1 files changed, 0 insertions, 102 deletions

diff --git a/examples/nrf52840/src/bin/lora_p2p_send.rs b/examples/nrf52840/src/bin/lora_p2p_send.rs
deleted file mode 100644
index 676221a27..000000000
--- a/examples/nrf52840/src/bin/lora_p2p_send.rs
+++ /dev/null
@@ -1,102 +0,0 @@
-//! This example runs on the RAK4631 WisBlock, which has an nRF52840 MCU and Semtech Sx126x radio.
-//! Other nrf/sx126x combinations may work with appropriate pin modifications.
-//! It demonstrates LORA P2P send functionality.
-#![no_std]
-#![no_main]
-#![macro_use]
-#![feature(type_alias_impl_trait)]
-
-use defmt::*;
-use embassy_executor::Spawner;
-use embassy_lora::iv::GenericSx126xInterfaceVariant;
-use embassy_nrf::gpio::{Input, Level, Output, OutputDrive, Pin as _, Pull};
-use embassy_nrf::{bind_interrupts, peripherals, spim};
-use embassy_time::Delay;
-use lora_phy::mod_params::*;
-use lora_phy::sx1261_2::SX1261_2;
-use lora_phy::LoRa;
-use {defmt_rtt as _, panic_probe as _};
-
-const LORA_FREQUENCY_IN_HZ: u32 = 903_900_000; // warning: set this appropriately for the region
-
-bind_interrupts!(struct Irqs {
-    SPIM1_SPIS1_TWIM1_TWIS1_SPI1_TWI1 => spim::InterruptHandler<peripherals::TWISPI1>;
-});
-
-#[embassy_executor::main]
-async fn main(_spawner: Spawner) {
-    let p = embassy_nrf::init(Default::default());
-    let mut spi_config = spim::Config::default();
-    spi_config.frequency = spim::Frequency::M16;
-
-    let spim = spim::Spim::new(p.TWISPI1, Irqs, p.P1_11, p.P1_13, p.P1_12, spi_config);
-
-    let nss = Output::new(p.P1_10.degrade(), Level::High, OutputDrive::Standard);
-    let reset = Output::new(p.P1_06.degrade(), Level::High, OutputDrive::Standard);
-    let dio1 = Input::new(p.P1_15.degrade(), Pull::Down);
-    let busy = Input::new(p.P1_14.degrade(), Pull::Down);
-    let rf_switch_rx = Output::new(p.P1_05.degrade(), Level::Low, OutputDrive::Standard);
-    let rf_switch_tx = Output::new(p.P1_07.degrade(), Level::Low, OutputDrive::Standard);
-
-    let iv =
-        GenericSx126xInterfaceVariant::new(nss, reset, dio1, busy, Some(rf_switch_rx), Some(rf_switch_tx)).unwrap();
-
-    let mut lora = {
-        match LoRa::new(SX1261_2::new(BoardType::Rak4631Sx1262, spim, iv), false, Delay).await {
-            Ok(l) => l,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    let mdltn_params = {
-        match lora.create_modulation_params(
-            SpreadingFactor::_10,
-            Bandwidth::_250KHz,
-            CodingRate::_4_8,
-            LORA_FREQUENCY_IN_HZ,
-        ) {
-            Ok(mp) => mp,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    let mut tx_pkt_params = {
-        match lora.create_tx_packet_params(4, false, true, false, &mdltn_params) {
-            Ok(pp) => pp,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    match lora.prepare_for_tx(&mdltn_params, 20, false).await {
-        Ok(()) => {}
-        Err(err) => {
-            info!("Radio error = {}", err);
-            return;
-        }
-    };
-
-    let buffer = [0x01u8, 0x02u8, 0x03u8];
-    match lora.tx(&mdltn_params, &mut tx_pkt_params, &buffer, 0xffffff).await {
-        Ok(()) => {
-            info!("TX DONE");
-        }
-        Err(err) => {
-            info!("Radio error = {}", err);
-            return;
-        }
-    };
-
-    match lora.sleep(false).await {
-        Ok(()) => info!("Sleep successful"),
-        Err(err) => info!("Sleep unsuccessful = {}", err),
-    }
-}