Adding _nrf91 feature

Combining _nrf9160 and _nrf9120 in many places to reduce cfgs

6 files changed, 58 insertions, 36 deletions

diff --git a/embassy-nrf/src/gpiote.rs b/embassy-nrf/src/gpiote.rs
index 8d15e04d0..9d97c7be9 100644
--- a/embassy-nrf/src/gpiote.rs
+++ b/embassy-nrf/src/gpiote.rs
@@ -166,7 +166,6 @@ unsafe fn handle_gpiote_interrupt() {
     }
 }
 
-
 #[cfg(not(feature = "_nrf51"))]
 struct BitIter(u32);
 
diff --git a/embassy-nrf/src/lib.rs b/embassy-nrf/src/lib.rs
index 15d2e65b2..75cdb34b6 100644
--- a/embassy-nrf/src/lib.rs
+++ b/embassy-nrf/src/lib.rs
@@ -26,8 +26,32 @@
     feature = "nrf9160-ns",
     feature = "nrf9120-s",
     feature = "nrf9120-ns",
+    feature = "nrf9151-s",
+    feature = "nrf9151-ns",
+    feature = "nrf9161-s",
+    feature = "nrf9161-ns",
 )))]
-compile_error!("No chip feature activated. You must activate exactly one of the following features: nrf52810, nrf52811, nrf52832, nrf52833, nrf52840");
+compile_error!("No chip feature activated. You must activate exactly one of the following features:
+    nrf51,
+    nrf52805,
+    nrf52810,
+    nrf52811,
+    nrf52820,
+    nrf52832,
+    nrf52833,
+    nrf52840,
+    nrf5340-app-s,
+    nrf5340-app-ns,
+    nrf5340-net,
+    nrf9160-s,
+    nrf9160-ns,
+    nrf9120-s,
+    nrf9120-ns,
+    nrf9151-s,
+    nrf9151-ns,
+    nrf9161-s,
+    nrf9161-ns,
+    ");
 
 #[cfg(all(feature = "reset-pin-as-gpio", not(feature = "_nrf52")))]
 compile_error!("feature `reset-pin-as-gpio` is only valid for nRF52 series chips.");
@@ -49,7 +73,7 @@ pub mod gpio;
 pub mod gpiote;
 
 // TODO: tested on other chips
-#[cfg(not(any(feature = "_nrf9160", feature = "_nrf9120", feature = "_nrf5340-app")))]
+#[cfg(not(any(feature = "_nrf91", feature = "_nrf5340-app")))]
 pub mod radio;
 
 #[cfg(not(feature = "nrf51"))]
@@ -64,8 +88,7 @@ pub mod nvmc;
     feature = "nrf52833",
     feature = "nrf52840",
     feature = "_nrf5340-app",
-    feature = "_nrf9160",
-    feature = "_nrf9120"
+    feature = "_nrf91",
 ))]
 pub mod pdm;
 pub mod ppi;
@@ -76,11 +99,11 @@ pub mod ppi;
     feature = "_nrf5340-net"
 )))]
 pub mod pwm;
-#[cfg(not(any(feature = "nrf51", feature = "_nrf9160", feature = "_nrf9120", feature = "_nrf5340-net")))]
+#[cfg(not(any(feature = "nrf51", feature = "_nrf91", feature = "_nrf5340-net")))]
 pub mod qdec;
 #[cfg(any(feature = "nrf52840", feature = "_nrf5340-app"))]
 pub mod qspi;
-#[cfg(not(any(feature = "_nrf5340-app", feature = "_nrf9160", feature = "_nrf9120")))]
+#[cfg(not(any(feature = "_nrf5340-app", feature = "_nrf91")))]
 pub mod rng;
 #[cfg(not(any(feature = "nrf51", feature = "nrf52820", feature = "_nrf5340-net")))]
 pub mod saadc;
@@ -88,7 +111,7 @@ pub mod saadc;
 pub mod spim;
 #[cfg(not(feature = "nrf51"))]
 pub mod spis;
-#[cfg(not(any(feature = "_nrf5340", feature = "_nrf9160", feature = "_nrf9120")))]
+#[cfg(not(any(feature = "_nrf5340", feature = "_nrf91")))]
 pub mod temp;
 pub mod timer;
 #[cfg(not(feature = "nrf51"))]
@@ -200,15 +223,15 @@ pub mod config {
         /// Internal RC oscillator
         InternalRC,
         /// Synthesized from the high frequency clock source.
-        #[cfg(not(any(feature = "_nrf5340", feature = "_nrf9160", feature = "_nrf9120")))]
+        #[cfg(not(any(feature = "_nrf5340", feature = "_nrf91")))]
         Synthesized,
         /// External source from xtal.
         ExternalXtal,
         /// External source from xtal with low swing applied.
-        #[cfg(not(any(feature = "_nrf5340", feature = "_nrf9160", feature = "_nrf9120")))]
+        #[cfg(not(any(feature = "_nrf5340", feature = "_nrf91")))]
         ExternalLowSwing,
         /// External source from xtal with full swing applied.
-        #[cfg(not(any(feature = "_nrf5340", feature = "_nrf9160", feature = "_nrf9120")))]
+        #[cfg(not(any(feature = "_nrf5340", feature = "_nrf91")))]
         ExternalFullSwing,
     }
 
@@ -226,7 +249,7 @@ pub mod config {
     }
 
     /// Settings for enabling the built in DCDC converters.
-    #[cfg(not(any(feature = "_nrf5340", feature = "_nrf9160", feature = "_nrf9120")))]
+    #[cfg(not(any(feature = "_nrf5340", feature = "_nrf91")))]
     pub struct DcdcConfig {
         /// Config for the first stage DCDC (VDDH -> VDD), if disabled LDO will be used.
         #[cfg(feature = "nrf52840")]
@@ -268,7 +291,7 @@ pub mod config {
     }
 
     /// Settings for enabling the built in DCDC converter.
-    #[cfg(any(feature = "_nrf9160", feature = "_nrf9120"))]
+    #[cfg(feature = "_nrf91")]
     pub struct DcdcConfig {
         /// Config for the main rail, if disabled LDO will be used.
         pub regmain: bool,
@@ -302,7 +325,7 @@ pub mod config {
                 // xtals if they know they have them.
                 hfclk_source: HfclkSource::Internal,
                 lfclk_source: LfclkSource::InternalRC,
-                #[cfg(not(any(feature = "_nrf5340", feature = "_nrf9160", feature = "_nrf9120")))]
+                #[cfg(not(any(feature = "_nrf5340", feature = "_nrf91")))]
                 dcdc: DcdcConfig {
                     #[cfg(feature = "nrf52840")]
                     reg0: false,
@@ -316,7 +339,7 @@ pub mod config {
                     regmain: false,
                     regradio: false,
                 },
-                #[cfg(any(feature = "_nrf9160", feature = "_nrf9120"))]
+                #[cfg(feature = "_nrf91")]
                 dcdc: DcdcConfig { regmain: false },
                 #[cfg(feature = "gpiote")]
                 gpiote_interrupt_priority: crate::interrupt::Priority::P0,
@@ -333,7 +356,7 @@ pub mod config {
     }
 }
 
-#[cfg(any(feature = "_nrf9160", feature = "_nrf9120"))]
+#[cfg(feature = "_nrf91")]
 #[allow(unused)]
 mod consts {
     pub const UICR_APPROTECT: *mut u32 = 0x00FF8000 as *mut u32;
@@ -472,7 +495,7 @@ pub fn init(config: config::Config) -> Peripherals {
             // UICR.APPROTECT = Enabled
             let res = uicr_write(consts::UICR_APPROTECT, consts::APPROTECT_ENABLED);
             needs_reset |= res == WriteResult::Written;
-            #[cfg(any(feature = "_nrf5340-app", feature = "_nrf9160", feature = "_nrf9120"))]
+            #[cfg(any(feature = "_nrf5340-app", feature = "_nrf91"))]
             {
                 let res = uicr_write(consts::UICR_SECUREAPPROTECT, consts::APPROTECT_ENABLED);
                 needs_reset |= res == WriteResult::Written;
@@ -556,7 +579,7 @@ pub fn init(config: config::Config) -> Peripherals {
     }
 
     // Configure LFCLK.
-    #[cfg(not(any(feature = "nrf51", feature = "_nrf5340", feature = "_nrf9160", feature = "_nrf9120")))]
+    #[cfg(not(any(feature = "nrf51", feature = "_nrf5340", feature = "_nrf91")))]
     match config.lfclk_source {
         config::LfclkSource::InternalRC => r.lfclksrc.write(|w| w.src().rc()),
         config::LfclkSource::Synthesized => r.lfclksrc.write(|w| w.src().synth()),
@@ -576,7 +599,7 @@ pub fn init(config: config::Config) -> Peripherals {
             w
         }),
     }
-    #[cfg(any(feature = "_nrf9160", feature = "_nrf9120"))]
+    #[cfg(feature = "_nrf91")]
     match config.lfclk_source {
         config::LfclkSource::InternalRC => r.lfclksrc.write(|w| w.src().lfrc()),
         config::LfclkSource::ExternalXtal => r.lfclksrc.write(|w| w.src().lfxo()),
@@ -589,7 +612,7 @@ pub fn init(config: config::Config) -> Peripherals {
     r.tasks_lfclkstart.write(|w| unsafe { w.bits(1) });
     while r.events_lfclkstarted.read().bits() == 0 {}
 
-    #[cfg(not(any(feature = "_nrf5340", feature = "_nrf9160", feature = "_nrf9120")))]
+    #[cfg(not(any(feature = "_nrf5340", feature = "_nrf91")))]
     {
         // Setup DCDCs.
         let pwr = unsafe { &*pac::POWER::ptr() };
@@ -601,7 +624,7 @@ pub fn init(config: config::Config) -> Peripherals {
             pwr.dcdcen.write(|w| w.dcdcen().set_bit());
         }
     }
-    #[cfg(any(feature = "_nrf9160", feature = "_nrf9120"))]
+    #[cfg(feature = "_nrf91")]
     {
         // Setup DCDC.
         let reg = unsafe { &*pac::REGULATORS::ptr() };
@@ -633,7 +656,7 @@ pub fn init(config: config::Config) -> Peripherals {
     time_driver::init(config.time_interrupt_priority);
 
     // Disable UARTE (enabled by default for some reason)
-    #[cfg(any(feature = "_nrf9160", feature = "_nrf9120"))]
+    #[cfg(feature = "_nrf91")]
     unsafe {
         (*pac::UARTE0::ptr()).enable.write(|w| w.enable().disabled());
         (*pac::UARTE1::ptr()).enable.write(|w| w.enable().disabled());
diff --git a/embassy-nrf/src/nvmc.rs b/embassy-nrf/src/nvmc.rs
index df027636c..9b17e7da0 100644
--- a/embassy-nrf/src/nvmc.rs
+++ b/embassy-nrf/src/nvmc.rs
@@ -60,23 +60,23 @@ impl<'d> Nvmc<'d> {
         while p.ready.read().ready().is_busy() {}
     }
 
-    #[cfg(not(any(feature = "_nrf9160", feature = "_nrf5340")))]
+    #[cfg(not(any(feature = "_nrf91", feature = "_nrf5340")))]
     fn wait_ready_write(&mut self) {
         self.wait_ready();
     }
 
-    #[cfg(any(feature = "_nrf9160", feature = "_nrf5340"))]
+    #[cfg(any(feature = "_nrf91", feature = "_nrf5340"))]
     fn wait_ready_write(&mut self) {
         let p = Self::regs();
         while p.readynext.read().readynext().is_busy() {}
     }
 
-    #[cfg(not(any(feature = "_nrf9160", feature = "_nrf9120", feature = "_nrf5340")))]
+    #[cfg(not(any(feature = "_nrf91", feature = "_nrf5340")))]
     fn erase_page(&mut self, page_addr: u32) {
         Self::regs().erasepage().write(|w| unsafe { w.bits(page_addr) });
     }
 
-    #[cfg(any(feature = "_nrf9160", feature = "_nrf9120", feature = "_nrf5340"))]
+    #[cfg(any(feature = "_nrf91", feature = "_nrf5340"))]
     fn erase_page(&mut self, page_addr: u32) {
         let first_page_word = page_addr as *mut u32;
         unsafe {
diff --git a/embassy-nrf/src/pdm.rs b/embassy-nrf/src/pdm.rs
index c1501e02e..5160fe3c4 100644
--- a/embassy-nrf/src/pdm.rs
+++ b/embassy-nrf/src/pdm.rs
@@ -21,7 +21,7 @@ pub use crate::pac::pdm::pdmclkctrl::FREQ_A as Frequency;
     feature = "nrf52840",
     feature = "nrf52833",
     feature = "_nrf5340-app",
-    feature = "_nrf9160",
+    feature = "_nrf91",
 ))]
 pub use crate::pac::pdm::ratio::RATIO_A as Ratio;
 use crate::{interrupt, Peripheral};
@@ -121,7 +121,7 @@ impl<'d, T: Instance> Pdm<'d, T> {
             feature = "nrf52840",
             feature = "nrf52833",
             feature = "_nrf5340-app",
-            feature = "_nrf9160",
+            feature = "_nrf91",
         ))]
         r.ratio.write(|w| w.ratio().variant(config.ratio));
         r.mode.write(|w| {
@@ -374,7 +374,7 @@ pub struct Config {
         feature = "nrf52840",
         feature = "nrf52833",
         feature = "_nrf5340-app",
-        feature = "_nrf9160",
+        feature = "_nrf91",
     ))]
     pub ratio: Ratio,
     /// Gain left in dB
@@ -393,7 +393,7 @@ impl Default for Config {
                 feature = "nrf52840",
                 feature = "nrf52833",
                 feature = "_nrf5340-app",
-                feature = "_nrf9160",
+                feature = "_nrf91",
             ))]
             ratio: Ratio::RATIO80,
             gain_left: I7F1::ZERO,
diff --git a/embassy-nrf/src/saadc.rs b/embassy-nrf/src/saadc.rs
index e139b15da..3a94cbd8f 100644
--- a/embassy-nrf/src/saadc.rs
+++ b/embassy-nrf/src/saadc.rs
@@ -722,9 +722,9 @@ macro_rules! impl_saadc_input {
 pub struct VddInput;
 
 impl_peripheral!(VddInput);
-#[cfg(not(any(feature = "_nrf9160", feature = "_nrf9120")))]
+#[cfg(not(feature = "_nrf91"))]
 impl_saadc_input!(@local, VddInput, VDD);
-#[cfg(not(any(feature = "_nrf9160", feature = "_nrf9120")))]
+#[cfg(not(feature = "_nrf91"))]
 impl_saadc_input!(@local, VddInput, VDDGPIO);
 
 /// A dummy `Input` pin implementation for SAADC peripheral sampling from the
diff --git a/embassy-nrf/src/wdt.rs b/embassy-nrf/src/wdt.rs
index 5b3e1e930..5a261ce8f 100644
--- a/embassy-nrf/src/wdt.rs
+++ b/embassy-nrf/src/wdt.rs
@@ -30,9 +30,9 @@ impl Config {
     pub fn try_new(_wdt: &peripherals::WDT) -> Option<Self> {
         let r = unsafe { &*WDT::ptr() };
 
-        #[cfg(not(any(feature = "_nrf9160", feature = "_nrf9120")))]
+        #[cfg(not(feature = "_nrf91"))]
         let runstatus = r.runstatus.read().runstatus().bit();
-        #[cfg(any(feature = "_nrf9160", feature = "_nrf9120"))]
+        #[cfg(feature = "_nrf91")]
         let runstatus = r.runstatus.read().runstatuswdt().bit();
 
         if runstatus {
@@ -83,9 +83,9 @@ impl Watchdog {
         let crv = config.timeout_ticks.max(MIN_TICKS);
         let rren = (1u32 << N) - 1;
 
-        #[cfg(not(any(feature = "_nrf9160", feature = "_nrf9120")))]
+        #[cfg(not(feature = "_nrf91"))]
         let runstatus = r.runstatus.read().runstatus().bit();
-        #[cfg(any(feature = "_nrf9160", feature = "_nrf9120"))]
+        #[cfg(feature = "_nrf91")]
         let runstatus = r.runstatus.read().runstatuswdt().bit();
 
         if runstatus {