From 2f60d78ea318f51ff59868c348b77cf880012198 Mon Sep 17 00:00:00 2001 From: Kevin Date: Sun, 15 Sep 2024 02:44:16 +0200 Subject: Add OTG_HS support for STM32H7R/S --- examples/stm32h7rs/src/bin/usb_serial.rs | 139 +++++++++++++++++++++++++++++++ 1 file changed, 139 insertions(+) create mode 100644 examples/stm32h7rs/src/bin/usb_serial.rs (limited to 'examples') diff --git a/examples/stm32h7rs/src/bin/usb_serial.rs b/examples/stm32h7rs/src/bin/usb_serial.rs new file mode 100644 index 000000000..5a234e898 --- /dev/null +++ b/examples/stm32h7rs/src/bin/usb_serial.rs @@ -0,0 +1,139 @@ +#![no_std] +#![no_main] + +use defmt::{panic, *}; +use embassy_executor::Spawner; +use embassy_futures::join::join; +use embassy_stm32::time::Hertz; +use embassy_stm32::usb::{Driver, Instance}; +use embassy_stm32::{bind_interrupts, peripherals, usb, Config}; +use embassy_usb::class::cdc_acm::{CdcAcmClass, State}; +use embassy_usb::driver::EndpointError; +use embassy_usb::Builder; +use {defmt_rtt as _, panic_probe as _}; + +bind_interrupts!(struct Irqs { + OTG_HS => usb::InterruptHandler; +}); + +// If you are trying this and your USB device doesn't connect, the most +// common issues are the RCC config and vbus_detection +// +// See https://embassy.dev/book/#_the_usb_examples_are_not_working_on_my_board_is_there_anything_else_i_need_to_configure +// for more information. +#[embassy_executor::main] +async fn main(_spawner: Spawner) { + info!("Hello World!"); + + let mut config = Config::default(); + + { + use embassy_stm32::rcc::*; + config.rcc.hse = Some(Hse { + freq: Hertz(24_000_000), + mode: HseMode::Oscillator, + }); + config.rcc.pll1 = Some(Pll { + source: PllSource::HSE, + prediv: PllPreDiv::DIV12, + mul: PllMul::MUL300, + divp: Some(PllDiv::DIV1), //600 MHz + divq: Some(PllDiv::DIV2), // 300 MHz + divr: Some(PllDiv::DIV2), // 300 MHz + }); + config.rcc.sys = Sysclk::PLL1_P; // 600 MHz + config.rcc.ahb_pre = AHBPrescaler::DIV2; // 300 MHz + config.rcc.apb1_pre = APBPrescaler::DIV2; // 150 MHz + config.rcc.apb2_pre = APBPrescaler::DIV2; // 150 MHz + config.rcc.apb4_pre = APBPrescaler::DIV2; // 150 MHz + config.rcc.apb5_pre = APBPrescaler::DIV2; // 150 MHz + config.rcc.voltage_scale = VoltageScale::HIGH; + } + + let p = embassy_stm32::init(config); + + // Create the driver, from the HAL. + let mut ep_out_buffer = [0u8; 256]; + let mut config = embassy_stm32::usb::Config::default(); + + // Do not enable vbus_detection. This is a safe default that works in all boards. + // However, if your USB device is self-powered (can stay powered on if USB is unplugged), you need + // to enable vbus_detection to comply with the USB spec. If you enable it, the board + // has to support it or USB won't work at all. See docs on `vbus_detection` for details. + config.vbus_detection = false; + + let driver = Driver::new_hs(p.USB_OTG_HS, Irqs, p.PM6, p.PM5, &mut ep_out_buffer, config); + + // Create embassy-usb Config + let mut config = embassy_usb::Config::new(0xc0de, 0xcafe); + config.manufacturer = Some("Embassy"); + config.product = Some("USB-serial example"); + config.serial_number = Some("12345678"); + // Required for windows compatibility. + // https://developer.nordicsemi.com/nRF_Connect_SDK/doc/1.9.1/kconfig/CONFIG_CDC_ACM_IAD.html#help + config.device_class = 0xEF; + config.device_sub_class = 0x02; + config.device_protocol = 0x01; + config.composite_with_iads = true; + + // Create embassy-usb DeviceBuilder using the driver and config. + // It needs some buffers for building the descriptors. + let mut config_descriptor = [0; 256]; + let mut bos_descriptor = [0; 256]; + let mut control_buf = [0; 64]; + + let mut state = State::new(); + + let mut builder = Builder::new( + driver, + config, + &mut config_descriptor, + &mut bos_descriptor, + &mut [], // no msos descriptors + &mut control_buf, + ); + + // Create classes on the builder. + let mut class = CdcAcmClass::new(&mut builder, &mut state, 64); + + // Build the builder. + let mut usb = builder.build(); + + // Run the USB device. + let usb_fut = usb.run(); + + // Do stuff with the class! + let echo_fut = async { + loop { + class.wait_connection().await; + info!("Connected"); + let _ = echo(&mut class).await; + info!("Disconnected"); + } + }; + + // Run everything concurrently. + // If we had made everything `'static` above instead, we could do this using separate tasks instead. + join(usb_fut, echo_fut).await; +} + +struct Disconnected {} + +impl From for Disconnected { + fn from(val: EndpointError) -> Self { + match val { + EndpointError::BufferOverflow => panic!("Buffer overflow"), + EndpointError::Disabled => Disconnected {}, + } + } +} + +async fn echo<'d, T: Instance + 'd>(class: &mut CdcAcmClass<'d, Driver<'d, T>>) -> Result<(), Disconnected> { + let mut buf = [0; 64]; + loop { + let n = class.read_packet(&mut buf).await?; + let data = &buf[..n]; + info!("data: {:x}", data); + class.write_packet(data).await?; + } +} -- cgit From 6d9af8304cf88dbfa3713acfef4d89ba3a95c2d8 Mon Sep 17 00:00:00 2001 From: Kevin Date: Sun, 15 Sep 2024 20:09:42 +0200 Subject: Add USBPHYC clock configuration for H7RS series --- examples/stm32h7rs/src/bin/usb_serial.rs | 1 + 1 file changed, 1 insertion(+) (limited to 'examples') diff --git a/examples/stm32h7rs/src/bin/usb_serial.rs b/examples/stm32h7rs/src/bin/usb_serial.rs index 5a234e898..6773f7843 100644 --- a/examples/stm32h7rs/src/bin/usb_serial.rs +++ b/examples/stm32h7rs/src/bin/usb_serial.rs @@ -48,6 +48,7 @@ async fn main(_spawner: Spawner) { config.rcc.apb4_pre = APBPrescaler::DIV2; // 150 MHz config.rcc.apb5_pre = APBPrescaler::DIV2; // 150 MHz config.rcc.voltage_scale = VoltageScale::HIGH; + config.rcc.mux.usbphycsel = mux::Usbphycsel::HSE; } let p = embassy_stm32::init(config); -- cgit