diff options
| -rw-r--r-- | README.md | 7 |
1 files changed, 4 insertions, 3 deletions
| @@ -10,15 +10,16 @@ Working: | |||
| 10 | - Sending and receiving Ethernet frames. | 10 | - Sending and receiving Ethernet frames. |
| 11 | - Using the default MAC address. | 11 | - Using the default MAC address. |
| 12 | - [`embassy-net`](https://embassy.dev) integration. | 12 | - [`embassy-net`](https://embassy.dev) integration. |
| 13 | - RP2040 PIO driver for the nonstandard half-duplex SPI used in the Pico W. | ||
| 14 | - Using IRQ for device events | ||
| 15 | - GPIO support (for LED on the Pico W) | ||
| 13 | 16 | ||
| 14 | TODO: | 17 | TODO: |
| 15 | 18 | ||
| 16 | - AP mode (creating an AP) | 19 | - AP mode (creating an AP) |
| 17 | - GPIO support (used for the Pico W LED) | ||
| 18 | - Scanning | 20 | - Scanning |
| 19 | - Setting a custom MAC address. | 21 | - Setting a custom MAC address. |
| 20 | - RP2040 PIO driver for the nonstandard half-duplex SPI used in the Pico W. Probably porting [this](https://github.com/raspberrypi/pico-sdk/tree/master/src/rp2_common/cyw43_driver). (Currently bitbanging is used). | 22 | - Investigate why can [this](https://github.com/raspberrypi/pico-sdk/tree/master/src/rp2_common/pico_cyw43_driver) use higher PIO speed. |
| 21 | - Using the IRQ pin instead of polling the bus. | ||
| 22 | - Bus sleep (unclear what the benefit is. Is it needed for IRQs? or is it just power consumption optimization?) | 23 | - Bus sleep (unclear what the benefit is. Is it needed for IRQs? or is it just power consumption optimization?) |
| 23 | 24 | ||
| 24 | ## Running the example | 25 | ## Running the example |