize) & 0x01; - val != 0 + super::vals::C1Apb2lpenrTim1lpen(val as u8) } - #[doc = "STOP flag This bit is set by hardware and cleared only by any reset or by setting the CPU1 CSSF bit."] - pub fn set_stopf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); + #[doc = "USART6 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_usart6lpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "System Standby flag This bit is set by hardware and cleared only by a POR (Power-on Reset) or by setting the CPU1 CSSF bit"] - pub const fn sbf(&self) -> bool { - let val = (self.0 >> 6usize) & 0x01; - val != 0 + #[doc = "SPI1 Peripheral Clocks Enable During CSleep Mode"] + pub const fn spi1lpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { + let val = (self.0 >> 12usize) & 0x01; + super::vals::C1Apb2lpenrTim1lpen(val as u8) } - #[doc = "System Standby flag This bit is set by hardware and cleared only by a POR (Power-on Reset) or by setting the CPU1 CSSF bit"] - pub fn set_sbf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + #[doc = "SPI1 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_spi1lpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); + } + #[doc = "SPI4 Peripheral Clocks Enable During CSleep Mode"] + pub const fn spi4lpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { + let val = (self.0 >> 13usize) & 0x01; + super::vals::C1Apb2lpenrTim1lpen(val as u8) + } + #[doc = "SPI4 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_spi4lpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize); + } + #[doc = "TIM15 peripheral clock enable during CSleep mode"] + pub const fn tim15lpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { + let val = (self.0 >> 16usize) & 0x01; + super::vals::C1Apb2lpenrTim1lpen(val as u8) + } + #[doc = "TIM15 peripheral clock enable during CSleep mode"] + pub fn set_tim15lpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + } + #[doc = "TIM16 peripheral clock enable during CSleep mode"] + pub const fn tim16lpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { + let val = (self.0 >> 17usize) & 0x01; + super::vals::C1Apb2lpenrTim1lpen(val as u8) + } + #[doc = "TIM16 peripheral clock enable during CSleep mode"] + pub fn set_tim16lpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); + } + #[doc = "TIM17 peripheral clock enable during CSleep mode"] + pub const fn tim17lpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { + let val = (self.0 >> 18usize) & 0x01; + super::vals::C1Apb2lpenrTim1lpen(val as u8) + } + #[doc = "TIM17 peripheral clock enable during CSleep mode"] + pub fn set_tim17lpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); + } + #[doc = "SPI5 Peripheral Clocks Enable During CSleep Mode"] + pub const fn spi5lpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { + let val = (self.0 >> 20usize) & 0x01; + super::vals::C1Apb2lpenrTim1lpen(val as u8) + } + #[doc = "SPI5 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_spi5lpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize); + } + #[doc = "SAI1 Peripheral Clocks Enable During CSleep Mode"] + pub const fn sai1lpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { + let val = (self.0 >> 22usize) & 0x01; + super::vals::C1Apb2lpenrTim1lpen(val as u8) } - #[doc = "D1 domain DStandby flag This bit is set by hardware and cleared by any system reset or by setting the CPU1 CSSF bit. Once set, this bit can be cleared only when the D1 domain is no longer in DStandby mode."] - pub const fn sbf_d1(&self) -> bool { - let val = (self.0 >> 7usize) & 0x01; - val != 0 + #[doc = "SAI1 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_sai1lpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); } - #[doc = "D1 domain DStandby flag This bit is set by hardware and cleared by any system reset or by setting the CPU1 CSSF bit. Once set, this bit can be cleared only when the D1 domain is no longer in DStandby mode."] - pub fn set_sbf_d1(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + #[doc = "SAI2 Peripheral Clocks Enable During CSleep Mode"] + pub const fn sai2lpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { + let val = (self.0 >> 23usize) & 0x01; + super::vals::C1Apb2lpenrTim1lpen(val as u8) } - #[doc = "D2 domain DStandby flag This bit is set by hardware and cleared by any system reset or by setting the CPU1 CSSF bit. Once set, this bit can be cleared only when the D2 domain is no longer in DStandby mode."] - pub const fn sbf_d2(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; - val != 0 + #[doc = "SAI2 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_sai2lpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize); } - #[doc = "D2 domain DStandby flag This bit is set by hardware and cleared by any system reset or by setting the CPU1 CSSF bit. Once set, this bit can be cleared only when the D2 domain is no longer in DStandby mode."] - pub fn set_sbf_d2(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + #[doc = "SAI3 Peripheral Clocks Enable During CSleep Mode"] + pub const fn sai3lpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { + let val = (self.0 >> 24usize) & 0x01; + super::vals::C1Apb2lpenrTim1lpen(val as u8) } - #[doc = "Clear D1 domain CPU1 Standby, Stop and HOLD flags (always read as 0) This bit is cleared to 0 by hardware."] - pub const fn cssf(&self) -> bool { - let val = (self.0 >> 9usize) & 0x01; - val != 0 + #[doc = "SAI3 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_sai3lpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); } - #[doc = "Clear D1 domain CPU1 Standby, Stop and HOLD flags (always read as 0) This bit is cleared to 0 by hardware."] - pub fn set_cssf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + #[doc = "DFSDM1 Peripheral Clocks Enable During CSleep Mode"] + pub const fn dfsdm1lpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { + let val = (self.0 >> 28usize) & 0x01; + super::vals::C1Apb2lpenrTim1lpen(val as u8) } - #[doc = "Keep system D3 domain in Run mode regardless of the CPU sub-systems modes"] - pub const fn run_d3(&self) -> bool { - let val = (self.0 >> 11usize) & 0x01; - val != 0 + #[doc = "DFSDM1 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_dfsdm1lpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); } - #[doc = "Keep system D3 domain in Run mode regardless of the CPU sub-systems modes"] - pub fn set_run_d3(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); + #[doc = "HRTIM peripheral clock enable during CSleep mode"] + pub const fn hrtimlpen(&self) -> super::vals::C1Apb2lpenrTim1lpen { + let val = (self.0 >> 29usize) & 0x01; + super::vals::C1Apb2lpenrTim1lpen(val as u8) + } + #[doc = "HRTIM peripheral clock enable during CSleep mode"] + pub fn set_hrtimlpen(&mut self, val: super::vals::C1Apb2lpenrTim1lpen) { + self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); } } - impl Default for Cpucr { - fn default() -> Cpucr { - Cpucr(0) + impl Default for C1Apb2lpenr { + fn default() -> C1Apb2lpenr { + C1Apb2lpenr(0) } } - #[doc = "reset only by system reset, not reset by wakeup from Standby mode"] + #[doc = "RCC AHB3 Clock Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Wkupfr(pub u32); - impl Wkupfr { - #[doc = "Wakeup pin WKUPF flag. This bit is set by hardware and cleared only by a Reset pin or by setting the WKUPCn+1 bit in the PWR wakeup clear register (PWR_WKUPCR)."] - pub fn wkupf(&self, n: usize) -> bool { - assert!(n < 6usize); - let offs = 0usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; - val != 0 + pub struct Ahb3enr(pub u32); + impl Ahb3enr { + #[doc = "MDMA Peripheral Clock Enable"] + pub const fn mdmaen(&self) -> super::vals::Ahb3enrMdmaen { + let val = (self.0 >> 0usize) & 0x01; + super::vals::Ahb3enrMdmaen(val as u8) } - #[doc = "Wakeup pin WKUPF flag. This bit is set by hardware and cleared only by a Reset pin or by setting the WKUPCn+1 bit in the PWR wakeup clear register (PWR_WKUPCR)."] - pub fn set_wkupf(&mut self, n: usize, val: bool) { - assert!(n < 6usize); - let offs = 0usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + #[doc = "MDMA Peripheral Clock Enable"] + pub fn set_mdmaen(&mut self, val: super::vals::Ahb3enrMdmaen) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - } - impl Default for Wkupfr { - fn default() -> Wkupfr { - Wkupfr(0) + #[doc = "DMA2D Peripheral Clock Enable"] + pub const fn dma2den(&self) -> super::vals::Ahb3enrMdmaen { + let val = (self.0 >> 4usize) & 0x01; + super::vals::Ahb3enrMdmaen(val as u8) } - } - #[doc = "Reset only by system reset, not reset by wakeup from Standby mode"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Wkupepr(pub u32); - impl Wkupepr { - #[doc = "Enable Wakeup Pin WKUPn+1 Each bit is set and cleared by software. Note: An additional wakeup event is detected if WKUPn+1 pin is enabled (by setting the WKUPENn+1 bit) when WKUPn+1 pin level is already high when WKUPPn+1 selects rising edge, or low when WKUPPn+1 selects falling edge."] - pub fn wkupen(&self, n: usize) -> bool { - assert!(n < 6usize); - let offs = 0usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; - val != 0 + #[doc = "DMA2D Peripheral Clock Enable"] + pub fn set_dma2den(&mut self, val: super::vals::Ahb3enrMdmaen) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); } - #[doc = "Enable Wakeup Pin WKUPn+1 Each bit is set and cleared by software. Note: An additional wakeup event is detected if WKUPn+1 pin is enabled (by setting the WKUPENn+1 bit) when WKUPn+1 pin level is already high when WKUPPn+1 selects rising edge, or low when WKUPPn+1 selects falling edge."] - pub fn set_wkupen(&mut self, n: usize, val: bool) { - assert!(n < 6usize); - let offs = 0usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + #[doc = "JPGDEC Peripheral Clock Enable"] + pub const fn jpgdecen(&self) -> super::vals::Ahb3enrMdmaen { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Ahb3enrMdmaen(val as u8) } - #[doc = "Wakeup pin polarity bit for WKUPn-7 These bits define the polarity used for event detection on WKUPn-7 external wakeup pin."] - pub fn wkupp(&self, n: usize) -> bool { - assert!(n < 6usize); - let offs = 8usize + n * 1usize; - let val = (self.0 >> offs) & 0x01; - val != 0 + #[doc = "JPGDEC Peripheral Clock Enable"] + pub fn set_jpgdecen(&mut self, val: super::vals::Ahb3enrMdmaen) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "Wakeup pin polarity bit for WKUPn-7 These bits define the polarity used for event detection on WKUPn-7 external wakeup pin."] - pub fn set_wkupp(&mut self, n: usize, val: bool) { - assert!(n < 6usize); - let offs = 8usize + n * 1usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + #[doc = "FMC Peripheral Clocks Enable"] + pub const fn fmcen(&self) -> super::vals::Ahb3enrMdmaen { + let val = (self.0 >> 12usize) & 0x01; + super::vals::Ahb3enrMdmaen(val as u8) } - #[doc = "Wakeup pin pull configuration"] - pub fn wkuppupd(&self, n: usize) -> u8 { - assert!(n < 6usize); - let offs = 16usize + n * 2usize; - let val = (self.0 >> offs) & 0x03; - val as u8 + #[doc = "FMC Peripheral Clocks Enable"] + pub fn set_fmcen(&mut self, val: super::vals::Ahb3enrMdmaen) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); } - #[doc = "Wakeup pin pull configuration"] - pub fn set_wkuppupd(&mut self, n: usize, val: u8) { - assert!(n < 6usize); - let offs = 16usize + n * 2usize; - self.0 = (self.0 & !(0x03 << offs)) | (((val as u32) & 0x03) << offs); + #[doc = "QUADSPI and QUADSPI Delay Clock Enable"] + pub const fn qspien(&self) -> super::vals::Ahb3enrMdmaen { + let val = (self.0 >> 14usize) & 0x01; + super::vals::Ahb3enrMdmaen(val as u8) + } + #[doc = "QUADSPI and QUADSPI Delay Clock Enable"] + pub fn set_qspien(&mut self, val: super::vals::Ahb3enrMdmaen) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); + } + #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable"] + pub const fn sdmmc1en(&self) -> super::vals::Ahb3enrMdmaen { + let val = (self.0 >> 16usize) & 0x01; + super::vals::Ahb3enrMdmaen(val as u8) + } + #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable"] + pub fn set_sdmmc1en(&mut self, val: super::vals::Ahb3enrMdmaen) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); } } - impl Default for Wkupepr { - fn default() -> Wkupepr { - Wkupepr(0) + impl Default for Ahb3enr { + fn default() -> Ahb3enr { + Ahb3enr(0) } } - #[doc = "PWR control status register 1"] + #[doc = "RCC Domain 2 Kernel Clock Configuration Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Csr1(pub u32); - impl Csr1 { - #[doc = "Programmable voltage detect output This bit is set and cleared by hardware. It is valid only if the PVD has been enabled by the PVDE bit. Note: since the PVD is disabled in Standby mode, this bit is equal to 0 after Standby or reset until the PVDE bit is set."] - pub const fn pvdo(&self) -> bool { - let val = (self.0 >> 4usize) & 0x01; - val != 0 + pub struct D2ccip2r(pub u32); + impl D2ccip2r { + #[doc = "USART2/3, UART4,5, 7/8 (APB1) kernel clock source selection"] + pub const fn usart234578sel(&self) -> super::vals::Usart234578sel { + let val = (self.0 >> 0usize) & 0x07; + super::vals::Usart234578sel(val as u8) } - #[doc = "Programmable voltage detect output This bit is set and cleared by hardware. It is valid only if the PVD has been enabled by the PVDE bit. Note: since the PVD is disabled in Standby mode, this bit is equal to 0 after Standby or reset until the PVDE bit is set."] - pub fn set_pvdo(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); + #[doc = "USART2/3, UART4,5, 7/8 (APB1) kernel clock source selection"] + pub fn set_usart234578sel(&mut self, val: super::vals::Usart234578sel) { + self.0 = (self.0 & !(0x07 << 0usize)) | (((val.0 as u32) & 0x07) << 0usize); } - #[doc = "Voltage levels ready bit for currently used VOS and SDLEVEL This bit is set to 1 by hardware when the voltage regulator and the SD converter are both disabled and Bypass mode is selected in PWR control register 3 (PWR_CR3)."] - pub const fn actvosrdy(&self) -> bool { - let val = (self.0 >> 13usize) & 0x01; - val != 0 + #[doc = "USART1 and 6 kernel clock source selection"] + pub const fn usart16sel(&self) -> super::vals::Usart16sel { + let val = (self.0 >> 3usize) & 0x07; + super::vals::Usart16sel(val as u8) } - #[doc = "Voltage levels ready bit for currently used VOS and SDLEVEL This bit is set to 1 by hardware when the voltage regulator and the SD converter are both disabled and Bypass mode is selected in PWR control register 3 (PWR_CR3)."] - pub fn set_actvosrdy(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); + #[doc = "USART1 and 6 kernel clock source selection"] + pub fn set_usart16sel(&mut self, val: super::vals::Usart16sel) { + self.0 = (self.0 & !(0x07 << 3usize)) | (((val.0 as u32) & 0x07) << 3usize); } - #[doc = "VOS currently applied for VCORE voltage scaling selection. These bits reflect the last VOS value applied to the PMU."] - pub const fn actvos(&self) -> u8 { - let val = (self.0 >> 14usize) & 0x03; - val as u8 + #[doc = "RNG kernel clock source selection"] + pub const fn rngsel(&self) -> super::vals::Rngsel { + let val = (self.0 >> 8usize) & 0x03; + super::vals::Rngsel(val as u8) } - #[doc = "VOS currently applied for VCORE voltage scaling selection. These bits reflect the last VOS value applied to the PMU."] - pub fn set_actvos(&mut self, val: u8) { - self.0 = (self.0 & !(0x03 << 14usize)) | (((val as u32) & 0x03) << 14usize); + #[doc = "RNG kernel clock source selection"] + pub fn set_rngsel(&mut self, val: super::vals::Rngsel) { + self.0 = (self.0 & !(0x03 << 8usize)) | (((val.0 as u32) & 0x03) << 8usize); } - #[doc = "Analog voltage detector output on VDDA This bit is set and cleared by hardware. It is valid only if AVD on VDDA is enabled by the AVDEN bit. Note: Since the AVD is disabled in Standby mode, this bit is equal to 0 after Standby or reset until the AVDEN bit is set."] - pub const fn avdo(&self) -> bool { - let val = (self.0 >> 16usize) & 0x01; - val != 0 + #[doc = "I2C1,2,3 kernel clock source selection"] + pub const fn i2c123sel(&self) -> super::vals::I2c123sel { + let val = (self.0 >> 12usize) & 0x03; + super::vals::I2c123sel(val as u8) + } + #[doc = "I2C1,2,3 kernel clock source selection"] + pub fn set_i2c123sel(&mut self, val: super::vals::I2c123sel) { + self.0 = (self.0 & !(0x03 << 12usize)) | (((val.0 as u32) & 0x03) << 12usize); + } + #[doc = "USBOTG 1 and 2 kernel clock source selection"] + pub const fn usbsel(&self) -> super::vals::Usbsel { + let val = (self.0 >> 20usize) & 0x03; + super::vals::Usbsel(val as u8) + } + #[doc = "USBOTG 1 and 2 kernel clock source selection"] + pub fn set_usbsel(&mut self, val: super::vals::Usbsel) { + self.0 = (self.0 & !(0x03 << 20usize)) | (((val.0 as u32) & 0x03) << 20usize); + } + #[doc = "HDMI-CEC kernel clock source selection"] + pub const fn cecsel(&self) -> super::vals::Cecsel { + let val = (self.0 >> 22usize) & 0x03; + super::vals::Cecsel(val as u8) + } + #[doc = "HDMI-CEC kernel clock source selection"] + pub fn set_cecsel(&mut self, val: super::vals::Cecsel) { + self.0 = (self.0 & !(0x03 << 22usize)) | (((val.0 as u32) & 0x03) << 22usize); + } + #[doc = "LPTIM1 kernel clock source selection"] + pub const fn lptim1sel(&self) -> super::vals::Lptim1sel { + let val = (self.0 >> 28usize) & 0x07; + super::vals::Lptim1sel(val as u8) } - #[doc = "Analog voltage detector output on VDDA This bit is set and cleared by hardware. It is valid only if AVD on VDDA is enabled by the AVDEN bit. Note: Since the AVD is disabled in Standby mode, this bit is equal to 0 after Standby or reset until the AVDEN bit is set."] - pub fn set_avdo(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + #[doc = "LPTIM1 kernel clock source selection"] + pub fn set_lptim1sel(&mut self, val: super::vals::Lptim1sel) { + self.0 = (self.0 & !(0x07 << 28usize)) | (((val.0 as u32) & 0x07) << 28usize); } } - impl Default for Csr1 { - fn default() -> Csr1 { - Csr1(0) + impl Default for D2ccip2r { + fn default() -> D2ccip2r { + D2ccip2r(0) } } - } -} -pub mod flash_h7 { - use crate::generic::*; - #[doc = "Flash"] - #[derive(Copy, Clone)] - pub struct Flash(pub *mut u8); - unsafe impl Send for Flash {} - unsafe impl Sync for Flash {} - impl Flash { - #[doc = "Access control register"] - pub fn acr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(0usize)) } - } - #[doc = "Cluster BANK%s, containing KEYR?, CR?, SR?, CCR?, PRAR_CUR?, PRAR_PRG?, SCAR_CUR?, SCAR_PRG?, WPSN_CUR?R, WPSN_PRG?R, CRCCR?, CRCSADD?R, CRCEADD?R, ECC_FA?R"] - pub fn bank(self, n: usize) -> Bank { - assert!(n < 2usize); - unsafe { Bank(self.0.add(4usize + n * 256usize)) } - } - #[doc = "FLASH option key register"] - pub fn optkeyr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(8usize)) } - } - #[doc = "FLASH option control register"] - pub fn optcr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(24usize)) } - } - #[doc = "FLASH option status register"] - pub fn optsr_cur(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(28usize)) } - } - #[doc = "FLASH option status register"] - pub fn optsr_prg(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(32usize)) } - } - #[doc = "FLASH option clear control register"] - pub fn optccr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(36usize)) } - } - #[doc = "FLASH register with boot address"] - pub fn boot_curr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(64usize)) } - } - #[doc = "FLASH register with boot address"] - pub fn boot_prgr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(68usize)) } - } - #[doc = "FLASH CRC data register"] - pub fn crcdatar(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(92usize)) } - } - } - #[doc = "Cluster BANK%s, containing KEYR?, CR?, SR?, CCR?, PRAR_CUR?, PRAR_PRG?, SCAR_CUR?, SCAR_PRG?, WPSN_CUR?R, WPSN_PRG?R, CRCCR?, CRCSADD?R, CRCEADD?R, ECC_FA?R"] - #[derive(Copy, Clone)] - pub struct Bank(pub *mut u8); - unsafe impl Send for Bank {} - unsafe impl Sync for Bank {} - impl Bank { - #[doc = "FLASH key register for bank 1"] - pub fn keyr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(0usize)) } - } - #[doc = "FLASH control register for bank 1"] - pub fn cr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(8usize)) } - } - #[doc = "FLASH status register for bank 1"] - pub fn sr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(12usize)) } - } - #[doc = "FLASH clear control register for bank 1"] - pub fn ccr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(16usize)) } - } - #[doc = "FLASH protection address for bank 1"] - pub fn prar_cur(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(36usize)) } - } - #[doc = "FLASH protection address for bank 1"] - pub fn prar_prg(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(40usize)) } - } - #[doc = "FLASH secure address for bank 1"] - pub fn scar_cur(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(44usize)) } - } - #[doc = "FLASH secure address for bank 1"] - pub fn scar_prg(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(48usize)) } - } - #[doc = "FLASH write sector protection for bank 1"] - pub fn wpsn_curr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(52usize)) } - } - #[doc = "FLASH write sector protection for bank 1"] - pub fn wpsn_prgr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(56usize)) } - } - #[doc = "FLASH CRC control register for bank 1"] - pub fn crccr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(76usize)) } - } - #[doc = "FLASH CRC start address register for bank 1"] - pub fn crcsaddr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(80usize)) } - } - #[doc = "FLASH CRC end address register for bank 1"] - pub fn crceaddr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(84usize)) } + #[doc = "RCC PLL3 Fractional Divider Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Pll3fracr(pub u32); + impl Pll3fracr { + #[doc = "Fractional part of the multiplication factor for PLL3 VCO"] + pub const fn fracn3(&self) -> u16 { + let val = (self.0 >> 3usize) & 0x1fff; + val as u16 + } + #[doc = "Fractional part of the multiplication factor for PLL3 VCO"] + pub fn set_fracn3(&mut self, val: u16) { + self.0 = (self.0 & !(0x1fff << 3usize)) | (((val as u32) & 0x1fff) << 3usize); + } } - #[doc = "FLASH ECC fail address for bank 1"] - pub fn far(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(92usize)) } + impl Default for Pll3fracr { + fn default() -> Pll3fracr { + Pll3fracr(0) + } } - } - pub mod regs { - use crate::generic::*; - #[doc = "FLASH status register for bank 1"] + #[doc = "RCC AHB2 Sleep Clock Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Sr(pub u32); - impl Sr { - #[doc = "Bank 1 ongoing program flag"] - pub const fn bsy(&self) -> bool { + pub struct C1Ahb2lpenr(pub u32); + impl C1Ahb2lpenr { + #[doc = "DCMI peripheral clock enable during csleep mode"] + pub const fn dcmilpen(&self) -> super::vals::C1Ahb2lpenrDcmilpen { let val = (self.0 >> 0usize) & 0x01; - val != 0 - } - #[doc = "Bank 1 ongoing program flag"] - pub fn set_bsy(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + super::vals::C1Ahb2lpenrDcmilpen(val as u8) } - #[doc = "Bank 1 write buffer not empty flag"] - pub const fn wbne(&self) -> bool { - let val = (self.0 >> 1usize) & 0x01; - val != 0 + #[doc = "DCMI peripheral clock enable during csleep mode"] + pub fn set_dcmilpen(&mut self, val: super::vals::C1Ahb2lpenrDcmilpen) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "Bank 1 write buffer not empty flag"] - pub fn set_wbne(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + #[doc = "CRYPT peripheral clock enable during CSleep mode"] + pub const fn cryptlpen(&self) -> super::vals::C1Ahb2lpenrDcmilpen { + let val = (self.0 >> 4usize) & 0x01; + super::vals::C1Ahb2lpenrDcmilpen(val as u8) } - #[doc = "Bank 1 wait queue flag"] - pub const fn qw(&self) -> bool { - let val = (self.0 >> 2usize) & 0x01; - val != 0 + #[doc = "CRYPT peripheral clock enable during CSleep mode"] + pub fn set_cryptlpen(&mut self, val: super::vals::C1Ahb2lpenrDcmilpen) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); } - #[doc = "Bank 1 wait queue flag"] - pub fn set_qw(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); + #[doc = "HASH peripheral clock enable during CSleep mode"] + pub const fn hashlpen(&self) -> super::vals::C1Ahb2lpenrDcmilpen { + let val = (self.0 >> 5usize) & 0x01; + super::vals::C1Ahb2lpenrDcmilpen(val as u8) } - #[doc = "Bank 1 CRC busy flag"] - pub const fn crc_busy(&self) -> bool { - let val = (self.0 >> 3usize) & 0x01; - val != 0 + #[doc = "HASH peripheral clock enable during CSleep mode"] + pub fn set_hashlpen(&mut self, val: super::vals::C1Ahb2lpenrDcmilpen) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "Bank 1 CRC busy flag"] - pub fn set_crc_busy(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); + #[doc = "RNG peripheral clock enable during CSleep mode"] + pub const fn rnglpen(&self) -> super::vals::C1Ahb2lpenrDcmilpen { + let val = (self.0 >> 6usize) & 0x01; + super::vals::C1Ahb2lpenrDcmilpen(val as u8) } - #[doc = "Bank 1 end-of-program flag"] - pub const fn eop(&self) -> bool { - let val = (self.0 >> 16usize) & 0x01; - val != 0 + #[doc = "RNG peripheral clock enable during CSleep mode"] + pub fn set_rnglpen(&mut self, val: super::vals::C1Ahb2lpenrDcmilpen) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); } - #[doc = "Bank 1 end-of-program flag"] - pub fn set_eop(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + #[doc = "SDMMC2 and SDMMC2 Delay Clock Enable During CSleep Mode"] + pub const fn sdmmc2lpen(&self) -> super::vals::C1Ahb2lpenrDcmilpen { + let val = (self.0 >> 9usize) & 0x01; + super::vals::C1Ahb2lpenrDcmilpen(val as u8) } - #[doc = "Bank 1 write protection error flag"] - pub const fn wrperr(&self) -> bool { - let val = (self.0 >> 17usize) & 0x01; - val != 0 + #[doc = "SDMMC2 and SDMMC2 Delay Clock Enable During CSleep Mode"] + pub fn set_sdmmc2lpen(&mut self, val: super::vals::C1Ahb2lpenrDcmilpen) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); } - #[doc = "Bank 1 write protection error flag"] - pub fn set_wrperr(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); + #[doc = "SRAM1 Clock Enable During CSleep Mode"] + pub const fn sram1lpen(&self) -> super::vals::C1Ahb2lpenrDcmilpen { + let val = (self.0 >> 29usize) & 0x01; + super::vals::C1Ahb2lpenrDcmilpen(val as u8) } - #[doc = "Bank 1 programming sequence error flag"] - pub const fn pgserr(&self) -> bool { - let val = (self.0 >> 18usize) & 0x01; - val != 0 + #[doc = "SRAM1 Clock Enable During CSleep Mode"] + pub fn set_sram1lpen(&mut self, val: super::vals::C1Ahb2lpenrDcmilpen) { + self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); } - #[doc = "Bank 1 programming sequence error flag"] - pub fn set_pgserr(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize); + #[doc = "SRAM2 Clock Enable During CSleep Mode"] + pub const fn sram2lpen(&self) -> super::vals::C1Ahb2lpenrDcmilpen { + let val = (self.0 >> 30usize) & 0x01; + super::vals::C1Ahb2lpenrDcmilpen(val as u8) } - #[doc = "Bank 1 strobe error flag"] - pub const fn strberr(&self) -> bool { - let val = (self.0 >> 19usize) & 0x01; - val != 0 + #[doc = "SRAM2 Clock Enable During CSleep Mode"] + pub fn set_sram2lpen(&mut self, val: super::vals::C1Ahb2lpenrDcmilpen) { + self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize); } - #[doc = "Bank 1 strobe error flag"] - pub fn set_strberr(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize); + #[doc = "SRAM3 Clock Enable During CSleep Mode"] + pub const fn sram3lpen(&self) -> super::vals::C1Ahb2lpenrDcmilpen { + let val = (self.0 >> 31usize) & 0x01; + super::vals::C1Ahb2lpenrDcmilpen(val as u8) } - #[doc = "Bank 1 inconsistency error flag"] - pub const fn incerr(&self) -> bool { - let val = (self.0 >> 21usize) & 0x01; - val != 0 + #[doc = "SRAM3 Clock Enable During CSleep Mode"] + pub fn set_sram3lpen(&mut self, val: super::vals::C1Ahb2lpenrDcmilpen) { + self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); } - #[doc = "Bank 1 inconsistency error flag"] - pub fn set_incerr(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); + } + impl Default for C1Ahb2lpenr { + fn default() -> C1Ahb2lpenr { + C1Ahb2lpenr(0) } - #[doc = "Bank 1 write/erase error flag"] - pub const fn operr(&self) -> bool { - let val = (self.0 >> 22usize) & 0x01; - val != 0 + } + #[doc = "RCC Clock Recovery RC Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Crrcr(pub u32); + impl Crrcr { + #[doc = "Internal RC 48 MHz clock calibration"] + pub const fn hsi48cal(&self) -> u16 { + let val = (self.0 >> 0usize) & 0x03ff; + val as u16 } - #[doc = "Bank 1 write/erase error flag"] - pub fn set_operr(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); + #[doc = "Internal RC 48 MHz clock calibration"] + pub fn set_hsi48cal(&mut self, val: u16) { + self.0 = (self.0 & !(0x03ff << 0usize)) | (((val as u32) & 0x03ff) << 0usize); } - #[doc = "Bank 1 read protection error flag"] - pub const fn rdperr(&self) -> bool { - let val = (self.0 >> 23usize) & 0x01; - val != 0 + } + impl Default for Crrcr { + fn default() -> Crrcr { + Crrcr(0) } - #[doc = "Bank 1 read protection error flag"] - pub fn set_rdperr(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize); + } + #[doc = "RCC APB1 High Sleep Clock Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Apb1hlpenr(pub u32); + impl Apb1hlpenr { + #[doc = "Clock Recovery System peripheral clock enable during CSleep mode"] + pub const fn crslpen(&self) -> super::vals::Apb1hlpenrCrslpen { + let val = (self.0 >> 1usize) & 0x01; + super::vals::Apb1hlpenrCrslpen(val as u8) } - #[doc = "Bank 1 secure error flag"] - pub const fn rdserr(&self) -> bool { - let val = (self.0 >> 24usize) & 0x01; - val != 0 + #[doc = "Clock Recovery System peripheral clock enable during CSleep mode"] + pub fn set_crslpen(&mut self, val: super::vals::Apb1hlpenrCrslpen) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - #[doc = "Bank 1 secure error flag"] - pub fn set_rdserr(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize); + #[doc = "SWPMI Peripheral Clocks Enable During CSleep Mode"] + pub const fn swplpen(&self) -> super::vals::Apb1hlpenrCrslpen { + let val = (self.0 >> 2usize) & 0x01; + super::vals::Apb1hlpenrCrslpen(val as u8) } - #[doc = "Bank 1 single correction error flag"] - pub const fn sneccerr1(&self) -> bool { - let val = (self.0 >> 25usize) & 0x01; - val != 0 + #[doc = "SWPMI Peripheral Clocks Enable During CSleep Mode"] + pub fn set_swplpen(&mut self, val: super::vals::Apb1hlpenrCrslpen) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); } - #[doc = "Bank 1 single correction error flag"] - pub fn set_sneccerr1(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize); + #[doc = "OPAMP peripheral clock enable during CSleep mode"] + pub const fn opamplpen(&self) -> super::vals::Apb1hlpenrCrslpen { + let val = (self.0 >> 4usize) & 0x01; + super::vals::Apb1hlpenrCrslpen(val as u8) } - #[doc = "Bank 1 ECC double detection error flag"] - pub const fn dbeccerr(&self) -> bool { - let val = (self.0 >> 26usize) & 0x01; - val != 0 + #[doc = "OPAMP peripheral clock enable during CSleep mode"] + pub fn set_opamplpen(&mut self, val: super::vals::Apb1hlpenrCrslpen) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); } - #[doc = "Bank 1 ECC double detection error flag"] - pub fn set_dbeccerr(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); + #[doc = "MDIOS peripheral clock enable during CSleep mode"] + pub const fn mdioslpen(&self) -> super::vals::Apb1hlpenrCrslpen { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Apb1hlpenrCrslpen(val as u8) } - #[doc = "Bank 1 CRC-complete flag"] - pub const fn crcend(&self) -> bool { - let val = (self.0 >> 27usize) & 0x01; - val != 0 + #[doc = "MDIOS peripheral clock enable during CSleep mode"] + pub fn set_mdioslpen(&mut self, val: super::vals::Apb1hlpenrCrslpen) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "Bank 1 CRC-complete flag"] - pub fn set_crcend(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize); + #[doc = "FDCAN Peripheral Clocks Enable During CSleep Mode"] + pub const fn fdcanlpen(&self) -> super::vals::Apb1hlpenrCrslpen { + let val = (self.0 >> 8usize) & 0x01; + super::vals::Apb1hlpenrCrslpen(val as u8) + } + #[doc = "FDCAN Peripheral Clocks Enable During CSleep Mode"] + pub fn set_fdcanlpen(&mut self, val: super::vals::Apb1hlpenrCrslpen) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); } } - impl Default for Sr { - fn default() -> Sr { - Sr(0) + impl Default for Apb1hlpenr { + fn default() -> Apb1hlpenr { + Apb1hlpenr(0) } } - #[doc = "FLASH control register for bank 1"] + #[doc = "RCC APB1 High Sleep Clock Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr(pub u32); - impl Cr { - #[doc = "Bank 1 configuration lock bit"] - pub const fn lock(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; - val != 0 - } - #[doc = "Bank 1 configuration lock bit"] - pub fn set_lock(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); - } - #[doc = "Bank 1 program enable bit"] - pub const fn pg(&self) -> bool { + pub struct C1Apb1hlpenr(pub u32); + impl C1Apb1hlpenr { + #[doc = "Clock Recovery System peripheral clock enable during CSleep mode"] + pub const fn crslpen(&self) -> super::vals::C1Apb1hlpenrCrslpen { let val = (self.0 >> 1usize) & 0x01; - val != 0 + super::vals::C1Apb1hlpenrCrslpen(val as u8) } - #[doc = "Bank 1 program enable bit"] - pub fn set_pg(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + #[doc = "Clock Recovery System peripheral clock enable during CSleep mode"] + pub fn set_crslpen(&mut self, val: super::vals::C1Apb1hlpenrCrslpen) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - #[doc = "Bank 1 sector erase request"] - pub const fn ser(&self) -> bool { + #[doc = "SWPMI Peripheral Clocks Enable During CSleep Mode"] + pub const fn swplpen(&self) -> super::vals::C1Apb1hlpenrCrslpen { let val = (self.0 >> 2usize) & 0x01; - val != 0 + super::vals::C1Apb1hlpenrCrslpen(val as u8) } - #[doc = "Bank 1 sector erase request"] - pub fn set_ser(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); + #[doc = "SWPMI Peripheral Clocks Enable During CSleep Mode"] + pub fn set_swplpen(&mut self, val: super::vals::C1Apb1hlpenrCrslpen) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); } - #[doc = "Bank 1 erase request"] - pub const fn ber(&self) -> bool { - let val = (self.0 >> 3usize) & 0x01; - val != 0 + #[doc = "OPAMP peripheral clock enable during CSleep mode"] + pub const fn opamplpen(&self) -> super::vals::C1Apb1hlpenrCrslpen { + let val = (self.0 >> 4usize) & 0x01; + super::vals::C1Apb1hlpenrCrslpen(val as u8) } - #[doc = "Bank 1 erase request"] - pub fn set_ber(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); + #[doc = "OPAMP peripheral clock enable during CSleep mode"] + pub fn set_opamplpen(&mut self, val: super::vals::C1Apb1hlpenrCrslpen) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); } - #[doc = "Bank 1 program size"] - pub const fn psize(&self) -> u8 { - let val = (self.0 >> 4usize) & 0x03; - val as u8 + #[doc = "MDIOS peripheral clock enable during CSleep mode"] + pub const fn mdioslpen(&self) -> super::vals::C1Apb1hlpenrCrslpen { + let val = (self.0 >> 5usize) & 0x01; + super::vals::C1Apb1hlpenrCrslpen(val as u8) } - #[doc = "Bank 1 program size"] - pub fn set_psize(&mut self, val: u8) { - self.0 = (self.0 & !(0x03 << 4usize)) | (((val as u32) & 0x03) << 4usize); + #[doc = "MDIOS peripheral clock enable during CSleep mode"] + pub fn set_mdioslpen(&mut self, val: super::vals::C1Apb1hlpenrCrslpen) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "Bank 1 write forcing control bit"] - pub const fn fw(&self) -> bool { - let val = (self.0 >> 6usize) & 0x01; - val != 0 + #[doc = "FDCAN Peripheral Clocks Enable During CSleep Mode"] + pub const fn fdcanlpen(&self) -> super::vals::C1Apb1hlpenrCrslpen { + let val = (self.0 >> 8usize) & 0x01; + super::vals::C1Apb1hlpenrCrslpen(val as u8) } - #[doc = "Bank 1 write forcing control bit"] - pub fn set_fw(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + #[doc = "FDCAN Peripheral Clocks Enable During CSleep Mode"] + pub fn set_fdcanlpen(&mut self, val: super::vals::C1Apb1hlpenrCrslpen) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); } - #[doc = "Bank 1 bank or sector erase start control bit"] - pub const fn start(&self) -> bool { - let val = (self.0 >> 7usize) & 0x01; - val != 0 + } + impl Default for C1Apb1hlpenr { + fn default() -> C1Apb1hlpenr { + C1Apb1hlpenr(0) } - #[doc = "Bank 1 bank or sector erase start control bit"] - pub fn set_start(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + } + #[doc = "RCC Clock Source Interrupt Enable Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Cier(pub u32); + impl Cier { + #[doc = "LSI ready Interrupt Enable"] + pub const fn lsirdyie(&self) -> super::vals::Lsirdyie { + let val = (self.0 >> 0usize) & 0x01; + super::vals::Lsirdyie(val as u8) } - #[doc = "Bank 1 sector erase selection number"] - pub const fn snb(&self) -> u8 { - let val = (self.0 >> 8usize) & 0x07; - val as u8 + #[doc = "LSI ready Interrupt Enable"] + pub fn set_lsirdyie(&mut self, val: super::vals::Lsirdyie) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "Bank 1 sector erase selection number"] - pub fn set_snb(&mut self, val: u8) { - self.0 = (self.0 & !(0x07 << 8usize)) | (((val as u32) & 0x07) << 8usize); + #[doc = "LSE ready Interrupt Enable"] + pub const fn lserdyie(&self) -> super::vals::Lsirdyie { + let val = (self.0 >> 1usize) & 0x01; + super::vals::Lsirdyie(val as u8) + } + #[doc = "LSE ready Interrupt Enable"] + pub fn set_lserdyie(&mut self, val: super::vals::Lsirdyie) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + } + #[doc = "HSI ready Interrupt Enable"] + pub const fn hsirdyie(&self) -> super::vals::Lsirdyie { + let val = (self.0 >> 2usize) & 0x01; + super::vals::Lsirdyie(val as u8) + } + #[doc = "HSI ready Interrupt Enable"] + pub fn set_hsirdyie(&mut self, val: super::vals::Lsirdyie) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); } - #[doc = "Bank 1 CRC control bit"] - pub const fn crc_en(&self) -> bool { - let val = (self.0 >> 15usize) & 0x01; - val != 0 + #[doc = "HSE ready Interrupt Enable"] + pub const fn hserdyie(&self) -> super::vals::Lsirdyie { + let val = (self.0 >> 3usize) & 0x01; + super::vals::Lsirdyie(val as u8) } - #[doc = "Bank 1 CRC control bit"] - pub fn set_crc_en(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); + #[doc = "HSE ready Interrupt Enable"] + pub fn set_hserdyie(&mut self, val: super::vals::Lsirdyie) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); } - #[doc = "Bank 1 end-of-program interrupt control bit"] - pub const fn eopie(&self) -> bool { - let val = (self.0 >> 16usize) & 0x01; - val != 0 + #[doc = "CSI ready Interrupt Enable"] + pub const fn csirdyie(&self) -> super::vals::Lsirdyie { + let val = (self.0 >> 4usize) & 0x01; + super::vals::Lsirdyie(val as u8) } - #[doc = "Bank 1 end-of-program interrupt control bit"] - pub fn set_eopie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + #[doc = "CSI ready Interrupt Enable"] + pub fn set_csirdyie(&mut self, val: super::vals::Lsirdyie) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); } - #[doc = "Bank 1 write protection error interrupt enable bit"] - pub const fn wrperrie(&self) -> bool { - let val = (self.0 >> 17usize) & 0x01; - val != 0 + #[doc = "RC48 ready Interrupt Enable"] + pub const fn hsi48rdyie(&self) -> super::vals::Lsirdyie { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Lsirdyie(val as u8) } - #[doc = "Bank 1 write protection error interrupt enable bit"] - pub fn set_wrperrie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); + #[doc = "RC48 ready Interrupt Enable"] + pub fn set_hsi48rdyie(&mut self, val: super::vals::Lsirdyie) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "Bank 1 programming sequence error interrupt enable bit"] - pub const fn pgserrie(&self) -> bool { - let val = (self.0 >> 18usize) & 0x01; - val != 0 + #[doc = "PLL1 ready Interrupt Enable"] + pub fn pllrdyie(&self, n: usize) -> super::vals::Lsirdyie { + assert!(n < 3usize); + let offs = 6usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; + super::vals::Lsirdyie(val as u8) } - #[doc = "Bank 1 programming sequence error interrupt enable bit"] - pub fn set_pgserrie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize); + #[doc = "PLL1 ready Interrupt Enable"] + pub fn set_pllrdyie(&mut self, n: usize, val: super::vals::Lsirdyie) { + assert!(n < 3usize); + let offs = 6usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); } - #[doc = "Bank 1 strobe error interrupt enable bit"] - pub const fn strberrie(&self) -> bool { - let val = (self.0 >> 19usize) & 0x01; - val != 0 + #[doc = "LSE clock security system Interrupt Enable"] + pub const fn lsecssie(&self) -> super::vals::Lsirdyie { + let val = (self.0 >> 9usize) & 0x01; + super::vals::Lsirdyie(val as u8) } - #[doc = "Bank 1 strobe error interrupt enable bit"] - pub fn set_strberrie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize); + #[doc = "LSE clock security system Interrupt Enable"] + pub fn set_lsecssie(&mut self, val: super::vals::Lsirdyie) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); } - #[doc = "Bank 1 inconsistency error interrupt enable bit"] - pub const fn incerrie(&self) -> bool { - let val = (self.0 >> 21usize) & 0x01; - val != 0 + } + impl Default for Cier { + fn default() -> Cier { + Cier(0) } - #[doc = "Bank 1 inconsistency error interrupt enable bit"] - pub fn set_incerrie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); + } + #[doc = "RCC Internal Clock Source Calibration Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Icscr(pub u32); + impl Icscr { + #[doc = "HSI clock calibration"] + pub const fn hsical(&self) -> u16 { + let val = (self.0 >> 0usize) & 0x0fff; + val as u16 } - #[doc = "Bank 1 write/erase error interrupt enable bit"] - pub const fn operrie(&self) -> bool { - let val = (self.0 >> 22usize) & 0x01; - val != 0 + #[doc = "HSI clock calibration"] + pub fn set_hsical(&mut self, val: u16) { + self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize); } - #[doc = "Bank 1 write/erase error interrupt enable bit"] - pub fn set_operrie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); + #[doc = "HSI clock trimming"] + pub const fn hsitrim(&self) -> u8 { + let val = (self.0 >> 12usize) & 0x3f; + val as u8 } - #[doc = "Bank 1 read protection error interrupt enable bit"] - pub const fn rdperrie(&self) -> bool { - let val = (self.0 >> 23usize) & 0x01; - val != 0 + #[doc = "HSI clock trimming"] + pub fn set_hsitrim(&mut self, val: u8) { + self.0 = (self.0 & !(0x3f << 12usize)) | (((val as u32) & 0x3f) << 12usize); } - #[doc = "Bank 1 read protection error interrupt enable bit"] - pub fn set_rdperrie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize); + #[doc = "CSI clock calibration"] + pub const fn csical(&self) -> u8 { + let val = (self.0 >> 18usize) & 0xff; + val as u8 } - #[doc = "Bank 1 secure error interrupt enable bit"] - pub const fn rdserrie(&self) -> bool { - let val = (self.0 >> 24usize) & 0x01; - val != 0 + #[doc = "CSI clock calibration"] + pub fn set_csical(&mut self, val: u8) { + self.0 = (self.0 & !(0xff << 18usize)) | (((val as u32) & 0xff) << 18usize); } - #[doc = "Bank 1 secure error interrupt enable bit"] - pub fn set_rdserrie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize); + #[doc = "CSI clock trimming"] + pub const fn csitrim(&self) -> u8 { + let val = (self.0 >> 26usize) & 0x1f; + val as u8 } - #[doc = "Bank 1 ECC single correction error interrupt enable bit"] - pub const fn sneccerrie(&self) -> bool { - let val = (self.0 >> 25usize) & 0x01; - val != 0 + #[doc = "CSI clock trimming"] + pub fn set_csitrim(&mut self, val: u8) { + self.0 = (self.0 & !(0x1f << 26usize)) | (((val as u32) & 0x1f) << 26usize); } - #[doc = "Bank 1 ECC single correction error interrupt enable bit"] - pub fn set_sneccerrie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize); + } + impl Default for Icscr { + fn default() -> Icscr { + Icscr(0) } - #[doc = "Bank 1 ECC double detection error interrupt enable bit"] - pub const fn dbeccerrie(&self) -> bool { - let val = (self.0 >> 26usize) & 0x01; - val != 0 + } + #[doc = "RCC APB3 Clock Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct C1Apb3enr(pub u32); + impl C1Apb3enr { + #[doc = "LTDC peripheral clock enable"] + pub const fn ltdcen(&self) -> super::vals::C1Apb3enrLtdcen { + let val = (self.0 >> 3usize) & 0x01; + super::vals::C1Apb3enrLtdcen(val as u8) } - #[doc = "Bank 1 ECC double detection error interrupt enable bit"] - pub fn set_dbeccerrie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); + #[doc = "LTDC peripheral clock enable"] + pub fn set_ltdcen(&mut self, val: super::vals::C1Apb3enrLtdcen) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); } - #[doc = "Bank 1 end of CRC calculation interrupt enable bit"] - pub const fn crcendie(&self) -> bool { - let val = (self.0 >> 27usize) & 0x01; - val != 0 + #[doc = "WWDG1 Clock Enable"] + pub const fn wwdg1en(&self) -> super::vals::C1Apb3enrLtdcen { + let val = (self.0 >> 6usize) & 0x01; + super::vals::C1Apb3enrLtdcen(val as u8) } - #[doc = "Bank 1 end of CRC calculation interrupt enable bit"] - pub fn set_crcendie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize); + #[doc = "WWDG1 Clock Enable"] + pub fn set_wwdg1en(&mut self, val: super::vals::C1Apb3enrLtdcen) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); } } - impl Default for Cr { - fn default() -> Cr { - Cr(0) + impl Default for C1Apb3enr { + fn default() -> C1Apb3enr { + C1Apb3enr(0) } } - #[doc = "FLASH protection address for bank 1"] + #[doc = "RCC APB1 Clock Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct PrarPrg(pub u32); - impl PrarPrg { - #[doc = "Bank 1 lowest PCROP protected address configuration"] - pub const fn prot_area_start(&self) -> u16 { - let val = (self.0 >> 0usize) & 0x0fff; - val as u16 + pub struct C1Apb1lenr(pub u32); + impl C1Apb1lenr { + #[doc = "TIM peripheral clock enable"] + pub const fn tim2en(&self) -> super::vals::C1Apb1lenrTim2en { + let val = (self.0 >> 0usize) & 0x01; + super::vals::C1Apb1lenrTim2en(val as u8) } - #[doc = "Bank 1 lowest PCROP protected address configuration"] - pub fn set_prot_area_start(&mut self, val: u16) { - self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize); + #[doc = "TIM peripheral clock enable"] + pub fn set_tim2en(&mut self, val: super::vals::C1Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "Bank 1 highest PCROP protected address configuration"] - pub const fn prot_area_end(&self) -> u16 { - let val = (self.0 >> 16usize) & 0x0fff; - val as u16 + #[doc = "TIM peripheral clock enable"] + pub const fn tim3en(&self) -> super::vals::C1Apb1lenrTim2en { + let val = (self.0 >> 1usize) & 0x01; + super::vals::C1Apb1lenrTim2en(val as u8) + } + #[doc = "TIM peripheral clock enable"] + pub fn set_tim3en(&mut self, val: super::vals::C1Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + } + #[doc = "TIM peripheral clock enable"] + pub const fn tim4en(&self) -> super::vals::C1Apb1lenrTim2en { + let val = (self.0 >> 2usize) & 0x01; + super::vals::C1Apb1lenrTim2en(val as u8) + } + #[doc = "TIM peripheral clock enable"] + pub fn set_tim4en(&mut self, val: super::vals::C1Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); + } + #[doc = "TIM peripheral clock enable"] + pub const fn tim5en(&self) -> super::vals::C1Apb1lenrTim2en { + let val = (self.0 >> 3usize) & 0x01; + super::vals::C1Apb1lenrTim2en(val as u8) + } + #[doc = "TIM peripheral clock enable"] + pub fn set_tim5en(&mut self, val: super::vals::C1Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); + } + #[doc = "TIM peripheral clock enable"] + pub const fn tim6en(&self) -> super::vals::C1Apb1lenrTim2en { + let val = (self.0 >> 4usize) & 0x01; + super::vals::C1Apb1lenrTim2en(val as u8) + } + #[doc = "TIM peripheral clock enable"] + pub fn set_tim6en(&mut self, val: super::vals::C1Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + } + #[doc = "TIM peripheral clock enable"] + pub const fn tim7en(&self) -> super::vals::C1Apb1lenrTim2en { + let val = (self.0 >> 5usize) & 0x01; + super::vals::C1Apb1lenrTim2en(val as u8) } - #[doc = "Bank 1 highest PCROP protected address configuration"] - pub fn set_prot_area_end(&mut self, val: u16) { - self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize); + #[doc = "TIM peripheral clock enable"] + pub fn set_tim7en(&mut self, val: super::vals::C1Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "Bank 1 PCROP protected erase enable option configuration bit"] - pub const fn dmep(&self) -> bool { - let val = (self.0 >> 31usize) & 0x01; - val != 0 + #[doc = "TIM peripheral clock enable"] + pub const fn tim12en(&self) -> super::vals::C1Apb1lenrTim2en { + let val = (self.0 >> 6usize) & 0x01; + super::vals::C1Apb1lenrTim2en(val as u8) } - #[doc = "Bank 1 PCROP protected erase enable option configuration bit"] - pub fn set_dmep(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize); + #[doc = "TIM peripheral clock enable"] + pub fn set_tim12en(&mut self, val: super::vals::C1Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); } - } - impl Default for PrarPrg { - fn default() -> PrarPrg { - PrarPrg(0) + #[doc = "TIM peripheral clock enable"] + pub const fn tim13en(&self) -> super::vals::C1Apb1lenrTim2en { + let val = (self.0 >> 7usize) & 0x01; + super::vals::C1Apb1lenrTim2en(val as u8) } - } - #[doc = "FLASH option status register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct OptsrPrg(pub u32); - impl OptsrPrg { - #[doc = "BOR reset level option configuration bits"] - pub const fn bor_lev(&self) -> u8 { - let val = (self.0 >> 2usize) & 0x03; - val as u8 + #[doc = "TIM peripheral clock enable"] + pub fn set_tim13en(&mut self, val: super::vals::C1Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); } - #[doc = "BOR reset level option configuration bits"] - pub fn set_bor_lev(&mut self, val: u8) { - self.0 = (self.0 & !(0x03 << 2usize)) | (((val as u32) & 0x03) << 2usize); + #[doc = "TIM peripheral clock enable"] + pub const fn tim14en(&self) -> super::vals::C1Apb1lenrTim2en { + let val = (self.0 >> 8usize) & 0x01; + super::vals::C1Apb1lenrTim2en(val as u8) } - #[doc = "IWDG1 option configuration bit"] - pub const fn iwdg1_hw(&self) -> bool { - let val = (self.0 >> 4usize) & 0x01; - val != 0 + #[doc = "TIM peripheral clock enable"] + pub fn set_tim14en(&mut self, val: super::vals::C1Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); } - #[doc = "IWDG1 option configuration bit"] - pub fn set_iwdg1_hw(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); + #[doc = "LPTIM1 Peripheral Clocks Enable"] + pub const fn lptim1en(&self) -> super::vals::C1Apb1lenrTim2en { + let val = (self.0 >> 9usize) & 0x01; + super::vals::C1Apb1lenrTim2en(val as u8) } - #[doc = "Option byte erase after D1 DStop option configuration bit"] - pub const fn n_rst_stop_d1(&self) -> bool { - let val = (self.0 >> 6usize) & 0x01; - val != 0 + #[doc = "LPTIM1 Peripheral Clocks Enable"] + pub fn set_lptim1en(&mut self, val: super::vals::C1Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); } - #[doc = "Option byte erase after D1 DStop option configuration bit"] - pub fn set_n_rst_stop_d1(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + #[doc = "SPI2 Peripheral Clocks Enable"] + pub const fn spi2en(&self) -> super::vals::C1Apb1lenrTim2en { + let val = (self.0 >> 14usize) & 0x01; + super::vals::C1Apb1lenrTim2en(val as u8) } - #[doc = "Option byte erase after D1 DStandby option configuration bit"] - pub const fn n_rst_stby_d1(&self) -> bool { - let val = (self.0 >> 7usize) & 0x01; - val != 0 + #[doc = "SPI2 Peripheral Clocks Enable"] + pub fn set_spi2en(&mut self, val: super::vals::C1Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); } - #[doc = "Option byte erase after D1 DStandby option configuration bit"] - pub fn set_n_rst_stby_d1(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + #[doc = "SPI3 Peripheral Clocks Enable"] + pub const fn spi3en(&self) -> super::vals::C1Apb1lenrTim2en { + let val = (self.0 >> 15usize) & 0x01; + super::vals::C1Apb1lenrTim2en(val as u8) } - #[doc = "Readout protection level option configuration byte"] - pub const fn rdp(&self) -> u8 { - let val = (self.0 >> 8usize) & 0xff; - val as u8 + #[doc = "SPI3 Peripheral Clocks Enable"] + pub fn set_spi3en(&mut self, val: super::vals::C1Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); } - #[doc = "Readout protection level option configuration byte"] - pub fn set_rdp(&mut self, val: u8) { - self.0 = (self.0 & !(0xff << 8usize)) | (((val as u32) & 0xff) << 8usize); + #[doc = "SPDIFRX Peripheral Clocks Enable"] + pub const fn spdifrxen(&self) -> super::vals::C1Apb1lenrTim2en { + let val = (self.0 >> 16usize) & 0x01; + super::vals::C1Apb1lenrTim2en(val as u8) } - #[doc = "IWDG Stop mode freeze option configuration bit"] - pub const fn fz_iwdg_stop(&self) -> bool { + #[doc = "SPDIFRX Peripheral Clocks Enable"] + pub fn set_spdifrxen(&mut self, val: super::vals::C1Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + } + #[doc = "USART2 Peripheral Clocks Enable"] + pub const fn usart2en(&self) -> super::vals::C1Apb1lenrTim2en { let val = (self.0 >> 17usize) & 0x01; - val != 0 + super::vals::C1Apb1lenrTim2en(val as u8) } - #[doc = "IWDG Stop mode freeze option configuration bit"] - pub fn set_fz_iwdg_stop(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); + #[doc = "USART2 Peripheral Clocks Enable"] + pub fn set_usart2en(&mut self, val: super::vals::C1Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); } - #[doc = "IWDG Standby mode freeze option configuration bit"] - pub const fn fz_iwdg_sdby(&self) -> bool { + #[doc = "USART3 Peripheral Clocks Enable"] + pub const fn usart3en(&self) -> super::vals::C1Apb1lenrTim2en { let val = (self.0 >> 18usize) & 0x01; - val != 0 + super::vals::C1Apb1lenrTim2en(val as u8) } - #[doc = "IWDG Standby mode freeze option configuration bit"] - pub fn set_fz_iwdg_sdby(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize); + #[doc = "USART3 Peripheral Clocks Enable"] + pub fn set_usart3en(&mut self, val: super::vals::C1Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); } - #[doc = "DTCM size select option configuration bits"] - pub const fn st_ram_size(&self) -> u8 { - let val = (self.0 >> 19usize) & 0x03; - val as u8 + #[doc = "UART4 Peripheral Clocks Enable"] + pub const fn uart4en(&self) -> super::vals::C1Apb1lenrTim2en { + let val = (self.0 >> 19usize) & 0x01; + super::vals::C1Apb1lenrTim2en(val as u8) } - #[doc = "DTCM size select option configuration bits"] - pub fn set_st_ram_size(&mut self, val: u8) { - self.0 = (self.0 & !(0x03 << 19usize)) | (((val as u32) & 0x03) << 19usize); + #[doc = "UART4 Peripheral Clocks Enable"] + pub fn set_uart4en(&mut self, val: super::vals::C1Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); } - #[doc = "Security option configuration bit"] - pub const fn security(&self) -> bool { - let val = (self.0 >> 21usize) & 0x01; - val != 0 + #[doc = "UART5 Peripheral Clocks Enable"] + pub const fn uart5en(&self) -> super::vals::C1Apb1lenrTim2en { + let val = (self.0 >> 20usize) & 0x01; + super::vals::C1Apb1lenrTim2en(val as u8) } - #[doc = "Security option configuration bit"] - pub fn set_security(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); + #[doc = "UART5 Peripheral Clocks Enable"] + pub fn set_uart5en(&mut self, val: super::vals::C1Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize); } - #[doc = "User option configuration bit 1"] - pub const fn rss1(&self) -> bool { - let val = (self.0 >> 26usize) & 0x01; - val != 0 + #[doc = "I2C1 Peripheral Clocks Enable"] + pub const fn i2c1en(&self) -> super::vals::C1Apb1lenrTim2en { + let val = (self.0 >> 21usize) & 0x01; + super::vals::C1Apb1lenrTim2en(val as u8) } - #[doc = "User option configuration bit 1"] - pub fn set_rss1(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); + #[doc = "I2C1 Peripheral Clocks Enable"] + pub fn set_i2c1en(&mut self, val: super::vals::C1Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); } - #[doc = "User option configuration bit 2"] - pub const fn rss2(&self) -> bool { - let val = (self.0 >> 27usize) & 0x01; - val != 0 + #[doc = "I2C2 Peripheral Clocks Enable"] + pub const fn i2c2en(&self) -> super::vals::C1Apb1lenrTim2en { + let val = (self.0 >> 22usize) & 0x01; + super::vals::C1Apb1lenrTim2en(val as u8) } - #[doc = "User option configuration bit 2"] - pub fn set_rss2(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize); + #[doc = "I2C2 Peripheral Clocks Enable"] + pub fn set_i2c2en(&mut self, val: super::vals::C1Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); } - #[doc = "I/O high-speed at low-voltage (PRODUCT_BELOW_25V)"] - pub const fn io_hslv(&self) -> bool { - let val = (self.0 >> 29usize) & 0x01; - val != 0 + #[doc = "I2C3 Peripheral Clocks Enable"] + pub const fn i2c3en(&self) -> super::vals::C1Apb1lenrTim2en { + let val = (self.0 >> 23usize) & 0x01; + super::vals::C1Apb1lenrTim2en(val as u8) } - #[doc = "I/O high-speed at low-voltage (PRODUCT_BELOW_25V)"] - pub fn set_io_hslv(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 29usize)) | (((val as u32) & 0x01) << 29usize); + #[doc = "I2C3 Peripheral Clocks Enable"] + pub fn set_i2c3en(&mut self, val: super::vals::C1Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize); } - #[doc = "Bank swapping option configuration bit"] - pub const fn swap_bank_opt(&self) -> bool { - let val = (self.0 >> 31usize) & 0x01; - val != 0 + #[doc = "HDMI-CEC peripheral clock enable"] + pub const fn cecen(&self) -> super::vals::C1Apb1lenrTim2en { + let val = (self.0 >> 27usize) & 0x01; + super::vals::C1Apb1lenrTim2en(val as u8) } - #[doc = "Bank swapping option configuration bit"] - pub fn set_swap_bank_opt(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize); + #[doc = "HDMI-CEC peripheral clock enable"] + pub fn set_cecen(&mut self, val: super::vals::C1Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize); } - } - impl Default for OptsrPrg { - fn default() -> OptsrPrg { - OptsrPrg(0) + #[doc = "DAC1&2 peripheral clock enable"] + pub const fn dac12en(&self) -> super::vals::C1Apb1lenrTim2en { + let val = (self.0 >> 29usize) & 0x01; + super::vals::C1Apb1lenrTim2en(val as u8) } - } - #[doc = "FLASH register with boot address"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct BootCurr(pub u32); - impl BootCurr { - #[doc = "Boot address 0"] - pub const fn boot_add0(&self) -> u16 { - let val = (self.0 >> 0usize) & 0xffff; - val as u16 + #[doc = "DAC1&2 peripheral clock enable"] + pub fn set_dac12en(&mut self, val: super::vals::C1Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); } - #[doc = "Boot address 0"] - pub fn set_boot_add0(&mut self, val: u16) { - self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); + #[doc = "UART7 Peripheral Clocks Enable"] + pub const fn uart7en(&self) -> super::vals::C1Apb1lenrTim2en { + let val = (self.0 >> 30usize) & 0x01; + super::vals::C1Apb1lenrTim2en(val as u8) } - #[doc = "Boot address 1"] - pub const fn boot_add1(&self) -> u16 { - let val = (self.0 >> 16usize) & 0xffff; - val as u16 + #[doc = "UART7 Peripheral Clocks Enable"] + pub fn set_uart7en(&mut self, val: super::vals::C1Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize); + } + #[doc = "UART8 Peripheral Clocks Enable"] + pub const fn uart8en(&self) -> super::vals::C1Apb1lenrTim2en { + let val = (self.0 >> 31usize) & 0x01; + super::vals::C1Apb1lenrTim2en(val as u8) } - #[doc = "Boot address 1"] - pub fn set_boot_add1(&mut self, val: u16) { - self.0 = (self.0 & !(0xffff << 16usize)) | (((val as u32) & 0xffff) << 16usize); + #[doc = "UART8 Peripheral Clocks Enable"] + pub fn set_uart8en(&mut self, val: super::vals::C1Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); } } - impl Default for BootCurr { - fn default() -> BootCurr { - BootCurr(0) + impl Default for C1Apb1lenr { + fn default() -> C1Apb1lenr { + C1Apb1lenr(0) } } - #[doc = "FLASH protection address for bank 1"] + #[doc = "RCC AHB1 Peripheral Reset Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct PrarCur(pub u32); - impl PrarCur { - #[doc = "Bank 1 lowest PCROP protected address"] - pub const fn prot_area_start(&self) -> u16 { - let val = (self.0 >> 0usize) & 0x0fff; - val as u16 + pub struct Ahb1rstr(pub u32); + impl Ahb1rstr { + #[doc = "DMA1 block reset"] + pub const fn dma1rst(&self) -> super::vals::Dma1rst { + let val = (self.0 >> 0usize) & 0x01; + super::vals::Dma1rst(val as u8) } - #[doc = "Bank 1 lowest PCROP protected address"] - pub fn set_prot_area_start(&mut self, val: u16) { - self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize); + #[doc = "DMA1 block reset"] + pub fn set_dma1rst(&mut self, val: super::vals::Dma1rst) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "Bank 1 highest PCROP protected address"] - pub const fn prot_area_end(&self) -> u16 { - let val = (self.0 >> 16usize) & 0x0fff; - val as u16 + #[doc = "DMA2 block reset"] + pub const fn dma2rst(&self) -> super::vals::Dma1rst { + let val = (self.0 >> 1usize) & 0x01; + super::vals::Dma1rst(val as u8) } - #[doc = "Bank 1 highest PCROP protected address"] - pub fn set_prot_area_end(&mut self, val: u16) { - self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize); + #[doc = "DMA2 block reset"] + pub fn set_dma2rst(&mut self, val: super::vals::Dma1rst) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - #[doc = "Bank 1 PCROP protected erase enable option status bit"] - pub const fn dmep(&self) -> bool { - let val = (self.0 >> 31usize) & 0x01; - val != 0 + #[doc = "ADC1&2 block reset"] + pub const fn adc12rst(&self) -> super::vals::Dma1rst { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Dma1rst(val as u8) } - #[doc = "Bank 1 PCROP protected erase enable option status bit"] - pub fn set_dmep(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize); + #[doc = "ADC1&2 block reset"] + pub fn set_adc12rst(&mut self, val: super::vals::Dma1rst) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - } - impl Default for PrarCur { - fn default() -> PrarCur { - PrarCur(0) + #[doc = "ETH1MAC block reset"] + pub const fn eth1macrst(&self) -> super::vals::Dma1rst { + let val = (self.0 >> 15usize) & 0x01; + super::vals::Dma1rst(val as u8) } - } - #[doc = "FLASH CRC start address register for bank 1"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Crcsaddr(pub u32); - impl Crcsaddr { - #[doc = "CRC start address on bank 1"] - pub const fn crc_start_addr(&self) -> u32 { - let val = (self.0 >> 0usize) & 0xffff_ffff; - val as u32 + #[doc = "ETH1MAC block reset"] + pub fn set_eth1macrst(&mut self, val: super::vals::Dma1rst) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); } - #[doc = "CRC start address on bank 1"] - pub fn set_crc_start_addr(&mut self, val: u32) { - self.0 = - (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + #[doc = "USB1OTG block reset"] + pub const fn usb1otgrst(&self) -> super::vals::Dma1rst { + let val = (self.0 >> 25usize) & 0x01; + super::vals::Dma1rst(val as u8) } - } - impl Default for Crcsaddr { - fn default() -> Crcsaddr { - Crcsaddr(0) + #[doc = "USB1OTG block reset"] + pub fn set_usb1otgrst(&mut self, val: super::vals::Dma1rst) { + self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize); } - } - #[doc = "FLASH write sector protection for bank 1"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct WpsnPrgr(pub u32); - impl WpsnPrgr { - #[doc = "Bank 1 sector write protection configuration byte"] - pub const fn wrpsn(&self) -> u8 { - let val = (self.0 >> 0usize) & 0xff; - val as u8 + #[doc = "USB2OTG block reset"] + pub const fn usb2otgrst(&self) -> super::vals::Dma1rst { + let val = (self.0 >> 27usize) & 0x01; + super::vals::Dma1rst(val as u8) } - #[doc = "Bank 1 sector write protection configuration byte"] - pub fn set_wrpsn(&mut self, val: u8) { - self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize); + #[doc = "USB2OTG block reset"] + pub fn set_usb2otgrst(&mut self, val: super::vals::Dma1rst) { + self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize); } } - impl Default for WpsnPrgr { - fn default() -> WpsnPrgr { - WpsnPrgr(0) + impl Default for Ahb1rstr { + fn default() -> Ahb1rstr { + Ahb1rstr(0) } } - #[doc = "FLASH option control register"] + #[doc = "clock control register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Optcr(pub u32); - impl Optcr { - #[doc = "FLASH_OPTCR lock option configuration bit"] - pub const fn optlock(&self) -> bool { + pub struct Cr(pub u32); + impl Cr { + #[doc = "Internal high-speed clock enable"] + pub const fn hsion(&self) -> super::vals::Hsion { let val = (self.0 >> 0usize) & 0x01; - val != 0 + super::vals::Hsion(val as u8) } - #[doc = "FLASH_OPTCR lock option configuration bit"] - pub fn set_optlock(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + #[doc = "Internal high-speed clock enable"] + pub fn set_hsion(&mut self, val: super::vals::Hsion) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "Option byte start change option configuration bit"] - pub const fn optstart(&self) -> bool { + #[doc = "High Speed Internal clock enable in Stop mode"] + pub const fn hsikeron(&self) -> super::vals::Hsion { let val = (self.0 >> 1usize) & 0x01; - val != 0 + super::vals::Hsion(val as u8) } - #[doc = "Option byte start change option configuration bit"] - pub fn set_optstart(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + #[doc = "High Speed Internal clock enable in Stop mode"] + pub fn set_hsikeron(&mut self, val: super::vals::Hsion) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - #[doc = "Flash mass erase enable bit"] - pub const fn mer(&self) -> bool { - let val = (self.0 >> 4usize) & 0x01; + #[doc = "HSI clock ready flag"] + pub const fn hsirdy(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; val != 0 } - #[doc = "Flash mass erase enable bit"] - pub fn set_mer(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); + #[doc = "HSI clock ready flag"] + pub fn set_hsirdy(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); } - #[doc = "Option byte change error interrupt enable bit"] - pub const fn optchangeerrie(&self) -> bool { - let val = (self.0 >> 30usize) & 0x01; - val != 0 + #[doc = "HSI clock divider"] + pub const fn hsidiv(&self) -> super::vals::Hsidiv { + let val = (self.0 >> 3usize) & 0x03; + super::vals::Hsidiv(val as u8) } - #[doc = "Option byte change error interrupt enable bit"] - pub fn set_optchangeerrie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 30usize)) | (((val as u32) & 0x01) << 30usize); + #[doc = "HSI clock divider"] + pub fn set_hsidiv(&mut self, val: super::vals::Hsidiv) { + self.0 = (self.0 & !(0x03 << 3usize)) | (((val.0 as u32) & 0x03) << 3usize); } - #[doc = "Bank swapping configuration bit"] - pub const fn swap_bank(&self) -> bool { - let val = (self.0 >> 31usize) & 0x01; + #[doc = "HSI divider flag"] + pub const fn hsidivf(&self) -> bool { + let val = (self.0 >> 5usize) & 0x01; val != 0 } - #[doc = "Bank swapping configuration bit"] - pub fn set_swap_bank(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize); - } - } - impl Default for Optcr { - fn default() -> Optcr { - Optcr(0) - } - } - #[doc = "FLASH ECC fail address for bank 1"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Far(pub u32); - impl Far { - #[doc = "Bank 1 ECC error address"] - pub const fn fail_ecc_addr(&self) -> u16 { - let val = (self.0 >> 0usize) & 0x7fff; - val as u16 - } - #[doc = "Bank 1 ECC error address"] - pub fn set_fail_ecc_addr(&mut self, val: u16) { - self.0 = (self.0 & !(0x7fff << 0usize)) | (((val as u32) & 0x7fff) << 0usize); + #[doc = "HSI divider flag"] + pub fn set_hsidivf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); } - } - impl Default for Far { - fn default() -> Far { - Far(0) + #[doc = "CSI clock enable"] + pub const fn csion(&self) -> super::vals::Hsion { + let val = (self.0 >> 7usize) & 0x01; + super::vals::Hsion(val as u8) } - } - #[doc = "FLASH key register for bank 1"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Keyr(pub u32); - impl Keyr { - #[doc = "Bank 1 access configuration unlock key"] - pub const fn keyr(&self) -> u32 { - let val = (self.0 >> 0usize) & 0xffff_ffff; - val as u32 + #[doc = "CSI clock enable"] + pub fn set_csion(&mut self, val: super::vals::Hsion) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); } - #[doc = "Bank 1 access configuration unlock key"] - pub fn set_keyr(&mut self, val: u32) { - self.0 = - (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + #[doc = "CSI clock ready flag"] + pub const fn csirdy(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 } - } - impl Default for Keyr { - fn default() -> Keyr { - Keyr(0) + #[doc = "CSI clock ready flag"] + pub fn set_csirdy(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); } - } - #[doc = "FLASH CRC data register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Crcdatar(pub u32); - impl Crcdatar { - #[doc = "CRC result"] - pub const fn crc_data(&self) -> u32 { - let val = (self.0 >> 0usize) & 0xffff_ffff; - val as u32 + #[doc = "CSI clock enable in Stop mode"] + pub const fn csikeron(&self) -> super::vals::Hsion { + let val = (self.0 >> 9usize) & 0x01; + super::vals::Hsion(val as u8) } - #[doc = "CRC result"] - pub fn set_crc_data(&mut self, val: u32) { - self.0 = - (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + #[doc = "CSI clock enable in Stop mode"] + pub fn set_csikeron(&mut self, val: super::vals::Hsion) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); } - } - impl Default for Crcdatar { - fn default() -> Crcdatar { - Crcdatar(0) + #[doc = "RC48 clock enable"] + pub const fn hsi48on(&self) -> super::vals::Hsion { + let val = (self.0 >> 12usize) & 0x01; + super::vals::Hsion(val as u8) } - } - #[doc = "FLASH clear control register for bank 1"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ccr(pub u32); - impl Ccr { - #[doc = "Bank 1 EOP1 flag clear bit"] - pub const fn clr_eop(&self) -> bool { - let val = (self.0 >> 16usize) & 0x01; + #[doc = "RC48 clock enable"] + pub fn set_hsi48on(&mut self, val: super::vals::Hsion) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); + } + #[doc = "RC48 clock ready flag"] + pub const fn hsi48rdy(&self) -> bool { + let val = (self.0 >> 13usize) & 0x01; val != 0 } - #[doc = "Bank 1 EOP1 flag clear bit"] - pub fn set_clr_eop(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + #[doc = "RC48 clock ready flag"] + pub fn set_hsi48rdy(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); } - #[doc = "Bank 1 WRPERR1 flag clear bit"] - pub const fn clr_wrperr(&self) -> bool { - let val = (self.0 >> 17usize) & 0x01; + #[doc = "D1 domain clocks ready flag"] + pub const fn d1ckrdy(&self) -> bool { + let val = (self.0 >> 14usize) & 0x01; val != 0 } - #[doc = "Bank 1 WRPERR1 flag clear bit"] - pub fn set_clr_wrperr(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); + #[doc = "D1 domain clocks ready flag"] + pub fn set_d1ckrdy(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); } - #[doc = "Bank 1 PGSERR1 flag clear bi"] - pub const fn clr_pgserr(&self) -> bool { - let val = (self.0 >> 18usize) & 0x01; + #[doc = "D2 domain clocks ready flag"] + pub const fn d2ckrdy(&self) -> bool { + let val = (self.0 >> 15usize) & 0x01; val != 0 } - #[doc = "Bank 1 PGSERR1 flag clear bi"] - pub fn set_clr_pgserr(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize); + #[doc = "D2 domain clocks ready flag"] + pub fn set_d2ckrdy(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); } - #[doc = "Bank 1 STRBERR1 flag clear bit"] - pub const fn clr_strberr(&self) -> bool { - let val = (self.0 >> 19usize) & 0x01; - val != 0 + #[doc = "HSE clock enable"] + pub const fn hseon(&self) -> super::vals::Hsion { + let val = (self.0 >> 16usize) & 0x01; + super::vals::Hsion(val as u8) } - #[doc = "Bank 1 STRBERR1 flag clear bit"] - pub fn set_clr_strberr(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize); + #[doc = "HSE clock enable"] + pub fn set_hseon(&mut self, val: super::vals::Hsion) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); } - #[doc = "Bank 1 INCERR1 flag clear bit"] - pub const fn clr_incerr(&self) -> bool { - let val = (self.0 >> 21usize) & 0x01; + #[doc = "HSE clock ready flag"] + pub const fn hserdy(&self) -> bool { + let val = (self.0 >> 17usize) & 0x01; val != 0 } - #[doc = "Bank 1 INCERR1 flag clear bit"] - pub fn set_clr_incerr(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); + #[doc = "HSE clock ready flag"] + pub fn set_hserdy(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); } - #[doc = "Bank 1 OPERR1 flag clear bit"] - pub const fn clr_operr(&self) -> bool { - let val = (self.0 >> 22usize) & 0x01; - val != 0 + #[doc = "HSE clock bypass"] + pub const fn hsebyp(&self) -> super::vals::Hsebyp { + let val = (self.0 >> 18usize) & 0x01; + super::vals::Hsebyp(val as u8) } - #[doc = "Bank 1 OPERR1 flag clear bit"] - pub fn set_clr_operr(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); + #[doc = "HSE clock bypass"] + pub fn set_hsebyp(&mut self, val: super::vals::Hsebyp) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); } - #[doc = "Bank 1 RDPERR1 flag clear bit"] - pub const fn clr_rdperr(&self) -> bool { - let val = (self.0 >> 23usize) & 0x01; - val != 0 + #[doc = "HSE Clock Security System enable"] + pub const fn hsecsson(&self) -> super::vals::Hsion { + let val = (self.0 >> 19usize) & 0x01; + super::vals::Hsion(val as u8) } - #[doc = "Bank 1 RDPERR1 flag clear bit"] - pub fn set_clr_rdperr(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize); + #[doc = "HSE Clock Security System enable"] + pub fn set_hsecsson(&mut self, val: super::vals::Hsion) { + self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); } - #[doc = "Bank 1 RDSERR1 flag clear bit"] - pub const fn clr_rdserr(&self) -> bool { + #[doc = "PLL1 enable"] + pub const fn pll1on(&self) -> super::vals::Hsion { let val = (self.0 >> 24usize) & 0x01; - val != 0 + super::vals::Hsion(val as u8) } - #[doc = "Bank 1 RDSERR1 flag clear bit"] - pub fn set_clr_rdserr(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize); + #[doc = "PLL1 enable"] + pub fn set_pll1on(&mut self, val: super::vals::Hsion) { + self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); } - #[doc = "Bank 1 SNECCERR1 flag clear bit"] - pub const fn clr_sneccerr(&self) -> bool { + #[doc = "PLL1 clock ready flag"] + pub const fn pll1rdy(&self) -> bool { let val = (self.0 >> 25usize) & 0x01; val != 0 } - #[doc = "Bank 1 SNECCERR1 flag clear bit"] - pub fn set_clr_sneccerr(&mut self, val: bool) { + #[doc = "PLL1 clock ready flag"] + pub fn set_pll1rdy(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize); } - #[doc = "Bank 1 DBECCERR1 flag clear bit"] - pub const fn clr_dbeccerr(&self) -> bool { + #[doc = "PLL2 enable"] + pub const fn pll2on(&self) -> super::vals::Hsion { let val = (self.0 >> 26usize) & 0x01; - val != 0 + super::vals::Hsion(val as u8) } - #[doc = "Bank 1 DBECCERR1 flag clear bit"] - pub fn set_clr_dbeccerr(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); + #[doc = "PLL2 enable"] + pub fn set_pll2on(&mut self, val: super::vals::Hsion) { + self.0 = (self.0 & !(0x01 << 26usize)) | (((val.0 as u32) & 0x01) << 26usize); } - #[doc = "Bank 1 CRCEND1 flag clear bit"] - pub const fn clr_crcend(&self) -> bool { + #[doc = "PLL2 clock ready flag"] + pub const fn pll2rdy(&self) -> bool { let val = (self.0 >> 27usize) & 0x01; val != 0 } - #[doc = "Bank 1 CRCEND1 flag clear bit"] - pub fn set_clr_crcend(&mut self, val: bool) { + #[doc = "PLL2 clock ready flag"] + pub fn set_pll2rdy(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize); } + #[doc = "PLL3 enable"] + pub const fn pll3on(&self) -> super::vals::Hsion { + let val = (self.0 >> 28usize) & 0x01; + super::vals::Hsion(val as u8) + } + #[doc = "PLL3 enable"] + pub fn set_pll3on(&mut self, val: super::vals::Hsion) { + self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); + } + #[doc = "PLL3 clock ready flag"] + pub const fn pll3rdy(&self) -> bool { + let val = (self.0 >> 29usize) & 0x01; + val != 0 + } + #[doc = "PLL3 clock ready flag"] + pub fn set_pll3rdy(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 29usize)) | (((val as u32) & 0x01) << 29usize); + } } - impl Default for Ccr { - fn default() -> Ccr { - Ccr(0) + impl Default for Cr { + fn default() -> Cr { + Cr(0) + } + } + #[doc = "RCC PLL3 Dividers Configuration Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Pll3divr(pub u32); + impl Pll3divr { + #[doc = "Multiplication factor for PLL1 VCO"] + pub const fn divn3(&self) -> u16 { + let val = (self.0 >> 0usize) & 0x01ff; + val as u16 + } + #[doc = "Multiplication factor for PLL1 VCO"] + pub fn set_divn3(&mut self, val: u16) { + self.0 = (self.0 & !(0x01ff << 0usize)) | (((val as u32) & 0x01ff) << 0usize); + } + #[doc = "PLL DIVP division factor"] + pub const fn divp3(&self) -> u8 { + let val = (self.0 >> 9usize) & 0x7f; + val as u8 + } + #[doc = "PLL DIVP division factor"] + pub fn set_divp3(&mut self, val: u8) { + self.0 = (self.0 & !(0x7f << 9usize)) | (((val as u32) & 0x7f) << 9usize); + } + #[doc = "PLL DIVQ division factor"] + pub const fn divq3(&self) -> u8 { + let val = (self.0 >> 16usize) & 0x7f; + val as u8 + } + #[doc = "PLL DIVQ division factor"] + pub fn set_divq3(&mut self, val: u8) { + self.0 = (self.0 & !(0x7f << 16usize)) | (((val as u32) & 0x7f) << 16usize); + } + #[doc = "PLL DIVR division factor"] + pub const fn divr3(&self) -> u8 { + let val = (self.0 >> 24usize) & 0x7f; + val as u8 + } + #[doc = "PLL DIVR division factor"] + pub fn set_divr3(&mut self, val: u8) { + self.0 = (self.0 & !(0x7f << 24usize)) | (((val as u32) & 0x7f) << 24usize); + } + } + impl Default for Pll3divr { + fn default() -> Pll3divr { + Pll3divr(0) + } + } + #[doc = "RCC APB3 Sleep Clock Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Apb3lpenr(pub u32); + impl Apb3lpenr { + #[doc = "LTDC peripheral clock enable during CSleep mode"] + pub const fn ltdclpen(&self) -> super::vals::Apb3lpenrLtdclpen { + let val = (self.0 >> 3usize) & 0x01; + super::vals::Apb3lpenrLtdclpen(val as u8) + } + #[doc = "LTDC peripheral clock enable during CSleep mode"] + pub fn set_ltdclpen(&mut self, val: super::vals::Apb3lpenrLtdclpen) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); + } + #[doc = "WWDG1 Clock Enable During CSleep Mode"] + pub const fn wwdg1lpen(&self) -> super::vals::Apb3lpenrLtdclpen { + let val = (self.0 >> 6usize) & 0x01; + super::vals::Apb3lpenrLtdclpen(val as u8) + } + #[doc = "WWDG1 Clock Enable During CSleep Mode"] + pub fn set_wwdg1lpen(&mut self, val: super::vals::Apb3lpenrLtdclpen) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); + } + } + impl Default for Apb3lpenr { + fn default() -> Apb3lpenr { + Apb3lpenr(0) } } - #[doc = "Access control register"] + #[doc = "RCC Domain 3 Kernel Clock Configuration Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Acr(pub u32); - impl Acr { - #[doc = "Read latency"] - pub const fn latency(&self) -> u8 { + pub struct D3ccipr(pub u32); + impl D3ccipr { + #[doc = "LPUART1 kernel clock source selection"] + pub const fn lpuart1sel(&self) -> super::vals::Lpuart1sel { let val = (self.0 >> 0usize) & 0x07; - val as u8 + super::vals::Lpuart1sel(val as u8) } - #[doc = "Read latency"] - pub fn set_latency(&mut self, val: u8) { - self.0 = (self.0 & !(0x07 << 0usize)) | (((val as u32) & 0x07) << 0usize); + #[doc = "LPUART1 kernel clock source selection"] + pub fn set_lpuart1sel(&mut self, val: super::vals::Lpuart1sel) { + self.0 = (self.0 & !(0x07 << 0usize)) | (((val.0 as u32) & 0x07) << 0usize); } - #[doc = "Flash signal delay"] - pub const fn wrhighfreq(&self) -> u8 { - let val = (self.0 >> 4usize) & 0x03; - val as u8 + #[doc = "I2C4 kernel clock source selection"] + pub const fn i2c4sel(&self) -> super::vals::I2c4sel { + let val = (self.0 >> 8usize) & 0x03; + super::vals::I2c4sel(val as u8) } - #[doc = "Flash signal delay"] - pub fn set_wrhighfreq(&mut self, val: u8) { - self.0 = (self.0 & !(0x03 << 4usize)) | (((val as u32) & 0x03) << 4usize); + #[doc = "I2C4 kernel clock source selection"] + pub fn set_i2c4sel(&mut self, val: super::vals::I2c4sel) { + self.0 = (self.0 & !(0x03 << 8usize)) | (((val.0 as u32) & 0x03) << 8usize); } - } - impl Default for Acr { - fn default() -> Acr { - Acr(0) + #[doc = "LPTIM2 kernel clock source selection"] + pub const fn lptim2sel(&self) -> super::vals::Lptim2sel { + let val = (self.0 >> 10usize) & 0x07; + super::vals::Lptim2sel(val as u8) } - } - #[doc = "FLASH secure address for bank 1"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct ScarPrg(pub u32); - impl ScarPrg { - #[doc = "Bank 1 lowest secure protected address configuration"] - pub const fn sec_area_start(&self) -> u16 { - let val = (self.0 >> 0usize) & 0x0fff; - val as u16 + #[doc = "LPTIM2 kernel clock source selection"] + pub fn set_lptim2sel(&mut self, val: super::vals::Lptim2sel) { + self.0 = (self.0 & !(0x07 << 10usize)) | (((val.0 as u32) & 0x07) << 10usize); } - #[doc = "Bank 1 lowest secure protected address configuration"] - pub fn set_sec_area_start(&mut self, val: u16) { - self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize); + #[doc = "LPTIM3,4,5 kernel clock source selection"] + pub const fn lptim345sel(&self) -> super::vals::Lptim2sel { + let val = (self.0 >> 13usize) & 0x07; + super::vals::Lptim2sel(val as u8) } - #[doc = "Bank 1 highest secure protected address configuration"] - pub const fn sec_area_end(&self) -> u16 { - let val = (self.0 >> 16usize) & 0x0fff; - val as u16 + #[doc = "LPTIM3,4,5 kernel clock source selection"] + pub fn set_lptim345sel(&mut self, val: super::vals::Lptim2sel) { + self.0 = (self.0 & !(0x07 << 13usize)) | (((val.0 as u32) & 0x07) << 13usize); } - #[doc = "Bank 1 highest secure protected address configuration"] - pub fn set_sec_area_end(&mut self, val: u16) { - self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize); + #[doc = "SAR ADC kernel clock source selection"] + pub const fn adcsel(&self) -> super::vals::Adcsel { + let val = (self.0 >> 16usize) & 0x03; + super::vals::Adcsel(val as u8) } - #[doc = "Bank 1 secure protected erase enable option configuration bit"] - pub const fn dmes(&self) -> bool { - let val = (self.0 >> 31usize) & 0x01; - val != 0 + #[doc = "SAR ADC kernel clock source selection"] + pub fn set_adcsel(&mut self, val: super::vals::Adcsel) { + self.0 = (self.0 & !(0x03 << 16usize)) | (((val.0 as u32) & 0x03) << 16usize); } - #[doc = "Bank 1 secure protected erase enable option configuration bit"] - pub fn set_dmes(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize); + #[doc = "Sub-Block A of SAI4 kernel clock source selection"] + pub const fn sai4asel(&self) -> super::vals::Sai4asel { + let val = (self.0 >> 21usize) & 0x07; + super::vals::Sai4asel(val as u8) } - } - impl Default for ScarPrg { - fn default() -> ScarPrg { - ScarPrg(0) + #[doc = "Sub-Block A of SAI4 kernel clock source selection"] + pub fn set_sai4asel(&mut self, val: super::vals::Sai4asel) { + self.0 = (self.0 & !(0x07 << 21usize)) | (((val.0 as u32) & 0x07) << 21usize); } - } - #[doc = "FLASH write sector protection for bank 1"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct WpsnCurr(pub u32); - impl WpsnCurr { - #[doc = "Bank 1 sector write protection option status byte"] - pub const fn wrpsn(&self) -> u8 { - let val = (self.0 >> 0usize) & 0xff; - val as u8 + #[doc = "Sub-Block B of SAI4 kernel clock source selection"] + pub const fn sai4bsel(&self) -> super::vals::Sai4asel { + let val = (self.0 >> 24usize) & 0x07; + super::vals::Sai4asel(val as u8) } - #[doc = "Bank 1 sector write protection option status byte"] - pub fn set_wrpsn(&mut self, val: u8) { - self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize); + #[doc = "Sub-Block B of SAI4 kernel clock source selection"] + pub fn set_sai4bsel(&mut self, val: super::vals::Sai4asel) { + self.0 = (self.0 & !(0x07 << 24usize)) | (((val.0 as u32) & 0x07) << 24usize); + } + #[doc = "SPI6 kernel clock source selection"] + pub const fn spi6sel(&self) -> super::vals::Spi6sel { + let val = (self.0 >> 28usize) & 0x07; + super::vals::Spi6sel(val as u8) + } + #[doc = "SPI6 kernel clock source selection"] + pub fn set_spi6sel(&mut self, val: super::vals::Spi6sel) { + self.0 = (self.0 & !(0x07 << 28usize)) | (((val.0 as u32) & 0x07) << 28usize); } } - impl Default for WpsnCurr { - fn default() -> WpsnCurr { - WpsnCurr(0) + impl Default for D3ccipr { + fn default() -> D3ccipr { + D3ccipr(0) } } - #[doc = "FLASH register with boot address"] + #[doc = "RCC Domain 2 Kernel Clock Configuration Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct BootPrgr(pub u32); - impl BootPrgr { - #[doc = "Boot address 0"] - pub const fn boot_add0(&self) -> u16 { - let val = (self.0 >> 0usize) & 0xffff; - val as u16 + pub struct D2ccip1r(pub u32); + impl D2ccip1r { + #[doc = "SAI1 and DFSDM1 kernel Aclk clock source selection"] + pub const fn sai1sel(&self) -> super::vals::Sai1sel { + let val = (self.0 >> 0usize) & 0x07; + super::vals::Sai1sel(val as u8) } - #[doc = "Boot address 0"] - pub fn set_boot_add0(&mut self, val: u16) { - self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); + #[doc = "SAI1 and DFSDM1 kernel Aclk clock source selection"] + pub fn set_sai1sel(&mut self, val: super::vals::Sai1sel) { + self.0 = (self.0 & !(0x07 << 0usize)) | (((val.0 as u32) & 0x07) << 0usize); } - #[doc = "Boot address 1"] - pub const fn boot_add1(&self) -> u16 { - let val = (self.0 >> 16usize) & 0xffff; - val as u16 + #[doc = "SAI2 and SAI3 kernel clock source selection"] + pub const fn sai23sel(&self) -> super::vals::Sai1sel { + let val = (self.0 >> 6usize) & 0x07; + super::vals::Sai1sel(val as u8) } - #[doc = "Boot address 1"] - pub fn set_boot_add1(&mut self, val: u16) { - self.0 = (self.0 & !(0xffff << 16usize)) | (((val as u32) & 0xffff) << 16usize); + #[doc = "SAI2 and SAI3 kernel clock source selection"] + pub fn set_sai23sel(&mut self, val: super::vals::Sai1sel) { + self.0 = (self.0 & !(0x07 << 6usize)) | (((val.0 as u32) & 0x07) << 6usize); } - } - impl Default for BootPrgr { - fn default() -> BootPrgr { - BootPrgr(0) + #[doc = "SPI/I2S1,2 and 3 kernel clock source selection"] + pub const fn spi123sel(&self) -> super::vals::Sai1sel { + let val = (self.0 >> 12usize) & 0x07; + super::vals::Sai1sel(val as u8) } - } - #[doc = "FLASH CRC end address register for bank 1"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Crceaddr(pub u32); - impl Crceaddr { - #[doc = "CRC end address on bank 1"] - pub const fn crc_end_addr(&self) -> u32 { - let val = (self.0 >> 0usize) & 0xffff_ffff; - val as u32 + #[doc = "SPI/I2S1,2 and 3 kernel clock source selection"] + pub fn set_spi123sel(&mut self, val: super::vals::Sai1sel) { + self.0 = (self.0 & !(0x07 << 12usize)) | (((val.0 as u32) & 0x07) << 12usize); } - #[doc = "CRC end address on bank 1"] - pub fn set_crc_end_addr(&mut self, val: u32) { - self.0 = - (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + #[doc = "SPI4 and 5 kernel clock source selection"] + pub const fn spi45sel(&self) -> super::vals::Spi45sel { + let val = (self.0 >> 16usize) & 0x07; + super::vals::Spi45sel(val as u8) } - } - impl Default for Crceaddr { - fn default() -> Crceaddr { - Crceaddr(0) + #[doc = "SPI4 and 5 kernel clock source selection"] + pub fn set_spi45sel(&mut self, val: super::vals::Spi45sel) { + self.0 = (self.0 & !(0x07 << 16usize)) | (((val.0 as u32) & 0x07) << 16usize); } - } - #[doc = "FLASH secure address for bank 1"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct ScarCur(pub u32); - impl ScarCur { - #[doc = "Bank 1 lowest secure protected address"] - pub const fn sec_area_start(&self) -> u16 { - let val = (self.0 >> 0usize) & 0x0fff; - val as u16 + #[doc = "SPDIFRX kernel clock source selection"] + pub const fn spdifsel(&self) -> super::vals::Spdifsel { + let val = (self.0 >> 20usize) & 0x03; + super::vals::Spdifsel(val as u8) } - #[doc = "Bank 1 lowest secure protected address"] - pub fn set_sec_area_start(&mut self, val: u16) { - self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize); + #[doc = "SPDIFRX kernel clock source selection"] + pub fn set_spdifsel(&mut self, val: super::vals::Spdifsel) { + self.0 = (self.0 & !(0x03 << 20usize)) | (((val.0 as u32) & 0x03) << 20usize); } - #[doc = "Bank 1 highest secure protected address"] - pub const fn sec_area_end(&self) -> u16 { - let val = (self.0 >> 16usize) & 0x0fff; - val as u16 + #[doc = "DFSDM1 kernel Clk clock source selection"] + pub const fn dfsdm1sel(&self) -> super::vals::Dfsdm1sel { + let val = (self.0 >> 24usize) & 0x01; + super::vals::Dfsdm1sel(val as u8) } - #[doc = "Bank 1 highest secure protected address"] - pub fn set_sec_area_end(&mut self, val: u16) { - self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize); + #[doc = "DFSDM1 kernel Clk clock source selection"] + pub fn set_dfsdm1sel(&mut self, val: super::vals::Dfsdm1sel) { + self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); } - #[doc = "Bank 1 secure protected erase enable option status bit"] - pub const fn dmes(&self) -> bool { + #[doc = "FDCAN kernel clock source selection"] + pub const fn fdcansel(&self) -> super::vals::Fdcansel { + let val = (self.0 >> 28usize) & 0x03; + super::vals::Fdcansel(val as u8) + } + #[doc = "FDCAN kernel clock source selection"] + pub fn set_fdcansel(&mut self, val: super::vals::Fdcansel) { + self.0 = (self.0 & !(0x03 << 28usize)) | (((val.0 as u32) & 0x03) << 28usize); + } + #[doc = "SWPMI kernel clock source selection"] + pub const fn swpsel(&self) -> super::vals::Swpsel { let val = (self.0 >> 31usize) & 0x01; - val != 0 + super::vals::Swpsel(val as u8) } - #[doc = "Bank 1 secure protected erase enable option status bit"] - pub fn set_dmes(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize); + #[doc = "SWPMI kernel clock source selection"] + pub fn set_swpsel(&mut self, val: super::vals::Swpsel) { + self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); } } - impl Default for ScarCur { - fn default() -> ScarCur { - ScarCur(0) + impl Default for D2ccip1r { + fn default() -> D2ccip1r { + D2ccip1r(0) } } - #[doc = "FLASH CRC control register for bank 1"] + #[doc = "RCC APB4 Sleep Clock Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Crccr(pub u32); - impl Crccr { - #[doc = "Bank 1 CRC sector number"] - pub const fn crc_sect(&self) -> u8 { - let val = (self.0 >> 0usize) & 0x07; - val as u8 + pub struct Apb4lpenr(pub u32); + impl Apb4lpenr { + #[doc = "SYSCFG peripheral clock enable during CSleep mode"] + pub const fn syscfglpen(&self) -> super::vals::Apb4lpenrSyscfglpen { + let val = (self.0 >> 1usize) & 0x01; + super::vals::Apb4lpenrSyscfglpen(val as u8) } - #[doc = "Bank 1 CRC sector number"] - pub fn set_crc_sect(&mut self, val: u8) { - self.0 = (self.0 & !(0x07 << 0usize)) | (((val as u32) & 0x07) << 0usize); + #[doc = "SYSCFG peripheral clock enable during CSleep mode"] + pub fn set_syscfglpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - #[doc = "Bank 1 CRC select bit"] - pub const fn all_bank(&self) -> bool { - let val = (self.0 >> 7usize) & 0x01; - val != 0 + #[doc = "LPUART1 Peripheral Clocks Enable During CSleep Mode"] + pub const fn lpuart1lpen(&self) -> super::vals::Apb4lpenrSyscfglpen { + let val = (self.0 >> 3usize) & 0x01; + super::vals::Apb4lpenrSyscfglpen(val as u8) } - #[doc = "Bank 1 CRC select bit"] - pub fn set_all_bank(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + #[doc = "LPUART1 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_lpuart1lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); } - #[doc = "Bank 1 CRC sector mode select bit"] - pub const fn crc_by_sect(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; - val != 0 + #[doc = "SPI6 Peripheral Clocks Enable During CSleep Mode"] + pub const fn spi6lpen(&self) -> super::vals::Apb4lpenrSyscfglpen { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Apb4lpenrSyscfglpen(val as u8) } - #[doc = "Bank 1 CRC sector mode select bit"] - pub fn set_crc_by_sect(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + #[doc = "SPI6 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_spi6lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "Bank 1 CRC sector select bit"] - pub const fn add_sect(&self) -> bool { + #[doc = "I2C4 Peripheral Clocks Enable During CSleep Mode"] + pub const fn i2c4lpen(&self) -> super::vals::Apb4lpenrSyscfglpen { + let val = (self.0 >> 7usize) & 0x01; + super::vals::Apb4lpenrSyscfglpen(val as u8) + } + #[doc = "I2C4 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_i2c4lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); + } + #[doc = "LPTIM2 Peripheral Clocks Enable During CSleep Mode"] + pub const fn lptim2lpen(&self) -> super::vals::Apb4lpenrSyscfglpen { let val = (self.0 >> 9usize) & 0x01; - val != 0 + super::vals::Apb4lpenrSyscfglpen(val as u8) } - #[doc = "Bank 1 CRC sector select bit"] - pub fn set_add_sect(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + #[doc = "LPTIM2 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_lptim2lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); } - #[doc = "Bank 1 CRC sector list clear bit"] - pub const fn clean_sect(&self) -> bool { + #[doc = "LPTIM3 Peripheral Clocks Enable During CSleep Mode"] + pub const fn lptim3lpen(&self) -> super::vals::Apb4lpenrSyscfglpen { let val = (self.0 >> 10usize) & 0x01; - val != 0 + super::vals::Apb4lpenrSyscfglpen(val as u8) } - #[doc = "Bank 1 CRC sector list clear bit"] - pub fn set_clean_sect(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); + #[doc = "LPTIM3 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_lptim3lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); } - #[doc = "Bank 1 CRC start bit"] - pub const fn start_crc(&self) -> bool { - let val = (self.0 >> 16usize) & 0x01; - val != 0 + #[doc = "LPTIM4 Peripheral Clocks Enable During CSleep Mode"] + pub const fn lptim4lpen(&self) -> super::vals::Apb4lpenrSyscfglpen { + let val = (self.0 >> 11usize) & 0x01; + super::vals::Apb4lpenrSyscfglpen(val as u8) } - #[doc = "Bank 1 CRC start bit"] - pub fn set_start_crc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + #[doc = "LPTIM4 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_lptim4lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); } - #[doc = "Bank 1 CRC clear bit"] - pub const fn clean_crc(&self) -> bool { - let val = (self.0 >> 17usize) & 0x01; - val != 0 + #[doc = "LPTIM5 Peripheral Clocks Enable During CSleep Mode"] + pub const fn lptim5lpen(&self) -> super::vals::Apb4lpenrSyscfglpen { + let val = (self.0 >> 12usize) & 0x01; + super::vals::Apb4lpenrSyscfglpen(val as u8) } - #[doc = "Bank 1 CRC clear bit"] - pub fn set_clean_crc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); + #[doc = "LPTIM5 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_lptim5lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); } - #[doc = "Bank 1 CRC burst size"] - pub const fn crc_burst(&self) -> u8 { - let val = (self.0 >> 20usize) & 0x03; - val as u8 + #[doc = "COMP1/2 peripheral clock enable during CSleep mode"] + pub const fn comp12lpen(&self) -> super::vals::Apb4lpenrSyscfglpen { + let val = (self.0 >> 14usize) & 0x01; + super::vals::Apb4lpenrSyscfglpen(val as u8) } - #[doc = "Bank 1 CRC burst size"] - pub fn set_crc_burst(&mut self, val: u8) { - self.0 = (self.0 & !(0x03 << 20usize)) | (((val as u32) & 0x03) << 20usize); + #[doc = "COMP1/2 peripheral clock enable during CSleep mode"] + pub fn set_comp12lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); } - } - impl Default for Crccr { - fn default() -> Crccr { - Crccr(0) + #[doc = "VREF peripheral clock enable during CSleep mode"] + pub const fn vreflpen(&self) -> super::vals::Apb4lpenrSyscfglpen { + let val = (self.0 >> 15usize) & 0x01; + super::vals::Apb4lpenrSyscfglpen(val as u8) } - } - #[doc = "FLASH option key register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Optkeyr(pub u32); - impl Optkeyr { - #[doc = "Unlock key option bytes"] - pub const fn optkeyr(&self) -> u32 { - let val = (self.0 >> 0usize) & 0xffff_ffff; - val as u32 + #[doc = "VREF peripheral clock enable during CSleep mode"] + pub fn set_vreflpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); } - #[doc = "Unlock key option bytes"] - pub fn set_optkeyr(&mut self, val: u32) { - self.0 = - (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + #[doc = "RTC APB Clock Enable During CSleep Mode"] + pub const fn rtcapblpen(&self) -> super::vals::Apb4lpenrSyscfglpen { + let val = (self.0 >> 16usize) & 0x01; + super::vals::Apb4lpenrSyscfglpen(val as u8) } - } - impl Default for Optkeyr { - fn default() -> Optkeyr { - Optkeyr(0) + #[doc = "RTC APB Clock Enable During CSleep Mode"] + pub fn set_rtcapblpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); } - } - #[doc = "FLASH option clear control register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Optccr(pub u32); - impl Optccr { - #[doc = "OPTCHANGEERR reset bit"] - pub const fn clr_optchangeerr(&self) -> bool { - let val = (self.0 >> 30usize) & 0x01; - val != 0 + #[doc = "SAI4 Peripheral Clocks Enable During CSleep Mode"] + pub const fn sai4lpen(&self) -> super::vals::Apb4lpenrSyscfglpen { + let val = (self.0 >> 21usize) & 0x01; + super::vals::Apb4lpenrSyscfglpen(val as u8) } - #[doc = "OPTCHANGEERR reset bit"] - pub fn set_clr_optchangeerr(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 30usize)) | (((val as u32) & 0x01) << 30usize); + #[doc = "SAI4 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_sai4lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); } } - impl Default for Optccr { - fn default() -> Optccr { - Optccr(0) + impl Default for Apb4lpenr { + fn default() -> Apb4lpenr { + Apb4lpenr(0) } } - #[doc = "FLASH option status register"] + #[doc = "RCC AHB3 Reset Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct OptsrCur(pub u32); - impl OptsrCur { - #[doc = "Option byte change ongoing flag"] - pub const fn opt_busy(&self) -> bool { + pub struct Ahb3rstr(pub u32); + impl Ahb3rstr { + #[doc = "MDMA block reset"] + pub const fn mdmarst(&self) -> super::vals::Mdmarst { let val = (self.0 >> 0usize) & 0x01; - val != 0 - } - #[doc = "Option byte change ongoing flag"] - pub fn set_opt_busy(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); - } - #[doc = "Brownout level option status bit"] - pub const fn bor_lev(&self) -> u8 { - let val = (self.0 >> 2usize) & 0x03; - val as u8 + super::vals::Mdmarst(val as u8) } - #[doc = "Brownout level option status bit"] - pub fn set_bor_lev(&mut self, val: u8) { - self.0 = (self.0 & !(0x03 << 2usize)) | (((val as u32) & 0x03) << 2usize); + #[doc = "MDMA block reset"] + pub fn set_mdmarst(&mut self, val: super::vals::Mdmarst) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "IWDG1 control option status bit"] - pub const fn iwdg1_hw(&self) -> bool { + #[doc = "DMA2D block reset"] + pub const fn dma2drst(&self) -> super::vals::Mdmarst { let val = (self.0 >> 4usize) & 0x01; - val != 0 - } - #[doc = "IWDG1 control option status bit"] - pub fn set_iwdg1_hw(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); - } - #[doc = "D1 DStop entry reset option status bit"] - pub const fn n_rst_stop_d1(&self) -> bool { - let val = (self.0 >> 6usize) & 0x01; - val != 0 - } - #[doc = "D1 DStop entry reset option status bit"] - pub fn set_n_rst_stop_d1(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); - } - #[doc = "D1 DStandby entry reset option status bit"] - pub const fn n_rst_stby_d1(&self) -> bool { - let val = (self.0 >> 7usize) & 0x01; - val != 0 - } - #[doc = "D1 DStandby entry reset option status bit"] - pub fn set_n_rst_stby_d1(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); - } - #[doc = "Readout protection level option status byte"] - pub const fn rdp(&self) -> u8 { - let val = (self.0 >> 8usize) & 0xff; - val as u8 - } - #[doc = "Readout protection level option status byte"] - pub fn set_rdp(&mut self, val: u8) { - self.0 = (self.0 & !(0xff << 8usize)) | (((val as u32) & 0xff) << 8usize); + super::vals::Mdmarst(val as u8) } - #[doc = "IWDG Stop mode freeze option status bit"] - pub const fn fz_iwdg_stop(&self) -> bool { - let val = (self.0 >> 17usize) & 0x01; - val != 0 + #[doc = "DMA2D block reset"] + pub fn set_dma2drst(&mut self, val: super::vals::Mdmarst) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); } - #[doc = "IWDG Stop mode freeze option status bit"] - pub fn set_fz_iwdg_stop(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); + #[doc = "JPGDEC block reset"] + pub const fn jpgdecrst(&self) -> super::vals::Mdmarst { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Mdmarst(val as u8) } - #[doc = "IWDG Standby mode freeze option status bit"] - pub const fn fz_iwdg_sdby(&self) -> bool { - let val = (self.0 >> 18usize) & 0x01; - val != 0 + #[doc = "JPGDEC block reset"] + pub fn set_jpgdecrst(&mut self, val: super::vals::Mdmarst) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "IWDG Standby mode freeze option status bit"] - pub fn set_fz_iwdg_sdby(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize); + #[doc = "FMC block reset"] + pub const fn fmcrst(&self) -> super::vals::Mdmarst { + let val = (self.0 >> 12usize) & 0x01; + super::vals::Mdmarst(val as u8) } - #[doc = "DTCM RAM size option status"] - pub const fn st_ram_size(&self) -> u8 { - let val = (self.0 >> 19usize) & 0x03; - val as u8 + #[doc = "FMC block reset"] + pub fn set_fmcrst(&mut self, val: super::vals::Mdmarst) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); } - #[doc = "DTCM RAM size option status"] - pub fn set_st_ram_size(&mut self, val: u8) { - self.0 = (self.0 & !(0x03 << 19usize)) | (((val as u32) & 0x03) << 19usize); + #[doc = "QUADSPI and QUADSPI delay block reset"] + pub const fn qspirst(&self) -> super::vals::Mdmarst { + let val = (self.0 >> 14usize) & 0x01; + super::vals::Mdmarst(val as u8) } - #[doc = "Security enable option status bit"] - pub const fn security(&self) -> bool { - let val = (self.0 >> 21usize) & 0x01; - val != 0 + #[doc = "QUADSPI and QUADSPI delay block reset"] + pub fn set_qspirst(&mut self, val: super::vals::Mdmarst) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); } - #[doc = "Security enable option status bit"] - pub fn set_security(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); + #[doc = "SDMMC1 and SDMMC1 delay block reset"] + pub const fn sdmmc1rst(&self) -> super::vals::Mdmarst { + let val = (self.0 >> 16usize) & 0x01; + super::vals::Mdmarst(val as u8) } - #[doc = "User option bit 1"] - pub const fn rss1(&self) -> bool { - let val = (self.0 >> 26usize) & 0x01; - val != 0 + #[doc = "SDMMC1 and SDMMC1 delay block reset"] + pub fn set_sdmmc1rst(&mut self, val: super::vals::Mdmarst) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); } - #[doc = "User option bit 1"] - pub fn set_rss1(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); + #[doc = "CPU reset"] + pub const fn cpurst(&self) -> super::vals::Mdmarst { + let val = (self.0 >> 31usize) & 0x01; + super::vals::Mdmarst(val as u8) } - #[doc = "Device personalization status bit"] - pub const fn perso_ok(&self) -> bool { - let val = (self.0 >> 28usize) & 0x01; - val != 0 + #[doc = "CPU reset"] + pub fn set_cpurst(&mut self, val: super::vals::Mdmarst) { + self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); } - #[doc = "Device personalization status bit"] - pub fn set_perso_ok(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize); + } + impl Default for Ahb3rstr { + fn default() -> Ahb3rstr { + Ahb3rstr(0) } - #[doc = "I/O high-speed at low-voltage status bit (PRODUCT_BELOW_25V)"] - pub const fn io_hslv(&self) -> bool { - let val = (self.0 >> 29usize) & 0x01; - val != 0 + } + #[doc = "RCC Domain 1 Clock Configuration Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct D1cfgr(pub u32); + impl D1cfgr { + #[doc = "D1 domain AHB prescaler"] + pub const fn hpre(&self) -> super::vals::Hpre { + let val = (self.0 >> 0usize) & 0x0f; + super::vals::Hpre(val as u8) } - #[doc = "I/O high-speed at low-voltage status bit (PRODUCT_BELOW_25V)"] - pub fn set_io_hslv(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 29usize)) | (((val as u32) & 0x01) << 29usize); + #[doc = "D1 domain AHB prescaler"] + pub fn set_hpre(&mut self, val: super::vals::Hpre) { + self.0 = (self.0 & !(0x0f << 0usize)) | (((val.0 as u32) & 0x0f) << 0usize); } - #[doc = "Option byte change error flag"] - pub const fn optchangeerr(&self) -> bool { - let val = (self.0 >> 30usize) & 0x01; - val != 0 + #[doc = "D1 domain APB3 prescaler"] + pub const fn d1ppre(&self) -> super::vals::D1ppre { + let val = (self.0 >> 4usize) & 0x07; + super::vals::D1ppre(val as u8) } - #[doc = "Option byte change error flag"] - pub fn set_optchangeerr(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 30usize)) | (((val as u32) & 0x01) << 30usize); + #[doc = "D1 domain APB3 prescaler"] + pub fn set_d1ppre(&mut self, val: super::vals::D1ppre) { + self.0 = (self.0 & !(0x07 << 4usize)) | (((val.0 as u32) & 0x07) << 4usize); } - #[doc = "Bank swapping option status bit"] - pub const fn swap_bank_opt(&self) -> bool { - let val = (self.0 >> 31usize) & 0x01; - val != 0 + #[doc = "D1 domain Core prescaler"] + pub const fn d1cpre(&self) -> super::vals::Hpre { + let val = (self.0 >> 8usize) & 0x0f; + super::vals::Hpre(val as u8) } - #[doc = "Bank swapping option status bit"] - pub fn set_swap_bank_opt(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize); + #[doc = "D1 domain Core prescaler"] + pub fn set_d1cpre(&mut self, val: super::vals::Hpre) { + self.0 = (self.0 & !(0x0f << 8usize)) | (((val.0 as u32) & 0x0f) << 8usize); } } - impl Default for OptsrCur { - fn default() -> OptsrCur { - OptsrCur(0) + impl Default for D1cfgr { + fn default() -> D1cfgr { + D1cfgr(0) } } - } -} -pub mod i2c_v2 { - use crate::generic::*; - #[doc = "Inter-integrated circuit"] - #[derive(Copy, Clone)] - pub struct I2c(pub *mut u8); - unsafe impl Send for I2c {} - unsafe impl Sync for I2c {} - impl I2c { - #[doc = "Control register 1"] - pub fn cr1(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(0usize)) } - } - #[doc = "Control register 2"] - pub fn cr2(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(4usize)) } - } - #[doc = "Own address register 1"] - pub fn oar1(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(8usize)) } - } - #[doc = "Own address register 2"] - pub fn oar2(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(12usize)) } - } - #[doc = "Timing register"] - pub fn timingr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(16usize)) } - } - #[doc = "Status register 1"] - pub fn timeoutr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(20usize)) } - } - #[doc = "Interrupt and Status register"] - pub fn isr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(24usize)) } - } - #[doc = "Interrupt clear register"] - pub fn icr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(28usize)) } - } - #[doc = "PEC register"] - pub fn pecr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(32usize)) } - } - #[doc = "Receive data register"] - pub fn rxdr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(36usize)) } - } - #[doc = "Transmit data register"] - pub fn txdr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(40usize)) } - } - } - pub mod regs { - use crate::generic::*; - #[doc = "Control register 1"] + #[doc = "RCC AHB4 Peripheral Reset Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr1(pub u32); - impl Cr1 { - #[doc = "Peripheral enable"] - pub const fn pe(&self) -> bool { + pub struct Ahb4rstr(pub u32); + impl Ahb4rstr { + #[doc = "GPIO block reset"] + pub const fn gpioarst(&self) -> super::vals::Gpioarst { let val = (self.0 >> 0usize) & 0x01; - val != 0 + super::vals::Gpioarst(val as u8) } - #[doc = "Peripheral enable"] - pub fn set_pe(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + #[doc = "GPIO block reset"] + pub fn set_gpioarst(&mut self, val: super::vals::Gpioarst) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "TX Interrupt enable"] - pub const fn txie(&self) -> bool { + #[doc = "GPIO block reset"] + pub const fn gpiobrst(&self) -> super::vals::Gpioarst { let val = (self.0 >> 1usize) & 0x01; - val != 0 + super::vals::Gpioarst(val as u8) } - #[doc = "TX Interrupt enable"] - pub fn set_txie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + #[doc = "GPIO block reset"] + pub fn set_gpiobrst(&mut self, val: super::vals::Gpioarst) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - #[doc = "RX Interrupt enable"] - pub const fn rxie(&self) -> bool { + #[doc = "GPIO block reset"] + pub const fn gpiocrst(&self) -> super::vals::Gpioarst { let val = (self.0 >> 2usize) & 0x01; - val != 0 + super::vals::Gpioarst(val as u8) } - #[doc = "RX Interrupt enable"] - pub fn set_rxie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); + #[doc = "GPIO block reset"] + pub fn set_gpiocrst(&mut self, val: super::vals::Gpioarst) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); } - #[doc = "Address match interrupt enable (slave only)"] - pub const fn addrie(&self) -> bool { + #[doc = "GPIO block reset"] + pub const fn gpiodrst(&self) -> super::vals::Gpioarst { let val = (self.0 >> 3usize) & 0x01; - val != 0 + super::vals::Gpioarst(val as u8) } - #[doc = "Address match interrupt enable (slave only)"] - pub fn set_addrie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); + #[doc = "GPIO block reset"] + pub fn set_gpiodrst(&mut self, val: super::vals::Gpioarst) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); } - #[doc = "Not acknowledge received interrupt enable"] - pub const fn nackie(&self) -> bool { + #[doc = "GPIO block reset"] + pub const fn gpioerst(&self) -> super::vals::Gpioarst { let val = (self.0 >> 4usize) & 0x01; - val != 0 + super::vals::Gpioarst(val as u8) } - #[doc = "Not acknowledge received interrupt enable"] - pub fn set_nackie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); + #[doc = "GPIO block reset"] + pub fn set_gpioerst(&mut self, val: super::vals::Gpioarst) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); } - #[doc = "STOP detection Interrupt enable"] - pub const fn stopie(&self) -> bool { + #[doc = "GPIO block reset"] + pub const fn gpiofrst(&self) -> super::vals::Gpioarst { let val = (self.0 >> 5usize) & 0x01; - val != 0 + super::vals::Gpioarst(val as u8) } - #[doc = "STOP detection Interrupt enable"] - pub fn set_stopie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); + #[doc = "GPIO block reset"] + pub fn set_gpiofrst(&mut self, val: super::vals::Gpioarst) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "Transfer Complete interrupt enable"] - pub const fn tcie(&self) -> bool { + #[doc = "GPIO block reset"] + pub const fn gpiogrst(&self) -> super::vals::Gpioarst { let val = (self.0 >> 6usize) & 0x01; - val != 0 + super::vals::Gpioarst(val as u8) } - #[doc = "Transfer Complete interrupt enable"] - pub fn set_tcie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + #[doc = "GPIO block reset"] + pub fn set_gpiogrst(&mut self, val: super::vals::Gpioarst) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); } - #[doc = "Error interrupts enable"] - pub const fn errie(&self) -> bool { + #[doc = "GPIO block reset"] + pub const fn gpiohrst(&self) -> super::vals::Gpioarst { let val = (self.0 >> 7usize) & 0x01; - val != 0 + super::vals::Gpioarst(val as u8) } - #[doc = "Error interrupts enable"] - pub fn set_errie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + #[doc = "GPIO block reset"] + pub fn set_gpiohrst(&mut self, val: super::vals::Gpioarst) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); } - #[doc = "Digital noise filter"] - pub const fn dnf(&self) -> super::vals::Dnf { - let val = (self.0 >> 8usize) & 0x0f; - super::vals::Dnf(val as u8) + #[doc = "GPIO block reset"] + pub const fn gpioirst(&self) -> super::vals::Gpioarst { + let val = (self.0 >> 8usize) & 0x01; + super::vals::Gpioarst(val as u8) } - #[doc = "Digital noise filter"] - pub fn set_dnf(&mut self, val: super::vals::Dnf) { - self.0 = (self.0 & !(0x0f << 8usize)) | (((val.0 as u32) & 0x0f) << 8usize); + #[doc = "GPIO block reset"] + pub fn set_gpioirst(&mut self, val: super::vals::Gpioarst) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); } - #[doc = "Analog noise filter OFF"] - pub const fn anfoff(&self) -> bool { - let val = (self.0 >> 12usize) & 0x01; - val != 0 + #[doc = "GPIO block reset"] + pub const fn gpiojrst(&self) -> super::vals::Gpioarst { + let val = (self.0 >> 9usize) & 0x01; + super::vals::Gpioarst(val as u8) } - #[doc = "Analog noise filter OFF"] - pub fn set_anfoff(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); + #[doc = "GPIO block reset"] + pub fn set_gpiojrst(&mut self, val: super::vals::Gpioarst) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); } - #[doc = "DMA transmission requests enable"] - pub const fn txdmaen(&self) -> bool { - let val = (self.0 >> 14usize) & 0x01; - val != 0 + #[doc = "GPIO block reset"] + pub const fn gpiokrst(&self) -> super::vals::Gpioarst { + let val = (self.0 >> 10usize) & 0x01; + super::vals::Gpioarst(val as u8) } - #[doc = "DMA transmission requests enable"] - pub fn set_txdmaen(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); + #[doc = "GPIO block reset"] + pub fn set_gpiokrst(&mut self, val: super::vals::Gpioarst) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); } - #[doc = "DMA reception requests enable"] - pub const fn rxdmaen(&self) -> bool { - let val = (self.0 >> 15usize) & 0x01; - val != 0 + #[doc = "CRC block reset"] + pub const fn crcrst(&self) -> super::vals::Gpioarst { + let val = (self.0 >> 19usize) & 0x01; + super::vals::Gpioarst(val as u8) } - #[doc = "DMA reception requests enable"] - pub fn set_rxdmaen(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); + #[doc = "CRC block reset"] + pub fn set_crcrst(&mut self, val: super::vals::Gpioarst) { + self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); } - #[doc = "Slave byte control"] - pub const fn sbc(&self) -> bool { - let val = (self.0 >> 16usize) & 0x01; - val != 0 + #[doc = "BDMA block reset"] + pub const fn bdmarst(&self) -> super::vals::Gpioarst { + let val = (self.0 >> 21usize) & 0x01; + super::vals::Gpioarst(val as u8) } - #[doc = "Slave byte control"] - pub fn set_sbc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + #[doc = "BDMA block reset"] + pub fn set_bdmarst(&mut self, val: super::vals::Gpioarst) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); } - #[doc = "Clock stretching disable"] - pub const fn nostretch(&self) -> bool { - let val = (self.0 >> 17usize) & 0x01; - val != 0 + #[doc = "ADC3 block reset"] + pub const fn adc3rst(&self) -> super::vals::Gpioarst { + let val = (self.0 >> 24usize) & 0x01; + super::vals::Gpioarst(val as u8) } - #[doc = "Clock stretching disable"] - pub fn set_nostretch(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); + #[doc = "ADC3 block reset"] + pub fn set_adc3rst(&mut self, val: super::vals::Gpioarst) { + self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); } - #[doc = "General call enable"] - pub const fn gcen(&self) -> bool { - let val = (self.0 >> 19usize) & 0x01; - val != 0 + #[doc = "HSEM block reset"] + pub const fn hsemrst(&self) -> super::vals::Gpioarst { + let val = (self.0 >> 25usize) & 0x01; + super::vals::Gpioarst(val as u8) } - #[doc = "General call enable"] - pub fn set_gcen(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize); + #[doc = "HSEM block reset"] + pub fn set_hsemrst(&mut self, val: super::vals::Gpioarst) { + self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize); } - #[doc = "SMBus Host address enable"] - pub const fn smbhen(&self) -> bool { - let val = (self.0 >> 20usize) & 0x01; - val != 0 + } + impl Default for Ahb4rstr { + fn default() -> Ahb4rstr { + Ahb4rstr(0) } - #[doc = "SMBus Host address enable"] - pub fn set_smbhen(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize); + } + #[doc = "RCC APB1 Low Sleep Clock Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct C1Apb1llpenr(pub u32); + impl C1Apb1llpenr { + #[doc = "TIM2 peripheral clock enable during CSleep mode"] + pub const fn tim2lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { + let val = (self.0 >> 0usize) & 0x01; + super::vals::C1Apb1llpenrTim2lpen(val as u8) } - #[doc = "SMBus Device Default address enable"] - pub const fn smbden(&self) -> bool { - let val = (self.0 >> 21usize) & 0x01; - val != 0 + #[doc = "TIM2 peripheral clock enable during CSleep mode"] + pub fn set_tim2lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "SMBus Device Default address enable"] - pub fn set_smbden(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); + #[doc = "TIM3 peripheral clock enable during CSleep mode"] + pub const fn tim3lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { + let val = (self.0 >> 1usize) & 0x01; + super::vals::C1Apb1llpenrTim2lpen(val as u8) } - #[doc = "SMBUS alert enable"] - pub const fn alerten(&self) -> bool { - let val = (self.0 >> 22usize) & 0x01; - val != 0 + #[doc = "TIM3 peripheral clock enable during CSleep mode"] + pub fn set_tim3lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - #[doc = "SMBUS alert enable"] - pub fn set_alerten(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); + #[doc = "TIM4 peripheral clock enable during CSleep mode"] + pub const fn tim4lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { + let val = (self.0 >> 2usize) & 0x01; + super::vals::C1Apb1llpenrTim2lpen(val as u8) } - #[doc = "PEC enable"] - pub const fn pecen(&self) -> bool { - let val = (self.0 >> 23usize) & 0x01; - val != 0 + #[doc = "TIM4 peripheral clock enable during CSleep mode"] + pub fn set_tim4lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); } - #[doc = "PEC enable"] - pub fn set_pecen(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize); + #[doc = "TIM5 peripheral clock enable during CSleep mode"] + pub const fn tim5lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { + let val = (self.0 >> 3usize) & 0x01; + super::vals::C1Apb1llpenrTim2lpen(val as u8) } - } - impl Default for Cr1 { - fn default() -> Cr1 { - Cr1(0) + #[doc = "TIM5 peripheral clock enable during CSleep mode"] + pub fn set_tim5lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); } - } - #[doc = "Timing register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Timingr(pub u32); - impl Timingr { - #[doc = "SCL low period (master mode)"] - pub const fn scll(&self) -> u8 { - let val = (self.0 >> 0usize) & 0xff; - val as u8 + #[doc = "TIM6 peripheral clock enable during CSleep mode"] + pub const fn tim6lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { + let val = (self.0 >> 4usize) & 0x01; + super::vals::C1Apb1llpenrTim2lpen(val as u8) } - #[doc = "SCL low period (master mode)"] - pub fn set_scll(&mut self, val: u8) { - self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize); + #[doc = "TIM6 peripheral clock enable during CSleep mode"] + pub fn set_tim6lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); } - #[doc = "SCL high period (master mode)"] - pub const fn sclh(&self) -> u8 { - let val = (self.0 >> 8usize) & 0xff; - val as u8 + #[doc = "TIM7 peripheral clock enable during CSleep mode"] + pub const fn tim7lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { + let val = (self.0 >> 5usize) & 0x01; + super::vals::C1Apb1llpenrTim2lpen(val as u8) } - #[doc = "SCL high period (master mode)"] - pub fn set_sclh(&mut self, val: u8) { - self.0 = (self.0 & !(0xff << 8usize)) | (((val as u32) & 0xff) << 8usize); + #[doc = "TIM7 peripheral clock enable during CSleep mode"] + pub fn set_tim7lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "Data hold time"] - pub const fn sdadel(&self) -> u8 { - let val = (self.0 >> 16usize) & 0x0f; - val as u8 + #[doc = "TIM12 peripheral clock enable during CSleep mode"] + pub const fn tim12lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { + let val = (self.0 >> 6usize) & 0x01; + super::vals::C1Apb1llpenrTim2lpen(val as u8) + } + #[doc = "TIM12 peripheral clock enable during CSleep mode"] + pub fn set_tim12lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); } - #[doc = "Data hold time"] - pub fn set_sdadel(&mut self, val: u8) { - self.0 = (self.0 & !(0x0f << 16usize)) | (((val as u32) & 0x0f) << 16usize); + #[doc = "TIM13 peripheral clock enable during CSleep mode"] + pub const fn tim13lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { + let val = (self.0 >> 7usize) & 0x01; + super::vals::C1Apb1llpenrTim2lpen(val as u8) } - #[doc = "Data setup time"] - pub const fn scldel(&self) -> u8 { - let val = (self.0 >> 20usize) & 0x0f; - val as u8 + #[doc = "TIM13 peripheral clock enable during CSleep mode"] + pub fn set_tim13lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); } - #[doc = "Data setup time"] - pub fn set_scldel(&mut self, val: u8) { - self.0 = (self.0 & !(0x0f << 20usize)) | (((val as u32) & 0x0f) << 20usize); + #[doc = "TIM14 peripheral clock enable during CSleep mode"] + pub const fn tim14lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { + let val = (self.0 >> 8usize) & 0x01; + super::vals::C1Apb1llpenrTim2lpen(val as u8) } - #[doc = "Timing prescaler"] - pub const fn presc(&self) -> u8 { - let val = (self.0 >> 28usize) & 0x0f; - val as u8 + #[doc = "TIM14 peripheral clock enable during CSleep mode"] + pub fn set_tim14lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); } - #[doc = "Timing prescaler"] - pub fn set_presc(&mut self, val: u8) { - self.0 = (self.0 & !(0x0f << 28usize)) | (((val as u32) & 0x0f) << 28usize); + #[doc = "LPTIM1 Peripheral Clocks Enable During CSleep Mode"] + pub const fn lptim1lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { + let val = (self.0 >> 9usize) & 0x01; + super::vals::C1Apb1llpenrTim2lpen(val as u8) } - } - impl Default for Timingr { - fn default() -> Timingr { - Timingr(0) + #[doc = "LPTIM1 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_lptim1lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); } - } - #[doc = "Receive data register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Rxdr(pub u32); - impl Rxdr { - #[doc = "8-bit receive data"] - pub const fn rxdata(&self) -> u8 { - let val = (self.0 >> 0usize) & 0xff; - val as u8 + #[doc = "SPI2 Peripheral Clocks Enable During CSleep Mode"] + pub const fn spi2lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { + let val = (self.0 >> 14usize) & 0x01; + super::vals::C1Apb1llpenrTim2lpen(val as u8) } - #[doc = "8-bit receive data"] - pub fn set_rxdata(&mut self, val: u8) { - self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize); + #[doc = "SPI2 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_spi2lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); } - } - impl Default for Rxdr { - fn default() -> Rxdr { - Rxdr(0) + #[doc = "SPI3 Peripheral Clocks Enable During CSleep Mode"] + pub const fn spi3lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { + let val = (self.0 >> 15usize) & 0x01; + super::vals::C1Apb1llpenrTim2lpen(val as u8) } - } - #[doc = "PEC register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Pecr(pub u32); - impl Pecr { - #[doc = "Packet error checking register"] - pub const fn pec(&self) -> u8 { - let val = (self.0 >> 0usize) & 0xff; - val as u8 + #[doc = "SPI3 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_spi3lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); } - #[doc = "Packet error checking register"] - pub fn set_pec(&mut self, val: u8) { - self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize); + #[doc = "SPDIFRX Peripheral Clocks Enable During CSleep Mode"] + pub const fn spdifrxlpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { + let val = (self.0 >> 16usize) & 0x01; + super::vals::C1Apb1llpenrTim2lpen(val as u8) } - } - impl Default for Pecr { - fn default() -> Pecr { - Pecr(0) + #[doc = "SPDIFRX Peripheral Clocks Enable During CSleep Mode"] + pub fn set_spdifrxlpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); } - } - #[doc = "Control register 2"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr2(pub u32); - impl Cr2 { - #[doc = "Slave address bit (master mode)"] - pub const fn sadd(&self) -> u16 { - let val = (self.0 >> 0usize) & 0x03ff; - val as u16 + #[doc = "USART2 Peripheral Clocks Enable During CSleep Mode"] + pub const fn usart2lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { + let val = (self.0 >> 17usize) & 0x01; + super::vals::C1Apb1llpenrTim2lpen(val as u8) } - #[doc = "Slave address bit (master mode)"] - pub fn set_sadd(&mut self, val: u16) { - self.0 = (self.0 & !(0x03ff << 0usize)) | (((val as u32) & 0x03ff) << 0usize); + #[doc = "USART2 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_usart2lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); } - #[doc = "Transfer direction (master mode)"] - pub const fn rd_wrn(&self) -> super::vals::RdWrn { - let val = (self.0 >> 10usize) & 0x01; - super::vals::RdWrn(val as u8) + #[doc = "USART3 Peripheral Clocks Enable During CSleep Mode"] + pub const fn usart3lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { + let val = (self.0 >> 18usize) & 0x01; + super::vals::C1Apb1llpenrTim2lpen(val as u8) } - #[doc = "Transfer direction (master mode)"] - pub fn set_rd_wrn(&mut self, val: super::vals::RdWrn) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); + #[doc = "USART3 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_usart3lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); } - #[doc = "10-bit addressing mode (master mode)"] - pub const fn add10(&self) -> super::vals::Add { - let val = (self.0 >> 11usize) & 0x01; - super::vals::Add(val as u8) + #[doc = "UART4 Peripheral Clocks Enable During CSleep Mode"] + pub const fn uart4lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { + let val = (self.0 >> 19usize) & 0x01; + super::vals::C1Apb1llpenrTim2lpen(val as u8) } - #[doc = "10-bit addressing mode (master mode)"] - pub fn set_add10(&mut self, val: super::vals::Add) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); + #[doc = "UART4 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_uart4lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); } - #[doc = "10-bit address header only read direction (master receiver mode)"] - pub const fn head10r(&self) -> super::vals::Headr { - let val = (self.0 >> 12usize) & 0x01; - super::vals::Headr(val as u8) + #[doc = "UART5 Peripheral Clocks Enable During CSleep Mode"] + pub const fn uart5lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { + let val = (self.0 >> 20usize) & 0x01; + super::vals::C1Apb1llpenrTim2lpen(val as u8) } - #[doc = "10-bit address header only read direction (master receiver mode)"] - pub fn set_head10r(&mut self, val: super::vals::Headr) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); + #[doc = "UART5 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_uart5lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize); } - #[doc = "Start generation"] - pub const fn start(&self) -> super::vals::Start { - let val = (self.0 >> 13usize) & 0x01; - super::vals::Start(val as u8) + #[doc = "I2C1 Peripheral Clocks Enable During CSleep Mode"] + pub const fn i2c1lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { + let val = (self.0 >> 21usize) & 0x01; + super::vals::C1Apb1llpenrTim2lpen(val as u8) } - #[doc = "Start generation"] - pub fn set_start(&mut self, val: super::vals::Start) { - self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize); + #[doc = "I2C1 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_i2c1lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); } - #[doc = "Stop generation (master mode)"] - pub const fn stop(&self) -> super::vals::Stop { - let val = (self.0 >> 14usize) & 0x01; - super::vals::Stop(val as u8) + #[doc = "I2C2 Peripheral Clocks Enable During CSleep Mode"] + pub const fn i2c2lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { + let val = (self.0 >> 22usize) & 0x01; + super::vals::C1Apb1llpenrTim2lpen(val as u8) } - #[doc = "Stop generation (master mode)"] - pub fn set_stop(&mut self, val: super::vals::Stop) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); + #[doc = "I2C2 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_i2c2lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); } - #[doc = "NACK generation (slave mode)"] - pub const fn nack(&self) -> super::vals::Nack { - let val = (self.0 >> 15usize) & 0x01; - super::vals::Nack(val as u8) + #[doc = "I2C3 Peripheral Clocks Enable During CSleep Mode"] + pub const fn i2c3lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { + let val = (self.0 >> 23usize) & 0x01; + super::vals::C1Apb1llpenrTim2lpen(val as u8) } - #[doc = "NACK generation (slave mode)"] - pub fn set_nack(&mut self, val: super::vals::Nack) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + #[doc = "I2C3 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_i2c3lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize); } - #[doc = "Number of bytes"] - pub const fn nbytes(&self) -> u8 { - let val = (self.0 >> 16usize) & 0xff; - val as u8 + #[doc = "HDMI-CEC Peripheral Clocks Enable During CSleep Mode"] + pub const fn ceclpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { + let val = (self.0 >> 27usize) & 0x01; + super::vals::C1Apb1llpenrTim2lpen(val as u8) } - #[doc = "Number of bytes"] - pub fn set_nbytes(&mut self, val: u8) { - self.0 = (self.0 & !(0xff << 16usize)) | (((val as u32) & 0xff) << 16usize); + #[doc = "HDMI-CEC Peripheral Clocks Enable During CSleep Mode"] + pub fn set_ceclpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize); } - #[doc = "NBYTES reload mode"] - pub const fn reload(&self) -> super::vals::Reload { - let val = (self.0 >> 24usize) & 0x01; - super::vals::Reload(val as u8) + #[doc = "DAC1/2 peripheral clock enable during CSleep mode"] + pub const fn dac12lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { + let val = (self.0 >> 29usize) & 0x01; + super::vals::C1Apb1llpenrTim2lpen(val as u8) } - #[doc = "NBYTES reload mode"] - pub fn set_reload(&mut self, val: super::vals::Reload) { - self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); + #[doc = "DAC1/2 peripheral clock enable during CSleep mode"] + pub fn set_dac12lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); } - #[doc = "Automatic end mode (master mode)"] - pub const fn autoend(&self) -> super::vals::Autoend { - let val = (self.0 >> 25usize) & 0x01; - super::vals::Autoend(val as u8) + #[doc = "UART7 Peripheral Clocks Enable During CSleep Mode"] + pub const fn uart7lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { + let val = (self.0 >> 30usize) & 0x01; + super::vals::C1Apb1llpenrTim2lpen(val as u8) } - #[doc = "Automatic end mode (master mode)"] - pub fn set_autoend(&mut self, val: super::vals::Autoend) { - self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize); + #[doc = "UART7 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_uart7lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize); } - #[doc = "Packet error checking byte"] - pub const fn pecbyte(&self) -> super::vals::Pecbyte { - let val = (self.0 >> 26usize) & 0x01; - super::vals::Pecbyte(val as u8) + #[doc = "UART8 Peripheral Clocks Enable During CSleep Mode"] + pub const fn uart8lpen(&self) -> super::vals::C1Apb1llpenrTim2lpen { + let val = (self.0 >> 31usize) & 0x01; + super::vals::C1Apb1llpenrTim2lpen(val as u8) } - #[doc = "Packet error checking byte"] - pub fn set_pecbyte(&mut self, val: super::vals::Pecbyte) { - self.0 = (self.0 & !(0x01 << 26usize)) | (((val.0 as u32) & 0x01) << 26usize); + #[doc = "UART8 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_uart8lpen(&mut self, val: super::vals::C1Apb1llpenrTim2lpen) { + self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); } } - impl Default for Cr2 { - fn default() -> Cr2 { - Cr2(0) + impl Default for C1Apb1llpenr { + fn default() -> C1Apb1llpenr { + C1Apb1llpenr(0) } } - #[doc = "Interrupt clear register"] + #[doc = "RCC Backup Domain Control Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Icr(pub u32); - impl Icr { - #[doc = "Address Matched flag clear"] - pub const fn addrcf(&self) -> bool { - let val = (self.0 >> 3usize) & 0x01; - val != 0 + pub struct Bdcr(pub u32); + impl Bdcr { + #[doc = "LSE oscillator enabled"] + pub const fn lseon(&self) -> super::vals::Lseon { + let val = (self.0 >> 0usize) & 0x01; + super::vals::Lseon(val as u8) } - #[doc = "Address Matched flag clear"] - pub fn set_addrcf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); + #[doc = "LSE oscillator enabled"] + pub fn set_lseon(&mut self, val: super::vals::Lseon) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "Not Acknowledge flag clear"] - pub const fn nackcf(&self) -> bool { - let val = (self.0 >> 4usize) & 0x01; + #[doc = "LSE oscillator ready"] + pub const fn lserdy(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; val != 0 } - #[doc = "Not Acknowledge flag clear"] - pub fn set_nackcf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); + #[doc = "LSE oscillator ready"] + pub fn set_lserdy(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - #[doc = "Stop detection flag clear"] - pub const fn stopcf(&self) -> bool { - let val = (self.0 >> 5usize) & 0x01; - val != 0 + #[doc = "LSE oscillator bypass"] + pub const fn lsebyp(&self) -> super::vals::Lsebyp { + let val = (self.0 >> 2usize) & 0x01; + super::vals::Lsebyp(val as u8) } - #[doc = "Stop detection flag clear"] - pub fn set_stopcf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); + #[doc = "LSE oscillator bypass"] + pub fn set_lsebyp(&mut self, val: super::vals::Lsebyp) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); } - #[doc = "Bus error flag clear"] - pub const fn berrcf(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; - val != 0 + #[doc = "LSE oscillator driving capability"] + pub const fn lsedrv(&self) -> super::vals::Lsedrv { + let val = (self.0 >> 3usize) & 0x03; + super::vals::Lsedrv(val as u8) } - #[doc = "Bus error flag clear"] - pub fn set_berrcf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + #[doc = "LSE oscillator driving capability"] + pub fn set_lsedrv(&mut self, val: super::vals::Lsedrv) { + self.0 = (self.0 & !(0x03 << 3usize)) | (((val.0 as u32) & 0x03) << 3usize); } - #[doc = "Arbitration lost flag clear"] - pub const fn arlocf(&self) -> bool { - let val = (self.0 >> 9usize) & 0x01; - val != 0 + #[doc = "LSE clock security system enable"] + pub const fn lsecsson(&self) -> super::vals::Lsecsson { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Lsecsson(val as u8) } - #[doc = "Arbitration lost flag clear"] - pub fn set_arlocf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + #[doc = "LSE clock security system enable"] + pub fn set_lsecsson(&mut self, val: super::vals::Lsecsson) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "Overrun/Underrun flag clear"] - pub const fn ovrcf(&self) -> bool { - let val = (self.0 >> 10usize) & 0x01; + #[doc = "LSE clock security system failure detection"] + pub const fn lsecssd(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; val != 0 } - #[doc = "Overrun/Underrun flag clear"] - pub fn set_ovrcf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); + #[doc = "LSE clock security system failure detection"] + pub fn set_lsecssd(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - #[doc = "PEC Error flag clear"] - pub const fn peccf(&self) -> bool { - let val = (self.0 >> 11usize) & 0x01; - val != 0 + #[doc = "RTC clock source selection"] + pub const fn rtcsel(&self) -> super::vals::Rtcsel { + let val = (self.0 >> 8usize) & 0x03; + super::vals::Rtcsel(val as u8) } - #[doc = "PEC Error flag clear"] - pub fn set_peccf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); + #[doc = "RTC clock source selection"] + pub fn set_rtcsel(&mut self, val: super::vals::Rtcsel) { + self.0 = (self.0 & !(0x03 << 8usize)) | (((val.0 as u32) & 0x03) << 8usize); } - #[doc = "Timeout detection flag clear"] - pub const fn timoutcf(&self) -> bool { - let val = (self.0 >> 12usize) & 0x01; - val != 0 + #[doc = "RTC clock enable"] + pub const fn rtcen(&self) -> super::vals::Rtcen { + let val = (self.0 >> 15usize) & 0x01; + super::vals::Rtcen(val as u8) } - #[doc = "Timeout detection flag clear"] - pub fn set_timoutcf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); + #[doc = "RTC clock enable"] + pub fn set_rtcen(&mut self, val: super::vals::Rtcen) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); } - #[doc = "Alert flag clear"] - pub const fn alertcf(&self) -> bool { - let val = (self.0 >> 13usize) & 0x01; - val != 0 + #[doc = "VSwitch domain software reset"] + pub const fn bdrst(&self) -> super::vals::Bdrst { + let val = (self.0 >> 16usize) & 0x01; + super::vals::Bdrst(val as u8) } - #[doc = "Alert flag clear"] - pub fn set_alertcf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); + #[doc = "VSwitch domain software reset"] + pub fn set_bdrst(&mut self, val: super::vals::Bdrst) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); } } - impl Default for Icr { - fn default() -> Icr { - Icr(0) + impl Default for Bdcr { + fn default() -> Bdcr { + Bdcr(0) } } - #[doc = "Transmit data register"] + #[doc = "RCC Clock Configuration Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Txdr(pub u32); - impl Txdr { - #[doc = "8-bit transmit data"] - pub const fn txdata(&self) -> u8 { - let val = (self.0 >> 0usize) & 0xff; + pub struct Cfgr(pub u32); + impl Cfgr { + #[doc = "System clock switch"] + pub const fn sw(&self) -> super::vals::Sw { + let val = (self.0 >> 0usize) & 0x07; + super::vals::Sw(val as u8) + } + #[doc = "System clock switch"] + pub fn set_sw(&mut self, val: super::vals::Sw) { + self.0 = (self.0 & !(0x07 << 0usize)) | (((val.0 as u32) & 0x07) << 0usize); + } + #[doc = "System clock switch status"] + pub const fn sws(&self) -> u8 { + let val = (self.0 >> 3usize) & 0x07; val as u8 } - #[doc = "8-bit transmit data"] - pub fn set_txdata(&mut self, val: u8) { - self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize); + #[doc = "System clock switch status"] + pub fn set_sws(&mut self, val: u8) { + self.0 = (self.0 & !(0x07 << 3usize)) | (((val as u32) & 0x07) << 3usize); } - } - impl Default for Txdr { - fn default() -> Txdr { - Txdr(0) + #[doc = "System clock selection after a wake up from system Stop"] + pub const fn stopwuck(&self) -> super::vals::Stopwuck { + let val = (self.0 >> 6usize) & 0x01; + super::vals::Stopwuck(val as u8) } - } - #[doc = "Own address register 1"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Oar1(pub u32); - impl Oar1 { - #[doc = "Interface address"] - pub const fn oa1(&self) -> u16 { - let val = (self.0 >> 0usize) & 0x03ff; - val as u16 + #[doc = "System clock selection after a wake up from system Stop"] + pub fn set_stopwuck(&mut self, val: super::vals::Stopwuck) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); } - #[doc = "Interface address"] - pub fn set_oa1(&mut self, val: u16) { - self.0 = (self.0 & !(0x03ff << 0usize)) | (((val as u32) & 0x03ff) << 0usize); + #[doc = "Kernel clock selection after a wake up from system Stop"] + pub const fn stopkerwuck(&self) -> super::vals::Stopwuck { + let val = (self.0 >> 7usize) & 0x01; + super::vals::Stopwuck(val as u8) } - #[doc = "Own Address 1 10-bit mode"] - pub const fn oa1mode(&self) -> super::vals::Oamode { - let val = (self.0 >> 10usize) & 0x01; - super::vals::Oamode(val as u8) + #[doc = "Kernel clock selection after a wake up from system Stop"] + pub fn set_stopkerwuck(&mut self, val: super::vals::Stopwuck) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); } - #[doc = "Own Address 1 10-bit mode"] - pub fn set_oa1mode(&mut self, val: super::vals::Oamode) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); + #[doc = "HSE division factor for RTC clock"] + pub const fn rtcpre(&self) -> u8 { + let val = (self.0 >> 8usize) & 0x3f; + val as u8 + } + #[doc = "HSE division factor for RTC clock"] + pub fn set_rtcpre(&mut self, val: u8) { + self.0 = (self.0 & !(0x3f << 8usize)) | (((val as u32) & 0x3f) << 8usize); + } + #[doc = "High Resolution Timer clock prescaler selection"] + pub const fn hrtimsel(&self) -> super::vals::Hrtimsel { + let val = (self.0 >> 14usize) & 0x01; + super::vals::Hrtimsel(val as u8) + } + #[doc = "High Resolution Timer clock prescaler selection"] + pub fn set_hrtimsel(&mut self, val: super::vals::Hrtimsel) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); + } + #[doc = "Timers clocks prescaler selection"] + pub const fn timpre(&self) -> super::vals::Timpre { + let val = (self.0 >> 15usize) & 0x01; + super::vals::Timpre(val as u8) + } + #[doc = "Timers clocks prescaler selection"] + pub fn set_timpre(&mut self, val: super::vals::Timpre) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + } + #[doc = "MCO1 prescaler"] + pub const fn mco1pre(&self) -> u8 { + let val = (self.0 >> 18usize) & 0x0f; + val as u8 + } + #[doc = "MCO1 prescaler"] + pub fn set_mco1pre(&mut self, val: u8) { + self.0 = (self.0 & !(0x0f << 18usize)) | (((val as u32) & 0x0f) << 18usize); + } + #[doc = "Micro-controller clock output 1"] + pub const fn mco1(&self) -> super::vals::Mco1 { + let val = (self.0 >> 22usize) & 0x07; + super::vals::Mco1(val as u8) + } + #[doc = "Micro-controller clock output 1"] + pub fn set_mco1(&mut self, val: super::vals::Mco1) { + self.0 = (self.0 & !(0x07 << 22usize)) | (((val.0 as u32) & 0x07) << 22usize); + } + #[doc = "MCO2 prescaler"] + pub const fn mco2pre(&self) -> u8 { + let val = (self.0 >> 25usize) & 0x0f; + val as u8 + } + #[doc = "MCO2 prescaler"] + pub fn set_mco2pre(&mut self, val: u8) { + self.0 = (self.0 & !(0x0f << 25usize)) | (((val as u32) & 0x0f) << 25usize); } - #[doc = "Own Address 1 enable"] - pub const fn oa1en(&self) -> bool { - let val = (self.0 >> 15usize) & 0x01; - val != 0 + #[doc = "Micro-controller clock output 2"] + pub const fn mco2(&self) -> super::vals::Mco2 { + let val = (self.0 >> 29usize) & 0x07; + super::vals::Mco2(val as u8) } - #[doc = "Own Address 1 enable"] - pub fn set_oa1en(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); + #[doc = "Micro-controller clock output 2"] + pub fn set_mco2(&mut self, val: super::vals::Mco2) { + self.0 = (self.0 & !(0x07 << 29usize)) | (((val.0 as u32) & 0x07) << 29usize); } } - impl Default for Oar1 { - fn default() -> Oar1 { - Oar1(0) + impl Default for Cfgr { + fn default() -> Cfgr { + Cfgr(0) } } - #[doc = "Interrupt and Status register"] + #[doc = "RCC Reset Status Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Isr(pub u32); - impl Isr { - #[doc = "Transmit data register empty (transmitters)"] - pub const fn txe(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; - val != 0 - } - #[doc = "Transmit data register empty (transmitters)"] - pub fn set_txe(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); - } - #[doc = "Transmit interrupt status (transmitters)"] - pub const fn txis(&self) -> bool { - let val = (self.0 >> 1usize) & 0x01; - val != 0 - } - #[doc = "Transmit interrupt status (transmitters)"] - pub fn set_txis(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); - } - #[doc = "Receive data register not empty (receivers)"] - pub const fn rxne(&self) -> bool { - let val = (self.0 >> 2usize) & 0x01; - val != 0 + pub struct C1Rsr(pub u32); + impl C1Rsr { + #[doc = "Remove reset flag"] + pub const fn rmvf(&self) -> super::vals::C1RsrRmvf { + let val = (self.0 >> 16usize) & 0x01; + super::vals::C1RsrRmvf(val as u8) } - #[doc = "Receive data register not empty (receivers)"] - pub fn set_rxne(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); + #[doc = "Remove reset flag"] + pub fn set_rmvf(&mut self, val: super::vals::C1RsrRmvf) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); } - #[doc = "Address matched (slave mode)"] - pub const fn addr(&self) -> bool { - let val = (self.0 >> 3usize) & 0x01; + #[doc = "CPU reset flag"] + pub const fn cpurstf(&self) -> bool { + let val = (self.0 >> 17usize) & 0x01; val != 0 } - #[doc = "Address matched (slave mode)"] - pub fn set_addr(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); + #[doc = "CPU reset flag"] + pub fn set_cpurstf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); } - #[doc = "Not acknowledge received flag"] - pub const fn nackf(&self) -> bool { - let val = (self.0 >> 4usize) & 0x01; + #[doc = "D1 domain power switch reset flag"] + pub const fn d1rstf(&self) -> bool { + let val = (self.0 >> 19usize) & 0x01; val != 0 } - #[doc = "Not acknowledge received flag"] - pub fn set_nackf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); + #[doc = "D1 domain power switch reset flag"] + pub fn set_d1rstf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize); } - #[doc = "Stop detection flag"] - pub const fn stopf(&self) -> bool { - let val = (self.0 >> 5usize) & 0x01; + #[doc = "D2 domain power switch reset flag"] + pub const fn d2rstf(&self) -> bool { + let val = (self.0 >> 20usize) & 0x01; val != 0 } - #[doc = "Stop detection flag"] - pub fn set_stopf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); + #[doc = "D2 domain power switch reset flag"] + pub fn set_d2rstf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize); } - #[doc = "Transfer Complete (master mode)"] - pub const fn tc(&self) -> bool { - let val = (self.0 >> 6usize) & 0x01; + #[doc = "BOR reset flag"] + pub const fn borrstf(&self) -> bool { + let val = (self.0 >> 21usize) & 0x01; val != 0 } - #[doc = "Transfer Complete (master mode)"] - pub fn set_tc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + #[doc = "BOR reset flag"] + pub fn set_borrstf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); } - #[doc = "Transfer Complete Reload"] - pub const fn tcr(&self) -> bool { - let val = (self.0 >> 7usize) & 0x01; + #[doc = "Pin reset flag (NRST)"] + pub const fn pinrstf(&self) -> bool { + let val = (self.0 >> 22usize) & 0x01; val != 0 } - #[doc = "Transfer Complete Reload"] - pub fn set_tcr(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + #[doc = "Pin reset flag (NRST)"] + pub fn set_pinrstf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); } - #[doc = "Bus error"] - pub const fn berr(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; + #[doc = "POR/PDR reset flag"] + pub const fn porrstf(&self) -> bool { + let val = (self.0 >> 23usize) & 0x01; val != 0 } - #[doc = "Bus error"] - pub fn set_berr(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + #[doc = "POR/PDR reset flag"] + pub fn set_porrstf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize); } - #[doc = "Arbitration lost"] - pub const fn arlo(&self) -> bool { - let val = (self.0 >> 9usize) & 0x01; + #[doc = "System reset from CPU reset flag"] + pub const fn sftrstf(&self) -> bool { + let val = (self.0 >> 24usize) & 0x01; val != 0 } - #[doc = "Arbitration lost"] - pub fn set_arlo(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + #[doc = "System reset from CPU reset flag"] + pub fn set_sftrstf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize); } - #[doc = "Overrun/Underrun (slave mode)"] - pub const fn ovr(&self) -> bool { - let val = (self.0 >> 10usize) & 0x01; + #[doc = "Independent Watchdog reset flag"] + pub const fn iwdg1rstf(&self) -> bool { + let val = (self.0 >> 26usize) & 0x01; val != 0 } - #[doc = "Overrun/Underrun (slave mode)"] - pub fn set_ovr(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); - } - #[doc = "PEC Error in reception"] - pub const fn pecerr(&self) -> super::vals::Pecerr { - let val = (self.0 >> 11usize) & 0x01; - super::vals::Pecerr(val as u8) - } - #[doc = "PEC Error in reception"] - pub fn set_pecerr(&mut self, val: super::vals::Pecerr) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); + #[doc = "Independent Watchdog reset flag"] + pub fn set_iwdg1rstf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); } - #[doc = "Timeout or t_low detection flag"] - pub const fn timeout(&self) -> bool { - let val = (self.0 >> 12usize) & 0x01; + #[doc = "Window Watchdog reset flag"] + pub const fn wwdg1rstf(&self) -> bool { + let val = (self.0 >> 28usize) & 0x01; val != 0 } - #[doc = "Timeout or t_low detection flag"] - pub fn set_timeout(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); + #[doc = "Window Watchdog reset flag"] + pub fn set_wwdg1rstf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize); } - #[doc = "SMBus alert"] - pub const fn alert(&self) -> bool { - let val = (self.0 >> 13usize) & 0x01; + #[doc = "Reset due to illegal D1 DStandby or CPU CStop flag"] + pub const fn lpwrrstf(&self) -> bool { + let val = (self.0 >> 30usize) & 0x01; val != 0 } - #[doc = "SMBus alert"] - pub fn set_alert(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); - } - #[doc = "Bus busy"] - pub const fn busy(&self) -> bool { - let val = (self.0 >> 15usize) & 0x01; - val != 0 + #[doc = "Reset due to illegal D1 DStandby or CPU CStop flag"] + pub fn set_lpwrrstf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 30usize)) | (((val as u32) & 0x01) << 30usize); } - #[doc = "Bus busy"] - pub fn set_busy(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); + } + impl Default for C1Rsr { + fn default() -> C1Rsr { + C1Rsr(0) } - #[doc = "Transfer direction (Slave mode)"] - pub const fn dir(&self) -> super::vals::Dir { - let val = (self.0 >> 16usize) & 0x01; - super::vals::Dir(val as u8) + } + #[doc = "RCC APB1 Clock Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Apb1lenr(pub u32); + impl Apb1lenr { + #[doc = "TIM peripheral clock enable"] + pub const fn tim2en(&self) -> super::vals::Apb1lenrTim2en { + let val = (self.0 >> 0usize) & 0x01; + super::vals::Apb1lenrTim2en(val as u8) } - #[doc = "Transfer direction (Slave mode)"] - pub fn set_dir(&mut self, val: super::vals::Dir) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + #[doc = "TIM peripheral clock enable"] + pub fn set_tim2en(&mut self, val: super::vals::Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "Address match code (Slave mode)"] - pub const fn addcode(&self) -> u8 { - let val = (self.0 >> 17usize) & 0x7f; - val as u8 + #[doc = "TIM peripheral clock enable"] + pub const fn tim3en(&self) -> super::vals::Apb1lenrTim2en { + let val = (self.0 >> 1usize) & 0x01; + super::vals::Apb1lenrTim2en(val as u8) } - #[doc = "Address match code (Slave mode)"] - pub fn set_addcode(&mut self, val: u8) { - self.0 = (self.0 & !(0x7f << 17usize)) | (((val as u32) & 0x7f) << 17usize); + #[doc = "TIM peripheral clock enable"] + pub fn set_tim3en(&mut self, val: super::vals::Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - } - impl Default for Isr { - fn default() -> Isr { - Isr(0) + #[doc = "TIM peripheral clock enable"] + pub const fn tim4en(&self) -> super::vals::Apb1lenrTim2en { + let val = (self.0 >> 2usize) & 0x01; + super::vals::Apb1lenrTim2en(val as u8) } - } - #[doc = "Own address register 2"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Oar2(pub u32); - impl Oar2 { - #[doc = "Interface address"] - pub const fn oa2(&self) -> u8 { - let val = (self.0 >> 1usize) & 0x7f; - val as u8 + #[doc = "TIM peripheral clock enable"] + pub fn set_tim4en(&mut self, val: super::vals::Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); } - #[doc = "Interface address"] - pub fn set_oa2(&mut self, val: u8) { - self.0 = (self.0 & !(0x7f << 1usize)) | (((val as u32) & 0x7f) << 1usize); + #[doc = "TIM peripheral clock enable"] + pub const fn tim5en(&self) -> super::vals::Apb1lenrTim2en { + let val = (self.0 >> 3usize) & 0x01; + super::vals::Apb1lenrTim2en(val as u8) } - #[doc = "Own Address 2 masks"] - pub const fn oa2msk(&self) -> super::vals::Oamsk { - let val = (self.0 >> 8usize) & 0x07; - super::vals::Oamsk(val as u8) + #[doc = "TIM peripheral clock enable"] + pub fn set_tim5en(&mut self, val: super::vals::Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); } - #[doc = "Own Address 2 masks"] - pub fn set_oa2msk(&mut self, val: super::vals::Oamsk) { - self.0 = (self.0 & !(0x07 << 8usize)) | (((val.0 as u32) & 0x07) << 8usize); + #[doc = "TIM peripheral clock enable"] + pub const fn tim6en(&self) -> super::vals::Apb1lenrTim2en { + let val = (self.0 >> 4usize) & 0x01; + super::vals::Apb1lenrTim2en(val as u8) } - #[doc = "Own Address 2 enable"] - pub const fn oa2en(&self) -> bool { - let val = (self.0 >> 15usize) & 0x01; - val != 0 + #[doc = "TIM peripheral clock enable"] + pub fn set_tim6en(&mut self, val: super::vals::Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); } - #[doc = "Own Address 2 enable"] - pub fn set_oa2en(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); + #[doc = "TIM peripheral clock enable"] + pub const fn tim7en(&self) -> super::vals::Apb1lenrTim2en { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Apb1lenrTim2en(val as u8) } - } - impl Default for Oar2 { - fn default() -> Oar2 { - Oar2(0) + #[doc = "TIM peripheral clock enable"] + pub fn set_tim7en(&mut self, val: super::vals::Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - } - #[doc = "Status register 1"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Timeoutr(pub u32); - impl Timeoutr { - #[doc = "Bus timeout A"] - pub const fn timeouta(&self) -> u16 { - let val = (self.0 >> 0usize) & 0x0fff; - val as u16 + #[doc = "TIM peripheral clock enable"] + pub const fn tim12en(&self) -> super::vals::Apb1lenrTim2en { + let val = (self.0 >> 6usize) & 0x01; + super::vals::Apb1lenrTim2en(val as u8) } - #[doc = "Bus timeout A"] - pub fn set_timeouta(&mut self, val: u16) { - self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize); + #[doc = "TIM peripheral clock enable"] + pub fn set_tim12en(&mut self, val: super::vals::Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); } - #[doc = "Idle clock timeout detection"] - pub const fn tidle(&self) -> bool { - let val = (self.0 >> 12usize) & 0x01; - val != 0 + #[doc = "TIM peripheral clock enable"] + pub const fn tim13en(&self) -> super::vals::Apb1lenrTim2en { + let val = (self.0 >> 7usize) & 0x01; + super::vals::Apb1lenrTim2en(val as u8) } - #[doc = "Idle clock timeout detection"] - pub fn set_tidle(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); + #[doc = "TIM peripheral clock enable"] + pub fn set_tim13en(&mut self, val: super::vals::Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); } - #[doc = "Clock timeout enable"] - pub const fn timouten(&self) -> bool { - let val = (self.0 >> 15usize) & 0x01; - val != 0 + #[doc = "TIM peripheral clock enable"] + pub const fn tim14en(&self) -> super::vals::Apb1lenrTim2en { + let val = (self.0 >> 8usize) & 0x01; + super::vals::Apb1lenrTim2en(val as u8) } - #[doc = "Clock timeout enable"] - pub fn set_timouten(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); + #[doc = "TIM peripheral clock enable"] + pub fn set_tim14en(&mut self, val: super::vals::Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); } - #[doc = "Bus timeout B"] - pub const fn timeoutb(&self) -> u16 { - let val = (self.0 >> 16usize) & 0x0fff; - val as u16 + #[doc = "LPTIM1 Peripheral Clocks Enable"] + pub const fn lptim1en(&self) -> super::vals::Apb1lenrTim2en { + let val = (self.0 >> 9usize) & 0x01; + super::vals::Apb1lenrTim2en(val as u8) } - #[doc = "Bus timeout B"] - pub fn set_timeoutb(&mut self, val: u16) { - self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize); + #[doc = "LPTIM1 Peripheral Clocks Enable"] + pub fn set_lptim1en(&mut self, val: super::vals::Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); } - #[doc = "Extended clock timeout enable"] - pub const fn texten(&self) -> bool { - let val = (self.0 >> 31usize) & 0x01; - val != 0 + #[doc = "SPI2 Peripheral Clocks Enable"] + pub const fn spi2en(&self) -> super::vals::Apb1lenrTim2en { + let val = (self.0 >> 14usize) & 0x01; + super::vals::Apb1lenrTim2en(val as u8) } - #[doc = "Extended clock timeout enable"] - pub fn set_texten(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize); + #[doc = "SPI2 Peripheral Clocks Enable"] + pub fn set_spi2en(&mut self, val: super::vals::Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); } - } - impl Default for Timeoutr { - fn default() -> Timeoutr { - Timeoutr(0) + #[doc = "SPI3 Peripheral Clocks Enable"] + pub const fn spi3en(&self) -> super::vals::Apb1lenrTim2en { + let val = (self.0 >> 15usize) & 0x01; + super::vals::Apb1lenrTim2en(val as u8) + } + #[doc = "SPI3 Peripheral Clocks Enable"] + pub fn set_spi3en(&mut self, val: super::vals::Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + } + #[doc = "SPDIFRX Peripheral Clocks Enable"] + pub const fn spdifrxen(&self) -> super::vals::Apb1lenrTim2en { + let val = (self.0 >> 16usize) & 0x01; + super::vals::Apb1lenrTim2en(val as u8) + } + #[doc = "SPDIFRX Peripheral Clocks Enable"] + pub fn set_spdifrxen(&mut self, val: super::vals::Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + } + #[doc = "USART2 Peripheral Clocks Enable"] + pub const fn usart2en(&self) -> super::vals::Apb1lenrTim2en { + let val = (self.0 >> 17usize) & 0x01; + super::vals::Apb1lenrTim2en(val as u8) + } + #[doc = "USART2 Peripheral Clocks Enable"] + pub fn set_usart2en(&mut self, val: super::vals::Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); + } + #[doc = "USART3 Peripheral Clocks Enable"] + pub const fn usart3en(&self) -> super::vals::Apb1lenrTim2en { + let val = (self.0 >> 18usize) & 0x01; + super::vals::Apb1lenrTim2en(val as u8) + } + #[doc = "USART3 Peripheral Clocks Enable"] + pub fn set_usart3en(&mut self, val: super::vals::Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); + } + #[doc = "UART4 Peripheral Clocks Enable"] + pub const fn uart4en(&self) -> super::vals::Apb1lenrTim2en { + let val = (self.0 >> 19usize) & 0x01; + super::vals::Apb1lenrTim2en(val as u8) + } + #[doc = "UART4 Peripheral Clocks Enable"] + pub fn set_uart4en(&mut self, val: super::vals::Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); + } + #[doc = "UART5 Peripheral Clocks Enable"] + pub const fn uart5en(&self) -> super::vals::Apb1lenrTim2en { + let val = (self.0 >> 20usize) & 0x01; + super::vals::Apb1lenrTim2en(val as u8) + } + #[doc = "UART5 Peripheral Clocks Enable"] + pub fn set_uart5en(&mut self, val: super::vals::Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize); + } + #[doc = "I2C1 Peripheral Clocks Enable"] + pub const fn i2c1en(&self) -> super::vals::Apb1lenrTim2en { + let val = (self.0 >> 21usize) & 0x01; + super::vals::Apb1lenrTim2en(val as u8) + } + #[doc = "I2C1 Peripheral Clocks Enable"] + pub fn set_i2c1en(&mut self, val: super::vals::Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); + } + #[doc = "I2C2 Peripheral Clocks Enable"] + pub const fn i2c2en(&self) -> super::vals::Apb1lenrTim2en { + let val = (self.0 >> 22usize) & 0x01; + super::vals::Apb1lenrTim2en(val as u8) + } + #[doc = "I2C2 Peripheral Clocks Enable"] + pub fn set_i2c2en(&mut self, val: super::vals::Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); + } + #[doc = "I2C3 Peripheral Clocks Enable"] + pub const fn i2c3en(&self) -> super::vals::Apb1lenrTim2en { + let val = (self.0 >> 23usize) & 0x01; + super::vals::Apb1lenrTim2en(val as u8) + } + #[doc = "I2C3 Peripheral Clocks Enable"] + pub fn set_i2c3en(&mut self, val: super::vals::Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize); + } + #[doc = "HDMI-CEC peripheral clock enable"] + pub const fn cecen(&self) -> super::vals::Apb1lenrTim2en { + let val = (self.0 >> 27usize) & 0x01; + super::vals::Apb1lenrTim2en(val as u8) + } + #[doc = "HDMI-CEC peripheral clock enable"] + pub fn set_cecen(&mut self, val: super::vals::Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize); + } + #[doc = "DAC1&2 peripheral clock enable"] + pub const fn dac12en(&self) -> super::vals::Apb1lenrTim2en { + let val = (self.0 >> 29usize) & 0x01; + super::vals::Apb1lenrTim2en(val as u8) + } + #[doc = "DAC1&2 peripheral clock enable"] + pub fn set_dac12en(&mut self, val: super::vals::Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); + } + #[doc = "UART7 Peripheral Clocks Enable"] + pub const fn uart7en(&self) -> super::vals::Apb1lenrTim2en { + let val = (self.0 >> 30usize) & 0x01; + super::vals::Apb1lenrTim2en(val as u8) + } + #[doc = "UART7 Peripheral Clocks Enable"] + pub fn set_uart7en(&mut self, val: super::vals::Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize); + } + #[doc = "UART8 Peripheral Clocks Enable"] + pub const fn uart8en(&self) -> super::vals::Apb1lenrTim2en { + let val = (self.0 >> 31usize) & 0x01; + super::vals::Apb1lenrTim2en(val as u8) + } + #[doc = "UART8 Peripheral Clocks Enable"] + pub fn set_uart8en(&mut self, val: super::vals::Apb1lenrTim2en) { + self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); } } - } - pub mod vals { - use crate::generic::*; - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Headr(pub u8); - impl Headr { - #[doc = "The master sends the complete 10 bit slave address read sequence"] - pub const COMPLETE: Self = Self(0); - #[doc = "The master only sends the 1st 7 bits of the 10 bit address, followed by Read direction"] - pub const PARTIAL: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Stop(pub u8); - impl Stop { - #[doc = "No Stop generation"] - pub const NOSTOP: Self = Self(0); - #[doc = "Stop generation after current byte transfer"] - pub const STOP: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Autoend(pub u8); - impl Autoend { - #[doc = "Software end mode: TC flag is set when NBYTES data are transferred, stretching SCL low"] - pub const SOFTWARE: Self = Self(0); - #[doc = "Automatic end mode: a STOP condition is automatically sent when NBYTES data are transferred"] - pub const AUTOMATIC: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Start(pub u8); - impl Start { - #[doc = "No Start generation"] - pub const NOSTART: Self = Self(0); - #[doc = "Restart/Start generation"] - pub const START: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Nack(pub u8); - impl Nack { - #[doc = "an ACK is sent after current received byte"] - pub const ACK: Self = Self(0); - #[doc = "a NACK is sent after current received byte"] - pub const NACK: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct RdWrn(pub u8); - impl RdWrn { - #[doc = "Master requests a write transfer"] - pub const WRITE: Self = Self(0); - #[doc = "Master requests a read transfer"] - pub const READ: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Pecerr(pub u8); - impl Pecerr { - #[doc = "Received PEC does match with PEC register"] - pub const MATCH: Self = Self(0); - #[doc = "Received PEC does not match with PEC register"] - pub const NOMATCH: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Dnf(pub u8); - impl Dnf { - #[doc = "Digital filter disabled"] - pub const NOFILTER: Self = Self(0); - #[doc = "Digital filter enabled and filtering capability up to 1 tI2CCLK"] - pub const FILTER1: Self = Self(0x01); - #[doc = "Digital filter enabled and filtering capability up to 2 tI2CCLK"] - pub const FILTER2: Self = Self(0x02); - #[doc = "Digital filter enabled and filtering capability up to 3 tI2CCLK"] - pub const FILTER3: Self = Self(0x03); - #[doc = "Digital filter enabled and filtering capability up to 4 tI2CCLK"] - pub const FILTER4: Self = Self(0x04); - #[doc = "Digital filter enabled and filtering capability up to 5 tI2CCLK"] - pub const FILTER5: Self = Self(0x05); - #[doc = "Digital filter enabled and filtering capability up to 6 tI2CCLK"] - pub const FILTER6: Self = Self(0x06); - #[doc = "Digital filter enabled and filtering capability up to 7 tI2CCLK"] - pub const FILTER7: Self = Self(0x07); - #[doc = "Digital filter enabled and filtering capability up to 8 tI2CCLK"] - pub const FILTER8: Self = Self(0x08); - #[doc = "Digital filter enabled and filtering capability up to 9 tI2CCLK"] - pub const FILTER9: Self = Self(0x09); - #[doc = "Digital filter enabled and filtering capability up to 10 tI2CCLK"] - pub const FILTER10: Self = Self(0x0a); - #[doc = "Digital filter enabled and filtering capability up to 11 tI2CCLK"] - pub const FILTER11: Self = Self(0x0b); - #[doc = "Digital filter enabled and filtering capability up to 12 tI2CCLK"] - pub const FILTER12: Self = Self(0x0c); - #[doc = "Digital filter enabled and filtering capability up to 13 tI2CCLK"] - pub const FILTER13: Self = Self(0x0d); - #[doc = "Digital filter enabled and filtering capability up to 14 tI2CCLK"] - pub const FILTER14: Self = Self(0x0e); - #[doc = "Digital filter enabled and filtering capability up to 15 tI2CCLK"] - pub const FILTER15: Self = Self(0x0f); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Dir(pub u8); - impl Dir { - #[doc = "Write transfer, slave enters receiver mode"] - pub const WRITE: Self = Self(0); - #[doc = "Read transfer, slave enters transmitter mode"] - pub const READ: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Oamode(pub u8); - impl Oamode { - #[doc = "Own address 1 is a 7-bit address"] - pub const BIT7: Self = Self(0); - #[doc = "Own address 1 is a 10-bit address"] - pub const BIT10: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Reload(pub u8); - impl Reload { - #[doc = "The transfer is completed after the NBYTES data transfer (STOP or RESTART will follow)"] - pub const COMPLETED: Self = Self(0); - #[doc = "The transfer is not completed after the NBYTES data transfer (NBYTES will be reloaded)"] - pub const NOTCOMPLETED: Self = Self(0x01); + impl Default for Apb1lenr { + fn default() -> Apb1lenr { + Apb1lenr(0) + } } + #[doc = "RCC Global Control Register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Add(pub u8); - impl Add { - #[doc = "The master operates in 7-bit addressing mode"] - pub const BIT7: Self = Self(0); - #[doc = "The master operates in 10-bit addressing mode"] - pub const BIT10: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Gcr(pub u32); + impl Gcr { + #[doc = "WWDG1 reset scope control"] + pub const fn ww1rsc(&self) -> super::vals::Ww1rsc { + let val = (self.0 >> 0usize) & 0x01; + super::vals::Ww1rsc(val as u8) + } + #[doc = "WWDG1 reset scope control"] + pub fn set_ww1rsc(&mut self, val: super::vals::Ww1rsc) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Oamsk(pub u8); - impl Oamsk { - #[doc = "No mask"] - pub const NOMASK: Self = Self(0); - #[doc = "OA2[1] -is masked and don’t care. Only OA2[7:2] -are compared"] - pub const MASK1: Self = Self(0x01); - #[doc = "OA2[2:1] -are masked and don’t care. Only OA2[7:3] -are compared"] - pub const MASK2: Self = Self(0x02); - #[doc = "OA2[3:1] -are masked and don’t care. Only OA2[7:4] -are compared"] - pub const MASK3: Self = Self(0x03); - #[doc = "OA2[4:1] -are masked and don’t care. Only OA2[7:5] -are compared"] - pub const MASK4: Self = Self(0x04); - #[doc = "OA2[5:1] -are masked and don’t care. Only OA2[7:6] -are compared"] - pub const MASK5: Self = Self(0x05); - #[doc = "OA2[6:1] -are masked and don’t care. Only OA2[7] -is compared."] - pub const MASK6: Self = Self(0x06); - #[doc = "OA2[7:1] -are masked and don’t care. No comparison is done, and all (except reserved) 7-bit received addresses are acknowledged"] - pub const MASK7: Self = Self(0x07); + impl Default for Gcr { + fn default() -> Gcr { + Gcr(0) + } } + #[doc = "RCC APB4 Sleep Clock Register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Pecbyte(pub u8); - impl Pecbyte { - #[doc = "No PEC transfer"] - pub const NOPEC: Self = Self(0); - #[doc = "PEC transmission/reception is requested"] - pub const PEC: Self = Self(0x01); - } - } -} -pub mod sdmmc_v2 { - use crate::generic::*; - #[doc = "SDMMC"] - #[derive(Copy, Clone)] - pub struct Sdmmc(pub *mut u8); - unsafe impl Send for Sdmmc {} - unsafe impl Sync for Sdmmc {} - impl Sdmmc { - #[doc = "SDMMC power control register"] - pub fn power(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(0usize)) } - } - #[doc = "The SDMMC_CLKCR register controls the SDMMC_CK output clock, the SDMMC_RX_CLK receive clock, and the bus width."] - pub fn clkcr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(4usize)) } - } - #[doc = "The SDMMC_ARGR register contains a 32-bit command argument, which is sent to a card as part of a command message."] - pub fn argr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(8usize)) } - } - #[doc = "The SDMMC_CMDR register contains the command index and command type bits. The command index is sent to a card as part of a command message. The command type bits control the command path state machine (CPSM)."] - pub fn cmdr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(12usize)) } - } - #[doc = "SDMMC command response register"] - pub fn respcmdr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(16usize)) } - } - #[doc = "The SDMMC_RESP1/2/3/4R registers contain the status of a card, which is part of the received response."] - pub fn respr(self, n: usize) -> Reg { - assert!(n < 4usize); - unsafe { Reg::from_ptr(self.0.add(20usize + n * 4usize)) } + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct C1Apb4lpenr(pub u32); + impl C1Apb4lpenr { + #[doc = "SYSCFG peripheral clock enable during CSleep mode"] + pub const fn syscfglpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen { + let val = (self.0 >> 1usize) & 0x01; + super::vals::C1Apb4lpenrSyscfglpen(val as u8) + } + #[doc = "SYSCFG peripheral clock enable during CSleep mode"] + pub fn set_syscfglpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + } + #[doc = "LPUART1 Peripheral Clocks Enable During CSleep Mode"] + pub const fn lpuart1lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen { + let val = (self.0 >> 3usize) & 0x01; + super::vals::C1Apb4lpenrSyscfglpen(val as u8) + } + #[doc = "LPUART1 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_lpuart1lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); + } + #[doc = "SPI6 Peripheral Clocks Enable During CSleep Mode"] + pub const fn spi6lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen { + let val = (self.0 >> 5usize) & 0x01; + super::vals::C1Apb4lpenrSyscfglpen(val as u8) + } + #[doc = "SPI6 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_spi6lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + } + #[doc = "I2C4 Peripheral Clocks Enable During CSleep Mode"] + pub const fn i2c4lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen { + let val = (self.0 >> 7usize) & 0x01; + super::vals::C1Apb4lpenrSyscfglpen(val as u8) + } + #[doc = "I2C4 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_i2c4lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); + } + #[doc = "LPTIM2 Peripheral Clocks Enable During CSleep Mode"] + pub const fn lptim2lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen { + let val = (self.0 >> 9usize) & 0x01; + super::vals::C1Apb4lpenrSyscfglpen(val as u8) + } + #[doc = "LPTIM2 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_lptim2lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + } + #[doc = "LPTIM3 Peripheral Clocks Enable During CSleep Mode"] + pub const fn lptim3lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen { + let val = (self.0 >> 10usize) & 0x01; + super::vals::C1Apb4lpenrSyscfglpen(val as u8) + } + #[doc = "LPTIM3 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_lptim3lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); + } + #[doc = "LPTIM4 Peripheral Clocks Enable During CSleep Mode"] + pub const fn lptim4lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen { + let val = (self.0 >> 11usize) & 0x01; + super::vals::C1Apb4lpenrSyscfglpen(val as u8) + } + #[doc = "LPTIM4 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_lptim4lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); + } + #[doc = "LPTIM5 Peripheral Clocks Enable During CSleep Mode"] + pub const fn lptim5lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen { + let val = (self.0 >> 12usize) & 0x01; + super::vals::C1Apb4lpenrSyscfglpen(val as u8) + } + #[doc = "LPTIM5 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_lptim5lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); + } + #[doc = "COMP1/2 peripheral clock enable during CSleep mode"] + pub const fn comp12lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen { + let val = (self.0 >> 14usize) & 0x01; + super::vals::C1Apb4lpenrSyscfglpen(val as u8) + } + #[doc = "COMP1/2 peripheral clock enable during CSleep mode"] + pub fn set_comp12lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); + } + #[doc = "VREF peripheral clock enable during CSleep mode"] + pub const fn vreflpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen { + let val = (self.0 >> 15usize) & 0x01; + super::vals::C1Apb4lpenrSyscfglpen(val as u8) + } + #[doc = "VREF peripheral clock enable during CSleep mode"] + pub fn set_vreflpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + } + #[doc = "RTC APB Clock Enable During CSleep Mode"] + pub const fn rtcapblpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen { + let val = (self.0 >> 16usize) & 0x01; + super::vals::C1Apb4lpenrSyscfglpen(val as u8) + } + #[doc = "RTC APB Clock Enable During CSleep Mode"] + pub fn set_rtcapblpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + } + #[doc = "SAI4 Peripheral Clocks Enable During CSleep Mode"] + pub const fn sai4lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen { + let val = (self.0 >> 21usize) & 0x01; + super::vals::C1Apb4lpenrSyscfglpen(val as u8) + } + #[doc = "SAI4 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_sai4lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); + } } - #[doc = "The SDMMC_DTIMER register contains the data timeout period, in card bus clock periods. A counter loads the value from the SDMMC_DTIMER register, and starts decrementing when the data path state machine (DPSM) enters the Wait_R or Busy state. If the timer reaches 0 while the DPSM is in either of these states, the timeout status flag is set."] - pub fn dtimer(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(36usize)) } + impl Default for C1Apb4lpenr { + fn default() -> C1Apb4lpenr { + C1Apb4lpenr(0) + } } - #[doc = "The SDMMC_DLENR register contains the number of data bytes to be transferred. The value is loaded into the data counter when data transfer starts."] - pub fn dlenr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(40usize)) } + #[doc = "RCC APB2 Clock Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct C1Apb2enr(pub u32); + impl C1Apb2enr { + #[doc = "TIM1 peripheral clock enable"] + pub const fn tim1en(&self) -> super::vals::C1Apb2enrTim1en { + let val = (self.0 >> 0usize) & 0x01; + super::vals::C1Apb2enrTim1en(val as u8) + } + #[doc = "TIM1 peripheral clock enable"] + pub fn set_tim1en(&mut self, val: super::vals::C1Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + } + #[doc = "TIM8 peripheral clock enable"] + pub const fn tim8en(&self) -> super::vals::C1Apb2enrTim1en { + let val = (self.0 >> 1usize) & 0x01; + super::vals::C1Apb2enrTim1en(val as u8) + } + #[doc = "TIM8 peripheral clock enable"] + pub fn set_tim8en(&mut self, val: super::vals::C1Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + } + #[doc = "USART1 Peripheral Clocks Enable"] + pub const fn usart1en(&self) -> super::vals::C1Apb2enrTim1en { + let val = (self.0 >> 4usize) & 0x01; + super::vals::C1Apb2enrTim1en(val as u8) + } + #[doc = "USART1 Peripheral Clocks Enable"] + pub fn set_usart1en(&mut self, val: super::vals::C1Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + } + #[doc = "USART6 Peripheral Clocks Enable"] + pub const fn usart6en(&self) -> super::vals::C1Apb2enrTim1en { + let val = (self.0 >> 5usize) & 0x01; + super::vals::C1Apb2enrTim1en(val as u8) + } + #[doc = "USART6 Peripheral Clocks Enable"] + pub fn set_usart6en(&mut self, val: super::vals::C1Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + } + #[doc = "SPI1 Peripheral Clocks Enable"] + pub const fn spi1en(&self) -> super::vals::C1Apb2enrTim1en { + let val = (self.0 >> 12usize) & 0x01; + super::vals::C1Apb2enrTim1en(val as u8) + } + #[doc = "SPI1 Peripheral Clocks Enable"] + pub fn set_spi1en(&mut self, val: super::vals::C1Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); + } + #[doc = "SPI4 Peripheral Clocks Enable"] + pub const fn spi4en(&self) -> super::vals::C1Apb2enrTim1en { + let val = (self.0 >> 13usize) & 0x01; + super::vals::C1Apb2enrTim1en(val as u8) + } + #[doc = "SPI4 Peripheral Clocks Enable"] + pub fn set_spi4en(&mut self, val: super::vals::C1Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize); + } + #[doc = "TIM15 peripheral clock enable"] + pub const fn tim15en(&self) -> super::vals::C1Apb2enrTim1en { + let val = (self.0 >> 16usize) & 0x01; + super::vals::C1Apb2enrTim1en(val as u8) + } + #[doc = "TIM15 peripheral clock enable"] + pub fn set_tim15en(&mut self, val: super::vals::C1Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + } + #[doc = "TIM16 peripheral clock enable"] + pub const fn tim16en(&self) -> super::vals::C1Apb2enrTim1en { + let val = (self.0 >> 17usize) & 0x01; + super::vals::C1Apb2enrTim1en(val as u8) + } + #[doc = "TIM16 peripheral clock enable"] + pub fn set_tim16en(&mut self, val: super::vals::C1Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); + } + #[doc = "TIM17 peripheral clock enable"] + pub const fn tim17en(&self) -> super::vals::C1Apb2enrTim1en { + let val = (self.0 >> 18usize) & 0x01; + super::vals::C1Apb2enrTim1en(val as u8) + } + #[doc = "TIM17 peripheral clock enable"] + pub fn set_tim17en(&mut self, val: super::vals::C1Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); + } + #[doc = "SPI5 Peripheral Clocks Enable"] + pub const fn spi5en(&self) -> super::vals::C1Apb2enrTim1en { + let val = (self.0 >> 20usize) & 0x01; + super::vals::C1Apb2enrTim1en(val as u8) + } + #[doc = "SPI5 Peripheral Clocks Enable"] + pub fn set_spi5en(&mut self, val: super::vals::C1Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize); + } + #[doc = "SAI1 Peripheral Clocks Enable"] + pub const fn sai1en(&self) -> super::vals::C1Apb2enrTim1en { + let val = (self.0 >> 22usize) & 0x01; + super::vals::C1Apb2enrTim1en(val as u8) + } + #[doc = "SAI1 Peripheral Clocks Enable"] + pub fn set_sai1en(&mut self, val: super::vals::C1Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); + } + #[doc = "SAI2 Peripheral Clocks Enable"] + pub const fn sai2en(&self) -> super::vals::C1Apb2enrTim1en { + let val = (self.0 >> 23usize) & 0x01; + super::vals::C1Apb2enrTim1en(val as u8) + } + #[doc = "SAI2 Peripheral Clocks Enable"] + pub fn set_sai2en(&mut self, val: super::vals::C1Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize); + } + #[doc = "SAI3 Peripheral Clocks Enable"] + pub const fn sai3en(&self) -> super::vals::C1Apb2enrTim1en { + let val = (self.0 >> 24usize) & 0x01; + super::vals::C1Apb2enrTim1en(val as u8) + } + #[doc = "SAI3 Peripheral Clocks Enable"] + pub fn set_sai3en(&mut self, val: super::vals::C1Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); + } + #[doc = "DFSDM1 Peripheral Clocks Enable"] + pub const fn dfsdm1en(&self) -> super::vals::C1Apb2enrTim1en { + let val = (self.0 >> 28usize) & 0x01; + super::vals::C1Apb2enrTim1en(val as u8) + } + #[doc = "DFSDM1 Peripheral Clocks Enable"] + pub fn set_dfsdm1en(&mut self, val: super::vals::C1Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); + } + #[doc = "HRTIM peripheral clock enable"] + pub const fn hrtimen(&self) -> super::vals::C1Apb2enrTim1en { + let val = (self.0 >> 29usize) & 0x01; + super::vals::C1Apb2enrTim1en(val as u8) + } + #[doc = "HRTIM peripheral clock enable"] + pub fn set_hrtimen(&mut self, val: super::vals::C1Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); + } } - #[doc = "The SDMMC_DCTRL register control the data path state machine (DPSM)."] - pub fn dctrl(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(44usize)) } + impl Default for C1Apb2enr { + fn default() -> C1Apb2enr { + C1Apb2enr(0) + } } - #[doc = "The SDMMC_DCNTR register loads the value from the data length register (see SDMMC_DLENR) when the DPSM moves from the Idle state to the Wait_R or Wait_S state. As data is transferred, the counter decrements the value until it reaches 0. The DPSM then moves to the Idle state and when there has been no error, the data status end flag (DATAEND) is set."] - pub fn dcntr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(48usize)) } + #[doc = "RCC APB1 Clock Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct C1Apb1henr(pub u32); + impl C1Apb1henr { + #[doc = "Clock Recovery System peripheral clock enable"] + pub const fn crsen(&self) -> super::vals::C1Apb1henrCrsen { + let val = (self.0 >> 1usize) & 0x01; + super::vals::C1Apb1henrCrsen(val as u8) + } + #[doc = "Clock Recovery System peripheral clock enable"] + pub fn set_crsen(&mut self, val: super::vals::C1Apb1henrCrsen) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + } + #[doc = "SWPMI Peripheral Clocks Enable"] + pub const fn swpen(&self) -> super::vals::C1Apb1henrCrsen { + let val = (self.0 >> 2usize) & 0x01; + super::vals::C1Apb1henrCrsen(val as u8) + } + #[doc = "SWPMI Peripheral Clocks Enable"] + pub fn set_swpen(&mut self, val: super::vals::C1Apb1henrCrsen) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); + } + #[doc = "OPAMP peripheral clock enable"] + pub const fn opampen(&self) -> super::vals::C1Apb1henrCrsen { + let val = (self.0 >> 4usize) & 0x01; + super::vals::C1Apb1henrCrsen(val as u8) + } + #[doc = "OPAMP peripheral clock enable"] + pub fn set_opampen(&mut self, val: super::vals::C1Apb1henrCrsen) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + } + #[doc = "MDIOS peripheral clock enable"] + pub const fn mdiosen(&self) -> super::vals::C1Apb1henrCrsen { + let val = (self.0 >> 5usize) & 0x01; + super::vals::C1Apb1henrCrsen(val as u8) + } + #[doc = "MDIOS peripheral clock enable"] + pub fn set_mdiosen(&mut self, val: super::vals::C1Apb1henrCrsen) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + } + #[doc = "FDCAN Peripheral Clocks Enable"] + pub const fn fdcanen(&self) -> super::vals::C1Apb1henrCrsen { + let val = (self.0 >> 8usize) & 0x01; + super::vals::C1Apb1henrCrsen(val as u8) + } + #[doc = "FDCAN Peripheral Clocks Enable"] + pub fn set_fdcanen(&mut self, val: super::vals::C1Apb1henrCrsen) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); + } } - #[doc = "The SDMMC_STAR register is a read-only register. It contains two types of flag:Static flags (bits [29,21,11:0]): these bits remain asserted until they are cleared by writing to the SDMMC interrupt Clear register (see SDMMC_ICR)Dynamic flags (bits [20:12]): these bits change state depending on the state of the underlying logic (for example, FIFO full and empty flags are asserted and de-asserted as data while written to the FIFO)"] - pub fn star(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(52usize)) } + impl Default for C1Apb1henr { + fn default() -> C1Apb1henr { + C1Apb1henr(0) + } } - #[doc = "The SDMMC_ICR register is a write-only register. Writing a bit with 1 clears the corresponding bit in the SDMMC_STAR status register."] - pub fn icr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(56usize)) } + #[doc = "RCC APB3 Peripheral Reset Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Apb3rstr(pub u32); + impl Apb3rstr { + #[doc = "LTDC block reset"] + pub const fn ltdcrst(&self) -> super::vals::Ltdcrst { + let val = (self.0 >> 3usize) & 0x01; + super::vals::Ltdcrst(val as u8) + } + #[doc = "LTDC block reset"] + pub fn set_ltdcrst(&mut self, val: super::vals::Ltdcrst) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); + } } - #[doc = "The interrupt mask register determines which status flags generate an interrupt request by setting the corresponding bit to 1."] - pub fn maskr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(60usize)) } + impl Default for Apb3rstr { + fn default() -> Apb3rstr { + Apb3rstr(0) + } } - #[doc = "The SDMMC_ACKTIMER register contains the acknowledgment timeout period, in SDMMC_CK bus clock periods. A counter loads the value from the SDMMC_ACKTIMER register, and starts decrementing when the data path state machine (DPSM) enters the Wait_Ack state. If the timer reaches 0 while the DPSM is in this states, the acknowledgment timeout status flag is set."] - pub fn acktimer(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(64usize)) } + #[doc = "RCC APB2 Peripheral Reset Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Apb2rstr(pub u32); + impl Apb2rstr { + #[doc = "TIM1 block reset"] + pub const fn tim1rst(&self) -> super::vals::Tim1rst { + let val = (self.0 >> 0usize) & 0x01; + super::vals::Tim1rst(val as u8) + } + #[doc = "TIM1 block reset"] + pub fn set_tim1rst(&mut self, val: super::vals::Tim1rst) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + } + #[doc = "TIM8 block reset"] + pub const fn tim8rst(&self) -> super::vals::Tim1rst { + let val = (self.0 >> 1usize) & 0x01; + super::vals::Tim1rst(val as u8) + } + #[doc = "TIM8 block reset"] + pub fn set_tim8rst(&mut self, val: super::vals::Tim1rst) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + } + #[doc = "USART1 block reset"] + pub const fn usart1rst(&self) -> super::vals::Tim1rst { + let val = (self.0 >> 4usize) & 0x01; + super::vals::Tim1rst(val as u8) + } + #[doc = "USART1 block reset"] + pub fn set_usart1rst(&mut self, val: super::vals::Tim1rst) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + } + #[doc = "USART6 block reset"] + pub const fn usart6rst(&self) -> super::vals::Tim1rst { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Tim1rst(val as u8) + } + #[doc = "USART6 block reset"] + pub fn set_usart6rst(&mut self, val: super::vals::Tim1rst) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + } + #[doc = "SPI1 block reset"] + pub const fn spi1rst(&self) -> super::vals::Tim1rst { + let val = (self.0 >> 12usize) & 0x01; + super::vals::Tim1rst(val as u8) + } + #[doc = "SPI1 block reset"] + pub fn set_spi1rst(&mut self, val: super::vals::Tim1rst) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); + } + #[doc = "SPI4 block reset"] + pub const fn spi4rst(&self) -> super::vals::Tim1rst { + let val = (self.0 >> 13usize) & 0x01; + super::vals::Tim1rst(val as u8) + } + #[doc = "SPI4 block reset"] + pub fn set_spi4rst(&mut self, val: super::vals::Tim1rst) { + self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize); + } + #[doc = "TIM15 block reset"] + pub const fn tim15rst(&self) -> super::vals::Tim1rst { + let val = (self.0 >> 16usize) & 0x01; + super::vals::Tim1rst(val as u8) + } + #[doc = "TIM15 block reset"] + pub fn set_tim15rst(&mut self, val: super::vals::Tim1rst) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + } + #[doc = "TIM16 block reset"] + pub const fn tim16rst(&self) -> super::vals::Tim1rst { + let val = (self.0 >> 17usize) & 0x01; + super::vals::Tim1rst(val as u8) + } + #[doc = "TIM16 block reset"] + pub fn set_tim16rst(&mut self, val: super::vals::Tim1rst) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); + } + #[doc = "TIM17 block reset"] + pub const fn tim17rst(&self) -> super::vals::Tim1rst { + let val = (self.0 >> 18usize) & 0x01; + super::vals::Tim1rst(val as u8) + } + #[doc = "TIM17 block reset"] + pub fn set_tim17rst(&mut self, val: super::vals::Tim1rst) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); + } + #[doc = "SPI5 block reset"] + pub const fn spi5rst(&self) -> super::vals::Tim1rst { + let val = (self.0 >> 20usize) & 0x01; + super::vals::Tim1rst(val as u8) + } + #[doc = "SPI5 block reset"] + pub fn set_spi5rst(&mut self, val: super::vals::Tim1rst) { + self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize); + } + #[doc = "SAI1 block reset"] + pub const fn sai1rst(&self) -> super::vals::Tim1rst { + let val = (self.0 >> 22usize) & 0x01; + super::vals::Tim1rst(val as u8) + } + #[doc = "SAI1 block reset"] + pub fn set_sai1rst(&mut self, val: super::vals::Tim1rst) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); + } + #[doc = "SAI2 block reset"] + pub const fn sai2rst(&self) -> super::vals::Tim1rst { + let val = (self.0 >> 23usize) & 0x01; + super::vals::Tim1rst(val as u8) + } + #[doc = "SAI2 block reset"] + pub fn set_sai2rst(&mut self, val: super::vals::Tim1rst) { + self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize); + } + #[doc = "SAI3 block reset"] + pub const fn sai3rst(&self) -> super::vals::Tim1rst { + let val = (self.0 >> 24usize) & 0x01; + super::vals::Tim1rst(val as u8) + } + #[doc = "SAI3 block reset"] + pub fn set_sai3rst(&mut self, val: super::vals::Tim1rst) { + self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); + } + #[doc = "DFSDM1 block reset"] + pub const fn dfsdm1rst(&self) -> super::vals::Tim1rst { + let val = (self.0 >> 28usize) & 0x01; + super::vals::Tim1rst(val as u8) + } + #[doc = "DFSDM1 block reset"] + pub fn set_dfsdm1rst(&mut self, val: super::vals::Tim1rst) { + self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); + } + #[doc = "HRTIM block reset"] + pub const fn hrtimrst(&self) -> super::vals::Tim1rst { + let val = (self.0 >> 29usize) & 0x01; + super::vals::Tim1rst(val as u8) + } + #[doc = "HRTIM block reset"] + pub fn set_hrtimrst(&mut self, val: super::vals::Tim1rst) { + self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); + } } - #[doc = "The receive and transmit FIFOs can be read or written as 32-bit wide registers. The FIFOs contain 32 entries on 32 sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO."] - pub fn idmactrlr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(80usize)) } + impl Default for Apb2rstr { + fn default() -> Apb2rstr { + Apb2rstr(0) + } } - #[doc = "The SDMMC_IDMABSIZER register contains the buffers size when in double buffer configuration."] - pub fn idmabsizer(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(84usize)) } + #[doc = "RCC APB3 Clock Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Apb3enr(pub u32); + impl Apb3enr { + #[doc = "LTDC peripheral clock enable"] + pub const fn ltdcen(&self) -> super::vals::Apb3enrLtdcen { + let val = (self.0 >> 3usize) & 0x01; + super::vals::Apb3enrLtdcen(val as u8) + } + #[doc = "LTDC peripheral clock enable"] + pub fn set_ltdcen(&mut self, val: super::vals::Apb3enrLtdcen) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); + } + #[doc = "WWDG1 Clock Enable"] + pub const fn wwdg1en(&self) -> super::vals::Apb3enrLtdcen { + let val = (self.0 >> 6usize) & 0x01; + super::vals::Apb3enrLtdcen(val as u8) + } + #[doc = "WWDG1 Clock Enable"] + pub fn set_wwdg1en(&mut self, val: super::vals::Apb3enrLtdcen) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); + } } - #[doc = "The SDMMC_IDMABASE0R register contains the memory buffer base address in single buffer configuration and the buffer 0 base address in double buffer configuration."] - pub fn idmabase0r(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(88usize)) } + impl Default for Apb3enr { + fn default() -> Apb3enr { + Apb3enr(0) + } } - #[doc = "The SDMMC_IDMABASE1R register contains the double buffer configuration second buffer memory base address."] - pub fn idmabase1r(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(92usize)) } + #[doc = "RCC AHB1 Sleep Clock Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct C1Ahb1lpenr(pub u32); + impl C1Ahb1lpenr { + #[doc = "DMA1 Clock Enable During CSleep Mode"] + pub const fn dma1lpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen { + let val = (self.0 >> 0usize) & 0x01; + super::vals::C1Ahb1lpenrDma1lpen(val as u8) + } + #[doc = "DMA1 Clock Enable During CSleep Mode"] + pub fn set_dma1lpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + } + #[doc = "DMA2 Clock Enable During CSleep Mode"] + pub const fn dma2lpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen { + let val = (self.0 >> 1usize) & 0x01; + super::vals::C1Ahb1lpenrDma1lpen(val as u8) + } + #[doc = "DMA2 Clock Enable During CSleep Mode"] + pub fn set_dma2lpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + } + #[doc = "ADC1/2 Peripheral Clocks Enable During CSleep Mode"] + pub const fn adc12lpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen { + let val = (self.0 >> 5usize) & 0x01; + super::vals::C1Ahb1lpenrDma1lpen(val as u8) + } + #[doc = "ADC1/2 Peripheral Clocks Enable During CSleep Mode"] + pub fn set_adc12lpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + } + #[doc = "Ethernet MAC bus interface Clock Enable During CSleep Mode"] + pub const fn eth1maclpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen { + let val = (self.0 >> 15usize) & 0x01; + super::vals::C1Ahb1lpenrDma1lpen(val as u8) + } + #[doc = "Ethernet MAC bus interface Clock Enable During CSleep Mode"] + pub fn set_eth1maclpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + } + #[doc = "Ethernet Transmission Clock Enable During CSleep Mode"] + pub const fn eth1txlpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen { + let val = (self.0 >> 16usize) & 0x01; + super::vals::C1Ahb1lpenrDma1lpen(val as u8) + } + #[doc = "Ethernet Transmission Clock Enable During CSleep Mode"] + pub fn set_eth1txlpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + } + #[doc = "Ethernet Reception Clock Enable During CSleep Mode"] + pub const fn eth1rxlpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen { + let val = (self.0 >> 17usize) & 0x01; + super::vals::C1Ahb1lpenrDma1lpen(val as u8) + } + #[doc = "Ethernet Reception Clock Enable During CSleep Mode"] + pub fn set_eth1rxlpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); + } + #[doc = "USB1OTG peripheral clock enable during CSleep mode"] + pub const fn usb1otglpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen { + let val = (self.0 >> 25usize) & 0x01; + super::vals::C1Ahb1lpenrDma1lpen(val as u8) + } + #[doc = "USB1OTG peripheral clock enable during CSleep mode"] + pub fn set_usb1otglpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) { + self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize); + } + #[doc = "USB_PHY1 clock enable during CSleep mode"] + pub const fn usb1ulpilpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen { + let val = (self.0 >> 26usize) & 0x01; + super::vals::C1Ahb1lpenrDma1lpen(val as u8) + } + #[doc = "USB_PHY1 clock enable during CSleep mode"] + pub fn set_usb1ulpilpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) { + self.0 = (self.0 & !(0x01 << 26usize)) | (((val.0 as u32) & 0x01) << 26usize); + } + #[doc = "USB2OTG peripheral clock enable during CSleep mode"] + pub const fn usb2otglpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen { + let val = (self.0 >> 27usize) & 0x01; + super::vals::C1Ahb1lpenrDma1lpen(val as u8) + } + #[doc = "USB2OTG peripheral clock enable during CSleep mode"] + pub fn set_usb2otglpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) { + self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize); + } + #[doc = "USB_PHY2 clocks enable during CSleep mode"] + pub const fn usb2ulpilpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen { + let val = (self.0 >> 28usize) & 0x01; + super::vals::C1Ahb1lpenrDma1lpen(val as u8) + } + #[doc = "USB_PHY2 clocks enable during CSleep mode"] + pub fn set_usb2ulpilpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) { + self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); + } } - #[doc = "The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO.When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated."] - pub fn fifor(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(128usize)) } + impl Default for C1Ahb1lpenr { + fn default() -> C1Ahb1lpenr { + C1Ahb1lpenr(0) + } } - #[doc = "SDMMC IP version register"] - pub fn ver(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(1012usize)) } + #[doc = "RCC PLLs Clock Source Selection Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Pllckselr(pub u32); + impl Pllckselr { + #[doc = "DIVMx and PLLs clock source selection"] + pub const fn pllsrc(&self) -> super::vals::Pllsrc { + let val = (self.0 >> 0usize) & 0x03; + super::vals::Pllsrc(val as u8) + } + #[doc = "DIVMx and PLLs clock source selection"] + pub fn set_pllsrc(&mut self, val: super::vals::Pllsrc) { + self.0 = (self.0 & !(0x03 << 0usize)) | (((val.0 as u32) & 0x03) << 0usize); + } + #[doc = "Prescaler for PLL1"] + pub fn divm(&self, n: usize) -> u8 { + assert!(n < 3usize); + let offs = 4usize + n * 8usize; + let val = (self.0 >> offs) & 0x3f; + val as u8 + } + #[doc = "Prescaler for PLL1"] + pub fn set_divm(&mut self, n: usize, val: u8) { + assert!(n < 3usize); + let offs = 4usize + n * 8usize; + self.0 = (self.0 & !(0x3f << offs)) | (((val as u32) & 0x3f) << offs); + } } - #[doc = "SDMMC IP identification register"] - pub fn id(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(1016usize)) } + impl Default for Pllckselr { + fn default() -> Pllckselr { + Pllckselr(0) + } } - } - pub mod regs { - use crate::generic::*; - #[doc = "The SDMMC_CLKCR register controls the SDMMC_CK output clock, the SDMMC_RX_CLK receive clock, and the bus width."] + #[doc = "RCC AHB3 Sleep Clock Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Clkcr(pub u32); - impl Clkcr { - #[doc = "Clock divide factor This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0). This field defines the divide factor between the input clock (SDMMCCLK) and the output clock (SDMMC_CK): SDMMC_CK frequency = SDMMCCLK / [2 * CLKDIV]. 0xx: etc.. xxx: etc.."] - pub const fn clkdiv(&self) -> u16 { - let val = (self.0 >> 0usize) & 0x03ff; - val as u16 + pub struct C1Ahb3lpenr(pub u32); + impl C1Ahb3lpenr { + #[doc = "MDMA Clock Enable During CSleep Mode"] + pub const fn mdmalpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen { + let val = (self.0 >> 0usize) & 0x01; + super::vals::C1Ahb3lpenrMdmalpen(val as u8) } - #[doc = "Clock divide factor This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0). This field defines the divide factor between the input clock (SDMMCCLK) and the output clock (SDMMC_CK): SDMMC_CK frequency = SDMMCCLK / [2 * CLKDIV]. 0xx: etc.. xxx: etc.."] - pub fn set_clkdiv(&mut self, val: u16) { - self.0 = (self.0 & !(0x03ff << 0usize)) | (((val as u32) & 0x03ff) << 0usize); + #[doc = "MDMA Clock Enable During CSleep Mode"] + pub fn set_mdmalpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "Power saving configuration bit This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0) For power saving, the SDMMC_CK clock output can be disabled when the bus is idle by setting PWRSAV:"] - pub const fn pwrsav(&self) -> bool { - let val = (self.0 >> 12usize) & 0x01; - val != 0 + #[doc = "DMA2D Clock Enable During CSleep Mode"] + pub const fn dma2dlpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen { + let val = (self.0 >> 4usize) & 0x01; + super::vals::C1Ahb3lpenrMdmalpen(val as u8) } - #[doc = "Power saving configuration bit This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0) For power saving, the SDMMC_CK clock output can be disabled when the bus is idle by setting PWRSAV:"] - pub fn set_pwrsav(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); + #[doc = "DMA2D Clock Enable During CSleep Mode"] + pub fn set_dma2dlpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); } - #[doc = "Wide bus mode enable bit This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0)"] - pub const fn widbus(&self) -> u8 { - let val = (self.0 >> 14usize) & 0x03; - val as u8 + #[doc = "JPGDEC Clock Enable During CSleep Mode"] + pub const fn jpgdeclpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen { + let val = (self.0 >> 5usize) & 0x01; + super::vals::C1Ahb3lpenrMdmalpen(val as u8) } - #[doc = "Wide bus mode enable bit This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0)"] - pub fn set_widbus(&mut self, val: u8) { - self.0 = (self.0 & !(0x03 << 14usize)) | (((val as u32) & 0x03) << 14usize); + #[doc = "JPGDEC Clock Enable During CSleep Mode"] + pub fn set_jpgdeclpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "SDMMC_CK dephasing selection bit for data and Command. This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0). When clock division = 1 (CLKDIV = 0), this bit has no effect. Data and Command change on SDMMC_CK falling edge. When clock division >1 (CLKDIV > 0) & DDR = 0: - SDMMC_CK edge occurs on SDMMCCLK rising edge. When clock division >1 (CLKDIV > 0) & DDR = 1: - Data changed on the SDMMCCLK falling edge succeeding a SDMMC_CK edge. - SDMMC_CK edge occurs on SDMMCCLK rising edge. - Data changed on the SDMMC_CK falling edge succeeding a SDMMC_CK edge. - SDMMC_CK edge occurs on SDMMCCLK rising edge."] - pub const fn negedge(&self) -> bool { - let val = (self.0 >> 16usize) & 0x01; + #[doc = "Flash interface clock enable during csleep mode"] + pub const fn flashpren(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; val != 0 } - #[doc = "SDMMC_CK dephasing selection bit for data and Command. This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0). When clock division = 1 (CLKDIV = 0), this bit has no effect. Data and Command change on SDMMC_CK falling edge. When clock division >1 (CLKDIV > 0) & DDR = 0: - SDMMC_CK edge occurs on SDMMCCLK rising edge. When clock division >1 (CLKDIV > 0) & DDR = 1: - Data changed on the SDMMCCLK falling edge succeeding a SDMMC_CK edge. - SDMMC_CK edge occurs on SDMMCCLK rising edge. - Data changed on the SDMMC_CK falling edge succeeding a SDMMC_CK edge. - SDMMC_CK edge occurs on SDMMCCLK rising edge."] - pub fn set_negedge(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + #[doc = "Flash interface clock enable during csleep mode"] + pub fn set_flashpren(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); } - #[doc = "Hardware flow control enable This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0) When Hardware flow control is enabled, the meaning of the TXFIFOE and RXFIFOF flags change, please see SDMMC status register definition in Section56.8.11."] - pub const fn hwfc_en(&self) -> bool { - let val = (self.0 >> 17usize) & 0x01; - val != 0 + #[doc = "FMC Peripheral Clocks Enable During CSleep Mode"] + pub const fn fmclpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen { + let val = (self.0 >> 12usize) & 0x01; + super::vals::C1Ahb3lpenrMdmalpen(val as u8) } - #[doc = "Hardware flow control enable This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0) When Hardware flow control is enabled, the meaning of the TXFIFOE and RXFIFOF flags change, please see SDMMC status register definition in Section56.8.11."] - pub fn set_hwfc_en(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); + #[doc = "FMC Peripheral Clocks Enable During CSleep Mode"] + pub fn set_fmclpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); } - #[doc = "Data rate signaling selection This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0) DDR rate shall only be selected with 4-bit or 8-bit wide bus mode. (WIDBUS > 00). DDR = 1 has no effect when WIDBUS = 00 (1-bit wide bus). DDR rate shall only be selected with clock division >1. (CLKDIV > 0)"] - pub const fn ddr(&self) -> bool { - let val = (self.0 >> 18usize) & 0x01; - val != 0 + #[doc = "QUADSPI and QUADSPI Delay Clock Enable During CSleep Mode"] + pub const fn qspilpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen { + let val = (self.0 >> 14usize) & 0x01; + super::vals::C1Ahb3lpenrMdmalpen(val as u8) } - #[doc = "Data rate signaling selection This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0) DDR rate shall only be selected with 4-bit or 8-bit wide bus mode. (WIDBUS > 00). DDR = 1 has no effect when WIDBUS = 00 (1-bit wide bus). DDR rate shall only be selected with clock division >1. (CLKDIV > 0)"] - pub fn set_ddr(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize); + #[doc = "QUADSPI and QUADSPI Delay Clock Enable During CSleep Mode"] + pub fn set_qspilpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); } - #[doc = "Bus speed mode selection between DS, HS, SDR12, SDR25 and SDR50, DDR50, SDR104. This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0)"] - pub const fn busspeed(&self) -> bool { - let val = (self.0 >> 19usize) & 0x01; - val != 0 + #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable During CSleep Mode"] + pub const fn sdmmc1lpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen { + let val = (self.0 >> 16usize) & 0x01; + super::vals::C1Ahb3lpenrMdmalpen(val as u8) } - #[doc = "Bus speed mode selection between DS, HS, SDR12, SDR25 and SDR50, DDR50, SDR104. This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0)"] - pub fn set_busspeed(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize); + #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable During CSleep Mode"] + pub fn set_sdmmc1lpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); } - #[doc = "Receive clock selection. These bits can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0)"] - pub const fn selclkrx(&self) -> u8 { - let val = (self.0 >> 20usize) & 0x03; - val as u8 + #[doc = "D1DTCM1 Block Clock Enable During CSleep mode"] + pub const fn d1dtcm1lpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen { + let val = (self.0 >> 28usize) & 0x01; + super::vals::C1Ahb3lpenrMdmalpen(val as u8) } - #[doc = "Receive clock selection. These bits can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0)"] - pub fn set_selclkrx(&mut self, val: u8) { - self.0 = (self.0 & !(0x03 << 20usize)) | (((val as u32) & 0x03) << 20usize); + #[doc = "D1DTCM1 Block Clock Enable During CSleep mode"] + pub fn set_d1dtcm1lpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) { + self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); + } + #[doc = "D1 DTCM2 Block Clock Enable During CSleep mode"] + pub const fn dtcm2lpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen { + let val = (self.0 >> 29usize) & 0x01; + super::vals::C1Ahb3lpenrMdmalpen(val as u8) + } + #[doc = "D1 DTCM2 Block Clock Enable During CSleep mode"] + pub fn set_dtcm2lpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) { + self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); + } + #[doc = "D1ITCM Block Clock Enable During CSleep mode"] + pub const fn itcmlpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen { + let val = (self.0 >> 30usize) & 0x01; + super::vals::C1Ahb3lpenrMdmalpen(val as u8) } - } - impl Default for Clkcr { - fn default() -> Clkcr { - Clkcr(0) + #[doc = "D1ITCM Block Clock Enable During CSleep mode"] + pub fn set_itcmlpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) { + self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize); } - } - #[doc = "The SDMMC_DTIMER register contains the data timeout period, in card bus clock periods. A counter loads the value from the SDMMC_DTIMER register, and starts decrementing when the data path state machine (DPSM) enters the Wait_R or Busy state. If the timer reaches 0 while the DPSM is in either of these states, the timeout status flag is set."] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Dtimer(pub u32); - impl Dtimer { - #[doc = "Data and R1b busy timeout period This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0). Data and R1b busy timeout period expressed in card bus clock periods."] - pub const fn datatime(&self) -> u32 { - let val = (self.0 >> 0usize) & 0xffff_ffff; - val as u32 + #[doc = "AXISRAM Block Clock Enable During CSleep mode"] + pub const fn axisramlpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen { + let val = (self.0 >> 31usize) & 0x01; + super::vals::C1Ahb3lpenrMdmalpen(val as u8) } - #[doc = "Data and R1b busy timeout period This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0). Data and R1b busy timeout period expressed in card bus clock periods."] - pub fn set_datatime(&mut self, val: u32) { - self.0 = - (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + #[doc = "AXISRAM Block Clock Enable During CSleep mode"] + pub fn set_axisramlpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) { + self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); } } - impl Default for Dtimer { - fn default() -> Dtimer { - Dtimer(0) + impl Default for C1Ahb3lpenr { + fn default() -> C1Ahb3lpenr { + C1Ahb3lpenr(0) } } - #[doc = "SDMMC power control register"] + #[doc = "RCC Clock Source Interrupt Flag Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Power(pub u32); - impl Power { - #[doc = "SDMMC state control bits. These bits can only be written when the SDMMC is not in the power-on state (PWRCTRL?11). These bits are used to define the functional state of the SDMMC signals: Any further write will be ignored, PWRCTRL value will keep 11."] - pub const fn pwrctrl(&self) -> u8 { - let val = (self.0 >> 0usize) & 0x03; - val as u8 + pub struct Cifr(pub u32); + impl Cifr { + #[doc = "LSI ready Interrupt Flag"] + pub const fn lsirdyf(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 } - #[doc = "SDMMC state control bits. These bits can only be written when the SDMMC is not in the power-on state (PWRCTRL?11). These bits are used to define the functional state of the SDMMC signals: Any further write will be ignored, PWRCTRL value will keep 11."] - pub fn set_pwrctrl(&mut self, val: u8) { - self.0 = (self.0 & !(0x03 << 0usize)) | (((val as u32) & 0x03) << 0usize); + #[doc = "LSI ready Interrupt Flag"] + pub fn set_lsirdyf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "Voltage switch sequence start. This bit is used to start the timing critical section of the voltage switch sequence:"] - pub const fn vswitch(&self) -> bool { + #[doc = "LSE ready Interrupt Flag"] + pub const fn lserdyf(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; + val != 0 + } + #[doc = "LSE ready Interrupt Flag"] + pub fn set_lserdyf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + } + #[doc = "HSI ready Interrupt Flag"] + pub const fn hsirdyf(&self) -> bool { let val = (self.0 >> 2usize) & 0x01; val != 0 } - #[doc = "Voltage switch sequence start. This bit is used to start the timing critical section of the voltage switch sequence:"] - pub fn set_vswitch(&mut self, val: bool) { + #[doc = "HSI ready Interrupt Flag"] + pub fn set_hsirdyf(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); } - #[doc = "Voltage switch procedure enable. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). This bit is used to stop the SDMMC_CK after the voltage switch command response:"] - pub const fn vswitchen(&self) -> bool { + #[doc = "HSE ready Interrupt Flag"] + pub const fn hserdyf(&self) -> bool { let val = (self.0 >> 3usize) & 0x01; val != 0 } - #[doc = "Voltage switch procedure enable. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). This bit is used to stop the SDMMC_CK after the voltage switch command response:"] - pub fn set_vswitchen(&mut self, val: bool) { + #[doc = "HSE ready Interrupt Flag"] + pub fn set_hserdyf(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); } - #[doc = "Data and command direction signals polarity selection. This bit can only be written when the SDMMC is in the power-off state (PWRCTRL = 00)."] - pub const fn dirpol(&self) -> bool { + #[doc = "CSI ready Interrupt Flag"] + pub const fn csirdy(&self) -> bool { let val = (self.0 >> 4usize) & 0x01; val != 0 } - #[doc = "Data and command direction signals polarity selection. This bit can only be written when the SDMMC is in the power-off state (PWRCTRL = 00)."] - pub fn set_dirpol(&mut self, val: bool) { + #[doc = "CSI ready Interrupt Flag"] + pub fn set_csirdy(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); } + #[doc = "RC48 ready Interrupt Flag"] + pub const fn hsi48rdyf(&self) -> bool { + let val = (self.0 >> 5usize) & 0x01; + val != 0 + } + #[doc = "RC48 ready Interrupt Flag"] + pub fn set_hsi48rdyf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); + } + #[doc = "PLL1 ready Interrupt Flag"] + pub fn pllrdyf(&self, n: usize) -> bool { + assert!(n < 3usize); + let offs = 6usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; + val != 0 + } + #[doc = "PLL1 ready Interrupt Flag"] + pub fn set_pllrdyf(&mut self, n: usize, val: bool) { + assert!(n < 3usize); + let offs = 6usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + } + #[doc = "LSE clock security system Interrupt Flag"] + pub const fn lsecssf(&self) -> bool { + let val = (self.0 >> 9usize) & 0x01; + val != 0 + } + #[doc = "LSE clock security system Interrupt Flag"] + pub fn set_lsecssf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + } + #[doc = "HSE clock security system Interrupt Flag"] + pub const fn hsecssf(&self) -> bool { + let val = (self.0 >> 10usize) & 0x01; + val != 0 + } + #[doc = "HSE clock security system Interrupt Flag"] + pub fn set_hsecssf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); + } } - impl Default for Power { - fn default() -> Power { - Power(0) + impl Default for Cifr { + fn default() -> Cifr { + Cifr(0) } } - #[doc = "SDMMC IP version register"] + #[doc = "RCC Domain 3 Clock Configuration Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ver(pub u32); - impl Ver { - #[doc = "IP minor revision number."] - pub const fn minrev(&self) -> u8 { - let val = (self.0 >> 0usize) & 0x0f; - val as u8 + pub struct D3cfgr(pub u32); + impl D3cfgr { + #[doc = "D3 domain APB4 prescaler"] + pub const fn d3ppre(&self) -> super::vals::D3ppre { + let val = (self.0 >> 4usize) & 0x07; + super::vals::D3ppre(val as u8) } - #[doc = "IP minor revision number."] - pub fn set_minrev(&mut self, val: u8) { - self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize); + #[doc = "D3 domain APB4 prescaler"] + pub fn set_d3ppre(&mut self, val: super::vals::D3ppre) { + self.0 = (self.0 & !(0x07 << 4usize)) | (((val.0 as u32) & 0x07) << 4usize); } - #[doc = "IP major revision number."] - pub const fn majrev(&self) -> u8 { - let val = (self.0 >> 4usize) & 0x0f; - val as u8 + } + impl Default for D3cfgr { + fn default() -> D3cfgr { + D3cfgr(0) } - #[doc = "IP major revision number."] - pub fn set_majrev(&mut self, val: u8) { - self.0 = (self.0 & !(0x0f << 4usize)) | (((val as u32) & 0x0f) << 4usize); + } + #[doc = "RCC Domain 2 Clock Configuration Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct D2cfgr(pub u32); + impl D2cfgr { + #[doc = "D2 domain APB1 prescaler"] + pub const fn d2ppre1(&self) -> super::vals::D2ppre1 { + let val = (self.0 >> 4usize) & 0x07; + super::vals::D2ppre1(val as u8) + } + #[doc = "D2 domain APB1 prescaler"] + pub fn set_d2ppre1(&mut self, val: super::vals::D2ppre1) { + self.0 = (self.0 & !(0x07 << 4usize)) | (((val.0 as u32) & 0x07) << 4usize); + } + #[doc = "D2 domain APB2 prescaler"] + pub const fn d2ppre2(&self) -> super::vals::D2ppre1 { + let val = (self.0 >> 8usize) & 0x07; + super::vals::D2ppre1(val as u8) + } + #[doc = "D2 domain APB2 prescaler"] + pub fn set_d2ppre2(&mut self, val: super::vals::D2ppre1) { + self.0 = (self.0 & !(0x07 << 8usize)) | (((val.0 as u32) & 0x07) << 8usize); } } - impl Default for Ver { - fn default() -> Ver { - Ver(0) + impl Default for D2cfgr { + fn default() -> D2cfgr { + D2cfgr(0) } } - #[doc = "The SDMMC_CMDR register contains the command index and command type bits. The command index is sent to a card as part of a command message. The command type bits control the command path state machine (CPSM)."] + #[doc = "RCC APB1 Peripheral Reset Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cmdr(pub u32); - impl Cmdr { - #[doc = "Command index. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). The command index is sent to the card as part of a command message."] - pub const fn cmdindex(&self) -> u8 { - let val = (self.0 >> 0usize) & 0x3f; - val as u8 + pub struct Apb1hrstr(pub u32); + impl Apb1hrstr { + #[doc = "Clock Recovery System reset"] + pub const fn crsrst(&self) -> super::vals::Crsrst { + let val = (self.0 >> 1usize) & 0x01; + super::vals::Crsrst(val as u8) } - #[doc = "Command index. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). The command index is sent to the card as part of a command message."] - pub fn set_cmdindex(&mut self, val: u8) { - self.0 = (self.0 & !(0x3f << 0usize)) | (((val as u32) & 0x3f) << 0usize); + #[doc = "Clock Recovery System reset"] + pub fn set_crsrst(&mut self, val: super::vals::Crsrst) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - #[doc = "The CPSM treats the command as a data transfer command, stops the interrupt period, and signals DataEnable to the DPSM This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). If this bit is set, the CPSM issues an end of interrupt period and issues DataEnable signal to the DPSM when the command is sent."] - pub const fn cmdtrans(&self) -> bool { - let val = (self.0 >> 6usize) & 0x01; - val != 0 + #[doc = "SWPMI block reset"] + pub const fn swprst(&self) -> super::vals::Crsrst { + let val = (self.0 >> 2usize) & 0x01; + super::vals::Crsrst(val as u8) } - #[doc = "The CPSM treats the command as a data transfer command, stops the interrupt period, and signals DataEnable to the DPSM This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). If this bit is set, the CPSM issues an end of interrupt period and issues DataEnable signal to the DPSM when the command is sent."] - pub fn set_cmdtrans(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + #[doc = "SWPMI block reset"] + pub fn set_swprst(&mut self, val: super::vals::Crsrst) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); } - #[doc = "The CPSM treats the command as a Stop Transmission command and signals Abort to the DPSM. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). If this bit is set, the CPSM issues the Abort signal to the DPSM when the command is sent."] - pub const fn cmdstop(&self) -> bool { - let val = (self.0 >> 7usize) & 0x01; - val != 0 + #[doc = "OPAMP block reset"] + pub const fn opamprst(&self) -> super::vals::Crsrst { + let val = (self.0 >> 4usize) & 0x01; + super::vals::Crsrst(val as u8) } - #[doc = "The CPSM treats the command as a Stop Transmission command and signals Abort to the DPSM. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). If this bit is set, the CPSM issues the Abort signal to the DPSM when the command is sent."] - pub fn set_cmdstop(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + #[doc = "OPAMP block reset"] + pub fn set_opamprst(&mut self, val: super::vals::Crsrst) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); } - #[doc = "Wait for response bits. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). They are used to configure whether the CPSM is to wait for a response, and if yes, which kind of response."] - pub const fn waitresp(&self) -> u8 { - let val = (self.0 >> 8usize) & 0x03; - val as u8 + #[doc = "MDIOS block reset"] + pub const fn mdiosrst(&self) -> super::vals::Crsrst { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Crsrst(val as u8) } - #[doc = "Wait for response bits. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). They are used to configure whether the CPSM is to wait for a response, and if yes, which kind of response."] - pub fn set_waitresp(&mut self, val: u8) { - self.0 = (self.0 & !(0x03 << 8usize)) | (((val as u32) & 0x03) << 8usize); + #[doc = "MDIOS block reset"] + pub fn set_mdiosrst(&mut self, val: super::vals::Crsrst) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "CPSM waits for interrupt request. If this bit is set, the CPSM disables command timeout and waits for an card interrupt request (Response). If this bit is cleared in the CPSM Wait state, will cause the abort of the interrupt mode."] - pub const fn waitint(&self) -> bool { - let val = (self.0 >> 10usize) & 0x01; - val != 0 + #[doc = "FDCAN block reset"] + pub const fn fdcanrst(&self) -> super::vals::Crsrst { + let val = (self.0 >> 8usize) & 0x01; + super::vals::Crsrst(val as u8) } - #[doc = "CPSM waits for interrupt request. If this bit is set, the CPSM disables command timeout and waits for an card interrupt request (Response). If this bit is cleared in the CPSM Wait state, will cause the abort of the interrupt mode."] - pub fn set_waitint(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); + #[doc = "FDCAN block reset"] + pub fn set_fdcanrst(&mut self, val: super::vals::Crsrst) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); } - #[doc = "CPSM Waits for end of data transfer (CmdPend internal signal) from DPSM. This bit when set, the CPSM waits for the end of data transfer trigger before it starts sending a command. WAITPEND is only taken into account when DTMODE = MMC stream data transfer, WIDBUS = 1-bit wide bus mode, DPSMACT = 1 and DTDIR = from host to card."] - pub const fn waitpend(&self) -> bool { - let val = (self.0 >> 11usize) & 0x01; - val != 0 + } + impl Default for Apb1hrstr { + fn default() -> Apb1hrstr { + Apb1hrstr(0) } - #[doc = "CPSM Waits for end of data transfer (CmdPend internal signal) from DPSM. This bit when set, the CPSM waits for the end of data transfer trigger before it starts sending a command. WAITPEND is only taken into account when DTMODE = MMC stream data transfer, WIDBUS = 1-bit wide bus mode, DPSMACT = 1 and DTDIR = from host to card."] - pub fn set_waitpend(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); + } + #[doc = "RCC APB2 Clock Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Apb2enr(pub u32); + impl Apb2enr { + #[doc = "TIM1 peripheral clock enable"] + pub const fn tim1en(&self) -> super::vals::Apb2enrTim1en { + let val = (self.0 >> 0usize) & 0x01; + super::vals::Apb2enrTim1en(val as u8) } - #[doc = "Command path state machine (CPSM) Enable bit This bit is written 1 by firmware, and cleared by hardware when the CPSM enters the Idle state. If this bit is set, the CPSM is enabled. When DTEN = 1, no command will be transfered nor boot procedure will be started. CPSMEN is cleared to 0."] - pub const fn cpsmen(&self) -> bool { - let val = (self.0 >> 12usize) & 0x01; - val != 0 + #[doc = "TIM1 peripheral clock enable"] + pub fn set_tim1en(&mut self, val: super::vals::Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "Command path state machine (CPSM) Enable bit This bit is written 1 by firmware, and cleared by hardware when the CPSM enters the Idle state. If this bit is set, the CPSM is enabled. When DTEN = 1, no command will be transfered nor boot procedure will be started. CPSMEN is cleared to 0."] - pub fn set_cpsmen(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); + #[doc = "TIM8 peripheral clock enable"] + pub const fn tim8en(&self) -> super::vals::Apb2enrTim1en { + let val = (self.0 >> 1usize) & 0x01; + super::vals::Apb2enrTim1en(val as u8) } - #[doc = "Hold new data block transmission and reception in the DPSM. If this bit is set, the DPSM will not move from the Wait_S state to the Send state or from the Wait_R state to the Receive state."] - pub const fn dthold(&self) -> bool { - let val = (self.0 >> 13usize) & 0x01; - val != 0 + #[doc = "TIM8 peripheral clock enable"] + pub fn set_tim8en(&mut self, val: super::vals::Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - #[doc = "Hold new data block transmission and reception in the DPSM. If this bit is set, the DPSM will not move from the Wait_S state to the Send state or from the Wait_R state to the Receive state."] - pub fn set_dthold(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); + #[doc = "USART1 Peripheral Clocks Enable"] + pub const fn usart1en(&self) -> super::vals::Apb2enrTim1en { + let val = (self.0 >> 4usize) & 0x01; + super::vals::Apb2enrTim1en(val as u8) } - #[doc = "Select the boot mode procedure to be used. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0)"] - pub const fn bootmode(&self) -> bool { - let val = (self.0 >> 14usize) & 0x01; - val != 0 + #[doc = "USART1 Peripheral Clocks Enable"] + pub fn set_usart1en(&mut self, val: super::vals::Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); } - #[doc = "Select the boot mode procedure to be used. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0)"] - pub fn set_bootmode(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); + #[doc = "USART6 Peripheral Clocks Enable"] + pub const fn usart6en(&self) -> super::vals::Apb2enrTim1en { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Apb2enrTim1en(val as u8) } - #[doc = "Enable boot mode procedure."] - pub const fn booten(&self) -> bool { - let val = (self.0 >> 15usize) & 0x01; - val != 0 + #[doc = "USART6 Peripheral Clocks Enable"] + pub fn set_usart6en(&mut self, val: super::vals::Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "Enable boot mode procedure."] - pub fn set_booten(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); + #[doc = "SPI1 Peripheral Clocks Enable"] + pub const fn spi1en(&self) -> super::vals::Apb2enrTim1en { + let val = (self.0 >> 12usize) & 0x01; + super::vals::Apb2enrTim1en(val as u8) } - #[doc = "The CPSM treats the command as a Suspend or Resume command and signals interrupt period start/end. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). CMDSUSPEND = 1 and CMDTRANS = 0 Suspend command, start interrupt period when response bit BS=0. CMDSUSPEND = 1 and CMDTRANS = 1 Resume command with data, end interrupt period when response bit DF=1."] - pub const fn cmdsuspend(&self) -> bool { - let val = (self.0 >> 16usize) & 0x01; - val != 0 + #[doc = "SPI1 Peripheral Clocks Enable"] + pub fn set_spi1en(&mut self, val: super::vals::Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); } - #[doc = "The CPSM treats the command as a Suspend or Resume command and signals interrupt period start/end. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). CMDSUSPEND = 1 and CMDTRANS = 0 Suspend command, start interrupt period when response bit BS=0. CMDSUSPEND = 1 and CMDTRANS = 1 Resume command with data, end interrupt period when response bit DF=1."] - pub fn set_cmdsuspend(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + #[doc = "SPI4 Peripheral Clocks Enable"] + pub const fn spi4en(&self) -> super::vals::Apb2enrTim1en { + let val = (self.0 >> 13usize) & 0x01; + super::vals::Apb2enrTim1en(val as u8) } - } - impl Default for Cmdr { - fn default() -> Cmdr { - Cmdr(0) + #[doc = "SPI4 Peripheral Clocks Enable"] + pub fn set_spi4en(&mut self, val: super::vals::Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize); } - } - #[doc = "The SDMMC_ACKTIMER register contains the acknowledgment timeout period, in SDMMC_CK bus clock periods. A counter loads the value from the SDMMC_ACKTIMER register, and starts decrementing when the data path state machine (DPSM) enters the Wait_Ack state. If the timer reaches 0 while the DPSM is in this states, the acknowledgment timeout status flag is set."] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Acktimer(pub u32); - impl Acktimer { - #[doc = "Boot acknowledgment timeout period This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). Boot acknowledgment timeout period expressed in card bus clock periods."] - pub const fn acktime(&self) -> u32 { - let val = (self.0 >> 0usize) & 0x01ff_ffff; - val as u32 + #[doc = "TIM15 peripheral clock enable"] + pub const fn tim15en(&self) -> super::vals::Apb2enrTim1en { + let val = (self.0 >> 16usize) & 0x01; + super::vals::Apb2enrTim1en(val as u8) } - #[doc = "Boot acknowledgment timeout period This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). Boot acknowledgment timeout period expressed in card bus clock periods."] - pub fn set_acktime(&mut self, val: u32) { - self.0 = - (self.0 & !(0x01ff_ffff << 0usize)) | (((val as u32) & 0x01ff_ffff) << 0usize); + #[doc = "TIM15 peripheral clock enable"] + pub fn set_tim15en(&mut self, val: super::vals::Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); } - } - impl Default for Acktimer { - fn default() -> Acktimer { - Acktimer(0) + #[doc = "TIM16 peripheral clock enable"] + pub const fn tim16en(&self) -> super::vals::Apb2enrTim1en { + let val = (self.0 >> 17usize) & 0x01; + super::vals::Apb2enrTim1en(val as u8) } - } - #[doc = "The SDMMC_IDMABASE1R register contains the double buffer configuration second buffer memory base address."] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Idmabase1r(pub u32); - impl Idmabase1r { - #[doc = "Buffer 1 memory base address, shall be word aligned (bit [1:0] -are always 0 and read only). This register can be written by firmware when DPSM is inactive (DPSMACT = 0), and can dynamically be written by firmware when DPSM active (DPSMACT = 1) and memory buffer 1 is inactive (IDMABACT = 0)."] - pub const fn idmabase1(&self) -> u32 { - let val = (self.0 >> 0usize) & 0xffff_ffff; - val as u32 + #[doc = "TIM16 peripheral clock enable"] + pub fn set_tim16en(&mut self, val: super::vals::Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); } - #[doc = "Buffer 1 memory base address, shall be word aligned (bit [1:0] -are always 0 and read only). This register can be written by firmware when DPSM is inactive (DPSMACT = 0), and can dynamically be written by firmware when DPSM active (DPSMACT = 1) and memory buffer 1 is inactive (IDMABACT = 0)."] - pub fn set_idmabase1(&mut self, val: u32) { - self.0 = - (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + #[doc = "TIM17 peripheral clock enable"] + pub const fn tim17en(&self) -> super::vals::Apb2enrTim1en { + let val = (self.0 >> 18usize) & 0x01; + super::vals::Apb2enrTim1en(val as u8) } - } - impl Default for Idmabase1r { - fn default() -> Idmabase1r { - Idmabase1r(0) + #[doc = "TIM17 peripheral clock enable"] + pub fn set_tim17en(&mut self, val: super::vals::Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); } - } - #[doc = "The SDMMC_DCNTR register loads the value from the data length register (see SDMMC_DLENR) when the DPSM moves from the Idle state to the Wait_R or Wait_S state. As data is transferred, the counter decrements the value until it reaches 0. The DPSM then moves to the Idle state and when there has been no error, the data status end flag (DATAEND) is set."] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Dcntr(pub u32); - impl Dcntr { - #[doc = "Data count value When read, the number of remaining data bytes to be transferred is returned. Write has no effect."] - pub const fn datacount(&self) -> u32 { - let val = (self.0 >> 0usize) & 0x01ff_ffff; - val as u32 + #[doc = "SPI5 Peripheral Clocks Enable"] + pub const fn spi5en(&self) -> super::vals::Apb2enrTim1en { + let val = (self.0 >> 20usize) & 0x01; + super::vals::Apb2enrTim1en(val as u8) } - #[doc = "Data count value When read, the number of remaining data bytes to be transferred is returned. Write has no effect."] - pub fn set_datacount(&mut self, val: u32) { - self.0 = - (self.0 & !(0x01ff_ffff << 0usize)) | (((val as u32) & 0x01ff_ffff) << 0usize); + #[doc = "SPI5 Peripheral Clocks Enable"] + pub fn set_spi5en(&mut self, val: super::vals::Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize); } - } - impl Default for Dcntr { - fn default() -> Dcntr { - Dcntr(0) + #[doc = "SAI1 Peripheral Clocks Enable"] + pub const fn sai1en(&self) -> super::vals::Apb2enrTim1en { + let val = (self.0 >> 22usize) & 0x01; + super::vals::Apb2enrTim1en(val as u8) } - } - #[doc = "SDMMC IP identification register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Id(pub u32); - impl Id { - #[doc = "SDMMC IP identification."] - pub const fn ip_id(&self) -> u32 { - let val = (self.0 >> 0usize) & 0xffff_ffff; - val as u32 + #[doc = "SAI1 Peripheral Clocks Enable"] + pub fn set_sai1en(&mut self, val: super::vals::Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); } - #[doc = "SDMMC IP identification."] - pub fn set_ip_id(&mut self, val: u32) { - self.0 = - (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + #[doc = "SAI2 Peripheral Clocks Enable"] + pub const fn sai2en(&self) -> super::vals::Apb2enrTim1en { + let val = (self.0 >> 23usize) & 0x01; + super::vals::Apb2enrTim1en(val as u8) } - } - impl Default for Id { - fn default() -> Id { - Id(0) + #[doc = "SAI2 Peripheral Clocks Enable"] + pub fn set_sai2en(&mut self, val: super::vals::Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize); } - } - #[doc = "The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO.When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated."] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Fifor(pub u32); - impl Fifor { - #[doc = "Receive and transmit FIFO data This register can only be read or written by firmware when the DPSM is active (DPSMACT=1). The FIFO data occupies 16 entries of 32-bit words."] - pub const fn fifodata(&self) -> u32 { - let val = (self.0 >> 0usize) & 0xffff_ffff; - val as u32 + #[doc = "SAI3 Peripheral Clocks Enable"] + pub const fn sai3en(&self) -> super::vals::Apb2enrTim1en { + let val = (self.0 >> 24usize) & 0x01; + super::vals::Apb2enrTim1en(val as u8) } - #[doc = "Receive and transmit FIFO data This register can only be read or written by firmware when the DPSM is active (DPSMACT=1). The FIFO data occupies 16 entries of 32-bit words."] - pub fn set_fifodata(&mut self, val: u32) { - self.0 = - (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + #[doc = "SAI3 Peripheral Clocks Enable"] + pub fn set_sai3en(&mut self, val: super::vals::Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); } - } - impl Default for Fifor { - fn default() -> Fifor { - Fifor(0) + #[doc = "DFSDM1 Peripheral Clocks Enable"] + pub const fn dfsdm1en(&self) -> super::vals::Apb2enrTim1en { + let val = (self.0 >> 28usize) & 0x01; + super::vals::Apb2enrTim1en(val as u8) } - } - #[doc = "The SDMMC_RESP1/2/3/4R registers contain the status of a card, which is part of the received response."] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Resp2r(pub u32); - impl Resp2r { - #[doc = "see Table404."] - pub const fn cardstatus2(&self) -> u32 { - let val = (self.0 >> 0usize) & 0xffff_ffff; - val as u32 + #[doc = "DFSDM1 Peripheral Clocks Enable"] + pub fn set_dfsdm1en(&mut self, val: super::vals::Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); } - #[doc = "see Table404."] - pub fn set_cardstatus2(&mut self, val: u32) { - self.0 = - (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + #[doc = "HRTIM peripheral clock enable"] + pub const fn hrtimen(&self) -> super::vals::Apb2enrTim1en { + let val = (self.0 >> 29usize) & 0x01; + super::vals::Apb2enrTim1en(val as u8) + } + #[doc = "HRTIM peripheral clock enable"] + pub fn set_hrtimen(&mut self, val: super::vals::Apb2enrTim1en) { + self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); } } - impl Default for Resp2r { - fn default() -> Resp2r { - Resp2r(0) + impl Default for Apb2enr { + fn default() -> Apb2enr { + Apb2enr(0) } } - #[doc = "The SDMMC_RESP1/2/3/4R registers contain the status of a card, which is part of the received response."] + #[doc = "RCC PLLs Configuration Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Resp3r(pub u32); - impl Resp3r { - #[doc = "see Table404."] - pub const fn cardstatus3(&self) -> u32 { - let val = (self.0 >> 0usize) & 0xffff_ffff; - val as u32 + pub struct Pllcfgr(pub u32); + impl Pllcfgr { + #[doc = "PLL1 fractional latch enable"] + pub fn pllfracen(&self, n: usize) -> super::vals::Pll1fracen { + assert!(n < 3usize); + let offs = 0usize + n * 4usize; + let val = (self.0 >> offs) & 0x01; + super::vals::Pll1fracen(val as u8) } - #[doc = "see Table404."] - pub fn set_cardstatus3(&mut self, val: u32) { - self.0 = - (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + #[doc = "PLL1 fractional latch enable"] + pub fn set_pllfracen(&mut self, n: usize, val: super::vals::Pll1fracen) { + assert!(n < 3usize); + let offs = 0usize + n * 4usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); } - } - impl Default for Resp3r { - fn default() -> Resp3r { - Resp3r(0) + #[doc = "PLL1 VCO selection"] + pub fn pllvcosel(&self, n: usize) -> super::vals::Pll1vcosel { + assert!(n < 3usize); + let offs = 1usize + n * 4usize; + let val = (self.0 >> offs) & 0x01; + super::vals::Pll1vcosel(val as u8) } - } - #[doc = "The SDMMC_ARGR register contains a 32-bit command argument, which is sent to a card as part of a command message."] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Argr(pub u32); - impl Argr { - #[doc = "Command argument. These bits can only be written by firmware when CPSM is disabled (CPSMEN = 0). Command argument sent to a card as part of a command message. If a command contains an argument, it must be loaded into this register before writing a command to the command register."] - pub const fn cmdarg(&self) -> u32 { - let val = (self.0 >> 0usize) & 0xffff_ffff; - val as u32 + #[doc = "PLL1 VCO selection"] + pub fn set_pllvcosel(&mut self, n: usize, val: super::vals::Pll1vcosel) { + assert!(n < 3usize); + let offs = 1usize + n * 4usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); } - #[doc = "Command argument. These bits can only be written by firmware when CPSM is disabled (CPSMEN = 0). Command argument sent to a card as part of a command message. If a command contains an argument, it must be loaded into this register before writing a command to the command register."] - pub fn set_cmdarg(&mut self, val: u32) { - self.0 = - (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + #[doc = "PLL1 input frequency range"] + pub fn pllrge(&self, n: usize) -> super::vals::Pll1rge { + assert!(n < 3usize); + let offs = 2usize + n * 4usize; + let val = (self.0 >> offs) & 0x03; + super::vals::Pll1rge(val as u8) } - } - impl Default for Argr { - fn default() -> Argr { - Argr(0) + #[doc = "PLL1 input frequency range"] + pub fn set_pllrge(&mut self, n: usize, val: super::vals::Pll1rge) { + assert!(n < 3usize); + let offs = 2usize + n * 4usize; + self.0 = (self.0 & !(0x03 << offs)) | (((val.0 as u32) & 0x03) << offs); } - } - #[doc = "The SDMMC_DLENR register contains the number of data bytes to be transferred. The value is loaded into the data counter when data transfer starts."] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Dlenr(pub u32); - impl Dlenr { - #[doc = "Data length value This register can only be written by firmware when DPSM is inactive (DPSMACT = 0). Number of data bytes to be transferred. When DDR = 1 DATALENGTH is truncated to a multiple of 2. (The last odd byte is not transfered) When DATALENGTH = 0 no data will be transfered, when requested by a CPSMEN and CMDTRANS = 1 also no command will be transfered. DTEN and CPSMEN are cleared to 0."] - pub const fn datalength(&self) -> u32 { - let val = (self.0 >> 0usize) & 0x01ff_ffff; - val as u32 + #[doc = "PLL1 DIVP divider output enable"] + pub fn divpen(&self, n: usize) -> super::vals::Divp1en { + assert!(n < 3usize); + let offs = 16usize + n * 3usize; + let val = (self.0 >> offs) & 0x01; + super::vals::Divp1en(val as u8) } - #[doc = "Data length value This register can only be written by firmware when DPSM is inactive (DPSMACT = 0). Number of data bytes to be transferred. When DDR = 1 DATALENGTH is truncated to a multiple of 2. (The last odd byte is not transfered) When DATALENGTH = 0 no data will be transfered, when requested by a CPSMEN and CMDTRANS = 1 also no command will be transfered. DTEN and CPSMEN are cleared to 0."] - pub fn set_datalength(&mut self, val: u32) { - self.0 = - (self.0 & !(0x01ff_ffff << 0usize)) | (((val as u32) & 0x01ff_ffff) << 0usize); + #[doc = "PLL1 DIVP divider output enable"] + pub fn set_divpen(&mut self, n: usize, val: super::vals::Divp1en) { + assert!(n < 3usize); + let offs = 16usize + n * 3usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); } - } - impl Default for Dlenr { - fn default() -> Dlenr { - Dlenr(0) + #[doc = "PLL1 DIVQ divider output enable"] + pub fn divqen(&self, n: usize) -> super::vals::Divp1en { + assert!(n < 3usize); + let offs = 17usize + n * 3usize; + let val = (self.0 >> offs) & 0x01; + super::vals::Divp1en(val as u8) } - } - #[doc = "The SDMMC_RESP1/2/3/4R registers contain the status of a card, which is part of the received response."] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Resp4r(pub u32); - impl Resp4r { - #[doc = "see Table404."] - pub const fn cardstatus4(&self) -> u32 { - let val = (self.0 >> 0usize) & 0xffff_ffff; - val as u32 + #[doc = "PLL1 DIVQ divider output enable"] + pub fn set_divqen(&mut self, n: usize, val: super::vals::Divp1en) { + assert!(n < 3usize); + let offs = 17usize + n * 3usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); } - #[doc = "see Table404."] - pub fn set_cardstatus4(&mut self, val: u32) { - self.0 = - (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + #[doc = "PLL1 DIVR divider output enable"] + pub fn divren(&self, n: usize) -> super::vals::Divp1en { + assert!(n < 3usize); + let offs = 18usize + n * 3usize; + let val = (self.0 >> offs) & 0x01; + super::vals::Divp1en(val as u8) + } + #[doc = "PLL1 DIVR divider output enable"] + pub fn set_divren(&mut self, n: usize, val: super::vals::Divp1en) { + assert!(n < 3usize); + let offs = 18usize + n * 3usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); } } - impl Default for Resp4r { - fn default() -> Resp4r { - Resp4r(0) + impl Default for Pllcfgr { + fn default() -> Pllcfgr { + Pllcfgr(0) } } - #[doc = "The SDMMC_STAR register is a read-only register. It contains two types of flag:Static flags (bits [29,21,11:0]): these bits remain asserted until they are cleared by writing to the SDMMC interrupt Clear register (see SDMMC_ICR)Dynamic flags (bits [20:12]): these bits change state depending on the state of the underlying logic (for example, FIFO full and empty flags are asserted and de-asserted as data while written to the FIFO)"] + #[doc = "RCC AHB4 Clock Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Star(pub u32); - impl Star { - #[doc = "Command response received (CRC check failed). Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub const fn ccrcfail(&self) -> bool { + pub struct C1Ahb4enr(pub u32); + impl C1Ahb4enr { + #[doc = "0GPIO peripheral clock enable"] + pub const fn gpioaen(&self) -> super::vals::C1Ahb4enrGpioaen { let val = (self.0 >> 0usize) & 0x01; - val != 0 + super::vals::C1Ahb4enrGpioaen(val as u8) } - #[doc = "Command response received (CRC check failed). Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub fn set_ccrcfail(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + #[doc = "0GPIO peripheral clock enable"] + pub fn set_gpioaen(&mut self, val: super::vals::C1Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "Data block sent/received (CRC check failed). Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub const fn dcrcfail(&self) -> bool { + #[doc = "0GPIO peripheral clock enable"] + pub const fn gpioben(&self) -> super::vals::C1Ahb4enrGpioaen { let val = (self.0 >> 1usize) & 0x01; - val != 0 + super::vals::C1Ahb4enrGpioaen(val as u8) } - #[doc = "Data block sent/received (CRC check failed). Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub fn set_dcrcfail(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + #[doc = "0GPIO peripheral clock enable"] + pub fn set_gpioben(&mut self, val: super::vals::C1Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); } - #[doc = "Command response timeout. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR. The Command Timeout period has a fixed value of 64 SDMMC_CK clock periods."] - pub const fn ctimeout(&self) -> bool { + #[doc = "0GPIO peripheral clock enable"] + pub const fn gpiocen(&self) -> super::vals::C1Ahb4enrGpioaen { let val = (self.0 >> 2usize) & 0x01; - val != 0 + super::vals::C1Ahb4enrGpioaen(val as u8) } - #[doc = "Command response timeout. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR. The Command Timeout period has a fixed value of 64 SDMMC_CK clock periods."] - pub fn set_ctimeout(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); + #[doc = "0GPIO peripheral clock enable"] + pub fn set_gpiocen(&mut self, val: super::vals::C1Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); } - #[doc = "Data timeout. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub const fn dtimeout(&self) -> bool { + #[doc = "0GPIO peripheral clock enable"] + pub const fn gpioden(&self) -> super::vals::C1Ahb4enrGpioaen { let val = (self.0 >> 3usize) & 0x01; - val != 0 + super::vals::C1Ahb4enrGpioaen(val as u8) } - #[doc = "Data timeout. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub fn set_dtimeout(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); + #[doc = "0GPIO peripheral clock enable"] + pub fn set_gpioden(&mut self, val: super::vals::C1Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); } - #[doc = "Transmit FIFO underrun error or IDMA read transfer error. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub const fn txunderr(&self) -> bool { + #[doc = "0GPIO peripheral clock enable"] + pub const fn gpioeen(&self) -> super::vals::C1Ahb4enrGpioaen { let val = (self.0 >> 4usize) & 0x01; - val != 0 + super::vals::C1Ahb4enrGpioaen(val as u8) } - #[doc = "Transmit FIFO underrun error or IDMA read transfer error. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub fn set_txunderr(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); + #[doc = "0GPIO peripheral clock enable"] + pub fn set_gpioeen(&mut self, val: super::vals::C1Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); } - #[doc = "Received FIFO overrun error or IDMA write transfer error. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub const fn rxoverr(&self) -> bool { + #[doc = "0GPIO peripheral clock enable"] + pub const fn gpiofen(&self) -> super::vals::C1Ahb4enrGpioaen { let val = (self.0 >> 5usize) & 0x01; - val != 0 + super::vals::C1Ahb4enrGpioaen(val as u8) } - #[doc = "Received FIFO overrun error or IDMA write transfer error. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub fn set_rxoverr(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); + #[doc = "0GPIO peripheral clock enable"] + pub fn set_gpiofen(&mut self, val: super::vals::C1Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "Command response received (CRC check passed, or no CRC). Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub const fn cmdrend(&self) -> bool { + #[doc = "0GPIO peripheral clock enable"] + pub const fn gpiogen(&self) -> super::vals::C1Ahb4enrGpioaen { let val = (self.0 >> 6usize) & 0x01; - val != 0 + super::vals::C1Ahb4enrGpioaen(val as u8) } - #[doc = "Command response received (CRC check passed, or no CRC). Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub fn set_cmdrend(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + #[doc = "0GPIO peripheral clock enable"] + pub fn set_gpiogen(&mut self, val: super::vals::C1Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); } - #[doc = "Command sent (no response required). Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub const fn cmdsent(&self) -> bool { + #[doc = "0GPIO peripheral clock enable"] + pub const fn gpiohen(&self) -> super::vals::C1Ahb4enrGpioaen { let val = (self.0 >> 7usize) & 0x01; - val != 0 + super::vals::C1Ahb4enrGpioaen(val as u8) } - #[doc = "Command sent (no response required). Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub fn set_cmdsent(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + #[doc = "0GPIO peripheral clock enable"] + pub fn set_gpiohen(&mut self, val: super::vals::C1Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); } - #[doc = "Data transfer ended correctly. (data counter, DATACOUNT is zero and no errors occur). Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub const fn dataend(&self) -> bool { + #[doc = "0GPIO peripheral clock enable"] + pub const fn gpioien(&self) -> super::vals::C1Ahb4enrGpioaen { let val = (self.0 >> 8usize) & 0x01; - val != 0 + super::vals::C1Ahb4enrGpioaen(val as u8) } - #[doc = "Data transfer ended correctly. (data counter, DATACOUNT is zero and no errors occur). Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub fn set_dataend(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + #[doc = "0GPIO peripheral clock enable"] + pub fn set_gpioien(&mut self, val: super::vals::C1Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); } - #[doc = "Data transfer Hold. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub const fn dhold(&self) -> bool { + #[doc = "0GPIO peripheral clock enable"] + pub const fn gpiojen(&self) -> super::vals::C1Ahb4enrGpioaen { let val = (self.0 >> 9usize) & 0x01; - val != 0 + super::vals::C1Ahb4enrGpioaen(val as u8) } - #[doc = "Data transfer Hold. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub fn set_dhold(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + #[doc = "0GPIO peripheral clock enable"] + pub fn set_gpiojen(&mut self, val: super::vals::C1Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); } - #[doc = "Data block sent/received. (CRC check passed) and DPSM moves to the READWAIT state. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub const fn dbckend(&self) -> bool { + #[doc = "0GPIO peripheral clock enable"] + pub const fn gpioken(&self) -> super::vals::C1Ahb4enrGpioaen { let val = (self.0 >> 10usize) & 0x01; - val != 0 + super::vals::C1Ahb4enrGpioaen(val as u8) } - #[doc = "Data block sent/received. (CRC check passed) and DPSM moves to the READWAIT state. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub fn set_dbckend(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); + #[doc = "0GPIO peripheral clock enable"] + pub fn set_gpioken(&mut self, val: super::vals::C1Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); } - #[doc = "Data transfer aborted by CMD12. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub const fn dabort(&self) -> bool { - let val = (self.0 >> 11usize) & 0x01; - val != 0 + #[doc = "CRC peripheral clock enable"] + pub const fn crcen(&self) -> super::vals::C1Ahb4enrGpioaen { + let val = (self.0 >> 19usize) & 0x01; + super::vals::C1Ahb4enrGpioaen(val as u8) } - #[doc = "Data transfer aborted by CMD12. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub fn set_dabort(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); + #[doc = "CRC peripheral clock enable"] + pub fn set_crcen(&mut self, val: super::vals::C1Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); } - #[doc = "Data path state machine active, i.e. not in Idle state. This is a hardware status flag only, does not generate an interrupt."] - pub const fn dpsmact(&self) -> bool { - let val = (self.0 >> 12usize) & 0x01; - val != 0 + #[doc = "BDMA and DMAMUX2 Clock Enable"] + pub const fn bdmaen(&self) -> super::vals::C1Ahb4enrGpioaen { + let val = (self.0 >> 21usize) & 0x01; + super::vals::C1Ahb4enrGpioaen(val as u8) } - #[doc = "Data path state machine active, i.e. not in Idle state. This is a hardware status flag only, does not generate an interrupt."] - pub fn set_dpsmact(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); + #[doc = "BDMA and DMAMUX2 Clock Enable"] + pub fn set_bdmaen(&mut self, val: super::vals::C1Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); } - #[doc = "Command path state machine active, i.e. not in Idle state. This is a hardware status flag only, does not generate an interrupt."] - pub const fn cpsmact(&self) -> bool { - let val = (self.0 >> 13usize) & 0x01; - val != 0 + #[doc = "ADC3 Peripheral Clocks Enable"] + pub const fn adc3en(&self) -> super::vals::C1Ahb4enrGpioaen { + let val = (self.0 >> 24usize) & 0x01; + super::vals::C1Ahb4enrGpioaen(val as u8) } - #[doc = "Command path state machine active, i.e. not in Idle state. This is a hardware status flag only, does not generate an interrupt."] - pub fn set_cpsmact(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); + #[doc = "ADC3 Peripheral Clocks Enable"] + pub fn set_adc3en(&mut self, val: super::vals::C1Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); } - #[doc = "Transmit FIFO half empty At least half the number of words can be written into the FIFO. This bit is cleared when the FIFO becomes half+1 full."] - pub const fn txfifohe(&self) -> bool { - let val = (self.0 >> 14usize) & 0x01; - val != 0 + #[doc = "HSEM peripheral clock enable"] + pub const fn hsemen(&self) -> super::vals::C1Ahb4enrGpioaen { + let val = (self.0 >> 25usize) & 0x01; + super::vals::C1Ahb4enrGpioaen(val as u8) } - #[doc = "Transmit FIFO half empty At least half the number of words can be written into the FIFO. This bit is cleared when the FIFO becomes half+1 full."] - pub fn set_txfifohe(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); + #[doc = "HSEM peripheral clock enable"] + pub fn set_hsemen(&mut self, val: super::vals::C1Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize); } - #[doc = "Receive FIFO half full There are at least half the number of words in the FIFO. This bit is cleared when the FIFO becomes half+1 empty."] - pub const fn rxfifohf(&self) -> bool { - let val = (self.0 >> 15usize) & 0x01; - val != 0 + #[doc = "Backup RAM Clock Enable"] + pub const fn bkpramen(&self) -> super::vals::C1Ahb4enrGpioaen { + let val = (self.0 >> 28usize) & 0x01; + super::vals::C1Ahb4enrGpioaen(val as u8) } - #[doc = "Receive FIFO half full There are at least half the number of words in the FIFO. This bit is cleared when the FIFO becomes half+1 empty."] - pub fn set_rxfifohf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); + #[doc = "Backup RAM Clock Enable"] + pub fn set_bkpramen(&mut self, val: super::vals::C1Ahb4enrGpioaen) { + self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); } - #[doc = "Transmit FIFO full This is a hardware status flag only, does not generate an interrupt. This bit is cleared when one FIFO location becomes empty."] - pub const fn txfifof(&self) -> bool { - let val = (self.0 >> 16usize) & 0x01; - val != 0 + } + impl Default for C1Ahb4enr { + fn default() -> C1Ahb4enr { + C1Ahb4enr(0) } - #[doc = "Transmit FIFO full This is a hardware status flag only, does not generate an interrupt. This bit is cleared when one FIFO location becomes empty."] - pub fn set_txfifof(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + } + #[doc = "RCC APB3 Sleep Clock Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct C1Apb3lpenr(pub u32); + impl C1Apb3lpenr { + #[doc = "LTDC peripheral clock enable during CSleep mode"] + pub const fn ltdclpen(&self) -> super::vals::C1Apb3lpenrLtdclpen { + let val = (self.0 >> 3usize) & 0x01; + super::vals::C1Apb3lpenrLtdclpen(val as u8) } - #[doc = "Receive FIFO full This bit is cleared when one FIFO location becomes empty."] - pub const fn rxfifof(&self) -> bool { - let val = (self.0 >> 17usize) & 0x01; - val != 0 + #[doc = "LTDC peripheral clock enable during CSleep mode"] + pub fn set_ltdclpen(&mut self, val: super::vals::C1Apb3lpenrLtdclpen) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); } - #[doc = "Receive FIFO full This bit is cleared when one FIFO location becomes empty."] - pub fn set_rxfifof(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); + #[doc = "WWDG1 Clock Enable During CSleep Mode"] + pub const fn wwdg1lpen(&self) -> super::vals::C1Apb3lpenrLtdclpen { + let val = (self.0 >> 6usize) & 0x01; + super::vals::C1Apb3lpenrLtdclpen(val as u8) } - #[doc = "Transmit FIFO empty This bit is cleared when one FIFO location becomes full."] - pub const fn txfifoe(&self) -> bool { - let val = (self.0 >> 18usize) & 0x01; - val != 0 + #[doc = "WWDG1 Clock Enable During CSleep Mode"] + pub fn set_wwdg1lpen(&mut self, val: super::vals::C1Apb3lpenrLtdclpen) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); } - #[doc = "Transmit FIFO empty This bit is cleared when one FIFO location becomes full."] - pub fn set_txfifoe(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize); + } + impl Default for C1Apb3lpenr { + fn default() -> C1Apb3lpenr { + C1Apb3lpenr(0) } - #[doc = "Receive FIFO empty This is a hardware status flag only, does not generate an interrupt. This bit is cleared when one FIFO location becomes full."] - pub const fn rxfifoe(&self) -> bool { - let val = (self.0 >> 19usize) & 0x01; - val != 0 + } + #[doc = "RCC AHB3 Sleep Clock Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ahb3lpenr(pub u32); + impl Ahb3lpenr { + #[doc = "MDMA Clock Enable During CSleep Mode"] + pub const fn mdmalpen(&self) -> super::vals::Ahb3lpenrMdmalpen { + let val = (self.0 >> 0usize) & 0x01; + super::vals::Ahb3lpenrMdmalpen(val as u8) } - #[doc = "Receive FIFO empty This is a hardware status flag only, does not generate an interrupt. This bit is cleared when one FIFO location becomes full."] - pub fn set_rxfifoe(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize); + #[doc = "MDMA Clock Enable During CSleep Mode"] + pub fn set_mdmalpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); } - #[doc = "Inverted value of SDMMC_D0 line (Busy), sampled at the end of a CMD response and a second time 2 SDMMC_CK cycles after the CMD response. This bit is reset to not busy when the SDMMCD0 line changes from busy to not busy. This bit does not signal busy due to data transfer. This is a hardware status flag only, it does not generate an interrupt."] - pub const fn busyd0(&self) -> bool { - let val = (self.0 >> 20usize) & 0x01; - val != 0 + #[doc = "DMA2D Clock Enable During CSleep Mode"] + pub const fn dma2dlpen(&self) -> super::vals::Ahb3lpenrMdmalpen { + let val = (self.0 >> 4usize) & 0x01; + super::vals::Ahb3lpenrMdmalpen(val as u8) } - #[doc = "Inverted value of SDMMC_D0 line (Busy), sampled at the end of a CMD response and a second time 2 SDMMC_CK cycles after the CMD response. This bit is reset to not busy when the SDMMCD0 line changes from busy to not busy. This bit does not signal busy due to data transfer. This is a hardware status flag only, it does not generate an interrupt."] - pub fn set_busyd0(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize); + #[doc = "DMA2D Clock Enable During CSleep Mode"] + pub fn set_dma2dlpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); } - #[doc = "end of SDMMC_D0 Busy following a CMD response detected. This indicates only end of busy following a CMD response. This bit does not signal busy due to data transfer. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub const fn busyd0end(&self) -> bool { - let val = (self.0 >> 21usize) & 0x01; - val != 0 + #[doc = "JPGDEC Clock Enable During CSleep Mode"] + pub const fn jpgdeclpen(&self) -> super::vals::Ahb3lpenrMdmalpen { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Ahb3lpenrMdmalpen(val as u8) } - #[doc = "end of SDMMC_D0 Busy following a CMD response detected. This indicates only end of busy following a CMD response. This bit does not signal busy due to data transfer. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub fn set_busyd0end(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); + #[doc = "JPGDEC Clock Enable During CSleep Mode"] + pub fn set_jpgdeclpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "SDIO interrupt received. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub const fn sdioit(&self) -> bool { - let val = (self.0 >> 22usize) & 0x01; - val != 0 + #[doc = "FLITF Clock Enable During CSleep Mode"] + pub const fn flashlpen(&self) -> super::vals::Ahb3lpenrMdmalpen { + let val = (self.0 >> 8usize) & 0x01; + super::vals::Ahb3lpenrMdmalpen(val as u8) } - #[doc = "SDIO interrupt received. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub fn set_sdioit(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); + #[doc = "FLITF Clock Enable During CSleep Mode"] + pub fn set_flashlpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); } - #[doc = "Boot acknowledgment received (boot acknowledgment check fail). Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub const fn ackfail(&self) -> bool { - let val = (self.0 >> 23usize) & 0x01; - val != 0 + #[doc = "FMC Peripheral Clocks Enable During CSleep Mode"] + pub const fn fmclpen(&self) -> super::vals::Ahb3lpenrMdmalpen { + let val = (self.0 >> 12usize) & 0x01; + super::vals::Ahb3lpenrMdmalpen(val as u8) + } + #[doc = "FMC Peripheral Clocks Enable During CSleep Mode"] + pub fn set_fmclpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); + } + #[doc = "QUADSPI and QUADSPI Delay Clock Enable During CSleep Mode"] + pub const fn qspilpen(&self) -> super::vals::Ahb3lpenrMdmalpen { + let val = (self.0 >> 14usize) & 0x01; + super::vals::Ahb3lpenrMdmalpen(val as u8) + } + #[doc = "QUADSPI and QUADSPI Delay Clock Enable During CSleep Mode"] + pub fn set_qspilpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); } - #[doc = "Boot acknowledgment received (boot acknowledgment check fail). Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub fn set_ackfail(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize); + #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable During CSleep Mode"] + pub const fn sdmmc1lpen(&self) -> super::vals::Ahb3lpenrMdmalpen { + let val = (self.0 >> 16usize) & 0x01; + super::vals::Ahb3lpenrMdmalpen(val as u8) } - #[doc = "Boot acknowledgment timeout. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub const fn acktimeout(&self) -> bool { - let val = (self.0 >> 24usize) & 0x01; - val != 0 + #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable During CSleep Mode"] + pub fn set_sdmmc1lpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); } - #[doc = "Boot acknowledgment timeout. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub fn set_acktimeout(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize); + #[doc = "D1DTCM1 Block Clock Enable During CSleep mode"] + pub const fn d1dtcm1lpen(&self) -> super::vals::Ahb3lpenrMdmalpen { + let val = (self.0 >> 28usize) & 0x01; + super::vals::Ahb3lpenrMdmalpen(val as u8) } - #[doc = "Voltage switch critical timing section completion. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub const fn vswend(&self) -> bool { - let val = (self.0 >> 25usize) & 0x01; - val != 0 + #[doc = "D1DTCM1 Block Clock Enable During CSleep mode"] + pub fn set_d1dtcm1lpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) { + self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); } - #[doc = "Voltage switch critical timing section completion. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub fn set_vswend(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize); + #[doc = "D1 DTCM2 Block Clock Enable During CSleep mode"] + pub const fn dtcm2lpen(&self) -> super::vals::Ahb3lpenrMdmalpen { + let val = (self.0 >> 29usize) & 0x01; + super::vals::Ahb3lpenrMdmalpen(val as u8) } - #[doc = "SDMMC_CK stopped in Voltage switch procedure. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub const fn ckstop(&self) -> bool { - let val = (self.0 >> 26usize) & 0x01; - val != 0 + #[doc = "D1 DTCM2 Block Clock Enable During CSleep mode"] + pub fn set_dtcm2lpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) { + self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); } - #[doc = "SDMMC_CK stopped in Voltage switch procedure. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub fn set_ckstop(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); + #[doc = "D1ITCM Block Clock Enable During CSleep mode"] + pub const fn itcmlpen(&self) -> super::vals::Ahb3lpenrMdmalpen { + let val = (self.0 >> 30usize) & 0x01; + super::vals::Ahb3lpenrMdmalpen(val as u8) } - #[doc = "IDMA transfer error. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub const fn idmate(&self) -> bool { - let val = (self.0 >> 27usize) & 0x01; - val != 0 + #[doc = "D1ITCM Block Clock Enable During CSleep mode"] + pub fn set_itcmlpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) { + self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize); } - #[doc = "IDMA transfer error. Interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub fn set_idmate(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize); + #[doc = "AXISRAM Block Clock Enable During CSleep mode"] + pub const fn axisramlpen(&self) -> super::vals::Ahb3lpenrMdmalpen { + let val = (self.0 >> 31usize) & 0x01; + super::vals::Ahb3lpenrMdmalpen(val as u8) } - #[doc = "IDMA buffer transfer complete. interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub const fn idmabtc(&self) -> bool { - let val = (self.0 >> 28usize) & 0x01; - val != 0 + #[doc = "AXISRAM Block Clock Enable During CSleep mode"] + pub fn set_axisramlpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) { + self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); } - #[doc = "IDMA buffer transfer complete. interrupt flag is cleared by writing corresponding interrupt clear bit in SDMMC_ICR."] - pub fn set_idmabtc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize); + } + impl Default for Ahb3lpenr { + fn default() -> Ahb3lpenr { + Ahb3lpenr(0) } } - impl Default for Star { - fn default() -> Star { - Star(0) - } + } + pub mod vals { + use crate::generic::*; + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Ahb3enrMdmaen(pub u8); + impl Ahb3enrMdmaen { + #[doc = "The selected clock is disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled"] + pub const ENABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Cecsel(pub u8); + impl Cecsel { + #[doc = "LSE selected as peripheral clock"] + pub const LSE: Self = Self(0); + #[doc = "LSI selected as peripheral clock"] + pub const LSI: Self = Self(0x01); + #[doc = "csi_ker selected as peripheral clock"] + pub const CSI_KER: Self = Self(0x02); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Mdmarst(pub u8); + impl Mdmarst { + #[doc = "Reset the selected module"] + pub const RESET: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Mco1(pub u8); + impl Mco1 { + #[doc = "HSI selected for micro-controller clock output"] + pub const HSI: Self = Self(0); + #[doc = "LSE selected for micro-controller clock output"] + pub const LSE: Self = Self(0x01); + #[doc = "HSE selected for micro-controller clock output"] + pub const HSE: Self = Self(0x02); + #[doc = "pll1_q selected for micro-controller clock output"] + pub const PLL1_Q: Self = Self(0x03); + #[doc = "HSI48 selected for micro-controller clock output"] + pub const HSI48: Self = Self(0x04); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Ahb3lpenrMdmalpen(pub u8); + impl Ahb3lpenrMdmalpen { + #[doc = "The selected clock is disabled during csleep mode"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled during csleep mode"] + pub const ENABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Hpre(pub u8); + impl Hpre { + #[doc = "sys_ck not divided"] + pub const DIV1: Self = Self(0); + #[doc = "sys_ck divided by 2"] + pub const DIV2: Self = Self(0x08); + #[doc = "sys_ck divided by 4"] + pub const DIV4: Self = Self(0x09); + #[doc = "sys_ck divided by 8"] + pub const DIV8: Self = Self(0x0a); + #[doc = "sys_ck divided by 16"] + pub const DIV16: Self = Self(0x0b); + #[doc = "sys_ck divided by 64"] + pub const DIV64: Self = Self(0x0c); + #[doc = "sys_ck divided by 128"] + pub const DIV128: Self = Self(0x0d); + #[doc = "sys_ck divided by 256"] + pub const DIV256: Self = Self(0x0e); + #[doc = "sys_ck divided by 512"] + pub const DIV512: Self = Self(0x0f); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Spdifsel(pub u8); + impl Spdifsel { + #[doc = "pll1_q selected as peripheral clock"] + pub const PLL1_Q: Self = Self(0); + #[doc = "pll2_r selected as peripheral clock"] + pub const PLL2_R: Self = Self(0x01); + #[doc = "pll3_r selected as peripheral clock"] + pub const PLL3_R: Self = Self(0x02); + #[doc = "hsi_ker selected as peripheral clock"] + pub const HSI_KER: Self = Self(0x03); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Ahb1enrDma1en(pub u8); + impl Ahb1enrDma1en { + #[doc = "The selected clock is disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled"] + pub const ENABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Camitfrst(pub u8); + impl Camitfrst { + #[doc = "Reset the selected module"] + pub const RESET: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Lsirdyr(pub u8); + impl Lsirdyr { + #[doc = "LSI oscillator not ready"] + pub const NOTREADY: Self = Self(0); + #[doc = "LSI oscillator ready"] + pub const READY: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Apb2lpenrTim1lpen(pub u8); + impl Apb2lpenrTim1lpen { + #[doc = "The selected clock is disabled during csleep mode"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled during csleep mode"] + pub const ENABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Gpioarst(pub u8); + impl Gpioarst { + #[doc = "Reset the selected module"] + pub const RESET: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct C1RsrCpurstfr(pub u8); + impl C1RsrCpurstfr { + #[doc = "No reset occoured for block"] + pub const NORESETOCCOURED: Self = Self(0); + #[doc = "Reset occoured for block"] + pub const RESETOCCOURRED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Apb4enrSyscfgen(pub u8); + impl Apb4enrSyscfgen { + #[doc = "The selected clock is disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled"] + pub const ENABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Sai4asel(pub u8); + impl Sai4asel { + #[doc = "pll1_q selected as peripheral clock"] + pub const PLL1_Q: Self = Self(0); + #[doc = "pll2_p selected as peripheral clock"] + pub const PLL2_P: Self = Self(0x01); + #[doc = "pll3_p selected as peripheral clock"] + pub const PLL3_P: Self = Self(0x02); + #[doc = "i2s_ckin selected as peripheral clock"] + pub const I2S_CKIN: Self = Self(0x03); + #[doc = "PER selected as peripheral clock"] + pub const PER: Self = Self(0x04); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Pllsrc(pub u8); + impl Pllsrc { + #[doc = "HSI selected as PLL clock"] + pub const HSI: Self = Self(0); + #[doc = "CSI selected as PLL clock"] + pub const CSI: Self = Self(0x01); + #[doc = "HSE selected as PLL clock"] + pub const HSE: Self = Self(0x02); + #[doc = "No clock sent to DIVMx dividers and PLLs"] + pub const NONE: Self = Self(0x03); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct C1Apb1hlpenrCrslpen(pub u8); + impl C1Apb1hlpenrCrslpen { + #[doc = "The selected clock is disabled during csleep mode"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled during csleep mode"] + pub const ENABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Ahb2enrDcmien(pub u8); + impl Ahb2enrDcmien { + #[doc = "The selected clock is disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled"] + pub const ENABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Fmcsel(pub u8); + impl Fmcsel { + #[doc = "rcc_hclk3 selected as peripheral clock"] + pub const RCC_HCLK3: Self = Self(0); + #[doc = "pll1_q selected as peripheral clock"] + pub const PLL1_Q: Self = Self(0x01); + #[doc = "pll2_r selected as peripheral clock"] + pub const PLL2_R: Self = Self(0x02); + #[doc = "PER selected as peripheral clock"] + pub const PER: Self = Self(0x03); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Swpsel(pub u8); + impl Swpsel { + #[doc = "pclk selected as peripheral clock"] + pub const PCLK: Self = Self(0); + #[doc = "hsi_ker selected as peripheral clock"] + pub const HSI_KER: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct C1Ahb1lpenrDma1lpen(pub u8); + impl C1Ahb1lpenrDma1lpen { + #[doc = "The selected clock is disabled during csleep mode"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled during csleep mode"] + pub const ENABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Rtcen(pub u8); + impl Rtcen { + #[doc = "RTC clock disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "RTC clock enabled"] + pub const ENABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Lsirdyie(pub u8); + impl Lsirdyie { + #[doc = "Interrupt disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "Interrupt enabled"] + pub const ENABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct C1Apb3enrLtdcen(pub u8); + impl C1Apb3enrLtdcen { + #[doc = "The selected clock is disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled"] + pub const ENABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct C1Apb3lpenrLtdclpen(pub u8); + impl C1Apb3lpenrLtdclpen { + #[doc = "The selected clock is disabled during csleep mode"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled during csleep mode"] + pub const ENABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Lsebyp(pub u8); + impl Lsebyp { + #[doc = "LSE crystal oscillator not bypassed"] + pub const NOTBYPASSED: Self = Self(0); + #[doc = "LSE crystal oscillator bypassed with external clock"] + pub const BYPASSED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct D1ppre(pub u8); + impl D1ppre { + #[doc = "rcc_hclk not divided"] + pub const DIV1: Self = Self(0); + #[doc = "rcc_hclk divided by 2"] + pub const DIV2: Self = Self(0x04); + #[doc = "rcc_hclk divided by 4"] + pub const DIV4: Self = Self(0x05); + #[doc = "rcc_hclk divided by 8"] + pub const DIV8: Self = Self(0x06); + #[doc = "rcc_hclk divided by 16"] + pub const DIV16: Self = Self(0x07); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct C1Apb1llpenrTim2lpen(pub u8); + impl C1Apb1llpenrTim2lpen { + #[doc = "The selected clock is disabled during csleep mode"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled during csleep mode"] + pub const ENABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Hsion(pub u8); + impl Hsion { + #[doc = "Clock Off"] + pub const OFF: Self = Self(0); + #[doc = "Clock On"] + pub const ON: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Ahb4lpenrGpioalpen(pub u8); + impl Ahb4lpenrGpioalpen { + #[doc = "The selected clock is disabled during csleep mode"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled during csleep mode"] + pub const ENABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Divp1en(pub u8); + impl Divp1en { + #[doc = "Clock ouput is disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "Clock output is enabled"] + pub const ENABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Lsecssdr(pub u8); + impl Lsecssdr { + #[doc = "No failure detected on 32 kHz oscillator"] + pub const NOFAILURE: Self = Self(0); + #[doc = "Failure detected on 32 kHz oscillator"] + pub const FAILURE: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Lsion(pub u8); + impl Lsion { + #[doc = "LSI oscillator Off"] + pub const OFF: Self = Self(0); + #[doc = "LSI oscillator On"] + pub const ON: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Apb3lpenrLtdclpen(pub u8); + impl Apb3lpenrLtdclpen { + #[doc = "The selected clock is disabled during csleep mode"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled during csleep mode"] + pub const ENABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Usart234578sel(pub u8); + impl Usart234578sel { + #[doc = "rcc_pclk1 selected as peripheral clock"] + pub const RCC_PCLK1: Self = Self(0); + #[doc = "pll2_q selected as peripheral clock"] + pub const PLL2_Q: Self = Self(0x01); + #[doc = "pll3_q selected as peripheral clock"] + pub const PLL3_Q: Self = Self(0x02); + #[doc = "hsi_ker selected as peripheral clock"] + pub const HSI_KER: Self = Self(0x03); + #[doc = "csi_ker selected as peripheral clock"] + pub const CSI_KER: Self = Self(0x04); + #[doc = "LSE selected as peripheral clock"] + pub const LSE: Self = Self(0x05); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Stopwuck(pub u8); + impl Stopwuck { + #[doc = "HSI selected as wake up clock from system Stop"] + pub const HSI: Self = Self(0); + #[doc = "CSI selected as wake up clock from system Stop"] + pub const CSI: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct C1Apb4lpenrSyscfglpen(pub u8); + impl C1Apb4lpenrSyscfglpen { + #[doc = "The selected clock is disabled during csleep mode"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled during csleep mode"] + pub const ENABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct C1Ahb4enrGpioaen(pub u8); + impl C1Ahb4enrGpioaen { + #[doc = "The selected clock is disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled"] + pub const ENABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Apb1llpenrTim2lpen(pub u8); + impl Apb1llpenrTim2lpen { + #[doc = "The selected clock is disabled during csleep mode"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled during csleep mode"] + pub const ENABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Apb1lenrTim2en(pub u8); + impl Apb1lenrTim2en { + #[doc = "The selected clock is disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled"] + pub const ENABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Syscfgrst(pub u8); + impl Syscfgrst { + #[doc = "Reset the selected module"] + pub const RESET: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Mco2(pub u8); + impl Mco2 { + #[doc = "System clock selected for micro-controller clock output"] + pub const SYSCLK: Self = Self(0); + #[doc = "pll2_p selected for micro-controller clock output"] + pub const PLL2_P: Self = Self(0x01); + #[doc = "HSE selected for micro-controller clock output"] + pub const HSE: Self = Self(0x02); + #[doc = "pll1_p selected for micro-controller clock output"] + pub const PLL1_P: Self = Self(0x03); + #[doc = "CSI selected for micro-controller clock output"] + pub const CSI: Self = Self(0x04); + #[doc = "LSI selected for micro-controller clock output"] + pub const LSI: Self = Self(0x05); } - #[doc = "The receive and transmit FIFOs can be read or written as 32-bit wide registers. The FIFOs contain 32 entries on 32 sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO."] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Idmactrlr(pub u32); - impl Idmactrlr { - #[doc = "IDMA enable This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."] - pub const fn idmaen(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; - val != 0 - } - #[doc = "IDMA enable This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."] - pub fn set_idmaen(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); - } - #[doc = "Buffer mode selection. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."] - pub const fn idmabmode(&self) -> bool { - let val = (self.0 >> 1usize) & 0x01; - val != 0 - } - #[doc = "Buffer mode selection. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."] - pub fn set_idmabmode(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); - } - #[doc = "Double buffer mode active buffer indication This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). When IDMA is enabled this bit is toggled by hardware."] - pub const fn idmabact(&self) -> bool { - let val = (self.0 >> 2usize) & 0x01; - val != 0 - } - #[doc = "Double buffer mode active buffer indication This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). When IDMA is enabled this bit is toggled by hardware."] - pub fn set_idmabact(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Ww1rsc(pub u8); + impl Ww1rsc { + #[doc = "Clear WWDG1 scope control"] + pub const CLEAR: Self = Self(0); + #[doc = "Set WWDG1 scope control"] + pub const SET: Self = Self(0x01); } - impl Default for Idmactrlr { - fn default() -> Idmactrlr { - Idmactrlr(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Spi45sel(pub u8); + impl Spi45sel { + #[doc = "APB clock selected as peripheral clock"] + pub const APB: Self = Self(0); + #[doc = "pll2_q selected as peripheral clock"] + pub const PLL2_Q: Self = Self(0x01); + #[doc = "pll3_q selected as peripheral clock"] + pub const PLL3_Q: Self = Self(0x02); + #[doc = "hsi_ker selected as peripheral clock"] + pub const HSI_KER: Self = Self(0x03); + #[doc = "csi_ker selected as peripheral clock"] + pub const CSI_KER: Self = Self(0x04); + #[doc = "HSE selected as peripheral clock"] + pub const HSE: Self = Self(0x05); } - #[doc = "The SDMMC_IDMABASE0R register contains the memory buffer base address in single buffer configuration and the buffer 0 base address in double buffer configuration."] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Idmabase0r(pub u32); - impl Idmabase0r { - #[doc = "Buffer 0 memory base address bits [31:2], shall be word aligned (bit [1:0] -are always 0 and read only). This register can be written by firmware when DPSM is inactive (DPSMACT = 0), and can dynamically be written by firmware when DPSM active (DPSMACT = 1) and memory buffer 0 is inactive (IDMABACT = 1)."] - pub const fn idmabase0(&self) -> u32 { - let val = (self.0 >> 0usize) & 0xffff_ffff; - val as u32 - } - #[doc = "Buffer 0 memory base address bits [31:2], shall be word aligned (bit [1:0] -are always 0 and read only). This register can be written by firmware when DPSM is inactive (DPSMACT = 0), and can dynamically be written by firmware when DPSM active (DPSMACT = 1) and memory buffer 0 is inactive (IDMABACT = 1)."] - pub fn set_idmabase0(&mut self, val: u32) { - self.0 = - (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Usbsel(pub u8); + impl Usbsel { + #[doc = "Disable the kernel clock"] + pub const DISABLE: Self = Self(0); + #[doc = "pll1_q selected as peripheral clock"] + pub const PLL1_Q: Self = Self(0x01); + #[doc = "pll3_q selected as peripheral clock"] + pub const PLL3_Q: Self = Self(0x02); + #[doc = "HSI48 selected as peripheral clock"] + pub const HSI48: Self = Self(0x03); } - impl Default for Idmabase0r { - fn default() -> Idmabase0r { - Idmabase0r(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Bdrst(pub u8); + impl Bdrst { + #[doc = "Resets the entire VSW domain"] + pub const RESET: Self = Self(0x01); } - #[doc = "SDMMC command response register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Respcmdr(pub u32); - impl Respcmdr { - #[doc = "Response command index"] - pub const fn respcmd(&self) -> u8 { - let val = (self.0 >> 0usize) & 0x3f; - val as u8 - } - #[doc = "Response command index"] - pub fn set_respcmd(&mut self, val: u8) { - self.0 = (self.0 & !(0x3f << 0usize)) | (((val as u32) & 0x3f) << 0usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Tim1rst(pub u8); + impl Tim1rst { + #[doc = "Reset the selected module"] + pub const RESET: Self = Self(0x01); } - impl Default for Respcmdr { - fn default() -> Respcmdr { - Respcmdr(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Lserdyr(pub u8); + impl Lserdyr { + #[doc = "LSE oscillator not ready"] + pub const NOTREADY: Self = Self(0); + #[doc = "LSE oscillator ready"] + pub const READY: Self = Self(0x01); } - #[doc = "The SDMMC_IDMABSIZER register contains the buffers size when in double buffer configuration."] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Idmabsizer(pub u32); - impl Idmabsizer { - #[doc = "Number of transfers per buffer. This 8-bit value shall be multiplied by 8 to get the size of the buffer in 32-bit words and by 32 to get the size of the buffer in bytes. Example: IDMABNDT = 0x01: buffer size = 8 words = 32 bytes. These bits can only be written by firmware when DPSM is inactive (DPSMACT = 0)."] - pub const fn idmabndt(&self) -> u8 { - let val = (self.0 >> 5usize) & 0xff; - val as u8 - } - #[doc = "Number of transfers per buffer. This 8-bit value shall be multiplied by 8 to get the size of the buffer in 32-bit words and by 32 to get the size of the buffer in bytes. Example: IDMABNDT = 0x01: buffer size = 8 words = 32 bytes. These bits can only be written by firmware when DPSM is inactive (DPSMACT = 0)."] - pub fn set_idmabndt(&mut self, val: u8) { - self.0 = (self.0 & !(0xff << 5usize)) | (((val as u32) & 0xff) << 5usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct C1RsrRmvf(pub u8); + impl C1RsrRmvf { + #[doc = "Not clearing the the reset flags"] + pub const NOTACTIVE: Self = Self(0); + #[doc = "Clear the reset flags"] + pub const CLEAR: Self = Self(0x01); } - impl Default for Idmabsizer { - fn default() -> Idmabsizer { - Idmabsizer(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct C1Apb2lpenrTim1lpen(pub u8); + impl C1Apb2lpenrTim1lpen { + #[doc = "The selected clock is disabled during csleep mode"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled during csleep mode"] + pub const ENABLED: Self = Self(0x01); } - #[doc = "The SDMMC_DCTRL register control the data path state machine (DPSM)."] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Dctrl(pub u32); - impl Dctrl { - #[doc = "Data transfer enable bit This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). This bit is cleared by Hardware when data transfer completes. This bit shall only be used to transfer data when no associated data transfer command is used, i.e. shall not be used with SD or eMMC cards."] - pub const fn dten(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; - val != 0 - } - #[doc = "Data transfer enable bit This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). This bit is cleared by Hardware when data transfer completes. This bit shall only be used to transfer data when no associated data transfer command is used, i.e. shall not be used with SD or eMMC cards."] - pub fn set_dten(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); - } - #[doc = "Data transfer direction selection This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."] - pub const fn dtdir(&self) -> bool { - let val = (self.0 >> 1usize) & 0x01; - val != 0 - } - #[doc = "Data transfer direction selection This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."] - pub fn set_dtdir(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); - } - #[doc = "Data transfer mode selection. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."] - pub const fn dtmode(&self) -> u8 { - let val = (self.0 >> 2usize) & 0x03; - val as u8 - } - #[doc = "Data transfer mode selection. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."] - pub fn set_dtmode(&mut self, val: u8) { - self.0 = (self.0 & !(0x03 << 2usize)) | (((val as u32) & 0x03) << 2usize); - } - #[doc = "Data block size This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). Define the data block length when the block data transfer mode is selected: When DATALENGTH is not a multiple of DBLOCKSIZE, the transfered data is truncated at a multiple of DBLOCKSIZE. (Any remain data will not be transfered.) When DDR = 1, DBLOCKSIZE = 0000 shall not be used. (No data will be transfered)"] - pub const fn dblocksize(&self) -> u8 { - let val = (self.0 >> 4usize) & 0x0f; - val as u8 - } - #[doc = "Data block size This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). Define the data block length when the block data transfer mode is selected: When DATALENGTH is not a multiple of DBLOCKSIZE, the transfered data is truncated at a multiple of DBLOCKSIZE. (Any remain data will not be transfered.) When DDR = 1, DBLOCKSIZE = 0000 shall not be used. (No data will be transfered)"] - pub fn set_dblocksize(&mut self, val: u8) { - self.0 = (self.0 & !(0x0f << 4usize)) | (((val as u32) & 0x0f) << 4usize); - } - #[doc = "Read wait start. If this bit is set, read wait operation starts."] - pub const fn rwstart(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; - val != 0 - } - #[doc = "Read wait start. If this bit is set, read wait operation starts."] - pub fn set_rwstart(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); - } - #[doc = "Read wait stop This bit is written by firmware and auto cleared by hardware when the DPSM moves from the READ_WAIT state to the WAIT_R or IDLE state."] - pub const fn rwstop(&self) -> bool { - let val = (self.0 >> 9usize) & 0x01; - val != 0 - } - #[doc = "Read wait stop This bit is written by firmware and auto cleared by hardware when the DPSM moves from the READ_WAIT state to the WAIT_R or IDLE state."] - pub fn set_rwstop(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); - } - #[doc = "Read wait mode. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."] - pub const fn rwmod(&self) -> bool { - let val = (self.0 >> 10usize) & 0x01; - val != 0 - } - #[doc = "Read wait mode. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."] - pub fn set_rwmod(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); - } - #[doc = "SD I/O interrupt enable functions This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). If this bit is set, the DPSM enables the SD I/O card specific interrupt operation."] - pub const fn sdioen(&self) -> bool { - let val = (self.0 >> 11usize) & 0x01; - val != 0 - } - #[doc = "SD I/O interrupt enable functions This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). If this bit is set, the DPSM enables the SD I/O card specific interrupt operation."] - pub fn set_sdioen(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); - } - #[doc = "Enable the reception of the boot acknowledgment. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."] - pub const fn bootacken(&self) -> bool { - let val = (self.0 >> 12usize) & 0x01; - val != 0 - } - #[doc = "Enable the reception of the boot acknowledgment. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."] - pub fn set_bootacken(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); - } - #[doc = "FIFO reset, will flush any remaining data. This bit can only be written by firmware when IDMAEN= 0 and DPSM is active (DPSMACT = 1). This bit will only take effect when a transfer error or transfer hold occurs."] - pub const fn fiforst(&self) -> bool { - let val = (self.0 >> 13usize) & 0x01; - val != 0 - } - #[doc = "FIFO reset, will flush any remaining data. This bit can only be written by firmware when IDMAEN= 0 and DPSM is active (DPSMACT = 1). This bit will only take effect when a transfer error or transfer hold occurs."] - pub fn set_fiforst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct RsrRmvf(pub u8); + impl RsrRmvf { + #[doc = "Not clearing the the reset flags"] + pub const NOTACTIVE: Self = Self(0); + #[doc = "Clear the reset flags"] + pub const CLEAR: Self = Self(0x01); } - impl Default for Dctrl { - fn default() -> Dctrl { - Dctrl(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Ahb4enrGpioaen(pub u8); + impl Ahb4enrGpioaen { + #[doc = "The selected clock is disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled"] + pub const ENABLED: Self = Self(0x01); } - #[doc = "The interrupt mask register determines which status flags generate an interrupt request by setting the corresponding bit to 1."] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Maskr(pub u32); - impl Maskr { - #[doc = "Command CRC fail interrupt enable Set and cleared by software to enable/disable interrupt caused by command CRC failure."] - pub const fn ccrcfailie(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; - val != 0 - } - #[doc = "Command CRC fail interrupt enable Set and cleared by software to enable/disable interrupt caused by command CRC failure."] - pub fn set_ccrcfailie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); - } - #[doc = "Data CRC fail interrupt enable Set and cleared by software to enable/disable interrupt caused by data CRC failure."] - pub const fn dcrcfailie(&self) -> bool { - let val = (self.0 >> 1usize) & 0x01; - val != 0 - } - #[doc = "Data CRC fail interrupt enable Set and cleared by software to enable/disable interrupt caused by data CRC failure."] - pub fn set_dcrcfailie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); - } - #[doc = "Command timeout interrupt enable Set and cleared by software to enable/disable interrupt caused by command timeout."] - pub const fn ctimeoutie(&self) -> bool { - let val = (self.0 >> 2usize) & 0x01; - val != 0 - } - #[doc = "Command timeout interrupt enable Set and cleared by software to enable/disable interrupt caused by command timeout."] - pub fn set_ctimeoutie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); - } - #[doc = "Data timeout interrupt enable Set and cleared by software to enable/disable interrupt caused by data timeout."] - pub const fn dtimeoutie(&self) -> bool { - let val = (self.0 >> 3usize) & 0x01; - val != 0 - } - #[doc = "Data timeout interrupt enable Set and cleared by software to enable/disable interrupt caused by data timeout."] - pub fn set_dtimeoutie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); - } - #[doc = "Tx FIFO underrun error interrupt enable Set and cleared by software to enable/disable interrupt caused by Tx FIFO underrun error."] - pub const fn txunderrie(&self) -> bool { - let val = (self.0 >> 4usize) & 0x01; - val != 0 - } - #[doc = "Tx FIFO underrun error interrupt enable Set and cleared by software to enable/disable interrupt caused by Tx FIFO underrun error."] - pub fn set_txunderrie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); - } - #[doc = "Rx FIFO overrun error interrupt enable Set and cleared by software to enable/disable interrupt caused by Rx FIFO overrun error."] - pub const fn rxoverrie(&self) -> bool { - let val = (self.0 >> 5usize) & 0x01; - val != 0 - } - #[doc = "Rx FIFO overrun error interrupt enable Set and cleared by software to enable/disable interrupt caused by Rx FIFO overrun error."] - pub fn set_rxoverrie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); - } - #[doc = "Command response received interrupt enable Set and cleared by software to enable/disable interrupt caused by receiving command response."] - pub const fn cmdrendie(&self) -> bool { - let val = (self.0 >> 6usize) & 0x01; - val != 0 - } - #[doc = "Command response received interrupt enable Set and cleared by software to enable/disable interrupt caused by receiving command response."] - pub fn set_cmdrendie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); - } - #[doc = "Command sent interrupt enable Set and cleared by software to enable/disable interrupt caused by sending command."] - pub const fn cmdsentie(&self) -> bool { - let val = (self.0 >> 7usize) & 0x01; - val != 0 - } - #[doc = "Command sent interrupt enable Set and cleared by software to enable/disable interrupt caused by sending command."] - pub fn set_cmdsentie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); - } - #[doc = "Data end interrupt enable Set and cleared by software to enable/disable interrupt caused by data end."] - pub const fn dataendie(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; - val != 0 - } - #[doc = "Data end interrupt enable Set and cleared by software to enable/disable interrupt caused by data end."] - pub fn set_dataendie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); - } - #[doc = "Data hold interrupt enable Set and cleared by software to enable/disable the interrupt generated when sending new data is hold in the DPSM Wait_S state."] - pub const fn dholdie(&self) -> bool { - let val = (self.0 >> 9usize) & 0x01; - val != 0 - } - #[doc = "Data hold interrupt enable Set and cleared by software to enable/disable the interrupt generated when sending new data is hold in the DPSM Wait_S state."] - pub fn set_dholdie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); - } - #[doc = "Data block end interrupt enable Set and cleared by software to enable/disable interrupt caused by data block end."] - pub const fn dbckendie(&self) -> bool { - let val = (self.0 >> 10usize) & 0x01; - val != 0 - } - #[doc = "Data block end interrupt enable Set and cleared by software to enable/disable interrupt caused by data block end."] - pub fn set_dbckendie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); - } - #[doc = "Data transfer aborted interrupt enable Set and cleared by software to enable/disable interrupt caused by a data transfer being aborted."] - pub const fn dabortie(&self) -> bool { - let val = (self.0 >> 11usize) & 0x01; - val != 0 - } - #[doc = "Data transfer aborted interrupt enable Set and cleared by software to enable/disable interrupt caused by a data transfer being aborted."] - pub fn set_dabortie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); - } - #[doc = "Tx FIFO half empty interrupt enable Set and cleared by software to enable/disable interrupt caused by Tx FIFO half empty."] - pub const fn txfifoheie(&self) -> bool { - let val = (self.0 >> 14usize) & 0x01; - val != 0 - } - #[doc = "Tx FIFO half empty interrupt enable Set and cleared by software to enable/disable interrupt caused by Tx FIFO half empty."] - pub fn set_txfifoheie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); - } - #[doc = "Rx FIFO half full interrupt enable Set and cleared by software to enable/disable interrupt caused by Rx FIFO half full."] - pub const fn rxfifohfie(&self) -> bool { - let val = (self.0 >> 15usize) & 0x01; - val != 0 - } - #[doc = "Rx FIFO half full interrupt enable Set and cleared by software to enable/disable interrupt caused by Rx FIFO half full."] - pub fn set_rxfifohfie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); - } - #[doc = "Rx FIFO full interrupt enable Set and cleared by software to enable/disable interrupt caused by Rx FIFO full."] - pub const fn rxfifofie(&self) -> bool { - let val = (self.0 >> 17usize) & 0x01; - val != 0 - } - #[doc = "Rx FIFO full interrupt enable Set and cleared by software to enable/disable interrupt caused by Rx FIFO full."] - pub fn set_rxfifofie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); - } - #[doc = "Tx FIFO empty interrupt enable Set and cleared by software to enable/disable interrupt caused by Tx FIFO empty."] - pub const fn txfifoeie(&self) -> bool { - let val = (self.0 >> 18usize) & 0x01; - val != 0 - } - #[doc = "Tx FIFO empty interrupt enable Set and cleared by software to enable/disable interrupt caused by Tx FIFO empty."] - pub fn set_txfifoeie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize); - } - #[doc = "BUSYD0END interrupt enable Set and cleared by software to enable/disable the interrupt generated when SDMMC_D0 signal changes from busy to NOT busy following a CMD response."] - pub const fn busyd0endie(&self) -> bool { - let val = (self.0 >> 21usize) & 0x01; - val != 0 - } - #[doc = "BUSYD0END interrupt enable Set and cleared by software to enable/disable the interrupt generated when SDMMC_D0 signal changes from busy to NOT busy following a CMD response."] - pub fn set_busyd0endie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); - } - #[doc = "SDIO mode interrupt received interrupt enable Set and cleared by software to enable/disable the interrupt generated when receiving the SDIO mode interrupt."] - pub const fn sdioitie(&self) -> bool { - let val = (self.0 >> 22usize) & 0x01; - val != 0 - } - #[doc = "SDIO mode interrupt received interrupt enable Set and cleared by software to enable/disable the interrupt generated when receiving the SDIO mode interrupt."] - pub fn set_sdioitie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); - } - #[doc = "Acknowledgment Fail interrupt enable Set and cleared by software to enable/disable interrupt caused by acknowledgment Fail."] - pub const fn ackfailie(&self) -> bool { - let val = (self.0 >> 23usize) & 0x01; - val != 0 - } - #[doc = "Acknowledgment Fail interrupt enable Set and cleared by software to enable/disable interrupt caused by acknowledgment Fail."] - pub fn set_ackfailie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize); - } - #[doc = "Acknowledgment timeout interrupt enable Set and cleared by software to enable/disable interrupt caused by acknowledgment timeout."] - pub const fn acktimeoutie(&self) -> bool { - let val = (self.0 >> 24usize) & 0x01; - val != 0 - } - #[doc = "Acknowledgment timeout interrupt enable Set and cleared by software to enable/disable interrupt caused by acknowledgment timeout."] - pub fn set_acktimeoutie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize); - } - #[doc = "Voltage switch critical timing section completion interrupt enable Set and cleared by software to enable/disable the interrupt generated when voltage switch critical timing section completion."] - pub const fn vswendie(&self) -> bool { - let val = (self.0 >> 25usize) & 0x01; - val != 0 - } - #[doc = "Voltage switch critical timing section completion interrupt enable Set and cleared by software to enable/disable the interrupt generated when voltage switch critical timing section completion."] - pub fn set_vswendie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize); - } - #[doc = "Voltage Switch clock stopped interrupt enable Set and cleared by software to enable/disable interrupt caused by Voltage Switch clock stopped."] - pub const fn ckstopie(&self) -> bool { - let val = (self.0 >> 26usize) & 0x01; - val != 0 - } - #[doc = "Voltage Switch clock stopped interrupt enable Set and cleared by software to enable/disable interrupt caused by Voltage Switch clock stopped."] - pub fn set_ckstopie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); - } - #[doc = "IDMA buffer transfer complete interrupt enable Set and cleared by software to enable/disable the interrupt generated when the IDMA has transferred all data belonging to a memory buffer."] - pub const fn idmabtcie(&self) -> bool { - let val = (self.0 >> 28usize) & 0x01; - val != 0 - } - #[doc = "IDMA buffer transfer complete interrupt enable Set and cleared by software to enable/disable the interrupt generated when the IDMA has transferred all data belonging to a memory buffer."] - pub fn set_idmabtcie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct RsrCpurstfr(pub u8); + impl RsrCpurstfr { + #[doc = "No reset occoured for block"] + pub const NORESETOCCOURED: Self = Self(0); + #[doc = "Reset occoured for block"] + pub const RESETOCCOURRED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Timpre(pub u8); + impl Timpre { + #[doc = "Timer kernel clock equal to 2x pclk by default"] + pub const DEFAULTX2: Self = Self(0); + #[doc = "Timer kernel clock equal to 4x pclk by default"] + pub const DEFAULTX4: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Rtcsel(pub u8); + impl Rtcsel { + #[doc = "No clock"] + pub const NOCLOCK: Self = Self(0); + #[doc = "LSE oscillator clock used as RTC clock"] + pub const LSE: Self = Self(0x01); + #[doc = "LSI oscillator clock used as RTC clock"] + pub const LSI: Self = Self(0x02); + #[doc = "HSE oscillator clock divided by a prescaler used as RTC clock"] + pub const HSE: Self = Self(0x03); } - impl Default for Maskr { - fn default() -> Maskr { - Maskr(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Ltdcrst(pub u8); + impl Ltdcrst { + #[doc = "Reset the selected module"] + pub const RESET: Self = Self(0x01); } - #[doc = "The SDMMC_RESP1/2/3/4R registers contain the status of a card, which is part of the received response."] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Resp1r(pub u32); - impl Resp1r { - #[doc = "see Table 432"] - pub const fn cardstatus1(&self) -> u32 { - let val = (self.0 >> 0usize) & 0xffff_ffff; - val as u32 - } - #[doc = "see Table 432"] - pub fn set_cardstatus1(&mut self, val: u32) { - self.0 = - (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct C1Ahb2enrDcmien(pub u8); + impl C1Ahb2enrDcmien { + #[doc = "The selected clock is disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled"] + pub const ENABLED: Self = Self(0x01); } - impl Default for Resp1r { - fn default() -> Resp1r { - Resp1r(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Pll1vcosel(pub u8); + impl Pll1vcosel { + #[doc = "VCO frequency range 192 to 836 MHz"] + pub const WIDEVCO: Self = Self(0); + #[doc = "VCO frequency range 150 to 420 MHz"] + pub const MEDIUMVCO: Self = Self(0x01); } - #[doc = "The SDMMC_ICR register is a write-only register. Writing a bit with 1 clears the corresponding bit in the SDMMC_STAR status register."] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Icr(pub u32); - impl Icr { - #[doc = "CCRCFAIL flag clear bit Set by software to clear the CCRCFAIL flag."] - pub const fn ccrcfailc(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; - val != 0 - } - #[doc = "CCRCFAIL flag clear bit Set by software to clear the CCRCFAIL flag."] - pub fn set_ccrcfailc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); - } - #[doc = "DCRCFAIL flag clear bit Set by software to clear the DCRCFAIL flag."] - pub const fn dcrcfailc(&self) -> bool { - let val = (self.0 >> 1usize) & 0x01; - val != 0 - } - #[doc = "DCRCFAIL flag clear bit Set by software to clear the DCRCFAIL flag."] - pub fn set_dcrcfailc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); - } - #[doc = "CTIMEOUT flag clear bit Set by software to clear the CTIMEOUT flag."] - pub const fn ctimeoutc(&self) -> bool { - let val = (self.0 >> 2usize) & 0x01; - val != 0 - } - #[doc = "CTIMEOUT flag clear bit Set by software to clear the CTIMEOUT flag."] - pub fn set_ctimeoutc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); - } - #[doc = "DTIMEOUT flag clear bit Set by software to clear the DTIMEOUT flag."] - pub const fn dtimeoutc(&self) -> bool { - let val = (self.0 >> 3usize) & 0x01; - val != 0 - } - #[doc = "DTIMEOUT flag clear bit Set by software to clear the DTIMEOUT flag."] - pub fn set_dtimeoutc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); - } - #[doc = "TXUNDERR flag clear bit Set by software to clear TXUNDERR flag."] - pub const fn txunderrc(&self) -> bool { - let val = (self.0 >> 4usize) & 0x01; - val != 0 - } - #[doc = "TXUNDERR flag clear bit Set by software to clear TXUNDERR flag."] - pub fn set_txunderrc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); - } - #[doc = "RXOVERR flag clear bit Set by software to clear the RXOVERR flag."] - pub const fn rxoverrc(&self) -> bool { - let val = (self.0 >> 5usize) & 0x01; - val != 0 - } - #[doc = "RXOVERR flag clear bit Set by software to clear the RXOVERR flag."] - pub fn set_rxoverrc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); - } - #[doc = "CMDREND flag clear bit Set by software to clear the CMDREND flag."] - pub const fn cmdrendc(&self) -> bool { - let val = (self.0 >> 6usize) & 0x01; - val != 0 - } - #[doc = "CMDREND flag clear bit Set by software to clear the CMDREND flag."] - pub fn set_cmdrendc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); - } - #[doc = "CMDSENT flag clear bit Set by software to clear the CMDSENT flag."] - pub const fn cmdsentc(&self) -> bool { - let val = (self.0 >> 7usize) & 0x01; - val != 0 - } - #[doc = "CMDSENT flag clear bit Set by software to clear the CMDSENT flag."] - pub fn set_cmdsentc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); - } - #[doc = "DATAEND flag clear bit Set by software to clear the DATAEND flag."] - pub const fn dataendc(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; - val != 0 - } - #[doc = "DATAEND flag clear bit Set by software to clear the DATAEND flag."] - pub fn set_dataendc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); - } - #[doc = "DHOLD flag clear bit Set by software to clear the DHOLD flag."] - pub const fn dholdc(&self) -> bool { - let val = (self.0 >> 9usize) & 0x01; - val != 0 - } - #[doc = "DHOLD flag clear bit Set by software to clear the DHOLD flag."] - pub fn set_dholdc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); - } - #[doc = "DBCKEND flag clear bit Set by software to clear the DBCKEND flag."] - pub const fn dbckendc(&self) -> bool { - let val = (self.0 >> 10usize) & 0x01; - val != 0 - } - #[doc = "DBCKEND flag clear bit Set by software to clear the DBCKEND flag."] - pub fn set_dbckendc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); - } - #[doc = "DABORT flag clear bit Set by software to clear the DABORT flag."] - pub const fn dabortc(&self) -> bool { - let val = (self.0 >> 11usize) & 0x01; - val != 0 - } - #[doc = "DABORT flag clear bit Set by software to clear the DABORT flag."] - pub fn set_dabortc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); - } - #[doc = "BUSYD0END flag clear bit Set by software to clear the BUSYD0END flag."] - pub const fn busyd0endc(&self) -> bool { - let val = (self.0 >> 21usize) & 0x01; - val != 0 - } - #[doc = "BUSYD0END flag clear bit Set by software to clear the BUSYD0END flag."] - pub fn set_busyd0endc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); - } - #[doc = "SDIOIT flag clear bit Set by software to clear the SDIOIT flag."] - pub const fn sdioitc(&self) -> bool { - let val = (self.0 >> 22usize) & 0x01; - val != 0 - } - #[doc = "SDIOIT flag clear bit Set by software to clear the SDIOIT flag."] - pub fn set_sdioitc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); - } - #[doc = "ACKFAIL flag clear bit Set by software to clear the ACKFAIL flag."] - pub const fn ackfailc(&self) -> bool { - let val = (self.0 >> 23usize) & 0x01; - val != 0 - } - #[doc = "ACKFAIL flag clear bit Set by software to clear the ACKFAIL flag."] - pub fn set_ackfailc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize); - } - #[doc = "ACKTIMEOUT flag clear bit Set by software to clear the ACKTIMEOUT flag."] - pub const fn acktimeoutc(&self) -> bool { - let val = (self.0 >> 24usize) & 0x01; - val != 0 - } - #[doc = "ACKTIMEOUT flag clear bit Set by software to clear the ACKTIMEOUT flag."] - pub fn set_acktimeoutc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize); - } - #[doc = "VSWEND flag clear bit Set by software to clear the VSWEND flag."] - pub const fn vswendc(&self) -> bool { - let val = (self.0 >> 25usize) & 0x01; - val != 0 - } - #[doc = "VSWEND flag clear bit Set by software to clear the VSWEND flag."] - pub fn set_vswendc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize); - } - #[doc = "CKSTOP flag clear bit Set by software to clear the CKSTOP flag."] - pub const fn ckstopc(&self) -> bool { - let val = (self.0 >> 26usize) & 0x01; - val != 0 - } - #[doc = "CKSTOP flag clear bit Set by software to clear the CKSTOP flag."] - pub fn set_ckstopc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); - } - #[doc = "IDMA transfer error clear bit Set by software to clear the IDMATE flag."] - pub const fn idmatec(&self) -> bool { - let val = (self.0 >> 27usize) & 0x01; - val != 0 - } - #[doc = "IDMA transfer error clear bit Set by software to clear the IDMATE flag."] - pub fn set_idmatec(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize); - } - #[doc = "IDMA buffer transfer complete clear bit Set by software to clear the IDMABTC flag."] - pub const fn idmabtcc(&self) -> bool { - let val = (self.0 >> 28usize) & 0x01; - val != 0 - } - #[doc = "IDMA buffer transfer complete clear bit Set by software to clear the IDMABTC flag."] - pub fn set_idmabtcc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct C1Ahb3lpenrMdmalpen(pub u8); + impl C1Ahb3lpenrMdmalpen { + #[doc = "The selected clock is disabled during csleep mode"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled during csleep mode"] + pub const ENABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct C1Apb1lenrTim2en(pub u8); + impl C1Apb1lenrTim2en { + #[doc = "The selected clock is disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled"] + pub const ENABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Hsidivfr(pub u8); + impl Hsidivfr { + #[doc = "New HSIDIV ratio has not yet propagated to hsi_ck"] + pub const NOTPROPAGATED: Self = Self(0); + #[doc = "HSIDIV ratio has propagated to hsi_ck"] + pub const PROPAGATED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Fdcansel(pub u8); + impl Fdcansel { + #[doc = "HSE selected as peripheral clock"] + pub const HSE: Self = Self(0); + #[doc = "pll1_q selected as peripheral clock"] + pub const PLL1_Q: Self = Self(0x01); + #[doc = "pll2_q selected as peripheral clock"] + pub const PLL2_Q: Self = Self(0x02); } - impl Default for Icr { - fn default() -> Icr { - Icr(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Lsirdyc(pub u8); + impl Lsirdyc { + #[doc = "Clear interrupt flag"] + pub const CLEAR: Self = Self(0x01); } - } -} -pub mod rcc_l0 { - use crate::generic::*; - #[doc = "Reset and clock control"] - #[derive(Copy, Clone)] - pub struct Rcc(pub *mut u8); - unsafe impl Send for Rcc {} - unsafe impl Sync for Rcc {} - impl Rcc { - #[doc = "Clock control register"] - pub fn cr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(0usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Apb1henrCrsen(pub u8); + impl Apb1henrCrsen { + #[doc = "The selected clock is disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled"] + pub const ENABLED: Self = Self(0x01); } - #[doc = "Internal clock sources calibration register"] - pub fn icscr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(4usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Hsirdyr(pub u8); + impl Hsirdyr { + #[doc = "Clock not ready"] + pub const NOTREADY: Self = Self(0); + #[doc = "Clock ready"] + pub const READY: Self = Self(0x01); } - #[doc = "Clock recovery RC register"] - pub fn crrcr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(8usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Lsecsson(pub u8); + impl Lsecsson { + #[doc = "Clock security system on 32 kHz oscillator off"] + pub const SECURITYOFF: Self = Self(0); + #[doc = "Clock security system on 32 kHz oscillator on"] + pub const SECURITYON: Self = Self(0x01); } - #[doc = "Clock configuration register"] - pub fn cfgr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(12usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Sdmmcsel(pub u8); + impl Sdmmcsel { + #[doc = "pll1_q selected as peripheral clock"] + pub const PLL1_Q: Self = Self(0); + #[doc = "pll2_r selected as peripheral clock"] + pub const PLL2_R: Self = Self(0x01); } - #[doc = "Clock interrupt enable register"] - pub fn cier(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(16usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Ahb1lpenrDma1lpen(pub u8); + impl Ahb1lpenrDma1lpen { + #[doc = "The selected clock is disabled during csleep mode"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled during csleep mode"] + pub const ENABLED: Self = Self(0x01); } - #[doc = "Clock interrupt flag register"] - pub fn cifr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(20usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct C1Ahb1enrDma1en(pub u8); + impl C1Ahb1enrDma1en { + #[doc = "The selected clock is disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled"] + pub const ENABLED: Self = Self(0x01); } - #[doc = "Clock interrupt clear register"] - pub fn cicr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(24usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Sai1sel(pub u8); + impl Sai1sel { + #[doc = "pll1_q selected as peripheral clock"] + pub const PLL1_Q: Self = Self(0); + #[doc = "pll2_p selected as peripheral clock"] + pub const PLL2_P: Self = Self(0x01); + #[doc = "pll3_p selected as peripheral clock"] + pub const PLL3_P: Self = Self(0x02); + #[doc = "I2S_CKIN selected as peripheral clock"] + pub const I2S_CKIN: Self = Self(0x03); + #[doc = "PER selected as peripheral clock"] + pub const PER: Self = Self(0x04); } - #[doc = "GPIO reset register"] - pub fn ioprstr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(28usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct D2ppre1(pub u8); + impl D2ppre1 { + #[doc = "rcc_hclk not divided"] + pub const DIV1: Self = Self(0); + #[doc = "rcc_hclk divided by 2"] + pub const DIV2: Self = Self(0x04); + #[doc = "rcc_hclk divided by 4"] + pub const DIV4: Self = Self(0x05); + #[doc = "rcc_hclk divided by 8"] + pub const DIV8: Self = Self(0x06); + #[doc = "rcc_hclk divided by 16"] + pub const DIV16: Self = Self(0x07); } - #[doc = "AHB peripheral reset register"] - pub fn ahbrstr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(32usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Rngsel(pub u8); + impl Rngsel { + #[doc = "HSI48 selected as peripheral clock"] + pub const HSI48: Self = Self(0); + #[doc = "pll1_q selected as peripheral clock"] + pub const PLL1_Q: Self = Self(0x01); + #[doc = "LSE selected as peripheral clock"] + pub const LSE: Self = Self(0x02); + #[doc = "LSI selected as peripheral clock"] + pub const LSI: Self = Self(0x03); } - #[doc = "APB2 peripheral reset register"] - pub fn apb2rstr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(36usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct C1Ahb4lpenrGpioalpen(pub u8); + impl C1Ahb4lpenrGpioalpen { + #[doc = "The selected clock is disabled during csleep mode"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled during csleep mode"] + pub const ENABLED: Self = Self(0x01); } - #[doc = "APB1 peripheral reset register"] - pub fn apb1rstr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(40usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Hrtimsel(pub u8); + impl Hrtimsel { + #[doc = "The HRTIM prescaler clock source is the same as other timers (rcc_timy_ker_ck)"] + pub const TIMY_KER: Self = Self(0); + #[doc = "The HRTIM prescaler clock source is the CPU clock (c_ck)"] + pub const C_CK: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Hsebyp(pub u8); + impl Hsebyp { + #[doc = "HSE crystal oscillator not bypassed"] + pub const NOTBYPASSED: Self = Self(0); + #[doc = "HSE crystal oscillator bypassed with external clock"] + pub const BYPASSED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Tim2rst(pub u8); + impl Tim2rst { + #[doc = "Reset the selected module"] + pub const RESET: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Lseon(pub u8); + impl Lseon { + #[doc = "LSE oscillator Off"] + pub const OFF: Self = Self(0); + #[doc = "LSE oscillator On"] + pub const ON: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Usart16sel(pub u8); + impl Usart16sel { + #[doc = "rcc_pclk2 selected as peripheral clock"] + pub const RCC_PCLK2: Self = Self(0); + #[doc = "pll2_q selected as peripheral clock"] + pub const PLL2_Q: Self = Self(0x01); + #[doc = "pll3_q selected as peripheral clock"] + pub const PLL3_Q: Self = Self(0x02); + #[doc = "hsi_ker selected as peripheral clock"] + pub const HSI_KER: Self = Self(0x03); + #[doc = "csi_ker selected as peripheral clock"] + pub const CSI_KER: Self = Self(0x04); + #[doc = "LSE selected as peripheral clock"] + pub const LSE: Self = Self(0x05); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct C1Ahb2lpenrDcmilpen(pub u8); + impl C1Ahb2lpenrDcmilpen { + #[doc = "The selected clock is disabled during csleep mode"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled during csleep mode"] + pub const ENABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Apb3enrLtdcen(pub u8); + impl Apb3enrLtdcen { + #[doc = "The selected clock is disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled"] + pub const ENABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Lptim1sel(pub u8); + impl Lptim1sel { + #[doc = "rcc_pclk1 selected as peripheral clock"] + pub const RCC_PCLK1: Self = Self(0); + #[doc = "pll2_p selected as peripheral clock"] + pub const PLL2_P: Self = Self(0x01); + #[doc = "pll3_r selected as peripheral clock"] + pub const PLL3_R: Self = Self(0x02); + #[doc = "LSE selected as peripheral clock"] + pub const LSE: Self = Self(0x03); + #[doc = "LSI selected as peripheral clock"] + pub const LSI: Self = Self(0x04); + #[doc = "PER selected as peripheral clock"] + pub const PER: Self = Self(0x05); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Adcsel(pub u8); + impl Adcsel { + #[doc = "pll2_p selected as peripheral clock"] + pub const PLL2_P: Self = Self(0); + #[doc = "pll3_r selected as peripheral clock"] + pub const PLL3_R: Self = Self(0x01); + #[doc = "PER selected as peripheral clock"] + pub const PER: Self = Self(0x02); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Divp1(pub u8); + impl Divp1 { + #[doc = "pll_p_ck = vco_ck"] + pub const DIV1: Self = Self(0); + #[doc = "pll_p_ck = vco_ck / 2"] + pub const DIV2: Self = Self(0x01); + #[doc = "pll_p_ck = vco_ck / 4"] + pub const DIV4: Self = Self(0x03); + #[doc = "pll_p_ck = vco_ck / 6"] + pub const DIV6: Self = Self(0x05); + #[doc = "pll_p_ck = vco_ck / 8"] + pub const DIV8: Self = Self(0x07); + #[doc = "pll_p_ck = vco_ck / 10"] + pub const DIV10: Self = Self(0x09); + #[doc = "pll_p_ck = vco_ck / 12"] + pub const DIV12: Self = Self(0x0b); + #[doc = "pll_p_ck = vco_ck / 14"] + pub const DIV14: Self = Self(0x0d); + #[doc = "pll_p_ck = vco_ck / 16"] + pub const DIV16: Self = Self(0x0f); + #[doc = "pll_p_ck = vco_ck / 18"] + pub const DIV18: Self = Self(0x11); + #[doc = "pll_p_ck = vco_ck / 20"] + pub const DIV20: Self = Self(0x13); + #[doc = "pll_p_ck = vco_ck / 22"] + pub const DIV22: Self = Self(0x15); + #[doc = "pll_p_ck = vco_ck / 24"] + pub const DIV24: Self = Self(0x17); + #[doc = "pll_p_ck = vco_ck / 26"] + pub const DIV26: Self = Self(0x19); + #[doc = "pll_p_ck = vco_ck / 28"] + pub const DIV28: Self = Self(0x1b); + #[doc = "pll_p_ck = vco_ck / 30"] + pub const DIV30: Self = Self(0x1d); + #[doc = "pll_p_ck = vco_ck / 32"] + pub const DIV32: Self = Self(0x1f); + #[doc = "pll_p_ck = vco_ck / 34"] + pub const DIV34: Self = Self(0x21); + #[doc = "pll_p_ck = vco_ck / 36"] + pub const DIV36: Self = Self(0x23); + #[doc = "pll_p_ck = vco_ck / 38"] + pub const DIV38: Self = Self(0x25); + #[doc = "pll_p_ck = vco_ck / 40"] + pub const DIV40: Self = Self(0x27); + #[doc = "pll_p_ck = vco_ck / 42"] + pub const DIV42: Self = Self(0x29); + #[doc = "pll_p_ck = vco_ck / 44"] + pub const DIV44: Self = Self(0x2b); + #[doc = "pll_p_ck = vco_ck / 46"] + pub const DIV46: Self = Self(0x2d); + #[doc = "pll_p_ck = vco_ck / 48"] + pub const DIV48: Self = Self(0x2f); + #[doc = "pll_p_ck = vco_ck / 50"] + pub const DIV50: Self = Self(0x31); + #[doc = "pll_p_ck = vco_ck / 52"] + pub const DIV52: Self = Self(0x33); + #[doc = "pll_p_ck = vco_ck / 54"] + pub const DIV54: Self = Self(0x35); + #[doc = "pll_p_ck = vco_ck / 56"] + pub const DIV56: Self = Self(0x37); + #[doc = "pll_p_ck = vco_ck / 58"] + pub const DIV58: Self = Self(0x39); + #[doc = "pll_p_ck = vco_ck / 60"] + pub const DIV60: Self = Self(0x3b); + #[doc = "pll_p_ck = vco_ck / 62"] + pub const DIV62: Self = Self(0x3d); + #[doc = "pll_p_ck = vco_ck / 64"] + pub const DIV64: Self = Self(0x3f); + #[doc = "pll_p_ck = vco_ck / 66"] + pub const DIV66: Self = Self(0x41); + #[doc = "pll_p_ck = vco_ck / 68"] + pub const DIV68: Self = Self(0x43); + #[doc = "pll_p_ck = vco_ck / 70"] + pub const DIV70: Self = Self(0x45); + #[doc = "pll_p_ck = vco_ck / 72"] + pub const DIV72: Self = Self(0x47); + #[doc = "pll_p_ck = vco_ck / 74"] + pub const DIV74: Self = Self(0x49); + #[doc = "pll_p_ck = vco_ck / 76"] + pub const DIV76: Self = Self(0x4b); + #[doc = "pll_p_ck = vco_ck / 78"] + pub const DIV78: Self = Self(0x4d); + #[doc = "pll_p_ck = vco_ck / 80"] + pub const DIV80: Self = Self(0x4f); + #[doc = "pll_p_ck = vco_ck / 82"] + pub const DIV82: Self = Self(0x51); + #[doc = "pll_p_ck = vco_ck / 84"] + pub const DIV84: Self = Self(0x53); + #[doc = "pll_p_ck = vco_ck / 86"] + pub const DIV86: Self = Self(0x55); + #[doc = "pll_p_ck = vco_ck / 88"] + pub const DIV88: Self = Self(0x57); + #[doc = "pll_p_ck = vco_ck / 90"] + pub const DIV90: Self = Self(0x59); + #[doc = "pll_p_ck = vco_ck / 92"] + pub const DIV92: Self = Self(0x5b); + #[doc = "pll_p_ck = vco_ck / 94"] + pub const DIV94: Self = Self(0x5d); + #[doc = "pll_p_ck = vco_ck / 96"] + pub const DIV96: Self = Self(0x5f); + #[doc = "pll_p_ck = vco_ck / 98"] + pub const DIV98: Self = Self(0x61); + #[doc = "pll_p_ck = vco_ck / 100"] + pub const DIV100: Self = Self(0x63); + #[doc = "pll_p_ck = vco_ck / 102"] + pub const DIV102: Self = Self(0x65); + #[doc = "pll_p_ck = vco_ck / 104"] + pub const DIV104: Self = Self(0x67); + #[doc = "pll_p_ck = vco_ck / 106"] + pub const DIV106: Self = Self(0x69); + #[doc = "pll_p_ck = vco_ck / 108"] + pub const DIV108: Self = Self(0x6b); + #[doc = "pll_p_ck = vco_ck / 110"] + pub const DIV110: Self = Self(0x6d); + #[doc = "pll_p_ck = vco_ck / 112"] + pub const DIV112: Self = Self(0x6f); + #[doc = "pll_p_ck = vco_ck / 114"] + pub const DIV114: Self = Self(0x71); + #[doc = "pll_p_ck = vco_ck / 116"] + pub const DIV116: Self = Self(0x73); + #[doc = "pll_p_ck = vco_ck / 118"] + pub const DIV118: Self = Self(0x75); + #[doc = "pll_p_ck = vco_ck / 120"] + pub const DIV120: Self = Self(0x77); + #[doc = "pll_p_ck = vco_ck / 122"] + pub const DIV122: Self = Self(0x79); + #[doc = "pll_p_ck = vco_ck / 124"] + pub const DIV124: Self = Self(0x7b); + #[doc = "pll_p_ck = vco_ck / 126"] + pub const DIV126: Self = Self(0x7d); + #[doc = "pll_p_ck = vco_ck / 128"] + pub const DIV128: Self = Self(0x7f); } - #[doc = "GPIO clock enable register"] - pub fn iopenr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(44usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Apb2enrTim1en(pub u8); + impl Apb2enrTim1en { + #[doc = "The selected clock is disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled"] + pub const ENABLED: Self = Self(0x01); } - #[doc = "AHB peripheral clock enable register"] - pub fn ahbenr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(48usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct C1Apb1henrCrsen(pub u8); + impl C1Apb1henrCrsen { + #[doc = "The selected clock is disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled"] + pub const ENABLED: Self = Self(0x01); } - #[doc = "APB2 peripheral clock enable register"] - pub fn apb2enr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(52usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Apb4lpenrSyscfglpen(pub u8); + impl Apb4lpenrSyscfglpen { + #[doc = "The selected clock is disabled during csleep mode"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled during csleep mode"] + pub const ENABLED: Self = Self(0x01); } - #[doc = "APB1 peripheral clock enable register"] - pub fn apb1enr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(56usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Ckpersel(pub u8); + impl Ckpersel { + #[doc = "HSI selected as peripheral clock"] + pub const HSI: Self = Self(0); + #[doc = "CSI selected as peripheral clock"] + pub const CSI: Self = Self(0x01); + #[doc = "HSE selected as peripheral clock"] + pub const HSE: Self = Self(0x02); } - #[doc = "GPIO clock enable in sleep mode register"] - pub fn iopsmen(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(60usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Swsr(pub u8); + impl Swsr { + #[doc = "HSI oscillator used as system clock"] + pub const HSI: Self = Self(0); + #[doc = "CSI oscillator used as system clock"] + pub const CSI: Self = Self(0x01); + #[doc = "HSE oscillator used as system clock"] + pub const HSE: Self = Self(0x02); + #[doc = "PLL1 used as system clock"] + pub const PLL1: Self = Self(0x03); } - #[doc = "AHB peripheral clock enable in sleep mode register"] - pub fn ahbsmenr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(64usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct C1Apb2enrTim1en(pub u8); + impl C1Apb2enrTim1en { + #[doc = "The selected clock is disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled"] + pub const ENABLED: Self = Self(0x01); } - #[doc = "APB2 peripheral clock enable in sleep mode register"] - pub fn apb2smenr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(68usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Spi6sel(pub u8); + impl Spi6sel { + #[doc = "rcc_pclk4 selected as peripheral clock"] + pub const RCC_PCLK4: Self = Self(0); + #[doc = "pll2_q selected as peripheral clock"] + pub const PLL2_Q: Self = Self(0x01); + #[doc = "pll3_q selected as peripheral clock"] + pub const PLL3_Q: Self = Self(0x02); + #[doc = "hsi_ker selected as peripheral clock"] + pub const HSI_KER: Self = Self(0x03); + #[doc = "csi_ker selected as peripheral clock"] + pub const CSI_KER: Self = Self(0x04); + #[doc = "HSE selected as peripheral clock"] + pub const HSE: Self = Self(0x05); } - #[doc = "APB1 peripheral clock enable in sleep mode register"] - pub fn apb1smenr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(72usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Bdmaamen(pub u8); + impl Bdmaamen { + #[doc = "Clock disabled in autonomous mode"] + pub const DISABLED: Self = Self(0); + #[doc = "Clock enabled in autonomous mode"] + pub const ENABLED: Self = Self(0x01); } - #[doc = "Clock configuration register"] - pub fn ccipr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(76usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Dma1rst(pub u8); + impl Dma1rst { + #[doc = "Reset the selected module"] + pub const RESET: Self = Self(0x01); } - #[doc = "Control and status register"] - pub fn csr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(80usize)) } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct C1Apb4enrSyscfgen(pub u8); + impl C1Apb4enrSyscfgen { + #[doc = "The selected clock is disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled"] + pub const ENABLED: Self = Self(0x01); } - } - pub mod regs { - use crate::generic::*; - #[doc = "Control and status register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Csr(pub u32); - impl Csr { - #[doc = "Internal low-speed oscillator enable"] - pub const fn lsion(&self) -> super::vals::Csslseon { - let val = (self.0 >> 0usize) & 0x01; - super::vals::Csslseon(val as u8) - } - #[doc = "Internal low-speed oscillator enable"] - pub fn set_lsion(&mut self, val: super::vals::Csslseon) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); - } - #[doc = "Internal low-speed oscillator ready bit"] - pub const fn lsirdy(&self) -> super::vals::Lserdy { - let val = (self.0 >> 1usize) & 0x01; - super::vals::Lserdy(val as u8) - } - #[doc = "Internal low-speed oscillator ready bit"] - pub fn set_lsirdy(&mut self, val: super::vals::Lserdy) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); - } - #[doc = "External low-speed oscillator enable bit"] - pub const fn lseon(&self) -> super::vals::Csslseon { - let val = (self.0 >> 8usize) & 0x01; - super::vals::Csslseon(val as u8) - } - #[doc = "External low-speed oscillator enable bit"] - pub fn set_lseon(&mut self, val: super::vals::Csslseon) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); - } - #[doc = "External low-speed oscillator ready bit"] - pub const fn lserdy(&self) -> super::vals::Lserdy { - let val = (self.0 >> 9usize) & 0x01; - super::vals::Lserdy(val as u8) - } - #[doc = "External low-speed oscillator ready bit"] - pub fn set_lserdy(&mut self, val: super::vals::Lserdy) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); - } - #[doc = "External low-speed oscillator bypass bit"] - pub const fn lsebyp(&self) -> super::vals::Lsebyp { - let val = (self.0 >> 10usize) & 0x01; - super::vals::Lsebyp(val as u8) - } - #[doc = "External low-speed oscillator bypass bit"] - pub fn set_lsebyp(&mut self, val: super::vals::Lsebyp) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); - } - #[doc = "LSEDRV"] - pub const fn lsedrv(&self) -> super::vals::Lsedrv { - let val = (self.0 >> 11usize) & 0x03; - super::vals::Lsedrv(val as u8) - } - #[doc = "LSEDRV"] - pub fn set_lsedrv(&mut self, val: super::vals::Lsedrv) { - self.0 = (self.0 & !(0x03 << 11usize)) | (((val.0 as u32) & 0x03) << 11usize); - } - #[doc = "CSSLSEON"] - pub const fn csslseon(&self) -> super::vals::Csslseon { - let val = (self.0 >> 13usize) & 0x01; - super::vals::Csslseon(val as u8) - } - #[doc = "CSSLSEON"] - pub fn set_csslseon(&mut self, val: super::vals::Csslseon) { - self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize); - } - #[doc = "CSS on LSE failure detection flag"] - pub const fn csslsed(&self) -> super::vals::Csslsed { - let val = (self.0 >> 14usize) & 0x01; - super::vals::Csslsed(val as u8) - } - #[doc = "CSS on LSE failure detection flag"] - pub fn set_csslsed(&mut self, val: super::vals::Csslsed) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); - } - #[doc = "RTC and LCD clock source selection bits"] - pub const fn rtcsel(&self) -> super::vals::Rtcsel { - let val = (self.0 >> 16usize) & 0x03; - super::vals::Rtcsel(val as u8) - } - #[doc = "RTC and LCD clock source selection bits"] - pub fn set_rtcsel(&mut self, val: super::vals::Rtcsel) { - self.0 = (self.0 & !(0x03 << 16usize)) | (((val.0 as u32) & 0x03) << 16usize); - } - #[doc = "RTC clock enable bit"] - pub const fn rtcen(&self) -> super::vals::Rtcen { - let val = (self.0 >> 18usize) & 0x01; - super::vals::Rtcen(val as u8) - } - #[doc = "RTC clock enable bit"] - pub fn set_rtcen(&mut self, val: super::vals::Rtcen) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); - } - #[doc = "RTC software reset bit"] - pub const fn rtcrst(&self) -> bool { - let val = (self.0 >> 19usize) & 0x01; - val != 0 - } - #[doc = "RTC software reset bit"] - pub fn set_rtcrst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize); - } - #[doc = "Remove reset flag"] - pub const fn rmvf(&self) -> bool { - let val = (self.0 >> 24usize) & 0x01; - val != 0 - } - #[doc = "Remove reset flag"] - pub fn set_rmvf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize); - } - #[doc = "OBLRSTF"] - pub const fn oblrstf(&self) -> bool { - let val = (self.0 >> 25usize) & 0x01; - val != 0 - } - #[doc = "OBLRSTF"] - pub fn set_oblrstf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize); - } - #[doc = "PIN reset flag"] - pub const fn pinrstf(&self) -> bool { - let val = (self.0 >> 26usize) & 0x01; - val != 0 - } - #[doc = "PIN reset flag"] - pub fn set_pinrstf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); - } - #[doc = "POR/PDR reset flag"] - pub const fn porrstf(&self) -> bool { - let val = (self.0 >> 27usize) & 0x01; - val != 0 - } - #[doc = "POR/PDR reset flag"] - pub fn set_porrstf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize); - } - #[doc = "Software reset flag"] - pub const fn sftrstf(&self) -> bool { - let val = (self.0 >> 28usize) & 0x01; - val != 0 - } - #[doc = "Software reset flag"] - pub fn set_sftrstf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize); - } - #[doc = "Independent watchdog reset flag"] - pub const fn iwdgrstf(&self) -> bool { - let val = (self.0 >> 29usize) & 0x01; - val != 0 - } - #[doc = "Independent watchdog reset flag"] - pub fn set_iwdgrstf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 29usize)) | (((val as u32) & 0x01) << 29usize); - } - #[doc = "Window watchdog reset flag"] - pub const fn wwdgrstf(&self) -> bool { - let val = (self.0 >> 30usize) & 0x01; - val != 0 - } - #[doc = "Window watchdog reset flag"] - pub fn set_wwdgrstf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 30usize)) | (((val as u32) & 0x01) << 30usize); - } - #[doc = "Low-power reset flag"] - pub const fn lpwrrstf(&self) -> bool { - let val = (self.0 >> 31usize) & 0x01; - val != 0 - } - #[doc = "Low-power reset flag"] - pub fn set_lpwrrstf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize); - } - } - impl Default for Csr { - fn default() -> Csr { - Csr(0) - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Lptim2sel(pub u8); + impl Lptim2sel { + #[doc = "rcc_pclk4 selected as peripheral clock"] + pub const RCC_PCLK4: Self = Self(0); + #[doc = "pll2_p selected as peripheral clock"] + pub const PLL2_P: Self = Self(0x01); + #[doc = "pll3_r selected as peripheral clock"] + pub const PLL3_R: Self = Self(0x02); + #[doc = "LSE selected as peripheral clock"] + pub const LSE: Self = Self(0x03); + #[doc = "LSI selected as peripheral clock"] + pub const LSI: Self = Self(0x04); + #[doc = "PER selected as peripheral clock"] + pub const PER: Self = Self(0x05); } - #[doc = "Clock recovery RC register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Crrcr(pub u32); - impl Crrcr { - #[doc = "48MHz HSI clock enable bit"] - pub const fn hsi48on(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; - val != 0 - } - #[doc = "48MHz HSI clock enable bit"] - pub fn set_hsi48on(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); - } - #[doc = "48MHz HSI clock ready flag"] - pub const fn hsi48rdy(&self) -> bool { - let val = (self.0 >> 1usize) & 0x01; - val != 0 - } - #[doc = "48MHz HSI clock ready flag"] - pub fn set_hsi48rdy(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); - } - #[doc = "48 MHz HSI clock divided by 6 output enable"] - pub const fn hsi48div6en(&self) -> bool { - let val = (self.0 >> 2usize) & 0x01; - val != 0 - } - #[doc = "48 MHz HSI clock divided by 6 output enable"] - pub fn set_hsi48div6en(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); - } - #[doc = "48 MHz HSI clock calibration"] - pub const fn hsi48cal(&self) -> u8 { - let val = (self.0 >> 8usize) & 0xff; - val as u8 - } - #[doc = "48 MHz HSI clock calibration"] - pub fn set_hsi48cal(&mut self, val: u8) { - self.0 = (self.0 & !(0xff << 8usize)) | (((val as u32) & 0xff) << 8usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Pll1fracen(pub u8); + impl Pll1fracen { + #[doc = "Reset latch to tranfer FRACN to the Sigma-Delta modulator"] + pub const RESET: Self = Self(0); + #[doc = "Set latch to tranfer FRACN to the Sigma-Delta modulator"] + pub const SET: Self = Self(0x01); } - impl Default for Crrcr { - fn default() -> Crrcr { - Crrcr(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct I2c4sel(pub u8); + impl I2c4sel { + #[doc = "rcc_pclk4 selected as peripheral clock"] + pub const RCC_PCLK4: Self = Self(0); + #[doc = "pll3_r selected as peripheral clock"] + pub const PLL3_R: Self = Self(0x01); + #[doc = "hsi_ker selected as peripheral clock"] + pub const HSI_KER: Self = Self(0x02); + #[doc = "csi_ker selected as peripheral clock"] + pub const CSI_KER: Self = Self(0x03); } - #[doc = "AHB peripheral clock enable register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ahbenr(pub u32); - impl Ahbenr { - #[doc = "DMA clock enable bit"] - pub const fn dmaen(&self) -> super::vals::Crypen { - let val = (self.0 >> 0usize) & 0x01; - super::vals::Crypen(val as u8) - } - #[doc = "DMA clock enable bit"] - pub fn set_dmaen(&mut self, val: super::vals::Crypen) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); - } - #[doc = "NVM interface clock enable bit"] - pub const fn mifen(&self) -> super::vals::Crypen { - let val = (self.0 >> 8usize) & 0x01; - super::vals::Crypen(val as u8) - } - #[doc = "NVM interface clock enable bit"] - pub fn set_mifen(&mut self, val: super::vals::Crypen) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); - } - #[doc = "CRC clock enable bit"] - pub const fn crcen(&self) -> super::vals::Crypen { - let val = (self.0 >> 12usize) & 0x01; - super::vals::Crypen(val as u8) - } - #[doc = "CRC clock enable bit"] - pub fn set_crcen(&mut self, val: super::vals::Crypen) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); - } - #[doc = "Touch Sensing clock enable bit"] - pub const fn touchen(&self) -> super::vals::Crypen { - let val = (self.0 >> 16usize) & 0x01; - super::vals::Crypen(val as u8) - } - #[doc = "Touch Sensing clock enable bit"] - pub fn set_touchen(&mut self, val: super::vals::Crypen) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); - } - #[doc = "Random Number Generator clock enable bit"] - pub const fn rngen(&self) -> super::vals::Crypen { - let val = (self.0 >> 20usize) & 0x01; - super::vals::Crypen(val as u8) - } - #[doc = "Random Number Generator clock enable bit"] - pub fn set_rngen(&mut self, val: super::vals::Crypen) { - self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize); - } - #[doc = "Crypto clock enable bit"] - pub const fn crypen(&self) -> super::vals::Crypen { - let val = (self.0 >> 24usize) & 0x01; - super::vals::Crypen(val as u8) - } - #[doc = "Crypto clock enable bit"] - pub fn set_crypen(&mut self, val: super::vals::Crypen) { - self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Lpuart1sel(pub u8); + impl Lpuart1sel { + #[doc = "rcc_pclk_d3 selected as peripheral clock"] + pub const RCC_PCLK_D3: Self = Self(0); + #[doc = "pll2_q selected as peripheral clock"] + pub const PLL2_Q: Self = Self(0x01); + #[doc = "pll3_q selected as peripheral clock"] + pub const PLL3_Q: Self = Self(0x02); + #[doc = "hsi_ker selected as peripheral clock"] + pub const HSI_KER: Self = Self(0x03); + #[doc = "csi_ker selected as peripheral clock"] + pub const CSI_KER: Self = Self(0x04); + #[doc = "LSE selected as peripheral clock"] + pub const LSE: Self = Self(0x05); } - impl Default for Ahbenr { - fn default() -> Ahbenr { - Ahbenr(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Sw(pub u8); + impl Sw { + #[doc = "HSI selected as system clock"] + pub const HSI: Self = Self(0); + #[doc = "CSI selected as system clock"] + pub const CSI: Self = Self(0x01); + #[doc = "HSE selected as system clock"] + pub const HSE: Self = Self(0x02); + #[doc = "PLL1 selected as system clock"] + pub const PLL1: Self = Self(0x03); } - #[doc = "GPIO clock enable in sleep mode register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Iopsmen(pub u32); - impl Iopsmen { - #[doc = "IOPASMEN"] - pub const fn iopasmen(&self) -> super::vals::Iophsmen { - let val = (self.0 >> 0usize) & 0x01; - super::vals::Iophsmen(val as u8) - } - #[doc = "IOPASMEN"] - pub fn set_iopasmen(&mut self, val: super::vals::Iophsmen) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); - } - #[doc = "IOPBSMEN"] - pub const fn iopbsmen(&self) -> super::vals::Iophsmen { - let val = (self.0 >> 1usize) & 0x01; - super::vals::Iophsmen(val as u8) - } - #[doc = "IOPBSMEN"] - pub fn set_iopbsmen(&mut self, val: super::vals::Iophsmen) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); - } - #[doc = "IOPCSMEN"] - pub const fn iopcsmen(&self) -> super::vals::Iophsmen { - let val = (self.0 >> 2usize) & 0x01; - super::vals::Iophsmen(val as u8) - } - #[doc = "IOPCSMEN"] - pub fn set_iopcsmen(&mut self, val: super::vals::Iophsmen) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); - } - #[doc = "IOPDSMEN"] - pub const fn iopdsmen(&self) -> super::vals::Iophsmen { - let val = (self.0 >> 3usize) & 0x01; - super::vals::Iophsmen(val as u8) - } - #[doc = "IOPDSMEN"] - pub fn set_iopdsmen(&mut self, val: super::vals::Iophsmen) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); - } - #[doc = "Port E clock enable during Sleep mode bit"] - pub const fn iopesmen(&self) -> super::vals::Iophsmen { - let val = (self.0 >> 4usize) & 0x01; - super::vals::Iophsmen(val as u8) - } - #[doc = "Port E clock enable during Sleep mode bit"] - pub fn set_iopesmen(&mut self, val: super::vals::Iophsmen) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); - } - #[doc = "IOPHSMEN"] - pub const fn iophsmen(&self) -> super::vals::Iophsmen { - let val = (self.0 >> 7usize) & 0x01; - super::vals::Iophsmen(val as u8) - } - #[doc = "IOPHSMEN"] - pub fn set_iophsmen(&mut self, val: super::vals::Iophsmen) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct I2c123sel(pub u8); + impl I2c123sel { + #[doc = "rcc_pclk1 selected as peripheral clock"] + pub const RCC_PCLK1: Self = Self(0); + #[doc = "pll3_r selected as peripheral clock"] + pub const PLL3_R: Self = Self(0x01); + #[doc = "hsi_ker selected as peripheral clock"] + pub const HSI_KER: Self = Self(0x02); + #[doc = "csi_ker selected as peripheral clock"] + pub const CSI_KER: Self = Self(0x03); } - impl Default for Iopsmen { - fn default() -> Iopsmen { - Iopsmen(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Crsrst(pub u8); + impl Crsrst { + #[doc = "Reset the selected module"] + pub const RESET: Self = Self(0x01); } - #[doc = "Clock configuration register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ccipr(pub u32); - impl Ccipr { - #[doc = "USART1 clock source selection bits"] - pub const fn usart1sel(&self) -> super::vals::Lpuartsel { - let val = (self.0 >> 0usize) & 0x03; - super::vals::Lpuartsel(val as u8) - } - #[doc = "USART1 clock source selection bits"] - pub fn set_usart1sel(&mut self, val: super::vals::Lpuartsel) { - self.0 = (self.0 & !(0x03 << 0usize)) | (((val.0 as u32) & 0x03) << 0usize); - } - #[doc = "USART2 clock source selection bits"] - pub const fn usart2sel(&self) -> super::vals::Lpuartsel { - let val = (self.0 >> 2usize) & 0x03; - super::vals::Lpuartsel(val as u8) - } - #[doc = "USART2 clock source selection bits"] - pub fn set_usart2sel(&mut self, val: super::vals::Lpuartsel) { - self.0 = (self.0 & !(0x03 << 2usize)) | (((val.0 as u32) & 0x03) << 2usize); - } - #[doc = "LPUART1 clock source selection bits"] - pub const fn lpuart1sel(&self) -> super::vals::Lpuartsel { - let val = (self.0 >> 10usize) & 0x03; - super::vals::Lpuartsel(val as u8) - } - #[doc = "LPUART1 clock source selection bits"] - pub fn set_lpuart1sel(&mut self, val: super::vals::Lpuartsel) { - self.0 = (self.0 & !(0x03 << 10usize)) | (((val.0 as u32) & 0x03) << 10usize); - } - #[doc = "I2C1 clock source selection bits"] - pub const fn i2c1sel(&self) -> super::vals::Icsel { - let val = (self.0 >> 12usize) & 0x03; - super::vals::Icsel(val as u8) - } - #[doc = "I2C1 clock source selection bits"] - pub fn set_i2c1sel(&mut self, val: super::vals::Icsel) { - self.0 = (self.0 & !(0x03 << 12usize)) | (((val.0 as u32) & 0x03) << 12usize); - } - #[doc = "I2C3 clock source selection bits"] - pub const fn i2c3sel(&self) -> super::vals::Icsel { - let val = (self.0 >> 16usize) & 0x03; - super::vals::Icsel(val as u8) - } - #[doc = "I2C3 clock source selection bits"] - pub fn set_i2c3sel(&mut self, val: super::vals::Icsel) { - self.0 = (self.0 & !(0x03 << 16usize)) | (((val.0 as u32) & 0x03) << 16usize); - } - #[doc = "Low Power Timer clock source selection bits"] - pub const fn lptim1sel(&self) -> super::vals::Lptimsel { - let val = (self.0 >> 18usize) & 0x03; - super::vals::Lptimsel(val as u8) - } - #[doc = "Low Power Timer clock source selection bits"] - pub fn set_lptim1sel(&mut self, val: super::vals::Lptimsel) { - self.0 = (self.0 & !(0x03 << 18usize)) | (((val.0 as u32) & 0x03) << 18usize); - } - #[doc = "48 MHz HSI48 clock source selection bit"] - pub const fn hsi48msel(&self) -> bool { - let val = (self.0 >> 26usize) & 0x01; - val != 0 - } - #[doc = "48 MHz HSI48 clock source selection bit"] - pub fn set_hsi48msel(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Apb1hlpenrCrslpen(pub u8); + impl Apb1hlpenrCrslpen { + #[doc = "The selected clock is disabled during csleep mode"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled during csleep mode"] + pub const ENABLED: Self = Self(0x01); } - impl Default for Ccipr { - fn default() -> Ccipr { - Ccipr(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Lsedrv(pub u8); + impl Lsedrv { + #[doc = "Lowest LSE oscillator driving capability"] + pub const LOWEST: Self = Self(0); + #[doc = "Medium low LSE oscillator driving capability"] + pub const MEDIUMLOW: Self = Self(0x01); + #[doc = "Medium high LSE oscillator driving capability"] + pub const MEDIUMHIGH: Self = Self(0x02); + #[doc = "Highest LSE oscillator driving capability"] + pub const HIGHEST: Self = Self(0x03); } - #[doc = "Clock control register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr(pub u32); - impl Cr { - #[doc = "16 MHz high-speed internal clock enable"] - pub const fn hsi16on(&self) -> super::vals::Pllon { - let val = (self.0 >> 0usize) & 0x01; - super::vals::Pllon(val as u8) - } - #[doc = "16 MHz high-speed internal clock enable"] - pub fn set_hsi16on(&mut self, val: super::vals::Pllon) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); - } - #[doc = "High-speed internal clock enable bit for some IP kernels"] - pub const fn hsi16keron(&self) -> super::vals::Pllon { - let val = (self.0 >> 1usize) & 0x01; - super::vals::Pllon(val as u8) - } - #[doc = "High-speed internal clock enable bit for some IP kernels"] - pub fn set_hsi16keron(&mut self, val: super::vals::Pllon) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); - } - #[doc = "Internal high-speed clock ready flag"] - pub const fn hsi16rdyf(&self) -> bool { - let val = (self.0 >> 2usize) & 0x01; - val != 0 - } - #[doc = "Internal high-speed clock ready flag"] - pub fn set_hsi16rdyf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); - } - #[doc = "HSI16DIVEN"] - pub const fn hsi16diven(&self) -> super::vals::Hsidiven { - let val = (self.0 >> 3usize) & 0x01; - super::vals::Hsidiven(val as u8) - } - #[doc = "HSI16DIVEN"] - pub fn set_hsi16diven(&mut self, val: super::vals::Hsidiven) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); - } - #[doc = "HSI16DIVF"] - pub const fn hsi16divf(&self) -> bool { - let val = (self.0 >> 4usize) & 0x01; - val != 0 - } - #[doc = "HSI16DIVF"] - pub fn set_hsi16divf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); - } - #[doc = "16 MHz high-speed internal clock output enable"] - pub const fn hsi16outen(&self) -> super::vals::Hsiouten { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Hsiouten(val as u8) - } - #[doc = "16 MHz high-speed internal clock output enable"] - pub fn set_hsi16outen(&mut self, val: super::vals::Hsiouten) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); - } - #[doc = "MSI clock enable bit"] - pub const fn msion(&self) -> super::vals::Pllon { - let val = (self.0 >> 8usize) & 0x01; - super::vals::Pllon(val as u8) - } - #[doc = "MSI clock enable bit"] - pub fn set_msion(&mut self, val: super::vals::Pllon) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); - } - #[doc = "MSI clock ready flag"] - pub const fn msirdy(&self) -> bool { - let val = (self.0 >> 9usize) & 0x01; - val != 0 - } - #[doc = "MSI clock ready flag"] - pub fn set_msirdy(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); - } - #[doc = "HSE clock enable bit"] - pub const fn hseon(&self) -> super::vals::Pllon { - let val = (self.0 >> 16usize) & 0x01; - super::vals::Pllon(val as u8) - } - #[doc = "HSE clock enable bit"] - pub fn set_hseon(&mut self, val: super::vals::Pllon) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); - } - #[doc = "HSE clock ready flag"] - pub const fn hserdy(&self) -> bool { - let val = (self.0 >> 17usize) & 0x01; - val != 0 - } - #[doc = "HSE clock ready flag"] - pub fn set_hserdy(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); - } - #[doc = "HSE clock bypass bit"] - pub const fn hsebyp(&self) -> super::vals::Hsebyp { - let val = (self.0 >> 18usize) & 0x01; - super::vals::Hsebyp(val as u8) - } - #[doc = "HSE clock bypass bit"] - pub fn set_hsebyp(&mut self, val: super::vals::Hsebyp) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); - } - #[doc = "Clock security system on HSE enable bit"] - pub const fn csshseon(&self) -> super::vals::Pllon { - let val = (self.0 >> 19usize) & 0x01; - super::vals::Pllon(val as u8) - } - #[doc = "Clock security system on HSE enable bit"] - pub fn set_csshseon(&mut self, val: super::vals::Pllon) { - self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); - } - #[doc = "TC/LCD prescaler"] - pub const fn rtcpre(&self) -> super::vals::Rtcpre { - let val = (self.0 >> 20usize) & 0x03; - super::vals::Rtcpre(val as u8) - } - #[doc = "TC/LCD prescaler"] - pub fn set_rtcpre(&mut self, val: super::vals::Rtcpre) { - self.0 = (self.0 & !(0x03 << 20usize)) | (((val.0 as u32) & 0x03) << 20usize); - } - #[doc = "PLL enable bit"] - pub const fn pllon(&self) -> super::vals::Pllon { - let val = (self.0 >> 24usize) & 0x01; - super::vals::Pllon(val as u8) - } - #[doc = "PLL enable bit"] - pub fn set_pllon(&mut self, val: super::vals::Pllon) { - self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); - } - #[doc = "PLL clock ready flag"] - pub const fn pllrdy(&self) -> bool { - let val = (self.0 >> 25usize) & 0x01; - val != 0 - } - #[doc = "PLL clock ready flag"] - pub fn set_pllrdy(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize); - } - } - impl Default for Cr { - fn default() -> Cr { - Cr(0) - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Ahb2lpenrDcmilpen(pub u8); + impl Ahb2lpenrDcmilpen { + #[doc = "The selected clock is disabled during csleep mode"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled during csleep mode"] + pub const ENABLED: Self = Self(0x01); } - #[doc = "APB2 peripheral clock enable register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Apb2enr(pub u32); - impl Apb2enr { - #[doc = "System configuration controller clock enable bit"] - pub const fn syscfgen(&self) -> super::vals::Dbgen { - let val = (self.0 >> 0usize) & 0x01; - super::vals::Dbgen(val as u8) - } - #[doc = "System configuration controller clock enable bit"] - pub fn set_syscfgen(&mut self, val: super::vals::Dbgen) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); - } - #[doc = "TIM21 timer clock enable bit"] - pub const fn tim21en(&self) -> super::vals::Dbgen { - let val = (self.0 >> 2usize) & 0x01; - super::vals::Dbgen(val as u8) - } - #[doc = "TIM21 timer clock enable bit"] - pub fn set_tim21en(&mut self, val: super::vals::Dbgen) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); - } - #[doc = "TIM22 timer clock enable bit"] - pub const fn tim22en(&self) -> super::vals::Dbgen { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Dbgen(val as u8) - } - #[doc = "TIM22 timer clock enable bit"] - pub fn set_tim22en(&mut self, val: super::vals::Dbgen) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); - } - #[doc = "MiFaRe Firewall clock enable bit"] - pub const fn mifien(&self) -> super::vals::Dbgen { - let val = (self.0 >> 7usize) & 0x01; - super::vals::Dbgen(val as u8) - } - #[doc = "MiFaRe Firewall clock enable bit"] - pub fn set_mifien(&mut self, val: super::vals::Dbgen) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); - } - #[doc = "ADC clock enable bit"] - pub const fn adcen(&self) -> super::vals::Dbgen { - let val = (self.0 >> 9usize) & 0x01; - super::vals::Dbgen(val as u8) - } - #[doc = "ADC clock enable bit"] - pub fn set_adcen(&mut self, val: super::vals::Dbgen) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); - } - #[doc = "SPI1 clock enable bit"] - pub const fn spi1en(&self) -> super::vals::Dbgen { - let val = (self.0 >> 12usize) & 0x01; - super::vals::Dbgen(val as u8) - } - #[doc = "SPI1 clock enable bit"] - pub fn set_spi1en(&mut self, val: super::vals::Dbgen) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); - } - #[doc = "USART1 clock enable bit"] - pub const fn usart1en(&self) -> super::vals::Dbgen { - let val = (self.0 >> 14usize) & 0x01; - super::vals::Dbgen(val as u8) - } - #[doc = "USART1 clock enable bit"] - pub fn set_usart1en(&mut self, val: super::vals::Dbgen) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); - } - #[doc = "DBG clock enable bit"] - pub const fn dbgen(&self) -> super::vals::Dbgen { - let val = (self.0 >> 22usize) & 0x01; - super::vals::Dbgen(val as u8) - } - #[doc = "DBG clock enable bit"] - pub fn set_dbgen(&mut self, val: super::vals::Dbgen) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Pll1rge(pub u8); + impl Pll1rge { + #[doc = "Frequency is between 1 and 2 MHz"] + pub const RANGE1: Self = Self(0); + #[doc = "Frequency is between 2 and 4 MHz"] + pub const RANGE2: Self = Self(0x01); + #[doc = "Frequency is between 4 and 8 MHz"] + pub const RANGE4: Self = Self(0x02); + #[doc = "Frequency is between 8 and 16 MHz"] + pub const RANGE8: Self = Self(0x03); } - impl Default for Apb2enr { - fn default() -> Apb2enr { - Apb2enr(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Dfsdm1sel(pub u8); + impl Dfsdm1sel { + #[doc = "rcc_pclk2 selected as peripheral clock"] + pub const RCC_PCLK2: Self = Self(0); + #[doc = "System clock selected as peripheral clock"] + pub const SYS: Self = Self(0x01); } - #[doc = "GPIO reset register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ioprstr(pub u32); - impl Ioprstr { - #[doc = "I/O port A reset"] - pub const fn ioparst(&self) -> super::vals::Iophrst { - let val = (self.0 >> 0usize) & 0x01; - super::vals::Iophrst(val as u8) - } - #[doc = "I/O port A reset"] - pub fn set_ioparst(&mut self, val: super::vals::Iophrst) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); - } - #[doc = "I/O port B reset"] - pub const fn iopbrst(&self) -> super::vals::Iophrst { - let val = (self.0 >> 1usize) & 0x01; - super::vals::Iophrst(val as u8) - } - #[doc = "I/O port B reset"] - pub fn set_iopbrst(&mut self, val: super::vals::Iophrst) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); - } - #[doc = "I/O port A reset"] - pub const fn iopcrst(&self) -> super::vals::Iophrst { - let val = (self.0 >> 2usize) & 0x01; - super::vals::Iophrst(val as u8) - } - #[doc = "I/O port A reset"] - pub fn set_iopcrst(&mut self, val: super::vals::Iophrst) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); - } - #[doc = "I/O port D reset"] - pub const fn iopdrst(&self) -> super::vals::Iophrst { - let val = (self.0 >> 3usize) & 0x01; - super::vals::Iophrst(val as u8) - } - #[doc = "I/O port D reset"] - pub fn set_iopdrst(&mut self, val: super::vals::Iophrst) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); - } - #[doc = "I/O port E reset"] - pub const fn ioperst(&self) -> super::vals::Iophrst { - let val = (self.0 >> 4usize) & 0x01; - super::vals::Iophrst(val as u8) - } - #[doc = "I/O port E reset"] - pub fn set_ioperst(&mut self, val: super::vals::Iophrst) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); - } - #[doc = "I/O port H reset"] - pub const fn iophrst(&self) -> super::vals::Iophrst { - let val = (self.0 >> 7usize) & 0x01; - super::vals::Iophrst(val as u8) - } - #[doc = "I/O port H reset"] - pub fn set_iophrst(&mut self, val: super::vals::Iophrst) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct C1Ahb3enrMdmaen(pub u8); + impl C1Ahb3enrMdmaen { + #[doc = "The selected clock is disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "The selected clock is enabled"] + pub const ENABLED: Self = Self(0x01); } - impl Default for Ioprstr { - fn default() -> Ioprstr { - Ioprstr(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct D3ppre(pub u8); + impl D3ppre { + #[doc = "rcc_hclk not divided"] + pub const DIV1: Self = Self(0); + #[doc = "rcc_hclk divided by 2"] + pub const DIV2: Self = Self(0x04); + #[doc = "rcc_hclk divided by 4"] + pub const DIV4: Self = Self(0x05); + #[doc = "rcc_hclk divided by 8"] + pub const DIV8: Self = Self(0x06); + #[doc = "rcc_hclk divided by 16"] + pub const DIV16: Self = Self(0x07); } - #[doc = "Clock interrupt clear register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cicr(pub u32); - impl Cicr { - #[doc = "LSI ready Interrupt clear"] - pub const fn lsirdyc(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; - val != 0 - } - #[doc = "LSI ready Interrupt clear"] - pub fn set_lsirdyc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); - } - #[doc = "LSE ready Interrupt clear"] - pub const fn lserdyc(&self) -> bool { - let val = (self.0 >> 1usize) & 0x01; - val != 0 - } - #[doc = "LSE ready Interrupt clear"] - pub fn set_lserdyc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); - } - #[doc = "HSI16 ready Interrupt clear"] - pub const fn hsi16rdyc(&self) -> bool { - let val = (self.0 >> 2usize) & 0x01; - val != 0 - } - #[doc = "HSI16 ready Interrupt clear"] - pub fn set_hsi16rdyc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); - } - #[doc = "HSE ready Interrupt clear"] - pub const fn hserdyc(&self) -> bool { - let val = (self.0 >> 3usize) & 0x01; - val != 0 - } - #[doc = "HSE ready Interrupt clear"] - pub fn set_hserdyc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); - } - #[doc = "PLL ready Interrupt clear"] - pub const fn pllrdyc(&self) -> bool { - let val = (self.0 >> 4usize) & 0x01; - val != 0 - } - #[doc = "PLL ready Interrupt clear"] - pub fn set_pllrdyc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); - } - #[doc = "MSI ready Interrupt clear"] - pub const fn msirdyc(&self) -> bool { - let val = (self.0 >> 5usize) & 0x01; - val != 0 - } - #[doc = "MSI ready Interrupt clear"] - pub fn set_msirdyc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); - } - #[doc = "HSI48 ready Interrupt clear"] - pub const fn hsi48rdyc(&self) -> bool { - let val = (self.0 >> 6usize) & 0x01; - val != 0 - } - #[doc = "HSI48 ready Interrupt clear"] - pub fn set_hsi48rdyc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); - } - #[doc = "LSE Clock Security System Interrupt clear"] - pub const fn csslsec(&self) -> bool { - let val = (self.0 >> 7usize) & 0x01; - val != 0 - } - #[doc = "LSE Clock Security System Interrupt clear"] - pub fn set_csslsec(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); - } - #[doc = "Clock Security System Interrupt clear"] - pub const fn csshsec(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; - val != 0 - } - #[doc = "Clock Security System Interrupt clear"] - pub fn set_csshsec(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Hsidiv(pub u8); + impl Hsidiv { + #[doc = "No division"] + pub const DIV1: Self = Self(0); + #[doc = "Division by 2"] + pub const DIV2: Self = Self(0x01); + #[doc = "Division by 4"] + pub const DIV4: Self = Self(0x02); + #[doc = "Division by 8"] + pub const DIV8: Self = Self(0x03); } - impl Default for Cicr { - fn default() -> Cicr { - Cicr(0) - } + } +} +pub mod dma_v1 { + use crate::generic::*; + #[doc = "Channel cluster: CCR?, CNDTR?, CPAR?, and CMAR? registers"] + #[derive(Copy, Clone)] + pub struct Ch(pub *mut u8); + unsafe impl Send for Ch {} + unsafe impl Sync for Ch {} + impl Ch { + #[doc = "DMA channel configuration register (DMA_CCR)"] + pub fn cr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(0usize)) } } - #[doc = "Internal clock sources calibration register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Icscr(pub u32); - impl Icscr { - #[doc = "nternal high speed clock calibration"] - pub const fn hsi16cal(&self) -> u8 { - let val = (self.0 >> 0usize) & 0xff; - val as u8 - } - #[doc = "nternal high speed clock calibration"] - pub fn set_hsi16cal(&mut self, val: u8) { - self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize); - } - #[doc = "High speed internal clock trimming"] - pub const fn hsi16trim(&self) -> u8 { - let val = (self.0 >> 8usize) & 0x1f; - val as u8 - } - #[doc = "High speed internal clock trimming"] - pub fn set_hsi16trim(&mut self, val: u8) { - self.0 = (self.0 & !(0x1f << 8usize)) | (((val as u32) & 0x1f) << 8usize); - } - #[doc = "MSI clock ranges"] - pub const fn msirange(&self) -> super::vals::Msirange { - let val = (self.0 >> 13usize) & 0x07; - super::vals::Msirange(val as u8) - } - #[doc = "MSI clock ranges"] - pub fn set_msirange(&mut self, val: super::vals::Msirange) { - self.0 = (self.0 & !(0x07 << 13usize)) | (((val.0 as u32) & 0x07) << 13usize); - } - #[doc = "MSI clock calibration"] - pub const fn msical(&self) -> u8 { - let val = (self.0 >> 16usize) & 0xff; - val as u8 - } - #[doc = "MSI clock calibration"] - pub fn set_msical(&mut self, val: u8) { - self.0 = (self.0 & !(0xff << 16usize)) | (((val as u32) & 0xff) << 16usize); - } - #[doc = "MSI clock trimming"] - pub const fn msitrim(&self) -> u8 { - let val = (self.0 >> 24usize) & 0xff; - val as u8 - } - #[doc = "MSI clock trimming"] - pub fn set_msitrim(&mut self, val: u8) { - self.0 = (self.0 & !(0xff << 24usize)) | (((val as u32) & 0xff) << 24usize); - } + #[doc = "DMA channel 1 number of data register"] + pub fn ndtr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(4usize)) } + } + #[doc = "DMA channel 1 peripheral address register"] + pub fn par(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(8usize)) } + } + #[doc = "DMA channel 1 memory address register"] + pub fn mar(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(12usize)) } } - impl Default for Icscr { - fn default() -> Icscr { - Icscr(0) - } + } + #[doc = "DMA controller"] + #[derive(Copy, Clone)] + pub struct Dma(pub *mut u8); + unsafe impl Send for Dma {} + unsafe impl Sync for Dma {} + impl Dma { + #[doc = "DMA interrupt status register (DMA_ISR)"] + pub fn isr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(0usize)) } } - #[doc = "GPIO clock enable register"] + #[doc = "DMA interrupt flag clear register (DMA_IFCR)"] + pub fn ifcr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(4usize)) } + } + #[doc = "Channel cluster: CCR?, CNDTR?, CPAR?, and CMAR? registers"] + pub fn ch(self, n: usize) -> Ch { + assert!(n < 7usize); + unsafe { Ch(self.0.add(8usize + n * 20usize)) } + } + } + pub mod vals { + use crate::generic::*; #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Iopenr(pub u32); - impl Iopenr { - #[doc = "IO port A clock enable bit"] - pub const fn iopaen(&self) -> super::vals::Iophen { - let val = (self.0 >> 0usize) & 0x01; - super::vals::Iophen(val as u8) - } - #[doc = "IO port A clock enable bit"] - pub fn set_iopaen(&mut self, val: super::vals::Iophen) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); - } - #[doc = "IO port B clock enable bit"] - pub const fn iopben(&self) -> super::vals::Iophen { - let val = (self.0 >> 1usize) & 0x01; - super::vals::Iophen(val as u8) - } - #[doc = "IO port B clock enable bit"] - pub fn set_iopben(&mut self, val: super::vals::Iophen) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); - } - #[doc = "IO port A clock enable bit"] - pub const fn iopcen(&self) -> super::vals::Iophen { - let val = (self.0 >> 2usize) & 0x01; - super::vals::Iophen(val as u8) - } - #[doc = "IO port A clock enable bit"] - pub fn set_iopcen(&mut self, val: super::vals::Iophen) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); - } - #[doc = "I/O port D clock enable bit"] - pub const fn iopden(&self) -> super::vals::Iophen { - let val = (self.0 >> 3usize) & 0x01; - super::vals::Iophen(val as u8) - } - #[doc = "I/O port D clock enable bit"] - pub fn set_iopden(&mut self, val: super::vals::Iophen) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); - } - #[doc = "I/O port E clock enable bit"] - pub const fn iopeen(&self) -> super::vals::Iophen { - let val = (self.0 >> 4usize) & 0x01; - super::vals::Iophen(val as u8) - } - #[doc = "I/O port E clock enable bit"] - pub fn set_iopeen(&mut self, val: super::vals::Iophen) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); - } - #[doc = "I/O port H clock enable bit"] - pub const fn iophen(&self) -> super::vals::Iophen { - let val = (self.0 >> 7usize) & 0x01; - super::vals::Iophen(val as u8) - } - #[doc = "I/O port H clock enable bit"] - pub fn set_iophen(&mut self, val: super::vals::Iophen) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Size(pub u8); + impl Size { + #[doc = "8-bit size"] + pub const BITS8: Self = Self(0); + #[doc = "16-bit size"] + pub const BITS16: Self = Self(0x01); + #[doc = "32-bit size"] + pub const BITS32: Self = Self(0x02); } - impl Default for Iopenr { - fn default() -> Iopenr { - Iopenr(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Inc(pub u8); + impl Inc { + #[doc = "Increment mode disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "Increment mode enabled"] + pub const ENABLED: Self = Self(0x01); } - #[doc = "APB2 peripheral clock enable in sleep mode register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Apb2smenr(pub u32); - impl Apb2smenr { - #[doc = "System configuration controller clock enable during sleep mode bit"] - pub const fn syscfgsmen(&self) -> super::vals::Dbgsmen { - let val = (self.0 >> 0usize) & 0x01; - super::vals::Dbgsmen(val as u8) - } - #[doc = "System configuration controller clock enable during sleep mode bit"] - pub fn set_syscfgsmen(&mut self, val: super::vals::Dbgsmen) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); - } - #[doc = "TIM21 timer clock enable during sleep mode bit"] - pub const fn tim21smen(&self) -> super::vals::Dbgsmen { - let val = (self.0 >> 2usize) & 0x01; - super::vals::Dbgsmen(val as u8) - } - #[doc = "TIM21 timer clock enable during sleep mode bit"] - pub fn set_tim21smen(&mut self, val: super::vals::Dbgsmen) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); - } - #[doc = "TIM22 timer clock enable during sleep mode bit"] - pub const fn tim22smen(&self) -> super::vals::Dbgsmen { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Dbgsmen(val as u8) - } - #[doc = "TIM22 timer clock enable during sleep mode bit"] - pub fn set_tim22smen(&mut self, val: super::vals::Dbgsmen) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); - } - #[doc = "ADC clock enable during sleep mode bit"] - pub const fn adcsmen(&self) -> super::vals::Dbgsmen { - let val = (self.0 >> 9usize) & 0x01; - super::vals::Dbgsmen(val as u8) - } - #[doc = "ADC clock enable during sleep mode bit"] - pub fn set_adcsmen(&mut self, val: super::vals::Dbgsmen) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); - } - #[doc = "SPI1 clock enable during sleep mode bit"] - pub const fn spi1smen(&self) -> super::vals::Dbgsmen { - let val = (self.0 >> 12usize) & 0x01; - super::vals::Dbgsmen(val as u8) - } - #[doc = "SPI1 clock enable during sleep mode bit"] - pub fn set_spi1smen(&mut self, val: super::vals::Dbgsmen) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); - } - #[doc = "USART1 clock enable during sleep mode bit"] - pub const fn usart1smen(&self) -> super::vals::Dbgsmen { - let val = (self.0 >> 14usize) & 0x01; - super::vals::Dbgsmen(val as u8) - } - #[doc = "USART1 clock enable during sleep mode bit"] - pub fn set_usart1smen(&mut self, val: super::vals::Dbgsmen) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); - } - #[doc = "DBG clock enable during sleep mode bit"] - pub const fn dbgsmen(&self) -> super::vals::Dbgsmen { - let val = (self.0 >> 22usize) & 0x01; - super::vals::Dbgsmen(val as u8) - } - #[doc = "DBG clock enable during sleep mode bit"] - pub fn set_dbgsmen(&mut self, val: super::vals::Dbgsmen) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); - } + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Memmem(pub u8); + impl Memmem { + #[doc = "Memory to memory mode disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "Memory to memory mode enabled"] + pub const ENABLED: Self = Self(0x01); } - impl Default for Apb2smenr { - fn default() -> Apb2smenr { - Apb2smenr(0) - } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Dir(pub u8); + impl Dir { + #[doc = "Read from peripheral"] + pub const FROMPERIPHERAL: Self = Self(0); + #[doc = "Read from memory"] + pub const FROMMEMORY: Self = Self(0x01); } - #[doc = "AHB peripheral reset register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Pl(pub u8); + impl Pl { + #[doc = "Low priority"] + pub const LOW: Self = Self(0); + #[doc = "Medium priority"] + pub const MEDIUM: Self = Self(0x01); + #[doc = "High priority"] + pub const HIGH: Self = Self(0x02); + #[doc = "Very high priority"] + pub const VERYHIGH: Self = Self(0x03); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Circ(pub u8); + impl Circ { + #[doc = "Circular buffer disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "Circular buffer enabled"] + pub const ENABLED: Self = Self(0x01); + } + } + pub mod regs { + use crate::generic::*; + #[doc = "DMA interrupt status register (DMA_ISR)"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ahbrstr(pub u32); - impl Ahbrstr { - #[doc = "DMA reset"] - pub const fn dmarst(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; - val != 0 - } - #[doc = "DMA reset"] - pub fn set_dmarst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); - } - #[doc = "Memory interface reset"] - pub const fn mifrst(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; - val != 0 - } - #[doc = "Memory interface reset"] - pub fn set_mifrst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); - } - #[doc = "Test integration module reset"] - pub const fn crcrst(&self) -> bool { - let val = (self.0 >> 12usize) & 0x01; + pub struct Isr(pub u32); + impl Isr { + #[doc = "Channel 1 Global interrupt flag"] + pub fn gif(&self, n: usize) -> bool { + assert!(n < 7usize); + let offs = 0usize + n * 4usize; + let val = (self.0 >> offs) & 0x01; val != 0 } - #[doc = "Test integration module reset"] - pub fn set_crcrst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); + #[doc = "Channel 1 Global interrupt flag"] + pub fn set_gif(&mut self, n: usize, val: bool) { + assert!(n < 7usize); + let offs = 0usize + n * 4usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "Touch Sensing reset"] - pub const fn touchrst(&self) -> bool { - let val = (self.0 >> 16usize) & 0x01; + #[doc = "Channel 1 Transfer Complete flag"] + pub fn tcif(&self, n: usize) -> bool { + assert!(n < 7usize); + let offs = 1usize + n * 4usize; + let val = (self.0 >> offs) & 0x01; val != 0 } - #[doc = "Touch Sensing reset"] - pub fn set_touchrst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + #[doc = "Channel 1 Transfer Complete flag"] + pub fn set_tcif(&mut self, n: usize, val: bool) { + assert!(n < 7usize); + let offs = 1usize + n * 4usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "Random Number Generator module reset"] - pub const fn rngrst(&self) -> bool { - let val = (self.0 >> 20usize) & 0x01; + #[doc = "Channel 1 Half Transfer Complete flag"] + pub fn htif(&self, n: usize) -> bool { + assert!(n < 7usize); + let offs = 2usize + n * 4usize; + let val = (self.0 >> offs) & 0x01; val != 0 } - #[doc = "Random Number Generator module reset"] - pub fn set_rngrst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize); + #[doc = "Channel 1 Half Transfer Complete flag"] + pub fn set_htif(&mut self, n: usize, val: bool) { + assert!(n < 7usize); + let offs = 2usize + n * 4usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "Crypto module reset"] - pub const fn cryprst(&self) -> bool { - let val = (self.0 >> 24usize) & 0x01; + #[doc = "Channel 1 Transfer Error flag"] + pub fn teif(&self, n: usize) -> bool { + assert!(n < 7usize); + let offs = 3usize + n * 4usize; + let val = (self.0 >> offs) & 0x01; val != 0 } - #[doc = "Crypto module reset"] - pub fn set_cryprst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize); + #[doc = "Channel 1 Transfer Error flag"] + pub fn set_teif(&mut self, n: usize, val: bool) { + assert!(n < 7usize); + let offs = 3usize + n * 4usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } } - impl Default for Ahbrstr { - fn default() -> Ahbrstr { - Ahbrstr(0) + impl Default for Isr { + fn default() -> Isr { + Isr(0) } } - #[doc = "AHB peripheral clock enable in sleep mode register"] + #[doc = "DMA channel 1 number of data register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ahbsmenr(pub u32); - impl Ahbsmenr { - #[doc = "DMA clock enable during sleep mode bit"] - pub const fn dmasmen(&self) -> super::vals::Dmasmen { - let val = (self.0 >> 0usize) & 0x01; - super::vals::Dmasmen(val as u8) - } - #[doc = "DMA clock enable during sleep mode bit"] - pub fn set_dmasmen(&mut self, val: super::vals::Dmasmen) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); - } - #[doc = "NVM interface clock enable during sleep mode bit"] - pub const fn mifsmen(&self) -> super::vals::Mifsmen { - let val = (self.0 >> 8usize) & 0x01; - super::vals::Mifsmen(val as u8) - } - #[doc = "NVM interface clock enable during sleep mode bit"] - pub fn set_mifsmen(&mut self, val: super::vals::Mifsmen) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); - } - #[doc = "SRAM interface clock enable during sleep mode bit"] - pub const fn sramsmen(&self) -> super::vals::Sramsmen { - let val = (self.0 >> 9usize) & 0x01; - super::vals::Sramsmen(val as u8) - } - #[doc = "SRAM interface clock enable during sleep mode bit"] - pub fn set_sramsmen(&mut self, val: super::vals::Sramsmen) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); - } - #[doc = "CRC clock enable during sleep mode bit"] - pub const fn crcsmen(&self) -> super::vals::Crcsmen { - let val = (self.0 >> 12usize) & 0x01; - super::vals::Crcsmen(val as u8) - } - #[doc = "CRC clock enable during sleep mode bit"] - pub fn set_crcsmen(&mut self, val: super::vals::Crcsmen) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); - } - #[doc = "Touch Sensing clock enable during sleep mode bit"] - pub const fn touchsmen(&self) -> bool { - let val = (self.0 >> 16usize) & 0x01; - val != 0 - } - #[doc = "Touch Sensing clock enable during sleep mode bit"] - pub fn set_touchsmen(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); - } - #[doc = "Random Number Generator clock enable during sleep mode bit"] - pub const fn rngsmen(&self) -> bool { - let val = (self.0 >> 20usize) & 0x01; - val != 0 - } - #[doc = "Random Number Generator clock enable during sleep mode bit"] - pub fn set_rngsmen(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize); - } - #[doc = "Crypto clock enable during sleep mode bit"] - pub const fn crypsmen(&self) -> super::vals::Crypsmen { - let val = (self.0 >> 24usize) & 0x01; - super::vals::Crypsmen(val as u8) + pub struct Ndtr(pub u32); + impl Ndtr { + #[doc = "Number of data to transfer"] + pub const fn ndt(&self) -> u16 { + let val = (self.0 >> 0usize) & 0xffff; + val as u16 } - #[doc = "Crypto clock enable during sleep mode bit"] - pub fn set_crypsmen(&mut self, val: super::vals::Crypsmen) { - self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); + #[doc = "Number of data to transfer"] + pub fn set_ndt(&mut self, val: u16) { + self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); } } - impl Default for Ahbsmenr { - fn default() -> Ahbsmenr { - Ahbsmenr(0) + impl Default for Ndtr { + fn default() -> Ndtr { + Ndtr(0) } } - #[doc = "APB1 peripheral clock enable in sleep mode register"] + #[doc = "DMA channel configuration register (DMA_CCR)"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Apb1smenr(pub u32); - impl Apb1smenr { - #[doc = "Timer2 clock enable during sleep mode bit"] - pub const fn tim2smen(&self) -> super::vals::Lptimsmen { + pub struct Cr(pub u32); + impl Cr { + #[doc = "Channel enable"] + pub const fn en(&self) -> bool { let val = (self.0 >> 0usize) & 0x01; - super::vals::Lptimsmen(val as u8) + val != 0 } - #[doc = "Timer2 clock enable during sleep mode bit"] - pub fn set_tim2smen(&mut self, val: super::vals::Lptimsmen) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + #[doc = "Channel enable"] + pub fn set_en(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "Timer3 clock enable during Sleep mode bit"] - pub const fn tim3smen(&self) -> super::vals::Lptimsmen { + #[doc = "Transfer complete interrupt enable"] + pub const fn tcie(&self) -> bool { let val = (self.0 >> 1usize) & 0x01; - super::vals::Lptimsmen(val as u8) - } - #[doc = "Timer3 clock enable during Sleep mode bit"] - pub fn set_tim3smen(&mut self, val: super::vals::Lptimsmen) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); - } - #[doc = "Timer 6 clock enable during sleep mode bit"] - pub const fn tim6smen(&self) -> super::vals::Lptimsmen { - let val = (self.0 >> 4usize) & 0x01; - super::vals::Lptimsmen(val as u8) - } - #[doc = "Timer 6 clock enable during sleep mode bit"] - pub fn set_tim6smen(&mut self, val: super::vals::Lptimsmen) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + val != 0 } - #[doc = "Timer 7 clock enable during Sleep mode bit"] - pub const fn tim7smen(&self) -> super::vals::Lptimsmen { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Lptimsmen(val as u8) + #[doc = "Transfer complete interrupt enable"] + pub fn set_tcie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - #[doc = "Timer 7 clock enable during Sleep mode bit"] - pub fn set_tim7smen(&mut self, val: super::vals::Lptimsmen) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + #[doc = "Half Transfer interrupt enable"] + pub const fn htie(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; + val != 0 } - #[doc = "Window watchdog clock enable during sleep mode bit"] - pub const fn wwdgsmen(&self) -> super::vals::Lptimsmen { - let val = (self.0 >> 11usize) & 0x01; - super::vals::Lptimsmen(val as u8) + #[doc = "Half Transfer interrupt enable"] + pub fn set_htie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); } - #[doc = "Window watchdog clock enable during sleep mode bit"] - pub fn set_wwdgsmen(&mut self, val: super::vals::Lptimsmen) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); + #[doc = "Transfer error interrupt enable"] + pub const fn teie(&self) -> bool { + let val = (self.0 >> 3usize) & 0x01; + val != 0 } - #[doc = "SPI2 clock enable during sleep mode bit"] - pub const fn spi2smen(&self) -> super::vals::Lptimsmen { - let val = (self.0 >> 14usize) & 0x01; - super::vals::Lptimsmen(val as u8) + #[doc = "Transfer error interrupt enable"] + pub fn set_teie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); } - #[doc = "SPI2 clock enable during sleep mode bit"] - pub fn set_spi2smen(&mut self, val: super::vals::Lptimsmen) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); + #[doc = "Data transfer direction"] + pub const fn dir(&self) -> super::vals::Dir { + let val = (self.0 >> 4usize) & 0x01; + super::vals::Dir(val as u8) } - #[doc = "UART2 clock enable during sleep mode bit"] - pub const fn usart2smen(&self) -> super::vals::Lptimsmen { - let val = (self.0 >> 17usize) & 0x01; - super::vals::Lptimsmen(val as u8) + #[doc = "Data transfer direction"] + pub fn set_dir(&mut self, val: super::vals::Dir) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); } - #[doc = "UART2 clock enable during sleep mode bit"] - pub fn set_usart2smen(&mut self, val: super::vals::Lptimsmen) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); + #[doc = "Circular mode"] + pub const fn circ(&self) -> super::vals::Circ { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Circ(val as u8) } - #[doc = "LPUART1 clock enable during sleep mode bit"] - pub const fn lpuart1smen(&self) -> super::vals::Lptimsmen { - let val = (self.0 >> 18usize) & 0x01; - super::vals::Lptimsmen(val as u8) + #[doc = "Circular mode"] + pub fn set_circ(&mut self, val: super::vals::Circ) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "LPUART1 clock enable during sleep mode bit"] - pub fn set_lpuart1smen(&mut self, val: super::vals::Lptimsmen) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); + #[doc = "Peripheral increment mode"] + pub const fn pinc(&self) -> super::vals::Inc { + let val = (self.0 >> 6usize) & 0x01; + super::vals::Inc(val as u8) } - #[doc = "USART4 clock enable during Sleep mode bit"] - pub const fn usart4smen(&self) -> super::vals::Lptimsmen { - let val = (self.0 >> 19usize) & 0x01; - super::vals::Lptimsmen(val as u8) + #[doc = "Peripheral increment mode"] + pub fn set_pinc(&mut self, val: super::vals::Inc) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); } - #[doc = "USART4 clock enable during Sleep mode bit"] - pub fn set_usart4smen(&mut self, val: super::vals::Lptimsmen) { - self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); + #[doc = "Memory increment mode"] + pub const fn minc(&self) -> super::vals::Inc { + let val = (self.0 >> 7usize) & 0x01; + super::vals::Inc(val as u8) } - #[doc = "USART5 clock enable during Sleep mode bit"] - pub const fn usart5smen(&self) -> super::vals::Lptimsmen { - let val = (self.0 >> 20usize) & 0x01; - super::vals::Lptimsmen(val as u8) + #[doc = "Memory increment mode"] + pub fn set_minc(&mut self, val: super::vals::Inc) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); } - #[doc = "USART5 clock enable during Sleep mode bit"] - pub fn set_usart5smen(&mut self, val: super::vals::Lptimsmen) { - self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize); + #[doc = "Peripheral size"] + pub const fn psize(&self) -> super::vals::Size { + let val = (self.0 >> 8usize) & 0x03; + super::vals::Size(val as u8) } - #[doc = "I2C1 clock enable during sleep mode bit"] - pub const fn i2c1smen(&self) -> super::vals::Lptimsmen { - let val = (self.0 >> 21usize) & 0x01; - super::vals::Lptimsmen(val as u8) + #[doc = "Peripheral size"] + pub fn set_psize(&mut self, val: super::vals::Size) { + self.0 = (self.0 & !(0x03 << 8usize)) | (((val.0 as u32) & 0x03) << 8usize); } - #[doc = "I2C1 clock enable during sleep mode bit"] - pub fn set_i2c1smen(&mut self, val: super::vals::Lptimsmen) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); + #[doc = "Memory size"] + pub const fn msize(&self) -> super::vals::Size { + let val = (self.0 >> 10usize) & 0x03; + super::vals::Size(val as u8) } - #[doc = "I2C2 clock enable during sleep mode bit"] - pub const fn i2c2smen(&self) -> super::vals::Lptimsmen { - let val = (self.0 >> 22usize) & 0x01; - super::vals::Lptimsmen(val as u8) + #[doc = "Memory size"] + pub fn set_msize(&mut self, val: super::vals::Size) { + self.0 = (self.0 & !(0x03 << 10usize)) | (((val.0 as u32) & 0x03) << 10usize); } - #[doc = "I2C2 clock enable during sleep mode bit"] - pub fn set_i2c2smen(&mut self, val: super::vals::Lptimsmen) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); + #[doc = "Channel Priority level"] + pub const fn pl(&self) -> super::vals::Pl { + let val = (self.0 >> 12usize) & 0x03; + super::vals::Pl(val as u8) } - #[doc = "USB clock enable during sleep mode bit"] - pub const fn usbsmen(&self) -> super::vals::Lptimsmen { - let val = (self.0 >> 23usize) & 0x01; - super::vals::Lptimsmen(val as u8) + #[doc = "Channel Priority level"] + pub fn set_pl(&mut self, val: super::vals::Pl) { + self.0 = (self.0 & !(0x03 << 12usize)) | (((val.0 as u32) & 0x03) << 12usize); } - #[doc = "USB clock enable during sleep mode bit"] - pub fn set_usbsmen(&mut self, val: super::vals::Lptimsmen) { - self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize); + #[doc = "Memory to memory mode"] + pub const fn mem2mem(&self) -> super::vals::Memmem { + let val = (self.0 >> 14usize) & 0x01; + super::vals::Memmem(val as u8) } - #[doc = "Clock recovery system clock enable during sleep mode bit"] - pub const fn crssmen(&self) -> super::vals::Lptimsmen { - let val = (self.0 >> 27usize) & 0x01; - super::vals::Lptimsmen(val as u8) + #[doc = "Memory to memory mode"] + pub fn set_mem2mem(&mut self, val: super::vals::Memmem) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); } - #[doc = "Clock recovery system clock enable during sleep mode bit"] - pub fn set_crssmen(&mut self, val: super::vals::Lptimsmen) { - self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize); + } + impl Default for Cr { + fn default() -> Cr { + Cr(0) } - #[doc = "Power interface clock enable during sleep mode bit"] - pub const fn pwrsmen(&self) -> super::vals::Lptimsmen { - let val = (self.0 >> 28usize) & 0x01; - super::vals::Lptimsmen(val as u8) + } + #[doc = "DMA interrupt flag clear register (DMA_IFCR)"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ifcr(pub u32); + impl Ifcr { + #[doc = "Channel 1 Global interrupt clear"] + pub fn cgif(&self, n: usize) -> bool { + assert!(n < 7usize); + let offs = 0usize + n * 4usize; + let val = (self.0 >> offs) & 0x01; + val != 0 } - #[doc = "Power interface clock enable during sleep mode bit"] - pub fn set_pwrsmen(&mut self, val: super::vals::Lptimsmen) { - self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); + #[doc = "Channel 1 Global interrupt clear"] + pub fn set_cgif(&mut self, n: usize, val: bool) { + assert!(n < 7usize); + let offs = 0usize + n * 4usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "DAC interface clock enable during sleep mode bit"] - pub const fn dacsmen(&self) -> super::vals::Lptimsmen { - let val = (self.0 >> 29usize) & 0x01; - super::vals::Lptimsmen(val as u8) + #[doc = "Channel 1 Transfer Complete clear"] + pub fn ctcif(&self, n: usize) -> bool { + assert!(n < 7usize); + let offs = 1usize + n * 4usize; + let val = (self.0 >> offs) & 0x01; + val != 0 } - #[doc = "DAC interface clock enable during sleep mode bit"] - pub fn set_dacsmen(&mut self, val: super::vals::Lptimsmen) { - self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); + #[doc = "Channel 1 Transfer Complete clear"] + pub fn set_ctcif(&mut self, n: usize, val: bool) { + assert!(n < 7usize); + let offs = 1usize + n * 4usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "2C3 clock enable during Sleep mode bit"] - pub const fn i2c3smen(&self) -> super::vals::Lptimsmen { - let val = (self.0 >> 30usize) & 0x01; - super::vals::Lptimsmen(val as u8) + #[doc = "Channel 1 Half Transfer clear"] + pub fn chtif(&self, n: usize) -> bool { + assert!(n < 7usize); + let offs = 2usize + n * 4usize; + let val = (self.0 >> offs) & 0x01; + val != 0 } - #[doc = "2C3 clock enable during Sleep mode bit"] - pub fn set_i2c3smen(&mut self, val: super::vals::Lptimsmen) { - self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize); + #[doc = "Channel 1 Half Transfer clear"] + pub fn set_chtif(&mut self, n: usize, val: bool) { + assert!(n < 7usize); + let offs = 2usize + n * 4usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "Low power timer clock enable during sleep mode bit"] - pub const fn lptim1smen(&self) -> super::vals::Lptimsmen { - let val = (self.0 >> 31usize) & 0x01; - super::vals::Lptimsmen(val as u8) + #[doc = "Channel 1 Transfer Error clear"] + pub fn cteif(&self, n: usize) -> bool { + assert!(n < 7usize); + let offs = 3usize + n * 4usize; + let val = (self.0 >> offs) & 0x01; + val != 0 } - #[doc = "Low power timer clock enable during sleep mode bit"] - pub fn set_lptim1smen(&mut self, val: super::vals::Lptimsmen) { - self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); + #[doc = "Channel 1 Transfer Error clear"] + pub fn set_cteif(&mut self, n: usize, val: bool) { + assert!(n < 7usize); + let offs = 3usize + n * 4usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + } + } + impl Default for Ifcr { + fn default() -> Ifcr { + Ifcr(0) } } - impl Default for Apb1smenr { - fn default() -> Apb1smenr { - Apb1smenr(0) - } + } +} +pub mod dma_v2 { + use crate::generic::*; + #[doc = "DMA controller"] + #[derive(Copy, Clone)] + pub struct Dma(pub *mut u8); + unsafe impl Send for Dma {} + unsafe impl Sync for Dma {} + impl Dma { + #[doc = "low interrupt status register"] + pub fn isr(self, n: usize) -> Reg { + assert!(n < 2usize); + unsafe { Reg::from_ptr(self.0.add(0usize + n * 4usize)) } + } + #[doc = "low interrupt flag clear register"] + pub fn ifcr(self, n: usize) -> Reg { + assert!(n < 2usize); + unsafe { Reg::from_ptr(self.0.add(8usize + n * 4usize)) } + } + #[doc = "Stream cluster: S?CR, S?NDTR, S?M0AR, S?M1AR and S?FCR registers"] + pub fn st(self, n: usize) -> St { + assert!(n < 8usize); + unsafe { St(self.0.add(16usize + n * 24usize)) } + } + } + #[doc = "Stream cluster: S?CR, S?NDTR, S?M0AR, S?M1AR and S?FCR registers"] + #[derive(Copy, Clone)] + pub struct St(pub *mut u8); + unsafe impl Send for St {} + unsafe impl Sync for St {} + impl St { + #[doc = "stream x configuration register"] + pub fn cr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(0usize)) } + } + #[doc = "stream x number of data register"] + pub fn ndtr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(4usize)) } + } + #[doc = "stream x peripheral address register"] + pub fn par(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(8usize)) } + } + #[doc = "stream x memory 0 address register"] + pub fn m0ar(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(12usize)) } + } + #[doc = "stream x memory 1 address register"] + pub fn m1ar(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(16usize)) } + } + #[doc = "stream x FIFO control register"] + pub fn fcr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(20usize)) } + } + } + pub mod vals { + use crate::generic::*; + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Pfctrl(pub u8); + impl Pfctrl { + #[doc = "The DMA is the flow controller"] + pub const DMA: Self = Self(0); + #[doc = "The peripheral is the flow controller"] + pub const PERIPHERAL: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Dmdis(pub u8); + impl Dmdis { + #[doc = "Direct mode is enabled"] + pub const ENABLED: Self = Self(0); + #[doc = "Direct mode is disabled"] + pub const DISABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Circ(pub u8); + impl Circ { + #[doc = "Circular mode disabled"] + pub const DISABLED: Self = Self(0); + #[doc = "Circular mode enabled"] + pub const ENABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Dbm(pub u8); + impl Dbm { + #[doc = "No buffer switching at the end of transfer"] + pub const DISABLED: Self = Self(0); + #[doc = "Memory target switched at the end of the DMA transfer"] + pub const ENABLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Fs(pub u8); + impl Fs { + #[doc = "0 < fifo_level < 1/4"] + pub const QUARTER1: Self = Self(0); + #[doc = "1/4 <= fifo_level < 1/2"] + pub const QUARTER2: Self = Self(0x01); + #[doc = "1/2 <= fifo_level < 3/4"] + pub const QUARTER3: Self = Self(0x02); + #[doc = "3/4 <= fifo_level < full"] + pub const QUARTER4: Self = Self(0x03); + #[doc = "FIFO is empty"] + pub const EMPTY: Self = Self(0x04); + #[doc = "FIFO is full"] + pub const FULL: Self = Self(0x05); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Ct(pub u8); + impl Ct { + #[doc = "The current target memory is Memory 0"] + pub const MEMORY0: Self = Self(0); + #[doc = "The current target memory is Memory 1"] + pub const MEMORY1: Self = Self(0x01); } - #[doc = "APB1 peripheral reset register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Fth(pub u8); + impl Fth { + #[doc = "1/4 full FIFO"] + pub const QUARTER: Self = Self(0); + #[doc = "1/2 full FIFO"] + pub const HALF: Self = Self(0x01); + #[doc = "3/4 full FIFO"] + pub const THREEQUARTERS: Self = Self(0x02); + #[doc = "Full FIFO"] + pub const FULL: Self = Self(0x03); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Pl(pub u8); + impl Pl { + #[doc = "Low"] + pub const LOW: Self = Self(0); + #[doc = "Medium"] + pub const MEDIUM: Self = Self(0x01); + #[doc = "High"] + pub const HIGH: Self = Self(0x02); + #[doc = "Very high"] + pub const VERYHIGH: Self = Self(0x03); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Dir(pub u8); + impl Dir { + #[doc = "Peripheral-to-memory"] + pub const PERIPHERALTOMEMORY: Self = Self(0); + #[doc = "Memory-to-peripheral"] + pub const MEMORYTOPERIPHERAL: Self = Self(0x01); + #[doc = "Memory-to-memory"] + pub const MEMORYTOMEMORY: Self = Self(0x02); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Burst(pub u8); + impl Burst { + #[doc = "Single transfer"] + pub const SINGLE: Self = Self(0); + #[doc = "Incremental burst of 4 beats"] + pub const INCR4: Self = Self(0x01); + #[doc = "Incremental burst of 8 beats"] + pub const INCR8: Self = Self(0x02); + #[doc = "Incremental burst of 16 beats"] + pub const INCR16: Self = Self(0x03); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Size(pub u8); + impl Size { + #[doc = "Byte (8-bit)"] + pub const BITS8: Self = Self(0); + #[doc = "Half-word (16-bit)"] + pub const BITS16: Self = Self(0x01); + #[doc = "Word (32-bit)"] + pub const BITS32: Self = Self(0x02); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Inc(pub u8); + impl Inc { + #[doc = "Address pointer is fixed"] + pub const FIXED: Self = Self(0); + #[doc = "Address pointer is incremented after each data transfer"] + pub const INCREMENTED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Pincos(pub u8); + impl Pincos { + #[doc = "The offset size for the peripheral address calculation is linked to the PSIZE"] + pub const PSIZE: Self = Self(0); + #[doc = "The offset size for the peripheral address calculation is fixed to 4 (32-bit alignment)"] + pub const FIXED4: Self = Self(0x01); + } + } + pub mod regs { + use crate::generic::*; + #[doc = "stream x configuration register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Apb1rstr(pub u32); - impl Apb1rstr { - #[doc = "Timer2 reset"] - pub const fn tim2rst(&self) -> bool { + pub struct Cr(pub u32); + impl Cr { + #[doc = "Stream enable / flag stream ready when read low"] + pub const fn en(&self) -> bool { let val = (self.0 >> 0usize) & 0x01; val != 0 } - #[doc = "Timer2 reset"] - pub fn set_tim2rst(&mut self, val: bool) { + #[doc = "Stream enable / flag stream ready when read low"] + pub fn set_en(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "Timer3 reset"] - pub const fn tim3rst(&self) -> bool { + #[doc = "Direct mode error interrupt enable"] + pub const fn dmeie(&self) -> bool { let val = (self.0 >> 1usize) & 0x01; val != 0 } - #[doc = "Timer3 reset"] - pub fn set_tim3rst(&mut self, val: bool) { + #[doc = "Direct mode error interrupt enable"] + pub fn set_dmeie(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - #[doc = "Timer 6 reset"] - pub const fn tim6rst(&self) -> bool { - let val = (self.0 >> 4usize) & 0x01; + #[doc = "Transfer error interrupt enable"] + pub const fn teie(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; val != 0 } - #[doc = "Timer 6 reset"] - pub fn set_tim6rst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); + #[doc = "Transfer error interrupt enable"] + pub fn set_teie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); } - #[doc = "Timer 7 reset"] - pub const fn tim7rst(&self) -> bool { - let val = (self.0 >> 5usize) & 0x01; + #[doc = "Half transfer interrupt enable"] + pub const fn htie(&self) -> bool { + let val = (self.0 >> 3usize) & 0x01; val != 0 } - #[doc = "Timer 7 reset"] - pub fn set_tim7rst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); + #[doc = "Half transfer interrupt enable"] + pub fn set_htie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); } - #[doc = "Window watchdog reset"] - pub const fn wwdrst(&self) -> bool { - let val = (self.0 >> 11usize) & 0x01; + #[doc = "Transfer complete interrupt enable"] + pub const fn tcie(&self) -> bool { + let val = (self.0 >> 4usize) & 0x01; val != 0 } - #[doc = "Window watchdog reset"] - pub fn set_wwdrst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); + #[doc = "Transfer complete interrupt enable"] + pub fn set_tcie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); } - #[doc = "SPI2 reset"] - pub const fn spi2rst(&self) -> bool { - let val = (self.0 >> 14usize) & 0x01; - val != 0 + #[doc = "Peripheral flow controller"] + pub const fn pfctrl(&self) -> super::vals::Pfctrl { + let val = (self.0 >> 5usize) & 0x01; + super::vals::Pfctrl(val as u8) } - #[doc = "SPI2 reset"] - pub fn set_spi2rst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); + #[doc = "Peripheral flow controller"] + pub fn set_pfctrl(&mut self, val: super::vals::Pfctrl) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); } - #[doc = "UART2 reset"] - pub const fn lpuart12rst(&self) -> bool { - let val = (self.0 >> 17usize) & 0x01; - val != 0 + #[doc = "Data transfer direction"] + pub const fn dir(&self) -> super::vals::Dir { + let val = (self.0 >> 6usize) & 0x03; + super::vals::Dir(val as u8) } - #[doc = "UART2 reset"] - pub fn set_lpuart12rst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); + #[doc = "Data transfer direction"] + pub fn set_dir(&mut self, val: super::vals::Dir) { + self.0 = (self.0 & !(0x03 << 6usize)) | (((val.0 as u32) & 0x03) << 6usize); } - #[doc = "LPUART1 reset"] - pub const fn lpuart1rst(&self) -> bool { - let val = (self.0 >> 18usize) & 0x01; - val != 0 + #[doc = "Circular mode"] + pub const fn circ(&self) -> super::vals::Circ { + let val = (self.0 >> 8usize) & 0x01; + super::vals::Circ(val as u8) } - #[doc = "LPUART1 reset"] - pub fn set_lpuart1rst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize); + #[doc = "Circular mode"] + pub fn set_circ(&mut self, val: super::vals::Circ) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); } - #[doc = "USART4 reset"] - pub const fn usart4rst(&self) -> bool { - let val = (self.0 >> 19usize) & 0x01; - val != 0 + #[doc = "Peripheral increment mode"] + pub const fn pinc(&self) -> super::vals::Inc { + let val = (self.0 >> 9usize) & 0x01; + super::vals::Inc(val as u8) } - #[doc = "USART4 reset"] - pub fn set_usart4rst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize); + #[doc = "Peripheral increment mode"] + pub fn set_pinc(&mut self, val: super::vals::Inc) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); } - #[doc = "USART5 reset"] - pub const fn usart5rst(&self) -> bool { - let val = (self.0 >> 20usize) & 0x01; - val != 0 + #[doc = "Memory increment mode"] + pub const fn minc(&self) -> super::vals::Inc { + let val = (self.0 >> 10usize) & 0x01; + super::vals::Inc(val as u8) } - #[doc = "USART5 reset"] - pub fn set_usart5rst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize); + #[doc = "Memory increment mode"] + pub fn set_minc(&mut self, val: super::vals::Inc) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); } - #[doc = "I2C1 reset"] - pub const fn i2c1rst(&self) -> bool { - let val = (self.0 >> 21usize) & 0x01; - val != 0 + #[doc = "Peripheral data size"] + pub const fn psize(&self) -> super::vals::Size { + let val = (self.0 >> 11usize) & 0x03; + super::vals::Size(val as u8) } - #[doc = "I2C1 reset"] - pub fn set_i2c1rst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); + #[doc = "Peripheral data size"] + pub fn set_psize(&mut self, val: super::vals::Size) { + self.0 = (self.0 & !(0x03 << 11usize)) | (((val.0 as u32) & 0x03) << 11usize); } - #[doc = "I2C2 reset"] - pub const fn i2c2rst(&self) -> bool { - let val = (self.0 >> 22usize) & 0x01; - val != 0 + #[doc = "Memory data size"] + pub const fn msize(&self) -> super::vals::Size { + let val = (self.0 >> 13usize) & 0x03; + super::vals::Size(val as u8) + } + #[doc = "Memory data size"] + pub fn set_msize(&mut self, val: super::vals::Size) { + self.0 = (self.0 & !(0x03 << 13usize)) | (((val.0 as u32) & 0x03) << 13usize); } - #[doc = "I2C2 reset"] - pub fn set_i2c2rst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); + #[doc = "Peripheral increment offset size"] + pub const fn pincos(&self) -> super::vals::Pincos { + let val = (self.0 >> 15usize) & 0x01; + super::vals::Pincos(val as u8) } - #[doc = "USB reset"] - pub const fn usbrst(&self) -> bool { - let val = (self.0 >> 23usize) & 0x01; - val != 0 + #[doc = "Peripheral increment offset size"] + pub fn set_pincos(&mut self, val: super::vals::Pincos) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); } - #[doc = "USB reset"] - pub fn set_usbrst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize); + #[doc = "Priority level"] + pub const fn pl(&self) -> super::vals::Pl { + let val = (self.0 >> 16usize) & 0x03; + super::vals::Pl(val as u8) } - #[doc = "Clock recovery system reset"] - pub const fn crsrst(&self) -> bool { - let val = (self.0 >> 27usize) & 0x01; - val != 0 + #[doc = "Priority level"] + pub fn set_pl(&mut self, val: super::vals::Pl) { + self.0 = (self.0 & !(0x03 << 16usize)) | (((val.0 as u32) & 0x03) << 16usize); } - #[doc = "Clock recovery system reset"] - pub fn set_crsrst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize); + #[doc = "Double buffer mode"] + pub const fn dbm(&self) -> super::vals::Dbm { + let val = (self.0 >> 18usize) & 0x01; + super::vals::Dbm(val as u8) } - #[doc = "Power interface reset"] - pub const fn pwrrst(&self) -> bool { - let val = (self.0 >> 28usize) & 0x01; - val != 0 + #[doc = "Double buffer mode"] + pub fn set_dbm(&mut self, val: super::vals::Dbm) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); } - #[doc = "Power interface reset"] - pub fn set_pwrrst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize); + #[doc = "Current target (only in double buffer mode)"] + pub const fn ct(&self) -> super::vals::Ct { + let val = (self.0 >> 19usize) & 0x01; + super::vals::Ct(val as u8) } - #[doc = "DAC interface reset"] - pub const fn dacrst(&self) -> bool { - let val = (self.0 >> 29usize) & 0x01; - val != 0 + #[doc = "Current target (only in double buffer mode)"] + pub fn set_ct(&mut self, val: super::vals::Ct) { + self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); } - #[doc = "DAC interface reset"] - pub fn set_dacrst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 29usize)) | (((val as u32) & 0x01) << 29usize); + #[doc = "Peripheral burst transfer configuration"] + pub const fn pburst(&self) -> super::vals::Burst { + let val = (self.0 >> 21usize) & 0x03; + super::vals::Burst(val as u8) } - #[doc = "I2C3 reset"] - pub const fn i2c3rst(&self) -> bool { - let val = (self.0 >> 30usize) & 0x01; - val != 0 + #[doc = "Peripheral burst transfer configuration"] + pub fn set_pburst(&mut self, val: super::vals::Burst) { + self.0 = (self.0 & !(0x03 << 21usize)) | (((val.0 as u32) & 0x03) << 21usize); } - #[doc = "I2C3 reset"] - pub fn set_i2c3rst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 30usize)) | (((val as u32) & 0x01) << 30usize); + #[doc = "Memory burst transfer configuration"] + pub const fn mburst(&self) -> super::vals::Burst { + let val = (self.0 >> 23usize) & 0x03; + super::vals::Burst(val as u8) } - #[doc = "Low power timer reset"] - pub const fn lptim1rst(&self) -> bool { - let val = (self.0 >> 31usize) & 0x01; - val != 0 + #[doc = "Memory burst transfer configuration"] + pub fn set_mburst(&mut self, val: super::vals::Burst) { + self.0 = (self.0 & !(0x03 << 23usize)) | (((val.0 as u32) & 0x03) << 23usize); } - #[doc = "Low power timer reset"] - pub fn set_lptim1rst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize); + #[doc = "Channel selection"] + pub const fn chsel(&self) -> u8 { + let val = (self.0 >> 25usize) & 0x0f; + val as u8 + } + #[doc = "Channel selection"] + pub fn set_chsel(&mut self, val: u8) { + self.0 = (self.0 & !(0x0f << 25usize)) | (((val as u32) & 0x0f) << 25usize); } } - impl Default for Apb1rstr { - fn default() -> Apb1rstr { - Apb1rstr(0) + impl Default for Cr { + fn default() -> Cr { + Cr(0) } } - #[doc = "Clock interrupt enable register"] + #[doc = "stream x number of data register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cier(pub u32); - impl Cier { - #[doc = "LSI ready interrupt flag"] - pub const fn lsirdyie(&self) -> super::vals::Hsirdyie { - let val = (self.0 >> 0usize) & 0x01; - super::vals::Hsirdyie(val as u8) + pub struct Ndtr(pub u32); + impl Ndtr { + #[doc = "Number of data items to transfer"] + pub const fn ndt(&self) -> u16 { + let val = (self.0 >> 0usize) & 0xffff; + val as u16 } - #[doc = "LSI ready interrupt flag"] - pub fn set_lsirdyie(&mut self, val: super::vals::Hsirdyie) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + #[doc = "Number of data items to transfer"] + pub fn set_ndt(&mut self, val: u16) { + self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); } - #[doc = "LSE ready interrupt flag"] - pub const fn lserdyie(&self) -> super::vals::Hsirdyie { - let val = (self.0 >> 1usize) & 0x01; - super::vals::Hsirdyie(val as u8) + } + impl Default for Ndtr { + fn default() -> Ndtr { + Ndtr(0) } - #[doc = "LSE ready interrupt flag"] - pub fn set_lserdyie(&mut self, val: super::vals::Hsirdyie) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + } + #[doc = "stream x FIFO control register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Fcr(pub u32); + impl Fcr { + #[doc = "FIFO threshold selection"] + pub const fn fth(&self) -> super::vals::Fth { + let val = (self.0 >> 0usize) & 0x03; + super::vals::Fth(val as u8) } - #[doc = "HSI16 ready interrupt flag"] - pub const fn hsi16rdyie(&self) -> super::vals::Hsirdyie { + #[doc = "FIFO threshold selection"] + pub fn set_fth(&mut self, val: super::vals::Fth) { + self.0 = (self.0 & !(0x03 << 0usize)) | (((val.0 as u32) & 0x03) << 0usize); + } + #[doc = "Direct mode disable"] + pub const fn dmdis(&self) -> super::vals::Dmdis { let val = (self.0 >> 2usize) & 0x01; - super::vals::Hsirdyie(val as u8) + super::vals::Dmdis(val as u8) } - #[doc = "HSI16 ready interrupt flag"] - pub fn set_hsi16rdyie(&mut self, val: super::vals::Hsirdyie) { + #[doc = "Direct mode disable"] + pub fn set_dmdis(&mut self, val: super::vals::Dmdis) { self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); } - #[doc = "HSE ready interrupt flag"] - pub const fn hserdyie(&self) -> super::vals::Hsirdyie { - let val = (self.0 >> 3usize) & 0x01; - super::vals::Hsirdyie(val as u8) + #[doc = "FIFO status"] + pub const fn fs(&self) -> super::vals::Fs { + let val = (self.0 >> 3usize) & 0x07; + super::vals::Fs(val as u8) } - #[doc = "HSE ready interrupt flag"] - pub fn set_hserdyie(&mut self, val: super::vals::Hsirdyie) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); + #[doc = "FIFO status"] + pub fn set_fs(&mut self, val: super::vals::Fs) { + self.0 = (self.0 & !(0x07 << 3usize)) | (((val.0 as u32) & 0x07) << 3usize); } - #[doc = "PLL ready interrupt flag"] - pub const fn pllrdyie(&self) -> super::vals::Hsirdyie { - let val = (self.0 >> 4usize) & 0x01; - super::vals::Hsirdyie(val as u8) + #[doc = "FIFO error interrupt enable"] + pub const fn feie(&self) -> bool { + let val = (self.0 >> 7usize) & 0x01; + val != 0 } - #[doc = "PLL ready interrupt flag"] - pub fn set_pllrdyie(&mut self, val: super::vals::Hsirdyie) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + #[doc = "FIFO error interrupt enable"] + pub fn set_feie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); } - #[doc = "MSI ready interrupt flag"] - pub const fn msirdyie(&self) -> super::vals::Hsirdyie { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Hsirdyie(val as u8) + } + impl Default for Fcr { + fn default() -> Fcr { + Fcr(0) } - #[doc = "MSI ready interrupt flag"] - pub fn set_msirdyie(&mut self, val: super::vals::Hsirdyie) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + } + #[doc = "interrupt register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ixr(pub u32); + impl Ixr { + #[doc = "Stream x FIFO error interrupt flag (x=3..0)"] + pub fn feif(&self, n: usize) -> bool { + assert!(n < 4usize); + let offs = 0usize + ([0usize, 6usize, 16usize, 22usize][n] as usize); + let val = (self.0 >> offs) & 0x01; + val != 0 } - #[doc = "HSI48 ready interrupt flag"] - pub const fn hsi48rdyie(&self) -> super::vals::Hsirdyie { - let val = (self.0 >> 6usize) & 0x01; - super::vals::Hsirdyie(val as u8) + #[doc = "Stream x FIFO error interrupt flag (x=3..0)"] + pub fn set_feif(&mut self, n: usize, val: bool) { + assert!(n < 4usize); + let offs = 0usize + ([0usize, 6usize, 16usize, 22usize][n] as usize); + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "HSI48 ready interrupt flag"] - pub fn set_hsi48rdyie(&mut self, val: super::vals::Hsirdyie) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize); + #[doc = "Stream x direct mode error interrupt flag (x=3..0)"] + pub fn dmeif(&self, n: usize) -> bool { + assert!(n < 4usize); + let offs = 2usize + ([0usize, 6usize, 16usize, 22usize][n] as usize); + let val = (self.0 >> offs) & 0x01; + val != 0 + } + #[doc = "Stream x direct mode error interrupt flag (x=3..0)"] + pub fn set_dmeif(&mut self, n: usize, val: bool) { + assert!(n < 4usize); + let offs = 2usize + ([0usize, 6usize, 16usize, 22usize][n] as usize); + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + } + #[doc = "Stream x transfer error interrupt flag (x=3..0)"] + pub fn teif(&self, n: usize) -> bool { + assert!(n < 4usize); + let offs = 3usize + ([0usize, 6usize, 16usize, 22usize][n] as usize); + let val = (self.0 >> offs) & 0x01; + val != 0 + } + #[doc = "Stream x transfer error interrupt flag (x=3..0)"] + pub fn set_teif(&mut self, n: usize, val: bool) { + assert!(n < 4usize); + let offs = 3usize + ([0usize, 6usize, 16usize, 22usize][n] as usize); + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + } + #[doc = "Stream x half transfer interrupt flag (x=3..0)"] + pub fn htif(&self, n: usize) -> bool { + assert!(n < 4usize); + let offs = 4usize + ([0usize, 6usize, 16usize, 22usize][n] as usize); + let val = (self.0 >> offs) & 0x01; + val != 0 + } + #[doc = "Stream x half transfer interrupt flag (x=3..0)"] + pub fn set_htif(&mut self, n: usize, val: bool) { + assert!(n < 4usize); + let offs = 4usize + ([0usize, 6usize, 16usize, 22usize][n] as usize); + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "LSE CSS interrupt flag"] - pub const fn csslse(&self) -> super::vals::Csslse { - let val = (self.0 >> 7usize) & 0x01; - super::vals::Csslse(val as u8) + #[doc = "Stream x transfer complete interrupt flag (x = 3..0)"] + pub fn tcif(&self, n: usize) -> bool { + assert!(n < 4usize); + let offs = 5usize + ([0usize, 6usize, 16usize, 22usize][n] as usize); + let val = (self.0 >> offs) & 0x01; + val != 0 } - #[doc = "LSE CSS interrupt flag"] - pub fn set_csslse(&mut self, val: super::vals::Csslse) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); + #[doc = "Stream x transfer complete interrupt flag (x = 3..0)"] + pub fn set_tcif(&mut self, n: usize, val: bool) { + assert!(n < 4usize); + let offs = 5usize + ([0usize, 6usize, 16usize, 22usize][n] as usize); + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } } - impl Default for Cier { - fn default() -> Cier { - Cier(0) + impl Default for Ixr { + fn default() -> Ixr { + Ixr(0) } } - #[doc = "APB2 peripheral reset register"] + } +} +pub mod dbgmcu_h7 { + use crate::generic::*; + #[doc = "Debug support"] + #[derive(Copy, Clone)] + pub struct Dbgmcu(pub *mut u8); + unsafe impl Send for Dbgmcu {} + unsafe impl Sync for Dbgmcu {} + impl Dbgmcu { + #[doc = "Identity code"] + pub fn idc(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(0usize)) } + } + #[doc = "Configuration register"] + pub fn cr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(4usize)) } + } + #[doc = "APB3 peripheral freeze register"] + pub fn apb3fz1(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(52usize)) } + } + #[doc = "APB1L peripheral freeze register"] + pub fn apb1lfz1(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(60usize)) } + } + #[doc = "APB2 peripheral freeze register"] + pub fn apb2fz1(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(76usize)) } + } + #[doc = "APB4 peripheral freeze register"] + pub fn apb4fz1(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(84usize)) } + } + } + pub mod regs { + use crate::generic::*; + #[doc = "APB2 peripheral freeze register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Apb2rstr(pub u32); - impl Apb2rstr { - #[doc = "System configuration controller reset"] - pub const fn syscfgrst(&self) -> bool { + pub struct Apb2fz1(pub u32); + impl Apb2fz1 { + #[doc = "TIM1 stop in debug mode"] + pub const fn tim1(&self) -> bool { let val = (self.0 >> 0usize) & 0x01; val != 0 } - #[doc = "System configuration controller reset"] - pub fn set_syscfgrst(&mut self, val: bool) { + #[doc = "TIM1 stop in debug mode"] + pub fn set_tim1(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "TIM21 timer reset"] - pub const fn tim21rst(&self) -> bool { - let val = (self.0 >> 2usize) & 0x01; - val != 0 - } - #[doc = "TIM21 timer reset"] - pub fn set_tim21rst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); - } - #[doc = "TIM22 timer reset"] - pub const fn tim22rst(&self) -> bool { - let val = (self.0 >> 5usize) & 0x01; + #[doc = "TIM8 stop in debug mode"] + pub const fn tim8(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; val != 0 } - #[doc = "TIM22 timer reset"] - pub fn set_tim22rst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); + #[doc = "TIM8 stop in debug mode"] + pub fn set_tim8(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - #[doc = "ADC interface reset"] - pub const fn adcrst(&self) -> bool { - let val = (self.0 >> 9usize) & 0x01; + #[doc = "TIM15 stop in debug mode"] + pub const fn tim15(&self) -> bool { + let val = (self.0 >> 16usize) & 0x01; val != 0 } - #[doc = "ADC interface reset"] - pub fn set_adcrst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + #[doc = "TIM15 stop in debug mode"] + pub fn set_tim15(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); } - #[doc = "SPI 1 reset"] - pub const fn spi1rst(&self) -> bool { - let val = (self.0 >> 12usize) & 0x01; + #[doc = "TIM16 stop in debug mode"] + pub const fn tim16(&self) -> bool { + let val = (self.0 >> 17usize) & 0x01; val != 0 } - #[doc = "SPI 1 reset"] - pub fn set_spi1rst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); + #[doc = "TIM16 stop in debug mode"] + pub fn set_tim16(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); } - #[doc = "USART1 reset"] - pub const fn usart1rst(&self) -> bool { - let val = (self.0 >> 14usize) & 0x01; + #[doc = "TIM17 stop in debug mode"] + pub const fn tim17(&self) -> bool { + let val = (self.0 >> 18usize) & 0x01; val != 0 } - #[doc = "USART1 reset"] - pub fn set_usart1rst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); + #[doc = "TIM17 stop in debug mode"] + pub fn set_tim17(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize); } - #[doc = "DBG reset"] - pub const fn dbgrst(&self) -> bool { - let val = (self.0 >> 22usize) & 0x01; + #[doc = "HRTIM stop in debug mode"] + pub const fn hrtim(&self) -> bool { + let val = (self.0 >> 29usize) & 0x01; val != 0 } - #[doc = "DBG reset"] - pub fn set_dbgrst(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); + #[doc = "HRTIM stop in debug mode"] + pub fn set_hrtim(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 29usize)) | (((val as u32) & 0x01) << 29usize); } } - impl Default for Apb2rstr { - fn default() -> Apb2rstr { - Apb2rstr(0) + impl Default for Apb2fz1 { + fn default() -> Apb2fz1 { + Apb2fz1(0) } } - #[doc = "Clock configuration register"] + #[doc = "Identity code"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cfgr(pub u32); - impl Cfgr { - #[doc = "System clock switch"] - pub const fn sw(&self) -> super::vals::Sw { - let val = (self.0 >> 0usize) & 0x03; - super::vals::Sw(val as u8) - } - #[doc = "System clock switch"] - pub fn set_sw(&mut self, val: super::vals::Sw) { - self.0 = (self.0 & !(0x03 << 0usize)) | (((val.0 as u32) & 0x03) << 0usize); - } - #[doc = "System clock switch status"] - pub const fn sws(&self) -> super::vals::Sws { - let val = (self.0 >> 2usize) & 0x03; - super::vals::Sws(val as u8) - } - #[doc = "System clock switch status"] - pub fn set_sws(&mut self, val: super::vals::Sws) { - self.0 = (self.0 & !(0x03 << 2usize)) | (((val.0 as u32) & 0x03) << 2usize); - } - #[doc = "AHB prescaler"] - pub const fn hpre(&self) -> super::vals::Hpre { - let val = (self.0 >> 4usize) & 0x0f; - super::vals::Hpre(val as u8) - } - #[doc = "AHB prescaler"] - pub fn set_hpre(&mut self, val: super::vals::Hpre) { - self.0 = (self.0 & !(0x0f << 4usize)) | (((val.0 as u32) & 0x0f) << 4usize); - } - #[doc = "APB low-speed prescaler (APB1)"] - pub fn ppre(&self, n: usize) -> super::vals::Ppre { - assert!(n < 2usize); - let offs = 8usize + n * 3usize; - let val = (self.0 >> offs) & 0x07; - super::vals::Ppre(val as u8) - } - #[doc = "APB low-speed prescaler (APB1)"] - pub fn set_ppre(&mut self, n: usize, val: super::vals::Ppre) { - assert!(n < 2usize); - let offs = 8usize + n * 3usize; - self.0 = (self.0 & !(0x07 << offs)) | (((val.0 as u32) & 0x07) << offs); - } - #[doc = "Wake-up from stop clock selection"] - pub const fn stopwuck(&self) -> super::vals::Stopwuck { - let val = (self.0 >> 15usize) & 0x01; - super::vals::Stopwuck(val as u8) - } - #[doc = "Wake-up from stop clock selection"] - pub fn set_stopwuck(&mut self, val: super::vals::Stopwuck) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); - } - #[doc = "PLL entry clock source"] - pub const fn pllsrc(&self) -> super::vals::Pllsrc { - let val = (self.0 >> 16usize) & 0x01; - super::vals::Pllsrc(val as u8) - } - #[doc = "PLL entry clock source"] - pub fn set_pllsrc(&mut self, val: super::vals::Pllsrc) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); - } - #[doc = "PLL multiplication factor"] - pub const fn pllmul(&self) -> super::vals::Pllmul { - let val = (self.0 >> 18usize) & 0x0f; - super::vals::Pllmul(val as u8) - } - #[doc = "PLL multiplication factor"] - pub fn set_pllmul(&mut self, val: super::vals::Pllmul) { - self.0 = (self.0 & !(0x0f << 18usize)) | (((val.0 as u32) & 0x0f) << 18usize); + pub struct Idc(pub u32); + impl Idc { + #[doc = "Device ID"] + pub const fn dev_id(&self) -> u16 { + let val = (self.0 >> 0usize) & 0x0fff; + val as u16 } - #[doc = "PLL output division"] - pub const fn plldiv(&self) -> super::vals::Plldiv { - let val = (self.0 >> 22usize) & 0x03; - super::vals::Plldiv(val as u8) + #[doc = "Device ID"] + pub fn set_dev_id(&mut self, val: u16) { + self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize); } - #[doc = "PLL output division"] - pub fn set_plldiv(&mut self, val: super::vals::Plldiv) { - self.0 = (self.0 & !(0x03 << 22usize)) | (((val.0 as u32) & 0x03) << 22usize); + #[doc = "Revision ID"] + pub const fn rev_id(&self) -> u16 { + let val = (self.0 >> 16usize) & 0xffff; + val as u16 } - #[doc = "Microcontroller clock output selection"] - pub const fn mcosel(&self) -> super::vals::Mcosel { - let val = (self.0 >> 24usize) & 0x0f; - super::vals::Mcosel(val as u8) + #[doc = "Revision ID"] + pub fn set_rev_id(&mut self, val: u16) { + self.0 = (self.0 & !(0xffff << 16usize)) | (((val as u32) & 0xffff) << 16usize); } - #[doc = "Microcontroller clock output selection"] - pub fn set_mcosel(&mut self, val: super::vals::Mcosel) { - self.0 = (self.0 & !(0x0f << 24usize)) | (((val.0 as u32) & 0x0f) << 24usize); + } + impl Default for Idc { + fn default() -> Idc { + Idc(0) } - #[doc = "Microcontroller clock output prescaler"] - pub const fn mcopre(&self) -> super::vals::Mcopre { - let val = (self.0 >> 28usize) & 0x07; - super::vals::Mcopre(val as u8) + } + #[doc = "APB3 peripheral freeze register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Apb3fz1(pub u32); + impl Apb3fz1 { + #[doc = "WWDG1 stop in debug mode"] + pub const fn wwdg1(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 } - #[doc = "Microcontroller clock output prescaler"] - pub fn set_mcopre(&mut self, val: super::vals::Mcopre) { - self.0 = (self.0 & !(0x07 << 28usize)) | (((val.0 as u32) & 0x07) << 28usize); + #[doc = "WWDG1 stop in debug mode"] + pub fn set_wwdg1(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } } - impl Default for Cfgr { - fn default() -> Cfgr { - Cfgr(0) + impl Default for Apb3fz1 { + fn default() -> Apb3fz1 { + Apb3fz1(0) } } - #[doc = "Clock interrupt flag register"] + #[doc = "APB1L peripheral freeze register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cifr(pub u32); - impl Cifr { - #[doc = "LSI ready interrupt flag"] - pub const fn lsirdyf(&self) -> bool { + pub struct Apb1lfz1(pub u32); + impl Apb1lfz1 { + #[doc = "TIM2 stop in debug mode"] + pub const fn tim2(&self) -> bool { let val = (self.0 >> 0usize) & 0x01; val != 0 } - #[doc = "LSI ready interrupt flag"] - pub fn set_lsirdyf(&mut self, val: bool) { + #[doc = "TIM2 stop in debug mode"] + pub fn set_tim2(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "LSE ready interrupt flag"] - pub const fn lserdyf(&self) -> bool { + #[doc = "TIM3 stop in debug mode"] + pub const fn tim3(&self) -> bool { let val = (self.0 >> 1usize) & 0x01; val != 0 } - #[doc = "LSE ready interrupt flag"] - pub fn set_lserdyf(&mut self, val: bool) { + #[doc = "TIM3 stop in debug mode"] + pub fn set_tim3(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - #[doc = "HSI16 ready interrupt flag"] - pub const fn hsi16rdyf(&self) -> bool { + #[doc = "TIM4 stop in debug mode"] + pub const fn tim4(&self) -> bool { let val = (self.0 >> 2usize) & 0x01; val != 0 } - #[doc = "HSI16 ready interrupt flag"] - pub fn set_hsi16rdyf(&mut self, val: bool) { + #[doc = "TIM4 stop in debug mode"] + pub fn set_tim4(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); } - #[doc = "HSE ready interrupt flag"] - pub const fn hserdyf(&self) -> bool { + #[doc = "TIM5 stop in debug mode"] + pub const fn tim5(&self) -> bool { let val = (self.0 >> 3usize) & 0x01; val != 0 } - #[doc = "HSE ready interrupt flag"] - pub fn set_hserdyf(&mut self, val: bool) { + #[doc = "TIM5 stop in debug mode"] + pub fn set_tim5(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); } - #[doc = "PLL ready interrupt flag"] - pub const fn pllrdyf(&self) -> bool { + #[doc = "TIM6 stop in debug mode"] + pub const fn tim6(&self) -> bool { let val = (self.0 >> 4usize) & 0x01; val != 0 } - #[doc = "PLL ready interrupt flag"] - pub fn set_pllrdyf(&mut self, val: bool) { + #[doc = "TIM6 stop in debug mode"] + pub fn set_tim6(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); } - #[doc = "MSI ready interrupt flag"] - pub const fn msirdyf(&self) -> bool { + #[doc = "TIM7 stop in debug mode"] + pub const fn tim7(&self) -> bool { let val = (self.0 >> 5usize) & 0x01; val != 0 } - #[doc = "MSI ready interrupt flag"] - pub fn set_msirdyf(&mut self, val: bool) { + #[doc = "TIM7 stop in debug mode"] + pub fn set_tim7(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); } - #[doc = "HSI48 ready interrupt flag"] - pub const fn hsi48rdyf(&self) -> bool { + #[doc = "TIM12 stop in debug mode"] + pub const fn tim12(&self) -> bool { let val = (self.0 >> 6usize) & 0x01; val != 0 } - #[doc = "HSI48 ready interrupt flag"] - pub fn set_hsi48rdyf(&mut self, val: bool) { + #[doc = "TIM12 stop in debug mode"] + pub fn set_tim12(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - #[doc = "LSE Clock Security System Interrupt flag"] - pub const fn csslsef(&self) -> super::vals::Csslsef { + #[doc = "TIM13 stop in debug mode"] + pub const fn tim13(&self) -> bool { let val = (self.0 >> 7usize) & 0x01; - super::vals::Csslsef(val as u8) + val != 0 } - #[doc = "LSE Clock Security System Interrupt flag"] - pub fn set_csslsef(&mut self, val: super::vals::Csslsef) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); + #[doc = "TIM13 stop in debug mode"] + pub fn set_tim13(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); } - #[doc = "Clock Security System Interrupt flag"] - pub const fn csshsef(&self) -> super::vals::Csshsef { + #[doc = "TIM14 stop in debug mode"] + pub const fn tim14(&self) -> bool { let val = (self.0 >> 8usize) & 0x01; - super::vals::Csshsef(val as u8) + val != 0 } - #[doc = "Clock Security System Interrupt flag"] - pub fn set_csshsef(&mut self, val: super::vals::Csshsef) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); + #[doc = "TIM14 stop in debug mode"] + pub fn set_tim14(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + } + #[doc = "LPTIM1 stop in debug mode"] + pub const fn lptim1(&self) -> bool { + let val = (self.0 >> 9usize) & 0x01; + val != 0 + } + #[doc = "LPTIM1 stop in debug mode"] + pub fn set_lptim1(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + } + #[doc = "I2C1 SMBUS timeout stop in debug mode"] + pub const fn i2c1(&self) -> bool { + let val = (self.0 >> 21usize) & 0x01; + val != 0 + } + #[doc = "I2C1 SMBUS timeout stop in debug mode"] + pub fn set_i2c1(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); + } + #[doc = "I2C2 SMBUS timeout stop in debug mode"] + pub const fn i2c2(&self) -> bool { + let val = (self.0 >> 22usize) & 0x01; + val != 0 + } + #[doc = "I2C2 SMBUS timeout stop in debug mode"] + pub fn set_i2c2(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); + } + #[doc = "I2C3 SMBUS timeout stop in debug mode"] + pub const fn i2c3(&self) -> bool { + let val = (self.0 >> 23usize) & 0x01; + val != 0 + } + #[doc = "I2C3 SMBUS timeout stop in debug mode"] + pub fn set_i2c3(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize); } } - impl Default for Cifr { - fn default() -> Cifr { - Cifr(0) + impl Default for Apb1lfz1 { + fn default() -> Apb1lfz1 { + Apb1lfz1(0) } } - #[doc = "APB1 peripheral clock enable register"] + #[doc = "APB4 peripheral freeze register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Apb1enr(pub u32); - impl Apb1enr { - #[doc = "Timer2 clock enable bit"] - pub const fn tim2en(&self) -> super::vals::Lptimen { - let val = (self.0 >> 0usize) & 0x01; - super::vals::Lptimen(val as u8) + pub struct Apb4fz1(pub u32); + impl Apb4fz1 { + #[doc = "I2C4 SMBUS timeout stop in debug mode"] + pub const fn i2c4(&self) -> bool { + let val = (self.0 >> 7usize) & 0x01; + val != 0 } - #[doc = "Timer2 clock enable bit"] - pub fn set_tim2en(&mut self, val: super::vals::Lptimen) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + #[doc = "I2C4 SMBUS timeout stop in debug mode"] + pub fn set_i2c4(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); } - #[doc = "Timer3 clock enable bit"] - pub const fn tim3en(&self) -> super::vals::Lptimen { - let val = (self.0 >> 1usize) & 0x01; - super::vals::Lptimen(val as u8) + #[doc = "LPTIM2 stop in debug mode"] + pub const fn lptim2(&self) -> bool { + let val = (self.0 >> 9usize) & 0x01; + val != 0 } - #[doc = "Timer3 clock enable bit"] - pub fn set_tim3en(&mut self, val: super::vals::Lptimen) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + #[doc = "LPTIM2 stop in debug mode"] + pub fn set_lptim2(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); } - #[doc = "Timer 6 clock enable bit"] - pub const fn tim6en(&self) -> super::vals::Lptimen { - let val = (self.0 >> 4usize) & 0x01; - super::vals::Lptimen(val as u8) + #[doc = "LPTIM3 stop in debug mode"] + pub const fn lptim3(&self) -> bool { + let val = (self.0 >> 10usize) & 0x01; + val != 0 } - #[doc = "Timer 6 clock enable bit"] - pub fn set_tim6en(&mut self, val: super::vals::Lptimen) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + #[doc = "LPTIM3 stop in debug mode"] + pub fn set_lptim3(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); } - #[doc = "Timer 7 clock enable bit"] - pub const fn tim7en(&self) -> super::vals::Lptimen { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Lptimen(val as u8) + #[doc = "LPTIM4 stop in debug mode"] + pub const fn lptim4(&self) -> bool { + let val = (self.0 >> 11usize) & 0x01; + val != 0 } - #[doc = "Timer 7 clock enable bit"] - pub fn set_tim7en(&mut self, val: super::vals::Lptimen) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + #[doc = "LPTIM4 stop in debug mode"] + pub fn set_lptim4(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); } - #[doc = "Window watchdog clock enable bit"] - pub const fn wwdgen(&self) -> super::vals::Lptimen { - let val = (self.0 >> 11usize) & 0x01; - super::vals::Lptimen(val as u8) + #[doc = "LPTIM5 stop in debug mode"] + pub const fn lptim5(&self) -> bool { + let val = (self.0 >> 12usize) & 0x01; + val != 0 } - #[doc = "Window watchdog clock enable bit"] - pub fn set_wwdgen(&mut self, val: super::vals::Lptimen) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); + #[doc = "LPTIM5 stop in debug mode"] + pub fn set_lptim5(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); } - #[doc = "SPI2 clock enable bit"] - pub const fn spi2en(&self) -> super::vals::Lptimen { - let val = (self.0 >> 14usize) & 0x01; - super::vals::Lptimen(val as u8) + #[doc = "RTC stop in debug mode"] + pub const fn rtc(&self) -> bool { + let val = (self.0 >> 16usize) & 0x01; + val != 0 } - #[doc = "SPI2 clock enable bit"] - pub fn set_spi2en(&mut self, val: super::vals::Lptimen) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); + #[doc = "RTC stop in debug mode"] + pub fn set_rtc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + } + #[doc = "Independent watchdog for D1 stop in debug mode"] + pub const fn iwdg1(&self) -> bool { + let val = (self.0 >> 18usize) & 0x01; + val != 0 + } + #[doc = "Independent watchdog for D1 stop in debug mode"] + pub fn set_iwdg1(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize); + } + } + impl Default for Apb4fz1 { + fn default() -> Apb4fz1 { + Apb4fz1(0) } - #[doc = "UART2 clock enable bit"] - pub const fn usart2en(&self) -> super::vals::Lptimen { - let val = (self.0 >> 17usize) & 0x01; - super::vals::Lptimen(val as u8) + } + #[doc = "Configuration register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Cr(pub u32); + impl Cr { + #[doc = "Allow debug in D1 Sleep mode"] + pub const fn dbgsleep_d1(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 } - #[doc = "UART2 clock enable bit"] - pub fn set_usart2en(&mut self, val: super::vals::Lptimen) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); + #[doc = "Allow debug in D1 Sleep mode"] + pub fn set_dbgsleep_d1(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "LPUART1 clock enable bit"] - pub const fn lpuart1en(&self) -> super::vals::Lptimen { - let val = (self.0 >> 18usize) & 0x01; - super::vals::Lptimen(val as u8) + #[doc = "Allow debug in D1 Stop mode"] + pub const fn dbgstop_d1(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; + val != 0 } - #[doc = "LPUART1 clock enable bit"] - pub fn set_lpuart1en(&mut self, val: super::vals::Lptimen) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); + #[doc = "Allow debug in D1 Stop mode"] + pub fn set_dbgstop_d1(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - #[doc = "USART4 clock enable bit"] - pub const fn usart4en(&self) -> super::vals::Lptimen { - let val = (self.0 >> 19usize) & 0x01; - super::vals::Lptimen(val as u8) + #[doc = "Allow debug in D1 Standby mode"] + pub const fn dbgstby_d1(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; + val != 0 } - #[doc = "USART4 clock enable bit"] - pub fn set_usart4en(&mut self, val: super::vals::Lptimen) { - self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); + #[doc = "Allow debug in D1 Standby mode"] + pub fn set_dbgstby_d1(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); } - #[doc = "USART5 clock enable bit"] - pub const fn usart5en(&self) -> super::vals::Lptimen { + #[doc = "Trace clock enable enable"] + pub const fn traceclken(&self) -> bool { let val = (self.0 >> 20usize) & 0x01; - super::vals::Lptimen(val as u8) + val != 0 } - #[doc = "USART5 clock enable bit"] - pub fn set_usart5en(&mut self, val: super::vals::Lptimen) { - self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize); + #[doc = "Trace clock enable enable"] + pub fn set_traceclken(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize); } - #[doc = "I2C1 clock enable bit"] - pub const fn i2c1en(&self) -> super::vals::Lptimen { + #[doc = "D1 debug clock enable enable"] + pub const fn d1dbgcken(&self) -> bool { let val = (self.0 >> 21usize) & 0x01; - super::vals::Lptimen(val as u8) + val != 0 } - #[doc = "I2C1 clock enable bit"] - pub fn set_i2c1en(&mut self, val: super::vals::Lptimen) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize); + #[doc = "D1 debug clock enable enable"] + pub fn set_d1dbgcken(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); } - #[doc = "I2C2 clock enable bit"] - pub const fn i2c2en(&self) -> super::vals::Lptimen { + #[doc = "D3 debug clock enable enable"] + pub const fn d3dbgcken(&self) -> bool { let val = (self.0 >> 22usize) & 0x01; - super::vals::Lptimen(val as u8) + val != 0 } - #[doc = "I2C2 clock enable bit"] - pub fn set_i2c2en(&mut self, val: super::vals::Lptimen) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); + #[doc = "D3 debug clock enable enable"] + pub fn set_d3dbgcken(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); } - #[doc = "USB clock enable bit"] - pub const fn usben(&self) -> super::vals::Lptimen { - let val = (self.0 >> 23usize) & 0x01; - super::vals::Lptimen(val as u8) + #[doc = "External trigger output enable"] + pub const fn trgoen(&self) -> bool { + let val = (self.0 >> 28usize) & 0x01; + val != 0 } - #[doc = "USB clock enable bit"] - pub fn set_usben(&mut self, val: super::vals::Lptimen) { - self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize); + #[doc = "External trigger output enable"] + pub fn set_trgoen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize); } - #[doc = "Clock recovery system clock enable bit"] - pub const fn crsen(&self) -> super::vals::Lptimen { - let val = (self.0 >> 27usize) & 0x01; - super::vals::Lptimen(val as u8) + } + impl Default for Cr { + fn default() -> Cr { + Cr(0) } - #[doc = "Clock recovery system clock enable bit"] - pub fn set_crsen(&mut self, val: super::vals::Lptimen) { - self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize); + } + } +} +pub mod gpio_v2 { + use crate::generic::*; + #[doc = "General-purpose I/Os"] + #[derive(Copy, Clone)] + pub struct Gpio(pub *mut u8); + unsafe impl Send for Gpio {} + unsafe impl Sync for Gpio {} + impl Gpio { + #[doc = "GPIO port mode register"] + pub fn moder(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(0usize)) } + } + #[doc = "GPIO port output type register"] + pub fn otyper(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(4usize)) } + } + #[doc = "GPIO port output speed register"] + pub fn ospeedr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(8usize)) } + } + #[doc = "GPIO port pull-up/pull-down register"] + pub fn pupdr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(12usize)) } + } + #[doc = "GPIO port input data register"] + pub fn idr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(16usize)) } + } + #[doc = "GPIO port output data register"] + pub fn odr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(20usize)) } + } + #[doc = "GPIO port bit set/reset register"] + pub fn bsrr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(24usize)) } + } + #[doc = "GPIO port configuration lock register"] + pub fn lckr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(28usize)) } + } + #[doc = "GPIO alternate function register (low, high)"] + pub fn afr(self, n: usize) -> Reg { + assert!(n < 2usize); + unsafe { Reg::from_ptr(self.0.add(32usize + n * 4usize)) } + } + } + pub mod regs { + use crate::generic::*; + #[doc = "GPIO port pull-up/pull-down register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Pupdr(pub u32); + impl Pupdr { + #[doc = "Port x configuration bits (y = 0..15)"] + pub fn pupdr(&self, n: usize) -> super::vals::Pupdr { + assert!(n < 16usize); + let offs = 0usize + n * 2usize; + let val = (self.0 >> offs) & 0x03; + super::vals::Pupdr(val as u8) } - #[doc = "Power interface clock enable bit"] - pub const fn pwren(&self) -> super::vals::Lptimen { - let val = (self.0 >> 28usize) & 0x01; - super::vals::Lptimen(val as u8) + #[doc = "Port x configuration bits (y = 0..15)"] + pub fn set_pupdr(&mut self, n: usize, val: super::vals::Pupdr) { + assert!(n < 16usize); + let offs = 0usize + n * 2usize; + self.0 = (self.0 & !(0x03 << offs)) | (((val.0 as u32) & 0x03) << offs); } - #[doc = "Power interface clock enable bit"] - pub fn set_pwren(&mut self, val: super::vals::Lptimen) { - self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); + } + impl Default for Pupdr { + fn default() -> Pupdr { + Pupdr(0) } - #[doc = "DAC interface clock enable bit"] - pub const fn dacen(&self) -> super::vals::Lptimen { - let val = (self.0 >> 29usize) & 0x01; - super::vals::Lptimen(val as u8) + } + #[doc = "GPIO port bit set/reset register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Bsrr(pub u32); + impl Bsrr { + #[doc = "Port x set bit y (y= 0..15)"] + pub fn bs(&self, n: usize) -> bool { + assert!(n < 16usize); + let offs = 0usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; + val != 0 } - #[doc = "DAC interface clock enable bit"] - pub fn set_dacen(&mut self, val: super::vals::Lptimen) { - self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize); + #[doc = "Port x set bit y (y= 0..15)"] + pub fn set_bs(&mut self, n: usize, val: bool) { + assert!(n < 16usize); + let offs = 0usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); } - #[doc = "I2C3 clock enable bit"] - pub const fn i2c3en(&self) -> super::vals::Lptimen { - let val = (self.0 >> 30usize) & 0x01; - super::vals::Lptimen(val as u8) + #[doc = "Port x set bit y (y= 0..15)"] + pub fn br(&self, n: usize) -> bool { + assert!(n < 16usize); + let offs = 16usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; + val != 0 } - #[doc = "I2C3 clock enable bit"] - pub fn set_i2c3en(&mut self, val: super::vals::Lptimen) { - self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize); + #[doc = "Port x set bit y (y= 0..15)"] + pub fn set_br(&mut self, n: usize, val: bool) { + assert!(n < 16usize); + let offs = 16usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs); + } + } + impl Default for Bsrr { + fn default() -> Bsrr { + Bsrr(0) + } + } + #[doc = "GPIO port configuration lock register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Lckr(pub u32); + impl Lckr { + #[doc = "Port x lock bit y (y= 0..15)"] + pub fn lck(&self, n: usize) -> super::vals::Lck { + assert!(n < 16usize); + let offs = 0usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; + super::vals::Lck(val as u8) + } + #[doc = "Port x lock bit y (y= 0..15)"] + pub fn set_lck(&mut self, n: usize, val: super::vals::Lck) { + assert!(n < 16usize); + let offs = 0usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); } - #[doc = "Low power timer clock enable bit"] - pub const fn lptim1en(&self) -> super::vals::Lptimen { - let val = (self.0 >> 31usize) & 0x01; - super::vals::Lptimen(val as u8) + #[doc = "Port x lock bit y (y= 0..15)"] + pub const fn lckk(&self) -> super::vals::Lckk { + let val = (self.0 >> 16usize) & 0x01; + super::vals::Lckk(val as u8) } - #[doc = "Low power timer clock enable bit"] - pub fn set_lptim1en(&mut self, val: super::vals::Lptimen) { - self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); + #[doc = "Port x lock bit y (y= 0..15)"] + pub fn set_lckk(&mut self, val: super::vals::Lckk) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); } } - impl Default for Apb1enr { - fn default() -> Apb1enr { - Apb1enr(0) + impl Default for Lckr { + fn default() -> Lckr { + Lckr(0) } } - } - pub mod vals { - use crate::generic::*; + #[doc = "GPIO port output data register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Rtcpre(pub u8); - impl Rtcpre { - #[doc = "HSE divided by 2"] - pub const DIV2: Self = Self(0); - #[doc = "HSE divided by 4"] - pub const DIV4: Self = Self(0x01); - #[doc = "HSE divided by 8"] - pub const DIV8: Self = Self(0x02); - #[doc = "HSE divided by 16"] - pub const DIV16: Self = Self(0x03); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Odr(pub u32); + impl Odr { + #[doc = "Port output data (y = 0..15)"] + pub fn odr(&self, n: usize) -> super::vals::Odr { + assert!(n < 16usize); + let offs = 0usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; + super::vals::Odr(val as u8) + } + #[doc = "Port output data (y = 0..15)"] + pub fn set_odr(&mut self, n: usize, val: super::vals::Odr) { + assert!(n < 16usize); + let offs = 0usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Dbgrstw(pub u8); - impl Dbgrstw { - #[doc = "Reset the module"] - pub const RESET: Self = Self(0x01); + impl Default for Odr { + fn default() -> Odr { + Odr(0) + } } + #[doc = "GPIO port mode register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Stopwuck(pub u8); - impl Stopwuck { - #[doc = "Internal 64 KHz to 4 MHz (MSI) oscillator selected as wake-up from Stop clock"] - pub const MSI: Self = Self(0); - #[doc = "Internal 16 MHz (HSI) oscillator selected as wake-up from Stop clock (or HSI16/4 if HSI16DIVEN=1)"] - pub const HSI16: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Moder(pub u32); + impl Moder { + #[doc = "Port x configuration bits (y = 0..15)"] + pub fn moder(&self, n: usize) -> super::vals::Moder { + assert!(n < 16usize); + let offs = 0usize + n * 2usize; + let val = (self.0 >> offs) & 0x03; + super::vals::Moder(val as u8) + } + #[doc = "Port x configuration bits (y = 0..15)"] + pub fn set_moder(&mut self, n: usize, val: super::vals::Moder) { + assert!(n < 16usize); + let offs = 0usize + n * 2usize; + self.0 = (self.0 & !(0x03 << offs)) | (((val.0 as u32) & 0x03) << offs); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Hsirdyie(pub u8); - impl Hsirdyie { - #[doc = "Ready interrupt disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "Ready interrupt enabled"] - pub const ENABLED: Self = Self(0x01); + impl Default for Moder { + fn default() -> Moder { + Moder(0) + } } + #[doc = "GPIO port output type register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Csslse(pub u8); - impl Csslse { - #[doc = "LSE CSS interrupt disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "LSE CSS interrupt enabled"] - pub const ENABLED: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Otyper(pub u32); + impl Otyper { + #[doc = "Port x configuration bits (y = 0..15)"] + pub fn ot(&self, n: usize) -> super::vals::Ot { + assert!(n < 16usize); + let offs = 0usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; + super::vals::Ot(val as u8) + } + #[doc = "Port x configuration bits (y = 0..15)"] + pub fn set_ot(&mut self, n: usize, val: super::vals::Ot) { + assert!(n < 16usize); + let offs = 0usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lsedrv(pub u8); - impl Lsedrv { - #[doc = "Lowest drive"] - pub const LOW: Self = Self(0); - #[doc = "Medium low drive"] - pub const MEDIUMLOW: Self = Self(0x01); - #[doc = "Medium high drive"] - pub const MEDIUMHIGH: Self = Self(0x02); - #[doc = "Highest drive"] - pub const HIGH: Self = Self(0x03); + impl Default for Otyper { + fn default() -> Otyper { + Otyper(0) + } } + #[doc = "GPIO port input data register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Mifsmen(pub u8); - impl Mifsmen { - #[doc = "NVM interface clock disabled in Sleep mode"] - pub const DISABLED: Self = Self(0); - #[doc = "NVM interface clock enabled in Sleep mode"] - pub const ENABLED: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Idr(pub u32); + impl Idr { + #[doc = "Port input data (y = 0..15)"] + pub fn idr(&self, n: usize) -> super::vals::Idr { + assert!(n < 16usize); + let offs = 0usize + n * 1usize; + let val = (self.0 >> offs) & 0x01; + super::vals::Idr(val as u8) + } + #[doc = "Port input data (y = 0..15)"] + pub fn set_idr(&mut self, n: usize, val: super::vals::Idr) { + assert!(n < 16usize); + let offs = 0usize + n * 1usize; + self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); + } + } + impl Default for Idr { + fn default() -> Idr { + Idr(0) + } } + #[doc = "GPIO alternate function register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Iophen(pub u8); - impl Iophen { - #[doc = "Port clock disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "Port clock enabled"] - pub const ENABLED: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Afr(pub u32); + impl Afr { + #[doc = "Alternate function selection for port x bit y (y = 0..15)"] + pub fn afr(&self, n: usize) -> super::vals::Afr { + assert!(n < 8usize); + let offs = 0usize + n * 4usize; + let val = (self.0 >> offs) & 0x0f; + super::vals::Afr(val as u8) + } + #[doc = "Alternate function selection for port x bit y (y = 0..15)"] + pub fn set_afr(&mut self, n: usize, val: super::vals::Afr) { + assert!(n < 8usize); + let offs = 0usize + n * 4usize; + self.0 = (self.0 & !(0x0f << offs)) | (((val.0 as u32) & 0x0f) << offs); + } + } + impl Default for Afr { + fn default() -> Afr { + Afr(0) + } } + #[doc = "GPIO port output speed register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Hsi16rdyfr(pub u8); - impl Hsi16rdyfr { - #[doc = "HSI 16 MHz oscillator not ready"] - pub const NOTREADY: Self = Self(0); - #[doc = "HSI 16 MHz oscillator ready"] - pub const READY: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Ospeedr(pub u32); + impl Ospeedr { + #[doc = "Port x configuration bits (y = 0..15)"] + pub fn ospeedr(&self, n: usize) -> super::vals::Ospeedr { + assert!(n < 16usize); + let offs = 0usize + n * 2usize; + let val = (self.0 >> offs) & 0x03; + super::vals::Ospeedr(val as u8) + } + #[doc = "Port x configuration bits (y = 0..15)"] + pub fn set_ospeedr(&mut self, n: usize, val: super::vals::Ospeedr) { + assert!(n < 16usize); + let offs = 0usize + n * 2usize; + self.0 = (self.0 & !(0x03 << offs)) | (((val.0 as u32) & 0x03) << offs); + } + } + impl Default for Ospeedr { + fn default() -> Ospeedr { + Ospeedr(0) + } } + } + pub mod vals { + use crate::generic::*; #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Csshsecw(pub u8); - impl Csshsecw { - #[doc = "Clear interrupt flag"] - pub const CLEAR: Self = Self(0x01); + pub struct Idr(pub u8); + impl Idr { + #[doc = "Input is logic low"] + pub const LOW: Self = Self(0); + #[doc = "Input is logic high"] + pub const HIGH: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Pllrdyr(pub u8); - impl Pllrdyr { - #[doc = "PLL unlocked"] - pub const UNLOCKED: Self = Self(0); - #[doc = "PLL locked"] - pub const LOCKED: Self = Self(0x01); + pub struct Bsw(pub u8); + impl Bsw { + #[doc = "Sets the corresponding ODRx bit"] + pub const SET: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Hserdyr(pub u8); - impl Hserdyr { - #[doc = "Oscillator is not stable"] - pub const NOTREADY: Self = Self(0); - #[doc = "Oscillator is stable"] - pub const READY: Self = Self(0x01); + pub struct Brw(pub u8); + impl Brw { + #[doc = "Resets the corresponding ODRx bit"] + pub const RESET: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lpuartsel(pub u8); - impl Lpuartsel { - #[doc = "APB clock selected as peripheral clock"] - pub const APB: Self = Self(0); - #[doc = "System clock selected as peripheral clock"] - pub const SYSTEM: Self = Self(0x01); - #[doc = "HSI16 clock selected as peripheral clock"] - pub const HSI16: Self = Self(0x02); - #[doc = "LSE clock selected as peripheral clock"] - pub const LSE: Self = Self(0x03); + pub struct Lck(pub u8); + impl Lck { + #[doc = "Port configuration not locked"] + pub const UNLOCKED: Self = Self(0); + #[doc = "Port configuration locked"] + pub const LOCKED: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Iophrst(pub u8); - impl Iophrst { - #[doc = "Reset I/O port"] - pub const RESET: Self = Self(0x01); + pub struct Lckk(pub u8); + impl Lckk { + #[doc = "Port configuration lock key not active"] + pub const NOTACTIVE: Self = Self(0); + #[doc = "Port configuration lock key active"] + pub const ACTIVE: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Crypen(pub u8); - impl Crypen { - #[doc = "Clock disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "Clock enabled"] - pub const ENABLED: Self = Self(0x01); + pub struct Pupdr(pub u8); + impl Pupdr { + #[doc = "No pull-up, pull-down"] + pub const FLOATING: Self = Self(0); + #[doc = "Pull-up"] + pub const PULLUP: Self = Self(0x01); + #[doc = "Pull-down"] + pub const PULLDOWN: Self = Self(0x02); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Sramsmen(pub u8); - impl Sramsmen { - #[doc = "NVM interface clock disabled in Sleep mode"] - pub const DISABLED: Self = Self(0); - #[doc = "NVM interface clock enabled in Sleep mode"] - pub const ENABLED: Self = Self(0x01); + pub struct Odr(pub u8); + impl Odr { + #[doc = "Set output to logic low"] + pub const LOW: Self = Self(0); + #[doc = "Set output to logic high"] + pub const HIGH: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lptimrstw(pub u8); - impl Lptimrstw { - #[doc = "Reset the module"] - pub const RESET: Self = Self(0x01); + pub struct Moder(pub u8); + impl Moder { + #[doc = "Input mode (reset state)"] + pub const INPUT: Self = Self(0); + #[doc = "General purpose output mode"] + pub const OUTPUT: Self = Self(0x01); + #[doc = "Alternate function mode"] + pub const ALTERNATE: Self = Self(0x02); + #[doc = "Analog mode"] + pub const ANALOG: Self = Self(0x03); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Mcopre(pub u8); - impl Mcopre { - #[doc = "No division"] - pub const DIV1: Self = Self(0); - #[doc = "Division by 2"] - pub const DIV2: Self = Self(0x01); - #[doc = "Division by 4"] - pub const DIV4: Self = Self(0x02); - #[doc = "Division by 8"] - pub const DIV8: Self = Self(0x03); - #[doc = "Division by 16"] - pub const DIV16: Self = Self(0x04); + pub struct Afr(pub u8); + impl Afr { + #[doc = "AF0"] + pub const AF0: Self = Self(0); + #[doc = "AF1"] + pub const AF1: Self = Self(0x01); + #[doc = "AF2"] + pub const AF2: Self = Self(0x02); + #[doc = "AF3"] + pub const AF3: Self = Self(0x03); + #[doc = "AF4"] + pub const AF4: Self = Self(0x04); + #[doc = "AF5"] + pub const AF5: Self = Self(0x05); + #[doc = "AF6"] + pub const AF6: Self = Self(0x06); + #[doc = "AF7"] + pub const AF7: Self = Self(0x07); + #[doc = "AF8"] + pub const AF8: Self = Self(0x08); + #[doc = "AF9"] + pub const AF9: Self = Self(0x09); + #[doc = "AF10"] + pub const AF10: Self = Self(0x0a); + #[doc = "AF11"] + pub const AF11: Self = Self(0x0b); + #[doc = "AF12"] + pub const AF12: Self = Self(0x0c); + #[doc = "AF13"] + pub const AF13: Self = Self(0x0d); + #[doc = "AF14"] + pub const AF14: Self = Self(0x0e); + #[doc = "AF15"] + pub const AF15: Self = Self(0x0f); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lsebyp(pub u8); - impl Lsebyp { - #[doc = "LSE oscillator not bypassed"] - pub const NOTBYPASSED: Self = Self(0); - #[doc = "LSE oscillator bypassed"] - pub const BYPASSED: Self = Self(0x01); + pub struct Ospeedr(pub u8); + impl Ospeedr { + #[doc = "Low speed"] + pub const LOWSPEED: Self = Self(0); + #[doc = "Medium speed"] + pub const MEDIUMSPEED: Self = Self(0x01); + #[doc = "High speed"] + pub const HIGHSPEED: Self = Self(0x02); + #[doc = "Very high speed"] + pub const VERYHIGHSPEED: Self = Self(0x03); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lptimsmen(pub u8); - impl Lptimsmen { - #[doc = "Clock disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "Clock enabled"] - pub const ENABLED: Self = Self(0x01); + pub struct Ot(pub u8); + impl Ot { + #[doc = "Output push-pull (reset state)"] + pub const PUSHPULL: Self = Self(0); + #[doc = "Output open-drain"] + pub const OPENDRAIN: Self = Self(0x01); + } + } +} +pub mod spi_v1 { + use crate::generic::*; + #[doc = "Serial peripheral interface"] + #[derive(Copy, Clone)] + pub struct Spi(pub *mut u8); + unsafe impl Send for Spi {} + unsafe impl Sync for Spi {} + impl Spi { + #[doc = "control register 1"] + pub fn cr1(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(0usize)) } + } + #[doc = "control register 2"] + pub fn cr2(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(4usize)) } + } + #[doc = "status register"] + pub fn sr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(8usize)) } + } + #[doc = "data register"] + pub fn dr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(12usize)) } + } + #[doc = "CRC polynomial register"] + pub fn crcpr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(16usize)) } + } + #[doc = "RX CRC register"] + pub fn rxcrcr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(20usize)) } + } + #[doc = "TX CRC register"] + pub fn txcrcr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(24usize)) } } + } + pub mod vals { + use crate::generic::*; #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Hsi48rdyfr(pub u8); - impl Hsi48rdyfr { - #[doc = "No clock ready interrupt"] - pub const NOTINTERRUPTED: Self = Self(0); - #[doc = "Clock ready interrupt"] - pub const INTERRUPTED: Self = Self(0x01); + pub struct Cpol(pub u8); + impl Cpol { + #[doc = "CK to 0 when idle"] + pub const IDLELOW: Self = Self(0); + #[doc = "CK to 1 when idle"] + pub const IDLEHIGH: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Dmasmen(pub u8); - impl Dmasmen { - #[doc = "DMA clock disabled in Sleep mode"] - pub const DISABLED: Self = Self(0); - #[doc = "DMA clock enabled in Sleep mode"] - pub const ENABLED: Self = Self(0x01); + pub struct Dff(pub u8); + impl Dff { + #[doc = "8-bit data frame format is selected for transmission/reception"] + pub const EIGHTBIT: Self = Self(0); + #[doc = "16-bit data frame format is selected for transmission/reception"] + pub const SIXTEENBIT: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lserdy(pub u8); - impl Lserdy { - #[doc = "Oscillator not ready"] - pub const NOTREADY: Self = Self(0); - #[doc = "Oscillator ready"] - pub const READY: Self = Self(0x01); + pub struct Bidimode(pub u8); + impl Bidimode { + #[doc = "2-line unidirectional data mode selected"] + pub const UNIDIRECTIONAL: Self = Self(0); + #[doc = "1-line bidirectional data mode selected"] + pub const BIDIRECTIONAL: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Msirange(pub u8); - impl Msirange { - #[doc = "range 0 around 65.536 kHz"] - pub const RANGE0: Self = Self(0); - #[doc = "range 1 around 131.072 kHz"] - pub const RANGE1: Self = Self(0x01); - #[doc = "range 2 around 262.144 kHz"] - pub const RANGE2: Self = Self(0x02); - #[doc = "range 3 around 524.288 kHz"] - pub const RANGE3: Self = Self(0x03); - #[doc = "range 4 around 1.048 MHz"] - pub const RANGE4: Self = Self(0x04); - #[doc = "range 5 around 2.097 MHz (reset value)"] - pub const RANGE5: Self = Self(0x05); - #[doc = "range 6 around 4.194 MHz"] - pub const RANGE6: Self = Self(0x06); - #[doc = "not allowed"] - pub const RANGE7: Self = Self(0x07); + pub struct Cpha(pub u8); + impl Cpha { + #[doc = "The first clock transition is the first data capture edge"] + pub const FIRSTEDGE: Self = Self(0); + #[doc = "The second clock transition is the first data capture edge"] + pub const SECONDEDGE: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lptimsel(pub u8); - impl Lptimsel { - #[doc = "APB clock selected as Timer clock"] - pub const APB: Self = Self(0); - #[doc = "LSI clock selected as Timer clock"] - pub const LSI: Self = Self(0x01); - #[doc = "HSI16 clock selected as Timer clock"] - pub const HSI16: Self = Self(0x02); - #[doc = "LSE clock selected as Timer clock"] - pub const LSE: Self = Self(0x03); + pub struct Lsbfirst(pub u8); + impl Lsbfirst { + #[doc = "Data is transmitted/received with the MSB first"] + pub const MSBFIRST: Self = Self(0); + #[doc = "Data is transmitted/received with the LSB first"] + pub const LSBFIRST: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Plldiv(pub u8); - impl Plldiv { - #[doc = "PLLVCO / 2"] - pub const DIV2: Self = Self(0x01); - #[doc = "PLLVCO / 3"] - pub const DIV3: Self = Self(0x02); - #[doc = "PLLVCO / 4"] - pub const DIV4: Self = Self(0x03); + pub struct Bidioe(pub u8); + impl Bidioe { + #[doc = "Output disabled (receive-only mode)"] + pub const OUTPUTDISABLED: Self = Self(0); + #[doc = "Output enabled (transmit-only mode)"] + pub const OUTPUTENABLED: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Rtcsel(pub u8); - impl Rtcsel { - #[doc = "No clock"] - pub const NOCLOCK: Self = Self(0); - #[doc = "LSE oscillator clock used as RTC clock"] - pub const LSE: Self = Self(0x01); - #[doc = "LSI oscillator clock used as RTC clock"] - pub const LSI: Self = Self(0x02); - #[doc = "HSE oscillator clock divided by a programmable prescaler (selection through the RTCPRE[1:0] -bits in the RCC clock control register (RCC_CR)) used as the RTC clock"] - pub const HSE: Self = Self(0x03); + pub struct Mstr(pub u8); + impl Mstr { + #[doc = "Slave configuration"] + pub const SLAVE: Self = Self(0); + #[doc = "Master configuration"] + pub const MASTER: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Csslsed(pub u8); - impl Csslsed { - #[doc = "No failure detected on LSE (32 kHz oscillator)"] - pub const NOFAILURE: Self = Self(0); - #[doc = "Failure detected on LSE (32 kHz oscillator)"] - pub const FAILURE: Self = Self(0x01); + pub struct Iscfg(pub u8); + impl Iscfg { + #[doc = "Slave - transmit"] + pub const SLAVETX: Self = Self(0); + #[doc = "Slave - receive"] + pub const SLAVERX: Self = Self(0x01); + #[doc = "Master - transmit"] + pub const MASTERTX: Self = Self(0x02); + #[doc = "Master - receive"] + pub const MASTERRX: Self = Self(0x03); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Icsel(pub u8); - impl Icsel { - #[doc = "APB clock selected as peripheral clock"] - pub const APB: Self = Self(0); - #[doc = "System clock selected as peripheral clock"] - pub const SYSTEM: Self = Self(0x01); - #[doc = "HSI16 clock selected as peripheral clock"] - pub const HSI16: Self = Self(0x02); + pub struct Frf(pub u8); + impl Frf { + #[doc = "SPI Motorola mode"] + pub const MOTOROLA: Self = Self(0); + #[doc = "SPI TI mode"] + pub const TI: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Hsiouten(pub u8); - impl Hsiouten { - #[doc = "HSI output clock disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "HSI output clock enabled"] - pub const ENABLED: Self = Self(0x01); + pub struct Frer(pub u8); + impl Frer { + #[doc = "No frame format error"] + pub const NOERROR: Self = Self(0); + #[doc = "A frame format error occurred"] + pub const ERROR: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Iophsmen(pub u8); - impl Iophsmen { - #[doc = "Port x clock is disabled in Sleep mode"] - pub const DISABLED: Self = Self(0); - #[doc = "Port x clock is enabled in Sleep mode (if enabled by IOPHEN)"] - pub const ENABLED: Self = Self(0x01); + pub struct Crcnext(pub u8); + impl Crcnext { + #[doc = "Next transmit value is from Tx buffer"] + pub const TXBUFFER: Self = Self(0); + #[doc = "Next transmit value is from Tx CRC register"] + pub const CRC: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Dbgsmen(pub u8); - impl Dbgsmen { - #[doc = "Clock disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "Clock enabled"] - pub const ENABLED: Self = Self(0x01); + pub struct Rxonly(pub u8); + impl Rxonly { + #[doc = "Full duplex (Transmit and receive)"] + pub const FULLDUPLEX: Self = Self(0); + #[doc = "Output disabled (Receive-only mode)"] + pub const OUTPUTDISABLED: Self = Self(0x01); } #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Pllmul(pub u8); - impl Pllmul { - #[doc = "PLL clock entry x 3"] - pub const MUL3: Self = Self(0); - #[doc = "PLL clock entry x 4"] - pub const MUL4: Self = Self(0x01); - #[doc = "PLL clock entry x 6"] - pub const MUL6: Self = Self(0x02); - #[doc = "PLL clock entry x 8"] - pub const MUL8: Self = Self(0x03); - #[doc = "PLL clock entry x 12"] - pub const MUL12: Self = Self(0x04); - #[doc = "PLL clock entry x 16"] - pub const MUL16: Self = Self(0x05); - #[doc = "PLL clock entry x 24"] - pub const MUL24: Self = Self(0x06); - #[doc = "PLL clock entry x 32"] - pub const MUL32: Self = Self(0x07); - #[doc = "PLL clock entry x 48"] - pub const MUL48: Self = Self(0x08); + pub struct Br(pub u8); + impl Br { + #[doc = "f_PCLK / 2"] + pub const DIV2: Self = Self(0); + #[doc = "f_PCLK / 4"] + pub const DIV4: Self = Self(0x01); + #[doc = "f_PCLK / 8"] + pub const DIV8: Self = Self(0x02); + #[doc = "f_PCLK / 16"] + pub const DIV16: Self = Self(0x03); + #[doc = "f_PCLK / 32"] + pub const DIV32: Self = Self(0x04); + #[doc = "f_PCLK / 64"] + pub const DIV64: Self = Self(0x05); + #[doc = "f_PCLK / 128"] + pub const DIV128: Self = Self(0x06); + #[doc = "f_PCLK / 256"] + pub const DIV256: Self = Self(0x07); } + } + pub mod regs { + use crate::generic::*; + #[doc = "TX CRC register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Crcsmen(pub u8); - impl Crcsmen { - #[doc = "Test integration module clock disabled in Sleep mode"] - pub const DISABLED: Self = Self(0); - #[doc = "Test integration module clock enabled in Sleep mode (if enabled by CRCEN)"] - pub const ENABLED: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Txcrcr(pub u32); + impl Txcrcr { + #[doc = "Tx CRC register"] + pub const fn tx_crc(&self) -> u16 { + let val = (self.0 >> 0usize) & 0xffff; + val as u16 + } + #[doc = "Tx CRC register"] + pub fn set_tx_crc(&mut self, val: u16) { + self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); + } } + impl Default for Txcrcr { + fn default() -> Txcrcr { + Txcrcr(0) + } + } + #[doc = "data register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Cryprstw(pub u8); - impl Cryprstw { - #[doc = "Reset the module"] - pub const RESET: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Dr(pub u32); + impl Dr { + #[doc = "Data register"] + pub const fn dr(&self) -> u16 { + let val = (self.0 >> 0usize) & 0xffff; + val as u16 + } + #[doc = "Data register"] + pub fn set_dr(&mut self, val: u16) { + self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); + } + } + impl Default for Dr { + fn default() -> Dr { + Dr(0) + } } + #[doc = "RX CRC register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Pllsrc(pub u8); - impl Pllsrc { - #[doc = "HSI selected as PLL input clock"] - pub const HSI16: Self = Self(0); - #[doc = "HSE selected as PLL input clock"] - pub const HSE: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Rxcrcr(pub u32); + impl Rxcrcr { + #[doc = "Rx CRC register"] + pub const fn rx_crc(&self) -> u16 { + let val = (self.0 >> 0usize) & 0xffff; + val as u16 + } + #[doc = "Rx CRC register"] + pub fn set_rx_crc(&mut self, val: u16) { + self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); + } } + impl Default for Rxcrcr { + fn default() -> Rxcrcr { + Rxcrcr(0) + } + } + #[doc = "CRC polynomial register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Csshsef(pub u8); - impl Csshsef { - #[doc = "No clock security interrupt caused by HSE clock failure"] - pub const NOCLOCK: Self = Self(0); - #[doc = "Clock security interrupt caused by HSE clock failure"] - pub const CLOCK: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Crcpr(pub u32); + impl Crcpr { + #[doc = "CRC polynomial register"] + pub const fn crcpoly(&self) -> u16 { + let val = (self.0 >> 0usize) & 0xffff; + val as u16 + } + #[doc = "CRC polynomial register"] + pub fn set_crcpoly(&mut self, val: u16) { + self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); + } + } + impl Default for Crcpr { + fn default() -> Crcpr { + Crcpr(0) + } } + #[doc = "control register 1"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Hsebyp(pub u8); - impl Hsebyp { - #[doc = "HSE oscillator not bypassed"] - pub const NOTBYPASSED: Self = Self(0); - #[doc = "HSE oscillator bypassed"] - pub const BYPASSED: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Cr1(pub u32); + impl Cr1 { + #[doc = "Clock phase"] + pub const fn cpha(&self) -> super::vals::Cpha { + let val = (self.0 >> 0usize) & 0x01; + super::vals::Cpha(val as u8) + } + #[doc = "Clock phase"] + pub fn set_cpha(&mut self, val: super::vals::Cpha) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); + } + #[doc = "Clock polarity"] + pub const fn cpol(&self) -> super::vals::Cpol { + let val = (self.0 >> 1usize) & 0x01; + super::vals::Cpol(val as u8) + } + #[doc = "Clock polarity"] + pub fn set_cpol(&mut self, val: super::vals::Cpol) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); + } + #[doc = "Master selection"] + pub const fn mstr(&self) -> super::vals::Mstr { + let val = (self.0 >> 2usize) & 0x01; + super::vals::Mstr(val as u8) + } + #[doc = "Master selection"] + pub fn set_mstr(&mut self, val: super::vals::Mstr) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); + } + #[doc = "Baud rate control"] + pub const fn br(&self) -> super::vals::Br { + let val = (self.0 >> 3usize) & 0x07; + super::vals::Br(val as u8) + } + #[doc = "Baud rate control"] + pub fn set_br(&mut self, val: super::vals::Br) { + self.0 = (self.0 & !(0x07 << 3usize)) | (((val.0 as u32) & 0x07) << 3usize); + } + #[doc = "SPI enable"] + pub const fn spe(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 + } + #[doc = "SPI enable"] + pub fn set_spe(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + } + #[doc = "Frame format"] + pub const fn lsbfirst(&self) -> super::vals::Lsbfirst { + let val = (self.0 >> 7usize) & 0x01; + super::vals::Lsbfirst(val as u8) + } + #[doc = "Frame format"] + pub fn set_lsbfirst(&mut self, val: super::vals::Lsbfirst) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize); + } + #[doc = "Internal slave select"] + pub const fn ssi(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 + } + #[doc = "Internal slave select"] + pub fn set_ssi(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + } + #[doc = "Software slave management"] + pub const fn ssm(&self) -> bool { + let val = (self.0 >> 9usize) & 0x01; + val != 0 + } + #[doc = "Software slave management"] + pub fn set_ssm(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + } + #[doc = "Receive only"] + pub const fn rxonly(&self) -> super::vals::Rxonly { + let val = (self.0 >> 10usize) & 0x01; + super::vals::Rxonly(val as u8) + } + #[doc = "Receive only"] + pub fn set_rxonly(&mut self, val: super::vals::Rxonly) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); + } + #[doc = "Data frame format"] + pub const fn dff(&self) -> super::vals::Dff { + let val = (self.0 >> 11usize) & 0x01; + super::vals::Dff(val as u8) + } + #[doc = "Data frame format"] + pub fn set_dff(&mut self, val: super::vals::Dff) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); + } + #[doc = "CRC transfer next"] + pub const fn crcnext(&self) -> super::vals::Crcnext { + let val = (self.0 >> 12usize) & 0x01; + super::vals::Crcnext(val as u8) + } + #[doc = "CRC transfer next"] + pub fn set_crcnext(&mut self, val: super::vals::Crcnext) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); + } + #[doc = "Hardware CRC calculation enable"] + pub const fn crcen(&self) -> bool { + let val = (self.0 >> 13usize) & 0x01; + val != 0 + } + #[doc = "Hardware CRC calculation enable"] + pub fn set_crcen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); + } + #[doc = "Output enable in bidirectional mode"] + pub const fn bidioe(&self) -> super::vals::Bidioe { + let val = (self.0 >> 14usize) & 0x01; + super::vals::Bidioe(val as u8) + } + #[doc = "Output enable in bidirectional mode"] + pub fn set_bidioe(&mut self, val: super::vals::Bidioe) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); + } + #[doc = "Bidirectional data mode enable"] + pub const fn bidimode(&self) -> super::vals::Bidimode { + let val = (self.0 >> 15usize) & 0x01; + super::vals::Bidimode(val as u8) + } + #[doc = "Bidirectional data mode enable"] + pub fn set_bidimode(&mut self, val: super::vals::Bidimode) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Pllon(pub u8); - impl Pllon { - #[doc = "Clock disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "Clock enabled"] - pub const ENABLED: Self = Self(0x01); + impl Default for Cr1 { + fn default() -> Cr1 { + Cr1(0) + } } + #[doc = "status register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Rtcen(pub u8); - impl Rtcen { - #[doc = "RTC clock disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "RTC clock enabled"] - pub const ENABLED: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Sr(pub u32); + impl Sr { + #[doc = "Receive buffer not empty"] + pub const fn rxne(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 + } + #[doc = "Receive buffer not empty"] + pub fn set_rxne(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + } + #[doc = "Transmit buffer empty"] + pub const fn txe(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; + val != 0 + } + #[doc = "Transmit buffer empty"] + pub fn set_txe(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + } + #[doc = "CRC error flag"] + pub const fn crcerr(&self) -> bool { + let val = (self.0 >> 4usize) & 0x01; + val != 0 + } + #[doc = "CRC error flag"] + pub fn set_crcerr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); + } + #[doc = "Mode fault"] + pub const fn modf(&self) -> bool { + let val = (self.0 >> 5usize) & 0x01; + val != 0 + } + #[doc = "Mode fault"] + pub fn set_modf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); + } + #[doc = "Overrun flag"] + pub const fn ovr(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 + } + #[doc = "Overrun flag"] + pub fn set_ovr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + } + #[doc = "Busy flag"] + pub const fn bsy(&self) -> bool { + let val = (self.0 >> 7usize) & 0x01; + val != 0 + } + #[doc = "Busy flag"] + pub fn set_bsy(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + } + #[doc = "TI frame format error"] + pub const fn fre(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 + } + #[doc = "TI frame format error"] + pub fn set_fre(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Hsidivfr(pub u8); - impl Hsidivfr { - #[doc = "16 MHz HSI clock not divided"] - pub const NOTDIVIDED: Self = Self(0); - #[doc = "16 MHz HSI clock divided by 4"] - pub const DIV4: Self = Self(0x01); + impl Default for Sr { + fn default() -> Sr { + Sr(0) + } } + #[doc = "control register 2"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lpwrrstfr(pub u8); - impl Lpwrrstfr { - #[doc = "No reset has occured"] - pub const NORESET: Self = Self(0); - #[doc = "A reset has occured"] - pub const RESET: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Cr2(pub u32); + impl Cr2 { + #[doc = "Rx buffer DMA enable"] + pub const fn rxdmaen(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 + } + #[doc = "Rx buffer DMA enable"] + pub fn set_rxdmaen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + } + #[doc = "Tx buffer DMA enable"] + pub const fn txdmaen(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; + val != 0 + } + #[doc = "Tx buffer DMA enable"] + pub fn set_txdmaen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + } + #[doc = "SS output enable"] + pub const fn ssoe(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; + val != 0 + } + #[doc = "SS output enable"] + pub fn set_ssoe(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); + } + #[doc = "Frame format"] + pub const fn frf(&self) -> super::vals::Frf { + let val = (self.0 >> 4usize) & 0x01; + super::vals::Frf(val as u8) + } + #[doc = "Frame format"] + pub fn set_frf(&mut self, val: super::vals::Frf) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + } + #[doc = "Error interrupt enable"] + pub const fn errie(&self) -> bool { + let val = (self.0 >> 5usize) & 0x01; + val != 0 + } + #[doc = "Error interrupt enable"] + pub fn set_errie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); + } + #[doc = "RX buffer not empty interrupt enable"] + pub const fn rxneie(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 + } + #[doc = "RX buffer not empty interrupt enable"] + pub fn set_rxneie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + } + #[doc = "Tx buffer empty interrupt enable"] + pub const fn txeie(&self) -> bool { + let val = (self.0 >> 7usize) & 0x01; + val != 0 + } + #[doc = "Tx buffer empty interrupt enable"] + pub fn set_txeie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Hsidiven(pub u8); - impl Hsidiven { - #[doc = "no 16 MHz HSI division requested"] - pub const NOTDIVIDED: Self = Self(0); - #[doc = "16 MHz HSI division by 4 requested"] - pub const DIV4: Self = Self(0x01); + impl Default for Cr2 { + fn default() -> Cr2 { + Cr2(0) + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Rmvfw(pub u8); - impl Rmvfw { - #[doc = "Clears the reset flag"] - pub const CLEAR: Self = Self(0x01); + } +} +pub mod syscfg_f4 { + use crate::generic::*; + #[doc = "System configuration controller"] + #[derive(Copy, Clone)] + pub struct Syscfg(pub *mut u8); + unsafe impl Send for Syscfg {} + unsafe impl Sync for Syscfg {} + impl Syscfg { + #[doc = "memory remap register"] + pub fn memrm(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(0usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ppre(pub u8); - impl Ppre { - #[doc = "HCLK not divided"] - pub const DIV1: Self = Self(0); - #[doc = "HCLK divided by 2"] - pub const DIV2: Self = Self(0x04); - #[doc = "HCLK divided by 4"] - pub const DIV4: Self = Self(0x05); - #[doc = "HCLK divided by 8"] - pub const DIV8: Self = Self(0x06); - #[doc = "HCLK divided by 16"] - pub const DIV16: Self = Self(0x07); + #[doc = "peripheral mode configuration register"] + pub fn pmc(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(4usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Sws(pub u8); - impl Sws { - #[doc = "MSI oscillator used as system clock"] - pub const MSI: Self = Self(0); - #[doc = "HSI oscillator used as system clock"] - pub const HSI16: Self = Self(0x01); - #[doc = "HSE oscillator used as system clock"] - pub const HSE: Self = Self(0x02); - #[doc = "PLL used as system clock"] - pub const PLL: Self = Self(0x03); + #[doc = "external interrupt configuration register"] + pub fn exticr(self, n: usize) -> Reg { + assert!(n < 4usize); + unsafe { Reg::from_ptr(self.0.add(8usize + n * 4usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Csslsef(pub u8); - impl Csslsef { - #[doc = "No failure detected on LSE clock failure"] - pub const NOFAILURE: Self = Self(0); - #[doc = "Failure detected on LSE clock failure"] - pub const FAILURE: Self = Self(0x01); + #[doc = "Compensation cell control register"] + pub fn cmpcr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(32usize)) } } + } + pub mod regs { + use crate::generic::*; + #[doc = "peripheral mode configuration register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Mcosel(pub u8); - impl Mcosel { - #[doc = "No clock"] - pub const NOCLOCK: Self = Self(0); - #[doc = "SYSCLK clock selected"] - pub const SYSCLK: Self = Self(0x01); - #[doc = "HSI oscillator clock selected"] - pub const HSI16: Self = Self(0x02); - #[doc = "MSI oscillator clock selected"] - pub const MSI: Self = Self(0x03); - #[doc = "HSE oscillator clock selected"] - pub const HSE: Self = Self(0x04); - #[doc = "PLL clock selected"] - pub const PLL: Self = Self(0x05); - #[doc = "LSI oscillator clock selected"] - pub const LSI: Self = Self(0x06); - #[doc = "LSE oscillator clock selected"] - pub const LSE: Self = Self(0x07); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Pmc(pub u32); + impl Pmc { + #[doc = "ADC1DC2"] + pub const fn adc1dc2(&self) -> bool { + let val = (self.0 >> 16usize) & 0x01; + val != 0 + } + #[doc = "ADC1DC2"] + pub fn set_adc1dc2(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + } + #[doc = "ADC2DC2"] + pub const fn adc2dc2(&self) -> bool { + let val = (self.0 >> 17usize) & 0x01; + val != 0 + } + #[doc = "ADC2DC2"] + pub fn set_adc2dc2(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); + } + #[doc = "ADC3DC2"] + pub const fn adc3dc2(&self) -> bool { + let val = (self.0 >> 18usize) & 0x01; + val != 0 + } + #[doc = "ADC3DC2"] + pub fn set_adc3dc2(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize); + } + #[doc = "Ethernet PHY interface selection"] + pub const fn mii_rmii_sel(&self) -> bool { + let val = (self.0 >> 23usize) & 0x01; + val != 0 + } + #[doc = "Ethernet PHY interface selection"] + pub fn set_mii_rmii_sel(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Hpre(pub u8); - impl Hpre { - #[doc = "system clock not divided"] - pub const DIV1: Self = Self(0); - #[doc = "system clock divided by 2"] - pub const DIV2: Self = Self(0x08); - #[doc = "system clock divided by 4"] - pub const DIV4: Self = Self(0x09); - #[doc = "system clock divided by 8"] - pub const DIV8: Self = Self(0x0a); - #[doc = "system clock divided by 16"] - pub const DIV16: Self = Self(0x0b); - #[doc = "system clock divided by 64"] - pub const DIV64: Self = Self(0x0c); - #[doc = "system clock divided by 128"] - pub const DIV128: Self = Self(0x0d); - #[doc = "system clock divided by 256"] - pub const DIV256: Self = Self(0x0e); - #[doc = "system clock divided by 512"] - pub const DIV512: Self = Self(0x0f); + impl Default for Pmc { + fn default() -> Pmc { + Pmc(0) + } } + #[doc = "external interrupt configuration register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Crypsmen(pub u8); - impl Crypsmen { - #[doc = "Crypto clock disabled in Sleep mode"] - pub const DISABLED: Self = Self(0); - #[doc = "Crypto clock enabled in Sleep mode"] - pub const ENABLED: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Exticr(pub u32); + impl Exticr { + #[doc = "EXTI x configuration"] + pub fn exti(&self, n: usize) -> u8 { + assert!(n < 4usize); + let offs = 0usize + n * 4usize; + let val = (self.0 >> offs) & 0x0f; + val as u8 + } + #[doc = "EXTI x configuration"] + pub fn set_exti(&mut self, n: usize, val: u8) { + assert!(n < 4usize); + let offs = 0usize + n * 4usize; + self.0 = (self.0 & !(0x0f << offs)) | (((val as u32) & 0x0f) << offs); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lptimen(pub u8); - impl Lptimen { - #[doc = "Clock disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "Clock enabled"] - pub const ENABLED: Self = Self(0x01); + impl Default for Exticr { + fn default() -> Exticr { + Exticr(0) + } } + #[doc = "memory remap register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Rtcrstw(pub u8); - impl Rtcrstw { - #[doc = "Resets the RTC peripheral"] - pub const RESET: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Memrm(pub u32); + impl Memrm { + #[doc = "Memory mapping selection"] + pub const fn mem_mode(&self) -> u8 { + let val = (self.0 >> 0usize) & 0x07; + val as u8 + } + #[doc = "Memory mapping selection"] + pub fn set_mem_mode(&mut self, val: u8) { + self.0 = (self.0 & !(0x07 << 0usize)) | (((val as u32) & 0x07) << 0usize); + } + #[doc = "Flash bank mode selection"] + pub const fn fb_mode(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 + } + #[doc = "Flash bank mode selection"] + pub fn set_fb_mode(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + } + #[doc = "FMC memory mapping swap"] + pub const fn swp_fmc(&self) -> u8 { + let val = (self.0 >> 10usize) & 0x03; + val as u8 + } + #[doc = "FMC memory mapping swap"] + pub fn set_swp_fmc(&mut self, val: u8) { + self.0 = (self.0 & !(0x03 << 10usize)) | (((val as u32) & 0x03) << 10usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Sw(pub u8); - impl Sw { - #[doc = "MSI oscillator used as system clock"] - pub const MSI: Self = Self(0); - #[doc = "HSI oscillator used as system clock"] - pub const HSI16: Self = Self(0x01); - #[doc = "HSE oscillator used as system clock"] - pub const HSE: Self = Self(0x02); - #[doc = "PLL used as system clock"] - pub const PLL: Self = Self(0x03); + impl Default for Memrm { + fn default() -> Memrm { + Memrm(0) + } } + #[doc = "Compensation cell control register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Csslseon(pub u8); - impl Csslseon { - #[doc = "Oscillator OFF"] - pub const OFF: Self = Self(0); - #[doc = "Oscillator ON"] - pub const ON: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Cmpcr(pub u32); + impl Cmpcr { + #[doc = "Compensation cell power-down"] + pub const fn cmp_pd(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 + } + #[doc = "Compensation cell power-down"] + pub fn set_cmp_pd(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + } + #[doc = "READY"] + pub const fn ready(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 + } + #[doc = "READY"] + pub fn set_ready(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Dbgen(pub u8); - impl Dbgen { - #[doc = "Clock disabled"] - pub const DISABLED: Self = Self(0); - #[doc = "Clock enabled"] - pub const ENABLED: Self = Self(0x01); + impl Default for Cmpcr { + fn default() -> Cmpcr { + Cmpcr(0) + } } } } -pub mod usart_v2 { +pub mod spi_v3 { use crate::generic::*; - #[doc = "Universal synchronous asynchronous receiver transmitter"] + #[doc = "Serial peripheral interface"] #[derive(Copy, Clone)] - pub struct Usart(pub *mut u8); - unsafe impl Send for Usart {} - unsafe impl Sync for Usart {} - impl Usart { - #[doc = "Control register 1"] + pub struct Spi(pub *mut u8); + unsafe impl Send for Spi {} + unsafe impl Sync for Spi {} + impl Spi { + #[doc = "control register 1"] pub fn cr1(self) -> Reg { unsafe { Reg::from_ptr(self.0.add(0usize)) } } - #[doc = "Control register 2"] + #[doc = "control register 2"] pub fn cr2(self) -> Reg { unsafe { Reg::from_ptr(self.0.add(4usize)) } } - #[doc = "Control register 3"] - pub fn cr3(self) -> Reg { + #[doc = "configuration register 1"] + pub fn cfg1(self) -> Reg { unsafe { Reg::from_ptr(self.0.add(8usize)) } } - #[doc = "Baud rate register"] - pub fn brr(self) -> Reg { + #[doc = "configuration register 2"] + pub fn cfg2(self) -> Reg { unsafe { Reg::from_ptr(self.0.add(12usize)) } } - #[doc = "Guard time and prescaler register"] - pub fn gtpr(self) -> Reg { + #[doc = "Interrupt Enable Register"] + pub fn ier(self) -> Reg { unsafe { Reg::from_ptr(self.0.add(16usize)) } } - #[doc = "Receiver timeout register"] - pub fn rtor(self) -> Reg { + #[doc = "Status Register"] + pub fn sr(self) -> Reg { unsafe { Reg::from_ptr(self.0.add(20usize)) } } - #[doc = "Request register"] - pub fn rqr(self) -> Reg { + #[doc = "Interrupt/Status Flags Clear Register"] + pub fn ifcr(self) -> Reg { unsafe { Reg::from_ptr(self.0.add(24usize)) } } - #[doc = "Interrupt & status register"] - pub fn isr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(28usize)) } - } - #[doc = "Interrupt flag clear register"] - pub fn icr(self) -> Reg { + #[doc = "Transmit Data Register"] + pub fn txdr(self) -> Reg { unsafe { Reg::from_ptr(self.0.add(32usize)) } } - #[doc = "Receive data register"] - pub fn rdr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(36usize)) } - } - #[doc = "Transmit data register"] - pub fn tdr(self) -> Reg { - unsafe { Reg::from_ptr(self.0.add(40usize)) } - } - } - pub mod vals { - use crate::generic::*; - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Abrrq(pub u8); - impl Abrrq { - #[doc = "resets the ABRF flag in the USART_ISR and request an automatic baud rate measurement on the next received data frame"] - pub const REQUEST: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Cpha(pub u8); - impl Cpha { - #[doc = "The first clock transition is the first data capture edge"] - pub const FIRST: Self = Self(0); - #[doc = "The second clock transition is the first data capture edge"] - pub const SECOND: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct M1(pub u8); - impl M1 { - #[doc = "Use M0 to set the data bits"] - pub const M0: Self = Self(0); - #[doc = "1 start bit, 7 data bits, n stop bits"] - pub const BIT7: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Swap(pub u8); - impl Swap { - #[doc = "TX/RX pins are used as defined in standard pinout"] - pub const STANDARD: Self = Self(0); - #[doc = "The TX and RX pins functions are swapped"] - pub const SWAPPED: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Wus(pub u8); - impl Wus { - #[doc = "WUF active on address match"] - pub const ADDRESS: Self = Self(0); - #[doc = "WuF active on Start bit detection"] - pub const START: Self = Self(0x02); - #[doc = "WUF active on RXNE"] - pub const RXNE: Self = Self(0x03); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Sbkrq(pub u8); - impl Sbkrq { - #[doc = "sets the SBKF flag and request to send a BREAK on the line, as soon as the transmit machine is available"] - pub const BREAK: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ovrdis(pub u8); - impl Ovrdis { - #[doc = "Overrun Error Flag, ORE, is set when received data is not read before receiving new data"] - pub const ENABLED: Self = Self(0); - #[doc = "Overrun functionality is disabled. If new data is received while the RXNE flag is still set the ORE flag is not set and the new received data overwrites the previous content of the RDR register"] - pub const DISABLED: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Rxfrq(pub u8); - impl Rxfrq { - #[doc = "clears the RXNE flag. This allows to discard the received data without reading it, and avoid an overrun condition"] - pub const DISCARD: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Irlp(pub u8); - impl Irlp { - #[doc = "Normal mode"] - pub const NORMAL: Self = Self(0); - #[doc = "Low-power mode"] - pub const LOWPOWER: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct M0(pub u8); - impl M0 { - #[doc = "1 start bit, 8 data bits, n stop bits"] - pub const BIT8: Self = Self(0); - #[doc = "1 start bit, 9 data bits, n stop bits"] - pub const BIT9: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Abrmod(pub u8); - impl Abrmod { - #[doc = "Measurement of the start bit is used to detect the baud rate"] - pub const START: Self = Self(0); - #[doc = "Falling edge to falling edge measurement"] - pub const EDGE: Self = Self(0x01); - #[doc = "0x7F frame detection"] - pub const FRAME7F: Self = Self(0x02); - #[doc = "0x55 frame detection"] - pub const FRAME55: Self = Self(0x03); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ddre(pub u8); - impl Ddre { - #[doc = "DMA is not disabled in case of reception error"] - pub const NOTDISABLED: Self = Self(0); - #[doc = "DMA is disabled following a reception error"] - pub const DISABLED: Self = Self(0x01); - } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Msbfirst(pub u8); - impl Msbfirst { - #[doc = "data is transmitted/received with data bit 0 first, following the start bit"] - pub const LSB: Self = Self(0); - #[doc = "data is transmitted/received with MSB (bit 7/8/9) first, following the start bit"] - pub const MSB: Self = Self(0x01); + #[doc = "Receive Data Register"] + pub fn rxdr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(48usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Cpol(pub u8); - impl Cpol { - #[doc = "Steady low value on CK pin outside transmission window"] - pub const LOW: Self = Self(0); - #[doc = "Steady high value on CK pin outside transmission window"] - pub const HIGH: Self = Self(0x01); + #[doc = "Polynomial Register"] + pub fn crcpoly(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(64usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Hdsel(pub u8); - impl Hdsel { - #[doc = "Half duplex mode is not selected"] - pub const NOTSELECTED: Self = Self(0); - #[doc = "Half duplex mode is selected"] - pub const SELECTED: Self = Self(0x01); + #[doc = "Transmitter CRC Register"] + pub fn txcrc(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(68usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Dep(pub u8); - impl Dep { - #[doc = "DE signal is active high"] - pub const HIGH: Self = Self(0); - #[doc = "DE signal is active low"] - pub const LOW: Self = Self(0x01); + #[doc = "Receiver CRC Register"] + pub fn rxcrc(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(72usize)) } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lbdl(pub u8); - impl Lbdl { - #[doc = "10-bit break detection"] - pub const BIT10: Self = Self(0); - #[doc = "11-bit break detection"] - pub const BIT11: Self = Self(0x01); + #[doc = "Underrun Data Register"] + pub fn udrdr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(76usize)) } } + } + pub mod regs { + use crate::generic::*; + #[doc = "control register 2"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Datainv(pub u8); - impl Datainv { - #[doc = "Logical data from the data register are send/received in positive/direct logic"] - pub const POSITIVE: Self = Self(0); - #[doc = "Logical data from the data register are send/received in negative/inverse logic"] - pub const NEGATIVE: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Cr2(pub u32); + impl Cr2 { + #[doc = "Number of data at current transfer"] + pub const fn tsize(&self) -> u16 { + let val = (self.0 >> 0usize) & 0xffff; + val as u16 + } + #[doc = "Number of data at current transfer"] + pub fn set_tsize(&mut self, val: u16) { + self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); + } + #[doc = "Number of data transfer extension to be reload into TSIZE just when a previous"] + pub const fn tser(&self) -> u16 { + let val = (self.0 >> 16usize) & 0xffff; + val as u16 + } + #[doc = "Number of data transfer extension to be reload into TSIZE just when a previous"] + pub fn set_tser(&mut self, val: u16) { + self.0 = (self.0 & !(0xffff << 16usize)) | (((val as u32) & 0xffff) << 16usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Lbcl(pub u8); - impl Lbcl { - #[doc = "The clock pulse of the last data bit is not output to the CK pin"] - pub const NOTOUTPUT: Self = Self(0); - #[doc = "The clock pulse of the last data bit is output to the CK pin"] - pub const OUTPUT: Self = Self(0x01); + impl Default for Cr2 { + fn default() -> Cr2 { + Cr2(0) + } } + #[doc = "Transmit Data Register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Txinv(pub u8); - impl Txinv { - #[doc = "TX pin signal works using the standard logic levels"] - pub const STANDARD: Self = Self(0); - #[doc = "TX pin signal values are inverted"] - pub const INVERTED: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Txdr(pub u32); + impl Txdr { + #[doc = "Transmit data register"] + pub const fn txdr(&self) -> u32 { + let val = (self.0 >> 0usize) & 0xffff_ffff; + val as u32 + } + #[doc = "Transmit data register"] + pub fn set_txdr(&mut self, val: u32) { + self.0 = + (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Addm(pub u8); - impl Addm { - #[doc = "4-bit address detection"] - pub const BIT4: Self = Self(0); - #[doc = "7-bit address detection"] - pub const BIT7: Self = Self(0x01); + impl Default for Txdr { + fn default() -> Txdr { + Txdr(0) + } } + #[doc = "Polynomial Register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Stop(pub u8); - impl Stop { - #[doc = "1 stop bit"] - pub const STOP1: Self = Self(0); - #[doc = "0.5 stop bit"] - pub const STOP0P5: Self = Self(0x01); - #[doc = "2 stop bit"] - pub const STOP2: Self = Self(0x02); - #[doc = "1.5 stop bit"] - pub const STOP1P5: Self = Self(0x03); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Crcpoly(pub u32); + impl Crcpoly { + #[doc = "CRC polynomial register"] + pub const fn crcpoly(&self) -> u32 { + let val = (self.0 >> 0usize) & 0xffff_ffff; + val as u32 + } + #[doc = "CRC polynomial register"] + pub fn set_crcpoly(&mut self, val: u32) { + self.0 = + (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Txfrq(pub u8); - impl Txfrq { - #[doc = "Set the TXE flags. This allows to discard the transmit data"] - pub const DISCARD: Self = Self(0x01); + impl Default for Crcpoly { + fn default() -> Crcpoly { + Crcpoly(0) + } } + #[doc = "Status Register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Wake(pub u8); - impl Wake { - #[doc = "Idle line"] - pub const IDLE: Self = Self(0); - #[doc = "Address mask"] - pub const ADDRESS: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Sr(pub u32); + impl Sr { + #[doc = "Rx-Packet available"] + pub const fn rxp(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 + } + #[doc = "Rx-Packet available"] + pub fn set_rxp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + } + #[doc = "Tx-Packet space available"] + pub const fn txp(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; + val != 0 + } + #[doc = "Tx-Packet space available"] + pub fn set_txp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); + } + #[doc = "Duplex Packet"] + pub const fn dxp(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; + val != 0 + } + #[doc = "Duplex Packet"] + pub fn set_dxp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); + } + #[doc = "End Of Transfer"] + pub const fn eot(&self) -> bool { + let val = (self.0 >> 3usize) & 0x01; + val != 0 + } + #[doc = "End Of Transfer"] + pub fn set_eot(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); + } + #[doc = "Transmission Transfer Filled"] + pub const fn txtf(&self) -> bool { + let val = (self.0 >> 4usize) & 0x01; + val != 0 + } + #[doc = "Transmission Transfer Filled"] + pub fn set_txtf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); + } + #[doc = "Underrun at slave transmission mode"] + pub const fn udr(&self) -> bool { + let val = (self.0 >> 5usize) & 0x01; + val != 0 + } + #[doc = "Underrun at slave transmission mode"] + pub fn set_udr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); + } + #[doc = "Overrun"] + pub const fn ovr(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; + val != 0 + } + #[doc = "Overrun"] + pub fn set_ovr(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + } + #[doc = "CRC Error"] + pub const fn crce(&self) -> bool { + let val = (self.0 >> 7usize) & 0x01; + val != 0 + } + #[doc = "CRC Error"] + pub fn set_crce(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); + } + #[doc = "TI frame format error"] + pub const fn tifre(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 + } + #[doc = "TI frame format error"] + pub fn set_tifre(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + } + #[doc = "Mode Fault"] + pub const fn modf(&self) -> bool { + let val = (self.0 >> 9usize) & 0x01; + val != 0 + } + #[doc = "Mode Fault"] + pub fn set_modf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + } + #[doc = "Additional number of SPI data to be transacted was reload"] + pub const fn tserf(&self) -> bool { + let val = (self.0 >> 10usize) & 0x01; + val != 0 + } + #[doc = "Additional number of SPI data to be transacted was reload"] + pub fn set_tserf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); + } + #[doc = "SUSPend"] + pub const fn susp(&self) -> bool { + let val = (self.0 >> 11usize) & 0x01; + val != 0 + } + #[doc = "SUSPend"] + pub fn set_susp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); + } + #[doc = "TxFIFO transmission complete"] + pub const fn txc(&self) -> bool { + let val = (self.0 >> 12usize) & 0x01; + val != 0 + } + #[doc = "TxFIFO transmission complete"] + pub fn set_txc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); + } + #[doc = "RxFIFO Packing LeVeL"] + pub const fn rxplvl(&self) -> super::vals::Rxplvl { + let val = (self.0 >> 13usize) & 0x03; + super::vals::Rxplvl(val as u8) + } + #[doc = "RxFIFO Packing LeVeL"] + pub fn set_rxplvl(&mut self, val: super::vals::Rxplvl) { + self.0 = (self.0 & !(0x03 << 13usize)) | (((val.0 as u32) & 0x03) << 13usize); + } + #[doc = "RxFIFO Word Not Empty"] + pub const fn rxwne(&self) -> super::vals::Rxwne { + let val = (self.0 >> 15usize) & 0x01; + super::vals::Rxwne(val as u8) + } + #[doc = "RxFIFO Word Not Empty"] + pub fn set_rxwne(&mut self, val: super::vals::Rxwne) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + } + #[doc = "Number of data frames remaining in current TSIZE session"] + pub const fn ctsize(&self) -> u16 { + let val = (self.0 >> 16usize) & 0xffff; + val as u16 + } + #[doc = "Number of data frames remaining in current TSIZE session"] + pub fn set_ctsize(&mut self, val: u16) { + self.0 = (self.0 & !(0xffff << 16usize)) | (((val as u32) & 0xffff) << 16usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Ps(pub u8); - impl Ps { - #[doc = "Even parity"] - pub const EVEN: Self = Self(0); - #[doc = "Odd parity"] - pub const ODD: Self = Self(0x01); + impl Default for Sr { + fn default() -> Sr { + Sr(0) + } } + #[doc = "Underrun Data Register"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Over(pub u8); - impl Over { - #[doc = "Oversampling by 16"] - pub const OVERSAMPLING16: Self = Self(0); - #[doc = "Oversampling by 8"] - pub const OVERSAMPLING8: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Udrdr(pub u32); + impl Udrdr { + #[doc = "Data at slave underrun condition"] + pub const fn udrdr(&self) -> u32 { + let val = (self.0 >> 0usize) & 0xffff_ffff; + val as u32 + } + #[doc = "Data at slave underrun condition"] + pub fn set_udrdr(&mut self, val: u32) { + self.0 = + (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Mmrq(pub u8); - impl Mmrq { - #[doc = "Puts the USART in mute mode and sets the RWU flag"] - pub const MUTE: Self = Self(0x01); + impl Default for Udrdr { + fn default() -> Udrdr { + Udrdr(0) + } } + #[doc = "configuration register 1"] #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Rxinv(pub u8); - impl Rxinv { - #[doc = "RX pin signal works using the standard logic levels"] - pub const STANDARD: Self = Self(0); - #[doc = "RX pin signal values are inverted"] - pub const INVERTED: Self = Self(0x01); + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Cfg1(pub u32); + impl Cfg1 { + #[doc = "Number of bits in at single SPI data frame"] + pub const fn dsize(&self) -> u8 { + let val = (self.0 >> 0usize) & 0x1f; + val as u8 + } + #[doc = "Number of bits in at single SPI data frame"] + pub fn set_dsize(&mut self, val: u8) { + self.0 = (self.0 & !(0x1f << 0usize)) | (((val as u32) & 0x1f) << 0usize); + } + #[doc = "threshold level"] + pub const fn fthlv(&self) -> super::vals::Fthlv { + let val = (self.0 >> 5usize) & 0x0f; + super::vals::Fthlv(val as u8) + } + #[doc = "threshold level"] + pub fn set_fthlv(&mut self, val: super::vals::Fthlv) { + self.0 = (self.0 & !(0x0f << 5usize)) | (((val.0 as u32) & 0x0f) << 5usize); + } + #[doc = "Behavior of slave transmitter at underrun condition"] + pub const fn udrcfg(&self) -> super::vals::Udrcfg { + let val = (self.0 >> 9usize) & 0x03; + super::vals::Udrcfg(val as u8) + } + #[doc = "Behavior of slave transmitter at underrun condition"] + pub fn set_udrcfg(&mut self, val: super::vals::Udrcfg) { + self.0 = (self.0 & !(0x03 << 9usize)) | (((val.0 as u32) & 0x03) << 9usize); + } + #[doc = "Detection of underrun condition at slave transmitter"] + pub const fn udrdet(&self) -> super::vals::Udrdet { + let val = (self.0 >> 11usize) & 0x03; + super::vals::Udrdet(val as u8) + } + #[doc = "Detection of underrun condition at slave transmitter"] + pub fn set_udrdet(&mut self, val: super::vals::Udrdet) { + self.0 = (self.0 & !(0x03 << 11usize)) | (((val.0 as u32) & 0x03) << 11usize); + } + #[doc = "Rx DMA stream enable"] + pub const fn rxdmaen(&self) -> bool { + let val = (self.0 >> 14usize) & 0x01; + val != 0 + } + #[doc = "Rx DMA stream enable"] + pub fn set_rxdmaen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); + } + #[doc = "Tx DMA stream enable"] + pub const fn txdmaen(&self) -> bool { + let val = (self.0 >> 15usize) & 0x01; + val != 0 + } + #[doc = "Tx DMA stream enable"] + pub fn set_txdmaen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); + } + #[doc = "Length of CRC frame to be transacted and compared"] + pub const fn crcsize(&self) -> u8 { + let val = (self.0 >> 16usize) & 0x1f; + val as u8 + } + #[doc = "Length of CRC frame to be transacted and compared"] + pub fn set_crcsize(&mut self, val: u8) { + self.0 = (self.0 & !(0x1f << 16usize)) | (((val as u32) & 0x1f) << 16usize); + } + #[doc = "Hardware CRC computation enable"] + pub const fn crcen(&self) -> bool { + let val = (self.0 >> 22usize) & 0x01; + val != 0 + } + #[doc = "Hardware CRC computation enable"] + pub fn set_crcen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); + } + #[doc = "Master baud rate"] + pub const fn mbr(&self) -> super::vals::Mbr { + let val = (self.0 >> 28usize) & 0x07; + super::vals::Mbr(val as u8) + } + #[doc = "Master baud rate"] + pub fn set_mbr(&mut self, val: super::vals::Mbr) { + self.0 = (self.0 & !(0x07 << 28usize)) | (((val.0 as u32) & 0x07) << 28usize); + } } - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] - pub struct Onebit(pub u8); - impl Onebit { - #[doc = "Three sample bit method"] - pub const SAMPLE3: Self = Self(0); - #[doc = "One sample bit method"] - pub const SAMPLE1: Self = Self(0x01); + impl Default for Cfg1 { + fn default() -> Cfg1 { + Cfg1(0) + } } - } - pub mod regs { - use crate::generic::*; - #[doc = "Guard time and prescaler register"] + #[doc = "control register 1"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Gtpr(pub u32); - impl Gtpr { - #[doc = "Prescaler value"] - pub const fn psc(&self) -> u8 { - let val = (self.0 >> 0usize) & 0xff; - val as u8 + pub struct Cr1(pub u32); + impl Cr1 { + #[doc = "Serial Peripheral Enable"] + pub const fn spe(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 + } + #[doc = "Serial Peripheral Enable"] + pub fn set_spe(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); + } + #[doc = "Master automatic SUSP in Receive mode"] + pub const fn masrx(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 + } + #[doc = "Master automatic SUSP in Receive mode"] + pub fn set_masrx(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); + } + #[doc = "Master transfer start"] + pub const fn cstart(&self) -> bool { + let val = (self.0 >> 9usize) & 0x01; + val != 0 + } + #[doc = "Master transfer start"] + pub fn set_cstart(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); + } + #[doc = "Master SUSPend request"] + pub const fn csusp(&self) -> bool { + let val = (self.0 >> 10usize) & 0x01; + val != 0 + } + #[doc = "Master SUSPend request"] + pub fn set_csusp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); + } + #[doc = "Rx/Tx direction at Half-duplex mode"] + pub const fn hddir(&self) -> super::vals::Hddir { + let val = (self.0 >> 11usize) & 0x01; + super::vals::Hddir(val as u8) + } + #[doc = "Rx/Tx direction at Half-duplex mode"] + pub fn set_hddir(&mut self, val: super::vals::Hddir) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); + } + #[doc = "Internal SS signal input level"] + pub const fn ssi(&self) -> bool { + let val = (self.0 >> 12usize) & 0x01; + val != 0 + } + #[doc = "Internal SS signal input level"] + pub fn set_ssi(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); } - #[doc = "Prescaler value"] - pub fn set_psc(&mut self, val: u8) { - self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize); + #[doc = "32-bit CRC polynomial configuration"] + pub const fn crc33_17(&self) -> super::vals::Crc { + let val = (self.0 >> 13usize) & 0x01; + super::vals::Crc(val as u8) } - #[doc = "Guard time value"] - pub const fn gt(&self) -> u8 { - let val = (self.0 >> 8usize) & 0xff; - val as u8 + #[doc = "32-bit CRC polynomial configuration"] + pub fn set_crc33_17(&mut self, val: super::vals::Crc) { + self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize); } - #[doc = "Guard time value"] - pub fn set_gt(&mut self, val: u8) { - self.0 = (self.0 & !(0xff << 8usize)) | (((val as u32) & 0xff) << 8usize); + #[doc = "CRC calculation initialization pattern control for receiver"] + pub const fn rcrcini(&self) -> super::vals::Rcrcini { + let val = (self.0 >> 14usize) & 0x01; + super::vals::Rcrcini(val as u8) } - } - impl Default for Gtpr { - fn default() -> Gtpr { - Gtpr(0) + #[doc = "CRC calculation initialization pattern control for receiver"] + pub fn set_rcrcini(&mut self, val: super::vals::Rcrcini) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize); } - } - #[doc = "Receiver timeout register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Rtor(pub u32); - impl Rtor { - #[doc = "Receiver timeout value"] - pub const fn rto(&self) -> u32 { - let val = (self.0 >> 0usize) & 0x00ff_ffff; - val as u32 + #[doc = "CRC calculation initialization pattern control for transmitter"] + pub const fn tcrcini(&self) -> super::vals::Tcrcini { + let val = (self.0 >> 15usize) & 0x01; + super::vals::Tcrcini(val as u8) } - #[doc = "Receiver timeout value"] - pub fn set_rto(&mut self, val: u32) { - self.0 = - (self.0 & !(0x00ff_ffff << 0usize)) | (((val as u32) & 0x00ff_ffff) << 0usize); + #[doc = "CRC calculation initialization pattern control for transmitter"] + pub fn set_tcrcini(&mut self, val: super::vals::Tcrcini) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); } - #[doc = "Block Length"] - pub const fn blen(&self) -> u8 { - let val = (self.0 >> 24usize) & 0xff; - val as u8 + #[doc = "Locking the AF configuration of associated IOs"] + pub const fn iolock(&self) -> bool { + let val = (self.0 >> 16usize) & 0x01; + val != 0 } - #[doc = "Block Length"] - pub fn set_blen(&mut self, val: u8) { - self.0 = (self.0 & !(0xff << 24usize)) | (((val as u32) & 0xff) << 24usize); + #[doc = "Locking the AF configuration of associated IOs"] + pub fn set_iolock(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); } } - impl Default for Rtor { - fn default() -> Rtor { - Rtor(0) + impl Default for Cr1 { + fn default() -> Cr1 { + Cr1(0) } } - #[doc = "Control register 1"] + #[doc = "Interrupt/Status Flags Clear Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr1(pub u32); - impl Cr1 { - #[doc = "USART enable"] - pub const fn ue(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; - val != 0 - } - #[doc = "USART enable"] - pub fn set_ue(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); - } - #[doc = "USART enable in Stop mode"] - pub const fn uesm(&self) -> bool { - let val = (self.0 >> 1usize) & 0x01; - val != 0 - } - #[doc = "USART enable in Stop mode"] - pub fn set_uesm(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); - } - #[doc = "Receiver enable"] - pub const fn re(&self) -> bool { - let val = (self.0 >> 2usize) & 0x01; - val != 0 - } - #[doc = "Receiver enable"] - pub fn set_re(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); - } - #[doc = "Transmitter enable"] - pub const fn te(&self) -> bool { + pub struct Ifcr(pub u32); + impl Ifcr { + #[doc = "End Of Transfer flag clear"] + pub const fn eotc(&self) -> bool { let val = (self.0 >> 3usize) & 0x01; val != 0 } - #[doc = "Transmitter enable"] - pub fn set_te(&mut self, val: bool) { + #[doc = "End Of Transfer flag clear"] + pub fn set_eotc(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); } - #[doc = "IDLE interrupt enable"] - pub const fn idleie(&self) -> bool { + #[doc = "Transmission Transfer Filled flag clear"] + pub const fn txtfc(&self) -> bool { let val = (self.0 >> 4usize) & 0x01; val != 0 } - #[doc = "IDLE interrupt enable"] - pub fn set_idleie(&mut self, val: bool) { + #[doc = "Transmission Transfer Filled flag clear"] + pub fn set_txtfc(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); } - #[doc = "RXNE interrupt enable"] - pub const fn rxneie(&self) -> bool { + #[doc = "Underrun flag clear"] + pub const fn udrc(&self) -> bool { let val = (self.0 >> 5usize) & 0x01; val != 0 } - #[doc = "RXNE interrupt enable"] - pub fn set_rxneie(&mut self, val: bool) { + #[doc = "Underrun flag clear"] + pub fn set_udrc(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); } - #[doc = "Transmission complete interrupt enable"] - pub const fn tcie(&self) -> bool { + #[doc = "Overrun flag clear"] + pub const fn ovrc(&self) -> bool { let val = (self.0 >> 6usize) & 0x01; val != 0 } - #[doc = "Transmission complete interrupt enable"] - pub fn set_tcie(&mut self, val: bool) { + #[doc = "Overrun flag clear"] + pub fn set_ovrc(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - #[doc = "interrupt enable"] - pub const fn txeie(&self) -> bool { + #[doc = "CRC Error flag clear"] + pub const fn crcec(&self) -> bool { let val = (self.0 >> 7usize) & 0x01; val != 0 } - #[doc = "interrupt enable"] - pub fn set_txeie(&mut self, val: bool) { + #[doc = "CRC Error flag clear"] + pub fn set_crcec(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); } - #[doc = "PE interrupt enable"] - pub const fn peie(&self) -> bool { + #[doc = "TI frame format error flag clear"] + pub const fn tifrec(&self) -> bool { let val = (self.0 >> 8usize) & 0x01; val != 0 } - #[doc = "PE interrupt enable"] - pub fn set_peie(&mut self, val: bool) { + #[doc = "TI frame format error flag clear"] + pub fn set_tifrec(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); } - #[doc = "Parity selection"] - pub const fn ps(&self) -> super::vals::Ps { + #[doc = "Mode Fault flag clear"] + pub const fn modfc(&self) -> bool { let val = (self.0 >> 9usize) & 0x01; - super::vals::Ps(val as u8) + val != 0 } - #[doc = "Parity selection"] - pub fn set_ps(&mut self, val: super::vals::Ps) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + #[doc = "Mode Fault flag clear"] + pub fn set_modfc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); } - #[doc = "Parity control enable"] - pub const fn pce(&self) -> bool { + #[doc = "TSERFC flag clear"] + pub const fn tserfc(&self) -> bool { let val = (self.0 >> 10usize) & 0x01; val != 0 } - #[doc = "Parity control enable"] - pub fn set_pce(&mut self, val: bool) { + #[doc = "TSERFC flag clear"] + pub fn set_tserfc(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); } - #[doc = "Receiver wakeup method"] - pub const fn wake(&self) -> bool { + #[doc = "SUSPend flag clear"] + pub const fn suspc(&self) -> bool { let val = (self.0 >> 11usize) & 0x01; val != 0 } - #[doc = "Receiver wakeup method"] - pub fn set_wake(&mut self, val: bool) { + #[doc = "SUSPend flag clear"] + pub fn set_suspc(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); } - #[doc = "Word length"] - pub const fn m0(&self) -> super::vals::M0 { - let val = (self.0 >> 12usize) & 0x01; - super::vals::M0(val as u8) - } - #[doc = "Word length"] - pub fn set_m0(&mut self, val: super::vals::M0) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); - } - #[doc = "Word length"] - pub const fn m1(&self) -> super::vals::M1 { - let val = (self.0 >> 12usize) & 0x01; - super::vals::M1(val as u8) - } - #[doc = "Word length"] - pub fn set_m1(&mut self, val: super::vals::M1) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); - } - #[doc = "Mute mode enable"] - pub const fn mme(&self) -> bool { - let val = (self.0 >> 13usize) & 0x01; - val != 0 - } - #[doc = "Mute mode enable"] - pub fn set_mme(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); - } - #[doc = "Character match interrupt enable"] - pub const fn cmie(&self) -> bool { - let val = (self.0 >> 14usize) & 0x01; - val != 0 - } - #[doc = "Character match interrupt enable"] - pub fn set_cmie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); - } - #[doc = "Oversampling mode"] - pub fn over(&self, n: usize) -> super::vals::Over { - assert!(n < 1usize); - let offs = 15usize + n * 0usize; - let val = (self.0 >> offs) & 0x01; - super::vals::Over(val as u8) - } - #[doc = "Oversampling mode"] - pub fn set_over(&mut self, n: usize, val: super::vals::Over) { - assert!(n < 1usize); - let offs = 15usize + n * 0usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); - } - #[doc = "Driver Enable deassertion time"] - pub const fn dedt(&self) -> u8 { - let val = (self.0 >> 16usize) & 0x1f; - val as u8 - } - #[doc = "Driver Enable deassertion time"] - pub fn set_dedt(&mut self, val: u8) { - self.0 = (self.0 & !(0x1f << 16usize)) | (((val as u32) & 0x1f) << 16usize); - } - #[doc = "Driver Enable assertion time"] - pub const fn deat(&self) -> u8 { - let val = (self.0 >> 21usize) & 0x1f; - val as u8 - } - #[doc = "Driver Enable assertion time"] - pub fn set_deat(&mut self, val: u8) { - self.0 = (self.0 & !(0x1f << 21usize)) | (((val as u32) & 0x1f) << 21usize); - } - #[doc = "Receiver timeout interrupt enable"] - pub const fn rtoie(&self) -> bool { - let val = (self.0 >> 26usize) & 0x01; - val != 0 - } - #[doc = "Receiver timeout interrupt enable"] - pub fn set_rtoie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); + } + impl Default for Ifcr { + fn default() -> Ifcr { + Ifcr(0) } - #[doc = "End of Block interrupt enable"] - pub const fn eobie(&self) -> bool { - let val = (self.0 >> 27usize) & 0x01; - val != 0 + } + #[doc = "Receiver CRC Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Rxcrc(pub u32); + impl Rxcrc { + #[doc = "CRC register for receiver"] + pub const fn rxcrc(&self) -> u32 { + let val = (self.0 >> 0usize) & 0xffff_ffff; + val as u32 } - #[doc = "End of Block interrupt enable"] - pub fn set_eobie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize); + #[doc = "CRC register for receiver"] + pub fn set_rxcrc(&mut self, val: u32) { + self.0 = + (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); } } - impl Default for Cr1 { - fn default() -> Cr1 { - Cr1(0) + impl Default for Rxcrc { + fn default() -> Rxcrc { + Rxcrc(0) } } - #[doc = "Control register 3"] + #[doc = "Interrupt Enable Register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr3(pub u32); - impl Cr3 { - #[doc = "Error interrupt enable"] - pub const fn eie(&self) -> bool { + pub struct Ier(pub u32); + impl Ier { + #[doc = "RXP Interrupt Enable"] + pub const fn rxpie(&self) -> bool { let val = (self.0 >> 0usize) & 0x01; val != 0 } - #[doc = "Error interrupt enable"] - pub fn set_eie(&mut self, val: bool) { + #[doc = "RXP Interrupt Enable"] + pub fn set_rxpie(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "IrDA mode enable"] - pub const fn iren(&self) -> bool { + #[doc = "TXP interrupt enable"] + pub const fn txpie(&self) -> bool { let val = (self.0 >> 1usize) & 0x01; val != 0 } - #[doc = "IrDA mode enable"] - pub fn set_iren(&mut self, val: bool) { + #[doc = "TXP interrupt enable"] + pub fn set_txpie(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - #[doc = "IrDA low-power"] - pub const fn irlp(&self) -> super::vals::Irlp { + #[doc = "DXP interrupt enabled"] + pub const fn dxpie(&self) -> bool { let val = (self.0 >> 2usize) & 0x01; - super::vals::Irlp(val as u8) + val != 0 } - #[doc = "IrDA low-power"] - pub fn set_irlp(&mut self, val: super::vals::Irlp) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); + #[doc = "DXP interrupt enabled"] + pub fn set_dxpie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); } - #[doc = "Half-duplex selection"] - pub const fn hdsel(&self) -> super::vals::Hdsel { + #[doc = "EOT, SUSP and TXC interrupt enable"] + pub const fn eotie(&self) -> bool { let val = (self.0 >> 3usize) & 0x01; - super::vals::Hdsel(val as u8) + val != 0 } - #[doc = "Half-duplex selection"] - pub fn set_hdsel(&mut self, val: super::vals::Hdsel) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); + #[doc = "EOT, SUSP and TXC interrupt enable"] + pub fn set_eotie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); } - #[doc = "Smartcard NACK enable"] - pub const fn nack(&self) -> bool { + #[doc = "TXTFIE interrupt enable"] + pub const fn txtfie(&self) -> bool { let val = (self.0 >> 4usize) & 0x01; val != 0 } - #[doc = "Smartcard NACK enable"] - pub fn set_nack(&mut self, val: bool) { + #[doc = "TXTFIE interrupt enable"] + pub fn set_txtfie(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); } - #[doc = "Smartcard mode enable"] - pub const fn scen(&self) -> bool { + #[doc = "UDR interrupt enable"] + pub const fn udrie(&self) -> bool { let val = (self.0 >> 5usize) & 0x01; val != 0 } - #[doc = "Smartcard mode enable"] - pub fn set_scen(&mut self, val: bool) { + #[doc = "UDR interrupt enable"] + pub fn set_udrie(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); } - #[doc = "DMA enable receiver"] - pub const fn dmar(&self) -> bool { + #[doc = "OVR interrupt enable"] + pub const fn ovrie(&self) -> bool { let val = (self.0 >> 6usize) & 0x01; val != 0 } - #[doc = "DMA enable receiver"] - pub fn set_dmar(&mut self, val: bool) { + #[doc = "OVR interrupt enable"] + pub fn set_ovrie(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - #[doc = "DMA enable transmitter"] - pub const fn dmat(&self) -> bool { + #[doc = "CRC Interrupt enable"] + pub const fn crceie(&self) -> bool { let val = (self.0 >> 7usize) & 0x01; val != 0 } - #[doc = "DMA enable transmitter"] - pub fn set_dmat(&mut self, val: bool) { + #[doc = "CRC Interrupt enable"] + pub fn set_crceie(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); } - #[doc = "RTS enable"] - pub const fn rtse(&self) -> bool { + #[doc = "TIFRE interrupt enable"] + pub const fn tifreie(&self) -> bool { let val = (self.0 >> 8usize) & 0x01; val != 0 } - #[doc = "RTS enable"] - pub fn set_rtse(&mut self, val: bool) { + #[doc = "TIFRE interrupt enable"] + pub fn set_tifreie(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); } - #[doc = "CTS enable"] - pub const fn ctse(&self) -> bool { + #[doc = "Mode Fault interrupt enable"] + pub const fn modfie(&self) -> bool { let val = (self.0 >> 9usize) & 0x01; val != 0 } - #[doc = "CTS enable"] - pub fn set_ctse(&mut self, val: bool) { + #[doc = "Mode Fault interrupt enable"] + pub fn set_modfie(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); } - #[doc = "CTS interrupt enable"] - pub const fn ctsie(&self) -> bool { + #[doc = "Additional number of transactions reload interrupt enable"] + pub const fn tserfie(&self) -> bool { let val = (self.0 >> 10usize) & 0x01; val != 0 } - #[doc = "CTS interrupt enable"] - pub fn set_ctsie(&mut self, val: bool) { + #[doc = "Additional number of transactions reload interrupt enable"] + pub fn set_tserfie(&mut self, val: bool) { self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); } - #[doc = "One sample bit method enable"] - pub const fn onebit(&self) -> super::vals::Onebit { - let val = (self.0 >> 11usize) & 0x01; - super::vals::Onebit(val as u8) + } + impl Default for Ier { + fn default() -> Ier { + Ier(0) } - #[doc = "One sample bit method enable"] - pub fn set_onebit(&mut self, val: super::vals::Onebit) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize); + } + #[doc = "Transmitter CRC Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Txcrc(pub u32); + impl Txcrc { + #[doc = "CRC register for transmitter"] + pub const fn txcrc(&self) -> u32 { + let val = (self.0 >> 0usize) & 0xffff_ffff; + val as u32 } - #[doc = "Overrun Disable"] - pub const fn ovrdis(&self) -> super::vals::Ovrdis { - let val = (self.0 >> 12usize) & 0x01; - super::vals::Ovrdis(val as u8) + #[doc = "CRC register for transmitter"] + pub fn set_txcrc(&mut self, val: u32) { + self.0 = + (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); } - #[doc = "Overrun Disable"] - pub fn set_ovrdis(&mut self, val: super::vals::Ovrdis) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize); + } + impl Default for Txcrc { + fn default() -> Txcrc { + Txcrc(0) } - #[doc = "DMA Disable on Reception Error"] - pub const fn ddre(&self) -> bool { - let val = (self.0 >> 13usize) & 0x01; + } + #[doc = "configuration register 2"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Cfg2(pub u32); + impl Cfg2 { + #[doc = "Master SS Idleness"] + pub const fn mssi(&self) -> u8 { + let val = (self.0 >> 0usize) & 0x0f; + val as u8 + } + #[doc = "Master SS Idleness"] + pub fn set_mssi(&mut self, val: u8) { + self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize); + } + #[doc = "Master Inter-Data Idleness"] + pub const fn midi(&self) -> u8 { + let val = (self.0 >> 4usize) & 0x0f; + val as u8 + } + #[doc = "Master Inter-Data Idleness"] + pub fn set_midi(&mut self, val: u8) { + self.0 = (self.0 & !(0x0f << 4usize)) | (((val as u32) & 0x0f) << 4usize); + } + #[doc = "Swap functionality of MISO and MOSI pins"] + pub const fn ioswp(&self) -> bool { + let val = (self.0 >> 15usize) & 0x01; + val != 0 + } + #[doc = "Swap functionality of MISO and MOSI pins"] + pub fn set_ioswp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); + } + #[doc = "SPI Communication Mode"] + pub const fn comm(&self) -> super::vals::Comm { + let val = (self.0 >> 17usize) & 0x03; + super::vals::Comm(val as u8) + } + #[doc = "SPI Communication Mode"] + pub fn set_comm(&mut self, val: super::vals::Comm) { + self.0 = (self.0 & !(0x03 << 17usize)) | (((val.0 as u32) & 0x03) << 17usize); + } + #[doc = "Serial Protocol"] + pub const fn sp(&self) -> super::vals::Sp { + let val = (self.0 >> 19usize) & 0x07; + super::vals::Sp(val as u8) + } + #[doc = "Serial Protocol"] + pub fn set_sp(&mut self, val: super::vals::Sp) { + self.0 = (self.0 & !(0x07 << 19usize)) | (((val.0 as u32) & 0x07) << 19usize); + } + #[doc = "SPI Master"] + pub const fn master(&self) -> super::vals::Master { + let val = (self.0 >> 22usize) & 0x01; + super::vals::Master(val as u8) + } + #[doc = "SPI Master"] + pub fn set_master(&mut self, val: super::vals::Master) { + self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize); + } + #[doc = "Data frame format"] + pub const fn lsbfrst(&self) -> super::vals::Lsbfrst { + let val = (self.0 >> 23usize) & 0x01; + super::vals::Lsbfrst(val as u8) + } + #[doc = "Data frame format"] + pub fn set_lsbfrst(&mut self, val: super::vals::Lsbfrst) { + self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize); + } + #[doc = "Clock phase"] + pub const fn cpha(&self) -> super::vals::Cpha { + let val = (self.0 >> 24usize) & 0x01; + super::vals::Cpha(val as u8) + } + #[doc = "Clock phase"] + pub fn set_cpha(&mut self, val: super::vals::Cpha) { + self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize); + } + #[doc = "Clock polarity"] + pub const fn cpol(&self) -> super::vals::Cpol { + let val = (self.0 >> 25usize) & 0x01; + super::vals::Cpol(val as u8) + } + #[doc = "Clock polarity"] + pub fn set_cpol(&mut self, val: super::vals::Cpol) { + self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize); + } + #[doc = "Software management of SS signal input"] + pub const fn ssm(&self) -> bool { + let val = (self.0 >> 26usize) & 0x01; val != 0 } - #[doc = "DMA Disable on Reception Error"] - pub fn set_ddre(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); + #[doc = "Software management of SS signal input"] + pub fn set_ssm(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize); } - #[doc = "Driver enable mode"] - pub const fn dem(&self) -> bool { - let val = (self.0 >> 14usize) & 0x01; + #[doc = "SS input/output polarity"] + pub const fn ssiop(&self) -> super::vals::Ssiop { + let val = (self.0 >> 28usize) & 0x01; + super::vals::Ssiop(val as u8) + } + #[doc = "SS input/output polarity"] + pub fn set_ssiop(&mut self, val: super::vals::Ssiop) { + self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize); + } + #[doc = "SS output enable"] + pub const fn ssoe(&self) -> bool { + let val = (self.0 >> 29usize) & 0x01; val != 0 } - #[doc = "Driver enable mode"] - pub fn set_dem(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); + #[doc = "SS output enable"] + pub fn set_ssoe(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 29usize)) | (((val as u32) & 0x01) << 29usize); } - #[doc = "Driver enable polarity selection"] - pub const fn dep(&self) -> super::vals::Dep { - let val = (self.0 >> 15usize) & 0x01; - super::vals::Dep(val as u8) + #[doc = "SS output management in master mode"] + pub const fn ssom(&self) -> super::vals::Ssom { + let val = (self.0 >> 30usize) & 0x01; + super::vals::Ssom(val as u8) } - #[doc = "Driver enable polarity selection"] - pub fn set_dep(&mut self, val: super::vals::Dep) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + #[doc = "SS output management in master mode"] + pub fn set_ssom(&mut self, val: super::vals::Ssom) { + self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize); } - #[doc = "Smartcard auto-retry count"] - pub const fn scarcnt(&self) -> u8 { - let val = (self.0 >> 17usize) & 0x07; - val as u8 + #[doc = "Alternate function GPIOs control"] + pub const fn afcntr(&self) -> super::vals::Afcntr { + let val = (self.0 >> 31usize) & 0x01; + super::vals::Afcntr(val as u8) } - #[doc = "Smartcard auto-retry count"] - pub fn set_scarcnt(&mut self, val: u8) { - self.0 = (self.0 & !(0x07 << 17usize)) | (((val as u32) & 0x07) << 17usize); + #[doc = "Alternate function GPIOs control"] + pub fn set_afcntr(&mut self, val: super::vals::Afcntr) { + self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize); } - #[doc = "Wakeup from Stop mode interrupt flag selection"] - pub const fn wus(&self) -> super::vals::Wus { - let val = (self.0 >> 20usize) & 0x03; - super::vals::Wus(val as u8) + } + impl Default for Cfg2 { + fn default() -> Cfg2 { + Cfg2(0) } - #[doc = "Wakeup from Stop mode interrupt flag selection"] - pub fn set_wus(&mut self, val: super::vals::Wus) { - self.0 = (self.0 & !(0x03 << 20usize)) | (((val.0 as u32) & 0x03) << 20usize); + } + #[doc = "Receive Data Register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Rxdr(pub u32); + impl Rxdr { + #[doc = "Receive data register"] + pub const fn rxdr(&self) -> u32 { + let val = (self.0 >> 0usize) & 0xffff_ffff; + val as u32 } - #[doc = "Wakeup from Stop mode interrupt enable"] - pub const fn wufie(&self) -> bool { - let val = (self.0 >> 22usize) & 0x01; - val != 0 + #[doc = "Receive data register"] + pub fn set_rxdr(&mut self, val: u32) { + self.0 = + (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize); } - #[doc = "Wakeup from Stop mode interrupt enable"] - pub fn set_wufie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); + } + impl Default for Rxdr { + fn default() -> Rxdr { + Rxdr(0) } } - impl Default for Cr3 { - fn default() -> Cr3 { - Cr3(0) - } + } + pub mod vals { + use crate::generic::*; + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Rxwne(pub u8); + impl Rxwne { + #[doc = "Less than 32-bit data frame received"] + pub const LESSTHAN32: Self = Self(0); + #[doc = "At least 32-bit data frame received"] + pub const ATLEAST32: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Ssom(pub u8); + impl Ssom { + #[doc = "SS is asserted until data transfer complete"] + pub const ASSERTED: Self = Self(0); + #[doc = "Data frames interleaved with SS not asserted during MIDI"] + pub const NOTASSERTED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Afcntr(pub u8); + impl Afcntr { + #[doc = "Peripheral takes no control of GPIOs while disabled"] + pub const NOTCONTROLLED: Self = Self(0); + #[doc = "Peripheral controls GPIOs while disabled"] + pub const CONTROLLED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Udrcfg(pub u8); + impl Udrcfg { + #[doc = "Slave sends a constant underrun pattern"] + pub const CONSTANT: Self = Self(0); + #[doc = "Slave repeats last received data frame from master"] + pub const REPEATRECEIVED: Self = Self(0x01); + #[doc = "Slave repeats last transmitted data frame"] + pub const REPEATTRANSMITTED: Self = Self(0x02); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Cpol(pub u8); + impl Cpol { + #[doc = "CK to 0 when idle"] + pub const IDLELOW: Self = Self(0); + #[doc = "CK to 1 when idle"] + pub const IDLEHIGH: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Lsbfrst(pub u8); + impl Lsbfrst { + #[doc = "Data is transmitted/received with the MSB first"] + pub const MSBFIRST: Self = Self(0); + #[doc = "Data is transmitted/received with the LSB first"] + pub const LSBFIRST: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Fthlv(pub u8); + impl Fthlv { + #[doc = "1 frame"] + pub const ONEFRAME: Self = Self(0); + #[doc = "2 frames"] + pub const TWOFRAMES: Self = Self(0x01); + #[doc = "3 frames"] + pub const THREEFRAMES: Self = Self(0x02); + #[doc = "4 frames"] + pub const FOURFRAMES: Self = Self(0x03); + #[doc = "5 frames"] + pub const FIVEFRAMES: Self = Self(0x04); + #[doc = "6 frames"] + pub const SIXFRAMES: Self = Self(0x05); + #[doc = "7 frames"] + pub const SEVENFRAMES: Self = Self(0x06); + #[doc = "8 frames"] + pub const EIGHTFRAMES: Self = Self(0x07); + #[doc = "9 frames"] + pub const NINEFRAMES: Self = Self(0x08); + #[doc = "10 frames"] + pub const TENFRAMES: Self = Self(0x09); + #[doc = "11 frames"] + pub const ELEVENFRAMES: Self = Self(0x0a); + #[doc = "12 frames"] + pub const TWELVEFRAMES: Self = Self(0x0b); + #[doc = "13 frames"] + pub const THIRTEENFRAMES: Self = Self(0x0c); + #[doc = "14 frames"] + pub const FOURTEENFRAMES: Self = Self(0x0d); + #[doc = "15 frames"] + pub const FIFTEENFRAMES: Self = Self(0x0e); + #[doc = "16 frames"] + pub const SIXTEENFRAMES: Self = Self(0x0f); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Mbr(pub u8); + impl Mbr { + #[doc = "f_spi_ker_ck / 2"] + pub const DIV2: Self = Self(0); + #[doc = "f_spi_ker_ck / 4"] + pub const DIV4: Self = Self(0x01); + #[doc = "f_spi_ker_ck / 8"] + pub const DIV8: Self = Self(0x02); + #[doc = "f_spi_ker_ck / 16"] + pub const DIV16: Self = Self(0x03); + #[doc = "f_spi_ker_ck / 32"] + pub const DIV32: Self = Self(0x04); + #[doc = "f_spi_ker_ck / 64"] + pub const DIV64: Self = Self(0x05); + #[doc = "f_spi_ker_ck / 128"] + pub const DIV128: Self = Self(0x06); + #[doc = "f_spi_ker_ck / 256"] + pub const DIV256: Self = Self(0x07); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Rcrcini(pub u8); + impl Rcrcini { + #[doc = "All zeros RX CRC initialization pattern"] + pub const ALLZEROS: Self = Self(0); + #[doc = "All ones RX CRC initialization pattern"] + pub const ALLONES: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Ssiop(pub u8); + impl Ssiop { + #[doc = "Low level is active for SS signal"] + pub const ACTIVELOW: Self = Self(0); + #[doc = "High level is active for SS signal"] + pub const ACTIVEHIGH: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Hddir(pub u8); + impl Hddir { + #[doc = "Receiver in half duplex mode"] + pub const RECEIVER: Self = Self(0); + #[doc = "Transmitter in half duplex mode"] + pub const TRANSMITTER: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Udrdet(pub u8); + impl Udrdet { + #[doc = "Underrun is detected at begin of data frame"] + pub const STARTOFFRAME: Self = Self(0); + #[doc = "Underrun is detected at end of last data frame"] + pub const ENDOFFRAME: Self = Self(0x01); + #[doc = "Underrun is detected at begin of active SS signal"] + pub const STARTOFSLAVESELECT: Self = Self(0x02); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Datlen(pub u8); + impl Datlen { + #[doc = "16 bit data length"] + pub const BITS16: Self = Self(0); + #[doc = "24 bit data length"] + pub const BITS24: Self = Self(0x01); + #[doc = "32 bit data length"] + pub const BITS32: Self = Self(0x02); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Crc(pub u8); + impl Crc { + #[doc = "Full size (33/17 bit) CRC polynomial is not used"] + pub const DISABLED: Self = Self(0); + #[doc = "Full size (33/17 bit) CRC polynomial is used"] + pub const ENABLED: Self = Self(0x01); } - #[doc = "Interrupt & status register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Rxplvl(pub u8); + impl Rxplvl { + #[doc = "Zero frames beyond packing ratio available"] + pub const ZEROFRAMES: Self = Self(0); + #[doc = "One frame beyond packing ratio available"] + pub const ONEFRAME: Self = Self(0x01); + #[doc = "Two frame beyond packing ratio available"] + pub const TWOFRAMES: Self = Self(0x02); + #[doc = "Three frame beyond packing ratio available"] + pub const THREEFRAMES: Self = Self(0x03); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Master(pub u8); + impl Master { + #[doc = "Slave configuration"] + pub const SLAVE: Self = Self(0); + #[doc = "Master configuration"] + pub const MASTER: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Datfmt(pub u8); + impl Datfmt { + #[doc = "The data inside RXDR and TXDR are right aligned"] + pub const RIGHTALIGNED: Self = Self(0); + #[doc = "The data inside RXDR and TXDR are left aligned"] + pub const LEFTALIGNED: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Comm(pub u8); + impl Comm { + #[doc = "Full duplex"] + pub const FULLDUPLEX: Self = Self(0); + #[doc = "Simplex transmitter only"] + pub const TRANSMITTER: Self = Self(0x01); + #[doc = "Simplex receiver only"] + pub const RECEIVER: Self = Self(0x02); + #[doc = "Half duplex"] + pub const HALFDUPLEX: Self = Self(0x03); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Cpha(pub u8); + impl Cpha { + #[doc = "The first clock transition is the first data capture edge"] + pub const FIRSTEDGE: Self = Self(0); + #[doc = "The second clock transition is the first data capture edge"] + pub const SECONDEDGE: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Tcrcini(pub u8); + impl Tcrcini { + #[doc = "All zeros TX CRC initialization pattern"] + pub const ALLZEROS: Self = Self(0); + #[doc = "All ones TX CRC initialization pattern"] + pub const ALLONES: Self = Self(0x01); + } + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)] + pub struct Sp(pub u8); + impl Sp { + #[doc = "Motorola SPI protocol"] + pub const MOTOROLA: Self = Self(0); + #[doc = "TI SPI protocol"] + pub const TI: Self = Self(0x01); + } + } +} +pub mod rng_v1 { + use crate::generic::*; + #[doc = "Random number generator"] + #[derive(Copy, Clone)] + pub struct Rng(pub *mut u8); + unsafe impl Send for Rng {} + unsafe impl Sync for Rng {} + impl Rng { + #[doc = "control register"] + pub fn cr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(0usize)) } + } + #[doc = "status register"] + pub fn sr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(4usize)) } + } + #[doc = "data register"] + pub fn dr(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(8usize)) } + } + } + pub mod regs { + use crate::generic::*; + #[doc = "status register"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Ixr(pub u32); - impl Ixr { - #[doc = "Parity error"] - pub const fn pe(&self) -> bool { - let val = (self.0 >> 0usize) & 0x01; - val != 0 - } - #[doc = "Parity error"] - pub fn set_pe(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); - } - #[doc = "Framing error"] - pub const fn fe(&self) -> bool { - let val = (self.0 >> 1usize) & 0x01; - val != 0 - } - #[doc = "Framing error"] - pub fn set_fe(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); - } - #[doc = "Noise detected flag"] - pub const fn nf(&self) -> bool { - let val = (self.0 >> 2usize) & 0x01; - val != 0 - } - #[doc = "Noise detected flag"] - pub fn set_nf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); - } - #[doc = "Overrun error"] - pub const fn ore(&self) -> bool { - let val = (self.0 >> 3usize) & 0x01; - val != 0 - } - #[doc = "Overrun error"] - pub fn set_ore(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); - } - #[doc = "Idle line detected"] - pub const fn idle(&self) -> bool { - let val = (self.0 >> 4usize) & 0x01; - val != 0 - } - #[doc = "Idle line detected"] - pub fn set_idle(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize); - } - #[doc = "Read data register not empty"] - pub const fn rxne(&self) -> bool { - let val = (self.0 >> 5usize) & 0x01; - val != 0 - } - #[doc = "Read data register not empty"] - pub fn set_rxne(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); - } - #[doc = "Transmission complete"] - pub const fn tc(&self) -> bool { - let val = (self.0 >> 6usize) & 0x01; - val != 0 - } - #[doc = "Transmission complete"] - pub fn set_tc(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); - } - #[doc = "Transmit data register empty"] - pub const fn txe(&self) -> bool { - let val = (self.0 >> 7usize) & 0x01; - val != 0 - } - #[doc = "Transmit data register empty"] - pub fn set_txe(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize); - } - #[doc = "LIN break detection flag"] - pub const fn lbdf(&self) -> bool { - let val = (self.0 >> 8usize) & 0x01; - val != 0 - } - #[doc = "LIN break detection flag"] - pub fn set_lbdf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); - } - #[doc = "CTS interrupt flag"] - pub const fn ctsif(&self) -> bool { - let val = (self.0 >> 9usize) & 0x01; - val != 0 - } - #[doc = "CTS interrupt flag"] - pub fn set_ctsif(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); - } - #[doc = "CTS flag"] - pub const fn cts(&self) -> bool { - let val = (self.0 >> 10usize) & 0x01; - val != 0 - } - #[doc = "CTS flag"] - pub fn set_cts(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); - } - #[doc = "Receiver timeout"] - pub const fn rtof(&self) -> bool { - let val = (self.0 >> 11usize) & 0x01; - val != 0 - } - #[doc = "Receiver timeout"] - pub fn set_rtof(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); - } - #[doc = "End of block flag"] - pub const fn eobf(&self) -> bool { - let val = (self.0 >> 12usize) & 0x01; - val != 0 - } - #[doc = "End of block flag"] - pub fn set_eobf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); - } - #[doc = "Auto baud rate error"] - pub const fn abre(&self) -> bool { - let val = (self.0 >> 14usize) & 0x01; - val != 0 - } - #[doc = "Auto baud rate error"] - pub fn set_abre(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); - } - #[doc = "Auto baud rate flag"] - pub const fn abrf(&self) -> bool { - let val = (self.0 >> 15usize) & 0x01; - val != 0 - } - #[doc = "Auto baud rate flag"] - pub fn set_abrf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize); - } - #[doc = "Busy flag"] - pub const fn busy(&self) -> bool { - let val = (self.0 >> 16usize) & 0x01; + pub struct Sr(pub u32); + impl Sr { + #[doc = "Data ready"] + pub const fn drdy(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; val != 0 } - #[doc = "Busy flag"] - pub fn set_busy(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize); + #[doc = "Data ready"] + pub fn set_drdy(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "character match flag"] - pub const fn cmf(&self) -> bool { - let val = (self.0 >> 17usize) & 0x01; + #[doc = "Clock error current status"] + pub const fn cecs(&self) -> bool { + let val = (self.0 >> 1usize) & 0x01; val != 0 } - #[doc = "character match flag"] - pub fn set_cmf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize); + #[doc = "Clock error current status"] + pub fn set_cecs(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize); } - #[doc = "Send break flag"] - pub const fn sbkf(&self) -> bool { - let val = (self.0 >> 18usize) & 0x01; + #[doc = "Seed error current status"] + pub const fn secs(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; val != 0 } - #[doc = "Send break flag"] - pub fn set_sbkf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize); + #[doc = "Seed error current status"] + pub fn set_secs(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); } - #[doc = "Receiver wakeup from Mute mode"] - pub const fn rwu(&self) -> bool { - let val = (self.0 >> 19usize) & 0x01; + #[doc = "Clock error interrupt status"] + pub const fn ceis(&self) -> bool { + let val = (self.0 >> 5usize) & 0x01; val != 0 } - #[doc = "Receiver wakeup from Mute mode"] - pub fn set_rwu(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize); + #[doc = "Clock error interrupt status"] + pub fn set_ceis(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize); } - #[doc = "Wakeup from Stop mode flag"] - pub const fn wuf(&self) -> bool { - let val = (self.0 >> 20usize) & 0x01; + #[doc = "Seed error interrupt status"] + pub const fn seis(&self) -> bool { + let val = (self.0 >> 6usize) & 0x01; val != 0 } - #[doc = "Wakeup from Stop mode flag"] - pub fn set_wuf(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize); + #[doc = "Seed error interrupt status"] + pub fn set_seis(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); } - #[doc = "Transmit enable acknowledge flag"] - pub const fn teack(&self) -> bool { - let val = (self.0 >> 21usize) & 0x01; + } + impl Default for Sr { + fn default() -> Sr { + Sr(0) + } + } + #[doc = "control register"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Cr(pub u32); + impl Cr { + #[doc = "Random number generator enable"] + pub const fn rngen(&self) -> bool { + let val = (self.0 >> 2usize) & 0x01; val != 0 } - #[doc = "Transmit enable acknowledge flag"] - pub fn set_teack(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize); + #[doc = "Random number generator enable"] + pub fn set_rngen(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize); } - #[doc = "Receive enable acknowledge flag"] - pub const fn reack(&self) -> bool { - let val = (self.0 >> 22usize) & 0x01; + #[doc = "Interrupt enable"] + pub const fn ie(&self) -> bool { + let val = (self.0 >> 3usize) & 0x01; val != 0 } - #[doc = "Receive enable acknowledge flag"] - pub fn set_reack(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize); + #[doc = "Interrupt enable"] + pub fn set_ie(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); } } - impl Default for Ixr { - fn default() -> Ixr { - Ixr(0) + impl Default for Cr { + fn default() -> Cr { + Cr(0) } } - #[doc = "Data register"] + } +} +pub mod syscfg_l0 { + use crate::generic::*; + #[doc = "System configuration controller"] + #[derive(Copy, Clone)] + pub struct Syscfg(pub *mut u8); + unsafe impl Send for Syscfg {} + unsafe impl Sync for Syscfg {} + impl Syscfg { + #[doc = "configuration register 1"] + pub fn cfgr1(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(0usize)) } + } + #[doc = "CFGR2"] + pub fn cfgr2(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(4usize)) } + } + #[doc = "external interrupt configuration register"] + pub fn exticr(self, n: usize) -> Reg { + assert!(n < 4usize); + unsafe { Reg::from_ptr(self.0.add(8usize + n * 4usize)) } + } + #[doc = "CFGR3"] + pub fn cfgr3(self) -> Reg { + unsafe { Reg::from_ptr(self.0.add(32usize)) } + } + } + pub mod regs { + use crate::generic::*; + #[doc = "external interrupt configuration register 1-4"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Dr(pub u32); - impl Dr { - #[doc = "data value"] - pub const fn dr(&self) -> u16 { - let val = (self.0 >> 0usize) & 0x01ff; - val as u16 + pub struct Exticr(pub u32); + impl Exticr { + #[doc = "EXTI configuration bits"] + pub fn exti(&self, n: usize) -> u8 { + assert!(n < 4usize); + let offs = 0usize + n * 4usize; + let val = (self.0 >> offs) & 0x0f; + val as u8 } - #[doc = "data value"] - pub fn set_dr(&mut self, val: u16) { - self.0 = (self.0 & !(0x01ff << 0usize)) | (((val as u32) & 0x01ff) << 0usize); + #[doc = "EXTI configuration bits"] + pub fn set_exti(&mut self, n: usize, val: u8) { + assert!(n < 4usize); + let offs = 0usize + n * 4usize; + self.0 = (self.0 & !(0x0f << offs)) | (((val as u32) & 0x0f) << offs); } } - impl Default for Dr { - fn default() -> Dr { - Dr(0) + impl Default for Exticr { + fn default() -> Exticr { + Exticr(0) } } - #[doc = "Request register"] + #[doc = "configuration register 1"] #[repr(transparent)] #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Rqr(pub u32); - impl Rqr { - #[doc = "Auto baud rate request"] - pub const fn abrrq(&self) -> super::vals::Abrrq { - let val = (self.0 >> 0usize) & 0x01; - super::vals::Abrrq(val as u8) - } - #[doc = "Auto baud rate request"] - pub fn set_abrrq(&mut self, val: super::vals::Abrrq) { - self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize); - } - #[doc = "Send break request"] - pub const fn sbkrq(&self) -> super::vals::Sbkrq { - let val = (self.0 >> 1usize) & 0x01; - super::vals::Sbkrq(val as u8) - } - #[doc = "Send break request"] - pub fn set_sbkrq(&mut self, val: super::vals::Sbkrq) { - self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize); - } - #[doc = "Mute mode request"] - pub const fn mmrq(&self) -> super::vals::Mmrq { - let val = (self.0 >> 2usize) & 0x01; - super::vals::Mmrq(val as u8) + pub struct Cfgr1(pub u32); + impl Cfgr1 { + #[doc = "Memory mapping selection bits"] + pub const fn mem_mode(&self) -> u8 { + let val = (self.0 >> 0usize) & 0x03; + val as u8 } - #[doc = "Mute mode request"] - pub fn set_mmrq(&mut self, val: super::vals::Mmrq) { - self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize); + #[doc = "Memory mapping selection bits"] + pub fn set_mem_mode(&mut self, val: u8) { + self.0 = (self.0 & !(0x03 << 0usize)) | (((val as u32) & 0x03) << 0usize); } - #[doc = "Receive data flush request"] - pub const fn rxfrq(&self) -> super::vals::Rxfrq { + #[doc = "User bank swapping"] + pub const fn ufb(&self) -> bool { let val = (self.0 >> 3usize) & 0x01; - super::vals::Rxfrq(val as u8) - } - #[doc = "Receive data flush request"] - pub fn set_rxfrq(&mut self, val: super::vals::Rxfrq) { - self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize); + val != 0 } - #[doc = "Transmit data flush request"] - pub const fn txfrq(&self) -> super::vals::Txfrq { - let val = (self.0 >> 4usize) & 0x01; - super::vals::Txfrq(val as u8) + #[doc = "User bank swapping"] + pub fn set_ufb(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize); } - #[doc = "Transmit data flush request"] - pub fn set_txfrq(&mut self, val: super::vals::Txfrq) { - self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize); + #[doc = "Boot mode selected by the boot pins status bits"] + pub const fn boot_mode(&self) -> u8 { + let val = (self.0 >> 8usize) & 0x03; + val as u8 } - } - impl Default for Rqr { - fn default() -> Rqr { - Rqr(0) + #[doc = "Boot mode selected by the boot pins status bits"] + pub fn set_boot_mode(&mut self, val: u8) { + self.0 = (self.0 & !(0x03 << 8usize)) | (((val as u32) & 0x03) << 8usize); } } - #[doc = "Control register 2"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Cr2(pub u32); - impl Cr2 { - #[doc = "7-bit Address Detection/4-bit Address Detection"] - pub fn addm(&self, n: usize) -> super::vals::Addm { - assert!(n < 1usize); - let offs = 4usize + n * 0usize; - let val = (self.0 >> offs) & 0x01; - super::vals::Addm(val as u8) - } - #[doc = "7-bit Address Detection/4-bit Address Detection"] - pub fn set_addm(&mut self, n: usize, val: super::vals::Addm) { - assert!(n < 1usize); - let offs = 4usize + n * 0usize; - self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs); - } - #[doc = "LIN break detection length"] - pub const fn lbdl(&self) -> super::vals::Lbdl { - let val = (self.0 >> 5usize) & 0x01; - super::vals::Lbdl(val as u8) - } - #[doc = "LIN break detection length"] - pub fn set_lbdl(&mut self, val: super::vals::Lbdl) { - self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize); + impl Default for Cfgr1 { + fn default() -> Cfgr1 { + Cfgr1(0) } - #[doc = "LIN break detection interrupt enable"] - pub const fn lbdie(&self) -> bool { - let val = (self.0 >> 6usize) & 0x01; + } + #[doc = "CFGR3"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Cfgr3(pub u32); + impl Cfgr3 { + #[doc = "VREFINT enable and scaler control for COMP2 enable bit"] + pub const fn en_vrefint(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; val != 0 } - #[doc = "LIN break detection interrupt enable"] - pub fn set_lbdie(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize); + #[doc = "VREFINT enable and scaler control for COMP2 enable bit"] + pub fn set_en_vrefint(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "Last bit clock pulse"] - pub const fn lbcl(&self) -> super::vals::Lbcl { - let val = (self.0 >> 8usize) & 0x01; - super::vals::Lbcl(val as u8) + #[doc = "VREFINT_ADC connection bit"] + pub const fn sel_vref_out(&self) -> u8 { + let val = (self.0 >> 4usize) & 0x03; + val as u8 } - #[doc = "Last bit clock pulse"] - pub fn set_lbcl(&mut self, val: super::vals::Lbcl) { - self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize); + #[doc = "VREFINT_ADC connection bit"] + pub fn set_sel_vref_out(&mut self, val: u8) { + self.0 = (self.0 & !(0x03 << 4usize)) | (((val as u32) & 0x03) << 4usize); } - #[doc = "Clock phase"] - pub const fn cpha(&self) -> super::vals::Cpha { - let val = (self.0 >> 9usize) & 0x01; - super::vals::Cpha(val as u8) + #[doc = "VREFINT reference for ADC enable bit"] + pub const fn enbuf_vrefint_adc(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 } - #[doc = "Clock phase"] - pub fn set_cpha(&mut self, val: super::vals::Cpha) { - self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize); + #[doc = "VREFINT reference for ADC enable bit"] + pub fn set_enbuf_vrefint_adc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); } - #[doc = "Clock polarity"] - pub const fn cpol(&self) -> super::vals::Cpol { - let val = (self.0 >> 10usize) & 0x01; - super::vals::Cpol(val as u8) + #[doc = "Temperature sensor reference for ADC enable bit"] + pub const fn enbuf_sensor_adc(&self) -> bool { + let val = (self.0 >> 9usize) & 0x01; + val != 0 } - #[doc = "Clock polarity"] - pub fn set_cpol(&mut self, val: super::vals::Cpol) { - self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize); + #[doc = "Temperature sensor reference for ADC enable bit"] + pub fn set_enbuf_sensor_adc(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); } - #[doc = "Clock enable"] - pub const fn clken(&self) -> bool { - let val = (self.0 >> 11usize) & 0x01; + #[doc = "VREFINT reference for COMP2 scaler enable bit"] + pub const fn enbuf_vrefint_comp2(&self) -> bool { + let val = (self.0 >> 12usize) & 0x01; val != 0 } - #[doc = "Clock enable"] - pub fn set_clken(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); + #[doc = "VREFINT reference for COMP2 scaler enable bit"] + pub fn set_enbuf_vrefint_comp2(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); } - #[doc = "STOP bits"] - pub const fn stop(&self) -> super::vals::Stop { - let val = (self.0 >> 12usize) & 0x03; - super::vals::Stop(val as u8) + #[doc = "VREFINT reference for HSI48 oscillator enable bit"] + pub const fn enref_hsi48(&self) -> bool { + let val = (self.0 >> 13usize) & 0x01; + val != 0 } - #[doc = "STOP bits"] - pub fn set_stop(&mut self, val: super::vals::Stop) { - self.0 = (self.0 & !(0x03 << 12usize)) | (((val.0 as u32) & 0x03) << 12usize); + #[doc = "VREFINT reference for HSI48 oscillator enable bit"] + pub fn set_enref_hsi48(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); } - #[doc = "LIN mode enable"] - pub const fn linen(&self) -> bool { - let val = (self.0 >> 14usize) & 0x01; + #[doc = "VREFINT ready flag"] + pub const fn vrefint_rdyf(&self) -> bool { + let val = (self.0 >> 30usize) & 0x01; val != 0 } - #[doc = "LIN mode enable"] - pub fn set_linen(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); - } - #[doc = "Swap TX/RX pins"] - pub const fn swap(&self) -> super::vals::Swap { - let val = (self.0 >> 15usize) & 0x01; - super::vals::Swap(val as u8) + #[doc = "VREFINT ready flag"] + pub fn set_vrefint_rdyf(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 30usize)) | (((val as u32) & 0x01) << 30usize); } - #[doc = "Swap TX/RX pins"] - pub fn set_swap(&mut self, val: super::vals::Swap) { - self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize); + #[doc = "SYSCFG_CFGR3 lock bit"] + pub const fn ref_lock(&self) -> bool { + let val = (self.0 >> 31usize) & 0x01; + val != 0 } - #[doc = "RX pin active level inversion"] - pub const fn rxinv(&self) -> super::vals::Rxinv { - let val = (self.0 >> 16usize) & 0x01; - super::vals::Rxinv(val as u8) + #[doc = "SYSCFG_CFGR3 lock bit"] + pub fn set_ref_lock(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize); } - #[doc = "RX pin active level inversion"] - pub fn set_rxinv(&mut self, val: super::vals::Rxinv) { - self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize); + } + impl Default for Cfgr3 { + fn default() -> Cfgr3 { + Cfgr3(0) } - #[doc = "TX pin active level inversion"] - pub const fn txinv(&self) -> super::vals::Txinv { - let val = (self.0 >> 17usize) & 0x01; - super::vals::Txinv(val as u8) + } + #[doc = "CFGR2"] + #[repr(transparent)] + #[derive(Copy, Clone, Eq, PartialEq)] + pub struct Cfgr2(pub u32); + impl Cfgr2 { + #[doc = "Firewall disable bit"] + pub const fn fwdis(&self) -> bool { + let val = (self.0 >> 0usize) & 0x01; + val != 0 } - #[doc = "TX pin active level inversion"] - pub fn set_txinv(&mut self, val: super::vals::Txinv) { - self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize); + #[doc = "Firewall disable bit"] + pub fn set_fwdis(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize); } - #[doc = "Binary data inversion"] - pub const fn datainv(&self) -> super::vals::Datainv { - let val = (self.0 >> 18usize) & 0x01; - super::vals::Datainv(val as u8) + #[doc = "Fm+ drive capability on PB6 enable bit"] + pub const fn i2c_pb6_fmp(&self) -> bool { + let val = (self.0 >> 8usize) & 0x01; + val != 0 } - #[doc = "Binary data inversion"] - pub fn set_datainv(&mut self, val: super::vals::Datainv) { - self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize); + #[doc = "Fm+ drive capability on PB6 enable bit"] + pub fn set_i2c_pb6_fmp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize); } - #[doc = "Most significant bit first"] - pub const fn msbfirst(&self) -> super::vals::Msbfirst { - let val = (self.0 >> 19usize) & 0x01; - super::vals::Msbfirst(val as u8) + #[doc = "Fm+ drive capability on PB7 enable bit"] + pub const fn i2c_pb7_fmp(&self) -> bool { + let val = (self.0 >> 9usize) & 0x01; + val != 0 } - #[doc = "Most significant bit first"] - pub fn set_msbfirst(&mut self, val: super::vals::Msbfirst) { - self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize); + #[doc = "Fm+ drive capability on PB7 enable bit"] + pub fn set_i2c_pb7_fmp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize); } - #[doc = "Auto baud rate enable"] - pub const fn abren(&self) -> bool { - let val = (self.0 >> 20usize) & 0x01; + #[doc = "Fm+ drive capability on PB8 enable bit"] + pub const fn i2c_pb8_fmp(&self) -> bool { + let val = (self.0 >> 10usize) & 0x01; val != 0 } - #[doc = "Auto baud rate enable"] - pub fn set_abren(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize); + #[doc = "Fm+ drive capability on PB8 enable bit"] + pub fn set_i2c_pb8_fmp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize); } - #[doc = "Auto baud rate mode"] - pub const fn abrmod(&self) -> super::vals::Abrmod { - let val = (self.0 >> 21usize) & 0x03; - super::vals::Abrmod(val as u8) + #[doc = "Fm+ drive capability on PB9 enable bit"] + pub const fn i2c_pb9_fmp(&self) -> bool { + let val = (self.0 >> 11usize) & 0x01; + val != 0 } - #[doc = "Auto baud rate mode"] - pub fn set_abrmod(&mut self, val: super::vals::Abrmod) { - self.0 = (self.0 & !(0x03 << 21usize)) | (((val.0 as u32) & 0x03) << 21usize); + #[doc = "Fm+ drive capability on PB9 enable bit"] + pub fn set_i2c_pb9_fmp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize); } - #[doc = "Receiver timeout enable"] - pub const fn rtoen(&self) -> bool { - let val = (self.0 >> 23usize) & 0x01; + #[doc = "I2C1 Fm+ drive capability enable bit"] + pub const fn i2c1_fmp(&self) -> bool { + let val = (self.0 >> 12usize) & 0x01; val != 0 } - #[doc = "Receiver timeout enable"] - pub fn set_rtoen(&mut self, val: bool) { - self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize); - } - #[doc = "Address of the USART node"] - pub const fn add(&self) -> u8 { - let val = (self.0 >> 24usize) & 0xff; - val as u8 + #[doc = "I2C1 Fm+ drive capability enable bit"] + pub fn set_i2c1_fmp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize); } - #[doc = "Address of the USART node"] - pub fn set_add(&mut self, val: u8) { - self.0 = (self.0 & !(0xff << 24usize)) | (((val as u32) & 0xff) << 24usize); + #[doc = "I2C2 Fm+ drive capability enable bit"] + pub const fn i2c2_fmp(&self) -> bool { + let val = (self.0 >> 13usize) & 0x01; + val != 0 } - } - impl Default for Cr2 { - fn default() -> Cr2 { - Cr2(0) + #[doc = "I2C2 Fm+ drive capability enable bit"] + pub fn set_i2c2_fmp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize); } - } - #[doc = "Baud rate register"] - #[repr(transparent)] - #[derive(Copy, Clone, Eq, PartialEq)] - pub struct Brr(pub u32); - impl Brr { - #[doc = "mantissa of USARTDIV"] - pub const fn brr(&self) -> u16 { - let val = (self.0 >> 0usize) & 0xffff; - val as u16 + #[doc = "I2C3 Fm+ drive capability enable bit"] + pub const fn i2c3_fmp(&self) -> bool { + let val = (self.0 >> 14usize) & 0x01; + val != 0 } - #[doc = "mantissa of USARTDIV"] - pub fn set_brr(&mut self, val: u16) { - self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize); + #[doc = "I2C3 Fm+ drive capability enable bit"] + pub fn set_i2c3_fmp(&mut self, val: bool) { + self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize); } } - impl Default for Brr { - fn default() -> Brr { - Brr(0) + impl Default for Cfgr2 { + fn default() -> Cfgr2 { + Cfgr2(0) } } } diff --git a/embassy-stm32/src/pac/stm32f401cb.rs b/embassy-stm32/src/pac/stm32f401cb.rs index 130debc0e..f9d7eb1a0 100644 --- a/embassy-stm32/src/pac/stm32f401cb.rs +++ b/embassy-stm32/src/pac/stm32f401cb.rs @@ -126,6 +126,22 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); impl_spi!(SPI1, APB2); impl_spi_pin!(SPI1, SckPin, PA5, 5); @@ -153,18 +169,6 @@ impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); impl_spi_pin!(SPI3, MosiPin, PD6, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -196,9 +200,9 @@ impl_usart_pin!(USART6, CkPin, PC8, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -209,8 +213,8 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM2, TIM3, - TIM4, TIM5, TIM9, USART1, USART2, USART6 + PH10, PH11, PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f401cc.rs b/embassy-stm32/src/pac/stm32f401cc.rs index 130debc0e..f9d7eb1a0 100644 --- a/embassy-stm32/src/pac/stm32f401cc.rs +++ b/embassy-stm32/src/pac/stm32f401cc.rs @@ -126,6 +126,22 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); impl_spi!(SPI1, APB2); impl_spi_pin!(SPI1, SckPin, PA5, 5); @@ -153,18 +169,6 @@ impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); impl_spi_pin!(SPI3, MosiPin, PD6, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -196,9 +200,9 @@ impl_usart_pin!(USART6, CkPin, PC8, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -209,8 +213,8 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM2, TIM3, - TIM4, TIM5, TIM9, USART1, USART2, USART6 + PH10, PH11, PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f401cd.rs b/embassy-stm32/src/pac/stm32f401cd.rs index 130debc0e..f9d7eb1a0 100644 --- a/embassy-stm32/src/pac/stm32f401cd.rs +++ b/embassy-stm32/src/pac/stm32f401cd.rs @@ -126,6 +126,22 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); impl_spi!(SPI1, APB2); impl_spi_pin!(SPI1, SckPin, PA5, 5); @@ -153,18 +169,6 @@ impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); impl_spi_pin!(SPI3, MosiPin, PD6, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -196,9 +200,9 @@ impl_usart_pin!(USART6, CkPin, PC8, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -209,8 +213,8 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM2, TIM3, - TIM4, TIM5, TIM9, USART1, USART2, USART6 + PH10, PH11, PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f401ce.rs b/embassy-stm32/src/pac/stm32f401ce.rs index 130debc0e..f9d7eb1a0 100644 --- a/embassy-stm32/src/pac/stm32f401ce.rs +++ b/embassy-stm32/src/pac/stm32f401ce.rs @@ -126,6 +126,22 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); impl_spi!(SPI1, APB2); impl_spi_pin!(SPI1, SckPin, PA5, 5); @@ -153,18 +169,6 @@ impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); impl_spi_pin!(SPI3, MosiPin, PD6, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -196,9 +200,9 @@ impl_usart_pin!(USART6, CkPin, PC8, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -209,8 +213,8 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM2, TIM3, - TIM4, TIM5, TIM9, USART1, USART2, USART6 + PH10, PH11, PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f401rb.rs b/embassy-stm32/src/pac/stm32f401rb.rs index 130debc0e..f9d7eb1a0 100644 --- a/embassy-stm32/src/pac/stm32f401rb.rs +++ b/embassy-stm32/src/pac/stm32f401rb.rs @@ -126,6 +126,22 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); impl_spi!(SPI1, APB2); impl_spi_pin!(SPI1, SckPin, PA5, 5); @@ -153,18 +169,6 @@ impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); impl_spi_pin!(SPI3, MosiPin, PD6, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -196,9 +200,9 @@ impl_usart_pin!(USART6, CkPin, PC8, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -209,8 +213,8 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM2, TIM3, - TIM4, TIM5, TIM9, USART1, USART2, USART6 + PH10, PH11, PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f401rc.rs b/embassy-stm32/src/pac/stm32f401rc.rs index 130debc0e..f9d7eb1a0 100644 --- a/embassy-stm32/src/pac/stm32f401rc.rs +++ b/embassy-stm32/src/pac/stm32f401rc.rs @@ -126,6 +126,22 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); impl_spi!(SPI1, APB2); impl_spi_pin!(SPI1, SckPin, PA5, 5); @@ -153,18 +169,6 @@ impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); impl_spi_pin!(SPI3, MosiPin, PD6, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -196,9 +200,9 @@ impl_usart_pin!(USART6, CkPin, PC8, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -209,8 +213,8 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM2, TIM3, - TIM4, TIM5, TIM9, USART1, USART2, USART6 + PH10, PH11, PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f401rd.rs b/embassy-stm32/src/pac/stm32f401rd.rs index 130debc0e..f9d7eb1a0 100644 --- a/embassy-stm32/src/pac/stm32f401rd.rs +++ b/embassy-stm32/src/pac/stm32f401rd.rs @@ -126,6 +126,22 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); impl_spi!(SPI1, APB2); impl_spi_pin!(SPI1, SckPin, PA5, 5); @@ -153,18 +169,6 @@ impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); impl_spi_pin!(SPI3, MosiPin, PD6, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -196,9 +200,9 @@ impl_usart_pin!(USART6, CkPin, PC8, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -209,8 +213,8 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM2, TIM3, - TIM4, TIM5, TIM9, USART1, USART2, USART6 + PH10, PH11, PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f401re.rs b/embassy-stm32/src/pac/stm32f401re.rs index 130debc0e..f9d7eb1a0 100644 --- a/embassy-stm32/src/pac/stm32f401re.rs +++ b/embassy-stm32/src/pac/stm32f401re.rs @@ -126,6 +126,22 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); impl_spi!(SPI1, APB2); impl_spi_pin!(SPI1, SckPin, PA5, 5); @@ -153,18 +169,6 @@ impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); impl_spi_pin!(SPI3, MosiPin, PD6, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -196,9 +200,9 @@ impl_usart_pin!(USART6, CkPin, PC8, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -209,8 +213,8 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM2, TIM3, - TIM4, TIM5, TIM9, USART1, USART2, USART6 + PH10, PH11, PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f401vb.rs b/embassy-stm32/src/pac/stm32f401vb.rs index 1e6883871..958776e9c 100644 --- a/embassy-stm32/src/pac/stm32f401vb.rs +++ b/embassy-stm32/src/pac/stm32f401vb.rs @@ -126,6 +126,22 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); impl_spi!(SPI1, APB2); impl_spi_pin!(SPI1, SckPin, PA5, 5); @@ -161,18 +177,6 @@ impl_spi_pin!(SPI4, SckPin, PE2, 5); impl_spi_pin!(SPI4, MisoPin, PE5, 5); impl_spi_pin!(SPI4, MosiPin, PE6, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -204,9 +208,9 @@ impl_usart_pin!(USART6, CkPin, PC8, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -217,8 +221,8 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, SPI1, SPI2, SPI3, SPI4, SYSCFG, TIM1, TIM10, TIM11, TIM2, - TIM3, TIM4, TIM5, TIM9, USART1, USART2, USART6 + PH10, PH11, PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, SPI1, SPI2, SPI3, SPI4, SYSCFG, USART1, + USART2, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f401vc.rs b/embassy-stm32/src/pac/stm32f401vc.rs index 1e6883871..958776e9c 100644 --- a/embassy-stm32/src/pac/stm32f401vc.rs +++ b/embassy-stm32/src/pac/stm32f401vc.rs @@ -126,6 +126,22 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); impl_spi!(SPI1, APB2); impl_spi_pin!(SPI1, SckPin, PA5, 5); @@ -161,18 +177,6 @@ impl_spi_pin!(SPI4, SckPin, PE2, 5); impl_spi_pin!(SPI4, MisoPin, PE5, 5); impl_spi_pin!(SPI4, MosiPin, PE6, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -204,9 +208,9 @@ impl_usart_pin!(USART6, CkPin, PC8, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -217,8 +221,8 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, SPI1, SPI2, SPI3, SPI4, SYSCFG, TIM1, TIM10, TIM11, TIM2, - TIM3, TIM4, TIM5, TIM9, USART1, USART2, USART6 + PH10, PH11, PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, SPI1, SPI2, SPI3, SPI4, SYSCFG, USART1, + USART2, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f401vd.rs b/embassy-stm32/src/pac/stm32f401vd.rs index 1e6883871..958776e9c 100644 --- a/embassy-stm32/src/pac/stm32f401vd.rs +++ b/embassy-stm32/src/pac/stm32f401vd.rs @@ -126,6 +126,22 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); impl_spi!(SPI1, APB2); impl_spi_pin!(SPI1, SckPin, PA5, 5); @@ -161,18 +177,6 @@ impl_spi_pin!(SPI4, SckPin, PE2, 5); impl_spi_pin!(SPI4, MisoPin, PE5, 5); impl_spi_pin!(SPI4, MosiPin, PE6, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -204,9 +208,9 @@ impl_usart_pin!(USART6, CkPin, PC8, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -217,8 +221,8 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, SPI1, SPI2, SPI3, SPI4, SYSCFG, TIM1, TIM10, TIM11, TIM2, - TIM3, TIM4, TIM5, TIM9, USART1, USART2, USART6 + PH10, PH11, PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, SPI1, SPI2, SPI3, SPI4, SYSCFG, USART1, + USART2, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f401ve.rs b/embassy-stm32/src/pac/stm32f401ve.rs index 1e6883871..958776e9c 100644 --- a/embassy-stm32/src/pac/stm32f401ve.rs +++ b/embassy-stm32/src/pac/stm32f401ve.rs @@ -126,6 +126,22 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); impl_spi!(SPI1, APB2); impl_spi_pin!(SPI1, SckPin, PA5, 5); @@ -161,18 +177,6 @@ impl_spi_pin!(SPI4, SckPin, PE2, 5); impl_spi_pin!(SPI4, MisoPin, PE5, 5); impl_spi_pin!(SPI4, MosiPin, PE6, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -204,9 +208,9 @@ impl_usart_pin!(USART6, CkPin, PC8, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -217,8 +221,8 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, SPI1, SPI2, SPI3, SPI4, SYSCFG, TIM1, TIM10, TIM11, TIM2, - TIM3, TIM4, TIM5, TIM9, USART1, USART2, USART6 + PH10, PH11, PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, SPI1, SPI2, SPI3, SPI4, SYSCFG, USART1, + USART2, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f405oe.rs b/embassy-stm32/src/pac/stm32f405oe.rs index d95669ff4..8bb67b7ae 100644 --- a/embassy-stm32/src/pac/stm32f405oe.rs +++ b/embassy-stm32/src/pac/stm32f405oe.rs @@ -177,6 +177,26 @@ impl_gpio_pin!(PI12, 8, 12, EXTI12); impl_gpio_pin!(PI13, 8, 13, EXTI13); impl_gpio_pin!(PI14, 8, 14, EXTI14); impl_gpio_pin!(PI15, 8, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -207,24 +227,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -276,10 +278,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -293,8 +295,8 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PI13, PI14, PI15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f405og.rs b/embassy-stm32/src/pac/stm32f405og.rs index d95669ff4..8bb67b7ae 100644 --- a/embassy-stm32/src/pac/stm32f405og.rs +++ b/embassy-stm32/src/pac/stm32f405og.rs @@ -177,6 +177,26 @@ impl_gpio_pin!(PI12, 8, 12, EXTI12); impl_gpio_pin!(PI13, 8, 13, EXTI13); impl_gpio_pin!(PI14, 8, 14, EXTI14); impl_gpio_pin!(PI15, 8, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -207,24 +227,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -276,10 +278,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -293,8 +295,8 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PI13, PI14, PI15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f405rg.rs b/embassy-stm32/src/pac/stm32f405rg.rs index d95669ff4..8bb67b7ae 100644 --- a/embassy-stm32/src/pac/stm32f405rg.rs +++ b/embassy-stm32/src/pac/stm32f405rg.rs @@ -177,6 +177,26 @@ impl_gpio_pin!(PI12, 8, 12, EXTI12); impl_gpio_pin!(PI13, 8, 13, EXTI13); impl_gpio_pin!(PI14, 8, 14, EXTI14); impl_gpio_pin!(PI15, 8, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -207,24 +227,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -276,10 +278,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -293,8 +295,8 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PI13, PI14, PI15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f405vg.rs b/embassy-stm32/src/pac/stm32f405vg.rs index d95669ff4..8bb67b7ae 100644 --- a/embassy-stm32/src/pac/stm32f405vg.rs +++ b/embassy-stm32/src/pac/stm32f405vg.rs @@ -177,6 +177,26 @@ impl_gpio_pin!(PI12, 8, 12, EXTI12); impl_gpio_pin!(PI13, 8, 13, EXTI13); impl_gpio_pin!(PI14, 8, 14, EXTI14); impl_gpio_pin!(PI15, 8, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -207,24 +227,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -276,10 +278,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -293,8 +295,8 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PI13, PI14, PI15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f405zg.rs b/embassy-stm32/src/pac/stm32f405zg.rs index d95669ff4..8bb67b7ae 100644 --- a/embassy-stm32/src/pac/stm32f405zg.rs +++ b/embassy-stm32/src/pac/stm32f405zg.rs @@ -177,6 +177,26 @@ impl_gpio_pin!(PI12, 8, 12, EXTI12); impl_gpio_pin!(PI13, 8, 13, EXTI13); impl_gpio_pin!(PI14, 8, 14, EXTI14); impl_gpio_pin!(PI15, 8, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -207,24 +227,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -276,10 +278,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -293,8 +295,8 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PI13, PI14, PI15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f407ie.rs b/embassy-stm32/src/pac/stm32f407ie.rs index aaf10837a..039454c3e 100644 --- a/embassy-stm32/src/pac/stm32f407ie.rs +++ b/embassy-stm32/src/pac/stm32f407ie.rs @@ -177,6 +177,26 @@ impl_gpio_pin!(PI12, 8, 12, EXTI12); impl_gpio_pin!(PI13, 8, 13, EXTI13); impl_gpio_pin!(PI14, 8, 14, EXTI14); impl_gpio_pin!(PI15, 8, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -207,24 +227,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -276,10 +278,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -293,8 +295,8 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PI13, PI14, PI15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f407ig.rs b/embassy-stm32/src/pac/stm32f407ig.rs index aaf10837a..039454c3e 100644 --- a/embassy-stm32/src/pac/stm32f407ig.rs +++ b/embassy-stm32/src/pac/stm32f407ig.rs @@ -177,6 +177,26 @@ impl_gpio_pin!(PI12, 8, 12, EXTI12); impl_gpio_pin!(PI13, 8, 13, EXTI13); impl_gpio_pin!(PI14, 8, 14, EXTI14); impl_gpio_pin!(PI15, 8, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -207,24 +227,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -276,10 +278,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -293,8 +295,8 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PI13, PI14, PI15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f407ve.rs b/embassy-stm32/src/pac/stm32f407ve.rs index aaf10837a..039454c3e 100644 --- a/embassy-stm32/src/pac/stm32f407ve.rs +++ b/embassy-stm32/src/pac/stm32f407ve.rs @@ -177,6 +177,26 @@ impl_gpio_pin!(PI12, 8, 12, EXTI12); impl_gpio_pin!(PI13, 8, 13, EXTI13); impl_gpio_pin!(PI14, 8, 14, EXTI14); impl_gpio_pin!(PI15, 8, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -207,24 +227,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -276,10 +278,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -293,8 +295,8 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PI13, PI14, PI15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f407vg.rs b/embassy-stm32/src/pac/stm32f407vg.rs index aaf10837a..039454c3e 100644 --- a/embassy-stm32/src/pac/stm32f407vg.rs +++ b/embassy-stm32/src/pac/stm32f407vg.rs @@ -177,6 +177,26 @@ impl_gpio_pin!(PI12, 8, 12, EXTI12); impl_gpio_pin!(PI13, 8, 13, EXTI13); impl_gpio_pin!(PI14, 8, 14, EXTI14); impl_gpio_pin!(PI15, 8, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -207,24 +227,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -276,10 +278,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -293,8 +295,8 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PI13, PI14, PI15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f407ze.rs b/embassy-stm32/src/pac/stm32f407ze.rs index aaf10837a..039454c3e 100644 --- a/embassy-stm32/src/pac/stm32f407ze.rs +++ b/embassy-stm32/src/pac/stm32f407ze.rs @@ -177,6 +177,26 @@ impl_gpio_pin!(PI12, 8, 12, EXTI12); impl_gpio_pin!(PI13, 8, 13, EXTI13); impl_gpio_pin!(PI14, 8, 14, EXTI14); impl_gpio_pin!(PI15, 8, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -207,24 +227,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -276,10 +278,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -293,8 +295,8 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PI13, PI14, PI15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f407zg.rs b/embassy-stm32/src/pac/stm32f407zg.rs index aaf10837a..039454c3e 100644 --- a/embassy-stm32/src/pac/stm32f407zg.rs +++ b/embassy-stm32/src/pac/stm32f407zg.rs @@ -177,6 +177,26 @@ impl_gpio_pin!(PI12, 8, 12, EXTI12); impl_gpio_pin!(PI13, 8, 13, EXTI13); impl_gpio_pin!(PI14, 8, 14, EXTI14); impl_gpio_pin!(PI15, 8, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -207,24 +227,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -276,10 +278,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -293,8 +295,8 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PI13, PI14, PI15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f410c8.rs b/embassy-stm32/src/pac/stm32f410c8.rs index 58861b53f..a0eee347c 100644 --- a/embassy-stm32/src/pac/stm32f410c8.rs +++ b/embassy-stm32/src/pac/stm32f410c8.rs @@ -92,15 +92,21 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); pub const RNG: rng::Rng = rng::Rng(0x40080000 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -129,9 +135,9 @@ impl_usart_pin!(USART6, CkPin, PC8, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -140,8 +146,8 @@ embassy_extras::peripherals!( PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM11, TIM5, TIM6, - TIM9, USART1, USART2, USART6 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, I2C1, I2C2, RNG, SYSCFG, USART1, + USART2, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f410cb.rs b/embassy-stm32/src/pac/stm32f410cb.rs index 58861b53f..a0eee347c 100644 --- a/embassy-stm32/src/pac/stm32f410cb.rs +++ b/embassy-stm32/src/pac/stm32f410cb.rs @@ -92,15 +92,21 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); pub const RNG: rng::Rng = rng::Rng(0x40080000 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -129,9 +135,9 @@ impl_usart_pin!(USART6, CkPin, PC8, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -140,8 +146,8 @@ embassy_extras::peripherals!( PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM11, TIM5, TIM6, - TIM9, USART1, USART2, USART6 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, I2C1, I2C2, RNG, SYSCFG, USART1, + USART2, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f410r8.rs b/embassy-stm32/src/pac/stm32f410r8.rs index 58861b53f..a0eee347c 100644 --- a/embassy-stm32/src/pac/stm32f410r8.rs +++ b/embassy-stm32/src/pac/stm32f410r8.rs @@ -92,15 +92,21 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); pub const RNG: rng::Rng = rng::Rng(0x40080000 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -129,9 +135,9 @@ impl_usart_pin!(USART6, CkPin, PC8, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -140,8 +146,8 @@ embassy_extras::peripherals!( PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM11, TIM5, TIM6, - TIM9, USART1, USART2, USART6 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, I2C1, I2C2, RNG, SYSCFG, USART1, + USART2, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f410rb.rs b/embassy-stm32/src/pac/stm32f410rb.rs index 58861b53f..a0eee347c 100644 --- a/embassy-stm32/src/pac/stm32f410rb.rs +++ b/embassy-stm32/src/pac/stm32f410rb.rs @@ -92,15 +92,21 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); pub const RNG: rng::Rng = rng::Rng(0x40080000 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -129,9 +135,9 @@ impl_usart_pin!(USART6, CkPin, PC8, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -140,8 +146,8 @@ embassy_extras::peripherals!( PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM11, TIM5, TIM6, - TIM9, USART1, USART2, USART6 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, I2C1, I2C2, RNG, SYSCFG, USART1, + USART2, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f410t8.rs b/embassy-stm32/src/pac/stm32f410t8.rs index 3b63a260b..e8a1bce03 100644 --- a/embassy-stm32/src/pac/stm32f410t8.rs +++ b/embassy-stm32/src/pac/stm32f410t8.rs @@ -92,15 +92,21 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); pub const RNG: rng::Rng = rng::Rng(0x40080000 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -122,9 +128,9 @@ impl_usart_pin!(USART2, CkPin, PA4, 7); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -133,8 +139,8 @@ embassy_extras::peripherals!( PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM11, TIM5, TIM6, - TIM9, USART1, USART2 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, I2C1, I2C2, RNG, SYSCFG, USART1, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f410tb.rs b/embassy-stm32/src/pac/stm32f410tb.rs index 3b63a260b..e8a1bce03 100644 --- a/embassy-stm32/src/pac/stm32f410tb.rs +++ b/embassy-stm32/src/pac/stm32f410tb.rs @@ -92,15 +92,21 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); pub const RNG: rng::Rng = rng::Rng(0x40080000 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -122,9 +128,9 @@ impl_usart_pin!(USART2, CkPin, PA4, 7); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -133,8 +139,8 @@ embassy_extras::peripherals!( PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM11, TIM5, TIM6, - TIM9, USART1, USART2 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, I2C1, I2C2, RNG, SYSCFG, USART1, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f411cc.rs b/embassy-stm32/src/pac/stm32f411cc.rs index 25b629b7b..99b80c415 100644 --- a/embassy-stm32/src/pac/stm32f411cc.rs +++ b/embassy-stm32/src/pac/stm32f411cc.rs @@ -126,6 +126,24 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PB8, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); impl_spi!(SPI1, APB2); impl_spi_pin!(SPI1, SckPin, PA5, 5); @@ -178,18 +196,6 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6); impl_spi_pin!(SPI5, MisoPin, PE5, 6); impl_spi_pin!(SPI5, MosiPin, PE6, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -223,9 +229,9 @@ impl_usart_pin!(USART6, CkPin, PC8, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -236,8 +242,8 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, - TIM2, TIM3, TIM4, TIM5, TIM9, USART1, USART2, USART6 + PH10, PH11, PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, + USART1, USART2, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f411ce.rs b/embassy-stm32/src/pac/stm32f411ce.rs index 25b629b7b..99b80c415 100644 --- a/embassy-stm32/src/pac/stm32f411ce.rs +++ b/embassy-stm32/src/pac/stm32f411ce.rs @@ -126,6 +126,24 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PB8, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); impl_spi!(SPI1, APB2); impl_spi_pin!(SPI1, SckPin, PA5, 5); @@ -178,18 +196,6 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6); impl_spi_pin!(SPI5, MisoPin, PE5, 6); impl_spi_pin!(SPI5, MosiPin, PE6, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -223,9 +229,9 @@ impl_usart_pin!(USART6, CkPin, PC8, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -236,8 +242,8 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, - TIM2, TIM3, TIM4, TIM5, TIM9, USART1, USART2, USART6 + PH10, PH11, PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, + USART1, USART2, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f411rc.rs b/embassy-stm32/src/pac/stm32f411rc.rs index 25b629b7b..99b80c415 100644 --- a/embassy-stm32/src/pac/stm32f411rc.rs +++ b/embassy-stm32/src/pac/stm32f411rc.rs @@ -126,6 +126,24 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PB8, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); impl_spi!(SPI1, APB2); impl_spi_pin!(SPI1, SckPin, PA5, 5); @@ -178,18 +196,6 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6); impl_spi_pin!(SPI5, MisoPin, PE5, 6); impl_spi_pin!(SPI5, MosiPin, PE6, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -223,9 +229,9 @@ impl_usart_pin!(USART6, CkPin, PC8, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -236,8 +242,8 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, - TIM2, TIM3, TIM4, TIM5, TIM9, USART1, USART2, USART6 + PH10, PH11, PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, + USART1, USART2, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f411re.rs b/embassy-stm32/src/pac/stm32f411re.rs index 25b629b7b..99b80c415 100644 --- a/embassy-stm32/src/pac/stm32f411re.rs +++ b/embassy-stm32/src/pac/stm32f411re.rs @@ -126,6 +126,24 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PB8, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); impl_spi!(SPI1, APB2); impl_spi_pin!(SPI1, SckPin, PA5, 5); @@ -178,18 +196,6 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6); impl_spi_pin!(SPI5, MisoPin, PE5, 6); impl_spi_pin!(SPI5, MosiPin, PE6, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -223,9 +229,9 @@ impl_usart_pin!(USART6, CkPin, PC8, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -236,8 +242,8 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, - TIM2, TIM3, TIM4, TIM5, TIM9, USART1, USART2, USART6 + PH10, PH11, PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, + USART1, USART2, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f411vc.rs b/embassy-stm32/src/pac/stm32f411vc.rs index 25b629b7b..99b80c415 100644 --- a/embassy-stm32/src/pac/stm32f411vc.rs +++ b/embassy-stm32/src/pac/stm32f411vc.rs @@ -126,6 +126,24 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PB8, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); impl_spi!(SPI1, APB2); impl_spi_pin!(SPI1, SckPin, PA5, 5); @@ -178,18 +196,6 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6); impl_spi_pin!(SPI5, MisoPin, PE5, 6); impl_spi_pin!(SPI5, MosiPin, PE6, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -223,9 +229,9 @@ impl_usart_pin!(USART6, CkPin, PC8, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -236,8 +242,8 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, - TIM2, TIM3, TIM4, TIM5, TIM9, USART1, USART2, USART6 + PH10, PH11, PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, + USART1, USART2, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f411ve.rs b/embassy-stm32/src/pac/stm32f411ve.rs index 25b629b7b..99b80c415 100644 --- a/embassy-stm32/src/pac/stm32f411ve.rs +++ b/embassy-stm32/src/pac/stm32f411ve.rs @@ -126,6 +126,24 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PB8, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); impl_spi!(SPI1, APB2); impl_spi_pin!(SPI1, SckPin, PA5, 5); @@ -178,18 +196,6 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6); impl_spi_pin!(SPI5, MisoPin, PE5, 6); impl_spi_pin!(SPI5, MosiPin, PE6, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -223,9 +229,9 @@ impl_usart_pin!(USART6, CkPin, PC8, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -236,8 +242,8 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, - TIM2, TIM3, TIM4, TIM5, TIM9, USART1, USART2, USART6 + PH10, PH11, PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, + USART1, USART2, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f412ce.rs b/embassy-stm32/src/pac/stm32f412ce.rs index b4629cba0..22ae7a1cd 100644 --- a/embassy-stm32/src/pac/stm32f412ce.rs +++ b/embassy-stm32/src/pac/stm32f412ce.rs @@ -92,6 +92,24 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PB8, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -132,24 +150,6 @@ impl_spi_pin!(SPI5, MisoPin, PA12, 6); impl_spi_pin!(SPI5, SckPin, PB0, 6); impl_spi_pin!(SPI5, MosiPin, PB8, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -189,10 +189,10 @@ impl_usart_pin!(USART6, CkPin, PC8, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -201,9 +201,8 @@ embassy_extras::peripherals!( PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, - SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, - TIM9, USART1, USART2, USART3, USART6 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, + SPI3, SPI4, SPI5, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f412cg.rs b/embassy-stm32/src/pac/stm32f412cg.rs index b4629cba0..22ae7a1cd 100644 --- a/embassy-stm32/src/pac/stm32f412cg.rs +++ b/embassy-stm32/src/pac/stm32f412cg.rs @@ -92,6 +92,24 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PB8, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -132,24 +150,6 @@ impl_spi_pin!(SPI5, MisoPin, PA12, 6); impl_spi_pin!(SPI5, SckPin, PB0, 6); impl_spi_pin!(SPI5, MosiPin, PB8, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -189,10 +189,10 @@ impl_usart_pin!(USART6, CkPin, PC8, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -201,9 +201,8 @@ embassy_extras::peripherals!( PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, - SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, - TIM9, USART1, USART2, USART3, USART6 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, + SPI3, SPI4, SPI5, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f412re.rs b/embassy-stm32/src/pac/stm32f412re.rs index 28e4c5138..8fc147e0f 100644 --- a/embassy-stm32/src/pac/stm32f412re.rs +++ b/embassy-stm32/src/pac/stm32f412re.rs @@ -109,6 +109,24 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PB8, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -151,24 +169,6 @@ impl_spi_pin!(SPI5, MisoPin, PA12, 6); impl_spi_pin!(SPI5, SckPin, PB0, 6); impl_spi_pin!(SPI5, MosiPin, PB8, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -218,10 +218,10 @@ impl_usart_pin!(USART6, CkPin, PC8, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -231,9 +231,8 @@ embassy_extras::peripherals!( PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, - PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, - TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, - USART2, USART3, USART6 + PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, + SPI5, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f412rg.rs b/embassy-stm32/src/pac/stm32f412rg.rs index 28e4c5138..8fc147e0f 100644 --- a/embassy-stm32/src/pac/stm32f412rg.rs +++ b/embassy-stm32/src/pac/stm32f412rg.rs @@ -109,6 +109,24 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PB8, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -151,24 +169,6 @@ impl_spi_pin!(SPI5, MisoPin, PA12, 6); impl_spi_pin!(SPI5, SckPin, PB0, 6); impl_spi_pin!(SPI5, MosiPin, PB8, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -218,10 +218,10 @@ impl_usart_pin!(USART6, CkPin, PC8, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -231,9 +231,8 @@ embassy_extras::peripherals!( PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, - PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, - TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, - USART2, USART3, USART6 + PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, + SPI5, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f412ve.rs b/embassy-stm32/src/pac/stm32f412ve.rs index 7dbe89dc5..635a3e3e7 100644 --- a/embassy-stm32/src/pac/stm32f412ve.rs +++ b/embassy-stm32/src/pac/stm32f412ve.rs @@ -160,6 +160,26 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PB8, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -214,24 +234,6 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6); impl_spi_pin!(SPI5, MisoPin, PE5, 6); impl_spi_pin!(SPI5, MosiPin, PE6, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -288,10 +290,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -304,8 +306,8 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, TIM12, - TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, USART1, + USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f412vg.rs b/embassy-stm32/src/pac/stm32f412vg.rs index 7dbe89dc5..635a3e3e7 100644 --- a/embassy-stm32/src/pac/stm32f412vg.rs +++ b/embassy-stm32/src/pac/stm32f412vg.rs @@ -160,6 +160,26 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PB8, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -214,24 +234,6 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6); impl_spi_pin!(SPI5, MisoPin, PE5, 6); impl_spi_pin!(SPI5, MosiPin, PE6, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -288,10 +290,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -304,8 +306,8 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, TIM12, - TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, USART1, + USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f412ze.rs b/embassy-stm32/src/pac/stm32f412ze.rs index 7dbe89dc5..635a3e3e7 100644 --- a/embassy-stm32/src/pac/stm32f412ze.rs +++ b/embassy-stm32/src/pac/stm32f412ze.rs @@ -160,6 +160,26 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PB8, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -214,24 +234,6 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6); impl_spi_pin!(SPI5, MisoPin, PE5, 6); impl_spi_pin!(SPI5, MosiPin, PE6, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -288,10 +290,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -304,8 +306,8 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, TIM12, - TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, USART1, + USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f412zg.rs b/embassy-stm32/src/pac/stm32f412zg.rs index 7dbe89dc5..635a3e3e7 100644 --- a/embassy-stm32/src/pac/stm32f412zg.rs +++ b/embassy-stm32/src/pac/stm32f412zg.rs @@ -160,6 +160,26 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PB8, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -214,24 +234,6 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6); impl_spi_pin!(SPI5, MisoPin, PE5, 6); impl_spi_pin!(SPI5, MosiPin, PE6, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -288,10 +290,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -304,8 +306,8 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, TIM12, - TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, USART1, + USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f413cg.rs b/embassy-stm32/src/pac/stm32f413cg.rs index 440c31153..41bbc0a23 100644 --- a/embassy-stm32/src/pac/stm32f413cg.rs +++ b/embassy-stm32/src/pac/stm32f413cg.rs @@ -160,6 +160,26 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PB8, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -217,24 +237,6 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6); impl_spi_pin!(SPI5, MisoPin, PE5, 6); impl_spi_pin!(SPI5, MosiPin, PE6, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -275,10 +277,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -291,8 +293,8 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, TIM12, - TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART6 + PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, USART1, + USART2, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f413ch.rs b/embassy-stm32/src/pac/stm32f413ch.rs index 440c31153..41bbc0a23 100644 --- a/embassy-stm32/src/pac/stm32f413ch.rs +++ b/embassy-stm32/src/pac/stm32f413ch.rs @@ -160,6 +160,26 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PB8, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -217,24 +237,6 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6); impl_spi_pin!(SPI5, MisoPin, PE5, 6); impl_spi_pin!(SPI5, MosiPin, PE6, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -275,10 +277,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -291,8 +293,8 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, TIM12, - TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART6 + PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, USART1, + USART2, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f413mg.rs b/embassy-stm32/src/pac/stm32f413mg.rs index edb00a5a1..12bb3ae03 100644 --- a/embassy-stm32/src/pac/stm32f413mg.rs +++ b/embassy-stm32/src/pac/stm32f413mg.rs @@ -160,6 +160,26 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PB8, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -217,24 +237,6 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6); impl_spi_pin!(SPI5, MisoPin, PE5, 6); impl_spi_pin!(SPI5, MosiPin, PE6, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -291,10 +293,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -307,8 +309,8 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, TIM12, - TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, USART1, + USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f413mh.rs b/embassy-stm32/src/pac/stm32f413mh.rs index edb00a5a1..12bb3ae03 100644 --- a/embassy-stm32/src/pac/stm32f413mh.rs +++ b/embassy-stm32/src/pac/stm32f413mh.rs @@ -160,6 +160,26 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PB8, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -217,24 +237,6 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6); impl_spi_pin!(SPI5, MisoPin, PE5, 6); impl_spi_pin!(SPI5, MosiPin, PE6, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -291,10 +293,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -307,8 +309,8 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, TIM12, - TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, USART1, + USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f413rg.rs b/embassy-stm32/src/pac/stm32f413rg.rs index edb00a5a1..12bb3ae03 100644 --- a/embassy-stm32/src/pac/stm32f413rg.rs +++ b/embassy-stm32/src/pac/stm32f413rg.rs @@ -160,6 +160,26 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PB8, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -217,24 +237,6 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6); impl_spi_pin!(SPI5, MisoPin, PE5, 6); impl_spi_pin!(SPI5, MosiPin, PE6, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -291,10 +293,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -307,8 +309,8 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, TIM12, - TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, USART1, + USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f413rh.rs b/embassy-stm32/src/pac/stm32f413rh.rs index edb00a5a1..12bb3ae03 100644 --- a/embassy-stm32/src/pac/stm32f413rh.rs +++ b/embassy-stm32/src/pac/stm32f413rh.rs @@ -160,6 +160,26 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PB8, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -217,24 +237,6 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6); impl_spi_pin!(SPI5, MisoPin, PE5, 6); impl_spi_pin!(SPI5, MosiPin, PE6, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -291,10 +293,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -307,8 +309,8 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, TIM12, - TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, USART1, + USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f413vg.rs b/embassy-stm32/src/pac/stm32f413vg.rs index edb00a5a1..12bb3ae03 100644 --- a/embassy-stm32/src/pac/stm32f413vg.rs +++ b/embassy-stm32/src/pac/stm32f413vg.rs @@ -160,6 +160,26 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PB8, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -217,24 +237,6 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6); impl_spi_pin!(SPI5, MisoPin, PE5, 6); impl_spi_pin!(SPI5, MosiPin, PE6, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -291,10 +293,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -307,8 +309,8 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, TIM12, - TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, USART1, + USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f413vh.rs b/embassy-stm32/src/pac/stm32f413vh.rs index edb00a5a1..12bb3ae03 100644 --- a/embassy-stm32/src/pac/stm32f413vh.rs +++ b/embassy-stm32/src/pac/stm32f413vh.rs @@ -160,6 +160,26 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PB8, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -217,24 +237,6 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6); impl_spi_pin!(SPI5, MisoPin, PE5, 6); impl_spi_pin!(SPI5, MosiPin, PE6, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -291,10 +293,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -307,8 +309,8 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, TIM12, - TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, USART1, + USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f413zg.rs b/embassy-stm32/src/pac/stm32f413zg.rs index edb00a5a1..12bb3ae03 100644 --- a/embassy-stm32/src/pac/stm32f413zg.rs +++ b/embassy-stm32/src/pac/stm32f413zg.rs @@ -160,6 +160,26 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PB8, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -217,24 +237,6 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6); impl_spi_pin!(SPI5, MisoPin, PE5, 6); impl_spi_pin!(SPI5, MosiPin, PE6, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -291,10 +293,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -307,8 +309,8 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, TIM12, - TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, USART1, + USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f413zh.rs b/embassy-stm32/src/pac/stm32f413zh.rs index edb00a5a1..12bb3ae03 100644 --- a/embassy-stm32/src/pac/stm32f413zh.rs +++ b/embassy-stm32/src/pac/stm32f413zh.rs @@ -160,6 +160,26 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PB8, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -217,24 +237,6 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6); impl_spi_pin!(SPI5, MisoPin, PE5, 6); impl_spi_pin!(SPI5, MosiPin, PE6, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -291,10 +293,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -307,8 +309,8 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, TIM12, - TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, USART1, + USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f415og.rs b/embassy-stm32/src/pac/stm32f415og.rs index ab776478d..c260fcdb7 100644 --- a/embassy-stm32/src/pac/stm32f415og.rs +++ b/embassy-stm32/src/pac/stm32f415og.rs @@ -177,6 +177,26 @@ impl_gpio_pin!(PI12, 8, 12, EXTI12); impl_gpio_pin!(PI13, 8, 13, EXTI13); impl_gpio_pin!(PI14, 8, 14, EXTI14); impl_gpio_pin!(PI15, 8, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -207,24 +227,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -276,10 +278,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -293,8 +295,8 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PI13, PI14, PI15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f415rg.rs b/embassy-stm32/src/pac/stm32f415rg.rs index ab776478d..c260fcdb7 100644 --- a/embassy-stm32/src/pac/stm32f415rg.rs +++ b/embassy-stm32/src/pac/stm32f415rg.rs @@ -177,6 +177,26 @@ impl_gpio_pin!(PI12, 8, 12, EXTI12); impl_gpio_pin!(PI13, 8, 13, EXTI13); impl_gpio_pin!(PI14, 8, 14, EXTI14); impl_gpio_pin!(PI15, 8, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -207,24 +227,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -276,10 +278,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -293,8 +295,8 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PI13, PI14, PI15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f415vg.rs b/embassy-stm32/src/pac/stm32f415vg.rs index ab776478d..c260fcdb7 100644 --- a/embassy-stm32/src/pac/stm32f415vg.rs +++ b/embassy-stm32/src/pac/stm32f415vg.rs @@ -177,6 +177,26 @@ impl_gpio_pin!(PI12, 8, 12, EXTI12); impl_gpio_pin!(PI13, 8, 13, EXTI13); impl_gpio_pin!(PI14, 8, 14, EXTI14); impl_gpio_pin!(PI15, 8, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -207,24 +227,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -276,10 +278,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -293,8 +295,8 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PI13, PI14, PI15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f415zg.rs b/embassy-stm32/src/pac/stm32f415zg.rs index ab776478d..c260fcdb7 100644 --- a/embassy-stm32/src/pac/stm32f415zg.rs +++ b/embassy-stm32/src/pac/stm32f415zg.rs @@ -177,6 +177,26 @@ impl_gpio_pin!(PI12, 8, 12, EXTI12); impl_gpio_pin!(PI13, 8, 13, EXTI13); impl_gpio_pin!(PI14, 8, 14, EXTI14); impl_gpio_pin!(PI15, 8, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -207,24 +227,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -276,10 +278,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -293,8 +295,8 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PI13, PI14, PI15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f417ie.rs b/embassy-stm32/src/pac/stm32f417ie.rs index 9c22b293d..382c88326 100644 --- a/embassy-stm32/src/pac/stm32f417ie.rs +++ b/embassy-stm32/src/pac/stm32f417ie.rs @@ -177,6 +177,26 @@ impl_gpio_pin!(PI12, 8, 12, EXTI12); impl_gpio_pin!(PI13, 8, 13, EXTI13); impl_gpio_pin!(PI14, 8, 14, EXTI14); impl_gpio_pin!(PI15, 8, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -207,24 +227,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -276,10 +278,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -293,8 +295,8 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PI13, PI14, PI15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f417ig.rs b/embassy-stm32/src/pac/stm32f417ig.rs index 9c22b293d..382c88326 100644 --- a/embassy-stm32/src/pac/stm32f417ig.rs +++ b/embassy-stm32/src/pac/stm32f417ig.rs @@ -177,6 +177,26 @@ impl_gpio_pin!(PI12, 8, 12, EXTI12); impl_gpio_pin!(PI13, 8, 13, EXTI13); impl_gpio_pin!(PI14, 8, 14, EXTI14); impl_gpio_pin!(PI15, 8, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -207,24 +227,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -276,10 +278,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -293,8 +295,8 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PI13, PI14, PI15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f417ve.rs b/embassy-stm32/src/pac/stm32f417ve.rs index 9c22b293d..382c88326 100644 --- a/embassy-stm32/src/pac/stm32f417ve.rs +++ b/embassy-stm32/src/pac/stm32f417ve.rs @@ -177,6 +177,26 @@ impl_gpio_pin!(PI12, 8, 12, EXTI12); impl_gpio_pin!(PI13, 8, 13, EXTI13); impl_gpio_pin!(PI14, 8, 14, EXTI14); impl_gpio_pin!(PI15, 8, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -207,24 +227,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -276,10 +278,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -293,8 +295,8 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PI13, PI14, PI15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f417vg.rs b/embassy-stm32/src/pac/stm32f417vg.rs index 9c22b293d..382c88326 100644 --- a/embassy-stm32/src/pac/stm32f417vg.rs +++ b/embassy-stm32/src/pac/stm32f417vg.rs @@ -177,6 +177,26 @@ impl_gpio_pin!(PI12, 8, 12, EXTI12); impl_gpio_pin!(PI13, 8, 13, EXTI13); impl_gpio_pin!(PI14, 8, 14, EXTI14); impl_gpio_pin!(PI15, 8, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -207,24 +227,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -276,10 +278,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -293,8 +295,8 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PI13, PI14, PI15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f417ze.rs b/embassy-stm32/src/pac/stm32f417ze.rs index 9c22b293d..382c88326 100644 --- a/embassy-stm32/src/pac/stm32f417ze.rs +++ b/embassy-stm32/src/pac/stm32f417ze.rs @@ -177,6 +177,26 @@ impl_gpio_pin!(PI12, 8, 12, EXTI12); impl_gpio_pin!(PI13, 8, 13, EXTI13); impl_gpio_pin!(PI14, 8, 14, EXTI14); impl_gpio_pin!(PI15, 8, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -207,24 +227,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -276,10 +278,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -293,8 +295,8 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PI13, PI14, PI15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f417zg.rs b/embassy-stm32/src/pac/stm32f417zg.rs index 9c22b293d..382c88326 100644 --- a/embassy-stm32/src/pac/stm32f417zg.rs +++ b/embassy-stm32/src/pac/stm32f417zg.rs @@ -177,6 +177,26 @@ impl_gpio_pin!(PI12, 8, 12, EXTI12); impl_gpio_pin!(PI13, 8, 13, EXTI13); impl_gpio_pin!(PI14, 8, 14, EXTI14); impl_gpio_pin!(PI15, 8, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -207,24 +227,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -276,10 +278,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -293,8 +295,8 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PI13, PI14, PI15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f423ch.rs b/embassy-stm32/src/pac/stm32f423ch.rs index 7915650c4..22c55b012 100644 --- a/embassy-stm32/src/pac/stm32f423ch.rs +++ b/embassy-stm32/src/pac/stm32f423ch.rs @@ -160,6 +160,26 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PB8, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -217,24 +237,6 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6); impl_spi_pin!(SPI5, MisoPin, PE5, 6); impl_spi_pin!(SPI5, MosiPin, PE6, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -275,10 +277,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -291,8 +293,8 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, TIM12, - TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART6 + PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, USART1, + USART2, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f423mh.rs b/embassy-stm32/src/pac/stm32f423mh.rs index 5c7e1f2dd..e2782d3ae 100644 --- a/embassy-stm32/src/pac/stm32f423mh.rs +++ b/embassy-stm32/src/pac/stm32f423mh.rs @@ -160,6 +160,26 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PB8, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -217,24 +237,6 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6); impl_spi_pin!(SPI5, MisoPin, PE5, 6); impl_spi_pin!(SPI5, MosiPin, PE6, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -291,10 +293,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -307,8 +309,8 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, TIM12, - TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, USART1, + USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f423rh.rs b/embassy-stm32/src/pac/stm32f423rh.rs index 5c7e1f2dd..e2782d3ae 100644 --- a/embassy-stm32/src/pac/stm32f423rh.rs +++ b/embassy-stm32/src/pac/stm32f423rh.rs @@ -160,6 +160,26 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PB8, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -217,24 +237,6 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6); impl_spi_pin!(SPI5, MisoPin, PE5, 6); impl_spi_pin!(SPI5, MosiPin, PE6, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -291,10 +293,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -307,8 +309,8 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, TIM12, - TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, USART1, + USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f423vh.rs b/embassy-stm32/src/pac/stm32f423vh.rs index 5c7e1f2dd..e2782d3ae 100644 --- a/embassy-stm32/src/pac/stm32f423vh.rs +++ b/embassy-stm32/src/pac/stm32f423vh.rs @@ -160,6 +160,26 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PB8, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -217,24 +237,6 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6); impl_spi_pin!(SPI5, MisoPin, PE5, 6); impl_spi_pin!(SPI5, MosiPin, PE6, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -291,10 +293,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -307,8 +309,8 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, TIM12, - TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, USART1, + USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f423zh.rs b/embassy-stm32/src/pac/stm32f423zh.rs index 5c7e1f2dd..e2782d3ae 100644 --- a/embassy-stm32/src/pac/stm32f423zh.rs +++ b/embassy-stm32/src/pac/stm32f423zh.rs @@ -160,6 +160,26 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 9); +impl_i2c_pin!(I2C2, SdaPin, PB9, 9); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 9); +impl_i2c_pin!(I2C3, SdaPin, PB8, 9); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -217,24 +237,6 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6); impl_spi_pin!(SPI5, MisoPin, PE5, 6); impl_spi_pin!(SPI5, MosiPin, PE6, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -291,10 +293,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -307,8 +309,8 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, TIM12, - TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, USART1, + USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f427ag.rs b/embassy-stm32/src/pac/stm32f427ag.rs index 523a0a673..f89e938d2 100644 --- a/embassy-stm32/src/pac/stm32f427ag.rs +++ b/embassy-stm32/src/pac/stm32f427ag.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -259,24 +279,6 @@ impl_spi_pin!(SPI5, MosiPin, PF9, 5); impl_spi_pin!(SPI5, SckPin, PH6, 5); impl_spi_pin!(SPI5, MisoPin, PH7, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -328,10 +330,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -347,8 +349,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, USART1, USART2, USART3, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f427ai.rs b/embassy-stm32/src/pac/stm32f427ai.rs index 523a0a673..f89e938d2 100644 --- a/embassy-stm32/src/pac/stm32f427ai.rs +++ b/embassy-stm32/src/pac/stm32f427ai.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -259,24 +279,6 @@ impl_spi_pin!(SPI5, MosiPin, PF9, 5); impl_spi_pin!(SPI5, SckPin, PH6, 5); impl_spi_pin!(SPI5, MisoPin, PH7, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -328,10 +330,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -347,8 +349,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, USART1, USART2, USART3, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f427ig.rs b/embassy-stm32/src/pac/stm32f427ig.rs index 08e49e4cb..cc48a9105 100644 --- a/embassy-stm32/src/pac/stm32f427ig.rs +++ b/embassy-stm32/src/pac/stm32f427ig.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -264,24 +284,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -333,10 +335,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -352,8 +354,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f427ii.rs b/embassy-stm32/src/pac/stm32f427ii.rs index 08e49e4cb..cc48a9105 100644 --- a/embassy-stm32/src/pac/stm32f427ii.rs +++ b/embassy-stm32/src/pac/stm32f427ii.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -264,24 +284,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -333,10 +335,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -352,8 +354,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f427vg.rs b/embassy-stm32/src/pac/stm32f427vg.rs index 8b29853a3..eae6a603f 100644 --- a/embassy-stm32/src/pac/stm32f427vg.rs +++ b/embassy-stm32/src/pac/stm32f427vg.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -251,24 +271,6 @@ impl_spi_pin!(SPI4, SckPin, PE2, 5); impl_spi_pin!(SPI4, MisoPin, PE5, 5); impl_spi_pin!(SPI4, MosiPin, PE6, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -320,10 +322,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -339,8 +341,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f427vi.rs b/embassy-stm32/src/pac/stm32f427vi.rs index 8b29853a3..eae6a603f 100644 --- a/embassy-stm32/src/pac/stm32f427vi.rs +++ b/embassy-stm32/src/pac/stm32f427vi.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -251,24 +271,6 @@ impl_spi_pin!(SPI4, SckPin, PE2, 5); impl_spi_pin!(SPI4, MisoPin, PE5, 5); impl_spi_pin!(SPI4, MosiPin, PE6, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -320,10 +322,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -339,8 +341,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f427zg.rs b/embassy-stm32/src/pac/stm32f427zg.rs index 08e49e4cb..cc48a9105 100644 --- a/embassy-stm32/src/pac/stm32f427zg.rs +++ b/embassy-stm32/src/pac/stm32f427zg.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -264,24 +284,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -333,10 +335,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -352,8 +354,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f427zi.rs b/embassy-stm32/src/pac/stm32f427zi.rs index 08e49e4cb..cc48a9105 100644 --- a/embassy-stm32/src/pac/stm32f427zi.rs +++ b/embassy-stm32/src/pac/stm32f427zi.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -264,24 +284,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -333,10 +335,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -352,8 +354,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f429ag.rs b/embassy-stm32/src/pac/stm32f429ag.rs index 417702773..f4bd912ac 100644 --- a/embassy-stm32/src/pac/stm32f429ag.rs +++ b/embassy-stm32/src/pac/stm32f429ag.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -259,24 +279,6 @@ impl_spi_pin!(SPI5, MosiPin, PF9, 5); impl_spi_pin!(SPI5, SckPin, PH6, 5); impl_spi_pin!(SPI5, MisoPin, PH7, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -328,10 +330,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -347,8 +349,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, USART1, USART2, USART3, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f429ai.rs b/embassy-stm32/src/pac/stm32f429ai.rs index 417702773..f4bd912ac 100644 --- a/embassy-stm32/src/pac/stm32f429ai.rs +++ b/embassy-stm32/src/pac/stm32f429ai.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -259,24 +279,6 @@ impl_spi_pin!(SPI5, MosiPin, PF9, 5); impl_spi_pin!(SPI5, SckPin, PH6, 5); impl_spi_pin!(SPI5, MisoPin, PH7, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -328,10 +330,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -347,8 +349,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, USART1, USART2, USART3, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f429be.rs b/embassy-stm32/src/pac/stm32f429be.rs index f9f862459..37f5ab9d6 100644 --- a/embassy-stm32/src/pac/stm32f429be.rs +++ b/embassy-stm32/src/pac/stm32f429be.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -264,24 +284,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -333,10 +335,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -352,8 +354,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f429bg.rs b/embassy-stm32/src/pac/stm32f429bg.rs index f9f862459..37f5ab9d6 100644 --- a/embassy-stm32/src/pac/stm32f429bg.rs +++ b/embassy-stm32/src/pac/stm32f429bg.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -264,24 +284,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -333,10 +335,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -352,8 +354,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f429bi.rs b/embassy-stm32/src/pac/stm32f429bi.rs index f9f862459..37f5ab9d6 100644 --- a/embassy-stm32/src/pac/stm32f429bi.rs +++ b/embassy-stm32/src/pac/stm32f429bi.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -264,24 +284,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -333,10 +335,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -352,8 +354,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f429ie.rs b/embassy-stm32/src/pac/stm32f429ie.rs index f9f862459..37f5ab9d6 100644 --- a/embassy-stm32/src/pac/stm32f429ie.rs +++ b/embassy-stm32/src/pac/stm32f429ie.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -264,24 +284,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -333,10 +335,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -352,8 +354,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f429ig.rs b/embassy-stm32/src/pac/stm32f429ig.rs index f9f862459..37f5ab9d6 100644 --- a/embassy-stm32/src/pac/stm32f429ig.rs +++ b/embassy-stm32/src/pac/stm32f429ig.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -264,24 +284,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -333,10 +335,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -352,8 +354,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f429ii.rs b/embassy-stm32/src/pac/stm32f429ii.rs index f9f862459..37f5ab9d6 100644 --- a/embassy-stm32/src/pac/stm32f429ii.rs +++ b/embassy-stm32/src/pac/stm32f429ii.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -264,24 +284,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -333,10 +335,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -352,8 +354,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f429ne.rs b/embassy-stm32/src/pac/stm32f429ne.rs index f9f862459..37f5ab9d6 100644 --- a/embassy-stm32/src/pac/stm32f429ne.rs +++ b/embassy-stm32/src/pac/stm32f429ne.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -264,24 +284,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -333,10 +335,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -352,8 +354,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f429ng.rs b/embassy-stm32/src/pac/stm32f429ng.rs index f9f862459..37f5ab9d6 100644 --- a/embassy-stm32/src/pac/stm32f429ng.rs +++ b/embassy-stm32/src/pac/stm32f429ng.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -264,24 +284,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -333,10 +335,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -352,8 +354,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f429ni.rs b/embassy-stm32/src/pac/stm32f429ni.rs index f9f862459..37f5ab9d6 100644 --- a/embassy-stm32/src/pac/stm32f429ni.rs +++ b/embassy-stm32/src/pac/stm32f429ni.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -264,24 +284,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -333,10 +335,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -352,8 +354,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f429ve.rs b/embassy-stm32/src/pac/stm32f429ve.rs index a05479d5d..b361da593 100644 --- a/embassy-stm32/src/pac/stm32f429ve.rs +++ b/embassy-stm32/src/pac/stm32f429ve.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -251,24 +271,6 @@ impl_spi_pin!(SPI4, SckPin, PE2, 5); impl_spi_pin!(SPI4, MisoPin, PE5, 5); impl_spi_pin!(SPI4, MosiPin, PE6, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -320,10 +322,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -339,8 +341,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f429vg.rs b/embassy-stm32/src/pac/stm32f429vg.rs index a05479d5d..b361da593 100644 --- a/embassy-stm32/src/pac/stm32f429vg.rs +++ b/embassy-stm32/src/pac/stm32f429vg.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -251,24 +271,6 @@ impl_spi_pin!(SPI4, SckPin, PE2, 5); impl_spi_pin!(SPI4, MisoPin, PE5, 5); impl_spi_pin!(SPI4, MosiPin, PE6, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -320,10 +322,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -339,8 +341,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f429vi.rs b/embassy-stm32/src/pac/stm32f429vi.rs index a05479d5d..b361da593 100644 --- a/embassy-stm32/src/pac/stm32f429vi.rs +++ b/embassy-stm32/src/pac/stm32f429vi.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -251,24 +271,6 @@ impl_spi_pin!(SPI4, SckPin, PE2, 5); impl_spi_pin!(SPI4, MisoPin, PE5, 5); impl_spi_pin!(SPI4, MosiPin, PE6, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -320,10 +322,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -339,8 +341,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f429ze.rs b/embassy-stm32/src/pac/stm32f429ze.rs index f9f862459..37f5ab9d6 100644 --- a/embassy-stm32/src/pac/stm32f429ze.rs +++ b/embassy-stm32/src/pac/stm32f429ze.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -264,24 +284,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -333,10 +335,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -352,8 +354,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f429zg.rs b/embassy-stm32/src/pac/stm32f429zg.rs index f9f862459..37f5ab9d6 100644 --- a/embassy-stm32/src/pac/stm32f429zg.rs +++ b/embassy-stm32/src/pac/stm32f429zg.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -264,24 +284,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -333,10 +335,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -352,8 +354,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f429zi.rs b/embassy-stm32/src/pac/stm32f429zi.rs index f9f862459..37f5ab9d6 100644 --- a/embassy-stm32/src/pac/stm32f429zi.rs +++ b/embassy-stm32/src/pac/stm32f429zi.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -264,24 +284,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -333,10 +335,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -352,8 +354,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f437ai.rs b/embassy-stm32/src/pac/stm32f437ai.rs index 40ea31aa6..789e54827 100644 --- a/embassy-stm32/src/pac/stm32f437ai.rs +++ b/embassy-stm32/src/pac/stm32f437ai.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -259,24 +279,6 @@ impl_spi_pin!(SPI5, MosiPin, PF9, 5); impl_spi_pin!(SPI5, SckPin, PH6, 5); impl_spi_pin!(SPI5, MisoPin, PH7, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -328,10 +330,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -347,8 +349,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, USART1, USART2, USART3, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f437ig.rs b/embassy-stm32/src/pac/stm32f437ig.rs index 34a3fbdde..757cdf621 100644 --- a/embassy-stm32/src/pac/stm32f437ig.rs +++ b/embassy-stm32/src/pac/stm32f437ig.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -264,24 +284,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -333,10 +335,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -352,8 +354,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f437ii.rs b/embassy-stm32/src/pac/stm32f437ii.rs index 34a3fbdde..757cdf621 100644 --- a/embassy-stm32/src/pac/stm32f437ii.rs +++ b/embassy-stm32/src/pac/stm32f437ii.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -264,24 +284,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -333,10 +335,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -352,8 +354,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f437vg.rs b/embassy-stm32/src/pac/stm32f437vg.rs index 54ec4f054..69f17f8cb 100644 --- a/embassy-stm32/src/pac/stm32f437vg.rs +++ b/embassy-stm32/src/pac/stm32f437vg.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -251,24 +271,6 @@ impl_spi_pin!(SPI4, SckPin, PE2, 5); impl_spi_pin!(SPI4, MisoPin, PE5, 5); impl_spi_pin!(SPI4, MosiPin, PE6, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -320,10 +322,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -339,8 +341,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f437vi.rs b/embassy-stm32/src/pac/stm32f437vi.rs index 54ec4f054..69f17f8cb 100644 --- a/embassy-stm32/src/pac/stm32f437vi.rs +++ b/embassy-stm32/src/pac/stm32f437vi.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -251,24 +271,6 @@ impl_spi_pin!(SPI4, SckPin, PE2, 5); impl_spi_pin!(SPI4, MisoPin, PE5, 5); impl_spi_pin!(SPI4, MosiPin, PE6, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -320,10 +322,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -339,8 +341,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f437zg.rs b/embassy-stm32/src/pac/stm32f437zg.rs index 34a3fbdde..757cdf621 100644 --- a/embassy-stm32/src/pac/stm32f437zg.rs +++ b/embassy-stm32/src/pac/stm32f437zg.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -264,24 +284,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -333,10 +335,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -352,8 +354,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f437zi.rs b/embassy-stm32/src/pac/stm32f437zi.rs index 34a3fbdde..757cdf621 100644 --- a/embassy-stm32/src/pac/stm32f437zi.rs +++ b/embassy-stm32/src/pac/stm32f437zi.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -264,24 +284,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -333,10 +335,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -352,8 +354,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f439ai.rs b/embassy-stm32/src/pac/stm32f439ai.rs index 1a669fea0..4b986af9a 100644 --- a/embassy-stm32/src/pac/stm32f439ai.rs +++ b/embassy-stm32/src/pac/stm32f439ai.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -259,24 +279,6 @@ impl_spi_pin!(SPI5, MosiPin, PF9, 5); impl_spi_pin!(SPI5, SckPin, PH6, 5); impl_spi_pin!(SPI5, MisoPin, PH7, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -328,10 +330,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -347,8 +349,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SYSCFG, USART1, USART2, USART3, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f439bg.rs b/embassy-stm32/src/pac/stm32f439bg.rs index 819bc4a75..bd29d15b6 100644 --- a/embassy-stm32/src/pac/stm32f439bg.rs +++ b/embassy-stm32/src/pac/stm32f439bg.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -264,24 +284,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -333,10 +335,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -352,8 +354,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f439bi.rs b/embassy-stm32/src/pac/stm32f439bi.rs index 819bc4a75..bd29d15b6 100644 --- a/embassy-stm32/src/pac/stm32f439bi.rs +++ b/embassy-stm32/src/pac/stm32f439bi.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -264,24 +284,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -333,10 +335,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -352,8 +354,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f439ig.rs b/embassy-stm32/src/pac/stm32f439ig.rs index 819bc4a75..bd29d15b6 100644 --- a/embassy-stm32/src/pac/stm32f439ig.rs +++ b/embassy-stm32/src/pac/stm32f439ig.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -264,24 +284,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -333,10 +335,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -352,8 +354,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f439ii.rs b/embassy-stm32/src/pac/stm32f439ii.rs index 819bc4a75..bd29d15b6 100644 --- a/embassy-stm32/src/pac/stm32f439ii.rs +++ b/embassy-stm32/src/pac/stm32f439ii.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -264,24 +284,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -333,10 +335,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -352,8 +354,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f439ng.rs b/embassy-stm32/src/pac/stm32f439ng.rs index 819bc4a75..bd29d15b6 100644 --- a/embassy-stm32/src/pac/stm32f439ng.rs +++ b/embassy-stm32/src/pac/stm32f439ng.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -264,24 +284,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -333,10 +335,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -352,8 +354,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f439ni.rs b/embassy-stm32/src/pac/stm32f439ni.rs index 819bc4a75..bd29d15b6 100644 --- a/embassy-stm32/src/pac/stm32f439ni.rs +++ b/embassy-stm32/src/pac/stm32f439ni.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -264,24 +284,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -333,10 +335,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -352,8 +354,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f439vg.rs b/embassy-stm32/src/pac/stm32f439vg.rs index 66922ecaf..98ae2ae93 100644 --- a/embassy-stm32/src/pac/stm32f439vg.rs +++ b/embassy-stm32/src/pac/stm32f439vg.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -251,24 +271,6 @@ impl_spi_pin!(SPI4, SckPin, PE2, 5); impl_spi_pin!(SPI4, MisoPin, PE5, 5); impl_spi_pin!(SPI4, MosiPin, PE6, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -320,10 +322,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -339,8 +341,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f439vi.rs b/embassy-stm32/src/pac/stm32f439vi.rs index 66922ecaf..98ae2ae93 100644 --- a/embassy-stm32/src/pac/stm32f439vi.rs +++ b/embassy-stm32/src/pac/stm32f439vi.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -251,24 +271,6 @@ impl_spi_pin!(SPI4, SckPin, PE2, 5); impl_spi_pin!(SPI4, MisoPin, PE5, 5); impl_spi_pin!(SPI4, MosiPin, PE6, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -320,10 +322,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -339,8 +341,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f439zg.rs b/embassy-stm32/src/pac/stm32f439zg.rs index 819bc4a75..bd29d15b6 100644 --- a/embassy-stm32/src/pac/stm32f439zg.rs +++ b/embassy-stm32/src/pac/stm32f439zg.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -264,24 +284,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -333,10 +335,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -352,8 +354,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f439zi.rs b/embassy-stm32/src/pac/stm32f439zi.rs index 819bc4a75..bd29d15b6 100644 --- a/embassy-stm32/src/pac/stm32f439zi.rs +++ b/embassy-stm32/src/pac/stm32f439zi.rs @@ -211,6 +211,26 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); @@ -264,24 +284,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -333,10 +335,10 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -352,8 +354,8 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f446mc.rs b/embassy-stm32/src/pac/stm32f446mc.rs index 3d3e46df0..598041a53 100644 --- a/embassy-stm32/src/pac/stm32f446mc.rs +++ b/embassy-stm32/src/pac/stm32f446mc.rs @@ -160,6 +160,25 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 4); +impl_i2c_pin!(I2C2, SdaPin, PC12, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); impl_spi!(SPI1, APB2); impl_spi_pin!(SPI1, SckPin, PA5, 5); @@ -206,24 +225,6 @@ impl_spi_pin!(SPI4, SckPin, PG11, 6); impl_spi_pin!(SPI4, MisoPin, PG12, 6); impl_spi_pin!(SPI4, MosiPin, PG13, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -276,9 +277,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -291,8 +292,8 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, SPI1, SPI2, SPI3, SPI4, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, - TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, SPI1, SPI2, SPI3, SPI4, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f446me.rs b/embassy-stm32/src/pac/stm32f446me.rs index 3d3e46df0..598041a53 100644 --- a/embassy-stm32/src/pac/stm32f446me.rs +++ b/embassy-stm32/src/pac/stm32f446me.rs @@ -160,6 +160,25 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 4); +impl_i2c_pin!(I2C2, SdaPin, PC12, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); impl_spi!(SPI1, APB2); impl_spi_pin!(SPI1, SckPin, PA5, 5); @@ -206,24 +225,6 @@ impl_spi_pin!(SPI4, SckPin, PG11, 6); impl_spi_pin!(SPI4, MisoPin, PG12, 6); impl_spi_pin!(SPI4, MosiPin, PG13, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -276,9 +277,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -291,8 +292,8 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, SPI1, SPI2, SPI3, SPI4, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, - TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, SPI1, SPI2, SPI3, SPI4, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f446rc.rs b/embassy-stm32/src/pac/stm32f446rc.rs index cfc4c6262..418e27c35 100644 --- a/embassy-stm32/src/pac/stm32f446rc.rs +++ b/embassy-stm32/src/pac/stm32f446rc.rs @@ -160,6 +160,25 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 4); +impl_i2c_pin!(I2C2, SdaPin, PC12, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); impl_spi!(SPI1, APB2); impl_spi_pin!(SPI1, SckPin, PA5, 5); @@ -194,24 +213,6 @@ impl_spi_pin!(SPI3, MosiPin, PC12, 6); impl_spi_pin!(SPI3, MosiPin, PD0, 6); impl_spi_pin!(SPI3, MosiPin, PD6, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -264,9 +265,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -279,8 +280,8 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f446re.rs b/embassy-stm32/src/pac/stm32f446re.rs index cfc4c6262..418e27c35 100644 --- a/embassy-stm32/src/pac/stm32f446re.rs +++ b/embassy-stm32/src/pac/stm32f446re.rs @@ -160,6 +160,25 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 4); +impl_i2c_pin!(I2C2, SdaPin, PC12, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); impl_spi!(SPI1, APB2); impl_spi_pin!(SPI1, SckPin, PA5, 5); @@ -194,24 +213,6 @@ impl_spi_pin!(SPI3, MosiPin, PC12, 6); impl_spi_pin!(SPI3, MosiPin, PD0, 6); impl_spi_pin!(SPI3, MosiPin, PD6, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -264,9 +265,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -279,8 +280,8 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, - TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3, + USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f446vc.rs b/embassy-stm32/src/pac/stm32f446vc.rs index 3d3e46df0..598041a53 100644 --- a/embassy-stm32/src/pac/stm32f446vc.rs +++ b/embassy-stm32/src/pac/stm32f446vc.rs @@ -160,6 +160,25 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 4); +impl_i2c_pin!(I2C2, SdaPin, PC12, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); impl_spi!(SPI1, APB2); impl_spi_pin!(SPI1, SckPin, PA5, 5); @@ -206,24 +225,6 @@ impl_spi_pin!(SPI4, SckPin, PG11, 6); impl_spi_pin!(SPI4, MisoPin, PG12, 6); impl_spi_pin!(SPI4, MosiPin, PG13, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -276,9 +277,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -291,8 +292,8 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, SPI1, SPI2, SPI3, SPI4, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, - TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, SPI1, SPI2, SPI3, SPI4, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f446ve.rs b/embassy-stm32/src/pac/stm32f446ve.rs index 3d3e46df0..598041a53 100644 --- a/embassy-stm32/src/pac/stm32f446ve.rs +++ b/embassy-stm32/src/pac/stm32f446ve.rs @@ -160,6 +160,25 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 4); +impl_i2c_pin!(I2C2, SdaPin, PC12, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); impl_spi!(SPI1, APB2); impl_spi_pin!(SPI1, SckPin, PA5, 5); @@ -206,24 +225,6 @@ impl_spi_pin!(SPI4, SckPin, PG11, 6); impl_spi_pin!(SPI4, MisoPin, PG12, 6); impl_spi_pin!(SPI4, MosiPin, PG13, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -276,9 +277,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -291,8 +292,8 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, SPI1, SPI2, SPI3, SPI4, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, - TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, SPI1, SPI2, SPI3, SPI4, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f446zc.rs b/embassy-stm32/src/pac/stm32f446zc.rs index 3d3e46df0..598041a53 100644 --- a/embassy-stm32/src/pac/stm32f446zc.rs +++ b/embassy-stm32/src/pac/stm32f446zc.rs @@ -160,6 +160,25 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 4); +impl_i2c_pin!(I2C2, SdaPin, PC12, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); impl_spi!(SPI1, APB2); impl_spi_pin!(SPI1, SckPin, PA5, 5); @@ -206,24 +225,6 @@ impl_spi_pin!(SPI4, SckPin, PG11, 6); impl_spi_pin!(SPI4, MisoPin, PG12, 6); impl_spi_pin!(SPI4, MosiPin, PG13, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -276,9 +277,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -291,8 +292,8 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, SPI1, SPI2, SPI3, SPI4, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, - TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, SPI1, SPI2, SPI3, SPI4, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f446ze.rs b/embassy-stm32/src/pac/stm32f446ze.rs index 3d3e46df0..598041a53 100644 --- a/embassy-stm32/src/pac/stm32f446ze.rs +++ b/embassy-stm32/src/pac/stm32f446ze.rs @@ -160,6 +160,25 @@ impl_gpio_pin!(PH12, 7, 12, EXTI12); impl_gpio_pin!(PH13, 7, 13, EXTI13); impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PB3, 4); +impl_i2c_pin!(I2C2, SdaPin, PC12, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PB4, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); pub const SPI1: spi::Spi = spi::Spi(0x40013000 as _); impl_spi!(SPI1, APB2); impl_spi_pin!(SPI1, SckPin, PA5, 5); @@ -206,24 +225,6 @@ impl_spi_pin!(SPI4, SckPin, PG11, 6); impl_spi_pin!(SPI4, MisoPin, PG12, 6); impl_spi_pin!(SPI4, MosiPin, PG13, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -276,9 +277,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::spi_v1 as spi; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -291,8 +292,8 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, SPI1, SPI2, SPI3, SPI4, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, - TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8, TIM9, USART1, USART2, USART3, USART6 + PH12, PH13, PH14, PH15, I2C1, I2C2, I2C3, SPI1, SPI2, SPI3, SPI4, SYSCFG, USART1, USART2, + USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f469ae.rs b/embassy-stm32/src/pac/stm32f469ae.rs index fa54d59e9..9f9fff645 100644 --- a/embassy-stm32/src/pac/stm32f469ae.rs +++ b/embassy-stm32/src/pac/stm32f469ae.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f469ag.rs b/embassy-stm32/src/pac/stm32f469ag.rs index fa54d59e9..9f9fff645 100644 --- a/embassy-stm32/src/pac/stm32f469ag.rs +++ b/embassy-stm32/src/pac/stm32f469ag.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f469ai.rs b/embassy-stm32/src/pac/stm32f469ai.rs index fa54d59e9..9f9fff645 100644 --- a/embassy-stm32/src/pac/stm32f469ai.rs +++ b/embassy-stm32/src/pac/stm32f469ai.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f469be.rs b/embassy-stm32/src/pac/stm32f469be.rs index fa54d59e9..9f9fff645 100644 --- a/embassy-stm32/src/pac/stm32f469be.rs +++ b/embassy-stm32/src/pac/stm32f469be.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f469bg.rs b/embassy-stm32/src/pac/stm32f469bg.rs index fa54d59e9..9f9fff645 100644 --- a/embassy-stm32/src/pac/stm32f469bg.rs +++ b/embassy-stm32/src/pac/stm32f469bg.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f469bi.rs b/embassy-stm32/src/pac/stm32f469bi.rs index fa54d59e9..9f9fff645 100644 --- a/embassy-stm32/src/pac/stm32f469bi.rs +++ b/embassy-stm32/src/pac/stm32f469bi.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f469ie.rs b/embassy-stm32/src/pac/stm32f469ie.rs index fa54d59e9..9f9fff645 100644 --- a/embassy-stm32/src/pac/stm32f469ie.rs +++ b/embassy-stm32/src/pac/stm32f469ie.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f469ig.rs b/embassy-stm32/src/pac/stm32f469ig.rs index fa54d59e9..9f9fff645 100644 --- a/embassy-stm32/src/pac/stm32f469ig.rs +++ b/embassy-stm32/src/pac/stm32f469ig.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f469ii.rs b/embassy-stm32/src/pac/stm32f469ii.rs index fa54d59e9..9f9fff645 100644 --- a/embassy-stm32/src/pac/stm32f469ii.rs +++ b/embassy-stm32/src/pac/stm32f469ii.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f469ne.rs b/embassy-stm32/src/pac/stm32f469ne.rs index fa54d59e9..9f9fff645 100644 --- a/embassy-stm32/src/pac/stm32f469ne.rs +++ b/embassy-stm32/src/pac/stm32f469ne.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f469ng.rs b/embassy-stm32/src/pac/stm32f469ng.rs index fa54d59e9..9f9fff645 100644 --- a/embassy-stm32/src/pac/stm32f469ng.rs +++ b/embassy-stm32/src/pac/stm32f469ng.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f469ni.rs b/embassy-stm32/src/pac/stm32f469ni.rs index fa54d59e9..9f9fff645 100644 --- a/embassy-stm32/src/pac/stm32f469ni.rs +++ b/embassy-stm32/src/pac/stm32f469ni.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f469ve.rs b/embassy-stm32/src/pac/stm32f469ve.rs index fa54d59e9..9f9fff645 100644 --- a/embassy-stm32/src/pac/stm32f469ve.rs +++ b/embassy-stm32/src/pac/stm32f469ve.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f469vg.rs b/embassy-stm32/src/pac/stm32f469vg.rs index fa54d59e9..9f9fff645 100644 --- a/embassy-stm32/src/pac/stm32f469vg.rs +++ b/embassy-stm32/src/pac/stm32f469vg.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f469vi.rs b/embassy-stm32/src/pac/stm32f469vi.rs index fa54d59e9..9f9fff645 100644 --- a/embassy-stm32/src/pac/stm32f469vi.rs +++ b/embassy-stm32/src/pac/stm32f469vi.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f469ze.rs b/embassy-stm32/src/pac/stm32f469ze.rs index fa54d59e9..9f9fff645 100644 --- a/embassy-stm32/src/pac/stm32f469ze.rs +++ b/embassy-stm32/src/pac/stm32f469ze.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f469zg.rs b/embassy-stm32/src/pac/stm32f469zg.rs index fa54d59e9..9f9fff645 100644 --- a/embassy-stm32/src/pac/stm32f469zg.rs +++ b/embassy-stm32/src/pac/stm32f469zg.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f469zi.rs b/embassy-stm32/src/pac/stm32f469zi.rs index fa54d59e9..9f9fff645 100644 --- a/embassy-stm32/src/pac/stm32f469zi.rs +++ b/embassy-stm32/src/pac/stm32f469zi.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f479ag.rs b/embassy-stm32/src/pac/stm32f479ag.rs index f3008ea48..bcc3abd04 100644 --- a/embassy-stm32/src/pac/stm32f479ag.rs +++ b/embassy-stm32/src/pac/stm32f479ag.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f479ai.rs b/embassy-stm32/src/pac/stm32f479ai.rs index f3008ea48..bcc3abd04 100644 --- a/embassy-stm32/src/pac/stm32f479ai.rs +++ b/embassy-stm32/src/pac/stm32f479ai.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f479bg.rs b/embassy-stm32/src/pac/stm32f479bg.rs index f3008ea48..bcc3abd04 100644 --- a/embassy-stm32/src/pac/stm32f479bg.rs +++ b/embassy-stm32/src/pac/stm32f479bg.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f479bi.rs b/embassy-stm32/src/pac/stm32f479bi.rs index f3008ea48..bcc3abd04 100644 --- a/embassy-stm32/src/pac/stm32f479bi.rs +++ b/embassy-stm32/src/pac/stm32f479bi.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f479ig.rs b/embassy-stm32/src/pac/stm32f479ig.rs index f3008ea48..bcc3abd04 100644 --- a/embassy-stm32/src/pac/stm32f479ig.rs +++ b/embassy-stm32/src/pac/stm32f479ig.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f479ii.rs b/embassy-stm32/src/pac/stm32f479ii.rs index f3008ea48..bcc3abd04 100644 --- a/embassy-stm32/src/pac/stm32f479ii.rs +++ b/embassy-stm32/src/pac/stm32f479ii.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f479ng.rs b/embassy-stm32/src/pac/stm32f479ng.rs index f3008ea48..bcc3abd04 100644 --- a/embassy-stm32/src/pac/stm32f479ng.rs +++ b/embassy-stm32/src/pac/stm32f479ng.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f479ni.rs b/embassy-stm32/src/pac/stm32f479ni.rs index f3008ea48..bcc3abd04 100644 --- a/embassy-stm32/src/pac/stm32f479ni.rs +++ b/embassy-stm32/src/pac/stm32f479ni.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f479vg.rs b/embassy-stm32/src/pac/stm32f479vg.rs index f3008ea48..bcc3abd04 100644 --- a/embassy-stm32/src/pac/stm32f479vg.rs +++ b/embassy-stm32/src/pac/stm32f479vg.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f479vi.rs b/embassy-stm32/src/pac/stm32f479vi.rs index f3008ea48..bcc3abd04 100644 --- a/embassy-stm32/src/pac/stm32f479vi.rs +++ b/embassy-stm32/src/pac/stm32f479vi.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f479zg.rs b/embassy-stm32/src/pac/stm32f479zg.rs index f3008ea48..bcc3abd04 100644 --- a/embassy-stm32/src/pac/stm32f479zg.rs +++ b/embassy-stm32/src/pac/stm32f479zg.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32f479zi.rs b/embassy-stm32/src/pac/stm32f479zi.rs index f3008ea48..bcc3abd04 100644 --- a/embassy-stm32/src/pac/stm32f479zi.rs +++ b/embassy-stm32/src/pac/stm32f479zi.rs @@ -211,27 +211,29 @@ impl_gpio_pin!(PK12, 10, 12, EXTI12); impl_gpio_pin!(PK13, 10, 13, EXTI13); impl_gpio_pin!(PK14, 10, 14, EXTI14); impl_gpio_pin!(PK15, 10, 15, EXTI15); +pub const I2C1: i2c::I2c = i2c::I2c(0x40005400 as _); +impl_i2c!(I2C1); +impl_i2c_pin!(I2C1, SclPin, PB6, 4); +impl_i2c_pin!(I2C1, SdaPin, PB7, 4); +impl_i2c_pin!(I2C1, SclPin, PB8, 4); +impl_i2c_pin!(I2C1, SdaPin, PB9, 4); +pub const I2C2: i2c::I2c = i2c::I2c(0x40005800 as _); +impl_i2c!(I2C2); +impl_i2c_pin!(I2C2, SclPin, PB10, 4); +impl_i2c_pin!(I2C2, SdaPin, PB11, 4); +impl_i2c_pin!(I2C2, SdaPin, PF0, 4); +impl_i2c_pin!(I2C2, SclPin, PF1, 4); +impl_i2c_pin!(I2C2, SclPin, PH4, 4); +impl_i2c_pin!(I2C2, SdaPin, PH5, 4); +pub const I2C3: i2c::I2c = i2c::I2c(0x40005c00 as _); +impl_i2c!(I2C3); +impl_i2c_pin!(I2C3, SclPin, PA8, 4); +impl_i2c_pin!(I2C3, SdaPin, PC9, 4); +impl_i2c_pin!(I2C3, SclPin, PH7, 4); +impl_i2c_pin!(I2C3, SdaPin, PH8, 4); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, HASH_RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); -pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _); pub const USART1: usart::Usart = usart::Usart(0x40011000 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -283,9 +285,9 @@ impl_usart_pin!(USART6, RxPin, PG9, 8); pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; +pub use super::regs::i2c_v1 as i2c; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_f4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v1 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -301,8 +303,7 @@ embassy_extras::peripherals!( PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, - PK15, RNG, SYSCFG, TIM1, TIM10, TIM11, TIM12, TIM13, TIM14, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7, - TIM8, TIM9, USART1, USART2, USART3, USART6 + PK15, I2C1, I2C2, I2C3, RNG, SYSCFG, USART1, USART2, USART3, USART6 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h723ve.rs b/embassy-stm32/src/pac/stm32h723ve.rs index 6a06b5448..f66dc1fc7 100644 --- a/embassy-stm32/src/pac/stm32h723ve.rs +++ b/embassy-stm32/src/pac/stm32h723ve.rs @@ -326,26 +326,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _); -pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -357,7 +337,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -372,8 +351,7 @@ embassy_extras::peripherals!( PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, I2C5, PWR, RNG, SDMMC1, SDMMC2, - SPI1, SPI2, SPI3, SPI4, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM23, TIM24, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI1, SPI2, SPI3, SPI4, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h723vg.rs b/embassy-stm32/src/pac/stm32h723vg.rs index 6a06b5448..f66dc1fc7 100644 --- a/embassy-stm32/src/pac/stm32h723vg.rs +++ b/embassy-stm32/src/pac/stm32h723vg.rs @@ -326,26 +326,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _); -pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -357,7 +337,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -372,8 +351,7 @@ embassy_extras::peripherals!( PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, I2C5, PWR, RNG, SDMMC1, SDMMC2, - SPI1, SPI2, SPI3, SPI4, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM23, TIM24, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI1, SPI2, SPI3, SPI4, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h723ze.rs b/embassy-stm32/src/pac/stm32h723ze.rs index 4035f788b..23795b494 100644 --- a/embassy-stm32/src/pac/stm32h723ze.rs +++ b/embassy-stm32/src/pac/stm32h723ze.rs @@ -337,26 +337,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _); -pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -368,7 +348,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -383,8 +362,7 @@ embassy_extras::peripherals!( PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, I2C5, PWR, RNG, SDMMC1, SDMMC2, - SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, - TIM2, TIM23, TIM24, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h723zg.rs b/embassy-stm32/src/pac/stm32h723zg.rs index 4035f788b..23795b494 100644 --- a/embassy-stm32/src/pac/stm32h723zg.rs +++ b/embassy-stm32/src/pac/stm32h723zg.rs @@ -337,26 +337,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _); -pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -368,7 +348,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -383,8 +362,7 @@ embassy_extras::peripherals!( PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, I2C5, PWR, RNG, SDMMC1, SDMMC2, - SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, - TIM2, TIM23, TIM24, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h725ae.rs b/embassy-stm32/src/pac/stm32h725ae.rs index 4035f788b..23795b494 100644 --- a/embassy-stm32/src/pac/stm32h725ae.rs +++ b/embassy-stm32/src/pac/stm32h725ae.rs @@ -337,26 +337,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _); -pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -368,7 +348,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -383,8 +362,7 @@ embassy_extras::peripherals!( PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, I2C5, PWR, RNG, SDMMC1, SDMMC2, - SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, - TIM2, TIM23, TIM24, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h725ag.rs b/embassy-stm32/src/pac/stm32h725ag.rs index 4035f788b..23795b494 100644 --- a/embassy-stm32/src/pac/stm32h725ag.rs +++ b/embassy-stm32/src/pac/stm32h725ag.rs @@ -337,26 +337,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _); -pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -368,7 +348,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -383,8 +362,7 @@ embassy_extras::peripherals!( PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, I2C5, PWR, RNG, SDMMC1, SDMMC2, - SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, - TIM2, TIM23, TIM24, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h725ie.rs b/embassy-stm32/src/pac/stm32h725ie.rs index 4035f788b..23795b494 100644 --- a/embassy-stm32/src/pac/stm32h725ie.rs +++ b/embassy-stm32/src/pac/stm32h725ie.rs @@ -337,26 +337,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _); -pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -368,7 +348,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -383,8 +362,7 @@ embassy_extras::peripherals!( PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, I2C5, PWR, RNG, SDMMC1, SDMMC2, - SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, - TIM2, TIM23, TIM24, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h725ig.rs b/embassy-stm32/src/pac/stm32h725ig.rs index 4035f788b..23795b494 100644 --- a/embassy-stm32/src/pac/stm32h725ig.rs +++ b/embassy-stm32/src/pac/stm32h725ig.rs @@ -337,26 +337,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _); -pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -368,7 +348,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -383,8 +362,7 @@ embassy_extras::peripherals!( PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, I2C5, PWR, RNG, SDMMC1, SDMMC2, - SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, - TIM2, TIM23, TIM24, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h725re.rs b/embassy-stm32/src/pac/stm32h725re.rs index a9fc62f6d..1828a254f 100644 --- a/embassy-stm32/src/pac/stm32h725re.rs +++ b/embassy-stm32/src/pac/stm32h725re.rs @@ -310,26 +310,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _); -pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -341,7 +321,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -356,8 +335,7 @@ embassy_extras::peripherals!( PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM23, TIM24, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h725rg.rs b/embassy-stm32/src/pac/stm32h725rg.rs index a9fc62f6d..1828a254f 100644 --- a/embassy-stm32/src/pac/stm32h725rg.rs +++ b/embassy-stm32/src/pac/stm32h725rg.rs @@ -310,26 +310,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _); -pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -341,7 +321,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -356,8 +335,7 @@ embassy_extras::peripherals!( PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM23, TIM24, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h725ve.rs b/embassy-stm32/src/pac/stm32h725ve.rs index 6a06b5448..f66dc1fc7 100644 --- a/embassy-stm32/src/pac/stm32h725ve.rs +++ b/embassy-stm32/src/pac/stm32h725ve.rs @@ -326,26 +326,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _); -pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -357,7 +337,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -372,8 +351,7 @@ embassy_extras::peripherals!( PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, I2C5, PWR, RNG, SDMMC1, SDMMC2, - SPI1, SPI2, SPI3, SPI4, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM23, TIM24, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI1, SPI2, SPI3, SPI4, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h725vg.rs b/embassy-stm32/src/pac/stm32h725vg.rs index 6a06b5448..f66dc1fc7 100644 --- a/embassy-stm32/src/pac/stm32h725vg.rs +++ b/embassy-stm32/src/pac/stm32h725vg.rs @@ -326,26 +326,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _); -pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -357,7 +337,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -372,8 +351,7 @@ embassy_extras::peripherals!( PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, I2C5, PWR, RNG, SDMMC1, SDMMC2, - SPI1, SPI2, SPI3, SPI4, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM23, TIM24, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI1, SPI2, SPI3, SPI4, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h725ze.rs b/embassy-stm32/src/pac/stm32h725ze.rs index 4035f788b..23795b494 100644 --- a/embassy-stm32/src/pac/stm32h725ze.rs +++ b/embassy-stm32/src/pac/stm32h725ze.rs @@ -337,26 +337,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _); -pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -368,7 +348,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -383,8 +362,7 @@ embassy_extras::peripherals!( PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, I2C5, PWR, RNG, SDMMC1, SDMMC2, - SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, - TIM2, TIM23, TIM24, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h725zg.rs b/embassy-stm32/src/pac/stm32h725zg.rs index 4035f788b..23795b494 100644 --- a/embassy-stm32/src/pac/stm32h725zg.rs +++ b/embassy-stm32/src/pac/stm32h725zg.rs @@ -337,26 +337,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _); -pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -368,7 +348,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -383,8 +362,7 @@ embassy_extras::peripherals!( PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, I2C5, PWR, RNG, SDMMC1, SDMMC2, - SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, - TIM2, TIM23, TIM24, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h730ab.rs b/embassy-stm32/src/pac/stm32h730ab.rs index 9087f9234..9fc4c1fd6 100644 --- a/embassy-stm32/src/pac/stm32h730ab.rs +++ b/embassy-stm32/src/pac/stm32h730ab.rs @@ -337,26 +337,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _); -pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -368,7 +348,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -383,8 +362,7 @@ embassy_extras::peripherals!( PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, I2C5, PWR, RNG, SDMMC1, SDMMC2, - SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, - TIM2, TIM23, TIM24, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h730ib.rs b/embassy-stm32/src/pac/stm32h730ib.rs index 9087f9234..9fc4c1fd6 100644 --- a/embassy-stm32/src/pac/stm32h730ib.rs +++ b/embassy-stm32/src/pac/stm32h730ib.rs @@ -337,26 +337,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _); -pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -368,7 +348,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -383,8 +362,7 @@ embassy_extras::peripherals!( PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, I2C5, PWR, RNG, SDMMC1, SDMMC2, - SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, - TIM2, TIM23, TIM24, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h730vb.rs b/embassy-stm32/src/pac/stm32h730vb.rs index 0bf0bea17..d7c86ac32 100644 --- a/embassy-stm32/src/pac/stm32h730vb.rs +++ b/embassy-stm32/src/pac/stm32h730vb.rs @@ -326,26 +326,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _); -pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -357,7 +337,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -372,8 +351,7 @@ embassy_extras::peripherals!( PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, I2C5, PWR, RNG, SDMMC1, SDMMC2, - SPI1, SPI2, SPI3, SPI4, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM23, TIM24, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI1, SPI2, SPI3, SPI4, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h730zb.rs b/embassy-stm32/src/pac/stm32h730zb.rs index 9087f9234..9fc4c1fd6 100644 --- a/embassy-stm32/src/pac/stm32h730zb.rs +++ b/embassy-stm32/src/pac/stm32h730zb.rs @@ -337,26 +337,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _); -pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -368,7 +348,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -383,8 +362,7 @@ embassy_extras::peripherals!( PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, I2C5, PWR, RNG, SDMMC1, SDMMC2, - SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, - TIM2, TIM23, TIM24, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h733vg.rs b/embassy-stm32/src/pac/stm32h733vg.rs index 0bf0bea17..d7c86ac32 100644 --- a/embassy-stm32/src/pac/stm32h733vg.rs +++ b/embassy-stm32/src/pac/stm32h733vg.rs @@ -326,26 +326,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _); -pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -357,7 +337,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -372,8 +351,7 @@ embassy_extras::peripherals!( PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, I2C5, PWR, RNG, SDMMC1, SDMMC2, - SPI1, SPI2, SPI3, SPI4, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM23, TIM24, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI1, SPI2, SPI3, SPI4, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h733zg.rs b/embassy-stm32/src/pac/stm32h733zg.rs index 9087f9234..9fc4c1fd6 100644 --- a/embassy-stm32/src/pac/stm32h733zg.rs +++ b/embassy-stm32/src/pac/stm32h733zg.rs @@ -337,26 +337,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _); -pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -368,7 +348,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -383,8 +362,7 @@ embassy_extras::peripherals!( PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, I2C5, PWR, RNG, SDMMC1, SDMMC2, - SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, - TIM2, TIM23, TIM24, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h735ag.rs b/embassy-stm32/src/pac/stm32h735ag.rs index 9087f9234..9fc4c1fd6 100644 --- a/embassy-stm32/src/pac/stm32h735ag.rs +++ b/embassy-stm32/src/pac/stm32h735ag.rs @@ -337,26 +337,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _); -pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -368,7 +348,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -383,8 +362,7 @@ embassy_extras::peripherals!( PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, I2C5, PWR, RNG, SDMMC1, SDMMC2, - SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, - TIM2, TIM23, TIM24, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h735ig.rs b/embassy-stm32/src/pac/stm32h735ig.rs index 9087f9234..9fc4c1fd6 100644 --- a/embassy-stm32/src/pac/stm32h735ig.rs +++ b/embassy-stm32/src/pac/stm32h735ig.rs @@ -337,26 +337,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _); -pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -368,7 +348,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -383,8 +362,7 @@ embassy_extras::peripherals!( PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, I2C5, PWR, RNG, SDMMC1, SDMMC2, - SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, - TIM2, TIM23, TIM24, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h735rg.rs b/embassy-stm32/src/pac/stm32h735rg.rs index da11c7f5f..bae83aec0 100644 --- a/embassy-stm32/src/pac/stm32h735rg.rs +++ b/embassy-stm32/src/pac/stm32h735rg.rs @@ -310,26 +310,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _); -pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -341,7 +321,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -356,8 +335,7 @@ embassy_extras::peripherals!( PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM23, TIM24, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h735vg.rs b/embassy-stm32/src/pac/stm32h735vg.rs index 0bf0bea17..d7c86ac32 100644 --- a/embassy-stm32/src/pac/stm32h735vg.rs +++ b/embassy-stm32/src/pac/stm32h735vg.rs @@ -326,26 +326,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _); -pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -357,7 +337,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -372,8 +351,7 @@ embassy_extras::peripherals!( PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, I2C5, PWR, RNG, SDMMC1, SDMMC2, - SPI1, SPI2, SPI3, SPI4, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM23, TIM24, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI1, SPI2, SPI3, SPI4, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h735zg.rs b/embassy-stm32/src/pac/stm32h735zg.rs index 9087f9234..9fc4c1fd6 100644 --- a/embassy-stm32/src/pac/stm32h735zg.rs +++ b/embassy-stm32/src/pac/stm32h735zg.rs @@ -337,26 +337,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _); -pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -368,7 +348,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -383,8 +362,7 @@ embassy_extras::peripherals!( PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, I2C5, PWR, RNG, SDMMC1, SDMMC2, - SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, - TIM2, TIM23, TIM24, TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h742ag.rs b/embassy-stm32/src/pac/stm32h742ag.rs index 297ee70a4..61fac469a 100644 --- a/embassy-stm32/src/pac/stm32h742ag.rs +++ b/embassy-stm32/src/pac/stm32h742ag.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h742ai.rs b/embassy-stm32/src/pac/stm32h742ai.rs index 297ee70a4..61fac469a 100644 --- a/embassy-stm32/src/pac/stm32h742ai.rs +++ b/embassy-stm32/src/pac/stm32h742ai.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h742bg.rs b/embassy-stm32/src/pac/stm32h742bg.rs index 297ee70a4..61fac469a 100644 --- a/embassy-stm32/src/pac/stm32h742bg.rs +++ b/embassy-stm32/src/pac/stm32h742bg.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h742bi.rs b/embassy-stm32/src/pac/stm32h742bi.rs index 297ee70a4..61fac469a 100644 --- a/embassy-stm32/src/pac/stm32h742bi.rs +++ b/embassy-stm32/src/pac/stm32h742bi.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h742ig.rs b/embassy-stm32/src/pac/stm32h742ig.rs index 297ee70a4..61fac469a 100644 --- a/embassy-stm32/src/pac/stm32h742ig.rs +++ b/embassy-stm32/src/pac/stm32h742ig.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h742ii.rs b/embassy-stm32/src/pac/stm32h742ii.rs index 297ee70a4..61fac469a 100644 --- a/embassy-stm32/src/pac/stm32h742ii.rs +++ b/embassy-stm32/src/pac/stm32h742ii.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h742vg.rs b/embassy-stm32/src/pac/stm32h742vg.rs index 4ffa0ddd8..ab99bd65f 100644 --- a/embassy-stm32/src/pac/stm32h742vg.rs +++ b/embassy-stm32/src/pac/stm32h742vg.rs @@ -321,24 +321,6 @@ impl_spi_pin!(SPI4, MisoPin, PE5, 5); impl_spi_pin!(SPI4, MosiPin, PE6, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -351,7 +333,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -367,8 +348,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h742vi.rs b/embassy-stm32/src/pac/stm32h742vi.rs index 4ffa0ddd8..ab99bd65f 100644 --- a/embassy-stm32/src/pac/stm32h742vi.rs +++ b/embassy-stm32/src/pac/stm32h742vi.rs @@ -321,24 +321,6 @@ impl_spi_pin!(SPI4, MisoPin, PE5, 5); impl_spi_pin!(SPI4, MosiPin, PE6, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -351,7 +333,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -367,8 +348,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h742xg.rs b/embassy-stm32/src/pac/stm32h742xg.rs index 297ee70a4..61fac469a 100644 --- a/embassy-stm32/src/pac/stm32h742xg.rs +++ b/embassy-stm32/src/pac/stm32h742xg.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h742xi.rs b/embassy-stm32/src/pac/stm32h742xi.rs index 297ee70a4..61fac469a 100644 --- a/embassy-stm32/src/pac/stm32h742xi.rs +++ b/embassy-stm32/src/pac/stm32h742xi.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h742zg.rs b/embassy-stm32/src/pac/stm32h742zg.rs index 297ee70a4..61fac469a 100644 --- a/embassy-stm32/src/pac/stm32h742zg.rs +++ b/embassy-stm32/src/pac/stm32h742zg.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h742zi.rs b/embassy-stm32/src/pac/stm32h742zi.rs index 297ee70a4..61fac469a 100644 --- a/embassy-stm32/src/pac/stm32h742zi.rs +++ b/embassy-stm32/src/pac/stm32h742zi.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h743ag.rs b/embassy-stm32/src/pac/stm32h743ag.rs index 9f82a0471..c1162ba73 100644 --- a/embassy-stm32/src/pac/stm32h743ag.rs +++ b/embassy-stm32/src/pac/stm32h743ag.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h743ai.rs b/embassy-stm32/src/pac/stm32h743ai.rs index 9f82a0471..c1162ba73 100644 --- a/embassy-stm32/src/pac/stm32h743ai.rs +++ b/embassy-stm32/src/pac/stm32h743ai.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h743bg.rs b/embassy-stm32/src/pac/stm32h743bg.rs index 9f82a0471..c1162ba73 100644 --- a/embassy-stm32/src/pac/stm32h743bg.rs +++ b/embassy-stm32/src/pac/stm32h743bg.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h743bi.rs b/embassy-stm32/src/pac/stm32h743bi.rs index 9f82a0471..c1162ba73 100644 --- a/embassy-stm32/src/pac/stm32h743bi.rs +++ b/embassy-stm32/src/pac/stm32h743bi.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h743ig.rs b/embassy-stm32/src/pac/stm32h743ig.rs index 9f82a0471..c1162ba73 100644 --- a/embassy-stm32/src/pac/stm32h743ig.rs +++ b/embassy-stm32/src/pac/stm32h743ig.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h743ii.rs b/embassy-stm32/src/pac/stm32h743ii.rs index 9f82a0471..c1162ba73 100644 --- a/embassy-stm32/src/pac/stm32h743ii.rs +++ b/embassy-stm32/src/pac/stm32h743ii.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h743vg.rs b/embassy-stm32/src/pac/stm32h743vg.rs index 639acece7..4aa964866 100644 --- a/embassy-stm32/src/pac/stm32h743vg.rs +++ b/embassy-stm32/src/pac/stm32h743vg.rs @@ -321,24 +321,6 @@ impl_spi_pin!(SPI4, MisoPin, PE5, 5); impl_spi_pin!(SPI4, MosiPin, PE6, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -351,7 +333,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -367,8 +348,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h743vi.rs b/embassy-stm32/src/pac/stm32h743vi.rs index 639acece7..4aa964866 100644 --- a/embassy-stm32/src/pac/stm32h743vi.rs +++ b/embassy-stm32/src/pac/stm32h743vi.rs @@ -321,24 +321,6 @@ impl_spi_pin!(SPI4, MisoPin, PE5, 5); impl_spi_pin!(SPI4, MosiPin, PE6, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -351,7 +333,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -367,8 +348,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h743xg.rs b/embassy-stm32/src/pac/stm32h743xg.rs index 9f82a0471..c1162ba73 100644 --- a/embassy-stm32/src/pac/stm32h743xg.rs +++ b/embassy-stm32/src/pac/stm32h743xg.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h743xi.rs b/embassy-stm32/src/pac/stm32h743xi.rs index 9f82a0471..c1162ba73 100644 --- a/embassy-stm32/src/pac/stm32h743xi.rs +++ b/embassy-stm32/src/pac/stm32h743xi.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h743zg.rs b/embassy-stm32/src/pac/stm32h743zg.rs index 9f82a0471..c1162ba73 100644 --- a/embassy-stm32/src/pac/stm32h743zg.rs +++ b/embassy-stm32/src/pac/stm32h743zg.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h743zi.rs b/embassy-stm32/src/pac/stm32h743zi.rs index 9f82a0471..c1162ba73 100644 --- a/embassy-stm32/src/pac/stm32h743zi.rs +++ b/embassy-stm32/src/pac/stm32h743zi.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h745bg.rs b/embassy-stm32/src/pac/stm32h745bg.rs index 78781fc0f..259e34ed7 100644 --- a/embassy-stm32/src/pac/stm32h745bg.rs +++ b/embassy-stm32/src/pac/stm32h745bg.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h745bi.rs b/embassy-stm32/src/pac/stm32h745bi.rs index 78781fc0f..259e34ed7 100644 --- a/embassy-stm32/src/pac/stm32h745bi.rs +++ b/embassy-stm32/src/pac/stm32h745bi.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h745ig.rs b/embassy-stm32/src/pac/stm32h745ig.rs index 78781fc0f..259e34ed7 100644 --- a/embassy-stm32/src/pac/stm32h745ig.rs +++ b/embassy-stm32/src/pac/stm32h745ig.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h745ii.rs b/embassy-stm32/src/pac/stm32h745ii.rs index 78781fc0f..259e34ed7 100644 --- a/embassy-stm32/src/pac/stm32h745ii.rs +++ b/embassy-stm32/src/pac/stm32h745ii.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h745xg.rs b/embassy-stm32/src/pac/stm32h745xg.rs index 78781fc0f..259e34ed7 100644 --- a/embassy-stm32/src/pac/stm32h745xg.rs +++ b/embassy-stm32/src/pac/stm32h745xg.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h745xi.rs b/embassy-stm32/src/pac/stm32h745xi.rs index 78781fc0f..259e34ed7 100644 --- a/embassy-stm32/src/pac/stm32h745xi.rs +++ b/embassy-stm32/src/pac/stm32h745xi.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h745zg.rs b/embassy-stm32/src/pac/stm32h745zg.rs index 78781fc0f..259e34ed7 100644 --- a/embassy-stm32/src/pac/stm32h745zg.rs +++ b/embassy-stm32/src/pac/stm32h745zg.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h745zi.rs b/embassy-stm32/src/pac/stm32h745zi.rs index 78781fc0f..259e34ed7 100644 --- a/embassy-stm32/src/pac/stm32h745zi.rs +++ b/embassy-stm32/src/pac/stm32h745zi.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h747ag.rs b/embassy-stm32/src/pac/stm32h747ag.rs index 867267c96..ed397bf6d 100644 --- a/embassy-stm32/src/pac/stm32h747ag.rs +++ b/embassy-stm32/src/pac/stm32h747ag.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h747ai.rs b/embassy-stm32/src/pac/stm32h747ai.rs index 867267c96..ed397bf6d 100644 --- a/embassy-stm32/src/pac/stm32h747ai.rs +++ b/embassy-stm32/src/pac/stm32h747ai.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h747bg.rs b/embassy-stm32/src/pac/stm32h747bg.rs index 867267c96..ed397bf6d 100644 --- a/embassy-stm32/src/pac/stm32h747bg.rs +++ b/embassy-stm32/src/pac/stm32h747bg.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h747bi.rs b/embassy-stm32/src/pac/stm32h747bi.rs index 867267c96..ed397bf6d 100644 --- a/embassy-stm32/src/pac/stm32h747bi.rs +++ b/embassy-stm32/src/pac/stm32h747bi.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h747ig.rs b/embassy-stm32/src/pac/stm32h747ig.rs index 867267c96..ed397bf6d 100644 --- a/embassy-stm32/src/pac/stm32h747ig.rs +++ b/embassy-stm32/src/pac/stm32h747ig.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h747ii.rs b/embassy-stm32/src/pac/stm32h747ii.rs index 867267c96..ed397bf6d 100644 --- a/embassy-stm32/src/pac/stm32h747ii.rs +++ b/embassy-stm32/src/pac/stm32h747ii.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h747xg.rs b/embassy-stm32/src/pac/stm32h747xg.rs index 867267c96..ed397bf6d 100644 --- a/embassy-stm32/src/pac/stm32h747xg.rs +++ b/embassy-stm32/src/pac/stm32h747xg.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h747xi.rs b/embassy-stm32/src/pac/stm32h747xi.rs index 867267c96..ed397bf6d 100644 --- a/embassy-stm32/src/pac/stm32h747xi.rs +++ b/embassy-stm32/src/pac/stm32h747xi.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h747zi.rs b/embassy-stm32/src/pac/stm32h747zi.rs index e0d9870cf..a830d2d53 100644 --- a/embassy-stm32/src/pac/stm32h747zi.rs +++ b/embassy-stm32/src/pac/stm32h747zi.rs @@ -321,24 +321,6 @@ impl_spi_pin!(SPI4, MisoPin, PE5, 5); impl_spi_pin!(SPI4, MosiPin, PE6, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -351,7 +333,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -367,8 +348,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h750ib.rs b/embassy-stm32/src/pac/stm32h750ib.rs index 43054b9ca..67be74e7c 100644 --- a/embassy-stm32/src/pac/stm32h750ib.rs +++ b/embassy-stm32/src/pac/stm32h750ib.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h750vb.rs b/embassy-stm32/src/pac/stm32h750vb.rs index a1bb27236..b6ec37027 100644 --- a/embassy-stm32/src/pac/stm32h750vb.rs +++ b/embassy-stm32/src/pac/stm32h750vb.rs @@ -321,24 +321,6 @@ impl_spi_pin!(SPI4, MisoPin, PE5, 5); impl_spi_pin!(SPI4, MosiPin, PE6, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -351,7 +333,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -367,8 +348,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h750xb.rs b/embassy-stm32/src/pac/stm32h750xb.rs index 43054b9ca..67be74e7c 100644 --- a/embassy-stm32/src/pac/stm32h750xb.rs +++ b/embassy-stm32/src/pac/stm32h750xb.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h750zb.rs b/embassy-stm32/src/pac/stm32h750zb.rs index 43054b9ca..67be74e7c 100644 --- a/embassy-stm32/src/pac/stm32h750zb.rs +++ b/embassy-stm32/src/pac/stm32h750zb.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h753ai.rs b/embassy-stm32/src/pac/stm32h753ai.rs index 43054b9ca..67be74e7c 100644 --- a/embassy-stm32/src/pac/stm32h753ai.rs +++ b/embassy-stm32/src/pac/stm32h753ai.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h753bi.rs b/embassy-stm32/src/pac/stm32h753bi.rs index 43054b9ca..67be74e7c 100644 --- a/embassy-stm32/src/pac/stm32h753bi.rs +++ b/embassy-stm32/src/pac/stm32h753bi.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h753ii.rs b/embassy-stm32/src/pac/stm32h753ii.rs index 43054b9ca..67be74e7c 100644 --- a/embassy-stm32/src/pac/stm32h753ii.rs +++ b/embassy-stm32/src/pac/stm32h753ii.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h753vi.rs b/embassy-stm32/src/pac/stm32h753vi.rs index a1bb27236..b6ec37027 100644 --- a/embassy-stm32/src/pac/stm32h753vi.rs +++ b/embassy-stm32/src/pac/stm32h753vi.rs @@ -321,24 +321,6 @@ impl_spi_pin!(SPI4, MisoPin, PE5, 5); impl_spi_pin!(SPI4, MosiPin, PE6, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -351,7 +333,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -367,8 +348,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h753xi.rs b/embassy-stm32/src/pac/stm32h753xi.rs index 43054b9ca..67be74e7c 100644 --- a/embassy-stm32/src/pac/stm32h753xi.rs +++ b/embassy-stm32/src/pac/stm32h753xi.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h753zi.rs b/embassy-stm32/src/pac/stm32h753zi.rs index 43054b9ca..67be74e7c 100644 --- a/embassy-stm32/src/pac/stm32h753zi.rs +++ b/embassy-stm32/src/pac/stm32h753zi.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h755bi.rs b/embassy-stm32/src/pac/stm32h755bi.rs index 86684fea3..316c62bcf 100644 --- a/embassy-stm32/src/pac/stm32h755bi.rs +++ b/embassy-stm32/src/pac/stm32h755bi.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h755ii.rs b/embassy-stm32/src/pac/stm32h755ii.rs index 86684fea3..316c62bcf 100644 --- a/embassy-stm32/src/pac/stm32h755ii.rs +++ b/embassy-stm32/src/pac/stm32h755ii.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h755xi.rs b/embassy-stm32/src/pac/stm32h755xi.rs index 86684fea3..316c62bcf 100644 --- a/embassy-stm32/src/pac/stm32h755xi.rs +++ b/embassy-stm32/src/pac/stm32h755xi.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h755zi.rs b/embassy-stm32/src/pac/stm32h755zi.rs index 86684fea3..316c62bcf 100644 --- a/embassy-stm32/src/pac/stm32h755zi.rs +++ b/embassy-stm32/src/pac/stm32h755zi.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h757ai.rs b/embassy-stm32/src/pac/stm32h757ai.rs index 4b98532bb..e3fe0cfb5 100644 --- a/embassy-stm32/src/pac/stm32h757ai.rs +++ b/embassy-stm32/src/pac/stm32h757ai.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h757bi.rs b/embassy-stm32/src/pac/stm32h757bi.rs index 4b98532bb..e3fe0cfb5 100644 --- a/embassy-stm32/src/pac/stm32h757bi.rs +++ b/embassy-stm32/src/pac/stm32h757bi.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h757ii.rs b/embassy-stm32/src/pac/stm32h757ii.rs index 4b98532bb..e3fe0cfb5 100644 --- a/embassy-stm32/src/pac/stm32h757ii.rs +++ b/embassy-stm32/src/pac/stm32h757ii.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h757xi.rs b/embassy-stm32/src/pac/stm32h757xi.rs index 4b98532bb..e3fe0cfb5 100644 --- a/embassy-stm32/src/pac/stm32h757xi.rs +++ b/embassy-stm32/src/pac/stm32h757xi.rs @@ -332,24 +332,6 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5); impl_spi_pin!(SPI5, SckPin, PK0, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -362,7 +344,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -378,8 +359,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, - TIM3, TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h757zi.rs b/embassy-stm32/src/pac/stm32h757zi.rs index b587f110d..682fd38eb 100644 --- a/embassy-stm32/src/pac/stm32h757zi.rs +++ b/embassy-stm32/src/pac/stm32h757zi.rs @@ -321,24 +321,6 @@ impl_spi_pin!(SPI4, MisoPin, PE5, 5); impl_spi_pin!(SPI4, MosiPin, PE6, 5); pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -351,7 +333,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -367,8 +348,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RCC, RNG, SDMMC1, SDMMC2, SPI1, - SPI2, SPI3, SPI4, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8 + SPI2, SPI3, SPI4, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h7a3ag.rs b/embassy-stm32/src/pac/stm32h7a3ag.rs index a8f57edaf..f5bfc4ace 100644 --- a/embassy-stm32/src/pac/stm32h7a3ag.rs +++ b/embassy-stm32/src/pac/stm32h7a3ag.rs @@ -349,24 +349,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -378,7 +360,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -394,8 +375,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, SPI2, - SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8 + SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h7a3ai.rs b/embassy-stm32/src/pac/stm32h7a3ai.rs index a8f57edaf..f5bfc4ace 100644 --- a/embassy-stm32/src/pac/stm32h7a3ai.rs +++ b/embassy-stm32/src/pac/stm32h7a3ai.rs @@ -349,24 +349,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -378,7 +360,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -394,8 +375,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, SPI2, - SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8 + SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h7a3ig.rs b/embassy-stm32/src/pac/stm32h7a3ig.rs index a8f57edaf..f5bfc4ace 100644 --- a/embassy-stm32/src/pac/stm32h7a3ig.rs +++ b/embassy-stm32/src/pac/stm32h7a3ig.rs @@ -349,24 +349,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -378,7 +360,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -394,8 +375,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, SPI2, - SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8 + SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h7a3ii.rs b/embassy-stm32/src/pac/stm32h7a3ii.rs index a8f57edaf..f5bfc4ace 100644 --- a/embassy-stm32/src/pac/stm32h7a3ii.rs +++ b/embassy-stm32/src/pac/stm32h7a3ii.rs @@ -349,24 +349,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -378,7 +360,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -394,8 +375,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, SPI2, - SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8 + SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h7a3lg.rs b/embassy-stm32/src/pac/stm32h7a3lg.rs index a8f57edaf..f5bfc4ace 100644 --- a/embassy-stm32/src/pac/stm32h7a3lg.rs +++ b/embassy-stm32/src/pac/stm32h7a3lg.rs @@ -349,24 +349,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -378,7 +360,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -394,8 +375,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, SPI2, - SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8 + SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h7a3li.rs b/embassy-stm32/src/pac/stm32h7a3li.rs index a8f57edaf..f5bfc4ace 100644 --- a/embassy-stm32/src/pac/stm32h7a3li.rs +++ b/embassy-stm32/src/pac/stm32h7a3li.rs @@ -349,24 +349,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -378,7 +360,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -394,8 +375,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, SPI2, - SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8 + SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h7a3ng.rs b/embassy-stm32/src/pac/stm32h7a3ng.rs index a8f57edaf..f5bfc4ace 100644 --- a/embassy-stm32/src/pac/stm32h7a3ng.rs +++ b/embassy-stm32/src/pac/stm32h7a3ng.rs @@ -349,24 +349,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -378,7 +360,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -394,8 +375,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, SPI2, - SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8 + SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h7a3ni.rs b/embassy-stm32/src/pac/stm32h7a3ni.rs index a8f57edaf..f5bfc4ace 100644 --- a/embassy-stm32/src/pac/stm32h7a3ni.rs +++ b/embassy-stm32/src/pac/stm32h7a3ni.rs @@ -349,24 +349,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -378,7 +360,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -394,8 +375,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, SPI2, - SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8 + SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h7a3qi.rs b/embassy-stm32/src/pac/stm32h7a3qi.rs index ddedfc164..61f719c69 100644 --- a/embassy-stm32/src/pac/stm32h7a3qi.rs +++ b/embassy-stm32/src/pac/stm32h7a3qi.rs @@ -338,24 +338,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -367,7 +349,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -383,8 +364,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, SPI2, - SPI3, SPI4, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + SPI3, SPI4, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h7a3rg.rs b/embassy-stm32/src/pac/stm32h7a3rg.rs index 7fcdda23b..98193a344 100644 --- a/embassy-stm32/src/pac/stm32h7a3rg.rs +++ b/embassy-stm32/src/pac/stm32h7a3rg.rs @@ -322,24 +322,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -351,7 +333,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -367,8 +348,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, SPI2, SPI3, - SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8 + SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h7a3ri.rs b/embassy-stm32/src/pac/stm32h7a3ri.rs index 7fcdda23b..98193a344 100644 --- a/embassy-stm32/src/pac/stm32h7a3ri.rs +++ b/embassy-stm32/src/pac/stm32h7a3ri.rs @@ -322,24 +322,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -351,7 +333,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -367,8 +348,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, SPI2, SPI3, - SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8 + SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h7a3vg.rs b/embassy-stm32/src/pac/stm32h7a3vg.rs index ddedfc164..61f719c69 100644 --- a/embassy-stm32/src/pac/stm32h7a3vg.rs +++ b/embassy-stm32/src/pac/stm32h7a3vg.rs @@ -338,24 +338,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -367,7 +349,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -383,8 +364,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, SPI2, - SPI3, SPI4, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + SPI3, SPI4, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h7a3vi.rs b/embassy-stm32/src/pac/stm32h7a3vi.rs index ddedfc164..61f719c69 100644 --- a/embassy-stm32/src/pac/stm32h7a3vi.rs +++ b/embassy-stm32/src/pac/stm32h7a3vi.rs @@ -338,24 +338,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -367,7 +349,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -383,8 +364,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, SPI2, - SPI3, SPI4, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + SPI3, SPI4, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h7a3zg.rs b/embassy-stm32/src/pac/stm32h7a3zg.rs index a8f57edaf..f5bfc4ace 100644 --- a/embassy-stm32/src/pac/stm32h7a3zg.rs +++ b/embassy-stm32/src/pac/stm32h7a3zg.rs @@ -349,24 +349,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -378,7 +360,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -394,8 +375,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, SPI2, - SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8 + SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h7a3zi.rs b/embassy-stm32/src/pac/stm32h7a3zi.rs index a8f57edaf..f5bfc4ace 100644 --- a/embassy-stm32/src/pac/stm32h7a3zi.rs +++ b/embassy-stm32/src/pac/stm32h7a3zi.rs @@ -349,24 +349,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -378,7 +360,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -394,8 +375,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, SPI2, - SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8 + SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h7b0ab.rs b/embassy-stm32/src/pac/stm32h7b0ab.rs index 1e4e650a1..815c4414f 100644 --- a/embassy-stm32/src/pac/stm32h7b0ab.rs +++ b/embassy-stm32/src/pac/stm32h7b0ab.rs @@ -349,24 +349,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -378,7 +360,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -394,8 +375,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, SPI2, - SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8 + SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h7b0ib.rs b/embassy-stm32/src/pac/stm32h7b0ib.rs index 1e4e650a1..815c4414f 100644 --- a/embassy-stm32/src/pac/stm32h7b0ib.rs +++ b/embassy-stm32/src/pac/stm32h7b0ib.rs @@ -349,24 +349,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -378,7 +360,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -394,8 +375,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, SPI2, - SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8 + SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h7b0rb.rs b/embassy-stm32/src/pac/stm32h7b0rb.rs index 288222e05..1c57ffd80 100644 --- a/embassy-stm32/src/pac/stm32h7b0rb.rs +++ b/embassy-stm32/src/pac/stm32h7b0rb.rs @@ -322,24 +322,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -351,7 +333,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -367,8 +348,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, SPI2, SPI3, - SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8 + SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h7b0vb.rs b/embassy-stm32/src/pac/stm32h7b0vb.rs index 2c7178bf9..f9ef389f3 100644 --- a/embassy-stm32/src/pac/stm32h7b0vb.rs +++ b/embassy-stm32/src/pac/stm32h7b0vb.rs @@ -338,24 +338,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -367,7 +349,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -383,8 +364,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, SPI2, - SPI3, SPI4, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + SPI3, SPI4, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h7b0zb.rs b/embassy-stm32/src/pac/stm32h7b0zb.rs index 1e4e650a1..815c4414f 100644 --- a/embassy-stm32/src/pac/stm32h7b0zb.rs +++ b/embassy-stm32/src/pac/stm32h7b0zb.rs @@ -349,24 +349,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -378,7 +360,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -394,8 +375,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, SPI2, - SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8 + SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h7b3ai.rs b/embassy-stm32/src/pac/stm32h7b3ai.rs index 1e4e650a1..815c4414f 100644 --- a/embassy-stm32/src/pac/stm32h7b3ai.rs +++ b/embassy-stm32/src/pac/stm32h7b3ai.rs @@ -349,24 +349,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -378,7 +360,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -394,8 +375,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, SPI2, - SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8 + SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h7b3ii.rs b/embassy-stm32/src/pac/stm32h7b3ii.rs index 1e4e650a1..815c4414f 100644 --- a/embassy-stm32/src/pac/stm32h7b3ii.rs +++ b/embassy-stm32/src/pac/stm32h7b3ii.rs @@ -349,24 +349,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -378,7 +360,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -394,8 +375,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, SPI2, - SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8 + SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h7b3li.rs b/embassy-stm32/src/pac/stm32h7b3li.rs index 1e4e650a1..815c4414f 100644 --- a/embassy-stm32/src/pac/stm32h7b3li.rs +++ b/embassy-stm32/src/pac/stm32h7b3li.rs @@ -349,24 +349,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -378,7 +360,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -394,8 +375,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, SPI2, - SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8 + SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h7b3ni.rs b/embassy-stm32/src/pac/stm32h7b3ni.rs index 1e4e650a1..815c4414f 100644 --- a/embassy-stm32/src/pac/stm32h7b3ni.rs +++ b/embassy-stm32/src/pac/stm32h7b3ni.rs @@ -349,24 +349,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -378,7 +360,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -394,8 +375,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, SPI2, - SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8 + SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h7b3qi.rs b/embassy-stm32/src/pac/stm32h7b3qi.rs index 2c7178bf9..f9ef389f3 100644 --- a/embassy-stm32/src/pac/stm32h7b3qi.rs +++ b/embassy-stm32/src/pac/stm32h7b3qi.rs @@ -338,24 +338,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -367,7 +349,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -383,8 +364,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, SPI2, - SPI3, SPI4, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + SPI3, SPI4, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h7b3ri.rs b/embassy-stm32/src/pac/stm32h7b3ri.rs index 288222e05..1c57ffd80 100644 --- a/embassy-stm32/src/pac/stm32h7b3ri.rs +++ b/embassy-stm32/src/pac/stm32h7b3ri.rs @@ -322,24 +322,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -351,7 +333,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -367,8 +348,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, SPI2, SPI3, - SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8 + SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h7b3vi.rs b/embassy-stm32/src/pac/stm32h7b3vi.rs index 2c7178bf9..f9ef389f3 100644 --- a/embassy-stm32/src/pac/stm32h7b3vi.rs +++ b/embassy-stm32/src/pac/stm32h7b3vi.rs @@ -338,24 +338,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -367,7 +349,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -383,8 +364,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, SPI2, - SPI3, SPI4, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + SPI3, SPI4, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32h7b3zi.rs b/embassy-stm32/src/pac/stm32h7b3zi.rs index 1e4e650a1..815c4414f 100644 --- a/embassy-stm32/src/pac/stm32h7b3zi.rs +++ b/embassy-stm32/src/pac/stm32h7b3zi.rs @@ -349,24 +349,6 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5); impl_spi_pin!(SPI6, SckPin, PG13, 5); impl_spi_pin!(SPI6, MosiPin, PG14, 5); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _); -pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _); -pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _); -pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _); pub use super::regs::dbgmcu_h7 as dbgmcu; pub use super::regs::dma_v2 as dma; pub use super::regs::exti_v1 as exti; @@ -378,7 +360,6 @@ pub use super::regs::rng_v1 as rng; pub use super::regs::sdmmc_v2 as sdmmc; pub use super::regs::spi_v3 as spi; pub use super::regs::syscfg_h7 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DBGMCU, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, @@ -394,8 +375,7 @@ embassy_extras::peripherals!( PI8, PI9, PI10, PI11, PI12, PI13, PI14, PI15, PJ0, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7, PJ8, PJ9, PJ10, PJ11, PJ12, PJ13, PJ14, PJ15, PK0, PK1, PK2, PK3, PK4, PK5, PK6, PK7, PK8, PK9, PK10, PK11, PK12, PK13, PK14, PK15, I2C1, I2C2, I2C3, I2C4, PWR, RNG, SDMMC1, SDMMC2, SPI1, SPI2, - SPI3, SPI4, SPI5, SPI6, SYSCFG, TIM1, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17, TIM2, TIM3, - TIM4, TIM5, TIM6, TIM7, TIM8 + SPI3, SPI4, SPI5, SPI6, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l010c6.rs b/embassy-stm32/src/pac/stm32l010c6.rs index 02c7e94b2..74693fa50 100644 --- a/embassy-stm32/src/pac/stm32l010c6.rs +++ b/embassy-stm32/src/pac/stm32l010c6.rs @@ -85,9 +85,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -109,7 +106,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -117,8 +113,8 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PH0, PH1, - PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, - TIM21, USART2 + PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l010f4.rs b/embassy-stm32/src/pac/stm32l010f4.rs index 3502edb2e..a8d708726 100644 --- a/embassy-stm32/src/pac/stm32l010f4.rs +++ b/embassy-stm32/src/pac/stm32l010f4.rs @@ -68,9 +68,6 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14); impl_gpio_pin!(PC15, 2, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -92,7 +89,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -100,7 +96,7 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, RCC, - SYSCFG, TIM2, TIM21, USART2 + SYSCFG, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l010k4.rs b/embassy-stm32/src/pac/stm32l010k4.rs index 3502edb2e..a8d708726 100644 --- a/embassy-stm32/src/pac/stm32l010k4.rs +++ b/embassy-stm32/src/pac/stm32l010k4.rs @@ -68,9 +68,6 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14); impl_gpio_pin!(PC15, 2, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -92,7 +89,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -100,7 +96,7 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, RCC, - SYSCFG, TIM2, TIM21, USART2 + SYSCFG, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l010k8.rs b/embassy-stm32/src/pac/stm32l010k8.rs index 099da97e6..0dadd62d0 100644 --- a/embassy-stm32/src/pac/stm32l010k8.rs +++ b/embassy-stm32/src/pac/stm32l010k8.rs @@ -102,9 +102,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -119,7 +116,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -128,8 +124,7 @@ embassy_extras::peripherals!( PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, - PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, TIM21, - USART2 + PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l010r8.rs b/embassy-stm32/src/pac/stm32l010r8.rs index 099da97e6..0dadd62d0 100644 --- a/embassy-stm32/src/pac/stm32l010r8.rs +++ b/embassy-stm32/src/pac/stm32l010r8.rs @@ -102,9 +102,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -119,7 +116,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -128,8 +124,7 @@ embassy_extras::peripherals!( PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, - PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, TIM21, - USART2 + PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l010rb.rs b/embassy-stm32/src/pac/stm32l010rb.rs index 095ce776b..e68122c62 100644 --- a/embassy-stm32/src/pac/stm32l010rb.rs +++ b/embassy-stm32/src/pac/stm32l010rb.rs @@ -119,10 +119,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -137,7 +133,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -147,8 +142,7 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, TIM21, TIM22, - USART2 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l011d3.rs b/embassy-stm32/src/pac/stm32l011d3.rs index 4d4313d80..d0cc305e4 100644 --- a/embassy-stm32/src/pac/stm32l011d3.rs +++ b/embassy-stm32/src/pac/stm32l011d3.rs @@ -68,9 +68,6 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14); impl_gpio_pin!(PC15, 2, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -92,7 +89,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -100,7 +96,7 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, RCC, - SYSCFG, TIM2, TIM21, USART2 + SYSCFG, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l011d4.rs b/embassy-stm32/src/pac/stm32l011d4.rs index 4d4313d80..d0cc305e4 100644 --- a/embassy-stm32/src/pac/stm32l011d4.rs +++ b/embassy-stm32/src/pac/stm32l011d4.rs @@ -68,9 +68,6 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14); impl_gpio_pin!(PC15, 2, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -92,7 +89,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -100,7 +96,7 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, RCC, - SYSCFG, TIM2, TIM21, USART2 + SYSCFG, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l011e3.rs b/embassy-stm32/src/pac/stm32l011e3.rs index 4d4313d80..d0cc305e4 100644 --- a/embassy-stm32/src/pac/stm32l011e3.rs +++ b/embassy-stm32/src/pac/stm32l011e3.rs @@ -68,9 +68,6 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14); impl_gpio_pin!(PC15, 2, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -92,7 +89,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -100,7 +96,7 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, RCC, - SYSCFG, TIM2, TIM21, USART2 + SYSCFG, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l011e4.rs b/embassy-stm32/src/pac/stm32l011e4.rs index 4d4313d80..d0cc305e4 100644 --- a/embassy-stm32/src/pac/stm32l011e4.rs +++ b/embassy-stm32/src/pac/stm32l011e4.rs @@ -68,9 +68,6 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14); impl_gpio_pin!(PC15, 2, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -92,7 +89,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -100,7 +96,7 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, RCC, - SYSCFG, TIM2, TIM21, USART2 + SYSCFG, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l011f3.rs b/embassy-stm32/src/pac/stm32l011f3.rs index 4d4313d80..d0cc305e4 100644 --- a/embassy-stm32/src/pac/stm32l011f3.rs +++ b/embassy-stm32/src/pac/stm32l011f3.rs @@ -68,9 +68,6 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14); impl_gpio_pin!(PC15, 2, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -92,7 +89,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -100,7 +96,7 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, RCC, - SYSCFG, TIM2, TIM21, USART2 + SYSCFG, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l011f4.rs b/embassy-stm32/src/pac/stm32l011f4.rs index 4d4313d80..d0cc305e4 100644 --- a/embassy-stm32/src/pac/stm32l011f4.rs +++ b/embassy-stm32/src/pac/stm32l011f4.rs @@ -68,9 +68,6 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14); impl_gpio_pin!(PC15, 2, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -92,7 +89,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -100,7 +96,7 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, RCC, - SYSCFG, TIM2, TIM21, USART2 + SYSCFG, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l011g3.rs b/embassy-stm32/src/pac/stm32l011g3.rs index 4d4313d80..d0cc305e4 100644 --- a/embassy-stm32/src/pac/stm32l011g3.rs +++ b/embassy-stm32/src/pac/stm32l011g3.rs @@ -68,9 +68,6 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14); impl_gpio_pin!(PC15, 2, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -92,7 +89,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -100,7 +96,7 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, RCC, - SYSCFG, TIM2, TIM21, USART2 + SYSCFG, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l011g4.rs b/embassy-stm32/src/pac/stm32l011g4.rs index 4d4313d80..d0cc305e4 100644 --- a/embassy-stm32/src/pac/stm32l011g4.rs +++ b/embassy-stm32/src/pac/stm32l011g4.rs @@ -68,9 +68,6 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14); impl_gpio_pin!(PC15, 2, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -92,7 +89,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -100,7 +96,7 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, RCC, - SYSCFG, TIM2, TIM21, USART2 + SYSCFG, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l011k3.rs b/embassy-stm32/src/pac/stm32l011k3.rs index 4d4313d80..d0cc305e4 100644 --- a/embassy-stm32/src/pac/stm32l011k3.rs +++ b/embassy-stm32/src/pac/stm32l011k3.rs @@ -68,9 +68,6 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14); impl_gpio_pin!(PC15, 2, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -92,7 +89,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -100,7 +96,7 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, RCC, - SYSCFG, TIM2, TIM21, USART2 + SYSCFG, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l011k4.rs b/embassy-stm32/src/pac/stm32l011k4.rs index 4d4313d80..d0cc305e4 100644 --- a/embassy-stm32/src/pac/stm32l011k4.rs +++ b/embassy-stm32/src/pac/stm32l011k4.rs @@ -68,9 +68,6 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14); impl_gpio_pin!(PC15, 2, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -92,7 +89,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -100,7 +96,7 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, RCC, - SYSCFG, TIM2, TIM21, USART2 + SYSCFG, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l021d4.rs b/embassy-stm32/src/pac/stm32l021d4.rs index 0e172f8f1..c1ec65301 100644 --- a/embassy-stm32/src/pac/stm32l021d4.rs +++ b/embassy-stm32/src/pac/stm32l021d4.rs @@ -68,9 +68,6 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14); impl_gpio_pin!(PC15, 2, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -92,7 +89,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -100,7 +96,7 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, RCC, - SYSCFG, TIM2, TIM21, USART2 + SYSCFG, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l021f4.rs b/embassy-stm32/src/pac/stm32l021f4.rs index 0e172f8f1..c1ec65301 100644 --- a/embassy-stm32/src/pac/stm32l021f4.rs +++ b/embassy-stm32/src/pac/stm32l021f4.rs @@ -68,9 +68,6 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14); impl_gpio_pin!(PC15, 2, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -92,7 +89,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -100,7 +96,7 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, RCC, - SYSCFG, TIM2, TIM21, USART2 + SYSCFG, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l021g4.rs b/embassy-stm32/src/pac/stm32l021g4.rs index 0e172f8f1..c1ec65301 100644 --- a/embassy-stm32/src/pac/stm32l021g4.rs +++ b/embassy-stm32/src/pac/stm32l021g4.rs @@ -68,9 +68,6 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14); impl_gpio_pin!(PC15, 2, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -92,7 +89,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -100,7 +96,7 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, RCC, - SYSCFG, TIM2, TIM21, USART2 + SYSCFG, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l021k4.rs b/embassy-stm32/src/pac/stm32l021k4.rs index 0e172f8f1..c1ec65301 100644 --- a/embassy-stm32/src/pac/stm32l021k4.rs +++ b/embassy-stm32/src/pac/stm32l021k4.rs @@ -68,9 +68,6 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14); impl_gpio_pin!(PC15, 2, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -92,7 +89,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -100,7 +96,7 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, RCC, - SYSCFG, TIM2, TIM21, USART2 + SYSCFG, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l031c4.rs b/embassy-stm32/src/pac/stm32l031c4.rs index 5a4d78031..d07f9d5cd 100644 --- a/embassy-stm32/src/pac/stm32l031c4.rs +++ b/embassy-stm32/src/pac/stm32l031c4.rs @@ -85,10 +85,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -110,7 +106,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -118,8 +113,8 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PH0, PH1, - PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, - TIM21, TIM22, USART2 + PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l031c6.rs b/embassy-stm32/src/pac/stm32l031c6.rs index 5a4d78031..d07f9d5cd 100644 --- a/embassy-stm32/src/pac/stm32l031c6.rs +++ b/embassy-stm32/src/pac/stm32l031c6.rs @@ -85,10 +85,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -110,7 +106,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -118,8 +113,8 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PH0, PH1, - PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, - TIM21, TIM22, USART2 + PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l031e4.rs b/embassy-stm32/src/pac/stm32l031e4.rs index 5a4d78031..d07f9d5cd 100644 --- a/embassy-stm32/src/pac/stm32l031e4.rs +++ b/embassy-stm32/src/pac/stm32l031e4.rs @@ -85,10 +85,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -110,7 +106,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -118,8 +113,8 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PH0, PH1, - PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, - TIM21, TIM22, USART2 + PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l031e6.rs b/embassy-stm32/src/pac/stm32l031e6.rs index 5a4d78031..d07f9d5cd 100644 --- a/embassy-stm32/src/pac/stm32l031e6.rs +++ b/embassy-stm32/src/pac/stm32l031e6.rs @@ -85,10 +85,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -110,7 +106,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -118,8 +113,8 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PH0, PH1, - PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, - TIM21, TIM22, USART2 + PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l031f4.rs b/embassy-stm32/src/pac/stm32l031f4.rs index 5a4d78031..d07f9d5cd 100644 --- a/embassy-stm32/src/pac/stm32l031f4.rs +++ b/embassy-stm32/src/pac/stm32l031f4.rs @@ -85,10 +85,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -110,7 +106,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -118,8 +113,8 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PH0, PH1, - PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, - TIM21, TIM22, USART2 + PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l031f6.rs b/embassy-stm32/src/pac/stm32l031f6.rs index 5a4d78031..d07f9d5cd 100644 --- a/embassy-stm32/src/pac/stm32l031f6.rs +++ b/embassy-stm32/src/pac/stm32l031f6.rs @@ -85,10 +85,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -110,7 +106,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -118,8 +113,8 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PH0, PH1, - PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, - TIM21, TIM22, USART2 + PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l031g4.rs b/embassy-stm32/src/pac/stm32l031g4.rs index 5a4d78031..d07f9d5cd 100644 --- a/embassy-stm32/src/pac/stm32l031g4.rs +++ b/embassy-stm32/src/pac/stm32l031g4.rs @@ -85,10 +85,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -110,7 +106,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -118,8 +113,8 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PH0, PH1, - PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, - TIM21, TIM22, USART2 + PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l031g6.rs b/embassy-stm32/src/pac/stm32l031g6.rs index 5a4d78031..d07f9d5cd 100644 --- a/embassy-stm32/src/pac/stm32l031g6.rs +++ b/embassy-stm32/src/pac/stm32l031g6.rs @@ -85,10 +85,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -110,7 +106,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -118,8 +113,8 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PH0, PH1, - PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, - TIM21, TIM22, USART2 + PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l031k4.rs b/embassy-stm32/src/pac/stm32l031k4.rs index 5a4d78031..d07f9d5cd 100644 --- a/embassy-stm32/src/pac/stm32l031k4.rs +++ b/embassy-stm32/src/pac/stm32l031k4.rs @@ -85,10 +85,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -110,7 +106,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -118,8 +113,8 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PH0, PH1, - PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, - TIM21, TIM22, USART2 + PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l031k6.rs b/embassy-stm32/src/pac/stm32l031k6.rs index 5a4d78031..d07f9d5cd 100644 --- a/embassy-stm32/src/pac/stm32l031k6.rs +++ b/embassy-stm32/src/pac/stm32l031k6.rs @@ -85,10 +85,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -110,7 +106,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -118,8 +113,8 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PH0, PH1, - PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, - TIM21, TIM22, USART2 + PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l041c4.rs b/embassy-stm32/src/pac/stm32l041c4.rs index 81f9979a0..707230956 100644 --- a/embassy-stm32/src/pac/stm32l041c4.rs +++ b/embassy-stm32/src/pac/stm32l041c4.rs @@ -85,10 +85,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -110,7 +106,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -118,8 +113,8 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PH0, PH1, - PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, - TIM21, TIM22, USART2 + PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l041c6.rs b/embassy-stm32/src/pac/stm32l041c6.rs index 81f9979a0..707230956 100644 --- a/embassy-stm32/src/pac/stm32l041c6.rs +++ b/embassy-stm32/src/pac/stm32l041c6.rs @@ -85,10 +85,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -110,7 +106,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -118,8 +113,8 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PH0, PH1, - PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, - TIM21, TIM22, USART2 + PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l041e6.rs b/embassy-stm32/src/pac/stm32l041e6.rs index 81f9979a0..707230956 100644 --- a/embassy-stm32/src/pac/stm32l041e6.rs +++ b/embassy-stm32/src/pac/stm32l041e6.rs @@ -85,10 +85,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -110,7 +106,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -118,8 +113,8 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PH0, PH1, - PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, - TIM21, TIM22, USART2 + PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l041f6.rs b/embassy-stm32/src/pac/stm32l041f6.rs index 81f9979a0..707230956 100644 --- a/embassy-stm32/src/pac/stm32l041f6.rs +++ b/embassy-stm32/src/pac/stm32l041f6.rs @@ -85,10 +85,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -110,7 +106,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -118,8 +113,8 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PH0, PH1, - PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, - TIM21, TIM22, USART2 + PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l041g6.rs b/embassy-stm32/src/pac/stm32l041g6.rs index 81f9979a0..707230956 100644 --- a/embassy-stm32/src/pac/stm32l041g6.rs +++ b/embassy-stm32/src/pac/stm32l041g6.rs @@ -85,10 +85,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -110,7 +106,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -118,8 +113,8 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PH0, PH1, - PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, - TIM21, TIM22, USART2 + PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l041k6.rs b/embassy-stm32/src/pac/stm32l041k6.rs index 81f9979a0..707230956 100644 --- a/embassy-stm32/src/pac/stm32l041k6.rs +++ b/embassy-stm32/src/pac/stm32l041k6.rs @@ -85,10 +85,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); pub const USART2: usart::Usart = usart::Usart(0x40004400 as _); impl_usart!(USART2); impl_usart_pin!(USART2, CtsPin, PA0, 4); @@ -110,7 +106,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -118,8 +113,8 @@ embassy_extras::peripherals!( DMA1_CH7, EXTI, PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PH0, PH1, - PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, - TIM21, TIM22, USART2 + PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l051c6.rs b/embassy-stm32/src/pac/stm32l051c6.rs index a0ebca0a7..0400bf512 100644 --- a/embassy-stm32/src/pac/stm32l051c6.rs +++ b/embassy-stm32/src/pac/stm32l051c6.rs @@ -102,11 +102,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -128,7 +123,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -137,8 +131,7 @@ embassy_extras::peripherals!( PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, - PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, TIM21, - TIM22, TIM6, USART1, USART2 + PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, USART1, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l051c8.rs b/embassy-stm32/src/pac/stm32l051c8.rs index a0ebca0a7..0400bf512 100644 --- a/embassy-stm32/src/pac/stm32l051c8.rs +++ b/embassy-stm32/src/pac/stm32l051c8.rs @@ -102,11 +102,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -128,7 +123,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -137,8 +131,7 @@ embassy_extras::peripherals!( PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, - PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, TIM21, - TIM22, TIM6, USART1, USART2 + PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, USART1, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l051k6.rs b/embassy-stm32/src/pac/stm32l051k6.rs index a0ebca0a7..0400bf512 100644 --- a/embassy-stm32/src/pac/stm32l051k6.rs +++ b/embassy-stm32/src/pac/stm32l051k6.rs @@ -102,11 +102,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -128,7 +123,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -137,8 +131,7 @@ embassy_extras::peripherals!( PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, - PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, TIM21, - TIM22, TIM6, USART1, USART2 + PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, USART1, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l051k8.rs b/embassy-stm32/src/pac/stm32l051k8.rs index a0ebca0a7..0400bf512 100644 --- a/embassy-stm32/src/pac/stm32l051k8.rs +++ b/embassy-stm32/src/pac/stm32l051k8.rs @@ -102,11 +102,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -128,7 +123,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -137,8 +131,7 @@ embassy_extras::peripherals!( PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, - PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, TIM21, - TIM22, TIM6, USART1, USART2 + PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, USART1, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l051r6.rs b/embassy-stm32/src/pac/stm32l051r6.rs index a0ebca0a7..0400bf512 100644 --- a/embassy-stm32/src/pac/stm32l051r6.rs +++ b/embassy-stm32/src/pac/stm32l051r6.rs @@ -102,11 +102,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -128,7 +123,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -137,8 +131,7 @@ embassy_extras::peripherals!( PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, - PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, TIM21, - TIM22, TIM6, USART1, USART2 + PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, USART1, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l051r8.rs b/embassy-stm32/src/pac/stm32l051r8.rs index a0ebca0a7..0400bf512 100644 --- a/embassy-stm32/src/pac/stm32l051r8.rs +++ b/embassy-stm32/src/pac/stm32l051r8.rs @@ -102,11 +102,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -128,7 +123,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -137,8 +131,7 @@ embassy_extras::peripherals!( PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, - PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, TIM21, - TIM22, TIM6, USART1, USART2 + PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, USART1, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l051t6.rs b/embassy-stm32/src/pac/stm32l051t6.rs index a0ebca0a7..0400bf512 100644 --- a/embassy-stm32/src/pac/stm32l051t6.rs +++ b/embassy-stm32/src/pac/stm32l051t6.rs @@ -102,11 +102,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -128,7 +123,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -137,8 +131,7 @@ embassy_extras::peripherals!( PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, - PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, TIM21, - TIM22, TIM6, USART1, USART2 + PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, USART1, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l051t8.rs b/embassy-stm32/src/pac/stm32l051t8.rs index a0ebca0a7..0400bf512 100644 --- a/embassy-stm32/src/pac/stm32l051t8.rs +++ b/embassy-stm32/src/pac/stm32l051t8.rs @@ -102,11 +102,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -128,7 +123,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -137,8 +131,7 @@ embassy_extras::peripherals!( PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, - PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, TIM21, - TIM22, TIM6, USART1, USART2 + PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, USART1, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l052c6.rs b/embassy-stm32/src/pac/stm32l052c6.rs index 242c6263d..c0ccd4535 100644 --- a/embassy-stm32/src/pac/stm32l052c6.rs +++ b/embassy-stm32/src/pac/stm32l052c6.rs @@ -104,11 +104,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -131,7 +126,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -140,8 +134,8 @@ embassy_extras::peripherals!( PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, - PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, - TIM21, TIM22, TIM6, USART1, USART2 + PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l052c8.rs b/embassy-stm32/src/pac/stm32l052c8.rs index 242c6263d..c0ccd4535 100644 --- a/embassy-stm32/src/pac/stm32l052c8.rs +++ b/embassy-stm32/src/pac/stm32l052c8.rs @@ -104,11 +104,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -131,7 +126,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -140,8 +134,8 @@ embassy_extras::peripherals!( PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, - PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, - TIM21, TIM22, TIM6, USART1, USART2 + PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l052k6.rs b/embassy-stm32/src/pac/stm32l052k6.rs index 242c6263d..c0ccd4535 100644 --- a/embassy-stm32/src/pac/stm32l052k6.rs +++ b/embassy-stm32/src/pac/stm32l052k6.rs @@ -104,11 +104,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -131,7 +126,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -140,8 +134,8 @@ embassy_extras::peripherals!( PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, - PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, - TIM21, TIM22, TIM6, USART1, USART2 + PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l052k8.rs b/embassy-stm32/src/pac/stm32l052k8.rs index 242c6263d..c0ccd4535 100644 --- a/embassy-stm32/src/pac/stm32l052k8.rs +++ b/embassy-stm32/src/pac/stm32l052k8.rs @@ -104,11 +104,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -131,7 +126,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -140,8 +134,8 @@ embassy_extras::peripherals!( PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, - PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, - TIM21, TIM22, TIM6, USART1, USART2 + PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l052r6.rs b/embassy-stm32/src/pac/stm32l052r6.rs index 242c6263d..c0ccd4535 100644 --- a/embassy-stm32/src/pac/stm32l052r6.rs +++ b/embassy-stm32/src/pac/stm32l052r6.rs @@ -104,11 +104,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -131,7 +126,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -140,8 +134,8 @@ embassy_extras::peripherals!( PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, - PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, - TIM21, TIM22, TIM6, USART1, USART2 + PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l052r8.rs b/embassy-stm32/src/pac/stm32l052r8.rs index 242c6263d..c0ccd4535 100644 --- a/embassy-stm32/src/pac/stm32l052r8.rs +++ b/embassy-stm32/src/pac/stm32l052r8.rs @@ -104,11 +104,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -131,7 +126,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -140,8 +134,8 @@ embassy_extras::peripherals!( PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, - PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, - TIM21, TIM22, TIM6, USART1, USART2 + PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l052t6.rs b/embassy-stm32/src/pac/stm32l052t6.rs index 242c6263d..c0ccd4535 100644 --- a/embassy-stm32/src/pac/stm32l052t6.rs +++ b/embassy-stm32/src/pac/stm32l052t6.rs @@ -104,11 +104,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -131,7 +126,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -140,8 +134,8 @@ embassy_extras::peripherals!( PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, - PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, - TIM21, TIM22, TIM6, USART1, USART2 + PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l052t8.rs b/embassy-stm32/src/pac/stm32l052t8.rs index 242c6263d..c0ccd4535 100644 --- a/embassy-stm32/src/pac/stm32l052t8.rs +++ b/embassy-stm32/src/pac/stm32l052t8.rs @@ -104,11 +104,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -131,7 +126,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -140,8 +134,8 @@ embassy_extras::peripherals!( PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, - PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, - TIM21, TIM22, TIM6, USART1, USART2 + PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l053c6.rs b/embassy-stm32/src/pac/stm32l053c6.rs index ddb7f3b38..23df40476 100644 --- a/embassy-stm32/src/pac/stm32l053c6.rs +++ b/embassy-stm32/src/pac/stm32l053c6.rs @@ -104,11 +104,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -131,7 +126,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -140,8 +134,8 @@ embassy_extras::peripherals!( PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, - PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, - TIM21, TIM22, TIM6, USART1, USART2 + PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l053c8.rs b/embassy-stm32/src/pac/stm32l053c8.rs index ddb7f3b38..23df40476 100644 --- a/embassy-stm32/src/pac/stm32l053c8.rs +++ b/embassy-stm32/src/pac/stm32l053c8.rs @@ -104,11 +104,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -131,7 +126,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -140,8 +134,8 @@ embassy_extras::peripherals!( PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, - PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, - TIM21, TIM22, TIM6, USART1, USART2 + PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l053r6.rs b/embassy-stm32/src/pac/stm32l053r6.rs index ddb7f3b38..23df40476 100644 --- a/embassy-stm32/src/pac/stm32l053r6.rs +++ b/embassy-stm32/src/pac/stm32l053r6.rs @@ -104,11 +104,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -131,7 +126,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -140,8 +134,8 @@ embassy_extras::peripherals!( PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, - PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, - TIM21, TIM22, TIM6, USART1, USART2 + PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l053r8.rs b/embassy-stm32/src/pac/stm32l053r8.rs index ddb7f3b38..23df40476 100644 --- a/embassy-stm32/src/pac/stm32l053r8.rs +++ b/embassy-stm32/src/pac/stm32l053r8.rs @@ -104,11 +104,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -131,7 +126,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -140,8 +134,8 @@ embassy_extras::peripherals!( PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, - PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, - TIM21, TIM22, TIM6, USART1, USART2 + PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l062c8.rs b/embassy-stm32/src/pac/stm32l062c8.rs index 9047e5279..4a6c0eefa 100644 --- a/embassy-stm32/src/pac/stm32l062c8.rs +++ b/embassy-stm32/src/pac/stm32l062c8.rs @@ -104,11 +104,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, AES_RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -131,7 +126,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -140,8 +134,8 @@ embassy_extras::peripherals!( PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, - PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, - TIM21, TIM22, TIM6, USART1, USART2 + PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l062k8.rs b/embassy-stm32/src/pac/stm32l062k8.rs index 9047e5279..4a6c0eefa 100644 --- a/embassy-stm32/src/pac/stm32l062k8.rs +++ b/embassy-stm32/src/pac/stm32l062k8.rs @@ -104,11 +104,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, AES_RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -131,7 +126,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -140,8 +134,8 @@ embassy_extras::peripherals!( PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, - PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, - TIM21, TIM22, TIM6, USART1, USART2 + PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l063c8.rs b/embassy-stm32/src/pac/stm32l063c8.rs index d6d13e29e..32d267331 100644 --- a/embassy-stm32/src/pac/stm32l063c8.rs +++ b/embassy-stm32/src/pac/stm32l063c8.rs @@ -104,11 +104,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, AES_RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -131,7 +126,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -140,8 +134,8 @@ embassy_extras::peripherals!( PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, - PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, - TIM21, TIM22, TIM6, USART1, USART2 + PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l063r8.rs b/embassy-stm32/src/pac/stm32l063r8.rs index d6d13e29e..32d267331 100644 --- a/embassy-stm32/src/pac/stm32l063r8.rs +++ b/embassy-stm32/src/pac/stm32l063r8.rs @@ -104,11 +104,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, AES_RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -131,7 +126,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -140,8 +134,8 @@ embassy_extras::peripherals!( PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, - PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, - TIM21, TIM22, TIM6, USART1, USART2 + PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l071c8.rs b/embassy-stm32/src/pac/stm32l071c8.rs index caab31c4a..dffaabe3d 100644 --- a/embassy-stm32/src/pac/stm32l071c8.rs +++ b/embassy-stm32/src/pac/stm32l071c8.rs @@ -119,14 +119,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -174,7 +166,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -184,8 +175,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, TIM21, TIM22, TIM3, - TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, USART1, USART2, USART4, + USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l071cb.rs b/embassy-stm32/src/pac/stm32l071cb.rs index caab31c4a..dffaabe3d 100644 --- a/embassy-stm32/src/pac/stm32l071cb.rs +++ b/embassy-stm32/src/pac/stm32l071cb.rs @@ -119,14 +119,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -174,7 +166,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -184,8 +175,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, TIM21, TIM22, TIM3, - TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, USART1, USART2, USART4, + USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l071cz.rs b/embassy-stm32/src/pac/stm32l071cz.rs index caab31c4a..dffaabe3d 100644 --- a/embassy-stm32/src/pac/stm32l071cz.rs +++ b/embassy-stm32/src/pac/stm32l071cz.rs @@ -119,14 +119,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -174,7 +166,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -184,8 +175,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, TIM21, TIM22, TIM3, - TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, USART1, USART2, USART4, + USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l071k8.rs b/embassy-stm32/src/pac/stm32l071k8.rs index 770a5eb93..7222da76e 100644 --- a/embassy-stm32/src/pac/stm32l071k8.rs +++ b/embassy-stm32/src/pac/stm32l071k8.rs @@ -119,14 +119,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -162,7 +154,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -172,8 +163,7 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, TIM21, TIM22, TIM3, - TIM6, TIM7, USART1, USART2, USART4 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, USART1, USART2, USART4 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l071kb.rs b/embassy-stm32/src/pac/stm32l071kb.rs index caab31c4a..dffaabe3d 100644 --- a/embassy-stm32/src/pac/stm32l071kb.rs +++ b/embassy-stm32/src/pac/stm32l071kb.rs @@ -119,14 +119,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -174,7 +166,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -184,8 +175,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, TIM21, TIM22, TIM3, - TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, USART1, USART2, USART4, + USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l071kz.rs b/embassy-stm32/src/pac/stm32l071kz.rs index caab31c4a..dffaabe3d 100644 --- a/embassy-stm32/src/pac/stm32l071kz.rs +++ b/embassy-stm32/src/pac/stm32l071kz.rs @@ -119,14 +119,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -174,7 +166,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -184,8 +175,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, TIM21, TIM22, TIM3, - TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, USART1, USART2, USART4, + USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l071rb.rs b/embassy-stm32/src/pac/stm32l071rb.rs index caab31c4a..dffaabe3d 100644 --- a/embassy-stm32/src/pac/stm32l071rb.rs +++ b/embassy-stm32/src/pac/stm32l071rb.rs @@ -119,14 +119,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -174,7 +166,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -184,8 +175,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, TIM21, TIM22, TIM3, - TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, USART1, USART2, USART4, + USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l071rz.rs b/embassy-stm32/src/pac/stm32l071rz.rs index caab31c4a..dffaabe3d 100644 --- a/embassy-stm32/src/pac/stm32l071rz.rs +++ b/embassy-stm32/src/pac/stm32l071rz.rs @@ -119,14 +119,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -174,7 +166,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -184,8 +175,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, TIM21, TIM22, TIM3, - TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, USART1, USART2, USART4, + USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l071v8.rs b/embassy-stm32/src/pac/stm32l071v8.rs index caab31c4a..dffaabe3d 100644 --- a/embassy-stm32/src/pac/stm32l071v8.rs +++ b/embassy-stm32/src/pac/stm32l071v8.rs @@ -119,14 +119,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -174,7 +166,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -184,8 +175,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, TIM21, TIM22, TIM3, - TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, USART1, USART2, USART4, + USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l071vb.rs b/embassy-stm32/src/pac/stm32l071vb.rs index caab31c4a..dffaabe3d 100644 --- a/embassy-stm32/src/pac/stm32l071vb.rs +++ b/embassy-stm32/src/pac/stm32l071vb.rs @@ -119,14 +119,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -174,7 +166,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -184,8 +175,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, TIM21, TIM22, TIM3, - TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, USART1, USART2, USART4, + USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l071vz.rs b/embassy-stm32/src/pac/stm32l071vz.rs index caab31c4a..dffaabe3d 100644 --- a/embassy-stm32/src/pac/stm32l071vz.rs +++ b/embassy-stm32/src/pac/stm32l071vz.rs @@ -119,14 +119,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -174,7 +166,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -184,8 +175,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, TIM21, TIM22, TIM3, - TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, USART1, USART2, USART4, + USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l072cb.rs b/embassy-stm32/src/pac/stm32l072cb.rs index 91b171fce..265a22203 100644 --- a/embassy-stm32/src/pac/stm32l072cb.rs +++ b/embassy-stm32/src/pac/stm32l072cb.rs @@ -121,14 +121,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -177,7 +169,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -187,8 +178,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, TIM21, TIM22, - TIM3, TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, USART2, + USART4, USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l072cz.rs b/embassy-stm32/src/pac/stm32l072cz.rs index 91b171fce..265a22203 100644 --- a/embassy-stm32/src/pac/stm32l072cz.rs +++ b/embassy-stm32/src/pac/stm32l072cz.rs @@ -121,14 +121,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -177,7 +169,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -187,8 +178,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, TIM21, TIM22, - TIM3, TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, USART2, + USART4, USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l072kb.rs b/embassy-stm32/src/pac/stm32l072kb.rs index 91b171fce..265a22203 100644 --- a/embassy-stm32/src/pac/stm32l072kb.rs +++ b/embassy-stm32/src/pac/stm32l072kb.rs @@ -121,14 +121,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -177,7 +169,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -187,8 +178,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, TIM21, TIM22, - TIM3, TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, USART2, + USART4, USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l072kz.rs b/embassy-stm32/src/pac/stm32l072kz.rs index 91b171fce..265a22203 100644 --- a/embassy-stm32/src/pac/stm32l072kz.rs +++ b/embassy-stm32/src/pac/stm32l072kz.rs @@ -121,14 +121,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -177,7 +169,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -187,8 +178,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, TIM21, TIM22, - TIM3, TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, USART2, + USART4, USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l072rb.rs b/embassy-stm32/src/pac/stm32l072rb.rs index 91b171fce..265a22203 100644 --- a/embassy-stm32/src/pac/stm32l072rb.rs +++ b/embassy-stm32/src/pac/stm32l072rb.rs @@ -121,14 +121,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -177,7 +169,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -187,8 +178,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, TIM21, TIM22, - TIM3, TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, USART2, + USART4, USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l072rz.rs b/embassy-stm32/src/pac/stm32l072rz.rs index 91b171fce..265a22203 100644 --- a/embassy-stm32/src/pac/stm32l072rz.rs +++ b/embassy-stm32/src/pac/stm32l072rz.rs @@ -121,14 +121,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -177,7 +169,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -187,8 +178,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, TIM21, TIM22, - TIM3, TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, USART2, + USART4, USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l072v8.rs b/embassy-stm32/src/pac/stm32l072v8.rs index 91b171fce..265a22203 100644 --- a/embassy-stm32/src/pac/stm32l072v8.rs +++ b/embassy-stm32/src/pac/stm32l072v8.rs @@ -121,14 +121,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -177,7 +169,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -187,8 +178,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, TIM21, TIM22, - TIM3, TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, USART2, + USART4, USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l072vb.rs b/embassy-stm32/src/pac/stm32l072vb.rs index 91b171fce..265a22203 100644 --- a/embassy-stm32/src/pac/stm32l072vb.rs +++ b/embassy-stm32/src/pac/stm32l072vb.rs @@ -121,14 +121,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -177,7 +169,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -187,8 +178,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, TIM21, TIM22, - TIM3, TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, USART2, + USART4, USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l072vz.rs b/embassy-stm32/src/pac/stm32l072vz.rs index 91b171fce..265a22203 100644 --- a/embassy-stm32/src/pac/stm32l072vz.rs +++ b/embassy-stm32/src/pac/stm32l072vz.rs @@ -121,14 +121,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -177,7 +169,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -187,8 +178,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, TIM21, TIM22, - TIM3, TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, USART2, + USART4, USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l073cb.rs b/embassy-stm32/src/pac/stm32l073cb.rs index 9744943c8..7936268cf 100644 --- a/embassy-stm32/src/pac/stm32l073cb.rs +++ b/embassy-stm32/src/pac/stm32l073cb.rs @@ -121,14 +121,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -177,7 +169,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -187,8 +178,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, TIM21, TIM22, - TIM3, TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, USART2, + USART4, USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l073cz.rs b/embassy-stm32/src/pac/stm32l073cz.rs index 9744943c8..7936268cf 100644 --- a/embassy-stm32/src/pac/stm32l073cz.rs +++ b/embassy-stm32/src/pac/stm32l073cz.rs @@ -121,14 +121,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -177,7 +169,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -187,8 +178,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, TIM21, TIM22, - TIM3, TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, USART2, + USART4, USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l073rb.rs b/embassy-stm32/src/pac/stm32l073rb.rs index 9744943c8..7936268cf 100644 --- a/embassy-stm32/src/pac/stm32l073rb.rs +++ b/embassy-stm32/src/pac/stm32l073rb.rs @@ -121,14 +121,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -177,7 +169,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -187,8 +178,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, TIM21, TIM22, - TIM3, TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, USART2, + USART4, USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l073rz.rs b/embassy-stm32/src/pac/stm32l073rz.rs index 9744943c8..7936268cf 100644 --- a/embassy-stm32/src/pac/stm32l073rz.rs +++ b/embassy-stm32/src/pac/stm32l073rz.rs @@ -121,14 +121,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -177,7 +169,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -187,8 +178,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, TIM21, TIM22, - TIM3, TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, USART2, + USART4, USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l073v8.rs b/embassy-stm32/src/pac/stm32l073v8.rs index 9744943c8..7936268cf 100644 --- a/embassy-stm32/src/pac/stm32l073v8.rs +++ b/embassy-stm32/src/pac/stm32l073v8.rs @@ -121,14 +121,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -177,7 +169,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -187,8 +178,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, TIM21, TIM22, - TIM3, TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, USART2, + USART4, USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l073vb.rs b/embassy-stm32/src/pac/stm32l073vb.rs index 9744943c8..7936268cf 100644 --- a/embassy-stm32/src/pac/stm32l073vb.rs +++ b/embassy-stm32/src/pac/stm32l073vb.rs @@ -121,14 +121,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -177,7 +169,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -187,8 +178,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, TIM21, TIM22, - TIM3, TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, USART2, + USART4, USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l073vz.rs b/embassy-stm32/src/pac/stm32l073vz.rs index 9744943c8..7936268cf 100644 --- a/embassy-stm32/src/pac/stm32l073vz.rs +++ b/embassy-stm32/src/pac/stm32l073vz.rs @@ -121,14 +121,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -177,7 +169,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -187,8 +178,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, TIM21, TIM22, - TIM3, TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, USART2, + USART4, USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l081cb.rs b/embassy-stm32/src/pac/stm32l081cb.rs index 51b079da3..3b3d4b0a8 100644 --- a/embassy-stm32/src/pac/stm32l081cb.rs +++ b/embassy-stm32/src/pac/stm32l081cb.rs @@ -119,14 +119,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -174,7 +166,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -184,8 +175,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, TIM21, TIM22, TIM3, - TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, USART1, USART2, USART4, + USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l081cz.rs b/embassy-stm32/src/pac/stm32l081cz.rs index 51b079da3..3b3d4b0a8 100644 --- a/embassy-stm32/src/pac/stm32l081cz.rs +++ b/embassy-stm32/src/pac/stm32l081cz.rs @@ -119,14 +119,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -174,7 +166,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -184,8 +175,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, TIM21, TIM22, TIM3, - TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, USART1, USART2, USART4, + USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l081kz.rs b/embassy-stm32/src/pac/stm32l081kz.rs index 51b079da3..3b3d4b0a8 100644 --- a/embassy-stm32/src/pac/stm32l081kz.rs +++ b/embassy-stm32/src/pac/stm32l081kz.rs @@ -119,14 +119,6 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14); impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -174,7 +166,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -184,8 +175,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, TIM2, TIM21, TIM22, TIM3, - TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, SYSCFG, USART1, USART2, USART4, + USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l082cz.rs b/embassy-stm32/src/pac/stm32l082cz.rs index 0cd052e7d..7de9b7d30 100644 --- a/embassy-stm32/src/pac/stm32l082cz.rs +++ b/embassy-stm32/src/pac/stm32l082cz.rs @@ -121,14 +121,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, AES_RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -177,7 +169,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -187,8 +178,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, TIM21, TIM22, - TIM3, TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, USART2, + USART4, USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l082kb.rs b/embassy-stm32/src/pac/stm32l082kb.rs index 0cd052e7d..7de9b7d30 100644 --- a/embassy-stm32/src/pac/stm32l082kb.rs +++ b/embassy-stm32/src/pac/stm32l082kb.rs @@ -121,14 +121,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, AES_RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -177,7 +169,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -187,8 +178,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, TIM21, TIM22, - TIM3, TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, USART2, + USART4, USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l082kz.rs b/embassy-stm32/src/pac/stm32l082kz.rs index 0cd052e7d..7de9b7d30 100644 --- a/embassy-stm32/src/pac/stm32l082kz.rs +++ b/embassy-stm32/src/pac/stm32l082kz.rs @@ -121,14 +121,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, AES_RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -177,7 +169,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -187,8 +178,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, TIM21, TIM22, - TIM3, TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, USART2, + USART4, USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l083cb.rs b/embassy-stm32/src/pac/stm32l083cb.rs index 0186b1799..e2ebad526 100644 --- a/embassy-stm32/src/pac/stm32l083cb.rs +++ b/embassy-stm32/src/pac/stm32l083cb.rs @@ -121,14 +121,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, AES_RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -177,7 +169,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -187,8 +178,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, TIM21, TIM22, - TIM3, TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, USART2, + USART4, USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l083cz.rs b/embassy-stm32/src/pac/stm32l083cz.rs index 0186b1799..e2ebad526 100644 --- a/embassy-stm32/src/pac/stm32l083cz.rs +++ b/embassy-stm32/src/pac/stm32l083cz.rs @@ -121,14 +121,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, AES_RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -177,7 +169,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -187,8 +178,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, TIM21, TIM22, - TIM3, TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, USART2, + USART4, USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l083rb.rs b/embassy-stm32/src/pac/stm32l083rb.rs index 0186b1799..e2ebad526 100644 --- a/embassy-stm32/src/pac/stm32l083rb.rs +++ b/embassy-stm32/src/pac/stm32l083rb.rs @@ -121,14 +121,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, AES_RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -177,7 +169,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -187,8 +178,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, TIM21, TIM22, - TIM3, TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, USART2, + USART4, USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l083rz.rs b/embassy-stm32/src/pac/stm32l083rz.rs index 0186b1799..e2ebad526 100644 --- a/embassy-stm32/src/pac/stm32l083rz.rs +++ b/embassy-stm32/src/pac/stm32l083rz.rs @@ -121,14 +121,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, AES_RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -177,7 +169,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -187,8 +178,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, TIM21, TIM22, - TIM3, TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, USART2, + USART4, USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l083v8.rs b/embassy-stm32/src/pac/stm32l083v8.rs index 0186b1799..e2ebad526 100644 --- a/embassy-stm32/src/pac/stm32l083v8.rs +++ b/embassy-stm32/src/pac/stm32l083v8.rs @@ -121,14 +121,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, AES_RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -177,7 +169,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -187,8 +178,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, TIM21, TIM22, - TIM3, TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, USART2, + USART4, USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l083vb.rs b/embassy-stm32/src/pac/stm32l083vb.rs index 0186b1799..e2ebad526 100644 --- a/embassy-stm32/src/pac/stm32l083vb.rs +++ b/embassy-stm32/src/pac/stm32l083vb.rs @@ -121,14 +121,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, AES_RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -177,7 +169,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -187,8 +178,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, TIM21, TIM22, - TIM3, TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, USART2, + USART4, USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l083vz.rs b/embassy-stm32/src/pac/stm32l083vz.rs index 0186b1799..e2ebad526 100644 --- a/embassy-stm32/src/pac/stm32l083vz.rs +++ b/embassy-stm32/src/pac/stm32l083vz.rs @@ -121,14 +121,6 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _); pub const RNG: rng::Rng = rng::Rng(0x40025000 as _); impl_rng!(RNG, AES_RNG_LPUART1); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _); -pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 4); @@ -177,7 +169,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rcc_l0 as rcc; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l0 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -187,8 +178,8 @@ embassy_extras::peripherals!( PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, TIM2, TIM21, TIM22, - TIM3, TIM6, TIM7, USART1, USART2, USART4, USART5 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RCC, RNG, SYSCFG, USART1, USART2, + USART4, USART5 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l412c8.rs b/embassy-stm32/src/pac/stm32l412c8.rs index 0abb459f5..cde7692ab 100644 --- a/embassy-stm32/src/pac/stm32l412c8.rs +++ b/embassy-stm32/src/pac/stm32l412c8.rs @@ -112,12 +112,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -160,7 +154,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -170,8 +163,7 @@ embassy_extras::peripherals!( PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, - PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM2, TIM6, - USART1, USART2, USART3 + PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l412cb.rs b/embassy-stm32/src/pac/stm32l412cb.rs index 0abb459f5..cde7692ab 100644 --- a/embassy-stm32/src/pac/stm32l412cb.rs +++ b/embassy-stm32/src/pac/stm32l412cb.rs @@ -112,12 +112,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -160,7 +154,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -170,8 +163,7 @@ embassy_extras::peripherals!( PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, - PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM2, TIM6, - USART1, USART2, USART3 + PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l412k8.rs b/embassy-stm32/src/pac/stm32l412k8.rs index d7b87b63b..a5dbc86af 100644 --- a/embassy-stm32/src/pac/stm32l412k8.rs +++ b/embassy-stm32/src/pac/stm32l412k8.rs @@ -112,12 +112,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -143,7 +137,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -153,8 +146,7 @@ embassy_extras::peripherals!( PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, - PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM2, TIM6, - USART1, USART2 + PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l412kb.rs b/embassy-stm32/src/pac/stm32l412kb.rs index d7b87b63b..a5dbc86af 100644 --- a/embassy-stm32/src/pac/stm32l412kb.rs +++ b/embassy-stm32/src/pac/stm32l412kb.rs @@ -112,12 +112,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -143,7 +137,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -153,8 +146,7 @@ embassy_extras::peripherals!( PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, - PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM2, TIM6, - USART1, USART2 + PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l412r8.rs b/embassy-stm32/src/pac/stm32l412r8.rs index 0abb459f5..cde7692ab 100644 --- a/embassy-stm32/src/pac/stm32l412r8.rs +++ b/embassy-stm32/src/pac/stm32l412r8.rs @@ -112,12 +112,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -160,7 +154,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -170,8 +163,7 @@ embassy_extras::peripherals!( PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, - PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM2, TIM6, - USART1, USART2, USART3 + PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l412rb.rs b/embassy-stm32/src/pac/stm32l412rb.rs index 0abb459f5..cde7692ab 100644 --- a/embassy-stm32/src/pac/stm32l412rb.rs +++ b/embassy-stm32/src/pac/stm32l412rb.rs @@ -112,12 +112,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -160,7 +154,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -170,8 +163,7 @@ embassy_extras::peripherals!( PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, - PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM2, TIM6, - USART1, USART2, USART3 + PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l412t8.rs b/embassy-stm32/src/pac/stm32l412t8.rs index d7b87b63b..a5dbc86af 100644 --- a/embassy-stm32/src/pac/stm32l412t8.rs +++ b/embassy-stm32/src/pac/stm32l412t8.rs @@ -112,12 +112,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -143,7 +137,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -153,8 +146,7 @@ embassy_extras::peripherals!( PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, - PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM2, TIM6, - USART1, USART2 + PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l412tb.rs b/embassy-stm32/src/pac/stm32l412tb.rs index d7b87b63b..a5dbc86af 100644 --- a/embassy-stm32/src/pac/stm32l412tb.rs +++ b/embassy-stm32/src/pac/stm32l412tb.rs @@ -112,12 +112,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -143,7 +137,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -153,8 +146,7 @@ embassy_extras::peripherals!( PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, - PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM2, TIM6, - USART1, USART2 + PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l422cb.rs b/embassy-stm32/src/pac/stm32l422cb.rs index d70622f76..b0ca3b492 100644 --- a/embassy-stm32/src/pac/stm32l422cb.rs +++ b/embassy-stm32/src/pac/stm32l422cb.rs @@ -112,12 +112,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -160,7 +154,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -170,8 +163,7 @@ embassy_extras::peripherals!( PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, - PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM2, TIM6, - USART1, USART2, USART3 + PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l422kb.rs b/embassy-stm32/src/pac/stm32l422kb.rs index 45627d3e6..ef64a933d 100644 --- a/embassy-stm32/src/pac/stm32l422kb.rs +++ b/embassy-stm32/src/pac/stm32l422kb.rs @@ -112,12 +112,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -143,7 +137,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -153,8 +146,7 @@ embassy_extras::peripherals!( PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, - PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM2, TIM6, - USART1, USART2 + PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l422rb.rs b/embassy-stm32/src/pac/stm32l422rb.rs index d70622f76..b0ca3b492 100644 --- a/embassy-stm32/src/pac/stm32l422rb.rs +++ b/embassy-stm32/src/pac/stm32l422rb.rs @@ -112,12 +112,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -160,7 +154,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -170,8 +163,7 @@ embassy_extras::peripherals!( PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, - PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM2, TIM6, - USART1, USART2, USART3 + PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l422tb.rs b/embassy-stm32/src/pac/stm32l422tb.rs index 45627d3e6..ef64a933d 100644 --- a/embassy-stm32/src/pac/stm32l422tb.rs +++ b/embassy-stm32/src/pac/stm32l422tb.rs @@ -112,12 +112,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -143,7 +137,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -153,8 +146,7 @@ embassy_extras::peripherals!( PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, - PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM2, TIM6, - USART1, USART2 + PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l431cb.rs b/embassy-stm32/src/pac/stm32l431cb.rs index f48c66921..2f0dc000d 100644 --- a/embassy-stm32/src/pac/stm32l431cb.rs +++ b/embassy-stm32/src/pac/stm32l431cb.rs @@ -162,13 +162,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -222,7 +215,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -233,8 +225,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM2, - TIM6, TIM7, USART1, USART2, USART3 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l431cc.rs b/embassy-stm32/src/pac/stm32l431cc.rs index f48c66921..2f0dc000d 100644 --- a/embassy-stm32/src/pac/stm32l431cc.rs +++ b/embassy-stm32/src/pac/stm32l431cc.rs @@ -162,13 +162,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -222,7 +215,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -233,8 +225,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM2, - TIM6, TIM7, USART1, USART2, USART3 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l431kb.rs b/embassy-stm32/src/pac/stm32l431kb.rs index bb38368a4..8933e049b 100644 --- a/embassy-stm32/src/pac/stm32l431kb.rs +++ b/embassy-stm32/src/pac/stm32l431kb.rs @@ -151,13 +151,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -189,7 +182,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -200,8 +192,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM2, TIM6, - TIM7, USART1, USART2 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI3, SYSCFG, USART1, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l431kc.rs b/embassy-stm32/src/pac/stm32l431kc.rs index bb38368a4..8933e049b 100644 --- a/embassy-stm32/src/pac/stm32l431kc.rs +++ b/embassy-stm32/src/pac/stm32l431kc.rs @@ -151,13 +151,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -189,7 +182,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -200,8 +192,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM2, TIM6, - TIM7, USART1, USART2 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI3, SYSCFG, USART1, USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l431rb.rs b/embassy-stm32/src/pac/stm32l431rb.rs index f48c66921..2f0dc000d 100644 --- a/embassy-stm32/src/pac/stm32l431rb.rs +++ b/embassy-stm32/src/pac/stm32l431rb.rs @@ -162,13 +162,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -222,7 +215,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -233,8 +225,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM2, - TIM6, TIM7, USART1, USART2, USART3 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l431rc.rs b/embassy-stm32/src/pac/stm32l431rc.rs index f48c66921..2f0dc000d 100644 --- a/embassy-stm32/src/pac/stm32l431rc.rs +++ b/embassy-stm32/src/pac/stm32l431rc.rs @@ -162,13 +162,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -222,7 +215,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -233,8 +225,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM2, - TIM6, TIM7, USART1, USART2, USART3 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l431vc.rs b/embassy-stm32/src/pac/stm32l431vc.rs index f48c66921..2f0dc000d 100644 --- a/embassy-stm32/src/pac/stm32l431vc.rs +++ b/embassy-stm32/src/pac/stm32l431vc.rs @@ -162,13 +162,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -222,7 +215,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -233,8 +225,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM2, - TIM6, TIM7, USART1, USART2, USART3 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l432kb.rs b/embassy-stm32/src/pac/stm32l432kb.rs index 5c527d9d1..7c5671d3b 100644 --- a/embassy-stm32/src/pac/stm32l432kb.rs +++ b/embassy-stm32/src/pac/stm32l432kb.rs @@ -114,13 +114,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -147,7 +140,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -156,8 +148,8 @@ embassy_extras::peripherals!( PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI3, SYSCFG, TIM1, TIM15, - TIM16, TIM2, TIM6, TIM7, USART1, USART2 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI3, SYSCFG, USART1, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l432kc.rs b/embassy-stm32/src/pac/stm32l432kc.rs index 5c527d9d1..7c5671d3b 100644 --- a/embassy-stm32/src/pac/stm32l432kc.rs +++ b/embassy-stm32/src/pac/stm32l432kc.rs @@ -114,13 +114,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -147,7 +140,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -156,8 +148,8 @@ embassy_extras::peripherals!( PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI3, SYSCFG, TIM1, TIM15, - TIM16, TIM2, TIM6, TIM7, USART1, USART2 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI3, SYSCFG, USART1, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l433cb.rs b/embassy-stm32/src/pac/stm32l433cb.rs index 312f9c4bd..06b6eba0e 100644 --- a/embassy-stm32/src/pac/stm32l433cb.rs +++ b/embassy-stm32/src/pac/stm32l433cb.rs @@ -162,13 +162,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -222,7 +215,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -233,8 +225,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM2, - TIM6, TIM7, USART1, USART2, USART3 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l433cc.rs b/embassy-stm32/src/pac/stm32l433cc.rs index 312f9c4bd..06b6eba0e 100644 --- a/embassy-stm32/src/pac/stm32l433cc.rs +++ b/embassy-stm32/src/pac/stm32l433cc.rs @@ -162,13 +162,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -222,7 +215,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -233,8 +225,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM2, - TIM6, TIM7, USART1, USART2, USART3 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l433rb.rs b/embassy-stm32/src/pac/stm32l433rb.rs index 312f9c4bd..06b6eba0e 100644 --- a/embassy-stm32/src/pac/stm32l433rb.rs +++ b/embassy-stm32/src/pac/stm32l433rb.rs @@ -162,13 +162,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -222,7 +215,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -233,8 +225,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM2, - TIM6, TIM7, USART1, USART2, USART3 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l433rc.rs b/embassy-stm32/src/pac/stm32l433rc.rs index 312f9c4bd..06b6eba0e 100644 --- a/embassy-stm32/src/pac/stm32l433rc.rs +++ b/embassy-stm32/src/pac/stm32l433rc.rs @@ -162,13 +162,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -222,7 +215,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -233,8 +225,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM2, - TIM6, TIM7, USART1, USART2, USART3 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l433vc.rs b/embassy-stm32/src/pac/stm32l433vc.rs index 312f9c4bd..06b6eba0e 100644 --- a/embassy-stm32/src/pac/stm32l433vc.rs +++ b/embassy-stm32/src/pac/stm32l433vc.rs @@ -162,13 +162,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -222,7 +215,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -233,8 +225,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM2, - TIM6, TIM7, USART1, USART2, USART3 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l442kc.rs b/embassy-stm32/src/pac/stm32l442kc.rs index ba7110917..f2bc15b35 100644 --- a/embassy-stm32/src/pac/stm32l442kc.rs +++ b/embassy-stm32/src/pac/stm32l442kc.rs @@ -114,13 +114,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -147,7 +140,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -156,8 +148,8 @@ embassy_extras::peripherals!( PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PH0, PH1, PH2, PH3, PH4, PH5, - PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI3, SYSCFG, TIM1, TIM15, - TIM16, TIM2, TIM6, TIM7, USART1, USART2 + PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI3, SYSCFG, USART1, + USART2 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l443cc.rs b/embassy-stm32/src/pac/stm32l443cc.rs index 4798189e6..490bfa7d9 100644 --- a/embassy-stm32/src/pac/stm32l443cc.rs +++ b/embassy-stm32/src/pac/stm32l443cc.rs @@ -162,13 +162,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -222,7 +215,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -233,8 +225,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM2, - TIM6, TIM7, USART1, USART2, USART3 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l443rc.rs b/embassy-stm32/src/pac/stm32l443rc.rs index 4798189e6..490bfa7d9 100644 --- a/embassy-stm32/src/pac/stm32l443rc.rs +++ b/embassy-stm32/src/pac/stm32l443rc.rs @@ -162,13 +162,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -222,7 +215,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -233,8 +225,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM2, - TIM6, TIM7, USART1, USART2, USART3 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l443vc.rs b/embassy-stm32/src/pac/stm32l443vc.rs index 4798189e6..490bfa7d9 100644 --- a/embassy-stm32/src/pac/stm32l443vc.rs +++ b/embassy-stm32/src/pac/stm32l443vc.rs @@ -162,13 +162,6 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6); impl_spi_pin!(SPI3, MisoPin, PC11, 6); impl_spi_pin!(SPI3, MosiPin, PC12, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -222,7 +215,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -233,8 +225,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM2, - TIM6, TIM7, USART1, USART2, USART3 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l451cc.rs b/embassy-stm32/src/pac/stm32l451cc.rs index 038be6845..fc936321a 100644 --- a/embassy-stm32/src/pac/stm32l451cc.rs +++ b/embassy-stm32/src/pac/stm32l451cc.rs @@ -129,14 +129,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -189,7 +181,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -200,8 +191,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM2, TIM3, TIM6, USART1, - USART2, USART3 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l451ce.rs b/embassy-stm32/src/pac/stm32l451ce.rs index 038be6845..fc936321a 100644 --- a/embassy-stm32/src/pac/stm32l451ce.rs +++ b/embassy-stm32/src/pac/stm32l451ce.rs @@ -129,14 +129,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -189,7 +181,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -200,8 +191,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM2, TIM3, TIM6, USART1, - USART2, USART3 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l451rc.rs b/embassy-stm32/src/pac/stm32l451rc.rs index 038be6845..fc936321a 100644 --- a/embassy-stm32/src/pac/stm32l451rc.rs +++ b/embassy-stm32/src/pac/stm32l451rc.rs @@ -129,14 +129,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -189,7 +181,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -200,8 +191,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM2, TIM3, TIM6, USART1, - USART2, USART3 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l451re.rs b/embassy-stm32/src/pac/stm32l451re.rs index 038be6845..fc936321a 100644 --- a/embassy-stm32/src/pac/stm32l451re.rs +++ b/embassy-stm32/src/pac/stm32l451re.rs @@ -129,14 +129,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -189,7 +181,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -200,8 +191,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM2, TIM3, TIM6, USART1, - USART2, USART3 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l451vc.rs b/embassy-stm32/src/pac/stm32l451vc.rs index 038be6845..fc936321a 100644 --- a/embassy-stm32/src/pac/stm32l451vc.rs +++ b/embassy-stm32/src/pac/stm32l451vc.rs @@ -129,14 +129,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -189,7 +181,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -200,8 +191,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM2, TIM3, TIM6, USART1, - USART2, USART3 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l451ve.rs b/embassy-stm32/src/pac/stm32l451ve.rs index 038be6845..fc936321a 100644 --- a/embassy-stm32/src/pac/stm32l451ve.rs +++ b/embassy-stm32/src/pac/stm32l451ve.rs @@ -129,14 +129,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -189,7 +181,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -200,8 +191,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM2, TIM3, TIM6, USART1, - USART2, USART3 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l452cc.rs b/embassy-stm32/src/pac/stm32l452cc.rs index d9a532668..027e2896b 100644 --- a/embassy-stm32/src/pac/stm32l452cc.rs +++ b/embassy-stm32/src/pac/stm32l452cc.rs @@ -129,14 +129,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -189,7 +181,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -200,8 +191,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM2, TIM3, TIM6, USART1, - USART2, USART3 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l452ce.rs b/embassy-stm32/src/pac/stm32l452ce.rs index d9a532668..027e2896b 100644 --- a/embassy-stm32/src/pac/stm32l452ce.rs +++ b/embassy-stm32/src/pac/stm32l452ce.rs @@ -129,14 +129,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -189,7 +181,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -200,8 +191,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM2, TIM3, TIM6, USART1, - USART2, USART3 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l452rc.rs b/embassy-stm32/src/pac/stm32l452rc.rs index d9a532668..027e2896b 100644 --- a/embassy-stm32/src/pac/stm32l452rc.rs +++ b/embassy-stm32/src/pac/stm32l452rc.rs @@ -129,14 +129,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -189,7 +181,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -200,8 +191,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM2, TIM3, TIM6, USART1, - USART2, USART3 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l452re.rs b/embassy-stm32/src/pac/stm32l452re.rs index d9a532668..027e2896b 100644 --- a/embassy-stm32/src/pac/stm32l452re.rs +++ b/embassy-stm32/src/pac/stm32l452re.rs @@ -129,14 +129,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -189,7 +181,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -200,8 +191,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM2, TIM3, TIM6, USART1, - USART2, USART3 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l452vc.rs b/embassy-stm32/src/pac/stm32l452vc.rs index d9a532668..027e2896b 100644 --- a/embassy-stm32/src/pac/stm32l452vc.rs +++ b/embassy-stm32/src/pac/stm32l452vc.rs @@ -129,14 +129,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -189,7 +181,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -200,8 +191,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM2, TIM3, TIM6, USART1, - USART2, USART3 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l452ve.rs b/embassy-stm32/src/pac/stm32l452ve.rs index d9a532668..027e2896b 100644 --- a/embassy-stm32/src/pac/stm32l452ve.rs +++ b/embassy-stm32/src/pac/stm32l452ve.rs @@ -129,14 +129,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -189,7 +181,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -200,8 +191,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM2, TIM3, TIM6, USART1, - USART2, USART3 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l462ce.rs b/embassy-stm32/src/pac/stm32l462ce.rs index 1db5ee281..c352e870c 100644 --- a/embassy-stm32/src/pac/stm32l462ce.rs +++ b/embassy-stm32/src/pac/stm32l462ce.rs @@ -129,14 +129,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -189,7 +181,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -200,8 +191,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM2, TIM3, TIM6, USART1, - USART2, USART3 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l462re.rs b/embassy-stm32/src/pac/stm32l462re.rs index 1db5ee281..c352e870c 100644 --- a/embassy-stm32/src/pac/stm32l462re.rs +++ b/embassy-stm32/src/pac/stm32l462re.rs @@ -129,14 +129,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -189,7 +181,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -200,8 +191,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM2, TIM3, TIM6, USART1, - USART2, USART3 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l462ve.rs b/embassy-stm32/src/pac/stm32l462ve.rs index 1db5ee281..c352e870c 100644 --- a/embassy-stm32/src/pac/stm32l462ve.rs +++ b/embassy-stm32/src/pac/stm32l462ve.rs @@ -129,14 +129,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -189,7 +181,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -200,8 +191,7 @@ embassy_extras::peripherals!( PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, - PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM2, TIM3, TIM6, USART1, - USART2, USART3 + PH10, PH11, PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l471qe.rs b/embassy-stm32/src/pac/stm32l471qe.rs index 2e2ea33cc..70113ece0 100644 --- a/embassy-stm32/src/pac/stm32l471qe.rs +++ b/embassy-stm32/src/pac/stm32l471qe.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l471qg.rs b/embassy-stm32/src/pac/stm32l471qg.rs index 2e2ea33cc..70113ece0 100644 --- a/embassy-stm32/src/pac/stm32l471qg.rs +++ b/embassy-stm32/src/pac/stm32l471qg.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l471re.rs b/embassy-stm32/src/pac/stm32l471re.rs index 2e2ea33cc..70113ece0 100644 --- a/embassy-stm32/src/pac/stm32l471re.rs +++ b/embassy-stm32/src/pac/stm32l471re.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l471rg.rs b/embassy-stm32/src/pac/stm32l471rg.rs index 2e2ea33cc..70113ece0 100644 --- a/embassy-stm32/src/pac/stm32l471rg.rs +++ b/embassy-stm32/src/pac/stm32l471rg.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l471ve.rs b/embassy-stm32/src/pac/stm32l471ve.rs index 2e2ea33cc..70113ece0 100644 --- a/embassy-stm32/src/pac/stm32l471ve.rs +++ b/embassy-stm32/src/pac/stm32l471ve.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l471vg.rs b/embassy-stm32/src/pac/stm32l471vg.rs index 2e2ea33cc..70113ece0 100644 --- a/embassy-stm32/src/pac/stm32l471vg.rs +++ b/embassy-stm32/src/pac/stm32l471vg.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l471ze.rs b/embassy-stm32/src/pac/stm32l471ze.rs index 2e2ea33cc..70113ece0 100644 --- a/embassy-stm32/src/pac/stm32l471ze.rs +++ b/embassy-stm32/src/pac/stm32l471ze.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l471zg.rs b/embassy-stm32/src/pac/stm32l471zg.rs index 2e2ea33cc..70113ece0 100644 --- a/embassy-stm32/src/pac/stm32l471zg.rs +++ b/embassy-stm32/src/pac/stm32l471zg.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l475rc.rs b/embassy-stm32/src/pac/stm32l475rc.rs index 453c97c48..82bf9eed0 100644 --- a/embassy-stm32/src/pac/stm32l475rc.rs +++ b/embassy-stm32/src/pac/stm32l475rc.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l475re.rs b/embassy-stm32/src/pac/stm32l475re.rs index 453c97c48..82bf9eed0 100644 --- a/embassy-stm32/src/pac/stm32l475re.rs +++ b/embassy-stm32/src/pac/stm32l475re.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l475rg.rs b/embassy-stm32/src/pac/stm32l475rg.rs index 453c97c48..82bf9eed0 100644 --- a/embassy-stm32/src/pac/stm32l475rg.rs +++ b/embassy-stm32/src/pac/stm32l475rg.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l475vc.rs b/embassy-stm32/src/pac/stm32l475vc.rs index 453c97c48..82bf9eed0 100644 --- a/embassy-stm32/src/pac/stm32l475vc.rs +++ b/embassy-stm32/src/pac/stm32l475vc.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l475ve.rs b/embassy-stm32/src/pac/stm32l475ve.rs index 453c97c48..82bf9eed0 100644 --- a/embassy-stm32/src/pac/stm32l475ve.rs +++ b/embassy-stm32/src/pac/stm32l475ve.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l475vg.rs b/embassy-stm32/src/pac/stm32l475vg.rs index 453c97c48..82bf9eed0 100644 --- a/embassy-stm32/src/pac/stm32l475vg.rs +++ b/embassy-stm32/src/pac/stm32l475vg.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l476je.rs b/embassy-stm32/src/pac/stm32l476je.rs index 57c09d326..2752d3374 100644 --- a/embassy-stm32/src/pac/stm32l476je.rs +++ b/embassy-stm32/src/pac/stm32l476je.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l476jg.rs b/embassy-stm32/src/pac/stm32l476jg.rs index 57c09d326..2752d3374 100644 --- a/embassy-stm32/src/pac/stm32l476jg.rs +++ b/embassy-stm32/src/pac/stm32l476jg.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l476me.rs b/embassy-stm32/src/pac/stm32l476me.rs index 57c09d326..2752d3374 100644 --- a/embassy-stm32/src/pac/stm32l476me.rs +++ b/embassy-stm32/src/pac/stm32l476me.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l476mg.rs b/embassy-stm32/src/pac/stm32l476mg.rs index 57c09d326..2752d3374 100644 --- a/embassy-stm32/src/pac/stm32l476mg.rs +++ b/embassy-stm32/src/pac/stm32l476mg.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l476qe.rs b/embassy-stm32/src/pac/stm32l476qe.rs index 57c09d326..2752d3374 100644 --- a/embassy-stm32/src/pac/stm32l476qe.rs +++ b/embassy-stm32/src/pac/stm32l476qe.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l476qg.rs b/embassy-stm32/src/pac/stm32l476qg.rs index 57c09d326..2752d3374 100644 --- a/embassy-stm32/src/pac/stm32l476qg.rs +++ b/embassy-stm32/src/pac/stm32l476qg.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l476rc.rs b/embassy-stm32/src/pac/stm32l476rc.rs index 57c09d326..2752d3374 100644 --- a/embassy-stm32/src/pac/stm32l476rc.rs +++ b/embassy-stm32/src/pac/stm32l476rc.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l476re.rs b/embassy-stm32/src/pac/stm32l476re.rs index 57c09d326..2752d3374 100644 --- a/embassy-stm32/src/pac/stm32l476re.rs +++ b/embassy-stm32/src/pac/stm32l476re.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l476rg.rs b/embassy-stm32/src/pac/stm32l476rg.rs index 57c09d326..2752d3374 100644 --- a/embassy-stm32/src/pac/stm32l476rg.rs +++ b/embassy-stm32/src/pac/stm32l476rg.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l476vc.rs b/embassy-stm32/src/pac/stm32l476vc.rs index 57c09d326..2752d3374 100644 --- a/embassy-stm32/src/pac/stm32l476vc.rs +++ b/embassy-stm32/src/pac/stm32l476vc.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l476ve.rs b/embassy-stm32/src/pac/stm32l476ve.rs index 57c09d326..2752d3374 100644 --- a/embassy-stm32/src/pac/stm32l476ve.rs +++ b/embassy-stm32/src/pac/stm32l476ve.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l476vg.rs b/embassy-stm32/src/pac/stm32l476vg.rs index 57c09d326..2752d3374 100644 --- a/embassy-stm32/src/pac/stm32l476vg.rs +++ b/embassy-stm32/src/pac/stm32l476vg.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l476ze.rs b/embassy-stm32/src/pac/stm32l476ze.rs index 57c09d326..2752d3374 100644 --- a/embassy-stm32/src/pac/stm32l476ze.rs +++ b/embassy-stm32/src/pac/stm32l476ze.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l476zg.rs b/embassy-stm32/src/pac/stm32l476zg.rs index 57c09d326..2752d3374 100644 --- a/embassy-stm32/src/pac/stm32l476zg.rs +++ b/embassy-stm32/src/pac/stm32l476zg.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l485jc.rs b/embassy-stm32/src/pac/stm32l485jc.rs index 2d32485ab..13039a44e 100644 --- a/embassy-stm32/src/pac/stm32l485jc.rs +++ b/embassy-stm32/src/pac/stm32l485jc.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l485je.rs b/embassy-stm32/src/pac/stm32l485je.rs index 2d32485ab..13039a44e 100644 --- a/embassy-stm32/src/pac/stm32l485je.rs +++ b/embassy-stm32/src/pac/stm32l485je.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l486jg.rs b/embassy-stm32/src/pac/stm32l486jg.rs index 15873d0fe..ae5a1005f 100644 --- a/embassy-stm32/src/pac/stm32l486jg.rs +++ b/embassy-stm32/src/pac/stm32l486jg.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l486qg.rs b/embassy-stm32/src/pac/stm32l486qg.rs index 15873d0fe..ae5a1005f 100644 --- a/embassy-stm32/src/pac/stm32l486qg.rs +++ b/embassy-stm32/src/pac/stm32l486qg.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l486rg.rs b/embassy-stm32/src/pac/stm32l486rg.rs index 15873d0fe..ae5a1005f 100644 --- a/embassy-stm32/src/pac/stm32l486rg.rs +++ b/embassy-stm32/src/pac/stm32l486rg.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l486vg.rs b/embassy-stm32/src/pac/stm32l486vg.rs index 15873d0fe..ae5a1005f 100644 --- a/embassy-stm32/src/pac/stm32l486vg.rs +++ b/embassy-stm32/src/pac/stm32l486vg.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l486zg.rs b/embassy-stm32/src/pac/stm32l486zg.rs index 15873d0fe..ae5a1005f 100644 --- a/embassy-stm32/src/pac/stm32l486zg.rs +++ b/embassy-stm32/src/pac/stm32l486zg.rs @@ -163,21 +163,6 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15); pub const RNG: rng::Rng = rng::Rng(0x50060800 as _); impl_rng!(RNG, RNG); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -233,7 +218,6 @@ pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -246,8 +230,7 @@ embassy_extras::peripherals!( PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, - PH12, PH13, PH14, PH15, RNG, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, TIM5, TIM6, - TIM7, TIM8, USART1, USART2, USART3 + PH12, PH13, PH14, PH15, RNG, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l496ae.rs b/embassy-stm32/src/pac/stm32l496ae.rs index 3f66e04d2..483c76fc4 100644 --- a/embassy-stm32/src/pac/stm32l496ae.rs +++ b/embassy-stm32/src/pac/stm32l496ae.rs @@ -225,21 +225,6 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -298,7 +283,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -312,8 +296,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8, USART1, USART2, USART3 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l496ag.rs b/embassy-stm32/src/pac/stm32l496ag.rs index 3f66e04d2..483c76fc4 100644 --- a/embassy-stm32/src/pac/stm32l496ag.rs +++ b/embassy-stm32/src/pac/stm32l496ag.rs @@ -225,21 +225,6 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -298,7 +283,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -312,8 +296,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8, USART1, USART2, USART3 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l496qe.rs b/embassy-stm32/src/pac/stm32l496qe.rs index 3f66e04d2..483c76fc4 100644 --- a/embassy-stm32/src/pac/stm32l496qe.rs +++ b/embassy-stm32/src/pac/stm32l496qe.rs @@ -225,21 +225,6 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -298,7 +283,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -312,8 +296,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8, USART1, USART2, USART3 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l496qg.rs b/embassy-stm32/src/pac/stm32l496qg.rs index 3f66e04d2..483c76fc4 100644 --- a/embassy-stm32/src/pac/stm32l496qg.rs +++ b/embassy-stm32/src/pac/stm32l496qg.rs @@ -225,21 +225,6 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -298,7 +283,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -312,8 +296,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8, USART1, USART2, USART3 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l496re.rs b/embassy-stm32/src/pac/stm32l496re.rs index 3f66e04d2..483c76fc4 100644 --- a/embassy-stm32/src/pac/stm32l496re.rs +++ b/embassy-stm32/src/pac/stm32l496re.rs @@ -225,21 +225,6 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -298,7 +283,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -312,8 +296,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8, USART1, USART2, USART3 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l496rg.rs b/embassy-stm32/src/pac/stm32l496rg.rs index 3f66e04d2..483c76fc4 100644 --- a/embassy-stm32/src/pac/stm32l496rg.rs +++ b/embassy-stm32/src/pac/stm32l496rg.rs @@ -225,21 +225,6 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -298,7 +283,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -312,8 +296,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8, USART1, USART2, USART3 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l496ve.rs b/embassy-stm32/src/pac/stm32l496ve.rs index 3f66e04d2..483c76fc4 100644 --- a/embassy-stm32/src/pac/stm32l496ve.rs +++ b/embassy-stm32/src/pac/stm32l496ve.rs @@ -225,21 +225,6 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -298,7 +283,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -312,8 +296,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8, USART1, USART2, USART3 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l496vg.rs b/embassy-stm32/src/pac/stm32l496vg.rs index 3f66e04d2..483c76fc4 100644 --- a/embassy-stm32/src/pac/stm32l496vg.rs +++ b/embassy-stm32/src/pac/stm32l496vg.rs @@ -225,21 +225,6 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -298,7 +283,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -312,8 +296,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8, USART1, USART2, USART3 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l496wg.rs b/embassy-stm32/src/pac/stm32l496wg.rs index 3f66e04d2..483c76fc4 100644 --- a/embassy-stm32/src/pac/stm32l496wg.rs +++ b/embassy-stm32/src/pac/stm32l496wg.rs @@ -225,21 +225,6 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -298,7 +283,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -312,8 +296,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8, USART1, USART2, USART3 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l496ze.rs b/embassy-stm32/src/pac/stm32l496ze.rs index 3f66e04d2..483c76fc4 100644 --- a/embassy-stm32/src/pac/stm32l496ze.rs +++ b/embassy-stm32/src/pac/stm32l496ze.rs @@ -225,21 +225,6 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -298,7 +283,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -312,8 +296,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8, USART1, USART2, USART3 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l496zg.rs b/embassy-stm32/src/pac/stm32l496zg.rs index 3f66e04d2..483c76fc4 100644 --- a/embassy-stm32/src/pac/stm32l496zg.rs +++ b/embassy-stm32/src/pac/stm32l496zg.rs @@ -225,21 +225,6 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -298,7 +283,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -312,8 +296,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8, USART1, USART2, USART3 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4a6ag.rs b/embassy-stm32/src/pac/stm32l4a6ag.rs index a3703bf29..6b9723171 100644 --- a/embassy-stm32/src/pac/stm32l4a6ag.rs +++ b/embassy-stm32/src/pac/stm32l4a6ag.rs @@ -225,21 +225,6 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -298,7 +283,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -312,8 +296,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8, USART1, USART2, USART3 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4a6qg.rs b/embassy-stm32/src/pac/stm32l4a6qg.rs index a3703bf29..6b9723171 100644 --- a/embassy-stm32/src/pac/stm32l4a6qg.rs +++ b/embassy-stm32/src/pac/stm32l4a6qg.rs @@ -225,21 +225,6 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -298,7 +283,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -312,8 +296,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8, USART1, USART2, USART3 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4a6rg.rs b/embassy-stm32/src/pac/stm32l4a6rg.rs index a3703bf29..6b9723171 100644 --- a/embassy-stm32/src/pac/stm32l4a6rg.rs +++ b/embassy-stm32/src/pac/stm32l4a6rg.rs @@ -225,21 +225,6 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -298,7 +283,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -312,8 +296,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8, USART1, USART2, USART3 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4a6vg.rs b/embassy-stm32/src/pac/stm32l4a6vg.rs index a3703bf29..6b9723171 100644 --- a/embassy-stm32/src/pac/stm32l4a6vg.rs +++ b/embassy-stm32/src/pac/stm32l4a6vg.rs @@ -225,21 +225,6 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -298,7 +283,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -312,8 +296,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8, USART1, USART2, USART3 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4a6zg.rs b/embassy-stm32/src/pac/stm32l4a6zg.rs index a3703bf29..6b9723171 100644 --- a/embassy-stm32/src/pac/stm32l4a6zg.rs +++ b/embassy-stm32/src/pac/stm32l4a6zg.rs @@ -225,21 +225,6 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub const USART1: usart::Usart = usart::Usart(0x40013800 as _); impl_usart!(USART1); impl_usart_pin!(USART1, RxPin, PA10, 7); @@ -298,7 +283,6 @@ pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; pub use super::regs::usart_v2 as usart; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, @@ -312,8 +296,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8, USART1, USART2, USART3 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, USART1, USART2, USART3 ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4p5ae.rs b/embassy-stm32/src/pac/stm32l4p5ae.rs index 4bdc03a65..ee359d874 100644 --- a/embassy-stm32/src/pac/stm32l4p5ae.rs +++ b/embassy-stm32/src/pac/stm32l4p5ae.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4p5ag.rs b/embassy-stm32/src/pac/stm32l4p5ag.rs index 4bdc03a65..ee359d874 100644 --- a/embassy-stm32/src/pac/stm32l4p5ag.rs +++ b/embassy-stm32/src/pac/stm32l4p5ag.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4p5ce.rs b/embassy-stm32/src/pac/stm32l4p5ce.rs index 4bdc03a65..ee359d874 100644 --- a/embassy-stm32/src/pac/stm32l4p5ce.rs +++ b/embassy-stm32/src/pac/stm32l4p5ce.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4p5cg.rs b/embassy-stm32/src/pac/stm32l4p5cg.rs index 4bdc03a65..ee359d874 100644 --- a/embassy-stm32/src/pac/stm32l4p5cg.rs +++ b/embassy-stm32/src/pac/stm32l4p5cg.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4p5qe.rs b/embassy-stm32/src/pac/stm32l4p5qe.rs index 4bdc03a65..ee359d874 100644 --- a/embassy-stm32/src/pac/stm32l4p5qe.rs +++ b/embassy-stm32/src/pac/stm32l4p5qe.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4p5qg.rs b/embassy-stm32/src/pac/stm32l4p5qg.rs index 4bdc03a65..ee359d874 100644 --- a/embassy-stm32/src/pac/stm32l4p5qg.rs +++ b/embassy-stm32/src/pac/stm32l4p5qg.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4p5re.rs b/embassy-stm32/src/pac/stm32l4p5re.rs index 4bdc03a65..ee359d874 100644 --- a/embassy-stm32/src/pac/stm32l4p5re.rs +++ b/embassy-stm32/src/pac/stm32l4p5re.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4p5rg.rs b/embassy-stm32/src/pac/stm32l4p5rg.rs index 4bdc03a65..ee359d874 100644 --- a/embassy-stm32/src/pac/stm32l4p5rg.rs +++ b/embassy-stm32/src/pac/stm32l4p5rg.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4p5ve.rs b/embassy-stm32/src/pac/stm32l4p5ve.rs index 4bdc03a65..ee359d874 100644 --- a/embassy-stm32/src/pac/stm32l4p5ve.rs +++ b/embassy-stm32/src/pac/stm32l4p5ve.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4p5vg.rs b/embassy-stm32/src/pac/stm32l4p5vg.rs index 4bdc03a65..ee359d874 100644 --- a/embassy-stm32/src/pac/stm32l4p5vg.rs +++ b/embassy-stm32/src/pac/stm32l4p5vg.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4p5ze.rs b/embassy-stm32/src/pac/stm32l4p5ze.rs index 4bdc03a65..ee359d874 100644 --- a/embassy-stm32/src/pac/stm32l4p5ze.rs +++ b/embassy-stm32/src/pac/stm32l4p5ze.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4p5zg.rs b/embassy-stm32/src/pac/stm32l4p5zg.rs index 4bdc03a65..ee359d874 100644 --- a/embassy-stm32/src/pac/stm32l4p5zg.rs +++ b/embassy-stm32/src/pac/stm32l4p5zg.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4q5ag.rs b/embassy-stm32/src/pac/stm32l4q5ag.rs index 964b4bfa8..9cb70b537 100644 --- a/embassy-stm32/src/pac/stm32l4q5ag.rs +++ b/embassy-stm32/src/pac/stm32l4q5ag.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4q5cg.rs b/embassy-stm32/src/pac/stm32l4q5cg.rs index 964b4bfa8..9cb70b537 100644 --- a/embassy-stm32/src/pac/stm32l4q5cg.rs +++ b/embassy-stm32/src/pac/stm32l4q5cg.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4q5qg.rs b/embassy-stm32/src/pac/stm32l4q5qg.rs index 964b4bfa8..9cb70b537 100644 --- a/embassy-stm32/src/pac/stm32l4q5qg.rs +++ b/embassy-stm32/src/pac/stm32l4q5qg.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4q5rg.rs b/embassy-stm32/src/pac/stm32l4q5rg.rs index 964b4bfa8..9cb70b537 100644 --- a/embassy-stm32/src/pac/stm32l4q5rg.rs +++ b/embassy-stm32/src/pac/stm32l4q5rg.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4q5vg.rs b/embassy-stm32/src/pac/stm32l4q5vg.rs index 964b4bfa8..9cb70b537 100644 --- a/embassy-stm32/src/pac/stm32l4q5vg.rs +++ b/embassy-stm32/src/pac/stm32l4q5vg.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4q5zg.rs b/embassy-stm32/src/pac/stm32l4q5zg.rs index 964b4bfa8..9cb70b537 100644 --- a/embassy-stm32/src/pac/stm32l4q5zg.rs +++ b/embassy-stm32/src/pac/stm32l4q5zg.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4r5ag.rs b/embassy-stm32/src/pac/stm32l4r5ag.rs index 75628f651..a51f2d235 100644 --- a/embassy-stm32/src/pac/stm32l4r5ag.rs +++ b/embassy-stm32/src/pac/stm32l4r5ag.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4r5ai.rs b/embassy-stm32/src/pac/stm32l4r5ai.rs index 75628f651..a51f2d235 100644 --- a/embassy-stm32/src/pac/stm32l4r5ai.rs +++ b/embassy-stm32/src/pac/stm32l4r5ai.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4r5qg.rs b/embassy-stm32/src/pac/stm32l4r5qg.rs index 75628f651..a51f2d235 100644 --- a/embassy-stm32/src/pac/stm32l4r5qg.rs +++ b/embassy-stm32/src/pac/stm32l4r5qg.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4r5qi.rs b/embassy-stm32/src/pac/stm32l4r5qi.rs index 75628f651..a51f2d235 100644 --- a/embassy-stm32/src/pac/stm32l4r5qi.rs +++ b/embassy-stm32/src/pac/stm32l4r5qi.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4r5vg.rs b/embassy-stm32/src/pac/stm32l4r5vg.rs index 75628f651..a51f2d235 100644 --- a/embassy-stm32/src/pac/stm32l4r5vg.rs +++ b/embassy-stm32/src/pac/stm32l4r5vg.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4r5vi.rs b/embassy-stm32/src/pac/stm32l4r5vi.rs index 75628f651..a51f2d235 100644 --- a/embassy-stm32/src/pac/stm32l4r5vi.rs +++ b/embassy-stm32/src/pac/stm32l4r5vi.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4r5zg.rs b/embassy-stm32/src/pac/stm32l4r5zg.rs index 75628f651..a51f2d235 100644 --- a/embassy-stm32/src/pac/stm32l4r5zg.rs +++ b/embassy-stm32/src/pac/stm32l4r5zg.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4r5zi.rs b/embassy-stm32/src/pac/stm32l4r5zi.rs index 75628f651..a51f2d235 100644 --- a/embassy-stm32/src/pac/stm32l4r5zi.rs +++ b/embassy-stm32/src/pac/stm32l4r5zi.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4r7ai.rs b/embassy-stm32/src/pac/stm32l4r7ai.rs index d00a1354c..f5e850d48 100644 --- a/embassy-stm32/src/pac/stm32l4r7ai.rs +++ b/embassy-stm32/src/pac/stm32l4r7ai.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4r7vi.rs b/embassy-stm32/src/pac/stm32l4r7vi.rs index d00a1354c..f5e850d48 100644 --- a/embassy-stm32/src/pac/stm32l4r7vi.rs +++ b/embassy-stm32/src/pac/stm32l4r7vi.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4r7zi.rs b/embassy-stm32/src/pac/stm32l4r7zi.rs index d00a1354c..f5e850d48 100644 --- a/embassy-stm32/src/pac/stm32l4r7zi.rs +++ b/embassy-stm32/src/pac/stm32l4r7zi.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4r9ag.rs b/embassy-stm32/src/pac/stm32l4r9ag.rs index eef2fd84f..e9377e1bb 100644 --- a/embassy-stm32/src/pac/stm32l4r9ag.rs +++ b/embassy-stm32/src/pac/stm32l4r9ag.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4r9ai.rs b/embassy-stm32/src/pac/stm32l4r9ai.rs index eef2fd84f..e9377e1bb 100644 --- a/embassy-stm32/src/pac/stm32l4r9ai.rs +++ b/embassy-stm32/src/pac/stm32l4r9ai.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4r9vg.rs b/embassy-stm32/src/pac/stm32l4r9vg.rs index eef2fd84f..e9377e1bb 100644 --- a/embassy-stm32/src/pac/stm32l4r9vg.rs +++ b/embassy-stm32/src/pac/stm32l4r9vg.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4r9vi.rs b/embassy-stm32/src/pac/stm32l4r9vi.rs index eef2fd84f..e9377e1bb 100644 --- a/embassy-stm32/src/pac/stm32l4r9vi.rs +++ b/embassy-stm32/src/pac/stm32l4r9vi.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4r9zg.rs b/embassy-stm32/src/pac/stm32l4r9zg.rs index eef2fd84f..e9377e1bb 100644 --- a/embassy-stm32/src/pac/stm32l4r9zg.rs +++ b/embassy-stm32/src/pac/stm32l4r9zg.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4r9zi.rs b/embassy-stm32/src/pac/stm32l4r9zi.rs index eef2fd84f..e9377e1bb 100644 --- a/embassy-stm32/src/pac/stm32l4r9zi.rs +++ b/embassy-stm32/src/pac/stm32l4r9zi.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4s5ai.rs b/embassy-stm32/src/pac/stm32l4s5ai.rs index e443f46f7..35908498e 100644 --- a/embassy-stm32/src/pac/stm32l4s5ai.rs +++ b/embassy-stm32/src/pac/stm32l4s5ai.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4s5qi.rs b/embassy-stm32/src/pac/stm32l4s5qi.rs index e443f46f7..35908498e 100644 --- a/embassy-stm32/src/pac/stm32l4s5qi.rs +++ b/embassy-stm32/src/pac/stm32l4s5qi.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4s5vi.rs b/embassy-stm32/src/pac/stm32l4s5vi.rs index e443f46f7..35908498e 100644 --- a/embassy-stm32/src/pac/stm32l4s5vi.rs +++ b/embassy-stm32/src/pac/stm32l4s5vi.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4s5zi.rs b/embassy-stm32/src/pac/stm32l4s5zi.rs index e443f46f7..35908498e 100644 --- a/embassy-stm32/src/pac/stm32l4s5zi.rs +++ b/embassy-stm32/src/pac/stm32l4s5zi.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4s7ai.rs b/embassy-stm32/src/pac/stm32l4s7ai.rs index acbc66956..6c25274ef 100644 --- a/embassy-stm32/src/pac/stm32l4s7ai.rs +++ b/embassy-stm32/src/pac/stm32l4s7ai.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4s7vi.rs b/embassy-stm32/src/pac/stm32l4s7vi.rs index acbc66956..6c25274ef 100644 --- a/embassy-stm32/src/pac/stm32l4s7vi.rs +++ b/embassy-stm32/src/pac/stm32l4s7vi.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4s7zi.rs b/embassy-stm32/src/pac/stm32l4s7zi.rs index acbc66956..6c25274ef 100644 --- a/embassy-stm32/src/pac/stm32l4s7zi.rs +++ b/embassy-stm32/src/pac/stm32l4s7zi.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4s9ai.rs b/embassy-stm32/src/pac/stm32l4s9ai.rs index 857c202d7..a59911309 100644 --- a/embassy-stm32/src/pac/stm32l4s9ai.rs +++ b/embassy-stm32/src/pac/stm32l4s9ai.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4s9vi.rs b/embassy-stm32/src/pac/stm32l4s9vi.rs index 857c202d7..a59911309 100644 --- a/embassy-stm32/src/pac/stm32l4s9vi.rs +++ b/embassy-stm32/src/pac/stm32l4s9vi.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/src/pac/stm32l4s9zi.rs b/embassy-stm32/src/pac/stm32l4s9zi.rs index 857c202d7..a59911309 100644 --- a/embassy-stm32/src/pac/stm32l4s9zi.rs +++ b/embassy-stm32/src/pac/stm32l4s9zi.rs @@ -226,28 +226,12 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6); impl_spi_pin!(SPI3, MosiPin, PG11, 6); impl_spi_pin!(SPI3, SckPin, PG9, 6); pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _); -pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _); -pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _); -pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _); -pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _); -pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _); -impl_timer!(TIM2); -pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _); -impl_timer!(TIM3); -pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _); -impl_timer!(TIM4); -pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _); -impl_timer!(TIM5); -pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _); -pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _); -pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _); pub use super::regs::dma_v1 as dma; pub use super::regs::exti_v1 as exti; pub use super::regs::gpio_v2 as gpio; pub use super::regs::rng_v1 as rng; pub use super::regs::spi_v2 as spi; pub use super::regs::syscfg_l4 as syscfg; -pub use super::regs::timer_v1 as timer; embassy_extras::peripherals!( EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5, EXTI6, EXTI7, EXTI8, EXTI9, EXTI10, EXTI11, EXTI12, EXTI13, EXTI14, EXTI15, DMA1_CH0, DMA1_CH1, DMA1_CH2, DMA1_CH3, DMA1_CH4, DMA1_CH5, DMA1_CH6, @@ -260,8 +244,7 @@ embassy_extras::peripherals!( PF10, PF11, PF12, PF13, PF14, PF15, PG0, PG1, PG2, PG3, PG4, PG5, PG6, PG7, PG8, PG9, PG10, PG11, PG12, PG13, PG14, PG15, PH0, PH1, PH2, PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PH11, PH12, PH13, PH14, PH15, PI0, PI1, PI2, PI3, PI4, PI5, PI6, PI7, PI8, PI9, PI10, PI11, PI12, - PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG, TIM1, TIM15, TIM16, TIM17, TIM2, TIM3, TIM4, - TIM5, TIM6, TIM7, TIM8 + PI13, PI14, PI15, RNG, SPI1, SPI2, SPI3, SYSCFG ); pub fn DMA(n: u8) -> dma::Dma { match n { diff --git a/embassy-stm32/stm32-data b/embassy-stm32/stm32-data index c5db875ec..69050696d 160000 --- a/embassy-stm32/stm32-data +++ b/embassy-stm32/stm32-data @@ -1 +1 @@ -Subproject commit c5db875ec2ce8568cfac018ecbdf288fc4b63ba0 +Subproject commit 69050696dd8b747119f8f4e76bb16e676a7599f8 -- cgit