Move

23 files changed, 3035 insertions, 0 deletions

diff --git a/examples/mcxa/src/bin/adc_interrupt.rs b/examples/mcxa/src/bin/adc_interrupt.rs
new file mode 100644
index 000000000..83d8046b3
--- /dev/null
+++ b/examples/mcxa/src/bin/adc_interrupt.rs
@@ -0,0 +1,84 @@
+#![no_std]
+#![no_main]
+
+use embassy_executor::Spawner;
+use embassy_mcxa_examples::init_adc_pins;
+use hal::adc::{LpadcConfig, TriggerPriorityPolicy};
+use hal::clocks::periph_helpers::{AdcClockSel, Div4};
+use hal::clocks::PoweredClock;
+use hal::pac::adc1::cfg::{Pwrsel, Refsel};
+use hal::pac::adc1::cmdl1::{Adch, Mode};
+use hal::pac::adc1::ctrl::CalAvgs;
+use hal::pac::adc1::tctrl::Tcmd;
+use hal::{bind_interrupts, InterruptExt};
+use {defmt_rtt as _, embassy_mcxa as hal, panic_probe as _};
+
+bind_interrupts!(struct Irqs {
+    ADC1 => hal::adc::AdcHandler;
+});
+
+#[used]
+#[no_mangle]
+static KEEP_ADC: unsafe extern "C" fn() = ADC1;
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let p = hal::init(hal::config::Config::default());
+
+    defmt::info!("ADC interrupt Example");
+
+    unsafe {
+        init_adc_pins();
+    }
+
+    let adc_config = LpadcConfig {
+        enable_in_doze_mode: true,
+        conversion_average_mode: CalAvgs::Average128,
+        enable_analog_preliminary: true,
+        power_up_delay: 0x80,
+        reference_voltage_source: Refsel::Option3,
+        power_level_mode: Pwrsel::Lowest,
+        trigger_priority_policy: TriggerPriorityPolicy::ConvPreemptImmediatelyNotAutoResumed,
+        enable_conv_pause: false,
+        conv_pause_delay: 0,
+        fifo_watermark: 0,
+        power: PoweredClock::NormalEnabledDeepSleepDisabled,
+        source: AdcClockSel::FroLfDiv,
+        div: Div4::no_div(),
+    };
+    let adc = hal::adc::Adc::<hal::adc::Adc1>::new(p.ADC1, adc_config);
+
+    adc.do_offset_calibration();
+    adc.do_auto_calibration();
+
+    let mut conv_command_config = adc.get_default_conv_command_config();
+    conv_command_config.channel_number = Adch::SelectCorrespondingChannel8;
+    conv_command_config.conversion_resolution_mode = Mode::Data16Bits;
+    adc.set_conv_command_config(1, &conv_command_config);
+
+    let mut conv_trigger_config = adc.get_default_conv_trigger_config();
+    conv_trigger_config.target_command_id = Tcmd::ExecuteCmd1;
+    conv_trigger_config.enable_hardware_trigger = false;
+    adc.set_conv_trigger_config(0, &conv_trigger_config);
+
+    defmt::info!("ADC configuration done...");
+
+    adc.enable_interrupt(0x1);
+
+    unsafe {
+        hal::interrupt::ADC1.enable();
+    }
+
+    unsafe {
+        cortex_m::interrupt::enable();
+    }
+
+    loop {
+        adc.do_software_trigger(1);
+        while !adc.is_interrupt_triggered() {
+            // Wait until the interrupt is triggered
+        }
+        defmt::info!("*** ADC interrupt TRIGGERED! ***");
+        //TBD need to print the value
+    }
+}
diff --git a/examples/mcxa/src/bin/adc_polling.rs b/examples/mcxa/src/bin/adc_polling.rs
new file mode 100644
index 000000000..ddf3f586b
--- /dev/null
+++ b/examples/mcxa/src/bin/adc_polling.rs
@@ -0,0 +1,68 @@
+#![no_std]
+#![no_main]
+
+use embassy_executor::Spawner;
+use embassy_mcxa_examples::init_adc_pins;
+use hal::adc::{ConvResult, LpadcConfig, TriggerPriorityPolicy};
+use hal::clocks::periph_helpers::{AdcClockSel, Div4};
+use hal::clocks::PoweredClock;
+use hal::pac::adc1::cfg::{Pwrsel, Refsel};
+use hal::pac::adc1::cmdl1::{Adch, Mode};
+use hal::pac::adc1::ctrl::CalAvgs;
+use hal::pac::adc1::tctrl::Tcmd;
+use {defmt_rtt as _, embassy_mcxa as hal, panic_probe as _};
+
+const G_LPADC_RESULT_SHIFT: u32 = 0;
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let p = hal::init(hal::config::Config::default());
+
+    unsafe {
+        init_adc_pins();
+    }
+
+    defmt::info!("=== ADC polling Example ===");
+
+    let adc_config = LpadcConfig {
+        enable_in_doze_mode: true,
+        conversion_average_mode: CalAvgs::Average128,
+        enable_analog_preliminary: true,
+        power_up_delay: 0x80,
+        reference_voltage_source: Refsel::Option3,
+        power_level_mode: Pwrsel::Lowest,
+        trigger_priority_policy: TriggerPriorityPolicy::ConvPreemptImmediatelyNotAutoResumed,
+        enable_conv_pause: false,
+        conv_pause_delay: 0,
+        fifo_watermark: 0,
+        power: PoweredClock::NormalEnabledDeepSleepDisabled,
+        source: AdcClockSel::FroLfDiv,
+        div: Div4::no_div(),
+    };
+    let adc = hal::adc::Adc::<hal::adc::Adc1>::new(p.ADC1, adc_config);
+
+    adc.do_offset_calibration();
+    adc.do_auto_calibration();
+
+    let mut conv_command_config = adc.get_default_conv_command_config();
+    conv_command_config.channel_number = Adch::SelectCorrespondingChannel8;
+    conv_command_config.conversion_resolution_mode = Mode::Data16Bits;
+    adc.set_conv_command_config(1, &conv_command_config);
+
+    let mut conv_trigger_config = adc.get_default_conv_trigger_config();
+    conv_trigger_config.target_command_id = Tcmd::ExecuteCmd1;
+    conv_trigger_config.enable_hardware_trigger = false;
+    adc.set_conv_trigger_config(0, &conv_trigger_config);
+
+    defmt::info!("=== ADC configuration done... ===");
+
+    loop {
+        adc.do_software_trigger(1);
+        let mut result: Option<ConvResult> = None;
+        while result.is_none() {
+            result = hal::adc::get_conv_result();
+        }
+        let value = result.unwrap().conv_value >> G_LPADC_RESULT_SHIFT;
+        defmt::info!("value: {=u16}", value);
+    }
+}
diff --git a/examples/mcxa/src/bin/blinky.rs b/examples/mcxa/src/bin/blinky.rs
new file mode 100644
index 000000000..dd08ec0d9
--- /dev/null
+++ b/examples/mcxa/src/bin/blinky.rs
@@ -0,0 +1,36 @@
+#![no_std]
+#![no_main]
+
+use embassy_executor::Spawner;
+use embassy_time::Timer;
+use hal::gpio::{DriveStrength, Level, Output, SlewRate};
+use {defmt_rtt as _, embassy_mcxa as hal, panic_probe as _};
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let p = hal::init(hal::config::Config::default());
+
+    defmt::info!("Blink example");
+
+    let mut red = Output::new(p.P3_18, Level::High, DriveStrength::Normal, SlewRate::Fast);
+    let mut green = Output::new(p.P3_19, Level::High, DriveStrength::Normal, SlewRate::Fast);
+    let mut blue = Output::new(p.P3_21, Level::High, DriveStrength::Normal, SlewRate::Fast);
+
+    loop {
+        defmt::info!("Toggle LEDs");
+
+        red.toggle();
+        Timer::after_millis(250).await;
+
+        red.toggle();
+        green.toggle();
+        Timer::after_millis(250).await;
+
+        green.toggle();
+        blue.toggle();
+        Timer::after_millis(250).await;
+        blue.toggle();
+
+        Timer::after_millis(250).await;
+    }
+}
diff --git a/examples/mcxa/src/bin/button.rs b/examples/mcxa/src/bin/button.rs
new file mode 100644
index 000000000..943edbb15
--- /dev/null
+++ b/examples/mcxa/src/bin/button.rs
@@ -0,0 +1,23 @@
+#![no_std]
+#![no_main]
+
+use embassy_executor::Spawner;
+use embassy_time::Timer;
+use hal::gpio::{Input, Pull};
+use {defmt_rtt as _, embassy_mcxa as hal, panic_probe as _};
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let p = hal::init(hal::config::Config::default());
+
+    defmt::info!("Button example");
+
+    // This button is labeled "WAKEUP" on the FRDM-MCXA276
+    // The board already has a 10K pullup
+    let monitor = Input::new(p.P1_7, Pull::Disabled);
+
+    loop {
+        defmt::info!("Pin level is {:?}", monitor.get_level());
+        Timer::after_millis(1000).await;
+    }
+}
diff --git a/examples/mcxa/src/bin/button_async.rs b/examples/mcxa/src/bin/button_async.rs
new file mode 100644
index 000000000..6cc7b62cd
--- /dev/null
+++ b/examples/mcxa/src/bin/button_async.rs
@@ -0,0 +1,29 @@
+#![no_std]
+#![no_main]
+
+use embassy_executor::Spawner;
+use embassy_time::Timer;
+use hal::gpio::{Input, Pull};
+use {defmt_rtt as _, embassy_mcxa as hal, panic_probe as _};
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let p = hal::init(hal::config::Config::default());
+
+    defmt::info!("GPIO interrupt example");
+
+    // This button is labeled "WAKEUP" on the FRDM-MCXA276
+    // The board already has a 10K pullup
+    let mut pin = Input::new(p.P1_7, Pull::Disabled);
+
+    let mut press_count = 0u32;
+
+    loop {
+        pin.wait_for_falling_edge().await;
+
+        press_count += 1;
+
+        defmt::info!("Button pressed! Count: {}", press_count);
+        Timer::after_millis(50).await;
+    }
+}
diff --git a/examples/mcxa/src/bin/clkout.rs b/examples/mcxa/src/bin/clkout.rs
new file mode 100644
index 000000000..bfd963540
--- /dev/null
+++ b/examples/mcxa/src/bin/clkout.rs
@@ -0,0 +1,69 @@
+#![no_std]
+#![no_main]
+
+use embassy_executor::Spawner;
+use embassy_mcxa::clkout::{ClockOut, ClockOutSel, Config, Div4};
+use embassy_mcxa::clocks::PoweredClock;
+use embassy_mcxa::gpio::{DriveStrength, SlewRate};
+use embassy_mcxa::{Level, Output};
+use embassy_time::Timer;
+use {defmt_rtt as _, embassy_mcxa as hal, panic_probe as _};
+
+/// Demonstrate CLKOUT, using Pin P4.2
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let p = hal::init(hal::config::Config::default());
+    let mut pin = p.P4_2;
+    let mut clkout = p.CLKOUT;
+
+    loop {
+        defmt::info!("Set Low...");
+        let mut output = Output::new(pin.reborrow(), Level::Low, DriveStrength::Normal, SlewRate::Slow);
+        Timer::after_millis(500).await;
+
+        defmt::info!("Set High...");
+        output.set_high();
+        Timer::after_millis(400).await;
+
+        defmt::info!("Set Low...");
+        output.set_low();
+        Timer::after_millis(500).await;
+
+        defmt::info!("16k...");
+        // Run Clock Out with the 16K clock
+        let _clock_out = ClockOut::new(
+            clkout.reborrow(),
+            pin.reborrow(),
+            Config {
+                sel: ClockOutSel::Clk16K,
+                div: Div4::no_div(),
+                level: PoweredClock::NormalEnabledDeepSleepDisabled,
+            },
+        )
+        .unwrap();
+
+        Timer::after_millis(3000).await;
+
+        defmt::info!("Set Low...");
+        drop(_clock_out);
+
+        let _output = Output::new(pin.reborrow(), Level::Low, DriveStrength::Normal, SlewRate::Slow);
+        Timer::after_millis(500).await;
+
+        // Run Clock Out with the 12M clock, divided by 3
+        defmt::info!("4M...");
+        let _clock_out = ClockOut::new(
+            clkout.reborrow(),
+            pin.reborrow(),
+            Config {
+                sel: ClockOutSel::Fro12M,
+                div: const { Div4::from_divisor(3).unwrap() },
+                level: PoweredClock::NormalEnabledDeepSleepDisabled,
+            },
+        )
+        .unwrap();
+
+        // Let it run for 3 seconds...
+        Timer::after_millis(3000).await;
+    }
+}
diff --git a/examples/mcxa/src/bin/dma_channel_link.rs b/examples/mcxa/src/bin/dma_channel_link.rs
new file mode 100644
index 000000000..92c7a9681
--- /dev/null
+++ b/examples/mcxa/src/bin/dma_channel_link.rs
@@ -0,0 +1,372 @@
+//! DMA channel linking example for MCXA276.
+//!
+//! This example demonstrates DMA channel linking (minor and major loop linking):
+//! - Channel 0: Transfers SRC_BUFFER to DEST_BUFFER0, with:
+//!   - Minor Link to Channel 1 (triggers CH1 after each minor loop)
+//!   - Major Link to Channel 2 (triggers CH2 after major loop completes)
+//! - Channel 1: Transfers SRC_BUFFER to DEST_BUFFER1 (triggered by CH0 minor link)
+//! - Channel 2: Transfers SRC_BUFFER to DEST_BUFFER2 (triggered by CH0 major link)
+//!
+//! # Embassy-style features demonstrated:
+//! - `DmaChannel::new()` for channel creation
+//! - `DmaChannel::is_done()` and `clear_done()` helper methods
+//! - Channel linking with `set_minor_link()` and `set_major_link()`
+//! - Standard `DmaCh*InterruptHandler` with `bind_interrupts!` macro
+
+#![no_std]
+#![no_main]
+
+use embassy_executor::Spawner;
+use embassy_mcxa::clocks::config::Div8;
+use embassy_mcxa::dma::{DmaCh0InterruptHandler, DmaCh1InterruptHandler, DmaCh2InterruptHandler, DmaChannel};
+use embassy_mcxa::lpuart::{Blocking, Config, Lpuart, LpuartTx};
+use embassy_mcxa::{bind_interrupts, pac};
+use {defmt_rtt as _, embassy_mcxa as hal, panic_probe as _};
+
+// Buffers
+static mut SRC_BUFFER: [u32; 4] = [1, 2, 3, 4];
+static mut DEST_BUFFER0: [u32; 4] = [0; 4];
+static mut DEST_BUFFER1: [u32; 4] = [0; 4];
+static mut DEST_BUFFER2: [u32; 4] = [0; 4];
+
+// Bind DMA channel interrupts using Embassy-style macro
+// The standard handlers call on_interrupt() which wakes wakers and clears flags
+bind_interrupts!(struct Irqs {
+    DMA_CH0 => DmaCh0InterruptHandler;
+    DMA_CH1 => DmaCh1InterruptHandler;
+    DMA_CH2 => DmaCh2InterruptHandler;
+});
+
+/// Helper to write a u32 as decimal ASCII to UART
+fn write_u32(tx: &mut LpuartTx<'_, Blocking>, val: u32) {
+    let mut buf = [0u8; 10];
+    let mut n = val;
+    let mut i = buf.len();
+
+    if n == 0 {
+        tx.blocking_write(b"0").ok();
+        return;
+    }
+
+    while n > 0 {
+        i -= 1;
+        buf[i] = b'0' + (n % 10) as u8;
+        n /= 10;
+    }
+
+    tx.blocking_write(&buf[i..]).ok();
+}
+
+/// Helper to print a buffer to UART
+fn print_buffer(tx: &mut LpuartTx<'_, Blocking>, buf_ptr: *const u32, len: usize) {
+    tx.blocking_write(b"[").ok();
+    unsafe {
+        for i in 0..len {
+            write_u32(tx, *buf_ptr.add(i));
+            if i < len - 1 {
+                tx.blocking_write(b", ").ok();
+            }
+        }
+    }
+    tx.blocking_write(b"]").ok();
+}
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    // Small delay to allow probe-rs to attach after reset
+    for _ in 0..100_000 {
+        cortex_m::asm::nop();
+    }
+
+    let mut cfg = hal::config::Config::default();
+    cfg.clock_cfg.sirc.fro_12m_enabled = true;
+    cfg.clock_cfg.sirc.fro_lf_div = Some(Div8::no_div());
+    let p = hal::init(cfg);
+
+    defmt::info!("DMA channel link example starting...");
+
+    // DMA is initialized during hal::init() - no need to call ensure_init()
+
+    let pac_periphs = unsafe { pac::Peripherals::steal() };
+    let dma0 = &pac_periphs.dma0;
+    let edma = unsafe { &*pac::Edma0Tcd0::ptr() };
+
+    // Clear any residual state
+    for i in 0..3 {
+        let t = edma.tcd(i);
+        t.ch_csr().write(|w| w.erq().disable().done().clear_bit_by_one());
+        t.ch_int().write(|w| w.int().clear_bit_by_one());
+        t.ch_es().write(|w| w.err().clear_bit_by_one());
+        t.ch_mux().write(|w| unsafe { w.bits(0) });
+    }
+
+    // Clear Global Halt/Error state
+    dma0.mp_csr().modify(|_, w| {
+        w.halt()
+            .normal_operation()
+            .hae()
+            .normal_operation()
+            .ecx()
+            .normal_operation()
+            .cx()
+            .normal_operation()
+    });
+
+    unsafe {
+        cortex_m::peripheral::NVIC::unmask(pac::Interrupt::DMA_CH0);
+        cortex_m::peripheral::NVIC::unmask(pac::Interrupt::DMA_CH1);
+        cortex_m::peripheral::NVIC::unmask(pac::Interrupt::DMA_CH2);
+    }
+
+    let config = Config {
+        baudrate_bps: 115_200,
+        ..Default::default()
+    };
+
+    let lpuart = Lpuart::new_blocking(p.LPUART2, p.P2_2, p.P2_3, config).unwrap();
+    let (mut tx, _rx) = lpuart.split();
+
+    tx.blocking_write(b"EDMA channel link example begin.\r\n\r\n").unwrap();
+
+    // Initialize buffers
+    unsafe {
+        SRC_BUFFER = [1, 2, 3, 4];
+        DEST_BUFFER0 = [0; 4];
+        DEST_BUFFER1 = [0; 4];
+        DEST_BUFFER2 = [0; 4];
+    }
+
+    tx.blocking_write(b"Source Buffer:   ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(SRC_BUFFER) as *const u32, 4);
+    tx.blocking_write(b"\r\n").unwrap();
+
+    tx.blocking_write(b"DEST0 (before):  ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(DEST_BUFFER0) as *const u32, 4);
+    tx.blocking_write(b"\r\n").unwrap();
+
+    tx.blocking_write(b"DEST1 (before):  ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(DEST_BUFFER1) as *const u32, 4);
+    tx.blocking_write(b"\r\n").unwrap();
+
+    tx.blocking_write(b"DEST2 (before):  ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(DEST_BUFFER2) as *const u32, 4);
+    tx.blocking_write(b"\r\n\r\n").unwrap();
+
+    tx.blocking_write(b"Configuring DMA channels with Embassy-style API...\r\n")
+        .unwrap();
+
+    let ch0 = DmaChannel::new(p.DMA_CH0);
+    let ch1 = DmaChannel::new(p.DMA_CH1);
+    let ch2 = DmaChannel::new(p.DMA_CH2);
+
+    // Configure channels using direct TCD access (advanced feature demo)
+    // This example demonstrates channel linking which requires direct TCD manipulation
+
+    // Helper to configure TCD for memory-to-memory transfer
+    // Parameters: channel, src, dst, width, nbytes (minor loop), count (major loop), interrupt
+    #[allow(clippy::too_many_arguments)]
+    unsafe fn configure_tcd(
+        edma: &embassy_mcxa::pac::edma_0_tcd0::RegisterBlock,
+        ch: usize,
+        src: u32,
+        dst: u32,
+        width: u8,
+        nbytes: u32,
+        count: u16,
+        enable_int: bool,
+    ) {
+        let t = edma.tcd(ch);
+
+        // Reset channel state
+        t.ch_csr().write(|w| {
+            w.erq()
+                .disable()
+                .earq()
+                .disable()
+                .eei()
+                .no_error()
+                .ebw()
+                .disable()
+                .done()
+                .clear_bit_by_one()
+        });
+        t.ch_es().write(|w| w.bits(0));
+        t.ch_int().write(|w| w.int().clear_bit_by_one());
+
+        // Source/destination addresses
+        t.tcd_saddr().write(|w| w.saddr().bits(src));
+        t.tcd_daddr().write(|w| w.daddr().bits(dst));
+
+        // Offsets: increment by width
+        t.tcd_soff().write(|w| w.soff().bits(width as u16));
+        t.tcd_doff().write(|w| w.doff().bits(width as u16));
+
+        // Attributes: size = log2(width)
+        let size = match width {
+            1 => 0,
+            2 => 1,
+            4 => 2,
+            _ => 0,
+        };
+        t.tcd_attr().write(|w| w.ssize().bits(size).dsize().bits(size));
+
+        // Number of bytes per minor loop
+        t.tcd_nbytes_mloffno().write(|w| w.nbytes().bits(nbytes));
+
+        // Major loop: reset source address after major loop
+        let total_bytes = nbytes * count as u32;
+        t.tcd_slast_sda()
+            .write(|w| w.slast_sda().bits(-(total_bytes as i32) as u32));
+        t.tcd_dlast_sga()
+            .write(|w| w.dlast_sga().bits(-(total_bytes as i32) as u32));
+
+        // Major loop count
+        t.tcd_biter_elinkno().write(|w| w.biter().bits(count));
+        t.tcd_citer_elinkno().write(|w| w.citer().bits(count));
+
+        // Control/status: enable interrupt if requested
+        if enable_int {
+            t.tcd_csr().write(|w| w.intmajor().set_bit());
+        } else {
+            t.tcd_csr().write(|w| w.intmajor().clear_bit());
+        }
+
+        cortex_m::asm::dsb();
+    }
+
+    unsafe {
+        // Channel 0: Transfer 16 bytes total (8 bytes per minor loop, 2 major iterations)
+        // Minor Link -> Channel 1
+        // Major Link -> Channel 2
+        configure_tcd(
+            edma,
+            0,
+            core::ptr::addr_of!(SRC_BUFFER) as u32,
+            core::ptr::addr_of_mut!(DEST_BUFFER0) as u32,
+            4,     // src width
+            8,     // nbytes (minor loop = 2 words)
+            2,     // count (major loop = 2 iterations)
+            false, // no interrupt
+        );
+        ch0.set_minor_link(1); // Link to CH1 after each minor loop
+        ch0.set_major_link(2); // Link to CH2 after major loop
+
+        // Channel 1: Transfer 16 bytes (triggered by CH0 minor link)
+        configure_tcd(
+            edma,
+            1,
+            core::ptr::addr_of!(SRC_BUFFER) as u32,
+            core::ptr::addr_of_mut!(DEST_BUFFER1) as u32,
+            4,
+            16, // full buffer in one minor loop
+            1,  // 1 major iteration
+            false,
+        );
+
+        // Channel 2: Transfer 16 bytes (triggered by CH0 major link)
+        configure_tcd(
+            edma,
+            2,
+            core::ptr::addr_of!(SRC_BUFFER) as u32,
+            core::ptr::addr_of_mut!(DEST_BUFFER2) as u32,
+            4,
+            16,   // full buffer in one minor loop
+            1,    // 1 major iteration
+            true, // enable interrupt
+        );
+    }
+
+    tx.blocking_write(b"Triggering Channel 0 (1st minor loop)...\r\n")
+        .unwrap();
+
+    // Trigger first minor loop of CH0
+    unsafe {
+        ch0.trigger_start();
+    }
+
+    // Wait for CH1 to complete (triggered by CH0 minor link)
+    while !ch1.is_done() {
+        cortex_m::asm::nop();
+    }
+    unsafe {
+        ch1.clear_done();
+    }
+
+    tx.blocking_write(b"CH1 done (via minor link).\r\n").unwrap();
+    tx.blocking_write(b"Triggering Channel 0 (2nd minor loop)...\r\n")
+        .unwrap();
+
+    // Trigger second minor loop of CH0
+    unsafe {
+        ch0.trigger_start();
+    }
+
+    // Wait for CH0 major loop to complete
+    while !ch0.is_done() {
+        cortex_m::asm::nop();
+    }
+    unsafe {
+        ch0.clear_done();
+    }
+
+    tx.blocking_write(b"CH0 major loop done.\r\n").unwrap();
+
+    // Wait for CH2 to complete (triggered by CH0 major link)
+    // Using is_done() instead of AtomicBool - the standard interrupt handler
+    // clears the interrupt flag and wakes wakers, but DONE bit remains set
+    while !ch2.is_done() {
+        cortex_m::asm::nop();
+    }
+    unsafe {
+        ch2.clear_done();
+    }
+
+    tx.blocking_write(b"CH2 done (via major link).\r\n\r\n").unwrap();
+
+    tx.blocking_write(b"EDMA channel link example finish.\r\n\r\n").unwrap();
+
+    tx.blocking_write(b"DEST0 (after):   ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(DEST_BUFFER0) as *const u32, 4);
+    tx.blocking_write(b"\r\n").unwrap();
+
+    tx.blocking_write(b"DEST1 (after):   ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(DEST_BUFFER1) as *const u32, 4);
+    tx.blocking_write(b"\r\n").unwrap();
+
+    tx.blocking_write(b"DEST2 (after):   ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(DEST_BUFFER2) as *const u32, 4);
+    tx.blocking_write(b"\r\n\r\n").unwrap();
+
+    // Verify all buffers match source
+    let mut success = true;
+    unsafe {
+        let src_ptr = core::ptr::addr_of!(SRC_BUFFER) as *const u32;
+        let dst0_ptr = core::ptr::addr_of!(DEST_BUFFER0) as *const u32;
+        let dst1_ptr = core::ptr::addr_of!(DEST_BUFFER1) as *const u32;
+        let dst2_ptr = core::ptr::addr_of!(DEST_BUFFER2) as *const u32;
+
+        for i in 0..4 {
+            if *dst0_ptr.add(i) != *src_ptr.add(i) {
+                success = false;
+            }
+            if *dst1_ptr.add(i) != *src_ptr.add(i) {
+                success = false;
+            }
+            if *dst2_ptr.add(i) != *src_ptr.add(i) {
+                success = false;
+            }
+        }
+    }
+
+    if success {
+        tx.blocking_write(b"PASS: Data verified.\r\n").unwrap();
+        defmt::info!("PASS: Data verified.");
+    } else {
+        tx.blocking_write(b"FAIL: Mismatch detected!\r\n").unwrap();
+        defmt::error!("FAIL: Mismatch detected!");
+    }
+
+    loop {
+        cortex_m::asm::wfe();
+    }
+}
diff --git a/examples/mcxa/src/bin/dma_interleave_transfer.rs b/examples/mcxa/src/bin/dma_interleave_transfer.rs
new file mode 100644
index 000000000..7876e8978
--- /dev/null
+++ b/examples/mcxa/src/bin/dma_interleave_transfer.rs
@@ -0,0 +1,215 @@
+//! DMA interleaved transfer example for MCXA276.
+//!
+//! This example demonstrates using DMA with custom source/destination offsets
+//! to interleave data during transfer.
+//!
+//! # Embassy-style features demonstrated:
+//! - `TransferOptions::default()` for configuration (used internally)
+//! - DMA channel with `DmaChannel::new()`
+
+#![no_std]
+#![no_main]
+
+use embassy_executor::Spawner;
+use embassy_mcxa::clocks::config::Div8;
+use embassy_mcxa::dma::{DmaCh0InterruptHandler, DmaChannel};
+use embassy_mcxa::lpuart::{Blocking, Config, Lpuart, LpuartTx};
+use embassy_mcxa::{bind_interrupts, pac};
+use {defmt_rtt as _, embassy_mcxa as hal, panic_probe as _};
+
+// Bind DMA channel 0 interrupt using Embassy-style macro
+bind_interrupts!(struct Irqs {
+    DMA_CH0 => DmaCh0InterruptHandler;
+});
+
+const BUFFER_LENGTH: usize = 16;
+const HALF_BUFF_LENGTH: usize = BUFFER_LENGTH / 2;
+
+// Buffers in RAM
+static mut SRC_BUFFER: [u32; HALF_BUFF_LENGTH] = [0; HALF_BUFF_LENGTH];
+static mut DEST_BUFFER: [u32; BUFFER_LENGTH] = [0; BUFFER_LENGTH];
+
+/// Helper to write a u32 as decimal ASCII to UART
+fn write_u32(tx: &mut LpuartTx<'_, Blocking>, val: u32) {
+    let mut buf = [0u8; 10];
+    let mut n = val;
+    let mut i = buf.len();
+
+    if n == 0 {
+        tx.blocking_write(b"0").ok();
+        return;
+    }
+
+    while n > 0 {
+        i -= 1;
+        buf[i] = b'0' + (n % 10) as u8;
+        n /= 10;
+    }
+
+    tx.blocking_write(&buf[i..]).ok();
+}
+
+/// Helper to print a buffer to UART
+fn print_buffer(tx: &mut LpuartTx<'_, Blocking>, buf_ptr: *const u32, len: usize) {
+    tx.blocking_write(b"[").ok();
+    unsafe {
+        for i in 0..len {
+            write_u32(tx, *buf_ptr.add(i));
+            if i < len - 1 {
+                tx.blocking_write(b", ").ok();
+            }
+        }
+    }
+    tx.blocking_write(b"]").ok();
+}
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    // Small delay to allow probe-rs to attach after reset
+    for _ in 0..100_000 {
+        cortex_m::asm::nop();
+    }
+
+    let mut cfg = hal::config::Config::default();
+    cfg.clock_cfg.sirc.fro_12m_enabled = true;
+    cfg.clock_cfg.sirc.fro_lf_div = Some(Div8::no_div());
+    let p = hal::init(cfg);
+
+    defmt::info!("DMA interleave transfer example starting...");
+
+    // Enable DMA interrupt (DMA clock/reset/init is handled automatically by HAL)
+    unsafe {
+        cortex_m::peripheral::NVIC::unmask(pac::Interrupt::DMA_CH0);
+    }
+
+    let config = Config {
+        baudrate_bps: 115_200,
+        ..Default::default()
+    };
+
+    let lpuart = Lpuart::new_blocking(p.LPUART2, p.P2_2, p.P2_3, config).unwrap();
+    let (mut tx, _rx) = lpuart.split();
+
+    tx.blocking_write(b"EDMA interleave transfer example begin.\r\n\r\n")
+        .unwrap();
+
+    // Initialize buffers
+    unsafe {
+        SRC_BUFFER = [1, 2, 3, 4, 5, 6, 7, 8];
+        DEST_BUFFER = [0; BUFFER_LENGTH];
+    }
+
+    tx.blocking_write(b"Source Buffer:              ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(SRC_BUFFER) as *const u32, HALF_BUFF_LENGTH);
+    tx.blocking_write(b"\r\n").unwrap();
+
+    tx.blocking_write(b"Destination Buffer (before): ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(DEST_BUFFER) as *const u32, BUFFER_LENGTH);
+    tx.blocking_write(b"\r\n").unwrap();
+
+    tx.blocking_write(b"Configuring DMA with Embassy-style API...\r\n")
+        .unwrap();
+
+    // Create DMA channel using Embassy-style API
+    let dma_ch0 = DmaChannel::new(p.DMA_CH0);
+
+    // Configure interleaved transfer using direct TCD access:
+    // - src_offset = 4: advance source by 4 bytes after each read
+    // - dst_offset = 8: advance dest by 8 bytes after each write
+    // This spreads source data across every other word in destination
+    unsafe {
+        let t = dma_ch0.tcd();
+
+        // Reset channel state
+        t.ch_csr().write(|w| {
+            w.erq()
+                .disable()
+                .earq()
+                .disable()
+                .eei()
+                .no_error()
+                .ebw()
+                .disable()
+                .done()
+                .clear_bit_by_one()
+        });
+        t.ch_es().write(|w| w.bits(0));
+        t.ch_int().write(|w| w.int().clear_bit_by_one());
+
+        // Source/destination addresses
+        t.tcd_saddr()
+            .write(|w| w.saddr().bits(core::ptr::addr_of_mut!(SRC_BUFFER) as u32));
+        t.tcd_daddr()
+            .write(|w| w.daddr().bits(core::ptr::addr_of_mut!(DEST_BUFFER) as u32));
+
+        // Custom offsets for interleaving
+        t.tcd_soff().write(|w| w.soff().bits(4)); // src: +4 bytes per read
+        t.tcd_doff().write(|w| w.doff().bits(8)); // dst: +8 bytes per write
+
+        // Attributes: 32-bit transfers (size = 2)
+        t.tcd_attr().write(|w| w.ssize().bits(2).dsize().bits(2));
+
+        // Transfer entire source buffer in one minor loop
+        let nbytes = (HALF_BUFF_LENGTH * 4) as u32;
+        t.tcd_nbytes_mloffno().write(|w| w.nbytes().bits(nbytes));
+
+        // Reset source address after major loop
+        t.tcd_slast_sda().write(|w| w.slast_sda().bits(-(nbytes as i32) as u32));
+        // Destination uses 2x offset, so adjust accordingly
+        let dst_total = (HALF_BUFF_LENGTH * 8) as u32;
+        t.tcd_dlast_sga()
+            .write(|w| w.dlast_sga().bits(-(dst_total as i32) as u32));
+
+        // Major loop count = 1
+        t.tcd_biter_elinkno().write(|w| w.biter().bits(1));
+        t.tcd_citer_elinkno().write(|w| w.citer().bits(1));
+
+        // Enable interrupt on major loop completion
+        t.tcd_csr().write(|w| w.intmajor().set_bit());
+
+        cortex_m::asm::dsb();
+
+        tx.blocking_write(b"Triggering transfer...\r\n").unwrap();
+        dma_ch0.trigger_start();
+    }
+
+    // Wait for completion using channel helper method
+    while !dma_ch0.is_done() {
+        cortex_m::asm::nop();
+    }
+    unsafe {
+        dma_ch0.clear_done();
+    }
+
+    tx.blocking_write(b"\r\nEDMA interleave transfer example finish.\r\n\r\n")
+        .unwrap();
+    tx.blocking_write(b"Destination Buffer (after):  ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(DEST_BUFFER) as *const u32, BUFFER_LENGTH);
+    tx.blocking_write(b"\r\n\r\n").unwrap();
+
+    // Verify: Even indices should match SRC_BUFFER[i/2], odd indices should be 0
+    let mut mismatch = false;
+    unsafe {
+        for i in 0..BUFFER_LENGTH {
+            if i % 2 == 0 {
+                if DEST_BUFFER[i] != SRC_BUFFER[i / 2] {
+                    mismatch = true;
+                }
+            } else if DEST_BUFFER[i] != 0 {
+                mismatch = true;
+            }
+        }
+    }
+
+    if mismatch {
+        tx.blocking_write(b"FAIL: Mismatch detected!\r\n").unwrap();
+        defmt::error!("FAIL: Mismatch detected!");
+    } else {
+        tx.blocking_write(b"PASS: Data verified.\r\n").unwrap();
+        defmt::info!("PASS: Data verified.");
+    }
+
+    loop {
+        cortex_m::asm::wfe();
+    }
+}
diff --git a/examples/mcxa/src/bin/dma_mem_to_mem.rs b/examples/mcxa/src/bin/dma_mem_to_mem.rs
new file mode 100644
index 000000000..68f70e742
--- /dev/null
+++ b/examples/mcxa/src/bin/dma_mem_to_mem.rs
@@ -0,0 +1,229 @@
+//! DMA memory-to-memory transfer example for MCXA276.
+//!
+//! This example demonstrates using DMA to copy data between memory buffers
+//! using the Embassy-style async API with type-safe transfers.
+//!
+//! # Embassy-style features demonstrated:
+//! - `TransferOptions` for configuration
+//! - Type-safe `mem_to_mem<u32>()` method with async `.await`
+//! - `Transfer` Future that can be `.await`ed
+//! - `Word` trait for automatic transfer width detection
+//! - `memset()` method for filling memory with a pattern
+
+#![no_std]
+#![no_main]
+
+use embassy_executor::Spawner;
+use embassy_mcxa::clocks::config::Div8;
+use embassy_mcxa::dma::{DmaCh0InterruptHandler, DmaChannel, TransferOptions};
+use embassy_mcxa::lpuart::{Blocking, Config, Lpuart, LpuartTx};
+use embassy_mcxa::{bind_interrupts, pac};
+use {defmt_rtt as _, embassy_mcxa as hal, panic_probe as _};
+
+// Bind DMA channel 0 interrupt using Embassy-style macro
+bind_interrupts!(struct Irqs {
+    DMA_CH0 => DmaCh0InterruptHandler;
+});
+
+const BUFFER_LENGTH: usize = 4;
+
+// Buffers in RAM (static mut is automatically placed in .bss/.data)
+static mut SRC_BUFFER: [u32; BUFFER_LENGTH] = [0; BUFFER_LENGTH];
+static mut DEST_BUFFER: [u32; BUFFER_LENGTH] = [0; BUFFER_LENGTH];
+static mut MEMSET_BUFFER: [u32; BUFFER_LENGTH] = [0; BUFFER_LENGTH];
+
+/// Helper to write a u32 as decimal ASCII to UART
+fn write_u32(tx: &mut LpuartTx<'_, Blocking>, val: u32) {
+    let mut buf = [0u8; 10]; // u32 max is 4294967295 (10 digits)
+    let mut n = val;
+    let mut i = buf.len();
+
+    if n == 0 {
+        tx.blocking_write(b"0").ok();
+        return;
+    }
+
+    while n > 0 {
+        i -= 1;
+        buf[i] = b'0' + (n % 10) as u8;
+        n /= 10;
+    }
+
+    tx.blocking_write(&buf[i..]).ok();
+}
+
+/// Helper to print a buffer as [v1, v2, v3, v4] to UART
+/// Takes a raw pointer to avoid warnings about shared references to mutable statics
+fn print_buffer(tx: &mut LpuartTx<'_, Blocking>, buf_ptr: *const [u32; BUFFER_LENGTH]) {
+    tx.blocking_write(b"[").ok();
+    unsafe {
+        let buf = &*buf_ptr;
+        for (i, val) in buf.iter().enumerate() {
+            write_u32(tx, *val);
+            if i < buf.len() - 1 {
+                tx.blocking_write(b", ").ok();
+            }
+        }
+    }
+    tx.blocking_write(b"]").ok();
+}
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    // Small delay to allow probe-rs to attach after reset
+    for _ in 0..100_000 {
+        cortex_m::asm::nop();
+    }
+
+    let mut cfg = hal::config::Config::default();
+    cfg.clock_cfg.sirc.fro_12m_enabled = true;
+    cfg.clock_cfg.sirc.fro_lf_div = Some(Div8::no_div());
+    let p = hal::init(cfg);
+
+    defmt::info!("DMA memory-to-memory example starting...");
+
+    // Enable DMA interrupt (DMA clock/reset/init is handled automatically by HAL)
+    unsafe {
+        cortex_m::peripheral::NVIC::unmask(pac::Interrupt::DMA_CH0);
+    }
+
+    // Create UART for debug output
+    let config = Config {
+        baudrate_bps: 115_200,
+        ..Default::default()
+    };
+
+    let lpuart = Lpuart::new_blocking(p.LPUART2, p.P2_2, p.P2_3, config).unwrap();
+    let (mut tx, _rx) = lpuart.split();
+
+    tx.blocking_write(b"EDMA memory to memory example begin.\r\n\r\n")
+        .unwrap();
+
+    // Initialize buffers
+    unsafe {
+        SRC_BUFFER = [1, 2, 3, 4];
+        DEST_BUFFER = [0; BUFFER_LENGTH];
+    }
+
+    tx.blocking_write(b"Source Buffer:            ").unwrap();
+    print_buffer(&mut tx, &raw const SRC_BUFFER);
+    tx.blocking_write(b"\r\n").unwrap();
+
+    tx.blocking_write(b"Destination Buffer (before): ").unwrap();
+    print_buffer(&mut tx, &raw const DEST_BUFFER);
+    tx.blocking_write(b"\r\n").unwrap();
+
+    tx.blocking_write(b"Configuring DMA with Embassy-style API...\r\n")
+        .unwrap();
+
+    // Create DMA channel
+    let dma_ch0 = DmaChannel::new(p.DMA_CH0);
+
+    // Configure transfer options (Embassy-style)
+    // TransferOptions defaults to: complete_transfer_interrupt = true
+    let options = TransferOptions::default();
+
+    // =========================================================================
+    // Part 1: Embassy-style async API demonstration (mem_to_mem)
+    // =========================================================================
+    //
+    // Use the new type-safe `mem_to_mem<u32>()` method:
+    // - Automatically determines transfer width from buffer element type (u32)
+    // - Returns a `Transfer` future that can be `.await`ed
+    // - Uses TransferOptions for consistent configuration
+    //
+    // Using async `.await` - the executor can run other tasks while waiting!
+
+    // Perform type-safe memory-to-memory transfer using Embassy-style async API
+    unsafe {
+        let src = &*core::ptr::addr_of!(SRC_BUFFER);
+        let dst = &mut *core::ptr::addr_of_mut!(DEST_BUFFER);
+
+        // Using async `.await` - the executor can run other tasks while waiting!
+        let transfer = dma_ch0.mem_to_mem(src, dst, options);
+        transfer.await;
+    }
+
+    tx.blocking_write(b"DMA mem-to-mem transfer complete!\r\n\r\n").unwrap();
+    tx.blocking_write(b"Destination Buffer (after):  ").unwrap();
+    print_buffer(&mut tx, &raw const DEST_BUFFER);
+    tx.blocking_write(b"\r\n").unwrap();
+
+    // Verify data
+    let mut mismatch = false;
+    unsafe {
+        for i in 0..BUFFER_LENGTH {
+            if SRC_BUFFER[i] != DEST_BUFFER[i] {
+                mismatch = true;
+                break;
+            }
+        }
+    }
+
+    if mismatch {
+        tx.blocking_write(b"FAIL: mem_to_mem mismatch!\r\n").unwrap();
+        defmt::error!("FAIL: mem_to_mem mismatch!");
+    } else {
+        tx.blocking_write(b"PASS: mem_to_mem verified.\r\n\r\n").unwrap();
+        defmt::info!("PASS: mem_to_mem verified.");
+    }
+
+    // =========================================================================
+    // Part 2: memset() demonstration
+    // =========================================================================
+    //
+    // The `memset()` method fills a buffer with a pattern value:
+    // - Fixed source address (pattern is read repeatedly)
+    // - Incrementing destination address
+    // - Uses the same Transfer future pattern
+
+    tx.blocking_write(b"--- Demonstrating memset() feature ---\r\n\r\n")
+        .unwrap();
+
+    tx.blocking_write(b"Memset Buffer (before):      ").unwrap();
+    print_buffer(&mut tx, &raw const MEMSET_BUFFER);
+    tx.blocking_write(b"\r\n").unwrap();
+
+    // Fill buffer with a pattern value using DMA memset
+    let pattern: u32 = 0xDEADBEEF;
+    tx.blocking_write(b"Filling with pattern 0xDEADBEEF...\r\n").unwrap();
+
+    unsafe {
+        let dst = &mut *core::ptr::addr_of_mut!(MEMSET_BUFFER);
+
+        // Using blocking_wait() for demonstration - also shows non-async usage
+        let transfer = dma_ch0.memset(&pattern, dst, options);
+        transfer.blocking_wait();
+    }
+
+    tx.blocking_write(b"DMA memset complete!\r\n\r\n").unwrap();
+    tx.blocking_write(b"Memset Buffer (after):       ").unwrap();
+    print_buffer(&mut tx, &raw const MEMSET_BUFFER);
+    tx.blocking_write(b"\r\n").unwrap();
+
+    // Verify memset result
+    let mut memset_ok = true;
+    unsafe {
+        #[allow(clippy::needless_range_loop)]
+        for i in 0..BUFFER_LENGTH {
+            if MEMSET_BUFFER[i] != pattern {
+                memset_ok = false;
+                break;
+            }
+        }
+    }
+
+    if !memset_ok {
+        tx.blocking_write(b"FAIL: memset mismatch!\r\n").unwrap();
+        defmt::error!("FAIL: memset mismatch!");
+    } else {
+        tx.blocking_write(b"PASS: memset verified.\r\n\r\n").unwrap();
+        defmt::info!("PASS: memset verified.");
+    }
+
+    tx.blocking_write(b"=== All DMA tests complete ===\r\n").unwrap();
+
+    loop {
+        cortex_m::asm::wfe();
+    }
+}
diff --git a/examples/mcxa/src/bin/dma_memset.rs b/examples/mcxa/src/bin/dma_memset.rs
new file mode 100644
index 000000000..95e365e47
--- /dev/null
+++ b/examples/mcxa/src/bin/dma_memset.rs
@@ -0,0 +1,218 @@
+//! DMA memset example for MCXA276.
+//!
+//! This example demonstrates using DMA to fill a buffer with a repeated pattern.
+//! The source address stays fixed while the destination increments.
+//!
+//! # Embassy-style features demonstrated:
+//! - `DmaChannel::is_done()` and `clear_done()` helper methods
+//! - No need to pass register block around
+
+#![no_std]
+#![no_main]
+
+use embassy_executor::Spawner;
+use embassy_mcxa::clocks::config::Div8;
+use embassy_mcxa::dma::{DmaCh0InterruptHandler, DmaChannel};
+use embassy_mcxa::lpuart::{Blocking, Config, Lpuart, LpuartTx};
+use embassy_mcxa::{bind_interrupts, pac};
+use {defmt_rtt as _, embassy_mcxa as hal, panic_probe as _};
+
+// Bind DMA channel 0 interrupt using Embassy-style macro
+bind_interrupts!(struct Irqs {
+    DMA_CH0 => DmaCh0InterruptHandler;
+});
+
+const BUFFER_LENGTH: usize = 4;
+
+// Buffers in RAM
+static mut PATTERN: u32 = 0;
+static mut DEST_BUFFER: [u32; BUFFER_LENGTH] = [0; BUFFER_LENGTH];
+
+/// Helper to write a u32 as decimal ASCII to UART
+fn write_u32(tx: &mut LpuartTx<'_, Blocking>, val: u32) {
+    let mut buf = [0u8; 10];
+    let mut n = val;
+    let mut i = buf.len();
+
+    if n == 0 {
+        tx.blocking_write(b"0").ok();
+        return;
+    }
+
+    while n > 0 {
+        i -= 1;
+        buf[i] = b'0' + (n % 10) as u8;
+        n /= 10;
+    }
+
+    tx.blocking_write(&buf[i..]).ok();
+}
+
+/// Helper to print a buffer to UART
+fn print_buffer(tx: &mut LpuartTx<'_, Blocking>, buf_ptr: *const u32, len: usize) {
+    tx.blocking_write(b"[").ok();
+    unsafe {
+        for i in 0..len {
+            write_u32(tx, *buf_ptr.add(i));
+            if i < len - 1 {
+                tx.blocking_write(b", ").ok();
+            }
+        }
+    }
+    tx.blocking_write(b"]").ok();
+}
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    // Small delay to allow probe-rs to attach after reset
+    for _ in 0..100_000 {
+        cortex_m::asm::nop();
+    }
+
+    let mut cfg = hal::config::Config::default();
+    cfg.clock_cfg.sirc.fro_12m_enabled = true;
+    cfg.clock_cfg.sirc.fro_lf_div = Some(Div8::no_div());
+    let p = hal::init(cfg);
+
+    defmt::info!("DMA memset example starting...");
+
+    // Enable DMA interrupt (DMA clock/reset/init is handled automatically by HAL)
+    unsafe {
+        cortex_m::peripheral::NVIC::unmask(pac::Interrupt::DMA_CH0);
+    }
+
+    let config = Config {
+        baudrate_bps: 115_200,
+        ..Default::default()
+    };
+
+    let lpuart = Lpuart::new_blocking(p.LPUART2, p.P2_2, p.P2_3, config).unwrap();
+    let (mut tx, _rx) = lpuart.split();
+
+    tx.blocking_write(b"EDMA memset example begin.\r\n\r\n").unwrap();
+
+    // Initialize buffers
+    unsafe {
+        PATTERN = 0xDEADBEEF;
+        DEST_BUFFER = [0; BUFFER_LENGTH];
+    }
+
+    tx.blocking_write(b"Pattern value:              0x").unwrap();
+    // Print pattern in hex
+    unsafe {
+        let hex_chars = b"0123456789ABCDEF";
+        let mut hex_buf = [0u8; 8];
+        let mut val = PATTERN;
+        for i in (0..8).rev() {
+            hex_buf[i] = hex_chars[(val & 0xF) as usize];
+            val >>= 4;
+        }
+        tx.blocking_write(&hex_buf).ok();
+    }
+    tx.blocking_write(b"\r\n").unwrap();
+
+    tx.blocking_write(b"Destination Buffer (before): ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(DEST_BUFFER) as *const u32, BUFFER_LENGTH);
+    tx.blocking_write(b"\r\n").unwrap();
+
+    tx.blocking_write(b"Configuring DMA with Embassy-style API...\r\n")
+        .unwrap();
+
+    // Create DMA channel using Embassy-style API
+    let dma_ch0 = DmaChannel::new(p.DMA_CH0);
+
+    // Configure memset transfer using direct TCD access:
+    // Source stays fixed (soff = 0, reads same pattern repeatedly)
+    // Destination increments (doff = 4)
+    unsafe {
+        let t = dma_ch0.tcd();
+
+        // Reset channel state
+        t.ch_csr().write(|w| {
+            w.erq()
+                .disable()
+                .earq()
+                .disable()
+                .eei()
+                .no_error()
+                .ebw()
+                .disable()
+                .done()
+                .clear_bit_by_one()
+        });
+        t.ch_es().write(|w| w.bits(0));
+        t.ch_int().write(|w| w.int().clear_bit_by_one());
+
+        // Source address (pattern) - fixed
+        t.tcd_saddr()
+            .write(|w| w.saddr().bits(core::ptr::addr_of_mut!(PATTERN) as u32));
+        // Destination address - increments
+        t.tcd_daddr()
+            .write(|w| w.daddr().bits(core::ptr::addr_of_mut!(DEST_BUFFER) as u32));
+
+        // Source offset = 0 (stays fixed), Dest offset = 4 (increments)
+        t.tcd_soff().write(|w| w.soff().bits(0));
+        t.tcd_doff().write(|w| w.doff().bits(4));
+
+        // Attributes: 32-bit transfers (size = 2)
+        t.tcd_attr().write(|w| w.ssize().bits(2).dsize().bits(2));
+
+        // Transfer entire buffer in one minor loop
+        let nbytes = (BUFFER_LENGTH * 4) as u32;
+        t.tcd_nbytes_mloffno().write(|w| w.nbytes().bits(nbytes));
+
+        // Source doesn't need adjustment (stays fixed)
+        t.tcd_slast_sda().write(|w| w.slast_sda().bits(0));
+        // Reset dest address after major loop
+        t.tcd_dlast_sga().write(|w| w.dlast_sga().bits(-(nbytes as i32) as u32));
+
+        // Major loop count = 1
+        t.tcd_biter_elinkno().write(|w| w.biter().bits(1));
+        t.tcd_citer_elinkno().write(|w| w.citer().bits(1));
+
+        // Enable interrupt on major loop completion
+        t.tcd_csr().write(|w| w.intmajor().set_bit());
+
+        cortex_m::asm::dsb();
+
+        tx.blocking_write(b"Triggering transfer...\r\n").unwrap();
+        dma_ch0.trigger_start();
+    }
+
+    // Wait for completion using channel helper method
+    while !dma_ch0.is_done() {
+        cortex_m::asm::nop();
+    }
+    unsafe {
+        dma_ch0.clear_done();
+    }
+
+    tx.blocking_write(b"\r\nEDMA memset example finish.\r\n\r\n").unwrap();
+    tx.blocking_write(b"Destination Buffer (after):  ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(DEST_BUFFER) as *const u32, BUFFER_LENGTH);
+    tx.blocking_write(b"\r\n\r\n").unwrap();
+
+    // Verify: All elements should equal PATTERN
+    let mut mismatch = false;
+    unsafe {
+        #[allow(clippy::needless_range_loop)]
+        for i in 0..BUFFER_LENGTH {
+            if DEST_BUFFER[i] != PATTERN {
+                mismatch = true;
+                break;
+            }
+        }
+    }
+
+    if mismatch {
+        tx.blocking_write(b"FAIL: Mismatch detected!\r\n").unwrap();
+        defmt::error!("FAIL: Mismatch detected!");
+    } else {
+        tx.blocking_write(b"PASS: Data verified.\r\n").unwrap();
+        defmt::info!("PASS: Data verified.");
+    }
+
+    loop {
+        cortex_m::asm::wfe();
+    }
+}
diff --git a/examples/mcxa/src/bin/dma_ping_pong_transfer.rs b/examples/mcxa/src/bin/dma_ping_pong_transfer.rs
new file mode 100644
index 000000000..f8f543382
--- /dev/null
+++ b/examples/mcxa/src/bin/dma_ping_pong_transfer.rs
@@ -0,0 +1,376 @@
+//! DMA ping-pong/double-buffer transfer example for MCXA276.
+//!
+//! This example demonstrates two approaches for ping-pong/double-buffering:
+//!
+//! ## Approach 1: Scatter/Gather with linked TCDs (manual)
+//! - Two TCDs link to each other for alternating transfers
+//! - Uses custom handler that delegates to on_interrupt() then signals completion
+//! - Note: With ESG=1, DONE bit is cleared by hardware when next TCD loads,
+//!   so we need an AtomicBool to track completion
+//!
+//! ## Approach 2: Half-transfer interrupt with wait_half() (NEW!)
+//! - Single continuous transfer over entire buffer
+//! - Uses half-transfer interrupt to know when first half is ready
+//! - Application can process first half while second half is being filled
+//!
+//! # Embassy-style features demonstrated:
+//! - `DmaChannel::new()` for channel creation
+//! - Scatter/gather with linked TCDs
+//! - Custom handler that delegates to HAL's `on_interrupt()` (best practice)
+//! - Standard `DmaCh1InterruptHandler` with `bind_interrupts!` macro
+//! - NEW: `wait_half()` for half-transfer interrupt handling
+
+#![no_std]
+#![no_main]
+
+use core::sync::atomic::{AtomicBool, Ordering};
+
+use embassy_executor::Spawner;
+use embassy_mcxa::clocks::config::Div8;
+use embassy_mcxa::dma::{self, DmaCh1InterruptHandler, DmaChannel, Tcd, TransferOptions};
+use embassy_mcxa::lpuart::{Blocking, Config, Lpuart, LpuartTx};
+use embassy_mcxa::{bind_interrupts, pac};
+use {defmt_rtt as _, embassy_mcxa as hal, panic_probe as _};
+
+// Source and destination buffers for Approach 1 (scatter/gather)
+static mut SRC: [u32; 8] = [1, 2, 3, 4, 5, 6, 7, 8];
+static mut DST: [u32; 8] = [0; 8];
+
+// Source and destination buffers for Approach 2 (wait_half)
+static mut SRC2: [u32; 8] = [0xA1, 0xA2, 0xA3, 0xA4, 0xB1, 0xB2, 0xB3, 0xB4];
+static mut DST2: [u32; 8] = [0; 8];
+
+// TCD pool for scatter/gather - must be 32-byte aligned
+#[repr(C, align(32))]
+struct TcdPool([Tcd; 2]);
+
+static mut TCD_POOL: TcdPool = TcdPool(
+    [Tcd {
+        saddr: 0,
+        soff: 0,
+        attr: 0,
+        nbytes: 0,
+        slast: 0,
+        daddr: 0,
+        doff: 0,
+        citer: 0,
+        dlast_sga: 0,
+        csr: 0,
+        biter: 0,
+    }; 2],
+);
+
+// AtomicBool to track scatter/gather completion
+// Note: With ESG=1, DONE bit is cleared by hardware when next TCD loads,
+// so we need this flag to detect when each transfer completes
+static TRANSFER_DONE: AtomicBool = AtomicBool::new(false);
+
+// Custom handler for scatter/gather that delegates to HAL's on_interrupt()
+// This follows the "interrupts as threads" pattern - the handler does minimal work
+// (delegates to HAL + sets a flag) and the main task does the actual processing
+pub struct PingPongDmaHandler;
+
+impl embassy_mcxa::interrupt::typelevel::Handler<embassy_mcxa::interrupt::typelevel::DMA_CH0> for PingPongDmaHandler {
+    unsafe fn on_interrupt() {
+        // Delegate to HAL's on_interrupt() which clears INT flag and wakes wakers
+        dma::on_interrupt(0);
+        // Signal completion for polling (needed because ESG clears DONE bit)
+        TRANSFER_DONE.store(true, Ordering::Release);
+    }
+}
+
+// Bind DMA channel interrupts
+// CH0: Custom handler for scatter/gather (delegates to on_interrupt + sets flag)
+// CH1: Standard handler for wait_half() demo
+bind_interrupts!(struct Irqs {
+    DMA_CH0 => PingPongDmaHandler;
+    DMA_CH1 => DmaCh1InterruptHandler;
+});
+
+/// Helper to write a u32 as decimal ASCII to UART
+fn write_u32(tx: &mut LpuartTx<'_, Blocking>, val: u32) {
+    let mut buf = [0u8; 10];
+    let mut n = val;
+    let mut i = buf.len();
+
+    if n == 0 {
+        tx.blocking_write(b"0").ok();
+        return;
+    }
+
+    while n > 0 {
+        i -= 1;
+        buf[i] = b'0' + (n % 10) as u8;
+        n /= 10;
+    }
+
+    tx.blocking_write(&buf[i..]).ok();
+}
+
+/// Helper to print a buffer to UART
+fn print_buffer(tx: &mut LpuartTx<'_, Blocking>, buf_ptr: *const u32, len: usize) {
+    tx.blocking_write(b"[").ok();
+    unsafe {
+        for i in 0..len {
+            write_u32(tx, *buf_ptr.add(i));
+            if i < len - 1 {
+                tx.blocking_write(b", ").ok();
+            }
+        }
+    }
+    tx.blocking_write(b"]").ok();
+}
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    // Small delay to allow probe-rs to attach after reset
+    for _ in 0..100_000 {
+        cortex_m::asm::nop();
+    }
+
+    let mut cfg = hal::config::Config::default();
+    cfg.clock_cfg.sirc.fro_12m_enabled = true;
+    cfg.clock_cfg.sirc.fro_lf_div = Some(Div8::no_div());
+    let p = hal::init(cfg);
+
+    defmt::info!("DMA ping-pong transfer example starting...");
+
+    // Enable DMA interrupt (DMA clock/reset/init is handled automatically by HAL)
+    unsafe {
+        cortex_m::peripheral::NVIC::unmask(pac::Interrupt::DMA_CH0);
+    }
+
+    let config = Config {
+        baudrate_bps: 115_200,
+        ..Default::default()
+    };
+
+    let lpuart = Lpuart::new_blocking(p.LPUART2, p.P2_2, p.P2_3, config).unwrap();
+    let (mut tx, _rx) = lpuart.split();
+
+    tx.blocking_write(b"EDMA ping-pong transfer example begin.\r\n\r\n")
+        .unwrap();
+
+    // Initialize buffers
+    unsafe {
+        SRC = [1, 2, 3, 4, 5, 6, 7, 8];
+        DST = [0; 8];
+    }
+
+    tx.blocking_write(b"Source Buffer:              ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(SRC) as *const u32, 8);
+    tx.blocking_write(b"\r\n").unwrap();
+
+    tx.blocking_write(b"Destination Buffer (before): ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(DST) as *const u32, 8);
+    tx.blocking_write(b"\r\n").unwrap();
+
+    tx.blocking_write(b"Configuring ping-pong DMA with Embassy-style API...\r\n")
+        .unwrap();
+
+    let dma_ch0 = DmaChannel::new(p.DMA_CH0);
+
+    // Configure ping-pong transfer using direct TCD access:
+    // This sets up TCD0 and TCD1 in RAM, and loads TCD0 into the channel.
+    // TCD0 transfers first half (SRC[0..4] -> DST[0..4]), links to TCD1.
+    // TCD1 transfers second half (SRC[4..8] -> DST[4..8]), links to TCD0.
+    unsafe {
+        let tcds = &mut *core::ptr::addr_of_mut!(TCD_POOL.0);
+        let src_ptr = core::ptr::addr_of!(SRC) as *const u32;
+        let dst_ptr = core::ptr::addr_of_mut!(DST) as *mut u32;
+
+        let half_len = 4usize;
+        let half_bytes = (half_len * 4) as u32;
+
+        let tcd0_addr = &tcds[0] as *const _ as u32;
+        let tcd1_addr = &tcds[1] as *const _ as u32;
+
+        // TCD0: First half -> Links to TCD1
+        tcds[0] = Tcd {
+            saddr: src_ptr as u32,
+            soff: 4,
+            attr: 0x0202, // 32-bit src/dst
+            nbytes: half_bytes,
+            slast: 0,
+            daddr: dst_ptr as u32,
+            doff: 4,
+            citer: 1,
+            dlast_sga: tcd1_addr as i32,
+            csr: 0x0012, // ESG | INTMAJOR
+            biter: 1,
+        };
+
+        // TCD1: Second half -> Links to TCD0
+        tcds[1] = Tcd {
+            saddr: src_ptr.add(half_len) as u32,
+            soff: 4,
+            attr: 0x0202,
+            nbytes: half_bytes,
+            slast: 0,
+            daddr: dst_ptr.add(half_len) as u32,
+            doff: 4,
+            citer: 1,
+            dlast_sga: tcd0_addr as i32,
+            csr: 0x0012,
+            biter: 1,
+        };
+
+        // Load TCD0 into hardware registers
+        dma_ch0.load_tcd(&tcds[0]);
+    }
+
+    tx.blocking_write(b"Triggering first half transfer...\r\n").unwrap();
+
+    // Trigger first transfer (first half: SRC[0..4] -> DST[0..4])
+    unsafe {
+        dma_ch0.trigger_start();
+    }
+
+    // Wait for first half
+    while !TRANSFER_DONE.load(Ordering::Acquire) {
+        cortex_m::asm::nop();
+    }
+    TRANSFER_DONE.store(false, Ordering::Release);
+
+    tx.blocking_write(b"First half transferred.\r\n").unwrap();
+    tx.blocking_write(b"Triggering second half transfer...\r\n").unwrap();
+
+    // Trigger second transfer (second half: SRC[4..8] -> DST[4..8])
+    unsafe {
+        dma_ch0.trigger_start();
+    }
+
+    // Wait for second half
+    while !TRANSFER_DONE.load(Ordering::Acquire) {
+        cortex_m::asm::nop();
+    }
+    TRANSFER_DONE.store(false, Ordering::Release);
+
+    tx.blocking_write(b"Second half transferred.\r\n\r\n").unwrap();
+
+    tx.blocking_write(b"EDMA ping-pong transfer example finish.\r\n\r\n")
+        .unwrap();
+    tx.blocking_write(b"Destination Buffer (after):  ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(DST) as *const u32, 8);
+    tx.blocking_write(b"\r\n\r\n").unwrap();
+
+    // Verify: DST should match SRC
+    let mut mismatch = false;
+    unsafe {
+        let src_ptr = core::ptr::addr_of!(SRC) as *const u32;
+        let dst_ptr = core::ptr::addr_of!(DST) as *const u32;
+        for i in 0..8 {
+            if *src_ptr.add(i) != *dst_ptr.add(i) {
+                mismatch = true;
+                break;
+            }
+        }
+    }
+
+    if mismatch {
+        tx.blocking_write(b"FAIL: Approach 1 mismatch detected!\r\n").unwrap();
+        defmt::error!("FAIL: Approach 1 mismatch detected!");
+    } else {
+        tx.blocking_write(b"PASS: Approach 1 data verified.\r\n\r\n").unwrap();
+        defmt::info!("PASS: Approach 1 data verified.");
+    }
+
+    // =========================================================================
+    // Approach 2: Half-Transfer Interrupt with wait_half() (NEW!)
+    // =========================================================================
+    //
+    // This approach uses a single continuous DMA transfer with half-transfer
+    // interrupt enabled. The wait_half() method allows you to be notified
+    // when the first half of the buffer is complete, so you can process it
+    // while the second half is still being filled.
+    //
+    // Benefits:
+    // - Simpler setup (no TCD pool needed)
+    // - True async/await support
+    // - Good for streaming data processing
+
+    tx.blocking_write(b"--- Approach 2: wait_half() demo ---\r\n\r\n")
+        .unwrap();
+
+    // Enable DMA CH1 interrupt
+    unsafe {
+        cortex_m::peripheral::NVIC::unmask(pac::Interrupt::DMA_CH1);
+    }
+
+    // Initialize approach 2 buffers
+    unsafe {
+        SRC2 = [0xA1, 0xA2, 0xA3, 0xA4, 0xB1, 0xB2, 0xB3, 0xB4];
+        DST2 = [0; 8];
+    }
+
+    tx.blocking_write(b"SRC2: ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(SRC2) as *const u32, 8);
+    tx.blocking_write(b"\r\n").unwrap();
+
+    let dma_ch1 = DmaChannel::new(p.DMA_CH1);
+
+    // Configure transfer with half-transfer interrupt enabled
+    let mut options = TransferOptions::default();
+    options.half_transfer_interrupt = true; // Enable half-transfer interrupt
+    options.complete_transfer_interrupt = true;
+
+    tx.blocking_write(b"Starting transfer with half_transfer_interrupt...\r\n")
+        .unwrap();
+
+    unsafe {
+        let src = &*core::ptr::addr_of!(SRC2);
+        let dst = &mut *core::ptr::addr_of_mut!(DST2);
+
+        // Create the transfer
+        let mut transfer = dma_ch1.mem_to_mem(src, dst, options);
+
+        // Wait for half-transfer (first 4 elements)
+        tx.blocking_write(b"Waiting for first half...\r\n").unwrap();
+        let half_ok = transfer.wait_half().await;
+
+        if half_ok {
+            tx.blocking_write(b"Half-transfer complete! First half of DST2: ")
+                .unwrap();
+            print_buffer(&mut tx, core::ptr::addr_of!(DST2) as *const u32, 4);
+            tx.blocking_write(b"\r\n").unwrap();
+            tx.blocking_write(b"(Processing first half while second half transfers...)\r\n")
+                .unwrap();
+        }
+
+        // Wait for complete transfer
+        tx.blocking_write(b"Waiting for second half...\r\n").unwrap();
+        transfer.await;
+    }
+
+    tx.blocking_write(b"Transfer complete! Full DST2: ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(DST2) as *const u32, 8);
+    tx.blocking_write(b"\r\n\r\n").unwrap();
+
+    // Verify approach 2
+    let mut mismatch2 = false;
+    unsafe {
+        let src_ptr = core::ptr::addr_of!(SRC2) as *const u32;
+        let dst_ptr = core::ptr::addr_of!(DST2) as *const u32;
+        for i in 0..8 {
+            if *src_ptr.add(i) != *dst_ptr.add(i) {
+                mismatch2 = true;
+                break;
+            }
+        }
+    }
+
+    if mismatch2 {
+        tx.blocking_write(b"FAIL: Approach 2 mismatch!\r\n").unwrap();
+        defmt::error!("FAIL: Approach 2 mismatch!");
+    } else {
+        tx.blocking_write(b"PASS: Approach 2 verified.\r\n").unwrap();
+        defmt::info!("PASS: Approach 2 verified.");
+    }
+
+    tx.blocking_write(b"\r\n=== All ping-pong demos complete ===\r\n")
+        .unwrap();
+
+    loop {
+        cortex_m::asm::wfe();
+    }
+}
diff --git a/examples/mcxa/src/bin/dma_scatter_gather.rs b/examples/mcxa/src/bin/dma_scatter_gather.rs
new file mode 100644
index 000000000..4b26bc2ed
--- /dev/null
+++ b/examples/mcxa/src/bin/dma_scatter_gather.rs
@@ -0,0 +1,262 @@
+//! DMA scatter-gather transfer example for MCXA276.
+//!
+//! This example demonstrates using DMA with scatter/gather to chain multiple
+//! transfer descriptors. The first TCD transfers the first half of the buffer,
+//! then automatically loads the second TCD to transfer the second half.
+//!
+//! # Embassy-style features demonstrated:
+//! - `DmaChannel::new()` for channel creation
+//! - Scatter/gather with chained TCDs
+//! - Custom handler that delegates to HAL's `on_interrupt()` (best practice)
+
+#![no_std]
+#![no_main]
+
+use core::sync::atomic::{AtomicBool, Ordering};
+
+use embassy_executor::Spawner;
+use embassy_mcxa::clocks::config::Div8;
+use embassy_mcxa::dma::{self, DmaChannel, Tcd};
+use embassy_mcxa::lpuart::{Blocking, Config, Lpuart, LpuartTx};
+use embassy_mcxa::{bind_interrupts, pac};
+use {defmt_rtt as _, embassy_mcxa as hal, panic_probe as _};
+
+// Source and destination buffers
+static mut SRC: [u32; 8] = [1, 2, 3, 4, 5, 6, 7, 8];
+static mut DST: [u32; 8] = [0; 8];
+
+// TCD pool for scatter/gather - must be 32-byte aligned
+#[repr(C, align(32))]
+struct TcdPool([Tcd; 2]);
+
+static mut TCD_POOL: TcdPool = TcdPool(
+    [Tcd {
+        saddr: 0,
+        soff: 0,
+        attr: 0,
+        nbytes: 0,
+        slast: 0,
+        daddr: 0,
+        doff: 0,
+        citer: 0,
+        dlast_sga: 0,
+        csr: 0,
+        biter: 0,
+    }; 2],
+);
+
+// AtomicBool to track scatter/gather completion
+// Note: With ESG=1, DONE bit is cleared by hardware when next TCD loads,
+// so we need this flag to detect when each transfer completes
+static TRANSFER_DONE: AtomicBool = AtomicBool::new(false);
+
+// Custom handler for scatter/gather that delegates to HAL's on_interrupt()
+// This follows the "interrupts as threads" pattern - the handler does minimal work
+// (delegates to HAL + sets a flag) and the main task does the actual processing
+pub struct ScatterGatherDmaHandler;
+
+impl embassy_mcxa::interrupt::typelevel::Handler<embassy_mcxa::interrupt::typelevel::DMA_CH0>
+    for ScatterGatherDmaHandler
+{
+    unsafe fn on_interrupt() {
+        // Delegate to HAL's on_interrupt() which clears INT flag and wakes wakers
+        dma::on_interrupt(0);
+        // Signal completion for polling (needed because ESG clears DONE bit)
+        TRANSFER_DONE.store(true, Ordering::Release);
+    }
+}
+
+// Bind DMA channel interrupt
+// Custom handler for scatter/gather (delegates to on_interrupt + sets flag)
+bind_interrupts!(struct Irqs {
+    DMA_CH0 => ScatterGatherDmaHandler;
+});
+
+/// Helper to write a u32 as decimal ASCII to UART
+fn write_u32(tx: &mut LpuartTx<'_, Blocking>, val: u32) {
+    let mut buf = [0u8; 10];
+    let mut n = val;
+    let mut i = buf.len();
+
+    if n == 0 {
+        tx.blocking_write(b"0").ok();
+        return;
+    }
+
+    while n > 0 {
+        i -= 1;
+        buf[i] = b'0' + (n % 10) as u8;
+        n /= 10;
+    }
+
+    tx.blocking_write(&buf[i..]).ok();
+}
+
+/// Helper to print a buffer to UART
+fn print_buffer(tx: &mut LpuartTx<'_, Blocking>, buf_ptr: *const u32, len: usize) {
+    tx.blocking_write(b"[").ok();
+    unsafe {
+        for i in 0..len {
+            write_u32(tx, *buf_ptr.add(i));
+            if i < len - 1 {
+                tx.blocking_write(b", ").ok();
+            }
+        }
+    }
+    tx.blocking_write(b"]").ok();
+}
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    // Small delay to allow probe-rs to attach after reset
+    for _ in 0..100_000 {
+        cortex_m::asm::nop();
+    }
+
+    let mut cfg = hal::config::Config::default();
+    cfg.clock_cfg.sirc.fro_12m_enabled = true;
+    cfg.clock_cfg.sirc.fro_lf_div = Some(Div8::no_div());
+    let p = hal::init(cfg);
+
+    defmt::info!("DMA scatter-gather transfer example starting...");
+
+    // DMA is initialized during hal::init() - no need to call ensure_init()
+
+    // Enable DMA interrupt
+    unsafe {
+        cortex_m::peripheral::NVIC::unmask(pac::Interrupt::DMA_CH0);
+    }
+
+    let config = Config {
+        baudrate_bps: 115_200,
+        ..Default::default()
+    };
+
+    let lpuart = Lpuart::new_blocking(p.LPUART2, p.P2_2, p.P2_3, config).unwrap();
+    let (mut tx, _rx) = lpuart.split();
+
+    tx.blocking_write(b"EDMA scatter-gather transfer example begin.\r\n\r\n")
+        .unwrap();
+
+    // Initialize buffers
+    unsafe {
+        SRC = [1, 2, 3, 4, 5, 6, 7, 8];
+        DST = [0; 8];
+    }
+
+    tx.blocking_write(b"Source Buffer:              ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(SRC) as *const u32, 8);
+    tx.blocking_write(b"\r\n").unwrap();
+
+    tx.blocking_write(b"Destination Buffer (before): ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(DST) as *const u32, 8);
+    tx.blocking_write(b"\r\n").unwrap();
+
+    tx.blocking_write(b"Configuring scatter-gather DMA with Embassy-style API...\r\n")
+        .unwrap();
+
+    let dma_ch0 = DmaChannel::new(p.DMA_CH0);
+
+    // Configure scatter-gather transfer using direct TCD access:
+    // This sets up TCD0 and TCD1 in RAM, and loads TCD0 into the channel.
+    // TCD0 transfers first half (SRC[0..4] -> DST[0..4]), then loads TCD1.
+    // TCD1 transfers second half (SRC[4..8] -> DST[4..8]), last TCD.
+    unsafe {
+        let tcds = core::slice::from_raw_parts_mut(core::ptr::addr_of_mut!(TCD_POOL.0) as *mut Tcd, 2);
+        let src_ptr = core::ptr::addr_of!(SRC) as *const u32;
+        let dst_ptr = core::ptr::addr_of_mut!(DST) as *mut u32;
+
+        let num_tcds = 2usize;
+        let chunk_len = 4usize; // 8 / 2
+        let chunk_bytes = (chunk_len * 4) as u32;
+
+        for i in 0..num_tcds {
+            let is_last = i == num_tcds - 1;
+            let next_tcd_addr = if is_last {
+                0 // No next TCD
+            } else {
+                &tcds[i + 1] as *const _ as u32
+            };
+
+            tcds[i] = Tcd {
+                saddr: src_ptr.add(i * chunk_len) as u32,
+                soff: 4,
+                attr: 0x0202, // 32-bit src/dst
+                nbytes: chunk_bytes,
+                slast: 0,
+                daddr: dst_ptr.add(i * chunk_len) as u32,
+                doff: 4,
+                citer: 1,
+                dlast_sga: next_tcd_addr as i32,
+                // ESG (scatter/gather) for non-last, INTMAJOR for all
+                csr: if is_last { 0x0002 } else { 0x0012 },
+                biter: 1,
+            };
+        }
+
+        // Load TCD0 into hardware registers
+        dma_ch0.load_tcd(&tcds[0]);
+    }
+
+    tx.blocking_write(b"Triggering first half transfer...\r\n").unwrap();
+
+    // Trigger first transfer (first half: SRC[0..4] -> DST[0..4])
+    // TCD0 is currently loaded.
+    unsafe {
+        dma_ch0.trigger_start();
+    }
+
+    // Wait for first half
+    while !TRANSFER_DONE.load(Ordering::Acquire) {
+        cortex_m::asm::nop();
+    }
+    TRANSFER_DONE.store(false, Ordering::Release);
+
+    tx.blocking_write(b"First half transferred.\r\n").unwrap();
+    tx.blocking_write(b"Triggering second half transfer...\r\n").unwrap();
+
+    // Trigger second transfer (second half: SRC[4..8] -> DST[4..8])
+    // TCD1 should have been loaded by the scatter/gather engine.
+    unsafe {
+        dma_ch0.trigger_start();
+    }
+
+    // Wait for second half
+    while !TRANSFER_DONE.load(Ordering::Acquire) {
+        cortex_m::asm::nop();
+    }
+    TRANSFER_DONE.store(false, Ordering::Release);
+
+    tx.blocking_write(b"Second half transferred.\r\n\r\n").unwrap();
+
+    tx.blocking_write(b"EDMA scatter-gather transfer example finish.\r\n\r\n")
+        .unwrap();
+    tx.blocking_write(b"Destination Buffer (after):  ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(DST) as *const u32, 8);
+    tx.blocking_write(b"\r\n\r\n").unwrap();
+
+    // Verify: DST should match SRC
+    let mut mismatch = false;
+    unsafe {
+        let src_ptr = core::ptr::addr_of!(SRC) as *const u32;
+        let dst_ptr = core::ptr::addr_of!(DST) as *const u32;
+        for i in 0..8 {
+            if *src_ptr.add(i) != *dst_ptr.add(i) {
+                mismatch = true;
+                break;
+            }
+        }
+    }
+
+    if mismatch {
+        tx.blocking_write(b"FAIL: Mismatch detected!\r\n").unwrap();
+        defmt::error!("FAIL: Mismatch detected!");
+    } else {
+        tx.blocking_write(b"PASS: Data verified.\r\n").unwrap();
+        defmt::info!("PASS: Data verified.");
+    }
+
+    loop {
+        cortex_m::asm::wfe();
+    }
+}
diff --git a/examples/mcxa/src/bin/dma_scatter_gather_builder.rs b/examples/mcxa/src/bin/dma_scatter_gather_builder.rs
new file mode 100644
index 000000000..e483bb81f
--- /dev/null
+++ b/examples/mcxa/src/bin/dma_scatter_gather_builder.rs
@@ -0,0 +1,231 @@
+//! DMA Scatter-Gather Builder example for MCXA276.
+//!
+//! This example demonstrates using the new `ScatterGatherBuilder` API for
+//! chaining multiple DMA transfers with a type-safe builder pattern.
+//!
+//! # Features demonstrated:
+//! - `ScatterGatherBuilder::new()` for creating a builder
+//! - `add_transfer()` for adding memory-to-memory segments
+//! - `build()` to start the chained transfer
+//! - Automatic TCD linking and ESG bit management
+//!
+//! # Comparison with manual scatter-gather:
+//! The manual approach (see `dma_scatter_gather.rs`) requires:
+//! - Manual TCD pool allocation and alignment
+//! - Manual CSR/ESG/INTMAJOR bit manipulation
+//! - Manual dlast_sga address calculations
+//!
+//! The builder approach handles all of this automatically!
+
+#![no_std]
+#![no_main]
+
+use embassy_executor::Spawner;
+use embassy_mcxa::clocks::config::Div8;
+use embassy_mcxa::dma::{DmaCh0InterruptHandler, DmaChannel, ScatterGatherBuilder};
+use embassy_mcxa::lpuart::{Blocking, Config, Lpuart, LpuartTx};
+use embassy_mcxa::{bind_interrupts, pac};
+use {defmt_rtt as _, embassy_mcxa as hal, panic_probe as _};
+
+// Bind DMA channel 0 interrupt
+bind_interrupts!(struct Irqs {
+    DMA_CH0 => DmaCh0InterruptHandler;
+});
+
+// Source buffers (multiple segments)
+static mut SRC1: [u32; 4] = [0x11111111, 0x22222222, 0x33333333, 0x44444444];
+static mut SRC2: [u32; 4] = [0xAAAAAAAA, 0xBBBBBBBB, 0xCCCCCCCC, 0xDDDDDDDD];
+static mut SRC3: [u32; 4] = [0x12345678, 0x9ABCDEF0, 0xFEDCBA98, 0x76543210];
+
+// Destination buffers (one per segment)
+static mut DST1: [u32; 4] = [0; 4];
+static mut DST2: [u32; 4] = [0; 4];
+static mut DST3: [u32; 4] = [0; 4];
+
+/// Helper to write a u32 as hex to UART
+fn write_hex(tx: &mut LpuartTx<'_, Blocking>, val: u32) {
+    const HEX: &[u8; 16] = b"0123456789ABCDEF";
+    for i in (0..8).rev() {
+        let nibble = ((val >> (i * 4)) & 0xF) as usize;
+        tx.blocking_write(&[HEX[nibble]]).ok();
+    }
+}
+
+/// Helper to print a buffer to UART
+fn print_buffer(tx: &mut LpuartTx<'_, Blocking>, buf_ptr: *const u32, len: usize) {
+    tx.blocking_write(b"[").ok();
+    unsafe {
+        for i in 0..len {
+            write_hex(tx, *buf_ptr.add(i));
+            if i < len - 1 {
+                tx.blocking_write(b", ").ok();
+            }
+        }
+    }
+    tx.blocking_write(b"]").ok();
+}
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    // Small delay to allow probe-rs to attach after reset
+    for _ in 0..100_000 {
+        cortex_m::asm::nop();
+    }
+
+    let mut cfg = hal::config::Config::default();
+    cfg.clock_cfg.sirc.fro_12m_enabled = true;
+    cfg.clock_cfg.sirc.fro_lf_div = Some(Div8::no_div());
+    let p = hal::init(cfg);
+
+    defmt::info!("DMA Scatter-Gather Builder example starting...");
+
+    // Enable DMA interrupt (DMA clock/reset/init is handled automatically by HAL)
+    unsafe {
+        cortex_m::peripheral::NVIC::unmask(pac::Interrupt::DMA_CH0);
+    }
+
+    // Create UART for debug output
+    let config = Config {
+        baudrate_bps: 115_200,
+        ..Default::default()
+    };
+
+    let lpuart = Lpuart::new_blocking(p.LPUART2, p.P2_2, p.P2_3, config).unwrap();
+    let (mut tx, _rx) = lpuart.split();
+
+    tx.blocking_write(b"DMA Scatter-Gather Builder Example\r\n").unwrap();
+    tx.blocking_write(b"===================================\r\n\r\n")
+        .unwrap();
+
+    // Show source buffers
+    tx.blocking_write(b"Source buffers:\r\n").unwrap();
+    tx.blocking_write(b"  SRC1: ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(SRC1) as *const u32, 4);
+    tx.blocking_write(b"\r\n").unwrap();
+    tx.blocking_write(b"  SRC2: ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(SRC2) as *const u32, 4);
+    tx.blocking_write(b"\r\n").unwrap();
+    tx.blocking_write(b"  SRC3: ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(SRC3) as *const u32, 4);
+    tx.blocking_write(b"\r\n\r\n").unwrap();
+
+    tx.blocking_write(b"Destination buffers (before):\r\n").unwrap();
+    tx.blocking_write(b"  DST1: ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(DST1) as *const u32, 4);
+    tx.blocking_write(b"\r\n").unwrap();
+    tx.blocking_write(b"  DST2: ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(DST2) as *const u32, 4);
+    tx.blocking_write(b"\r\n").unwrap();
+    tx.blocking_write(b"  DST3: ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(DST3) as *const u32, 4);
+    tx.blocking_write(b"\r\n\r\n").unwrap();
+
+    // Create DMA channel
+    let dma_ch0 = DmaChannel::new(p.DMA_CH0);
+
+    tx.blocking_write(b"Building scatter-gather chain with builder API...\r\n")
+        .unwrap();
+
+    // =========================================================================
+    // ScatterGatherBuilder API demonstration
+    // =========================================================================
+    //
+    // The builder pattern makes scatter-gather transfers much easier:
+    // 1. Create a builder
+    // 2. Add transfer segments with add_transfer()
+    // 3. Call build() to start the entire chain
+    // No manual TCD manipulation required!
+
+    let mut builder = ScatterGatherBuilder::<u32>::new();
+
+    // Add three transfer segments - the builder handles TCD linking automatically
+    unsafe {
+        let src1 = &*core::ptr::addr_of!(SRC1);
+        let dst1 = &mut *core::ptr::addr_of_mut!(DST1);
+        builder.add_transfer(src1, dst1);
+    }
+
+    unsafe {
+        let src2 = &*core::ptr::addr_of!(SRC2);
+        let dst2 = &mut *core::ptr::addr_of_mut!(DST2);
+        builder.add_transfer(src2, dst2);
+    }
+
+    unsafe {
+        let src3 = &*core::ptr::addr_of!(SRC3);
+        let dst3 = &mut *core::ptr::addr_of_mut!(DST3);
+        builder.add_transfer(src3, dst3);
+    }
+
+    tx.blocking_write(b"Added 3 transfer segments to chain.\r\n").unwrap();
+    tx.blocking_write(b"Starting scatter-gather transfer with .await...\r\n\r\n")
+        .unwrap();
+
+    // Build and execute the scatter-gather chain
+    // The build() method:
+    // - Links all TCDs together with ESG bit
+    // - Sets INTMAJOR on all TCDs
+    // - Loads the first TCD into hardware
+    // - Returns a Transfer future
+    unsafe {
+        let transfer = builder.build(&dma_ch0).expect("Failed to build scatter-gather");
+        transfer.blocking_wait();
+    }
+
+    tx.blocking_write(b"Scatter-gather transfer complete!\r\n\r\n").unwrap();
+
+    // Show results
+    tx.blocking_write(b"Destination buffers (after):\r\n").unwrap();
+    tx.blocking_write(b"  DST1: ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(DST1) as *const u32, 4);
+    tx.blocking_write(b"\r\n").unwrap();
+    tx.blocking_write(b"  DST2: ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(DST2) as *const u32, 4);
+    tx.blocking_write(b"\r\n").unwrap();
+    tx.blocking_write(b"  DST3: ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(DST3) as *const u32, 4);
+    tx.blocking_write(b"\r\n\r\n").unwrap();
+
+    // Verify all three segments
+    let mut all_ok = true;
+    unsafe {
+        let src1 = core::ptr::addr_of!(SRC1) as *const u32;
+        let dst1 = core::ptr::addr_of!(DST1) as *const u32;
+        for i in 0..4 {
+            if *src1.add(i) != *dst1.add(i) {
+                all_ok = false;
+            }
+        }
+
+        let src2 = core::ptr::addr_of!(SRC2) as *const u32;
+        let dst2 = core::ptr::addr_of!(DST2) as *const u32;
+        for i in 0..4 {
+            if *src2.add(i) != *dst2.add(i) {
+                all_ok = false;
+            }
+        }
+
+        let src3 = core::ptr::addr_of!(SRC3) as *const u32;
+        let dst3 = core::ptr::addr_of!(DST3) as *const u32;
+        for i in 0..4 {
+            if *src3.add(i) != *dst3.add(i) {
+                all_ok = false;
+            }
+        }
+    }
+
+    if all_ok {
+        tx.blocking_write(b"PASS: All segments verified!\r\n").unwrap();
+        defmt::info!("PASS: All segments verified!");
+    } else {
+        tx.blocking_write(b"FAIL: Mismatch detected!\r\n").unwrap();
+        defmt::error!("FAIL: Mismatch detected!");
+    }
+
+    tx.blocking_write(b"\r\n=== Scatter-Gather Builder example complete ===\r\n")
+        .unwrap();
+
+    loop {
+        cortex_m::asm::wfe();
+    }
+}
diff --git a/examples/mcxa/src/bin/dma_wrap_transfer.rs b/examples/mcxa/src/bin/dma_wrap_transfer.rs
new file mode 100644
index 000000000..82936d9d0
--- /dev/null
+++ b/examples/mcxa/src/bin/dma_wrap_transfer.rs
@@ -0,0 +1,222 @@
+//! DMA wrap transfer example for MCXA276.
+//!
+//! This example demonstrates using DMA with modulo addressing to wrap around
+//! a source buffer, effectively repeating the source data in the destination.
+//!
+//! # Embassy-style features demonstrated:
+//! - `DmaChannel::is_done()` and `clear_done()` helper methods
+//! - No need to pass register block around
+
+#![no_std]
+#![no_main]
+
+use embassy_executor::Spawner;
+use embassy_mcxa::clocks::config::Div8;
+use embassy_mcxa::dma::{DmaCh0InterruptHandler, DmaChannel};
+use embassy_mcxa::lpuart::{Blocking, Config, Lpuart, LpuartTx};
+use embassy_mcxa::{bind_interrupts, pac};
+use {defmt_rtt as _, embassy_mcxa as hal, panic_probe as _};
+
+// Bind DMA channel 0 interrupt using Embassy-style macro
+bind_interrupts!(struct Irqs {
+    DMA_CH0 => DmaCh0InterruptHandler;
+});
+
+// Source buffer: 4 words (16 bytes), aligned to 16 bytes for modulo
+#[repr(align(16))]
+struct AlignedSrc([u32; 4]);
+
+static mut SRC: AlignedSrc = AlignedSrc([0; 4]);
+static mut DST: [u32; 8] = [0; 8];
+
+/// Helper to write a u32 as decimal ASCII to UART
+fn write_u32(tx: &mut LpuartTx<'_, Blocking>, val: u32) {
+    let mut buf = [0u8; 10];
+    let mut n = val;
+    let mut i = buf.len();
+
+    if n == 0 {
+        tx.blocking_write(b"0").ok();
+        return;
+    }
+
+    while n > 0 {
+        i -= 1;
+        buf[i] = b'0' + (n % 10) as u8;
+        n /= 10;
+    }
+
+    tx.blocking_write(&buf[i..]).ok();
+}
+
+/// Helper to print a buffer to UART
+fn print_buffer(tx: &mut LpuartTx<'_, Blocking>, buf_ptr: *const u32, len: usize) {
+    tx.blocking_write(b"[").ok();
+    unsafe {
+        for i in 0..len {
+            write_u32(tx, *buf_ptr.add(i));
+            if i < len - 1 {
+                tx.blocking_write(b", ").ok();
+            }
+        }
+    }
+    tx.blocking_write(b"]").ok();
+}
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    // Small delay to allow probe-rs to attach after reset
+    for _ in 0..100_000 {
+        cortex_m::asm::nop();
+    }
+
+    let mut cfg = hal::config::Config::default();
+    cfg.clock_cfg.sirc.fro_12m_enabled = true;
+    cfg.clock_cfg.sirc.fro_lf_div = Some(Div8::no_div());
+    let p = hal::init(cfg);
+
+    defmt::info!("DMA wrap transfer example starting...");
+
+    // Enable DMA interrupt (DMA clock/reset/init is handled automatically by HAL)
+    unsafe {
+        cortex_m::peripheral::NVIC::unmask(pac::Interrupt::DMA_CH0);
+    }
+
+    let config = Config {
+        baudrate_bps: 115_200,
+        ..Default::default()
+    };
+
+    let lpuart = Lpuart::new_blocking(p.LPUART2, p.P2_2, p.P2_3, config).unwrap();
+    let (mut tx, _rx) = lpuart.split();
+
+    tx.blocking_write(b"EDMA wrap transfer example begin.\r\n\r\n").unwrap();
+
+    // Initialize buffers
+    unsafe {
+        SRC.0 = [1, 2, 3, 4];
+        DST = [0; 8];
+    }
+
+    tx.blocking_write(b"Source Buffer:              ").unwrap();
+    print_buffer(&mut tx, unsafe { core::ptr::addr_of!(SRC.0) } as *const u32, 4);
+    tx.blocking_write(b"\r\n").unwrap();
+
+    tx.blocking_write(b"Destination Buffer (before): ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(DST) as *const u32, 8);
+    tx.blocking_write(b"\r\n").unwrap();
+
+    tx.blocking_write(b"Configuring DMA with Embassy-style API...\r\n")
+        .unwrap();
+
+    // Create DMA channel using Embassy-style API
+    let dma_ch0 = DmaChannel::new(p.DMA_CH0);
+
+    // Configure wrap transfer using direct TCD access:
+    // SRC is 16 bytes (4 * u32). We want to transfer 32 bytes (8 * u32).
+    // SRC modulo is 16 bytes (2^4 = 16) - wraps source address.
+    // DST modulo is 0 (disabled).
+    // This causes the source address to wrap around after 16 bytes,
+    // effectively repeating the source data.
+    unsafe {
+        let t = dma_ch0.tcd();
+
+        // Reset channel state
+        t.ch_csr().write(|w| {
+            w.erq()
+                .disable()
+                .earq()
+                .disable()
+                .eei()
+                .no_error()
+                .ebw()
+                .disable()
+                .done()
+                .clear_bit_by_one()
+        });
+        t.ch_es().write(|w| w.bits(0));
+        t.ch_int().write(|w| w.int().clear_bit_by_one());
+
+        // Source/destination addresses
+        t.tcd_saddr()
+            .write(|w| w.saddr().bits(core::ptr::addr_of!(SRC.0) as u32));
+        t.tcd_daddr()
+            .write(|w| w.daddr().bits(core::ptr::addr_of_mut!(DST) as u32));
+
+        // Offsets: both increment by 4 bytes
+        t.tcd_soff().write(|w| w.soff().bits(4));
+        t.tcd_doff().write(|w| w.doff().bits(4));
+
+        // Attributes: 32-bit transfers (size = 2)
+        // SMOD = 4 (2^4 = 16 byte modulo for source), DMOD = 0 (disabled)
+        t.tcd_attr().write(|w| {
+            w.ssize()
+                .bits(2)
+                .dsize()
+                .bits(2)
+                .smod()
+                .bits(4) // Source modulo: 2^4 = 16 bytes
+                .dmod()
+                .bits(0) // Dest modulo: disabled
+        });
+
+        // Transfer 32 bytes total in one minor loop
+        let nbytes = 32u32;
+        t.tcd_nbytes_mloffno().write(|w| w.nbytes().bits(nbytes));
+
+        // Source wraps via modulo, no adjustment needed
+        t.tcd_slast_sda().write(|w| w.slast_sda().bits(0));
+        // Reset dest address after major loop
+        t.tcd_dlast_sga().write(|w| w.dlast_sga().bits(-(nbytes as i32) as u32));
+
+        // Major loop count = 1
+        t.tcd_biter_elinkno().write(|w| w.biter().bits(1));
+        t.tcd_citer_elinkno().write(|w| w.citer().bits(1));
+
+        // Enable interrupt on major loop completion
+        t.tcd_csr().write(|w| w.intmajor().set_bit());
+
+        cortex_m::asm::dsb();
+
+        tx.blocking_write(b"Triggering transfer...\r\n").unwrap();
+        dma_ch0.trigger_start();
+    }
+
+    // Wait for completion using channel helper method
+    while !dma_ch0.is_done() {
+        cortex_m::asm::nop();
+    }
+    unsafe {
+        dma_ch0.clear_done();
+    }
+
+    tx.blocking_write(b"\r\nEDMA wrap transfer example finish.\r\n\r\n")
+        .unwrap();
+    tx.blocking_write(b"Destination Buffer (after):  ").unwrap();
+    print_buffer(&mut tx, core::ptr::addr_of!(DST) as *const u32, 8);
+    tx.blocking_write(b"\r\n\r\n").unwrap();
+
+    // Verify: DST should be [1, 2, 3, 4, 1, 2, 3, 4]
+    let expected = [1u32, 2, 3, 4, 1, 2, 3, 4];
+    let mut mismatch = false;
+    unsafe {
+        for i in 0..8 {
+            if DST[i] != expected[i] {
+                mismatch = true;
+                break;
+            }
+        }
+    }
+
+    if mismatch {
+        tx.blocking_write(b"FAIL: Mismatch detected!\r\n").unwrap();
+        defmt::error!("FAIL: Mismatch detected!");
+    } else {
+        tx.blocking_write(b"PASS: Data verified.\r\n").unwrap();
+        defmt::info!("PASS: Data verified.");
+    }
+
+    loop {
+        cortex_m::asm::wfe();
+    }
+}
diff --git a/examples/mcxa/src/bin/hello.rs b/examples/mcxa/src/bin/hello.rs
new file mode 100644
index 000000000..e371d9413
--- /dev/null
+++ b/examples/mcxa/src/bin/hello.rs
@@ -0,0 +1,119 @@
+#![no_std]
+#![no_main]
+
+use embassy_executor::Spawner;
+use embassy_mcxa::clocks::config::Div8;
+use hal::lpuart::{Blocking, Config, Lpuart};
+use {defmt_rtt as _, embassy_mcxa as hal, panic_probe as _};
+
+/// Simple helper to write a byte as hex to UART
+fn write_hex_byte(uart: &mut Lpuart<'_, Blocking>, byte: u8) {
+    const HEX_DIGITS: &[u8] = b"0123456789ABCDEF";
+    let _ = uart.write_byte(HEX_DIGITS[(byte >> 4) as usize]);
+    let _ = uart.write_byte(HEX_DIGITS[(byte & 0xF) as usize]);
+}
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let mut cfg = hal::config::Config::default();
+    cfg.clock_cfg.sirc.fro_12m_enabled = true;
+    cfg.clock_cfg.sirc.fro_lf_div = Some(Div8::no_div());
+    let p = hal::init(cfg);
+
+    defmt::info!("boot");
+
+    // Create UART configuration
+    let config = Config {
+        baudrate_bps: 115_200,
+        ..Default::default()
+    };
+
+    // Create UART instance using LPUART2 with P2_2 as TX and P2_3 as RX
+    let mut uart = Lpuart::new_blocking(
+        p.LPUART2, // Peripheral
+        p.P2_2,    // TX pin
+        p.P2_3,    // RX pin
+        config,
+    )
+    .unwrap();
+
+    // Print welcome message before any async delays to guarantee early console output
+    uart.write_str_blocking("\r\n=== MCXA276 UART Echo Demo ===\r\n");
+    uart.write_str_blocking("Available commands:\r\n");
+    uart.write_str_blocking("  help     - Show this help\r\n");
+    uart.write_str_blocking("  echo <text> - Echo back the text\r\n");
+    uart.write_str_blocking("  hex <byte> - Display byte in hex (0-255)\r\n");
+    uart.write_str_blocking("Type a command: ");
+
+    let mut buffer = [0u8; 64];
+    let mut buf_idx = 0;
+
+    loop {
+        // Read a byte from UART
+        let byte = uart.read_byte_blocking();
+
+        // Echo the character back
+        if byte == b'\r' || byte == b'\n' {
+            // Enter pressed - process command
+            uart.write_str_blocking("\r\n");
+
+            if buf_idx > 0 {
+                let command = &buffer[0..buf_idx];
+
+                if command == b"help" {
+                    uart.write_str_blocking("Available commands:\r\n");
+                    uart.write_str_blocking("  help     - Show this help\r\n");
+                    uart.write_str_blocking("  echo <text> - Echo back the text\r\n");
+                    uart.write_str_blocking("  hex <byte> - Display byte in hex (0-255)\r\n");
+                } else if command.starts_with(b"echo ") && command.len() > 5 {
+                    uart.write_str_blocking("Echo: ");
+                    uart.write_str_blocking(core::str::from_utf8(&command[5..]).unwrap_or(""));
+                    uart.write_str_blocking("\r\n");
+                } else if command.starts_with(b"hex ") && command.len() > 4 {
+                    // Parse the byte value
+                    let num_str = &command[4..];
+                    if let Ok(num) = parse_u8(num_str) {
+                        uart.write_str_blocking("Hex: 0x");
+                        write_hex_byte(&mut uart, num);
+                        uart.write_str_blocking("\r\n");
+                    } else {
+                        uart.write_str_blocking("Invalid number for hex command\r\n");
+                    }
+                } else if !command.is_empty() {
+                    uart.write_str_blocking("Unknown command: ");
+                    uart.write_str_blocking(core::str::from_utf8(command).unwrap_or(""));
+                    uart.write_str_blocking("\r\n");
+                }
+            }
+
+            // Reset buffer and prompt
+            buf_idx = 0;
+            uart.write_str_blocking("Type a command: ");
+        } else if byte == 8 || byte == 127 {
+            // Backspace
+            if buf_idx > 0 {
+                buf_idx -= 1;
+                uart.write_str_blocking("\x08 \x08"); // Erase character
+            }
+        } else if buf_idx < buffer.len() - 1 {
+            // Regular character
+            buffer[buf_idx] = byte;
+            buf_idx += 1;
+            let _ = uart.write_byte(byte);
+        }
+    }
+}
+
+/// Simple parser for u8 from ASCII bytes
+fn parse_u8(bytes: &[u8]) -> Result<u8, ()> {
+    let mut result = 0u8;
+    for &b in bytes {
+        if b.is_ascii_digit() {
+            result = result.checked_mul(10).ok_or(())?;
+            result = result.checked_add(b - b'0').ok_or(())?;
+        } else {
+            return Err(());
+        }
+    }
+    Ok(result)
+}
diff --git a/examples/mcxa/src/bin/i2c-blocking.rs b/examples/mcxa/src/bin/i2c-blocking.rs
new file mode 100644
index 000000000..0f6c8cbae
--- /dev/null
+++ b/examples/mcxa/src/bin/i2c-blocking.rs
@@ -0,0 +1,31 @@
+#![no_std]
+#![no_main]
+
+use embassy_executor::Spawner;
+use embassy_time::Timer;
+use hal::clocks::config::Div8;
+use hal::config::Config;
+use hal::i2c::controller::{self, I2c, Speed};
+use tmp108::Tmp108;
+use {defmt_rtt as _, embassy_mcxa as hal, panic_probe as _};
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let mut config = Config::default();
+    config.clock_cfg.sirc.fro_lf_div = Div8::from_divisor(1);
+
+    let p = hal::init(config);
+
+    defmt::info!("I2C example");
+
+    let mut config = controller::Config::default();
+    config.speed = Speed::Standard;
+    let i2c = I2c::new_blocking(p.LPI2C3, p.P3_27, p.P3_28, config).unwrap();
+    let mut tmp = Tmp108::new_with_a0_gnd(i2c);
+
+    loop {
+        let temperature = tmp.temperature().unwrap();
+        defmt::info!("Temperature: {}C", temperature);
+        Timer::after_secs(1).await;
+    }
+}
diff --git a/examples/mcxa/src/bin/i2c-scan-blocking.rs b/examples/mcxa/src/bin/i2c-scan-blocking.rs
new file mode 100644
index 000000000..4e203597b
--- /dev/null
+++ b/examples/mcxa/src/bin/i2c-scan-blocking.rs
@@ -0,0 +1,41 @@
+#![no_std]
+#![no_main]
+
+use embassy_executor::Spawner;
+use embassy_mcxa::gpio::Pull;
+use embassy_mcxa::Input;
+use embassy_time::Timer;
+use hal::clocks::config::Div8;
+use hal::config::Config;
+use hal::i2c::controller::{self, I2c, Speed};
+use {defmt_rtt as _, embassy_mcxa as hal, panic_probe as _};
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let mut config = Config::default();
+    config.clock_cfg.sirc.fro_lf_div = Div8::from_divisor(1);
+
+    let p = hal::init(config);
+
+    defmt::info!("I2C example");
+
+    let mut config = controller::Config::default();
+    config.speed = Speed::Standard;
+
+    // Note: P0_2 is connected to P1_8 on the FRDM_MCXA276 via a resistor, and
+    // defaults to SWO on the debug peripheral. Explicitly make it a high-z
+    // input.
+    let _pin = Input::new(p.P0_2, Pull::Disabled);
+    let mut i2c = I2c::new_blocking(p.LPI2C2, p.P1_9, p.P1_8, config).unwrap();
+
+    for addr in 0x01..=0x7f {
+        let result = i2c.blocking_write(addr, &[]);
+        if result.is_ok() {
+            defmt::info!("Device found at addr {:02x}", addr);
+        }
+    }
+
+    loop {
+        Timer::after_secs(10).await;
+    }
+}
diff --git a/examples/mcxa/src/bin/lpuart_buffered.rs b/examples/mcxa/src/bin/lpuart_buffered.rs
new file mode 100644
index 000000000..420589d00
--- /dev/null
+++ b/examples/mcxa/src/bin/lpuart_buffered.rs
@@ -0,0 +1,62 @@
+#![no_std]
+#![no_main]
+
+use embassy_executor::Spawner;
+use embassy_mcxa::clocks::config::Div8;
+use embassy_mcxa::lpuart::buffered::BufferedLpuart;
+use embassy_mcxa::lpuart::Config;
+use embassy_mcxa::{bind_interrupts, lpuart};
+use embedded_io_async::Write;
+use {defmt_rtt as _, embassy_mcxa as hal, panic_probe as _};
+
+// Bind OS_EVENT for timers plus LPUART2 IRQ for the buffered driver
+bind_interrupts!(struct Irqs {
+    LPUART2 => lpuart::buffered::BufferedInterruptHandler::<hal::peripherals::LPUART2>;
+});
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let mut cfg = hal::config::Config::default();
+    cfg.clock_cfg.sirc.fro_12m_enabled = true;
+    cfg.clock_cfg.sirc.fro_lf_div = Some(Div8::no_div());
+    let p = hal::init(cfg);
+
+    // Configure NVIC for LPUART2
+    hal::interrupt::LPUART2.configure_for_uart(hal::interrupt::Priority::P3);
+
+    // UART configuration (enable both TX and RX)
+    let config = Config {
+        baudrate_bps: 115_200,
+        rx_fifo_watermark: 0,
+        tx_fifo_watermark: 0,
+        ..Default::default()
+    };
+
+    let mut tx_buf = [0u8; 256];
+    let mut rx_buf = [0u8; 256];
+
+    // Create a buffered LPUART2 instance with both TX and RX
+    let mut uart = BufferedLpuart::new(
+        p.LPUART2,
+        p.P2_2, // TX pin
+        p.P2_3, // RX pin
+        Irqs,
+        &mut tx_buf,
+        &mut rx_buf,
+        config,
+    )
+    .unwrap();
+
+    // Split into TX and RX parts
+    let (tx, rx) = uart.split_ref();
+
+    tx.write(b"Hello buffered LPUART.\r\n").await.unwrap();
+    tx.write(b"Type characters to echo them back.\r\n").await.unwrap();
+
+    // Echo loop
+    let mut buf = [0u8; 4];
+    loop {
+        let used = rx.read(&mut buf).await.unwrap();
+        tx.write_all(&buf[..used]).await.unwrap();
+    }
+}
diff --git a/examples/mcxa/src/bin/lpuart_dma.rs b/examples/mcxa/src/bin/lpuart_dma.rs
new file mode 100644
index 000000000..5497f8646
--- /dev/null
+++ b/examples/mcxa/src/bin/lpuart_dma.rs
@@ -0,0 +1,81 @@
+//! LPUART DMA example for MCXA276.
+//!
+//! This example demonstrates using DMA for UART TX and RX operations.
+//! It sends a message using DMA, then waits for 16 characters to be received
+//! via DMA and echoes them back.
+//!
+//! The DMA request sources are automatically derived from the LPUART instance type.
+//! DMA clock/reset/init is handled automatically by the HAL.
+
+#![no_std]
+#![no_main]
+
+use embassy_executor::Spawner;
+use embassy_mcxa::clocks::config::Div8;
+use embassy_mcxa::dma::{DmaCh0InterruptHandler, DmaCh1InterruptHandler};
+use embassy_mcxa::lpuart::{Config, LpuartDma};
+use embassy_mcxa::{bind_interrupts, pac};
+use {defmt_rtt as _, embassy_mcxa as hal, panic_probe as _};
+
+// Bind DMA channel interrupts using Embassy-style macro
+bind_interrupts!(struct Irqs {
+    DMA_CH0 => DmaCh0InterruptHandler;
+    DMA_CH1 => DmaCh1InterruptHandler;
+});
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let mut cfg = hal::config::Config::default();
+    cfg.clock_cfg.sirc.fro_12m_enabled = true;
+    cfg.clock_cfg.sirc.fro_lf_div = Some(Div8::no_div());
+    let p = hal::init(cfg);
+
+    defmt::info!("LPUART DMA example starting...");
+
+    // Enable DMA interrupts (per-channel, as needed)
+    unsafe {
+        cortex_m::peripheral::NVIC::unmask(pac::Interrupt::DMA_CH0);
+        cortex_m::peripheral::NVIC::unmask(pac::Interrupt::DMA_CH1);
+    }
+
+    // Create UART configuration
+    let config = Config {
+        baudrate_bps: 115_200,
+        ..Default::default()
+    };
+
+    // Create UART instance with DMA channels
+    let mut lpuart = LpuartDma::new(
+        p.LPUART2, p.P2_2,    // TX pin
+        p.P2_3,    // RX pin
+        p.DMA_CH0, // TX DMA channel
+        p.DMA_CH1, // RX DMA channel
+        config,
+    )
+    .unwrap();
+
+    // Send a message using DMA (DMA request source is automatically derived from LPUART2)
+    let tx_msg = b"Hello from LPUART2 DMA TX!\r\n";
+    lpuart.write_dma(tx_msg).await.unwrap();
+
+    defmt::info!("TX DMA complete");
+
+    // Send prompt
+    let prompt = b"Type 16 characters to echo via DMA:\r\n";
+    lpuart.write_dma(prompt).await.unwrap();
+
+    // Receive 16 characters using DMA
+    let mut rx_buf = [0u8; 16];
+    lpuart.read_dma(&mut rx_buf).await.unwrap();
+
+    defmt::info!("RX DMA complete");
+
+    // Echo back the received data
+    let echo_prefix = b"\r\nReceived: ";
+    lpuart.write_dma(echo_prefix).await.unwrap();
+    lpuart.write_dma(&rx_buf).await.unwrap();
+    let done_msg = b"\r\nDone!\r\n";
+    lpuart.write_dma(done_msg).await.unwrap();
+
+    defmt::info!("Example complete");
+}
diff --git a/examples/mcxa/src/bin/lpuart_polling.rs b/examples/mcxa/src/bin/lpuart_polling.rs
new file mode 100644
index 000000000..b80668834
--- /dev/null
+++ b/examples/mcxa/src/bin/lpuart_polling.rs
@@ -0,0 +1,47 @@
+#![no_std]
+#![no_main]
+
+use embassy_executor::Spawner;
+use embassy_mcxa::clocks::config::Div8;
+use {defmt_rtt as _, embassy_mcxa as hal, panic_probe as _};
+
+use crate::hal::lpuart::{Config, Lpuart};
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let mut cfg = hal::config::Config::default();
+    cfg.clock_cfg.sirc.fro_12m_enabled = true;
+    cfg.clock_cfg.sirc.fro_lf_div = Some(Div8::no_div());
+    let p = hal::init(cfg);
+
+    defmt::info!("boot");
+
+    // Create UART configuration
+    let config = Config {
+        baudrate_bps: 115_200,
+        ..Default::default()
+    };
+
+    // Create UART instance using LPUART2 with P2_2 as TX and P2_3 as RX
+    let lpuart = Lpuart::new_blocking(
+        p.LPUART2, // Peripheral
+        p.P2_2,    // TX pin
+        p.P2_3,    // RX pin
+        config,
+    )
+    .unwrap();
+
+    // Split into separate TX and RX parts
+    let (mut tx, mut rx) = lpuart.split();
+
+    // Write hello messages
+    tx.blocking_write(b"Hello world.\r\n").unwrap();
+    tx.blocking_write(b"Echoing. Type characters...\r\n").unwrap();
+
+    // Echo loop
+    loop {
+        let mut buf = [0u8; 1];
+        rx.blocking_read(&mut buf).unwrap();
+        tx.blocking_write(&buf).unwrap();
+    }
+}
diff --git a/examples/mcxa/src/bin/lpuart_ring_buffer.rs b/examples/mcxa/src/bin/lpuart_ring_buffer.rs
new file mode 100644
index 000000000..1d1a51970
--- /dev/null
+++ b/examples/mcxa/src/bin/lpuart_ring_buffer.rs
@@ -0,0 +1,130 @@
+//! LPUART Ring Buffer DMA example for MCXA276.
+//!
+//! This example demonstrates using the high-level `LpuartRxDma::setup_ring_buffer()`
+//! API for continuous circular DMA reception from a UART peripheral.
+//!
+//! # Features demonstrated:
+//! - `LpuartRxDma::setup_ring_buffer()` for continuous peripheral-to-memory DMA
+//! - `RingBuffer` for async reading of received data
+//! - Handling of potential overrun conditions
+//! - Half-transfer and complete-transfer interrupts for timely wakeups
+//!
+//! # How it works:
+//! 1. Create an `LpuartRxDma` driver with a DMA channel
+//! 2. Call `setup_ring_buffer()` which handles all low-level DMA configuration
+//! 3. Application asynchronously reads data as it arrives via `ring_buf.read()`
+//! 4. Both half-transfer and complete-transfer interrupts wake the reader
+
+#![no_std]
+#![no_main]
+
+use embassy_executor::Spawner;
+use embassy_mcxa::bind_interrupts;
+use embassy_mcxa::clocks::config::Div8;
+use embassy_mcxa::dma::{DmaCh0InterruptHandler, DmaCh1InterruptHandler};
+use embassy_mcxa::lpuart::{Config, LpuartDma, LpuartTxDma};
+use {defmt_rtt as _, embassy_mcxa as hal, panic_probe as _};
+
+// Bind DMA channel interrupts
+bind_interrupts!(struct Irqs {
+    DMA_CH0 => DmaCh0InterruptHandler;
+    DMA_CH1 => DmaCh1InterruptHandler;
+});
+
+// Ring buffer for RX - power of 2 is ideal for modulo efficiency
+static mut RX_RING_BUFFER: [u8; 64] = [0; 64];
+
+/// Helper to write a byte as hex to UART
+fn write_hex<T: embassy_mcxa::lpuart::Instance, C: embassy_mcxa::dma::Channel>(
+    tx: &mut LpuartTxDma<'_, T, C>,
+    byte: u8,
+) {
+    const HEX: &[u8; 16] = b"0123456789ABCDEF";
+    let buf = [HEX[(byte >> 4) as usize], HEX[(byte & 0x0F) as usize]];
+    tx.blocking_write(&buf).ok();
+}
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    // Small delay to allow probe-rs to attach after reset
+    for _ in 0..100_000 {
+        cortex_m::asm::nop();
+    }
+
+    let mut cfg = hal::config::Config::default();
+    cfg.clock_cfg.sirc.fro_12m_enabled = true;
+    cfg.clock_cfg.sirc.fro_lf_div = Some(Div8::no_div());
+    let p = hal::init(cfg);
+
+    defmt::info!("LPUART Ring Buffer DMA example starting...");
+
+    // Create UART configuration
+    let config = Config {
+        baudrate_bps: 115_200,
+        ..Default::default()
+    };
+
+    // Create LPUART with DMA support for both TX and RX, then split
+    // This is the proper Embassy pattern - create once, split into TX and RX
+    let lpuart = LpuartDma::new(p.LPUART2, p.P2_2, p.P2_3, p.DMA_CH1, p.DMA_CH0, config).unwrap();
+    let (mut tx, rx) = lpuart.split();
+
+    tx.blocking_write(b"LPUART Ring Buffer DMA Example\r\n").unwrap();
+    tx.blocking_write(b"==============================\r\n\r\n").unwrap();
+
+    tx.blocking_write(b"Setting up circular DMA for UART RX...\r\n")
+        .unwrap();
+
+    // Set up the ring buffer with circular DMA
+    // The HAL handles: DMA request source, RDMAE enable, circular transfer config, NVIC enable
+    let ring_buf = unsafe {
+        let buf = &mut *core::ptr::addr_of_mut!(RX_RING_BUFFER);
+        rx.setup_ring_buffer(buf)
+    };
+
+    // Enable DMA requests to start continuous reception
+    unsafe {
+        rx.enable_dma_request();
+    }
+
+    tx.blocking_write(b"Ring buffer ready! Type characters to see them echoed.\r\n")
+        .unwrap();
+    tx.blocking_write(b"The DMA continuously receives in the background.\r\n\r\n")
+        .unwrap();
+
+    // Main loop: read from ring buffer and echo back
+    let mut read_buf = [0u8; 16];
+    let mut total_received: usize = 0;
+
+    loop {
+        // Async read - waits until data is available
+        match ring_buf.read(&mut read_buf).await {
+            Ok(n) if n > 0 => {
+                total_received += n;
+
+                // Echo back what we received
+                tx.blocking_write(b"RX[").unwrap();
+                for (i, &byte) in read_buf.iter().enumerate().take(n) {
+                    write_hex(&mut tx, byte);
+                    if i < n - 1 {
+                        tx.blocking_write(b" ").unwrap();
+                    }
+                }
+                tx.blocking_write(b"]: ").unwrap();
+                tx.blocking_write(&read_buf[..n]).unwrap();
+                tx.blocking_write(b"\r\n").unwrap();
+
+                defmt::info!("Received {} bytes, total: {}", n, total_received);
+            }
+            Ok(_) => {
+                // No data, shouldn't happen with async read
+            }
+            Err(_) => {
+                // Overrun detected
+                tx.blocking_write(b"ERROR: Ring buffer overrun!\r\n").unwrap();
+                defmt::error!("Ring buffer overrun!");
+                ring_buf.clear();
+            }
+        }
+    }
+}
diff --git a/examples/mcxa/src/bin/rtc_alarm.rs b/examples/mcxa/src/bin/rtc_alarm.rs
new file mode 100644
index 000000000..a7800a2d1
--- /dev/null
+++ b/examples/mcxa/src/bin/rtc_alarm.rs
@@ -0,0 +1,74 @@
+#![no_std]
+#![no_main]
+
+use embassy_executor::Spawner;
+use embassy_mcxa as hal;
+use hal::rtc::{RtcDateTime, RtcInterruptEnable};
+use hal::InterruptExt;
+
+type MyRtc = hal::rtc::Rtc<'static, hal::rtc::Rtc0>;
+
+use embassy_mcxa::bind_interrupts;
+use {defmt_rtt as _, panic_probe as _};
+
+bind_interrupts!(struct Irqs {
+    RTC => hal::rtc::RtcHandler;
+});
+
+#[used]
+#[no_mangle]
+static KEEP_RTC: unsafe extern "C" fn() = RTC;
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let p = hal::init(hal::config::Config::default());
+
+    defmt::info!("=== RTC Alarm Example ===");
+
+    let rtc_config = hal::rtc::get_default_config();
+
+    let rtc = MyRtc::new(p.RTC0, rtc_config);
+
+    let now = RtcDateTime {
+        year: 2025,
+        month: 10,
+        day: 15,
+        hour: 14,
+        minute: 30,
+        second: 0,
+    };
+
+    rtc.stop();
+
+    defmt::info!("Time set to: 2025-10-15 14:30:00");
+    rtc.set_datetime(now);
+
+    let mut alarm = now;
+    alarm.second += 10;
+
+    rtc.set_alarm(alarm);
+    defmt::info!("Alarm set for: 2025-10-15 14:30:10 (+10 seconds)");
+
+    rtc.set_interrupt(RtcInterruptEnable::RTC_ALARM_INTERRUPT_ENABLE);
+
+    unsafe {
+        hal::interrupt::RTC.enable();
+    }
+
+    unsafe {
+        cortex_m::interrupt::enable();
+    }
+
+    rtc.start();
+
+    defmt::info!("RTC started, waiting for alarm...");
+
+    loop {
+        if rtc.is_alarm_triggered() {
+            defmt::info!("*** ALARM TRIGGERED! ***");
+            break;
+        }
+    }
+
+    defmt::info!("Example complete - Test PASSED!");
+}
diff --git a/examples/mcxa/src/lib.rs b/examples/mcxa/src/lib.rs
new file mode 100644
index 000000000..2573a6adc
--- /dev/null
+++ b/examples/mcxa/src/lib.rs
@@ -0,0 +1,16 @@
+#![no_std]
+#![allow(clippy::missing_safety_doc)]
+
+//! Shared board-specific helpers for the FRDM-MCXA276 examples.
+//! These live with the examples so the HAL stays generic.
+
+use hal::{clocks, pins};
+use {defmt_rtt as _, embassy_mcxa as hal, panic_probe as _};
+
+/// Initialize clocks and pin muxing for ADC.
+pub unsafe fn init_adc_pins() {
+    // NOTE: Lpuart has been updated to properly enable + reset its own clocks.
+    // GPIO has not.
+    _ = clocks::enable_and_reset::<hal::peripherals::PORT1>(&clocks::periph_helpers::NoConfig);
+    pins::configure_adc_pins();
+}