From 80c504cd950349caa96ae37898f6f3325030c615 Mon Sep 17 00:00:00 2001 From: Dario Nieuwenhuis Date: Mon, 14 Dec 2020 00:36:29 +0100 Subject: Add std impl for rand --- examples/.cargo/config | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 examples/.cargo/config (limited to 'examples') diff --git a/examples/.cargo/config b/examples/.cargo/config new file mode 100644 index 000000000..3f319ae55 --- /dev/null +++ b/examples/.cargo/config @@ -0,0 +1,27 @@ +[target.'cfg(all(target_arch = "arm", target_os = "none"))'] +runner = "probe-run --chip nRF52840_xxAA --defmt" + +rustflags = [ + # LLD (shipped with the Rust toolchain) is used as the default linker + "-C", "link-arg=--nmagic", + "-C", "link-arg=-Tlink.x", + "-C", "link-arg=-Tdefmt.x", + + # if you run into problems with LLD switch to the GNU linker by commenting out + # this line + # "-C", "linker=arm-none-eabi-ld", + + # if you need to link to pre-compiled C libraries provided by a C toolchain + # use GCC as the linker by commenting out both lines above and then + # uncommenting the three lines below + # "-C", "linker=arm-none-eabi-gcc", + # "-C", "link-arg=-Wl,-Tlink.x", + # "-C", "link-arg=-nostartfiles", +] + +[build] +# Pick ONE of these compilation targets +# target = "thumbv6m-none-eabi" # Cortex-M0 and Cortex-M0+ +# target = "thumbv7m-none-eabi" # Cortex-M3 +# target = "thumbv7em-none-eabi" # Cortex-M4 and Cortex-M7 (no FPU) +target = "thumbv7em-none-eabihf" # Cortex-M4F and Cortex-M7F (with FPU) -- cgit