Merge branch 'embassy-rs:main' into main

23 files changed, 660 insertions, 111 deletions

diff --git a/examples/lpc55s69/src/bin/pwm.rs b/examples/lpc55s69/src/bin/pwm.rs
new file mode 100644
index 000000000..93b898b9d
--- /dev/null
+++ b/examples/lpc55s69/src/bin/pwm.rs
@@ -0,0 +1,18 @@
+#![no_std]
+#![no_main]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_nxp::pwm::{Config, Pwm};
+use embassy_time::Timer;
+use {defmt_rtt as _, panic_halt as _};
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let p = embassy_nxp::init(Default::default());
+    let pwm = Pwm::new_output(p.PWM_OUTPUT1, p.PIO0_18, Config::new(1_000_000_000, 2_000_000_000));
+    loop {
+        info!("Counter: {}", pwm.counter());
+        Timer::after_millis(50).await;
+    }
+}
diff --git a/examples/mspm0g3507/src/bin/i2c_target.rs b/examples/mspm0g3507/src/bin/i2c_target.rs
new file mode 100644
index 000000000..5dd718eaf
--- /dev/null
+++ b/examples/mspm0g3507/src/bin/i2c_target.rs
@@ -0,0 +1,63 @@
+//! Example of using async I2C target
+//!
+//! This uses the virtual COM port provided on the LP-MSPM0G3507 board.
+
+#![no_std]
+#![no_main]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_mspm0::i2c::Config;
+use embassy_mspm0::i2c_target::{Command, Config as TargetConfig, I2cTarget, ReadStatus};
+use embassy_mspm0::peripherals::I2C1;
+use embassy_mspm0::{bind_interrupts, i2c};
+use {defmt_rtt as _, panic_halt as _};
+
+bind_interrupts!(struct Irqs {
+    I2C1 => i2c::InterruptHandler<I2C1>;
+});
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) -> ! {
+    let p = embassy_mspm0::init(Default::default());
+
+    let instance = p.I2C1;
+    let scl = p.PB2;
+    let sda = p.PB3;
+
+    let config = Config::default();
+    let mut target_config = TargetConfig::default();
+    target_config.target_addr = 0x48;
+    target_config.general_call = true;
+    let mut i2c = I2cTarget::new(instance, scl, sda, Irqs, config, target_config).unwrap();
+
+    let mut read = [0u8; 8];
+    let data = [8u8; 2];
+    let data_wr = [9u8; 2];
+
+    loop {
+        match i2c.listen(&mut read).await {
+            Ok(Command::GeneralCall(_)) => info!("General call received"),
+            Ok(Command::Read) => {
+                info!("Read command received");
+                match i2c.respond_to_read(&data).await.unwrap() {
+                    ReadStatus::Done => info!("Finished reading"),
+                    ReadStatus::NeedMoreBytes => {
+                        info!("Read needs more bytes - will reset");
+                        i2c.reset().unwrap();
+                    }
+                    ReadStatus::LeftoverBytes(_) => {
+                        info!("Leftover bytes received");
+                        i2c.flush_tx_fifo();
+                    }
+                }
+            }
+            Ok(Command::Write(_)) => info!("Write command received"),
+            Ok(Command::WriteRead(_)) => {
+                info!("Write-Read command received");
+                i2c.respond_and_fill(&data_wr, 0xFE).await.unwrap();
+            }
+            Err(e) => info!("Got error {}", e),
+        }
+    }
+}
diff --git a/examples/mspm0l1306/src/bin/i2c_target.rs b/examples/mspm0l1306/src/bin/i2c_target.rs
new file mode 100644
index 000000000..4d147d08b
--- /dev/null
+++ b/examples/mspm0l1306/src/bin/i2c_target.rs
@@ -0,0 +1,63 @@
+//! Example of using async I2C target
+//!
+//! This uses the virtual COM port provided on the LP-MSPM0L1306 board.
+
+#![no_std]
+#![no_main]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_mspm0::i2c::Config;
+use embassy_mspm0::i2c_target::{Command, Config as TargetConfig, I2cTarget, ReadStatus};
+use embassy_mspm0::peripherals::I2C0;
+use embassy_mspm0::{bind_interrupts, i2c};
+use {defmt_rtt as _, panic_halt as _};
+
+bind_interrupts!(struct Irqs {
+    I2C0 => i2c::InterruptHandler<I2C0>;
+});
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) -> ! {
+    let p = embassy_mspm0::init(Default::default());
+
+    let instance = p.I2C0;
+    let scl = p.PA1;
+    let sda = p.PA0;
+
+    let config = Config::default();
+    let mut target_config = TargetConfig::default();
+    target_config.target_addr = 0x48;
+    target_config.general_call = true;
+    let mut i2c = I2cTarget::new(instance, scl, sda, Irqs, config, target_config).unwrap();
+
+    let mut read = [0u8; 8];
+    let data = [8u8; 2];
+    let data_wr = [9u8; 2];
+
+    loop {
+        match i2c.listen(&mut read).await {
+            Ok(Command::GeneralCall(_)) => info!("General call received"),
+            Ok(Command::Read) => {
+                info!("Read command received");
+                match i2c.respond_to_read(&data).await.unwrap() {
+                    ReadStatus::Done => info!("Finished reading"),
+                    ReadStatus::NeedMoreBytes => {
+                        info!("Read needs more bytes - will reset");
+                        i2c.reset().unwrap();
+                    }
+                    ReadStatus::LeftoverBytes(_) => {
+                        info!("Leftover bytes received");
+                        i2c.flush_tx_fifo();
+                    }
+                }
+            }
+            Ok(Command::Write(_)) => info!("Write command received"),
+            Ok(Command::WriteRead(_)) => {
+                info!("Write-Read command received");
+                i2c.respond_and_fill(&data_wr, 0xFE).await.unwrap();
+            }
+            Err(e) => info!("Got error {}", e),
+        }
+    }
+}
diff --git a/examples/nrf52840/src/bin/egu.rs b/examples/nrf52840/src/bin/egu.rs
index 8bf712697..36eba8084 100644
--- a/examples/nrf52840/src/bin/egu.rs
+++ b/examples/nrf52840/src/bin/egu.rs
@@ -6,7 +6,7 @@
 
 use embassy_executor::Spawner;
 use embassy_nrf::egu::{Egu, TriggerNumber};
-use embassy_nrf::gpio::{Input, Level, Output, OutputDrive, Pull};
+use embassy_nrf::gpio::{Level, OutputDrive, Pull};
 use embassy_nrf::gpiote::{InputChannel, InputChannelPolarity, OutputChannel, OutputChannelPolarity};
 use embassy_nrf::peripherals::{PPI_CH0, PPI_CH1, PPI_CH2};
 use embassy_nrf::ppi::Ppi;
@@ -17,12 +17,15 @@ use {defmt_rtt as _, panic_probe as _};
 async fn main(_spawner: Spawner) {
     let p = embassy_nrf::init(Default::default());
 
-    let led1 = Output::new(p.P0_13, Level::High, OutputDrive::Standard);
-    let btn1 = Input::new(p.P0_11, Pull::Up);
-
     let mut egu1 = Egu::new(p.EGU0);
-    let led1 = OutputChannel::new(p.GPIOTE_CH0, led1, OutputChannelPolarity::Toggle);
-    let btn1 = InputChannel::new(p.GPIOTE_CH1, btn1, InputChannelPolarity::LoToHi);
+    let led1 = OutputChannel::new(
+        p.GPIOTE_CH0,
+        p.P0_13,
+        Level::High,
+        OutputDrive::Standard,
+        OutputChannelPolarity::Toggle,
+    );
+    let btn1 = InputChannel::new(p.GPIOTE_CH1, p.P0_11, Pull::Up, InputChannelPolarity::LoToHi);
 
     let trigger0 = egu1.trigger(TriggerNumber::Trigger0);
     let trigger1 = egu1.trigger(TriggerNumber::Trigger1);
diff --git a/examples/nrf52840/src/bin/gpiote_channel.rs b/examples/nrf52840/src/bin/gpiote_channel.rs
index dcfe7723a..c7ddc1d8d 100644
--- a/examples/nrf52840/src/bin/gpiote_channel.rs
+++ b/examples/nrf52840/src/bin/gpiote_channel.rs
@@ -3,7 +3,7 @@
 
 use defmt::info;
 use embassy_executor::Spawner;
-use embassy_nrf::gpio::{Input, Pull};
+use embassy_nrf::gpio::Pull;
 use embassy_nrf::gpiote::{InputChannel, InputChannelPolarity};
 use {defmt_rtt as _, panic_probe as _};
 
@@ -12,26 +12,10 @@ async fn main(_spawner: Spawner) {
     let p = embassy_nrf::init(Default::default());
     info!("Starting!");
 
-    let ch1 = InputChannel::new(
-        p.GPIOTE_CH0,
-        Input::new(p.P0_11, Pull::Up),
-        InputChannelPolarity::HiToLo,
-    );
-    let ch2 = InputChannel::new(
-        p.GPIOTE_CH1,
-        Input::new(p.P0_12, Pull::Up),
-        InputChannelPolarity::LoToHi,
-    );
-    let ch3 = InputChannel::new(
-        p.GPIOTE_CH2,
-        Input::new(p.P0_24, Pull::Up),
-        InputChannelPolarity::Toggle,
-    );
-    let ch4 = InputChannel::new(
-        p.GPIOTE_CH3,
-        Input::new(p.P0_25, Pull::Up),
-        InputChannelPolarity::Toggle,
-    );
+    let ch1 = InputChannel::new(p.GPIOTE_CH0, p.P0_11, Pull::Up, InputChannelPolarity::HiToLo);
+    let ch2 = InputChannel::new(p.GPIOTE_CH1, p.P0_12, Pull::Up, InputChannelPolarity::LoToHi);
+    let ch3 = InputChannel::new(p.GPIOTE_CH2, p.P0_24, Pull::Up, InputChannelPolarity::Toggle);
+    let ch4 = InputChannel::new(p.GPIOTE_CH3, p.P0_25, Pull::Up, InputChannelPolarity::Toggle);
 
     let button1 = async {
         loop {
diff --git a/examples/nrf52840/src/bin/i2s_monitor.rs b/examples/nrf52840/src/bin/i2s_monitor.rs
index 66b429b09..a54659101 100644
--- a/examples/nrf52840/src/bin/i2s_monitor.rs
+++ b/examples/nrf52840/src/bin/i2s_monitor.rs
@@ -4,7 +4,7 @@
 use defmt::{debug, error, info};
 use embassy_executor::Spawner;
 use embassy_nrf::i2s::{self, Channels, Config, DoubleBuffering, I2S, MasterClock, Sample as _, SampleWidth};
-use embassy_nrf::pwm::{Prescaler, SimplePwm};
+use embassy_nrf::pwm::{DutyCycle, Prescaler, SimplePwm};
 use embassy_nrf::{bind_interrupts, peripherals};
 use {defmt_rtt as _, panic_probe as _};
 
@@ -34,7 +34,7 @@ async fn main(_spawner: Spawner) {
         I2S::new_master(p.I2S, Irqs, p.P0_25, p.P0_26, p.P0_27, master_clock, config).input(p.P0_29, buffers);
 
     // Configure the PWM to use the pins corresponding to the RGB leds
-    let mut pwm = SimplePwm::new_3ch(p.PWM0, p.P0_23, p.P0_22, p.P0_24);
+    let mut pwm = SimplePwm::new_3ch(p.PWM0, p.P0_23, p.P0_22, p.P0_24, &Default::default());
     pwm.set_prescaler(Prescaler::Div1);
     pwm.set_max_duty(255);
 
@@ -47,9 +47,8 @@ async fn main(_spawner: Spawner) {
         let rgb = rgb_from_rms(rms);
 
         debug!("RMS: {}, RGB: {:?}", rms, rgb);
-        for i in 0..3 {
-            pwm.set_duty(i, rgb[i].into());
-        }
+        let duties = rgb.map(|byte| DutyCycle::normal(u16::from(byte)));
+        pwm.set_all_duties([duties[0], duties[1], duties[2], DutyCycle::normal(0)]);
 
         if let Err(err) = input_stream.receive().await {
             error!("{}", err);
diff --git a/examples/nrf52840/src/bin/ppi.rs b/examples/nrf52840/src/bin/ppi.rs
index 129ad06e7..177f6a06d 100644
--- a/examples/nrf52840/src/bin/ppi.rs
+++ b/examples/nrf52840/src/bin/ppi.rs
@@ -5,7 +5,7 @@ use core::future::pending;
 
 use defmt::info;
 use embassy_executor::Spawner;
-use embassy_nrf::gpio::{Input, Level, Output, OutputDrive, Pull};
+use embassy_nrf::gpio::{Level, OutputDrive, Pull};
 use embassy_nrf::gpiote::{self, InputChannel, InputChannelPolarity};
 use embassy_nrf::ppi::Ppi;
 use gpiote::{OutputChannel, OutputChannelPolarity};
@@ -16,36 +16,24 @@ async fn main(_spawner: Spawner) {
     let p = embassy_nrf::init(Default::default());
     info!("Starting!");
 
-    let button1 = InputChannel::new(
-        p.GPIOTE_CH0,
-        Input::new(p.P0_11, Pull::Up),
-        InputChannelPolarity::HiToLo,
-    );
-    let button2 = InputChannel::new(
-        p.GPIOTE_CH1,
-        Input::new(p.P0_12, Pull::Up),
-        InputChannelPolarity::HiToLo,
-    );
-    let button3 = InputChannel::new(
-        p.GPIOTE_CH2,
-        Input::new(p.P0_24, Pull::Up),
-        InputChannelPolarity::HiToLo,
-    );
-    let button4 = InputChannel::new(
-        p.GPIOTE_CH3,
-        Input::new(p.P0_25, Pull::Up),
-        InputChannelPolarity::HiToLo,
-    );
+    let button1 = InputChannel::new(p.GPIOTE_CH0, p.P0_11, Pull::Up, InputChannelPolarity::HiToLo);
+    let button2 = InputChannel::new(p.GPIOTE_CH1, p.P0_12, Pull::Up, InputChannelPolarity::HiToLo);
+    let button3 = InputChannel::new(p.GPIOTE_CH2, p.P0_24, Pull::Up, InputChannelPolarity::HiToLo);
+    let button4 = InputChannel::new(p.GPIOTE_CH3, p.P0_25, Pull::Up, InputChannelPolarity::HiToLo);
 
     let led1 = OutputChannel::new(
         p.GPIOTE_CH4,
-        Output::new(p.P0_13, Level::Low, OutputDrive::Standard),
+        p.P0_13,
+        Level::Low,
+        OutputDrive::Standard,
         OutputChannelPolarity::Toggle,
     );
 
     let led2 = OutputChannel::new(
         p.GPIOTE_CH5,
-        Output::new(p.P0_14, Level::Low, OutputDrive::Standard),
+        p.P0_14,
+        Level::Low,
+        OutputDrive::Standard,
         OutputChannelPolarity::Toggle,
     );
 
diff --git a/examples/nrf52840/src/bin/pwm.rs b/examples/nrf52840/src/bin/pwm.rs
index a5bb1347a..02f9b4191 100644
--- a/examples/nrf52840/src/bin/pwm.rs
+++ b/examples/nrf52840/src/bin/pwm.rs
@@ -3,7 +3,7 @@
 
 use defmt::*;
 use embassy_executor::Spawner;
-use embassy_nrf::pwm::{Prescaler, SimplePwm};
+use embassy_nrf::pwm::{DutyCycle, Prescaler, SimplePwm};
 use embassy_time::Timer;
 use {defmt_rtt as _, panic_probe as _};
 
@@ -71,7 +71,7 @@ static DUTY: [u16; 1024] = [
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {
     let p = embassy_nrf::init(Default::default());
-    let mut pwm = SimplePwm::new_4ch(p.PWM0, p.P0_13, p.P0_14, p.P0_16, p.P0_15);
+    let mut pwm = SimplePwm::new_4ch(p.PWM0, p.P0_13, p.P0_14, p.P0_16, p.P0_15, &Default::default());
     pwm.set_prescaler(Prescaler::Div1);
     pwm.set_max_duty(32767);
     info!("pwm initialized!");
@@ -79,10 +79,12 @@ async fn main(_spawner: Spawner) {
     let mut i = 0;
     loop {
         i += 1;
-        pwm.set_duty(0, DUTY[i % 1024]);
-        pwm.set_duty(1, DUTY[(i + 256) % 1024]);
-        pwm.set_duty(2, DUTY[(i + 512) % 1024]);
-        pwm.set_duty(3, DUTY[(i + 768) % 1024]);
+        pwm.set_all_duties([
+            DutyCycle::normal(DUTY[i % 1024]),
+            DutyCycle::normal(DUTY[(i + 256) % 1024]),
+            DutyCycle::normal(DUTY[(i + 512) % 1024]),
+            DutyCycle::normal(DUTY[(i + 768) % 1024]),
+        ]);
         Timer::after_millis(3).await;
     }
 }
diff --git a/examples/nrf52840/src/bin/pwm_sequence_ppi.rs b/examples/nrf52840/src/bin/pwm_sequence_ppi.rs
index 60ea712b5..fff7decb2 100644
--- a/examples/nrf52840/src/bin/pwm_sequence_ppi.rs
+++ b/examples/nrf52840/src/bin/pwm_sequence_ppi.rs
@@ -5,7 +5,7 @@ use core::future::pending;
 
 use defmt::*;
 use embassy_executor::Spawner;
-use embassy_nrf::gpio::{Input, Pull};
+use embassy_nrf::gpio::Pull;
 use embassy_nrf::gpiote::{InputChannel, InputChannelPolarity};
 use embassy_nrf::ppi::Ppi;
 use embassy_nrf::pwm::{Config, Prescaler, SequenceConfig, SequencePwm, SingleSequenceMode, SingleSequencer};
@@ -30,17 +30,9 @@ async fn main(_spawner: Spawner) {
     // pwm.stop() deconfigures pins, and then the task_start_seq0 task cant work
     // so its going to have to start running in order load the configuration
 
-    let button1 = InputChannel::new(
-        p.GPIOTE_CH0,
-        Input::new(p.P0_11, Pull::Up),
-        InputChannelPolarity::HiToLo,
-    );
+    let button1 = InputChannel::new(p.GPIOTE_CH0, p.P0_11, Pull::Up, InputChannelPolarity::HiToLo);
 
-    let button2 = InputChannel::new(
-        p.GPIOTE_CH1,
-        Input::new(p.P0_12, Pull::Up),
-        InputChannelPolarity::HiToLo,
-    );
+    let button2 = InputChannel::new(p.GPIOTE_CH1, p.P0_12, Pull::Up, InputChannelPolarity::HiToLo);
 
     // messing with the pwm tasks is ill advised
     // Times::Ininite and Times even are seq0, Times odd is seq1
diff --git a/examples/nrf52840/src/bin/pwm_servo.rs b/examples/nrf52840/src/bin/pwm_servo.rs
index d772d2f5d..93cb984e6 100644
--- a/examples/nrf52840/src/bin/pwm_servo.rs
+++ b/examples/nrf52840/src/bin/pwm_servo.rs
@@ -3,14 +3,14 @@
 
 use defmt::*;
 use embassy_executor::Spawner;
-use embassy_nrf::pwm::{Prescaler, SimplePwm};
+use embassy_nrf::pwm::{DutyCycle, Prescaler, SimplePwm};
 use embassy_time::Timer;
 use {defmt_rtt as _, panic_probe as _};
 
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {
     let p = embassy_nrf::init(Default::default());
-    let mut pwm = SimplePwm::new_1ch(p.PWM0, p.P0_05);
+    let mut pwm = SimplePwm::new_1ch(p.PWM0, p.P0_05, &Default::default());
     // sg90 microervo requires 50hz or 20ms period
     // set_period can only set down to 125khz so we cant use it directly
     // Div128 is 125khz or 0.000008s or 0.008ms, 20/0.008 is 2500 is top
@@ -24,23 +24,23 @@ async fn main(_spawner: Spawner) {
     loop {
         info!("45 deg");
         // poor mans inverting, subtract our value from max_duty
-        pwm.set_duty(0, 2500 - 156);
+        pwm.set_duty(0, DutyCycle::normal(2500 - 156));
         Timer::after_millis(5000).await;
 
         info!("90 deg");
-        pwm.set_duty(0, 2500 - 187);
+        pwm.set_duty(0, DutyCycle::normal(2500 - 187));
         Timer::after_millis(5000).await;
 
         info!("135 deg");
-        pwm.set_duty(0, 2500 - 218);
+        pwm.set_duty(0, DutyCycle::normal(2500 - 218));
         Timer::after_millis(5000).await;
 
         info!("180 deg");
-        pwm.set_duty(0, 2500 - 250);
+        pwm.set_duty(0, DutyCycle::normal(2500 - 250));
         Timer::after_millis(5000).await;
 
         info!("0 deg");
-        pwm.set_duty(0, 2500 - 125);
+        pwm.set_duty(0, DutyCycle::normal(2500 - 125));
         Timer::after_millis(5000).await;
     }
 }
diff --git a/examples/nrf52840/src/bin/wifi_esp_hosted.rs b/examples/nrf52840/src/bin/wifi_esp_hosted.rs
index 07752ffc4..2f9c06b56 100644
--- a/examples/nrf52840/src/bin/wifi_esp_hosted.rs
+++ b/examples/nrf52840/src/bin/wifi_esp_hosted.rs
@@ -27,14 +27,12 @@ bind_interrupts!(struct Irqs {
 async fn wifi_task(
     runner: hosted::Runner<
         'static,
-        ExclusiveDevice<Spim<'static>, Output<'static>, Delay>,
-        Input<'static>,
+        hosted::SpiInterface<ExclusiveDevice<Spim<'static>, Output<'static>, Delay>, Input<'static>>,
         Output<'static>,
     >,
 ) -> ! {
     runner.run().await
 }
-
 #[embassy_executor::task]
 async fn net_task(mut runner: embassy_net::Runner<'static, hosted::NetDriver<'static>>) -> ! {
     runner.run().await
@@ -60,15 +58,11 @@ async fn main(spawner: Spawner) {
     let spi = spim::Spim::new(p.SPI3, Irqs, sck, miso, mosi, config);
     let spi = ExclusiveDevice::new(spi, cs, Delay);
 
+    let iface = hosted::SpiInterface::new(spi, handshake, ready);
+
     static ESP_STATE: StaticCell<embassy_net_esp_hosted::State> = StaticCell::new();
-    let (device, mut control, runner) = embassy_net_esp_hosted::new(
-        ESP_STATE.init(embassy_net_esp_hosted::State::new()),
-        spi,
-        handshake,
-        ready,
-        reset,
-    )
-    .await;
+    let (device, mut control, runner) =
+        embassy_net_esp_hosted::new(ESP_STATE.init(embassy_net_esp_hosted::State::new()), iface, reset).await;
 
     spawner.spawn(unwrap!(wifi_task(runner)));
 
diff --git a/examples/nrf5340/src/bin/gpiote_channel.rs b/examples/nrf5340/src/bin/gpiote_channel.rs
index 23f6fca98..a085310ce 100644
--- a/examples/nrf5340/src/bin/gpiote_channel.rs
+++ b/examples/nrf5340/src/bin/gpiote_channel.rs
@@ -3,7 +3,7 @@
 
 use defmt::info;
 use embassy_executor::Spawner;
-use embassy_nrf::gpio::{Input, Pull};
+use embassy_nrf::gpio::Pull;
 use embassy_nrf::gpiote::{InputChannel, InputChannelPolarity};
 use {defmt_rtt as _, panic_probe as _};
 
@@ -12,26 +12,10 @@ async fn main(_spawner: Spawner) {
     let p = embassy_nrf::init(Default::default());
     info!("Starting!");
 
-    let ch1 = InputChannel::new(
-        p.GPIOTE_CH0,
-        Input::new(p.P0_23, Pull::Up),
-        InputChannelPolarity::HiToLo,
-    );
-    let ch2 = InputChannel::new(
-        p.GPIOTE_CH1,
-        Input::new(p.P0_24, Pull::Up),
-        InputChannelPolarity::LoToHi,
-    );
-    let ch3 = InputChannel::new(
-        p.GPIOTE_CH2,
-        Input::new(p.P0_08, Pull::Up),
-        InputChannelPolarity::Toggle,
-    );
-    let ch4 = InputChannel::new(
-        p.GPIOTE_CH3,
-        Input::new(p.P0_09, Pull::Up),
-        InputChannelPolarity::Toggle,
-    );
+    let ch1 = InputChannel::new(p.GPIOTE_CH0, p.P0_23, Pull::Up, InputChannelPolarity::HiToLo);
+    let ch2 = InputChannel::new(p.GPIOTE_CH1, p.P0_24, Pull::Up, InputChannelPolarity::LoToHi);
+    let ch3 = InputChannel::new(p.GPIOTE_CH2, p.P0_08, Pull::Up, InputChannelPolarity::Toggle);
+    let ch4 = InputChannel::new(p.GPIOTE_CH3, p.P0_09, Pull::Up, InputChannelPolarity::Toggle);
 
     let button1 = async {
         loop {
diff --git a/examples/nrf54l15/Cargo.toml b/examples/nrf54l15/Cargo.toml
index a053dd0ec..14a80efe7 100644
--- a/examples/nrf54l15/Cargo.toml
+++ b/examples/nrf54l15/Cargo.toml
@@ -6,9 +6,13 @@ license = "MIT OR Apache-2.0"
 publish = false
 
 [dependencies]
+embassy-futures = { version = "0.1.2", path = "../../embassy-futures" }
 embassy-executor = { version = "0.9.0", path = "../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "executor-interrupt", "defmt"] }
 embassy-time = { version = "0.5.0", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime"] }
+embassy-sync = { version = "0.7.2", path = "../../embassy-sync", features = ["defmt"] }
 embassy-nrf = { version = "0.8.0", path = "../../embassy-nrf", features = ["defmt", "nrf54l15-app-s", "time-driver-rtc1", "gpiote", "unstable-pac", "time"] }
+embedded-io = { version = "0.6.0", features = ["defmt-03"]  }
+embedded-io-async = { version = "0.6.1", features = ["defmt-03"] }
 
 defmt = "1.0.1"
 defmt-rtt = "1.0.0"
@@ -18,6 +22,9 @@ cortex-m = { version = "0.7.6", features = ["inline-asm", "critical-section-sing
 cortex-m-rt = "0.7.0"
 
 embedded-storage = "0.3.1"
+portable-atomic = "1"
+
+static_cell = "2"
 
 [profile.release]
 debug = 2
diff --git a/examples/nrf54l15/src/bin/buffered_uart.rs b/examples/nrf54l15/src/bin/buffered_uart.rs
new file mode 100644
index 000000000..41fa1ca4e
--- /dev/null
+++ b/examples/nrf54l15/src/bin/buffered_uart.rs
@@ -0,0 +1,49 @@
+#![no_std]
+#![no_main]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_nrf::buffered_uarte::{self, BufferedUarte};
+use embassy_nrf::{bind_interrupts, peripherals, uarte};
+use embedded_io_async::Write;
+use {defmt_rtt as _, panic_probe as _};
+
+bind_interrupts!(struct Irqs {
+    SERIAL20 => buffered_uarte::InterruptHandler<peripherals::SERIAL20>;
+});
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let p = embassy_nrf::init(Default::default());
+    let mut config = uarte::Config::default();
+    config.parity = uarte::Parity::EXCLUDED;
+    config.baudrate = uarte::Baudrate::BAUD115200;
+
+    let mut tx_buffer = [0u8; 4096];
+    let mut rx_buffer = [0u8; 4096];
+
+    let mut u = BufferedUarte::new(
+        p.SERIAL20,
+        p.P1_12,
+        p.P1_13,
+        Irqs,
+        config,
+        &mut rx_buffer,
+        &mut tx_buffer,
+    );
+
+    info!("uarte initialized!");
+
+    unwrap!(u.write_all(b"Hello!\r\n").await);
+    info!("wrote hello in uart!");
+
+    loop {
+        info!("reading...");
+        let buf = unwrap!(u.fill_buf().await);
+        info!("read done, got {}", buf);
+
+        // Read bytes have to be explicitly consumed, otherwise fill_buf() will return them again
+        let n = buf.len();
+        u.consume(n);
+    }
+}
diff --git a/examples/nrf54l15/src/bin/gpiote_channel.rs b/examples/nrf54l15/src/bin/gpiote_channel.rs
new file mode 100644
index 000000000..6333250ba
--- /dev/null
+++ b/examples/nrf54l15/src/bin/gpiote_channel.rs
@@ -0,0 +1,49 @@
+#![no_std]
+#![no_main]
+
+use defmt::info;
+use embassy_executor::Spawner;
+use embassy_nrf::gpio::Pull;
+use embassy_nrf::gpiote::{InputChannel, InputChannelPolarity};
+use {defmt_rtt as _, panic_probe as _};
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let p = embassy_nrf::init(Default::default());
+    info!("Starting!");
+
+    let ch1 = InputChannel::new(p.GPIOTE20_CH0, p.P1_13, Pull::Up, InputChannelPolarity::HiToLo);
+    let ch2 = InputChannel::new(p.GPIOTE20_CH1, p.P1_09, Pull::Up, InputChannelPolarity::LoToHi);
+    let ch3 = InputChannel::new(p.GPIOTE20_CH2, p.P1_08, Pull::Up, InputChannelPolarity::Toggle);
+    let ch4 = InputChannel::new(p.GPIOTE30_CH0, p.P0_04, Pull::Up, InputChannelPolarity::Toggle);
+
+    let button1 = async {
+        loop {
+            ch1.wait().await;
+            info!("Button 1 pressed")
+        }
+    };
+
+    let button2 = async {
+        loop {
+            ch2.wait().await;
+            info!("Button 2 released")
+        }
+    };
+
+    let button3 = async {
+        loop {
+            ch3.wait().await;
+            info!("Button 3 toggled")
+        }
+    };
+
+    let button4 = async {
+        loop {
+            ch4.wait().await;
+            info!("Button 4 toggled")
+        }
+    };
+
+    embassy_futures::join::join4(button1, button2, button3, button4).await;
+}
diff --git a/examples/nrf54l15/src/bin/gpiote_port.rs b/examples/nrf54l15/src/bin/gpiote_port.rs
new file mode 100644
index 000000000..620cb2435
--- /dev/null
+++ b/examples/nrf54l15/src/bin/gpiote_port.rs
@@ -0,0 +1,33 @@
+#![no_std]
+#![no_main]
+
+use defmt::{info, unwrap};
+use embassy_executor::Spawner;
+use embassy_nrf::gpio::{Input, Pull};
+use {defmt_rtt as _, panic_probe as _};
+
+#[embassy_executor::task(pool_size = 4)]
+async fn button_task(n: usize, mut pin: Input<'static>) {
+    loop {
+        pin.wait_for_low().await;
+        info!("Button {:?} pressed!", n);
+        pin.wait_for_high().await;
+        info!("Button {:?} released!", n);
+    }
+}
+
+#[embassy_executor::main]
+async fn main(spawner: Spawner) {
+    let p = embassy_nrf::init(Default::default());
+    info!("Starting!");
+
+    let btn1 = Input::new(p.P1_13, Pull::Up);
+    let btn2 = Input::new(p.P1_09, Pull::Up);
+    let btn3 = Input::new(p.P1_08, Pull::Up);
+    let btn4 = Input::new(p.P0_04, Pull::Up);
+
+    spawner.spawn(unwrap!(button_task(1, btn1)));
+    spawner.spawn(unwrap!(button_task(2, btn2)));
+    spawner.spawn(unwrap!(button_task(3, btn3)));
+    spawner.spawn(unwrap!(button_task(4, btn4)));
+}
diff --git a/examples/nrf54l15/src/bin/pwm.rs b/examples/nrf54l15/src/bin/pwm.rs
new file mode 100644
index 000000000..b438978f1
--- /dev/null
+++ b/examples/nrf54l15/src/bin/pwm.rs
@@ -0,0 +1,86 @@
+#![no_std]
+#![no_main]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_nrf::pwm::{DutyCycle, Prescaler, SimplePwm};
+use embassy_time::Timer;
+use {defmt_rtt as _, panic_probe as _};
+
+// for i in range(1024): print(int((math.sin(i/512*math.pi)*0.4+0.5)**2*32767), ', ', end='')
+static DUTY: [u16; 1024] = [
+    8191, 8272, 8353, 8434, 8516, 8598, 8681, 8764, 8847, 8931, 9015, 9099, 9184, 9269, 9354, 9440, 9526, 9613, 9700,
+    9787, 9874, 9962, 10050, 10139, 10227, 10316, 10406, 10495, 10585, 10675, 10766, 10857, 10948, 11039, 11131, 11223,
+    11315, 11407, 11500, 11592, 11685, 11779, 11872, 11966, 12060, 12154, 12248, 12343, 12438, 12533, 12628, 12723,
+    12818, 12914, 13010, 13106, 13202, 13298, 13394, 13491, 13587, 13684, 13781, 13878, 13975, 14072, 14169, 14266,
+    14364, 14461, 14558, 14656, 14754, 14851, 14949, 15046, 15144, 15242, 15339, 15437, 15535, 15632, 15730, 15828,
+    15925, 16023, 16120, 16218, 16315, 16412, 16510, 16607, 16704, 16801, 16898, 16995, 17091, 17188, 17284, 17380,
+    17477, 17572, 17668, 17764, 17859, 17955, 18050, 18145, 18239, 18334, 18428, 18522, 18616, 18710, 18803, 18896,
+    18989, 19082, 19174, 19266, 19358, 19449, 19540, 19631, 19722, 19812, 19902, 19991, 20081, 20169, 20258, 20346,
+    20434, 20521, 20608, 20695, 20781, 20867, 20952, 21037, 21122, 21206, 21290, 21373, 21456, 21538, 21620, 21701,
+    21782, 21863, 21943, 22022, 22101, 22179, 22257, 22335, 22412, 22488, 22564, 22639, 22714, 22788, 22861, 22934,
+    23007, 23079, 23150, 23220, 23290, 23360, 23429, 23497, 23564, 23631, 23698, 23763, 23828, 23892, 23956, 24019,
+    24081, 24143, 24204, 24264, 24324, 24383, 24441, 24499, 24555, 24611, 24667, 24721, 24775, 24828, 24881, 24933,
+    24983, 25034, 25083, 25132, 25180, 25227, 25273, 25319, 25363, 25407, 25451, 25493, 25535, 25575, 25615, 25655,
+    25693, 25731, 25767, 25803, 25838, 25873, 25906, 25939, 25971, 26002, 26032, 26061, 26089, 26117, 26144, 26170,
+    26195, 26219, 26242, 26264, 26286, 26307, 26327, 26346, 26364, 26381, 26397, 26413, 26427, 26441, 26454, 26466,
+    26477, 26487, 26496, 26505, 26512, 26519, 26525, 26530, 26534, 26537, 26539, 26540, 26541, 26540, 26539, 26537,
+    26534, 26530, 26525, 26519, 26512, 26505, 26496, 26487, 26477, 26466, 26454, 26441, 26427, 26413, 26397, 26381,
+    26364, 26346, 26327, 26307, 26286, 26264, 26242, 26219, 26195, 26170, 26144, 26117, 26089, 26061, 26032, 26002,
+    25971, 25939, 25906, 25873, 25838, 25803, 25767, 25731, 25693, 25655, 25615, 25575, 25535, 25493, 25451, 25407,
+    25363, 25319, 25273, 25227, 25180, 25132, 25083, 25034, 24983, 24933, 24881, 24828, 24775, 24721, 24667, 24611,
+    24555, 24499, 24441, 24383, 24324, 24264, 24204, 24143, 24081, 24019, 23956, 23892, 23828, 23763, 23698, 23631,
+    23564, 23497, 23429, 23360, 23290, 23220, 23150, 23079, 23007, 22934, 22861, 22788, 22714, 22639, 22564, 22488,
+    22412, 22335, 22257, 22179, 22101, 22022, 21943, 21863, 21782, 21701, 21620, 21538, 21456, 21373, 21290, 21206,
+    21122, 21037, 20952, 20867, 20781, 20695, 20608, 20521, 20434, 20346, 20258, 20169, 20081, 19991, 19902, 19812,
+    19722, 19631, 19540, 19449, 19358, 19266, 19174, 19082, 18989, 18896, 18803, 18710, 18616, 18522, 18428, 18334,
+    18239, 18145, 18050, 17955, 17859, 17764, 17668, 17572, 17477, 17380, 17284, 17188, 17091, 16995, 16898, 16801,
+    16704, 16607, 16510, 16412, 16315, 16218, 16120, 16023, 15925, 15828, 15730, 15632, 15535, 15437, 15339, 15242,
+    15144, 15046, 14949, 14851, 14754, 14656, 14558, 14461, 14364, 14266, 14169, 14072, 13975, 13878, 13781, 13684,
+    13587, 13491, 13394, 13298, 13202, 13106, 13010, 12914, 12818, 12723, 12628, 12533, 12438, 12343, 12248, 12154,
+    12060, 11966, 11872, 11779, 11685, 11592, 11500, 11407, 11315, 11223, 11131, 11039, 10948, 10857, 10766, 10675,
+    10585, 10495, 10406, 10316, 10227, 10139, 10050, 9962, 9874, 9787, 9700, 9613, 9526, 9440, 9354, 9269, 9184, 9099,
+    9015, 8931, 8847, 8764, 8681, 8598, 8516, 8434, 8353, 8272, 8191, 8111, 8031, 7952, 7873, 7794, 7716, 7638, 7561,
+    7484, 7407, 7331, 7255, 7180, 7105, 7031, 6957, 6883, 6810, 6738, 6665, 6594, 6522, 6451, 6381, 6311, 6241, 6172,
+    6104, 6036, 5968, 5901, 5834, 5767, 5702, 5636, 5571, 5507, 5443, 5379, 5316, 5253, 5191, 5130, 5068, 5008, 4947,
+    4888, 4828, 4769, 4711, 4653, 4596, 4539, 4482, 4426, 4371, 4316, 4261, 4207, 4153, 4100, 4047, 3995, 3943, 3892,
+    3841, 3791, 3741, 3691, 3642, 3594, 3546, 3498, 3451, 3404, 3358, 3312, 3267, 3222, 3178, 3134, 3090, 3047, 3005,
+    2962, 2921, 2879, 2839, 2798, 2758, 2719, 2680, 2641, 2603, 2565, 2528, 2491, 2454, 2418, 2382, 2347, 2312, 2278,
+    2244, 2210, 2177, 2144, 2112, 2080, 2048, 2017, 1986, 1956, 1926, 1896, 1867, 1838, 1810, 1781, 1754, 1726, 1699,
+    1673, 1646, 1620, 1595, 1570, 1545, 1520, 1496, 1472, 1449, 1426, 1403, 1380, 1358, 1336, 1315, 1294, 1273, 1252,
+    1232, 1212, 1192, 1173, 1154, 1135, 1117, 1099, 1081, 1063, 1046, 1029, 1012, 996, 980, 964, 948, 933, 918, 903,
+    888, 874, 860, 846, 833, 819, 806, 793, 781, 768, 756, 744, 733, 721, 710, 699, 688, 677, 667, 657, 647, 637, 627,
+    618, 609, 599, 591, 582, 574, 565, 557, 549, 541, 534, 526, 519, 512, 505, 498, 492, 485, 479, 473, 467, 461, 455,
+    450, 444, 439, 434, 429, 424, 419, 415, 410, 406, 402, 398, 394, 390, 386, 383, 379, 376, 373, 370, 367, 364, 361,
+    359, 356, 354, 351, 349, 347, 345, 343, 342, 340, 338, 337, 336, 334, 333, 332, 331, 330, 330, 329, 328, 328, 328,
+    327, 327, 327, 327, 327, 328, 328, 328, 329, 330, 330, 331, 332, 333, 334, 336, 337, 338, 340, 342, 343, 345, 347,
+    349, 351, 354, 356, 359, 361, 364, 367, 370, 373, 376, 379, 383, 386, 390, 394, 398, 402, 406, 410, 415, 419, 424,
+    429, 434, 439, 444, 450, 455, 461, 467, 473, 479, 485, 492, 498, 505, 512, 519, 526, 534, 541, 549, 557, 565, 574,
+    582, 591, 599, 609, 618, 627, 637, 647, 657, 667, 677, 688, 699, 710, 721, 733, 744, 756, 768, 781, 793, 806, 819,
+    833, 846, 860, 874, 888, 903, 918, 933, 948, 964, 980, 996, 1012, 1029, 1046, 1063, 1081, 1099, 1117, 1135, 1154,
+    1173, 1192, 1212, 1232, 1252, 1273, 1294, 1315, 1336, 1358, 1380, 1403, 1426, 1449, 1472, 1496, 1520, 1545, 1570,
+    1595, 1620, 1646, 1673, 1699, 1726, 1754, 1781, 1810, 1838, 1867, 1896, 1926, 1956, 1986, 2017, 2048, 2080, 2112,
+    2144, 2177, 2210, 2244, 2278, 2312, 2347, 2382, 2418, 2454, 2491, 2528, 2565, 2603, 2641, 2680, 2719, 2758, 2798,
+    2839, 2879, 2921, 2962, 3005, 3047, 3090, 3134, 3178, 3222, 3267, 3312, 3358, 3404, 3451, 3498, 3546, 3594, 3642,
+    3691, 3741, 3791, 3841, 3892, 3943, 3995, 4047, 4100, 4153, 4207, 4261, 4316, 4371, 4426, 4482, 4539, 4596, 4653,
+    4711, 4769, 4828, 4888, 4947, 5008, 5068, 5130, 5191, 5253, 5316, 5379, 5443, 5507, 5571, 5636, 5702, 5767, 5834,
+    5901, 5968, 6036, 6104, 6172, 6241, 6311, 6381, 6451, 6522, 6594, 6665, 6738, 6810, 6883, 6957, 7031, 7105, 7180,
+    7255, 7331, 7407, 7484, 7561, 7638, 7716, 7794, 7873, 7952, 8031, 8111,
+];
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let p = embassy_nrf::init(Default::default());
+    let mut pwm = SimplePwm::new_2ch(p.PWM20, p.P1_10, p.P1_14, &Default::default());
+    pwm.set_prescaler(Prescaler::Div1);
+    pwm.set_max_duty(32767);
+    info!("pwm initialized!");
+
+    let mut i = 0;
+    loop {
+        i += 1;
+        pwm.set_duty(0, DutyCycle::normal(DUTY[i % 1024]));
+        pwm.set_duty(1, DutyCycle::normal(DUTY[(i + 512) % 1024]));
+        Timer::after_millis(3).await;
+    }
+}
diff --git a/examples/nrf54l15/src/bin/rtc.rs b/examples/nrf54l15/src/bin/rtc.rs
new file mode 100644
index 000000000..a45aaca52
--- /dev/null
+++ b/examples/nrf54l15/src/bin/rtc.rs
@@ -0,0 +1,56 @@
+#![no_std]
+#![no_main]
+
+use core::cell::RefCell;
+
+use embassy_executor::Spawner;
+use embassy_nrf::gpio::{Level, Output, OutputDrive};
+use embassy_nrf::interrupt;
+use embassy_nrf::rtc::Rtc;
+use embassy_sync::blocking_mutex::Mutex;
+use embassy_sync::blocking_mutex::raw::CriticalSectionRawMutex;
+use portable_atomic::AtomicU64;
+use {defmt_rtt as _, panic_probe as _};
+
+// 64 bit counter which will never overflow.
+static TICK_COUNTER: AtomicU64 = AtomicU64::new(0);
+static RTC: Mutex<CriticalSectionRawMutex, RefCell<Option<Rtc<'static>>>> = Mutex::new(RefCell::new(None));
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    defmt::println!("nRF54L15 RTC example");
+    let p = embassy_nrf::init(Default::default());
+    let mut led = Output::new(p.P2_09, Level::High, OutputDrive::Standard);
+    // Counter resolution is 125 ms.
+    let mut rtc = Rtc::new(p.RTC10, (1 << 12) - 1).unwrap();
+    rtc.enable_interrupt(embassy_nrf::rtc::Interrupt::Tick, true);
+    rtc.enable_event(embassy_nrf::rtc::Interrupt::Tick);
+    rtc.enable();
+    RTC.lock(|r| {
+        let mut rtc_borrow = r.borrow_mut();
+        *rtc_borrow = Some(rtc);
+    });
+
+    let mut last_counter_val = 0;
+    loop {
+        let current = TICK_COUNTER.load(core::sync::atomic::Ordering::Relaxed);
+        if current != last_counter_val {
+            led.toggle();
+            last_counter_val = current;
+        }
+    }
+}
+
+#[interrupt]
+fn RTC10() {
+    // For 64-bit, we do not need to worry about overflowing, at least not for realistic program
+    // lifetimes.
+    TICK_COUNTER.fetch_add(1, core::sync::atomic::Ordering::Relaxed);
+    RTC.lock(|r| {
+        let mut rtc_borrow = r.borrow_mut();
+        rtc_borrow
+            .as_mut()
+            .unwrap()
+            .reset_event(embassy_nrf::rtc::Interrupt::Tick);
+    });
+}
diff --git a/examples/nrf54l15/src/bin/saadc.rs b/examples/nrf54l15/src/bin/saadc.rs
new file mode 100644
index 000000000..567177894
--- /dev/null
+++ b/examples/nrf54l15/src/bin/saadc.rs
@@ -0,0 +1,28 @@
+#![no_std]
+#![no_main]
+
+use defmt::info;
+use embassy_executor::Spawner;
+use embassy_nrf::saadc::{ChannelConfig, Config, Saadc};
+use embassy_nrf::{bind_interrupts, saadc};
+use embassy_time::Timer;
+use {defmt_rtt as _, panic_probe as _};
+
+bind_interrupts!(struct Irqs {
+    SAADC => saadc::InterruptHandler;
+});
+
+#[embassy_executor::main]
+async fn main(_p: Spawner) {
+    let mut p = embassy_nrf::init(Default::default());
+    let config = Config::default();
+    let channel_config = ChannelConfig::single_ended(p.P1_04.reborrow());
+    let mut saadc = Saadc::new(p.SAADC, Irqs, config, [channel_config]);
+
+    loop {
+        let mut buf = [0; 1];
+        saadc.sample(&mut buf).await;
+        info!("sample: {=i16}", &buf[0]);
+        Timer::after_millis(100).await;
+    }
+}
diff --git a/examples/nrf54l15/src/bin/spim.rs b/examples/nrf54l15/src/bin/spim.rs
new file mode 100644
index 000000000..3f5980647
--- /dev/null
+++ b/examples/nrf54l15/src/bin/spim.rs
@@ -0,0 +1,30 @@
+#![no_std]
+#![no_main]
+
+use embassy_executor::Spawner;
+use embassy_nrf::{bind_interrupts, peripherals, spim};
+use {defmt_rtt as _, panic_probe as _};
+
+bind_interrupts!(struct Irqs {
+    SERIAL00 => spim::InterruptHandler<peripherals::SERIAL00>;
+});
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let p = embassy_nrf::init(Default::default());
+    let mut config = spim::Config::default();
+    config.frequency = spim::Frequency::M32;
+    let mut spim = spim::Spim::new(p.SERIAL00, Irqs, p.P2_05, p.P2_09, p.P2_08, config.clone());
+    let data = [
+        0x42, 0x43, 0x44, 0x45, 0x66, 0x12, 0x23, 0x34, 0x45, 0x19, 0x91, 0xaa, 0xff, 0xa5, 0x5a, 0x77,
+    ];
+    let mut buf = [0u8; 16];
+
+    buf.fill(0);
+    spim.blocking_transfer(&mut buf, &data).unwrap();
+    assert_eq!(data, buf);
+
+    buf.fill(0);
+    spim.transfer(&mut buf, &data).await.unwrap();
+    assert_eq!(data, buf);
+}
diff --git a/examples/nrf54l15/src/bin/twim.rs b/examples/nrf54l15/src/bin/twim.rs
new file mode 100644
index 000000000..53b85034e
--- /dev/null
+++ b/examples/nrf54l15/src/bin/twim.rs
@@ -0,0 +1,37 @@
+//! Example on how to read a 24C/24LC i2c eeprom.
+//!
+//! Connect SDA to P0.03, SCL to P0.04
+
+#![no_std]
+#![no_main]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_nrf::twim::{self, Twim};
+use embassy_nrf::{bind_interrupts, peripherals};
+use static_cell::ConstStaticCell;
+use {defmt_rtt as _, panic_probe as _};
+
+const ADDRESS: u8 = 0x18;
+const WHOAMI: u8 = 0x0F;
+
+bind_interrupts!(struct Irqs {
+    SERIAL20 => twim::InterruptHandler<peripherals::SERIAL20>;
+});
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let p = embassy_nrf::init(Default::default());
+    info!("Initializing TWI...");
+    let config = twim::Config::default();
+    static RAM_BUFFER: ConstStaticCell<[u8; 16]> = ConstStaticCell::new([0; 16]);
+    let mut twi = Twim::new(p.SERIAL20, Irqs, p.P1_13, p.P1_12, config, RAM_BUFFER.take());
+
+    info!("Reading...");
+
+    let mut data = [0u8; 1];
+    match twi.write_read(ADDRESS, &[WHOAMI], &mut data).await {
+        Ok(()) => info!("Whoami: {}", data[0]),
+        Err(e) => error!("I2c Error: {:?}", e),
+    }
+}
diff --git a/examples/nrf54l15/src/bin/twis.rs b/examples/nrf54l15/src/bin/twis.rs
new file mode 100644
index 000000000..34c04aee3
--- /dev/null
+++ b/examples/nrf54l15/src/bin/twis.rs
@@ -0,0 +1,47 @@
+//! TWIS example
+
+#![no_std]
+#![no_main]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_nrf::twis::{self, Command, Twis};
+use embassy_nrf::{bind_interrupts, peripherals};
+use {defmt_rtt as _, panic_probe as _};
+
+bind_interrupts!(struct Irqs {
+    SERIAL20 => twis::InterruptHandler<peripherals::SERIAL20>;
+});
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let p = embassy_nrf::init(Default::default());
+
+    let mut config = twis::Config::default();
+    config.address0 = 0x55; // Set i2c address
+    let mut i2c = Twis::new(p.SERIAL20, Irqs, p.P0_03, p.P0_04, config);
+
+    info!("Listening...");
+    loop {
+        let response = [1, 2, 3, 4, 5, 6, 7, 8];
+        // This buffer is used if the i2c master performs a Write or WriteRead
+        let mut buf = [0u8; 16];
+        match i2c.listen(&mut buf).await {
+            Ok(Command::Read) => {
+                info!("Got READ command. Respond with data:\n{:?}\n", response);
+                if let Err(e) = i2c.respond_to_read(&response).await {
+                    error!("{:?}", e);
+                }
+            }
+            Ok(Command::Write(n)) => info!("Got WRITE command with data:\n{:?}\n", buf[..n]),
+            Ok(Command::WriteRead(n)) => {
+                info!("Got WRITE/READ command with data:\n{:?}", buf[..n]);
+                info!("Respond with data:\n{:?}\n", response);
+                if let Err(e) = i2c.respond_to_read(&response).await {
+                    error!("{:?}", e);
+                }
+            }
+            Err(e) => error!("{:?}", e),
+        }
+    }
+}
diff --git a/examples/nrf54l15/src/bin/uart.rs b/examples/nrf54l15/src/bin/uart.rs
new file mode 100644
index 000000000..cc6528a6f
--- /dev/null
+++ b/examples/nrf54l15/src/bin/uart.rs
@@ -0,0 +1,37 @@
+#![no_std]
+#![no_main]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_nrf::{bind_interrupts, peripherals, uarte};
+use {defmt_rtt as _, panic_probe as _};
+
+bind_interrupts!(struct Irqs {
+    SERIAL20 => uarte::InterruptHandler<peripherals::SERIAL20>;
+});
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let p = embassy_nrf::init(Default::default());
+    let mut config = uarte::Config::default();
+    config.parity = uarte::Parity::EXCLUDED;
+    config.baudrate = uarte::Baudrate::BAUD115200;
+
+    let mut uart = uarte::Uarte::new(p.SERIAL20, p.P1_12, p.P1_13, Irqs, config);
+
+    info!("uarte initialized!");
+
+    // Message must be in SRAM
+    let mut buf = [0; 8];
+    buf.copy_from_slice(b"Hello!\r\n");
+
+    unwrap!(uart.write(&buf).await);
+    info!("wrote hello in uart!");
+
+    loop {
+        info!("reading...");
+        unwrap!(uart.read(&mut buf).await);
+        info!("writing...");
+        unwrap!(uart.write(&buf).await);
+    }
+}