add async dma read example

1 files changed, 76 insertions, 0 deletions

diff --git a/examples/stm32h7/src/bin/adc_dma.rs b/examples/stm32h7/src/bin/adc_dma.rs
new file mode 100644
index 000000000..6c0240453
--- /dev/null
+++ b/examples/stm32h7/src/bin/adc_dma.rs
@@ -0,0 +1,76 @@
+#![no_std]
+#![no_main]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_stm32::adc::{Adc, AdcChannel as _, SampleTime};
+use embassy_stm32::Config;
+use embassy_time::Timer;
+use {defmt_rtt as _, panic_probe as _};
+
+#[link_section = ".ram_d3"]
+static mut DMA_BUF: [u16; 2] = [0; 2];
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let mut read_buffer = unsafe { &mut DMA_BUF[..] };
+
+    let mut config = Config::default();
+    {
+        use embassy_stm32::rcc::*;
+        config.rcc.hsi = Some(HSIPrescaler::DIV1);
+        config.rcc.csi = true;
+        config.rcc.pll1 = Some(Pll {
+            source: PllSource::HSI,
+            prediv: PllPreDiv::DIV4,
+            mul: PllMul::MUL50,
+            divp: Some(PllDiv::DIV2),
+            divq: Some(PllDiv::DIV8), // SPI1 cksel defaults to pll1_q
+            divr: None,
+        });
+        config.rcc.pll2 = Some(Pll {
+            source: PllSource::HSI,
+            prediv: PllPreDiv::DIV4,
+            mul: PllMul::MUL50,
+            divp: Some(PllDiv::DIV8), // 100mhz
+            divq: None,
+            divr: None,
+        });
+        config.rcc.sys = Sysclk::PLL1_P; // 400 Mhz
+        config.rcc.ahb_pre = AHBPrescaler::DIV2; // 200 Mhz
+        config.rcc.apb1_pre = APBPrescaler::DIV2; // 100 Mhz
+        config.rcc.apb2_pre = APBPrescaler::DIV2; // 100 Mhz
+        config.rcc.apb3_pre = APBPrescaler::DIV2; // 100 Mhz
+        config.rcc.apb4_pre = APBPrescaler::DIV2; // 100 Mhz
+        config.rcc.voltage_scale = VoltageScale::Scale1;
+        config.rcc.mux.adcsel = mux::Adcsel::PLL2_P;
+    }
+    let p = embassy_stm32::init(config);
+
+    info!("Hello World!");
+
+    let mut adc = Adc::new(p.ADC3);
+
+    let mut dma = p.DMA1_CH1;
+    let mut vrefint_channel = adc.enable_vrefint().degrade_adc();
+    let mut pc0 = p.PC0.degrade_adc();
+
+    loop {
+        adc.read_async(
+            &mut dma,
+            [
+                (&mut vrefint_channel, SampleTime::CYCLES387_5),
+                (&mut pc0, SampleTime::CYCLES810_5),
+            ]
+            .into_iter(),
+            &mut read_buffer,
+        )
+        .await;
+
+        let vrefint = read_buffer[0];
+        let measured = read_buffer[1];
+        info!("vrefint: {}", vrefint);
+        info!("measured: {}", measured);
+        Timer::after_millis(500).await;
+    }
+}