4 files changed, 10 insertions, 10 deletions

diff --git a/examples/stm32l4/src/bin/blinky.rs b/examples/stm32l4/src/bin/blinky.rs
index 033292fff..6202fe2f7 100644
--- a/examples/stm32l4/src/bin/blinky.rs
+++ b/examples/stm32l4/src/bin/blinky.rs
@@ -5,7 +5,7 @@
 use defmt::*;
 use embassy_executor::Spawner;
 use embassy_stm32::gpio::{Level, Output, Speed};
-use embassy_time::{Duration, Timer};
+use embassy_time::Timer;
 use {defmt_rtt as _, panic_probe as _};
 
 #[embassy_executor::main]
@@ -17,8 +17,8 @@ async fn main(_spawner: Spawner) {
 
     loop {
         led.set_high();
-        Timer::after(Duration::from_millis(300)).await;
+        Timer::after_millis(300).await;
         led.set_low();
-        Timer::after(Duration::from_millis(300)).await;
+        Timer::after_millis(300).await;
     }
 }
diff --git a/examples/stm32l4/src/bin/mco.rs b/examples/stm32l4/src/bin/mco.rs
index 8d35af781..2833bb636 100644
--- a/examples/stm32l4/src/bin/mco.rs
+++ b/examples/stm32l4/src/bin/mco.rs
@@ -6,7 +6,7 @@ use defmt::*;
 use embassy_executor::Spawner;
 use embassy_stm32::gpio::{Level, Output, Speed};
 use embassy_stm32::rcc::{Mco, McoPrescaler, McoSource};
-use embassy_time::{Duration, Timer};
+use embassy_time::Timer;
 use {defmt_rtt as _, panic_probe as _};
 
 #[embassy_executor::main]
@@ -20,8 +20,8 @@ async fn main(_spawner: Spawner) {
 
     loop {
         led.set_high();
-        Timer::after(Duration::from_millis(300)).await;
+        Timer::after_millis(300).await;
         led.set_low();
-        Timer::after(Duration::from_millis(300)).await;
+        Timer::after_millis(300).await;
     }
 }
diff --git a/examples/stm32l4/src/bin/rtc.rs b/examples/stm32l4/src/bin/rtc.rs
index 33efc76b3..f5d46e95f 100644
--- a/examples/stm32l4/src/bin/rtc.rs
+++ b/examples/stm32l4/src/bin/rtc.rs
@@ -9,7 +9,7 @@ use embassy_stm32::rcc::{ClockSrc, LsConfig, PLLSource, PllMul, PllPreDiv, PllRD
 use embassy_stm32::rtc::{Rtc, RtcConfig};
 use embassy_stm32::time::Hertz;
 use embassy_stm32::Config;
-use embassy_time::{Duration, Timer};
+use embassy_time::Timer;
 use {defmt_rtt as _, panic_probe as _};
 
 #[embassy_executor::main]
@@ -39,7 +39,7 @@ async fn main(_spawner: Spawner) {
     rtc.set_datetime(now.into()).expect("datetime not set");
 
     // In reality the delay would be much longer
-    Timer::after(Duration::from_millis(20000)).await;
+    Timer::after_millis(20000).await;
 
     let then: NaiveDateTime = rtc.now().unwrap().into();
     info!("Got RTC! {:?}", then.timestamp());
diff --git a/examples/stm32l4/src/bin/spe_adin1110_http_server.rs b/examples/stm32l4/src/bin/spe_adin1110_http_server.rs
index 7193d1f1f..e2ac22d09 100644
--- a/examples/stm32l4/src/bin/spe_adin1110_http_server.rs
+++ b/examples/stm32l4/src/bin/spe_adin1110_http_server.rs
@@ -306,7 +306,7 @@ async fn temp_task(temp_dev_i2c: TempSensI2c, mut led: Output<'static, periphera
 
     loop {
         led.set_low();
-        match select(temp_sens.read_temp(), Timer::after(Duration::from_millis(500))).await {
+        match select(temp_sens.read_temp(), Timer::after_millis(500)).await {
             Either::First(i2c_ret) => match i2c_ret {
                 Ok(value) => {
                     led.set_high();
@@ -424,7 +424,7 @@ where
         // Start: One shot
         let cfg = 0b01 << 5;
         self.write_cfg(cfg).await?;
-        Timer::after(Duration::from_millis(250)).await;
+        Timer::after_millis(250).await;
         self.bus
             .write_read(self.addr, &[Registers::Temp_MSB as u8], &mut buffer)
             .await