mspm0: add buffered uart driver

And tests for G3507.

6 files changed, 1288 insertions, 41 deletions

diff --git a/embassy-mspm0/Cargo.toml b/embassy-mspm0/Cargo.toml
index d2adc63d7..61afcd76d 100644
--- a/embassy-mspm0/Cargo.toml
+++ b/embassy-mspm0/Cargo.toml
@@ -36,7 +36,10 @@ embassy-embedded-hal = { version = "0.3.1", path = "../embassy-embedded-hal", de
 embassy-executor = { version = "0.7.0", path = "../embassy-executor", optional = true }
 
 embedded-hal = { version = "1.0" }
+embedded-hal-nb = { version = "1.0" }
 embedded-hal-async = { version = "1.0" }
+embedded-io = "0.6.1"
+embedded-io-async = "0.6.1"
 
 defmt = { version = "1.0.1", optional = true }
 fixed = "1.29"
@@ -51,6 +54,7 @@ mspm0-metapac = { git = "https://github.com/mspm0-rs/mspm0-data-generated/", tag
 [build-dependencies]
 proc-macro2 = "1.0.94"
 quote = "1.0.40"
+cfg_aliases = "0.2.1"
 
 # mspm0-metapac = { version = "", default-features = false, features = ["metadata"] }
 mspm0-metapac = { git = "https://github.com/mspm0-rs/mspm0-data-generated/", tag = "mspm0-data-235158ac2865d8aac3a1eceb2d62026eb12bf38f", default-features = false, features = ["metadata"] }
diff --git a/embassy-mspm0/src/uart/buffered.rs b/embassy-mspm0/src/uart/buffered.rs
new file mode 100644
index 000000000..cbc0b6c80
--- /dev/null
+++ b/embassy-mspm0/src/uart/buffered.rs
@@ -0,0 +1,1060 @@
+use core::future::{poll_fn, Future};
+use core::marker::PhantomData;
+use core::slice;
+use core::sync::atomic::{AtomicU8, Ordering};
+use core::task::Poll;
+
+use embassy_embedded_hal::SetConfig;
+use embassy_hal_internal::atomic_ring_buffer::RingBuffer;
+use embassy_hal_internal::interrupt::InterruptExt;
+use embassy_sync::waitqueue::AtomicWaker;
+use embedded_hal_nb::nb;
+
+use crate::gpio::{AnyPin, SealedPin};
+use crate::interrupt::typelevel::Binding;
+use crate::pac::uart::Uart as Regs;
+use crate::uart::{Config, ConfigError, CtsPin, Error, Info, Instance, RtsPin, RxPin, State, TxPin};
+use crate::{interrupt, Peri};
+
+/// Interrupt handler.
+pub struct BufferedInterruptHandler<T: Instance> {
+    _uart: PhantomData<T>,
+}
+
+impl<T: Instance> interrupt::typelevel::Handler<T::Interrupt> for BufferedInterruptHandler<T> {
+    unsafe fn on_interrupt() {
+        on_interrupt(T::info().regs, T::buffered_state())
+    }
+}
+
+/// Bidirectional buffered UART which acts as a combination of [`BufferedUartTx`] and [`BufferedUartRx`].
+pub struct BufferedUart<'d> {
+    rx: BufferedUartRx<'d>,
+    tx: BufferedUartTx<'d>,
+}
+
+impl SetConfig for BufferedUart<'_> {
+    type Config = Config;
+    type ConfigError = ConfigError;
+
+    fn set_config(&mut self, config: &Self::Config) -> Result<(), Self::ConfigError> {
+        self.set_config(config)
+    }
+}
+
+impl<'d> BufferedUart<'d> {
+    /// Create a new bidirectional buffered UART.
+    pub fn new<T: Instance>(
+        uart: Peri<'d, T>,
+        tx: Peri<'d, impl TxPin<T>>,
+        rx: Peri<'d, impl RxPin<T>>,
+        _irq: impl Binding<T::Interrupt, BufferedInterruptHandler<T>>,
+        tx_buffer: &'d mut [u8],
+        rx_buffer: &'d mut [u8],
+        config: Config,
+    ) -> Result<Self, ConfigError> {
+        Self::new_inner(
+            uart,
+            new_pin!(rx, config.rx_pf()),
+            new_pin!(tx, config.tx_pf()),
+            None,
+            None,
+            tx_buffer,
+            rx_buffer,
+            config,
+        )
+    }
+
+    /// Create a new bidirectional buffered UART with request-to-send and clear-to-send pins
+    pub fn new_with_rtscts<T: Instance>(
+        uart: Peri<'d, T>,
+        tx: Peri<'d, impl TxPin<T>>,
+        rx: Peri<'d, impl RxPin<T>>,
+        rts: Peri<'d, impl RtsPin<T>>,
+        cts: Peri<'d, impl CtsPin<T>>,
+        _irq: impl Binding<T::Interrupt, BufferedInterruptHandler<T>>,
+        tx_buffer: &'d mut [u8],
+        rx_buffer: &'d mut [u8],
+        config: Config,
+    ) -> Result<Self, ConfigError> {
+        Self::new_inner(
+            uart,
+            new_pin!(rx, config.rx_pf()),
+            new_pin!(tx, config.tx_pf()),
+            new_pin!(rts, config.rts_pf()),
+            new_pin!(cts, config.cts_pf()),
+            tx_buffer,
+            rx_buffer,
+            config,
+        )
+    }
+
+    /// Reconfigure the driver
+    pub fn set_config(&mut self, config: &Config) -> Result<(), ConfigError> {
+        self.tx.set_config(config)?;
+        self.rx.set_config(config)
+    }
+
+    /// Set baudrate
+    pub fn set_baudrate(&mut self, baudrate: u32) -> Result<(), ConfigError> {
+        self.rx.set_baudrate(baudrate)
+    }
+
+    /// Write to UART TX buffer, blocking execution until done.
+    pub fn blocking_write(&mut self, buffer: &[u8]) -> Result<usize, Error> {
+        self.tx.blocking_write(buffer)
+    }
+
+    /// Flush UART TX buffer, blocking execution until done.
+    pub fn blocking_flush(&mut self) -> Result<(), Error> {
+        self.tx.blocking_flush()
+    }
+
+    /// Check if UART is busy.
+    pub fn busy(&self) -> bool {
+        self.tx.busy()
+    }
+
+    /// Read from UART RX buffer, blocking execution until done.
+    pub fn blocking_read(&mut self, buffer: &mut [u8]) -> Result<usize, Error> {
+        self.rx.blocking_read(buffer)
+    }
+
+    /// Send break character.
+    pub fn send_break(&mut self) {
+        self.tx.send_break()
+    }
+
+    /// Split into separate RX and TX handles.
+    pub fn split(self) -> (BufferedUartTx<'d>, BufferedUartRx<'d>) {
+        (self.tx, self.rx)
+    }
+
+    /// Split into separate RX and TX handles.
+    pub fn split_ref(&mut self) -> (BufferedUartTx<'_>, BufferedUartRx<'_>) {
+        (
+            BufferedUartTx {
+                info: self.tx.info,
+                state: self.tx.state,
+                tx: self.tx.tx.as_mut().map(Peri::reborrow),
+                cts: self.tx.cts.as_mut().map(Peri::reborrow),
+                reborrowed: true,
+            },
+            BufferedUartRx {
+                info: self.rx.info,
+                state: self.rx.state,
+                rx: self.rx.rx.as_mut().map(Peri::reborrow),
+                rts: self.rx.rts.as_mut().map(Peri::reborrow),
+                reborrowed: true,
+            },
+        )
+    }
+}
+
+/// Rx-only buffered UART.
+///
+/// Can be obtained from [`BufferedUart::split`], or can be constructed independently,
+/// if you do not need the transmitting half of the driver.
+pub struct BufferedUartRx<'d> {
+    info: &'static Info,
+    state: &'static BufferedState,
+    rx: Option<Peri<'d, AnyPin>>,
+    rts: Option<Peri<'d, AnyPin>>,
+    reborrowed: bool,
+}
+
+impl SetConfig for BufferedUartRx<'_> {
+    type Config = Config;
+    type ConfigError = ConfigError;
+
+    fn set_config(&mut self, config: &Self::Config) -> Result<(), Self::ConfigError> {
+        self.set_config(config)
+    }
+}
+
+impl<'d> BufferedUartRx<'d> {
+    /// Create a new rx-only buffered UART with no hardware flow control.
+    ///
+    /// Useful if you only want Uart Rx. It saves 1 pin.
+    pub fn new<T: Instance>(
+        uart: Peri<'d, T>,
+        rx: Peri<'d, impl RxPin<T>>,
+        _irq: impl Binding<T::Interrupt, BufferedInterruptHandler<T>>,
+        rx_buffer: &'d mut [u8],
+        config: Config,
+    ) -> Result<Self, ConfigError> {
+        Self::new_inner(uart, new_pin!(rx, config.rx_pf()), None, rx_buffer, config)
+    }
+
+    /// Create a new rx-only buffered UART with a request-to-send pin
+    pub fn new_with_rts<T: Instance>(
+        uart: Peri<'d, T>,
+        rx: Peri<'d, impl RxPin<T>>,
+        rts: Peri<'d, impl RtsPin<T>>,
+        _irq: impl Binding<T::Interrupt, BufferedInterruptHandler<T>>,
+        rx_buffer: &'d mut [u8],
+        config: Config,
+    ) -> Result<Self, ConfigError> {
+        Self::new_inner(
+            uart,
+            new_pin!(rx, config.rx_pf()),
+            new_pin!(rts, config.rts_pf()),
+            rx_buffer,
+            config,
+        )
+    }
+
+    /// Reconfigure the driver
+    pub fn set_config(&mut self, config: &Config) -> Result<(), ConfigError> {
+        if let Some(ref rx) = self.rx {
+            rx.update_pf(config.rx_pf());
+        }
+
+        if let Some(ref rts) = self.rts {
+            rts.update_pf(config.rts_pf());
+        }
+
+        super::reconfigure(&self.info, &self.state.state, config)
+    }
+
+    /// Set baudrate
+    pub fn set_baudrate(&mut self, baudrate: u32) -> Result<(), ConfigError> {
+        super::set_baudrate(&self.info, self.state.state.clock.load(Ordering::Relaxed), baudrate)
+    }
+
+    /// Read from UART RX buffer, blocking execution until done.
+    pub fn blocking_read(&mut self, buffer: &mut [u8]) -> Result<usize, Error> {
+        self.blocking_read_inner(buffer)
+    }
+}
+
+impl Drop for BufferedUartRx<'_> {
+    fn drop(&mut self) {
+        if !self.reborrowed {
+            let state = self.state;
+
+            // SAFETY: RX is being dropped (and is not reborrowed), so the ring buffer must be deinitialized
+            // in order to meet the requirements of init.
+            unsafe {
+                state.rx_buf.deinit();
+            }
+
+            // TX is inactive if the buffer is not available. If this is true, then disable the
+            // interrupt handler since we are running in RX only mode.
+            if state.tx_buf.len() == 0 {
+                self.info.interrupt.disable();
+            }
+
+            self.rx.as_ref().map(|x| x.set_as_disconnected());
+            self.rts.as_ref().map(|x| x.set_as_disconnected());
+        }
+    }
+}
+
+/// Tx-only buffered UART.
+///
+/// Can be obtained from [`BufferedUart::split`], or can be constructed independently,
+/// if you do not need the receiving half of the driver.
+pub struct BufferedUartTx<'d> {
+    info: &'static Info,
+    state: &'static BufferedState,
+    tx: Option<Peri<'d, AnyPin>>,
+    cts: Option<Peri<'d, AnyPin>>,
+    reborrowed: bool,
+}
+
+impl SetConfig for BufferedUartTx<'_> {
+    type Config = Config;
+    type ConfigError = ConfigError;
+
+    fn set_config(&mut self, config: &Self::Config) -> Result<(), Self::ConfigError> {
+        self.set_config(config)
+    }
+}
+
+impl<'d> BufferedUartTx<'d> {
+    /// Create a new tx-only buffered UART with no hardware flow control.
+    ///
+    /// Useful if you only want Uart Tx. It saves 1 pin.
+    pub fn new<T: Instance>(
+        uart: Peri<'d, T>,
+        tx: Peri<'d, impl TxPin<T>>,
+        _irq: impl Binding<T::Interrupt, BufferedInterruptHandler<T>>,
+        tx_buffer: &'d mut [u8],
+        config: Config,
+    ) -> Result<Self, ConfigError> {
+        Self::new_inner(uart, new_pin!(tx, config.tx_pf()), None, tx_buffer, config)
+    }
+
+    /// Create a new tx-only buffered UART with a clear-to-send pin
+    pub fn new_with_rts<T: Instance>(
+        uart: Peri<'d, T>,
+        tx: Peri<'d, impl TxPin<T>>,
+        cts: Peri<'d, impl CtsPin<T>>,
+        _irq: impl Binding<T::Interrupt, BufferedInterruptHandler<T>>,
+        tx_buffer: &'d mut [u8],
+        config: Config,
+    ) -> Result<Self, ConfigError> {
+        Self::new_inner(
+            uart,
+            new_pin!(tx, config.tx_pf()),
+            new_pin!(cts, config.cts_pf()),
+            tx_buffer,
+            config,
+        )
+    }
+
+    /// Reconfigure the driver
+    pub fn set_config(&mut self, config: &Config) -> Result<(), ConfigError> {
+        if let Some(ref tx) = self.tx {
+            tx.update_pf(config.tx_pf());
+        }
+
+        if let Some(ref cts) = self.cts {
+            cts.update_pf(config.cts_pf());
+        }
+
+        super::reconfigure(self.info, &self.state.state, config)
+    }
+
+    /// Set baudrate
+    pub fn set_baudrate(&self, baudrate: u32) -> Result<(), ConfigError> {
+        super::set_baudrate(&self.info, self.state.state.clock.load(Ordering::Relaxed), baudrate)
+    }
+
+    /// Write to UART TX buffer, blocking execution until done.
+    pub fn blocking_write(&mut self, buffer: &[u8]) -> Result<usize, Error> {
+        self.blocking_write_inner(buffer)
+    }
+
+    /// Flush UART TX buffer, blocking execution until done.
+    pub fn blocking_flush(&mut self) -> Result<(), Error> {
+        let state = self.state;
+
+        loop {
+            if state.tx_buf.is_empty() {
+                return Ok(());
+            }
+        }
+    }
+
+    /// Check if UART is busy.
+    pub fn busy(&self) -> bool {
+        super::busy(self.info.regs)
+    }
+
+    /// Send break character
+    pub fn send_break(&mut self) {
+        let r = self.info.regs;
+
+        r.lcrh().modify(|w| {
+            w.set_brk(true);
+        });
+    }
+}
+
+impl Drop for BufferedUartTx<'_> {
+    fn drop(&mut self) {
+        if !self.reborrowed {
+            let state = self.state;
+
+            // SAFETY: TX is being dropped (and is not reborrowed), so the ring buffer must be deinitialized
+            // in order to meet the requirements of init.
+            unsafe {
+                state.tx_buf.deinit();
+            }
+
+            // RX is inactive if the buffer is not available. If this is true, then disable the
+            // interrupt handler since we are running in TX only mode.
+            if state.rx_buf.len() == 0 {
+                self.info.interrupt.disable();
+            }
+
+            self.tx.as_ref().map(|x| x.set_as_disconnected());
+            self.cts.as_ref().map(|x| x.set_as_disconnected());
+        }
+    }
+}
+
+impl embedded_io_async::ErrorType for BufferedUart<'_> {
+    type Error = Error;
+}
+
+impl embedded_io_async::ErrorType for BufferedUartRx<'_> {
+    type Error = Error;
+}
+
+impl embedded_io_async::ErrorType for BufferedUartTx<'_> {
+    type Error = Error;
+}
+
+impl embedded_io_async::Read for BufferedUart<'_> {
+    async fn read(&mut self, buf: &mut [u8]) -> Result<usize, Self::Error> {
+        self.rx.read(buf).await
+    }
+}
+
+impl embedded_io_async::Read for BufferedUartRx<'_> {
+    async fn read(&mut self, buf: &mut [u8]) -> Result<usize, Self::Error> {
+        self.read_inner(buf).await
+    }
+}
+
+impl embedded_io_async::ReadReady for BufferedUart<'_> {
+    fn read_ready(&mut self) -> Result<bool, Self::Error> {
+        self.rx.read_ready()
+    }
+}
+
+impl embedded_io_async::ReadReady for BufferedUartRx<'_> {
+    fn read_ready(&mut self) -> Result<bool, Self::Error> {
+        self.read_ready_inner()
+    }
+}
+
+impl embedded_io_async::BufRead for BufferedUart<'_> {
+    async fn fill_buf(&mut self) -> Result<&[u8], Self::Error> {
+        self.rx.fill_buf().await
+    }
+
+    fn consume(&mut self, amt: usize) {
+        self.rx.consume(amt);
+    }
+}
+
+impl embedded_io_async::BufRead for BufferedUartRx<'_> {
+    async fn fill_buf(&mut self) -> Result<&[u8], Self::Error> {
+        self.fill_buf_inner().await
+    }
+
+    fn consume(&mut self, amt: usize) {
+        self.consume_inner(amt);
+    }
+}
+
+impl embedded_io_async::Write for BufferedUart<'_> {
+    async fn write(&mut self, buf: &[u8]) -> Result<usize, Self::Error> {
+        self.tx.write_inner(buf).await
+    }
+}
+
+impl embedded_io_async::Write for BufferedUartTx<'_> {
+    async fn write(&mut self, buf: &[u8]) -> Result<usize, Self::Error> {
+        self.write_inner(buf).await
+    }
+
+    async fn flush(&mut self) -> Result<(), Self::Error> {
+        self.flush_inner().await
+    }
+}
+
+impl embedded_io::Read for BufferedUart<'_> {
+    fn read(&mut self, buf: &mut [u8]) -> Result<usize, Self::Error> {
+        self.rx.read(buf)
+    }
+}
+
+impl embedded_io::Read for BufferedUartRx<'_> {
+    fn read(&mut self, buf: &mut [u8]) -> Result<usize, Self::Error> {
+        self.blocking_read_inner(buf)
+    }
+}
+
+impl embedded_io::Write for BufferedUart<'_> {
+    fn write(&mut self, buf: &[u8]) -> Result<usize, Self::Error> {
+        self.tx.write(buf)
+    }
+
+    fn flush(&mut self) -> Result<(), Self::Error> {
+        self.tx.flush()
+    }
+}
+
+impl embedded_io::Write for BufferedUartTx<'_> {
+    fn write(&mut self, buf: &[u8]) -> Result<usize, Self::Error> {
+        self.blocking_write_inner(buf)
+    }
+
+    fn flush(&mut self) -> Result<(), Self::Error> {
+        self.blocking_flush()
+    }
+}
+
+impl embedded_hal_nb::serial::Error for Error {
+    fn kind(&self) -> embedded_hal_nb::serial::ErrorKind {
+        match self {
+            Error::Framing => embedded_hal_nb::serial::ErrorKind::FrameFormat,
+            Error::Noise => embedded_hal_nb::serial::ErrorKind::Noise,
+            Error::Overrun => embedded_hal_nb::serial::ErrorKind::Overrun,
+            Error::Parity => embedded_hal_nb::serial::ErrorKind::Parity,
+            Error::Break => embedded_hal_nb::serial::ErrorKind::Other,
+        }
+    }
+}
+
+impl embedded_hal_nb::serial::ErrorType for BufferedUart<'_> {
+    type Error = Error;
+}
+
+impl embedded_hal_nb::serial::ErrorType for BufferedUartRx<'_> {
+    type Error = Error;
+}
+
+impl embedded_hal_nb::serial::ErrorType for BufferedUartTx<'_> {
+    type Error = Error;
+}
+
+impl embedded_hal_nb::serial::Read for BufferedUart<'_> {
+    fn read(&mut self) -> nb::Result<u8, Self::Error> {
+        self.rx.read()
+    }
+}
+
+impl embedded_hal_nb::serial::Read for BufferedUartRx<'_> {
+    fn read(&mut self) -> nb::Result<u8, Self::Error> {
+        if self.info.regs.stat().read().rxfe() {
+            return Err(nb::Error::WouldBlock);
+        }
+
+        super::read_with_error(self.info.regs).map_err(nb::Error::Other)
+    }
+}
+
+impl embedded_hal_nb::serial::Write for BufferedUart<'_> {
+    fn write(&mut self, word: u8) -> nb::Result<(), Self::Error> {
+        self.tx.write(word)
+    }
+
+    fn flush(&mut self) -> nb::Result<(), Self::Error> {
+        self.tx.flush()
+    }
+}
+
+impl embedded_hal_nb::serial::Write for BufferedUartTx<'_> {
+    fn write(&mut self, word: u8) -> nb::Result<(), Self::Error> {
+        self.blocking_write(&[word]).map(drop).map_err(nb::Error::Other)
+    }
+
+    fn flush(&mut self) -> nb::Result<(), Self::Error> {
+        self.blocking_flush().map_err(nb::Error::Other)
+    }
+}
+
+// Impl details
+
+/// Buffered UART state.
+pub(crate) struct BufferedState {
+    /// non-buffered UART state. This is inline in order to avoid [`BufferedUartRx`]/Tx
+    /// needing to carry around a 2nd static reference and waste another 4 bytes.
+    state: State,
+    rx_waker: AtomicWaker,
+    rx_buf: RingBuffer,
+    tx_waker: AtomicWaker,
+    tx_buf: RingBuffer,
+    rx_error: AtomicU8,
+}
+
+// these must match bits 8..12 in RXDATA, but shifted by 8 to the right
+const RXE_NOISE: u8 = 16;
+const RXE_OVERRUN: u8 = 8;
+const RXE_BREAK: u8 = 4;
+const RXE_PARITY: u8 = 2;
+const RXE_FRAMING: u8 = 1;
+
+impl BufferedState {
+    pub const fn new() -> Self {
+        Self {
+            state: State::new(),
+            rx_waker: AtomicWaker::new(),
+            rx_buf: RingBuffer::new(),
+            tx_waker: AtomicWaker::new(),
+            tx_buf: RingBuffer::new(),
+            rx_error: AtomicU8::new(0),
+        }
+    }
+}
+
+impl<'d> BufferedUart<'d> {
+    fn new_inner<T: Instance>(
+        _peri: Peri<'d, T>,
+        rx: Option<Peri<'d, AnyPin>>,
+        tx: Option<Peri<'d, AnyPin>>,
+        rts: Option<Peri<'d, AnyPin>>,
+        cts: Option<Peri<'d, AnyPin>>,
+        tx_buffer: &'d mut [u8],
+        rx_buffer: &'d mut [u8],
+        config: Config,
+    ) -> Result<Self, ConfigError> {
+        let info = T::info();
+        let state = T::buffered_state();
+
+        let mut this = Self {
+            tx: BufferedUartTx {
+                info,
+                state,
+                tx,
+                cts,
+                reborrowed: false,
+            },
+            rx: BufferedUartRx {
+                info,
+                state,
+                rx,
+                rts,
+                reborrowed: false,
+            },
+        };
+        this.enable_and_configure(tx_buffer, rx_buffer, &config)?;
+
+        Ok(this)
+    }
+
+    fn enable_and_configure(
+        &mut self,
+        tx_buffer: &'d mut [u8],
+        rx_buffer: &'d mut [u8],
+        config: &Config,
+    ) -> Result<(), ConfigError> {
+        let info = self.rx.info;
+        let state = self.rx.state;
+
+        assert!(!tx_buffer.is_empty());
+        assert!(!rx_buffer.is_empty());
+
+        init_buffers(info, state, Some(tx_buffer), Some(rx_buffer));
+        super::enable(info.regs);
+        super::configure(
+            info,
+            &state.state,
+            config,
+            true,
+            self.rx.rts.is_some(),
+            true,
+            self.tx.cts.is_some(),
+        )?;
+
+        info.interrupt.unpend();
+        unsafe { info.interrupt.enable() };
+
+        Ok(())
+    }
+}
+
+impl<'d> BufferedUartRx<'d> {
+    fn new_inner<T: Instance>(
+        _peri: Peri<'d, T>,
+        rx: Option<Peri<'d, AnyPin>>,
+        rts: Option<Peri<'d, AnyPin>>,
+        rx_buffer: &'d mut [u8],
+        config: Config,
+    ) -> Result<Self, ConfigError> {
+        let mut this = Self {
+            info: T::info(),
+            state: T::buffered_state(),
+            rx,
+            rts,
+            reborrowed: false,
+        };
+        this.enable_and_configure(rx_buffer, &config)?;
+
+        Ok(this)
+    }
+
+    fn enable_and_configure(&mut self, rx_buffer: &'d mut [u8], config: &Config) -> Result<(), ConfigError> {
+        let info = self.info;
+        let state = self.state;
+
+        init_buffers(info, state, None, Some(rx_buffer));
+        super::enable(info.regs);
+        super::configure(info, &self.state.state, config, true, self.rts.is_some(), false, false)?;
+
+        info.interrupt.unpend();
+        unsafe { info.interrupt.enable() };
+
+        Ok(())
+    }
+
+    async fn read_inner(&self, buf: &mut [u8]) -> Result<usize, Error> {
+        poll_fn(move |cx| {
+            let state = self.state;
+
+            if let Poll::Ready(r) = self.try_read(buf) {
+                return Poll::Ready(r);
+            }
+
+            state.rx_waker.register(cx.waker());
+            Poll::Pending
+        })
+        .await
+    }
+
+    fn blocking_read_inner(&self, buffer: &mut [u8]) -> Result<usize, Error> {
+        loop {
+            match self.try_read(buffer) {
+                Poll::Ready(res) => return res,
+                Poll::Pending => continue,
+            }
+        }
+    }
+
+    fn fill_buf_inner(&self) -> impl Future<Output = Result<&'_ [u8], Error>> {
+        poll_fn(move |cx| {
+            let mut rx_reader = unsafe { self.state.rx_buf.reader() };
+            let (p, n) = rx_reader.pop_buf();
+            let result = if n == 0 {
+                match Self::get_rx_error(self.state) {
+                    None => {
+                        self.state.rx_waker.register(cx.waker());
+                        return Poll::Pending;
+                    }
+                    Some(e) => Err(e),
+                }
+            } else {
+                let buf = unsafe { slice::from_raw_parts(p, n) };
+                Ok(buf)
+            };
+
+            Poll::Ready(result)
+        })
+    }
+
+    fn consume_inner(&self, amt: usize) {
+        let mut rx_reader = unsafe { self.state.rx_buf.reader() };
+        rx_reader.pop_done(amt);
+
+        // (Re-)Enable the interrupt to receive more data in case it was
+        // disabled because the buffer was full or errors were detected.
+        self.info.regs.cpu_int(0).imask().modify(|w| {
+            w.set_rxint(true);
+            w.set_rtout(true);
+        });
+    }
+
+    /// we are ready to read if there is data in the buffer
+    fn read_ready_inner(&self) -> Result<bool, Error> {
+        Ok(!self.state.rx_buf.is_empty())
+    }
+
+    fn try_read(&self, buf: &mut [u8]) -> Poll<Result<usize, Error>> {
+        let state = self.state;
+
+        if buf.is_empty() {
+            return Poll::Ready(Ok(0));
+        }
+
+        let mut rx_reader = unsafe { state.rx_buf.reader() };
+        let n = rx_reader.pop(|data| {
+            let n = data.len().min(buf.len());
+            buf[..n].copy_from_slice(&data[..n]);
+            n
+        });
+
+        let result = if n == 0 {
+            match Self::get_rx_error(state) {
+                None => return Poll::Pending,
+                Some(e) => Err(e),
+            }
+        } else {
+            Ok(n)
+        };
+
+        // (Re-)Enable the interrupt to receive more data in case it was
+        // disabled because the buffer was full or errors were detected.
+        self.info.regs.cpu_int(0).imask().modify(|w| {
+            w.set_rxint(true);
+            w.set_rtout(true);
+        });
+
+        Poll::Ready(result)
+    }
+
+    fn get_rx_error(state: &BufferedState) -> Option<Error> {
+        // Cortex-M0 has does not support atomic swap, so we must do two operations.
+        let errs = critical_section::with(|_cs| {
+            let errs = state.rx_error.load(Ordering::Relaxed);
+            state.rx_error.store(0, Ordering::Relaxed);
+
+            errs
+        });
+
+        if errs & RXE_NOISE != 0 {
+            Some(Error::Noise)
+        } else if errs & RXE_OVERRUN != 0 {
+            Some(Error::Overrun)
+        } else if errs & RXE_BREAK != 0 {
+            Some(Error::Break)
+        } else if errs & RXE_PARITY != 0 {
+            Some(Error::Parity)
+        } else if errs & RXE_FRAMING != 0 {
+            Some(Error::Framing)
+        } else {
+            None
+        }
+    }
+}
+
+impl<'d> BufferedUartTx<'d> {
+    fn new_inner<T: Instance>(
+        _peri: Peri<'d, T>,
+        tx: Option<Peri<'d, AnyPin>>,
+        cts: Option<Peri<'d, AnyPin>>,
+        tx_buffer: &'d mut [u8],
+        config: Config,
+    ) -> Result<Self, ConfigError> {
+        let mut this = Self {
+            info: T::info(),
+            state: T::buffered_state(),
+            tx,
+            cts,
+            reborrowed: false,
+        };
+
+        this.enable_and_configure(tx_buffer, &config)?;
+
+        Ok(this)
+    }
+
+    async fn write_inner(&self, buf: &[u8]) -> Result<usize, Error> {
+        poll_fn(move |cx| {
+            let state = self.state;
+
+            if buf.is_empty() {
+                return Poll::Ready(Ok(0));
+            }
+
+            let mut tx_writer = unsafe { state.tx_buf.writer() };
+            let n = tx_writer.push(|data| {
+                let n = data.len().min(buf.len());
+                data[..n].copy_from_slice(&buf[..n]);
+                n
+            });
+
+            if n == 0 {
+                state.tx_waker.register(cx.waker());
+                return Poll::Pending;
+            }
+
+            // The TX interrupt only triggers when the there was data in the
+            // FIFO and the number of bytes drops below a threshold. When the
+            // FIFO was empty we have to manually pend the interrupt to shovel
+            // TX data from the buffer into the FIFO.
+            self.info.interrupt.pend();
+            Poll::Ready(Ok(n))
+        })
+        .await
+    }
+
+    fn blocking_write_inner(&self, buffer: &[u8]) -> Result<usize, Error> {
+        let state = self.state;
+
+        loop {
+            let empty = state.tx_buf.is_empty();
+
+            // SAFETY: tx buf must be initialized if BufferedUartTx exists.
+            let mut tx_writer = unsafe { state.tx_buf.writer() };
+            let data = tx_writer.push_slice();
+
+            if !data.is_empty() {
+                let n = data.len().min(buffer.len());
+                data[..n].copy_from_slice(&buffer[..n]);
+                tx_writer.push_done(n);
+
+                if empty {
+                    self.info.interrupt.pend();
+                }
+
+                return Ok(n);
+            }
+        }
+    }
+
+    async fn flush_inner(&self) -> Result<(), Error> {
+        poll_fn(move |cx| {
+            let state = self.state;
+
+            if !state.tx_buf.is_empty() {
+                state.tx_waker.register(cx.waker());
+                return Poll::Pending;
+            }
+
+            Poll::Ready(Ok(()))
+        })
+        .await
+    }
+
+    fn enable_and_configure(&mut self, tx_buffer: &'d mut [u8], config: &Config) -> Result<(), ConfigError> {
+        let info = self.info;
+        let state = self.state;
+
+        init_buffers(info, state, Some(tx_buffer), None);
+        super::enable(info.regs);
+        super::configure(info, &state.state, config, false, false, true, self.cts.is_some())?;
+
+        info.interrupt.unpend();
+        unsafe { info.interrupt.enable() };
+
+        Ok(())
+    }
+}
+
+fn init_buffers<'d>(
+    info: &Info,
+    state: &BufferedState,
+    tx_buffer: Option<&'d mut [u8]>,
+    rx_buffer: Option<&'d mut [u8]>,
+) {
+    if let Some(tx_buffer) = tx_buffer {
+        let len = tx_buffer.len();
+        unsafe { state.tx_buf.init(tx_buffer.as_mut_ptr(), len) };
+    }
+
+    if let Some(rx_buffer) = rx_buffer {
+        let len = rx_buffer.len();
+        unsafe { state.rx_buf.init(rx_buffer.as_mut_ptr(), len) };
+    }
+
+    info.regs.cpu_int(0).imask().modify(|w| {
+        w.set_nerr(true);
+        w.set_frmerr(true);
+        w.set_parerr(true);
+        w.set_brkerr(true);
+        w.set_ovrerr(true);
+    });
+}
+
+fn on_interrupt(r: Regs, state: &'static BufferedState) {
+    let int = r.cpu_int(0).mis().read();
+
+    // Per https://github.com/embassy-rs/embassy/pull/1458, both buffered and unbuffered handlers may be bound.
+    if super::dma_enabled(r) {
+        return;
+    }
+
+    // RX
+    if state.rx_buf.is_available() {
+        // SAFETY: RX must have been initialized if RXE is set.
+        let mut rx_writer = unsafe { state.rx_buf.writer() };
+        let rx_buf = rx_writer.push_slice();
+        let mut n_read = 0;
+        let mut error = false;
+
+        for rx_byte in rx_buf {
+            let stat = r.stat().read();
+
+            if stat.rxfe() {
+                break;
+            }
+
+            let data = r.rxdata().read();
+
+            if (data.0 >> 8) != 0 {
+                // Cortex-M0 does not support atomic fetch_or, must do 2 operations.
+                critical_section::with(|_cs| {
+                    let mut value = state.rx_error.load(Ordering::Relaxed);
+                    value |= (data.0 >> 8) as u8;
+                    state.rx_error.store(value, Ordering::Relaxed);
+                });
+                error = true;
+
+                // only fill the buffer with valid characters. the current character is fine
+                // if the error is an overrun, but if we add it to the buffer we'll report
+                // the overrun one character too late. drop it instead and pretend we were
+                // a bit slower at draining the rx fifo than we actually were.
+                // this is consistent with blocking uart error reporting.
+                break;
+            }
+
+            *rx_byte = data.data();
+            n_read += 1;
+        }
+
+        if n_read > 0 {
+            rx_writer.push_done(n_read);
+            state.rx_waker.wake();
+        } else if error {
+            state.rx_waker.wake();
+        }
+
+        // Disable any further RX interrupts when the buffer becomes full or
+        // errors have occurred. This lets us buffer additional errors in the
+        // fifo without needing more error storage locations, and most applications
+        // will want to do a full reset of their uart state anyway once an error
+        // has happened.
+        if state.rx_buf.is_full() || error {
+            r.cpu_int(0).imask().modify(|w| {
+                w.set_rxint(false);
+                w.set_rtout(false);
+            });
+        }
+    }
+
+    if int.eot() {
+        r.cpu_int(0).imask().modify(|w| {
+            w.set_eot(false);
+        });
+
+        r.cpu_int(0).iclr().write(|w| {
+            w.set_eot(true);
+        });
+
+        state.tx_waker.wake();
+    }
+
+    // TX
+    if state.tx_buf.is_available() {
+        // SAFETY: TX must have been initialized if TXE is set.
+        let mut tx_reader = unsafe { state.tx_buf.reader() };
+        let buf = tx_reader.pop_slice();
+        let mut n_written = 0;
+
+        for tx_byte in buf.iter_mut() {
+            let stat = r.stat().read();
+
+            if stat.txff() {
+                break;
+            }
+
+            r.txdata().write(|w| {
+                w.set_data(*tx_byte);
+            });
+            n_written += 1;
+        }
+
+        if n_written > 0 {
+            // EOT will wake.
+            r.cpu_int(0).imask().modify(|w| {
+                w.set_eot(true);
+            });
+
+            tx_reader.pop_done(n_written);
+        }
+    }
+
+    // Clear TX and error interrupt flags
+    // RX interrupt flags are cleared by writing to ICLR.
+    let mis = r.cpu_int(0).mis().read();
+    r.cpu_int(0).iclr().write(|w| {
+        w.set_nerr(mis.nerr());
+        w.set_frmerr(mis.frmerr());
+        w.set_parerr(mis.parerr());
+        w.set_brkerr(mis.brkerr());
+        w.set_ovrerr(mis.ovrerr());
+    });
+
+    // Errors
+    if mis.nerr() {
+        warn!("Noise error");
+    }
+    if mis.frmerr() {
+        warn!("Framing error");
+    }
+    if mis.parerr() {
+        warn!("Parity error");
+    }
+    if mis.brkerr() {
+        warn!("Break error");
+    }
+    if mis.ovrerr() {
+        warn!("Overrun error");
+    }
+}
diff --git a/embassy-mspm0/src/uart.rs b/embassy-mspm0/src/uart/mod.rs
index bc1d2e343..6599cea06 100644
--- a/embassy-mspm0/src/uart.rs
+++ b/embassy-mspm0/src/uart/mod.rs
@@ -1,8 +1,11 @@
 #![macro_use]
 
+mod buffered;
+
 use core::marker::PhantomData;
 use core::sync::atomic::{compiler_fence, AtomicU32, Ordering};
 
+pub use buffered::*;
 use embassy_embedded_hal::SetConfig;
 use embassy_hal_internal::PeripheralType;
 
@@ -128,8 +131,8 @@ pub struct Config {
     // pub manchester: bool,
 
     // TODO: majority voting
-
-    // TODO: fifo level select - need power domain info in metapac
+    /// If true: the built-in FIFO is enabled.
+    pub fifo_enable: bool,
 
     // TODO: glitch suppression
     /// If true: invert TX pin signal values (V<sub>DD</sub> = 0/mark, Gnd = 1/idle).
@@ -169,6 +172,7 @@ impl Default for Config {
             msb_order: BitOrder::LsbFirst,
             loop_back_enable: false,
             // manchester: false,
+            fifo_enable: false,
             invert_tx: false,
             invert_rx: false,
             invert_rts: false,
@@ -185,7 +189,7 @@ impl Default for Config {
 ///
 /// ### Notes on [`embedded_io::Read`]
 ///
-/// `embedded_io::Read` requires guarantees that the base [`UartRx`] cannot provide.
+/// [`embedded_io::Read`] requires guarantees that the base [`UartRx`] cannot provide.
 ///
 /// See [`UartRx`] for more details, and see [`BufferedUart`] and [`RingBufferedUartRx`]
 /// as alternatives that do provide the necessary guarantees for `embedded_io::Read`.
@@ -199,8 +203,7 @@ impl<'d, M: Mode> SetConfig for Uart<'d, M> {
     type ConfigError = ConfigError;
 
     fn set_config(&mut self, config: &Self::Config) -> Result<(), Self::ConfigError> {
-        self.tx.set_config(config)?;
-        self.rx.set_config(config)
+        self.set_config(config)
     }
 }
 
@@ -236,6 +239,12 @@ impl core::fmt::Display for Error {
 
 impl core::error::Error for Error {}
 
+impl embedded_io::Error for Error {
+    fn kind(&self) -> embedded_io::ErrorKind {
+        embedded_io::ErrorKind::Other
+    }
+}
+
 /// Rx-only UART Driver.
 ///
 /// Can be obtained from [`Uart::split`], or can be constructed independently,
@@ -260,7 +269,7 @@ impl<'d, M: Mode> SetConfig for UartRx<'d, M> {
 impl<'d> UartRx<'d, Blocking> {
     /// Create a new rx-only UART with no hardware flow control.
     ///
-    /// Useful if you only want Uart Rx. It saves 1 pin .
+    /// Useful if you only want Uart Rx. It saves 1 pin.
     pub fn new_blocking<T: Instance>(
         peri: Peri<'d, T>,
         rx: Peri<'d, impl RxPin<T>>,
@@ -286,19 +295,6 @@ impl<'d> UartRx<'d, Blocking> {
 }
 
 impl<'d, M: Mode> UartRx<'d, M> {
-    /// Reconfigure the driver
-    pub fn set_config(&mut self, config: &Config) -> Result<(), ConfigError> {
-        if let Some(ref rx) = self.rx {
-            rx.update_pf(config.rx_pf());
-        }
-
-        if let Some(ref rts) = self.rts {
-            rts.update_pf(config.rts_pf());
-        }
-
-        reconfigure(self.info, self.state, config)
-    }
-
     /// Perform a blocking read into `buffer`
     pub fn blocking_read(&mut self, buffer: &mut [u8]) -> Result<(), Error> {
         let r = self.info.regs;
@@ -315,6 +311,19 @@ impl<'d, M: Mode> UartRx<'d, M> {
         Ok(())
     }
 
+    /// Reconfigure the driver
+    pub fn set_config(&mut self, config: &Config) -> Result<(), ConfigError> {
+        if let Some(ref rx) = self.rx {
+            rx.update_pf(config.rx_pf());
+        }
+
+        if let Some(ref rts) = self.rts {
+            rts.update_pf(config.rts_pf());
+        }
+
+        reconfigure(self.info, self.state, config)
+    }
+
     /// Set baudrate
     pub fn set_baudrate(&self, baudrate: u32) -> Result<(), ConfigError> {
         set_baudrate(&self.info, self.state.clock.load(Ordering::Relaxed), baudrate)
@@ -378,19 +387,6 @@ impl<'d> UartTx<'d, Blocking> {
 }
 
 impl<'d, M: Mode> UartTx<'d, M> {
-    /// Reconfigure the driver
-    pub fn set_config(&mut self, config: &Config) -> Result<(), ConfigError> {
-        if let Some(ref tx) = self.tx {
-            tx.update_pf(config.tx_pf());
-        }
-
-        if let Some(ref cts) = self.cts {
-            cts.update_pf(config.cts_pf());
-        }
-
-        reconfigure(self.info, self.state, config)
-    }
-
     /// Perform a blocking UART write
     pub fn blocking_write(&mut self, buffer: &[u8]) -> Result<(), Error> {
         let r = self.info.regs;
@@ -427,6 +423,24 @@ impl<'d, M: Mode> UartTx<'d, M> {
         });
     }
 
+    /// Check if UART is busy.
+    pub fn busy(&self) -> bool {
+        busy(self.info.regs)
+    }
+
+    /// Reconfigure the driver
+    pub fn set_config(&mut self, config: &Config) -> Result<(), ConfigError> {
+        if let Some(ref tx) = self.tx {
+            tx.update_pf(config.tx_pf());
+        }
+
+        if let Some(ref cts) = self.cts {
+            cts.update_pf(config.cts_pf());
+        }
+
+        reconfigure(self.info, self.state, config)
+    }
+
     /// Set baudrate
     pub fn set_baudrate(&self, baudrate: u32) -> Result<(), ConfigError> {
         set_baudrate(&self.info, self.state.clock.load(Ordering::Relaxed), baudrate)
@@ -489,6 +503,11 @@ impl<'d, M: Mode> Uart<'d, M> {
         self.tx.blocking_flush()
     }
 
+    /// Check if UART is busy.
+    pub fn busy(&self) -> bool {
+        self.tx.busy()
+    }
+
     /// Perform a blocking read into `buffer`
     pub fn blocking_read(&mut self, buffer: &mut [u8]) -> Result<(), Error> {
         self.rx.blocking_read(buffer)
@@ -508,6 +527,12 @@ impl<'d, M: Mode> Uart<'d, M> {
         (&mut self.tx, &mut self.rx)
     }
 
+    /// Reconfigure the driver
+    pub fn set_config(&mut self, config: &Config) -> Result<(), ConfigError> {
+        self.tx.set_config(config)?;
+        self.rx.set_config(config)
+    }
+
     /// Send break character
     pub fn send_break(&self) {
         self.tx.send_break();
@@ -557,8 +582,16 @@ pub(crate) struct Info {
 }
 
 pub(crate) struct State {
-    /// The clock rate of the UART. This might be configured.
-    pub(crate) clock: AtomicU32,
+    /// The clock rate of the UART in Hz.
+    clock: AtomicU32,
+}
+
+impl State {
+    pub const fn new() -> Self {
+        Self {
+            clock: AtomicU32::new(0),
+        }
+    }
 }
 
 impl<'d, M: Mode> UartRx<'d, M> {
@@ -746,7 +779,8 @@ fn configure(
 
     info.regs.ctl0().modify(|w| {
         w.set_lbe(config.loop_back_enable);
-        w.set_rxe(enable_rx);
+        // Errata UART_ERR_02, must set RXE to allow use of EOT.
+        w.set_rxe(enable_rx | enable_tx);
         w.set_txe(enable_tx);
         // RXD_OUT_EN and TXD_OUT_EN?
         w.set_menc(false);
@@ -754,13 +788,18 @@ fn configure(
         w.set_rtsen(enable_rts);
         w.set_ctsen(enable_cts);
         // oversampling is set later
-        // TODO: config
-        w.set_fen(false);
+        w.set_fen(config.fifo_enable);
         // TODO: config
         w.set_majvote(false);
         w.set_msbfirst(matches!(config.msb_order, BitOrder::MsbFirst));
     });
 
+    info.regs.ifls().modify(|w| {
+        // TODO: Need power domain info for other options.
+        w.set_txiflsel(vals::Iflssel::AT_LEAST_ONE);
+        w.set_rxiflsel(vals::Iflssel::AT_LEAST_ONE);
+    });
+
     info.regs.lcrh().modify(|w| {
         let eps = if matches!(config.parity, Parity::ParityEven) {
             vals::Eps::EVEN
@@ -1021,9 +1060,29 @@ fn read_with_error(r: Regs) -> Result<u8, Error> {
     Ok(rx.data())
 }
 
+/// This function assumes CTL0.ENABLE is set (for errata cases).
+fn busy(r: Regs) -> bool {
+    // Errata UART_ERR_08
+    if cfg!(any(
+        mspm0g151x, mspm0g351x, mspm0l110x, mspm0l130x, mspm0l134x, mspm0c110x,
+    )) {
+        let stat = r.stat().read();
+        // "Poll TXFIFO status and the CTL0.ENABLE register bit to identify BUSY status."
+        !stat.txfe()
+    } else {
+        r.stat().read().busy()
+    }
+}
+
+// TODO: Implement when dma uart is implemented.
+fn dma_enabled(_r: Regs) -> bool {
+    false
+}
+
 pub(crate) trait SealedInstance {
     fn info() -> &'static Info;
     fn state() -> &'static State;
+    fn buffered_state() -> &'static BufferedState;
 }
 
 macro_rules! impl_uart_instance {
@@ -1041,12 +1100,16 @@ macro_rules! impl_uart_instance {
             }
 
             fn state() -> &'static crate::uart::State {
-                use crate::interrupt::typelevel::Interrupt;
                 use crate::uart::State;
 
-                static STATE: State = State {
-                    clock: core::sync::atomic::AtomicU32::new(0),
-                };
+                static STATE: State = State::new();
+                &STATE
+            }
+
+            fn buffered_state() -> &'static crate::uart::BufferedState {
+                use crate::uart::BufferedState;
+
+                static STATE: BufferedState = BufferedState::new();
                 &STATE
             }
         }
diff --git a/examples/mspm0g3507/Cargo.toml b/examples/mspm0g3507/Cargo.toml
index b6621c9c5..cc40b3109 100644
--- a/examples/mspm0g3507/Cargo.toml
+++ b/examples/mspm0g3507/Cargo.toml
@@ -17,5 +17,7 @@ defmt-rtt = "1.0.0"
 panic-probe = { version = "1.0.0", features = ["print-defmt"] }
 panic-semihosting = "0.6.0"
 
+embedded-io-async = "0.6.1"
+
 [profile.release]
 debug = 2
diff --git a/tests/mspm0/Cargo.toml b/tests/mspm0/Cargo.toml
index 2d5b8cd52..5ba3e586b 100644
--- a/tests/mspm0/Cargo.toml
+++ b/tests/mspm0/Cargo.toml
@@ -13,6 +13,7 @@ teleprobe-meta = "1.1"
 
 embassy-sync = { version = "0.7.0", path = "../../embassy-sync", features = [ "defmt" ] }
 embassy-executor = { version = "0.7.0", path = "../../embassy-executor", features = [ "arch-cortex-m", "executor-thread", "defmt" ] }
+embassy-futures = { version = "0.1.0", path = "../../embassy-futures" }
 embassy-time = { version = "0.4.0", path = "../../embassy-time", features = [ "defmt" ] }
 embassy-mspm0 = { version = "0.1.0", path = "../../embassy-mspm0", features = [ "rt", "defmt", "unstable-pac", "time-driver-any" ]  }
 embassy-embedded-hal = { version = "0.3.1", path = "../../embassy-embedded-hal/"}
@@ -24,6 +25,8 @@ cortex-m = { version = "0.7.6", features = [ "inline-asm", "critical-section-sin
 cortex-m-rt = "0.7.0"
 embedded-hal = { package = "embedded-hal", version = "1.0" }
 embedded-hal-async = { version = "1.0" }
+embedded-io = { version = "0.6.1", features = ["defmt-03"] }
+embedded-io-async = { version = "0.6.1", features = ["defmt-03"] }
 panic-probe = { version = "1.0.0", features = ["print-defmt"] }
 static_cell = "2"
 portable-atomic = { version = "1.5", features = ["critical-section"] }
diff --git a/tests/mspm0/src/bin/uart_buffered.rs b/tests/mspm0/src/bin/uart_buffered.rs
new file mode 100644
index 000000000..135ac1287
--- /dev/null
+++ b/tests/mspm0/src/bin/uart_buffered.rs
@@ -0,0 +1,115 @@
+#![no_std]
+#![no_main]
+
+#[cfg(feature = "mspm0g3507")]
+teleprobe_meta::target!(b"lp-mspm0g3507");
+
+use defmt::{assert_eq, unwrap, *};
+use embassy_executor::Spawner;
+use embassy_mspm0::uart::{BufferedInterruptHandler, BufferedUart, Config};
+use embassy_mspm0::{bind_interrupts, peripherals};
+use {defmt_rtt as _, panic_probe as _};
+
+bind_interrupts!(struct Irqs {
+    UART1 => BufferedInterruptHandler<peripherals::UART1>;
+});
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let p = embassy_mspm0::init(Default::default());
+    info!("Hello World!");
+
+    // TODO: Allow creating a looped-back UART (so pins are not needed).
+    // Do not select default UART since the virtual COM port is attached to UART0.
+    #[cfg(any(feature = "mspm0g3507"))]
+    let (mut tx, mut rx, mut uart) = (p.PA8, p.PA9, p.UART1);
+
+    {
+        use embedded_io_async::{Read, Write};
+
+        let mut config = Config::default();
+        config.loop_back_enable = true;
+        config.fifo_enable = false;
+
+        let tx_buf = &mut [0u8; 16];
+        let rx_buf = &mut [0u8; 16];
+        let mut uart = unwrap!(BufferedUart::new(
+            uart.reborrow(),
+            tx.reborrow(),
+            rx.reborrow(),
+            Irqs,
+            tx_buf,
+            rx_buf,
+            config
+        ));
+
+        let mut buf = [0; 16];
+        for (j, b) in buf.iter_mut().enumerate() {
+            *b = j as u8;
+        }
+
+        unwrap!(uart.write_all(&buf).await);
+        unwrap!(uart.flush().await);
+
+        unwrap!(uart.read_exact(&mut buf).await);
+        for (j, b) in buf.iter().enumerate() {
+            assert_eq!(*b, j as u8);
+        }
+
+        // Buffer is unclogged, should be able to write again.
+        unwrap!(uart.write_all(&buf).await);
+        unwrap!(uart.flush().await);
+
+        unwrap!(uart.read_exact(&mut buf).await);
+        for (j, b) in buf.iter().enumerate() {
+            assert_eq!(*b, j as u8);
+        }
+    }
+
+    info!("Blocking buffered");
+    {
+        use embedded_io::{Read, Write};
+
+        let mut config = Config::default();
+        config.loop_back_enable = true;
+        config.fifo_enable = false;
+
+        let tx_buf = &mut [0u8; 16];
+        let rx_buf = &mut [0u8; 16];
+        let mut uart = unwrap!(BufferedUart::new(
+            uart.reborrow(),
+            tx.reborrow(),
+            rx.reborrow(),
+            Irqs,
+            tx_buf,
+            rx_buf,
+            config
+        ));
+
+        let mut buf = [0; 16];
+
+        for (j, b) in buf.iter_mut().enumerate() {
+            *b = j as u8;
+        }
+
+        unwrap!(uart.write_all(&buf));
+        unwrap!(uart.blocking_flush());
+        unwrap!(uart.read_exact(&mut buf));
+
+        for (j, b) in buf.iter().enumerate() {
+            assert_eq!(*b, j as u8);
+        }
+
+        // Buffer is unclogged, should be able to write again.
+        unwrap!(uart.write_all(&buf));
+        unwrap!(uart.blocking_flush());
+        unwrap!(uart.read_exact(&mut buf));
+
+        for (j, b) in buf.iter().enumerate() {
+            assert_eq!(*b, j as u8, "at {}", j);
+        }
+    }
+
+    info!("Test OK");
+    cortex_m::asm::bkpt();
+}