1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
|
//! This example runs on a STM32WL board, which has a builtin Semtech Sx1262 radio.
//! It demonstrates LoRaWAN join functionality.
#![no_std]
#![no_main]
#![macro_use]
#![feature(type_alias_impl_trait, async_fn_in_trait)]
use defmt::info;
use embassy_executor::Spawner;
use embassy_lora::iv::{InterruptHandler, Stm32wlInterfaceVariant};
use embassy_lora::LoraTimer;
use embassy_stm32::gpio::{Level, Output, Pin, Speed};
use embassy_stm32::rng::{self, Rng};
use embassy_stm32::spi::Spi;
use embassy_stm32::{bind_interrupts, pac, peripherals};
use embassy_time::Delay;
use lora_phy::mod_params::*;
use lora_phy::sx1261_2::SX1261_2;
use lora_phy::LoRa;
use lorawan::default_crypto::DefaultFactory as Crypto;
use lorawan_device::async_device::lora_radio::LoRaRadio;
use lorawan_device::async_device::{region, Device, JoinMode};
use {defmt_rtt as _, panic_probe as _};
const LORAWAN_REGION: region::Region = region::Region::EU868; // warning: set this appropriately for the region
bind_interrupts!(struct Irqs{
SUBGHZ_RADIO => InterruptHandler;
RNG => rng::InterruptHandler<peripherals::RNG>;
});
#[embassy_executor::main]
async fn main(_spawner: Spawner) {
let mut config = embassy_stm32::Config::default();
config.rcc.mux = embassy_stm32::rcc::ClockSrc::HSE32;
config.rcc.enable_lsi = true; // enable RNG
let p = embassy_stm32::init(config);
pac::RCC.ccipr().modify(|w| w.set_rngsel(0b01));
let spi = Spi::new_subghz(p.SUBGHZSPI, p.DMA1_CH1, p.DMA1_CH2);
// Set CTRL1 and CTRL3 for high-power transmission, while CTRL2 acts as an RF switch between tx and rx
let _ctrl1 = Output::new(p.PC4.degrade(), Level::Low, Speed::High);
let ctrl2 = Output::new(p.PC5.degrade(), Level::High, Speed::High);
let _ctrl3 = Output::new(p.PC3.degrade(), Level::High, Speed::High);
let iv = Stm32wlInterfaceVariant::new(Irqs, None, Some(ctrl2)).unwrap();
let mut delay = Delay;
let lora = {
match LoRa::new(SX1261_2::new(BoardType::Stm32wlSx1262, spi, iv), true, &mut delay).await {
Ok(l) => l,
Err(err) => {
info!("Radio error = {}", err);
return;
}
}
};
let radio = LoRaRadio::new(lora);
let region: region::Configuration = region::Configuration::new(LORAWAN_REGION);
let mut device: Device<_, Crypto, _, _> = Device::new(region, radio, LoraTimer::new(), Rng::new(p.RNG, Irqs));
defmt::info!("Joining LoRaWAN network");
// TODO: Adjust the EUI and Keys according to your network credentials
match device
.join(&JoinMode::OTAA {
deveui: [0, 0, 0, 0, 0, 0, 0, 0],
appeui: [0, 0, 0, 0, 0, 0, 0, 0],
appkey: [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
})
.await
{
Ok(()) => defmt::info!("LoRaWAN network joined"),
Err(err) => {
info!("Radio error = {}", err);
return;
}
};
}
|
