1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
|
//! This example runs on a STM32WL board, which has a builtin Semtech Sx1262 radio.
//! It demonstrates LORA P2P send functionality.
#![no_std]
#![no_main]
#![macro_use]
#![feature(type_alias_impl_trait, async_fn_in_trait)]
use defmt::info;
use embassy_executor::Spawner;
use embassy_lora::iv::{InterruptHandler, Stm32wlInterfaceVariant};
use embassy_stm32::bind_interrupts;
use embassy_stm32::gpio::{Level, Output, Pin, Speed};
use embassy_stm32::spi::Spi;
use embassy_time::Delay;
use lora_phy::mod_params::*;
use lora_phy::sx1261_2::SX1261_2;
use lora_phy::LoRa;
use {defmt_rtt as _, panic_probe as _};
const LORA_FREQUENCY_IN_HZ: u32 = 903_900_000; // warning: set this appropriately for the region
bind_interrupts!(struct Irqs{
SUBGHZ_RADIO => InterruptHandler;
});
#[embassy_executor::main]
async fn main(_spawner: Spawner) {
let mut config = embassy_stm32::Config::default();
config.rcc.mux = embassy_stm32::rcc::ClockSrc::HSE32;
let p = embassy_stm32::init(config);
let spi = Spi::new_subghz(p.SUBGHZSPI, p.DMA1_CH1, p.DMA1_CH2);
// Set CTRL1 and CTRL3 for high-power transmission, while CTRL2 acts as an RF switch between tx and rx
let _ctrl1 = Output::new(p.PC4.degrade(), Level::Low, Speed::High);
let ctrl2 = Output::new(p.PC5.degrade(), Level::High, Speed::High);
let _ctrl3 = Output::new(p.PC3.degrade(), Level::High, Speed::High);
let iv = Stm32wlInterfaceVariant::new(Irqs, None, Some(ctrl2)).unwrap();
let mut delay = Delay;
let mut lora = {
match LoRa::new(SX1261_2::new(BoardType::Stm32wlSx1262, spi, iv), false, &mut delay).await {
Ok(l) => l,
Err(err) => {
info!("Radio error = {}", err);
return;
}
}
};
let mdltn_params = {
match lora.create_modulation_params(
SpreadingFactor::_10,
Bandwidth::_250KHz,
CodingRate::_4_8,
LORA_FREQUENCY_IN_HZ,
) {
Ok(mp) => mp,
Err(err) => {
info!("Radio error = {}", err);
return;
}
}
};
let mut tx_pkt_params = {
match lora.create_tx_packet_params(4, false, true, false, &mdltn_params) {
Ok(pp) => pp,
Err(err) => {
info!("Radio error = {}", err);
return;
}
}
};
match lora.prepare_for_tx(&mdltn_params, 20, false).await {
Ok(()) => {}
Err(err) => {
info!("Radio error = {}", err);
return;
}
};
let buffer = [0x01u8, 0x02u8, 0x03u8];
match lora.tx(&mdltn_params, &mut tx_pkt_params, &buffer, 0xffffff).await {
Ok(()) => {
info!("TX DONE");
}
Err(err) => {
info!("Radio error = {}", err);
return;
}
};
match lora.sleep(&mut delay).await {
Ok(()) => info!("Sleep successful"),
Err(err) => info!("Sleep unsuccessful = {}", err),
}
}
|
