1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
|
#![no_std]
#![no_main]
use defmt::{panic, *};
use embassy_executor::Spawner;
use embassy_stm32::time::Hertz;
use embassy_stm32::usb::{Driver, Instance};
use embassy_stm32::{bind_interrupts, pac, peripherals, usb, Config};
use embassy_usb::class::cdc_acm::{CdcAcmClass, State};
use embassy_usb::driver::EndpointError;
use embassy_usb::Builder;
use futures::future::join;
use {defmt_rtt as _, panic_probe as _};
bind_interrupts!(struct Irqs {
USB_DRD_FS => usb::InterruptHandler<peripherals::USB>;
});
#[embassy_executor::main]
async fn main(_spawner: Spawner) {
let mut config = Config::default();
{
use embassy_stm32::rcc::*;
config.rcc.hsi = None;
config.rcc.hsi48 = Some(Hsi48Config { sync_from_usb: true }); // needed for USB
config.rcc.hse = Some(Hse {
freq: Hertz(8_000_000),
mode: HseMode::BypassDigital,
});
config.rcc.pll1 = Some(Pll {
source: PllSource::HSE,
prediv: PllPreDiv::DIV2,
mul: PllMul::MUL125,
divp: Some(PllDiv::DIV2), // 250mhz
divq: None,
divr: None,
});
config.rcc.ahb_pre = AHBPrescaler::DIV2;
config.rcc.apb1_pre = APBPrescaler::DIV4;
config.rcc.apb2_pre = APBPrescaler::DIV2;
config.rcc.apb3_pre = APBPrescaler::DIV4;
config.rcc.sys = Sysclk::PLL1_P;
config.rcc.voltage_scale = VoltageScale::Scale0;
}
let p = embassy_stm32::init(config);
info!("Hello World!");
pac::RCC.ccipr4().write(|w| {
w.set_usbsel(pac::rcc::vals::Usbsel::HSI48);
});
// Create the driver, from the HAL.
let driver = Driver::new(p.USB, Irqs, p.PA12, p.PA11);
// Create embassy-usb Config
let mut config = embassy_usb::Config::new(0xc0de, 0xcafe);
config.manufacturer = Some("Embassy");
config.product = Some("USB-serial example");
config.serial_number = Some("12345678");
// Required for windows compatibility.
// https://developer.nordicsemi.com/nRF_Connect_SDK/doc/1.9.1/kconfig/CONFIG_CDC_ACM_IAD.html#help
config.device_class = 0xEF;
config.device_sub_class = 0x02;
config.device_protocol = 0x01;
config.composite_with_iads = true;
// Create embassy-usb DeviceBuilder using the driver and config.
// It needs some buffers for building the descriptors.
let mut device_descriptor = [0; 256];
let mut config_descriptor = [0; 256];
let mut bos_descriptor = [0; 256];
let mut control_buf = [0; 64];
let mut state = State::new();
let mut builder = Builder::new(
driver,
config,
&mut device_descriptor,
&mut config_descriptor,
&mut bos_descriptor,
&mut [], // no msos descriptors
&mut control_buf,
);
// Create classes on the builder.
let mut class = CdcAcmClass::new(&mut builder, &mut state, 64);
// Build the builder.
let mut usb = builder.build();
// Run the USB device.
let usb_fut = usb.run();
// Do stuff with the class!
let echo_fut = async {
loop {
class.wait_connection().await;
info!("Connected");
let _ = echo(&mut class).await;
info!("Disconnected");
}
};
// Run everything concurrently.
// If we had made everything `'static` above instead, we could do this using separate tasks instead.
join(usb_fut, echo_fut).await;
}
struct Disconnected {}
impl From<EndpointError> for Disconnected {
fn from(val: EndpointError) -> Self {
match val {
EndpointError::BufferOverflow => panic!("Buffer overflow"),
EndpointError::Disabled => Disconnected {},
}
}
}
async fn echo<'d, T: Instance + 'd>(class: &mut CdcAcmClass<'d, Driver<'d, T>>) -> Result<(), Disconnected> {
let mut buf = [0; 64];
loop {
let n = class.read_packet(&mut buf).await?;
let data = &buf[..n];
info!("data: {:x}", data);
class.write_packet(data).await?;
}
}
|
