1 files changed, 201 insertions, 4 deletions

diff --git a/tests/stm32/src/common.rs b/tests/stm32/src/common.rs
index ca5cb43ac..9c0b8c39e 100644
--- a/tests/stm32/src/common.rs
+++ b/tests/stm32/src/common.rs
@@ -24,6 +24,131 @@ teleprobe_meta::target!(b"iot-stm32u585ai");
 teleprobe_meta::target!(b"nucleo-stm32h563zi");
 #[cfg(feature = "stm32c031c6")]
 teleprobe_meta::target!(b"nucleo-stm32c031c6");
+#[cfg(feature = "stm32l073rz")]
+teleprobe_meta::target!(b"nucleo-stm32l073rz");
+#[cfg(feature = "stm32l152re")]
+teleprobe_meta::target!(b"nucleo-stm32l152re");
+#[cfg(feature = "stm32l4a6zg")]
+teleprobe_meta::target!(b"nucleo-stm32l4a6zg");
+#[cfg(feature = "stm32l4r5zi")]
+teleprobe_meta::target!(b"nucleo-stm32l4r5zi");
+#[cfg(feature = "stm32l552ze")]
+teleprobe_meta::target!(b"nucleo-stm32l552ze");
+
+macro_rules! define_peris {
+    ($($name:ident = $peri:ident,)* $(@irq $irq_name:ident = $irq_code:tt,)*) => {
+        #[allow(unused_macros)]
+        macro_rules! peri {
+            $(
+                ($p:expr, $name) => {
+                    $p.$peri
+                };
+            )*
+        }
+        #[allow(unused_macros)]
+        macro_rules! irqs {
+            $(
+                ($irq_name) => {{
+                    embassy_stm32::bind_interrupts!(struct Irqs $irq_code);
+                    Irqs
+                }};
+            )*
+        }
+
+        #[allow(unused)]
+        #[allow(non_camel_case_types)]
+        pub mod peris {
+            $(
+                pub type $name = embassy_stm32::peripherals::$peri;
+            )*
+        }
+    };
+}
+
+#[cfg(feature = "stm32f103c8")]
+define_peris!(
+    UART = USART1, UART_TX = PA9, UART_RX = PA10, UART_TX_DMA = DMA1_CH4, UART_RX_DMA = DMA1_CH5,
+    SPI = SPI1, SPI_SCK = PA5, SPI_MOSI = PA7, SPI_MISO = PA6, SPI_TX_DMA = DMA1_CH3, SPI_RX_DMA = DMA1_CH2,
+    @irq UART = {USART1 => embassy_stm32::usart::InterruptHandler<embassy_stm32::peripherals::USART1>;},
+);
+#[cfg(feature = "stm32g491re")]
+define_peris!(
+    UART = USART1, UART_TX = PC4, UART_RX = PC5, UART_TX_DMA = DMA1_CH1, UART_RX_DMA = DMA1_CH2,
+    SPI = SPI1, SPI_SCK = PA5, SPI_MOSI = PA7, SPI_MISO = PA6, SPI_TX_DMA = DMA1_CH1, SPI_RX_DMA = DMA1_CH2,
+    @irq UART = {USART1 => embassy_stm32::usart::InterruptHandler<embassy_stm32::peripherals::USART1>;},
+);
+#[cfg(feature = "stm32g071rb")]
+define_peris!(
+    UART = USART1, UART_TX = PC4, UART_RX = PC5, UART_TX_DMA = DMA1_CH1, UART_RX_DMA = DMA1_CH2,
+    SPI = SPI1, SPI_SCK = PA5, SPI_MOSI = PA7, SPI_MISO = PA6, SPI_TX_DMA = DMA1_CH1, SPI_RX_DMA = DMA1_CH2,
+    @irq UART = {USART1 => embassy_stm32::usart::InterruptHandler<embassy_stm32::peripherals::USART1>;},
+);
+#[cfg(feature = "stm32f429zi")]
+define_peris!(
+    UART = USART6, UART_TX = PG14, UART_RX = PG9, UART_TX_DMA = DMA2_CH6, UART_RX_DMA = DMA2_CH1,
+    SPI = SPI1, SPI_SCK = PA5, SPI_MOSI = PA7, SPI_MISO = PA6, SPI_TX_DMA = DMA2_CH3, SPI_RX_DMA = DMA2_CH2,
+    @irq UART = {USART6 => embassy_stm32::usart::InterruptHandler<embassy_stm32::peripherals::USART6>;},
+);
+#[cfg(feature = "stm32wb55rg")]
+define_peris!(
+    UART = LPUART1, UART_TX = PA2, UART_RX = PA3, UART_TX_DMA = DMA1_CH1, UART_RX_DMA = DMA1_CH2,
+    SPI = SPI1, SPI_SCK = PA5, SPI_MOSI = PA7, SPI_MISO = PA6, SPI_TX_DMA = DMA1_CH1, SPI_RX_DMA = DMA1_CH2,
+    @irq UART = {LPUART1 => embassy_stm32::usart::InterruptHandler<embassy_stm32::peripherals::LPUART1>;},
+);
+#[cfg(feature = "stm32h755zi")]
+define_peris!(
+    UART = USART1, UART_TX = PB6, UART_RX = PB7, UART_TX_DMA = DMA1_CH0, UART_RX_DMA = DMA1_CH1,
+    SPI = SPI1, SPI_SCK = PA5, SPI_MOSI = PB5, SPI_MISO = PA6, SPI_TX_DMA = DMA1_CH0, SPI_RX_DMA = DMA1_CH1,
+    @irq UART = {USART1 => embassy_stm32::usart::InterruptHandler<embassy_stm32::peripherals::USART1>;},
+);
+#[cfg(feature = "stm32u585ai")]
+define_peris!(
+    UART = USART3, UART_TX = PD8, UART_RX = PD9, UART_TX_DMA = GPDMA1_CH0, UART_RX_DMA = GPDMA1_CH1,
+    SPI = SPI1, SPI_SCK = PE13, SPI_MOSI = PE15, SPI_MISO = PE14, SPI_TX_DMA = GPDMA1_CH0, SPI_RX_DMA = GPDMA1_CH1,
+    @irq UART = {USART3 => embassy_stm32::usart::InterruptHandler<embassy_stm32::peripherals::USART3>;},
+);
+#[cfg(feature = "stm32h563zi")]
+define_peris!(
+    UART = LPUART1, UART_TX = PB6, UART_RX = PB7, UART_TX_DMA = GPDMA1_CH0, UART_RX_DMA = GPDMA1_CH1,
+    SPI = SPI4, SPI_SCK = PE12, SPI_MOSI = PE14, SPI_MISO = PE13, SPI_TX_DMA = GPDMA1_CH0, SPI_RX_DMA = GPDMA1_CH1,
+    @irq UART = {LPUART1 => embassy_stm32::usart::InterruptHandler<embassy_stm32::peripherals::LPUART1>;},
+);
+#[cfg(feature = "stm32c031c6")]
+define_peris!(
+    UART = USART1, UART_TX = PB6, UART_RX = PB7, UART_TX_DMA = DMA1_CH1, UART_RX_DMA = DMA1_CH2,
+    SPI = SPI1, SPI_SCK = PA5, SPI_MOSI = PA7, SPI_MISO = PA6, SPI_TX_DMA = DMA1_CH1, SPI_RX_DMA = DMA1_CH2,
+    @irq UART = {USART1 => embassy_stm32::usart::InterruptHandler<embassy_stm32::peripherals::USART1>;},
+);
+#[cfg(feature = "stm32l4a6zg")]
+define_peris!(
+    UART = USART3, UART_TX = PD8, UART_RX = PD9, UART_TX_DMA = DMA1_CH2, UART_RX_DMA = DMA1_CH3,
+    SPI = SPI1, SPI_SCK = PA5, SPI_MOSI = PA7, SPI_MISO = PA6, SPI_TX_DMA = DMA1_CH3, SPI_RX_DMA = DMA1_CH2,
+    @irq UART = {USART3 => embassy_stm32::usart::InterruptHandler<embassy_stm32::peripherals::USART3>;},
+);
+#[cfg(feature = "stm32l4r5zi")]
+define_peris!(
+    UART = USART3, UART_TX = PD8, UART_RX = PD9, UART_TX_DMA = DMA1_CH1, UART_RX_DMA = DMA1_CH2,
+    SPI = SPI1, SPI_SCK = PA5, SPI_MOSI = PA7, SPI_MISO = PA6, SPI_TX_DMA = DMA1_CH1, SPI_RX_DMA = DMA1_CH2,
+    @irq UART = {USART3 => embassy_stm32::usart::InterruptHandler<embassy_stm32::peripherals::USART3>;},
+);
+#[cfg(feature = "stm32l073rz")]
+define_peris!(
+    UART = USART4, UART_TX = PA0, UART_RX = PA1, UART_TX_DMA = DMA1_CH3, UART_RX_DMA = DMA1_CH2,
+    SPI = SPI1, SPI_SCK = PA5, SPI_MOSI = PA7, SPI_MISO = PA6, SPI_TX_DMA = DMA1_CH3, SPI_RX_DMA = DMA1_CH2,
+    @irq UART = {USART4_5 => embassy_stm32::usart::InterruptHandler<embassy_stm32::peripherals::USART4>;},
+);
+#[cfg(feature = "stm32l152re")]
+define_peris!(
+    UART = USART3, UART_TX = PB10, UART_RX = PB11, UART_TX_DMA = DMA1_CH2, UART_RX_DMA = DMA1_CH3,
+    SPI = SPI1, SPI_SCK = PA5, SPI_MOSI = PA7, SPI_MISO = PA6, SPI_TX_DMA = DMA1_CH3, SPI_RX_DMA = DMA1_CH2,
+    @irq UART = {USART3 => embassy_stm32::usart::InterruptHandler<embassy_stm32::peripherals::USART3>;},
+);
+#[cfg(feature = "stm32l552ze")]
+define_peris!(
+    UART = USART3, UART_TX = PD8, UART_RX = PD9, UART_TX_DMA = DMA1_CH1, UART_RX_DMA = DMA1_CH2,
+    SPI = SPI1, SPI_SCK = PA5, SPI_MOSI = PA7, SPI_MISO = PA6, SPI_TX_DMA = DMA1_CH1, SPI_RX_DMA = DMA1_CH2,
+    @irq UART = {USART3 => embassy_stm32::usart::InterruptHandler<embassy_stm32::peripherals::USART3>;},
+);
 
 pub fn config() -> Config {
     #[allow(unused_mut)]
@@ -31,14 +156,86 @@ pub fn config() -> Config {
 
     #[cfg(feature = "stm32h755zi")]
     {
-        config.rcc.sys_ck = Some(Hertz(400_000_000));
-        config.rcc.pll1.q_ck = Some(Hertz(100_000_000));
-        config.rcc.adc_clock_source = embassy_stm32::rcc::AdcClockSource::PerCk;
+        use embassy_stm32::rcc::*;
+        config.rcc.hsi = Some(Hsi::Mhz64);
+        config.rcc.csi = true;
+        config.rcc.pll_src = PllSource::Hsi;
+        config.rcc.pll1 = Some(Pll {
+            prediv: 4,
+            mul: 50,
+            divp: Some(2),
+            divq: Some(8), // SPI1 cksel defaults to pll1_q
+            divr: None,
+        });
+        config.rcc.pll2 = Some(Pll {
+            prediv: 4,
+            mul: 50,
+            divp: Some(8), // 100mhz
+            divq: None,
+            divr: None,
+        });
+        config.rcc.sys = Sysclk::Pll1P; // 400 Mhz
+        config.rcc.ahb_pre = AHBPrescaler::DIV2; // 200 Mhz
+        config.rcc.apb1_pre = APBPrescaler::DIV2; // 100 Mhz
+        config.rcc.apb2_pre = APBPrescaler::DIV2; // 100 Mhz
+        config.rcc.apb3_pre = APBPrescaler::DIV2; // 100 Mhz
+        config.rcc.apb4_pre = APBPrescaler::DIV2; // 100 Mhz
+        config.rcc.voltage_scale = VoltageScale::Scale1;
+        config.rcc.adc_clock_source = AdcClockSource::PLL2_P;
+    }
+
+    #[cfg(any(feature = "stm32l4a6zg", feature = "stm32l4r5zi"))]
+    {
+        use embassy_stm32::rcc::*;
+        config.rcc.mux = ClockSrc::PLL(
+            // 72Mhz clock (16 / 1 * 18 / 4)
+            PLLSource::HSI16,
+            PLLClkDiv::Div4,
+            PLLSrcDiv::Div1,
+            PLLMul::Mul18,
+            Some(PLLClkDiv::Div6), // 48Mhz (16 / 1 * 18 / 6)
+        );
+    }
+
+    #[cfg(any(feature = "stm32l552ze"))]
+    {
+        use embassy_stm32::rcc::*;
+        config.rcc.mux = ClockSrc::PLL(
+            // 110Mhz clock (16 / 4 * 55 / 2)
+            PLLSource::HSI16,
+            PLLClkDiv::Div2,
+            PLLSrcDiv::Div4,
+            PLLMul::Mul55,
+            None,
+        );
     }
 
     #[cfg(feature = "stm32u585ai")]
     {
-        config.rcc.mux = embassy_stm32::rcc::ClockSrc::MSI(embassy_stm32::rcc::MSIRange::Range48mhz);
+        use embassy_stm32::rcc::*;
+        config.rcc.mux = ClockSrc::MSI(MSIRange::Range48mhz);
+    }
+
+    #[cfg(feature = "stm32l073rz")]
+    {
+        use embassy_stm32::rcc::*;
+        config.rcc.mux = ClockSrc::PLL(
+            // 32Mhz clock (16 * 4 / 2)
+            PLLSource::HSI16,
+            PLLMul::Mul4,
+            PLLDiv::Div2,
+        );
+    }
+
+    #[cfg(any(feature = "stm32l152re"))]
+    {
+        use embassy_stm32::rcc::*;
+        config.rcc.mux = ClockSrc::PLL(
+            // 32Mhz clock (16 * 4 / 2)
+            PLLSource::HSI,
+            PLLMul::Mul4,
+            PLLDiv::Div2,
+        );
     }
 
     config