Merge branch 'embassy-rs:main' into obe1line-stm32c071

1 files changed, 1174 insertions, 0 deletions

diff --git a/embassy-mspm0/src/uart/mod.rs b/embassy-mspm0/src/uart/mod.rs
new file mode 100644
index 000000000..6599cea06
--- /dev/null
+++ b/embassy-mspm0/src/uart/mod.rs
@@ -0,0 +1,1174 @@
+#![macro_use]
+
+mod buffered;
+
+use core::marker::PhantomData;
+use core::sync::atomic::{compiler_fence, AtomicU32, Ordering};
+
+pub use buffered::*;
+use embassy_embedded_hal::SetConfig;
+use embassy_hal_internal::PeripheralType;
+
+use crate::gpio::{AnyPin, PfType, Pull, SealedPin};
+use crate::interrupt::{Interrupt, InterruptExt};
+use crate::mode::{Blocking, Mode};
+use crate::pac::uart::{vals, Uart as Regs};
+use crate::Peri;
+
+/// The clock source for the UART.
+#[derive(Clone, Copy, PartialEq, Eq, Debug)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub enum ClockSel {
+    /// Use the low frequency clock.
+    ///
+    /// The LFCLK runs at 32.768 kHz.
+    LfClk,
+
+    /// Use the middle frequency clock.
+    ///
+    /// The MCLK runs at 4 MHz.
+    MfClk,
+    // BusClk,
+    // BusClk depends on the timer's power domain.
+    // This will be implemented later.
+}
+
+#[non_exhaustive]
+#[derive(Clone, Copy, PartialEq, Eq, Debug)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+/// The order of bits in byte.
+pub enum BitOrder {
+    /// The most significant bit is first.
+    MsbFirst,
+
+    /// The least significant bit is first.
+    LsbFirst,
+}
+
+#[derive(Clone, Copy, PartialEq, Eq, Debug)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+/// Number of data bits
+pub enum DataBits {
+    /// 5 Data Bits
+    DataBits5,
+
+    /// 6 Data Bits
+    DataBits6,
+
+    /// 7 Data Bits
+    DataBits7,
+
+    /// 8 Data Bits
+    DataBits8,
+}
+
+#[derive(Clone, Copy, PartialEq, Eq, Debug)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+/// Parity
+pub enum Parity {
+    /// No parity
+    ParityNone,
+
+    /// Even Parity
+    ParityEven,
+
+    /// Odd Parity
+    ParityOdd,
+}
+
+#[derive(Clone, Copy, PartialEq, Eq, Debug)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+/// Number of stop bits
+pub enum StopBits {
+    /// One stop bit
+    Stop1,
+
+    /// Two stop bits
+    Stop2,
+}
+
+#[non_exhaustive]
+#[derive(Clone, Copy, PartialEq, Eq, Debug)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+/// Config Error
+pub enum ConfigError {
+    /// Rx or Tx not enabled
+    RxOrTxNotEnabled,
+
+    /// The baud rate could not be configured with the given clocks.
+    InvalidBaudRate,
+}
+
+#[non_exhaustive]
+#[derive(Clone, Copy, PartialEq, Eq, Debug)]
+/// Config
+pub struct Config {
+    /// UART clock source.
+    pub clock_source: ClockSel,
+
+    /// Baud rate
+    pub baudrate: u32,
+
+    /// Number of data bits.
+    pub data_bits: DataBits,
+
+    /// Number of stop bits.
+    pub stop_bits: StopBits,
+
+    /// Parity type.
+    pub parity: Parity,
+
+    /// The order of bits in a transmitted/received byte.
+    pub msb_order: BitOrder,
+
+    /// If true: the `TX` is internally connected to `RX`.
+    pub loop_back_enable: bool,
+
+    // TODO: Pending way to check if uart is extended
+    // /// If true: [manchester coding] is used.
+    // ///
+    // /// [manchester coding]: https://en.wikipedia.org/wiki/Manchester_code
+    // pub manchester: bool,
+
+    // TODO: majority voting
+    /// If true: the built-in FIFO is enabled.
+    pub fifo_enable: bool,
+
+    // TODO: glitch suppression
+    /// If true: invert TX pin signal values (V<sub>DD</sub> = 0/mark, Gnd = 1/idle).
+    pub invert_tx: bool,
+
+    /// If true: invert RX pin signal values (V<sub>DD</sub> = 0/mark, Gnd = 1/idle).
+    pub invert_rx: bool,
+
+    /// If true: invert RTS pin signal values (V<sub>DD</sub> = 0/mark, Gnd = 1/idle).
+    pub invert_rts: bool,
+
+    /// If true: invert CTS pin signal values (V<sub>DD</sub> = 0/mark, Gnd = 1/idle).
+    pub invert_cts: bool,
+
+    /// Set the pull configuration for the TX pin.
+    pub tx_pull: Pull,
+
+    /// Set the pull configuration for the RX pin.
+    pub rx_pull: Pull,
+
+    /// Set the pull configuration for the RTS pin.
+    pub rts_pull: Pull,
+
+    /// Set the pull configuration for the CTS pin.
+    pub cts_pull: Pull,
+}
+
+impl Default for Config {
+    fn default() -> Self {
+        Self {
+            clock_source: ClockSel::MfClk,
+            baudrate: 115200,
+            data_bits: DataBits::DataBits8,
+            stop_bits: StopBits::Stop1,
+            parity: Parity::ParityNone,
+            // hardware default
+            msb_order: BitOrder::LsbFirst,
+            loop_back_enable: false,
+            // manchester: false,
+            fifo_enable: false,
+            invert_tx: false,
+            invert_rx: false,
+            invert_rts: false,
+            invert_cts: false,
+            tx_pull: Pull::None,
+            rx_pull: Pull::None,
+            rts_pull: Pull::None,
+            cts_pull: Pull::None,
+        }
+    }
+}
+
+/// Bidirectional UART Driver, which acts as a combination of [`UartTx`] and [`UartRx`].
+///
+/// ### Notes on [`embedded_io::Read`]
+///
+/// [`embedded_io::Read`] requires guarantees that the base [`UartRx`] cannot provide.
+///
+/// See [`UartRx`] for more details, and see [`BufferedUart`] and [`RingBufferedUartRx`]
+/// as alternatives that do provide the necessary guarantees for `embedded_io::Read`.
+pub struct Uart<'d, M: Mode> {
+    tx: UartTx<'d, M>,
+    rx: UartRx<'d, M>,
+}
+
+impl<'d, M: Mode> SetConfig for Uart<'d, M> {
+    type Config = Config;
+    type ConfigError = ConfigError;
+
+    fn set_config(&mut self, config: &Self::Config) -> Result<(), Self::ConfigError> {
+        self.set_config(config)
+    }
+}
+
+/// Serial error
+#[derive(Debug, Eq, PartialEq, Copy, Clone)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+#[non_exhaustive]
+pub enum Error {
+    Framing,
+
+    Noise,
+
+    Overrun,
+
+    Parity,
+
+    Break,
+}
+
+impl core::fmt::Display for Error {
+    fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
+        let message = match self {
+            Self::Framing => "Framing Error",
+            Self::Noise => "Noise Error",
+            Self::Overrun => "RX Buffer Overrun",
+            Self::Parity => "Parity Check Error",
+            Self::Break => "Break Error",
+        };
+
+        write!(f, "{}", message)
+    }
+}
+
+impl core::error::Error for Error {}
+
+impl embedded_io::Error for Error {
+    fn kind(&self) -> embedded_io::ErrorKind {
+        embedded_io::ErrorKind::Other
+    }
+}
+
+/// Rx-only UART Driver.
+///
+/// Can be obtained from [`Uart::split`], or can be constructed independently,
+/// if you do not need the transmitting half of the driver.
+pub struct UartRx<'d, M: Mode> {
+    info: &'static Info,
+    state: &'static State,
+    rx: Option<Peri<'d, AnyPin>>,
+    rts: Option<Peri<'d, AnyPin>>,
+    _phantom: PhantomData<M>,
+}
+
+impl<'d, M: Mode> SetConfig for UartRx<'d, M> {
+    type Config = Config;
+    type ConfigError = ConfigError;
+
+    fn set_config(&mut self, config: &Self::Config) -> Result<(), Self::ConfigError> {
+        self.set_config(config)
+    }
+}
+
+impl<'d> UartRx<'d, Blocking> {
+    /// Create a new rx-only UART with no hardware flow control.
+    ///
+    /// Useful if you only want Uart Rx. It saves 1 pin.
+    pub fn new_blocking<T: Instance>(
+        peri: Peri<'d, T>,
+        rx: Peri<'d, impl RxPin<T>>,
+        config: Config,
+    ) -> Result<Self, ConfigError> {
+        Self::new_inner(peri, new_pin!(rx, config.rx_pf()), None, config)
+    }
+
+    /// Create a new rx-only UART with a request-to-send pin
+    pub fn new_blocking_with_rts<T: Instance>(
+        peri: Peri<'d, T>,
+        rx: Peri<'d, impl RxPin<T>>,
+        rts: Peri<'d, impl RtsPin<T>>,
+        config: Config,
+    ) -> Result<Self, ConfigError> {
+        Self::new_inner(
+            peri,
+            new_pin!(rx, config.rx_pf()),
+            new_pin!(rts, config.rts_pf()),
+            config,
+        )
+    }
+}
+
+impl<'d, M: Mode> UartRx<'d, M> {
+    /// Perform a blocking read into `buffer`
+    pub fn blocking_read(&mut self, buffer: &mut [u8]) -> Result<(), Error> {
+        let r = self.info.regs;
+
+        for b in buffer {
+            // Wait if nothing has arrived yet.
+            while r.stat().read().rxfe() {}
+
+            // Prevent the compiler from reading from buffer too early
+            compiler_fence(Ordering::Acquire);
+            *b = read_with_error(r)?;
+        }
+
+        Ok(())
+    }
+
+    /// Reconfigure the driver
+    pub fn set_config(&mut self, config: &Config) -> Result<(), ConfigError> {
+        if let Some(ref rx) = self.rx {
+            rx.update_pf(config.rx_pf());
+        }
+
+        if let Some(ref rts) = self.rts {
+            rts.update_pf(config.rts_pf());
+        }
+
+        reconfigure(self.info, self.state, config)
+    }
+
+    /// Set baudrate
+    pub fn set_baudrate(&self, baudrate: u32) -> Result<(), ConfigError> {
+        set_baudrate(&self.info, self.state.clock.load(Ordering::Relaxed), baudrate)
+    }
+}
+
+impl<'d, M: Mode> Drop for UartRx<'d, M> {
+    fn drop(&mut self) {
+        self.rx.as_ref().map(|x| x.set_as_disconnected());
+        self.rts.as_ref().map(|x| x.set_as_disconnected());
+    }
+}
+
+/// Tx-only UART Driver.
+///
+/// Can be obtained from [`Uart::split`], or can be constructed independently,
+/// if you do not need the receiving half of the driver.
+pub struct UartTx<'d, M: Mode> {
+    info: &'static Info,
+    state: &'static State,
+    tx: Option<Peri<'d, AnyPin>>,
+    cts: Option<Peri<'d, AnyPin>>,
+    _phantom: PhantomData<M>,
+}
+
+impl<'d, M: Mode> SetConfig for UartTx<'d, M> {
+    type Config = Config;
+    type ConfigError = ConfigError;
+
+    fn set_config(&mut self, config: &Self::Config) -> Result<(), Self::ConfigError> {
+        reconfigure(self.info, self.state, config)
+    }
+}
+
+impl<'d> UartTx<'d, Blocking> {
+    /// Create a new blocking tx-only UART with no hardware flow control.
+    ///
+    /// Useful if you only want Uart Tx. It saves 1 pin.
+    pub fn new_blocking<T: Instance>(
+        peri: Peri<'d, T>,
+        tx: Peri<'d, impl TxPin<T>>,
+        config: Config,
+    ) -> Result<Self, ConfigError> {
+        Self::new_inner(peri, new_pin!(tx, config.tx_pf()), None, config)
+    }
+
+    /// Create a new blocking tx-only UART with a clear-to-send pin
+    pub fn new_blocking_with_cts<T: Instance>(
+        peri: Peri<'d, T>,
+        tx: Peri<'d, impl TxPin<T>>,
+        cts: Peri<'d, impl CtsPin<T>>,
+        config: Config,
+    ) -> Result<Self, ConfigError> {
+        Self::new_inner(
+            peri,
+            new_pin!(tx, config.tx_pf()),
+            new_pin!(cts, config.cts_pf()),
+            config,
+        )
+    }
+}
+
+impl<'d, M: Mode> UartTx<'d, M> {
+    /// Perform a blocking UART write
+    pub fn blocking_write(&mut self, buffer: &[u8]) -> Result<(), Error> {
+        let r = self.info.regs;
+
+        for &b in buffer {
+            // Wait if there is no space
+            while !r.stat().read().txfe() {}
+
+            // Prevent the compiler from writing to buffer too early
+            compiler_fence(Ordering::Release);
+            r.txdata().write(|w| {
+                w.set_data(b);
+            });
+        }
+
+        Ok(())
+    }
+
+    /// Block until transmission complete
+    pub fn blocking_flush(&mut self) -> Result<(), Error> {
+        let r = self.info.regs;
+
+        // Wait until TX fifo/buffer is empty
+        while r.stat().read().txfe() {}
+        Ok(())
+    }
+
+    /// Send break character
+    pub fn send_break(&self) {
+        let r = self.info.regs;
+
+        r.lcrh().modify(|w| {
+            w.set_brk(true);
+        });
+    }
+
+    /// Check if UART is busy.
+    pub fn busy(&self) -> bool {
+        busy(self.info.regs)
+    }
+
+    /// Reconfigure the driver
+    pub fn set_config(&mut self, config: &Config) -> Result<(), ConfigError> {
+        if let Some(ref tx) = self.tx {
+            tx.update_pf(config.tx_pf());
+        }
+
+        if let Some(ref cts) = self.cts {
+            cts.update_pf(config.cts_pf());
+        }
+
+        reconfigure(self.info, self.state, config)
+    }
+
+    /// Set baudrate
+    pub fn set_baudrate(&self, baudrate: u32) -> Result<(), ConfigError> {
+        set_baudrate(&self.info, self.state.clock.load(Ordering::Relaxed), baudrate)
+    }
+}
+
+impl<'d, M: Mode> Drop for UartTx<'d, M> {
+    fn drop(&mut self) {
+        self.tx.as_ref().map(|x| x.set_as_disconnected());
+        self.cts.as_ref().map(|x| x.set_as_disconnected());
+    }
+}
+
+impl<'d> Uart<'d, Blocking> {
+    /// Create a new blocking bidirectional UART.
+    pub fn new_blocking<T: Instance>(
+        peri: Peri<'d, T>,
+        rx: Peri<'d, impl RxPin<T>>,
+        tx: Peri<'d, impl TxPin<T>>,
+        config: Config,
+    ) -> Result<Self, ConfigError> {
+        Self::new_inner(
+            peri,
+            new_pin!(rx, config.rx_pf()),
+            new_pin!(tx, config.tx_pf()),
+            None,
+            None,
+            config,
+        )
+    }
+
+    /// Create a new bidirectional UART with request-to-send and clear-to-send pins
+    pub fn new_blocking_with_rtscts<T: Instance>(
+        peri: Peri<'d, T>,
+        rx: Peri<'d, impl RxPin<T>>,
+        tx: Peri<'d, impl TxPin<T>>,
+        rts: Peri<'d, impl RtsPin<T>>,
+        cts: Peri<'d, impl CtsPin<T>>,
+        config: Config,
+    ) -> Result<Self, ConfigError> {
+        Self::new_inner(
+            peri,
+            new_pin!(rx, config.rx_pf()),
+            new_pin!(tx, config.tx_pf()),
+            new_pin!(rts, config.rts_pf()),
+            new_pin!(cts, config.cts_pf()),
+            config,
+        )
+    }
+}
+
+impl<'d, M: Mode> Uart<'d, M> {
+    /// Perform a blocking write
+    pub fn blocking_write(&mut self, buffer: &[u8]) -> Result<(), Error> {
+        self.tx.blocking_write(buffer)
+    }
+
+    /// Block until transmission complete
+    pub fn blocking_flush(&mut self) -> Result<(), Error> {
+        self.tx.blocking_flush()
+    }
+
+    /// Check if UART is busy.
+    pub fn busy(&self) -> bool {
+        self.tx.busy()
+    }
+
+    /// Perform a blocking read into `buffer`
+    pub fn blocking_read(&mut self, buffer: &mut [u8]) -> Result<(), Error> {
+        self.rx.blocking_read(buffer)
+    }
+
+    /// Split the Uart into a transmitter and receiver, which is
+    /// particularly useful when having two tasks correlating to
+    /// transmitting and receiving.
+    pub fn split(self) -> (UartTx<'d, M>, UartRx<'d, M>) {
+        (self.tx, self.rx)
+    }
+
+    /// Split the Uart into a transmitter and receiver by mutable reference,
+    /// which is particularly useful when having two tasks correlating to
+    /// transmitting and receiving.
+    pub fn split_ref(&mut self) -> (&mut UartTx<'d, M>, &mut UartRx<'d, M>) {
+        (&mut self.tx, &mut self.rx)
+    }
+
+    /// Reconfigure the driver
+    pub fn set_config(&mut self, config: &Config) -> Result<(), ConfigError> {
+        self.tx.set_config(config)?;
+        self.rx.set_config(config)
+    }
+
+    /// Send break character
+    pub fn send_break(&self) {
+        self.tx.send_break();
+    }
+
+    /// Set baudrate
+    pub fn set_baudrate(&self, baudrate: u32) -> Result<(), ConfigError> {
+        set_baudrate(&self.tx.info, self.tx.state.clock.load(Ordering::Relaxed), baudrate)
+    }
+}
+
+/// Peripheral instance trait.
+#[allow(private_bounds)]
+pub trait Instance: SealedInstance + PeripheralType {
+    type Interrupt: crate::interrupt::typelevel::Interrupt;
+}
+
+/// UART `TX` pin trait
+pub trait TxPin<T: Instance>: crate::gpio::Pin {
+    /// Get the PF number needed to use this pin as `TX`.
+    fn pf_num(&self) -> u8;
+}
+
+/// UART `RX` pin trait
+pub trait RxPin<T: Instance>: crate::gpio::Pin {
+    /// Get the PF number needed to use this pin as `RX`.
+    fn pf_num(&self) -> u8;
+}
+
+/// UART `CTS` pin trait
+pub trait CtsPin<T: Instance>: crate::gpio::Pin {
+    /// Get the PF number needed to use this pin as `CTS`.
+    fn pf_num(&self) -> u8;
+}
+
+/// UART `RTS` pin trait
+pub trait RtsPin<T: Instance>: crate::gpio::Pin {
+    /// Get the PF number needed to use this pin as `RTS`.
+    fn pf_num(&self) -> u8;
+}
+
+// ==== IMPL types ====
+
+pub(crate) struct Info {
+    pub(crate) regs: Regs,
+    pub(crate) interrupt: Interrupt,
+}
+
+pub(crate) struct State {
+    /// The clock rate of the UART in Hz.
+    clock: AtomicU32,
+}
+
+impl State {
+    pub const fn new() -> Self {
+        Self {
+            clock: AtomicU32::new(0),
+        }
+    }
+}
+
+impl<'d, M: Mode> UartRx<'d, M> {
+    fn new_inner<T: Instance>(
+        _peri: Peri<'d, T>,
+        rx: Option<Peri<'d, AnyPin>>,
+        rts: Option<Peri<'d, AnyPin>>,
+        config: Config,
+    ) -> Result<Self, ConfigError> {
+        let mut this = Self {
+            info: T::info(),
+            state: T::state(),
+            rx,
+            rts,
+            _phantom: PhantomData,
+        };
+        this.enable_and_configure(&config)?;
+
+        Ok(this)
+    }
+
+    fn enable_and_configure(&mut self, config: &Config) -> Result<(), ConfigError> {
+        let info = self.info;
+
+        enable(info.regs);
+        configure(info, self.state, config, true, self.rts.is_some(), false, false)?;
+
+        Ok(())
+    }
+}
+
+impl<'d, M: Mode> UartTx<'d, M> {
+    fn new_inner<T: Instance>(
+        _peri: Peri<'d, T>,
+        tx: Option<Peri<'d, AnyPin>>,
+        cts: Option<Peri<'d, AnyPin>>,
+        config: Config,
+    ) -> Result<Self, ConfigError> {
+        let mut this = Self {
+            info: T::info(),
+            state: T::state(),
+            tx,
+            cts,
+            _phantom: PhantomData,
+        };
+        this.enable_and_configure(&config)?;
+
+        Ok(this)
+    }
+
+    fn enable_and_configure(&mut self, config: &Config) -> Result<(), ConfigError> {
+        let info = self.info;
+        let state = self.state;
+
+        enable(info.regs);
+        configure(info, state, config, false, false, true, self.cts.is_some())?;
+
+        Ok(())
+    }
+}
+
+impl<'d, M: Mode> Uart<'d, M> {
+    fn new_inner<T: Instance>(
+        _peri: Peri<'d, T>,
+        rx: Option<Peri<'d, AnyPin>>,
+        tx: Option<Peri<'d, AnyPin>>,
+        rts: Option<Peri<'d, AnyPin>>,
+        cts: Option<Peri<'d, AnyPin>>,
+        config: Config,
+    ) -> Result<Self, ConfigError> {
+        let info = T::info();
+        let state = T::state();
+
+        let mut this = Self {
+            tx: UartTx {
+                info,
+                state,
+                tx,
+                cts,
+                _phantom: PhantomData,
+            },
+            rx: UartRx {
+                info,
+                state,
+                rx,
+                rts,
+                _phantom: PhantomData,
+            },
+        };
+        this.enable_and_configure(&config)?;
+
+        Ok(this)
+    }
+
+    fn enable_and_configure(&mut self, config: &Config) -> Result<(), ConfigError> {
+        let info = self.rx.info;
+        let state = self.rx.state;
+
+        enable(info.regs);
+        configure(
+            info,
+            state,
+            config,
+            true,
+            self.rx.rts.is_some(),
+            true,
+            self.tx.cts.is_some(),
+        )?;
+
+        info.interrupt.unpend();
+        unsafe { info.interrupt.enable() };
+
+        Ok(())
+    }
+}
+
+impl Config {
+    fn tx_pf(&self) -> PfType {
+        PfType::output(self.tx_pull, self.invert_tx)
+    }
+
+    fn rx_pf(&self) -> PfType {
+        PfType::input(self.rx_pull, self.invert_rx)
+    }
+
+    fn rts_pf(&self) -> PfType {
+        PfType::output(self.rts_pull, self.invert_rts)
+    }
+
+    fn cts_pf(&self) -> PfType {
+        PfType::input(self.rts_pull, self.invert_rts)
+    }
+}
+
+fn enable(regs: Regs) {
+    let gprcm = regs.gprcm(0);
+
+    gprcm.rstctl().write(|w| {
+        w.set_resetstkyclr(true);
+        w.set_resetassert(true);
+        w.set_key(vals::ResetKey::KEY);
+    });
+
+    gprcm.pwren().write(|w| {
+        w.set_enable(true);
+        w.set_key(vals::PwrenKey::KEY);
+    });
+}
+
+fn configure(
+    info: &Info,
+    state: &State,
+    config: &Config,
+    enable_rx: bool,
+    enable_rts: bool,
+    enable_tx: bool,
+    enable_cts: bool,
+) -> Result<(), ConfigError> {
+    let r = info.regs;
+
+    if !enable_rx && !enable_tx {
+        return Err(ConfigError::RxOrTxNotEnabled);
+    }
+
+    // SLAU846B says that clocks should be enabled before disabling the uart.
+    r.clksel().write(|w| match config.clock_source {
+        ClockSel::LfClk => {
+            w.set_lfclk_sel(true);
+            w.set_mfclk_sel(false);
+            w.set_busclk_sel(false);
+        }
+        ClockSel::MfClk => {
+            w.set_mfclk_sel(true);
+            w.set_lfclk_sel(false);
+            w.set_busclk_sel(false);
+        }
+    });
+
+    let clock = match config.clock_source {
+        ClockSel::LfClk => 32768,
+        ClockSel::MfClk => 4_000_000,
+    };
+
+    state.clock.store(clock, Ordering::Relaxed);
+
+    info.regs.ctl0().modify(|w| {
+        w.set_lbe(config.loop_back_enable);
+        // Errata UART_ERR_02, must set RXE to allow use of EOT.
+        w.set_rxe(enable_rx | enable_tx);
+        w.set_txe(enable_tx);
+        // RXD_OUT_EN and TXD_OUT_EN?
+        w.set_menc(false);
+        w.set_mode(vals::Mode::UART);
+        w.set_rtsen(enable_rts);
+        w.set_ctsen(enable_cts);
+        // oversampling is set later
+        w.set_fen(config.fifo_enable);
+        // TODO: config
+        w.set_majvote(false);
+        w.set_msbfirst(matches!(config.msb_order, BitOrder::MsbFirst));
+    });
+
+    info.regs.ifls().modify(|w| {
+        // TODO: Need power domain info for other options.
+        w.set_txiflsel(vals::Iflssel::AT_LEAST_ONE);
+        w.set_rxiflsel(vals::Iflssel::AT_LEAST_ONE);
+    });
+
+    info.regs.lcrh().modify(|w| {
+        let eps = if matches!(config.parity, Parity::ParityEven) {
+            vals::Eps::EVEN
+        } else {
+            vals::Eps::ODD
+        };
+
+        let wlen = match config.data_bits {
+            DataBits::DataBits5 => vals::Wlen::DATABIT5,
+            DataBits::DataBits6 => vals::Wlen::DATABIT6,
+            DataBits::DataBits7 => vals::Wlen::DATABIT7,
+            DataBits::DataBits8 => vals::Wlen::DATABIT8,
+        };
+
+        // Used in LIN mode only
+        w.set_brk(false);
+        w.set_pen(config.parity != Parity::ParityNone);
+        w.set_eps(eps);
+        w.set_stp2(matches!(config.stop_bits, StopBits::Stop2));
+        w.set_wlen(wlen);
+        // appears to only be used in RS-485 mode.
+        w.set_sps(false);
+        // IDLE pattern?
+        w.set_sendidle(false);
+        // ignore extdir_setup and extdir_hold, only used in RS-485 mode.
+    });
+
+    set_baudrate_inner(info.regs, clock, config.baudrate)?;
+
+    r.ctl0().modify(|w| {
+        w.set_enable(true);
+    });
+
+    Ok(())
+}
+
+fn reconfigure(info: &Info, state: &State, config: &Config) -> Result<(), ConfigError> {
+    info.interrupt.disable();
+    let r = info.regs;
+    let ctl0 = r.ctl0().read();
+    configure(info, state, config, ctl0.rxe(), ctl0.rtsen(), ctl0.txe(), ctl0.ctsen())?;
+
+    info.interrupt.unpend();
+    unsafe { info.interrupt.enable() };
+
+    Ok(())
+}
+
+/// Set the baud rate and clock settings.
+///
+/// This should be done relatively late during configuration since some clock settings are invalid depending on mode.
+fn set_baudrate(info: &Info, clock: u32, baudrate: u32) -> Result<(), ConfigError> {
+    let r = info.regs;
+
+    info.interrupt.disable();
+
+    // Programming baud rate requires that the peripheral is disabled
+    critical_section::with(|_cs| {
+        r.ctl0().modify(|w| {
+            w.set_enable(false);
+        });
+    });
+
+    // Wait for end of transmission per suggestion in SLAU 845 section 18.3.28
+    while !r.stat().read().txfe() {}
+
+    set_baudrate_inner(r, clock, baudrate)?;
+
+    critical_section::with(|_cs| {
+        r.ctl0().modify(|w| {
+            w.set_enable(true);
+        });
+    });
+
+    info.interrupt.unpend();
+    unsafe { info.interrupt.enable() };
+
+    Ok(())
+}
+
+fn set_baudrate_inner(regs: Regs, clock: u32, baudrate: u32) -> Result<(), ConfigError> {
+    // Quoting SLAU846 section 18.2.3.4:
+    // "When IBRD = 0, FBRD is ignored and no data gets transferred by the UART."
+    const MIN_IBRD: u16 = 1;
+
+    // FBRD can be 0
+    // FBRD is at most a 6-bit number.
+    const MAX_FBRD: u8 = 2_u8.pow(6);
+
+    const DIVS: [(u8, vals::Clkdiv); 8] = [
+        (1, vals::Clkdiv::DIV_BY_1),
+        (2, vals::Clkdiv::DIV_BY_2),
+        (3, vals::Clkdiv::DIV_BY_3),
+        (4, vals::Clkdiv::DIV_BY_4),
+        (5, vals::Clkdiv::DIV_BY_5),
+        (6, vals::Clkdiv::DIV_BY_6),
+        (7, vals::Clkdiv::DIV_BY_7),
+        (8, vals::Clkdiv::DIV_BY_8),
+    ];
+
+    // Quoting from SLAU 846 section 18.2.3.4:
+    // "Select oversampling by 3 or 8 to achieve higher speed with UARTclk/8 or UARTclk/3. In this case
+    //  the receiver tolerance to clock deviation is reduced."
+    //
+    // "Select oversampling by 16 to increase the tolerance of the receiver to clock deviations. The
+    //  maximum speed is limited to UARTclk/16."
+    //
+    // Based on these requirements, prioritize higher oversampling first to increase tolerance to clock
+    // deviation. If no valid BRD value can be found satisifying the highest sample rate, then reduce
+    // sample rate until valid parameters are found.
+    const OVS: [(u8, vals::Hse); 3] = [(16, vals::Hse::OVS16), (8, vals::Hse::OVS8), (3, vals::Hse::OVS3)];
+
+    // 3x oversampling is not supported with manchester coding, DALI or IrDA.
+    let x3_invalid = {
+        let ctl0 = regs.ctl0().read();
+        let irctl = regs.irctl().read();
+
+        ctl0.menc() || matches!(ctl0.mode(), vals::Mode::DALI) || irctl.iren()
+    };
+    let mut found = None;
+
+    'outer: for &(oversampling, hse_value) in &OVS {
+        if matches!(hse_value, vals::Hse::OVS3) && x3_invalid {
+            continue;
+        }
+
+        // Verify that the selected oversampling does not require a clock faster than what the hardware
+        // is provided.
+        let Some(min_clock) = baudrate.checked_mul(oversampling as u32) else {
+            trace!(
+                "{}x oversampling would cause overflow for clock: {} Hz",
+                oversampling,
+                clock
+            );
+            continue;
+        };
+
+        if min_clock > clock {
+            trace!("{} oversampling is too high for clock: {} Hz", oversampling, clock);
+            continue;
+        }
+
+        for &(div, div_value) in &DIVS {
+            trace!(
+                "Trying div: {}, oversampling {} for {} baud",
+                div,
+                oversampling,
+                baudrate
+            );
+
+            let Some((ibrd, fbrd)) = calculate_brd(clock, div, baudrate, oversampling) else {
+                trace!("Calculating BRD overflowed: trying another divider");
+                continue;
+            };
+
+            if ibrd < MIN_IBRD || fbrd > MAX_FBRD {
+                trace!("BRD was invalid: trying another divider");
+                continue;
+            }
+
+            found = Some((hse_value, div_value, ibrd, fbrd));
+            break 'outer;
+        }
+    }
+
+    let Some((hse, div, ibrd, fbrd)) = found else {
+        return Err(ConfigError::InvalidBaudRate);
+    };
+
+    regs.clkdiv().write(|w| {
+        w.set_ratio(div);
+    });
+
+    regs.ibrd().write(|w| {
+        w.set_divint(ibrd);
+    });
+
+    regs.fbrd().write(|w| {
+        w.set_divfrac(fbrd);
+    });
+
+    regs.ctl0().modify(|w| {
+        w.set_hse(hse);
+    });
+
+    Ok(())
+}
+
+/// Calculate the integer and fractional parts of the `BRD` value.
+///
+/// Returns [`None`] if calculating this results in overflows.
+///
+/// Values returned are `(ibrd, fbrd)`
+fn calculate_brd(clock: u32, div: u8, baud: u32, oversampling: u8) -> Option<(u16, u8)> {
+    use fixed::types::U26F6;
+
+    // Calculate BRD according to SLAU 846 section 18.2.3.4.
+    //
+    // BRD is a 22-bit value with 16 integer bits and 6 fractional bits.
+    //
+    // uart_clock = clock / div
+    // brd = ibrd.fbrd = uart_clock / (oversampling * baud)"
+    //
+    // It is tempting to rearrange the equation such that there is only a single division in
+    // order to reduce error. However this is wrong since the denominator ends up being too
+    // small to represent in 6 fraction bits. This means that FBRD would always be 0.
+    //
+    // Calculations are done in a U16F6 format. However the fixed crate has no such representation.
+    // U26F6 is used since it has the same number of fractional bits and we verify at the end that
+    // the integer part did not overflow.
+    let clock = U26F6::from_num(clock);
+    let div = U26F6::from_num(div);
+    let oversampling = U26F6::from_num(oversampling);
+    let baud = U26F6::from_num(baud);
+
+    let uart_clock = clock.checked_div(div)?;
+
+    // oversampling * baud
+    let denom = oversampling.checked_mul(baud)?;
+    // uart_clock / (oversampling * baud)
+    let brd = uart_clock.checked_div(denom)?;
+
+    // Checked is used to determine overflow in the 10 most singificant bits since the
+    // actual representation of BRD is U16F6.
+    let ibrd = brd.checked_to_num::<u16>()?;
+
+    // We need to scale FBRD's representation to an integer.
+    let fbrd_scale = U26F6::from_num(2_u32.checked_pow(U26F6::FRAC_NBITS)?);
+
+    // It is suggested that 0.5 is added to ensure that any fractional parts round up to the next
+    // integer. If it doesn't round up then it'll get discarded which is okay.
+    let half = U26F6::from_num(1) / U26F6::from_num(2);
+    // fbrd = INT(((FRAC(BRD) * 64) + 0.5))
+    let fbrd = brd
+        .frac()
+        .checked_mul(fbrd_scale)?
+        .checked_add(half)?
+        .checked_to_num::<u8>()?;
+
+    Some((ibrd, fbrd))
+}
+
+fn read_with_error(r: Regs) -> Result<u8, Error> {
+    let rx = r.rxdata().read();
+
+    if rx.frmerr() {
+        return Err(Error::Framing);
+    } else if rx.parerr() {
+        return Err(Error::Parity);
+    } else if rx.brkerr() {
+        return Err(Error::Break);
+    } else if rx.ovrerr() {
+        return Err(Error::Overrun);
+    } else if rx.nerr() {
+        return Err(Error::Noise);
+    }
+
+    Ok(rx.data())
+}
+
+/// This function assumes CTL0.ENABLE is set (for errata cases).
+fn busy(r: Regs) -> bool {
+    // Errata UART_ERR_08
+    if cfg!(any(
+        mspm0g151x, mspm0g351x, mspm0l110x, mspm0l130x, mspm0l134x, mspm0c110x,
+    )) {
+        let stat = r.stat().read();
+        // "Poll TXFIFO status and the CTL0.ENABLE register bit to identify BUSY status."
+        !stat.txfe()
+    } else {
+        r.stat().read().busy()
+    }
+}
+
+// TODO: Implement when dma uart is implemented.
+fn dma_enabled(_r: Regs) -> bool {
+    false
+}
+
+pub(crate) trait SealedInstance {
+    fn info() -> &'static Info;
+    fn state() -> &'static State;
+    fn buffered_state() -> &'static BufferedState;
+}
+
+macro_rules! impl_uart_instance {
+    ($instance: ident) => {
+        impl crate::uart::SealedInstance for crate::peripherals::$instance {
+            fn info() -> &'static crate::uart::Info {
+                use crate::interrupt::typelevel::Interrupt;
+                use crate::uart::Info;
+
+                const INFO: Info = Info {
+                    regs: crate::pac::$instance,
+                    interrupt: crate::interrupt::typelevel::$instance::IRQ,
+                };
+                &INFO
+            }
+
+            fn state() -> &'static crate::uart::State {
+                use crate::uart::State;
+
+                static STATE: State = State::new();
+                &STATE
+            }
+
+            fn buffered_state() -> &'static crate::uart::BufferedState {
+                use crate::uart::BufferedState;
+
+                static STATE: BufferedState = BufferedState::new();
+                &STATE
+            }
+        }
+
+        impl crate::uart::Instance for crate::peripherals::$instance {
+            type Interrupt = crate::interrupt::typelevel::$instance;
+        }
+    };
+}
+
+macro_rules! impl_uart_tx_pin {
+    ($instance: ident, $pin: ident, $pf: expr) => {
+        impl crate::uart::TxPin<crate::peripherals::$instance> for crate::peripherals::$pin {
+            fn pf_num(&self) -> u8 {
+                $pf
+            }
+        }
+    };
+}
+
+macro_rules! impl_uart_rx_pin {
+    ($instance: ident, $pin: ident, $pf: expr) => {
+        impl crate::uart::RxPin<crate::peripherals::$instance> for crate::peripherals::$pin {
+            fn pf_num(&self) -> u8 {
+                $pf
+            }
+        }
+    };
+}
+
+macro_rules! impl_uart_cts_pin {
+    ($instance: ident, $pin: ident, $pf: expr) => {
+        impl crate::uart::CtsPin<crate::peripherals::$instance> for crate::peripherals::$pin {
+            fn pf_num(&self) -> u8 {
+                $pf
+            }
+        }
+    };
+}
+
+macro_rules! impl_uart_rts_pin {
+    ($instance: ident, $pin: ident, $pf: expr) => {
+        impl crate::uart::RtsPin<crate::peripherals::$instance> for crate::peripherals::$pin {
+            fn pf_num(&self) -> u8 {
+                $pf
+            }
+        }
+    };
+}
+
+#[cfg(test)]
+mod tests {
+    use super::calculate_brd;
+
+    /// This is a smoke test based on the example in SLAU 846 section 18.2.3.4.
+    #[test]
+    fn datasheet() {
+        let brd = calculate_brd(40_000_000, 1, 19200, 16);
+
+        assert!(matches!(brd, Some((130, 13))));
+    }
+}