From 4567beda7b7773c8cb11f19f0f4f146c1243508d Mon Sep 17 00:00:00 2001
From: 1-rafael-1 <rafael.koch@gmx.net>
Date: Sun, 11 May 2025 17:26:36 +0200
Subject: rp235x overclocking

---
 examples/rp235x/src/bin/overclock.rs | 74 ++++++++++++++++++++++++++++++++++++
 1 file changed, 74 insertions(+)
 create mode 100644 examples/rp235x/src/bin/overclock.rs

(limited to 'examples/rp235x')

diff --git a/examples/rp235x/src/bin/overclock.rs b/examples/rp235x/src/bin/overclock.rs
new file mode 100644
index 000000000..8713df688
--- /dev/null
+++ b/examples/rp235x/src/bin/overclock.rs
@@ -0,0 +1,74 @@
+//! # Overclocking the RP2350 to 200 MHz
+//!
+//! This example demonstrates how to configure the RP2350 to run at 200 MHz instead of the default 150 MHz.
+//!
+//! ## Note
+//!
+//! As of yet there is no official support for running the RP235x at higher clock frequencies and/or other core voltages than the default.
+//! Doing so may cause unexpected behavior and/or damage the chip.
+
+#![no_std]
+#![no_main]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_rp::clocks::{clk_sys_freq, core_voltage, ClockConfig, CoreVoltage};
+use embassy_rp::config::Config;
+use embassy_rp::gpio::{Level, Output};
+use embassy_time::{Duration, Instant, Timer};
+use {defmt_rtt as _, panic_probe as _};
+
+const COUNT_TO: i64 = 10_000_000;
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) -> ! {
+    // Set up for clock frequency of 200 MHz, setting all necessary defaults.
+    let mut config = Config::new(ClockConfig::system_freq(200_000_000));
+
+    // since for the rp235x there is no official support for higher clock frequencies, `system_freq()` will not set a voltage for us.
+    // We need to guess the core voltage, that is needed for the higher clock frequency. Going with a small increase from the default 1.1V here, based on
+    // what we know about the RP2040. This is not guaranteed to be correct.
+    config.clocks.core_voltage = CoreVoltage::V1_15;
+
+    // Initialize the peripherals
+    let p = embassy_rp::init(config);
+
+    // Show CPU frequency for verification
+    let sys_freq = clk_sys_freq();
+    info!("System clock frequency: {} MHz", sys_freq / 1_000_000);
+    // Show core voltage for verification
+    let core_voltage = core_voltage().unwrap();
+    info!("Core voltage: {}", Debug2Format(&core_voltage));
+
+    // LED to indicate the system is running
+    let mut led = Output::new(p.PIN_25, Level::Low);
+
+    loop {
+        // Reset the counter at the start of measurement period
+        let mut counter = 0;
+
+        // Turn LED on while counting
+        led.set_high();
+
+        let start = Instant::now();
+
+        // This is a busy loop that will take some time to complete
+        while counter < COUNT_TO {
+            counter += 1;
+        }
+
+        let elapsed = Instant::now() - start;
+
+        // Report the elapsed time
+        led.set_low();
+        info!(
+            "At {}Mhz: Elapsed time to count to {}: {}ms",
+            sys_freq / 1_000_000,
+            counter,
+            elapsed.as_millis()
+        );
+
+        // Wait 2 seconds before starting the next measurement
+        Timer::after(Duration::from_secs(2)).await;
+    }
+}
-- 
cgit 


From 79e452922a6b467f2e8547a6b28698ed5f409705 Mon Sep 17 00:00:00 2001
From: 1-rafael-1 <rafael.koch@gmx.net>
Date: Mon, 12 May 2025 21:33:47 +0200
Subject: Add ClockError enum and update system_freq to return Result for error
 handling

---
 examples/rp235x/src/bin/overclock.rs | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'examples/rp235x')

diff --git a/examples/rp235x/src/bin/overclock.rs b/examples/rp235x/src/bin/overclock.rs
index 8713df688..178fd62ca 100644
--- a/examples/rp235x/src/bin/overclock.rs
+++ b/examples/rp235x/src/bin/overclock.rs
@@ -23,7 +23,7 @@ const COUNT_TO: i64 = 10_000_000;
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) -> ! {
     // Set up for clock frequency of 200 MHz, setting all necessary defaults.
-    let mut config = Config::new(ClockConfig::system_freq(200_000_000));
+    let mut config = Config::new(ClockConfig::system_freq(200_000_000).unwrap());
 
     // since for the rp235x there is no official support for higher clock frequencies, `system_freq()` will not set a voltage for us.
     // We need to guess the core voltage, that is needed for the higher clock frequency. Going with a small increase from the default 1.1V here, based on
-- 
cgit 


From abafbed0d5fba70ab5d0096b9d381577d2f880c8 Mon Sep 17 00:00:00 2001
From: 1-rafael-1 <rafael.koch@gmx.net>
Date: Mon, 12 May 2025 21:43:17 +0200
Subject: remove Debug2Fmt from examples

---
 examples/rp235x/src/bin/overclock.rs | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'examples/rp235x')

diff --git a/examples/rp235x/src/bin/overclock.rs b/examples/rp235x/src/bin/overclock.rs
index 178fd62ca..5fd97ef97 100644
--- a/examples/rp235x/src/bin/overclock.rs
+++ b/examples/rp235x/src/bin/overclock.rs
@@ -38,7 +38,7 @@ async fn main(_spawner: Spawner) -> ! {
     info!("System clock frequency: {} MHz", sys_freq / 1_000_000);
     // Show core voltage for verification
     let core_voltage = core_voltage().unwrap();
-    info!("Core voltage: {}", Debug2Format(&core_voltage));
+    info!("Core voltage: {}", core_voltage);
 
     // LED to indicate the system is running
     let mut led = Output::new(p.PIN_25, Level::Low);
-- 
cgit