1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
|
#![no_std]
#![no_main]
use defmt::*;
use embassy_executor::Spawner;
use embassy_stm32::adc::vals::Scandir;
use embassy_stm32::adc::{Adc, AdcChannel, AnyAdcChannel, Resolution, SampleTime};
use embassy_stm32::peripherals::ADC1;
use embassy_time::Timer;
use {defmt_rtt as _, panic_probe as _};
#[embassy_executor::main]
async fn main(_spawner: Spawner) {
let config = Default::default();
let p = embassy_stm32::init(config);
info!("ADC STM32C0 example.");
// We need to set certain sample time to be able to read temp sensor.
let mut adc = Adc::new(p.ADC1, SampleTime::CYCLES12_5, Resolution::BITS12);
let mut temp = adc.enable_temperature().degrade_adc();
let mut vref = adc.enable_vrefint().degrade_adc();
let mut pin0 = p.PA0.degrade_adc();
let mut dma = p.DMA1_CH1;
let mut read_buffer: [u16; 3] = [0; 3];
loop {
info!("============================");
let blocking_temp = adc.blocking_read(&mut temp);
let blocking_vref = adc.blocking_read(&mut vref);
let blocing_pin0 = adc.blocking_read(&mut pin0);
info!(
"Blocking ADC read: vref = {}, temp = {}, pin0 = {}.",
blocking_vref, blocking_temp, blocing_pin0
);
let channels_seqence: [&mut AnyAdcChannel<ADC1>; 3] = [&mut vref, &mut temp, &mut pin0];
adc.read(dma.reborrow(), channels_seqence.into_iter(), &mut read_buffer)
.await;
// Values are ordered according to hardware ADC channel number!
info!(
"DMA ADC read in set: vref = {}, temp = {}, pin0 = {}.",
read_buffer[0], read_buffer[1], read_buffer[2]
);
let hw_channel_selection: u32 =
(1 << temp.get_hw_channel()) + (1 << vref.get_hw_channel()) + (1 << pin0.get_hw_channel());
adc.read_in_hw_order(dma.reborrow(), hw_channel_selection, Scandir::UP, &mut read_buffer)
.await;
info!(
"DMA ADC read in hardware order: vref = {}, temp = {}, pin0 = {}.",
read_buffer[2], read_buffer[1], read_buffer[0]
);
Timer::after_millis(2000).await;
}
}
|
