12 files changed, 107 insertions, 85 deletions

diff --git a/examples/stm32f4/src/bin/usb_ethernet.rs b/examples/stm32f4/src/bin/usb_ethernet.rs
index a196259a8..405cce6bc 100644
--- a/examples/stm32f4/src/bin/usb_ethernet.rs
+++ b/examples/stm32f4/src/bin/usb_ethernet.rs
@@ -7,8 +7,8 @@ use embassy_net::tcp::TcpSocket;
 use embassy_net::{Stack, StackResources};
 use embassy_stm32::rng::{self, Rng};
 use embassy_stm32::time::Hertz;
-use embassy_stm32::usb_otg::Driver;
-use embassy_stm32::{bind_interrupts, peripherals, usb_otg, Config};
+use embassy_stm32::usb::Driver;
+use embassy_stm32::{bind_interrupts, peripherals, usb, Config};
 use embassy_usb::class::cdc_ncm::embassy_net::{Device, Runner, State as NetState};
 use embassy_usb::class::cdc_ncm::{CdcNcmClass, State};
 use embassy_usb::{Builder, UsbDevice};
@@ -36,7 +36,7 @@ async fn net_task(stack: &'static Stack<Device<'static, MTU>>) -> ! {
 }
 
 bind_interrupts!(struct Irqs {
-    OTG_FS => usb_otg::InterruptHandler<peripherals::USB_OTG_FS>;
+    OTG_FS => usb::InterruptHandler<peripherals::USB_OTG_FS>;
     HASH_RNG => rng::InterruptHandler<peripherals::RNG>;
 });
 
@@ -63,13 +63,14 @@ async fn main(spawner: Spawner) {
         config.rcc.apb1_pre = APBPrescaler::DIV4;
         config.rcc.apb2_pre = APBPrescaler::DIV2;
         config.rcc.sys = Sysclk::PLL1_P;
+        config.rcc.mux.clk48sel = mux::Clk48sel::PLL1_Q;
     }
     let p = embassy_stm32::init(config);
 
     // Create the driver, from the HAL.
     static OUTPUT_BUFFER: StaticCell<[u8; 256]> = StaticCell::new();
     let ep_out_buffer = &mut OUTPUT_BUFFER.init([0; 256])[..];
-    let mut config = embassy_stm32::usb_otg::Config::default();
+    let mut config = embassy_stm32::usb::Config::default();
     config.vbus_detection = true;
     let driver = Driver::new_fs(p.USB_OTG_FS, Irqs, p.PA12, p.PA11, ep_out_buffer, config);
 
diff --git a/examples/stm32f4/src/bin/usb_hid_keyboard.rs b/examples/stm32f4/src/bin/usb_hid_keyboard.rs
index 19b5971fb..6c25a0a64 100644
--- a/examples/stm32f4/src/bin/usb_hid_keyboard.rs
+++ b/examples/stm32f4/src/bin/usb_hid_keyboard.rs
@@ -8,8 +8,8 @@ use embassy_executor::Spawner;
 use embassy_stm32::exti::ExtiInput;
 use embassy_stm32::gpio::Pull;
 use embassy_stm32::time::Hertz;
-use embassy_stm32::usb_otg::Driver;
-use embassy_stm32::{bind_interrupts, peripherals, usb_otg, Config};
+use embassy_stm32::usb::Driver;
+use embassy_stm32::{bind_interrupts, peripherals, usb, Config};
 use embassy_usb::class::hid::{HidReaderWriter, ReportId, RequestHandler, State};
 use embassy_usb::control::OutResponse;
 use embassy_usb::{Builder, Handler};
@@ -18,7 +18,7 @@ use usbd_hid::descriptor::{KeyboardReport, SerializedDescriptor};
 use {defmt_rtt as _, panic_probe as _};
 
 bind_interrupts!(struct Irqs {
-    OTG_FS => usb_otg::InterruptHandler<peripherals::USB_OTG_FS>;
+    OTG_FS => usb::InterruptHandler<peripherals::USB_OTG_FS>;
 });
 
 #[embassy_executor::main]
@@ -42,12 +42,13 @@ async fn main(_spawner: Spawner) {
         config.rcc.apb1_pre = APBPrescaler::DIV4;
         config.rcc.apb2_pre = APBPrescaler::DIV2;
         config.rcc.sys = Sysclk::PLL1_P;
+        config.rcc.mux.clk48sel = mux::Clk48sel::PLL1_Q;
     }
     let p = embassy_stm32::init(config);
 
     // Create the driver, from the HAL.
     let mut ep_out_buffer = [0u8; 256];
-    let mut config = embassy_stm32::usb_otg::Config::default();
+    let mut config = embassy_stm32::usb::Config::default();
     config.vbus_detection = true;
     let driver = Driver::new_fs(p.USB_OTG_FS, Irqs, p.PA12, p.PA11, &mut ep_out_buffer, config);
 
diff --git a/examples/stm32f4/src/bin/usb_hid_mouse.rs b/examples/stm32f4/src/bin/usb_hid_mouse.rs
index c98792880..d4725d597 100644
--- a/examples/stm32f4/src/bin/usb_hid_mouse.rs
+++ b/examples/stm32f4/src/bin/usb_hid_mouse.rs
@@ -4,8 +4,8 @@
 use defmt::*;
 use embassy_executor::Spawner;
 use embassy_stm32::time::Hertz;
-use embassy_stm32::usb_otg::Driver;
-use embassy_stm32::{bind_interrupts, peripherals, usb_otg, Config};
+use embassy_stm32::usb::Driver;
+use embassy_stm32::{bind_interrupts, peripherals, usb, Config};
 use embassy_time::Timer;
 use embassy_usb::class::hid::{HidWriter, ReportId, RequestHandler, State};
 use embassy_usb::control::OutResponse;
@@ -15,7 +15,7 @@ use usbd_hid::descriptor::{MouseReport, SerializedDescriptor};
 use {defmt_rtt as _, panic_probe as _};
 
 bind_interrupts!(struct Irqs {
-    OTG_FS => usb_otg::InterruptHandler<peripherals::USB_OTG_FS>;
+    OTG_FS => usb::InterruptHandler<peripherals::USB_OTG_FS>;
 });
 
 #[embassy_executor::main]
@@ -39,12 +39,13 @@ async fn main(_spawner: Spawner) {
         config.rcc.apb1_pre = APBPrescaler::DIV4;
         config.rcc.apb2_pre = APBPrescaler::DIV2;
         config.rcc.sys = Sysclk::PLL1_P;
+        config.rcc.mux.clk48sel = mux::Clk48sel::PLL1_Q;
     }
     let p = embassy_stm32::init(config);
 
     // Create the driver, from the HAL.
     let mut ep_out_buffer = [0u8; 256];
-    let mut config = embassy_stm32::usb_otg::Config::default();
+    let mut config = embassy_stm32::usb::Config::default();
     config.vbus_detection = true;
     let driver = Driver::new_fs(p.USB_OTG_FS, Irqs, p.PA12, p.PA11, &mut ep_out_buffer, config);
 
diff --git a/examples/stm32f4/src/bin/usb_raw.rs b/examples/stm32f4/src/bin/usb_raw.rs
index afff55187..15a98ff8b 100644
--- a/examples/stm32f4/src/bin/usb_raw.rs
+++ b/examples/stm32f4/src/bin/usb_raw.rs
@@ -52,8 +52,8 @@
 use defmt::*;
 use embassy_executor::Spawner;
 use embassy_stm32::time::Hertz;
-use embassy_stm32::usb_otg::Driver;
-use embassy_stm32::{bind_interrupts, peripherals, usb_otg, Config};
+use embassy_stm32::usb::Driver;
+use embassy_stm32::{bind_interrupts, peripherals, usb, Config};
 use embassy_usb::control::{InResponse, OutResponse, Recipient, Request, RequestType};
 use embassy_usb::msos::{self, windows_version};
 use embassy_usb::types::InterfaceNumber;
@@ -66,7 +66,7 @@ use {defmt_rtt as _, panic_probe as _};
 const DEVICE_INTERFACE_GUIDS: &[&str] = &["{DAC2087C-63FA-458D-A55D-827C0762DEC7}"];
 
 bind_interrupts!(struct Irqs {
-    OTG_FS => usb_otg::InterruptHandler<peripherals::USB_OTG_FS>;
+    OTG_FS => usb::InterruptHandler<peripherals::USB_OTG_FS>;
 });
 
 #[embassy_executor::main]
@@ -92,12 +92,13 @@ async fn main(_spawner: Spawner) {
         config.rcc.apb1_pre = APBPrescaler::DIV4;
         config.rcc.apb2_pre = APBPrescaler::DIV2;
         config.rcc.sys = Sysclk::PLL1_P;
+        config.rcc.mux.clk48sel = mux::Clk48sel::PLL1_Q;
     }
     let p = embassy_stm32::init(config);
 
     // Create the driver, from the HAL.
     let mut ep_out_buffer = [0u8; 256];
-    let mut config = embassy_stm32::usb_otg::Config::default();
+    let mut config = embassy_stm32::usb::Config::default();
     config.vbus_detection = true;
     let driver = Driver::new_fs(p.USB_OTG_FS, Irqs, p.PA12, p.PA11, &mut ep_out_buffer, config);
 
diff --git a/examples/stm32f4/src/bin/usb_serial.rs b/examples/stm32f4/src/bin/usb_serial.rs
index 58d994a61..6080b34a8 100644
--- a/examples/stm32f4/src/bin/usb_serial.rs
+++ b/examples/stm32f4/src/bin/usb_serial.rs
@@ -4,8 +4,8 @@
 use defmt::{panic, *};
 use embassy_executor::Spawner;
 use embassy_stm32::time::Hertz;
-use embassy_stm32::usb_otg::{Driver, Instance};
-use embassy_stm32::{bind_interrupts, peripherals, usb_otg, Config};
+use embassy_stm32::usb::{Driver, Instance};
+use embassy_stm32::{bind_interrupts, peripherals, usb, Config};
 use embassy_usb::class::cdc_acm::{CdcAcmClass, State};
 use embassy_usb::driver::EndpointError;
 use embassy_usb::Builder;
@@ -13,7 +13,7 @@ use futures::future::join;
 use {defmt_rtt as _, panic_probe as _};
 
 bind_interrupts!(struct Irqs {
-    OTG_FS => usb_otg::InterruptHandler<peripherals::USB_OTG_FS>;
+    OTG_FS => usb::InterruptHandler<peripherals::USB_OTG_FS>;
 });
 
 #[embassy_executor::main]
@@ -39,12 +39,13 @@ async fn main(_spawner: Spawner) {
         config.rcc.apb1_pre = APBPrescaler::DIV4;
         config.rcc.apb2_pre = APBPrescaler::DIV2;
         config.rcc.sys = Sysclk::PLL1_P;
+        config.rcc.mux.clk48sel = mux::Clk48sel::PLL1_Q;
     }
     let p = embassy_stm32::init(config);
 
     // Create the driver, from the HAL.
     let mut ep_out_buffer = [0u8; 256];
-    let mut config = embassy_stm32::usb_otg::Config::default();
+    let mut config = embassy_stm32::usb::Config::default();
     config.vbus_detection = true;
     let driver = Driver::new_fs(p.USB_OTG_FS, Irqs, p.PA12, p.PA11, &mut ep_out_buffer, config);
 
diff --git a/examples/stm32f7/src/bin/usb_serial.rs b/examples/stm32f7/src/bin/usb_serial.rs
index 97daf6bd1..26ecf3bc8 100644
--- a/examples/stm32f7/src/bin/usb_serial.rs
+++ b/examples/stm32f7/src/bin/usb_serial.rs
@@ -4,8 +4,8 @@
 use defmt::{panic, *};
 use embassy_executor::Spawner;
 use embassy_stm32::time::Hertz;
-use embassy_stm32::usb_otg::{Driver, Instance};
-use embassy_stm32::{bind_interrupts, peripherals, usb_otg, Config};
+use embassy_stm32::usb::{Driver, Instance};
+use embassy_stm32::{bind_interrupts, peripherals, usb, Config};
 use embassy_usb::class::cdc_acm::{CdcAcmClass, State};
 use embassy_usb::driver::EndpointError;
 use embassy_usb::Builder;
@@ -13,7 +13,7 @@ use futures::future::join;
 use {defmt_rtt as _, panic_probe as _};
 
 bind_interrupts!(struct Irqs {
-    OTG_FS => usb_otg::InterruptHandler<peripherals::USB_OTG_FS>;
+    OTG_FS => usb::InterruptHandler<peripherals::USB_OTG_FS>;
 });
 
 #[embassy_executor::main]
@@ -39,12 +39,13 @@ async fn main(_spawner: Spawner) {
         config.rcc.apb1_pre = APBPrescaler::DIV4;
         config.rcc.apb2_pre = APBPrescaler::DIV2;
         config.rcc.sys = Sysclk::PLL1_P;
+        config.rcc.mux.clk48sel = mux::Clk48sel::PLL1_Q;
     }
     let p = embassy_stm32::init(config);
 
     // Create the driver, from the HAL.
     let mut ep_out_buffer = [0u8; 256];
-    let mut config = embassy_stm32::usb_otg::Config::default();
+    let mut config = embassy_stm32::usb::Config::default();
     config.vbus_detection = true;
     let driver = Driver::new_fs(p.USB_OTG_FS, Irqs, p.PA12, p.PA11, &mut ep_out_buffer, config);
 
diff --git a/examples/stm32h7/src/bin/usb_serial.rs b/examples/stm32h7/src/bin/usb_serial.rs
index d81efb541..c3ddda72a 100644
--- a/examples/stm32h7/src/bin/usb_serial.rs
+++ b/examples/stm32h7/src/bin/usb_serial.rs
@@ -3,8 +3,8 @@
 
 use defmt::{panic, *};
 use embassy_executor::Spawner;
-use embassy_stm32::usb_otg::{Driver, Instance};
-use embassy_stm32::{bind_interrupts, peripherals, usb_otg, Config};
+use embassy_stm32::usb::{Driver, Instance};
+use embassy_stm32::{bind_interrupts, peripherals, usb, Config};
 use embassy_usb::class::cdc_acm::{CdcAcmClass, State};
 use embassy_usb::driver::EndpointError;
 use embassy_usb::Builder;
@@ -12,7 +12,7 @@ use futures::future::join;
 use {defmt_rtt as _, panic_probe as _};
 
 bind_interrupts!(struct Irqs {
-    OTG_FS => usb_otg::InterruptHandler<peripherals::USB_OTG_FS>;
+    OTG_FS => usb::InterruptHandler<peripherals::USB_OTG_FS>;
 });
 
 #[embassy_executor::main]
@@ -40,12 +40,13 @@ async fn main(_spawner: Spawner) {
         config.rcc.apb3_pre = APBPrescaler::DIV2; // 100 Mhz
         config.rcc.apb4_pre = APBPrescaler::DIV2; // 100 Mhz
         config.rcc.voltage_scale = VoltageScale::Scale1;
+        config.rcc.mux.usbsel = mux::Usbsel::HSI48;
     }
     let p = embassy_stm32::init(config);
 
     // Create the driver, from the HAL.
     let mut ep_out_buffer = [0u8; 256];
-    let mut config = embassy_stm32::usb_otg::Config::default();
+    let mut config = embassy_stm32::usb::Config::default();
     config.vbus_detection = true;
     let driver = Driver::new_fs(p.USB_OTG_FS, Irqs, p.PA12, p.PA11, &mut ep_out_buffer, config);
 
diff --git a/examples/stm32l4/src/bin/usb_serial.rs b/examples/stm32l4/src/bin/usb_serial.rs
index 9247e56a1..047234d60 100644
--- a/examples/stm32l4/src/bin/usb_serial.rs
+++ b/examples/stm32l4/src/bin/usb_serial.rs
@@ -4,9 +4,8 @@
 use defmt::{panic, *};
 use defmt_rtt as _; // global logger
 use embassy_executor::Spawner;
-use embassy_stm32::rcc::*;
-use embassy_stm32::usb_otg::{Driver, Instance};
-use embassy_stm32::{bind_interrupts, peripherals, usb_otg, Config};
+use embassy_stm32::usb::{Driver, Instance};
+use embassy_stm32::{bind_interrupts, peripherals, usb, Config};
 use embassy_usb::class::cdc_acm::{CdcAcmClass, State};
 use embassy_usb::driver::EndpointError;
 use embassy_usb::Builder;
@@ -14,7 +13,7 @@ use futures::future::join;
 use panic_probe as _;
 
 bind_interrupts!(struct Irqs {
-    OTG_FS => usb_otg::InterruptHandler<peripherals::USB_OTG_FS>;
+    OTG_FS => usb::InterruptHandler<peripherals::USB_OTG_FS>;
 });
 
 #[embassy_executor::main]
@@ -22,23 +21,26 @@ async fn main(_spawner: Spawner) {
     info!("Hello World!");
 
     let mut config = Config::default();
-    config.rcc.hsi48 = Some(Hsi48Config { sync_from_usb: true }); // needed for USB
-    config.rcc.sys = Sysclk::PLL1_R;
-    config.rcc.hsi = true;
-    config.rcc.pll = Some(Pll {
-        source: PllSource::HSI,
-        prediv: PllPreDiv::DIV1,
-        mul: PllMul::MUL10,
-        divp: None,
-        divq: None,
-        divr: Some(PllRDiv::DIV2), // sysclk 80Mhz (16 / 1 * 10 / 2)
-    });
-
+    {
+        use embassy_stm32::rcc::*;
+        config.rcc.hsi48 = Some(Hsi48Config { sync_from_usb: true }); // needed for USB
+        config.rcc.sys = Sysclk::PLL1_R;
+        config.rcc.hsi = true;
+        config.rcc.pll = Some(Pll {
+            source: PllSource::HSI,
+            prediv: PllPreDiv::DIV1,
+            mul: PllMul::MUL10,
+            divp: None,
+            divq: None,
+            divr: Some(PllRDiv::DIV2), // sysclk 80Mhz (16 / 1 * 10 / 2)
+        });
+        config.rcc.mux.clk48sel = mux::Clk48sel::HSI48;
+    }
     let p = embassy_stm32::init(config);
 
     // Create the driver, from the HAL.
     let mut ep_out_buffer = [0u8; 256];
-    let mut config = embassy_stm32::usb_otg::Config::default();
+    let mut config = embassy_stm32::usb::Config::default();
     config.vbus_detection = true;
     let driver = Driver::new_fs(p.USB_OTG_FS, Irqs, p.PA12, p.PA11, &mut ep_out_buffer, config);
 
diff --git a/examples/stm32l5/src/bin/usb_ethernet.rs b/examples/stm32l5/src/bin/usb_ethernet.rs
index f6d8b16d0..dc1e7022d 100644
--- a/examples/stm32l5/src/bin/usb_ethernet.rs
+++ b/examples/stm32l5/src/bin/usb_ethernet.rs
@@ -5,7 +5,6 @@ use defmt::*;
 use embassy_executor::Spawner;
 use embassy_net::tcp::TcpSocket;
 use embassy_net::{Stack, StackResources};
-use embassy_stm32::rcc::*;
 use embassy_stm32::rng::Rng;
 use embassy_stm32::usb::Driver;
 use embassy_stm32::{bind_interrupts, peripherals, rng, usb, Config};
@@ -44,17 +43,22 @@ async fn net_task(stack: &'static Stack<Device<'static, MTU>>) -> ! {
 #[embassy_executor::main]
 async fn main(spawner: Spawner) {
     let mut config = Config::default();
-    config.rcc.hsi = true;
-    config.rcc.sys = Sysclk::PLL1_R;
-    config.rcc.pll = Some(Pll {
-        // 80Mhz clock (16 / 1 * 10 / 2)
-        source: PllSource::HSI,
-        prediv: PllPreDiv::DIV1,
-        mul: PllMul::MUL10,
-        divp: None,
-        divq: None,
-        divr: Some(PllRDiv::DIV2),
-    });
+    {
+        use embassy_stm32::rcc::*;
+        config.rcc.hsi = true;
+        config.rcc.sys = Sysclk::PLL1_R;
+        config.rcc.pll = Some(Pll {
+            // 80Mhz clock (16 / 1 * 10 / 2)
+            source: PllSource::HSI,
+            prediv: PllPreDiv::DIV1,
+            mul: PllMul::MUL10,
+            divp: None,
+            divq: None,
+            divr: Some(PllRDiv::DIV2),
+        });
+        config.rcc.hsi48 = Some(Hsi48Config { sync_from_usb: true }); // needed for USB
+        config.rcc.mux.clk48sel = mux::Clk48sel::HSI48;
+    }
     let p = embassy_stm32::init(config);
 
     // Create the driver, from the HAL.
diff --git a/examples/stm32l5/src/bin/usb_hid_mouse.rs b/examples/stm32l5/src/bin/usb_hid_mouse.rs
index c51ed96e0..b86fba455 100644
--- a/examples/stm32l5/src/bin/usb_hid_mouse.rs
+++ b/examples/stm32l5/src/bin/usb_hid_mouse.rs
@@ -4,7 +4,6 @@
 use defmt::*;
 use embassy_executor::Spawner;
 use embassy_futures::join::join;
-use embassy_stm32::rcc::*;
 use embassy_stm32::usb::Driver;
 use embassy_stm32::{bind_interrupts, peripherals, usb, Config};
 use embassy_time::Timer;
@@ -21,17 +20,22 @@ bind_interrupts!(struct Irqs {
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {
     let mut config = Config::default();
-    config.rcc.hsi = true;
-    config.rcc.sys = Sysclk::PLL1_R;
-    config.rcc.pll = Some(Pll {
-        // 80Mhz clock (16 / 1 * 10 / 2)
-        source: PllSource::HSI,
-        prediv: PllPreDiv::DIV1,
-        mul: PllMul::MUL10,
-        divp: None,
-        divq: None,
-        divr: Some(PllRDiv::DIV2),
-    });
+    {
+        use embassy_stm32::rcc::*;
+        config.rcc.hsi = true;
+        config.rcc.sys = Sysclk::PLL1_R;
+        config.rcc.pll = Some(Pll {
+            // 80Mhz clock (16 / 1 * 10 / 2)
+            source: PllSource::HSI,
+            prediv: PllPreDiv::DIV1,
+            mul: PllMul::MUL10,
+            divp: None,
+            divq: None,
+            divr: Some(PllRDiv::DIV2),
+        });
+        config.rcc.hsi48 = Some(Hsi48Config { sync_from_usb: true }); // needed for USB
+        config.rcc.mux.clk48sel = mux::Clk48sel::HSI48;
+    }
     let p = embassy_stm32::init(config);
 
     // Create the driver, from the HAL.
diff --git a/examples/stm32l5/src/bin/usb_serial.rs b/examples/stm32l5/src/bin/usb_serial.rs
index 87987f2ce..5e2378b58 100644
--- a/examples/stm32l5/src/bin/usb_serial.rs
+++ b/examples/stm32l5/src/bin/usb_serial.rs
@@ -4,7 +4,6 @@
 use defmt::{panic, *};
 use embassy_executor::Spawner;
 use embassy_futures::join::join;
-use embassy_stm32::rcc::*;
 use embassy_stm32::usb::{Driver, Instance};
 use embassy_stm32::{bind_interrupts, peripherals, usb, Config};
 use embassy_usb::class::cdc_acm::{CdcAcmClass, State};
@@ -19,17 +18,22 @@ bind_interrupts!(struct Irqs {
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {
     let mut config = Config::default();
-    config.rcc.hsi = true;
-    config.rcc.sys = Sysclk::PLL1_R;
-    config.rcc.pll = Some(Pll {
-        // 80Mhz clock (16 / 1 * 10 / 2)
-        source: PllSource::HSI,
-        prediv: PllPreDiv::DIV1,
-        mul: PllMul::MUL10,
-        divp: None,
-        divq: None,
-        divr: Some(PllRDiv::DIV2),
-    });
+    {
+        use embassy_stm32::rcc::*;
+        config.rcc.hsi = true;
+        config.rcc.sys = Sysclk::PLL1_R;
+        config.rcc.pll = Some(Pll {
+            // 80Mhz clock (16 / 1 * 10 / 2)
+            source: PllSource::HSI,
+            prediv: PllPreDiv::DIV1,
+            mul: PllMul::MUL10,
+            divp: None,
+            divq: None,
+            divr: Some(PllRDiv::DIV2),
+        });
+        config.rcc.hsi48 = Some(Hsi48Config { sync_from_usb: true }); // needed for USB
+        config.rcc.mux.clk48sel = mux::Clk48sel::HSI48;
+    }
     let p = embassy_stm32::init(config);
 
     info!("Hello World!");
diff --git a/examples/stm32u5/src/bin/usb_serial.rs b/examples/stm32u5/src/bin/usb_serial.rs
index 61851e5a2..33e02ce3b 100644
--- a/examples/stm32u5/src/bin/usb_serial.rs
+++ b/examples/stm32u5/src/bin/usb_serial.rs
@@ -4,8 +4,8 @@
 use defmt::{panic, *};
 use defmt_rtt as _; // global logger
 use embassy_executor::Spawner;
-use embassy_stm32::usb_otg::{Driver, Instance};
-use embassy_stm32::{bind_interrupts, peripherals, usb_otg, Config};
+use embassy_stm32::usb::{Driver, Instance};
+use embassy_stm32::{bind_interrupts, peripherals, usb, Config};
 use embassy_usb::class::cdc_acm::{CdcAcmClass, State};
 use embassy_usb::driver::EndpointError;
 use embassy_usb::Builder;
@@ -13,7 +13,7 @@ use futures::future::join;
 use panic_probe as _;
 
 bind_interrupts!(struct Irqs {
-    OTG_FS => usb_otg::InterruptHandler<peripherals::USB_OTG_FS>;
+    OTG_FS => usb::InterruptHandler<peripherals::USB_OTG_FS>;
 });
 
 #[embassy_executor::main]
@@ -35,13 +35,14 @@ async fn main(_spawner: Spawner) {
         config.rcc.sys = Sysclk::PLL1_R;
         config.rcc.voltage_range = VoltageScale::RANGE1;
         config.rcc.hsi48 = Some(Hsi48Config { sync_from_usb: true }); // needed for USB
+        config.rcc.mux.iclksel = mux::Iclksel::HSI48; // USB uses ICLK
     }
 
     let p = embassy_stm32::init(config);
 
     // Create the driver, from the HAL.
     let mut ep_out_buffer = [0u8; 256];
-    let mut config = embassy_stm32::usb_otg::Config::default();
+    let mut config = embassy_stm32::usb::Config::default();
     config.vbus_detection = false;
     let driver = Driver::new_fs(p.USB_OTG_FS, Irqs, p.PA12, p.PA11, &mut ep_out_buffer, config);