path: root/embassy-rp/src/uart/buffered.rs

use core::future::{poll_fn, Future};
use core::slice;
use core::task::Poll;

use atomic_polyfill::{AtomicU8, Ordering};
use embassy_hal_internal::atomic_ring_buffer::RingBuffer;
use embassy_sync::waitqueue::AtomicWaker;
use embassy_time::Timer;

use super::*;
use crate::clocks::clk_peri_freq;
use crate::interrupt::typelevel::{Binding, Interrupt};
use crate::{interrupt, RegExt};

pub struct State {
    tx_waker: AtomicWaker,
    tx_buf: RingBuffer,
    rx_waker: AtomicWaker,
    rx_buf: RingBuffer,
    rx_error: AtomicU8,
}

// these must match bits 8..11 in UARTDR
const RXE_OVERRUN: u8 = 8;
const RXE_BREAK: u8 = 4;
const RXE_PARITY: u8 = 2;
const RXE_FRAMING: u8 = 1;

impl State {
    pub const fn new() -> Self {
        Self {
            rx_buf: RingBuffer::new(),
            tx_buf: RingBuffer::new(),
            rx_waker: AtomicWaker::new(),
            tx_waker: AtomicWaker::new(),
            rx_error: AtomicU8::new(0),
        }
    }
}

pub struct BufferedUart<'d, T: Instance> {
    pub(crate) rx: BufferedUartRx<'d, T>,
    pub(crate) tx: BufferedUartTx<'d, T>,
}

pub struct BufferedUartRx<'d, T: Instance> {
    pub(crate) phantom: PhantomData<&'d mut T>,
}

pub struct BufferedUartTx<'d, T: Instance> {
    pub(crate) phantom: PhantomData<&'d mut T>,
}

pub(crate) fn init_buffers<'d, T: Instance + 'd>(
    _irq: impl Binding<T::Interrupt, BufferedInterruptHandler<T>>,
    tx_buffer: &'d mut [u8],
    rx_buffer: &'d mut [u8],
) {
    let state = T::buffered_state();
    let len = tx_buffer.len();
    unsafe { state.tx_buf.init(tx_buffer.as_mut_ptr(), len) };
    let len = rx_buffer.len();
    unsafe { state.rx_buf.init(rx_buffer.as_mut_ptr(), len) };

    // From the datasheet:
    // "The transmit interrupt is based on a transition through a level, rather
    // than on the level itself. When the interrupt and the UART is enabled
    // before any data is written to the transmit FIFO the interrupt is not set.
    // The interrupt is only set, after written data leaves the single location
    // of the transmit FIFO and it becomes empty."
    //
    // This means we can leave the interrupt enabled the whole time as long as
    // we clear it after it happens. The downside is that the we manually have
    // to pend the ISR when we want data transmission to start.
    let regs = T::regs();
    regs.uartimsc().write(|w| {
        w.set_rxim(true);
        w.set_rtim(true);
        w.set_txim(true);
    });

    T::Interrupt::unpend();
    unsafe { T::Interrupt::enable() };
}

impl<'d, T: Instance> BufferedUart<'d, T> {
    pub fn new(
        _uart: impl Peripheral<P = T> + 'd,
        irq: impl Binding<T::Interrupt, BufferedInterruptHandler<T>>,
        tx: impl Peripheral<P = impl TxPin<T>> + 'd,
        rx: impl Peripheral<P = impl RxPin<T>> + 'd,
        tx_buffer: &'d mut [u8],
        rx_buffer: &'d mut [u8],
        config: Config,
    ) -> Self {
        into_ref!(tx, rx);

        super::Uart::<'d, T, Async>::init(Some(tx.map_into()), Some(rx.map_into()), None, None, config);
        init_buffers::<T>(irq, tx_buffer, rx_buffer);

        Self {
            rx: BufferedUartRx { phantom: PhantomData },
            tx: BufferedUartTx { phantom: PhantomData },
        }
    }

    pub fn new_with_rtscts(
        _uart: impl Peripheral<P = T> + 'd,
        irq: impl Binding<T::Interrupt, BufferedInterruptHandler<T>>,
        tx: impl Peripheral<P = impl TxPin<T>> + 'd,
        rx: impl Peripheral<P = impl RxPin<T>> + 'd,
        rts: impl Peripheral<P = impl RtsPin<T>> + 'd,
        cts: impl Peripheral<P = impl CtsPin<T>> + 'd,
        tx_buffer: &'d mut [u8],
        rx_buffer: &'d mut [u8],
        config: Config,
    ) -> Self {
        into_ref!(tx, rx, cts, rts);

        super::Uart::<'d, T, Async>::init(
            Some(tx.map_into()),
            Some(rx.map_into()),
            Some(rts.map_into()),
            Some(cts.map_into()),
            config,
        );
        init_buffers::<T>(irq, tx_buffer, rx_buffer);

        Self {
            rx: BufferedUartRx { phantom: PhantomData },
            tx: BufferedUartTx { phantom: PhantomData },
        }
    }

    pub fn blocking_write(&mut self, buffer: &[u8]) -> Result<usize, Error> {
        self.tx.blocking_write(buffer)
    }

    pub fn blocking_flush(&mut self) -> Result<(), Error> {
        self.tx.blocking_flush()
    }

    pub fn blocking_read(&mut self, buffer: &mut [u8]) -> Result<usize, Error> {
        self.rx.blocking_read(buffer)
    }

    pub fn busy(&self) -> bool {
        self.tx.busy()
    }

    pub async fn send_break(&mut self, bits: u32) {
        self.tx.send_break(bits).await
    }

    pub fn split(self) -> (BufferedUartRx<'d, T>, BufferedUartTx<'d, T>) {
        (self.rx, self.tx)
    }
}

impl<'d, T: Instance> BufferedUartRx<'d, T> {
    pub fn new(
        _uart: impl Peripheral<P = T> + 'd,
        irq: impl Binding<T::Interrupt, BufferedInterruptHandler<T>>,
        rx: impl Peripheral<P = impl RxPin<T>> + 'd,
        rx_buffer: &'d mut [u8],
        config: Config,
    ) -> Self {
        into_ref!(rx);

        super::Uart::<'d, T, Async>::init(None, Some(rx.map_into()), None, None, config);
        init_buffers::<T>(irq, &mut [], rx_buffer);

        Self { phantom: PhantomData }
    }

    pub fn new_with_rts(
        _uart: impl Peripheral<P = T> + 'd,
        irq: impl Binding<T::Interrupt, BufferedInterruptHandler<T>>,
        rx: impl Peripheral<P = impl RxPin<T>> + 'd,
        rts: impl Peripheral<P = impl RtsPin<T>> + 'd,
        rx_buffer: &'d mut [u8],
        config: Config,
    ) -> Self {
        into_ref!(rx, rts);

        super::Uart::<'d, T, Async>::init(None, Some(rx.map_into()), Some(rts.map_into()), None, config);
        init_buffers::<T>(irq, &mut [], rx_buffer);

        Self { phantom: PhantomData }
    }

    fn read<'a>(buf: &'a mut [u8]) -> impl Future<Output = Result<usize, Error>> + 'a
    where
        T: 'd,
    {
        poll_fn(move |cx| {
            if let Poll::Ready(r) = Self::try_read(buf) {
                return Poll::Ready(r);
            }
            T::buffered_state().rx_waker.register(cx.waker());
            Poll::Pending
        })
    }

    fn get_rx_error() -> Option<Error> {
        let errs = T::buffered_state().rx_error.swap(0, Ordering::Relaxed);
        if errs & RXE_OVERRUN != 0 {
            Some(Error::Overrun)
        } else if errs & RXE_BREAK != 0 {
            Some(Error::Break)
        } else if errs & RXE_PARITY != 0 {
            Some(Error::Parity)
        } else if errs & RXE_FRAMING != 0 {
            Some(Error::Framing)
        } else {
            None
        }
    }

    fn try_read(buf: &mut [u8]) -> Poll<Result<usize, Error>>
    where
        T: 'd,
    {
        if buf.is_empty() {
            return Poll::Ready(Ok(0));
        }

        let state = T::buffered_state();
        let mut rx_reader = unsafe { state.rx_buf.reader() };
        let n = rx_reader.pop(|data| {
            let n = data.len().min(buf.len());
            buf[..n].copy_from_slice(&data[..n]);
            n
        });

        let result = if n == 0 {
            match Self::get_rx_error() {
                None => return Poll::Pending,
                Some(e) => Err(e),
            }
        } else {
            Ok(n)
        };

        // (Re-)Enable the interrupt to receive more data in case it was
        // disabled because the buffer was full or errors were detected.
        let regs = T::regs();
        regs.uartimsc().write_set(|w| {
            w.set_rxim(true);
            w.set_rtim(true);
        });

        Poll::Ready(result)
    }

    pub fn blocking_read(&mut self, buf: &mut [u8]) -> Result<usize, Error> {
        loop {
            match Self::try_read(buf) {
                Poll::Ready(res) => return res,
                Poll::Pending => continue,
            }
        }
    }

    fn fill_buf<'a>() -> impl Future<Output = Result<&'a [u8], Error>>
    where
        T: 'd,
    {
        poll_fn(move |cx| {
            let state = T::buffered_state();
            let mut rx_reader = unsafe { state.rx_buf.reader() };
            let (p, n) = rx_reader.pop_buf();
            let result = if n == 0 {
                match Self::get_rx_error() {
                    None => {
                        state.rx_waker.register(cx.waker());
                        return Poll::Pending;
                    }
                    Some(e) => Err(e),
                }
            } else {
                let buf = unsafe { slice::from_raw_parts(p, n) };
                Ok(buf)
            };

            Poll::Ready(result)
        })
    }

    fn consume(amt: usize) {
        let state = T::buffered_state();
        let mut rx_reader = unsafe { state.rx_buf.reader() };
        rx_reader.pop_done(amt);

        // (Re-)Enable the interrupt to receive more data in case it was
        // disabled because the buffer was full or errors were detected.
        let regs = T::regs();
        regs.uartimsc().write_set(|w| {
            w.set_rxim(true);
            w.set_rtim(true);
        });
    }
}

impl<'d, T: Instance> BufferedUartTx<'d, T> {
    pub fn new(
        _uart: impl Peripheral<P = T> + 'd,
        irq: impl Binding<T::Interrupt, BufferedInterruptHandler<T>>,
        tx: impl Peripheral<P = impl TxPin<T>> + 'd,
        tx_buffer: &'d mut [u8],
        config: Config,
    ) -> Self {
        into_ref!(tx);

        super::Uart::<'d, T, Async>::init(Some(tx.map_into()), None, None, None, config);
        init_buffers::<T>(irq, tx_buffer, &mut []);

        Self { phantom: PhantomData }
    }

    pub fn new_with_cts(
        _uart: impl Peripheral<P = T> + 'd,
        irq: impl Binding<T::Interrupt, BufferedInterruptHandler<T>>,
        tx: impl Peripheral<P = impl TxPin<T>> + 'd,
        cts: impl Peripheral<P = impl CtsPin<T>> + 'd,
        tx_buffer: &'d mut [u8],
        config: Config,
    ) -> Self {
        into_ref!(tx, cts);

        super::Uart::<'d, T, Async>::init(Some(tx.map_into()), None, None, Some(cts.map_into()), config);
        init_buffers::<T>(irq, tx_buffer, &mut []);

        Self { phantom: PhantomData }
    }

    fn write<'a>(buf: &'a [u8]) -> impl Future<Output = Result<usize, Error>> + 'a {
        poll_fn(move |cx| {
            if buf.is_empty() {
                return Poll::Ready(Ok(0));
            }

            let state = T::buffered_state();
            let mut tx_writer = unsafe { state.tx_buf.writer() };
            let n = tx_writer.push(|data| {
                let n = data.len().min(buf.len());
                data[..n].copy_from_slice(&buf[..n]);
                n
            });
            if n == 0 {
                state.tx_waker.register(cx.waker());
                return Poll::Pending;
            }

            // The TX interrupt only triggers when the there was data in the
            // FIFO and the number of bytes drops below a threshold. When the
            // FIFO was empty we have to manually pend the interrupt to shovel
            // TX data from the buffer into the FIFO.
            T::Interrupt::pend();
            Poll::Ready(Ok(n))
        })
    }

    fn flush() -> impl Future<Output = Result<(), Error>> {
        poll_fn(move |cx| {
            let state = T::buffered_state();
            if !state.tx_buf.is_empty() {
                state.tx_waker.register(cx.waker());
                return Poll::Pending;
            }

            Poll::Ready(Ok(()))
        })
    }

    pub fn blocking_write(&mut self, buf: &[u8]) -> Result<usize, Error> {
        if buf.is_empty() {
            return Ok(0);
        }

        loop {
            let state = T::buffered_state();
            let mut tx_writer = unsafe { state.tx_buf.writer() };
            let n = tx_writer.push(|data| {
                let n = data.len().min(buf.len());
                data[..n].copy_from_slice(&buf[..n]);
                n
            });

            if n != 0 {
                // The TX interrupt only triggers when the there was data in the
                // FIFO and the number of bytes drops below a threshold. When the
                // FIFO was empty we have to manually pend the interrupt to shovel
                // TX data from the buffer into the FIFO.
                T::Interrupt::pend();
                return Ok(n);
            }
        }
    }

    pub fn blocking_flush(&mut self) -> Result<(), Error> {
        loop {
            let state = T::buffered_state();
            if state.tx_buf.is_empty() {
                return Ok(());
            }
        }
    }

    pub fn busy(&self) -> bool {
        T::regs().uartfr().read().busy()
    }

    /// Assert a break condition after waiting for the transmit buffers to empty,
    /// for the specified number of bit times. This condition must be asserted
    /// for at least two frame times to be effective, `bits` will adjusted
    /// according to frame size, parity, and stop bit settings to ensure this.
    ///
    /// This method may block for a long amount of time since it has to wait
    /// for the transmit fifo to empty, which may take a while on slow links.
    pub async fn send_break(&mut self, bits: u32) {
        let regs = T::regs();
        let bits = bits.max({
            let lcr = regs.uartlcr_h().read();
            let width = lcr.wlen() as u32 + 5;
            let parity = lcr.pen() as u32;
            let stops = 1 + lcr.stp2() as u32;
            2 * (1 + width + parity + stops)
        });
        let divx64 = (((regs.uartibrd().read().baud_divint() as u32) << 6)
            + regs.uartfbrd().read().baud_divfrac() as u32) as u64;
        let div_clk = clk_peri_freq() as u64 * 64;
        let wait_usecs = (1_000_000 * bits as u64 * divx64 * 16 + div_clk - 1) / div_clk;

        Self::flush().await.unwrap();
        while self.busy() {}
        regs.uartlcr_h().write_set(|w| w.set_brk(true));
        Timer::after_micros(wait_usecs).await;
        regs.uartlcr_h().write_clear(|w| w.set_brk(true));
    }
}

impl<'d, T: Instance> Drop for BufferedUartRx<'d, T> {
    fn drop(&mut self) {
        let state = T::buffered_state();
        unsafe { state.rx_buf.deinit() }

        // TX is inactive if the the buffer is not available.
        // We can now unregister the interrupt handler
        if state.tx_buf.len() == 0 {
            T::Interrupt::disable();
        }
    }
}

impl<'d, T: Instance> Drop for BufferedUartTx<'d, T> {
    fn drop(&mut self) {
        let state = T::buffered_state();
        unsafe { state.tx_buf.deinit() }

        // RX is inactive if the the buffer is not available.
        // We can now unregister the interrupt handler
        if state.rx_buf.len() == 0 {
            T::Interrupt::disable();
        }
    }
}

pub struct BufferedInterruptHandler<T: Instance> {
    _uart: PhantomData<T>,
}

impl<T: Instance> interrupt::typelevel::Handler<T::Interrupt> for BufferedInterruptHandler<T> {
    unsafe fn on_interrupt() {
        let r = T::regs();
        if r.uartdmacr().read().rxdmae() {
            return;
        }

        let s = T::buffered_state();

        // Clear TX and error interrupt flags
        // RX interrupt flags are cleared by reading from the FIFO.
        let ris = r.uartris().read();
        r.uarticr().write(|w| {
            w.set_txic(ris.txris());
            w.set_feic(ris.feris());
            w.set_peic(ris.peris());
            w.set_beic(ris.beris());
            w.set_oeic(ris.oeris());
        });

        // Errors
        if ris.feris() {
            warn!("Framing error");
        }
        if ris.peris() {
            warn!("Parity error");
        }
        if ris.beris() {
            warn!("Break error");
        }
        if ris.oeris() {
            warn!("Overrun error");
        }

        // RX
        let mut rx_writer = unsafe { s.rx_buf.writer() };
        let rx_buf = rx_writer.push_slice();
        let mut n_read = 0;
        let mut error = false;
        for rx_byte in rx_buf {
            if r.uartfr().read().rxfe() {
                break;
            }
            let dr = r.uartdr().read();
            if (dr.0 >> 8) != 0 {
                s.rx_error.fetch_or((dr.0 >> 8) as u8, Ordering::Relaxed);
                error = true;
                // only fill the buffer with valid characters. the current character is fine
                // if the error is an overrun, but if we add it to the buffer we'll report
                // the overrun one character too late. drop it instead and pretend we were
                // a bit slower at draining the rx fifo than we actually were.
                // this is consistent with blocking uart error reporting.
                break;
            }
            *rx_byte = dr.data();
            n_read += 1;
        }
        if n_read > 0 {
            rx_writer.push_done(n_read);
            s.rx_waker.wake();
        } else if error {
            s.rx_waker.wake();
        }
        // Disable any further RX interrupts when the buffer becomes full or
        // errors have occurred. This lets us buffer additional errors in the
        // fifo without needing more error storage locations, and most applications
        // will want to do a full reset of their uart state anyway once an error
        // has happened.
        if s.rx_buf.is_full() || error {
            r.uartimsc().write_clear(|w| {
                w.set_rxim(true);
                w.set_rtim(true);
            });
        }

        // TX
        let mut tx_reader = unsafe { s.tx_buf.reader() };
        let tx_buf = tx_reader.pop_slice();
        let mut n_written = 0;
        for tx_byte in tx_buf.iter_mut() {
            if r.uartfr().read().txff() {
                break;
            }
            r.uartdr().write(|w| w.set_data(*tx_byte));
            n_written += 1;
        }
        if n_written > 0 {
            tx_reader.pop_done(n_written);
            s.tx_waker.wake();
        }
        // The TX interrupt only triggers once when the FIFO threshold is
        // crossed. No need to disable it when the buffer becomes empty
        // as it does re-trigger anymore once we have cleared it.
    }
}

impl embedded_io::Error for Error {
    fn kind(&self) -> embedded_io::ErrorKind {
        embedded_io::ErrorKind::Other
    }
}

impl<'d, T: Instance> embedded_io_async::ErrorType for BufferedUart<'d, T> {
    type Error = Error;
}

impl<'d, T: Instance> embedded_io_async::ErrorType for BufferedUartRx<'d, T> {
    type Error = Error;
}

impl<'d, T: Instance> embedded_io_async::ErrorType for BufferedUartTx<'d, T> {
    type Error = Error;
}

impl<'d, T: Instance + 'd> embedded_io_async::Read for BufferedUart<'d, T> {
    async fn read(&mut self, buf: &mut [u8]) -> Result<usize, Self::Error> {
        BufferedUartRx::<'d, T>::read(buf).await
    }
}

impl<'d, T: Instance + 'd> embedded_io_async::Read for BufferedUartRx<'d, T> {
    async fn read(&mut self, buf: &mut [u8]) -> Result<usize, Self::Error> {
        Self::read(buf).await
    }
}

impl<'d, T: Instance + 'd> embedded_io_async::BufRead for BufferedUart<'d, T> {
    async fn fill_buf(&mut self) -> Result<&[u8], Self::Error> {
        BufferedUartRx::<'d, T>::fill_buf().await
    }

    fn consume(&mut self, amt: usize) {
        BufferedUartRx::<'d, T>::consume(amt)
    }
}

impl<'d, T: Instance + 'd> embedded_io_async::BufRead for BufferedUartRx<'d, T> {
    async fn fill_buf(&mut self) -> Result<&[u8], Self::Error> {
        Self::fill_buf().await
    }

    fn consume(&mut self, amt: usize) {
        Self::consume(amt)
    }
}

impl<'d, T: Instance + 'd> embedded_io_async::Write for BufferedUart<'d, T> {
    async fn write(&mut self, buf: &[u8]) -> Result<usize, Self::Error> {
        BufferedUartTx::<'d, T>::write(buf).await
    }

    async fn flush(&mut self) -> Result<(), Self::Error> {
        BufferedUartTx::<'d, T>::flush().await
    }
}

impl<'d, T: Instance + 'd> embedded_io_async::Write for BufferedUartTx<'d, T> {
    async fn write(&mut self, buf: &[u8]) -> Result<usize, Self::Error> {
        Self::write(buf).await
    }

    async fn flush(&mut self) -> Result<(), Self::Error> {
        Self::flush().await
    }
}

impl<'d, T: Instance + 'd> embedded_io::Read for BufferedUart<'d, T> {
    fn read(&mut self, buf: &mut [u8]) -> Result<usize, Self::Error> {
        self.rx.blocking_read(buf)
    }
}

impl<'d, T: Instance + 'd> embedded_io::Read for BufferedUartRx<'d, T> {
    fn read(&mut self, buf: &mut [u8]) -> Result<usize, Self::Error> {
        self.blocking_read(buf)
    }
}

impl<'d, T: Instance + 'd> embedded_io::Write for BufferedUart<'d, T> {
    fn write(&mut self, buf: &[u8]) -> Result<usize, Self::Error> {
        self.tx.blocking_write(buf)
    }

    fn flush(&mut self) -> Result<(), Self::Error> {
        self.tx.blocking_flush()
    }
}

impl<'d, T: Instance + 'd> embedded_io::Write for BufferedUartTx<'d, T> {
    fn write(&mut self, buf: &[u8]) -> Result<usize, Self::Error> {
        self.blocking_write(buf)
    }

    fn flush(&mut self) -> Result<(), Self::Error> {
        self.blocking_flush()
    }
}

mod eh02 {
    use super::*;

    impl<'d, T: Instance> embedded_hal_02::serial::Read<u8> for BufferedUartRx<'d, T> {
        type Error = Error;

        fn read(&mut self) -> Result<u8, nb::Error<Self::Error>> {
            let r = T::regs();
            if r.uartfr().read().rxfe() {
                return Err(nb::Error::WouldBlock);
            }

            let dr = r.uartdr().read();

            if dr.oe() {
                Err(nb::Error::Other(Error::Overrun))
            } else if dr.be() {
                Err(nb::Error::Other(Error::Break))
            } else if dr.pe() {
                Err(nb::Error::Other(Error::Parity))
            } else if dr.fe() {
                Err(nb::Error::Other(Error::Framing))
            } else {
                Ok(dr.data())
            }
        }
    }

    impl<'d, T: Instance> embedded_hal_02::blocking::serial::Write<u8> for BufferedUartTx<'d, T> {
        type Error = Error;

        fn bwrite_all(&mut self, mut buffer: &[u8]) -> Result<(), Self::Error> {
            while !buffer.is_empty() {
                match self.blocking_write(buffer) {
                    Ok(0) => panic!("zero-length write."),
                    Ok(n) => buffer = &buffer[n..],
                    Err(e) => return Err(e),
                }
            }
            Ok(())
        }

        fn bflush(&mut self) -> Result<(), Self::Error> {
            self.blocking_flush()
        }
    }

    impl<'d, T: Instance> embedded_hal_02::serial::Read<u8> for BufferedUart<'d, T> {
        type Error = Error;

        fn read(&mut self) -> Result<u8, nb::Error<Self::Error>> {
            embedded_hal_02::serial::Read::read(&mut self.rx)
        }
    }

    impl<'d, T: Instance> embedded_hal_02::blocking::serial::Write<u8> for BufferedUart<'d, T> {
        type Error = Error;

        fn bwrite_all(&mut self, mut buffer: &[u8]) -> Result<(), Self::Error> {
            while !buffer.is_empty() {
                match self.blocking_write(buffer) {
                    Ok(0) => panic!("zero-length write."),
                    Ok(n) => buffer = &buffer[n..],
                    Err(e) => return Err(e),
                }
            }
            Ok(())
        }

        fn bflush(&mut self) -> Result<(), Self::Error> {
            self.blocking_flush()
        }
    }
}

#[cfg(feature = "unstable-traits")]
mod eh1 {
    use super::*;

    impl<'d, T: Instance> embedded_hal_nb::serial::ErrorType for BufferedUartRx<'d, T> {
        type Error = Error;
    }

    impl<'d, T: Instance> embedded_hal_nb::serial::ErrorType for BufferedUartTx<'d, T> {
        type Error = Error;
    }

    impl<'d, T: Instance> embedded_hal_nb::serial::ErrorType for BufferedUart<'d, T> {
        type Error = Error;
    }

    impl<'d, T: Instance> embedded_hal_nb::serial::Read for BufferedUartRx<'d, T> {
        fn read(&mut self) -> nb::Result<u8, Self::Error> {
            embedded_hal_02::serial::Read::read(self)
        }
    }

    impl<'d, T: Instance> embedded_hal_nb::serial::Write for BufferedUartTx<'d, T> {
        fn write(&mut self, char: u8) -> nb::Result<(), Self::Error> {
            self.blocking_write(&[char]).map(drop).map_err(nb::Error::Other)
        }

        fn flush(&mut self) -> nb::Result<(), Self::Error> {
            self.blocking_flush().map_err(nb::Error::Other)
        }
    }

    impl<'d, T: Instance> embedded_hal_nb::serial::Read for BufferedUart<'d, T> {
        fn read(&mut self) -> Result<u8, nb::Error<Self::Error>> {
            embedded_hal_02::serial::Read::read(&mut self.rx)
        }
    }

    impl<'d, T: Instance> embedded_hal_nb::serial::Write for BufferedUart<'d, T> {
        fn write(&mut self, char: u8) -> nb::Result<(), Self::Error> {
            self.blocking_write(&[char]).map(drop).map_err(nb::Error::Other)
        }

        fn flush(&mut self) -> nb::Result<(), Self::Error> {
            self.blocking_flush().map_err(nb::Error::Other)
        }
    }
}