19 files changed, 203 insertions, 69 deletions

diff --git a/embassy-stm32/src/rcc/f0.rs b/embassy-stm32/src/rcc/f0.rs
index 10b075da4..eb62ab661 100644
--- a/embassy-stm32/src/rcc/f0.rs
+++ b/embassy-stm32/src/rcc/f0.rs
@@ -3,7 +3,11 @@ use crate::pac::rcc::vals::{Hpre, Pllmul, Pllsrc, Ppre, Sw, Usbsw};
 use crate::pac::{FLASH, RCC};
 use crate::time::Hertz;
 
-const HSI: u32 = 8_000_000;
+/// HSI speed
+pub const HSI_FREQ: Hertz = Hertz(8_000_000);
+
+/// LSI speed
+pub const LSI_FREQ: Hertz = Hertz(40_000);
 
 /// Configuration of the clocks
 ///
@@ -24,14 +28,14 @@ pub struct Config {
 }
 
 pub(crate) unsafe fn init(config: Config) {
-    let sysclk = config.sys_ck.map(|v| v.0).unwrap_or(HSI);
+    let sysclk = config.sys_ck.map(|v| v.0).unwrap_or(HSI_FREQ.0);
 
     let (src_clk, use_hsi48) = config.hse.map(|v| (v.0, false)).unwrap_or_else(|| {
         #[cfg(not(stm32f0x0))]
         if config.hsi48 {
             return (48_000_000, true);
         }
-        (HSI, false)
+        (HSI_FREQ.0, false)
     });
 
     let (pllmul_bits, real_sysclk) = if sysclk == src_clk {
diff --git a/embassy-stm32/src/rcc/f1.rs b/embassy-stm32/src/rcc/f1.rs
index 8e2e6684a..e667dbf90 100644
--- a/embassy-stm32/src/rcc/f1.rs
+++ b/embassy-stm32/src/rcc/f1.rs
@@ -6,7 +6,11 @@ use crate::pac::rcc::vals::*;
 use crate::pac::{FLASH, RCC};
 use crate::time::Hertz;
 
-const HSI: u32 = 8_000_000;
+/// HSI speed
+pub const HSI_FREQ: Hertz = Hertz(8_000_000);
+
+/// LSI speed
+pub const LSI_FREQ: Hertz = Hertz(40_000);
 
 /// Configuration of the clocks
 ///
@@ -23,12 +27,12 @@ pub struct Config {
 }
 
 pub(crate) unsafe fn init(config: Config) {
-    let pllsrcclk = config.hse.map(|hse| hse.0).unwrap_or(HSI / 2);
+    let pllsrcclk = config.hse.map(|hse| hse.0).unwrap_or(HSI_FREQ.0 / 2);
     let sysclk = config.sys_ck.map(|sys| sys.0).unwrap_or(pllsrcclk);
     let pllmul = sysclk / pllsrcclk;
 
     let (pllmul_bits, real_sysclk) = if pllmul == 1 {
-        (None, config.hse.map(|hse| hse.0).unwrap_or(HSI))
+        (None, config.hse.map(|hse| hse.0).unwrap_or(HSI_FREQ.0))
     } else {
         let pllmul = core::cmp::min(core::cmp::max(pllmul, 1), 16);
         (Some(pllmul as u8 - 2), pllsrcclk * pllmul)
diff --git a/embassy-stm32/src/rcc/f2.rs b/embassy-stm32/src/rcc/f2.rs
index 65fa78f82..d543888c1 100644
--- a/embassy-stm32/src/rcc/f2.rs
+++ b/embassy-stm32/src/rcc/f2.rs
@@ -8,7 +8,10 @@ use crate::rcc::{set_freqs, Clocks};
 use crate::time::Hertz;
 
 /// HSI speed
-pub const HSI: Hertz = Hertz(16_000_000);
+pub const HSI_FREQ: Hertz = Hertz(16_000_000);
+
+/// LSI speed
+pub const LSI_FREQ: Hertz = Hertz(32_000);
 
 #[derive(Clone, Copy)]
 pub struct HSEConfig {
@@ -429,7 +432,7 @@ pub(crate) unsafe fn init(config: Config) {
                 .unwrap_or_else(|| panic!("HSE must be configured to be used as PLL input"));
             hse_config.frequency
         }
-        PLLSrc::HSI => HSI,
+        PLLSrc::HSI => HSI_FREQ,
     };
 
     // Reference: STM32F215xx/217xx datasheet Table 33. Main PLL characteristics
@@ -451,7 +454,7 @@ pub(crate) unsafe fn init(config: Config) {
     let (sys_clk, sw) = match config.mux {
         ClockSrc::HSI => {
             assert!(config.hsi, "HSI must be enabled to be used as system clock");
-            (HSI, Sw::HSI)
+            (HSI_FREQ, Sw::HSI)
         }
         ClockSrc::HSE => {
             let hse_config = config
diff --git a/embassy-stm32/src/rcc/f3.rs b/embassy-stm32/src/rcc/f3.rs
index c2aec04c4..2deee80d6 100644
--- a/embassy-stm32/src/rcc/f3.rs
+++ b/embassy-stm32/src/rcc/f3.rs
@@ -4,7 +4,11 @@ use crate::pac::{FLASH, RCC};
 use crate::rcc::{set_freqs, Clocks};
 use crate::time::Hertz;
 
-const HSI: u32 = 8_000_000;
+/// HSI speed
+pub const HSI_FREQ: Hertz = Hertz(8_000_000);
+
+/// LSI speed
+pub const LSI_FREQ: Hertz = Hertz(40_000);
 
 /// Clocks configutation
 #[non_exhaustive]
@@ -180,7 +184,7 @@ pub(crate) unsafe fn init(config: Config) {
 fn get_sysclk(config: &Config) -> (Hertz, Option<PllConfig>) {
     match (config.sysclk, config.hse) {
         (Some(sysclk), Some(hse)) if sysclk == hse => (hse, None),
-        (Some(sysclk), None) if sysclk.0 == HSI => (Hertz(HSI), None),
+        (Some(sysclk), None) if sysclk == HSI_FREQ => (HSI_FREQ, None),
         // If the user selected System clock is different from HSI or HSE
         // we will have to setup PLL clock source
         (Some(sysclk), _) => {
@@ -188,7 +192,7 @@ fn get_sysclk(config: &Config) -> (Hertz, Option<PllConfig>) {
             (sysclk, Some(pll_config))
         }
         (None, Some(hse)) => (hse, None),
-        (None, None) => (Hertz(HSI), None),
+        (None, None) => (HSI_FREQ, None),
     }
 }
 
@@ -228,15 +232,15 @@ fn calc_pll(config: &Config, Hertz(sysclk): Hertz) -> (Hertz, PllConfig) {
                         stm32f302xd, stm32f302xe, stm32f303xd,
                         stm32f303xe, stm32f398xe
                     ))] {
-                    let (multiplier, divisor) = get_mul_div(sysclk, HSI);
+                    let (multiplier, divisor) = get_mul_div(sysclk, HSI_FREQ.0);
                     (
-                        Hertz((HSI / divisor) * multiplier),
+                        Hertz((HSI_FREQ.0 / divisor) * multiplier),
                         Pllsrc::HSI_DIV_PREDIV,
                         into_pll_mul(multiplier),
                         Some(into_pre_div(divisor)),
                     )
                 } else {
-                    let pllsrcclk = HSI / 2;
+                    let pllsrcclk = HSI_FREQ.0 / 2;
                     let multiplier = sysclk / pllsrcclk;
                     assert!(multiplier <= 16);
                     (
diff --git a/embassy-stm32/src/rcc/f4.rs b/embassy-stm32/src/rcc/f4.rs
index 21f3ad15d..200bcce9c 100644
--- a/embassy-stm32/src/rcc/f4.rs
+++ b/embassy-stm32/src/rcc/f4.rs
@@ -4,7 +4,11 @@ use crate::pac::{FLASH, PWR, RCC};
 use crate::rcc::{set_freqs, Clocks};
 use crate::time::Hertz;
 
-const HSI: u32 = 16_000_000;
+/// HSI speed
+pub const HSI_FREQ: Hertz = Hertz(16_000_000);
+
+/// LSI speed
+pub const LSI_FREQ: Hertz = Hertz(32_000);
 
 /// Clocks configuration
 #[non_exhaustive]
@@ -108,7 +112,7 @@ unsafe fn flash_setup(sysclk: u32) {
 pub(crate) unsafe fn init(config: Config) {
     crate::peripherals::PWR::enable();
 
-    let pllsrcclk = config.hse.map(|hse| hse.0).unwrap_or(HSI);
+    let pllsrcclk = config.hse.map(|hse| hse.0).unwrap_or(HSI_FREQ.0);
     let sysclk = config.sys_ck.map(|sys| sys.0).unwrap_or(pllsrcclk);
     let sysclk_on_pll = sysclk != pllsrcclk;
 
diff --git a/embassy-stm32/src/rcc/f7.rs b/embassy-stm32/src/rcc/f7.rs
index d98aa4018..2d21326a3 100644
--- a/embassy-stm32/src/rcc/f7.rs
+++ b/embassy-stm32/src/rcc/f7.rs
@@ -5,7 +5,11 @@ use crate::pac::{FLASH, PWR, RCC};
 use crate::rcc::{set_freqs, Clocks};
 use crate::time::Hertz;
 
-const HSI: u32 = 16_000_000;
+/// HSI speed
+pub const HSI_FREQ: Hertz = Hertz(16_000_000);
+
+/// LSI speed
+pub const LSI_FREQ: Hertz = Hertz(32_000);
 
 /// Clocks configuration
 #[non_exhaustive]
@@ -117,7 +121,7 @@ pub(crate) unsafe fn init(config: Config) {
         }
     }
 
-    let pllsrcclk = config.hse.map(|hse| hse.0).unwrap_or(HSI);
+    let pllsrcclk = config.hse.map(|hse| hse.0).unwrap_or(HSI_FREQ.0);
     let sysclk = config.sys_ck.map(|sys| sys.0).unwrap_or(pllsrcclk);
     let sysclk_on_pll = sysclk != pllsrcclk;
 
diff --git a/embassy-stm32/src/rcc/g0.rs b/embassy-stm32/src/rcc/g0.rs
index 36b49c711..6bfae46bd 100644
--- a/embassy-stm32/src/rcc/g0.rs
+++ b/embassy-stm32/src/rcc/g0.rs
@@ -5,10 +5,10 @@ use crate::rcc::{set_freqs, Clocks};
 use crate::time::{Hertz, U32Ext};
 
 /// HSI speed
-pub const HSI_FREQ: u32 = 16_000_000;
+pub const HSI_FREQ: Hertz = Hertz(16_000_000);
 
 /// LSI speed
-pub const LSI_FREQ: u32 = 32_000;
+pub const LSI_FREQ: Hertz = Hertz(32_000);
 
 /// System clock mux source
 #[derive(Clone, Copy)]
@@ -248,7 +248,7 @@ impl PllConfig {
     pub(crate) unsafe fn init(self) -> u32 {
         assert!(self.n >= 8 && self.n <= 86);
         let (src, input_freq) = match self.source {
-            PllSrc::HSI16 => (vals::Pllsrc::HSI16, HSI_FREQ),
+            PllSrc::HSI16 => (vals::Pllsrc::HSI16, HSI_FREQ.0),
             PllSrc::HSE(freq) => (vals::Pllsrc::HSE, freq.0),
         };
 
@@ -344,7 +344,7 @@ pub(crate) unsafe fn init(config: Config) {
             });
             while !RCC.cr().read().hsirdy() {}
 
-            (HSI_FREQ >> div.0, Sw::HSI)
+            (HSI_FREQ.0 >> div.0, Sw::HSI)
         }
         ClockSrc::HSE(freq) => {
             // Enable HSE
@@ -361,7 +361,7 @@ pub(crate) unsafe fn init(config: Config) {
             // Enable LSI
             RCC.csr().write(|w| w.set_lsion(true));
             while !RCC.csr().read().lsirdy() {}
-            (LSI_FREQ, Sw::LSI)
+            (LSI_FREQ.0, Sw::LSI)
         }
     };
 
diff --git a/embassy-stm32/src/rcc/g4.rs b/embassy-stm32/src/rcc/g4.rs
index 2b8c2b576..d9c15727b 100644
--- a/embassy-stm32/src/rcc/g4.rs
+++ b/embassy-stm32/src/rcc/g4.rs
@@ -3,10 +3,10 @@ use crate::rcc::{set_freqs, Clocks};
 use crate::time::{Hertz, U32Ext};
 
 /// HSI speed
-pub const HSI_FREQ: u32 = 16_000_000;
+pub const HSI_FREQ: Hertz = Hertz(16_000_000);
 
 /// LSI speed
-pub const LSI_FREQ: u32 = 32_000;
+pub const LSI_FREQ: Hertz = Hertz(32_000);
 
 /// System clock mux source
 #[derive(Clone, Copy)]
@@ -96,7 +96,7 @@ pub(crate) unsafe fn init(config: Config) {
             RCC.cr().write(|w| w.set_hsion(true));
             while !RCC.cr().read().hsirdy() {}
 
-            (HSI_FREQ, 0x01)
+            (HSI_FREQ.0, 0x01)
         }
         ClockSrc::HSE(freq) => {
             // Enable HSE
diff --git a/embassy-stm32/src/rcc/h7.rs b/embassy-stm32/src/rcc/h7.rs
index 4fa01ade4..6b1014312 100644
--- a/embassy-stm32/src/rcc/h7.rs
+++ b/embassy-stm32/src/rcc/h7.rs
@@ -12,10 +12,17 @@ use crate::rcc::{set_freqs, Clocks};
 use crate::time::Hertz;
 use crate::{peripherals, Unborrow};
 
-const HSI: Hertz = Hertz(64_000_000);
-const CSI: Hertz = Hertz(4_000_000);
-const HSI48: Hertz = Hertz(48_000_000);
-const LSI: Hertz = Hertz(32_000);
+/// HSI speed
+pub const HSI_FREQ: Hertz = Hertz(64_000_000);
+
+/// CSI speed
+pub const CSI_FREQ: Hertz = Hertz(4_000_000);
+
+/// HSI48 speed
+pub const HSI48_FREQ: Hertz = Hertz(48_000_000);
+
+/// LSI speed
+pub const LSI_FREQ: Hertz = Hertz(32_000);
 
 /// Voltage Scale
 ///
@@ -461,7 +468,7 @@ pub(crate) unsafe fn init(mut config: Config) {
     // achieved, but the mechanism for doing so is not yet
     // implemented here.
 
-    let srcclk = config.hse.unwrap_or(HSI); // Available clocks
+    let srcclk = config.hse.unwrap_or(HSI_FREQ); // Available clocks
     let (sys_ck, sys_use_pll1_p) = sys_ck_setup(&mut config, srcclk);
 
     // Configure traceclk from PLL if needed
@@ -490,9 +497,9 @@ pub(crate) unsafe fn init(mut config: Config) {
 
     // per_ck from HSI by default
     let (per_ck, ckpersel) = match (config.per_ck == config.hse, config.per_ck) {
-        (true, Some(hse)) => (hse, Ckpersel::HSE), // HSE
-        (_, Some(CSI)) => (CSI, Ckpersel::CSI),    // CSI
-        _ => (HSI, Ckpersel::HSI),                 // HSI
+        (true, Some(hse)) => (hse, Ckpersel::HSE),        // HSE
+        (_, Some(CSI_FREQ)) => (CSI_FREQ, Ckpersel::CSI), // CSI
+        _ => (HSI_FREQ, Ckpersel::HSI),                   // HSI
     };
 
     // D1 Core Prescaler
@@ -664,10 +671,10 @@ pub(crate) unsafe fn init(mut config: Config) {
         ppre2,
         ppre3,
         ppre4,
-        csi_ck: Some(CSI),
-        hsi_ck: Some(HSI),
-        hsi48_ck: Some(HSI48),
-        lsi_ck: Some(LSI),
+        csi_ck: Some(CSI_FREQ),
+        hsi_ck: Some(HSI_FREQ),
+        hsi48_ck: Some(HSI48_FREQ),
+        lsi_ck: Some(LSI_FREQ),
         per_ck: Some(per_ck),
         hse_ck,
         pll1_p_ck: pll1_p_ck.map(Hertz),
diff --git a/embassy-stm32/src/rcc/l0.rs b/embassy-stm32/src/rcc/l0.rs
index 2e23833ca..2ca25aa2d 100644
--- a/embassy-stm32/src/rcc/l0.rs
+++ b/embassy-stm32/src/rcc/l0.rs
@@ -5,8 +5,11 @@ use crate::pac::{CRS, SYSCFG};
 use crate::rcc::{set_freqs, Clocks};
 use crate::time::{Hertz, U32Ext};
 
-/// HSI16 speed
-pub const HSI16_FREQ: u32 = 16_000_000;
+/// HSI speed
+pub const HSI_FREQ: Hertz = Hertz(16_000_000);
+
+/// LSI speed
+pub const LSI_FREQ: Hertz = Hertz(32_000);
 
 /// System clock mux source
 #[derive(Clone, Copy)]
@@ -217,7 +220,7 @@ pub(crate) unsafe fn init(config: Config) {
             RCC.cr().write(|w| w.set_hsi16on(true));
             while !RCC.cr().read().hsi16rdyf() {}
 
-            (HSI16_FREQ, Sw::HSI16)
+            (HSI_FREQ.0, Sw::HSI16)
         }
         ClockSrc::HSE(freq) => {
             // Enable HSE
@@ -238,7 +241,7 @@ pub(crate) unsafe fn init(config: Config) {
                     // Enable HSI
                     RCC.cr().write(|w| w.set_hsi16on(true));
                     while !RCC.cr().read().hsi16rdyf() {}
-                    HSI16_FREQ
+                    HSI_FREQ.0
                 }
             };
 
diff --git a/embassy-stm32/src/rcc/l1.rs b/embassy-stm32/src/rcc/l1.rs
index 80290632e..8c315f293 100644
--- a/embassy-stm32/src/rcc/l1.rs
+++ b/embassy-stm32/src/rcc/l1.rs
@@ -4,7 +4,10 @@ use crate::rcc::{set_freqs, Clocks};
 use crate::time::{Hertz, U32Ext};
 
 /// HSI speed
-pub const HSI_FREQ: u32 = 16_000_000;
+pub const HSI_FREQ: Hertz = Hertz(16_000_000);
+
+/// LSI speed
+pub const LSI_FREQ: Hertz = Hertz(32_000);
 
 /// System clock mux source
 #[derive(Clone, Copy)]
@@ -211,7 +214,7 @@ pub(crate) unsafe fn init(config: Config) {
             RCC.cr().write(|w| w.set_hsion(true));
             while !RCC.cr().read().hsirdy() {}
 
-            (HSI_FREQ, Sw::HSI)
+            (HSI_FREQ.0, Sw::HSI)
         }
         ClockSrc::HSE(freq) => {
             // Enable HSE
@@ -232,7 +235,7 @@ pub(crate) unsafe fn init(config: Config) {
                     // Enable HSI
                     RCC.cr().write(|w| w.set_hsion(true));
                     while !RCC.cr().read().hsirdy() {}
-                    HSI_FREQ
+                    HSI_FREQ.0
                 }
             };
 
diff --git a/embassy-stm32/src/rcc/l4.rs b/embassy-stm32/src/rcc/l4.rs
index 71a938550..fedfb0edc 100644
--- a/embassy-stm32/src/rcc/l4.rs
+++ b/embassy-stm32/src/rcc/l4.rs
@@ -3,8 +3,11 @@ use crate::pac::{FLASH, RCC};
 use crate::rcc::{set_freqs, Clocks};
 use crate::time::{Hertz, U32Ext};
 
-/// HSI16 speed
-pub const HSI16_FREQ: u32 = 16_000_000;
+/// HSI speed
+pub const HSI_FREQ: Hertz = Hertz(16_000_000);
+
+/// LSI speed
+pub const LSI_FREQ: Hertz = Hertz(32_000);
 
 /// System clock mux source
 #[derive(Clone, Copy)]
@@ -321,7 +324,7 @@ pub(crate) unsafe fn init(config: Config) {
             RCC.cr().write(|w| w.set_hsion(true));
             while !RCC.cr().read().hsirdy() {}
 
-            (HSI16_FREQ, Sw::HSI16)
+            (HSI_FREQ.0, Sw::HSI16)
         }
         ClockSrc::HSE(freq) => {
             // Enable HSE
@@ -342,7 +345,7 @@ pub(crate) unsafe fn init(config: Config) {
                     // Enable HSI
                     RCC.cr().write(|w| w.set_hsion(true));
                     while !RCC.cr().read().hsirdy() {}
-                    HSI16_FREQ
+                    HSI_FREQ.0
                 }
                 PLLSource::MSI(range) => {
                     // Enable MSI
diff --git a/embassy-stm32/src/rcc/l5.rs b/embassy-stm32/src/rcc/l5.rs
index 60e1dadea..edcdafe08 100644
--- a/embassy-stm32/src/rcc/l5.rs
+++ b/embassy-stm32/src/rcc/l5.rs
@@ -5,8 +5,11 @@ use crate::pac::{FLASH, RCC};
 use crate::rcc::{set_freqs, Clocks};
 use crate::time::{Hertz, U32Ext};
 
-/// HSI16 speed
-pub const HSI16_FREQ: u32 = 16_000_000;
+/// HSI speed
+pub const HSI_FREQ: Hertz = Hertz(16_000_000);
+
+/// LSI speed
+pub const LSI_FREQ: Hertz = Hertz(32_000);
 
 /// System clock mux source
 #[derive(Clone, Copy)]
@@ -322,7 +325,7 @@ pub(crate) unsafe fn init(config: Config) {
             RCC.cr().write(|w| w.set_hsion(true));
             while !RCC.cr().read().hsirdy() {}
 
-            (HSI16_FREQ, Sw::HSI16)
+            (HSI_FREQ.0, Sw::HSI16)
         }
         ClockSrc::HSE(freq) => {
             // Enable HSE
@@ -343,7 +346,7 @@ pub(crate) unsafe fn init(config: Config) {
                     // Enable HSI
                     RCC.cr().write(|w| w.set_hsion(true));
                     while !RCC.cr().read().hsirdy() {}
-                    HSI16_FREQ
+                    HSI_FREQ.0
                 }
                 PLLSource::MSI(range) => {
                     // Enable MSI
diff --git a/embassy-stm32/src/rcc/u5.rs b/embassy-stm32/src/rcc/u5.rs
index f09e467c6..701eeb893 100644
--- a/embassy-stm32/src/rcc/u5.rs
+++ b/embassy-stm32/src/rcc/u5.rs
@@ -4,8 +4,11 @@ use crate::pac::{FLASH, RCC};
 use crate::rcc::{set_freqs, Clocks};
 use crate::time::{Hertz, U32Ext};
 
-/// HSI16 speed
-pub const HSI16_FREQ: u32 = 16_000_000;
+/// HSI speed
+pub const HSI_FREQ: Hertz = Hertz(16_000_000);
+
+/// LSI speed
+pub const LSI_FREQ: Hertz = Hertz(32_000);
 
 /// Voltage Scale
 ///
@@ -333,13 +336,13 @@ pub(crate) unsafe fn init(config: Config) {
             RCC.cr().write(|w| w.set_hsion(true));
             while !RCC.cr().read().hsirdy() {}
 
-            HSI16_FREQ
+            HSI_FREQ.0
         }
         ClockSrc::PLL1R(src, m, n, div) => {
             let freq = match src {
                 PllSrc::MSI(_) => MSIRange::default().into(),
                 PllSrc::HSE(hertz) => hertz.0,
-                PllSrc::HSI16 => HSI16_FREQ,
+                PllSrc::HSI16 => HSI_FREQ.0,
             };
 
             // disable
diff --git a/embassy-stm32/src/rcc/wb.rs b/embassy-stm32/src/rcc/wb.rs
index d950e28f8..aec74c4b0 100644
--- a/embassy-stm32/src/rcc/wb.rs
+++ b/embassy-stm32/src/rcc/wb.rs
@@ -8,7 +8,10 @@ use crate::time::{Hertz, U32Ext};
 /// Only the basic setup using the HSE and HSI clocks are supported as of now.
 
 /// HSI speed
-pub const HSI_FREQ: u32 = 16_000_000;
+pub const HSI_FREQ: Hertz = Hertz(16_000_000);
+
+/// LSI speed
+pub const LSI_FREQ: Hertz = Hertz(32_000);
 
 /// System clock mux source
 #[derive(Clone, Copy)]
@@ -106,7 +109,7 @@ pub(crate) unsafe fn init(config: Config) {
             RCC.cr().write(|w| w.set_hsion(true));
             while !RCC.cr().read().hsirdy() {}
 
-            (HSI_FREQ, 0x01)
+            (HSI_FREQ.0, 0x01)
         }
         ClockSrc::HSE(freq) => {
             // Enable HSE
diff --git a/embassy-stm32/src/rcc/wl.rs b/embassy-stm32/src/rcc/wl.rs
index 1f2fbaf87..33ecaa361 100644
--- a/embassy-stm32/src/rcc/wl.rs
+++ b/embassy-stm32/src/rcc/wl.rs
@@ -1,6 +1,6 @@
 use crate::pac::{FLASH, RCC};
 use crate::rcc::{set_freqs, Clocks};
-use crate::time::U32Ext;
+use crate::time::{Hertz, U32Ext};
 
 /// Most of clock setup is copied from stm32l0xx-hal, and adopted to the generated PAC,
 /// and with the addition of the init function to configure a system clock.
@@ -8,9 +8,13 @@ use crate::time::U32Ext;
 /// Only the basic setup using the HSE and HSI clocks are supported as of now.
 
 /// HSI speed
-pub const HSI_FREQ: u32 = 16_000_000;
+pub const HSI_FREQ: Hertz = Hertz(16_000_000);
 
-pub const HSE32_FREQ: u32 = 32_000_000;
+/// LSI speed
+pub const LSI_FREQ: Hertz = Hertz(32_000);
+
+/// HSE32 speed
+pub const HSE32_FREQ: Hertz = Hertz(32_000_000);
 
 /// System clock mux source
 #[derive(Clone, Copy)]
@@ -203,7 +207,7 @@ pub(crate) unsafe fn init(config: Config) {
             RCC.cr().write(|w| w.set_hsion(true));
             while !RCC.cr().read().hsirdy() {}
 
-            (HSI_FREQ, 0x01, VoltageScale::Range2)
+            (HSI_FREQ.0, 0x01, VoltageScale::Range2)
         }
         ClockSrc::HSE32 => {
             // Enable HSE32
@@ -213,7 +217,7 @@ pub(crate) unsafe fn init(config: Config) {
             });
             while !RCC.cr().read().hserdy() {}
 
-            (HSE32_FREQ, 0x02, VoltageScale::Range1)
+            (HSE32_FREQ.0, 0x02, VoltageScale::Range1)
         }
         ClockSrc::MSI(range) => {
             RCC.cr().write(|w| {
diff --git a/embassy-stm32/src/wdg/mod.rs b/embassy-stm32/src/wdg/mod.rs
index da25692ab..c4b2609b1 100644
--- a/embassy-stm32/src/wdg/mod.rs
+++ b/embassy-stm32/src/wdg/mod.rs
@@ -1,21 +1,57 @@
 use core::marker::PhantomData;
 
 use embassy_hal_common::{unborrow, Unborrow};
-use stm32_metapac::iwdg::vals::Key;
-pub use stm32_metapac::iwdg::vals::Pr as Prescaler;
+use stm32_metapac::iwdg::vals::{Key, Pr};
+
+use crate::rcc::LSI_FREQ;
 
 pub struct IndependentWatchdog<'d, T: Instance> {
     wdg: PhantomData<&'d mut T>,
 }
 
+// 12-bit counter
+const MAX_RL: u16 = 0xFFF;
+
+/// Calculates maximum watchdog timeout in us (RL = 0xFFF) for a given prescaler
+const fn max_timeout(prescaler: u8) -> u32 {
+    1_000_000 * MAX_RL as u32 / (LSI_FREQ.0 / prescaler as u32)
+}
+
+/// Calculates watchdog reload value for the given prescaler and desired timeout
+const fn reload_value(prescaler: u8, timeout_us: u32) -> u16 {
+    (timeout_us / prescaler as u32 * LSI_FREQ.0 / 1_000_000) as u16
+}
+
 impl<'d, T: Instance> IndependentWatchdog<'d, T> {
-    pub fn new(_instance: impl Unborrow<Target = T> + 'd, presc: Prescaler) -> Self {
+    /// Creates an IWDG (Independent Watchdog) instance with a given timeout value in microseconds.
+    ///
+    /// [Self] has to be started with [Self::unleash()].
+    /// Once timer expires, MCU will be reset. To prevent this, timer must be reloaded by repeatedly calling [Self::pet()] within timeout interval.
+    pub fn new(_instance: impl Unborrow<Target = T> + 'd, timeout_us: u32) -> Self {
         unborrow!(_instance);
 
+        // Find lowest prescaler value, which makes watchdog period longer or equal to timeout.
+        // This iterates from 4 (2^2) to 256 (2^8).
+        let psc_power = unwrap!((2..=8).find(|psc_power| {
+            let psc = 2u8.pow(*psc_power);
+            timeout_us <= max_timeout(psc)
+        }));
+
+        // Prescaler value
+        let psc = 2u8.pow(psc_power);
+
+        // Convert prescaler power to PR register value
+        let pr = psc_power as u8 - 2;
+        assert!(pr <= 0b110);
+
+        // Reload value
+        let rl = reload_value(psc, timeout_us);
+
         let wdg = T::regs();
         unsafe {
             wdg.kr().write(|w| w.set_key(Key::ENABLE));
-            wdg.pr().write(|w| w.set_pr(presc));
+            wdg.pr().write(|w| w.set_pr(Pr(pr)));
+            wdg.rlr().write(|w| w.set_rl(rl));
         }
 
         IndependentWatchdog {
diff --git a/examples/stm32f4/src/bin/wdt.rs b/examples/stm32f4/src/bin/wdt.rs
new file mode 100644
index 000000000..bfc487c31
--- /dev/null
+++ b/examples/stm32f4/src/bin/wdt.rs
@@ -0,0 +1,46 @@
+#![no_std]
+#![no_main]
+#![feature(type_alias_impl_trait)]
+
+use defmt::*;
+use embassy::executor::Spawner;
+use embassy::time::{Duration, Timer};
+use embassy_stm32::gpio::{Level, Output, Speed};
+use embassy_stm32::wdg::IndependentWatchdog;
+use embassy_stm32::Peripherals;
+use {defmt_rtt as _, panic_probe as _};
+
+#[embassy::main]
+async fn main(_spawner: Spawner, p: Peripherals) {
+    info!("Hello World!");
+
+    let mut led = Output::new(p.PB7, Level::High, Speed::Low);
+
+    let mut wdt = IndependentWatchdog::new(p.IWDG, 1_000_000);
+    unsafe {
+        wdt.unleash();
+    }
+
+    let mut i = 0;
+
+    loop {
+        info!("high");
+        led.set_high();
+        Timer::after(Duration::from_millis(300)).await;
+
+        info!("low");
+        led.set_low();
+        Timer::after(Duration::from_millis(300)).await;
+
+        // Pet watchdog for 5 iterations and then stop.
+        // MCU should restart in 1 second after the last pet.
+        if i < 5 {
+            info!("Petting watchdog");
+            unsafe {
+                wdt.pet();
+            }
+        }
+
+        i += 1;
+    }
+}
diff --git a/stm32-data b/stm32-data
-Subproject 56d5b8b2aee7026b4f9bcffc427bb8f9d48afeb
+Subproject b90d7cf8cb0610e333e4eef7127ae8c51955860