13 files changed, 66 insertions, 53 deletions

diff --git a/examples/mcxa/src/bin/clkout.rs b/examples/mcxa/src/bin/clkout.rs
index 1e52912d3..e6e6a2d3d 100644
--- a/examples/mcxa/src/bin/clkout.rs
+++ b/examples/mcxa/src/bin/clkout.rs
@@ -4,6 +4,7 @@
 use embassy_executor::Spawner;
 use embassy_mcxa::clkout::{ClockOut, ClockOutSel, Config, Div4};
 use embassy_mcxa::clocks::PoweredClock;
+use embassy_mcxa::clocks::config::{SoscConfig, SoscMode};
 use embassy_mcxa::gpio::{DriveStrength, Level, Output, SlewRate};
 use embassy_time::Timer;
 use {defmt_rtt as _, embassy_mcxa as hal, panic_probe as _};
@@ -11,58 +12,61 @@ use {defmt_rtt as _, embassy_mcxa as hal, panic_probe as _};
 /// Demonstrate CLKOUT, using Pin P4.2
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {
-    let p = hal::init(hal::config::Config::default());
+    let mut cfg = hal::config::Config::default();
+    cfg.clock_cfg.sosc = Some(SoscConfig {
+        mode: SoscMode::CrystalOscillator,
+        frequency: 8_000_000,
+        power: PoweredClock::NormalEnabledDeepSleepDisabled,
+    });
+
+    let p = hal::init(cfg);
+
     let mut pin = p.P4_2;
     let mut clkout = p.CLKOUT;
 
-    loop {
-        defmt::info!("Set Low...");
-        let mut output = Output::new(pin.reborrow(), Level::Low, DriveStrength::Normal, SlewRate::Slow);
-        Timer::after_millis(500).await;
+    const K16_CONFIG: Config = Config {
+        sel: ClockOutSel::Clk16K,
+        div: Div4::no_div(),
+        level: PoweredClock::NormalEnabledDeepSleepDisabled,
+    };
+    const M4_CONFIG: Config = Config {
+        sel: ClockOutSel::Fro12M,
+        div: const { Div4::from_divisor(3).unwrap() },
+        level: PoweredClock::NormalEnabledDeepSleepDisabled,
+    };
+    const K512_CONFIG: Config = Config {
+        sel: ClockOutSel::ClkIn,
+        div: const { Div4::from_divisor(16).unwrap() },
+        level: PoweredClock::NormalEnabledDeepSleepDisabled,
+    };
 
+    let configs = [
+        ("16K -> /1 = 16K", K16_CONFIG),
+        ("12M -> /3 = 4M", M4_CONFIG),
+        ("8M -> /16 = 512K", K512_CONFIG),
+    ];
+
+    loop {
         defmt::info!("Set High...");
-        output.set_high();
-        Timer::after_millis(400).await;
+        let mut output = Output::new(pin.reborrow(), Level::High, DriveStrength::Normal, SlewRate::Slow);
+        Timer::after_millis(250).await;
 
         defmt::info!("Set Low...");
         output.set_low();
-        Timer::after_millis(500).await;
+        Timer::after_millis(750).await;
 
-        defmt::info!("16k...");
-        // Run Clock Out with the 16K clock
-        let _clock_out = ClockOut::new(
-            clkout.reborrow(),
-            pin.reborrow(),
-            Config {
-                sel: ClockOutSel::Clk16K,
-                div: Div4::no_div(),
-                level: PoweredClock::NormalEnabledDeepSleepDisabled,
-            },
-        )
-        .unwrap();
+        for (name, conf) in configs.iter() {
+            defmt::info!("Running {=str}", name);
 
-        Timer::after_millis(3000).await;
-
-        defmt::info!("Set Low...");
-        drop(_clock_out);
+            let _clock_out = ClockOut::new(clkout.reborrow(), pin.reborrow(), *conf).unwrap();
 
-        let _output = Output::new(pin.reborrow(), Level::Low, DriveStrength::Normal, SlewRate::Slow);
-        Timer::after_millis(500).await;
+            Timer::after_millis(3000).await;
 
-        // Run Clock Out with the 12M clock, divided by 3
-        defmt::info!("4M...");
-        let _clock_out = ClockOut::new(
-            clkout.reborrow(),
-            pin.reborrow(),
-            Config {
-                sel: ClockOutSel::Fro12M,
-                div: const { Div4::from_divisor(3).unwrap() },
-                level: PoweredClock::NormalEnabledDeepSleepDisabled,
-            },
-        )
-        .unwrap();
+            defmt::info!("Set Low...");
+            drop(_clock_out);
 
-        // Let it run for 3 seconds...
-        Timer::after_millis(3000).await;
+            let _output = Output::new(pin.reborrow(), Level::Low, DriveStrength::Normal, SlewRate::Slow);
+            Timer::after_millis(500).await;
+        }
     }
 }
diff --git a/examples/rp/src/bin/usb_webusb.rs b/examples/rp/src/bin/usb_webusb.rs
index 5cecb92f0..edc9a0c52 100644
--- a/examples/rp/src/bin/usb_webusb.rs
+++ b/examples/rp/src/bin/usb_webusb.rs
@@ -26,6 +26,7 @@ use embassy_rp::usb::{Driver as UsbDriver, InterruptHandler};
 use embassy_usb::class::web_usb::{Config as WebUsbConfig, State, Url, WebUsb};
 use embassy_usb::driver::{Driver, Endpoint, EndpointIn, EndpointOut};
 use embassy_usb::msos::{self, windows_version};
+use embassy_usb::types::InterfaceNumber;
 use embassy_usb::{Builder, Config};
 use {defmt_rtt as _, panic_probe as _};
 
@@ -56,7 +57,7 @@ async fn main(_spawner: Spawner) {
     let mut config_descriptor = [0; 256];
     let mut bos_descriptor = [0; 256];
     let mut control_buf = [0; 64];
-    let mut msos_descriptor = [0; 256];
+    let mut msos_descriptor = [0; 512];
 
     let webusb_config = WebUsbConfig {
         max_packet_size: 64,
@@ -83,6 +84,14 @@ async fn main(_spawner: Spawner) {
     // In principle you might want to call msos_feature() just on a specific function,
     // if your device also has other functions that still use standard class drivers.
     builder.msos_descriptor(windows_version::WIN8_1, 0);
+    builder.msos_writer().configuration(0);
+    builder.msos_writer().function(InterfaceNumber(0));
+    builder.msos_feature(msos::CompatibleIdFeatureDescriptor::new("WINUSB", ""));
+    builder.msos_feature(msos::RegistryPropertyFeatureDescriptor::new(
+        "DeviceInterfaceGUIDs",
+        msos::PropertyData::RegMultiSz(DEVICE_INTERFACE_GUIDS),
+    ));
+    builder.msos_writer().function(InterfaceNumber(1));
     builder.msos_feature(msos::CompatibleIdFeatureDescriptor::new("WINUSB", ""));
     builder.msos_feature(msos::RegistryPropertyFeatureDescriptor::new(
         "DeviceInterfaceGUIDs",
diff --git a/examples/stm32wb/Cargo.toml b/examples/stm32wb/Cargo.toml
index 83f7cb56b..496500f75 100644
--- a/examples/stm32wb/Cargo.toml
+++ b/examples/stm32wb/Cargo.toml
@@ -7,10 +7,10 @@ publish = false
 
 [dependencies]
 # Change stm32wb55rg to your chip name in both dependencies, if necessary.
-embassy-stm32 = { version = "0.4.0", path = "../../embassy-stm32", features = [ "defmt", "stm32wb55rg", "time-driver-any", "memory-x", "exti", "low-power"]  }
+embassy-stm32 = { version = "0.4.0", path = "../../embassy-stm32", features = [ "defmt", "stm32wb55rg", "time-driver-any", "memory-x", "exti", "low-power-pender"]  }
 embassy-stm32-wpan = { version = "0.1.0", path = "../../embassy-stm32-wpan", features = ["defmt", "stm32wb55rg"] }
 embassy-sync = { version = "0.7.2", path = "../../embassy-sync", features = ["defmt"] }
-embassy-executor = { version = "0.9.0", path = "../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "defmt"] }
+embassy-executor = { version = "0.9.0", path = "../../embassy-executor", features = ["defmt"] }
 embassy-time = { version = "0.5.0", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime", "tick-hz-32_768"] }
 embassy-net = { version = "0.7.1", path = "../../embassy-net", features = ["defmt", "udp", "proto-ipv6", "medium-ieee802154", ], optional = true }
 
diff --git a/examples/stm32wb/src/bin/blinky.rs b/examples/stm32wb/src/bin/blinky.rs
index f37e8b1d8..e2737fcd5 100644
--- a/examples/stm32wb/src/bin/blinky.rs
+++ b/examples/stm32wb/src/bin/blinky.rs
@@ -7,7 +7,7 @@ use embassy_stm32::gpio::{Level, Output, Speed};
 use embassy_time::Timer;
 use {defmt_rtt as _, panic_probe as _};
 
-#[embassy_executor::main]
+#[embassy_executor::main(executor = "embassy_stm32::Executor", entry = "cortex_m_rt::entry")]
 async fn main(_spawner: Spawner) {
     let p = embassy_stm32::init(Default::default());
     info!("Hello World!");
diff --git a/examples/stm32wb/src/bin/button_exti.rs b/examples/stm32wb/src/bin/button_exti.rs
index 3c58eb556..37a207519 100644
--- a/examples/stm32wb/src/bin/button_exti.rs
+++ b/examples/stm32wb/src/bin/button_exti.rs
@@ -13,7 +13,7 @@ bind_interrupts!(
         EXTI4 => exti::InterruptHandler<interrupt::typelevel::EXTI4>;
 });
 
-#[embassy_executor::main]
+#[embassy_executor::main(executor = "embassy_stm32::Executor", entry = "cortex_m_rt::entry")]
 async fn main(_spawner: Spawner) {
     let p = embassy_stm32::init(Default::default());
     info!("Hello World!");
diff --git a/examples/stm32wb/src/bin/eddystone_beacon.rs b/examples/stm32wb/src/bin/eddystone_beacon.rs
index 413b1ac8f..a679e6fb1 100644
--- a/examples/stm32wb/src/bin/eddystone_beacon.rs
+++ b/examples/stm32wb/src/bin/eddystone_beacon.rs
@@ -26,7 +26,7 @@ bind_interrupts!(struct Irqs{
 
 const BLE_GAP_DEVICE_NAME_LENGTH: u8 = 7;
 
-#[embassy_executor::main]
+#[embassy_executor::main(executor = "embassy_stm32::Executor", entry = "cortex_m_rt::entry")]
 async fn main(_spawner: Spawner) {
     /*
         How to make this work:
diff --git a/examples/stm32wb/src/bin/gatt_server.rs b/examples/stm32wb/src/bin/gatt_server.rs
index 3484f1844..10c7fd0ba 100644
--- a/examples/stm32wb/src/bin/gatt_server.rs
+++ b/examples/stm32wb/src/bin/gatt_server.rs
@@ -38,7 +38,7 @@ bind_interrupts!(struct Irqs{
 
 const BLE_GAP_DEVICE_NAME_LENGTH: u8 = 7;
 
-#[embassy_executor::main]
+#[embassy_executor::main(executor = "embassy_stm32::Executor", entry = "cortex_m_rt::entry")]
 async fn main(spawner: Spawner) {
     /*
         How to make this work:
diff --git a/examples/stm32wb/src/bin/mac_ffd.rs b/examples/stm32wb/src/bin/mac_ffd.rs
index 4bab6ea9f..cd15968d2 100644
--- a/examples/stm32wb/src/bin/mac_ffd.rs
+++ b/examples/stm32wb/src/bin/mac_ffd.rs
@@ -23,7 +23,7 @@ async fn run_mm_queue(mut memory_manager: mm::MemoryManager<'static>) {
     memory_manager.run_queue().await;
 }
 
-#[embassy_executor::main]
+#[embassy_executor::main(executor = "embassy_stm32::Executor", entry = "cortex_m_rt::entry")]
 async fn main(spawner: Spawner) {
     /*
         How to make this work:
diff --git a/examples/stm32wb/src/bin/mac_ffd_net.rs b/examples/stm32wb/src/bin/mac_ffd_net.rs
index b4789e3ee..244b35243 100644
--- a/examples/stm32wb/src/bin/mac_ffd_net.rs
+++ b/examples/stm32wb/src/bin/mac_ffd_net.rs
@@ -41,7 +41,7 @@ async fn run_net(mut runner: embassy_net::Runner<'static, Driver<'static>>) -> !
     runner.run().await
 }
 
-#[embassy_executor::main]
+#[embassy_executor::main(executor = "embassy_stm32::Executor", entry = "cortex_m_rt::entry")]
 async fn main(spawner: Spawner) {
     /*
         How to make this work:
diff --git a/examples/stm32wb/src/bin/mac_rfd.rs b/examples/stm32wb/src/bin/mac_rfd.rs
index dae3c5200..f3e65c66b 100644
--- a/examples/stm32wb/src/bin/mac_rfd.rs
+++ b/examples/stm32wb/src/bin/mac_rfd.rs
@@ -25,7 +25,7 @@ async fn run_mm_queue(mut memory_manager: mm::MemoryManager<'static>) {
     memory_manager.run_queue().await;
 }
 
-#[embassy_executor::main]
+#[embassy_executor::main(executor = "embassy_stm32::Executor", entry = "cortex_m_rt::entry")]
 async fn main(spawner: Spawner) {
     /*
         How to make this work:
diff --git a/examples/stm32wb/src/bin/tl_mbox.rs b/examples/stm32wb/src/bin/tl_mbox.rs
index 0902e28e8..adb6eff7b 100644
--- a/examples/stm32wb/src/bin/tl_mbox.rs
+++ b/examples/stm32wb/src/bin/tl_mbox.rs
@@ -15,7 +15,7 @@ bind_interrupts!(struct Irqs{
     IPCC_C1_TX => TransmitInterruptHandler;
 });
 
-#[embassy_executor::main]
+#[embassy_executor::main(executor = "embassy_stm32::Executor", entry = "cortex_m_rt::entry")]
 async fn main(_spawner: Spawner) {
     /*
         How to make this work:
diff --git a/examples/stm32wb/src/bin/tl_mbox_ble.rs b/examples/stm32wb/src/bin/tl_mbox_ble.rs
index 763dc32cd..376b808de 100644
--- a/examples/stm32wb/src/bin/tl_mbox_ble.rs
+++ b/examples/stm32wb/src/bin/tl_mbox_ble.rs
@@ -20,7 +20,7 @@ async fn run_mm_queue(mut memory_manager: mm::MemoryManager<'static>) {
     memory_manager.run_queue().await;
 }
 
-#[embassy_executor::main]
+#[embassy_executor::main(executor = "embassy_stm32::Executor", entry = "cortex_m_rt::entry")]
 async fn main(spawner: Spawner) {
     /*
         How to make this work:
diff --git a/examples/stm32wb/src/bin/tl_mbox_mac.rs b/examples/stm32wb/src/bin/tl_mbox_mac.rs
index 235a48241..697e061c1 100644
--- a/examples/stm32wb/src/bin/tl_mbox_mac.rs
+++ b/examples/stm32wb/src/bin/tl_mbox_mac.rs
@@ -20,7 +20,7 @@ async fn run_mm_queue(mut memory_manager: mm::MemoryManager<'static>) {
     memory_manager.run_queue().await;
 }
 
-#[embassy_executor::main]
+#[embassy_executor::main(executor = "embassy_stm32::Executor", entry = "cortex_m_rt::entry")]
 async fn main(spawner: Spawner) {
     /*
         How to make this work: