9 files changed, 18 insertions, 18 deletions

diff --git a/examples/stm32f4/src/bin/adc_dma.rs b/examples/stm32f4/src/bin/adc_dma.rs
index 43a761e6d..2ec48640e 100644
--- a/examples/stm32f4/src/bin/adc_dma.rs
+++ b/examples/stm32f4/src/bin/adc_dma.rs
@@ -11,7 +11,7 @@ use {defmt_rtt as _, panic_probe as _};
 #[embassy_executor::main]
 async fn main(spawner: Spawner) {
     let p = embassy_stm32::init(Default::default());
-    spawner.must_spawn(adc_task(p));
+    spawner.spawn(adc_task(p).unwrap());
 }
 
 #[embassy_executor::task]
diff --git a/examples/stm32f4/src/bin/eth.rs b/examples/stm32f4/src/bin/eth.rs
index 634d8e2c6..f41a60529 100644
--- a/examples/stm32f4/src/bin/eth.rs
+++ b/examples/stm32f4/src/bin/eth.rs
@@ -91,7 +91,7 @@ async fn main(spawner: Spawner) -> ! {
     let (stack, runner) = embassy_net::new(device, config, RESOURCES.init(StackResources::new()), seed);
 
     // Launch network task
-    unwrap!(spawner.spawn(net_task(runner)));
+    spawner.spawn(unwrap!(net_task(runner)));
 
     // Ensure DHCP configuration is up before trying connect
     stack.wait_config_up().await;
diff --git a/examples/stm32f4/src/bin/eth_w5500.rs b/examples/stm32f4/src/bin/eth_w5500.rs
index 6e6bef08c..7ce3bfe75 100644
--- a/examples/stm32f4/src/bin/eth_w5500.rs
+++ b/examples/stm32f4/src/bin/eth_w5500.rs
@@ -83,7 +83,7 @@ async fn main(spawner: Spawner) -> ! {
     let (device, runner) = embassy_net_wiznet::new(mac_addr, state, spi, w5500_int, w5500_reset)
         .await
         .unwrap();
-    unwrap!(spawner.spawn(ethernet_task(runner)));
+    spawner.spawn(unwrap!(ethernet_task(runner)));
 
     let config = embassy_net::Config::dhcpv4(Default::default());
     //let config = embassy_net::Config::ipv4_static(embassy_net::StaticConfigV4 {
@@ -96,7 +96,7 @@ async fn main(spawner: Spawner) -> ! {
     let (stack, runner) = embassy_net::new(device, config, RESOURCES.init(StackResources::new()), seed);
 
     // Launch network task
-    unwrap!(spawner.spawn(net_task(runner)));
+    spawner.spawn(unwrap!(net_task(runner)));
 
     // Ensure DHCP configuration is up before trying connect
     stack.wait_config_up().await;
diff --git a/examples/stm32f4/src/bin/flash_async.rs b/examples/stm32f4/src/bin/flash_async.rs
index 755713542..2feb9de09 100644
--- a/examples/stm32f4/src/bin/flash_async.rs
+++ b/examples/stm32f4/src/bin/flash_async.rs
@@ -21,7 +21,7 @@ async fn main(spawner: Spawner) {
     let mut f = Flash::new(p.FLASH, Irqs);
 
     // Led should blink uninterrupted during ~2sec erase operation
-    spawner.spawn(blinky(p.PB7.into())).unwrap();
+    spawner.spawn(blinky(p.PB7.into()).unwrap());
 
     // Test on bank 2 in order not to stall CPU.
     test_flash(&mut f, 1024 * 1024, 128 * 1024).await;
diff --git a/examples/stm32f4/src/bin/input_capture.rs b/examples/stm32f4/src/bin/input_capture.rs
index e15b4d26e..9998c4733 100644
--- a/examples/stm32f4/src/bin/input_capture.rs
+++ b/examples/stm32f4/src/bin/input_capture.rs
@@ -37,7 +37,7 @@ async fn main(spawner: Spawner) {
     let p = embassy_stm32::init(Default::default());
     info!("Hello World!");
 
-    unwrap!(spawner.spawn(blinky(p.PB2)));
+    spawner.spawn(unwrap!(blinky(p.PB2)));
 
     let ch3 = CapturePin::new(p.PB10, Pull::None);
     let mut ic = InputCapture::new(p.TIM2, None, None, Some(ch3), None, Irqs, khz(1000), Default::default());
diff --git a/examples/stm32f4/src/bin/multiprio.rs b/examples/stm32f4/src/bin/multiprio.rs
index b4620888f..2f2ffdea2 100644
--- a/examples/stm32f4/src/bin/multiprio.rs
+++ b/examples/stm32f4/src/bin/multiprio.rs
@@ -135,16 +135,16 @@ fn main() -> ! {
     // High-priority executor: UART4, priority level 6
     interrupt::UART4.set_priority(Priority::P6);
     let spawner = EXECUTOR_HIGH.start(interrupt::UART4);
-    unwrap!(spawner.spawn(run_high()));
+    spawner.spawn(unwrap!(run_high()));
 
     // Medium-priority executor: UART5, priority level 7
     interrupt::UART5.set_priority(Priority::P7);
     let spawner = EXECUTOR_MED.start(interrupt::UART5);
-    unwrap!(spawner.spawn(run_med()));
+    spawner.spawn(unwrap!(run_med()));
 
     // Low priority executor: runs in thread mode, using WFE/SEV
     let executor = EXECUTOR_LOW.init(Executor::new());
     executor.run(|spawner| {
-        unwrap!(spawner.spawn(run_low()));
+        spawner.spawn(unwrap!(run_low()));
     });
 }
diff --git a/examples/stm32f4/src/bin/pwm_input.rs b/examples/stm32f4/src/bin/pwm_input.rs
index 74167cbf2..e8bfa524f 100644
--- a/examples/stm32f4/src/bin/pwm_input.rs
+++ b/examples/stm32f4/src/bin/pwm_input.rs
@@ -36,7 +36,7 @@ async fn main(spawner: Spawner) {
     let p = embassy_stm32::init(Default::default());
     info!("Hello World!");
 
-    unwrap!(spawner.spawn(blinky(p.PB2)));
+    spawner.spawn(unwrap!(blinky(p.PB2)));
 
     let mut pwm_input = PwmInput::new_ch1(p.TIM3, p.PA6, Pull::None, khz(10));
     pwm_input.enable();
diff --git a/examples/stm32f4/src/bin/usb_ethernet.rs b/examples/stm32f4/src/bin/usb_ethernet.rs
index 322cb90c7..7abbe8719 100644
--- a/examples/stm32f4/src/bin/usb_ethernet.rs
+++ b/examples/stm32f4/src/bin/usb_ethernet.rs
@@ -118,11 +118,11 @@ async fn main(spawner: Spawner) {
     // Build the builder.
     let usb = builder.build();
 
-    unwrap!(spawner.spawn(usb_task(usb)));
+    spawner.spawn(unwrap!(usb_task(usb)));
 
     static NET_STATE: StaticCell<NetState<MTU, 4, 4>> = StaticCell::new();
     let (runner, device) = class.into_embassy_net_device::<MTU, 4, 4>(NET_STATE.init(NetState::new()), our_mac_addr);
-    unwrap!(spawner.spawn(usb_ncm_task(runner)));
+    spawner.spawn(unwrap!(usb_ncm_task(runner)));
 
     let config = embassy_net::Config::dhcpv4(Default::default());
     //let config = embassy_net::Config::ipv4_static(embassy_net::StaticConfigV4 {
@@ -141,7 +141,7 @@ async fn main(spawner: Spawner) {
     static RESOURCES: StaticCell<StackResources<3>> = StaticCell::new();
     let (stack, runner) = embassy_net::new(device, config, RESOURCES.init(StackResources::new()), seed);
 
-    unwrap!(spawner.spawn(net_task(runner)));
+    spawner.spawn(unwrap!(net_task(runner)));
 
     // And now we can use it!
 
diff --git a/examples/stm32f4/src/bin/usb_uac_speaker.rs b/examples/stm32f4/src/bin/usb_uac_speaker.rs
index 654bec498..79bd2d914 100644
--- a/examples/stm32f4/src/bin/usb_uac_speaker.rs
+++ b/examples/stm32f4/src/bin/usb_uac_speaker.rs
@@ -375,9 +375,9 @@ async fn main(spawner: Spawner) {
     }
 
     // Launch USB audio tasks.
-    unwrap!(spawner.spawn(usb_control_task(control_monitor)));
-    unwrap!(spawner.spawn(usb_streaming_task(stream, sender)));
-    unwrap!(spawner.spawn(usb_feedback_task(feedback)));
-    unwrap!(spawner.spawn(usb_task(usb_device)));
-    unwrap!(spawner.spawn(audio_receiver_task(receiver)));
+    spawner.spawn(unwrap!(usb_control_task(control_monitor)));
+    spawner.spawn(unwrap!(usb_streaming_task(stream, sender)));
+    spawner.spawn(unwrap!(usb_feedback_task(feedback)));
+    spawner.spawn(unwrap!(usb_task(usb_device)));
+    spawner.spawn(unwrap!(audio_receiver_task(receiver)));
 }