merge new embassy changes

3 files changed, 93 insertions, 0 deletions

diff --git a/examples/mspm0l1306/src/bin/blinky.rs b/examples/mspm0l1306/src/bin/blinky.rs
new file mode 100644
index 000000000..055a5cd81
--- /dev/null
+++ b/examples/mspm0l1306/src/bin/blinky.rs
@@ -0,0 +1,25 @@
+#![no_std]
+#![no_main]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_mspm0::gpio::{Level, Output};
+use embassy_mspm0::Config;
+use embassy_time::Timer;
+use {defmt_rtt as _, panic_halt as _};
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) -> ! {
+    info!("Hello world!");
+    let p = embassy_mspm0::init(Config::default());
+
+    let mut led1 = Output::new(p.PA0, Level::Low);
+    led1.set_inversion(true);
+
+    loop {
+        Timer::after_millis(400).await;
+
+        info!("Toggle");
+        led1.toggle();
+    }
+}
diff --git a/examples/mspm0l1306/src/bin/button.rs b/examples/mspm0l1306/src/bin/button.rs
new file mode 100644
index 000000000..d8c85947f
--- /dev/null
+++ b/examples/mspm0l1306/src/bin/button.rs
@@ -0,0 +1,33 @@
+#![no_std]
+#![no_main]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_mspm0::gpio::{Input, Level, Output, Pull};
+use embassy_mspm0::Config;
+use {defmt_rtt as _, panic_halt as _};
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) -> ! {
+    info!("Hello world!");
+
+    let p = embassy_mspm0::init(Config::default());
+
+    let led1 = p.PA0;
+    let s2 = p.PA14;
+
+    let mut led1 = Output::new(led1, Level::Low);
+
+    let mut s2 = Input::new(s2, Pull::Up);
+
+    // led1 is active low
+    led1.set_high();
+
+    loop {
+        s2.wait_for_falling_edge().await;
+
+        info!("Switch 2 was pressed");
+
+        led1.toggle();
+    }
+}
diff --git a/examples/mspm0l1306/src/bin/uart.rs b/examples/mspm0l1306/src/bin/uart.rs
new file mode 100644
index 000000000..95c56fdd3
--- /dev/null
+++ b/examples/mspm0l1306/src/bin/uart.rs
@@ -0,0 +1,35 @@
+//! Example of using blocking uart
+//!
+//! This uses the virtual COM port provided on the LP-MSPM0L1306 board.
+
+#![no_std]
+#![no_main]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_mspm0::uart::{Config, Uart};
+use {defmt_rtt as _, panic_halt as _};
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) -> ! {
+    info!("Hello world!");
+
+    let p = embassy_mspm0::init(Default::default());
+
+    let instance = p.UART0;
+    let tx = p.PA8;
+    let rx = p.PA9;
+
+    let config = Config::default();
+    let mut uart = unwrap!(Uart::new_blocking(instance, rx, tx, config));
+
+    unwrap!(uart.blocking_write(b"Hello Embassy World!\r\n"));
+    info!("wrote Hello, starting echo");
+
+    let mut buf = [0u8; 1];
+
+    loop {
+        unwrap!(uart.blocking_read(&mut buf));
+        unwrap!(uart.blocking_write(&buf));
+    }
+}