3 files changed, 78 insertions, 0 deletions

diff --git a/examples/stm32wb/Cargo.toml b/examples/stm32wb/Cargo.toml
index 83a443754..e41424aad 100644
--- a/examples/stm32wb/Cargo.toml
+++ b/examples/stm32wb/Cargo.toml
@@ -20,3 +20,17 @@ embedded-hal = "0.2.6"
 panic-probe = { version = "0.3", features = ["print-defmt"] }
 futures = { version = "0.3.17", default-features = false, features = ["async-await"] }
 heapless = { version = "0.7.5", default-features = false }
+
+
+[features]
+default = ["ble"]
+mac = ["embassy-stm32-wpan/mac"]
+ble = ["embassy-stm32-wpan/ble"]
+
+[[bin]] 
+name = "tl_mbox_ble"
+required-features = ["ble"]
+
+[[bin]] 
+name = "tl_mbox_mac"
+required-features = ["mac"]
\ No newline at end of file
diff --git a/examples/stm32wb/src/bin/tl_mbox_tx_rx.rs b/examples/stm32wb/src/bin/tl_mbox_ble.rs
index 439bd01ac..439bd01ac 100644
--- a/examples/stm32wb/src/bin/tl_mbox_tx_rx.rs
+++ b/examples/stm32wb/src/bin/tl_mbox_ble.rs
diff --git a/examples/stm32wb/src/bin/tl_mbox_mac.rs b/examples/stm32wb/src/bin/tl_mbox_mac.rs
new file mode 100644
index 000000000..f13f260b5
--- /dev/null
+++ b/examples/stm32wb/src/bin/tl_mbox_mac.rs
@@ -0,0 +1,64 @@
+#![no_std]
+#![no_main]
+#![feature(type_alias_impl_trait)]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_stm32::bind_interrupts;
+use embassy_stm32::ipcc::{Config, ReceiveInterruptHandler, TransmitInterruptHandler};
+use embassy_stm32_wpan::TlMbox;
+use {defmt_rtt as _, panic_probe as _};
+
+bind_interrupts!(struct Irqs{
+    IPCC_C1_RX => ReceiveInterruptHandler;
+    IPCC_C1_TX => TransmitInterruptHandler;
+});
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    /*
+        How to make this work:
+
+        - Obtain a NUCLEO-STM32WB55 from your preferred supplier.
+        - Download and Install STM32CubeProgrammer.
+        - Download stm32wb5x_FUS_fw.bin, stm32wb5x_BLE_Stack_full_fw.bin, and Release_Notes.html from
+          gh:STMicroelectronics/STM32CubeWB@2234d97/Projects/STM32WB_Copro_Wireless_Binaries/STM32WB5x
+        - Open STM32CubeProgrammer
+        - On the right-hand pane, click "firmware upgrade" to upgrade the st-link firmware.
+        - Once complete, click connect to connect to the device.
+        - On the left hand pane, click the RSS signal icon to open "Firmware Upgrade Services".
+        - In the Release_Notes.html, find the memory address that corresponds to your device for the stm32wb5x_FUS_fw.bin file
+        - Select that file, the memory address, "verify download", and then "Firmware Upgrade".
+        - Once complete, in the Release_Notes.html, find the memory address that corresponds to your device for the
+          stm32wb5x_BLE_Stack_full_fw.bin file. It should not be the same memory address.
+        - Select that file, the memory address, "verify download", and then "Firmware Upgrade".
+        - Select "Start Wireless Stack".
+        - Disconnect from the device.
+        - In the examples folder for stm32wb, modify the memory.x file to match your target device.
+        - Run this example.
+
+        Note: extended stack versions are not supported at this time. Do not attempt to install a stack with "extended" in the name.
+    */
+
+    let p = embassy_stm32::init(Default::default());
+    info!("Hello World!");
+
+    let config = Config::default();
+    let mbox = TlMbox::init(p.IPCC, Irqs, config);
+
+    let sys_event = mbox.sys_subsystem.read().await;
+    info!("sys event: {}", sys_event.payload());
+
+//    mbox.sys_subsystem.shci_c2_ble_init(Default::default()).await; 
+//
+//    info!("starting ble...");
+//    mbox.ble_subsystem.write(0x0c, &[]).await;
+//
+//    info!("waiting for ble...");
+//    let ble_event = mbox.ble_subsystem.read().await;
+//
+//    info!("ble event: {}", ble_event.payload());
+
+    info!("Test OK");
+    cortex_m::asm::bkpt();
+}