Deprecate original LoRa drivers. Update rust-lorawan releases.

1 files changed, 0 insertions, 119 deletions

diff --git a/examples/stm32wl/src/bin/subghz.rs b/examples/stm32wl/src/bin/subghz.rs
deleted file mode 100644
index 32c8b5515..000000000
--- a/examples/stm32wl/src/bin/subghz.rs
+++ /dev/null
@@ -1,119 +0,0 @@
-#![no_std]
-#![no_main]
-#![macro_use]
-#![allow(dead_code)]
-#![feature(type_alias_impl_trait)]
-
-use defmt::*;
-use embassy_executor::Spawner;
-use embassy_stm32::dma::NoDma;
-use embassy_stm32::exti::ExtiInput;
-use embassy_stm32::gpio::{Input, Level, Output, Pull, Speed};
-use embassy_stm32::interrupt;
-use embassy_stm32::interrupt::{Interrupt, InterruptExt};
-use embassy_stm32::subghz::*;
-use embassy_sync::blocking_mutex::raw::CriticalSectionRawMutex;
-use embassy_sync::signal::Signal;
-use {defmt_rtt as _, panic_probe as _};
-
-const PING_DATA: &str = "PING";
-const DATA_LEN: u8 = PING_DATA.len() as u8;
-const PING_DATA_BYTES: &[u8] = PING_DATA.as_bytes();
-const PREAMBLE_LEN: u16 = 5 * 8;
-
-const RF_FREQ: RfFreq = RfFreq::from_frequency(867_500_000);
-
-const SYNC_WORD: [u8; 8] = [0x79, 0x80, 0x0C, 0xC0, 0x29, 0x95, 0xF8, 0x4A];
-const SYNC_WORD_LEN: u8 = SYNC_WORD.len() as u8;
-const SYNC_WORD_LEN_BITS: u8 = SYNC_WORD_LEN * 8;
-
-const TX_BUF_OFFSET: u8 = 128;
-const RX_BUF_OFFSET: u8 = 0;
-const LORA_PACKET_PARAMS: LoRaPacketParams = LoRaPacketParams::new()
-    .set_crc_en(true)
-    .set_preamble_len(PREAMBLE_LEN)
-    .set_payload_len(DATA_LEN)
-    .set_invert_iq(false)
-    .set_header_type(HeaderType::Fixed);
-
-const LORA_MOD_PARAMS: LoRaModParams = LoRaModParams::new()
-    .set_bw(LoRaBandwidth::Bw125)
-    .set_cr(CodingRate::Cr45)
-    .set_ldro_en(true)
-    .set_sf(SpreadingFactor::Sf7);
-
-// configuration for +10 dBm output power
-// see table 35 "PA optimal setting and operating modes"
-const PA_CONFIG: PaConfig = PaConfig::new().set_pa_duty_cycle(0x1).set_hp_max(0x0).set_pa(PaSel::Lp);
-
-const TCXO_MODE: TcxoMode = TcxoMode::new()
-    .set_txco_trim(TcxoTrim::Volts1pt7)
-    .set_timeout(Timeout::from_duration_sat(core::time::Duration::from_millis(10)));
-
-const TX_PARAMS: TxParams = TxParams::new().set_power(0x0D).set_ramp_time(RampTime::Micros40);
-
-#[embassy_executor::main]
-async fn main(_spawner: Spawner) {
-    let mut config = embassy_stm32::Config::default();
-    config.rcc.mux = embassy_stm32::rcc::ClockSrc::HSE32;
-    let p = embassy_stm32::init(config);
-
-    let mut led1 = Output::new(p.PB15, Level::High, Speed::Low);
-    let mut led2 = Output::new(p.PB9, Level::Low, Speed::Low);
-    let mut led3 = Output::new(p.PB11, Level::Low, Speed::Low);
-
-    let button = Input::new(p.PA0, Pull::Up);
-    let mut pin = ExtiInput::new(button, p.EXTI0);
-
-    static IRQ_SIGNAL: Signal<CriticalSectionRawMutex, ()> = Signal::new();
-    let radio_irq = interrupt::take!(SUBGHZ_RADIO);
-    radio_irq.set_handler(|_| {
-        IRQ_SIGNAL.signal(());
-        unsafe { interrupt::SUBGHZ_RADIO::steal() }.disable();
-    });
-
-    let mut radio = SubGhz::new(p.SUBGHZSPI, NoDma, NoDma);
-
-    defmt::info!("Radio ready for use");
-
-    led1.set_low();
-
-    led2.set_high();
-
-    unwrap!(radio.set_standby(StandbyClk::Rc));
-    unwrap!(radio.set_tcxo_mode(&TCXO_MODE));
-    unwrap!(radio.set_standby(StandbyClk::Hse));
-    unwrap!(radio.set_regulator_mode(RegMode::Ldo));
-    unwrap!(radio.set_buffer_base_address(TX_BUF_OFFSET, RX_BUF_OFFSET));
-    unwrap!(radio.set_pa_config(&PA_CONFIG));
-    unwrap!(radio.set_pa_ocp(Ocp::Max60m));
-    unwrap!(radio.set_tx_params(&TX_PARAMS));
-    unwrap!(radio.set_packet_type(PacketType::LoRa));
-    unwrap!(radio.set_lora_sync_word(LoRaSyncWord::Public));
-    unwrap!(radio.set_lora_mod_params(&LORA_MOD_PARAMS));
-    unwrap!(radio.set_lora_packet_params(&LORA_PACKET_PARAMS));
-    unwrap!(radio.calibrate_image(CalibrateImage::ISM_863_870));
-    unwrap!(radio.set_rf_frequency(&RF_FREQ));
-
-    defmt::info!("Status: {:?}", unwrap!(radio.status()));
-
-    led2.set_low();
-
-    loop {
-        pin.wait_for_rising_edge().await;
-        led3.set_high();
-        unwrap!(radio.set_irq_cfg(&CfgIrq::new().irq_enable_all(Irq::TxDone)));
-        unwrap!(radio.write_buffer(TX_BUF_OFFSET, PING_DATA_BYTES));
-        unwrap!(radio.set_tx(Timeout::DISABLED));
-
-        radio_irq.enable();
-        IRQ_SIGNAL.wait().await;
-
-        let (_, irq_status) = unwrap!(radio.irq_status());
-        if irq_status & Irq::TxDone.mask() != 0 {
-            defmt::info!("TX done");
-        }
-        unwrap!(radio.clear_irq_status(irq_status));
-        led3.set_low();
-    }
-}