1 files changed, 67 insertions, 19 deletions

diff --git a/examples/stm32f4/src/bin/i2s_dma.rs b/examples/stm32f4/src/bin/i2s_dma.rs
index 68392847b..618717cc9 100644
--- a/examples/stm32f4/src/bin/i2s_dma.rs
+++ b/examples/stm32f4/src/bin/i2s_dma.rs
@@ -1,33 +1,81 @@
+// This example is written for an STM32F411 chip communicating with an external
+// PCM5102a DAC. Remap pins, change clock speeds, etc. as necessary for your own
+// hardware.
+//
+// NOTE: This example outputs potentially loud audio. Please run responsibly.
+
 #![no_std]
 #![no_main]
 
-use defmt::*;
 use embassy_executor::Spawner;
-use embassy_stm32::i2s::{Config, I2S};
+use embassy_stm32::i2s::{Config, Format, I2S};
 use embassy_stm32::time::Hertz;
 use {defmt_rtt as _, panic_probe as _};
 
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {
-    let p = embassy_stm32::init(Default::default());
-    info!("Hello World!");
-
-    let mut dma_buffer = [0x00_u16; 128];
-
-    let mut i2s = I2S::new_txonly(
-        p.SPI2,
-        p.PC3,  // sd
-        p.PB12, // ws
-        p.PB10, // ck
-        p.PC6,  // mck
-        p.DMA1_CH4,
+    let config = {
+        use embassy_stm32::rcc::*;
+
+        let mut config = embassy_stm32::Config::default();
+        config.rcc.hse = Some(Hse {
+            freq: Hertz::mhz(25),
+            mode: HseMode::Oscillator,
+        });
+        config.rcc.pll_src = PllSource::HSE;
+        config.rcc.pll = Some(Pll {
+            prediv: PllPreDiv::DIV25,
+            mul: PllMul::MUL192,
+            divp: Some(PllPDiv::DIV2),
+            divq: Some(PllQDiv::DIV4),
+            divr: None,
+        });
+        config.rcc.sys = Sysclk::PLL1_P;
+
+        config.rcc.ahb_pre = AHBPrescaler::DIV1;
+        config.rcc.apb1_pre = APBPrescaler::DIV2;
+        config.rcc.apb2_pre = APBPrescaler::DIV1;
+
+        config.rcc.plli2s = Some(Pll {
+            prediv: PllPreDiv::DIV25,
+            mul: PllMul::MUL384,
+            divp: None,
+            divq: None,
+            divr: Some(PllRDiv::DIV5),
+        });
+        config.enable_debug_during_sleep = true;
+
+        config
+    };
+
+    let p = embassy_stm32::init(config);
+
+    // stereo wavetable generation
+    let mut wavetable = [0u16; 1200];
+    for (i, frame) in wavetable.chunks_mut(2).enumerate() {
+        frame[0] = ((((i / 150) % 2) * 2048) as i16 - 1024) as u16; // 160 Hz square wave in left channel
+        frame[1] = ((((i / 100) % 2) * 2048) as i16 - 1024) as u16; // 240 Hz square wave in right channel
+    }
+
+    // i2s configuration
+    let mut dma_buffer = [0u16; 2400];
+
+    let mut i2s_config = Config::default();
+    i2s_config.format = Format::Data16Channel32;
+    i2s_config.master_clock = false;
+    let mut i2s = I2S::new_txonly_nomck(
+        p.SPI3,
+        p.PB5,  // sd
+        p.PA15, // ws
+        p.PB3,  // ck
+        p.DMA1_CH7,
         &mut dma_buffer,
-        Hertz(1_000_000),
-        Config::default(),
+        Hertz(48_000),
+        i2s_config,
     );
+    i2s.start();
 
-    for i in 0_u16.. {
-        i2s.write(&mut [i * 2; 64]).await.ok();
-        i2s.write(&mut [i * 2 + 1; 64]).await.ok();
+    loop {
+        i2s.write(&wavetable).await.ok();
     }
 }