path: root/examples/stm32f7/src/bin/qspi.rs

#![no_std]
#![no_main]
#![allow(dead_code)] // Allow dead code as not all commands are used in the example

use defmt::info;
use embassy_executor::Spawner;
use embassy_stm32::Config as StmCfg;
use embassy_stm32::mode::Async;
use embassy_stm32::qspi::enums::{AddressSize, ChipSelectHighTime, FIFOThresholdLevel, MemorySize, *};
use embassy_stm32::qspi::{Config as QspiCfg, Instance, Qspi, TransferConfig};
use embassy_stm32::time::mhz;
use {defmt_rtt as _, panic_probe as _};

const MEMORY_PAGE_SIZE: usize = 256;

const CMD_READ: u8 = 0x03;
const CMD_HS_READ: u8 = 0x0B;
const CMD_QUAD_READ: u8 = 0x6B;

const CMD_WRITE_PG: u8 = 0xF2;
const CMD_QUAD_WRITE_PG: u8 = 0x32;

const CMD_READ_ID: u8 = 0x9F;
const CMD_READ_UUID: u8 = 0x4B;

const CMD_ENABLE_RESET: u8 = 0x66;
const CMD_RESET: u8 = 0x99;

const CMD_WRITE_ENABLE: u8 = 0x06;
const CMD_WRITE_DISABLE: u8 = 0x04;

const CMD_CHIP_ERASE: u8 = 0xC7;
const CMD_SECTOR_ERASE: u8 = 0x20;
const CMD_BLOCK_ERASE_32K: u8 = 0x52;
const CMD_BLOCK_ERASE_64K: u8 = 0xD8;

const CMD_READ_SR: u8 = 0x05;
const CMD_READ_CR: u8 = 0x35;

const CMD_WRITE_SR: u8 = 0x01;
const CMD_WRITE_CR: u8 = 0x31;
const MEMORY_ADDR: u32 = 0x00000000u32;

/// Implementation of access to flash chip.
/// Chip commands are hardcoded as it depends on used chip.
/// This implementation is using chip GD25Q64C from Giga Device
pub struct FlashMemory<I: Instance> {
    qspi: Qspi<'static, I, Async>,
}

impl<I: Instance> FlashMemory<I> {
    pub fn new(qspi: Qspi<'static, I, Async>) -> Self {
        let mut memory = Self { qspi };

        memory.reset_memory();
        memory.enable_quad();

        memory
    }

    fn enable_quad(&mut self) {
        let cr = self.read_cr();
        self.write_cr(cr | 0x02);
    }

    fn exec_command(&mut self, cmd: u8) {
        let transaction = TransferConfig {
            iwidth: QspiWidth::SING,
            awidth: QspiWidth::NONE,
            dwidth: QspiWidth::NONE,
            instruction: cmd,
            address: None,
            dummy: DummyCycles::_0,
        };
        self.qspi.blocking_command(transaction);
    }

    pub fn reset_memory(&mut self) {
        self.exec_command(CMD_ENABLE_RESET);
        self.exec_command(CMD_RESET);
        self.wait_write_finish();
    }

    pub fn enable_write(&mut self) {
        self.exec_command(CMD_WRITE_ENABLE);
    }

    pub fn read_id(&mut self) -> [u8; 3] {
        let mut buffer = [0; 3];
        let transaction: TransferConfig = TransferConfig {
            iwidth: QspiWidth::SING,
            awidth: QspiWidth::NONE,
            dwidth: QspiWidth::SING,
            instruction: CMD_READ_ID,
            address: None,
            dummy: DummyCycles::_0,
        };
        self.qspi.blocking_read(&mut buffer, transaction);
        buffer
    }

    pub fn read_uuid(&mut self) -> [u8; 16] {
        let mut buffer = [0; 16];
        let transaction: TransferConfig = TransferConfig {
            iwidth: QspiWidth::SING,
            awidth: QspiWidth::SING,
            dwidth: QspiWidth::SING,
            instruction: CMD_READ_UUID,
            address: Some(0),
            dummy: DummyCycles::_8,
        };
        self.qspi.blocking_read(&mut buffer, transaction);
        buffer
    }

    pub fn read_memory(&mut self, addr: u32, buffer: &mut [u8], use_dma: bool) {
        let transaction = TransferConfig {
            iwidth: QspiWidth::SING,
            awidth: QspiWidth::SING,
            dwidth: QspiWidth::QUAD,
            instruction: CMD_QUAD_READ,
            address: Some(addr),
            dummy: DummyCycles::_8,
        };
        if use_dma {
            self.qspi.blocking_read_dma(buffer, transaction);
        } else {
            self.qspi.blocking_read(buffer, transaction);
        }
    }

    fn wait_write_finish(&mut self) {
        while (self.read_sr() & 0x01) != 0 {}
    }

    fn perform_erase(&mut self, addr: u32, cmd: u8) {
        let transaction = TransferConfig {
            iwidth: QspiWidth::SING,
            awidth: QspiWidth::SING,
            dwidth: QspiWidth::NONE,
            instruction: cmd,
            address: Some(addr),
            dummy: DummyCycles::_0,
        };
        self.enable_write();
        self.qspi.blocking_command(transaction);
        self.wait_write_finish();
    }

    pub fn erase_sector(&mut self, addr: u32) {
        self.perform_erase(addr, CMD_SECTOR_ERASE);
    }

    pub fn erase_block_32k(&mut self, addr: u32) {
        self.perform_erase(addr, CMD_BLOCK_ERASE_32K);
    }

    pub fn erase_block_64k(&mut self, addr: u32) {
        self.perform_erase(addr, CMD_BLOCK_ERASE_64K);
    }

    pub fn erase_chip(&mut self) {
        self.exec_command(CMD_CHIP_ERASE);
    }

    fn write_page(&mut self, addr: u32, buffer: &[u8], len: usize, use_dma: bool) {
        assert!(
            (len as u32 + (addr & 0x000000ff)) <= MEMORY_PAGE_SIZE as u32,
            "write_page(): page write length exceeds page boundary (len = {}, addr = {:X}",
            len,
            addr
        );

        let transaction = TransferConfig {
            iwidth: QspiWidth::SING,
            awidth: QspiWidth::SING,
            dwidth: QspiWidth::QUAD,
            instruction: CMD_QUAD_WRITE_PG,
            address: Some(addr),
            dummy: DummyCycles::_0,
        };
        self.enable_write();
        if use_dma {
            self.qspi.blocking_write_dma(buffer, transaction);
        } else {
            self.qspi.blocking_write(buffer, transaction);
        }
        self.wait_write_finish();
    }

    pub fn write_memory(&mut self, addr: u32, buffer: &[u8], use_dma: bool) {
        let mut left = buffer.len();
        let mut place = addr;
        let mut chunk_start = 0;

        while left > 0 {
            let max_chunk_size = MEMORY_PAGE_SIZE - (place & 0x000000ff) as usize;
            let chunk_size = if left >= max_chunk_size { max_chunk_size } else { left };
            let chunk = &buffer[chunk_start..(chunk_start + chunk_size)];
            self.write_page(place, chunk, chunk_size, use_dma);
            place += chunk_size as u32;
            left -= chunk_size;
            chunk_start += chunk_size;
        }
    }

    fn read_register(&mut self, cmd: u8) -> u8 {
        let mut buffer = [0; 1];
        let transaction: TransferConfig = TransferConfig {
            iwidth: QspiWidth::SING,
            awidth: QspiWidth::NONE,
            dwidth: QspiWidth::SING,
            instruction: cmd,
            address: None,
            dummy: DummyCycles::_0,
        };
        self.qspi.blocking_read(&mut buffer, transaction);
        buffer[0]
    }

    fn write_register(&mut self, cmd: u8, value: u8) {
        let buffer = [value; 1];
        let transaction: TransferConfig = TransferConfig {
            iwidth: QspiWidth::SING,
            awidth: QspiWidth::NONE,
            dwidth: QspiWidth::SING,
            instruction: cmd,
            address: None,
            dummy: DummyCycles::_0,
        };
        self.qspi.blocking_write(&buffer, transaction);
    }

    pub fn read_sr(&mut self) -> u8 {
        self.read_register(CMD_READ_SR)
    }

    pub fn read_cr(&mut self) -> u8 {
        self.read_register(CMD_READ_CR)
    }

    pub fn write_sr(&mut self, value: u8) {
        self.write_register(CMD_WRITE_SR, value);
    }

    pub fn write_cr(&mut self, value: u8) {
        self.write_register(CMD_WRITE_CR, value);
    }
}

#[embassy_executor::main]
async fn main(_spawner: Spawner) -> ! {
    let mut config = StmCfg::default();
    {
        use embassy_stm32::rcc::*;
        config.rcc.hse = Some(Hse {
            freq: mhz(8),
            mode: HseMode::Oscillator,
        });
        config.rcc.pll_src = PllSource::HSE;
        config.rcc.pll = Some(Pll {
            prediv: PllPreDiv::DIV4,
            mul: PllMul::MUL216,
            divp: Some(PllPDiv::DIV2), // 8mhz / 4 * 216 / 2 = 216Mhz
            divq: None,
            divr: None,
        });
        config.rcc.ahb_pre = AHBPrescaler::DIV1;
        config.rcc.apb1_pre = APBPrescaler::DIV4;
        config.rcc.apb2_pre = APBPrescaler::DIV2;
        config.rcc.sys = Sysclk::PLL1_P;
    }
    let p = embassy_stm32::init(config);
    info!("Embassy initialized");

    let mut config = QspiCfg::default();
    config.memory_size = MemorySize::_8MiB;
    config.address_size = AddressSize::_24bit;
    config.prescaler = 16;
    config.cs_high_time = ChipSelectHighTime::_1Cycle;
    config.fifo_threshold = FIFOThresholdLevel::_16Bytes;
    config.sample_shifting = SampleShifting::None;

    let driver = Qspi::new_bank1(
        p.QUADSPI, p.PF8, p.PF9, p.PE2, p.PF6, p.PF10, p.PB10, p.DMA2_CH7, config,
    );
    let mut flash = FlashMemory::new(driver);
    let flash_id = flash.read_id();
    info!("FLASH ID: {:?}", flash_id);
    let mut wr_buf = [0u8; 256];
    for i in 0..256 {
        wr_buf[i] = i as u8;
    }
    let mut rd_buf = [0u8; 256];
    flash.erase_sector(MEMORY_ADDR);
    flash.write_memory(MEMORY_ADDR, &wr_buf, true);
    flash.read_memory(MEMORY_ADDR, &mut rd_buf, true);
    info!("WRITE BUF: {:?}", wr_buf);
    info!("READ BUF: {:?}", rd_buf);
    info!("End of Program, proceed to empty endless loop");
    loop {}
}