1 files changed, 134 insertions, 0 deletions

diff --git a/examples/rp235x/src/bin/ethernet_w5500_icmp_ping.rs b/examples/rp235x/src/bin/ethernet_w5500_icmp_ping.rs
new file mode 100644
index 000000000..1f799a6b0
--- /dev/null
+++ b/examples/rp235x/src/bin/ethernet_w5500_icmp_ping.rs
@@ -0,0 +1,134 @@
+//! This example implements a LAN ping scan with the ping utilities in the icmp module of embassy-net.
+//!
+//! Example written for the [`WIZnet W5500-EVB-Pico2`](https://docs.wiznet.io/Product/iEthernet/W5500/w5500-evb-pico2) board.
+
+#![no_std]
+#![no_main]
+
+use core::net::Ipv4Addr;
+use core::ops::Not;
+use core::str::FromStr;
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_futures::yield_now;
+use embassy_net::icmp::ping::{PingManager, PingParams};
+use embassy_net::icmp::PacketMetadata;
+use embassy_net::{Ipv4Cidr, Stack, StackResources};
+use embassy_net_wiznet::chip::W5500;
+use embassy_net_wiznet::*;
+use embassy_rp::clocks::RoscRng;
+use embassy_rp::gpio::{Input, Level, Output, Pull};
+use embassy_rp::peripherals::SPI0;
+use embassy_rp::spi::{Async, Config as SpiConfig, Spi};
+use embassy_time::{Delay, Duration};
+use embedded_hal_bus::spi::ExclusiveDevice;
+use static_cell::StaticCell;
+use {defmt_rtt as _, panic_probe as _};
+
+type ExclusiveSpiDevice = ExclusiveDevice<Spi<'static, SPI0, Async>, Output<'static>, Delay>;
+
+#[embassy_executor::task]
+async fn ethernet_task(runner: Runner<'static, W5500, ExclusiveSpiDevice, Input<'static>, Output<'static>>) -> ! {
+    runner.run().await
+}
+
+#[embassy_executor::task]
+async fn net_task(mut runner: embassy_net::Runner<'static, Device<'static>>) -> ! {
+    runner.run().await
+}
+
+#[embassy_executor::main]
+async fn main(spawner: Spawner) {
+    let p = embassy_rp::init(Default::default());
+    let mut rng = RoscRng;
+
+    let mut spi_cfg = SpiConfig::default();
+    spi_cfg.frequency = 50_000_000;
+    let (miso, mosi, clk) = (p.PIN_16, p.PIN_19, p.PIN_18);
+    let spi = Spi::new(p.SPI0, clk, mosi, miso, p.DMA_CH0, p.DMA_CH1, spi_cfg);
+    let cs = Output::new(p.PIN_17, Level::High);
+    let w5500_int = Input::new(p.PIN_21, Pull::Up);
+    let w5500_reset = Output::new(p.PIN_20, Level::High);
+
+    let mac_addr = [0x02, 0x00, 0x00, 0x00, 0x00, 0x00];
+    static STATE: StaticCell<State<8, 8>> = StaticCell::new();
+    let state = STATE.init(State::<8, 8>::new());
+    let (device, runner) = embassy_net_wiznet::new(
+        mac_addr,
+        state,
+        ExclusiveDevice::new(spi, cs, Delay),
+        w5500_int,
+        w5500_reset,
+    )
+    .await
+    .unwrap();
+    unwrap!(spawner.spawn(ethernet_task(runner)));
+
+    // Generate random seed
+    let seed = rng.next_u64();
+
+    // Init network stack
+    static RESOURCES: StaticCell<StackResources<3>> = StaticCell::new();
+    let (stack, runner) = embassy_net::new(
+        device,
+        embassy_net::Config::dhcpv4(Default::default()),
+        RESOURCES.init(StackResources::new()),
+        seed,
+    );
+
+    // Launch network task
+    unwrap!(spawner.spawn(net_task(runner)));
+
+    info!("Waiting for DHCP...");
+    let cfg = wait_for_config(stack).await;
+    let local_addr = cfg.address.address();
+    info!("IP address: {:?}", local_addr);
+    let gateway = cfg.gateway.unwrap();
+    let mask = cfg.address.netmask();
+    let lower_bound = (gateway.to_bits() & mask.to_bits()) + 1;
+    let upper_bound = gateway.to_bits() | mask.to_bits().not();
+    let addr_range = lower_bound..=upper_bound;
+
+    // Then we can use it!
+    let mut rx_buffer = [0; 256];
+    let mut tx_buffer = [0; 256];
+    let mut rx_meta = [PacketMetadata::EMPTY];
+    let mut tx_meta = [PacketMetadata::EMPTY];
+
+    // Create the ping manager instance
+    let mut ping_manager = PingManager::new(stack, &mut rx_meta, &mut rx_buffer, &mut tx_meta, &mut tx_buffer);
+    let addr = "192.168.8.1"; // Address to ping to
+                              // Create the PingParams with the target address
+    let mut ping_params = PingParams::new(Ipv4Addr::from_str(addr).unwrap());
+    // (optional) Set custom properties of the ping
+    ping_params.set_payload(b"Hello, Ping!"); // custom payload
+    ping_params.set_count(1); // ping 1 times per ping call
+    ping_params.set_timeout(Duration::from_millis(500)); // wait .5 seconds instead of 4
+
+    info!("Online hosts in {}:", Ipv4Cidr::from_netmask(gateway, mask).unwrap());
+    let mut total_online_hosts = 0u32;
+    for addr in addr_range {
+        let ip_addr = Ipv4Addr::from_bits(addr);
+        // Set the target address in the ping params
+        ping_params.set_target(ip_addr);
+        // Execute the ping with the given parameters and wait for the reply
+        match ping_manager.ping(&ping_params).await {
+            Ok(time) => {
+                info!("{} is online\n- latency: {}ms\n", ip_addr, time.as_millis());
+                total_online_hosts += 1;
+            }
+            _ => continue,
+        }
+    }
+    info!("Ping scan complete, total online hosts: {}", total_online_hosts);
+}
+
+async fn wait_for_config(stack: Stack<'static>) -> embassy_net::StaticConfigV4 {
+    loop {
+        if let Some(config) = stack.config_v4() {
+            return config.clone();
+        }
+        yield_now().await;
+    }
+}