stm32: autogenerate mux config for all chips.

14 files changed, 93 insertions, 95 deletions

diff --git a/examples/stm32f334/src/bin/pwm.rs b/examples/stm32f334/src/bin/pwm.rs
index 7c6d6cd71..e6d1a6c02 100644
--- a/examples/stm32f334/src/bin/pwm.rs
+++ b/examples/stm32f334/src/bin/pwm.rs
@@ -28,7 +28,7 @@ async fn main(_spawner: Spawner) {
         config.rcc.apb1_pre = APBPrescaler::DIV2;
         config.rcc.apb2_pre = APBPrescaler::DIV1;
 
-        config.rcc.mux.hrtim1sw = Some(embassy_stm32::rcc::mux::Timsw::PLL1_P);
+        config.rcc.mux.hrtim1sw = embassy_stm32::rcc::mux::Timsw::PLL1_P;
     }
     let p = embassy_stm32::init(config);
 
diff --git a/examples/stm32g0/src/bin/hf_timer.rs b/examples/stm32g0/src/bin/hf_timer.rs
index 3f63d0dfd..647ff0419 100644
--- a/examples/stm32g0/src/bin/hf_timer.rs
+++ b/examples/stm32g0/src/bin/hf_timer.rs
@@ -4,37 +4,35 @@
 use defmt::info;
 use embassy_executor::Spawner;
 use embassy_stm32::gpio::OutputType;
-use embassy_stm32::pac::rcc::vals::Tim1sel;
-use embassy_stm32::rcc::{Config as RccConfig, PllConfig, PllSource, Pllm, Plln, Pllq, Pllr, Sysclk};
 use embassy_stm32::time::khz;
 use embassy_stm32::timer::complementary_pwm::{ComplementaryPwm, ComplementaryPwmPin};
 use embassy_stm32::timer::simple_pwm::PwmPin;
 use embassy_stm32::timer::Channel;
-use embassy_stm32::{pac, Config as PeripheralConfig};
+use embassy_stm32::Config as PeripheralConfig;
 use {defmt_rtt as _, panic_probe as _};
 
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {
-    let mut rcc_config = RccConfig::default();
-    rcc_config.sys = Sysclk::PLL(PllConfig {
-        source: PllSource::HSI,
-        m: Pllm::DIV1,
-        n: Plln::MUL16,
-        r: Pllr::DIV4,       // CPU clock comes from PLLR (HSI (16MHz) / 1 * 16 / 4 = 64MHz)
-        q: Some(Pllq::DIV2), // TIM1 or TIM15 can be sourced from PLLQ (HSI (16MHz) / 1 * 16 / 2 = 128MHz)
-        p: None,
-    });
-
-    let mut peripheral_config = PeripheralConfig::default();
-    peripheral_config.rcc = rcc_config;
-
-    let p = embassy_stm32::init(peripheral_config);
-
-    // configure TIM1 mux to select PLLQ as clock source
-    // https://www.st.com/resource/en/reference_manual/rm0444-stm32g0x1-advanced-armbased-32bit-mcus-stmicroelectronics.pdf
-    // RM0444 page 210
-    // RCC - Peripherals Independent Clock Control Register - bit 22 -> 1
-    pac::RCC.ccipr().modify(|w| w.set_tim1sel(Tim1sel::PLL1_Q));
+    let mut config = PeripheralConfig::default();
+    {
+        use embassy_stm32::rcc::*;
+
+        config.rcc.sys = Sysclk::PLL(PllConfig {
+            source: PllSource::HSI,
+            m: Pllm::DIV1,
+            n: Plln::MUL16,
+            r: Pllr::DIV4,       // CPU clock comes from PLLR (HSI (16MHz) / 1 * 16 / 4 = 64MHz)
+            q: Some(Pllq::DIV2), // TIM1 or TIM15 can be sourced from PLLQ (HSI (16MHz) / 1 * 16 / 2 = 128MHz)
+            p: None,
+        });
+
+        // configure TIM1 mux to select PLLQ as clock source
+        // https://www.st.com/resource/en/reference_manual/rm0444-stm32g0x1-advanced-armbased-32bit-mcus-stmicroelectronics.pdf
+        // RM0444 page 210
+        // RCC - Peripherals Independent Clock Control Register - bit 22 -> 1
+        config.rcc.mux.tim1sel = embassy_stm32::rcc::mux::Tim1sel::PLL1_Q;
+    }
+    let p = embassy_stm32::init(config);
 
     let ch1 = PwmPin::new_ch1(p.PA8, OutputType::PushPull);
     let ch1n = ComplementaryPwmPin::new_ch1(p.PA7, OutputType::PushPull);
diff --git a/examples/stm32g0/src/bin/usb_serial.rs b/examples/stm32g0/src/bin/usb_serial.rs
index f5aaa5624..8b9915626 100644
--- a/examples/stm32g0/src/bin/usb_serial.rs
+++ b/examples/stm32g0/src/bin/usb_serial.rs
@@ -4,7 +4,6 @@
 use defmt::{panic, *};
 use embassy_executor::Spawner;
 use embassy_futures::join::join;
-use embassy_stm32::rcc::{Hsi48Config, UsbSrc};
 use embassy_stm32::usb::{Driver, Instance};
 use embassy_stm32::{bind_interrupts, peripherals, usb, Config};
 use embassy_usb::class::cdc_acm::{CdcAcmClass, State};
@@ -19,10 +18,11 @@ bind_interrupts!(struct Irqs {
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {
     let mut config = Config::default();
-    config.rcc.usb_src = Some(UsbSrc::Hsi48(Hsi48Config {
-        sync_from_usb: true,
-        ..Default::default()
-    }));
+    {
+        use embassy_stm32::rcc::*;
+        config.rcc.hsi48 = Some(Hsi48Config { sync_from_usb: true });
+        config.rcc.mux.usbsel = mux::Usbsel::HSI48;
+    }
     let p = embassy_stm32::init(config);
 
     info!("Hello World!");
diff --git a/examples/stm32g4/src/bin/adc.rs b/examples/stm32g4/src/bin/adc.rs
index 6c6de1ffe..f81335f93 100644
--- a/examples/stm32g4/src/bin/adc.rs
+++ b/examples/stm32g4/src/bin/adc.rs
@@ -4,7 +4,6 @@
 use defmt::*;
 use embassy_executor::Spawner;
 use embassy_stm32::adc::{Adc, SampleTime};
-use embassy_stm32::rcc::{AdcClockSource, Pll, PllMul, PllPreDiv, PllRDiv, Pllsrc, Sysclk};
 use embassy_stm32::Config;
 use embassy_time::{Delay, Timer};
 use {defmt_rtt as _, panic_probe as _};
@@ -12,20 +11,20 @@ use {defmt_rtt as _, panic_probe as _};
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {
     let mut config = Config::default();
-
-    config.rcc.pll = Some(Pll {
-        source: Pllsrc::HSI,
-        prediv: PllPreDiv::DIV4,
-        mul: PllMul::MUL85,
-        divp: None,
-        divq: None,
-        // Main system clock at 170 MHz
-        divr: Some(PllRDiv::DIV2),
-    });
-
-    config.rcc.adc12_clock_source = AdcClockSource::SYS;
-    config.rcc.sys = Sysclk::PLL1_R;
-
+    {
+        use embassy_stm32::rcc::*;
+        config.rcc.pll = Some(Pll {
+            source: Pllsrc::HSI,
+            prediv: PllPreDiv::DIV4,
+            mul: PllMul::MUL85,
+            divp: None,
+            divq: None,
+            // Main system clock at 170 MHz
+            divr: Some(PllRDiv::DIV2),
+        });
+        config.rcc.mux.adc12sel = mux::Adcsel::SYS;
+        config.rcc.sys = Sysclk::PLL1_R;
+    }
     let mut p = embassy_stm32::init(config);
     info!("Hello World!");
 
diff --git a/examples/stm32g4/src/bin/can.rs b/examples/stm32g4/src/bin/can.rs
index a41f765c1..7551b2a55 100644
--- a/examples/stm32g4/src/bin/can.rs
+++ b/examples/stm32g4/src/bin/can.rs
@@ -3,6 +3,7 @@
 use defmt::*;
 use embassy_executor::Spawner;
 use embassy_stm32::peripherals::*;
+use embassy_stm32::time::Hertz;
 use embassy_stm32::{bind_interrupts, can, Config};
 use embassy_time::Timer;
 use static_cell::StaticCell;
@@ -15,8 +16,24 @@ bind_interrupts!(struct Irqs {
 
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {
-    let config = Config::default();
-
+    let mut config = Config::default();
+    {
+        use embassy_stm32::rcc::*;
+        config.rcc.hse = Some(Hse {
+            freq: Hertz(24_000_000),
+            mode: HseMode::Oscillator,
+        });
+        config.rcc.pll = Some(Pll {
+            source: Pllsrc::HSE,
+            prediv: PllPreDiv::DIV6,
+            mul: PllMul::MUL85,
+            divp: None,
+            divq: Some(PllQDiv::DIV8), // 42.5 Mhz for fdcan.
+            divr: Some(PllRDiv::DIV2), // Main system clock at 170 MHz
+        });
+        config.rcc.mux.fdcansel = mux::Fdcansel::PLL1_Q;
+        config.rcc.sys = Sysclk::PLL1_R;
+    }
     let peripherals = embassy_stm32::init(config);
 
     let mut can = can::FdcanConfigurator::new(peripherals.FDCAN1, peripherals.PA11, peripherals.PA12, Irqs);
diff --git a/examples/stm32g4/src/bin/pll.rs b/examples/stm32g4/src/bin/pll.rs
index 5274de79d..2609abfa2 100644
--- a/examples/stm32g4/src/bin/pll.rs
+++ b/examples/stm32g4/src/bin/pll.rs
@@ -12,6 +12,7 @@ use {defmt_rtt as _, panic_probe as _};
 async fn main(_spawner: Spawner) {
     let mut config = Config::default();
 
+    config.rcc.hsi = true;
     config.rcc.pll = Some(Pll {
         source: Pllsrc::HSI,
         prediv: PllPreDiv::DIV4,
diff --git a/examples/stm32g4/src/bin/usb_serial.rs b/examples/stm32g4/src/bin/usb_serial.rs
index 989fef5b0..90caaae14 100644
--- a/examples/stm32g4/src/bin/usb_serial.rs
+++ b/examples/stm32g4/src/bin/usb_serial.rs
@@ -3,9 +3,6 @@
 
 use defmt::{panic, *};
 use embassy_executor::Spawner;
-use embassy_stm32::rcc::{
-    Clk48Src, Hse, HseMode, Hsi48Config, Pll, PllMul, PllPreDiv, PllQDiv, PllRDiv, Pllsrc, Sysclk,
-};
 use embassy_stm32::time::Hertz;
 use embassy_stm32::usb::{self, Driver, Instance};
 use embassy_stm32::{bind_interrupts, peripherals, Config};
@@ -22,38 +19,27 @@ bind_interrupts!(struct Irqs {
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {
     let mut config = Config::default();
-
-    // Change this to `false` to use the HSE clock source for the USB. This example assumes an 8MHz HSE.
-    const USE_HSI48: bool = true;
-
-    let plldivq = if USE_HSI48 { None } else { Some(PllQDiv::DIV6) };
-
-    config.rcc.hse = Some(Hse {
-        freq: Hertz(8_000_000),
-        mode: HseMode::Oscillator,
-    });
-
-    config.rcc.pll = Some(Pll {
-        source: Pllsrc::HSE,
-        prediv: PllPreDiv::DIV2,
-        mul: PllMul::MUL72,
-        divp: None,
-        divq: plldivq,
-        // Main system clock at 144 MHz
-        divr: Some(PllRDiv::DIV2),
-    });
-
-    config.rcc.sys = Sysclk::PLL1_R;
-    config.rcc.boost = true; // BOOST!
-
-    if USE_HSI48 {
+    {
+        use embassy_stm32::rcc::*;
         // Sets up the Clock Recovery System (CRS) to use the USB SOF to trim the HSI48 oscillator.
         config.rcc.hsi48 = Some(Hsi48Config { sync_from_usb: true });
-        config.rcc.clk48_src = Clk48Src::HSI48;
-    } else {
-        config.rcc.clk48_src = Clk48Src::PLL1_Q;
+        config.rcc.hse = Some(Hse {
+            freq: Hertz(8_000_000),
+            mode: HseMode::Oscillator,
+        });
+        config.rcc.pll = Some(Pll {
+            source: Pllsrc::HSE,
+            prediv: PllPreDiv::DIV2,
+            mul: PllMul::MUL72,
+            divp: None,
+            divq: Some(PllQDiv::DIV6), // 48mhz
+            divr: Some(PllRDiv::DIV2), // Main system clock at 144 MHz
+        });
+        config.rcc.sys = Sysclk::PLL1_R;
+        config.rcc.boost = true; // BOOST!
+        config.rcc.mux.clk48sel = mux::Clk48sel::HSI48;
+        //config.rcc.mux.clk48sel = mux::Clk48sel::PLL1_Q; // uncomment to use PLL1_Q instead.
     }
-
     let p = embassy_stm32::init(config);
 
     info!("Hello World!");
diff --git a/examples/stm32h5/src/bin/can.rs b/examples/stm32h5/src/bin/can.rs
index e5ccfe4f7..643df27f9 100644
--- a/examples/stm32h5/src/bin/can.rs
+++ b/examples/stm32h5/src/bin/can.rs
@@ -20,7 +20,7 @@ async fn main(_spawner: Spawner) {
         freq: embassy_stm32::time::Hertz(25_000_000),
         mode: rcc::HseMode::Oscillator,
     });
-    config.rcc.fdcan_clock_source = rcc::FdCanClockSource::HSE;
+    config.rcc.mux.fdcan12sel = rcc::mux::Fdcansel::HSE;
 
     let peripherals = embassy_stm32::init(config);
 
diff --git a/examples/stm32h5/src/bin/usb_serial.rs b/examples/stm32h5/src/bin/usb_serial.rs
index 208493d8c..83477c8fa 100644
--- a/examples/stm32h5/src/bin/usb_serial.rs
+++ b/examples/stm32h5/src/bin/usb_serial.rs
@@ -5,7 +5,7 @@ use defmt::{panic, *};
 use embassy_executor::Spawner;
 use embassy_stm32::time::Hertz;
 use embassy_stm32::usb::{Driver, Instance};
-use embassy_stm32::{bind_interrupts, pac, peripherals, usb, Config};
+use embassy_stm32::{bind_interrupts, peripherals, usb, Config};
 use embassy_usb::class::cdc_acm::{CdcAcmClass, State};
 use embassy_usb::driver::EndpointError;
 use embassy_usb::Builder;
@@ -41,15 +41,12 @@ async fn main(_spawner: Spawner) {
         config.rcc.apb3_pre = APBPrescaler::DIV4;
         config.rcc.sys = Sysclk::PLL1_P;
         config.rcc.voltage_scale = VoltageScale::Scale0;
+        config.rcc.mux.usbsel = mux::Usbsel::HSI48;
     }
     let p = embassy_stm32::init(config);
 
     info!("Hello World!");
 
-    pac::RCC.ccipr4().write(|w| {
-        w.set_usbsel(pac::rcc::vals::Usbsel::HSI48);
-    });
-
     // Create the driver, from the HAL.
     let driver = Driver::new(p.USB, Irqs, p.PA12, p.PA11);
 
diff --git a/examples/stm32h7/src/bin/adc.rs b/examples/stm32h7/src/bin/adc.rs
index f0278239f..a5594d10c 100644
--- a/examples/stm32h7/src/bin/adc.rs
+++ b/examples/stm32h7/src/bin/adc.rs
@@ -38,7 +38,7 @@ async fn main(_spawner: Spawner) {
         config.rcc.apb3_pre = APBPrescaler::DIV2; // 100 Mhz
         config.rcc.apb4_pre = APBPrescaler::DIV2; // 100 Mhz
         config.rcc.voltage_scale = VoltageScale::Scale1;
-        config.rcc.adc_clock_source = AdcClockSource::PLL2_P;
+        config.rcc.mux.adcsel = mux::Adcsel::PLL2_P;
     }
     let mut p = embassy_stm32::init(config);
 
diff --git a/examples/stm32h7/src/bin/can.rs b/examples/stm32h7/src/bin/can.rs
index e5ccfe4f7..13a6a5051 100644
--- a/examples/stm32h7/src/bin/can.rs
+++ b/examples/stm32h7/src/bin/can.rs
@@ -20,7 +20,7 @@ async fn main(_spawner: Spawner) {
         freq: embassy_stm32::time::Hertz(25_000_000),
         mode: rcc::HseMode::Oscillator,
     });
-    config.rcc.fdcan_clock_source = rcc::FdCanClockSource::HSE;
+    config.rcc.mux.fdcansel = rcc::mux::Fdcansel::HSE;
 
     let peripherals = embassy_stm32::init(config);
 
diff --git a/examples/stm32h7/src/bin/dac.rs b/examples/stm32h7/src/bin/dac.rs
index a9bf46de0..a6f969aba 100644
--- a/examples/stm32h7/src/bin/dac.rs
+++ b/examples/stm32h7/src/bin/dac.rs
@@ -40,7 +40,7 @@ fn main() -> ! {
         config.rcc.apb3_pre = APBPrescaler::DIV2; // 100 Mhz
         config.rcc.apb4_pre = APBPrescaler::DIV2; // 100 Mhz
         config.rcc.voltage_scale = VoltageScale::Scale1;
-        config.rcc.adc_clock_source = AdcClockSource::PLL2_P;
+        config.rcc.mux.adcsel = mux::Adcsel::PLL2_P;
     }
     let p = embassy_stm32::init(config);
 
diff --git a/examples/stm32h7/src/bin/dac_dma.rs b/examples/stm32h7/src/bin/dac_dma.rs
index d88bd838f..feec28993 100644
--- a/examples/stm32h7/src/bin/dac_dma.rs
+++ b/examples/stm32h7/src/bin/dac_dma.rs
@@ -42,7 +42,7 @@ async fn main(spawner: Spawner) {
         config.rcc.apb3_pre = APBPrescaler::DIV2; // 100 Mhz
         config.rcc.apb4_pre = APBPrescaler::DIV2; // 100 Mhz
         config.rcc.voltage_scale = VoltageScale::Scale1;
-        config.rcc.adc_clock_source = AdcClockSource::PLL2_P;
+        config.rcc.mux.adcsel = mux::Adcsel::PLL2_P;
     }
 
     // Initialize the board and obtain a Peripherals instance
diff --git a/examples/stm32l4/src/bin/adc.rs b/examples/stm32l4/src/bin/adc.rs
index 910944673..a9f4604aa 100644
--- a/examples/stm32l4/src/bin/adc.rs
+++ b/examples/stm32l4/src/bin/adc.rs
@@ -3,7 +3,7 @@
 
 use defmt::*;
 use embassy_stm32::adc::{Adc, Resolution};
-use embassy_stm32::pac;
+use embassy_stm32::Config;
 use embassy_time::Delay;
 use {defmt_rtt as _, panic_probe as _};
 
@@ -11,12 +11,12 @@ use {defmt_rtt as _, panic_probe as _};
 fn main() -> ! {
     info!("Hello World!");
 
-    pac::RCC.ccipr().modify(|w| {
-        w.set_adcsel(pac::rcc::vals::Adcsel::SYS);
-    });
-    pac::RCC.ahb2enr().modify(|w| w.set_adcen(true));
-
-    let p = embassy_stm32::init(Default::default());
+    let mut config = Config::default();
+    {
+        use embassy_stm32::rcc::*;
+        config.rcc.mux.adcsel = mux::Adcsel::SYS;
+    }
+    let p = embassy_stm32::init(config);
 
     let mut adc = Adc::new(p.ADC1, &mut Delay);
     //adc.enable_vref();