From 110a5eb4e58ecee5bc45bd47c3366ea241587e1b Mon Sep 17 00:00:00 2001
From: James Munns <james@onevariable.com>
Date: Wed, 12 Nov 2025 17:16:19 +0100
Subject: Remove example feats, get examples building

No CI, but this can be checked with `cargo check --all --examples`,
which now succeeds.
---
 examples/common/mod.rs | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'examples/common/mod.rs')

diff --git a/examples/common/mod.rs b/examples/common/mod.rs
index 7ada4c456..8c52c8e86 100644
--- a/examples/common/mod.rs
+++ b/examples/common/mod.rs
@@ -1,13 +1,13 @@
 //! Shared board-specific helpers for the FRDM-MCXA276 examples.
 //! These live with the examples so the HAL stays generic.
 
-use embassy_mcxa276 as hal;
 use hal::{clocks, pins, reset};
+use {embassy_mcxa276 as hal, panic_probe as _};
 
 /// Initialize clocks and pin muxing for UART2 debug console.
 /// Safe to call multiple times; writes are idempotent for our use.
 #[allow(dead_code)]
-pub unsafe fn init_uart2(p: &hal::pac::Peripherals) {
+pub unsafe fn init_uart2(p: &mcxa_pac::Peripherals) {
     clocks::ensure_frolf_running(p);
     clocks::enable_uart2_port2(p);
     reset::release_reset_port2(p);
@@ -18,7 +18,7 @@ pub unsafe fn init_uart2(p: &hal::pac::Peripherals) {
 
 /// Initialize clocks for the LED GPIO/PORT used by the blink example.
 #[allow(dead_code)]
-pub unsafe fn init_led(p: &hal::pac::Peripherals) {
+pub unsafe fn init_led(p: &mcxa_pac::Peripherals) {
     clocks::enable_led_port(p);
     reset::release_reset_gpio3(p);
     reset::release_reset_port3(p);
@@ -26,7 +26,7 @@ pub unsafe fn init_led(p: &hal::pac::Peripherals) {
 
 /// Initialize clocks for OSTIMER0 (1 MHz source).
 #[allow(dead_code)]
-pub unsafe fn init_ostimer0(p: &hal::pac::Peripherals) {
+pub unsafe fn init_ostimer0(p: &mcxa_pac::Peripherals) {
     clocks::ensure_frolf_running(p);
     clocks::enable_ostimer0(p);
     reset::release_reset_ostimer0(p);
@@ -35,7 +35,7 @@ pub unsafe fn init_ostimer0(p: &hal::pac::Peripherals) {
 
 /// Initialize clocks and pin muxing for ADC.
 #[allow(dead_code)]
-pub unsafe fn init_adc(p: &hal::pac::Peripherals) {
+pub unsafe fn init_adc(p: &mcxa_pac::Peripherals) {
     clocks::ensure_frolf_running(p);
     clocks::enable_adc(p);
     reset::release_reset_port1(p);
-- 
cgit