Fixed broken examples/formatting reported by CI

3 files changed, 12 insertions, 6 deletions

diff --git a/examples/stm32l4/src/bin/button_exti.rs b/examples/stm32l4/src/bin/button_exti.rs
index 4d03671c0..82479eb24 100644
--- a/examples/stm32l4/src/bin/button_exti.rs
+++ b/examples/stm32l4/src/bin/button_exti.rs
@@ -3,10 +3,9 @@
 
 use defmt::*;
 use embassy_executor::Spawner;
-use embassy_stm32::bind_interrupts;
 use embassy_stm32::exti::{self, ExtiInput};
 use embassy_stm32::gpio::Pull;
-use embassy_stm32::interrupt;
+use embassy_stm32::{bind_interrupts, interrupt};
 use {defmt_rtt as _, panic_probe as _};
 
 bind_interrupts!(
diff --git a/examples/stm32l4/src/bin/spe_adin1110_http_server.rs b/examples/stm32l4/src/bin/spe_adin1110_http_server.rs
index 0dbf515cf..e079f22c7 100644
--- a/examples/stm32l4/src/bin/spe_adin1110_http_server.rs
+++ b/examples/stm32l4/src/bin/spe_adin1110_http_server.rs
@@ -24,6 +24,7 @@ use embassy_futures::yield_now;
 use embassy_net::tcp::TcpSocket;
 use embassy_net::{Ipv4Address, Ipv4Cidr, Stack, StackResources, StaticConfigV4};
 use embassy_net_adin1110::{ADIN1110, Device, Runner};
+use embassy_stm32::exti::ExtiInput;
 use embassy_stm32::gpio::{Input, Level, Output, Pull, Speed};
 use embassy_stm32::i2c::{self, Config as I2C_Config, I2c};
 use embassy_stm32::mode::Async;
@@ -31,7 +32,7 @@ use embassy_stm32::rng::{self, Rng};
 use embassy_stm32::spi::mode::Master;
 use embassy_stm32::spi::{Config as SPI_Config, Spi};
 use embassy_stm32::time::Hertz;
-use embassy_stm32::{bind_interrupts, exti, pac, peripherals};
+use embassy_stm32::{bind_interrupts, exti, interrupt, pac, peripherals};
 use embassy_time::{Delay, Duration, Ticker, Timer};
 use embedded_hal_async::i2c::I2c as I2cBus;
 use embedded_hal_bus::spi::ExclusiveDevice;
@@ -45,6 +46,7 @@ bind_interrupts!(struct Irqs {
     I2C3_EV => i2c::EventInterruptHandler<peripherals::I2C3>;
     I2C3_ER => i2c::ErrorInterruptHandler<peripherals::I2C3>;
     RNG => rng::InterruptHandler<peripherals::RNG>;
+    EXTI15_10 => exti::InterruptHandler<interrupt::typelevel::EXTI15_10>;
 });
 
 // Basic settings
@@ -125,7 +127,12 @@ async fn main(spawner: Spawner) {
     let spe_cfg1 = Input::new(dp.PC9, Pull::None);
     let _spe_ts_capt = Output::new(dp.PC6, Level::Low, Speed::Low);
 
-    let spe_int = exti::ExtiInput::new(dp.PB11, dp.EXTI11, Pull::None);
+    let spe_int = ExtiInput::new(
+        dp.PB11,
+        dp.EXTI11,
+        Pull::None,
+        Irqs::as_any::<interrupt::typelevel::EXTI15_10, exti::InterruptHandler<interrupt::typelevel::EXTI15_10>>(),
+    );
 
     let spe_spi_cs_n = Output::new(dp.PB12, Level::High, Speed::High);
     let spe_spi_sclk = dp.PB13;
diff --git a/examples/stm32l4/src/bin/spi_dma.rs b/examples/stm32l4/src/bin/spi_dma.rs
index 946a759b1..970a0c608 100644
--- a/examples/stm32l4/src/bin/spi_dma.rs
+++ b/examples/stm32l4/src/bin/spi_dma.rs
@@ -34,8 +34,8 @@ async fn main(_spawner: Spawner) {
         info!("waiting for ready");
     }
 
-    let write = [0x0A; 10];
-    let mut read = [0; 10];
+    let write = [0x0Au8; 10];
+    let mut read = [0u8; 10];
     cs.set_low();
     spi.transfer(&mut read, &write).await.ok();
     cs.set_high();