From cd4f8f13a2c533f4e752c2e446661a6d86b19fe6 Mon Sep 17 00:00:00 2001
From: goueslati <ghaith.oueslati@habemus.com>
Date: Thu, 22 Jun 2023 15:21:14 +0100
Subject: wpan: add BLE HCI

---
 examples/stm32wb/.cargo/config.toml          |   2 +-
 examples/stm32wb/Cargo.toml                  |   6 +-
 examples/stm32wb/src/bin/eddystone_beacon.rs | 249 +++++++++++++++++++++++++++
 3 files changed, 255 insertions(+), 2 deletions(-)
 create mode 100644 examples/stm32wb/src/bin/eddystone_beacon.rs

(limited to 'examples')

diff --git a/examples/stm32wb/.cargo/config.toml b/examples/stm32wb/.cargo/config.toml
index d23fdc513..35317a297 100644
--- a/examples/stm32wb/.cargo/config.toml
+++ b/examples/stm32wb/.cargo/config.toml
@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
 # replace STM32WB55CCUx with your chip as listed in `probe-rs-cli chip list`
-# runner = "probe-rs-cli run --chip STM32WB55CCUx --speed 1000 --connect-under-reset"
+# runner = "probe-rs-cli run --chip STM32WB55RGVx --speed 1000 --connect-under-reset"
 runner = "teleprobe local run --chip STM32WB55RG --elf"
 
 [build]
diff --git a/examples/stm32wb/Cargo.toml b/examples/stm32wb/Cargo.toml
index e41424aad..726cd10d4 100644
--- a/examples/stm32wb/Cargo.toml
+++ b/examples/stm32wb/Cargo.toml
@@ -33,4 +33,8 @@ required-features = ["ble"]
 
 [[bin]] 
 name = "tl_mbox_mac"
-required-features = ["mac"]
\ No newline at end of file
+required-features = ["mac"]
+
+[[bin]] 
+name = "eddystone_beacon"
+required-features = ["ble"]
\ No newline at end of file
diff --git a/examples/stm32wb/src/bin/eddystone_beacon.rs b/examples/stm32wb/src/bin/eddystone_beacon.rs
new file mode 100644
index 000000000..fdd5be4a2
--- /dev/null
+++ b/examples/stm32wb/src/bin/eddystone_beacon.rs
@@ -0,0 +1,249 @@
+#![no_std]
+#![no_main]
+#![feature(type_alias_impl_trait)]
+
+use core::time::Duration;
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_stm32::bind_interrupts;
+use embassy_stm32::ipcc::{Config, ReceiveInterruptHandler, TransmitInterruptHandler};
+use embassy_stm32_wpan::ble::hci::host::uart::UartHci;
+use embassy_stm32_wpan::ble::hci::host::{AdvertisingFilterPolicy, EncryptionKey, HostHci, OwnAddressType};
+use embassy_stm32_wpan::ble::hci::types::AdvertisingType;
+use embassy_stm32_wpan::ble::hci::vendor::stm32wb::command::gap::{
+    AdvertisingDataType, DiscoverableParameters, GapCommands, Role,
+};
+use embassy_stm32_wpan::ble::hci::vendor::stm32wb::command::gatt::GattCommands;
+use embassy_stm32_wpan::ble::hci::vendor::stm32wb::command::hal::{ConfigData, HalCommands, PowerLevel};
+use embassy_stm32_wpan::ble::hci::BdAddr;
+use embassy_stm32_wpan::lhci::LhciC1DeviceInformationCcrp;
+use embassy_stm32_wpan::TlMbox;
+use {defmt_rtt as _, panic_probe as _};
+
+bind_interrupts!(struct Irqs{
+    IPCC_C1_RX => ReceiveInterruptHandler;
+    IPCC_C1_TX => TransmitInterruptHandler;
+});
+
+const BLE_GAP_DEVICE_NAME_LENGTH: u8 = 7;
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    /*
+        How to make this work:
+
+        - Obtain a NUCLEO-STM32WB55 from your preferred supplier.
+        - Download and Install STM32CubeProgrammer.
+        - Download stm32wb5x_FUS_fw.bin, stm32wb5x_BLE_Stack_full_fw.bin, and Release_Notes.html from
+          gh:STMicroelectronics/STM32CubeWB@2234d97/Projects/STM32WB_Copro_Wireless_Binaries/STM32WB5x
+        - Open STM32CubeProgrammer
+        - On the right-hand pane, click "firmware upgrade" to upgrade the st-link firmware.
+        - Once complete, click connect to connect to the device.
+        - On the left hand pane, click the RSS signal icon to open "Firmware Upgrade Services".
+        - In the Release_Notes.html, find the memory address that corresponds to your device for the stm32wb5x_FUS_fw.bin file
+        - Select that file, the memory address, "verify download", and then "Firmware Upgrade".
+        - Once complete, in the Release_Notes.html, find the memory address that corresponds to your device for the
+          stm32wb5x_BLE_Stack_full_fw.bin file. It should not be the same memory address.
+        - Select that file, the memory address, "verify download", and then "Firmware Upgrade".
+        - Select "Start Wireless Stack".
+        - Disconnect from the device.
+        - In the examples folder for stm32wb, modify the memory.x file to match your target device.
+        - Run this example.
+
+        Note: extended stack versions are not supported at this time. Do not attempt to install a stack with "extended" in the name.
+    */
+
+    let p = embassy_stm32::init(Default::default());
+    info!("Hello World!");
+
+    let config = Config::default();
+    let mut mbox = TlMbox::init(p.IPCC, Irqs, config);
+
+    let sys_event = mbox.sys_subsystem.read().await;
+    info!("sys event: {}", sys_event.payload());
+
+    mbox.sys_subsystem.shci_c2_ble_init(Default::default()).await;
+
+    info!("resetting BLE...");
+    mbox.ble_subsystem.reset().await;
+    let response = mbox.ble_subsystem.read().await.unwrap();
+    defmt::info!("{}", response);
+
+    info!("config public address...");
+    mbox.ble_subsystem
+        .write_config_data(&ConfigData::public_address(get_bd_addr()).build())
+        .await;
+    let response = mbox.ble_subsystem.read().await.unwrap();
+    defmt::info!("{}", response);
+
+    info!("config random address...");
+    mbox.ble_subsystem
+        .write_config_data(&ConfigData::random_address(get_random_addr()).build())
+        .await;
+    let response = mbox.ble_subsystem.read().await.unwrap();
+    defmt::info!("{}", response);
+
+    info!("config identity root...");
+    mbox.ble_subsystem
+        .write_config_data(&ConfigData::identity_root(&get_irk()).build())
+        .await;
+    let response = mbox.ble_subsystem.read().await.unwrap();
+    defmt::info!("{}", response);
+
+    info!("config encryption root...");
+    mbox.ble_subsystem
+        .write_config_data(&ConfigData::encryption_root(&get_erk()).build())
+        .await;
+    let response = mbox.ble_subsystem.read().await.unwrap();
+    defmt::info!("{}", response);
+
+    info!("config tx power level...");
+    mbox.ble_subsystem.set_tx_power_level(PowerLevel::ZerodBm).await;
+    let response = mbox.ble_subsystem.read().await.unwrap();
+    defmt::info!("{}", response);
+
+    info!("GATT init...");
+    mbox.ble_subsystem.init_gatt().await;
+    let response = mbox.ble_subsystem.read().await.unwrap();
+    defmt::info!("{}", response);
+
+    info!("GAP init...");
+    mbox.ble_subsystem
+        .init_gap(Role::PERIPHERAL, false, BLE_GAP_DEVICE_NAME_LENGTH)
+        .await;
+    let response = mbox.ble_subsystem.read().await.unwrap();
+    defmt::info!("{}", response);
+
+    // info!("set scan response...");
+    // mbox.ble_subsystem.le_set_scan_response_data(&[]).await.unwrap();
+    // let response = mbox.ble_subsystem.read().await.unwrap();
+    // defmt::info!("{}", response);
+
+    info!("set discoverable...");
+    mbox.ble_subsystem
+        .set_discoverable(&DiscoverableParameters {
+            advertising_type: AdvertisingType::NonConnectableUndirected,
+            advertising_interval: Some((Duration::from_millis(250), Duration::from_millis(250))),
+            address_type: OwnAddressType::Public,
+            filter_policy: AdvertisingFilterPolicy::AllowConnectionAndScan,
+            local_name: None,
+            advertising_data: &[],
+            conn_interval: (None, None),
+        })
+        .await
+        .unwrap();
+
+    let response = mbox.ble_subsystem.read().await;
+    defmt::info!("{}", response);
+
+    // remove some advertisement to decrease the packet size
+    info!("delete tx power ad type...");
+    mbox.ble_subsystem
+        .delete_ad_type(AdvertisingDataType::TxPowerLevel)
+        .await;
+    let response = mbox.ble_subsystem.read().await.unwrap();
+    defmt::info!("{}", response);
+
+    info!("delete conn interval ad type...");
+    mbox.ble_subsystem
+        .delete_ad_type(AdvertisingDataType::PeripheralConnectionInterval)
+        .await;
+    let response = mbox.ble_subsystem.read().await.unwrap();
+    defmt::info!("{}", response);
+
+    info!("update advertising data...");
+    mbox.ble_subsystem
+        .update_advertising_data(&eddystone_advertising_data())
+        .await
+        .unwrap();
+    let response = mbox.ble_subsystem.read().await.unwrap();
+    defmt::info!("{}", response);
+
+    info!("update advertising data type...");
+    mbox.ble_subsystem
+        .update_advertising_data(&[3, AdvertisingDataType::UuidCompleteList16 as u8, 0xaa, 0xfe])
+        .await
+        .unwrap();
+    let response = mbox.ble_subsystem.read().await.unwrap();
+    defmt::info!("{}", response);
+
+    info!("update advertising data flags...");
+    mbox.ble_subsystem
+        .update_advertising_data(&[
+            2,
+            AdvertisingDataType::Flags as u8,
+            (0x02 | 0x04) as u8, // BLE general discoverable, without BR/EDR support
+        ])
+        .await
+        .unwrap();
+    let response = mbox.ble_subsystem.read().await.unwrap();
+    defmt::info!("{}", response);
+
+    cortex_m::asm::wfi();
+}
+
+fn get_bd_addr() -> BdAddr {
+    let mut bytes = [0u8; 6];
+
+    let lhci_info = LhciC1DeviceInformationCcrp::new();
+    bytes[0] = (lhci_info.uid64 & 0xff) as u8;
+    bytes[1] = ((lhci_info.uid64 >> 8) & 0xff) as u8;
+    bytes[2] = ((lhci_info.uid64 >> 16) & 0xff) as u8;
+    bytes[3] = lhci_info.device_type_id;
+    bytes[4] = (lhci_info.st_company_id & 0xff) as u8;
+    bytes[5] = (lhci_info.st_company_id >> 8 & 0xff) as u8;
+
+    BdAddr(bytes)
+}
+
+fn get_random_addr() -> BdAddr {
+    let mut bytes = [0u8; 6];
+
+    let lhci_info = LhciC1DeviceInformationCcrp::new();
+    bytes[0] = (lhci_info.uid64 & 0xff) as u8;
+    bytes[1] = ((lhci_info.uid64 >> 8) & 0xff) as u8;
+    bytes[2] = ((lhci_info.uid64 >> 16) & 0xff) as u8;
+    bytes[3] = 0;
+    bytes[4] = 0x6E;
+    bytes[5] = 0xED;
+
+    BdAddr(bytes)
+}
+
+const BLE_CFG_IRK: [u8; 16] = [
+    0x12, 0x34, 0x56, 0x78, 0x9a, 0xbc, 0xde, 0xf0, 0x12, 0x34, 0x56, 0x78, 0x9a, 0xbc, 0xde, 0xf0,
+];
+const BLE_CFG_ERK: [u8; 16] = [
+    0xfe, 0xdc, 0xba, 0x09, 0x87, 0x65, 0x43, 0x21, 0xfe, 0xdc, 0xba, 0x09, 0x87, 0x65, 0x43, 0x21,
+];
+
+fn get_irk() -> EncryptionKey {
+    EncryptionKey(BLE_CFG_IRK)
+}
+
+fn get_erk() -> EncryptionKey {
+    EncryptionKey(BLE_CFG_ERK)
+}
+
+fn eddystone_advertising_data() -> [u8; 24] {
+    const EDDYSTONE_URL: &[u8] = b"www.rust-lang.com";
+
+    let mut service_data = [0u8; 24];
+    let url_len = EDDYSTONE_URL.len();
+
+    service_data[0] = 6 + url_len as u8;
+    service_data[1] = AdvertisingDataType::ServiceData as u8;
+
+    // 16-bit eddystone uuid
+    service_data[2] = 0xaa;
+    service_data[3] = 0xFE;
+
+    service_data[4] = 0x10; // URL frame type
+    service_data[5] = 22_i8 as u8; // calibrated TX power at 0m
+    service_data[6] = 0x03; // eddystone url prefix = https
+
+    service_data[7..(7 + url_len)].copy_from_slice(EDDYSTONE_URL);
+
+    service_data
+}
-- 
cgit 


From 810c6af77af037a658186f8b102980ee84164a05 Mon Sep 17 00:00:00 2001
From: goueslati <ghaith.oueslati@habemus.com>
Date: Thu, 22 Jun 2023 15:31:45 +0100
Subject: fix build

---
 examples/stm32wb/src/bin/tl_mbox_ble.rs | 4 ++--
 examples/stm32wb/src/bin/tl_mbox_mac.rs | 6 +++---
 2 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'examples')

diff --git a/examples/stm32wb/src/bin/tl_mbox_ble.rs b/examples/stm32wb/src/bin/tl_mbox_ble.rs
index 439bd01ac..a511e89aa 100644
--- a/examples/stm32wb/src/bin/tl_mbox_ble.rs
+++ b/examples/stm32wb/src/bin/tl_mbox_ble.rs
@@ -52,10 +52,10 @@ async fn main(_spawner: Spawner) {
     mbox.sys_subsystem.shci_c2_ble_init(Default::default()).await;
 
     info!("starting ble...");
-    mbox.ble_subsystem.write(0x0c, &[]).await;
+    mbox.ble_subsystem.tl_write(0x0c, &[]).await;
 
     info!("waiting for ble...");
-    let ble_event = mbox.ble_subsystem.read().await;
+    let ble_event = mbox.ble_subsystem.tl_read().await;
 
     info!("ble event: {}", ble_event.payload());
 
diff --git a/examples/stm32wb/src/bin/tl_mbox_mac.rs b/examples/stm32wb/src/bin/tl_mbox_mac.rs
index a42939bbd..6c8653cf4 100644
--- a/examples/stm32wb/src/bin/tl_mbox_mac.rs
+++ b/examples/stm32wb/src/bin/tl_mbox_mac.rs
@@ -46,16 +46,16 @@ async fn main(_spawner: Spawner) {
     let config = Config::default();
     let mbox = TlMbox::init(p.IPCC, Irqs, config);
 
-    let sys_event = mbox.sys_subsystem.read().await;
+    let sys_event = mbox.sys_subsystem.tl_read().await;
     info!("sys event: {}", sys_event.payload());
 
     mbox.sys_subsystem.shci_c2_mac_802_15_4_init().await;
     //
     //    info!("starting ble...");
-    //    mbox.ble_subsystem.write(0x0c, &[]).await;
+    //    mbox.ble_subsystem.t_write(0x0c, &[]).await;
     //
     //    info!("waiting for ble...");
-    //    let ble_event = mbox.ble_subsystem.read().await;
+    //    let ble_event = mbox.ble_subsystem.tl_read().await;
     //
     //    info!("ble event: {}", ble_event.payload());
 
-- 
cgit 


From 6c123596b7d48ee66ea93e8b1515e91231e9bced Mon Sep 17 00:00:00 2001
From: Dario Nieuwenhuis <dirbaio@dirbaio.net>
Date: Fri, 9 Jun 2023 03:36:48 +0200
Subject: wip: esp-hosted net driver.

---
 examples/nrf52840/Cargo.toml                 |   2 +
 examples/nrf52840/src/bin/wifi_esp_hosted.rs | 143 +++++++++++++++++++++++++++
 2 files changed, 145 insertions(+)
 create mode 100644 examples/nrf52840/src/bin/wifi_esp_hosted.rs

(limited to 'examples')

diff --git a/examples/nrf52840/Cargo.toml b/examples/nrf52840/Cargo.toml
index 6627b7861..7c9d48bad 100644
--- a/examples/nrf52840/Cargo.toml
+++ b/examples/nrf52840/Cargo.toml
@@ -22,6 +22,7 @@ embassy-lora = { version = "0.1.0", path = "../../embassy-lora", features = ["ti
 lora-phy = { version = "1", optional = true }
 lorawan-device = { version = "0.10.0", default-features = false, features = ["async", "external-lora-phy"], optional = true }
 lorawan = { version = "0.7.3", default-features = false, features = ["default-crypto"], optional = true }
+embassy-net-esp-hosted = { version = "0.1.0", path = "../../embassy-net-esp-hosted", features = ["defmt"] }
 
 defmt = "0.3"
 defmt-rtt = "0.4"
@@ -35,3 +36,4 @@ rand = { version = "0.8.4", default-features = false }
 embedded-storage = "0.3.0"
 usbd-hid = "0.6.0"
 serde = { version = "1.0.136", default-features = false }
+embedded-hal-async = "0.2.0-alpha.1"
diff --git a/examples/nrf52840/src/bin/wifi_esp_hosted.rs b/examples/nrf52840/src/bin/wifi_esp_hosted.rs
new file mode 100644
index 000000000..401dbd33c
--- /dev/null
+++ b/examples/nrf52840/src/bin/wifi_esp_hosted.rs
@@ -0,0 +1,143 @@
+#![no_std]
+#![no_main]
+#![feature(type_alias_impl_trait)]
+
+use defmt::{info, unwrap, warn};
+use embassy_executor::Spawner;
+use embassy_net::tcp::TcpSocket;
+use embassy_net::{Stack, StackResources};
+use embassy_nrf::gpio::{AnyPin, Input, Level, Output, OutputDrive, Pin, Pull};
+use embassy_nrf::rng::Rng;
+use embassy_nrf::spim::{self, Spim};
+use embassy_nrf::{bind_interrupts, peripherals};
+use embassy_time::{Duration, Timer};
+use embedded_hal_async::spi::ExclusiveDevice;
+use embedded_io::asynch::Write;
+use static_cell::make_static;
+use {defmt_rtt as _, embassy_net_esp_hosted as hosted, panic_probe as _};
+
+bind_interrupts!(struct Irqs {
+    SPIM3 => spim::InterruptHandler<peripherals::SPI3>;
+    RNG => embassy_nrf::rng::InterruptHandler<peripherals::RNG>;
+});
+
+#[embassy_executor::task]
+async fn wifi_task(
+    runner: hosted::Runner<
+        'static,
+        ExclusiveDevice<Spim<'static, peripherals::SPI3>, Output<'static, peripherals::P0_31>>,
+        Input<'static, AnyPin>,
+        Output<'static, peripherals::P1_03>,
+    >,
+) -> ! {
+    runner.run().await
+}
+
+#[embassy_executor::task]
+async fn net_task(stack: &'static Stack<hosted::NetDriver<'static>>) -> ! {
+    stack.run().await
+}
+
+#[embassy_executor::main]
+async fn main(spawner: Spawner) {
+    info!("Hello World!");
+
+    let p = embassy_nrf::init(Default::default());
+
+    let miso = p.P0_28;
+    let sck = p.P0_29;
+    let mosi = p.P0_30;
+    let cs = Output::new(p.P0_31, Level::High, OutputDrive::HighDrive);
+    let handshake = Input::new(p.P1_01.degrade(), Pull::Up);
+    let ready = Input::new(p.P1_02.degrade(), Pull::None);
+    let reset = Output::new(p.P1_03, Level::Low, OutputDrive::Standard);
+
+    let mut config = spim::Config::default();
+    config.frequency = spim::Frequency::M1;
+    config.mode = spim::MODE_2; // !!!
+    let spi = spim::Spim::new(p.SPI3, Irqs, sck, miso, mosi, config);
+    let spi = ExclusiveDevice::new(spi, cs);
+
+    let (device, mut control, runner) = embassy_net_esp_hosted::new(
+        make_static!(embassy_net_esp_hosted::State::new()),
+        spi,
+        handshake,
+        ready,
+        reset,
+    )
+    .await;
+
+    unwrap!(spawner.spawn(wifi_task(runner)));
+
+    // TODO: wait for ESP_INIT event instead of hardcoding delay.
+    Timer::after(Duration::from_secs(3)).await;
+
+    control.init().await;
+    control.join(env!("WIFI_NETWORK"), env!("WIFI_PASSWORD")).await;
+
+    let config = embassy_net::Config::dhcpv4(Default::default());
+    // let config = embassy_net::Config::ipv4_static(embassy_net::StaticConfigV4 {
+    //    address: Ipv4Cidr::new(Ipv4Address::new(10, 42, 0, 61), 24),
+    //    dns_servers: Vec::new(),
+    //    gateway: Some(Ipv4Address::new(10, 42, 0, 1)),
+    // });
+
+    // Generate random seed
+    let mut rng = Rng::new(p.RNG, Irqs);
+    let mut seed = [0; 8];
+    rng.blocking_fill_bytes(&mut seed);
+    let seed = u64::from_le_bytes(seed);
+
+    // Init network stack
+    let stack = &*make_static!(Stack::new(
+        device,
+        config,
+        make_static!(StackResources::<2>::new()),
+        seed
+    ));
+
+    unwrap!(spawner.spawn(net_task(stack)));
+
+    // And now we can use it!
+
+    let mut rx_buffer = [0; 4096];
+    let mut tx_buffer = [0; 4096];
+    let mut buf = [0; 4096];
+
+    loop {
+        let mut socket = TcpSocket::new(stack, &mut rx_buffer, &mut tx_buffer);
+        socket.set_timeout(Some(embassy_time::Duration::from_secs(10)));
+
+        info!("Listening on TCP:1234...");
+        if let Err(e) = socket.accept(1234).await {
+            warn!("accept error: {:?}", e);
+            continue;
+        }
+
+        info!("Received connection from {:?}", socket.remote_endpoint());
+
+        loop {
+            let n = match socket.read(&mut buf).await {
+                Ok(0) => {
+                    warn!("read EOF");
+                    break;
+                }
+                Ok(n) => n,
+                Err(e) => {
+                    warn!("read error: {:?}", e);
+                    break;
+                }
+            };
+
+            info!("rxd {:02x}", &buf[..n]);
+
+            match socket.write_all(&buf[..n]).await {
+                Ok(()) => {}
+                Err(e) => {
+                    warn!("write error: {:?}", e);
+                    break;
+                }
+            };
+        }
+    }
+}
-- 
cgit 


From 764b43e82c7b61c21621c1fd9f5fd2f6a3dc419c Mon Sep 17 00:00:00 2001
From: Dario Nieuwenhuis <dirbaio@dirbaio.net>
Date: Wed, 21 Jun 2023 19:05:20 +0200
Subject: esp-hosted: wait for esp firmware init.

---
 examples/nrf52840/src/bin/wifi_esp_hosted.rs | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'examples')

diff --git a/examples/nrf52840/src/bin/wifi_esp_hosted.rs b/examples/nrf52840/src/bin/wifi_esp_hosted.rs
index 401dbd33c..b75756f76 100644
--- a/examples/nrf52840/src/bin/wifi_esp_hosted.rs
+++ b/examples/nrf52840/src/bin/wifi_esp_hosted.rs
@@ -69,9 +69,6 @@ async fn main(spawner: Spawner) {
 
     unwrap!(spawner.spawn(wifi_task(runner)));
 
-    // TODO: wait for ESP_INIT event instead of hardcoding delay.
-    Timer::after(Duration::from_secs(3)).await;
-
     control.init().await;
     control.join(env!("WIFI_NETWORK"), env!("WIFI_PASSWORD")).await;
 
-- 
cgit 


From 1ed909ea74bfff75bd91b35739a44c5128271571 Mon Sep 17 00:00:00 2001
From: Dario Nieuwenhuis <dirbaio@dirbaio.net>
Date: Wed, 21 Jun 2023 19:08:09 +0200
Subject: esp-hosted: fix warnings.

---
 examples/nrf52840/src/bin/wifi_esp_hosted.rs | 1 -
 1 file changed, 1 deletion(-)

(limited to 'examples')

diff --git a/examples/nrf52840/src/bin/wifi_esp_hosted.rs b/examples/nrf52840/src/bin/wifi_esp_hosted.rs
index b75756f76..cea45c5c8 100644
--- a/examples/nrf52840/src/bin/wifi_esp_hosted.rs
+++ b/examples/nrf52840/src/bin/wifi_esp_hosted.rs
@@ -10,7 +10,6 @@ use embassy_nrf::gpio::{AnyPin, Input, Level, Output, OutputDrive, Pin, Pull};
 use embassy_nrf::rng::Rng;
 use embassy_nrf::spim::{self, Spim};
 use embassy_nrf::{bind_interrupts, peripherals};
-use embassy_time::{Duration, Timer};
 use embedded_hal_async::spi::ExclusiveDevice;
 use embedded_io::asynch::Write;
 use static_cell::make_static;
-- 
cgit 


From 0d02298ea628b9d2154fd05db7975f62b8d12edb Mon Sep 17 00:00:00 2001
From: Dario Nieuwenhuis <dirbaio@dirbaio.net>
Date: Thu, 22 Jun 2023 15:30:26 +0200
Subject: esp-hosted: fix build on stable.

---
 examples/nrf52840/Cargo.toml | 24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

(limited to 'examples')

diff --git a/examples/nrf52840/Cargo.toml b/examples/nrf52840/Cargo.toml
index 7c9d48bad..8c4175966 100644
--- a/examples/nrf52840/Cargo.toml
+++ b/examples/nrf52840/Cargo.toml
@@ -6,8 +6,24 @@ license = "MIT OR Apache-2.0"
 
 [features]
 default = ["nightly"]
-nightly = ["embassy-executor/nightly", "embassy-nrf/nightly", "embassy-net/nightly", "embassy-nrf/unstable-traits", "embassy-time/nightly", "embassy-time/unstable-traits", "static_cell/nightly",
-           "embassy-usb", "embedded-io/async", "embassy-net", "embassy-lora", "lora-phy", "lorawan-device", "lorawan"]
+nightly = [
+    "embedded-hal-async",
+    "embassy-executor/nightly",
+    "embassy-nrf/nightly",
+    "embassy-net/nightly",
+    "embassy-net-esp-hosted",
+    "embassy-nrf/unstable-traits",
+    "embassy-time/nightly",
+    "embassy-time/unstable-traits",
+    "static_cell/nightly",
+    "embassy-usb",
+    "embedded-io/async",
+    "embassy-net",
+    "embassy-lora",
+    "lora-phy",
+    "lorawan-device",
+    "lorawan",
+]
 
 [dependencies]
 embassy-futures = { version = "0.1.0", path = "../../embassy-futures" }
@@ -22,7 +38,7 @@ embassy-lora = { version = "0.1.0", path = "../../embassy-lora", features = ["ti
 lora-phy = { version = "1", optional = true }
 lorawan-device = { version = "0.10.0", default-features = false, features = ["async", "external-lora-phy"], optional = true }
 lorawan = { version = "0.7.3", default-features = false, features = ["default-crypto"], optional = true }
-embassy-net-esp-hosted = { version = "0.1.0", path = "../../embassy-net-esp-hosted", features = ["defmt"] }
+embassy-net-esp-hosted = { version = "0.1.0", path = "../../embassy-net-esp-hosted", features = ["defmt"], optional = true }
 
 defmt = "0.3"
 defmt-rtt = "0.4"
@@ -36,4 +52,4 @@ rand = { version = "0.8.4", default-features = false }
 embedded-storage = "0.3.0"
 usbd-hid = "0.6.0"
 serde = { version = "1.0.136", default-features = false }
-embedded-hal-async = "0.2.0-alpha.1"
+embedded-hal-async = { version = "0.2.0-alpha.1", optional = true }
-- 
cgit 


From 8bbfa6827cd68f67a50a89b13947542e632d5411 Mon Sep 17 00:00:00 2001
From: Dario Nieuwenhuis <dirbaio@dirbaio.net>
Date: Thu, 22 Jun 2023 21:11:53 +0200
Subject: esp-hosted: add perf hil test.

---
 examples/nrf52840/src/bin/wifi_esp_hosted.rs | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'examples')

diff --git a/examples/nrf52840/src/bin/wifi_esp_hosted.rs b/examples/nrf52840/src/bin/wifi_esp_hosted.rs
index cea45c5c8..4eb31b105 100644
--- a/examples/nrf52840/src/bin/wifi_esp_hosted.rs
+++ b/examples/nrf52840/src/bin/wifi_esp_hosted.rs
@@ -26,7 +26,7 @@ async fn wifi_task(
         'static,
         ExclusiveDevice<Spim<'static, peripherals::SPI3>, Output<'static, peripherals::P0_31>>,
         Input<'static, AnyPin>,
-        Output<'static, peripherals::P1_03>,
+        Output<'static, peripherals::P1_05>,
     >,
 ) -> ! {
     runner.run().await
@@ -48,11 +48,11 @@ async fn main(spawner: Spawner) {
     let mosi = p.P0_30;
     let cs = Output::new(p.P0_31, Level::High, OutputDrive::HighDrive);
     let handshake = Input::new(p.P1_01.degrade(), Pull::Up);
-    let ready = Input::new(p.P1_02.degrade(), Pull::None);
-    let reset = Output::new(p.P1_03, Level::Low, OutputDrive::Standard);
+    let ready = Input::new(p.P1_04.degrade(), Pull::None);
+    let reset = Output::new(p.P1_05, Level::Low, OutputDrive::Standard);
 
     let mut config = spim::Config::default();
-    config.frequency = spim::Frequency::M1;
+    config.frequency = spim::Frequency::M32;
     config.mode = spim::MODE_2; // !!!
     let spi = spim::Spim::new(p.SPI3, Irqs, sck, miso, mosi, config);
     let spi = ExclusiveDevice::new(spi, cs);
-- 
cgit 


From caf63b9e7336ed3ddb0dc997d431f15a26ae7693 Mon Sep 17 00:00:00 2001
From: xoviat <xoviat@users.noreply.github.com>
Date: Thu, 22 Jun 2023 21:05:51 -0500
Subject: stm32/tests: update ble test

---
 examples/stm32wb/Cargo.toml             | 5 ++++-
 examples/stm32wb/src/bin/tl_mbox_mac.rs | 2 +-
 2 files changed, 5 insertions(+), 2 deletions(-)

(limited to 'examples')

diff --git a/examples/stm32wb/Cargo.toml b/examples/stm32wb/Cargo.toml
index 726cd10d4..fbb2d918b 100644
--- a/examples/stm32wb/Cargo.toml
+++ b/examples/stm32wb/Cargo.toml
@@ -37,4 +37,7 @@ required-features = ["mac"]
 
 [[bin]] 
 name = "eddystone_beacon"
-required-features = ["ble"]
\ No newline at end of file
+required-features = ["ble"]
+
+[patch.crates-io]
+stm32wb-hci = { git = "https://github.com/OueslatiGhaith/stm32wb-hci", rev = "9f663be"}
\ No newline at end of file
diff --git a/examples/stm32wb/src/bin/tl_mbox_mac.rs b/examples/stm32wb/src/bin/tl_mbox_mac.rs
index 6c8653cf4..afd319a41 100644
--- a/examples/stm32wb/src/bin/tl_mbox_mac.rs
+++ b/examples/stm32wb/src/bin/tl_mbox_mac.rs
@@ -46,7 +46,7 @@ async fn main(_spawner: Spawner) {
     let config = Config::default();
     let mbox = TlMbox::init(p.IPCC, Irqs, config);
 
-    let sys_event = mbox.sys_subsystem.tl_read().await;
+    let sys_event = mbox.sys_subsystem.read().await;
     info!("sys event: {}", sys_event.payload());
 
     mbox.sys_subsystem.shci_c2_mac_802_15_4_init().await;
-- 
cgit 


From 29f32ce00ec0f50ef5e3b29c7e50f7f5479b4967 Mon Sep 17 00:00:00 2001
From: xoviat <xoviat@users.noreply.github.com>
Date: Fri, 23 Jun 2023 17:54:06 -0500
Subject: stm32/wpan: reorg subsystems

---
 examples/stm32wb/src/bin/eddystone_beacon.rs | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

(limited to 'examples')

diff --git a/examples/stm32wb/src/bin/eddystone_beacon.rs b/examples/stm32wb/src/bin/eddystone_beacon.rs
index fdd5be4a2..b99f8cb2e 100644
--- a/examples/stm32wb/src/bin/eddystone_beacon.rs
+++ b/examples/stm32wb/src/bin/eddystone_beacon.rs
@@ -8,15 +8,15 @@ use defmt::*;
 use embassy_executor::Spawner;
 use embassy_stm32::bind_interrupts;
 use embassy_stm32::ipcc::{Config, ReceiveInterruptHandler, TransmitInterruptHandler};
-use embassy_stm32_wpan::ble::hci::host::uart::UartHci;
-use embassy_stm32_wpan::ble::hci::host::{AdvertisingFilterPolicy, EncryptionKey, HostHci, OwnAddressType};
-use embassy_stm32_wpan::ble::hci::types::AdvertisingType;
-use embassy_stm32_wpan::ble::hci::vendor::stm32wb::command::gap::{
+use embassy_stm32_wpan::hci::host::uart::UartHci;
+use embassy_stm32_wpan::hci::host::{AdvertisingFilterPolicy, EncryptionKey, HostHci, OwnAddressType};
+use embassy_stm32_wpan::hci::types::AdvertisingType;
+use embassy_stm32_wpan::hci::vendor::stm32wb::command::gap::{
     AdvertisingDataType, DiscoverableParameters, GapCommands, Role,
 };
-use embassy_stm32_wpan::ble::hci::vendor::stm32wb::command::gatt::GattCommands;
-use embassy_stm32_wpan::ble::hci::vendor::stm32wb::command::hal::{ConfigData, HalCommands, PowerLevel};
-use embassy_stm32_wpan::ble::hci::BdAddr;
+use embassy_stm32_wpan::hci::vendor::stm32wb::command::gatt::GattCommands;
+use embassy_stm32_wpan::hci::vendor::stm32wb::command::hal::{ConfigData, HalCommands, PowerLevel};
+use embassy_stm32_wpan::hci::BdAddr;
 use embassy_stm32_wpan::lhci::LhciC1DeviceInformationCcrp;
 use embassy_stm32_wpan::TlMbox;
 use {defmt_rtt as _, panic_probe as _};
-- 
cgit 


From 018622f607a17037903ef7c5592dda762002f89b Mon Sep 17 00:00:00 2001
From: xoviat <xoviat@users.noreply.github.com>
Date: Sun, 25 Jun 2023 11:38:48 -0500
Subject: stm32/wpan: update example

---
 examples/stm32wb/src/bin/tl_mbox_mac.rs | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'examples')

diff --git a/examples/stm32wb/src/bin/tl_mbox_mac.rs b/examples/stm32wb/src/bin/tl_mbox_mac.rs
index afd319a41..f67be4682 100644
--- a/examples/stm32wb/src/bin/tl_mbox_mac.rs
+++ b/examples/stm32wb/src/bin/tl_mbox_mac.rs
@@ -49,7 +49,9 @@ async fn main(_spawner: Spawner) {
     let sys_event = mbox.sys_subsystem.read().await;
     info!("sys event: {}", sys_event.payload());
 
-    mbox.sys_subsystem.shci_c2_mac_802_15_4_init().await;
+    let result = mbox.sys_subsystem.shci_c2_mac_802_15_4_init().await;
+    info!("initialized mac: {}", result);
+
     //
     //    info!("starting ble...");
     //    mbox.ble_subsystem.t_write(0x0c, &[]).await;
-- 
cgit 


From 12872ce49b3945c1a28ae362f78bcfb334a9eeb8 Mon Sep 17 00:00:00 2001
From: Dániel Buga <bugadani@gmail.com>
Date: Sun, 25 Jun 2023 23:03:14 +0200
Subject: Modify an example

---
 examples/nrf52840/src/bin/self_spawn.rs | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'examples')

diff --git a/examples/nrf52840/src/bin/self_spawn.rs b/examples/nrf52840/src/bin/self_spawn.rs
index 196255a52..31ea6c81e 100644
--- a/examples/nrf52840/src/bin/self_spawn.rs
+++ b/examples/nrf52840/src/bin/self_spawn.rs
@@ -7,7 +7,11 @@ use embassy_executor::Spawner;
 use embassy_time::{Duration, Timer};
 use {defmt_rtt as _, panic_probe as _};
 
-#[embassy_executor::task(pool_size = 2)]
+mod config {
+    pub const MY_TASK_POOL_SIZE: usize = 2;
+}
+
+#[embassy_executor::task(pool_size = config::MY_TASK_POOL_SIZE)]
 async fn my_task(spawner: Spawner, n: u32) {
     Timer::after(Duration::from_secs(1)).await;
     info!("Spawning self! {}", n);
-- 
cgit 


From 219ef5b37a1dff5f6e770da252ec010d55c43257 Mon Sep 17 00:00:00 2001
From: Dario Nieuwenhuis <dirbaio@dirbaio.net>
Date: Tue, 27 Jun 2023 08:42:51 +0200
Subject: stm32/otg: add VBUS detection.

Fixes #1442.
---
 examples/stm32f4/src/bin/usb_ethernet.rs | 4 +++-
 examples/stm32f4/src/bin/usb_serial.rs   | 4 +++-
 examples/stm32f7/src/bin/usb_serial.rs   | 4 +++-
 examples/stm32h7/src/bin/usb_serial.rs   | 4 +++-
 examples/stm32l4/src/bin/usb_serial.rs   | 4 +++-
 examples/stm32u5/src/bin/usb_serial.rs   | 4 +++-
 6 files changed, 18 insertions(+), 6 deletions(-)

(limited to 'examples')

diff --git a/examples/stm32f4/src/bin/usb_ethernet.rs b/examples/stm32f4/src/bin/usb_ethernet.rs
index 953d99a45..b1f01417c 100644
--- a/examples/stm32f4/src/bin/usb_ethernet.rs
+++ b/examples/stm32f4/src/bin/usb_ethernet.rs
@@ -52,7 +52,9 @@ async fn main(spawner: Spawner) {
 
     // Create the driver, from the HAL.
     let ep_out_buffer = &mut make_static!([0; 256])[..];
-    let driver = Driver::new_fs(p.USB_OTG_FS, Irqs, p.PA12, p.PA11, ep_out_buffer);
+    let mut config = embassy_stm32::usb_otg::Config::default();
+    config.vbus_detection = true;
+    let driver = Driver::new_fs(p.USB_OTG_FS, Irqs, p.PA12, p.PA11, ep_out_buffer, config);
 
     // Create embassy-usb Config
     let mut config = embassy_usb::Config::new(0xc0de, 0xcafe);
diff --git a/examples/stm32f4/src/bin/usb_serial.rs b/examples/stm32f4/src/bin/usb_serial.rs
index f8f5940a7..4ff6452ef 100644
--- a/examples/stm32f4/src/bin/usb_serial.rs
+++ b/examples/stm32f4/src/bin/usb_serial.rs
@@ -29,7 +29,9 @@ async fn main(_spawner: Spawner) {
 
     // Create the driver, from the HAL.
     let mut ep_out_buffer = [0u8; 256];
-    let driver = Driver::new_fs(p.USB_OTG_FS, Irqs, p.PA12, p.PA11, &mut ep_out_buffer);
+    let mut config = embassy_stm32::usb_otg::Config::default();
+    config.vbus_detection = true;
+    let driver = Driver::new_fs(p.USB_OTG_FS, Irqs, p.PA12, p.PA11, &mut ep_out_buffer, config);
 
     // Create embassy-usb Config
     let mut config = embassy_usb::Config::new(0xc0de, 0xcafe);
diff --git a/examples/stm32f7/src/bin/usb_serial.rs b/examples/stm32f7/src/bin/usb_serial.rs
index 763309ce2..a2c76178b 100644
--- a/examples/stm32f7/src/bin/usb_serial.rs
+++ b/examples/stm32f7/src/bin/usb_serial.rs
@@ -30,7 +30,9 @@ async fn main(_spawner: Spawner) {
 
     // Create the driver, from the HAL.
     let mut ep_out_buffer = [0u8; 256];
-    let driver = Driver::new_fs(p.USB_OTG_FS, Irqs, p.PA12, p.PA11, &mut ep_out_buffer);
+    let mut config = embassy_stm32::usb_otg::Config::default();
+    config.vbus_detection = true;
+    let driver = Driver::new_fs(p.USB_OTG_FS, Irqs, p.PA12, p.PA11, &mut ep_out_buffer, config);
 
     // Create embassy-usb Config
     let mut config = embassy_usb::Config::new(0xc0de, 0xcafe);
diff --git a/examples/stm32h7/src/bin/usb_serial.rs b/examples/stm32h7/src/bin/usb_serial.rs
index c622f19f7..97291f60c 100644
--- a/examples/stm32h7/src/bin/usb_serial.rs
+++ b/examples/stm32h7/src/bin/usb_serial.rs
@@ -29,7 +29,9 @@ async fn main(_spawner: Spawner) {
 
     // Create the driver, from the HAL.
     let mut ep_out_buffer = [0u8; 256];
-    let driver = Driver::new_fs(p.USB_OTG_FS, Irqs, p.PA12, p.PA11, &mut ep_out_buffer);
+    let mut config = embassy_stm32::usb_otg::Config::default();
+    config.vbus_detection = true;
+    let driver = Driver::new_fs(p.USB_OTG_FS, Irqs, p.PA12, p.PA11, &mut ep_out_buffer, config);
 
     // Create embassy-usb Config
     let mut config = embassy_usb::Config::new(0xc0de, 0xcafe);
diff --git a/examples/stm32l4/src/bin/usb_serial.rs b/examples/stm32l4/src/bin/usb_serial.rs
index 80811a43e..410d6891b 100644
--- a/examples/stm32l4/src/bin/usb_serial.rs
+++ b/examples/stm32l4/src/bin/usb_serial.rs
@@ -30,7 +30,9 @@ async fn main(_spawner: Spawner) {
 
     // Create the driver, from the HAL.
     let mut ep_out_buffer = [0u8; 256];
-    let driver = Driver::new_fs(p.USB_OTG_FS, Irqs, p.PA12, p.PA11, &mut ep_out_buffer);
+    let mut config = embassy_stm32::usb_otg::Config::default();
+    config.vbus_detection = true;
+    let driver = Driver::new_fs(p.USB_OTG_FS, Irqs, p.PA12, p.PA11, &mut ep_out_buffer, config);
 
     // Create embassy-usb Config
     let mut config = embassy_usb::Config::new(0xc0de, 0xcafe);
diff --git a/examples/stm32u5/src/bin/usb_serial.rs b/examples/stm32u5/src/bin/usb_serial.rs
index f36daf91b..9e47fb18a 100644
--- a/examples/stm32u5/src/bin/usb_serial.rs
+++ b/examples/stm32u5/src/bin/usb_serial.rs
@@ -31,7 +31,9 @@ async fn main(_spawner: Spawner) {
 
     // Create the driver, from the HAL.
     let mut ep_out_buffer = [0u8; 256];
-    let driver = Driver::new_fs(p.USB_OTG_FS, Irqs, p.PA12, p.PA11, &mut ep_out_buffer);
+    let mut config = embassy_stm32::usb_otg::Config::default();
+    config.vbus_detection = true;
+    let driver = Driver::new_fs(p.USB_OTG_FS, Irqs, p.PA12, p.PA11, &mut ep_out_buffer, config);
 
     // Create embassy-usb Config
     let mut config = embassy_usb::Config::new(0xc0de, 0xcafe);
-- 
cgit 


From ed493be869fa653dc14d31060375e17e2469ce11 Mon Sep 17 00:00:00 2001
From: Dario Nieuwenhuis <dirbaio@dirbaio.net>
Date: Tue, 27 Jun 2023 23:49:30 +0200
Subject: stm32: update metapac, includes fix for OTG with 9 endpoints (H7)

---
 examples/stm32g4/src/bin/usb_serial.rs | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'examples')

diff --git a/examples/stm32g4/src/bin/usb_serial.rs b/examples/stm32g4/src/bin/usb_serial.rs
index c111a9787..289d0ed86 100644
--- a/examples/stm32g4/src/bin/usb_serial.rs
+++ b/examples/stm32g4/src/bin/usb_serial.rs
@@ -38,7 +38,9 @@ async fn main(_spawner: Spawner) {
     let p = embassy_stm32::init(config);
     info!("Hello World!");
 
-    pac::RCC.ccipr().write(|w| w.set_clk48sel(0b10));
+    pac::RCC.ccipr().write(|w| {
+        w.set_clk48sel(pac::rcc::vals::Clk48sel::PLLQCLK);
+    });
 
     let driver = Driver::new(p.USB, Irqs, p.PA12, p.PA11);
 
-- 
cgit 


From 91c31d5e437b510af3c535f5e597881042563496 Mon Sep 17 00:00:00 2001
From: JuliDi <20155974+JuliDi@users.noreply.github.com>
Date: Wed, 28 Jun 2023 11:58:25 +0200
Subject: Update DAC examples, add DAC + DMA example

---
 examples/stm32f4/src/bin/dac.rs     |   9 ++-
 examples/stm32h7/src/bin/dac.rs     |   9 ++-
 examples/stm32l4/Cargo.toml         |   2 +
 examples/stm32l4/src/bin/dac.rs     |  16 ++--
 examples/stm32l4/src/bin/dac_dma.rs | 148 ++++++++++++++++++++++++++++++++++++
 5 files changed, 166 insertions(+), 18 deletions(-)
 create mode 100644 examples/stm32l4/src/bin/dac_dma.rs

(limited to 'examples')

diff --git a/examples/stm32f4/src/bin/dac.rs b/examples/stm32f4/src/bin/dac.rs
index d97ae7082..3a6216712 100644
--- a/examples/stm32f4/src/bin/dac.rs
+++ b/examples/stm32f4/src/bin/dac.rs
@@ -4,7 +4,8 @@
 
 use defmt::*;
 use embassy_executor::Spawner;
-use embassy_stm32::dac::{Channel, Dac, Value};
+use embassy_stm32::dac::{DacCh1, DacChannel, Value};
+use embassy_stm32::dma::NoDma;
 use {defmt_rtt as _, panic_probe as _};
 
 #[embassy_executor::main]
@@ -12,12 +13,12 @@ async fn main(_spawner: Spawner) -> ! {
     let p = embassy_stm32::init(Default::default());
     info!("Hello World, dude!");
 
-    let mut dac = Dac::new_1ch(p.DAC, p.PA4);
+    let mut dac = DacCh1::new(p.DAC, NoDma, p.PA4);
 
     loop {
         for v in 0..=255 {
-            unwrap!(dac.set(Channel::Ch1, Value::Bit8(to_sine_wave(v))));
-            unwrap!(dac.trigger(Channel::Ch1));
+            unwrap!(dac.set(Value::Bit8(to_sine_wave(v))));
+            dac.trigger();
         }
     }
 }
diff --git a/examples/stm32h7/src/bin/dac.rs b/examples/stm32h7/src/bin/dac.rs
index f12716370..586b4154b 100644
--- a/examples/stm32h7/src/bin/dac.rs
+++ b/examples/stm32h7/src/bin/dac.rs
@@ -4,7 +4,8 @@
 
 use cortex_m_rt::entry;
 use defmt::*;
-use embassy_stm32::dac::{Channel, Dac, Value};
+use embassy_stm32::dac::{DacCh1, DacChannel, Value};
+use embassy_stm32::dma::NoDma;
 use embassy_stm32::time::mhz;
 use embassy_stm32::Config;
 use {defmt_rtt as _, panic_probe as _};
@@ -19,12 +20,12 @@ fn main() -> ! {
     config.rcc.pll1.q_ck = Some(mhz(100));
     let p = embassy_stm32::init(config);
 
-    let mut dac = Dac::new_1ch(p.DAC1, p.PA4);
+    let mut dac = DacCh1::new(p.DAC1, NoDma, p.PA4);
 
     loop {
         for v in 0..=255 {
-            unwrap!(dac.set(Channel::Ch1, Value::Bit8(to_sine_wave(v))));
-            unwrap!(dac.trigger(Channel::Ch1));
+            unwrap!(dac.set(Value::Bit8(to_sine_wave(v))));
+            dac.trigger();
         }
     }
 }
diff --git a/examples/stm32l4/Cargo.toml b/examples/stm32l4/Cargo.toml
index 3bb473ef5..d2d228282 100644
--- a/examples/stm32l4/Cargo.toml
+++ b/examples/stm32l4/Cargo.toml
@@ -25,3 +25,5 @@ futures = { version = "0.3.17", default-features = false, features = ["async-awa
 heapless = { version = "0.7.5", default-features = false }
 
 micromath = "2.0.0"
+
+static_cell = "1.0.0"
diff --git a/examples/stm32l4/src/bin/dac.rs b/examples/stm32l4/src/bin/dac.rs
index a36ed5d90..8aad27646 100644
--- a/examples/stm32l4/src/bin/dac.rs
+++ b/examples/stm32l4/src/bin/dac.rs
@@ -3,26 +3,22 @@
 #![feature(type_alias_impl_trait)]
 
 use defmt::*;
-use embassy_stm32::dac::{Channel, Dac, Value};
+use embassy_stm32::dac::{DacCh1, DacChannel, Value};
+use embassy_stm32::dma::NoDma;
 use embassy_stm32::pac;
 use {defmt_rtt as _, panic_probe as _};
 
 #[cortex_m_rt::entry]
 fn main() -> ! {
-    info!("Hello World!");
-
-    pac::RCC.apb1enr1().modify(|w| {
-        w.set_dac1en(true);
-    });
-
     let p = embassy_stm32::init(Default::default());
+    info!("Hello World!");
 
-    let mut dac = Dac::new_1ch(p.DAC1, p.PA4);
+    let mut dac = DacCh1::new(p.DAC1, NoDma, p.PA4);
 
     loop {
         for v in 0..=255 {
-            unwrap!(dac.set(Channel::Ch1, Value::Bit8(to_sine_wave(v))));
-            unwrap!(dac.trigger(Channel::Ch1));
+            unwrap!(dac.set(Value::Bit8(to_sine_wave(v))));
+            dac.trigger();
         }
     }
 }
diff --git a/examples/stm32l4/src/bin/dac_dma.rs b/examples/stm32l4/src/bin/dac_dma.rs
new file mode 100644
index 000000000..81e6a58e4
--- /dev/null
+++ b/examples/stm32l4/src/bin/dac_dma.rs
@@ -0,0 +1,148 @@
+#![no_std]
+#![no_main]
+#![feature(type_alias_impl_trait)]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_stm32::dac::{DacChannel, ValueArray};
+use embassy_stm32::pac::timer::vals::{Mms, Opm};
+use embassy_stm32::peripherals::{TIM6, TIM7};
+use embassy_stm32::rcc::low_level::RccPeripheral;
+use embassy_stm32::time::Hertz;
+use embassy_stm32::timer::low_level::Basic16bitInstance;
+use micromath::F32Ext;
+use static_cell::StaticCell;
+use {defmt_rtt as _, panic_probe as _};
+
+pub type Dac1Type<'d> =
+    embassy_stm32::dac::DacCh1<'d, embassy_stm32::peripherals::DAC1, embassy_stm32::peripherals::DMA1_CH3>;
+
+pub type Dac2Type<'d> =
+    embassy_stm32::dac::DacCh2<'d, embassy_stm32::peripherals::DAC1, embassy_stm32::peripherals::DMA1_CH4>;
+
+#[embassy_executor::main]
+async fn main(spawner: Spawner) {
+    let config = embassy_stm32::Config::default();
+
+    // Initialize the board and obtain a Peripherals instance
+    let p: embassy_stm32::Peripherals = embassy_stm32::init(config);
+
+    // Obtain two independent channels (p.DAC1 can only be consumed once, though!)
+    let (dac_ch1, dac_ch2) = embassy_stm32::dac::Dac::new(p.DAC1, p.DMA1_CH3, p.DMA1_CH4, p.PA4, p.PA5).split();
+
+    let dac1 = {
+        type T = impl Sized;
+        static STATIC_CELL: StaticCell<T> = StaticCell::new();
+        STATIC_CELL.init(dac_ch1)
+    };
+
+    let dac2 = {
+        type T = impl Sized;
+        static STATIC_CELL: StaticCell<T> = StaticCell::new();
+        STATIC_CELL.init(dac_ch2)
+    };
+
+    spawner.spawn(dac_task1(dac1)).ok();
+    spawner.spawn(dac_task2(dac2)).ok();
+}
+
+#[embassy_executor::task]
+async fn dac_task1(dac: &'static mut Dac1Type<'static>) {
+    let data: &[u8; 256] = &calculate_array::<256>();
+
+    info!("TIM6 frequency is {}", TIM6::frequency());
+    const FREQUENCY: Hertz = Hertz::hz(200);
+    let reload: u32 = (TIM6::frequency().0 / FREQUENCY.0) / data.len() as u32;
+
+    // Depends on your clock and on the specific chip used, you may need higher or lower values here
+    if reload < 10 {
+        error!("Reload value {} below threshold!", reload);
+    }
+
+    dac.select_trigger(embassy_stm32::dac::Ch1Trigger::Tim6).unwrap();
+    dac.enable_channel().unwrap();
+
+    TIM6::enable();
+    TIM6::regs().arr().modify(|w| w.set_arr(reload as u16 - 1));
+    TIM6::regs().cr2().modify(|w| w.set_mms(Mms::UPDATE));
+    TIM6::regs().cr1().modify(|w| {
+        w.set_opm(Opm::DISABLED);
+        w.set_cen(true);
+    });
+
+    debug!(
+        "TIM6 Frequency {}, Target Frequency {}, Reload {}, Reload as u16 {}, Samples {}",
+        TIM6::frequency(),
+        FREQUENCY,
+        reload,
+        reload as u16,
+        data.len()
+    );
+
+    // Loop technically not necessary if DMA circular mode is enabled
+    loop {
+        info!("Loop DAC1");
+        if let Err(e) = dac.write(ValueArray::Bit8(data), true).await {
+            error!("Could not write to dac: {}", e);
+        }
+    }
+}
+
+#[embassy_executor::task]
+async fn dac_task2(dac: &'static mut Dac2Type<'static>) {
+    let data: &[u8; 256] = &calculate_array::<256>();
+    
+    info!("TIM7 frequency is {}", TIM7::frequency());
+
+    const FREQUENCY: Hertz = Hertz::hz(600);
+    let reload: u32 = (TIM7::frequency().0 / FREQUENCY.0) / data.len() as u32;
+
+    if reload < 10 {
+        error!("Reload value {} below threshold!", reload);
+    }
+
+    TIM7::enable();
+    TIM7::regs().arr().modify(|w| w.set_arr(reload as u16 - 1));
+    TIM7::regs().cr2().modify(|w| w.set_mms(Mms::UPDATE));
+    TIM7::regs().cr1().modify(|w| {
+        w.set_opm(Opm::DISABLED);
+        w.set_cen(true);
+    });
+
+    dac.select_trigger(embassy_stm32::dac::Ch2Trigger::Tim7).unwrap();
+
+    debug!(
+        "TIM7 Frequency {}, Target Frequency {}, Reload {}, Reload as u16 {}, Samples {}",
+        TIM7::frequency(),
+        FREQUENCY,
+        reload,
+        reload as u16,
+        data.len()
+    );
+
+    if let Err(e) = dac.write(ValueArray::Bit8(data), true).await {
+        error!("Could not write to dac: {}", e);
+    }
+}
+
+fn to_sine_wave(v: u8) -> u8 {
+    if v >= 128 {
+        // top half
+        let r = 3.14 * ((v - 128) as f32 / 128.0);
+        (r.sin() * 128.0 + 127.0) as u8
+    } else {
+        // bottom half
+        let r = 3.14 + 3.14 * (v as f32 / 128.0);
+        (r.sin() * 128.0 + 127.0) as u8
+    }
+}
+
+fn calculate_array<const N: usize>() -> [u8; N] {
+    let mut res = [0; N];
+    let mut i = 0;
+    while i < N {
+        res[i] = to_sine_wave(i as u8);
+        i += 1;
+    }
+    res
+}
-- 
cgit 


From 27a89019adaebfd1916d3b71dde1db3a6a768883 Mon Sep 17 00:00:00 2001
From: JuliDi <20155974+JuliDi@users.noreply.github.com>
Date: Wed, 28 Jun 2023 15:21:24 +0200
Subject: add doc

---
 examples/stm32l4/src/bin/dac_dma.rs | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'examples')

diff --git a/examples/stm32l4/src/bin/dac_dma.rs b/examples/stm32l4/src/bin/dac_dma.rs
index 81e6a58e4..aefc8412f 100644
--- a/examples/stm32l4/src/bin/dac_dma.rs
+++ b/examples/stm32l4/src/bin/dac_dma.rs
@@ -52,6 +52,8 @@ async fn dac_task1(dac: &'static mut Dac1Type<'static>) {
 
     info!("TIM6 frequency is {}", TIM6::frequency());
     const FREQUENCY: Hertz = Hertz::hz(200);
+
+    // Compute the reload value such that we obtain the FREQUENCY for the sine
     let reload: u32 = (TIM6::frequency().0 / FREQUENCY.0) / data.len() as u32;
 
     // Depends on your clock and on the specific chip used, you may need higher or lower values here
-- 
cgit 


From f2e7a23148f0c1f663744bfe47fbbb37d9552080 Mon Sep 17 00:00:00 2001
From: JuliDi <20155974+JuliDi@users.noreply.github.com>
Date: Wed, 28 Jun 2023 15:25:57 +0200
Subject: attempt at fixing ci

---
 examples/stm32l4/.cargo/config.toml | 3 ++-
 examples/stm32l4/memory.x           | 8 ++++----
 examples/stm32l4/src/bin/dac_dma.rs | 2 +-
 3 files changed, 7 insertions(+), 6 deletions(-)

(limited to 'examples')

diff --git a/examples/stm32l4/.cargo/config.toml b/examples/stm32l4/.cargo/config.toml
index abf55eb2e..4ccdf121e 100644
--- a/examples/stm32l4/.cargo/config.toml
+++ b/examples/stm32l4/.cargo/config.toml
@@ -2,7 +2,8 @@
 # replace STM32F429ZITx with your chip as listed in `probe-rs-cli chip list`
 #runner = "probe-rs-cli run --chip STM32L475VGT6"
 #runner = "probe-rs-cli run --chip STM32L475VG"
-runner = "probe-rs-cli run --chip STM32L4S5VI"
+#runner = "probe-rs-cli run --chip STM32L4S5VI"
+runner = "probe-run --chip STM32L432KCUx"
 
 [build]
 target = "thumbv7em-none-eabi"
diff --git a/examples/stm32l4/memory.x b/examples/stm32l4/memory.x
index eb87d1b54..0cef526ae 100644
--- a/examples/stm32l4/memory.x
+++ b/examples/stm32l4/memory.x
@@ -1,7 +1,7 @@
 MEMORY
 {
-  /* NOTE 1 K = 1 KiBi = 1024 bytes */
-  /* These values correspond to the STM32L4S5 */
-  FLASH : ORIGIN = 0x08000000, LENGTH = 1024K
-  RAM : ORIGIN = 0x20000000, LENGTH = 128K
+  /* NOTE K = KiBi = 1024 bytes */
+  /* TODO Adjust these memory regions to match your device memory layout */
+  FLASH : ORIGIN = 0x8000000, LENGTH = 256K 
+  RAM : ORIGIN = 0x20000000, LENGTH = 64K
 }
diff --git a/examples/stm32l4/src/bin/dac_dma.rs b/examples/stm32l4/src/bin/dac_dma.rs
index aefc8412f..7c0df835b 100644
--- a/examples/stm32l4/src/bin/dac_dma.rs
+++ b/examples/stm32l4/src/bin/dac_dma.rs
@@ -93,7 +93,7 @@ async fn dac_task1(dac: &'static mut Dac1Type<'static>) {
 #[embassy_executor::task]
 async fn dac_task2(dac: &'static mut Dac2Type<'static>) {
     let data: &[u8; 256] = &calculate_array::<256>();
-    
+
     info!("TIM7 frequency is {}", TIM7::frequency());
 
     const FREQUENCY: Hertz = Hertz::hz(600);
-- 
cgit 


From 02f367f733591c9423731a86ea7726772a88dac0 Mon Sep 17 00:00:00 2001
From: JuliDi <20155974+JuliDi@users.noreply.github.com>
Date: Wed, 28 Jun 2023 15:28:10 +0200
Subject: attempt at fixing ci

---
 examples/stm32l4/src/bin/dac.rs | 1 -
 1 file changed, 1 deletion(-)

(limited to 'examples')

diff --git a/examples/stm32l4/src/bin/dac.rs b/examples/stm32l4/src/bin/dac.rs
index 8aad27646..ade43eb35 100644
--- a/examples/stm32l4/src/bin/dac.rs
+++ b/examples/stm32l4/src/bin/dac.rs
@@ -5,7 +5,6 @@
 use defmt::*;
 use embassy_stm32::dac::{DacCh1, DacChannel, Value};
 use embassy_stm32::dma::NoDma;
-use embassy_stm32::pac;
 use {defmt_rtt as _, panic_probe as _};
 
 #[cortex_m_rt::entry]
-- 
cgit 


From bf7e24e9d7abc5d31b75ef97418577920bd4600c Mon Sep 17 00:00:00 2001
From: JuliDi <20155974+JuliDi@users.noreply.github.com>
Date: Wed, 28 Jun 2023 15:37:29 +0200
Subject: revert to STM32L4S5VI

---
 examples/stm32l4/.cargo/config.toml | 3 +--
 examples/stm32l4/memory.x           | 8 ++++----
 2 files changed, 5 insertions(+), 6 deletions(-)

(limited to 'examples')

diff --git a/examples/stm32l4/.cargo/config.toml b/examples/stm32l4/.cargo/config.toml
index 4ccdf121e..abf55eb2e 100644
--- a/examples/stm32l4/.cargo/config.toml
+++ b/examples/stm32l4/.cargo/config.toml
@@ -2,8 +2,7 @@
 # replace STM32F429ZITx with your chip as listed in `probe-rs-cli chip list`
 #runner = "probe-rs-cli run --chip STM32L475VGT6"
 #runner = "probe-rs-cli run --chip STM32L475VG"
-#runner = "probe-rs-cli run --chip STM32L4S5VI"
-runner = "probe-run --chip STM32L432KCUx"
+runner = "probe-rs-cli run --chip STM32L4S5VI"
 
 [build]
 target = "thumbv7em-none-eabi"
diff --git a/examples/stm32l4/memory.x b/examples/stm32l4/memory.x
index 0cef526ae..eb87d1b54 100644
--- a/examples/stm32l4/memory.x
+++ b/examples/stm32l4/memory.x
@@ -1,7 +1,7 @@
 MEMORY
 {
-  /* NOTE K = KiBi = 1024 bytes */
-  /* TODO Adjust these memory regions to match your device memory layout */
-  FLASH : ORIGIN = 0x8000000, LENGTH = 256K 
-  RAM : ORIGIN = 0x20000000, LENGTH = 64K
+  /* NOTE 1 K = 1 KiBi = 1024 bytes */
+  /* These values correspond to the STM32L4S5 */
+  FLASH : ORIGIN = 0x08000000, LENGTH = 1024K
+  RAM : ORIGIN = 0x20000000, LENGTH = 128K
 }
-- 
cgit 


From d5898c11ebef63fa0ec6dba8381484f4cfabd65c Mon Sep 17 00:00:00 2001
From: JuliDi <20155974+JuliDi@users.noreply.github.com>
Date: Wed, 28 Jun 2023 16:40:50 +0200
Subject: remove need for StaticCell in dac_dma example for stm32l4

---
 examples/stm32l4/Cargo.toml         |  2 --
 examples/stm32l4/src/bin/dac_dma.rs | 29 ++++++++---------------------
 2 files changed, 8 insertions(+), 23 deletions(-)

(limited to 'examples')

diff --git a/examples/stm32l4/Cargo.toml b/examples/stm32l4/Cargo.toml
index d2d228282..3bb473ef5 100644
--- a/examples/stm32l4/Cargo.toml
+++ b/examples/stm32l4/Cargo.toml
@@ -25,5 +25,3 @@ futures = { version = "0.3.17", default-features = false, features = ["async-awa
 heapless = { version = "0.7.5", default-features = false }
 
 micromath = "2.0.0"
-
-static_cell = "1.0.0"
diff --git a/examples/stm32l4/src/bin/dac_dma.rs b/examples/stm32l4/src/bin/dac_dma.rs
index 7c0df835b..c27cc03e1 100644
--- a/examples/stm32l4/src/bin/dac_dma.rs
+++ b/examples/stm32l4/src/bin/dac_dma.rs
@@ -11,14 +11,13 @@ use embassy_stm32::rcc::low_level::RccPeripheral;
 use embassy_stm32::time::Hertz;
 use embassy_stm32::timer::low_level::Basic16bitInstance;
 use micromath::F32Ext;
-use static_cell::StaticCell;
 use {defmt_rtt as _, panic_probe as _};
 
-pub type Dac1Type<'d> =
-    embassy_stm32::dac::DacCh1<'d, embassy_stm32::peripherals::DAC1, embassy_stm32::peripherals::DMA1_CH3>;
+pub type Dac1Type =
+    embassy_stm32::dac::DacCh1<'static, embassy_stm32::peripherals::DAC1, embassy_stm32::peripherals::DMA1_CH3>;
 
-pub type Dac2Type<'d> =
-    embassy_stm32::dac::DacCh2<'d, embassy_stm32::peripherals::DAC1, embassy_stm32::peripherals::DMA1_CH4>;
+pub type Dac2Type =
+    embassy_stm32::dac::DacCh2<'static, embassy_stm32::peripherals::DAC1, embassy_stm32::peripherals::DMA1_CH4>;
 
 #[embassy_executor::main]
 async fn main(spawner: Spawner) {
@@ -30,24 +29,12 @@ async fn main(spawner: Spawner) {
     // Obtain two independent channels (p.DAC1 can only be consumed once, though!)
     let (dac_ch1, dac_ch2) = embassy_stm32::dac::Dac::new(p.DAC1, p.DMA1_CH3, p.DMA1_CH4, p.PA4, p.PA5).split();
 
-    let dac1 = {
-        type T = impl Sized;
-        static STATIC_CELL: StaticCell<T> = StaticCell::new();
-        STATIC_CELL.init(dac_ch1)
-    };
-
-    let dac2 = {
-        type T = impl Sized;
-        static STATIC_CELL: StaticCell<T> = StaticCell::new();
-        STATIC_CELL.init(dac_ch2)
-    };
-
-    spawner.spawn(dac_task1(dac1)).ok();
-    spawner.spawn(dac_task2(dac2)).ok();
+    spawner.spawn(dac_task1(dac_ch1)).ok();
+    spawner.spawn(dac_task2(dac_ch2)).ok();
 }
 
 #[embassy_executor::task]
-async fn dac_task1(dac: &'static mut Dac1Type<'static>) {
+async fn dac_task1(mut dac: Dac1Type) {
     let data: &[u8; 256] = &calculate_array::<256>();
 
     info!("TIM6 frequency is {}", TIM6::frequency());
@@ -91,7 +78,7 @@ async fn dac_task1(dac: &'static mut Dac1Type<'static>) {
 }
 
 #[embassy_executor::task]
-async fn dac_task2(dac: &'static mut Dac2Type<'static>) {
+async fn dac_task2(mut dac: Dac2Type) {
     let data: &[u8; 256] = &calculate_array::<256>();
 
     info!("TIM7 frequency is {}", TIM7::frequency());
-- 
cgit 


From 5666c569033d59fc894230ed4161e6c686733b2d Mon Sep 17 00:00:00 2001
From: Kevin Lannen <kevin@luci.com>
Date: Wed, 28 Jun 2023 13:05:39 -0600
Subject: STM32G4: Add CRS support to RCC

Create working CRS USB Example
---
 examples/stm32g4/src/bin/usb_serial.rs | 28 +++++++++++++++++++---------
 1 file changed, 19 insertions(+), 9 deletions(-)

(limited to 'examples')

diff --git a/examples/stm32g4/src/bin/usb_serial.rs b/examples/stm32g4/src/bin/usb_serial.rs
index 289d0ed86..77cfa67d3 100644
--- a/examples/stm32g4/src/bin/usb_serial.rs
+++ b/examples/stm32g4/src/bin/usb_serial.rs
@@ -4,10 +4,10 @@
 
 use defmt::{panic, *};
 use embassy_executor::Spawner;
-use embassy_stm32::rcc::{ClockSrc, Pll, PllM, PllN, PllQ, PllR, PllSrc};
+use embassy_stm32::rcc::{Clock48MhzSrc, ClockSrc, CrsConfig, CrsSyncSource, Pll, PllM, PllN, PllQ, PllR, PllSrc};
 use embassy_stm32::time::Hertz;
 use embassy_stm32::usb::{self, Driver, Instance};
-use embassy_stm32::{bind_interrupts, pac, peripherals, Config};
+use embassy_stm32::{bind_interrupts, peripherals, Config};
 use embassy_usb::class::cdc_acm::{CdcAcmClass, State};
 use embassy_usb::driver::EndpointError;
 use embassy_usb::Builder;
@@ -22,25 +22,35 @@ bind_interrupts!(struct Irqs {
 async fn main(_spawner: Spawner) {
     let mut config = Config::default();
 
+    // Change this to `false` to use the HSE clock source for the USB. This example assumes an 8MHz HSE.
+    const USE_HSI48: bool = true;
+
+    let pllq_div = if USE_HSI48 { None } else { Some(PllQ::Div6) };
+
     config.rcc.pll = Some(Pll {
-        source: PllSrc::HSE(Hertz(8000000)),
+        source: PllSrc::HSE(Hertz(8_000_000)),
         prediv_m: PllM::Div2,
         mul_n: PllN::Mul72,
         div_p: None,
-        // USB and CAN at 48 MHz
-        div_q: Some(PllQ::Div6),
+        div_q: pllq_div,
         // Main system clock at 144 MHz
         div_r: Some(PllR::Div2),
     });
 
     config.rcc.mux = ClockSrc::PLL;
 
+    if USE_HSI48 {
+        // Sets up the Clock Recovery System (CRS) to use the USB SOF to trim the HSI48 oscillator.
+        config.rcc.clock_48mhz_src = Some(Clock48MhzSrc::Hsi48(Some(CrsConfig {
+            sync_src: CrsSyncSource::Usb,
+        })));
+    } else {
+        config.rcc.clock_48mhz_src = Some(Clock48MhzSrc::PllQ);
+    }
+
     let p = embassy_stm32::init(config);
-    info!("Hello World!");
 
-    pac::RCC.ccipr().write(|w| {
-        w.set_clk48sel(pac::rcc::vals::Clk48sel::PLLQCLK);
-    });
+    info!("Hello World!");
 
     let driver = Driver::new(p.USB, Irqs, p.PA12, p.PA11);
 
-- 
cgit 


From f7ec579c18b2ec925afcd4ab9a840719f4ce08cc Mon Sep 17 00:00:00 2001
From: Dario Nieuwenhuis <dirbaio@dirbaio.net>
Date: Thu, 29 Jun 2023 02:39:28 +0200
Subject: Update probe-rs-cli -> probe-rs

---
 examples/boot/application/nrf/.cargo/config.toml     | 4 ++--
 examples/boot/application/rp/.cargo/config.toml      | 2 +-
 examples/boot/application/stm32f3/.cargo/config.toml | 4 ++--
 examples/boot/application/stm32f7/.cargo/config.toml | 4 ++--
 examples/boot/application/stm32h7/.cargo/config.toml | 4 ++--
 examples/boot/application/stm32h7/flash-boot.sh      | 2 +-
 examples/boot/application/stm32l0/.cargo/config.toml | 4 ++--
 examples/boot/application/stm32l1/.cargo/config.toml | 4 ++--
 examples/boot/application/stm32l4/.cargo/config.toml | 4 ++--
 examples/boot/application/stm32wl/.cargo/config.toml | 4 ++--
 examples/boot/bootloader/nrf/.cargo/config.toml      | 2 +-
 examples/boot/bootloader/rp/.cargo/config.toml       | 2 +-
 examples/nrf-rtos-trace/.cargo/config.toml           | 4 ++--
 examples/nrf52840-rtic/.cargo/config.toml            | 4 ++--
 examples/nrf52840/.cargo/config.toml                 | 4 ++--
 examples/nrf52840/src/bin/nvmc.rs                    | 2 +-
 examples/nrf52840/src/bin/wdt.rs                     | 2 +-
 examples/nrf5340/.cargo/config.toml                  | 4 ++--
 examples/rp/.cargo/config.toml                       | 2 +-
 examples/rp/src/bin/wifi_ap_tcp_server.rs            | 4 ++--
 examples/rp/src/bin/wifi_blinky.rs                   | 4 ++--
 examples/rp/src/bin/wifi_scan.rs                     | 4 ++--
 examples/rp/src/bin/wifi_tcp_server.rs               | 4 ++--
 examples/stm32c0/.cargo/config.toml                  | 4 ++--
 examples/stm32f0/.cargo/config.toml                  | 2 +-
 examples/stm32f1/.cargo/config.toml                  | 4 ++--
 examples/stm32f2/.cargo/config.toml                  | 4 ++--
 examples/stm32f3/.cargo/config.toml                  | 4 ++--
 examples/stm32f4/.cargo/config.toml                  | 4 ++--
 examples/stm32f7/.cargo/config.toml                  | 4 ++--
 examples/stm32g0/.cargo/config.toml                  | 4 ++--
 examples/stm32g4/.cargo/config.toml                  | 4 ++--
 examples/stm32h5/.cargo/config.toml                  | 2 +-
 examples/stm32h7/.cargo/config.toml                  | 2 +-
 examples/stm32l0/.cargo/config.toml                  | 4 ++--
 examples/stm32l1/.cargo/config.toml                  | 4 ++--
 examples/stm32l4/.cargo/config.toml                  | 8 ++++----
 examples/stm32l5/.cargo/config.toml                  | 4 ++--
 examples/stm32u5/.cargo/config.toml                  | 4 ++--
 examples/stm32wb/.cargo/config.toml                  | 4 ++--
 examples/stm32wl/.cargo/config.toml                  | 4 ++--
 41 files changed, 74 insertions(+), 74 deletions(-)

(limited to 'examples')

diff --git a/examples/boot/application/nrf/.cargo/config.toml b/examples/boot/application/nrf/.cargo/config.toml
index 3872e7189..17616a054 100644
--- a/examples/boot/application/nrf/.cargo/config.toml
+++ b/examples/boot/application/nrf/.cargo/config.toml
@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace nRF82840_xxAA with your chip as listed in `probe-rs-cli chip list`
-runner = "probe-rs-cli run --chip nRF52840_xxAA"
+# replace nRF82840_xxAA with your chip as listed in `probe-rs chip list`
+runner = "probe-rs run --chip nRF52840_xxAA"
 
 [build]
 target = "thumbv7em-none-eabi"
diff --git a/examples/boot/application/rp/.cargo/config.toml b/examples/boot/application/rp/.cargo/config.toml
index 278c24a57..cd8d1ef02 100644
--- a/examples/boot/application/rp/.cargo/config.toml
+++ b/examples/boot/application/rp/.cargo/config.toml
@@ -3,7 +3,7 @@ build-std = ["core"]
 build-std-features = ["panic_immediate_abort"]
 
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-runner = "probe-rs-cli run --chip RP2040"
+runner = "probe-rs run --chip RP2040"
 
 [build]
 target = "thumbv6m-none-eabi"
diff --git a/examples/boot/application/stm32f3/.cargo/config.toml b/examples/boot/application/stm32f3/.cargo/config.toml
index 9fc2396e8..4a7ec0a5b 100644
--- a/examples/boot/application/stm32f3/.cargo/config.toml
+++ b/examples/boot/application/stm32f3/.cargo/config.toml
@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32F429ZITx with your chip as listed in `probe-rs-cli chip list`
-runner = "probe-rs-cli run --chip STM32F303VCTx"
+# replace STM32F429ZITx with your chip as listed in `probe-rs chip list`
+runner = "probe-rs run --chip STM32F303VCTx"
 
 [build]
 target = "thumbv7em-none-eabihf"
diff --git a/examples/boot/application/stm32f7/.cargo/config.toml b/examples/boot/application/stm32f7/.cargo/config.toml
index 7d6c88a99..9088eea6e 100644
--- a/examples/boot/application/stm32f7/.cargo/config.toml
+++ b/examples/boot/application/stm32f7/.cargo/config.toml
@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32F429ZITx with your chip as listed in `probe-rs-cli chip list`
-runner = "probe-rs-cli run --chip STM32F767ZITx"
+# replace STM32F429ZITx with your chip as listed in `probe-rs chip list`
+runner = "probe-rs run --chip STM32F767ZITx"
 
 [build]
 target = "thumbv7em-none-eabihf"
diff --git a/examples/boot/application/stm32h7/.cargo/config.toml b/examples/boot/application/stm32h7/.cargo/config.toml
index 067a5c89b..caa0d3a93 100644
--- a/examples/boot/application/stm32h7/.cargo/config.toml
+++ b/examples/boot/application/stm32h7/.cargo/config.toml
@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32F429ZITx with your chip as listed in `probe-rs-cli chip list`
-runner = "probe-rs-cli run --chip STM32H743ZITx"
+# replace STM32F429ZITx with your chip as listed in `probe-rs chip list`
+runner = "probe-rs run --chip STM32H743ZITx"
 
 [build]
 target = "thumbv7em-none-eabihf"
diff --git a/examples/boot/application/stm32h7/flash-boot.sh b/examples/boot/application/stm32h7/flash-boot.sh
index a3003681a..4912a50b7 100755
--- a/examples/boot/application/stm32h7/flash-boot.sh
+++ b/examples/boot/application/stm32h7/flash-boot.sh
@@ -1,5 +1,5 @@
 #!/bin/bash
-probe-rs-cli erase --chip STM32H743ZITx
+probe-rs erase --chip STM32H743ZITx
 mv ../../bootloader/stm32/memory.x ../../bootloader/stm32/memory-old.x
 cp memory-bl.x ../../bootloader/stm32/memory.x
 
diff --git a/examples/boot/application/stm32l0/.cargo/config.toml b/examples/boot/application/stm32l0/.cargo/config.toml
index ce0e460bd..6099f015c 100644
--- a/examples/boot/application/stm32l0/.cargo/config.toml
+++ b/examples/boot/application/stm32l0/.cargo/config.toml
@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace your chip as listed in `probe-rs-cli chip list`
-runner = "probe-rs-cli run --chip STM32L072CZTx"
+# replace your chip as listed in `probe-rs chip list`
+runner = "probe-rs run --chip STM32L072CZTx"
 
 [build]
 target = "thumbv6m-none-eabi"
diff --git a/examples/boot/application/stm32l1/.cargo/config.toml b/examples/boot/application/stm32l1/.cargo/config.toml
index 1401500a0..9cabd14ba 100644
--- a/examples/boot/application/stm32l1/.cargo/config.toml
+++ b/examples/boot/application/stm32l1/.cargo/config.toml
@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace your chip as listed in `probe-rs-cli chip list`
-runner = "probe-rs-cli run --chip STM32L151CBxxA"
+# replace your chip as listed in `probe-rs chip list`
+runner = "probe-rs run --chip STM32L151CBxxA"
 
 [build]
 target = "thumbv7m-none-eabi"
diff --git a/examples/boot/application/stm32l4/.cargo/config.toml b/examples/boot/application/stm32l4/.cargo/config.toml
index 48ff3734b..c803215f6 100644
--- a/examples/boot/application/stm32l4/.cargo/config.toml
+++ b/examples/boot/application/stm32l4/.cargo/config.toml
@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace your chip as listed in `probe-rs-cli chip list`
-runner = "probe-rs-cli run --chip STM32L475VG"
+# replace your chip as listed in `probe-rs chip list`
+runner = "probe-rs run --chip STM32L475VG"
 
 [build]
 target = "thumbv7em-none-eabihf"
diff --git a/examples/boot/application/stm32wl/.cargo/config.toml b/examples/boot/application/stm32wl/.cargo/config.toml
index b49b582e0..4f8094ff2 100644
--- a/examples/boot/application/stm32wl/.cargo/config.toml
+++ b/examples/boot/application/stm32wl/.cargo/config.toml
@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace your chip as listed in `probe-rs-cli chip list`
-runner = "probe-rs-cli run --chip STM32WLE5JCIx"
+# replace your chip as listed in `probe-rs chip list`
+runner = "probe-rs run --chip STM32WLE5JCIx"
 
 [build]
 target = "thumbv7em-none-eabihf"
diff --git a/examples/boot/bootloader/nrf/.cargo/config.toml b/examples/boot/bootloader/nrf/.cargo/config.toml
index d636b1d23..c292846aa 100644
--- a/examples/boot/bootloader/nrf/.cargo/config.toml
+++ b/examples/boot/bootloader/nrf/.cargo/config.toml
@@ -4,7 +4,7 @@ build-std-features = ["panic_immediate_abort"]
 
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
 #runner = "./fruitrunner"
-runner = "probe-rs-cli run --chip nrf52840_xxAA"
+runner = "probe-rs run --chip nrf52840_xxAA"
 
 rustflags = [
   # Code-size optimizations.
diff --git a/examples/boot/bootloader/rp/.cargo/config.toml b/examples/boot/bootloader/rp/.cargo/config.toml
index 795ee043a..9d48ecdc9 100644
--- a/examples/boot/bootloader/rp/.cargo/config.toml
+++ b/examples/boot/bootloader/rp/.cargo/config.toml
@@ -1,5 +1,5 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-runner = "probe-rs-cli run --chip RP2040"
+runner = "probe-rs run --chip RP2040"
 
 [build]
 target = "thumbv6m-none-eabi"
diff --git a/examples/nrf-rtos-trace/.cargo/config.toml b/examples/nrf-rtos-trace/.cargo/config.toml
index 3872e7189..17616a054 100644
--- a/examples/nrf-rtos-trace/.cargo/config.toml
+++ b/examples/nrf-rtos-trace/.cargo/config.toml
@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace nRF82840_xxAA with your chip as listed in `probe-rs-cli chip list`
-runner = "probe-rs-cli run --chip nRF52840_xxAA"
+# replace nRF82840_xxAA with your chip as listed in `probe-rs chip list`
+runner = "probe-rs run --chip nRF52840_xxAA"
 
 [build]
 target = "thumbv7em-none-eabi"
diff --git a/examples/nrf52840-rtic/.cargo/config.toml b/examples/nrf52840-rtic/.cargo/config.toml
index 3872e7189..17616a054 100644
--- a/examples/nrf52840-rtic/.cargo/config.toml
+++ b/examples/nrf52840-rtic/.cargo/config.toml
@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace nRF82840_xxAA with your chip as listed in `probe-rs-cli chip list`
-runner = "probe-rs-cli run --chip nRF52840_xxAA"
+# replace nRF82840_xxAA with your chip as listed in `probe-rs chip list`
+runner = "probe-rs run --chip nRF52840_xxAA"
 
 [build]
 target = "thumbv7em-none-eabi"
diff --git a/examples/nrf52840/.cargo/config.toml b/examples/nrf52840/.cargo/config.toml
index 3872e7189..17616a054 100644
--- a/examples/nrf52840/.cargo/config.toml
+++ b/examples/nrf52840/.cargo/config.toml
@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace nRF82840_xxAA with your chip as listed in `probe-rs-cli chip list`
-runner = "probe-rs-cli run --chip nRF52840_xxAA"
+# replace nRF82840_xxAA with your chip as listed in `probe-rs chip list`
+runner = "probe-rs run --chip nRF52840_xxAA"
 
 [build]
 target = "thumbv7em-none-eabi"
diff --git a/examples/nrf52840/src/bin/nvmc.rs b/examples/nrf52840/src/bin/nvmc.rs
index 33a44516d..31c6fe4b6 100644
--- a/examples/nrf52840/src/bin/nvmc.rs
+++ b/examples/nrf52840/src/bin/nvmc.rs
@@ -14,7 +14,7 @@ async fn main(_spawner: Spawner) {
     let p = embassy_nrf::init(Default::default());
     info!("Hello NVMC!");
 
-    // probe-rs-cli run breaks without this, I'm not sure why.
+    // probe-rs run breaks without this, I'm not sure why.
     Timer::after(Duration::from_secs(1)).await;
 
     let mut f = Nvmc::new(p.NVMC);
diff --git a/examples/nrf52840/src/bin/wdt.rs b/examples/nrf52840/src/bin/wdt.rs
index ccfd0e439..058746518 100644
--- a/examples/nrf52840/src/bin/wdt.rs
+++ b/examples/nrf52840/src/bin/wdt.rs
@@ -16,7 +16,7 @@ async fn main(_spawner: Spawner) {
     let mut config = Config::default();
     config.timeout_ticks = 32768 * 3; // 3 seconds
 
-    // This is needed for `probe-rs-cli run` to be able to catch the panic message
+    // This is needed for `probe-rs run` to be able to catch the panic message
     // in the WDT interrupt. The core resets 2 ticks after firing the interrupt.
     config.run_during_debug_halt = false;
 
diff --git a/examples/nrf5340/.cargo/config.toml b/examples/nrf5340/.cargo/config.toml
index d25355894..4c3cf3d32 100644
--- a/examples/nrf5340/.cargo/config.toml
+++ b/examples/nrf5340/.cargo/config.toml
@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace nRF5340_xxAA with your chip as listed in `probe-rs-cli chip list`
-runner = "probe-rs-cli run --chip nRF5340_xxAA"
+# replace nRF5340_xxAA with your chip as listed in `probe-rs chip list`
+runner = "probe-rs run --chip nRF5340_xxAA"
 
 [build]
 target = "thumbv8m.main-none-eabihf"
diff --git a/examples/rp/.cargo/config.toml b/examples/rp/.cargo/config.toml
index 2ee6fcb00..3d7d61740 100644
--- a/examples/rp/.cargo/config.toml
+++ b/examples/rp/.cargo/config.toml
@@ -1,5 +1,5 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-runner = "probe-rs-cli run --chip RP2040"
+runner = "probe-rs run --chip RP2040"
 
 [build]
 target = "thumbv6m-none-eabi"        # Cortex-M0 and Cortex-M0+
diff --git a/examples/rp/src/bin/wifi_ap_tcp_server.rs b/examples/rp/src/bin/wifi_ap_tcp_server.rs
index e8197390c..310e84d92 100644
--- a/examples/rp/src/bin/wifi_ap_tcp_server.rs
+++ b/examples/rp/src/bin/wifi_ap_tcp_server.rs
@@ -42,8 +42,8 @@ async fn main(spawner: Spawner) {
 
     // To make flashing faster for development, you may want to flash the firmwares independently
     // at hardcoded addresses, instead of baking them into the program with `include_bytes!`:
-    //     probe-rs-cli download 43439A0.bin --format bin --chip RP2040 --base-address 0x10100000
-    //     probe-rs-cli download 43439A0_clm.bin --format bin --chip RP2040 --base-address 0x10140000
+    //     probe-rs download 43439A0.bin --format bin --chip RP2040 --base-address 0x10100000
+    //     probe-rs download 43439A0_clm.bin --format bin --chip RP2040 --base-address 0x10140000
     //let fw = unsafe { core::slice::from_raw_parts(0x10100000 as *const u8, 224190) };
     //let clm = unsafe { core::slice::from_raw_parts(0x10140000 as *const u8, 4752) };
 
diff --git a/examples/rp/src/bin/wifi_blinky.rs b/examples/rp/src/bin/wifi_blinky.rs
index be965807b..bbcb1b5ec 100644
--- a/examples/rp/src/bin/wifi_blinky.rs
+++ b/examples/rp/src/bin/wifi_blinky.rs
@@ -27,8 +27,8 @@ async fn main(spawner: Spawner) {
 
     // To make flashing faster for development, you may want to flash the firmwares independently
     // at hardcoded addresses, instead of baking them into the program with `include_bytes!`:
-    //     probe-rs-cli download 43439A0.bin --format bin --chip RP2040 --base-address 0x10100000
-    //     probe-rs-cli download 43439A0_clm.bin --format bin --chip RP2040 --base-address 0x10140000
+    //     probe-rs download 43439A0.bin --format bin --chip RP2040 --base-address 0x10100000
+    //     probe-rs download 43439A0_clm.bin --format bin --chip RP2040 --base-address 0x10140000
     //let fw = unsafe { core::slice::from_raw_parts(0x10100000 as *const u8, 224190) };
     //let clm = unsafe { core::slice::from_raw_parts(0x10140000 as *const u8, 4752) };
 
diff --git a/examples/rp/src/bin/wifi_scan.rs b/examples/rp/src/bin/wifi_scan.rs
index 79534f229..391e12282 100644
--- a/examples/rp/src/bin/wifi_scan.rs
+++ b/examples/rp/src/bin/wifi_scan.rs
@@ -39,8 +39,8 @@ async fn main(spawner: Spawner) {
 
     // To make flashing faster for development, you may want to flash the firmwares independently
     // at hardcoded addresses, instead of baking them into the program with `include_bytes!`:
-    //     probe-rs-cli download 43439A0.bin --format bin --chip RP2040 --base-address 0x10100000
-    //     probe-rs-cli download 43439A0_clm.bin --format bin --chip RP2040 --base-address 0x10140000
+    //     probe-rs download 43439A0.bin --format bin --chip RP2040 --base-address 0x10100000
+    //     probe-rs download 43439A0_clm.bin --format bin --chip RP2040 --base-address 0x10140000
     //let fw = unsafe { core::slice::from_raw_parts(0x10100000 as *const u8, 224190) };
     //let clm = unsafe { core::slice::from_raw_parts(0x10140000 as *const u8, 4752) };
 
diff --git a/examples/rp/src/bin/wifi_tcp_server.rs b/examples/rp/src/bin/wifi_tcp_server.rs
index 026e056fa..e9d1079a6 100644
--- a/examples/rp/src/bin/wifi_tcp_server.rs
+++ b/examples/rp/src/bin/wifi_tcp_server.rs
@@ -42,8 +42,8 @@ async fn main(spawner: Spawner) {
 
     // To make flashing faster for development, you may want to flash the firmwares independently
     // at hardcoded addresses, instead of baking them into the program with `include_bytes!`:
-    //     probe-rs-cli download 43439A0.bin --format bin --chip RP2040 --base-address 0x10100000
-    //     probe-rs-cli download 43439A0_clm.bin --format bin --chip RP2040 --base-address 0x10140000
+    //     probe-rs download 43439A0.bin --format bin --chip RP2040 --base-address 0x10100000
+    //     probe-rs download 43439A0_clm.bin --format bin --chip RP2040 --base-address 0x10140000
     //let fw = unsafe { core::slice::from_raw_parts(0x10100000 as *const u8, 224190) };
     //let clm = unsafe { core::slice::from_raw_parts(0x10140000 as *const u8, 4752) };
 
diff --git a/examples/stm32c0/.cargo/config.toml b/examples/stm32c0/.cargo/config.toml
index 517101fae..29a8be7e1 100644
--- a/examples/stm32c0/.cargo/config.toml
+++ b/examples/stm32c0/.cargo/config.toml
@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32G071C8Rx with your chip as listed in `probe-rs-cli chip list`
-runner = "probe-rs-cli run --speed 100 --chip STM32c031c6tx"
+# replace STM32G071C8Rx with your chip as listed in `probe-rs chip list`
+runner = "probe-rs run --speed 100 --chip STM32c031c6tx"
 
 [build]
 target = "thumbv6m-none-eabi"
diff --git a/examples/stm32f0/.cargo/config.toml b/examples/stm32f0/.cargo/config.toml
index bd0c0cd97..def4c8c92 100644
--- a/examples/stm32f0/.cargo/config.toml
+++ b/examples/stm32f0/.cargo/config.toml
@@ -1,5 +1,5 @@
 [target.thumbv6m-none-eabi]
-runner = 'probe-rs-cli run --chip STM32F091RCTX'
+runner = 'probe-rs run --chip STM32F091RCTX'
 
 [build]
 target = "thumbv6m-none-eabi"
diff --git a/examples/stm32f1/.cargo/config.toml b/examples/stm32f1/.cargo/config.toml
index 81199c5aa..ce6fef11b 100644
--- a/examples/stm32f1/.cargo/config.toml
+++ b/examples/stm32f1/.cargo/config.toml
@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32F103C8 with your chip as listed in `probe-rs-cli chip list`
-runner = "probe-rs-cli run --chip STM32F103C8"
+# replace STM32F103C8 with your chip as listed in `probe-rs chip list`
+runner = "probe-rs run --chip STM32F103C8"
 
 [build]
 target = "thumbv7m-none-eabi"
diff --git a/examples/stm32f2/.cargo/config.toml b/examples/stm32f2/.cargo/config.toml
index 5532779c8..1198fcab8 100644
--- a/examples/stm32f2/.cargo/config.toml
+++ b/examples/stm32f2/.cargo/config.toml
@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32F207ZGTx with your chip as listed in `probe-rs-cli chip list`
-runner = "probe-rs-cli run --chip STM32F207ZGTx"
+# replace STM32F207ZGTx with your chip as listed in `probe-rs chip list`
+runner = "probe-rs run --chip STM32F207ZGTx"
 
 [build]
 target = "thumbv7m-none-eabi"
diff --git a/examples/stm32f3/.cargo/config.toml b/examples/stm32f3/.cargo/config.toml
index 7f3fda529..cb8a7c5af 100644
--- a/examples/stm32f3/.cargo/config.toml
+++ b/examples/stm32f3/.cargo/config.toml
@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32F429ZITx with your chip as listed in `probe-rs-cli chip list`
-runner = "probe-rs-cli run --chip STM32F303ZETx"
+# replace STM32F429ZITx with your chip as listed in `probe-rs chip list`
+runner = "probe-rs run --chip STM32F303ZETx"
 
 [build]
 target = "thumbv7em-none-eabihf"
diff --git a/examples/stm32f4/.cargo/config.toml b/examples/stm32f4/.cargo/config.toml
index bed04b68f..16efa8e6f 100644
--- a/examples/stm32f4/.cargo/config.toml
+++ b/examples/stm32f4/.cargo/config.toml
@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32F429ZITx with your chip as listed in `probe-rs-cli chip list`
-runner = "probe-rs-cli run --chip STM32F429ZITx"
+# replace STM32F429ZITx with your chip as listed in `probe-rs chip list`
+runner = "probe-rs run --chip STM32F429ZITx"
 
 [build]
 target = "thumbv7em-none-eabi"
diff --git a/examples/stm32f7/.cargo/config.toml b/examples/stm32f7/.cargo/config.toml
index 7d6c88a99..9088eea6e 100644
--- a/examples/stm32f7/.cargo/config.toml
+++ b/examples/stm32f7/.cargo/config.toml
@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32F429ZITx with your chip as listed in `probe-rs-cli chip list`
-runner = "probe-rs-cli run --chip STM32F767ZITx"
+# replace STM32F429ZITx with your chip as listed in `probe-rs chip list`
+runner = "probe-rs run --chip STM32F767ZITx"
 
 [build]
 target = "thumbv7em-none-eabihf"
diff --git a/examples/stm32g0/.cargo/config.toml b/examples/stm32g0/.cargo/config.toml
index a7a5fbd84..35cca5412 100644
--- a/examples/stm32g0/.cargo/config.toml
+++ b/examples/stm32g0/.cargo/config.toml
@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32G071C8Rx with your chip as listed in `probe-rs-cli chip list`
-runner = "probe-rs-cli run --chip STM32G071RBTx"
+# replace STM32G071C8Rx with your chip as listed in `probe-rs chip list`
+runner = "probe-rs run --chip STM32G071RBTx"
 
 [build]
 target = "thumbv6m-none-eabi"
diff --git a/examples/stm32g4/.cargo/config.toml b/examples/stm32g4/.cargo/config.toml
index 606d7d5a3..d28ad069e 100644
--- a/examples/stm32g4/.cargo/config.toml
+++ b/examples/stm32g4/.cargo/config.toml
@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32G071C8Rx with your chip as listed in `probe-rs-cli chip list`
-runner = "probe-rs-cli run --chip STM32G484VETx"
+# replace STM32G071C8Rx with your chip as listed in `probe-rs chip list`
+runner = "probe-rs run --chip STM32G484VETx"
 
 [build]
 target = "thumbv7em-none-eabi"
diff --git a/examples/stm32h5/.cargo/config.toml b/examples/stm32h5/.cargo/config.toml
index c8b864b6c..478146142 100644
--- a/examples/stm32h5/.cargo/config.toml
+++ b/examples/stm32h5/.cargo/config.toml
@@ -1,5 +1,5 @@
 [target.thumbv8m.main-none-eabihf]
-runner = 'probe-rs-cli run --chip STM32H563ZITx'
+runner = 'probe-rs run --chip STM32H563ZITx'
 
 [build]
 target = "thumbv8m.main-none-eabihf"
diff --git a/examples/stm32h7/.cargo/config.toml b/examples/stm32h7/.cargo/config.toml
index f08f57a54..5f680dbce 100644
--- a/examples/stm32h7/.cargo/config.toml
+++ b/examples/stm32h7/.cargo/config.toml
@@ -1,5 +1,5 @@
 [target.thumbv7em-none-eabihf]
-runner = 'probe-rs-cli run --chip STM32H743ZITx'
+runner = 'probe-rs run --chip STM32H743ZITx'
 
 [build]
 target = "thumbv7em-none-eabihf" # Cortex-M4F and Cortex-M7F (with FPU)
diff --git a/examples/stm32l0/.cargo/config.toml b/examples/stm32l0/.cargo/config.toml
index 526f5a1f7..b050334b2 100644
--- a/examples/stm32l0/.cargo/config.toml
+++ b/examples/stm32l0/.cargo/config.toml
@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace your chip as listed in `probe-rs-cli chip list`
-runner = "probe-rs-cli run --chip STM32L053R8Tx"
+# replace your chip as listed in `probe-rs chip list`
+runner = "probe-rs run --chip STM32L053R8Tx"
 
 [build]
 target = "thumbv6m-none-eabi"
diff --git a/examples/stm32l1/.cargo/config.toml b/examples/stm32l1/.cargo/config.toml
index 1401500a0..9cabd14ba 100644
--- a/examples/stm32l1/.cargo/config.toml
+++ b/examples/stm32l1/.cargo/config.toml
@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace your chip as listed in `probe-rs-cli chip list`
-runner = "probe-rs-cli run --chip STM32L151CBxxA"
+# replace your chip as listed in `probe-rs chip list`
+runner = "probe-rs run --chip STM32L151CBxxA"
 
 [build]
 target = "thumbv7m-none-eabi"
diff --git a/examples/stm32l4/.cargo/config.toml b/examples/stm32l4/.cargo/config.toml
index abf55eb2e..36e74e5a5 100644
--- a/examples/stm32l4/.cargo/config.toml
+++ b/examples/stm32l4/.cargo/config.toml
@@ -1,8 +1,8 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32F429ZITx with your chip as listed in `probe-rs-cli chip list`
-#runner = "probe-rs-cli run --chip STM32L475VGT6"
-#runner = "probe-rs-cli run --chip STM32L475VG"
-runner = "probe-rs-cli run --chip STM32L4S5VI"
+# replace STM32F429ZITx with your chip as listed in `probe-rs chip list`
+#runner = "probe-rs run --chip STM32L475VGT6"
+#runner = "probe-rs run --chip STM32L475VG"
+runner = "probe-rs run --chip STM32L4S5VI"
 
 [build]
 target = "thumbv7em-none-eabi"
diff --git a/examples/stm32l5/.cargo/config.toml b/examples/stm32l5/.cargo/config.toml
index 1dc3a6fb7..86a145a27 100644
--- a/examples/stm32l5/.cargo/config.toml
+++ b/examples/stm32l5/.cargo/config.toml
@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32L552ZETxQ with your chip as listed in `probe-rs-cli chip list`
-runner = "probe-rs-cli run --chip STM32L552ZETxQ"
+# replace STM32L552ZETxQ with your chip as listed in `probe-rs chip list`
+runner = "probe-rs run --chip STM32L552ZETxQ"
 
 [build]
 target = "thumbv8m.main-none-eabihf"
diff --git a/examples/stm32u5/.cargo/config.toml b/examples/stm32u5/.cargo/config.toml
index cecd01938..36c5b63a6 100644
--- a/examples/stm32u5/.cargo/config.toml
+++ b/examples/stm32u5/.cargo/config.toml
@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32U585AIIx with your chip as listed in `probe-rs-cli chip list`
-runner = "probe-rs-cli run --chip STM32U585AIIx"
+# replace STM32U585AIIx with your chip as listed in `probe-rs chip list`
+runner = "probe-rs run --chip STM32U585AIIx"
 
 [build]
 target = "thumbv8m.main-none-eabihf"
diff --git a/examples/stm32wb/.cargo/config.toml b/examples/stm32wb/.cargo/config.toml
index 35317a297..8b6d6d754 100644
--- a/examples/stm32wb/.cargo/config.toml
+++ b/examples/stm32wb/.cargo/config.toml
@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32WB55CCUx with your chip as listed in `probe-rs-cli chip list`
-# runner = "probe-rs-cli run --chip STM32WB55RGVx --speed 1000 --connect-under-reset"
+# replace STM32WB55CCUx with your chip as listed in `probe-rs chip list`
+# runner = "probe-rs run --chip STM32WB55RGVx --speed 1000 --connect-under-reset"
 runner = "teleprobe local run --chip STM32WB55RG --elf"
 
 [build]
diff --git a/examples/stm32wl/.cargo/config.toml b/examples/stm32wl/.cargo/config.toml
index b49b582e0..4f8094ff2 100644
--- a/examples/stm32wl/.cargo/config.toml
+++ b/examples/stm32wl/.cargo/config.toml
@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace your chip as listed in `probe-rs-cli chip list`
-runner = "probe-rs-cli run --chip STM32WLE5JCIx"
+# replace your chip as listed in `probe-rs chip list`
+runner = "probe-rs run --chip STM32WLE5JCIx"
 
 [build]
 target = "thumbv7em-none-eabihf"
-- 
cgit 


From 6eac49186d5a5da4c310027e59adcd0bf44ae514 Mon Sep 17 00:00:00 2001
From: Dario Nieuwenhuis <dirbaio@dirbaio.net>
Date: Thu, 29 Jun 2023 19:51:16 +0200
Subject: Release embassy-net v0.1

---
 examples/std/README.md | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 examples/std/README.md

(limited to 'examples')

diff --git a/examples/std/README.md b/examples/std/README.md
new file mode 100644
index 000000000..adc795928
--- /dev/null
+++ b/examples/std/README.md
@@ -0,0 +1,23 @@
+
+## Running the `embassy-net` examples
+
+First, create the tap0 interface. You only need to do this once.
+
+```sh
+sudo ip tuntap add name tap0 mode tap user $USER
+sudo ip link set tap0 up
+sudo ip addr add 192.168.69.100/24 dev tap0
+sudo ip -6 addr add fe80::100/64 dev tap0
+sudo ip -6 addr add fdaa::100/64 dev tap0
+sudo ip -6 route add fe80::/64 dev tap0
+sudo ip -6 route add fdaa::/64 dev tap0
+```
+
+Second, have something listening there. For example `nc -l 8000`
+
+Then run the example located in the `examples` folder:
+
+```sh
+cd $EMBASSY_ROOT/examples/std/
+cargo run --bin net -- --static-ip
+```
\ No newline at end of file
-- 
cgit