From 3932835998802fc3abf7cce4f736e072858ebfd1 Mon Sep 17 00:00:00 2001
From: Curly <u007d@humanenginuity.com>
Date: Sun, 23 Feb 2025 07:33:58 -0800
Subject: rename `rp23` (?) folder to `rp235x`; fix `ci.sh` to use `rp235x`
 folder

---
 examples/rp235x/src/bin/uart_buffered_split.rs | 58 ++++++++++++++++++++++++++
 1 file changed, 58 insertions(+)
 create mode 100644 examples/rp235x/src/bin/uart_buffered_split.rs

(limited to 'examples/rp235x/src/bin/uart_buffered_split.rs')

diff --git a/examples/rp235x/src/bin/uart_buffered_split.rs b/examples/rp235x/src/bin/uart_buffered_split.rs
new file mode 100644
index 000000000..468d2b61a
--- /dev/null
+++ b/examples/rp235x/src/bin/uart_buffered_split.rs
@@ -0,0 +1,58 @@
+//! This example shows how to use UART (Universal asynchronous receiver-transmitter) in the RP2040 chip.
+//!
+//! No specific hardware is specified in this example. If you connect pin 0 and 1 you should get the same data back.
+//! The Raspberry Pi Debug Probe (https://www.raspberrypi.com/products/debug-probe/) could be used
+//! with its UART port.
+
+#![no_std]
+#![no_main]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_rp::bind_interrupts;
+use embassy_rp::peripherals::UART0;
+use embassy_rp::uart::{BufferedInterruptHandler, BufferedUart, BufferedUartRx, Config};
+use embassy_time::Timer;
+use embedded_io_async::{Read, Write};
+use static_cell::StaticCell;
+use {defmt_rtt as _, panic_probe as _};
+
+bind_interrupts!(struct Irqs {
+    UART0_IRQ => BufferedInterruptHandler<UART0>;
+});
+
+#[embassy_executor::main]
+async fn main(spawner: Spawner) {
+    let p = embassy_rp::init(Default::default());
+    let (tx_pin, rx_pin, uart) = (p.PIN_0, p.PIN_1, p.UART0);
+
+    static TX_BUF: StaticCell<[u8; 16]> = StaticCell::new();
+    let tx_buf = &mut TX_BUF.init([0; 16])[..];
+    static RX_BUF: StaticCell<[u8; 16]> = StaticCell::new();
+    let rx_buf = &mut RX_BUF.init([0; 16])[..];
+    let uart = BufferedUart::new(uart, Irqs, tx_pin, rx_pin, tx_buf, rx_buf, Config::default());
+    let (mut tx, rx) = uart.split();
+
+    unwrap!(spawner.spawn(reader(rx)));
+
+    info!("Writing...");
+    loop {
+        let data = [
+            1u8, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28,
+            29, 30, 31,
+        ];
+        info!("TX {:?}", data);
+        tx.write_all(&data).await.unwrap();
+        Timer::after_secs(1).await;
+    }
+}
+
+#[embassy_executor::task]
+async fn reader(mut rx: BufferedUartRx<'static, UART0>) {
+    info!("Reading...");
+    loop {
+        let mut buf = [0; 31];
+        rx.read_exact(&mut buf).await.unwrap();
+        info!("RX {:?}", buf);
+    }
+}
-- 
cgit