# name: Changelog check
# 
# on:
#   pull_request:
#     # We will not track changes for the following packages/directories.
#     paths-ignore:
#       - "/examples/"
#       - "/docs/"
#       - "/out/"
#       - "/tests/"
#       - "/release/"
#       - "/cyw43-firmware/"
#     # Run on labeled/unlabeled in addition to defaults to detect
#     # adding/removing skip-changelog labels.
#     types: [opened, reopened, labeled, unlabeled, synchronize]
# 
# jobs:
#   changelog:
#     runs-on: ubuntu-latest
# 
#     steps:
#       - name: Checkout sources
#         uses: actions/checkout@v4
# 
#       - name: Check which package is modified
#         uses: dorny/paths-filter@v3
#         id: changes
#         with:
#           filters: |
#             cyw43:
#             - 'cyw43/**'
#             cyw43-pio:
#             - 'cyw43-pio/**'
#             embassy-boot:
#             - 'embassy-boot/**'
#             embassy-boot-nrf:
#             - 'embassy-boot-nrf/**'
#             embassy-boot-rp:
#             - 'embassy-boot-rp/**'
#             embassy-boot-stm32:
#             - 'embassy-boot-stm32/**'
#             embassy-embedded-hal:
#             - 'embassy-embedded-hal/**'
#             embassy-executor:
#             - 'embassy-executor/**'
#             embassy-executor-macros:
#             - 'embassy-executor-macros/**'
#             embassy-executor-timer-queue:
#             - 'embassy-executor-timer-queue/**'
#             embassy-futures:
#             - 'embassy-futures/**'
#             embassy-imxrt:
#             - 'embassy-imxrt/**'
#             embassy-mspm0:
#             - 'embassy-mspm0/**'
#             embassy-net:
#             - 'embassy-net/**'
#             embassy-net-adin1110:
#             - 'embassy-net-adin1110/**'
#             embassy-net-driver:
#             - 'embassy-net-driver/**'
#             embassy-net-driver-channel:
#             - 'embassy-net-driver-channel/**'
#             embassy-net-enc28j60:
#             - 'embassy-net-enc28j60/**'
#             embassy-net-esp-hosted:
#             - 'embassy-net-esp-hosted/**'
#             embassy-net-nrf91:
#             - 'embassy-net-nrf91/**'
#             embassy-net-ppp:
#             - 'embassy-net-ppp/**'
#             embassy-net-tuntap:
#             - 'embassy-net-tuntap/**'
#             embassy-net-wiznet:
#             - 'embassy-net-wiznet/**'
#             embassy-nrf:
#             - 'embassy-nrf/**'
#             embassy-nxp:
#             - 'embassy-nxp/**'
#             embassy-rp:
#             - 'embassy-rp/**'
#             embassy-stm32:
#             - 'embassy-stm32/**'
#             embassy-stm32-wpan:
#             - 'embassy-stm32-wpan/**'
#             embassy-sync:
#             - 'embassy-sync/**'
#             embassy-time:
#             - 'embassy-time/**'
#             embassy-time-driver:
#             - 'embassy-time-driver/**'
#             embassy-time-queue-utils:
#             - 'embassy-time-queue-utils/**'
#             embassy-usb:
#             - 'embassy-usb/**'
#             embassy-usb-dfu:
#             - 'embassy-usb-dfu/**'
#             embassy-usb-driver:
#             - 'embassy-usb-driver/**'
#             embassy-usb-logger:
#             - 'embassy-usb-logger/**'
#             embassy-usb-synopsys-otg:
#             - 'embassy-usb-synopsys-otg/**'
#       - name: Check that changelog updated (cyw43)
#         if: steps.changes.outputs.cyw43 == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: cyw43/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the cyw43/CHANGELOG.md file."
#       - name: Check that changelog updated (cyw43-pio)
#         if: steps.changes.outputs.cyw43-pio == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: cyw43-pio/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the cyw43-pio/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-boot)
#         if: steps.changes.outputs.embassy-boot == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-boot/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-boot/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-boot-nrf)
#         if: steps.changes.outputs.embassy-boot-nrf == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-boot-nrf/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-boot-nrf/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-boot-rp)
#         if: steps.changes.outputs.embassy-boot-rp == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-boot-rp/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-boot-rp/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-boot-stm32)
#         if: steps.changes.outputs.embassy-boot-stm32 == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-boot-stm32/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-boot-stm32/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-embedded-hal)
#         if: steps.changes.outputs.embassy-embedded-hal == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-embedded-hal/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-embedded-hal/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-executor)
#         if: steps.changes.outputs.embassy-executor == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-executor/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-executor/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-executor-macros)
#         if: steps.changes.outputs.embassy-executor-macros == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-executor/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-executor/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-executor-timer-queue)
#         if: steps.changes.outputs.embassy-executor-timer-queue == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-executor-timer-queue/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-executor-timer-queue/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-futures)
#         if: steps.changes.outputs.embassy-futures == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-futures/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-futures/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-imxrt)
#         if: steps.changes.outputs.embassy-imxrt == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-imxrt/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-imxrt/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-mspm0)
#         if: steps.changes.outputs.embassy-mspm0 == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-mspm0/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-mspm0/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-net)
#         if: steps.changes.outputs.embassy-net == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-net/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-net/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-net-adin1110)
#         if: steps.changes.outputs.embassy-net-adin1110 == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-net-adin1110/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-net-adin1110/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-net-driver)
#         if: steps.changes.outputs.embassy-net-driver == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-net-driver/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-net-driver/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-net-driver-channel)
#         if: steps.changes.outputs.embassy-net-driver-channel == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-net-driver-channel/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-net-driver-channel/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-net-enc28j60)
#         if: steps.changes.outputs.embassy-net-enc28j60 == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-net-enc28j60/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-net-enc28j60/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-net-esp-hosted)
#         if: steps.changes.outputs.embassy-net-esp-hosted == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-net-esp-hosted/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-net-esp-hosted/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-net-nrf91)
#         if: steps.changes.outputs.embassy-net-nrf91 == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-net-nrf91/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-net-nrf91/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-net-ppp)
#         if: steps.changes.outputs.embassy-net-ppp == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-net-ppp/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-net-ppp/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-net-tuntap)
#         if: steps.changes.outputs.embassy-net-tuntap == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-net-tuntap/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-net-tuntap/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-net-wiznet)
#         if: steps.changes.outputs.embassy-net-wiznet == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-net-wiznet/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-net-wiznet/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-nrf)
#         if: steps.changes.outputs.embassy-nrf == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-nrf/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-nrf/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-nxp)
#         if: steps.changes.outputs.embassy-nxp == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-nxp/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-nxp/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-rp)
#         if: steps.changes.outputs.embassy-rp == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-rp/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-rp/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-stm32)
#         if: steps.changes.outputs.embassy-stm32 == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-stm32/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-stm32/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-stm32-wpan)
#         if: steps.changes.outputs.embassy-stm32-wpan == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-stm32-wpan/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-stm32-wpan/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-sync)
#         if: steps.changes.outputs.embassy-sync == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-sync/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-sync/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-time)
#         if: steps.changes.outputs.embassy-time == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-time/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-time/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-time-driver)
#         if: steps.changes.outputs.embassy-time-driver == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-time-driver/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-time-driver/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-time-queue-utils)
#         if: steps.changes.outputs.embassy-time-queue-utils == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-time-queue-utils/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-time-queue-utils/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-usb)
#         if: steps.changes.outputs.embassy-usb == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-usb/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-usb/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-usb-dfu)
#         if: steps.changes.outputs.embassy-usb-dfu == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-usb-dfu/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-usb-dfu/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-usb-driver)
#         if: steps.changes.outputs.embassy-usb-driver == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-usb-driver/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-usb-driver/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-usb-logger)
#         if: steps.changes.outputs.embassy-usb-logger == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-usb-logger/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-usb-logger/CHANGELOG.md file."
#       - name: Check that changelog updated (embassy-usb-synopsys-otg)
#         if: steps.changes.outputs.embassy-usb-synopsys-otg == 'true'
#         uses: dangoslen/changelog-enforcer@v3
#         with:
#           changeLogPath: embassy-usb-synopsys-otg/CHANGELOG.md
#           skipLabels: "skip-changelog"
#           missingUpdateErrorMessage: "Please add a changelog entry in the embassy-usb-synopsys-otg/CHANGELOG.md file."