stm32/rcc: merge wl into l4/l5.

4 files changed, 72 insertions, 36 deletions

diff --git a/examples/stm32l4/src/bin/rtc.rs b/examples/stm32l4/src/bin/rtc.rs
index fec0a349d..69527c9ad 100644
--- a/examples/stm32l4/src/bin/rtc.rs
+++ b/examples/stm32l4/src/bin/rtc.rs
@@ -5,7 +5,6 @@
 use chrono::{NaiveDate, NaiveDateTime};
 use defmt::*;
 use embassy_executor::Spawner;
-use embassy_stm32::rcc::{ClockSrc, LsConfig, PLLSource, Pll, PllMul, PllPreDiv, PllRDiv};
 use embassy_stm32::rtc::{Rtc, RtcConfig};
 use embassy_stm32::time::Hertz;
 use embassy_stm32::Config;
@@ -15,17 +14,23 @@ use {defmt_rtt as _, panic_probe as _};
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {
     let mut config = Config::default();
-    config.rcc.mux = ClockSrc::PLL1_R;
-    config.rcc.hse = Some(Hertz::mhz(8));
-    config.rcc.pll = Some(Pll {
-        source: PLLSource::HSE,
-        prediv: PllPreDiv::DIV1,
-        mul: PllMul::MUL20,
-        divp: None,
-        divq: None,
-        divr: Some(PllRDiv::DIV2), // sysclk 80Mhz clock (8 / 1 * 20 / 2)
-    });
-    config.rcc.ls = LsConfig::default_lse();
+    {
+        use embassy_stm32::rcc::*;
+        config.rcc.mux = ClockSrc::PLL1_R;
+        config.rcc.hse = Some(Hse {
+            freq: Hertz::mhz(8),
+            mode: HseMode::Oscillator,
+        });
+        config.rcc.pll = Some(Pll {
+            source: PLLSource::HSE,
+            prediv: PllPreDiv::DIV1,
+            mul: PllMul::MUL20,
+            divp: None,
+            divq: None,
+            divr: Some(PllRDiv::DIV2), // sysclk 80Mhz clock (8 / 1 * 20 / 2)
+        });
+        config.rcc.ls = LsConfig::default_lse();
+    }
     let p = embassy_stm32::init(config);
 
     info!("Hello World!");
diff --git a/examples/stm32l4/src/bin/spe_adin1110_http_server.rs b/examples/stm32l4/src/bin/spe_adin1110_http_server.rs
index 3c9d2cfc0..f76b504a7 100644
--- a/examples/stm32l4/src/bin/spe_adin1110_http_server.rs
+++ b/examples/stm32l4/src/bin/spe_adin1110_http_server.rs
@@ -48,7 +48,6 @@ use embassy_net_adin1110::{self, Device, Runner, ADIN1110};
 use embedded_hal_bus::spi::ExclusiveDevice;
 use hal::gpio::Pull;
 use hal::i2c::Config as I2C_Config;
-use hal::rcc::{ClockSrc, PLLSource, Pll, PllMul, PllPreDiv, PllRDiv};
 use hal::spi::{Config as SPI_Config, Spi};
 use hal::time::Hertz;
 
@@ -74,20 +73,25 @@ async fn main(spawner: Spawner) {
     defmt::println!("Start main()");
 
     let mut config = embassy_stm32::Config::default();
-
-    // 80Mhz clock (Source: 8 / SrcDiv: 1 * PLLMul 20 / ClkDiv 2)
-    // 80MHz highest frequency for flash 0 wait.
-    config.rcc.mux = ClockSrc::PLL1_R;
-    config.rcc.hse = Some(Hertz::mhz(8));
-    config.rcc.pll = Some(Pll {
-        source: PLLSource::HSE,
-        prediv: PllPreDiv::DIV1,
-        mul: PllMul::MUL20,
-        divp: None,
-        divq: None,
-        divr: Some(PllRDiv::DIV2), // sysclk 80Mhz clock (8 / 1 * 20 / 2)
-    });
-    config.rcc.hsi48 = true; // needed for rng
+    {
+        use embassy_stm32::rcc::*;
+        // 80Mhz clock (Source: 8 / SrcDiv: 1 * PLLMul 20 / ClkDiv 2)
+        // 80MHz highest frequency for flash 0 wait.
+        config.rcc.mux = ClockSrc::PLL1_R;
+        config.rcc.hse = Some(Hse {
+            freq: Hertz::mhz(8),
+            mode: HseMode::Oscillator,
+        });
+        config.rcc.pll = Some(Pll {
+            source: PLLSource::HSE,
+            prediv: PllPreDiv::DIV1,
+            mul: PllMul::MUL20,
+            divp: None,
+            divq: None,
+            divr: Some(PllRDiv::DIV2), // sysclk 80Mhz clock (8 / 1 * 20 / 2)
+        });
+        config.rcc.hsi48 = true; // needed for rng
+    }
 
     let dp = embassy_stm32::init(config);
 
diff --git a/examples/stm32wl/src/bin/lora_lorawan.rs b/examples/stm32wl/src/bin/lora_lorawan.rs
index 8c789afbc..e26c274ad 100644
--- a/examples/stm32wl/src/bin/lora_lorawan.rs
+++ b/examples/stm32wl/src/bin/lora_lorawan.rs
@@ -12,7 +12,8 @@ use embassy_lora::LoraTimer;
 use embassy_stm32::gpio::{Level, Output, Pin, Speed};
 use embassy_stm32::rng::{self, Rng};
 use embassy_stm32::spi::Spi;
-use embassy_stm32::{bind_interrupts, pac, peripherals};
+use embassy_stm32::time::Hertz;
+use embassy_stm32::{bind_interrupts, peripherals};
 use embassy_time::Delay;
 use lora_phy::mod_params::*;
 use lora_phy::sx1261_2::SX1261_2;
@@ -33,11 +34,24 @@ bind_interrupts!(struct Irqs{
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {
     let mut config = embassy_stm32::Config::default();
-    config.rcc.mux = embassy_stm32::rcc::ClockSrc::HSE;
+    {
+        use embassy_stm32::rcc::*;
+        config.rcc.hse = Some(Hse {
+            freq: Hertz(32_000_000),
+            mode: HseMode::Bypass,
+        });
+        config.rcc.mux = ClockSrc::PLL1_R;
+        config.rcc.pll = Some(Pll {
+            source: PLLSource::HSE,
+            prediv: PllPreDiv::DIV2,
+            mul: PllMul::MUL6,
+            divp: None,
+            divq: Some(PllQDiv::DIV2), // PLL1_Q clock (32 / 2 * 6 / 2), used for RNG
+            divr: Some(PllRDiv::DIV2), // sysclk 48Mhz clock (32 / 2 * 6 / 2)
+        });
+    }
     let p = embassy_stm32::init(config);
 
-    pac::RCC.ccipr().modify(|w| w.set_rngsel(0b01));
-
     let spi = Spi::new_subghz(p.SUBGHZSPI, p.DMA1_CH1, p.DMA1_CH2);
 
     // Set CTRL1 and CTRL3 for high-power transmission, while CTRL2 acts as an RF switch between tx and rx
diff --git a/examples/stm32wl/src/bin/random.rs b/examples/stm32wl/src/bin/random.rs
index 70676c704..2cf7ef9d0 100644
--- a/examples/stm32wl/src/bin/random.rs
+++ b/examples/stm32wl/src/bin/random.rs
@@ -4,9 +4,9 @@
 
 use defmt::*;
 use embassy_executor::Spawner;
-use embassy_stm32::rcc::{ClockSrc, MSIRange};
 use embassy_stm32::rng::{self, Rng};
-use embassy_stm32::{bind_interrupts, pac, peripherals};
+use embassy_stm32::time::Hertz;
+use embassy_stm32::{bind_interrupts, peripherals};
 use {defmt_rtt as _, panic_probe as _};
 
 bind_interrupts!(struct Irqs{
@@ -16,11 +16,24 @@ bind_interrupts!(struct Irqs{
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {
     let mut config = embassy_stm32::Config::default();
-    config.rcc.mux = ClockSrc::MSI(MSIRange::RANGE32M);
+    {
+        use embassy_stm32::rcc::*;
+        config.rcc.hse = Some(Hse {
+            freq: Hertz(32_000_000),
+            mode: HseMode::Bypass,
+        });
+        config.rcc.mux = ClockSrc::PLL1_R;
+        config.rcc.pll = Some(Pll {
+            source: PLLSource::HSE,
+            prediv: PllPreDiv::DIV2,
+            mul: PllMul::MUL6,
+            divp: None,
+            divq: Some(PllQDiv::DIV2), // PLL1_Q clock (32 / 2 * 6 / 2), used for RNG
+            divr: Some(PllRDiv::DIV2), // sysclk 48Mhz clock (32 / 2 * 6 / 2)
+        });
+    }
     let p = embassy_stm32::init(config);
 
-    pac::RCC.ccipr().modify(|w| w.set_rngsel(0b11)); // msi
-
     info!("Hello World!");
 
     let mut rng = Rng::new(p.RNG, Irqs);