blob: 9ffc39948a1f3dbebb85fe07dca11acaf8434332 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
|
#![no_std]
#![no_main]
use defmt::*;
#[cfg(feature = "defmt-rtt")]
use defmt_rtt as _;
use embassy_executor::Spawner;
use embassy_stm32::exti::{self, ExtiInput};
use embassy_stm32::gpio::Pull;
use embassy_stm32::{bind_interrupts, interrupt, low_power};
use panic_probe as _;
use static_cell::StaticCell;
bind_interrupts!(
pub struct Irqs{
EXTI0 => exti::InterruptHandler<interrupt::typelevel::EXTI0>;
});
#[embassy_executor::main(executor = "low_power::Executor")]
async fn async_main(_spawner: Spawner) {
let mut config = embassy_stm32::Config::default();
// enable HSI clock
config.rcc.hsi = true;
// enable LSI clock for RTC
config.rcc.ls = embassy_stm32::rcc::LsConfig::default_lsi();
config.rcc.msi = Some(embassy_stm32::rcc::MSIRange::RANGE4M);
config.rcc.sys = embassy_stm32::rcc::Sysclk::MSI;
// enable ADC with HSI clock
config.rcc.mux.adcsel = embassy_stm32::pac::rcc::vals::Adcsel::HSI;
#[cfg(feature = "defmt-serial")]
{
// disable debug during sleep to reduce power consumption since we are
// using defmt-serial on LPUART1.
config.enable_debug_during_sleep = false;
// if we are using defmt-serial on LPUART1, we need to use HSI for the clock
// so that its registers are preserved during STOP modes.
config.rcc.mux.lpuart1sel = embassy_stm32::pac::rcc::vals::Lpuart1sel::HSI;
}
// Initialize STM32WL peripherals (use default config like wio-e5-async example)
let p = embassy_stm32::init(config);
#[cfg(feature = "defmt-serial")]
{
use embassy_stm32::mode::Blocking;
use embassy_stm32::usart::Uart;
let config = embassy_stm32::usart::Config::default();
let uart = Uart::new_blocking(p.LPUART1, p.PC0, p.PC1, config).expect("failed to configure UART!");
static SERIAL: StaticCell<Uart<'static, Blocking>> = StaticCell::new();
defmt_serial::defmt_serial(SERIAL.init(uart));
}
info!("Hello World!");
let mut button = ExtiInput::new(p.PA0, p.EXTI0, Pull::Up, Irqs);
info!("Press the USER button...");
loop {
button.wait_for_falling_edge().await;
info!("Pressed!");
button.wait_for_rising_edge().await;
info!("Released!");
}
}
|
