1 files changed, 0 insertions, 116 deletions

diff --git a/examples/stm32wl/src/bin/lora_p2p_send.rs b/examples/stm32wl/src/bin/lora_p2p_send.rs
deleted file mode 100644
index 7fe8cea3e..000000000
--- a/examples/stm32wl/src/bin/lora_p2p_send.rs
+++ /dev/null
@@ -1,116 +0,0 @@
-//! This example runs on a STM32WL board, which has a builtin Semtech Sx1262 radio.
-//! It demonstrates LORA P2P send functionality.
-#![no_std]
-#![no_main]
-#![macro_use]
-#![feature(type_alias_impl_trait, async_fn_in_trait)]
-#![allow(stable_features, unknown_lints, async_fn_in_trait)]
-
-use defmt::info;
-use embassy_executor::Spawner;
-use embassy_lora::iv::{InterruptHandler, Stm32wlInterfaceVariant};
-use embassy_stm32::bind_interrupts;
-use embassy_stm32::gpio::{Level, Output, Pin, Speed};
-use embassy_stm32::spi::Spi;
-use embassy_stm32::time::Hertz;
-use embassy_time::Delay;
-use lora_phy::mod_params::*;
-use lora_phy::sx1261_2::SX1261_2;
-use lora_phy::LoRa;
-use {defmt_rtt as _, panic_probe as _};
-
-const LORA_FREQUENCY_IN_HZ: u32 = 903_900_000; // warning: set this appropriately for the region
-
-bind_interrupts!(struct Irqs{
-    SUBGHZ_RADIO => InterruptHandler;
-});
-
-#[embassy_executor::main]
-async fn main(_spawner: Spawner) {
-    let mut config = embassy_stm32::Config::default();
-    {
-        use embassy_stm32::rcc::*;
-        config.rcc.hse = Some(Hse {
-            freq: Hertz(32_000_000),
-            mode: HseMode::Bypass,
-            prescaler: HsePrescaler::DIV1,
-        });
-        config.rcc.mux = ClockSrc::PLL1_R;
-        config.rcc.pll = Some(Pll {
-            source: PllSource::HSE,
-            prediv: PllPreDiv::DIV2,
-            mul: PllMul::MUL6,
-            divp: None,
-            divq: Some(PllQDiv::DIV2), // PLL1_Q clock (32 / 2 * 6 / 2), used for RNG
-            divr: Some(PllRDiv::DIV2), // sysclk 48Mhz clock (32 / 2 * 6 / 2)
-        });
-    }
-    let p = embassy_stm32::init(config);
-
-    let spi = Spi::new_subghz(p.SUBGHZSPI, p.DMA1_CH1, p.DMA1_CH2);
-
-    // Set CTRL1 and CTRL3 for high-power transmission, while CTRL2 acts as an RF switch between tx and rx
-    let _ctrl1 = Output::new(p.PC4.degrade(), Level::Low, Speed::High);
-    let ctrl2 = Output::new(p.PC5.degrade(), Level::High, Speed::High);
-    let _ctrl3 = Output::new(p.PC3.degrade(), Level::High, Speed::High);
-    let iv = Stm32wlInterfaceVariant::new(Irqs, None, Some(ctrl2)).unwrap();
-
-    let mut lora = {
-        match LoRa::new(SX1261_2::new(BoardType::Stm32wlSx1262, spi, iv), false, Delay).await {
-            Ok(l) => l,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    let mdltn_params = {
-        match lora.create_modulation_params(
-            SpreadingFactor::_10,
-            Bandwidth::_250KHz,
-            CodingRate::_4_8,
-            LORA_FREQUENCY_IN_HZ,
-        ) {
-            Ok(mp) => mp,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    let mut tx_pkt_params = {
-        match lora.create_tx_packet_params(4, false, true, false, &mdltn_params) {
-            Ok(pp) => pp,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    match lora.prepare_for_tx(&mdltn_params, 20, false).await {
-        Ok(()) => {}
-        Err(err) => {
-            info!("Radio error = {}", err);
-            return;
-        }
-    };
-
-    let buffer = [0x01u8, 0x02u8, 0x03u8];
-    match lora.tx(&mdltn_params, &mut tx_pkt_params, &buffer, 0xffffff).await {
-        Ok(()) => {
-            info!("TX DONE");
-        }
-        Err(err) => {
-            info!("Radio error = {}", err);
-            return;
-        }
-    };
-
-    match lora.sleep(false).await {
-        Ok(()) => info!("Sleep successful"),
-        Err(err) => info!("Sleep unsuccessful = {}", err),
-    }
-}