1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
|
//! This example runs on the RAK4631 WisBlock, which has an nRF52840 MCU and Semtech Sx126x radio.
//! Other nrf/sx126x combinations may work with appropriate pin modifications.
//! It demonstrates LoRaWAN join functionality.
#![no_std]
#![no_main]
#![macro_use]
#![feature(type_alias_impl_trait)]
use defmt::*;
use embassy_executor::Spawner;
use embassy_lora::iv::GenericSx126xInterfaceVariant;
use embassy_lora::LoraTimer;
use embassy_nrf::gpio::{Input, Level, Output, OutputDrive, Pin as _, Pull};
use embassy_nrf::rng::Rng;
use embassy_nrf::{bind_interrupts, peripherals, rng, spim};
use embassy_time::Delay;
use lora_phy::mod_params::*;
use lora_phy::sx1261_2::SX1261_2;
use lora_phy::LoRa;
use lorawan::default_crypto::DefaultFactory as Crypto;
use lorawan_device::async_device::lora_radio::LoRaRadio;
use lorawan_device::async_device::{region, Device, JoinMode};
use {defmt_rtt as _, panic_probe as _};
const LORAWAN_REGION: region::Region = region::Region::EU868; // warning: set this appropriately for the region
bind_interrupts!(struct Irqs {
SPIM1_SPIS1_TWIM1_TWIS1_SPI1_TWI1 => spim::InterruptHandler<peripherals::TWISPI1>;
RNG => rng::InterruptHandler<peripherals::RNG>;
});
#[embassy_executor::main]
async fn main(_spawner: Spawner) {
let p = embassy_nrf::init(Default::default());
let mut spi_config = spim::Config::default();
spi_config.frequency = spim::Frequency::M16;
let spim = spim::Spim::new(p.TWISPI1, Irqs, p.P1_11, p.P1_13, p.P1_12, spi_config);
let nss = Output::new(p.P1_10.degrade(), Level::High, OutputDrive::Standard);
let reset = Output::new(p.P1_06.degrade(), Level::High, OutputDrive::Standard);
let dio1 = Input::new(p.P1_15.degrade(), Pull::Down);
let busy = Input::new(p.P1_14.degrade(), Pull::Down);
let rf_switch_rx = Output::new(p.P1_05.degrade(), Level::Low, OutputDrive::Standard);
let rf_switch_tx = Output::new(p.P1_07.degrade(), Level::Low, OutputDrive::Standard);
let iv =
GenericSx126xInterfaceVariant::new(nss, reset, dio1, busy, Some(rf_switch_rx), Some(rf_switch_tx)).unwrap();
let mut delay = Delay;
let lora = {
match LoRa::new(SX1261_2::new(BoardType::Rak4631Sx1262, spim, iv), true, &mut delay).await {
Ok(l) => l,
Err(err) => {
info!("Radio error = {}", err);
return;
}
}
};
let radio = LoRaRadio::new(lora);
let region: region::Configuration = region::Configuration::new(LORAWAN_REGION);
let mut device: Device<_, Crypto, _, _> = Device::new(region, radio, LoraTimer::new(), Rng::new(p.RNG, Irqs));
defmt::info!("Joining LoRaWAN network");
// TODO: Adjust the EUI and Keys according to your network credentials
match device
.join(&JoinMode::OTAA {
deveui: [0, 0, 0, 0, 0, 0, 0, 0],
appeui: [0, 0, 0, 0, 0, 0, 0, 0],
appkey: [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
})
.await
{
Ok(()) => defmt::info!("LoRaWAN network joined"),
Err(err) => {
info!("Radio error = {}", err);
return;
}
};
}
|
