7 files changed, 9 insertions, 9 deletions

diff --git a/docs/pages/basic_application.adoc b/docs/pages/basic_application.adoc
index 7b4ebda4f..5c4e3e8b3 100644
--- a/docs/pages/basic_application.adoc
+++ b/docs/pages/basic_application.adoc
@@ -4,7 +4,7 @@ So you've got one of the examples running, but what now? Let's go through a simp
 
 == Main
 
-The full example can be found link:https://github.com/embassy-rs/embassy/tree/master/docs/examples/basic[here].
+The full example can be found link:https://github.com/embassy-rs/embassy/tree/main/docs/examples/basic[here].
 
 NOTE: If you’re using VS Code and rust-analyzer to view and edit the examples, you may need to make some changes to `.vscode/settings.json` to tell it which project we’re working on. Follow the instructions commented in that file to get rust-analyzer working correctly.
 
diff --git a/docs/pages/new_project.adoc b/docs/pages/new_project.adoc
index 346d9f0f8..821bcbd27 100644
--- a/docs/pages/new_project.adoc
+++ b/docs/pages/new_project.adoc
@@ -1,6 +1,6 @@
 = Starting a new project
 
-Once you’ve successfully xref:getting_started.adoc[run some example projects], the next step is to make a standalone Embassy project.
+Once you’ve successfully xref:#_getting_started[run some example projects], the next step is to make a standalone Embassy project.
 
 == Tools for generating Embassy projects
 
diff --git a/docs/pages/nrf.adoc b/docs/pages/nrf.adoc
index 1706087ae..de052b63f 100644
--- a/docs/pages/nrf.adoc
+++ b/docs/pages/nrf.adoc
@@ -1,6 +1,6 @@
 = Embassy nRF HAL
 
-The link:https://github.com/embassy-rs/embassy/tree/master/embassy-nrf[Embassy nRF HAL] is based on the PACs (Peripheral Access Crate) from link:https://github.com/nrf-rs/[nrf-rs].
+The link:https://github.com/embassy-rs/embassy/tree/main/embassy-nrf[Embassy nRF HAL] is based on the PACs (Peripheral Access Crate) from link:https://github.com/nrf-rs/[nrf-rs].
 
 == Timer driver
 
diff --git a/docs/pages/overview.adoc b/docs/pages/overview.adoc
index 1b9381bfe..7d59d5521 100644
--- a/docs/pages/overview.adoc
+++ b/docs/pages/overview.adoc
@@ -48,7 +48,7 @@ link:https://github.com/lora-rs/lora-rs[lora-rs] supports LoRa networking on a w
 link:https://docs.embassy.dev/embassy-usb/[embassy-usb] implements a device-side USB stack. Implementations for common classes such as USB serial (CDC ACM) and USB HID are available, and a rich builder API allows building your own.
 
 === Bootloader and DFU
-link:https://github.com/embassy-rs/embassy/tree/master/embassy-boot[embassy-boot] is a lightweight bootloader supporting firmware application upgrades in a power-fail-safe way, with trial boots and rollbacks.
+link:https://github.com/embassy-rs/embassy/tree/main/embassy-boot[embassy-boot] is a lightweight bootloader supporting firmware application upgrades in a power-fail-safe way, with trial boots and rollbacks.
 
 == What is DMA?
 
diff --git a/docs/pages/sharing_peripherals.adoc b/docs/pages/sharing_peripherals.adoc
index 6ba13f93b..dfb8c1ffe 100644
--- a/docs/pages/sharing_peripherals.adoc
+++ b/docs/pages/sharing_peripherals.adoc
@@ -8,7 +8,7 @@ The following examples shows different ways to use the on-board LED on a Raspber
 
 Using mutual exclusion is the simplest way to share a peripheral.
 
-TIP: Dependencies needed to run this example link:/book/dev/basic_application.html#_the_cargo_toml[can be found here].
+TIP: Dependencies needed to run this example link:#_the_cargo_toml[can be found here].
 [,rust]
 ----
 use defmt::*;
@@ -78,7 +78,7 @@ To indicate that the pin will be set to an Output. The `AnyPin` could have been
 
 A channel is another way to ensure exclusive access to a resource. Using a channel is great in the cases where the access can happen at a later point in time, allowing you to enqueue operations and do other things.
 
-TIP: Dependencies needed to run this example link:/book/dev/basic_application.html#_the_cargo_toml[can be found here].
+TIP: Dependencies needed to run this example link:#_the_cargo_toml[can be found here].
 [,rust]
 ----
 use defmt::*;
diff --git a/docs/pages/stm32.adoc b/docs/pages/stm32.adoc
index 7bfc0592b..df139a420 100644
--- a/docs/pages/stm32.adoc
+++ b/docs/pages/stm32.adoc
@@ -1,6 +1,6 @@
 = Embassy STM32 HAL
 
-The link:https://github.com/embassy-rs/embassy/tree/master/embassy-stm32[Embassy STM32 HAL] is based on the `stm32-metapac` project.
+The link:https://github.com/embassy-rs/embassy/tree/main/embassy-stm32[Embassy STM32 HAL] is based on the `stm32-metapac` project.
 
 == The infinite variant problem
 
diff --git a/docs/pages/time_keeping.adoc b/docs/pages/time_keeping.adoc
index 17492a884..11ddb2b2b 100644
--- a/docs/pages/time_keeping.adoc
+++ b/docs/pages/time_keeping.adoc
@@ -16,7 +16,7 @@ The `embassy::time::Timer` type provides two timing methods.
 
 An example of a delay is provided as follows:
 
-TIP: Dependencies needed to run this example link:/book/dev/basic_application.html#_the_cargo_toml[can be found here].
+TIP: Dependencies needed to run this example link:#_the_cargo_toml[can be found here].
 [,rust]
 ----
 use embassy::executor::{task, Executor};
@@ -41,7 +41,7 @@ that expect a generic delay implementation to be provided.
 
 An example of how this can be used:
 
-TIP: Dependencies needed to run this example link:/book/dev/basic_application.html#_the_cargo_toml[can be found here].
+TIP: Dependencies needed to run this example link:#_the_cargo_toml[can be found here].
 [,rust]
 ----
 use embassy::executor::{task, Executor};