3 files changed, 149 insertions, 0 deletions

diff --git a/examples/mspm0l1306/src/bin/i2c.rs b/examples/mspm0l1306/src/bin/i2c.rs
new file mode 100644
index 000000000..e8801c485
--- /dev/null
+++ b/examples/mspm0l1306/src/bin/i2c.rs
@@ -0,0 +1,45 @@
+//! This example uses FIFO with polling, and the maximum FIFO size is 8.
+//! Refer to async example to handle larger packets.
+//!
+//! This example controls AD5171 digital potentiometer via I2C with the LP-MSPM0L1306 board.
+
+#![no_std]
+#![no_main]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_mspm0::i2c::{Config, I2c};
+use embassy_time::Timer;
+use {defmt_rtt as _, panic_halt as _};
+
+const ADDRESS: u8 = 0x2c;
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) -> ! {
+    let p = embassy_mspm0::init(Default::default());
+
+    let instance = p.I2C0;
+    let scl = p.PA1;
+    let sda = p.PA0;
+
+    let mut i2c = unwrap!(I2c::new_blocking(instance, scl, sda, Config::default()));
+
+    let mut pot_value: u8 = 0;
+
+    loop {
+        let to_write = [0u8, pot_value];
+
+        match i2c.blocking_write(ADDRESS, &to_write) {
+            Ok(()) => info!("New potentioemter value: {}", pot_value),
+            Err(e) => error!("I2c Error: {:?}", e),
+        }
+
+        pot_value += 1;
+        // if reached 64th position (max)
+        // start over from lowest value
+        if pot_value == 64 {
+            pot_value = 0;
+        }
+        Timer::after_millis(500).await;
+    }
+}
diff --git a/examples/mspm0l1306/src/bin/i2c_async.rs b/examples/mspm0l1306/src/bin/i2c_async.rs
new file mode 100644
index 000000000..c4a6938ff
--- /dev/null
+++ b/examples/mspm0l1306/src/bin/i2c_async.rs
@@ -0,0 +1,50 @@
+//! The example uses FIFO and interrupts, wrapped in async API.
+//!
+//! This example controls AD5171 digital potentiometer via I2C with the LP-MSPM0L1306 board.
+
+#![no_std]
+#![no_main]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_mspm0::bind_interrupts;
+use embassy_mspm0::i2c::{Config, I2c, InterruptHandler};
+use embassy_mspm0::peripherals::I2C0;
+use embassy_time::Timer;
+use {defmt_rtt as _, panic_halt as _};
+
+const ADDRESS: u8 = 0x6a;
+
+bind_interrupts!(struct Irqs {
+    I2C0 => InterruptHandler<I2C0>;
+});
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) -> ! {
+    let p = embassy_mspm0::init(Default::default());
+
+    let instance = p.I2C0;
+    let scl = p.PA1;
+    let sda = p.PA0;
+
+    let mut i2c = unwrap!(I2c::new_async(instance, scl, sda, Irqs, Config::default()));
+
+    let mut pot_value: u8 = 0;
+
+    loop {
+        let to_write = [0u8, pot_value];
+
+        match i2c.async_write(ADDRESS, &to_write).await {
+            Ok(()) => info!("New potentioemter value: {}", pot_value),
+            Err(e) => error!("I2c Error: {:?}", e),
+        }
+
+        pot_value += 1;
+        // if reached 64th position (max)
+        // start over from lowest value
+        if pot_value == 64 {
+            pot_value = 0;
+        }
+        Timer::after_millis(500).await;
+    }
+}
diff --git a/examples/mspm0l1306/src/bin/wwdt.rs b/examples/mspm0l1306/src/bin/wwdt.rs
new file mode 100644
index 000000000..b8fb1a1cd
--- /dev/null
+++ b/examples/mspm0l1306/src/bin/wwdt.rs
@@ -0,0 +1,54 @@
+//! Example of using window watchdog timer in the MSPM0L1306 chip.
+//!
+//! It tests the use case when watchdog timer is expired and when watchdog is pet too early.
+
+#![no_std]
+#![no_main]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_mspm0::gpio::{Level, Output};
+use embassy_mspm0::wwdt::{ClosedWindowPercentage, Config, Timeout, Watchdog};
+use embassy_time::Timer;
+use {defmt_rtt as _, panic_halt as _};
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) -> ! {
+    info!("Hello world!");
+
+    let p = embassy_mspm0::init(Default::default());
+    let mut conf = Config::default();
+    conf.timeout = Timeout::Sec1;
+
+    // watchdog also resets the system if the pet comes too early,
+    // less than 250 msec == 25% from 1 sec
+    conf.closed_window = ClosedWindowPercentage::TwentyFive;
+    let mut wdt = Watchdog::new(p.WWDT0, conf);
+    info!("Started the watchdog timer");
+
+    let mut led1 = Output::new(p.PA0, Level::High);
+    led1.set_inversion(true);
+    Timer::after_millis(900).await;
+
+    for _ in 1..=5 {
+        info!("pet watchdog");
+        led1.toggle();
+        wdt.pet();
+        Timer::after_millis(500).await;
+    }
+
+    // watchdog timeout test
+    info!("Stopped the pet command, device will reset in less than 1 second");
+    loop {
+        led1.toggle();
+        Timer::after_millis(500).await;
+    }
+
+    // watchdog "too early" test
+    // info!("Device will reset when the pet comes too early");
+    // loop {
+    //     led1.toggle();
+    //     wdt.pet();
+    //     Timer::after_millis(200).await;
+    // }
+}