3 files changed, 9 insertions, 11 deletions

diff --git a/examples/stm32h7/src/bin/eth_client.rs b/examples/stm32h7/src/bin/eth_client.rs
index aeb169e19..0639fb99f 100644
--- a/examples/stm32h7/src/bin/eth_client.rs
+++ b/examples/stm32h7/src/bin/eth_client.rs
@@ -64,10 +64,10 @@ async fn main(spawner: Spawner) -> ! {
 
     let mac_addr = [0x00, 0x00, 0xDE, 0xAD, 0xBE, 0xEF];
 
-    static PACKETS: StaticCell<PacketQueue<16, 16>> = StaticCell::new();
+    static PACKETS: StaticCell<PacketQueue<4, 4>> = StaticCell::new();
 
     let device = Ethernet::new(
-        PACKETS.init(PacketQueue::<16, 16>::new()),
+        PACKETS.init(PacketQueue::<4, 4>::new()),
         p.ETH,
         Irqs,
         p.PA1,
diff --git a/examples/stm32h7/src/bin/eth_client_mii.rs b/examples/stm32h7/src/bin/eth_client_mii.rs
index de6ea522a..9a52e8d3b 100644
--- a/examples/stm32h7/src/bin/eth_client_mii.rs
+++ b/examples/stm32h7/src/bin/eth_client_mii.rs
@@ -64,10 +64,10 @@ async fn main(spawner: Spawner) -> ! {
 
     let mac_addr = [0x00, 0x00, 0xDE, 0xAD, 0xBE, 0xEF];
 
-    static PACKETS: StaticCell<PacketQueue<16, 16>> = StaticCell::new();
+    static PACKETS: StaticCell<PacketQueue<4, 4>> = StaticCell::new();
 
     let device = Ethernet::new_mii(
-        PACKETS.init(PacketQueue::<16, 16>::new()),
+        PACKETS.init(PacketQueue::<4, 4>::new()),
         p.ETH,
         Irqs,
         p.PA1,
diff --git a/examples/stm32h7/src/bin/usb_serial.rs b/examples/stm32h7/src/bin/usb_serial.rs
index 71d0c0a25..1c50fc1c8 100644
--- a/examples/stm32h7/src/bin/usb_serial.rs
+++ b/examples/stm32h7/src/bin/usb_serial.rs
@@ -53,13 +53,11 @@ async fn main(_spawner: Spawner) {
     let mut ep_out_buffer = [0u8; 256];
     let mut config = embassy_stm32::usb::Config::default();
 
-    // Enable vbus_detection
-    // Note: some boards don't have this wired up and might not require it,
-    // as they are powered through usb!
-    // If you hang on boot, try setting this to "false"!
-    // See https://embassy.dev/book/dev/faq.html#_the_usb_examples_are_not_working_on_my_board_is_there_anything_else_i_need_to_configure
-    // for more information
-    config.vbus_detection = true;
+    // Do not enable vbus_detection. This is a safe default that works in all boards.
+    // However, if your USB device is self-powered (can stay powered on if USB is unplugged), you need
+    // to enable vbus_detection to comply with the USB spec. If you enable it, the board
+    // has to support it or USB won't work at all. See docs on `vbus_detection` for details.
+    config.vbus_detection = false;
 
     let driver = Driver::new_fs(p.USB_OTG_FS, Irqs, p.PA12, p.PA11, &mut ep_out_buffer, config);