From d41eeeae79388f219bf6a84e2f7bde9f6b532516 Mon Sep 17 00:00:00 2001
From: Dario Nieuwenhuis <dirbaio@dirbaio.net>
Date: Wed, 26 Mar 2025 16:01:37 +0100
Subject: Remove Peripheral trait, rename PeripheralRef->Peri.

---
 examples/stm32f1/src/bin/input_capture.rs | 4 ++--
 examples/stm32f1/src/bin/pwm_input.rs     | 4 ++--
 examples/stm32f1/src/bin/usb_serial.rs    | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'examples/stm32f1/src')

diff --git a/examples/stm32f1/src/bin/input_capture.rs b/examples/stm32f1/src/bin/input_capture.rs
index 5e2dab9e6..6fe8e0b50 100644
--- a/examples/stm32f1/src/bin/input_capture.rs
+++ b/examples/stm32f1/src/bin/input_capture.rs
@@ -7,14 +7,14 @@ use embassy_stm32::gpio::{Level, Output, Pull, Speed};
 use embassy_stm32::time::khz;
 use embassy_stm32::timer::input_capture::{CapturePin, InputCapture};
 use embassy_stm32::timer::{self, Channel};
-use embassy_stm32::{bind_interrupts, peripherals};
+use embassy_stm32::{bind_interrupts, peripherals, Peri};
 use embassy_time::Timer;
 use {defmt_rtt as _, panic_probe as _};
 
 /// Connect PA2 and PC13 with a 1k Ohm resistor
 
 #[embassy_executor::task]
-async fn blinky(led: peripherals::PC13) {
+async fn blinky(led: Peri<'static, peripherals::PC13>) {
     let mut led = Output::new(led, Level::High, Speed::Low);
 
     loop {
diff --git a/examples/stm32f1/src/bin/pwm_input.rs b/examples/stm32f1/src/bin/pwm_input.rs
index f74853d4e..afbef3edb 100644
--- a/examples/stm32f1/src/bin/pwm_input.rs
+++ b/examples/stm32f1/src/bin/pwm_input.rs
@@ -6,14 +6,14 @@ use embassy_executor::Spawner;
 use embassy_stm32::gpio::{Level, Output, Pull, Speed};
 use embassy_stm32::time::khz;
 use embassy_stm32::timer::pwm_input::PwmInput;
-use embassy_stm32::{bind_interrupts, peripherals, timer};
+use embassy_stm32::{bind_interrupts, peripherals, timer, Peri};
 use embassy_time::Timer;
 use {defmt_rtt as _, panic_probe as _};
 
 /// Connect PA0 and PC13 with a 1k Ohm resistor
 
 #[embassy_executor::task]
-async fn blinky(led: peripherals::PC13) {
+async fn blinky(led: Peri<'static, peripherals::PC13>) {
     let mut led = Output::new(led, Level::High, Speed::Low);
 
     loop {
diff --git a/examples/stm32f1/src/bin/usb_serial.rs b/examples/stm32f1/src/bin/usb_serial.rs
index ee99acf41..77ec307b9 100644
--- a/examples/stm32f1/src/bin/usb_serial.rs
+++ b/examples/stm32f1/src/bin/usb_serial.rs
@@ -47,7 +47,7 @@ async fn main(_spawner: Spawner) {
         // Pull the D+ pin down to send a RESET condition to the USB bus.
         // This forced reset is needed only for development, without it host
         // will not reset your device when you upload new firmware.
-        let _dp = Output::new(&mut p.PA12, Level::Low, Speed::Low);
+        let _dp = Output::new(p.PA12.reborrow(), Level::Low, Speed::Low);
         Timer::after_millis(10).await;
     }
 
-- 
cgit